Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (60 commits)
  Blackfin arch: make sure we include the fix for SPORT hysteresis when reprogramming clocks
  Blackfin arch: Fix bogus str_ident check in gpio code
  Blackfin arch: AD7879 Touchscreen driver
  Blackfin arch: introducing bfin_addr_dcachable
  Blackfin arch: fix a typo in comments
  Blackfin arch: Remove useless head file
  Blackfin arch: make sure L2 start and length are always defined (fixes building on BF542)
  Blackfin arch: use the Blackfin on-chip ROM to do software reset when possible
  Blackfin arch: update anomaly headers to match the latest sheet
  Blackfin arch: bfin_reset() is an internal reboot function ... everyone should go through machine_restart()
  Blackfin arch: print out error/warning if you are running on the incorrect CPU type
  Blackfin arch: remove non-bf54x ifdef logic since this file is only compiled on bf54x parts
  Blackfin arch: update board defconfigs
  Blackfin arch: Add optional verbose debug
  Blackfin arch: emulate a TTY over the EMUDAT/JTAG interface
  Blackfin arch: have is_user_addr_valid() check for overflows (like when address is -1)
  Blackfin arch: ptrace - fix off-by-one check on end of memory regions
  Blackfin arch: Enable framebuffer support for the BF526-EZkit TFT LCD display
  Blackfin arch: flash memory map and dm9000 resources updating
  Blackfin arch: early prink code still use uart core console functions to parse and set configure option string
  ...

1 files changed, 48 insertions, 5 deletions

diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 762f754c06c..8ee2b744e23 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -42,10 +42,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/sl811.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 #include <linux/usb/musb.h>
-#endif
-#include <asm/cplb.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
@@ -129,6 +126,16 @@ static struct resource musb_resources[] = {
 	},
 };
 
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 7,
+	.dma_channels	= 7,
+	.gpio_vrsel	= GPIO_PG13,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
 	.mode		= MUSB_OTG,
@@ -137,7 +144,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 	.mode		= MUSB_PERIPHERAL,
 #endif
-	.multipoint	= 0,
+	.config		= &musb_config,
 };
 
 static u64 musb_dmamask = ~(u32)0;
@@ -218,7 +225,7 @@ static struct mtd_partition partition_info[] = {
 	{
 		.name = "linux kernel(nand)",
 		.offset = 0,
-		.size = 4 * SIZE_1M,
+		.size = 4 * 1024 * 1024,
 	},
 	{
 		.name = "file system(nand)",
@@ -846,6 +853,38 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#include <linux/input.h>
+#include <asm/bfin_rotary.h>
+
+static struct bfin_rotary_platform_data bfin_rotary_data = {
+	/*.rotary_up_key     = KEY_UP,*/
+	/*.rotary_down_key   = KEY_DOWN,*/
+	.rotary_rel_code   = REL_WHEEL,
+	.rotary_button_key = KEY_ENTER,
+	.debounce	   = 10,	/* 0..17 */
+	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
+};
+
+static struct resource bfin_rotary_resources[] = {
+	{
+		.start = IRQ_CNT,
+		.end = IRQ_CNT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_rotary_device = {
+	.name		= "bfin-rotary",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bfin_rotary_resources),
+	.resource 	= bfin_rotary_resources,
+	.dev		= {
+		.platform_data = &bfin_rotary_data,
+	},
+};
+#endif
+
 static struct resource bfin_gpios_resources = {
 	.start = 0,
 	.end   = MAX_BLACKFIN_GPIOS - 1,
@@ -962,6 +1001,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_device_gpiokeys,
 #endif
 
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+	&bfin_rotary_device,
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&ezkit_flash_device,
 #endif