Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits)
  [POWERPC] Add memchr() to the bootwrapper
  [POWERPC] Implement logging of unhandled signals
  [POWERPC] Add legacy serial support for OPB with flattened device tree
  [POWERPC] Use 1TB segments
  [POWERPC] XilinxFB: Allow fixed framebuffer base address
  [POWERPC] XilinxFB: Add support for custom screen resolution
  [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters
  [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci
  [POWERPC] 4xx: Kilauea defconfig file
  [POWERPC] 4xx: Kilauea DTS
  [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x
  [POWERPC] 4xx: Add AMCC 405EX support to cputable.c
  [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable
  [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers
  [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig
  [POWERPC] 85xx: Killed <asm/mpc85xx.h>
  [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS
  [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding.
  [POWERPC] mpc8272ads: Remove muram from the CPM reg property.
  [POWERPC] Make clockevents work on PPC601 processors
  ...

Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.

1 files changed, 124 insertions, 125 deletions

diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 481099756e4..e5a84ef9f4b 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -29,7 +29,6 @@
 			timebase-frequency = <0>;	// from bootloader
 			bus-frequency = <0>;		// from bootloader
 			clock-frequency = <0>;		// from bootloader
-			32-bit;
 		};
 	};
 
@@ -46,7 +45,6 @@
 	soc8349@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		#interrupt-cells = <2>;
 		device_type = "soc";
 		ranges = <0 e0000000 00100000>;
 		reg = <e0000000 00000200>;
@@ -78,11 +76,11 @@
 
 		spi@7000 {
 			device_type = "spi";
-			compatible = "mpc83xx_spi";
+			compatible = "fsl_spi";
 			reg = <7000 1000>;
 			interrupts = <10 8>;
 			interrupt-parent = < &ipic >;
-			mode = <0>;
+			mode = "cpu";
 		};
 
 		/* phy type (ULPI or SERIAL) are only types supportted for MPH */
@@ -146,6 +144,7 @@
 			interrupts = <20 8 21 8 22 8>;
 			interrupt-parent = < &ipic >;
 			phy-handle = < &phy0 >;
+			linux,network-index = <0>;
 		};
 
 		ethernet@25000 {
@@ -165,6 +164,7 @@
 			interrupts = <23 8 24 8 25 8>;
 			interrupt-parent = < &ipic >;
 			phy-handle = < &phy1 >;
+			linux,network-index = <1>;
 		};
 
 		serial@4500 {
@@ -185,126 +185,6 @@
 			interrupt-parent = < &ipic >;
 		};
 
-		pci@8500 {
-			interrupt-map-mask = <f800 0 0 7>;
-			interrupt-map = <
-
-					/* IDSEL 0x11 */
-					 8800 0 0 1 &ipic 14 8
-					 8800 0 0 2 &ipic 15 8
-					 8800 0 0 3 &ipic 16 8
-					 8800 0 0 4 &ipic 17 8
-
-					/* IDSEL 0x12 */
-					 9000 0 0 1 &ipic 16 8
-					 9000 0 0 2 &ipic 17 8
-					 9000 0 0 3 &ipic 14 8
-					 9000 0 0 4 &ipic 15 8
-
-					/* IDSEL 0x13 */
-					 9800 0 0 1 &ipic 17 8
-					 9800 0 0 2 &ipic 14 8
-					 9800 0 0 3 &ipic 15 8
-					 9800 0 0 4 &ipic 16 8
-
-					/* IDSEL 0x15 */
-					 a800 0 0 1 &ipic 14 8
-					 a800 0 0 2 &ipic 15 8
-					 a800 0 0 3 &ipic 16 8
-					 a800 0 0 4 &ipic 17 8
-
-					/* IDSEL 0x16 */
-					 b000 0 0 1 &ipic 17 8
-					 b000 0 0 2 &ipic 14 8
-					 b000 0 0 3 &ipic 15 8
-					 b000 0 0 4 &ipic 16 8
-
-					/* IDSEL 0x17 */
-					 b800 0 0 1 &ipic 16 8
-					 b800 0 0 2 &ipic 17 8
-					 b800 0 0 3 &ipic 14 8
-					 b800 0 0 4 &ipic 15 8
-
-					/* IDSEL 0x18 */
-					 c000 0 0 1 &ipic 15 8
-					 c000 0 0 2 &ipic 16 8
-					 c000 0 0 3 &ipic 17 8
-					 c000 0 0 4 &ipic 14 8>;
-			interrupt-parent = < &ipic >;
-			interrupts = <42 8>;
-			bus-range = <0 0>;
-			ranges = <02000000 0 90000000 90000000 0 10000000
-				  42000000 0 80000000 80000000 0 10000000
-				  01000000 0 00000000 e2000000 0 00100000>;
-			clock-frequency = <3f940aa>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			reg = <8500 100>;
-			compatible = "fsl,mpc8349-pci";
-			device_type = "pci";
-		};
-
-		pci@8600 {
-			interrupt-map-mask = <f800 0 0 7>;
-			interrupt-map = <
-
-					/* IDSEL 0x11 */
-					 8800 0 0 1 &ipic 14 8
-					 8800 0 0 2 &ipic 15 8
-					 8800 0 0 3 &ipic 16 8
-					 8800 0 0 4 &ipic 17 8
-
-					/* IDSEL 0x12 */
-					 9000 0 0 1 &ipic 16 8
-					 9000 0 0 2 &ipic 17 8
-					 9000 0 0 3 &ipic 14 8
-					 9000 0 0 4 &ipic 15 8
-
-					/* IDSEL 0x13 */
-					 9800 0 0 1 &ipic 17 8
-					 9800 0 0 2 &ipic 14 8
-					 9800 0 0 3 &ipic 15 8
-					 9800 0 0 4 &ipic 16 8
-
-					/* IDSEL 0x15 */
-					 a800 0 0 1 &ipic 14 8
-					 a800 0 0 2 &ipic 15 8
-					 a800 0 0 3 &ipic 16 8
-					 a800 0 0 4 &ipic 17 8
-
-					/* IDSEL 0x16 */
-					 b000 0 0 1 &ipic 17 8
-					 b000 0 0 2 &ipic 14 8
-					 b000 0 0 3 &ipic 15 8
-					 b000 0 0 4 &ipic 16 8
-
-					/* IDSEL 0x17 */
-					 b800 0 0 1 &ipic 16 8
-					 b800 0 0 2 &ipic 17 8
-					 b800 0 0 3 &ipic 14 8
-					 b800 0 0 4 &ipic 15 8
-
-					/* IDSEL 0x18 */
-					 c000 0 0 1 &ipic 15 8
-					 c000 0 0 2 &ipic 16 8
-					 c000 0 0 3 &ipic 17 8
-					 c000 0 0 4 &ipic 14 8>;
-			interrupt-parent = < &ipic >;
-			interrupts = <42 8>;
-			bus-range = <0 0>;
-			ranges = <02000000 0 b0000000 b0000000 0 10000000
-				  42000000 0 a0000000 a0000000 0 10000000
-				  01000000 0 00000000 e2100000 0 00100000>;
-			clock-frequency = <3f940aa>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			reg = <8600 100>;
-			compatible = "fsl,mpc8349-pci";
-			device_type = "pci";
-		};
-
 		/* May need to remove if on a part without crypto engine */
 		crypto@30000 {
 			device_type = "crypto";
@@ -332,8 +212,127 @@
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <700 100>;
-			built-in;
 			device_type = "ipic";
 		};
 	};
+
+	pci@e0008500 {
+		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map = <
+
+				/* IDSEL 0x11 */
+				 8800 0 0 1 &ipic 14 8
+				 8800 0 0 2 &ipic 15 8
+				 8800 0 0 3 &ipic 16 8
+				 8800 0 0 4 &ipic 17 8
+
+				/* IDSEL 0x12 */
+				 9000 0 0 1 &ipic 16 8
+				 9000 0 0 2 &ipic 17 8
+				 9000 0 0 3 &ipic 14 8
+				 9000 0 0 4 &ipic 15 8
+
+				/* IDSEL 0x13 */
+				 9800 0 0 1 &ipic 17 8
+				 9800 0 0 2 &ipic 14 8
+				 9800 0 0 3 &ipic 15 8
+				 9800 0 0 4 &ipic 16 8
+
+				/* IDSEL 0x15 */
+				 a800 0 0 1 &ipic 14 8
+				 a800 0 0 2 &ipic 15 8
+				 a800 0 0 3 &ipic 16 8
+				 a800 0 0 4 &ipic 17 8
+
+				/* IDSEL 0x16 */
+				 b000 0 0 1 &ipic 17 8
+				 b000 0 0 2 &ipic 14 8
+				 b000 0 0 3 &ipic 15 8
+				 b000 0 0 4 &ipic 16 8
+
+				/* IDSEL 0x17 */
+				 b800 0 0 1 &ipic 16 8
+				 b800 0 0 2 &ipic 17 8
+				 b800 0 0 3 &ipic 14 8
+				 b800 0 0 4 &ipic 15 8
+
+				/* IDSEL 0x18 */
+				 c000 0 0 1 &ipic 15 8
+				 c000 0 0 2 &ipic 16 8
+				 c000 0 0 3 &ipic 17 8
+				 c000 0 0 4 &ipic 14 8>;
+		interrupt-parent = < &ipic >;
+		interrupts = <42 8>;
+		bus-range = <0 0>;
+		ranges = <02000000 0 90000000 90000000 0 10000000
+			  42000000 0 80000000 80000000 0 10000000
+			  01000000 0 00000000 e2000000 0 00100000>;
+		clock-frequency = <3f940aa>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <e0008500 100>;
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci@e0008600 {
+		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map = <
+
+				/* IDSEL 0x11 */
+				 8800 0 0 1 &ipic 14 8
+				 8800 0 0 2 &ipic 15 8
+				 8800 0 0 3 &ipic 16 8
+				 8800 0 0 4 &ipic 17 8
+
+				/* IDSEL 0x12 */
+				 9000 0 0 1 &ipic 16 8
+				 9000 0 0 2 &ipic 17 8
+				 9000 0 0 3 &ipic 14 8
+				 9000 0 0 4 &ipic 15 8
+
+				/* IDSEL 0x13 */
+				 9800 0 0 1 &ipic 17 8
+				 9800 0 0 2 &ipic 14 8
+				 9800 0 0 3 &ipic 15 8
+				 9800 0 0 4 &ipic 16 8
+
+				/* IDSEL 0x15 */
+				 a800 0 0 1 &ipic 14 8
+				 a800 0 0 2 &ipic 15 8
+				 a800 0 0 3 &ipic 16 8
+				 a800 0 0 4 &ipic 17 8
+
+				/* IDSEL 0x16 */
+				 b000 0 0 1 &ipic 17 8
+				 b000 0 0 2 &ipic 14 8
+				 b000 0 0 3 &ipic 15 8
+				 b000 0 0 4 &ipic 16 8
+
+				/* IDSEL 0x17 */
+				 b800 0 0 1 &ipic 16 8
+				 b800 0 0 2 &ipic 17 8
+				 b800 0 0 3 &ipic 14 8
+				 b800 0 0 4 &ipic 15 8
+
+				/* IDSEL 0x18 */
+				 c000 0 0 1 &ipic 15 8
+				 c000 0 0 2 &ipic 16 8
+				 c000 0 0 3 &ipic 17 8
+				 c000 0 0 4 &ipic 14 8>;
+		interrupt-parent = < &ipic >;
+		interrupts = <42 8>;
+		bus-range = <0 0>;
+		ranges = <02000000 0 b0000000 b0000000 0 10000000
+			  42000000 0 a0000000 a0000000 0 10000000
+			  01000000 0 00000000 e2100000 0 00100000>;
+		clock-frequency = <3f940aa>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <e0008600 100>;
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
 };