Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 612 insertions, 0 deletions

diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c
new file mode 100644
index 00000000000..6223c33ac91
--- /dev/null
+++ b/arch/i386/kernel/smp.c
@@ -0,0 +1,612 @@
+/*
+ *	Intel SMP support routines.
+ *
+ *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ *	(c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
+ *
+ *	This code is released under the GNU General Public License version 2 or
+ *	later.
+ */
+
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/cache.h>
+#include <linux/interrupt.h>
+
+#include <asm/mtrr.h>
+#include <asm/tlbflush.h>
+#include <mach_apic.h>
+
+/*
+ *	Some notes on x86 processor bugs affecting SMP operation:
+ *
+ *	Pentium, Pentium Pro, II, III (and all CPUs) have bugs.
+ *	The Linux implications for SMP are handled as follows:
+ *
+ *	Pentium III / [Xeon]
+ *		None of the E1AP-E3AP errata are visible to the user.
+ *
+ *	E1AP.	see PII A1AP
+ *	E2AP.	see PII A2AP
+ *	E3AP.	see PII A3AP
+ *
+ *	Pentium II / [Xeon]
+ *		None of the A1AP-A3AP errata are visible to the user.
+ *
+ *	A1AP.	see PPro 1AP
+ *	A2AP.	see PPro 2AP
+ *	A3AP.	see PPro 7AP
+ *
+ *	Pentium Pro
+ *		None of 1AP-9AP errata are visible to the normal user,
+ *	except occasional delivery of 'spurious interrupt' as trap #15.
+ *	This is very rare and a non-problem.
+ *
+ *	1AP.	Linux maps APIC as non-cacheable
+ *	2AP.	worked around in hardware
+ *	3AP.	fixed in C0 and above steppings microcode update.
+ *		Linux does not use excessive STARTUP_IPIs.
+ *	4AP.	worked around in hardware
+ *	5AP.	symmetric IO mode (normal Linux operation) not affected.
+ *		'noapic' mode has vector 0xf filled out properly.
+ *	6AP.	'noapic' mode might be affected - fixed in later steppings
+ *	7AP.	We do not assume writes to the LVT deassering IRQs
+ *	8AP.	We do not enable low power mode (deep sleep) during MP bootup
+ *	9AP.	We do not use mixed mode
+ *
+ *	Pentium
+ *		There is a marginal case where REP MOVS on 100MHz SMP
+ *	machines with B stepping processors can fail. XXX should provide
+ *	an L1cache=Writethrough or L1cache=off option.
+ *
+ *		B stepping CPUs may hang. There are hardware work arounds
+ *	for this. We warn about it in case your board doesn't have the work
+ *	arounds. Basically thats so I can tell anyone with a B stepping
+ *	CPU and SMP problems "tough".
+ *
+ *	Specific items [From Pentium Processor Specification Update]
+ *
+ *	1AP.	Linux doesn't use remote read
+ *	2AP.	Linux doesn't trust APIC errors
+ *	3AP.	We work around this
+ *	4AP.	Linux never generated 3 interrupts of the same priority
+ *		to cause a lost local interrupt.
+ *	5AP.	Remote read is never used
+ *	6AP.	not affected - worked around in hardware
+ *	7AP.	not affected - worked around in hardware
+ *	8AP.	worked around in hardware - we get explicit CS errors if not
+ *	9AP.	only 'noapic' mode affected. Might generate spurious
+ *		interrupts, we log only the first one and count the
+ *		rest silently.
+ *	10AP.	not affected - worked around in hardware
+ *	11AP.	Linux reads the APIC between writes to avoid this, as per
+ *		the documentation. Make sure you preserve this as it affects
+ *		the C stepping chips too.
+ *	12AP.	not affected - worked around in hardware
+ *	13AP.	not affected - worked around in hardware
+ *	14AP.	we always deassert INIT during bootup
+ *	15AP.	not affected - worked around in hardware
+ *	16AP.	not affected - worked around in hardware
+ *	17AP.	not affected - worked around in hardware
+ *	18AP.	not affected - worked around in hardware
+ *	19AP.	not affected - worked around in BIOS
+ *
+ *	If this sounds worrying believe me these bugs are either ___RARE___,
+ *	or are signal timing bugs worked around in hardware and there's
+ *	about nothing of note with C stepping upwards.
+ */
+
+DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) ____cacheline_aligned = { &init_mm, 0, };
+
+/*
+ * the following functions deal with sending IPIs between CPUs.
+ *
+ * We use 'broadcast', CPU->CPU IPIs and self-IPIs too.
+ */
+
+static inline int __prepare_ICR (unsigned int shortcut, int vector)
+{
+	return APIC_DM_FIXED | shortcut | vector | APIC_DEST_LOGICAL;
+}
+
+static inline int __prepare_ICR2 (unsigned int mask)
+{
+	return SET_APIC_DEST_FIELD(mask);
+}
+
+void __send_IPI_shortcut(unsigned int shortcut, int vector)
+{
+	/*
+	 * Subtle. In the case of the 'never do double writes' workaround
+	 * we have to lock out interrupts to be safe.  As we don't care
+	 * of the value read we use an atomic rmw access to avoid costly
+	 * cli/sti.  Otherwise we use an even cheaper single atomic write
+	 * to the APIC.
+	 */
+	unsigned int cfg;
+
+	/*
+	 * Wait for idle.
+	 */
+	apic_wait_icr_idle();
+
+	/*
+	 * No need to touch the target chip field
+	 */
+	cfg = __prepare_ICR(shortcut, vector);
+
+	/*
+	 * Send the IPI. The write to APIC_ICR fires this off.
+	 */
+	apic_write_around(APIC_ICR, cfg);
+}
+
+void fastcall send_IPI_self(int vector)
+{
+	__send_IPI_shortcut(APIC_DEST_SELF, vector);
+}
+
+/*
+ * This is only used on smaller machines.
+ */
+void send_IPI_mask_bitmask(cpumask_t cpumask, int vector)
+{
+	unsigned long mask = cpus_addr(cpumask)[0];
+	unsigned long cfg;
+	unsigned long flags;
+
+	local_irq_save(flags);
+		
+	/*
+	 * Wait for idle.
+	 */
+	apic_wait_icr_idle();
+		
+	/*
+	 * prepare target chip field
+	 */
+	cfg = __prepare_ICR2(mask);
+	apic_write_around(APIC_ICR2, cfg);
+		
+	/*
+	 * program the ICR 
+	 */
+	cfg = __prepare_ICR(0, vector);
+			
+	/*
+	 * Send the IPI. The write to APIC_ICR fires this off.
+	 */
+	apic_write_around(APIC_ICR, cfg);
+
+	local_irq_restore(flags);
+}
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector)
+{
+	unsigned long cfg, flags;
+	unsigned int query_cpu;
+
+	/*
+	 * Hack. The clustered APIC addressing mode doesn't allow us to send 
+	 * to an arbitrary mask, so I do a unicasts to each CPU instead. This 
+	 * should be modified to do 1 message per cluster ID - mbligh
+	 */ 
+
+	local_irq_save(flags);
+
+	for (query_cpu = 0; query_cpu < NR_CPUS; ++query_cpu) {
+		if (cpu_isset(query_cpu, mask)) {
+		
+			/*
+			 * Wait for idle.
+			 */
+			apic_wait_icr_idle();
+		
+			/*
+			 * prepare target chip field
+			 */
+			cfg = __prepare_ICR2(cpu_to_logical_apicid(query_cpu));
+			apic_write_around(APIC_ICR2, cfg);
+		
+			/*
+			 * program the ICR 
+			 */
+			cfg = __prepare_ICR(0, vector);
+			
+			/*
+			 * Send the IPI. The write to APIC_ICR fires this off.
+			 */
+			apic_write_around(APIC_ICR, cfg);
+		}
+	}
+	local_irq_restore(flags);
+}
+
+#include <mach_ipi.h> /* must come after the send_IPI functions above for inlining */
+
+/*
+ *	Smarter SMP flushing macros. 
+ *		c/o Linus Torvalds.
+ *
+ *	These mean you can really definitely utterly forget about
+ *	writing to user space from interrupts. (Its not allowed anyway).
+ *
+ *	Optimizations Manfred Spraul <manfred@colorfullife.com>
+ */
+
+static cpumask_t flush_cpumask;
+static struct mm_struct * flush_mm;
+static unsigned long flush_va;
+static DEFINE_SPINLOCK(tlbstate_lock);
+#define FLUSH_ALL	0xffffffff
+
+/*
+ * We cannot call mmdrop() because we are in interrupt context, 
+ * instead update mm->cpu_vm_mask.
+ *
+ * We need to reload %cr3 since the page tables may be going
+ * away from under us..
+ */
+static inline void leave_mm (unsigned long cpu)
+{
+	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
+		BUG();
+	cpu_clear(cpu, per_cpu(cpu_tlbstate, cpu).active_mm->cpu_vm_mask);
+	load_cr3(swapper_pg_dir);
+}
+
+/*
+ *
+ * The flush IPI assumes that a thread switch happens in this order:
+ * [cpu0: the cpu that switches]
+ * 1) switch_mm() either 1a) or 1b)
+ * 1a) thread switch to a different mm
+ * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
+ * 	Stop ipi delivery for the old mm. This is not synchronized with
+ * 	the other cpus, but smp_invalidate_interrupt ignore flush ipis
+ * 	for the wrong mm, and in the worst case we perform a superflous
+ * 	tlb flush.
+ * 1a2) set cpu_tlbstate to TLBSTATE_OK
+ * 	Now the smp_invalidate_interrupt won't call leave_mm if cpu0
+ *	was in lazy tlb mode.
+ * 1a3) update cpu_tlbstate[].active_mm
+ * 	Now cpu0 accepts tlb flushes for the new mm.
+ * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask);
+ * 	Now the other cpus will send tlb flush ipis.
+ * 1a4) change cr3.
+ * 1b) thread switch without mm change
+ *	cpu_tlbstate[].active_mm is correct, cpu0 already handles
+ *	flush ipis.
+ * 1b1) set cpu_tlbstate to TLBSTATE_OK
+ * 1b2) test_and_set the cpu bit in cpu_vm_mask.
+ * 	Atomically set the bit [other cpus will start sending flush ipis],
+ * 	and test the bit.
+ * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
+ * 2) switch %%esp, ie current
+ *
+ * The interrupt must handle 2 special cases:
+ * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
+ * - the cpu performs speculative tlb reads, i.e. even if the cpu only
+ *   runs in kernel space, the cpu could load tlb entries for user space
+ *   pages.
+ *
+ * The good news is that cpu_tlbstate is local to each cpu, no
+ * write/read ordering problems.
+ */
+
+/*
+ * TLB flush IPI:
+ *
+ * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
+ * 2) Leave the mm if we are in the lazy tlb mode.
+ */
+
+fastcall void smp_invalidate_interrupt(struct pt_regs *regs)
+{
+	unsigned long cpu;
+
+	cpu = get_cpu();
+
+	if (!cpu_isset(cpu, flush_cpumask))
+		goto out;
+		/* 
+		 * This was a BUG() but until someone can quote me the
+		 * line from the intel manual that guarantees an IPI to
+		 * multiple CPUs is retried _only_ on the erroring CPUs
+		 * its staying as a return
+		 *
+		 * BUG();
+		 */
+		 
+	if (flush_mm == per_cpu(cpu_tlbstate, cpu).active_mm) {
+		if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) {
+			if (flush_va == FLUSH_ALL)
+				local_flush_tlb();
+			else
+				__flush_tlb_one(flush_va);
+		} else
+			leave_mm(cpu);
+	}
+	ack_APIC_irq();
+	smp_mb__before_clear_bit();
+	cpu_clear(cpu, flush_cpumask);
+	smp_mb__after_clear_bit();
+out:
+	put_cpu_no_resched();
+}
+
+static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
+						unsigned long va)
+{
+	cpumask_t tmp;
+	/*
+	 * A couple of (to be removed) sanity checks:
+	 *
+	 * - we do not send IPIs to not-yet booted CPUs.
+	 * - current CPU must not be in mask
+	 * - mask must exist :)
+	 */
+	BUG_ON(cpus_empty(cpumask));
+
+	cpus_and(tmp, cpumask, cpu_online_map);
+	BUG_ON(!cpus_equal(cpumask, tmp));
+	BUG_ON(cpu_isset(smp_processor_id(), cpumask));
+	BUG_ON(!mm);
+
+	/*
+	 * i'm not happy about this global shared spinlock in the
+	 * MM hot path, but we'll see how contended it is.
+	 * Temporarily this turns IRQs off, so that lockups are
+	 * detected by the NMI watchdog.
+	 */
+	spin_lock(&tlbstate_lock);
+	
+	flush_mm = mm;
+	flush_va = va;
+#if NR_CPUS <= BITS_PER_LONG
+	atomic_set_mask(cpumask, &flush_cpumask);
+#else
+	{
+		int k;
+		unsigned long *flush_mask = (unsigned long *)&flush_cpumask;
+		unsigned long *cpu_mask = (unsigned long *)&cpumask;
+		for (k = 0; k < BITS_TO_LONGS(NR_CPUS); ++k)
+			atomic_set_mask(cpu_mask[k], &flush_mask[k]);
+	}
+#endif
+	/*
+	 * We have to send the IPI only to
+	 * CPUs affected.
+	 */
+	send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR);
+
+	while (!cpus_empty(flush_cpumask))
+		/* nothing. lockup detection does not belong here */
+		mb();
+
+	flush_mm = NULL;
+	flush_va = 0;
+	spin_unlock(&tlbstate_lock);
+}
+	
+void flush_tlb_current_task(void)
+{
+	struct mm_struct *mm = current->mm;
+	cpumask_t cpu_mask;
+
+	preempt_disable();
+	cpu_mask = mm->cpu_vm_mask;
+	cpu_clear(smp_processor_id(), cpu_mask);
+
+	local_flush_tlb();
+	if (!cpus_empty(cpu_mask))
+		flush_tlb_others(cpu_mask, mm, FLUSH_ALL);
+	preempt_enable();
+}
+
+void flush_tlb_mm (struct mm_struct * mm)
+{
+	cpumask_t cpu_mask;
+
+	preempt_disable();
+	cpu_mask = mm->cpu_vm_mask;
+	cpu_clear(smp_processor_id(), cpu_mask);
+
+	if (current->active_mm == mm) {
+		if (current->mm)
+			local_flush_tlb();
+		else
+			leave_mm(smp_processor_id());
+	}
+	if (!cpus_empty(cpu_mask))
+		flush_tlb_others(cpu_mask, mm, FLUSH_ALL);
+
+	preempt_enable();
+}
+
+void flush_tlb_page(struct vm_area_struct * vma, unsigned long va)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	cpumask_t cpu_mask;
+
+	preempt_disable();
+	cpu_mask = mm->cpu_vm_mask;
+	cpu_clear(smp_processor_id(), cpu_mask);
+
+	if (current->active_mm == mm) {
+		if(current->mm)
+			__flush_tlb_one(va);
+		 else
+		 	leave_mm(smp_processor_id());
+	}
+
+	if (!cpus_empty(cpu_mask))
+		flush_tlb_others(cpu_mask, mm, va);
+
+	preempt_enable();
+}
+
+static void do_flush_tlb_all(void* info)
+{
+	unsigned long cpu = smp_processor_id();
+
+	__flush_tlb_all();
+	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_LAZY)
+		leave_mm(cpu);
+}
+
+void flush_tlb_all(void)
+{
+	on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
+}
+
+/*
+ * this function sends a 'reschedule' IPI to another CPU.
+ * it goes straight through and wastes no time serializing
+ * anything. Worst case is that we lose a reschedule ...
+ */
+void smp_send_reschedule(int cpu)
+{
+	send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
+}
+
+/*
+ * Structure and data for smp_call_function(). This is designed to minimise
+ * static memory requirements. It also looks cleaner.
+ */
+static DEFINE_SPINLOCK(call_lock);
+
+struct call_data_struct {
+	void (*func) (void *info);
+	void *info;
+	atomic_t started;
+	atomic_t finished;
+	int wait;
+};
+
+static struct call_data_struct * call_data;
+
+/*
+ * this function sends a 'generic call function' IPI to all other CPUs
+ * in the system.
+ */
+
+int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
+			int wait)
+/*
+ * [SUMMARY] Run a function on all other CPUs.
+ * <func> The function to run. This must be fast and non-blocking.
+ * <info> An arbitrary pointer to pass to the function.
+ * <nonatomic> currently unused.
+ * <wait> If true, wait (atomically) until function has completed on other CPUs.
+ * [RETURNS] 0 on success, else a negative status code. Does not return until
+ * remote CPUs are nearly ready to execute <<func>> or are or have executed.
+ *
+ * You must not call this function with disabled interrupts or from a
+ * hardware interrupt handler or from a bottom half handler.
+ */
+{
+	struct call_data_struct data;
+	int cpus = num_online_cpus()-1;
+
+	if (!cpus)
+		return 0;
+
+	/* Can deadlock when called with interrupts disabled */
+	WARN_ON(irqs_disabled());
+
+	data.func = func;
+	data.info = info;
+	atomic_set(&data.started, 0);
+	data.wait = wait;
+	if (wait)
+		atomic_set(&data.finished, 0);
+
+	spin_lock(&call_lock);
+	call_data = &data;
+	mb();
+	
+	/* Send a message to all other CPUs and wait for them to respond */
+	send_IPI_allbutself(CALL_FUNCTION_VECTOR);
+
+	/* Wait for response */
+	while (atomic_read(&data.started) != cpus)
+		cpu_relax();
+
+	if (wait)
+		while (atomic_read(&data.finished) != cpus)
+			cpu_relax();
+	spin_unlock(&call_lock);
+
+	return 0;
+}
+
+static void stop_this_cpu (void * dummy)
+{
+	/*
+	 * Remove this CPU:
+	 */
+	cpu_clear(smp_processor_id(), cpu_online_map);
+	local_irq_disable();
+	disable_local_APIC();
+	if (cpu_data[smp_processor_id()].hlt_works_ok)
+		for(;;) __asm__("hlt");
+	for (;;);
+}
+
+/*
+ * this function calls the 'stop' function on all other CPUs in the system.
+ */
+
+void smp_send_stop(void)
+{
+	smp_call_function(stop_this_cpu, NULL, 1, 0);
+
+	local_irq_disable();
+	disable_local_APIC();
+	local_irq_enable();
+}
+
+/*
+ * Reschedule call back. Nothing to do,
+ * all the work is done automatically when
+ * we return from the interrupt.
+ */
+fastcall void smp_reschedule_interrupt(struct pt_regs *regs)
+{
+	ack_APIC_irq();
+}
+
+fastcall void smp_call_function_interrupt(struct pt_regs *regs)
+{
+	void (*func) (void *info) = call_data->func;
+	void *info = call_data->info;
+	int wait = call_data->wait;
+
+	ack_APIC_irq();
+	/*
+	 * Notify initiating CPU that I've grabbed the data and am
+	 * about to execute the function
+	 */
+	mb();
+	atomic_inc(&call_data->started);
+	/*
+	 * At this point the info structure may be out of scope unless wait==1
+	 */
+	irq_enter();
+	(*func)(info);
+	irq_exit();
+
+	if (wait) {
+		mb();
+		atomic_inc(&call_data->finished);
+	}
+}
+