Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (156 commits)
  [PATCH] x86-64: Export smp_call_function_single
  [PATCH] i386: Clean up smp_tune_scheduling()
  [PATCH] unwinder: move .eh_frame to RODATA
  [PATCH] unwinder: fully support linker generated .eh_frame_hdr section
  [PATCH] x86-64: don't use set_irq_regs()
  [PATCH] x86-64: check vector in setup_ioapic_dest to verify if need setup_IO_APIC_irq
  [PATCH] x86-64: Make ix86 default to HIGHMEM4G instead of NOHIGHMEM
  [PATCH] i386: replace kmalloc+memset with kzalloc
  [PATCH] x86-64: remove remaining pc98 code
  [PATCH] x86-64: remove unused variable
  [PATCH] x86-64: Fix constraints in atomic_add_return()
  [PATCH] x86-64: fix asm constraints in i386 atomic_add_return
  [PATCH] x86-64: Correct documentation for bzImage protocol v2.05
  [PATCH] x86-64: replace kmalloc+memset with kzalloc in MTRR code
  [PATCH] x86-64: Fix numaq build error
  [PATCH] x86-64: include/asm-x86_64/cpufeature.h isn't a userspace header
  [PATCH] unwinder: Add debugging output to the Dwarf2 unwinder
  [PATCH] x86-64: Clarify error message in GART code
  [PATCH] x86-64: Fix interrupt race in idle callback (3rd try)
  [PATCH] x86-64: Remove unwind stack pointer alignment forcing again
  ...

Fixed conflict in include/linux/uaccess.h manually

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 12 insertions, 840 deletions

diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 97bb869307b..79df6e612db 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -63,9 +63,6 @@
 #include <setup_arch.h>
 #include <bios_ebda.h>
 
-/* Forward Declaration. */
-void __init find_max_pfn(void);
-
 /* This value is set up by the early boot code to point to the value
    immediately after the boot time page tables.  It contains a *physical*
    address, and must not be in the .bss segment! */
@@ -76,11 +73,8 @@ int disable_pse __devinitdata = 0;
 /*
  * Machine setup..
  */
-
-#ifdef CONFIG_EFI
-int efi_enabled = 0;
-EXPORT_SYMBOL(efi_enabled);
-#endif
+extern struct resource code_resource;
+extern struct resource data_resource;
 
 /* cpu data as detected by the assembly code in head.S */
 struct cpuinfo_x86 new_cpu_data __initdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
@@ -99,12 +93,6 @@ unsigned int machine_submodel_id;
 unsigned int BIOS_revision;
 unsigned int mca_pentium_flag;
 
-/* For PCI or other memory-mapped resources */
-unsigned long pci_mem_start = 0x10000000;
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL(pci_mem_start);
-#endif
-
 /* Boot loader ID as an integer, for the benefit of proc_dointvec */
 int bootloader_type;
 
@@ -134,7 +122,6 @@ struct ist_info ist_info;
 	defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
 EXPORT_SYMBOL(ist_info);
 #endif
-struct e820map e820;
 
 extern void early_cpu_init(void);
 extern int root_mountflags;
@@ -149,516 +136,6 @@ static char command_line[COMMAND_LINE_SIZE];
 
 unsigned char __initdata boot_params[PARAM_SIZE];
 
-static struct resource data_resource = {
-	.name	= "Kernel data",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource code_resource = {
-	.name	= "Kernel code",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource system_rom_resource = {
-	.name	= "System ROM",
-	.start	= 0xf0000,
-	.end	= 0xfffff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-};
-
-static struct resource extension_rom_resource = {
-	.name	= "Extension ROM",
-	.start	= 0xe0000,
-	.end	= 0xeffff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-};
-
-static struct resource adapter_rom_resources[] = { {
-	.name 	= "Adapter ROM",
-	.start	= 0xc8000,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
-	.name 	= "Adapter ROM",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
-	.name 	= "Adapter ROM",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
-	.name 	= "Adapter ROM",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
-	.name 	= "Adapter ROM",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
-	.name 	= "Adapter ROM",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-} };
-
-static struct resource video_rom_resource = {
-	.name 	= "Video ROM",
-	.start	= 0xc0000,
-	.end	= 0xc7fff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-};
-
-static struct resource video_ram_resource = {
-	.name	= "Video RAM area",
-	.start	= 0xa0000,
-	.end	= 0xbffff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource standard_io_resources[] = { {
-	.name	= "dma1",
-	.start	= 0x0000,
-	.end	= 0x001f,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "pic1",
-	.start	= 0x0020,
-	.end	= 0x0021,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name   = "timer0",
-	.start	= 0x0040,
-	.end    = 0x0043,
-	.flags  = IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name   = "timer1",
-	.start  = 0x0050,
-	.end    = 0x0053,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "keyboard",
-	.start	= 0x0060,
-	.end	= 0x006f,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "dma page reg",
-	.start	= 0x0080,
-	.end	= 0x008f,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "pic2",
-	.start	= 0x00a0,
-	.end	= 0x00a1,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "dma2",
-	.start	= 0x00c0,
-	.end	= 0x00df,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "fpu",
-	.start	= 0x00f0,
-	.end	= 0x00ff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-} };
-
-#define romsignature(x) (*(unsigned short *)(x) == 0xaa55)
-
-static int __init romchecksum(unsigned char *rom, unsigned long length)
-{
-	unsigned char *p, sum = 0;
-
-	for (p = rom; p < rom + length; p++)
-		sum += *p;
-	return sum == 0;
-}
-
-static void __init probe_roms(void)
-{
-	unsigned long start, length, upper;
-	unsigned char *rom;
-	int	      i;
-
-	/* video rom */
-	upper = adapter_rom_resources[0].start;
-	for (start = video_rom_resource.start; start < upper; start += 2048) {
-		rom = isa_bus_to_virt(start);
-		if (!romsignature(rom))
-			continue;
-
-		video_rom_resource.start = start;
-
-		/* 0 < length <= 0x7f * 512, historically */
-		length = rom[2] * 512;
-
-		/* if checksum okay, trust length byte */
-		if (length && romchecksum(rom, length))
-			video_rom_resource.end = start + length - 1;
-
-		request_resource(&iomem_resource, &video_rom_resource);
-		break;
-	}
-
-	start = (video_rom_resource.end + 1 + 2047) & ~2047UL;
-	if (start < upper)
-		start = upper;
-
-	/* system rom */
-	request_resource(&iomem_resource, &system_rom_resource);
-	upper = system_rom_resource.start;
-
-	/* check for extension rom (ignore length byte!) */
-	rom = isa_bus_to_virt(extension_rom_resource.start);
-	if (romsignature(rom)) {
-		length = extension_rom_resource.end - extension_rom_resource.start + 1;
-		if (romchecksum(rom, length)) {
-			request_resource(&iomem_resource, &extension_rom_resource);
-			upper = extension_rom_resource.start;
-		}
-	}
-
-	/* check for adapter roms on 2k boundaries */
-	for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; start += 2048) {
-		rom = isa_bus_to_virt(start);
-		if (!romsignature(rom))
-			continue;
-
-		/* 0 < length <= 0x7f * 512, historically */
-		length = rom[2] * 512;
-
-		/* but accept any length that fits if checksum okay */
-		if (!length || start + length > upper || !romchecksum(rom, length))
-			continue;
-
-		adapter_rom_resources[i].start = start;
-		adapter_rom_resources[i].end = start + length - 1;
-		request_resource(&iomem_resource, &adapter_rom_resources[i]);
-
-		start = adapter_rom_resources[i++].end & ~2047UL;
-	}
-}
-
-static void __init limit_regions(unsigned long long size)
-{
-	unsigned long long current_addr = 0;
-	int i;
-
-	if (efi_enabled) {
-		efi_memory_desc_t *md;
-		void *p;
-
-		for (p = memmap.map, i = 0; p < memmap.map_end;
-			p += memmap.desc_size, i++) {
-			md = p;
-			current_addr = md->phys_addr + (md->num_pages << 12);
-			if (md->type == EFI_CONVENTIONAL_MEMORY) {
-				if (current_addr >= size) {
-					md->num_pages -=
-						(((current_addr-size) + PAGE_SIZE-1) >> PAGE_SHIFT);
-					memmap.nr_map = i + 1;
-					return;
-				}
-			}
-		}
-	}
-	for (i = 0; i < e820.nr_map; i++) {
-		current_addr = e820.map[i].addr + e820.map[i].size;
-		if (current_addr < size)
-			continue;
-
-		if (e820.map[i].type != E820_RAM)
-			continue;
-
-		if (e820.map[i].addr >= size) {
-			/*
-			 * This region starts past the end of the
-			 * requested size, skip it completely.
-			 */
-			e820.nr_map = i;
-		} else {
-			e820.nr_map = i + 1;
-			e820.map[i].size -= current_addr - size;
-		}
-		return;
-	}
-}
-
-void __init add_memory_region(unsigned long long start,
-			      unsigned long long size, int type)
-{
-	int x;
-
-	if (!efi_enabled) {
-       		x = e820.nr_map;
-
-		if (x == E820MAX) {
-		    printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
-		    return;
-		}
-
-		e820.map[x].addr = start;
-		e820.map[x].size = size;
-		e820.map[x].type = type;
-		e820.nr_map++;
-	}
-} /* add_memory_region */
-
-#define E820_DEBUG	1
-
-static void __init print_memory_map(char *who)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		printk(" %s: %016Lx - %016Lx ", who,
-			e820.map[i].addr,
-			e820.map[i].addr + e820.map[i].size);
-		switch (e820.map[i].type) {
-		case E820_RAM:	printk("(usable)\n");
-				break;
-		case E820_RESERVED:
-				printk("(reserved)\n");
-				break;
-		case E820_ACPI:
-				printk("(ACPI data)\n");
-				break;
-		case E820_NVS:
-				printk("(ACPI NVS)\n");
-				break;
-		default:	printk("type %lu\n", e820.map[i].type);
-				break;
-		}
-	}
-}
-
-/*
- * Sanitize the BIOS e820 map.
- *
- * Some e820 responses include overlapping entries.  The following 
- * replaces the original e820 map with a new one, removing overlaps.
- *
- */
-struct change_member {
-	struct e820entry *pbios; /* pointer to original bios entry */
-	unsigned long long addr; /* address for this change point */
-};
-static struct change_member change_point_list[2*E820MAX] __initdata;
-static struct change_member *change_point[2*E820MAX] __initdata;
-static struct e820entry *overlap_list[E820MAX] __initdata;
-static struct e820entry new_bios[E820MAX] __initdata;
-
-int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map)
-{
-	struct change_member *change_tmp;
-	unsigned long current_type, last_type;
-	unsigned long long last_addr;
-	int chgidx, still_changing;
-	int overlap_entries;
-	int new_bios_entry;
-	int old_nr, new_nr, chg_nr;
-	int i;
-
-	/*
-		Visually we're performing the following (1,2,3,4 = memory types)...
-
-		Sample memory map (w/overlaps):
-		   ____22__________________
-		   ______________________4_
-		   ____1111________________
-		   _44_____________________
-		   11111111________________
-		   ____________________33__
-		   ___________44___________
-		   __________33333_________
-		   ______________22________
-		   ___________________2222_
-		   _________111111111______
-		   _____________________11_
-		   _________________4______
-
-		Sanitized equivalent (no overlap):
-		   1_______________________
-		   _44_____________________
-		   ___1____________________
-		   ____22__________________
-		   ______11________________
-		   _________1______________
-		   __________3_____________
-		   ___________44___________
-		   _____________33_________
-		   _______________2________
-		   ________________1_______
-		   _________________4______
-		   ___________________2____
-		   ____________________33__
-		   ______________________4_
-	*/
-
-	/* if there's only one memory region, don't bother */
-	if (*pnr_map < 2)
-		return -1;
-
-	old_nr = *pnr_map;
-
-	/* bail out if we find any unreasonable addresses in bios map */
-	for (i=0; i<old_nr; i++)
-		if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
-			return -1;
-
-	/* create pointers for initial change-point information (for sorting) */
-	for (i=0; i < 2*old_nr; i++)
-		change_point[i] = &change_point_list[i];
-
-	/* record all known change-points (starting and ending addresses),
-	   omitting those that are for empty memory regions */
-	chgidx = 0;
-	for (i=0; i < old_nr; i++)	{
-		if (biosmap[i].size != 0) {
-			change_point[chgidx]->addr = biosmap[i].addr;
-			change_point[chgidx++]->pbios = &biosmap[i];
-			change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size;
-			change_point[chgidx++]->pbios = &biosmap[i];
-		}
-	}
-	chg_nr = chgidx;    	/* true number of change-points */
-
-	/* sort change-point list by memory addresses (low -> high) */
-	still_changing = 1;
-	while (still_changing)	{
-		still_changing = 0;
-		for (i=1; i < chg_nr; i++)  {
-			/* if <current_addr> > <last_addr>, swap */
-			/* or, if current=<start_addr> & last=<end_addr>, swap */
-			if ((change_point[i]->addr < change_point[i-1]->addr) ||
-				((change_point[i]->addr == change_point[i-1]->addr) &&
-				 (change_point[i]->addr == change_point[i]->pbios->addr) &&
-				 (change_point[i-1]->addr != change_point[i-1]->pbios->addr))
-			   )
-			{
-				change_tmp = change_point[i];
-				change_point[i] = change_point[i-1];
-				change_point[i-1] = change_tmp;
-				still_changing=1;
-			}
-		}
-	}
-
-	/* create a new bios memory map, removing overlaps */
-	overlap_entries=0;	 /* number of entries in the overlap table */
-	new_bios_entry=0;	 /* index for creating new bios map entries */
-	last_type = 0;		 /* start with undefined memory type */
-	last_addr = 0;		 /* start with 0 as last starting address */
-	/* loop through change-points, determining affect on the new bios map */
-	for (chgidx=0; chgidx < chg_nr; chgidx++)
-	{
-		/* keep track of all overlapping bios entries */
-		if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr)
-		{
-			/* add map entry to overlap list (> 1 entry implies an overlap) */
-			overlap_list[overlap_entries++]=change_point[chgidx]->pbios;
-		}
-		else
-		{
-			/* remove entry from list (order independent, so swap with last) */
-			for (i=0; i<overlap_entries; i++)
-			{
-				if (overlap_list[i] == change_point[chgidx]->pbios)
-					overlap_list[i] = overlap_list[overlap_entries-1];
-			}
-			overlap_entries--;
-		}
-		/* if there are overlapping entries, decide which "type" to use */
-		/* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
-		current_type = 0;
-		for (i=0; i<overlap_entries; i++)
-			if (overlap_list[i]->type > current_type)
-				current_type = overlap_list[i]->type;
-		/* continue building up new bios map based on this information */
-		if (current_type != last_type)	{
-			if (last_type != 0)	 {
-				new_bios[new_bios_entry].size =
-					change_point[chgidx]->addr - last_addr;
-				/* move forward only if the new size was non-zero */
-				if (new_bios[new_bios_entry].size != 0)
-					if (++new_bios_entry >= E820MAX)
-						break; 	/* no more space left for new bios entries */
-			}
-			if (current_type != 0)	{
-				new_bios[new_bios_entry].addr = change_point[chgidx]->addr;
-				new_bios[new_bios_entry].type = current_type;
-				last_addr=change_point[chgidx]->addr;
-			}
-			last_type = current_type;
-		}
-	}
-	new_nr = new_bios_entry;   /* retain count for new bios entries */
-
-	/* copy new bios mapping into original location */
-	memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry));
-	*pnr_map = new_nr;
-
-	return 0;
-}
-
-/*
- * Copy the BIOS e820 map into a safe place.
- *
- * Sanity-check it while we're at it..
- *
- * If we're lucky and live on a modern system, the setup code
- * will have given us a memory map that we can use to properly
- * set up memory.  If we aren't, we'll fake a memory map.
- *
- * We check to see that the memory map contains at least 2 elements
- * before we'll use it, because the detection code in setup.S may
- * not be perfect and most every PC known to man has two memory
- * regions: one from 0 to 640k, and one from 1mb up.  (The IBM
- * thinkpad 560x, for example, does not cooperate with the memory
- * detection code.)
- */
-int __init copy_e820_map(struct e820entry * biosmap, int nr_map)
-{
-	/* Only one memory region (or negative)? Ignore it */
-	if (nr_map < 2)
-		return -1;
-
-	do {
-		unsigned long long start = biosmap->addr;
-		unsigned long long size = biosmap->size;
-		unsigned long long end = start + size;
-		unsigned long type = biosmap->type;
-
-		/* Overflow in 64 bits? Ignore the memory map. */
-		if (start > end)
-			return -1;
-
-		/*
-		 * Some BIOSes claim RAM in the 640k - 1M region.
-		 * Not right. Fix it up.
-		 */
-		if (type == E820_RAM) {
-			if (start < 0x100000ULL && end > 0xA0000ULL) {
-				if (start < 0xA0000ULL)
-					add_memory_region(start, 0xA0000ULL-start, type);
-				if (end <= 0x100000ULL)
-					continue;
-				start = 0x100000ULL;
-				size = end - start;
-			}
-		}
-		add_memory_region(start, size, type);
-	} while (biosmap++,--nr_map);
-	return 0;
-}
-
 #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
 struct edd edd;
 #ifdef CONFIG_EDD_MODULE
@@ -682,7 +159,7 @@ static inline void copy_edd(void)
 }
 #endif
 
-static int __initdata user_defined_memmap = 0;
+int __initdata user_defined_memmap = 0;
 
 /*
  * "mem=nopentium" disables the 4MB page tables.
@@ -719,51 +196,6 @@ static int __init parse_mem(char *arg)
 }
 early_param("mem", parse_mem);
 
-static int __init parse_memmap(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	if (strcmp(arg, "exactmap") == 0) {
-#ifdef CONFIG_CRASH_DUMP
-		/* If we are doing a crash dump, we
-		 * still need to know the real mem
-		 * size before original memory map is
-		 * reset.
-		 */
-		find_max_pfn();
-		saved_max_pfn = max_pfn;
-#endif
-		e820.nr_map = 0;
-		user_defined_memmap = 1;
-	} else {
-		/* If the user specifies memory size, we
-		 * limit the BIOS-provided memory map to
-		 * that size. exactmap can be used to specify
-		 * the exact map. mem=number can be used to
-		 * trim the existing memory map.
-		 */
-		unsigned long long start_at, mem_size;
-
-		mem_size = memparse(arg, &arg);
-		if (*arg == '@') {
-			start_at = memparse(arg+1, &arg);
-			add_memory_region(start_at, mem_size, E820_RAM);
-		} else if (*arg == '#') {
-			start_at = memparse(arg+1, &arg);
-			add_memory_region(start_at, mem_size, E820_ACPI);
-		} else if (*arg == '$') {
-			start_at = memparse(arg+1, &arg);
-			add_memory_region(start_at, mem_size, E820_RESERVED);
-		} else {
-			limit_regions(mem_size);
-			user_defined_memmap = 1;
-		}
-	}
-	return 0;
-}
-early_param("memmap", parse_memmap);
-
 #ifdef CONFIG_PROC_VMCORE
 /* elfcorehdr= specifies the location of elf core header
  * stored by the crashed kernel.
@@ -828,90 +260,6 @@ static int __init parse_reservetop(char *arg)
 early_param("reservetop", parse_reservetop);
 
 /*
- * Callback for efi_memory_walk.
- */
-static int __init
-efi_find_max_pfn(unsigned long start, unsigned long end, void *arg)
-{
-	unsigned long *max_pfn = arg, pfn;
-
-	if (start < end) {
-		pfn = PFN_UP(end -1);
-		if (pfn > *max_pfn)
-			*max_pfn = pfn;
-	}
-	return 0;
-}
-
-static int __init
-efi_memory_present_wrapper(unsigned long start, unsigned long end, void *arg)
-{
-	memory_present(0, PFN_UP(start), PFN_DOWN(end));
-	return 0;
-}
-
- /*
-  * This function checks if the entire range <start,end> is mapped with type.
-  *
-  * Note: this function only works correct if the e820 table is sorted and
-  * not-overlapping, which is the case
-  */
-int __init
-e820_all_mapped(unsigned long s, unsigned long e, unsigned type)
-{
-	u64 start = s;
-	u64 end = e;
-	int i;
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-		if (type && ei->type != type)
-			continue;
-		/* is the region (part) in overlap with the current region ?*/
-		if (ei->addr >= end || ei->addr + ei->size <= start)
-			continue;
-		/* if the region is at the beginning of <start,end> we move
-		 * start to the end of the region since it's ok until there
-		 */
-		if (ei->addr <= start)
-			start = ei->addr + ei->size;
-		/* if start is now at or beyond end, we're done, full
-		 * coverage */
-		if (start >= end)
-			return 1; /* we're done */
-	}
-	return 0;
-}
-
-/*
- * Find the highest page frame number we have available
- */
-void __init find_max_pfn(void)
-{
-	int i;
-
-	max_pfn = 0;
-	if (efi_enabled) {
-		efi_memmap_walk(efi_find_max_pfn, &max_pfn);
-		efi_memmap_walk(efi_memory_present_wrapper, NULL);
-		return;
-	}
-
-	for (i = 0; i < e820.nr_map; i++) {
-		unsigned long start, end;
-		/* RAM? */
-		if (e820.map[i].type != E820_RAM)
-			continue;
-		start = PFN_UP(e820.map[i].addr);
-		end = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
-		if (start >= end)
-			continue;
-		if (end > max_pfn)
-			max_pfn = end;
-		memory_present(0, start, end);
-	}
-}
-
-/*
  * Determine low and high memory ranges:
  */
 unsigned long __init find_max_low_pfn(void)
@@ -971,68 +319,6 @@ unsigned long __init find_max_low_pfn(void)
 }
 
 /*
- * Free all available memory for boot time allocation.  Used
- * as a callback function by efi_memory_walk()
- */
-
-static int __init
-free_available_memory(unsigned long start, unsigned long end, void *arg)
-{
-	/* check max_low_pfn */
-	if (start >= (max_low_pfn << PAGE_SHIFT))
-		return 0;
-	if (end >= (max_low_pfn << PAGE_SHIFT))
-		end = max_low_pfn << PAGE_SHIFT;
-	if (start < end)
-		free_bootmem(start, end - start);
-
-	return 0;
-}
-/*
- * Register fully available low RAM pages with the bootmem allocator.
- */
-static void __init register_bootmem_low_pages(unsigned long max_low_pfn)
-{
-	int i;
-
-	if (efi_enabled) {
-		efi_memmap_walk(free_available_memory, NULL);
-		return;
-	}
-	for (i = 0; i < e820.nr_map; i++) {
-		unsigned long curr_pfn, last_pfn, size;
-		/*
-		 * Reserve usable low memory
-		 */
-		if (e820.map[i].type != E820_RAM)
-			continue;
-		/*
-		 * We are rounding up the start address of usable memory:
-		 */
-		curr_pfn = PFN_UP(e820.map[i].addr);
-		if (curr_pfn >= max_low_pfn)
-			continue;
-		/*
-		 * ... and at the end of the usable range downwards:
-		 */
-		last_pfn = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
-
-		if (last_pfn > max_low_pfn)
-			last_pfn = max_low_pfn;
-
-		/*
-		 * .. finally, did all the rounding and playing
-		 * around just make the area go away?
-		 */
-		if (last_pfn <= curr_pfn)
-			continue;
-
-		size = last_pfn - curr_pfn;
-		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
-	}
-}
-
-/*
  * workaround for Dell systems that neglect to reserve EBDA
  */
 static void __init reserve_ebda_region(void)
@@ -1118,8 +404,8 @@ void __init setup_bootmem_allocator(void)
 	 * the (very unlikely) case of us accidentally initializing the
 	 * bootmem allocator with an invalid RAM area.
 	 */
-	reserve_bootmem(__PHYSICAL_START, (PFN_PHYS(min_low_pfn) +
-			 bootmap_size + PAGE_SIZE-1) - (__PHYSICAL_START));
+	reserve_bootmem(__pa_symbol(_text), (PFN_PHYS(min_low_pfn) +
+			 bootmap_size + PAGE_SIZE-1) - __pa_symbol(_text));
 
 	/*
 	 * reserve physical page 0 - it's a special BIOS page on many boxes,
@@ -1199,126 +485,6 @@ void __init remapped_pgdat_init(void)
 	}
 }
 
-/*
- * Request address space for all standard RAM and ROM resources
- * and also for regions reported as reserved by the e820.
- */
-static void __init
-legacy_init_iomem_resources(struct resource *code_resource, struct resource *data_resource)
-{
-	int i;
-
-	probe_roms();
-	for (i = 0; i < e820.nr_map; i++) {
-		struct resource *res;
-#ifndef CONFIG_RESOURCES_64BIT
-		if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL)
-			continue;
-#endif
-		res = kzalloc(sizeof(struct resource), GFP_ATOMIC);
-		switch (e820.map[i].type) {
-		case E820_RAM:	res->name = "System RAM"; break;
-		case E820_ACPI:	res->name = "ACPI Tables"; break;
-		case E820_NVS:	res->name = "ACPI Non-volatile Storage"; break;
-		default:	res->name = "reserved";
-		}
-		res->start = e820.map[i].addr;
-		res->end = res->start + e820.map[i].size - 1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-		if (request_resource(&iomem_resource, res)) {
-			kfree(res);
-			continue;
-		}
-		if (e820.map[i].type == E820_RAM) {
-			/*
-			 *  We don't know which RAM region contains kernel data,
-			 *  so we try it repeatedly and let the resource manager
-			 *  test it.
-			 */
-			request_resource(res, code_resource);
-			request_resource(res, data_resource);
-#ifdef CONFIG_KEXEC
-			request_resource(res, &crashk_res);
-#endif
-		}
-	}
-}
-
-/*
- * Request address space for all standard resources
- *
- * This is called just before pcibios_init(), which is also a
- * subsys_initcall, but is linked in later (in arch/i386/pci/common.c).
- */
-static int __init request_standard_resources(void)
-{
-	int i;
-
-	printk("Setting up standard PCI resources\n");
-	if (efi_enabled)
-		efi_initialize_iomem_resources(&code_resource, &data_resource);
-	else
-		legacy_init_iomem_resources(&code_resource, &data_resource);
-
-	/* EFI systems may still have VGA */
-	request_resource(&iomem_resource, &video_ram_resource);
-
-	/* request I/O space for devices used on all i[345]86 PCs */
-	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
-		request_resource(&ioport_resource, &standard_io_resources[i]);
-	return 0;
-}
-
-subsys_initcall(request_standard_resources);
-
-static void __init register_memory(void)
-{
-	unsigned long gapstart, gapsize, round;
-	unsigned long long last;
-	int i;
-
-	/*
-	 * Search for the bigest gap in the low 32 bits of the e820
-	 * memory space.
-	 */
-	last = 0x100000000ull;
-	gapstart = 0x10000000;
-	gapsize = 0x400000;
-	i = e820.nr_map;
-	while (--i >= 0) {
-		unsigned long long start = e820.map[i].addr;
-		unsigned long long end = start + e820.map[i].size;
-
-		/*
-		 * Since "last" is at most 4GB, we know we'll
-		 * fit in 32 bits if this condition is true
-		 */
-		if (last > end) {
-			unsigned long gap = last - end;
-
-			if (gap > gapsize) {
-				gapsize = gap;
-				gapstart = end;
-			}
-		}
-		if (start < last)
-			last = start;
-	}
-
-	/*
-	 * See how much we want to round up: start off with
-	 * rounding to the next 1MB area.
-	 */
-	round = 0x100000;
-	while ((gapsize >> 4) > round)
-		round += round;
-	/* Fun with two's complement */
-	pci_mem_start = (gapstart + round) & -round;
-
-	printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n",
-		pci_mem_start, gapstart, gapsize);
-}
-
 #ifdef CONFIG_MCA
 static void set_mca_bus(int x)
 {
@@ -1328,6 +494,12 @@ static void set_mca_bus(int x)
 static void set_mca_bus(int x) { }
 #endif
 
+/* Overridden in paravirt.c if CONFIG_PARAVIRT */
+char * __attribute__((weak)) memory_setup(void)
+{
+	return machine_specific_memory_setup();
+}
+
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
@@ -1380,7 +552,7 @@ void __init setup_arch(char **cmdline_p)
 		efi_init();
 	else {
 		printk(KERN_INFO "BIOS-provided physical RAM map:\n");
-		print_memory_map(machine_specific_memory_setup());
+		print_memory_map(memory_setup());
 	}
 
 	copy_edd();