Merge branch 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc

* 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: (25 commits)
  [POWERPC] 85xx: Added needed MPC85xx PCI device IDs
  [POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs
  [POWERPC] 85xxCDS: MPC8548 DTS cleanup.
  [POWERPC] 85xxCDS: Misc 8548 PCI Corrections.
  [POWERPC] 85xxCDS: Delay 8259 cascade hookup.
  [POWERPC] 85xxCDS: Make sure restart resets the PCI bus.
  [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line.
  [POWERPC] FSL: Add support for PCI-X controllers
  [POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB
  [POWERPC] Provide ability to setup P2P bridge registers from struct resource
  [POWERPC] Add basic PCI/PCI Express support for 8544DS board
  [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime
  [POWERPC] Removed setup_indirect_pci_nomap
  [POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDS
  [POWERPC] 85xx: Added 8568 PCIe support
  [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected
  [POWERPC] Add basic PCI node for mpc8568mds board
  [POWERPC] Use Freescale pci/pcie common code for 85xx boards
  [POWERPC] Update PCI nodes in the 83xx/85xx boards device tree
  [POWERPC] Add 8548 CDS PCI express controller node and PCI-X device node
  ...

17 files changed, 378 insertions, 374 deletions

diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
index da20832b27f..2d1b05b9f8e 100644
--- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
@@ -553,7 +553,8 @@ static void __init mpc82xx_add_bridge(struct device_node *np)
 
 	setup_indirect_pci(hose,
 			   r.start + offsetof(pci_cpm2_t, pci_cfg_addr),
-			   r.start + offsetof(pci_cpm2_t, pci_cfg_data));
+			   r.start + offsetof(pci_cpm2_t, pci_cfg_data),
+			   0);
 
 	pci_process_bridge_OF_ranges(hose, np, 1);
 }
diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c
index c0e2b89154e..92069469de2 100644
--- a/arch/powerpc/platforms/83xx/pci.c
+++ b/arch/powerpc/platforms/83xx/pci.c
@@ -74,11 +74,11 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
 	 */
 	/* PCI 1 */
 	if ((rsrc.start & 0xfffff) == 0x8500) {
-		setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304);
+		setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0);
 	}
 	/* PCI 2 */
 	if ((rsrc.start & 0xfffff) == 0x8600) {
-		setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384);
+		setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0);
 		primary = 0;
 	}
 
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 629926e01e9..f58184086c8 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -18,6 +18,7 @@ config MPC8560_ADS
 config MPC85xx_CDS
 	bool "Freescale MPC85xx CDS"
 	select DEFAULT_UIMAGE
+	select PPC_I8259
 	help
 	  This option enables support for the MPC85xx CDS board
 
@@ -30,6 +31,7 @@ config MPC85xx_MDS
 
 config MPC8544_DS
 	bool "Freescale MPC8544 DS"
+	select PPC_I8259
 	select DEFAULT_UIMAGE
 	help
 	  This option enables support for the MPC8544 DS board
@@ -50,9 +52,9 @@ config MPC8560
 config MPC85xx
 	bool
 	select PPC_UDBG_16550
-	select PPC_INDIRECT_PCI
-	select PPC_INDIRECT_PCI_BE
+	select PPC_INDIRECT_PCI if PCI
 	select MPIC
+	select FSL_PCI if PCI
 	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
 	default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS \
 		|| MPC85xx_MDS || MPC8544_DS
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 4e02cbb14cf..d70f2d0f9d3 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for the PowerPC 85xx linux kernel.
 #
-obj-$(CONFIG_PPC_85xx)	+= misc.o pci.o
+obj-$(CONFIG_PPC_85xx)	+= misc.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
diff --git a/arch/powerpc/platforms/85xx/mpc8544_ds.c b/arch/powerpc/platforms/85xx/mpc8544_ds.c
index 6fb90aab879..4905f6f8903 100644
--- a/arch/powerpc/platforms/85xx/mpc8544_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8544_ds.c
@@ -2,6 +2,8 @@
  * MPC8544 DS Board Setup
  *
  * Author Xianghua Xiao (x.xiao@freescale.com)
+ * Roy Zang <tie-fei.zang@freescale.com>
+ * 	- Add PCI/PCI Exprees support
  * Copyright 2007 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -12,13 +14,16 @@
 
 #include <linux/stddef.h>
 #include <linux/kernel.h>
+#include <linux/pci.h>
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
+#include <linux/interrupt.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
 #include <asm/machdep.h>
+#include <asm/pci-bridge.h>
 #include <asm/mpc85xx.h>
 #include <mm/mmu_decl.h>
 #include <asm/prom.h>
@@ -27,6 +32,7 @@
 #include <asm/i8259.h>
 
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include "mpc85xx.h"
 
 #undef DEBUG
@@ -37,6 +43,17 @@
 #define DBG(fmt, args...)
 #endif
 
+#ifdef CONFIG_PPC_I8259
+static void mpc8544_8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int cascade_irq = i8259_irq();
+
+	if (cascade_irq != NO_IRQ) {
+		generic_handle_irq(cascade_irq);
+	}
+	desc->chip->eoi(irq);
+}
+#endif	/* CONFIG_PPC_I8259 */
 
 void __init mpc8544_ds_pic_init(void)
 {
@@ -96,19 +113,240 @@ void __init mpc8544_ds_pic_init(void)
 #endif	/* CONFIG_PPC_I8259 */
 }
 
+#ifdef CONFIG_PCI
+enum pirq { PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH };
+
+/*
+ * Value in  table -- IRQ number
+ */
+const unsigned char uli1575_irq_route_table[16] = {
+	0,		/* 0: Reserved */
+	0x8,
+	0,		/* 2: Reserved */
+	0x2,
+	0x4,
+	0x5,
+	0x7,
+	0x6,
+	0,		/* 8: Reserved */
+	0x1,
+	0x3,
+	0x9,
+	0xb,
+	0,		/* 13: Reserved */
+	0xd,
+	0xf,
+};
+
+static int __devinit
+get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
+{
+	struct of_irq oirq;
+	u32 laddr[3];
+	struct device_node *hosenode = hose ? hose->arch_data : NULL;
+
+	if (!hosenode)
+		return -EINVAL;
+
+	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
+	laddr[1] = laddr[2] = 0;
+	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
+	DBG("mpc8544_ds: pci irq addr %x, slot %d, pin %d, irq %d\n",
+	    laddr[0], slot, pin, oirq.specifier[0]);
+	return oirq.specifier[0];
+}
+
+/*8259*/
+static void __devinit quirk_uli1575(struct pci_dev *dev)
+{
+	unsigned short temp;
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	unsigned char irq2pin[16];
+	unsigned long pirq_map_word = 0;
+	u32 irq;
+	int i;
+
+	/*
+	 * ULI1575 interrupts route setup
+	 */
+	memset(irq2pin, 0, 16);	/* Initialize default value 0 */
+
+	irq2pin[6]=PIRQA+3;	/* enabled mapping for IRQ6 to PIRQD, used by SATA */
+
+	/*
+	 * PIRQE -> PIRQF mapping set manually
+	 *
+	 * IRQ pin   IRQ#
+	 * PIRQE ---- 9
+	 * PIRQF ---- 10
+	 * PIRQG ---- 11
+	 * PIRQH ---- 12
+	 */
+	for (i = 0; i < 4; i++)
+		irq2pin[i + 9] = PIRQE + i;
+
+	/* Set IRQ-PIRQ Mapping to ULI1575 */
+	for (i = 0; i < 16; i++)
+		if (irq2pin[i])
+			pirq_map_word |= (uli1575_irq_route_table[i] & 0xf)
+			    << ((irq2pin[i] - PIRQA) * 4);
+
+	pirq_map_word |= 1<<26;	/* disable INTx in EP mode*/
+
+	/* ULI1575 IRQ mapping conf register default value is 0xb9317542 */
+	DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n",
+		(int)pirq_map_word);
+	pci_write_config_dword(dev, 0x48, pirq_map_word);
+
+#define ULI1575_SET_DEV_IRQ(slot, pin, reg)				\
+	do {								\
+		int irq;						\
+		irq = get_pci_irq_from_of(hose, slot, pin);		\
+		if (irq > 0 && irq < 16) 				\
+			pci_write_config_byte(dev, reg, irq2pin[irq]);	\
+		else							\
+			printk(KERN_WARNING "ULI1575 device"		\
+				"(slot %d, pin %d) irq %d is invalid.\n", \
+				slot, pin, irq);			\
+	} while(0)
+
+	/* USB 1.1 OHCI controller 1, slot 28, pin 1 */
+	ULI1575_SET_DEV_IRQ(28, 1, 0x86);
+
+	/* USB 1.1 OHCI controller 2, slot 28, pin 2 */
+	ULI1575_SET_DEV_IRQ(28, 2, 0x87);
+
+	/* USB 1.1 OHCI controller 3, slot 28, pin 3 */
+	ULI1575_SET_DEV_IRQ(28, 3, 0x88);
+
+	/* USB 2.0 controller, slot 28, pin 4 */
+	irq = get_pci_irq_from_of(hose, 28, 4);
+	if (irq >= 0 && irq <= 15)
+		pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]);
+
+	/* Audio controller, slot 29, pin 1 */
+	ULI1575_SET_DEV_IRQ(29, 1, 0x8a);
+
+	/* Modem controller, slot 29, pin 2 */
+	ULI1575_SET_DEV_IRQ(29, 2, 0x8b);
+
+	/* HD audio controller, slot 29, pin 3 */
+	ULI1575_SET_DEV_IRQ(29, 3, 0x8c);
+
+	/* SMB interrupt: slot 30, pin 1 */
+	ULI1575_SET_DEV_IRQ(30, 1, 0x8e);
+
+	/* PMU ACPI SCI interrupt: slot 30, pin 2 */
+	ULI1575_SET_DEV_IRQ(30, 2, 0x8f);
+
+	/* Serial ATA interrupt: slot 31, pin 1 */
+	ULI1575_SET_DEV_IRQ(31, 1, 0x8d);
+
+	/* Primary PATA IDE IRQ: 14
+	 * Secondary PATA IDE IRQ: 15
+	 */
+	pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]);
+	pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]);
+
+	/* Set IRQ14 and IRQ15 to legacy IRQs */
+	pci_read_config_word(dev, 0x46, &temp);
+	temp |= 0xc000;
+	pci_write_config_word(dev, 0x46, temp);
+
+	/* Set i8259 interrupt trigger
+	 * IRQ 3:  Level
+	 * IRQ 4:  Level
+	 * IRQ 5:  Level
+	 * IRQ 6:  Level
+	 * IRQ 7:  Level
+	 * IRQ 9:  Level
+	 * IRQ 10: Level
+	 * IRQ 11: Level
+	 * IRQ 12: Level
+	 * IRQ 14: Edge
+	 * IRQ 15: Edge
+	 */
+	outb(0xfa, 0x4d0);
+	outb(0x1e, 0x4d1);
+
+#undef ULI1575_SET_DEV_IRQ
+}
+
+/* SATA */
+static void __devinit quirk_uli5288(struct pci_dev *dev)
+{
+	unsigned char c;
+
+	pci_read_config_byte(dev, 0x83, &c);
+	c |= 0x80;		/* read/write lock */
+	pci_write_config_byte(dev, 0x83, c);
+
+	pci_write_config_byte(dev, 0x09, 0x01);	/* Base class code: storage */
+	pci_write_config_byte(dev, 0x0a, 0x06);	/* IDE disk */
+
+	pci_read_config_byte(dev, 0x83, &c);
+	c &= 0x7f;
+	pci_write_config_byte(dev, 0x83, c);
+
+	pci_read_config_byte(dev, 0x84, &c);
+	c |= 0x01;				/* emulated PATA mode enabled */
+	pci_write_config_byte(dev, 0x84, c);
+}
+
+/* PATA */
+static void __devinit quirk_uli5229(struct pci_dev *dev)
+{
+	unsigned short temp;
+	pci_write_config_word(dev, 0x04, 0x0405);	/* MEM IO MSI */
+	pci_read_config_word(dev, 0x4a, &temp);
+	temp |= 0x1000;				/* Enable Native IRQ 14/15 */
+	pci_write_config_word(dev, 0x4a, temp);
+}
+
+/*Bridge*/
+static void __devinit early_uli5249(struct pci_dev *dev)
+{
+	unsigned char temp;
+	pci_write_config_word(dev, 0x04, 0x0007);	/* mem access */
+	pci_read_config_byte(dev, 0x7c, &temp);
+	pci_write_config_byte(dev, 0x7c, 0x80);	/* R/W lock control */
+	pci_write_config_byte(dev, 0x09, 0x01);	/* set as pci-pci bridge */
+	pci_write_config_byte(dev, 0x7c, temp);	/* restore pci bus debug control */
+	dev->class |= 0x1;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
+#endif	/* CONFIG_PCI */
 
 /*
  * Setup the architecture
  */
 static void __init mpc8544_ds_setup_arch(void)
 {
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
 	if (ppc_md.progress)
 		ppc_md.progress("mpc8544_ds_setup_arch()", 0);
 
+#ifdef CONFIG_PCI
+	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) {
+		struct resource rsrc;
+		of_address_to_resource(np, 0, &rsrc);
+		if ((rsrc.start & 0xfffff) == 0xb000)
+			fsl_add_bridge(np, 1);
+		else
+			fsl_add_bridge(np, 0);
+	}
+#endif
+
 	printk("MPC8544 DS board from Freescale Semiconductor\n");
 }
 
-
 /*
  * Called very early, device-tree isn't unflattened
  */
@@ -124,6 +362,7 @@ define_machine(mpc8544_ds) {
 	.probe			= mpc8544_ds_probe,
 	.setup_arch		= mpc8544_ds_setup_arch,
 	.init_IRQ		= mpc8544_ds_pic_init,
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 	.get_irq		= mpic_get_irq,
 	.restart		= mpc85xx_restart,
 	.calibrate_decr		= generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h
index 7286ffac2c1..5b34deef12b 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx.h
+++ b/arch/powerpc/platforms/85xx/mpc85xx.h
@@ -15,4 +15,3 @@
  */
 
 extern void mpc85xx_restart(char *);
-extern int mpc85xx_add_bridge(struct device_node *dev);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 7235f702394..40a828675c7 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -29,6 +29,7 @@
 #include <asm/udbg.h>
 
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include "mpc85xx.h"
 
 #ifdef CONFIG_CPM2
@@ -217,7 +218,7 @@ static void __init mpc85xx_ads_setup_arch(void)
 
 #ifdef CONFIG_PCI
 	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
-		mpc85xx_add_bridge(np);
+		fsl_add_bridge(np, 1);
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 }
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 50c8d645836..6a171e9abf7 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -24,6 +24,7 @@
 #include <linux/seq_file.h>
 #include <linux/initrd.h>
 #include <linux/module.h>
+#include <linux/interrupt.h>
 #include <linux/fsl_devices.h>
 
 #include <asm/system.h>
@@ -45,6 +46,7 @@
 #include <asm/i8259.h>
 
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include "mpc85xx.h"
 
 static int cds_pci_slot = 2;
@@ -58,8 +60,6 @@ static volatile u8 *cadmus;
 static int mpc85xx_exclude_device(struct pci_controller *hose,
 				  u_char bus, u_char devfn)
 {
-	if ((bus == hose->first_busno) && PCI_SLOT(devfn) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
 	/* We explicitly do not go past the Tundra 320 Bridge */
 	if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -69,6 +69,37 @@ static int mpc85xx_exclude_device(struct pci_controller *hose,
 		return PCIBIOS_SUCCESSFUL;
 }
 
+static void mpc85xx_cds_restart(char *cmd)
+{
+	struct pci_dev *dev;
+	u_char tmp;
+
+	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
+					NULL))) {
+
+		/* Use the VIA Super Southbridge to force a PCI reset */
+		pci_read_config_byte(dev, 0x47, &tmp);
+		pci_write_config_byte(dev, 0x47, tmp | 1);
+
+		/* Flush the outbound PCI write queues */
+		pci_read_config_byte(dev, 0x47, &tmp);
+
+		/*
+		 *  At this point, the harware reset should have triggered.
+		 *  However, if it doesn't work for some mysterious reason,
+		 *  just fall through to the default reset below.
+		 */
+
+		pci_dev_put(dev);
+	}
+
+	/*
+	 *  If we can't find the VIA chip (maybe the P2P bridge is disabled)
+	 *  or the VIA chip reset didn't work, just use the default reset.
+	 */
+	mpc85xx_restart(NULL);
+}
+
 static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev)
 {
 	u_char c;
@@ -98,7 +129,7 @@ static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev)
 		/* There are two USB controllers.
 		 * Identify them by functon number
 		 */
-			if (PCI_FUNC(dev->devfn))
+			if (PCI_FUNC(dev->devfn) == 3)
 				dev->irq = 11;
 			else
 				dev->irq = 10;
@@ -109,17 +140,41 @@ static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev)
 	}
 }
 
+static void __devinit skip_fake_bridge(struct pci_dev *dev)
+{
+	/* Make it an error to skip the fake bridge
+	 * in pci_setup_device() in probe.c */
+	dev->hdr_type = 0x7f;
+}
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x3fff, skip_fake_bridge);
+DECLARE_PCI_FIXUP_EARLY(0x3fff, 0x1957, skip_fake_bridge);
+DECLARE_PCI_FIXUP_EARLY(0xff3f, 0x5719, skip_fake_bridge);
+
 #ifdef CONFIG_PPC_I8259
-#warning The i8259 PIC support is currently broken
-static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
+static void mpc85xx_8259_cascade_handler(unsigned int irq,
+					 struct irq_desc *desc)
 {
 	unsigned int cascade_irq = i8259_irq();
 
 	if (cascade_irq != NO_IRQ)
+		/* handle an interrupt from the 8259 */
 		generic_handle_irq(cascade_irq);
 
-	desc->chip->eoi(irq);
+	/* check for any interrupts from the shared IRQ line */
+	handle_fasteoi_irq(irq, desc);
+}
+
+static irqreturn_t mpc85xx_8259_cascade_action(int irq, void *dev_id)
+{
+	return IRQ_HANDLED;
 }
+
+static struct irqaction mpc85xxcds_8259_irqaction = {
+	.handler = mpc85xx_8259_cascade_action,
+	.flags = IRQF_SHARED,
+	.mask = CPU_MASK_NONE,
+	.name = "8259 cascade",
+};
 #endif /* PPC_I8259 */
 #endif /* CONFIG_PCI */
 
@@ -128,10 +183,6 @@ static void __init mpc85xx_cds_pic_init(void)
 	struct mpic *mpic;
 	struct resource r;
 	struct device_node *np = NULL;
-#ifdef CONFIG_PPC_I8259
-	struct device_node *cascade_node = NULL;
-	int cascade_irq;
-#endif
 
 	np = of_find_node_by_type(np, "open-pic");
 
@@ -155,8 +206,19 @@ static void __init mpc85xx_cds_pic_init(void)
 	of_node_put(np);
 
 	mpic_init(mpic);
+}
+
+#if defined(CONFIG_PPC_I8259) && defined(CONFIG_PCI)
+static int mpc85xx_cds_8259_attach(void)
+{
+	int ret;
+	struct device_node *np = NULL;
+	struct device_node *cascade_node = NULL;
+	int cascade_irq;
+
+	if (!machine_is(mpc85xx_cds))
+		return 0;
 
-#ifdef CONFIG_PPC_I8259
 	/* Initialize the i8259 controller */
 	for_each_node_by_type(np, "interrupt-controller")
 		if (of_device_is_compatible(np, "chrp,iic")) {
@@ -166,22 +228,39 @@ static void __init mpc85xx_cds_pic_init(void)
 
 	if (cascade_node == NULL) {
 		printk(KERN_DEBUG "Could not find i8259 PIC\n");
-		return;
+		return -ENODEV;
 	}
 
 	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
 	if (cascade_irq == NO_IRQ) {
 		printk(KERN_ERR "Failed to map cascade interrupt\n");
-		return;
+		return -ENXIO;
 	}
 
 	i8259_init(cascade_node, 0);
 	of_node_put(cascade_node);
 
-	set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade);
-#endif /* CONFIG_PPC_I8259 */
+	/*
+	 *  Hook the interrupt to make sure desc->action is never NULL.
+	 *  This is required to ensure that the interrupt does not get
+	 *  disabled when the last user of the shared IRQ line frees their
+	 *  interrupt.
+	 */
+	if ((ret = setup_irq(cascade_irq, &mpc85xxcds_8259_irqaction))) {
+		printk(KERN_ERR "Failed to setup cascade interrupt\n");
+		return ret;
+	}
+
+	/* Success. Connect our low-level cascade handler. */
+	set_irq_handler(cascade_irq, mpc85xx_8259_cascade_handler);
+
+	return 0;
 }
 
+device_initcall(mpc85xx_cds_8259_attach);
+
+#endif /* CONFIG_PPC_I8259 */
+
 /*
  * Setup the architecture
  */
@@ -218,9 +297,14 @@ static void __init mpc85xx_cds_setup_arch(void)
 	}
 
 #ifdef CONFIG_PCI
-	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
-		mpc85xx_add_bridge(np);
-
+	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) {
+		struct resource rsrc;
+		of_address_to_resource(np, 0, &rsrc);
+		if ((rsrc.start & 0xfffff) == 0x8000)
+			fsl_add_bridge(np, 1);
+		else
+			fsl_add_bridge(np, 0);
+	}
 	ppc_md.pci_irq_fixup = mpc85xx_cds_pci_irq_fixup;
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
@@ -265,7 +349,12 @@ define_machine(mpc85xx_cds) {
 	.init_IRQ	= mpc85xx_cds_pic_init,
 	.show_cpuinfo	= mpc85xx_cds_show_cpuinfo,
 	.get_irq	= mpic_get_irq,
+#ifdef CONFIG_PCI
+	.restart	= mpc85xx_cds_restart,
+#else
 	.restart	= mpc85xx_restart,
+#endif
 	.calibrate_decr = generic_calibrate_decr,
 	.progress	= udbg_progress,
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 };
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 004b80bd0b8..e8003bf00c9 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -46,6 +46,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 #include <asm/mpic.h>
@@ -94,9 +95,8 @@ static void __init mpc85xx_mds_setup_arch(void)
 	}
 
 #ifdef CONFIG_PCI
-	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) {
-		mpc85xx_add_bridge(np);
-	}
+	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+		fsl_add_bridge(np, 1);
 	of_node_put(np);
 #endif
 
@@ -208,4 +208,5 @@ define_machine(mpc85xx_mds) {
 	.restart	= mpc85xx_restart,
 	.calibrate_decr	= generic_calibrate_decr,
 	.progress	= udbg_progress,
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 };
diff --git a/arch/powerpc/platforms/85xx/pci.c b/arch/powerpc/platforms/85xx/pci.c
deleted file mode 100644
index 8118417b736..00000000000
--- a/arch/powerpc/platforms/85xx/pci.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * FSL SoC setup code
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/prom.h>
-#include <sysdev/fsl_soc.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-#ifdef CONFIG_PCI
-int __init mpc85xx_add_bridge(struct device_node *dev)
-{
-	int len;
-	struct pci_controller *hose;
-	struct resource rsrc;
-	const int *bus_range;
-	int primary = 1, has_address = 0;
-	phys_addr_t immr = get_immrbase();
-
-	DBG("Adding PCI host bridge %s\n", dev->full_name);
-
-	/* Fetch host bridge registers address */
-	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
-
-	/* Get bus range if any */
-	bus_range = of_get_property(dev, "bus-range", &len);
-	if (bus_range == NULL || len < 2 * sizeof(int)) {
-		printk(KERN_WARNING "Can't get bus-range for %s, assume"
-		       " bus 0\n", dev->full_name);
-	}
-
-	pci_assign_all_buses = 1;
-	hose = pcibios_alloc_controller(dev);
-	if (!hose)
-		return -ENOMEM;
-
-	hose->first_busno = bus_range ? bus_range[0] : 0;
-	hose->last_busno = bus_range ? bus_range[1] : 0xff;
-
-	/* PCI 1 */
-	if ((rsrc.start & 0xfffff) == 0x8000) {
-		setup_indirect_pci(hose, immr + 0x8000, immr + 0x8004);
-	}
-	/* PCI 2 */
-	if ((rsrc.start & 0xfffff) == 0x9000) {
-		setup_indirect_pci(hose, immr + 0x9000, immr + 0x9004);
-		primary = 0;
-	}
-
-	printk(KERN_INFO "Found MPC85xx PCI host bridge at 0x%016llx. "
-	       "Firmware bus number: %d->%d\n",
-		(unsigned long long)rsrc.start, hose->first_busno,
-		hose->last_busno);
-
-	DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
-		hose, hose->cfg_addr, hose->cfg_data);
-
-	/* Interpret the "ranges" property */
-	/* This also maps the I/O region and sets isa_io/mem_base */
-	pci_process_bridge_OF_ranges(hose, dev, primary);
-
-	return 0;
-}
-
-#endif
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 0faebfdc159..343b76d0d79 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -14,8 +14,7 @@ endchoice
 
 config MPC8641
 	bool
-	select PPC_INDIRECT_PCI
-	select PPC_INDIRECT_PCI_BE
+	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
 	default y if MPC8641_HPCN
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 418fd8f4d26..3376c7767f2 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -4,4 +4,3 @@
 
 obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
-obj-$(CONFIG_PCI)		+= pci.o
diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h
index 23f7ed2a7f8..525ffa1904f 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx.h
+++ b/arch/powerpc/platforms/86xx/mpc86xx.h
@@ -15,11 +15,6 @@
  * mpc86xx_* files. Mostly for use by mpc86xx_setup().
  */
 
-extern int mpc86xx_add_bridge(struct device_node *dev);
-
-extern int mpc86xx_exclude_device(struct pci_controller *hose,
-				  u_char bus, u_char devfn);
-
 extern void __init mpc86xx_smp_init(void);
 
 #endif	/* __MPC86XX_H__ */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 5b01ec7c13d..e9eaa0749ae 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -31,6 +31,7 @@
 
 #include <asm/mpic.h>
 
+#include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
 
 #include "mpc86xx.h"
@@ -344,8 +345,14 @@ mpc86xx_hpcn_setup_arch(void)
 	}
 
 #ifdef CONFIG_PCI
-	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
-		mpc86xx_add_bridge(np);
+	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) {
+		struct resource rsrc;
+		of_address_to_resource(np, 0, &rsrc);
+		if ((rsrc.start & 0xfffff) == 0x8000)
+			fsl_add_bridge(np, 1);
+		else
+			fsl_add_bridge(np, 0);
+	}
 #endif
 
 	printk("MPC86xx HPCN board from Freescale Semiconductor\n");
@@ -424,7 +431,6 @@ mpc86xx_time_init(void)
 	return 0;
 }
 
-
 define_machine(mpc86xx_hpcn) {
 	.name			= "MPC86xx HPCN",
 	.probe			= mpc86xx_hpcn_probe,
@@ -436,4 +442,5 @@ define_machine(mpc86xx_hpcn) {
 	.time_init		= mpc86xx_time_init,
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 };
diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
deleted file mode 100644
index 73cd5b05a84..00000000000
--- a/arch/powerpc/platforms/86xx/pci.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * MPC86XX pci setup code
- *
- * Recode: ZHANG WEI <wei.zhang@freescale.com>
- * Initial author: Xianghua Xiao <x.xiao@freescale.com>
- *
- * Copyright 2006 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/serial.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pcie.h>
-
-#include "mpc86xx.h"
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
-#else
-#define DBG(fmt, args...)
-#endif
-
-struct pcie_outbound_window_regs {
-	uint    pexotar;               /* 0x.0 - PCI Express outbound translation address register */
-	uint    pexotear;              /* 0x.4 - PCI Express outbound translation extended address register */
-	uint    pexowbar;              /* 0x.8 - PCI Express outbound window base address register */
-	char    res1[4];
-	uint    pexowar;               /* 0x.10 - PCI Express outbound window attributes register */
-	char    res2[12];
-};
-
-struct pcie_inbound_window_regs {
-	uint    pexitar;               /* 0x.0 - PCI Express inbound translation address register */
-	char    res1[4];
-	uint    pexiwbar;              /* 0x.8 - PCI Express inbound window base address register */
-	uint    pexiwbear;             /* 0x.c - PCI Express inbound window base extended address register */
-	uint    pexiwar;               /* 0x.10 - PCI Express inbound window attributes register */
-	char    res2[12];
-};
-
-static void __init setup_pcie_atmu(struct pci_controller *hose, struct resource *rsrc)
-{
-	volatile struct ccsr_pex *pcie;
-	volatile struct pcie_outbound_window_regs *pcieow;
-	volatile struct pcie_inbound_window_regs *pcieiw;
-	int i = 0;
-
-	DBG("PCIE memory map start 0x%x, size 0x%x\n", rsrc->start,
-			rsrc->end - rsrc->start + 1);
-	pcie = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
-
-	/* Disable all windows (except pexowar0 since its ignored) */
-	pcie->pexowar1 = 0;
-	pcie->pexowar2 = 0;
- 	pcie->pexowar3 = 0;
- 	pcie->pexowar4 = 0;
- 	pcie->pexiwar1 = 0;
- 	pcie->pexiwar2 = 0;
- 	pcie->pexiwar3 = 0;
-
- 	pcieow = (struct pcie_outbound_window_regs *)&pcie->pexotar1;
- 	pcieiw = (struct pcie_inbound_window_regs *)&pcie->pexitar1;
-
- 	/* Setup outbound MEM window */
- 	for(i = 0; i < 3; i++)
- 		if (hose->mem_resources[i].flags & IORESOURCE_MEM){
- 			DBG("PCIE MEM resource start 0x%08x, size 0x%08x.\n",
- 				hose->mem_resources[i].start,
- 				hose->mem_resources[i].end
- 				  - hose->mem_resources[i].start + 1);
- 			pcieow->pexotar = (hose->mem_resources[i].start) >> 12
- 				& 0x000fffff;
- 			pcieow->pexotear = 0;
- 			pcieow->pexowbar = (hose->mem_resources[i].start) >> 12
- 				& 0x000fffff;
- 			/* Enable, Mem R/W */
- 			pcieow->pexowar = 0x80044000 |
- 				(__ilog2(hose->mem_resources[i].end
- 					 - hose->mem_resources[i].start + 1)
- 				 - 1);
- 			pcieow++;
- 		}
-
- 	/* Setup outbound IO window */
- 	if (hose->io_resource.flags & IORESOURCE_IO){
- 		DBG("PCIE IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n",
- 			hose->io_resource.start,
- 			hose->io_resource.end - hose->io_resource.start + 1,
- 			hose->io_base_phys);
- 		pcieow->pexotar = (hose->io_resource.start) >> 12 & 0x000fffff;
- 		pcieow->pexotear = 0;
- 		pcieow->pexowbar = (hose->io_base_phys) >> 12 & 0x000fffff;
- 		/* Enable, IO R/W */
- 		pcieow->pexowar = 0x80088000 | (__ilog2(hose->io_resource.end
- 					- hose->io_resource.start + 1) - 1);
- 	}
-
- 	/* Setup 2G inbound Memory Window @ 0 */
- 	pcieiw->pexitar = 0x00000000;
- 	pcieiw->pexiwbar = 0x00000000;
- 	/* Enable, Prefetch, Local Mem, Snoop R/W, 2G */
- 	pcieiw->pexiwar = 0xa0f5501e;
-}
-
-static void __init
-mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
-{
-	u16 cmd;
-
-	DBG("PCIE host controller register offset 0x%08x, size 0x%08x.\n",
-			pcie_offset, pcie_size);
-
-	early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
-	cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
-	    | PCI_COMMAND_IO;
-	early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
-
-	early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
-}
-
-static void __devinit quirk_fsl_pcie_transparent(struct pci_dev *dev)
-{
-	struct resource *res;
-	int i, res_idx = PCI_BRIDGE_RESOURCES;
-	struct pci_controller *hose;
-
-	/*
-	 * Make the bridge be transparent.
-	 */
-	dev->transparent = 1;
-
-	hose = pci_bus_to_host(dev->bus);
-	if (!hose) {
-		printk(KERN_ERR "Can't find hose for bus %d\n",
-		       dev->bus->number);
-		return;
-	}
-
-	if (hose->io_resource.flags) {
-		res = &dev->resource[res_idx++];
-		res->start = hose->io_resource.start;
-		res->end = hose->io_resource.end;
-		res->flags = hose->io_resource.flags;
-	}
-
-	for (i = 0; i < 3; i++) {
-		res = &dev->resource[res_idx + i];
-		res->start = hose->mem_resources[i].start;
-		res->end = hose->mem_resources[i].end;
-		res->flags = hose->mem_resources[i].flags;
-	}
-}
-
-
-DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7010, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7011, quirk_fsl_pcie_transparent);
-
-#define PCIE_LTSSM	0x404	/* PCIe Link Training and Status */
-#define PCIE_LTSSM_L0	0x16	/* L0 state */
-
-int __init mpc86xx_add_bridge(struct device_node *dev)
-{
-	int len;
-	struct pci_controller *hose;
-	struct resource rsrc;
-	const int *bus_range;
-	int has_address = 0;
-	int primary = 0;
-	u16 val;
-
-	DBG("Adding PCIE host bridge %s\n", dev->full_name);
-
-	/* Fetch host bridge registers address */
-	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
-
-	/* Get bus range if any */
-	bus_range = of_get_property(dev, "bus-range", &len);
-	if (bus_range == NULL || len < 2 * sizeof(int))
-		printk(KERN_WARNING "Can't get bus-range for %s, assume"
-		       " bus 0\n", dev->full_name);
-
-	pci_assign_all_buses = 1;
-	hose = pcibios_alloc_controller(dev);
-	if (!hose)
-		return -ENOMEM;
-
-	hose->indirect_type = PPC_INDIRECT_TYPE_EXT_REG |
-				PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
-
-	hose->first_busno = bus_range ? bus_range[0] : 0x0;
-	hose->last_busno = bus_range ? bus_range[1] : 0xff;
-
-	setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4);
-
-	/* Probe the hose link training status */
-	early_read_config_word(hose, 0, 0, PCIE_LTSSM, &val);
-	if (val < PCIE_LTSSM_L0)
-		return -ENXIO;
-
-	/* Setup the PCIE host controller. */
-	mpc86xx_setup_pcie(hose, rsrc.start, rsrc.end - rsrc.start + 1);
-
-	if ((rsrc.start & 0xfffff) == 0x8000)
-		primary = 1;
-
-	printk(KERN_INFO "Found MPC86xx PCIE host bridge at 0x%08lx. "
-	       "Firmware bus number: %d->%d\n",
-	       (unsigned long) rsrc.start,
-	       hose->first_busno, hose->last_busno);
-
-	DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
-		hose, hose->cfg_addr, hose->cfg_data);
-
-	/* Interpret the "ranges" property */
-	/* This also maps the I/O region and sets isa_io/mem_base */
-	pci_process_bridge_OF_ranges(hose, dev, primary);
-
-	/* Setup PEX window registers */
-	setup_pcie_atmu(hose, &rsrc);
-
-	return 0;
-}
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 3690624e49d..28d1647b204 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -181,7 +181,7 @@ setup_python(struct pci_controller *hose, struct device_node *dev)
 	}
 	iounmap(reg);
 
-	setup_indirect_pci(hose, r.start + 0xf8000, r.start + 0xf8010);
+	setup_indirect_pci(hose, r.start + 0xf8000, r.start + 0xf8010, 0);
 }
 
 /* Marvell Discovery II based Pegasos 2 */
@@ -277,13 +277,14 @@ chrp_find_bridges(void)
 			hose->cfg_data = p;
 			gg2_pci_config_base = p;
 		} else if (is_pegasos == 1) {
-			setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc);
+			setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc, 0);
 		} else if (is_pegasos == 2) {
 			setup_peg2(hose, dev);
 		} else if (!strncmp(model, "IBM,CPC710", 10)) {
 			setup_indirect_pci(hose,
 					   r.start + 0x000f8000,
-					   r.start + 0x000f8010);
+					   r.start + 0x000f8010,
+					   0);
 			if (index == 0) {
 				dma = of_get_property(dev, "system-dma-base",
 							&len);
diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index f4d0a7a603f..bd5ca58345a 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -73,7 +73,7 @@ static int __init linkstation_add_bridge(struct device_node *dev)
 		return -ENOMEM;
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
-	setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
+	setup_indirect_pci(hose, 0xfec00000, 0xfee00000, 0);
 
 	/* Interpret the "ranges" property */
 	/* This also maps the I/O region and sets isa_io/mem_base */