i386: move mach-visws

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 0 insertions, 183 deletions

diff --git a/arch/i386/mach-visws/setup.c b/arch/i386/mach-visws/setup.c
deleted file mode 100644
index 1f81f10e03a..00000000000
--- a/arch/i386/mach-visws/setup.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- *  Unmaintained SGI Visual Workstation support.
- *  Split out from setup.c by davej@suse.de
- */
-
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
-#include <asm/fixmap.h>
-#include <asm/arch_hooks.h>
-#include <asm/io.h>
-#include <asm/e820.h>
-#include <asm/setup.h>
-#include "cobalt.h"
-#include "piix4.h"
-
-int no_broadcast;
-
-char visws_board_type = -1;
-char visws_board_rev = -1;
-
-void __init visws_get_board_type_and_rev(void)
-{
-	int raw;
-
-	visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
-							 >> PIIX_GPI_BD_SHIFT;
-	/*
-	 * Get Board rev.
-	 * First, we have to initialize the 307 part to allow us access
-	 * to the GPIO registers.  Let's map them at 0x0fc0 which is right
-	 * after the PIIX4 PM section.
-	 */
-	outb_p(SIO_DEV_SEL, SIO_INDEX);
-	outb_p(SIO_GP_DEV, SIO_DATA);	/* Talk to GPIO regs. */
-
-	outb_p(SIO_DEV_MSB, SIO_INDEX);
-	outb_p(SIO_GP_MSB, SIO_DATA);	/* MSB of GPIO base address */
-
-	outb_p(SIO_DEV_LSB, SIO_INDEX);
-	outb_p(SIO_GP_LSB, SIO_DATA);	/* LSB of GPIO base address */
-
-	outb_p(SIO_DEV_ENB, SIO_INDEX);
-	outb_p(1, SIO_DATA);		/* Enable GPIO registers. */
-
-	/*
-	 * Now, we have to map the power management section to write
-	 * a bit which enables access to the GPIO registers.
-	 * What lunatic came up with this shit?
-	 */
-	outb_p(SIO_DEV_SEL, SIO_INDEX);
-	outb_p(SIO_PM_DEV, SIO_DATA);	/* Talk to GPIO regs. */
-
-	outb_p(SIO_DEV_MSB, SIO_INDEX);
-	outb_p(SIO_PM_MSB, SIO_DATA);	/* MSB of PM base address */
-
-	outb_p(SIO_DEV_LSB, SIO_INDEX);
-	outb_p(SIO_PM_LSB, SIO_DATA);	/* LSB of PM base address */
-
-	outb_p(SIO_DEV_ENB, SIO_INDEX);
-	outb_p(1, SIO_DATA);		/* Enable PM registers. */
-
-	/*
-	 * Now, write the PM register which enables the GPIO registers.
-	 */
-	outb_p(SIO_PM_FER2, SIO_PM_INDEX);
-	outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
-
-	/*
-	 * Now, initialize the GPIO registers.
-	 * We want them all to be inputs which is the
-	 * power on default, so let's leave them alone.
-	 * So, let's just read the board rev!
-	 */
-	raw = inb_p(SIO_GP_DATA1);
-	raw &= 0x7f;	/* 7 bits of valid board revision ID. */
-
-	if (visws_board_type == VISWS_320) {
-		if (raw < 0x6) {
-			visws_board_rev = 4;
-		} else if (raw < 0xc) {
-			visws_board_rev = 5;
-		} else {
-			visws_board_rev = 6;
-		}
-	} else if (visws_board_type == VISWS_540) {
-			visws_board_rev = 2;
-		} else {
-			visws_board_rev = raw;
-		}
-
-	printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n",
-	       (visws_board_type == VISWS_320 ? "320" :
-	       (visws_board_type == VISWS_540 ? "540" :
-		"unknown")), visws_board_rev);
-}
-
-void __init pre_intr_init_hook(void)
-{
-	init_VISWS_APIC_irqs();
-}
-
-void __init intr_init_hook(void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
-	apic_intr_init();
-#endif
-}
-
-void __init pre_setup_arch_hook()
-{
-	visws_get_board_type_and_rev();
-}
-
-static struct irqaction irq0 = {
-	.handler =	timer_interrupt,
-	.flags =	IRQF_DISABLED | IRQF_IRQPOLL,
-	.name =		"timer",
-};
-
-void __init time_init_hook(void)
-{
-	printk(KERN_INFO "Starting Cobalt Timer system clock\n");
-
-	/* Set the countdown value */
-	co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ);
-
-	/* Start the timer */
-	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN);
-
-	/* Enable (unmask) the timer interrupt */
-	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
-
-	/* Wire cpu IDT entry to s/w handler (and Cobalt APIC to IDT) */
-	setup_irq(0, &irq0);
-}
-
-/* Hook for machine specific memory setup. */
-
-#define MB (1024 * 1024)
-
-unsigned long sgivwfb_mem_phys;
-unsigned long sgivwfb_mem_size;
-EXPORT_SYMBOL(sgivwfb_mem_phys);
-EXPORT_SYMBOL(sgivwfb_mem_size);
-
-long long mem_size __initdata = 0;
-
-char * __init machine_specific_memory_setup(void)
-{
-	long long gfx_mem_size = 8 * MB;
-
-	mem_size = ALT_MEM_K;
-
-	if (!mem_size) {
-		printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n");
-		mem_size = 128 * MB;
-	}
-
-	/*
-	 * this hardcodes the graphics memory to 8 MB
-	 * it really should be sized dynamically (or at least
-	 * set as a boot param)
-	 */
-	if (!sgivwfb_mem_size) {
-		printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n");
-		sgivwfb_mem_size = 8 * MB;
-	}
-
-	/*
-	 * Trim to nearest MB
-	 */
-	sgivwfb_mem_size &= ~((1 << 20) - 1);
-	sgivwfb_mem_phys = mem_size - gfx_mem_size;
-
-	add_memory_region(0, LOWMEMSIZE(), E820_RAM);
-	add_memory_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM);
-	add_memory_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED);
-
-	return "PROM";
-}