diff options
author | Ralf Baechle <ralf@linux-mips.org> | 2008-09-16 19:12:16 +0200 |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2008-10-11 16:18:50 +0100 |
commit | e8c7c482347574ecdd45c43e32c332d5fc2ece61 (patch) | |
tree | c741aa6cdb4e897df9f9476d83a816a7a2b058dd /arch/mips/au1000/common/power.c | |
parent | 8d2d91e86b4153cc2305ec86fe908048f459ff7f (diff) |
MIPS: Alchemy: rename directory
It's more than the au1000 these days.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/au1000/common/power.c')
-rw-r--r-- | arch/mips/au1000/common/power.c | 465 |
1 files changed, 0 insertions, 465 deletions
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c deleted file mode 100644 index bd854a6d1d8..00000000000 --- a/arch/mips/au1000/common/power.c +++ /dev/null @@ -1,465 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xx0 Power Management routines. - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * Some of the routines are right out of init/main.c, whose - * copyrights apply here. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/pm.h> -#include <linux/sysctl.h> -#include <linux/jiffies.h> - -#include <asm/uaccess.h> -#include <asm/cacheflush.h> -#include <asm/mach-au1x00/au1000.h> - -#ifdef CONFIG_PM - -#define DEBUG 1 -#ifdef DEBUG -#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__, ## args) -#else -#define DPRINTK(fmt, args...) -#endif - -static void au1000_calibrate_delay(void); - -extern unsigned long save_local_and_disable(int controller); -extern void restore_local_and_enable(int controller, unsigned long mask); -extern void local_enable_irq(unsigned int irq_nr); - -static DEFINE_SPINLOCK(pm_lock); - -/* - * We need to save/restore a bunch of core registers that are - * either volatile or reset to some state across a processor sleep. - * If reading a register doesn't provide a proper result for a - * later restore, we have to provide a function for loading that - * register and save a copy. - * - * We only have to save/restore registers that aren't otherwise - * done as part of a driver pm_* function. - */ -static unsigned int sleep_aux_pll_cntrl; -static unsigned int sleep_cpu_pll_cntrl; -static unsigned int sleep_pin_function; -static unsigned int sleep_uart0_inten; -static unsigned int sleep_uart0_fifoctl; -static unsigned int sleep_uart0_linectl; -static unsigned int sleep_uart0_clkdiv; -static unsigned int sleep_uart0_enable; -static unsigned int sleep_usbhost_enable; -static unsigned int sleep_usbdev_enable; -static unsigned int sleep_static_memctlr[4][3]; - -/* - * Define this to cause the value you write to /proc/sys/pm/sleep to - * set the TOY timer for the amount of time you want to sleep. - * This is done mainly for testing, but may be useful in other cases. - * The value is number of 32KHz ticks to sleep. - */ -#define SLEEP_TEST_TIMEOUT 1 -#ifdef SLEEP_TEST_TIMEOUT -static int sleep_ticks; -void wakeup_counter0_set(int ticks); -#endif - -static void save_core_regs(void) -{ - extern void save_au1xxx_intctl(void); - extern void pm_eth0_shutdown(void); - - /* - * Do the serial ports.....these really should be a pm_* - * registered function by the driver......but of course the - * standard serial driver doesn't understand our Au1xxx - * unique registers. - */ - sleep_uart0_inten = au_readl(UART0_ADDR + UART_IER); - sleep_uart0_fifoctl = au_readl(UART0_ADDR + UART_FCR); - sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR); - sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK); - sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL); - - /* Shutdown USB host/device. */ - sleep_usbhost_enable = au_readl(USB_HOST_CONFIG); - - /* There appears to be some undocumented reset register.... */ - au_writel(0, 0xb0100004); au_sync(); - au_writel(0, USB_HOST_CONFIG); au_sync(); - - sleep_usbdev_enable = au_readl(USBD_ENABLE); - au_writel(0, USBD_ENABLE); au_sync(); - - /* Save interrupt controller state. */ - save_au1xxx_intctl(); - - /* Clocks and PLLs. */ - sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL); - - /* - * We don't really need to do this one, but unless we - * write it again it won't have a valid value if we - * happen to read it. - */ - sleep_cpu_pll_cntrl = au_readl(SYS_CPUPLL); - - sleep_pin_function = au_readl(SYS_PINFUNC); - - /* Save the static memory controller configuration. */ - sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0); - sleep_static_memctlr[0][1] = au_readl(MEM_STTIME0); - sleep_static_memctlr[0][2] = au_readl(MEM_STADDR0); - sleep_static_memctlr[1][0] = au_readl(MEM_STCFG1); - sleep_static_memctlr[1][1] = au_readl(MEM_STTIME1); - sleep_static_memctlr[1][2] = au_readl(MEM_STADDR1); - sleep_static_memctlr[2][0] = au_readl(MEM_STCFG2); - sleep_static_memctlr[2][1] = au_readl(MEM_STTIME2); - sleep_static_memctlr[2][2] = au_readl(MEM_STADDR2); - sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3); - sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3); - sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3); -} - -static void restore_core_regs(void) -{ - extern void restore_au1xxx_intctl(void); - extern void wakeup_counter0_adjust(void); - - au_writel(sleep_aux_pll_cntrl, SYS_AUXPLL); au_sync(); - au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync(); - au_writel(sleep_pin_function, SYS_PINFUNC); au_sync(); - - /* Restore the static memory controller configuration. */ - au_writel(sleep_static_memctlr[0][0], MEM_STCFG0); - au_writel(sleep_static_memctlr[0][1], MEM_STTIME0); - au_writel(sleep_static_memctlr[0][2], MEM_STADDR0); - au_writel(sleep_static_memctlr[1][0], MEM_STCFG1); - au_writel(sleep_static_memctlr[1][1], MEM_STTIME1); - au_writel(sleep_static_memctlr[1][2], MEM_STADDR1); - au_writel(sleep_static_memctlr[2][0], MEM_STCFG2); - au_writel(sleep_static_memctlr[2][1], MEM_STTIME2); - au_writel(sleep_static_memctlr[2][2], MEM_STADDR2); - au_writel(sleep_static_memctlr[3][0], MEM_STCFG3); - au_writel(sleep_static_memctlr[3][1], MEM_STTIME3); - au_writel(sleep_static_memctlr[3][2], MEM_STADDR3); - - /* - * Enable the UART if it was enabled before sleep. - * I guess I should define module control bits........ - */ - if (sleep_uart0_enable & 0x02) { - au_writel(0, UART0_ADDR + UART_MOD_CNTRL); au_sync(); - au_writel(1, UART0_ADDR + UART_MOD_CNTRL); au_sync(); - au_writel(3, UART0_ADDR + UART_MOD_CNTRL); au_sync(); - au_writel(sleep_uart0_inten, UART0_ADDR + UART_IER); au_sync(); - au_writel(sleep_uart0_fifoctl, UART0_ADDR + UART_FCR); au_sync(); - au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync(); - au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync(); - } - - restore_au1xxx_intctl(); - wakeup_counter0_adjust(); -} - -unsigned long suspend_mode; - -void wakeup_from_suspend(void) -{ - suspend_mode = 0; -} - -int au_sleep(void) -{ - unsigned long wakeup, flags; - extern void save_and_sleep(void); - - spin_lock_irqsave(&pm_lock, flags); - - save_core_regs(); - - flush_cache_all(); - - /** - ** The code below is all system dependent and we should probably - ** have a function call out of here to set this up. You need - ** to configure the GPIO or timer interrupts that will bring - ** you out of sleep. - ** For testing, the TOY counter wakeup is useful. - **/ -#if 0 - au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD); - - /* GPIO 6 can cause a wake up event */ - wakeup = au_readl(SYS_WAKEMSK); - wakeup &= ~(1 << 8); /* turn off match20 wakeup */ - wakeup |= 1 << 6; /* turn on GPIO 6 wakeup */ -#else - /* For testing, allow match20 to wake us up. */ -#ifdef SLEEP_TEST_TIMEOUT - wakeup_counter0_set(sleep_ticks); -#endif - wakeup = 1 << 8; /* turn on match20 wakeup */ - wakeup = 0; -#endif - au_writel(1, SYS_WAKESRC); /* clear cause */ - au_sync(); - au_writel(wakeup, SYS_WAKEMSK); - au_sync(); - - save_and_sleep(); - - /* - * After a wakeup, the cpu vectors back to 0x1fc00000, so - * it's up to the boot code to get us back here. - */ - restore_core_regs(); - spin_unlock_irqrestore(&pm_lock, flags); - return 0; -} - -static int pm_do_sleep(ctl_table *ctl, int write, struct file *file, - void __user *buffer, size_t *len, loff_t *ppos) -{ -#ifdef SLEEP_TEST_TIMEOUT -#define TMPBUFLEN2 16 - char buf[TMPBUFLEN2], *p; -#endif - - if (!write) - *len = 0; - else { -#ifdef SLEEP_TEST_TIMEOUT - if (*len > TMPBUFLEN2 - 1) - return -EFAULT; - if (copy_from_user(buf, buffer, *len)) - return -EFAULT; - buf[*len] = 0; - p = buf; - sleep_ticks = simple_strtoul(p, &p, 0); -#endif - - au_sleep(); - } - return 0; -} - -static int pm_do_freq(ctl_table *ctl, int write, struct file *file, - void __user *buffer, size_t *len, loff_t *ppos) -{ - int retval = 0, i; - unsigned long val, pll; -#define TMPBUFLEN 64 -#define MAX_CPU_FREQ 396 - char buf[TMPBUFLEN], *p; - unsigned long flags, intc0_mask, intc1_mask; - unsigned long old_baud_base, old_cpu_freq, old_clk, old_refresh; - unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh; - unsigned long baud_rate; - - spin_lock_irqsave(&pm_lock, flags); - if (!write) - *len = 0; - else { - /* Parse the new frequency */ - if (*len > TMPBUFLEN - 1) { - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - if (copy_from_user(buf, buffer, *len)) { - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - buf[*len] = 0; - p = buf; - val = simple_strtoul(p, &p, 0); - if (val > MAX_CPU_FREQ) { - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - - pll = val / 12; - if ((pll > 33) || (pll < 7)) { /* 396 MHz max, 84 MHz min */ - /* Revisit this for higher speed CPUs */ - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - - old_baud_base = get_au1x00_uart_baud_base(); - old_cpu_freq = get_au1x00_speed(); - - new_cpu_freq = pll * 12 * 1000000; - new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL) - & 0x03) + 2) * 16)); - set_au1x00_speed(new_cpu_freq); - set_au1x00_uart_baud_base(new_baud_base); - - old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff; - new_refresh = ((old_refresh * new_cpu_freq) / old_cpu_freq) | - (au_readl(MEM_SDREFCFG) & ~0x1ffffff); - - au_writel(pll, SYS_CPUPLL); - au_sync_delay(1); - au_writel(new_refresh, MEM_SDREFCFG); - au_sync_delay(1); - - for (i = 0; i < 4; i++) - if (au_readl(UART_BASE + UART_MOD_CNTRL + - i * 0x00100000) == 3) { - old_clk = au_readl(UART_BASE + UART_CLK + - i * 0x00100000); - baud_rate = old_baud_base / old_clk; - /* - * We won't get an exact baud rate and the error - * could be significant enough that our new - * calculation will result in a clock that will - * give us a baud rate that's too far off from - * what we really want. - */ - if (baud_rate > 100000) - baud_rate = 115200; - else if (baud_rate > 50000) - baud_rate = 57600; - else if (baud_rate > 30000) - baud_rate = 38400; - else if (baud_rate > 17000) - baud_rate = 19200; - else - baud_rate = 9600; - new_clk = new_baud_base / baud_rate; - au_writel(new_clk, UART_BASE + UART_CLK + - i * 0x00100000); - au_sync_delay(10); - } - } - - /* - * We don't want _any_ interrupts other than match20. Otherwise our - * au1000_calibrate_delay() calculation will be off, potentially a lot. - */ - intc0_mask = save_local_and_disable(0); - intc1_mask = save_local_and_disable(1); - local_enable_irq(AU1000_TOY_MATCH2_INT); - spin_unlock_irqrestore(&pm_lock, flags); - au1000_calibrate_delay(); - restore_local_and_enable(0, intc0_mask); - restore_local_and_enable(1, intc1_mask); - - return retval; -} - - -static struct ctl_table pm_table[] = { - { - .ctl_name = CTL_UNNUMBERED, - .procname = "sleep", - .data = NULL, - .maxlen = 0, - .mode = 0600, - .proc_handler = &pm_do_sleep - }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "freq", - .data = NULL, - .maxlen = 0, - .mode = 0600, - .proc_handler = &pm_do_freq - }, - {} -}; - -static struct ctl_table pm_dir_table[] = { - { - .ctl_name = CTL_UNNUMBERED, - .procname = "pm", - .mode = 0555, - .child = pm_table - }, - {} -}; - -/* - * Initialize power interface - */ -static int __init pm_init(void) -{ - register_sysctl_table(pm_dir_table); - return 0; -} - -__initcall(pm_init); - -/* - * This is right out of init/main.c - */ - -/* - * This is the number of bits of precision for the loops_per_jiffy. - * Each bit takes on average 1.5/HZ seconds. This (like the original) - * is a little better than 1%. - */ -#define LPS_PREC 8 - -static void au1000_calibrate_delay(void) -{ - unsigned long ticks, loopbit; - int lps_precision = LPS_PREC; - - loops_per_jiffy = 1 << 12; - - while (loops_per_jiffy <<= 1) { - /* Wait for "start of" clock tick */ - ticks = jiffies; - while (ticks == jiffies) - /* nothing */ ; - /* Go ... */ - ticks = jiffies; - __delay(loops_per_jiffy); - ticks = jiffies - ticks; - if (ticks) - break; - } - - /* - * Do a binary approximation to get loops_per_jiffy set to be equal - * one clock (up to lps_precision bits) - */ - loops_per_jiffy >>= 1; - loopbit = loops_per_jiffy; - while (lps_precision-- && (loopbit >>= 1)) { - loops_per_jiffy |= loopbit; - ticks = jiffies; - while (ticks == jiffies); - ticks = jiffies; - __delay(loops_per_jiffy); - if (jiffies != ticks) /* longer than 1 tick */ - loops_per_jiffy &= ~loopbit; - } -} -#endif /* CONFIG_PM */ |