Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (60 commits)
  Blackfin arch: make sure we include the fix for SPORT hysteresis when reprogramming clocks
  Blackfin arch: Fix bogus str_ident check in gpio code
  Blackfin arch: AD7879 Touchscreen driver
  Blackfin arch: introducing bfin_addr_dcachable
  Blackfin arch: fix a typo in comments
  Blackfin arch: Remove useless head file
  Blackfin arch: make sure L2 start and length are always defined (fixes building on BF542)
  Blackfin arch: use the Blackfin on-chip ROM to do software reset when possible
  Blackfin arch: update anomaly headers to match the latest sheet
  Blackfin arch: bfin_reset() is an internal reboot function ... everyone should go through machine_restart()
  Blackfin arch: print out error/warning if you are running on the incorrect CPU type
  Blackfin arch: remove non-bf54x ifdef logic since this file is only compiled on bf54x parts
  Blackfin arch: update board defconfigs
  Blackfin arch: Add optional verbose debug
  Blackfin arch: emulate a TTY over the EMUDAT/JTAG interface
  Blackfin arch: have is_user_addr_valid() check for overflows (like when address is -1)
  Blackfin arch: ptrace - fix off-by-one check on end of memory regions
  Blackfin arch: Enable framebuffer support for the BF526-EZkit TFT LCD display
  Blackfin arch: flash memory map and dm9000 resources updating
  Blackfin arch: early prink code still use uart core console functions to parse and set configure option string
  ...

1 files changed, 7 insertions, 45 deletions

diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index 4d5cfeacb12..051b05c8802 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -73,25 +73,19 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-#if defined(CONFIG_BF54x)
+	/* enable self refresh via SRREQ */
 	P2.H = hi(EBIU_RSTCTL);
 	P2.L = lo(EBIU_RSTCTL);
 	R0 = [P2];
 	BITSET (R0, 3);
-#else
-	P2.H = hi(EBIU_SDGCTL);
-	P2.L = lo(EBIU_SDGCTL);
-	R0 = [P2];
-	BITSET (R0, 24);
-#endif
 	[P2] = R0;
 	SSYNC;
-#if defined(CONFIG_BF54x)
+
+	/* wait for SRACK bit to be set */
 .LSRR_MODE:
 	R0 = [P2];
 	CC = BITTST(R0, 4);
 	if !CC JUMP .LSRR_MODE;
-#endif
 
 	r0 = CONFIG_VCO_MULT & 63;       /* Load the VCO multiplier         */
 	r0 = r0 << 9;                    /* Shift it over,                  */
@@ -100,6 +94,9 @@ ENTRY(_start_dma_code)
 	r1 = PLL_BYPASS;                 /* Bypass the PLL?                 */
 	r1 = r1 << 8;                    /* Shift it over                   */
 	r0 = r1 | r0;                    /* add them all together           */
+#ifdef ANOMALY_05000265
+	r0 = BITSET(r0, 15);             /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
 
 	p0.h = hi(PLL_CTL);
 	p0.l = lo(PLL_CTL);              /* Load the address                */
@@ -123,7 +120,7 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-#if defined(CONFIG_BF54x)
+	/* disable self refresh by clearing SRREQ */
 	P2.H = hi(EBIU_RSTCTL);
 	P2.L = lo(EBIU_RSTCTL);
 	R0 = [P2];
@@ -155,41 +152,6 @@ ENTRY(_start_dma_code)
 	r0.h = hi(mem_DDRCTL2);
 	[p0] = r0;
 	ssync;
-#else
-	p0.l = lo(EBIU_SDRRC);
-	p0.h = hi(EBIU_SDRRC);
-	r0 = mem_SDRRC;
-	w[p0] = r0.l;
-	ssync;
-
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
-	P2.H = hi(EBIU_SDGCTL);
-	P2.L = lo(EBIU_SDGCTL);
-	R0 = [P2];
-	BITCLR (R0, 24);
-	p0.h = hi(EBIU_SDSTAT);
-	p0.l = lo(EBIU_SDSTAT);
-	r2.l = w[p0];
-	cc = bittst(r2,3);
-	if !cc jump .Lskip;
-	NOP;
-	BITSET (R0, 23);
-.Lskip:
-	[P2] = R0;
-	SSYNC;
-
-	R0.L = lo(mem_SDGCTL);
-	R0.H = hi(mem_SDGCTL);
-	R1 = [p2];
-	R1 = R1 | R0;
-	[P2] = R1;
-	SSYNC;
-#endif
 
 	RTS;
 ENDPROC(_start_dma_code)