Merge branch 'for-2.6.24' of git://git.secretlab.ca/git/linux-2.6-mpc52xx into for-2.6.24

1 files changed, 50 insertions, 45 deletions

diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index e11d27f9c4f..0caa3d955c3 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -15,32 +15,13 @@
 
 #undef DEBUG
 
-#include <linux/stddef.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
 #include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
+#include <linux/of.h>
 #include <asm/time.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
-#include <asm/ipic.h>
-#include <asm/irq.h>
 #include <asm/prom.h>
-#include <asm/udbg.h>
-#include <sysdev/fsl_soc.h>
-#include <asm/of_platform.h>
-
 #include <asm/mpc52xx.h>
 
 /* ************************************************************************
@@ -49,19 +30,56 @@
  *
  */
 
+/*
+ * Fix clock configuration.
+ *
+ * Firmware is supposed to be responsible for this.  If you are creating a
+ * new board port, do *NOT* duplicate this code.  Fix your boot firmware
+ * to set it correctly in the first place
+ */
 static void __init
-lite5200_setup_cpu(void)
+lite5200_fix_clock_config(void)
+{
+	struct mpc52xx_cdm  __iomem *cdm;
+
+	/* Map zones */
+	cdm = mpc52xx_find_and_map("mpc5200-cdm");
+	if (!cdm) {
+		printk(KERN_ERR "%s() failed; expect abnormal behaviour\n",
+		       __FUNCTION__);
+		return;
+	}
+
+	/* Use internal 48 Mhz */
+	out_8(&cdm->ext_48mhz_en, 0x00);
+	out_8(&cdm->fd_enable, 0x01);
+	if (in_be32(&cdm->rstcfg) & 0x40)	/* Assumes 33Mhz clock */
+		out_be16(&cdm->fd_counters, 0x0001);
+	else
+		out_be16(&cdm->fd_counters, 0x5555);
+
+	/* Unmap the regs */
+	iounmap(cdm);
+}
+
+/*
+ * Fix setting of port_config register.
+ *
+ * Firmware is supposed to be responsible for this.  If you are creating a
+ * new board port, do *NOT* duplicate this code.  Fix your boot firmware
+ * to set it correctly in the first place
+ */
+static void __init
+lite5200_fix_port_config(void)
 {
 	struct mpc52xx_gpio __iomem *gpio;
 	u32 port_config;
 
-	/* Map zones */
 	gpio = mpc52xx_find_and_map("mpc5200-gpio");
 	if (!gpio) {
-		printk(KERN_ERR __FILE__ ": "
-			"Error while mapping GPIO register for port config. "
-			"Expect some abnormal behavior\n");
-		goto error;
+		printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
+		       __FUNCTION__);
+		return;
 	}
 
 	/* Set port config */
@@ -80,7 +98,6 @@ lite5200_setup_cpu(void)
 	out_be32(&gpio->port_config, port_config);
 
 	/* Unmap zone */
-error:
 	iounmap(gpio);
 }
 
@@ -119,9 +136,12 @@ static void __init lite5200_setup_arch(void)
 	if (ppc_md.progress)
 		ppc_md.progress("lite5200_setup_arch()", 0);
 
-	/* CPU & Port mux setup */
-	mpc52xx_setup_cpu();	/* Generic */
-	lite5200_setup_cpu();	/* Platorm specific */
+	/* Fix things that firmware should have done. */
+	lite5200_fix_clock_config();
+	lite5200_fix_port_config();
+
+	/* Some mpc5200 & mpc5200b related configuration */
+	mpc5200_setup_xlb_arbiter();
 
 #ifdef CONFIG_PM
 	mpc52xx_suspend.board_suspend_prepare = lite5200_suspend_prepare;
@@ -150,20 +170,6 @@ static void __init lite5200_setup_arch(void)
 
 }
 
-static void lite5200_show_cpuinfo(struct seq_file *m)
-{
-	struct device_node* np = of_find_all_nodes(NULL);
-	const char *model = NULL;
-
-	if (np)
-		model = of_get_property(np, "model", NULL);
-
-	seq_printf(m, "vendor\t\t:	Freescale Semiconductor\n");
-	seq_printf(m, "machine\t\t:	%s\n", model ? model : "unknown");
-
-	of_node_put(np);
-}
-
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
@@ -187,6 +193,5 @@ define_machine(lite5200) {
 	.init		= mpc52xx_declare_of_platform_devices,
 	.init_IRQ 	= mpc52xx_init_irq,
 	.get_irq 	= mpc52xx_get_irq,
-	.show_cpuinfo	= lite5200_show_cpuinfo,
 	.calibrate_decr	= generic_calibrate_decr,
 };