Blackfin arch: Start untangling the CPLB handling code.

 - Move cache initialization to C from assembly.
 - Move anomaly workaround for writing [ID]MEM_CONTROL to assembly, so
   that we don't have to mess around with .align directives in C source.
 - Fix a bug where bfin_write_DMEM_CONTROL would write to IMEM_CONTROL
 - Break out CPLB related code from kernel/setup.c into their own file.
 - Don't define variables in header files, only declare them.

Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

1 files changed, 2 insertions, 287 deletions

diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 534227f4da3..07c1cfdc958 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -64,10 +64,6 @@ EXPORT_SYMBOL(mtd_size);
 
 char __initdata command_line[COMMAND_LINE_SIZE];
 
-#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
-static void generate_cpl_tables(void);
-#endif
-
 void __init bf53x_cache_init(void)
 {
 #if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
@@ -401,8 +397,6 @@ void __init setup_arch(char **cmdline_p)
 	_bfin_swrst = bfin_read_SWRST();
 #endif
 
-	bf53x_cache_init();
-
 	printk(KERN_INFO "Hardware Trace Enabled\n");
 	bfin_write_TBUFCTL(0x03);
 
@@ -426,6 +420,8 @@ void __init setup_arch(char **cmdline_p)
 	       != ATOMIC_AND32 - FIXED_CODE_START);
 	BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
 	       != ATOMIC_XOR32 - FIXED_CODE_START);
+
+	bf53x_cache_init();
 }
 
 static int __init topology_init(void)
@@ -443,287 +439,6 @@ static int __init topology_init(void)
 
 subsys_initcall(topology_init);
 
-#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
-static u16 __init lock_kernel_check(u32 start, u32 end)
-{
-	if ((start <= (u32) _stext && end >= (u32) _end)
-	    || (start >= (u32) _stext && end <= (u32) _end))
-		return IN_KERNEL;
-	return 0;
-}
-
-static unsigned short __init
-fill_cplbtab(struct cplb_tab *table,
-	     unsigned long start, unsigned long end,
-	     unsigned long block_size, unsigned long cplb_data)
-{
-	int i;
-
-	switch (block_size) {
-	case SIZE_4M:
-		i = 3;
-		break;
-	case SIZE_1M:
-		i = 2;
-		break;
-	case SIZE_4K:
-		i = 1;
-		break;
-	case SIZE_1K:
-	default:
-		i = 0;
-		break;
-	}
-
-	cplb_data = (cplb_data & ~(3 << 16)) | (i << 16);
-
-	while ((start < end) && (table->pos < table->size)) {
-
-		table->tab[table->pos++] = start;
-
-		if (lock_kernel_check(start, start + block_size) == IN_KERNEL)
-			table->tab[table->pos++] =
-			    cplb_data | CPLB_LOCK | CPLB_DIRTY;
-		else
-			table->tab[table->pos++] = cplb_data;
-
-		start += block_size;
-	}
-	return 0;
-}
-
-static unsigned short __init
-close_cplbtab(struct cplb_tab *table)
-{
-
-	while (table->pos < table->size) {
-
-		table->tab[table->pos++] = 0;
-		table->tab[table->pos++] = 0; /* !CPLB_VALID */
-	}
-	return 0;
-}
-
-/* helper function */
-static void __fill_code_cplbtab(struct cplb_tab *t, int i,
-				u32 a_start, u32 a_end)
-{
-	if (cplb_data[i].psize) {
-		fill_cplbtab(t,
-				cplb_data[i].start,
-				cplb_data[i].end,
-				cplb_data[i].psize,
-				cplb_data[i].i_conf);
-	} else {
-#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
-		if (i == SDRAM_KERN) {
-			fill_cplbtab(t,
-					cplb_data[i].start,
-					cplb_data[i].end,
-					SIZE_4M,
-					cplb_data[i].i_conf);
-		} else
-#endif
-		{
-			fill_cplbtab(t,
-					cplb_data[i].start,
-					a_start,
-					SIZE_1M,
-					cplb_data[i].i_conf);
-			fill_cplbtab(t,
-					a_start,
-					a_end,
-					SIZE_4M,
-					cplb_data[i].i_conf);
-			fill_cplbtab(t, a_end,
-					cplb_data[i].end,
-					SIZE_1M,
-					cplb_data[i].i_conf);
-		}
-	}
-}
-
-static void __fill_data_cplbtab(struct cplb_tab *t, int i,
-				u32 a_start, u32 a_end)
-{
-	if (cplb_data[i].psize) {
-		fill_cplbtab(t,
-				cplb_data[i].start,
-				cplb_data[i].end,
-				cplb_data[i].psize,
-				cplb_data[i].d_conf);
-	} else {
-		fill_cplbtab(t,
-				cplb_data[i].start,
-				a_start, SIZE_1M,
-				cplb_data[i].d_conf);
-		fill_cplbtab(t, a_start,
-				a_end, SIZE_4M,
-				cplb_data[i].d_conf);
-		fill_cplbtab(t, a_end,
-				cplb_data[i].end,
-				SIZE_1M,
-				cplb_data[i].d_conf);
-	}
-}
-static void __init generate_cpl_tables(void)
-{
-
-	u16 i, j, process;
-	u32 a_start, a_end, as, ae, as_1m;
-
-	struct cplb_tab *t_i = NULL;
-	struct cplb_tab *t_d = NULL;
-	struct s_cplb cplb;
-
-	cplb.init_i.size = MAX_CPLBS;
-	cplb.init_d.size = MAX_CPLBS;
-	cplb.switch_i.size = MAX_SWITCH_I_CPLBS;
-	cplb.switch_d.size = MAX_SWITCH_D_CPLBS;
-
-	cplb.init_i.pos = 0;
-	cplb.init_d.pos = 0;
-	cplb.switch_i.pos = 0;
-	cplb.switch_d.pos = 0;
-
-	cplb.init_i.tab = icplb_table;
-	cplb.init_d.tab = dcplb_table;
-	cplb.switch_i.tab = ipdt_table;
-	cplb.switch_d.tab = dpdt_table;
-
-	cplb_data[SDRAM_KERN].end = memory_end;
-
-#ifdef CONFIG_MTD_UCLINUX
-	cplb_data[SDRAM_RAM_MTD].start = memory_mtd_start;
-	cplb_data[SDRAM_RAM_MTD].end = memory_mtd_start + mtd_size;
-	cplb_data[SDRAM_RAM_MTD].valid = mtd_size > 0;
-# if defined(CONFIG_ROMFS_FS)
-	cplb_data[SDRAM_RAM_MTD].attr |= I_CPLB;
-
-	/*
-	 * The ROMFS_FS size is often not multiple of 1MB.
-	 * This can cause multiple CPLB sets covering the same memory area.
-	 * This will then cause multiple CPLB hit exceptions.
-	 * Workaround: We ensure a contiguous memory area by extending the kernel
-	 * memory section over the mtd section.
-	 * For ROMFS_FS memory must be covered with ICPLBs anyways.
-	 * So there is no difference between kernel and mtd memory setup.
-	 */
-
-	cplb_data[SDRAM_KERN].end = memory_mtd_start + mtd_size;;
-	cplb_data[SDRAM_RAM_MTD].valid = 0;
-
-# endif
-#else
-	cplb_data[SDRAM_RAM_MTD].valid = 0;
-#endif
-
-	cplb_data[SDRAM_DMAZ].start = _ramend - DMA_UNCACHED_REGION;
-	cplb_data[SDRAM_DMAZ].end = _ramend;
-
-	cplb_data[RES_MEM].start = _ramend;
-	cplb_data[RES_MEM].end = physical_mem_end;
-
-	if (reserved_mem_dcache_on)
-		cplb_data[RES_MEM].d_conf = SDRAM_DGENERIC;
-	else
-		cplb_data[RES_MEM].d_conf = SDRAM_DNON_CHBL;
-
-	if (reserved_mem_icache_on)
-		cplb_data[RES_MEM].i_conf = SDRAM_IGENERIC;
-	else
-		cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL;
-
-	for (i = ZERO_P; i <= L2_MEM; i++) {
-		if (!cplb_data[i].valid)
-			continue;
-
-		as_1m = cplb_data[i].start % SIZE_1M;
-
-		/*
-		 * We need to make sure all sections are properly 1M aligned
-		 * However between Kernel Memory and the Kernel mtd section,
-		 * depending on the rootfs size, there can be overlapping
-		 * memory areas.
-		 */
-
-		if (as_1m && i != L1I_MEM && i != L1D_MEM) {
-#ifdef CONFIG_MTD_UCLINUX
-			if (i == SDRAM_RAM_MTD) {
-				if ((cplb_data[SDRAM_KERN].end + 1) >
-						cplb_data[SDRAM_RAM_MTD].start)
-					cplb_data[SDRAM_RAM_MTD].start =
-						(cplb_data[i].start &
-						 (-2*SIZE_1M)) + SIZE_1M;
-				else
-					cplb_data[SDRAM_RAM_MTD].start =
-						(cplb_data[i].start &
-						 (-2*SIZE_1M));
-			} else
-#endif
-				printk(KERN_WARNING
-					"Unaligned Start of %s at 0x%X\n",
-					cplb_data[i].name, cplb_data[i].start);
-		}
-
-		as = cplb_data[i].start % SIZE_4M;
-		ae = cplb_data[i].end % SIZE_4M;
-
-		if (as)
-			a_start = cplb_data[i].start + (SIZE_4M - (as));
-		else
-			a_start = cplb_data[i].start;
-
-		a_end = cplb_data[i].end - ae;
-
-		for (j = INITIAL_T; j <= SWITCH_T; j++) {
-
-			switch (j) {
-			case INITIAL_T:
-				if (cplb_data[i].attr & INITIAL_T) {
-					t_i = &cplb.init_i;
-					t_d = &cplb.init_d;
-					process = 1;
-				} else
-					process = 0;
-				break;
-			case SWITCH_T:
-				if (cplb_data[i].attr & SWITCH_T) {
-					t_i = &cplb.switch_i;
-					t_d = &cplb.switch_d;
-					process = 1;
-				} else
-					process = 0;
-				break;
-			default:
-					process = 0;
-				break;
-			}
-
-			if (!process)
-				continue;
-			if (cplb_data[i].attr & I_CPLB)
-				__fill_code_cplbtab(t_i, i, a_start, a_end);
-
-			if (cplb_data[i].attr & D_CPLB)
-				__fill_data_cplbtab(t_d, i, a_start, a_end);
-		}
-	}
-
-/* close tables */
-
-	close_cplbtab(&cplb.init_i);
-	close_cplbtab(&cplb.init_d);
-
-	cplb.init_i.tab[cplb.init_i.pos] = -1;
-	cplb.init_d.tab[cplb.init_d.pos] = -1;
-	cplb.switch_i.tab[cplb.switch_i.pos] = -1;
-	cplb.switch_d.tab[cplb.switch_d.pos] = -1;
-
-}
-
-#endif
-
 static u_long get_vco(void)
 {
 	u_long msel;