diff options
author | Li Yang <leoli@freescale.com> | 2006-10-03 23:10:46 -0500 |
---|---|---|
committer | Paul Mackerras <paulus@samba.org> | 2006-10-04 15:24:27 +1000 |
commit | 9865853851313e0d94a4acde42d6f9d8070bb376 (patch) | |
tree | 0f4cca2bda6d2a21b8beb02ec2883bf328f1935c /arch/powerpc/sysdev/qe_lib/ucc_fast.c | |
parent | 9a1ab883c04e43f9f9819c40eb435bcdc4136193 (diff) |
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/powerpc/sysdev/qe_lib/ucc_fast.c')
-rw-r--r-- | arch/powerpc/sysdev/qe_lib/ucc_fast.c | 396 |
1 files changed, 396 insertions, 0 deletions
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c new file mode 100644 index 00000000000..c2be7348fcb --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c @@ -0,0 +1,396 @@ +/* + * arch/powerpc/sysdev/qe_lib/ucc_fast.c + * + * QE UCC Fast API Set - UCC Fast specific routines implementations. + * + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/stddef.h> +#include <linux/interrupt.h> + +#include <asm/io.h> +#include <asm/immap_qe.h> +#include <asm/qe.h> + +#include <asm/ucc.h> +#include <asm/ucc_fast.h> + +#define uccf_printk(level, format, arg...) \ + printk(level format "\n", ## arg) + +#define uccf_dbg(format, arg...) \ + uccf_printk(KERN_DEBUG , format , ## arg) +#define uccf_err(format, arg...) \ + uccf_printk(KERN_ERR , format , ## arg) +#define uccf_info(format, arg...) \ + uccf_printk(KERN_INFO , format , ## arg) +#define uccf_warn(format, arg...) \ + uccf_printk(KERN_WARNING , format , ## arg) + +#ifdef UCCF_VERBOSE_DEBUG +#define uccf_vdbg uccf_dbg +#else +#define uccf_vdbg(fmt, args...) do { } while (0) +#endif /* UCCF_VERBOSE_DEBUG */ + +void ucc_fast_dump_regs(struct ucc_fast_private * uccf) +{ + uccf_info("UCC%d Fast registers:", uccf->uf_info->ucc_num); + uccf_info("Base address: 0x%08x", (u32) uccf->uf_regs); + + uccf_info("gumr : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr)); + uccf_info("upsmr : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr)); + uccf_info("utodr : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr)); + uccf_info("udsr : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr)); + uccf_info("ucce : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce)); + uccf_info("uccm : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm)); + uccf_info("uccs : addr - 0x%08x, val - 0x%02x", + (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs); + uccf_info("urfb : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb)); + uccf_info("urfs : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs)); + uccf_info("urfet : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet)); + uccf_info("urfset: addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->urfset, + in_be16(&uccf->uf_regs->urfset)); + uccf_info("utfb : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb)); + uccf_info("utfs : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs)); + uccf_info("utfet : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet)); + uccf_info("utftt : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt)); + uccf_info("utpt : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt)); + uccf_info("urtry : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry)); + uccf_info("guemr : addr - 0x%08x, val - 0x%02x", + (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr); +} + +u32 ucc_fast_get_qe_cr_subblock(int uccf_num) +{ + switch (uccf_num) { + case 0: return QE_CR_SUBBLOCK_UCCFAST1; + case 1: return QE_CR_SUBBLOCK_UCCFAST2; + case 2: return QE_CR_SUBBLOCK_UCCFAST3; + case 3: return QE_CR_SUBBLOCK_UCCFAST4; + case 4: return QE_CR_SUBBLOCK_UCCFAST5; + case 5: return QE_CR_SUBBLOCK_UCCFAST6; + case 6: return QE_CR_SUBBLOCK_UCCFAST7; + case 7: return QE_CR_SUBBLOCK_UCCFAST8; + default: return QE_CR_SUBBLOCK_INVALID; + } +} + +void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf) +{ + out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD); +} + +void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode) +{ + struct ucc_fast *uf_regs; + u32 gumr; + + uf_regs = uccf->uf_regs; + + /* Enable reception and/or transmission on this UCC. */ + gumr = in_be32(&uf_regs->gumr); + if (mode & COMM_DIR_TX) { + gumr |= UCC_FAST_GUMR_ENT; + uccf->enabled_tx = 1; + } + if (mode & COMM_DIR_RX) { + gumr |= UCC_FAST_GUMR_ENR; + uccf->enabled_rx = 1; + } + out_be32(&uf_regs->gumr, gumr); +} + +void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode) +{ + struct ucc_fast *uf_regs; + u32 gumr; + + uf_regs = uccf->uf_regs; + + /* Disable reception and/or transmission on this UCC. */ + gumr = in_be32(&uf_regs->gumr); + if (mode & COMM_DIR_TX) { + gumr &= ~UCC_FAST_GUMR_ENT; + uccf->enabled_tx = 0; + } + if (mode & COMM_DIR_RX) { + gumr &= ~UCC_FAST_GUMR_ENR; + uccf->enabled_rx = 0; + } + out_be32(&uf_regs->gumr, gumr); +} + +int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret) +{ + struct ucc_fast_private *uccf; + struct ucc_fast *uf_regs; + u32 gumr = 0; + int ret; + + uccf_vdbg("%s: IN", __FUNCTION__); + + if (!uf_info) + return -EINVAL; + + /* check if the UCC port number is in range. */ + if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { + uccf_err("ucc_fast_init: Illagal UCC number!"); + return -EINVAL; + } + + /* Check that 'max_rx_buf_length' is properly aligned (4). */ + if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) { + uccf_err("ucc_fast_init: max_rx_buf_length not aligned."); + return -EINVAL; + } + + /* Validate Virtual Fifo register values */ + if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) { + uccf_err + ("ucc_fast_init: Virtual Fifo register urfs too small."); + return -EINVAL; + } + + if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register urfs not aligned."); + return -EINVAL; + } + + if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register urfet not aligned."); + return -EINVAL; + } + + if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register urfset not aligned."); + return -EINVAL; + } + + if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register utfs not aligned."); + return -EINVAL; + } + + if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register utfet not aligned."); + return -EINVAL; + } + + if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register utftt not aligned."); + return -EINVAL; + } + + uccf = (struct ucc_fast_private *) + kmalloc(sizeof(struct ucc_fast_private), GFP_KERNEL); + if (!uccf) { + uccf_err + ("ucc_fast_init: No memory for UCC slow data structure!"); + return -ENOMEM; + } + memset(uccf, 0, sizeof(struct ucc_fast_private)); + + /* Fill fast UCC structure */ + uccf->uf_info = uf_info; + /* Set the PHY base address */ + uccf->uf_regs = + (struct ucc_fast *) ioremap(uf_info->regs, sizeof(struct ucc_fast)); + if (uccf->uf_regs == NULL) { + uccf_err + ("ucc_fast_init: No memory map for UCC slow controller!"); + return -ENOMEM; + } + + uccf->enabled_tx = 0; + uccf->enabled_rx = 0; + uccf->stopped_tx = 0; + uccf->stopped_rx = 0; + uf_regs = uccf->uf_regs; + uccf->p_ucce = (u32 *) & (uf_regs->ucce); + uccf->p_uccm = (u32 *) & (uf_regs->uccm); +#ifdef STATISTICS + uccf->tx_frames = 0; + uccf->rx_frames = 0; + uccf->rx_discarded = 0; +#endif /* STATISTICS */ + + /* Init Guemr register */ + if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) { + uccf_err("ucc_fast_init: Could not init the guemr register."); + ucc_fast_free(uccf); + return ret; + } + + /* Set UCC to fast type */ + if ((ret = ucc_set_type(uf_info->ucc_num, + (struct ucc_common *) (uf_regs), + UCC_SPEED_TYPE_FAST))) { + uccf_err("ucc_fast_init: Could not set type to fast."); + ucc_fast_free(uccf); + return ret; + } + + uccf->mrblr = uf_info->max_rx_buf_length; + + /* Set GUMR */ + /* For more details see the hardware spec. */ + /* gumr starts as zero. */ + if (uf_info->tci) + gumr |= UCC_FAST_GUMR_TCI; + gumr |= uf_info->ttx_trx; + if (uf_info->cdp) + gumr |= UCC_FAST_GUMR_CDP; + if (uf_info->ctsp) + gumr |= UCC_FAST_GUMR_CTSP; + if (uf_info->cds) + gumr |= UCC_FAST_GUMR_CDS; + if (uf_info->ctss) + gumr |= UCC_FAST_GUMR_CTSS; + if (uf_info->txsy) + gumr |= UCC_FAST_GUMR_TXSY; + if (uf_info->rsyn) + gumr |= UCC_FAST_GUMR_RSYN; + gumr |= uf_info->synl; + if (uf_info->rtsm) + gumr |= UCC_FAST_GUMR_RTSM; + gumr |= uf_info->renc; + if (uf_info->revd) + gumr |= UCC_FAST_GUMR_REVD; + gumr |= uf_info->tenc; + gumr |= uf_info->tcrc; + gumr |= uf_info->mode; + out_be32(&uf_regs->gumr, gumr); + + /* Allocate memory for Tx Virtual Fifo */ + uccf->ucc_fast_tx_virtual_fifo_base_offset = + qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); + if (IS_MURAM_ERR(uccf->ucc_fast_tx_virtual_fifo_base_offset)) { + uccf_err + ("ucc_fast_init: Can not allocate MURAM memory for " + "struct ucc_fastx_virtual_fifo_base_offset."); + uccf->ucc_fast_tx_virtual_fifo_base_offset = 0; + ucc_fast_free(uccf); + return -ENOMEM; + } + + /* Allocate memory for Rx Virtual Fifo */ + uccf->ucc_fast_rx_virtual_fifo_base_offset = + qe_muram_alloc(uf_info->urfs + + (u32) + UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR, + UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); + if (IS_MURAM_ERR(uccf->ucc_fast_rx_virtual_fifo_base_offset)) { + uccf_err + ("ucc_fast_init: Can not allocate MURAM memory for " + "ucc_fast_rx_virtual_fifo_base_offset."); + uccf->ucc_fast_rx_virtual_fifo_base_offset = 0; + ucc_fast_free(uccf); + return -ENOMEM; + } + + /* Set Virtual Fifo registers */ + out_be16(&uf_regs->urfs, uf_info->urfs); + out_be16(&uf_regs->urfet, uf_info->urfet); + out_be16(&uf_regs->urfset, uf_info->urfset); + out_be16(&uf_regs->utfs, uf_info->utfs); + out_be16(&uf_regs->utfet, uf_info->utfet); + out_be16(&uf_regs->utftt, uf_info->utftt); + /* utfb, urfb are offsets from MURAM base */ + out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset); + out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset); + + /* Mux clocking */ + /* Grant Support */ + ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support); + /* Breakpoint Support */ + ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support); + /* Set Tsa or NMSI mode. */ + ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa); + /* If NMSI (not Tsa), set Tx and Rx clock. */ + if (!uf_info->tsa) { + /* Rx clock routing */ + if (uf_info->rx_clock != QE_CLK_NONE) { + if (ucc_set_qe_mux_rxtx + (uf_info->ucc_num, uf_info->rx_clock, + COMM_DIR_RX)) { + uccf_err + ("ucc_fast_init: Illegal value for parameter 'RxClock'."); + ucc_fast_free(uccf); + return -EINVAL; + } + } + /* Tx clock routing */ + if (uf_info->tx_clock != QE_CLK_NONE) { + if (ucc_set_qe_mux_rxtx + (uf_info->ucc_num, uf_info->tx_clock, + COMM_DIR_TX)) { + uccf_err + ("ucc_fast_init: Illegal value for parameter 'TxClock'."); + ucc_fast_free(uccf); + return -EINVAL; + } + } + } + + /* Set interrupt mask register at UCC level. */ + out_be32(&uf_regs->uccm, uf_info->uccm_mask); + + /* First, clear anything pending at UCC level, + * otherwise, old garbage may come through + * as soon as the dam is opened + * Writing '1' clears + */ + out_be32(&uf_regs->ucce, 0xffffffff); + + *uccf_ret = uccf; + return 0; +} + +void ucc_fast_free(struct ucc_fast_private * uccf) +{ + if (!uccf) + return; + + if (uccf->ucc_fast_tx_virtual_fifo_base_offset) + qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset); + + if (uccf->ucc_fast_rx_virtual_fifo_base_offset) + qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset); + + kfree(uccf); +} |