CRIS: Rearrange Kconfigs for v10 and v32 to allow compilation without warnings.

- Remove some unneeded configs and add some new ones.
- Merge common config items to common file instead of duplicating them.
- Pull in standard Kconfig.preempt.
- Remove some unneeded Kconfigs for subsystems not (yet) available on CRIS
  (md, scsi, ieee1394, i2o, isdn, telephony, media, pcmcia, pci)
- Rename CRISv32 config items which had different types from CRISv10.
  (ETRAX_LED2G, ETRAX_LED2R, ETRAX_LED3G, ETRAX_LED3R, ETRAX_I2C_DATA_PORT,
  ETRAX_I2C_CLK_PORT)

2 files changed, 4 insertions, 217 deletions

diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
index 1d61faec77c..adc164e9933 100644
--- a/arch/cris/arch-v10/Kconfig
+++ b/arch/cris/arch-v10/Kconfig
@@ -1,5 +1,7 @@
 if ETRAX_ARCH_V10
 
+menu "CRIS v10 options"
+
 # ETRAX 100LX v1 has a MMU "feature" requiring a low mapping
 config CRIS_LOW_MAP
 	bool
@@ -228,69 +230,6 @@ config ETRAX_LED12R
 	  For products with only one or two controllable LEDs,
 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
 
-choice
-	prompt "Product debug-port"
-	depends on ETRAX_ARCH_V10
-	default ETRAX_DEBUG_PORT0
-
-config ETRAX_DEBUG_PORT0
-	bool "Serial-0"
-	help
-	  Choose a serial port for the ETRAX debug console.  Default to
-	  port 0.
-
-config ETRAX_DEBUG_PORT1
-	bool "Serial-1"
-	help
-	  Use serial port 1 for the console.
-
-config ETRAX_DEBUG_PORT2
-	bool "Serial-2"
-	help
-	  Use serial port 2 for the console.
-
-config ETRAX_DEBUG_PORT3
-	bool "Serial-3"
-	help
-	  Use serial port 3 for the console.
-
-config ETRAX_DEBUG_PORT_NULL
-	bool "disabled"
-	help
-	  Disable serial-port debugging.
-
-endchoice
-
-choice
-	prompt "Kernel GDB port"
-	depends on ETRAX_KGDB
-	default ETRAX_KGDB_PORT0
-	help
-	  Choose a serial port for kernel debugging.  NOTE: This port should
-	  not be enabled under Drivers for built-in interfaces (as it has its
-	  own initialization code) and should not be the same as the debug port.
-
-config ETRAX_KGDB_PORT0
-	bool "Serial-0"
-	help
-	  Use serial port 0 for kernel debugging.
-
-config ETRAX_KGDB_PORT1
-	bool "Serial-1"
-	help
-	  Use serial port 1 for kernel debugging.
-
-config ETRAX_KGDB_PORT2
-	bool "Serial-2"
-	help
-	  Use serial port 2 for kernel debugging.
-
-config ETRAX_KGDB_PORT3
-	bool "Serial-3"
-	help
-	  Use serial port 3 for kernel debugging.
-
-endchoice
 
 choice
 	prompt "Product rescue-port"
@@ -454,4 +393,6 @@ config ETRAX_POWERBUTTON_BIT
 	help
 	  Configure where power button is connected.
 
+endmenu
+
 endif
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 96740ef497d..10e9b507c1b 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -9,37 +9,6 @@ config ETRAX_ETHERNET
 	  This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
 	  controller.
 
-choice
-	prompt "Network LED behavior"
-	depends on ETRAX_ETHERNET
-	default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
-
-config ETRAX_NETWORK_LED_ON_WHEN_LINK
-	bool "LED_on_when_link"
-	help
-	  Selecting LED_on_when_link will light the LED when there is a
-	  connection and will flash off when there is activity.
-
-	  Selecting LED_on_when_activity will light the LED only when
-	  there is activity.
-
-	  This setting will also affect the behaviour of other activity LEDs
-	  e.g. Bluetooth.
-
-config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
-	bool "LED_on_when_activity"
-	help
-	  Selecting LED_on_when_link will light the LED when there is a
-	  connection and will flash off when there is activity.
-
-	  Selecting LED_on_when_activity will light the LED only when
-	  there is activity.
-
-	  This setting will also affect the behaviour of other activity LEDs
-	  e.g. Bluetooth.
-
-endchoice
-
 config ETRAX_SERIAL
 	bool "Serial-port support"
 	depends on ETRAX_ARCH_V10
@@ -84,32 +53,6 @@ config ETRAX_SERIAL_PORT0
 	  the same DMA channels.
 
 choice
-	prompt "Ser0 DMA out assignment"
-	depends on ETRAX_SERIAL_PORT0
-	default ETRAX_SERIAL_PORT0_DMA6_OUT
-
-config ETRAX_SERIAL_PORT0_NO_DMA_OUT
-	bool "No DMA out"
-
-config ETRAX_SERIAL_PORT0_DMA6_OUT
-	bool "DMA 6"
-
-endchoice
-
-choice
-	prompt "Ser0 DMA in assignment"
-	depends on ETRAX_SERIAL_PORT0
-	default ETRAX_SERIAL_PORT0_DMA7_IN
-
-config ETRAX_SERIAL_PORT0_NO_DMA_IN
-	bool "No DMA in"
-
-config ETRAX_SERIAL_PORT0_DMA7_IN
-	bool "DMA 7"
-
-endchoice
-
-choice
 	prompt "Ser0 DTR, RI, DSR and CD assignment"
 	depends on ETRAX_SERIAL_PORT0
 	default ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE
@@ -198,32 +141,6 @@ config ETRAX_SERIAL_PORT1
 	  Enables the ETRAX 100 serial driver for ser1 (ttyS1).
 
 choice
-	prompt "Ser1 DMA out assignment"
-	depends on ETRAX_SERIAL_PORT1
-	default ETRAX_SERIAL_PORT1_DMA8_OUT
-
-config ETRAX_SERIAL_PORT1_NO_DMA_OUT
-	bool "No DMA out"
-
-config ETRAX_SERIAL_PORT1_DMA8_OUT
-	bool "DMA 8"
-
-endchoice
-
-choice
-	prompt "Ser1 DMA in assignment"
-	depends on ETRAX_SERIAL_PORT1
-	default ETRAX_SERIAL_PORT1_DMA9_IN
-
-config ETRAX_SERIAL_PORT1_NO_DMA_IN
-	bool "No DMA in"
-
-config ETRAX_SERIAL_PORT1_DMA9_IN
-	bool "DMA 9"
-
-endchoice
-
-choice
 	prompt "Ser1 DTR, RI, DSR and CD assignment"
 	depends on ETRAX_SERIAL_PORT1
 	default ETRAX_SER1_DTR_RI_DSR_CD_ON_NONE
@@ -315,32 +232,6 @@ config ETRAX_SERIAL_PORT2
 	  Enables the ETRAX 100 serial driver for ser2 (ttyS2).
 
 choice
-	prompt "Ser2 DMA out assignment"
-	depends on ETRAX_SERIAL_PORT2
-	default ETRAX_SERIAL_PORT2_DMA2_OUT
-
-config ETRAX_SERIAL_PORT2_NO_DMA_OUT
-	bool "No DMA out"
-
-config ETRAX_SERIAL_PORT2_DMA2_OUT
-	bool "DMA 2"
-
-endchoice
-
-choice
-	prompt "Ser2 DMA in assignment"
-	depends on ETRAX_SERIAL_PORT2
-	default ETRAX_SERIAL_PORT2_DMA3_IN
-
-config ETRAX_SERIAL_PORT2_NO_DMA_IN
-	bool "No DMA in"
-
-config ETRAX_SERIAL_PORT2_DMA3_IN
-	bool "DMA 3"
-
-endchoice
-
-choice
 	prompt "Ser2 DTR, RI, DSR and CD assignment"
 	depends on ETRAX_SERIAL_PORT2
 	default ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE
@@ -429,32 +320,6 @@ config ETRAX_SERIAL_PORT3
 	  Enables the ETRAX 100 serial driver for ser3 (ttyS3).
 
 choice
-	prompt "Ser3 DMA out assignment"
-	depends on ETRAX_SERIAL_PORT3
-	default ETRAX_SERIAL_PORT3_DMA4_OUT
-
-config ETRAX_SERIAL_PORT3_NO_DMA_OUT
-	bool "No DMA out"
-
-config ETRAX_SERIAL_PORT3_DMA4_OUT
-	bool "DMA 4"
-
-endchoice
-
-choice
-	prompt "Ser3 DMA in assignment"
-	depends on ETRAX_SERIAL_PORT3
-	default ETRAX_SERIAL_PORT3_DMA5_IN
-
-config ETRAX_SERIAL_PORT3_NO_DMA_IN
-	bool "No DMA in"
-
-config ETRAX_SERIAL_PORT3_DMA5_IN
-	bool "DMA 5"
-
-endchoice
-
-choice
 	prompt "Ser3 DTR, RI, DSR and CD assignment"
 	depends on ETRAX_SERIAL_PORT3
 	default ETRAX_SER3_DTR_RI_DSR_CD_ON_NONE
@@ -743,25 +608,6 @@ config ETRAX_RTC
 	  normal time reading should be done using libc function time and
 	  friends.
 
-choice
-	prompt "RTC chip"
-	depends on ETRAX_RTC
-	default ETRAX_DS1302
-
-config ETRAX_DS1302
-	bool "DS1302"
-	help
-	  Enables the driver for the DS1302 Real-Time Clock battery-backed
-	  chip on some products.
-
-config ETRAX_PCF8563
-	bool "PCF8563"
-	help
-	  Enables the driver for the PCF8563 Real-Time Clock battery-backed
-	  chip on some products.
-
-endchoice
-
 config ETRAX_DS1302_RST_ON_GENERIC_PORT
 	bool "DS1302 RST on Generic Port"
 	depends on ETRAX_DS1302