Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

45 files changed, 22654 insertions, 0 deletions

diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
new file mode 100644
index 00000000000..86bc878cb3e
--- /dev/null
+++ b/arch/ppc/kernel/Makefile
@@ -0,0 +1,33 @@
+#
+# Makefile for the linux kernel.
+#
+
+extra-$(CONFIG_PPC_STD_MMU)	:= head.o
+extra-$(CONFIG_40x)		:= head_4xx.o
+extra-$(CONFIG_44x)		:= head_44x.o
+extra-$(CONFIG_FSL_BOOKE)	:= head_fsl_booke.o
+extra-$(CONFIG_8xx)		:= head_8xx.o
+extra-$(CONFIG_6xx)		+= idle_6xx.o
+extra-$(CONFIG_POWER4)		+= idle_power4.o
+extra-y				+= vmlinux.lds
+
+obj-y				:= entry.o traps.o irq.o idle.o time.o misc.o \
+					process.o signal.o ptrace.o align.o \
+					semaphore.o syscalls.o setup.o \
+					cputable.o ppc_htab.o perfmon.o
+obj-$(CONFIG_6xx)		+= l2cr.o cpu_setup_6xx.o
+obj-$(CONFIG_SOFTWARE_SUSPEND)	+= swsusp.o
+obj-$(CONFIG_POWER4)		+= cpu_setup_power4.o
+obj-$(CONFIG_MODULES)		+= module.o ppc_ksyms.o
+obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-mapping.o
+obj-$(CONFIG_PCI)		+= pci.o
+obj-$(CONFIG_KGDB)		+= ppc-stub.o
+obj-$(CONFIG_SMP)		+= smp.o smp-tbsync.o
+obj-$(CONFIG_TAU)		+= temp.o
+obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
+obj-$(CONFIG_FSL_BOOKE)		+= perfmon_fsl_booke.o
+
+ifndef CONFIG_MATH_EMULATION
+obj-$(CONFIG_8xx)		+= softemu8xx.o
+endif
+
diff --git a/arch/ppc/kernel/align.c b/arch/ppc/kernel/align.c
new file mode 100644
index 00000000000..79c92947503
--- /dev/null
+++ b/arch/ppc/kernel/align.c
@@ -0,0 +1,398 @@
+/*
+ * align.c - handle alignment exceptions for the Power PC.
+ *
+ * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ * Copyright (c) 1998-1999 TiVo, Inc.
+ *   PowerPC 403GCX modifications.
+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *   PowerPC 403GCX/405GP modifications.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/cache.h>
+
+struct aligninfo {
+	unsigned char len;
+	unsigned char flags;
+};
+
+#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
+#define	OPCD(inst)	(((inst) & 0xFC000000) >> 26)
+#define	RS(inst)	(((inst) & 0x03E00000) >> 21)
+#define	RA(inst)	(((inst) & 0x001F0000) >> 16)
+#define	IS_XFORM(code)	((code) == 31)
+#endif
+
+#define INVALID	{ 0, 0 }
+
+#define LD	1	/* load */
+#define ST	2	/* store */
+#define	SE	4	/* sign-extend value */
+#define F	8	/* to/from fp regs */
+#define U	0x10	/* update index register */
+#define M	0x20	/* multiple load/store */
+#define S	0x40	/* single-precision fp, or byte-swap value */
+#define SX	0x40	/* byte count in XER */
+#define HARD	0x80	/* string, stwcx. */
+
+#define DCBZ	0x5f	/* 8xx/82xx dcbz faults when cache not enabled */
+
+/*
+ * The PowerPC stores certain bits of the instruction that caused the
+ * alignment exception in the DSISR register.  This array maps those
+ * bits to information about the operand length and what the
+ * instruction would do.
+ */
+static struct aligninfo aligninfo[128] = {
+	{ 4, LD },		/* 00 0 0000: lwz / lwarx */
+	INVALID,		/* 00 0 0001 */
+	{ 4, ST },		/* 00 0 0010: stw */
+	INVALID,		/* 00 0 0011 */
+	{ 2, LD },		/* 00 0 0100: lhz */
+	{ 2, LD+SE },		/* 00 0 0101: lha */
+	{ 2, ST },		/* 00 0 0110: sth */
+	{ 4, LD+M },		/* 00 0 0111: lmw */
+	{ 4, LD+F+S },		/* 00 0 1000: lfs */
+	{ 8, LD+F },		/* 00 0 1001: lfd */
+	{ 4, ST+F+S },		/* 00 0 1010: stfs */
+	{ 8, ST+F },		/* 00 0 1011: stfd */
+	INVALID,		/* 00 0 1100 */
+	INVALID,		/* 00 0 1101: ld/ldu/lwa */
+	INVALID,		/* 00 0 1110 */
+	INVALID,		/* 00 0 1111: std/stdu */
+	{ 4, LD+U },		/* 00 1 0000: lwzu */
+	INVALID,		/* 00 1 0001 */
+	{ 4, ST+U },		/* 00 1 0010: stwu */
+	INVALID,		/* 00 1 0011 */
+	{ 2, LD+U },		/* 00 1 0100: lhzu */
+	{ 2, LD+SE+U },		/* 00 1 0101: lhau */
+	{ 2, ST+U },		/* 00 1 0110: sthu */
+	{ 4, ST+M },		/* 00 1 0111: stmw */
+	{ 4, LD+F+S+U },	/* 00 1 1000: lfsu */
+	{ 8, LD+F+U },		/* 00 1 1001: lfdu */
+	{ 4, ST+F+S+U },	/* 00 1 1010: stfsu */
+	{ 8, ST+F+U },		/* 00 1 1011: stfdu */
+	INVALID,		/* 00 1 1100 */
+	INVALID,		/* 00 1 1101 */
+	INVALID,		/* 00 1 1110 */
+	INVALID,		/* 00 1 1111 */
+	INVALID,		/* 01 0 0000: ldx */
+	INVALID,		/* 01 0 0001 */
+	INVALID,		/* 01 0 0010: stdx */
+	INVALID,		/* 01 0 0011 */
+	INVALID,		/* 01 0 0100 */
+	INVALID,		/* 01 0 0101: lwax */
+	INVALID,		/* 01 0 0110 */
+	INVALID,		/* 01 0 0111 */
+	{ 4, LD+M+HARD+SX },	/* 01 0 1000: lswx */
+	{ 4, LD+M+HARD },	/* 01 0 1001: lswi */
+	{ 4, ST+M+HARD+SX },	/* 01 0 1010: stswx */
+	{ 4, ST+M+HARD },	/* 01 0 1011: stswi */
+	INVALID,		/* 01 0 1100 */
+	INVALID,		/* 01 0 1101 */
+	INVALID,		/* 01 0 1110 */
+	INVALID,		/* 01 0 1111 */
+	INVALID,		/* 01 1 0000: ldux */
+	INVALID,		/* 01 1 0001 */
+	INVALID,		/* 01 1 0010: stdux */
+	INVALID,		/* 01 1 0011 */
+	INVALID,		/* 01 1 0100 */
+	INVALID,		/* 01 1 0101: lwaux */
+	INVALID,		/* 01 1 0110 */
+	INVALID,		/* 01 1 0111 */
+	INVALID,		/* 01 1 1000 */
+	INVALID,		/* 01 1 1001 */
+	INVALID,		/* 01 1 1010 */
+	INVALID,		/* 01 1 1011 */
+	INVALID,		/* 01 1 1100 */
+	INVALID,		/* 01 1 1101 */
+	INVALID,		/* 01 1 1110 */
+	INVALID,		/* 01 1 1111 */
+	INVALID,		/* 10 0 0000 */
+	INVALID,		/* 10 0 0001 */
+	{ 0, ST+HARD },		/* 10 0 0010: stwcx. */
+	INVALID,		/* 10 0 0011 */
+	INVALID,		/* 10 0 0100 */
+	INVALID,		/* 10 0 0101 */
+	INVALID,		/* 10 0 0110 */
+	INVALID,		/* 10 0 0111 */
+	{ 4, LD+S },		/* 10 0 1000: lwbrx */
+	INVALID,		/* 10 0 1001 */
+	{ 4, ST+S },		/* 10 0 1010: stwbrx */
+	INVALID,		/* 10 0 1011 */
+	{ 2, LD+S },		/* 10 0 1100: lhbrx */
+	INVALID,		/* 10 0 1101 */
+	{ 2, ST+S },		/* 10 0 1110: sthbrx */
+	INVALID,		/* 10 0 1111 */
+	INVALID,		/* 10 1 0000 */
+	INVALID,		/* 10 1 0001 */
+	INVALID,		/* 10 1 0010 */
+	INVALID,		/* 10 1 0011 */
+	INVALID,		/* 10 1 0100 */
+	INVALID,		/* 10 1 0101 */
+	INVALID,		/* 10 1 0110 */
+	INVALID,		/* 10 1 0111 */
+	INVALID,		/* 10 1 1000 */
+	INVALID,		/* 10 1 1001 */
+	INVALID,		/* 10 1 1010 */
+	INVALID,		/* 10 1 1011 */
+	INVALID,		/* 10 1 1100 */
+	INVALID,		/* 10 1 1101 */
+	INVALID,		/* 10 1 1110 */
+	{ 0, ST+HARD },		/* 10 1 1111: dcbz */
+	{ 4, LD },		/* 11 0 0000: lwzx */
+	INVALID,		/* 11 0 0001 */
+	{ 4, ST },		/* 11 0 0010: stwx */
+	INVALID,		/* 11 0 0011 */
+	{ 2, LD },		/* 11 0 0100: lhzx */
+	{ 2, LD+SE },		/* 11 0 0101: lhax */
+	{ 2, ST },		/* 11 0 0110: sthx */
+	INVALID,		/* 11 0 0111 */
+	{ 4, LD+F+S },		/* 11 0 1000: lfsx */
+	{ 8, LD+F },		/* 11 0 1001: lfdx */
+	{ 4, ST+F+S },		/* 11 0 1010: stfsx */
+	{ 8, ST+F },		/* 11 0 1011: stfdx */
+	INVALID,		/* 11 0 1100 */
+	INVALID,		/* 11 0 1101: lmd */
+	INVALID,		/* 11 0 1110 */
+	INVALID,		/* 11 0 1111: stmd */
+	{ 4, LD+U },		/* 11 1 0000: lwzux */
+	INVALID,		/* 11 1 0001 */
+	{ 4, ST+U },		/* 11 1 0010: stwux */
+	INVALID,		/* 11 1 0011 */
+	{ 2, LD+U },		/* 11 1 0100: lhzux */
+	{ 2, LD+SE+U },		/* 11 1 0101: lhaux */
+	{ 2, ST+U },		/* 11 1 0110: sthux */
+	INVALID,		/* 11 1 0111 */
+	{ 4, LD+F+S+U },	/* 11 1 1000: lfsux */
+	{ 8, LD+F+U },		/* 11 1 1001: lfdux */
+	{ 4, ST+F+S+U },	/* 11 1 1010: stfsux */
+	{ 8, ST+F+U },		/* 11 1 1011: stfdux */
+	INVALID,		/* 11 1 1100 */
+	INVALID,		/* 11 1 1101 */
+	INVALID,		/* 11 1 1110 */
+	INVALID,		/* 11 1 1111 */
+};
+
+#define SWAP(a, b)	(t = (a), (a) = (b), (b) = t)
+
+int
+fix_alignment(struct pt_regs *regs)
+{
+	int instr, nb, flags;
+#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
+	int opcode, f1, f2, f3;
+#endif
+	int i, t;
+	int reg, areg;
+	int offset, nb0;
+	unsigned char __user *addr;
+	unsigned char *rptr;
+	union {
+		long l;
+		float f;
+		double d;
+		unsigned char v[8];
+	} data;
+
+	CHECK_FULL_REGS(regs);
+
+#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
+	/* The 4xx-family & Book-E processors have no DSISR register,
+	 * so we emulate it.
+	 * The POWER4 has a DSISR register but doesn't set it on
+	 * an alignment fault.  -- paulus
+	 */
+
+	if (__get_user(instr, (unsigned int __user *) regs->nip))
+		return 0;
+	opcode = OPCD(instr);
+	reg = RS(instr);
+	areg = RA(instr);
+
+	if (!IS_XFORM(opcode)) {
+		f1 = 0;
+		f2 = (instr & 0x04000000) >> 26;
+		f3 = (instr & 0x78000000) >> 27;
+	} else {
+		f1 = (instr & 0x00000006) >> 1;
+		f2 = (instr & 0x00000040) >> 6;
+		f3 = (instr & 0x00000780) >> 7;
+	}
+
+	instr = ((f1 << 5) | (f2 << 4) | f3);
+#else
+	reg = (regs->dsisr >> 5) & 0x1f;	/* source/dest register */
+	areg = regs->dsisr & 0x1f;		/* register to update */
+	instr = (regs->dsisr >> 10) & 0x7f;
+#endif
+
+	nb = aligninfo[instr].len;
+	if (nb == 0) {
+		long __user *p;
+		int i;
+
+		if (instr != DCBZ)
+			return 0;	/* too hard or invalid instruction */
+		/*
+		 * The dcbz (data cache block zero) instruction
+		 * gives an alignment fault if used on non-cacheable
+		 * memory.  We handle the fault mainly for the
+		 * case when we are running with the cache disabled
+		 * for debugging.
+		 */
+		p = (long __user *) (regs->dar & -L1_CACHE_BYTES);
+		if (user_mode(regs)
+		    && !access_ok(VERIFY_WRITE, p, L1_CACHE_BYTES))
+			return -EFAULT;
+		for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)
+			if (__put_user(0, p+i))
+				return -EFAULT;
+		return 1;
+	}
+
+	flags = aligninfo[instr].flags;
+	if ((flags & (LD|ST)) == 0)
+		return 0;
+
+	/* For the 4xx-family & Book-E processors, the 'dar' field of the
+	 * pt_regs structure is overloaded and is really from the DEAR.
+	 */
+
+	addr = (unsigned char __user *)regs->dar;
+
+	if (flags & M) {
+		/* lmw, stmw, lswi/x, stswi/x */
+		nb0 = 0;
+		if (flags & HARD) {
+			if (flags & SX) {
+				nb = regs->xer & 127;
+				if (nb == 0)
+					return 1;
+			} else {
+				if (__get_user(instr,
+					    (unsigned int __user *)regs->nip))
+					return 0;
+				nb = (instr >> 11) & 0x1f;
+				if (nb == 0)
+					nb = 32;
+			}
+			if (nb + reg * 4 > 128) {
+				nb0 = nb + reg * 4 - 128;
+				nb = 128 - reg * 4;
+			}
+		} else {
+			/* lwm, stmw */
+			nb = (32 - reg) * 4;
+		}
+		rptr = (unsigned char *) &regs->gpr[reg];
+		if (flags & LD) {
+			for (i = 0; i < nb; ++i)
+				if (__get_user(rptr[i], addr+i))
+					return -EFAULT;
+			if (nb0 > 0) {
+				rptr = (unsigned char *) &regs->gpr[0];
+				addr += nb;
+				for (i = 0; i < nb0; ++i)
+					if (__get_user(rptr[i], addr+i))
+						return -EFAULT;
+			}
+			for (; (i & 3) != 0; ++i)
+				rptr[i] = 0;
+		} else {
+			for (i = 0; i < nb; ++i)
+				if (__put_user(rptr[i], addr+i))
+					return -EFAULT;
+			if (nb0 > 0) {
+				rptr = (unsigned char *) &regs->gpr[0];
+				addr += nb;
+				for (i = 0; i < nb0; ++i)
+					if (__put_user(rptr[i], addr+i))
+						return -EFAULT;
+			}
+		}
+		return 1;
+	}
+
+	offset = 0;
+	if (nb < 4) {
+		/* read/write the least significant bits */
+		data.l = 0;
+		offset = 4 - nb;
+	}
+
+	/* Verify the address of the operand */
+	if (user_mode(regs)) {
+		if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))
+			return -EFAULT;	/* bad address */
+	}
+
+	if (flags & F) {
+		preempt_disable();
+		if (regs->msr & MSR_FP)
+			giveup_fpu(current);
+		preempt_enable();
+	}
+
+	/* If we read the operand, copy it in, else get register values */
+	if (flags & LD) {
+		for (i = 0; i < nb; ++i)
+			if (__get_user(data.v[offset+i], addr+i))
+				return -EFAULT;
+	} else if (flags & F) {
+		data.d = current->thread.fpr[reg];
+	} else {
+		data.l = regs->gpr[reg];
+	}
+
+	switch (flags & ~U) {
+	case LD+SE:	/* sign extend */
+		if (data.v[2] >= 0x80)
+			data.v[0] = data.v[1] = -1;
+		break;
+
+	case LD+S:	/* byte-swap */
+	case ST+S:
+		if (nb == 2) {
+			SWAP(data.v[2], data.v[3]);
+		} else {
+			SWAP(data.v[0], data.v[3]);
+			SWAP(data.v[1], data.v[2]);
+		}
+		break;
+
+	/* Single-precision FP load and store require conversions... */
+	case LD+F+S:
+		preempt_disable();
+		enable_kernel_fp();
+		cvt_fd(&data.f, &data.d, &current->thread.fpscr);
+		preempt_enable();
+		break;
+	case ST+F+S:
+		preempt_disable();
+		enable_kernel_fp();
+		cvt_df(&data.d, &data.f, &current->thread.fpscr);
+		preempt_enable();
+		break;
+	}
+
+	if (flags & ST) {
+		for (i = 0; i < nb; ++i)
+			if (__put_user(data.v[offset+i], addr+i))
+				return -EFAULT;
+	} else if (flags & F) {
+		current->thread.fpr[reg] = data.d;
+	} else {
+		regs->gpr[reg] = data.l;
+	}
+
+	if (flags & U)
+		regs->gpr[areg] = regs->dar;
+
+	return 1;
+}
diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c
new file mode 100644
index 00000000000..d9ad1d776d0
--- /dev/null
+++ b/arch/ppc/kernel/asm-offsets.c
@@ -0,0 +1,146 @@
+/*
+ * This program is used to generate definitions needed by
+ * assembly language modules.
+ *
+ * We use the technique used in the OSF Mach kernel code:
+ * generate asm statements containing #defines,
+ * compile this file to assembler, and then extract the
+ * #defines from the assembly-language output.
+ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/suspend.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+
+#define DEFINE(sym, val) \
+	asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->" : : )
+
+int
+main(void)
+{
+	DEFINE(THREAD, offsetof(struct task_struct, thread));
+	DEFINE(THREAD_INFO, offsetof(struct task_struct, thread_info));
+	DEFINE(MM, offsetof(struct task_struct, mm));
+	DEFINE(PTRACE, offsetof(struct task_struct, ptrace));
+	DEFINE(KSP, offsetof(struct thread_struct, ksp));
+	DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
+	DEFINE(LAST_SYSCALL, offsetof(struct thread_struct, last_syscall));
+	DEFINE(PT_REGS, offsetof(struct thread_struct, regs));
+	DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode));
+	DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0]));
+	DEFINE(THREAD_FPSCR, offsetof(struct thread_struct, fpscr));
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+	DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
+	DEFINE(PT_PTRACED, PT_PTRACED);
+#endif
+#ifdef CONFIG_ALTIVEC
+	DEFINE(THREAD_VR0, offsetof(struct thread_struct, vr[0]));
+	DEFINE(THREAD_VRSAVE, offsetof(struct thread_struct, vrsave));
+	DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr));
+	DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+	DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0]));
+	DEFINE(THREAD_ACC, offsetof(struct thread_struct, acc));
+	DEFINE(THREAD_SPEFSCR, offsetof(struct thread_struct, spefscr));
+	DEFINE(THREAD_USED_SPE, offsetof(struct thread_struct, used_spe));
+#endif /* CONFIG_SPE */
+	/* Interrupt register frame */
+	DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);
+	DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
+	/* in fact we only use gpr0 - gpr9 and gpr20 - gpr23 */
+	DEFINE(GPR0, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[0]));
+	DEFINE(GPR1, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[1]));
+	DEFINE(GPR2, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[2]));
+	DEFINE(GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[3]));
+	DEFINE(GPR4, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[4]));
+	DEFINE(GPR5, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[5]));
+	DEFINE(GPR6, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[6]));
+	DEFINE(GPR7, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[7]));
+	DEFINE(GPR8, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[8]));
+	DEFINE(GPR9, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[9]));
+	DEFINE(GPR10, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[10]));
+	DEFINE(GPR11, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[11]));
+	DEFINE(GPR12, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[12]));
+	DEFINE(GPR13, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[13]));
+	DEFINE(GPR14, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[14]));
+	DEFINE(GPR15, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[15]));
+	DEFINE(GPR16, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[16]));
+	DEFINE(GPR17, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[17]));
+	DEFINE(GPR18, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[18]));
+	DEFINE(GPR19, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[19]));
+	DEFINE(GPR20, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[20]));
+	DEFINE(GPR21, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[21]));
+	DEFINE(GPR22, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[22]));
+	DEFINE(GPR23, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[23]));
+	DEFINE(GPR24, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[24]));
+	DEFINE(GPR25, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[25]));
+	DEFINE(GPR26, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[26]));
+	DEFINE(GPR27, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[27]));
+	DEFINE(GPR28, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[28]));
+	DEFINE(GPR29, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[29]));
+	DEFINE(GPR30, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[30]));
+	DEFINE(GPR31, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[31]));
+	/* Note: these symbols include _ because they overlap with special
+	 * register names
+	 */
+	DEFINE(_NIP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, nip));
+	DEFINE(_MSR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, msr));
+	DEFINE(_CTR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ctr));
+	DEFINE(_LINK, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, link));
+	DEFINE(_CCR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ccr));
+	DEFINE(_MQ, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, mq));
+	DEFINE(_XER, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, xer));
+	DEFINE(_DAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar));
+	DEFINE(_DSISR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr));
+	/* The PowerPC 400-class & Book-E processors have neither the DAR nor the DSISR
+	 * SPRs. Hence, we overload them to hold the similar DEAR and ESR SPRs
+	 * for such processors.  For critical interrupts we use them to
+	 * hold SRR0 and SRR1.
+	 */
+	DEFINE(_DEAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar));
+	DEFINE(_ESR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr));
+	DEFINE(ORIG_GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, orig_gpr3));
+	DEFINE(RESULT, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, result));
+	DEFINE(TRAP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, trap));
+	DEFINE(CLONE_VM, CLONE_VM);
+	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
+	DEFINE(MM_PGD, offsetof(struct mm_struct, pgd));
+
+	/* About the CPU features table */
+	DEFINE(CPU_SPEC_ENTRY_SIZE, sizeof(struct cpu_spec));
+	DEFINE(CPU_SPEC_PVR_MASK, offsetof(struct cpu_spec, pvr_mask));
+	DEFINE(CPU_SPEC_PVR_VALUE, offsetof(struct cpu_spec, pvr_value));
+	DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
+	DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
+
+	DEFINE(TI_TASK, offsetof(struct thread_info, task));
+	DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
+	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+	DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
+	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
+	DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
+
+	DEFINE(pbe_address, offsetof(struct pbe, address));
+	DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address));
+	DEFINE(pbe_next, offsetof(struct pbe, next));
+
+	DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28);
+	return 0;
+}
diff --git a/arch/ppc/kernel/bitops.c b/arch/ppc/kernel/bitops.c
new file mode 100644
index 00000000000..7f53d193968
--- /dev/null
+++ b/arch/ppc/kernel/bitops.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+
+/*
+ * If the bitops are not inlined in bitops.h, they are defined here.
+ *  -- paulus
+ */
+#if !__INLINE_BITOPS
+void set_bit(int nr, volatile void * addr)
+{
+	unsigned long old;
+	unsigned long mask = 1 << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+	
+	__asm__ __volatile__(SMP_WMB "\n\
+1:	lwarx	%0,0,%3 \n\
+	or	%0,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%0,0,%3 \n\
+	bne	1b"
+	SMP_MB
+	: "=&r" (old), "=m" (*p)
+	: "r" (mask), "r" (p), "m" (*p)
+	: "cc" );
+}
+
+void clear_bit(int nr, volatile void *addr)
+{
+	unsigned long old;
+	unsigned long mask = 1 << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+	__asm__ __volatile__(SMP_WMB "\n\
+1:	lwarx	%0,0,%3 \n\
+	andc	%0,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%0,0,%3 \n\
+	bne	1b"
+	SMP_MB
+	: "=&r" (old), "=m" (*p)
+	: "r" (mask), "r" (p), "m" (*p)
+	: "cc");
+}
+
+void change_bit(int nr, volatile void *addr)
+{
+	unsigned long old;
+	unsigned long mask = 1 << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+	__asm__ __volatile__(SMP_WMB "\n\
+1:	lwarx	%0,0,%3 \n\
+	xor	%0,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%0,0,%3 \n\
+	bne	1b"
+	SMP_MB
+	: "=&r" (old), "=m" (*p)
+	: "r" (mask), "r" (p), "m" (*p)
+	: "cc");
+}
+
+int test_and_set_bit(int nr, volatile void *addr)
+{
+	unsigned int old, t;
+	unsigned int mask = 1 << (nr & 0x1f);
+	volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
+
+	__asm__ __volatile__(SMP_WMB "\n\
+1:	lwarx	%0,0,%4 \n\
+	or	%1,%0,%3 \n"
+	PPC405_ERR77(0,%4)
+"	stwcx.	%1,0,%4 \n\
+	bne	1b"
+	SMP_MB
+	: "=&r" (old), "=&r" (t), "=m" (*p)
+	: "r" (mask), "r" (p), "m" (*p)
+	: "cc");
+
+	return (old & mask) != 0;
+}
+
+int test_and_clear_bit(int nr, volatile void *addr)
+{
+	unsigned int old, t;
+	unsigned int mask = 1 << (nr & 0x1f);
+	volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
+
+	__asm__ __volatile__(SMP_WMB "\n\
+1:	lwarx	%0,0,%4 \n\
+	andc	%1,%0,%3 \n"
+	PPC405_ERR77(0,%4)
+"	stwcx.	%1,0,%4 \n\
+	bne	1b"
+	SMP_MB
+	: "=&r" (old), "=&r" (t), "=m" (*p)
+	: "r" (mask), "r" (p), "m" (*p)
+	: "cc");
+
+	return (old & mask) != 0;
+}
+
+int test_and_change_bit(int nr, volatile void *addr)
+{
+	unsigned int old, t;
+	unsigned int mask = 1 << (nr & 0x1f);
+	volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
+
+	__asm__ __volatile__(SMP_WMB "\n\
+1:	lwarx	%0,0,%4 \n\
+	xor	%1,%0,%3 \n"
+	PPC405_ERR77(0,%4)
+"	stwcx.	%1,0,%4 \n\
+	bne	1b"
+	SMP_MB
+	: "=&r" (old), "=&r" (t), "=m" (*p)
+	: "r" (mask), "r" (p), "m" (*p)
+	: "cc");
+
+	return (old & mask) != 0;
+}
+#endif /* !__INLINE_BITOPS */
diff --git a/arch/ppc/kernel/cpu_setup_6xx.S b/arch/ppc/kernel/cpu_setup_6xx.S
new file mode 100644
index 00000000000..74f781b486a
--- /dev/null
+++ b/arch/ppc/kernel/cpu_setup_6xx.S
@@ -0,0 +1,440 @@
+/*
+ * This file contains low level CPU setup functions.
+ *    Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/offsets.h>
+#include <asm/cache.h>
+
+_GLOBAL(__setup_cpu_601)
+	blr
+_GLOBAL(__setup_cpu_603)
+	b	setup_common_caches
+_GLOBAL(__setup_cpu_604)
+	mflr	r4
+	bl	setup_common_caches
+	bl	setup_604_hid0
+	mtlr	r4
+	blr
+_GLOBAL(__setup_cpu_750)
+	mflr	r4
+	bl	setup_common_caches
+	bl	setup_750_7400_hid0
+	mtlr	r4
+	blr
+_GLOBAL(__setup_cpu_750cx)
+	mflr	r4
+	bl	setup_common_caches
+	bl	setup_750_7400_hid0
+	bl	setup_750cx
+	mtlr	r4
+	blr
+_GLOBAL(__setup_cpu_750fx)
+	mflr	r4
+	bl	setup_common_caches
+	bl	setup_750_7400_hid0
+	bl	setup_750fx
+	mtlr	r4
+	blr
+_GLOBAL(__setup_cpu_7400)
+	mflr	r4
+	bl	setup_7400_workarounds
+	bl	setup_common_caches
+	bl	setup_750_7400_hid0
+	mtlr	r4
+	blr
+_GLOBAL(__setup_cpu_7410)
+	mflr	r4
+	bl	setup_7410_workarounds
+	bl	setup_common_caches
+	bl	setup_750_7400_hid0
+	li	r3,0
+	mtspr	SPRN_L2CR2,r3
+	mtlr	r4
+	blr
+_GLOBAL(__setup_cpu_745x)
+	mflr	r4
+	bl	setup_common_caches
+	bl	setup_745x_specifics
+	mtlr	r4
+	blr
+
+/* Enable caches for 603's, 604, 750 & 7400 */
+setup_common_caches:
+	mfspr	r11,SPRN_HID0
+	andi.	r0,r11,HID0_DCE
+	ori	r11,r11,HID0_ICE|HID0_DCE
+	ori	r8,r11,HID0_ICFI
+	bne	1f			/* don't invalidate the D-cache */
+	ori	r8,r8,HID0_DCI		/* unless it wasn't enabled */
+1:	sync
+	mtspr	SPRN_HID0,r8			/* enable and invalidate caches */
+	sync
+	mtspr	SPRN_HID0,r11		/* enable caches */
+	sync
+	isync
+	blr
+
+/* 604, 604e, 604ev, ...
+ * Enable superscalar execution & branch history table
+ */
+setup_604_hid0:
+	mfspr	r11,SPRN_HID0
+	ori	r11,r11,HID0_SIED|HID0_BHTE
+	ori	r8,r11,HID0_BTCD
+	sync
+	mtspr	SPRN_HID0,r8	/* flush branch target address cache */
+	sync			/* on 604e/604r */
+	mtspr	SPRN_HID0,r11
+	sync
+	isync
+	blr
+
+/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
+ * erratas we work around here.
+ * Moto MPC710CE.pdf describes them, those are errata
+ * #3, #4 and #5
+ * Note that we assume the firmware didn't choose to
+ * apply other workarounds (there are other ones documented
+ * in the .pdf). It appear that Apple firmware only works
+ * around #3 and with the same fix we use. We may want to
+ * check if the CPU is using 60x bus mode in which case
+ * the workaround for errata #4 is useless. Also, we may
+ * want to explicitely clear HID0_NOPDST as this is not
+ * needed once we have applied workaround #5 (though it's
+ * not set by Apple's firmware at least).
+ */
+setup_7400_workarounds:
+	mfpvr	r3
+	rlwinm	r3,r3,0,20,31
+	cmpwi	0,r3,0x0207
+	ble	1f
+	blr
+setup_7410_workarounds:
+	mfpvr	r3
+	rlwinm	r3,r3,0,20,31
+	cmpwi	0,r3,0x0100
+	bnelr
+1:
+	mfspr	r11,SPRN_MSSSR0
+	/* Errata #3: Set L1OPQ_SIZE to 0x10 */
+	rlwinm	r11,r11,0,9,6
+	oris	r11,r11,0x0100
+	/* Errata #4: Set L2MQ_SIZE to 1 (check for MPX mode first ?) */
+	oris	r11,r11,0x0002
+	/* Errata #5: Set DRLT_SIZE to 0x01 */
+	rlwinm	r11,r11,0,5,2
+	oris	r11,r11,0x0800
+	sync
+	mtspr	SPRN_MSSSR0,r11
+	sync
+	isync
+	blr
+
+/* 740/750/7400/7410
+ * Enable Store Gathering (SGE), Address Brodcast (ABE),
+ * Branch History Table (BHTE), Branch Target ICache (BTIC)
+ * Dynamic Power Management (DPM), Speculative (SPD)
+ * Clear Instruction cache throttling (ICTC)
+ */
+setup_750_7400_hid0:
+	mfspr	r11,SPRN_HID0
+	ori	r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC
+BEGIN_FTR_SECTION
+	oris	r11,r11,HID0_DPM@h	/* enable dynamic power mgmt */
+END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
+	li	r3,HID0_SPD
+	andc	r11,r11,r3		/* clear SPD: enable speculative */
+ 	li	r3,0
+ 	mtspr	SPRN_ICTC,r3		/* Instruction Cache Throttling off */
+	isync
+	mtspr	SPRN_HID0,r11
+	sync
+	isync
+	blr
+
+/* 750cx specific
+ * Looks like we have to disable NAP feature for some PLL settings...
+ * (waiting for confirmation)
+ */
+setup_750cx:
+	mfspr	r10, SPRN_HID1
+	rlwinm	r10,r10,4,28,31
+	cmpwi	cr0,r10,7
+	cmpwi	cr1,r10,9
+	cmpwi	cr2,r10,11
+	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
+	cror	4*cr0+eq,4*cr0+eq,4*cr2+eq
+	bnelr
+	lwz	r6,CPU_SPEC_FEATURES(r5)
+	li	r7,CPU_FTR_CAN_NAP
+	andc	r6,r6,r7
+	stw	r6,CPU_SPEC_FEATURES(r5)
+	blr
+
+/* 750fx specific
+ */
+setup_750fx:
+	blr
+
+/* MPC 745x
+ * Enable Store Gathering (SGE), Branch Folding (FOLD)
+ * Branch History Table (BHTE), Branch Target ICache (BTIC)
+ * Dynamic Power Management (DPM), Speculative (SPD)
+ * Ensure our data cache instructions really operate.
+ * Timebase has to be running or we wouldn't have made it here,
+ * just ensure we don't disable it.
+ * Clear Instruction cache throttling (ICTC)
+ * Enable L2 HW prefetch
+ */
+setup_745x_specifics:
+	/* We check for the presence of an L3 cache setup by
+	 * the firmware. If any, we disable NAP capability as
+	 * it's known to be bogus on rev 2.1 and earlier
+	 */
+	mfspr	r11,SPRN_L3CR
+	andis.	r11,r11,L3CR_L3E@h
+	beq	1f
+	lwz	r6,CPU_SPEC_FEATURES(r5)
+	andi.	r0,r6,CPU_FTR_L3_DISABLE_NAP
+	beq	1f
+	li	r7,CPU_FTR_CAN_NAP
+	andc	r6,r6,r7
+	stw	r6,CPU_SPEC_FEATURES(r5)
+1:
+	mfspr	r11,SPRN_HID0
+
+	/* All of the bits we have to set.....
+	 */
+	ori	r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE | HID0_LRSTK | HID0_BTIC
+BEGIN_FTR_SECTION
+	xori	r11,r11,HID0_BTIC
+END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
+BEGIN_FTR_SECTION
+	oris	r11,r11,HID0_DPM@h	/* enable dynamic power mgmt */
+END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
+
+	/* All of the bits we have to clear....
+	 */
+	li	r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI
+	andc	r11,r11,r3		/* clear SPD: enable speculative */
+ 	li	r3,0
+
+ 	mtspr	SPRN_ICTC,r3		/* Instruction Cache Throttling off */
+	isync
+	mtspr	SPRN_HID0,r11
+	sync
+	isync
+
+	/* Enable L2 HW prefetch
+	 */
+	mfspr	r3,SPRN_MSSCR0
+	ori	r3,r3,3
+	sync
+	mtspr	SPRN_MSSCR0,r3
+	sync
+	isync
+	blr
+
+/* Definitions for the table use to save CPU states */
+#define CS_HID0		0
+#define CS_HID1		4
+#define CS_HID2		8
+#define	CS_MSSCR0	12
+#define CS_MSSSR0	16
+#define CS_ICTRL	20
+#define CS_LDSTCR	24
+#define CS_LDSTDB	28
+#define CS_SIZE		32
+
+	.data
+	.balign	L1_CACHE_LINE_SIZE
+cpu_state_storage:
+	.space	CS_SIZE
+	.balign	L1_CACHE_LINE_SIZE,0
+	.text
+
+/* Called in normal context to backup CPU 0 state. This
+ * does not include cache settings. This function is also
+ * called for machine sleep. This does not include the MMU
+ * setup, BATs, etc... but rather the "special" registers
+ * like HID0, HID1, MSSCR0, etc...
+ */
+_GLOBAL(__save_cpu_setup)
+	/* Some CR fields are volatile, we back it up all */
+	mfcr	r7
+
+	/* Get storage ptr */
+	lis	r5,cpu_state_storage@h
+	ori	r5,r5,cpu_state_storage@l
+
+	/* Save HID0 (common to all CONFIG_6xx cpus) */
+	mfspr	r3,SPRN_HID0
+	stw	r3,CS_HID0(r5)
+
+	/* Now deal with CPU type dependent registers */
+	mfspr	r3,SPRN_PVR
+	srwi	r3,r3,16
+	cmplwi	cr0,r3,0x8000	/* 7450 */
+	cmplwi	cr1,r3,0x000c	/* 7400 */
+	cmplwi	cr2,r3,0x800c	/* 7410 */
+	cmplwi	cr3,r3,0x8001	/* 7455 */
+	cmplwi	cr4,r3,0x8002	/* 7457 */
+	cmplwi	cr5,r3,0x8003	/* 7447A */
+	cmplwi	cr6,r3,0x7000	/* 750FX */
+	/* cr1 is 7400 || 7410 */
+	cror	4*cr1+eq,4*cr1+eq,4*cr2+eq
+	/* cr0 is 74xx */
+	cror	4*cr0+eq,4*cr0+eq,4*cr3+eq
+	cror	4*cr0+eq,4*cr0+eq,4*cr4+eq
+	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
+	cror	4*cr0+eq,4*cr0+eq,4*cr5+eq
+	bne	1f
+	/* Backup 74xx specific regs */
+	mfspr	r4,SPRN_MSSCR0
+	stw	r4,CS_MSSCR0(r5)
+	mfspr	r4,SPRN_MSSSR0
+	stw	r4,CS_MSSSR0(r5)
+	beq	cr1,1f
+	/* Backup 745x specific registers */
+	mfspr	r4,SPRN_HID1
+	stw	r4,CS_HID1(r5)
+	mfspr	r4,SPRN_ICTRL
+	stw	r4,CS_ICTRL(r5)
+	mfspr	r4,SPRN_LDSTCR
+	stw	r4,CS_LDSTCR(r5)
+	mfspr	r4,SPRN_LDSTDB
+	stw	r4,CS_LDSTDB(r5)
+1:
+	bne	cr6,1f
+	/* Backup 750FX specific registers */
+	mfspr	r4,SPRN_HID1
+	stw	r4,CS_HID1(r5)
+	/* If rev 2.x, backup HID2 */
+	mfspr	r3,SPRN_PVR
+	andi.	r3,r3,0xff00
+	cmpwi	cr0,r3,0x0200
+	bne	1f
+	mfspr	r4,SPRN_HID2
+	stw	r4,CS_HID2(r5)
+1:
+	mtcr	r7
+	blr
+
+/* Called with no MMU context (typically MSR:IR/DR off) to
+ * restore CPU state as backed up by the previous
+ * function. This does not include cache setting
+ */
+_GLOBAL(__restore_cpu_setup)
+	/* Some CR fields are volatile, we back it up all */
+	mfcr	r7
+
+	/* Get storage ptr */
+	lis	r5,(cpu_state_storage-KERNELBASE)@h
+	ori	r5,r5,cpu_state_storage@l
+
+	/* Restore HID0 */
+	lwz	r3,CS_HID0(r5)
+	sync
+	isync
+	mtspr	SPRN_HID0,r3
+	sync
+	isync
+
+	/* Now deal with CPU type dependent registers */
+	mfspr	r3,SPRN_PVR
+	srwi	r3,r3,16
+	cmplwi	cr0,r3,0x8000	/* 7450 */
+	cmplwi	cr1,r3,0x000c	/* 7400 */
+	cmplwi	cr2,r3,0x800c	/* 7410 */
+	cmplwi	cr3,r3,0x8001	/* 7455 */
+	cmplwi	cr4,r3,0x8002	/* 7457 */
+	cmplwi	cr5,r3,0x8003	/* 7447A */
+	cmplwi	cr6,r3,0x7000	/* 750FX */
+	/* cr1 is 7400 || 7410 */
+	cror	4*cr1+eq,4*cr1+eq,4*cr2+eq
+	/* cr0 is 74xx */
+	cror	4*cr0+eq,4*cr0+eq,4*cr3+eq
+	cror	4*cr0+eq,4*cr0+eq,4*cr4+eq
+	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
+	cror	4*cr0+eq,4*cr0+eq,4*cr5+eq
+	bne	2f
+	/* Restore 74xx specific regs */
+	lwz	r4,CS_MSSCR0(r5)
+	sync
+	mtspr	SPRN_MSSCR0,r4
+	sync
+	isync
+	lwz	r4,CS_MSSSR0(r5)
+	sync
+	mtspr	SPRN_MSSSR0,r4
+	sync
+	isync
+	bne	cr2,1f
+	/* Clear 7410 L2CR2 */
+	li	r4,0
+	mtspr	SPRN_L2CR2,r4
+1:	beq	cr1,2f
+	/* Restore 745x specific registers */
+	lwz	r4,CS_HID1(r5)
+	sync
+	mtspr	SPRN_HID1,r4
+	isync
+	sync
+	lwz	r4,CS_ICTRL(r5)
+	sync
+	mtspr	SPRN_ICTRL,r4
+	isync
+	sync
+	lwz	r4,CS_LDSTCR(r5)
+	sync
+	mtspr	SPRN_LDSTCR,r4
+	isync
+	sync
+	lwz	r4,CS_LDSTDB(r5)
+	sync
+	mtspr	SPRN_LDSTDB,r4
+	isync
+	sync
+2:	bne	cr6,1f
+	/* Restore 750FX specific registers
+	 * that is restore HID2 on rev 2.x and PLL config & switch
+	 * to PLL 0 on all
+	 */
+	/* If rev 2.x, restore HID2 with low voltage bit cleared */
+	mfspr	r3,SPRN_PVR
+	andi.	r3,r3,0xff00
+	cmpwi	cr0,r3,0x0200
+	bne	4f
+	lwz	r4,CS_HID2(r5)
+	rlwinm	r4,r4,0,19,17
+	mtspr	SPRN_HID2,r4
+	sync
+4:
+	lwz	r4,CS_HID1(r5)
+	rlwinm  r5,r4,0,16,14
+	mtspr	SPRN_HID1,r5
+		/* Wait for PLL to stabilize */
+	mftbl	r5
+3:	mftbl	r6
+	sub	r6,r6,r5
+	cmplwi	cr0,r6,10000
+	ble	3b
+	/* Setup final PLL */
+	mtspr	SPRN_HID1,r4
+1:
+	mtcr	r7
+	blr
+
diff --git a/arch/ppc/kernel/cpu_setup_power4.S b/arch/ppc/kernel/cpu_setup_power4.S
new file mode 100644
index 00000000000..f2ea1a990f1
--- /dev/null
+++ b/arch/ppc/kernel/cpu_setup_power4.S
@@ -0,0 +1,201 @@
+/*
+ * This file contains low level CPU setup functions.
+ *    Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/offsets.h>
+#include <asm/cache.h>
+
+_GLOBAL(__970_cpu_preinit)
+	/*
+	 * Deal only with PPC970 and PPC970FX.
+	 */
+	mfspr	r0,SPRN_PVR
+	srwi	r0,r0,16
+	cmpwi	cr0,r0,0x39
+	cmpwi	cr1,r0,0x3c
+	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
+	bnelr
+
+	/* Make sure HID4:rm_ci is off before MMU is turned off, that large
+	 * pages are enabled with HID4:61 and clear HID5:DCBZ_size and
+	 * HID5:DCBZ32_ill
+	 */
+	li	r0,0
+	mfspr	r11,SPRN_HID4
+	rldimi	r11,r0,40,23	/* clear bit 23 (rm_ci) */
+	rldimi	r11,r0,2,61	/* clear bit 61 (lg_pg_en) */
+	sync
+	mtspr	SPRN_HID4,r11
+	isync
+	sync
+	mfspr	r11,SPRN_HID5
+	rldimi	r11,r0,6,56	/* clear bits 56 & 57 (DCBZ*) */
+	sync
+	mtspr	SPRN_HID5,r11
+	isync
+	sync
+
+	/* Setup some basic HID1 features */
+	mfspr	r0,SPRN_HID1
+	li	r11,0x1200		/* enable i-fetch cacheability */
+	sldi	r11,r11,44		/* and prefetch */
+	or	r0,r0,r11
+	mtspr	SPRN_HID1,r0
+	mtspr	SPRN_HID1,r0
+	isync
+
+	/* Clear HIOR */
+	li	r0,0
+	sync
+	mtspr	SPRN_HIOR,0		/* Clear interrupt prefix */
+	isync
+	blr
+
+_GLOBAL(__setup_cpu_power4)
+	blr
+_GLOBAL(__setup_cpu_ppc970)
+	mfspr	r0,SPRN_HID0
+	li	r11,5			/* clear DOZE and SLEEP */
+	rldimi	r0,r11,52,8		/* set NAP and DPM */
+	mtspr	SPRN_HID0,r0
+	mfspr	r0,SPRN_HID0
+	mfspr	r0,SPRN_HID0
+	mfspr	r0,SPRN_HID0
+	mfspr	r0,SPRN_HID0
+	mfspr	r0,SPRN_HID0
+	mfspr	r0,SPRN_HID0
+	sync
+	isync
+	blr
+
+/* Definitions for the table use to save CPU states */
+#define CS_HID0		0
+#define CS_HID1		8
+#define	CS_HID4		16
+#define CS_HID5		24
+#define CS_SIZE		32
+
+	.data
+	.balign	L1_CACHE_LINE_SIZE
+cpu_state_storage:	
+	.space	CS_SIZE
+	.balign	L1_CACHE_LINE_SIZE,0
+	.text
+	
+/* Called in normal context to backup CPU 0 state. This
+ * does not include cache settings. This function is also
+ * called for machine sleep. This does not include the MMU
+ * setup, BATs, etc... but rather the "special" registers
+ * like HID0, HID1, HID4, etc...
+ */
+_GLOBAL(__save_cpu_setup)
+	/* Some CR fields are volatile, we back it up all */
+	mfcr	r7
+
+	/* Get storage ptr */
+	lis	r5,cpu_state_storage@h
+	ori	r5,r5,cpu_state_storage@l
+
+	/* We only deal with 970 for now */
+	mfspr	r0,SPRN_PVR
+	srwi	r0,r0,16
+	cmpwi	cr0,r0,0x39
+	cmpwi	cr1,r0,0x3c
+	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
+	bne	1f
+
+	/* Save HID0,1,4 and 5 */
+	mfspr	r3,SPRN_HID0
+	std	r3,CS_HID0(r5)
+	mfspr	r3,SPRN_HID1
+	std	r3,CS_HID1(r5)
+	mfspr	r3,SPRN_HID4
+	std	r3,CS_HID4(r5)
+	mfspr	r3,SPRN_HID5
+	std	r3,CS_HID5(r5)
+	
+1:
+	mtcr	r7
+	blr
+
+/* Called with no MMU context (typically MSR:IR/DR off) to
+ * restore CPU state as backed up by the previous
+ * function. This does not include cache setting
+ */
+_GLOBAL(__restore_cpu_setup)
+	/* Some CR fields are volatile, we back it up all */
+	mfcr	r7
+
+	/* Get storage ptr */
+	lis	r5,(cpu_state_storage-KERNELBASE)@h
+	ori	r5,r5,cpu_state_storage@l
+
+	/* We only deal with 970 for now */
+	mfspr	r0,SPRN_PVR
+	srwi	r0,r0,16
+	cmpwi	cr0,r0,0x39
+	cmpwi	cr1,r0,0x3c
+	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
+	bne	1f
+
+	/* Clear interrupt prefix */
+	li	r0,0
+	sync
+	mtspr	SPRN_HIOR,0
+	isync
+
+	/* Restore HID0 */
+	ld	r3,CS_HID0(r5)
+	sync
+	isync
+	mtspr	SPRN_HID0,r3
+	mfspr	r3,SPRN_HID0
+	mfspr	r3,SPRN_HID0
+	mfspr	r3,SPRN_HID0
+	mfspr	r3,SPRN_HID0
+	mfspr	r3,SPRN_HID0
+	mfspr	r3,SPRN_HID0
+	sync
+	isync
+
+	/* Restore HID1 */
+	ld	r3,CS_HID1(r5)
+	sync
+	isync
+	mtspr	SPRN_HID1,r3
+	mtspr	SPRN_HID1,r3
+	sync
+	isync
+	
+	/* Restore HID4 */
+	ld	r3,CS_HID4(r5)
+	sync
+	isync
+	mtspr	SPRN_HID4,r3
+	sync
+	isync
+
+	/* Restore HID5 */
+	ld	r3,CS_HID5(r5)
+	sync
+	isync
+	mtspr	SPRN_HID5,r3
+	sync
+	isync
+1:
+	mtcr	r7
+	blr
+
diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c
new file mode 100644
index 00000000000..8aa5e8c6900
--- /dev/null
+++ b/arch/ppc/kernel/cputable.c
@@ -0,0 +1,922 @@
+/*
+ *  arch/ppc/kernel/cputable.c
+ *
+ *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <linux/init.h>
+#include <asm/cputable.h>
+
+struct cpu_spec* cur_cpu_spec[NR_CPUS];
+
+extern void __setup_cpu_601(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_603(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_604(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_750(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_750cx(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_750fx(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_7400(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_7410(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_745x(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_power3(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_power4(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_ppc970(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_generic(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+
+#define CLASSIC_PPC (!defined(CONFIG_8xx) && !defined(CONFIG_4xx) && \
+		     !defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \
+		     !defined(CONFIG_BOOKE))
+
+/* This table only contains "desktop" CPUs, it need to be filled with embedded
+ * ones as well...
+ */
+#define COMMON_PPC	(PPC_FEATURE_32 | PPC_FEATURE_HAS_FPU | \
+			 PPC_FEATURE_HAS_MMU)
+
+/* We only set the altivec features if the kernel was compiled with altivec
+ * support
+ */
+#ifdef CONFIG_ALTIVEC
+#define CPU_FTR_ALTIVEC_COMP		CPU_FTR_ALTIVEC
+#define PPC_FEATURE_ALTIVEC_COMP    	PPC_FEATURE_HAS_ALTIVEC
+#else
+#define CPU_FTR_ALTIVEC_COMP		0
+#define PPC_FEATURE_ALTIVEC_COMP       	0
+#endif
+
+/* We only set the spe features if the kernel was compiled with
+ * spe support
+ */
+#ifdef CONFIG_SPE
+#define PPC_FEATURE_SPE_COMP    	PPC_FEATURE_HAS_SPE
+#else
+#define PPC_FEATURE_SPE_COMP       	0
+#endif
+
+/* We need to mark all pages as being coherent if we're SMP or we
+ * have a 74[45]x and an MPC107 host bridge.
+ */
+#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE)
+#define CPU_FTR_COMMON                  CPU_FTR_NEED_COHERENT
+#else
+#define CPU_FTR_COMMON                  0
+#endif
+
+/* The powersave features NAP & DOZE seems to confuse BDI when
+   debugging. So if a BDI is used, disable theses
+ */
+#ifndef CONFIG_BDI_SWITCH
+#define CPU_FTR_MAYBE_CAN_DOZE	CPU_FTR_CAN_DOZE
+#define CPU_FTR_MAYBE_CAN_NAP	CPU_FTR_CAN_NAP
+#else
+#define CPU_FTR_MAYBE_CAN_DOZE	0
+#define CPU_FTR_MAYBE_CAN_NAP	0
+#endif
+
+struct cpu_spec	cpu_specs[] = {
+#if CLASSIC_PPC
+	{ 	/* 601 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00010000,
+		.cpu_name		= "601",
+		.cpu_features		= CPU_FTR_COMMON | CPU_FTR_601 |
+			CPU_FTR_HPTE_TABLE,
+		.cpu_user_features 	= COMMON_PPC | PPC_FEATURE_601_INSTR |
+			PPC_FEATURE_UNIFIED_CACHE,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_601
+	},
+	{	/* 603 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00030000,
+		.cpu_name		= "603",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_603
+	},
+	{	/* 603e */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00060000,
+		.cpu_name		= "603e",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_603
+	},
+	{	/* 603ev */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00070000,
+		.cpu_name		= "603ev",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_603
+	},
+	{	/* 604 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00040000,
+		.cpu_name		= "604",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_604_PERF_MON | CPU_FTR_HPTE_TABLE,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 2,
+		.cpu_setup		= __setup_cpu_604
+	},
+	{	/* 604e */
+		.pvr_mask		= 0xfffff000,
+		.pvr_value		= 0x00090000,
+		.cpu_name		= "604e",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_604_PERF_MON | CPU_FTR_HPTE_TABLE,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_604
+	},
+	{	/* 604r */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00090000,
+		.cpu_name		= "604r",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_604_PERF_MON | CPU_FTR_HPTE_TABLE,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_604
+	},
+	{	/* 604ev */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x000a0000,
+		.cpu_name		= "604ev",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_604_PERF_MON | CPU_FTR_HPTE_TABLE,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_604
+	},
+	{	/* 740/750 (0x4202, don't support TAU ?) */
+		.pvr_mask		= 0xffffffff,
+		.pvr_value		= 0x00084202,
+		.cpu_name		= "740/750",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_HPTE_TABLE |
+			CPU_FTR_MAYBE_CAN_NAP,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_750
+	},
+	{	/* 745/755 */
+		.pvr_mask		= 0xfffff000,
+		.pvr_value		= 0x00083000,
+		.cpu_name		= "745/755",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_750
+	},
+	{	/* 750CX (80100 and 8010x?) */
+		.pvr_mask		= 0xfffffff0,
+		.pvr_value		= 0x00080100,
+		.cpu_name		= "750CX",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_750cx
+	},
+	{	/* 750CX (82201 and 82202) */
+		.pvr_mask		= 0xfffffff0,
+		.pvr_value		= 0x00082200,
+		.cpu_name		= "750CX",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_750cx
+	},
+	{	/* 750CXe (82214) */
+		.pvr_mask		= 0xfffffff0,
+		.pvr_value		= 0x00082210,
+		.cpu_name		= "750CXe",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_750cx
+	},
+	{	/* 750FX rev 1.x */
+		.pvr_mask		= 0xffffff00,
+		.pvr_value		= 0x70000100,
+		.cpu_name		= "750FX",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP |
+			CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_750
+	},
+	{	/* 750FX rev 2.0 must disable HID0[DPM] */
+		.pvr_mask		= 0xffffffff,
+		.pvr_value		= 0x70000200,
+		.cpu_name		= "750FX",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP |
+			CPU_FTR_NO_DPM,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_750
+	},
+	{	/* 750FX (All revs except 2.0) */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x70000000,
+		.cpu_name		= "750FX",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP |
+			CPU_FTR_DUAL_PLL_750FX | CPU_FTR_HAS_HIGH_BATS,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_750fx
+	},
+	{	/* 750GX */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x70020000,
+		.cpu_name		= "750GX",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB |
+			CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE |
+			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_DUAL_PLL_750FX |
+			CPU_FTR_HAS_HIGH_BATS,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_750fx
+	},
+	{	/* 740/750 (L2CR bit need fixup for 740) */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00080000,
+		.cpu_name		= "740/750",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_750
+	},
+	{	/* 7400 rev 1.1 ? (no TAU) */
+		.pvr_mask		= 0xffffffff,
+		.pvr_value		= 0x000c1101,
+		.cpu_name		= "7400 (1.1)",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_7400
+	},
+	{	/* 7400 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x000c0000,
+		.cpu_name		= "7400",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
+			CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE |
+			CPU_FTR_MAYBE_CAN_NAP,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_7400
+	},
+	{	/* 7410 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x800c0000,
+		.cpu_name		= "7410",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
+			CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE |
+			CPU_FTR_MAYBE_CAN_NAP,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_7410
+	},
+	{	/* 7450 2.0 - no doze/nap */
+		.pvr_mask		= 0xffffffff,
+		.pvr_value		= 0x80000200,
+		.cpu_name		= "7450",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
+			CPU_FTR_NEED_COHERENT,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 6,
+		.cpu_setup		= __setup_cpu_745x
+	},
+	{	/* 7450 2.1 */
+		.pvr_mask		= 0xffffffff,
+		.pvr_value		= 0x80000201,
+		.cpu_name		= "7450",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
+			CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
+			CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP |
+			CPU_FTR_NEED_COHERENT,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 6,
+		.cpu_setup		= __setup_cpu_745x
+	},
+	{	/* 7450 2.3 and newer */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x80000000,
+		.cpu_name		= "7450",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
+			CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
+			CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 6,
+		.cpu_setup		= __setup_cpu_745x
+	},
+	{	/* 7455 rev 1.x */
+		.pvr_mask		= 0xffffff00,
+		.pvr_value		= 0x80010100,
+		.cpu_name		= "7455",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
+			CPU_FTR_HAS_HIGH_BATS | CPU_FTR_NEED_COHERENT,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 6,
+		.cpu_setup		= __setup_cpu_745x
+	},
+	{	/* 7455 rev 2.0 */
+		.pvr_mask		= 0xffffffff,
+		.pvr_value		= 0x80010200,
+		.cpu_name		= "7455",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
+			CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
+			CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP |
+			CPU_FTR_NEED_COHERENT | CPU_FTR_HAS_HIGH_BATS,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 6,
+		.cpu_setup		= __setup_cpu_745x
+	},
+	{	/* 7455 others */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x80010000,
+		.cpu_name		= "7455",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
+			CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
+			CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS |
+			CPU_FTR_NEED_COHERENT,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 6,
+		.cpu_setup		= __setup_cpu_745x
+	},
+	{	/* 7447/7457 Rev 1.0 */
+		.pvr_mask		= 0xffffffff,
+		.pvr_value		= 0x80020100,
+		.cpu_name		= "7447/7457",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
+			CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
+			CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS |
+			CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 6,
+		.cpu_setup		= __setup_cpu_745x
+	},
+	{	/* 7447/7457 Rev 1.1 */
+		.pvr_mask		= 0xffffffff,
+		.pvr_value		= 0x80020101,
+		.cpu_name		= "7447/7457",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
+			CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
+			CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS |
+			CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 6,
+		.cpu_setup		= __setup_cpu_745x
+	},
+	{	/* 7447/7457 Rev 1.2 and later */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x80020000,
+		.cpu_name		= "7447/7457",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
+			CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
+			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
+			CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS |
+			CPU_FTR_NEED_COHERENT,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 6,
+		.cpu_setup		= __setup_cpu_745x
+	},
+	{	/* 7447A */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x80030000,
+		.cpu_name		= "7447A",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
+			CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE |
+			CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR |
+			CPU_FTR_HAS_HIGH_BATS | CPU_FTR_NEED_COHERENT,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 6,
+		.cpu_setup		= __setup_cpu_745x
+	},
+	{	/* 82xx (8240, 8245, 8260 are all 603e cores) */
+		.pvr_mask		= 0x7fff0000,
+		.pvr_value		= 0x00810000,
+		.cpu_name		= "82xx",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_603
+	},
+	{	/* All G2_LE (603e core, plus some) have the same pvr */
+		.pvr_mask		= 0x7fff0000,
+		.pvr_value		= 0x00820000,
+		.cpu_name		= "G2_LE",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB |
+			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_603
+	},
+	{	/* e300 (a 603e core, plus some) on 83xx */
+		.pvr_mask		= 0x7fff0000,
+		.pvr_value		= 0x00830000,
+		.cpu_name		= "e300",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB |
+			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_603
+	},
+	{	/* default match, we assume split I/D cache & TB (non-601)... */
+		.pvr_mask		= 0x00000000,
+		.pvr_value		= 0x00000000,
+		.cpu_name		= "(generic PPC)",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_HPTE_TABLE,
+		.cpu_user_features	= COMMON_PPC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_generic
+	},
+#endif /* CLASSIC_PPC */
+#ifdef CONFIG_PPC64BRIDGE
+	{	/* Power3 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00400000,
+		.cpu_name		= "Power3 (630)",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_HPTE_TABLE,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_64,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_power3
+	},
+	{	/* Power3+ */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00410000,
+		.cpu_name		= "Power3 (630+)",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_HPTE_TABLE,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_64,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_power3
+	},
+	{	/* I-star */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00360000,
+		.cpu_name		= "I-star",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_HPTE_TABLE,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_64,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_power3
+	},
+	{	/* S-star */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00370000,
+		.cpu_name		= "S-star",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_HPTE_TABLE,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_64,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_power3
+	},
+#endif /* CONFIG_PPC64BRIDGE */
+#ifdef CONFIG_POWER4
+	{	/* Power4 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00350000,
+		.cpu_name		= "Power4",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_HPTE_TABLE,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_64,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_power4
+	},
+	{	/* PPC970 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00390000,
+		.cpu_name		= "PPC970",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_HPTE_TABLE |
+			CPU_FTR_ALTIVEC_COMP | CPU_FTR_MAYBE_CAN_NAP,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_64 |
+			PPC_FEATURE_ALTIVEC_COMP,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_ppc970
+	},
+	{	/* PPC970FX */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x003c0000,
+		.cpu_name		= "PPC970FX",
+		.cpu_features		= CPU_FTR_COMMON |
+			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+			CPU_FTR_HPTE_TABLE |
+			CPU_FTR_ALTIVEC_COMP | CPU_FTR_MAYBE_CAN_NAP,
+		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_64 |
+			PPC_FEATURE_ALTIVEC_COMP,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_ppc970
+	},
+#endif /* CONFIG_POWER4 */
+#ifdef CONFIG_8xx
+	{	/* 8xx */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00500000,
+		.cpu_name		= "8xx",
+		/* CPU_FTR_MAYBE_CAN_DOZE is possible,
+		 * if the 8xx code is there.... */
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.icache_bsize		= 16,
+		.dcache_bsize		= 16,
+	},
+#endif /* CONFIG_8xx */
+#ifdef CONFIG_40x
+	{	/* 403GC */
+		.pvr_mask		= 0xffffff00,
+		.pvr_value		= 0x00200200,
+		.cpu_name		= "403GC",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.icache_bsize		= 16,
+		.dcache_bsize		= 16,
+	},
+	{	/* 403GCX */
+		.pvr_mask		= 0xffffff00,
+		.pvr_value		= 0x00201400,
+		.cpu_name		= "403GCX",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.icache_bsize		= 16,
+		.dcache_bsize		= 16,
+	},
+	{	/* 403G ?? */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00200000,
+		.cpu_name		= "403G ??",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.icache_bsize		= 16,
+		.dcache_bsize		= 16,
+	},
+	{	/* 405GP */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x40110000,
+		.cpu_name		= "405GP",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{	/* STB 03xxx */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x40130000,
+		.cpu_name		= "STB03xxx",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{	/* STB 04xxx */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x41810000,
+		.cpu_name		= "STB04xxx",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{	/* NP405L */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x41610000,
+		.cpu_name		= "NP405L",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{	/* NP4GS3 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x40B10000,
+		.cpu_name		= "NP4GS3",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{   /* NP405H */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x41410000,
+		.cpu_name		= "NP405H",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{	/* 405GPr */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x50910000,
+		.cpu_name		= "405GPr",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{   /* STBx25xx */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x51510000,
+		.cpu_name		= "STBx25xx",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{	/* 405LP */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x41F10000,
+		.cpu_name		= "405LP",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{	/* Xilinx Virtex-II Pro  */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x20010000,
+		.cpu_name		= "Virtex-II Pro",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+
+#endif /* CONFIG_40x */
+#ifdef CONFIG_44x
+	{ 	/* 440GP Rev. B */
+		.pvr_mask		= 0xf0000fff,
+		.pvr_value		= 0x40000440,
+		.cpu_name		= "440GP Rev. B",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{ 	/* 440GP Rev. C */
+		.pvr_mask		= 0xf0000fff,
+		.pvr_value		= 0x40000481,
+		.cpu_name		= "440GP Rev. C",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{ /* 440GX Rev. A */
+		.pvr_mask		= 0xf0000fff,
+		.pvr_value		= 0x50000850,
+		.cpu_name		= "440GX Rev. A",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{ /* 440GX Rev. B */
+		.pvr_mask		= 0xf0000fff,
+		.pvr_value		= 0x50000851,
+		.cpu_name		= "440GX Rev. B",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{ /* 440GX Rev. C */
+		.pvr_mask		= 0xf0000fff,
+		.pvr_value		= 0x50000892,
+		.cpu_name		= "440GX Rev. C",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+#endif /* CONFIG_44x */
+#ifdef CONFIG_E500
+	{ 	/* e500 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x80200000,
+		.cpu_name		= "e500",
+		/* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_SPE_COMP |
+			PPC_FEATURE_HAS_EFP_SINGLE,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+	},
+#endif
+#if !CLASSIC_PPC
+	{	/* default match */
+		.pvr_mask		= 0x00000000,
+		.pvr_value		= 0x00000000,
+		.cpu_name		= "(generic PPC)",
+		.cpu_features		= CPU_FTR_COMMON,
+		.cpu_user_features	= PPC_FEATURE_32,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	}
+#endif /* !CLASSIC_PPC */
+};
diff --git a/arch/ppc/kernel/dma-mapping.c b/arch/ppc/kernel/dma-mapping.c
new file mode 100644
index 00000000000..e0c631cf96b
--- /dev/null
+++ b/arch/ppc/kernel/dma-mapping.c
@@ -0,0 +1,447 @@
+/*
+ *  PowerPC version derived from arch/arm/mm/consistent.c
+ *    Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * Consistent memory allocators.  Used for DMA devices that want to
+ * share uncached memory with the processor core.  The function return
+ * is the virtual address and 'dma_handle' is the physical address.
+ * Mostly stolen from the ARM port, with some changes for PowerPC.
+ *						-- Dan
+ *
+ * Reorganized to get rid of the arch-specific consistent_* functions
+ * and provide non-coherent implementations for the DMA API. -Matt
+ *
+ * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
+ * implementation. This is pulled straight from ARM and barely
+ * modified. -Matt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/dma-mapping.h>
+#include <linux/hardirq.h>
+
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+
+int map_page(unsigned long va, phys_addr_t pa, int flags);
+
+#include <asm/tlbflush.h>
+
+/*
+ * This address range defaults to a value that is safe for all
+ * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It
+ * can be further configured for specific applications under
+ * the "Advanced Setup" menu. -Matt
+ */
+#define CONSISTENT_BASE	(CONFIG_CONSISTENT_START)
+#define CONSISTENT_END	(CONFIG_CONSISTENT_START + CONFIG_CONSISTENT_SIZE)
+#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+
+/*
+ * This is the page table (2MB) covering uncached, DMA consistent allocations
+ */
+static pte_t *consistent_pte;
+static DEFINE_SPINLOCK(consistent_lock);
+
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ *  struct vm_struct {
+ *    struct vm_region	region;
+ *    unsigned long	flags;
+ *    struct page	**pages;
+ *    unsigned int	nr_pages;
+ *    unsigned long	phys_addr;
+ *  };
+ *
+ * get_vm_area() would then call vm_region_alloc with an appropriate
+ * struct vm_region head (eg):
+ *
+ *  struct vm_region vmalloc_head = {
+ *	.vm_list	= LIST_HEAD_INIT(vmalloc_head.vm_list),
+ *	.vm_start	= VMALLOC_START,
+ *	.vm_end		= VMALLOC_END,
+ *  };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vm_region_alloc().
+ */
+struct vm_region {
+	struct list_head	vm_list;
+	unsigned long		vm_start;
+	unsigned long		vm_end;
+};
+
+static struct vm_region consistent_head = {
+	.vm_list	= LIST_HEAD_INIT(consistent_head.vm_list),
+	.vm_start	= CONSISTENT_BASE,
+	.vm_end		= CONSISTENT_END,
+};
+
+static struct vm_region *
+vm_region_alloc(struct vm_region *head, size_t size, int gfp)
+{
+	unsigned long addr = head->vm_start, end = head->vm_end - size;
+	unsigned long flags;
+	struct vm_region *c, *new;
+
+	new = kmalloc(sizeof(struct vm_region), gfp);
+	if (!new)
+		goto out;
+
+	spin_lock_irqsave(&consistent_lock, flags);
+
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if ((addr + size) < addr)
+			goto nospc;
+		if ((addr + size) <= c->vm_start)
+			goto found;
+		addr = c->vm_end;
+		if (addr > end)
+			goto nospc;
+	}
+
+ found:
+	/*
+	 * Insert this entry _before_ the one we found.
+	 */
+	list_add_tail(&new->vm_list, &c->vm_list);
+	new->vm_start = addr;
+	new->vm_end = addr + size;
+
+	spin_unlock_irqrestore(&consistent_lock, flags);
+	return new;
+
+ nospc:
+	spin_unlock_irqrestore(&consistent_lock, flags);
+	kfree(new);
+ out:
+	return NULL;
+}
+
+static struct vm_region *vm_region_find(struct vm_region *head, unsigned long addr)
+{
+	struct vm_region *c;
+
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if (c->vm_start == addr)
+			goto out;
+	}
+	c = NULL;
+ out:
+	return c;
+}
+
+/*
+ * Allocate DMA-coherent memory space and return both the kernel remapped
+ * virtual and bus address for that space.
+ */
+void *
+__dma_alloc_coherent(size_t size, dma_addr_t *handle, int gfp)
+{
+	struct page *page;
+	struct vm_region *c;
+	unsigned long order;
+	u64 mask = 0x00ffffff, limit; /* ISA default */
+
+	if (!consistent_pte) {
+		printk(KERN_ERR "%s: not initialised\n", __func__);
+		dump_stack();
+		return NULL;
+	}
+
+	size = PAGE_ALIGN(size);
+	limit = (mask + 1) & ~mask;
+	if ((limit && size >= limit) || size >= (CONSISTENT_END - CONSISTENT_BASE)) {
+		printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n",
+		       size, mask);
+		return NULL;
+	}
+
+	order = get_order(size);
+
+	if (mask != 0xffffffff)
+		gfp |= GFP_DMA;
+
+	page = alloc_pages(gfp, order);
+	if (!page)
+		goto no_page;
+
+	/*
+	 * Invalidate any data that might be lurking in the
+	 * kernel direct-mapped region for device DMA.
+	 */
+	{
+		unsigned long kaddr = (unsigned long)page_address(page);
+		memset(page_address(page), 0, size);
+		flush_dcache_range(kaddr, kaddr + size);
+	}
+
+	/*
+	 * Allocate a virtual address in the consistent mapping region.
+	 */
+	c = vm_region_alloc(&consistent_head, size,
+			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
+	if (c) {
+		unsigned long vaddr = c->vm_start;
+		pte_t *pte = consistent_pte + CONSISTENT_OFFSET(vaddr);
+		struct page *end = page + (1 << order);
+
+		/*
+		 * Set the "dma handle"
+		 */
+		*handle = page_to_bus(page);
+
+		do {
+			BUG_ON(!pte_none(*pte));
+
+			set_page_count(page, 1);
+			SetPageReserved(page);
+			set_pte_at(&init_mm, vaddr,
+				   pte, mk_pte(page, pgprot_noncached(PAGE_KERNEL)));
+			page++;
+			pte++;
+			vaddr += PAGE_SIZE;
+		} while (size -= PAGE_SIZE);
+
+		/*
+		 * Free the otherwise unused pages.
+		 */
+		while (page < end) {
+			set_page_count(page, 1);
+			__free_page(page);
+			page++;
+		}
+
+		return (void *)c->vm_start;
+	}
+
+	if (page)
+		__free_pages(page, order);
+ no_page:
+	return NULL;
+}
+EXPORT_SYMBOL(__dma_alloc_coherent);
+
+/*
+ * free a page as defined by the above mapping.
+ */
+void __dma_free_coherent(size_t size, void *vaddr)
+{
+	struct vm_region *c;
+	unsigned long flags, addr;
+	pte_t *ptep;
+
+	size = PAGE_ALIGN(size);
+
+	spin_lock_irqsave(&consistent_lock, flags);
+
+	c = vm_region_find(&consistent_head, (unsigned long)vaddr);
+	if (!c)
+		goto no_area;
+
+	if ((c->vm_end - c->vm_start) != size) {
+		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+		       __func__, c->vm_end - c->vm_start, size);
+		dump_stack();
+		size = c->vm_end - c->vm_start;
+	}
+
+	ptep = consistent_pte + CONSISTENT_OFFSET(c->vm_start);
+	addr = c->vm_start;
+	do {
+		pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
+		unsigned long pfn;
+
+		ptep++;
+		addr += PAGE_SIZE;
+
+		if (!pte_none(pte) && pte_present(pte)) {
+			pfn = pte_pfn(pte);
+
+			if (pfn_valid(pfn)) {
+				struct page *page = pfn_to_page(pfn);
+				ClearPageReserved(page);
+
+				__free_page(page);
+				continue;
+			}
+		}
+
+		printk(KERN_CRIT "%s: bad page in kernel page table\n",
+		       __func__);
+	} while (size -= PAGE_SIZE);
+
+	flush_tlb_kernel_range(c->vm_start, c->vm_end);
+
+	list_del(&c->vm_list);
+
+	spin_unlock_irqrestore(&consistent_lock, flags);
+
+	kfree(c);
+	return;
+
+ no_area:
+	spin_unlock_irqrestore(&consistent_lock, flags);
+	printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+	       __func__, vaddr);
+	dump_stack();
+}
+EXPORT_SYMBOL(__dma_free_coherent);
+
+/*
+ * Initialise the consistent memory allocation.
+ */
+static int __init dma_alloc_init(void)
+{
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *pte;
+	int ret = 0;
+
+	spin_lock(&init_mm.page_table_lock);
+
+	do {
+		pgd = pgd_offset(&init_mm, CONSISTENT_BASE);
+		pmd = pmd_alloc(&init_mm, pgd, CONSISTENT_BASE);
+		if (!pmd) {
+			printk(KERN_ERR "%s: no pmd tables\n", __func__);
+			ret = -ENOMEM;
+			break;
+		}
+		WARN_ON(!pmd_none(*pmd));
+
+		pte = pte_alloc_kernel(&init_mm, pmd, CONSISTENT_BASE);
+		if (!pte) {
+			printk(KERN_ERR "%s: no pte tables\n", __func__);
+			ret = -ENOMEM;
+			break;
+		}
+
+		consistent_pte = pte;
+	} while (0);
+
+	spin_unlock(&init_mm.page_table_lock);
+
+	return ret;
+}
+
+core_initcall(dma_alloc_init);
+
+/*
+ * make an area consistent.
+ */
+void __dma_sync(void *vaddr, size_t size, int direction)
+{
+	unsigned long start = (unsigned long)vaddr;
+	unsigned long end   = start + size;
+
+	switch (direction) {
+	case DMA_NONE:
+		BUG();
+	case DMA_FROM_DEVICE:	/* invalidate only */
+		invalidate_dcache_range(start, end);
+		break;
+	case DMA_TO_DEVICE:		/* writeback only */
+		clean_dcache_range(start, end);
+		break;
+	case DMA_BIDIRECTIONAL:	/* writeback and invalidate */
+		flush_dcache_range(start, end);
+		break;
+	}
+}
+EXPORT_SYMBOL(__dma_sync);
+
+#ifdef CONFIG_HIGHMEM
+/*
+ * __dma_sync_page() implementation for systems using highmem.
+ * In this case, each page of a buffer must be kmapped/kunmapped
+ * in order to have a virtual address for __dma_sync(). This must
+ * not sleep so kmap_atmomic()/kunmap_atomic() are used.
+ *
+ * Note: yes, it is possible and correct to have a buffer extend
+ * beyond the first page.
+ */
+static inline void __dma_sync_page_highmem(struct page *page,
+		unsigned long offset, size_t size, int direction)
+{
+	size_t seg_size = min((size_t)PAGE_SIZE, size) - offset;
+	size_t cur_size = seg_size;
+	unsigned long flags, start, seg_offset = offset;
+	int nr_segs = PAGE_ALIGN(size + (PAGE_SIZE - offset))/PAGE_SIZE;
+	int seg_nr = 0;
+
+	local_irq_save(flags);
+
+	do {
+		start = (unsigned long)kmap_atomic(page + seg_nr,
+				KM_PPC_SYNC_PAGE) + seg_offset;
+
+		/* Sync this buffer segment */
+		__dma_sync((void *)start, seg_size, direction);
+		kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
+		seg_nr++;
+
+		/* Calculate next buffer segment size */
+		seg_size = min((size_t)PAGE_SIZE, size - cur_size);
+
+		/* Add the segment size to our running total */
+		cur_size += seg_size;
+		seg_offset = 0;
+	} while (seg_nr < nr_segs);
+
+	local_irq_restore(flags);
+}
+#endif /* CONFIG_HIGHMEM */
+
+/*
+ * __dma_sync_page makes memory consistent. identical to __dma_sync, but
+ * takes a struct page instead of a virtual address
+ */
+void __dma_sync_page(struct page *page, unsigned long offset,
+	size_t size, int direction)
+{
+#ifdef CONFIG_HIGHMEM
+	__dma_sync_page_highmem(page, offset, size, direction);
+#else
+	unsigned long start = (unsigned long)page_address(page) + offset;
+	__dma_sync((void *)start, size, direction);
+#endif
+}
+EXPORT_SYMBOL(__dma_sync_page);
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
new file mode 100644
index 00000000000..035217d6c0f
--- /dev/null
+++ b/arch/ppc/kernel/entry.S
@@ -0,0 +1,969 @@
+/*
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *  Rewritten by Cort Dougan (cort@fsmlabs.com) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@fsmlabs.com>
+ *  Adapted for Power Macintosh by Paul Mackerras.
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *  MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
+ *
+ *  This file contains the system call entry code, context switch
+ *  code, and exception/interrupt return code for PowerPC.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sys.h>
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/offsets.h>
+#include <asm/unistd.h>
+
+#undef SHOW_SYSCALLS
+#undef SHOW_SYSCALLS_TASK
+
+/*
+ * MSR_KERNEL is > 0x10000 on 4xx/Book-E since it include MSR_CE.
+ */
+#if MSR_KERNEL >= 0x10000
+#define LOAD_MSR_KERNEL(r, x)	lis r,(x)@h; ori r,r,(x)@l
+#else
+#define LOAD_MSR_KERNEL(r, x)	li r,(x)
+#endif
+
+#ifdef CONFIG_BOOKE
+#include "head_booke.h"
+	.globl	mcheck_transfer_to_handler
+mcheck_transfer_to_handler:
+	mtspr	MCHECK_SPRG,r8
+	BOOKE_LOAD_MCHECK_STACK
+	lwz	r0,GPR10-INT_FRAME_SIZE(r8)
+	stw	r0,GPR10(r11)
+	lwz	r0,GPR11-INT_FRAME_SIZE(r8)
+	stw	r0,GPR11(r11)
+	mfspr	r8,MCHECK_SPRG
+	b	transfer_to_handler_full
+
+	.globl	crit_transfer_to_handler
+crit_transfer_to_handler:
+	mtspr	CRIT_SPRG,r8
+	BOOKE_LOAD_CRIT_STACK
+	lwz	r0,GPR10-INT_FRAME_SIZE(r8)
+	stw	r0,GPR10(r11)
+	lwz	r0,GPR11-INT_FRAME_SIZE(r8)
+	stw	r0,GPR11(r11)
+	mfspr	r8,CRIT_SPRG
+	/* fall through */
+#endif
+
+#ifdef CONFIG_40x
+	.globl	crit_transfer_to_handler
+crit_transfer_to_handler:
+	lwz	r0,crit_r10@l(0)
+	stw	r0,GPR10(r11)
+	lwz	r0,crit_r11@l(0)
+	stw	r0,GPR11(r11)
+	/* fall through */
+#endif
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception, turning
+ * on address translation.
+ * Note that we rely on the caller having set cr0.eq iff the exception
+ * occurred in kernel mode (i.e. MSR:PR = 0).
+ */
+	.globl	transfer_to_handler_full
+transfer_to_handler_full:
+	SAVE_NVGPRS(r11)
+	/* fall through */
+
+	.globl	transfer_to_handler
+transfer_to_handler:
+	stw	r2,GPR2(r11)
+	stw	r12,_NIP(r11)
+	stw	r9,_MSR(r11)
+	andi.	r2,r9,MSR_PR
+	mfctr	r12
+	mfspr	r2,SPRN_XER
+	stw	r12,_CTR(r11)
+	stw	r2,_XER(r11)
+	mfspr	r12,SPRN_SPRG3
+	addi	r2,r12,-THREAD
+	tovirt(r2,r2)			/* set r2 to current */
+	beq	2f			/* if from user, fix up THREAD.regs */
+	addi	r11,r1,STACK_FRAME_OVERHEAD
+	stw	r11,PT_REGS(r12)
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+	/* Check to see if the dbcr0 register is set up to debug.  Use the
+	   single-step bit to do this. */
+	lwz	r12,THREAD_DBCR0(r12)
+	andis.	r12,r12,DBCR0_IC@h
+	beq+	3f
+	/* From user and task is ptraced - load up global dbcr0 */
+	li	r12,-1			/* clear all pending debug events */
+	mtspr	SPRN_DBSR,r12
+	lis	r11,global_dbcr0@ha
+	tophys(r11,r11)
+	addi	r11,r11,global_dbcr0@l
+	lwz	r12,0(r11)
+	mtspr	SPRN_DBCR0,r12
+	lwz	r12,4(r11)
+	addi	r12,r12,-1
+	stw	r12,4(r11)
+#endif
+	b	3f
+2:	/* if from kernel, check interrupted DOZE/NAP mode and
+         * check for stack overflow
+         */
+#ifdef CONFIG_6xx
+	mfspr	r11,SPRN_HID0
+	mtcr	r11
+BEGIN_FTR_SECTION
+	bt-	8,power_save_6xx_restore	/* Check DOZE */
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+BEGIN_FTR_SECTION
+	bt-	9,power_save_6xx_restore	/* Check NAP */
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+#endif /* CONFIG_6xx */
+	.globl transfer_to_handler_cont
+transfer_to_handler_cont:
+	lwz	r11,THREAD_INFO-THREAD(r12)
+	cmplw	r1,r11			/* if r1 <= current->thread_info */
+	ble-	stack_ovf		/* then the kernel stack overflowed */
+3:
+	mflr	r9
+	lwz	r11,0(r9)		/* virtual address of handler */
+	lwz	r9,4(r9)		/* where to go when done */
+	FIX_SRR1(r10,r12)
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r10
+	mtlr	r9
+	SYNC
+	RFI				/* jump to handler, enable MMU */
+
+/*
+ * On kernel stack overflow, load up an initial stack pointer
+ * and call StackOverflow(regs), which should not return.
+ */
+stack_ovf:
+	/* sometimes we use a statically-allocated stack, which is OK. */
+	lis	r11,_end@h
+	ori	r11,r11,_end@l
+	cmplw	r1,r11
+	ble	3b			/* r1 <= &_end is OK */
+	SAVE_NVGPRS(r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	lis	r1,init_thread_union@ha
+	addi	r1,r1,init_thread_union@l
+	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+	lis	r9,StackOverflow@ha
+	addi	r9,r9,StackOverflow@l
+	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
+	FIX_SRR1(r10,r12)
+	mtspr	SPRN_SRR0,r9
+	mtspr	SPRN_SRR1,r10
+	SYNC
+	RFI
+
+/*
+ * Handle a system call.
+ */
+	.stabs	"arch/ppc/kernel/",N_SO,0,0,0f
+	.stabs	"entry.S",N_SO,0,0,0f
+0:
+
+_GLOBAL(DoSyscall)
+	stw	r0,THREAD+LAST_SYSCALL(r2)
+	stw	r3,ORIG_GPR3(r1)
+	li	r12,0
+	stw	r12,RESULT(r1)
+	lwz	r11,_CCR(r1)	/* Clear SO bit in CR */
+	rlwinm	r11,r11,0,4,2
+	stw	r11,_CCR(r1)
+#ifdef SHOW_SYSCALLS
+	bl	do_show_syscall
+#endif /* SHOW_SYSCALLS */
+	rlwinm	r10,r1,0,0,18	/* current_thread_info() */
+	lwz	r11,TI_LOCAL_FLAGS(r10)
+	rlwinm	r11,r11,0,~_TIFL_FORCE_NOERROR
+	stw	r11,TI_LOCAL_FLAGS(r10)
+	lwz	r11,TI_FLAGS(r10)
+	andi.	r11,r11,_TIF_SYSCALL_TRACE
+	bne-	syscall_dotrace
+syscall_dotrace_cont:
+	cmplwi	0,r0,NR_syscalls
+	lis	r10,sys_call_table@h
+	ori	r10,r10,sys_call_table@l
+	slwi	r0,r0,2
+	bge-	66f
+	lwzx	r10,r10,r0	/* Fetch system call handler [ptr] */
+	mtlr	r10
+	addi	r9,r1,STACK_FRAME_OVERHEAD
+	blrl			/* Call handler */
+	.globl	ret_from_syscall
+ret_from_syscall:
+#ifdef SHOW_SYSCALLS
+	bl	do_show_syscall_exit
+#endif
+	mr	r6,r3
+	li	r11,-_LAST_ERRNO
+	cmplw	0,r3,r11
+	rlwinm	r12,r1,0,0,18	/* current_thread_info() */
+	blt+	30f
+	lwz	r11,TI_LOCAL_FLAGS(r12)
+	andi.	r11,r11,_TIFL_FORCE_NOERROR
+	bne	30f
+	neg	r3,r3
+	lwz	r10,_CCR(r1)	/* Set SO bit in CR */
+	oris	r10,r10,0x1000
+	stw	r10,_CCR(r1)
+
+	/* disable interrupts so current_thread_info()->flags can't change */
+30:	LOAD_MSR_KERNEL(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
+	SYNC
+	MTMSRD(r10)
+	lwz	r9,TI_FLAGS(r12)
+	andi.	r0,r9,(_TIF_SYSCALL_TRACE|_TIF_SIGPENDING|_TIF_NEED_RESCHED)
+	bne-	syscall_exit_work
+syscall_exit_cont:
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+	/* If the process has its own DBCR0 value, load it up.  The single
+	   step bit tells us that dbcr0 should be loaded. */
+	lwz	r0,THREAD+THREAD_DBCR0(r2)
+	andis.	r10,r0,DBCR0_IC@h
+	bnel-	load_dbcr0
+#endif
+	stwcx.	r0,0,r1			/* to clear the reservation */
+	lwz	r4,_LINK(r1)
+	lwz	r5,_CCR(r1)
+	mtlr	r4
+	mtcr	r5
+	lwz	r7,_NIP(r1)
+	lwz	r8,_MSR(r1)
+	FIX_SRR1(r8, r0)
+	lwz	r2,GPR2(r1)
+	lwz	r1,GPR1(r1)
+	mtspr	SPRN_SRR0,r7
+	mtspr	SPRN_SRR1,r8
+	SYNC
+	RFI
+
+66:	li	r3,-ENOSYS
+	b	ret_from_syscall
+
+	.globl	ret_from_fork
+ret_from_fork:
+	REST_NVGPRS(r1)
+	bl	schedule_tail
+	li	r3,0
+	b	ret_from_syscall
+
+/* Traced system call support */
+syscall_dotrace:
+	SAVE_NVGPRS(r1)
+	li	r0,0xc00
+	stw	r0,TRAP(r1)
+	bl	do_syscall_trace
+	lwz	r0,GPR0(r1)	/* Restore original registers */
+	lwz	r3,GPR3(r1)
+	lwz	r4,GPR4(r1)
+	lwz	r5,GPR5(r1)
+	lwz	r6,GPR6(r1)
+	lwz	r7,GPR7(r1)
+	lwz	r8,GPR8(r1)
+	REST_NVGPRS(r1)
+	b	syscall_dotrace_cont
+
+syscall_exit_work:
+	stw	r6,RESULT(r1)	/* Save result */
+	stw	r3,GPR3(r1)	/* Update return value */
+	andi.	r0,r9,_TIF_SYSCALL_TRACE
+	beq	5f
+	ori	r10,r10,MSR_EE
+	SYNC
+	MTMSRD(r10)		/* re-enable interrupts */
+	lwz	r4,TRAP(r1)
+	andi.	r4,r4,1
+	beq	4f
+	SAVE_NVGPRS(r1)
+	li	r4,0xc00
+	stw	r4,TRAP(r1)
+4:
+	bl	do_syscall_trace
+	REST_NVGPRS(r1)
+2:
+	lwz	r3,GPR3(r1)
+	LOAD_MSR_KERNEL(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
+	SYNC
+	MTMSRD(r10)		/* disable interrupts again */
+	rlwinm	r12,r1,0,0,18	/* current_thread_info() */
+	lwz	r9,TI_FLAGS(r12)
+5:
+	andi.	r0,r9,_TIF_NEED_RESCHED
+	bne	1f
+	lwz	r5,_MSR(r1)
+	andi.	r5,r5,MSR_PR
+	beq	syscall_exit_cont
+	andi.	r0,r9,_TIF_SIGPENDING
+	beq	syscall_exit_cont
+	b	do_user_signal
+1:
+	ori	r10,r10,MSR_EE
+	SYNC
+	MTMSRD(r10)		/* re-enable interrupts */
+	bl	schedule
+	b	2b
+
+#ifdef SHOW_SYSCALLS
+do_show_syscall:
+#ifdef SHOW_SYSCALLS_TASK
+	lis	r11,show_syscalls_task@ha
+	lwz	r11,show_syscalls_task@l(r11)
+	cmp	0,r2,r11
+	bnelr
+#endif
+	stw	r31,GPR31(r1)
+	mflr	r31
+	lis	r3,7f@ha
+	addi	r3,r3,7f@l
+	lwz	r4,GPR0(r1)
+	lwz	r5,GPR3(r1)
+	lwz	r6,GPR4(r1)
+	lwz	r7,GPR5(r1)
+	lwz	r8,GPR6(r1)
+	lwz	r9,GPR7(r1)
+	bl	printk
+	lis	r3,77f@ha
+	addi	r3,r3,77f@l
+	lwz	r4,GPR8(r1)
+	mr	r5,r2
+	bl	printk
+	lwz	r0,GPR0(r1)
+	lwz	r3,GPR3(r1)
+	lwz	r4,GPR4(r1)
+	lwz	r5,GPR5(r1)
+	lwz	r6,GPR6(r1)
+	lwz	r7,GPR7(r1)
+	lwz	r8,GPR8(r1)
+	mtlr	r31
+	lwz	r31,GPR31(r1)
+	blr
+
+do_show_syscall_exit:
+#ifdef SHOW_SYSCALLS_TASK
+	lis	r11,show_syscalls_task@ha
+	lwz	r11,show_syscalls_task@l(r11)
+	cmp	0,r2,r11
+	bnelr
+#endif
+	stw	r31,GPR31(r1)
+	mflr	r31
+	stw	r3,RESULT(r1)	/* Save result */
+	mr	r4,r3
+	lis	r3,79f@ha
+	addi	r3,r3,79f@l
+	bl	printk
+	lwz	r3,RESULT(r1)
+	mtlr	r31
+	lwz	r31,GPR31(r1)
+	blr
+
+7:	.string	"syscall %d(%x, %x, %x, %x, %x, "
+77:	.string	"%x), current=%p\n"
+79:	.string	" -> %x\n"
+	.align	2,0
+
+#ifdef SHOW_SYSCALLS_TASK
+	.data
+	.globl	show_syscalls_task
+show_syscalls_task:
+	.long	-1
+	.text
+#endif
+#endif /* SHOW_SYSCALLS */
+
+/*
+ * The sigsuspend and rt_sigsuspend system calls can call do_signal
+ * and thus put the process into the stopped state where we might
+ * want to examine its user state with ptrace.  Therefore we need
+ * to save all the nonvolatile registers (r13 - r31) before calling
+ * the C code.
+ */
+	.globl	ppc_sigsuspend
+ppc_sigsuspend:
+	SAVE_NVGPRS(r1)
+	lwz	r0,TRAP(r1)
+	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
+	stw	r0,TRAP(r1)		/* register set saved */
+	b	sys_sigsuspend
+
+	.globl	ppc_rt_sigsuspend
+ppc_rt_sigsuspend:
+	SAVE_NVGPRS(r1)
+	lwz	r0,TRAP(r1)
+	rlwinm	r0,r0,0,0,30
+	stw	r0,TRAP(r1)
+	b	sys_rt_sigsuspend
+
+	.globl	ppc_fork
+ppc_fork:
+	SAVE_NVGPRS(r1)
+	lwz	r0,TRAP(r1)
+	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
+	stw	r0,TRAP(r1)		/* register set saved */
+	b	sys_fork
+
+	.globl	ppc_vfork
+ppc_vfork:
+	SAVE_NVGPRS(r1)
+	lwz	r0,TRAP(r1)
+	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
+	stw	r0,TRAP(r1)		/* register set saved */
+	b	sys_vfork
+
+	.globl	ppc_clone
+ppc_clone:
+	SAVE_NVGPRS(r1)
+	lwz	r0,TRAP(r1)
+	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
+	stw	r0,TRAP(r1)		/* register set saved */
+	b	sys_clone
+
+	.globl	ppc_swapcontext
+ppc_swapcontext:
+	SAVE_NVGPRS(r1)
+	lwz	r0,TRAP(r1)
+	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
+	stw	r0,TRAP(r1)		/* register set saved */
+	b	sys_swapcontext
+
+/*
+ * Top-level page fault handling.
+ * This is in assembler because if do_page_fault tells us that
+ * it is a bad kernel page fault, we want to save the non-volatile
+ * registers before calling bad_page_fault.
+ */
+	.globl	handle_page_fault
+handle_page_fault:
+	stw	r4,_DAR(r1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	do_page_fault
+	cmpwi	r3,0
+	beq+	ret_from_except
+	SAVE_NVGPRS(r1)
+	lwz	r0,TRAP(r1)
+	clrrwi	r0,r0,1
+	stw	r0,TRAP(r1)
+	mr	r5,r3
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	lwz	r4,_DAR(r1)
+	bl	bad_page_fault
+	b	ret_from_except_full
+
+/*
+ * This routine switches between two different tasks.  The process
+ * state of one is saved on its kernel stack.  Then the state
+ * of the other is restored from its kernel stack.  The memory
+ * management hardware is updated to the second process's state.
+ * Finally, we can return to the second process.
+ * On entry, r3 points to the THREAD for the current task, r4
+ * points to the THREAD for the new task.
+ *
+ * This routine is always called with interrupts disabled.
+ *
+ * Note: there are two ways to get to the "going out" portion
+ * of this code; either by coming in via the entry (_switch)
+ * or via "fork" which must set up an environment equivalent
+ * to the "_switch" path.  If you change this , you'll have to
+ * change the fork code also.
+ *
+ * The code which creates the new task context is in 'copy_thread'
+ * in arch/ppc/kernel/process.c
+ */
+_GLOBAL(_switch)
+	stwu	r1,-INT_FRAME_SIZE(r1)
+	mflr	r0
+	stw	r0,INT_FRAME_SIZE+4(r1)
+	/* r3-r12 are caller saved -- Cort */
+	SAVE_NVGPRS(r1)
+	stw	r0,_NIP(r1)	/* Return to switch caller */
+	mfmsr	r11
+	li	r0,MSR_FP	/* Disable floating-point */
+#ifdef CONFIG_ALTIVEC
+BEGIN_FTR_SECTION
+	oris	r0,r0,MSR_VEC@h	/* Disable altivec */
+	mfspr	r12,SPRN_VRSAVE	/* save vrsave register value */
+	stw	r12,THREAD+THREAD_VRSAVE(r2)
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+	oris	r0,r0,MSR_SPE@h	 /* Disable SPE */
+	mfspr	r12,SPRN_SPEFSCR /* save spefscr register value */
+	stw	r12,THREAD+THREAD_SPEFSCR(r2)
+#endif /* CONFIG_SPE */
+	and.	r0,r0,r11	/* FP or altivec or SPE enabled? */
+	beq+	1f
+	andc	r11,r11,r0
+	MTMSRD(r11)
+	isync
+1:	stw	r11,_MSR(r1)
+	mfcr	r10
+	stw	r10,_CCR(r1)
+	stw	r1,KSP(r3)	/* Set old stack pointer */
+
+#ifdef CONFIG_SMP
+	/* We need a sync somewhere here to make sure that if the
+	 * previous task gets rescheduled on another CPU, it sees all
+	 * stores it has performed on this one.
+	 */
+	sync
+#endif /* CONFIG_SMP */
+
+	tophys(r0,r4)
+	CLR_TOP32(r0)
+	mtspr	SPRN_SPRG3,r0	/* Update current THREAD phys addr */
+	lwz	r1,KSP(r4)	/* Load new stack pointer */
+
+	/* save the old current 'last' for return value */
+	mr	r3,r2
+	addi	r2,r4,-THREAD	/* Update current */
+
+#ifdef CONFIG_ALTIVEC
+BEGIN_FTR_SECTION
+	lwz	r0,THREAD+THREAD_VRSAVE(r2)
+	mtspr	SPRN_VRSAVE,r0		/* if G4, restore VRSAVE reg */
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+	lwz	r0,THREAD+THREAD_SPEFSCR(r2)
+	mtspr	SPRN_SPEFSCR,r0		/* restore SPEFSCR reg */
+#endif /* CONFIG_SPE */
+
+	lwz	r0,_CCR(r1)
+	mtcrf	0xFF,r0
+	/* r3-r12 are destroyed -- Cort */
+	REST_NVGPRS(r1)
+
+	lwz	r4,_NIP(r1)	/* Return to _switch caller in new task */
+	mtlr	r4
+	addi	r1,r1,INT_FRAME_SIZE
+	blr
+
+	.globl	sigreturn_exit
+sigreturn_exit:
+	subi	r1,r3,STACK_FRAME_OVERHEAD
+	rlwinm	r12,r1,0,0,18	/* current_thread_info() */
+	lwz	r9,TI_FLAGS(r12)
+	andi.	r0,r9,_TIF_SYSCALL_TRACE
+	bnel-	do_syscall_trace
+	/* fall through */
+
+	.globl	ret_from_except_full
+ret_from_except_full:
+	REST_NVGPRS(r1)
+	/* fall through */
+
+	.globl	ret_from_except
+ret_from_except:
+	/* Hard-disable interrupts so that current_thread_info()->flags
+	 * can't change between when we test it and when we return
+	 * from the interrupt. */
+	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
+	SYNC			/* Some chip revs have problems here... */
+	MTMSRD(r10)		/* disable interrupts */
+
+	lwz	r3,_MSR(r1)	/* Returning to user mode? */
+	andi.	r0,r3,MSR_PR
+	beq	resume_kernel
+
+user_exc_return:		/* r10 contains MSR_KERNEL here */
+	/* Check current_thread_info()->flags */
+	rlwinm	r9,r1,0,0,18
+	lwz	r9,TI_FLAGS(r9)
+	andi.	r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED)
+	bne	do_work
+
+restore_user:
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+	/* Check whether this process has its own DBCR0 value.  The single
+	   step bit tells us that dbcr0 should be loaded. */
+	lwz	r0,THREAD+THREAD_DBCR0(r2)
+	andis.	r10,r0,DBCR0_IC@h
+	bnel-	load_dbcr0
+#endif
+
+#ifdef CONFIG_PREEMPT
+	b	restore
+
+/* N.B. the only way to get here is from the beq following ret_from_except. */
+resume_kernel:
+	/* check current_thread_info->preempt_count */
+	rlwinm	r9,r1,0,0,18
+	lwz	r0,TI_PREEMPT(r9)
+	cmpwi	0,r0,0		/* if non-zero, just restore regs and return */
+	bne	restore
+	lwz	r0,TI_FLAGS(r9)
+	andi.	r0,r0,_TIF_NEED_RESCHED
+	beq+	restore
+	andi.	r0,r3,MSR_EE	/* interrupts off? */
+	beq	restore		/* don't schedule if so */
+1:	bl	preempt_schedule_irq
+	rlwinm	r9,r1,0,0,18
+	lwz	r3,TI_FLAGS(r9)
+	andi.	r0,r3,_TIF_NEED_RESCHED
+	bne-	1b
+#else
+resume_kernel:
+#endif /* CONFIG_PREEMPT */
+
+	/* interrupts are hard-disabled at this point */
+restore:
+	lwz	r0,GPR0(r1)
+	lwz	r2,GPR2(r1)
+	REST_4GPRS(3, r1)
+	REST_2GPRS(7, r1)
+
+	lwz	r10,_XER(r1)
+	lwz	r11,_CTR(r1)
+	mtspr	SPRN_XER,r10
+	mtctr	r11
+
+	PPC405_ERR77(0,r1)
+	stwcx.	r0,0,r1			/* to clear the reservation */
+
+#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
+	lwz	r9,_MSR(r1)
+	andi.	r10,r9,MSR_RI		/* check if this exception occurred */
+	beql	nonrecoverable		/* at a bad place (MSR:RI = 0) */
+
+	lwz	r10,_CCR(r1)
+	lwz	r11,_LINK(r1)
+	mtcrf	0xFF,r10
+	mtlr	r11
+
+	/*
+	 * Once we put values in SRR0 and SRR1, we are in a state
+	 * where exceptions are not recoverable, since taking an
+	 * exception will trash SRR0 and SRR1.  Therefore we clear the
+	 * MSR:RI bit to indicate this.  If we do take an exception,
+	 * we can't return to the point of the exception but we
+	 * can restart the exception exit path at the label
+	 * exc_exit_restart below.  -- paulus
+	 */
+	LOAD_MSR_KERNEL(r10,MSR_KERNEL & ~MSR_RI)
+	SYNC
+	MTMSRD(r10)		/* clear the RI bit */
+	.globl exc_exit_restart
+exc_exit_restart:
+	lwz	r9,_MSR(r1)
+	lwz	r12,_NIP(r1)
+	FIX_SRR1(r9,r10)
+	mtspr	SPRN_SRR0,r12
+	mtspr	SPRN_SRR1,r9
+	REST_4GPRS(9, r1)
+	lwz	r1,GPR1(r1)
+	.globl exc_exit_restart_end
+exc_exit_restart_end:
+	SYNC
+	RFI
+
+#else /* !(CONFIG_4xx || CONFIG_BOOKE) */
+	/*
+	 * This is a bit different on 4xx/Book-E because it doesn't have
+	 * the RI bit in the MSR.
+	 * The TLB miss handler checks if we have interrupted
+	 * the exception exit path and restarts it if so
+	 * (well maybe one day it will... :).
+	 */
+	lwz	r11,_LINK(r1)
+	mtlr	r11
+	lwz	r10,_CCR(r1)
+	mtcrf	0xff,r10
+	REST_2GPRS(9, r1)
+	.globl exc_exit_restart
+exc_exit_restart:
+	lwz	r11,_NIP(r1)
+	lwz	r12,_MSR(r1)
+exc_exit_start:
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r12
+	REST_2GPRS(11, r1)
+	lwz	r1,GPR1(r1)
+	.globl exc_exit_restart_end
+exc_exit_restart_end:
+	PPC405_ERR77_SYNC
+	rfi
+	b	.			/* prevent prefetch past rfi */
+
+/*
+ * Returning from a critical interrupt in user mode doesn't need
+ * to be any different from a normal exception.  For a critical
+ * interrupt in the kernel, we just return (without checking for
+ * preemption) since the interrupt may have happened at some crucial
+ * place (e.g. inside the TLB miss handler), and because we will be
+ * running with r1 pointing into critical_stack, not the current
+ * process's kernel stack (and therefore current_thread_info() will
+ * give the wrong answer).
+ * We have to restore various SPRs that may have been in use at the
+ * time of the critical interrupt.
+ *
+ */
+	.globl	ret_from_crit_exc
+ret_from_crit_exc:
+	REST_NVGPRS(r1)
+	lwz	r3,_MSR(r1)
+	andi.	r3,r3,MSR_PR
+	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
+	bne	user_exc_return
+
+	lwz	r0,GPR0(r1)
+	lwz	r2,GPR2(r1)
+	REST_4GPRS(3, r1)
+	REST_2GPRS(7, r1)
+
+	lwz	r10,_XER(r1)
+	lwz	r11,_CTR(r1)
+	mtspr	SPRN_XER,r10
+	mtctr	r11
+
+	PPC405_ERR77(0,r1)
+	stwcx.	r0,0,r1			/* to clear the reservation */
+
+	lwz	r11,_LINK(r1)
+	mtlr	r11
+	lwz	r10,_CCR(r1)
+	mtcrf	0xff,r10
+#ifdef CONFIG_40x
+	/* avoid any possible TLB misses here by turning off MSR.DR, we
+	 * assume the instructions here are mapped by a pinned TLB entry */
+	li	r10,MSR_IR
+	mtmsr	r10
+	isync
+	tophys(r1, r1)
+#endif
+	lwz	r9,_DEAR(r1)
+	lwz	r10,_ESR(r1)
+	mtspr	SPRN_DEAR,r9
+	mtspr	SPRN_ESR,r10
+	lwz	r11,_NIP(r1)
+	lwz	r12,_MSR(r1)
+	mtspr	SPRN_CSRR0,r11
+	mtspr	SPRN_CSRR1,r12
+	lwz	r9,GPR9(r1)
+	lwz	r12,GPR12(r1)
+	lwz	r10,GPR10(r1)
+	lwz	r11,GPR11(r1)
+	lwz	r1,GPR1(r1)
+	PPC405_ERR77_SYNC
+	rfci
+	b	.		/* prevent prefetch past rfci */
+
+#ifdef CONFIG_BOOKE
+/*
+ * Return from a machine check interrupt, similar to a critical
+ * interrupt.
+ */
+	.globl	ret_from_mcheck_exc
+ret_from_mcheck_exc:
+	REST_NVGPRS(r1)
+	lwz	r3,_MSR(r1)
+	andi.	r3,r3,MSR_PR
+	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
+	bne	user_exc_return
+
+	lwz	r0,GPR0(r1)
+	lwz	r2,GPR2(r1)
+	REST_4GPRS(3, r1)
+	REST_2GPRS(7, r1)
+
+	lwz	r10,_XER(r1)
+	lwz	r11,_CTR(r1)
+	mtspr	SPRN_XER,r10
+	mtctr	r11
+
+	stwcx.	r0,0,r1			/* to clear the reservation */
+
+	lwz	r11,_LINK(r1)
+	mtlr	r11
+	lwz	r10,_CCR(r1)
+	mtcrf	0xff,r10
+	lwz	r9,_DEAR(r1)
+	lwz	r10,_ESR(r1)
+	mtspr	SPRN_DEAR,r9
+	mtspr	SPRN_ESR,r10
+	lwz	r11,_NIP(r1)
+	lwz	r12,_MSR(r1)
+	mtspr	SPRN_MCSRR0,r11
+	mtspr	SPRN_MCSRR1,r12
+	lwz	r9,GPR9(r1)
+	lwz	r12,GPR12(r1)
+	lwz	r10,GPR10(r1)
+	lwz	r11,GPR11(r1)
+	lwz	r1,GPR1(r1)
+	RFMCI
+#endif /* CONFIG_BOOKE */
+
+/*
+ * Load the DBCR0 value for a task that is being ptraced,
+ * having first saved away the global DBCR0.  Note that r0
+ * has the dbcr0 value to set upon entry to this.
+ */
+load_dbcr0:
+	mfmsr	r10		/* first disable debug exceptions */
+	rlwinm	r10,r10,0,~MSR_DE
+	mtmsr	r10
+	isync
+	mfspr	r10,SPRN_DBCR0
+	lis	r11,global_dbcr0@ha
+	addi	r11,r11,global_dbcr0@l
+	stw	r10,0(r11)
+	mtspr	SPRN_DBCR0,r0
+	lwz	r10,4(r11)
+	addi	r10,r10,1
+	stw	r10,4(r11)
+	li	r11,-1
+	mtspr	SPRN_DBSR,r11	/* clear all pending debug events */
+	blr
+
+	.comm	global_dbcr0,8
+#endif /* !(CONFIG_4xx || CONFIG_BOOKE) */
+
+do_work:			/* r10 contains MSR_KERNEL here */
+	andi.	r0,r9,_TIF_NEED_RESCHED
+	beq	do_user_signal
+
+do_resched:			/* r10 contains MSR_KERNEL here */
+	ori	r10,r10,MSR_EE
+	SYNC
+	MTMSRD(r10)		/* hard-enable interrupts */
+	bl	schedule
+recheck:
+	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
+	SYNC
+	MTMSRD(r10)		/* disable interrupts */
+	rlwinm	r9,r1,0,0,18
+	lwz	r9,TI_FLAGS(r9)
+	andi.	r0,r9,_TIF_NEED_RESCHED
+	bne-	do_resched
+	andi.	r0,r9,_TIF_SIGPENDING
+	beq	restore_user
+do_user_signal:			/* r10 contains MSR_KERNEL here */
+	ori	r10,r10,MSR_EE
+	SYNC
+	MTMSRD(r10)		/* hard-enable interrupts */
+	/* save r13-r31 in the exception frame, if not already done */
+	lwz	r3,TRAP(r1)
+	andi.	r0,r3,1
+	beq	2f
+	SAVE_NVGPRS(r1)
+	rlwinm	r3,r3,0,0,30
+	stw	r3,TRAP(r1)
+2:	li	r3,0
+	addi	r4,r1,STACK_FRAME_OVERHEAD
+	bl	do_signal
+	REST_NVGPRS(r1)
+	b	recheck
+
+/*
+ * We come here when we are at the end of handling an exception
+ * that occurred at a place where taking an exception will lose
+ * state information, such as the contents of SRR0 and SRR1.
+ */
+nonrecoverable:
+	lis	r10,exc_exit_restart_end@ha
+	addi	r10,r10,exc_exit_restart_end@l
+	cmplw	r12,r10
+	bge	3f
+	lis	r11,exc_exit_restart@ha
+	addi	r11,r11,exc_exit_restart@l
+	cmplw	r12,r11
+	blt	3f
+	lis	r10,ee_restarts@ha
+	lwz	r12,ee_restarts@l(r10)
+	addi	r12,r12,1
+	stw	r12,ee_restarts@l(r10)
+	mr	r12,r11		/* restart at exc_exit_restart */
+	blr
+3:	/* OK, we can't recover, kill this process */
+	/* but the 601 doesn't implement the RI bit, so assume it's OK */
+BEGIN_FTR_SECTION
+	blr
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+	lwz	r3,TRAP(r1)
+	andi.	r0,r3,1
+	beq	4f
+	SAVE_NVGPRS(r1)
+	rlwinm	r3,r3,0,0,30
+	stw	r3,TRAP(r1)
+4:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	nonrecoverable_exception
+	/* shouldn't return */
+	b	4b
+
+	.comm	ee_restarts,4
+
+/*
+ * PROM code for specific machines follows.  Put it
+ * here so it's easy to add arch-specific sections later.
+ * -- Cort
+ */
+#ifdef CONFIG_PPC_OF
+/*
+ * On CHRP, the Run-Time Abstraction Services (RTAS) have to be
+ * called with the MMU off.
+ */
+_GLOBAL(enter_rtas)
+	stwu	r1,-INT_FRAME_SIZE(r1)
+	mflr	r0
+	stw	r0,INT_FRAME_SIZE+4(r1)
+	lis	r4,rtas_data@ha
+	lwz	r4,rtas_data@l(r4)
+	lis	r6,1f@ha	/* physical return address for rtas */
+	addi	r6,r6,1f@l
+	tophys(r6,r6)
+	tophys(r7,r1)
+	lis	r8,rtas_entry@ha
+	lwz	r8,rtas_entry@l(r8)
+	mfmsr	r9
+	stw	r9,8(r1)
+	LOAD_MSR_KERNEL(r0,MSR_KERNEL)
+	SYNC			/* disable interrupts so SRR0/1 */
+	MTMSRD(r0)		/* don't get trashed */
+	li	r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
+	mtlr	r6
+	CLR_TOP32(r7)
+	mtspr	SPRN_SPRG2,r7
+	mtspr	SPRN_SRR0,r8
+	mtspr	SPRN_SRR1,r9
+	RFI
+1:	tophys(r9,r1)
+	lwz	r8,INT_FRAME_SIZE+4(r9)	/* get return address */
+	lwz	r9,8(r9)	/* original msr value */
+	FIX_SRR1(r9,r0)
+	addi	r1,r1,INT_FRAME_SIZE
+	li	r0,0
+	mtspr	SPRN_SPRG2,r0
+	mtspr	SPRN_SRR0,r8
+	mtspr	SPRN_SRR1,r9
+	RFI			/* return to caller */
+
+	.globl	machine_check_in_rtas
+machine_check_in_rtas:
+	twi	31,0,0
+	/* XXX load up BATs and panic */
+
+#endif /* CONFIG_PPC_OF */
diff --git a/arch/ppc/kernel/find_name.c b/arch/ppc/kernel/find_name.c
new file mode 100644
index 00000000000..3c0fa8e0c07
--- /dev/null
+++ b/arch/ppc/kernel/find_name.c
@@ -0,0 +1,48 @@
+#include <stdio.h>
+#include <asm/page.h>
+#include <sys/mman.h>
+#include <strings.h>
+/*
+ * Finds a given address in the System.map and prints it out
+ * with its neighbors.  -- Cort
+ */
+
+int main(int argc, char **argv)
+{
+	unsigned long addr, cmp, i;
+	FILE *f;
+	char s[256], last[256];
+	
+	if ( argc < 2 )
+	{
+		fprintf(stderr, "Usage: %s <address>\n", argv[0]);
+		return -1;
+	}
+
+	for ( i = 1 ; argv[i] ; i++ )
+	{
+		sscanf( argv[i], "%0lx", &addr );
+		/* adjust if addr is relative to kernelbase */
+		if ( addr < PAGE_OFFSET )
+			addr += PAGE_OFFSET;
+		
+		if ( (f = fopen( "System.map", "r" )) == NULL )
+		{
+			perror("fopen()\n");
+			exit(-1);
+		}
+		
+		while ( !feof(f) )
+		{
+			fgets(s, 255 , f);
+			sscanf( s, "%0lx", &cmp );
+			if ( addr < cmp )
+				break;
+			strcpy( last, s);
+		}
+		
+		printf( "%s%s", last, s );
+	}		
+	fclose(f);
+	return 0;
+}
diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S
new file mode 100644
index 00000000000..1a89a71e0ac
--- /dev/null
+++ b/arch/ppc/kernel/head.S
@@ -0,0 +1,1710 @@
+/*
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *  Adapted for Power Macintosh by Paul Mackerras.
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *  MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  This file contains the low-level support and setup for the
+ *  PowerPC platform, including trap and interrupt dispatch.
+ *  (The PPC 8xx embedded CPUs use head_8xx.S instead.)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/offsets.h>
+
+#ifdef CONFIG_APUS
+#include <asm/amigappc.h>
+#endif
+
+#ifdef CONFIG_PPC64BRIDGE
+#define LOAD_BAT(n, reg, RA, RB)	\
+	ld	RA,(n*32)+0(reg);	\
+	ld	RB,(n*32)+8(reg);	\
+	mtspr	SPRN_IBAT##n##U,RA;	\
+	mtspr	SPRN_IBAT##n##L,RB;	\
+	ld	RA,(n*32)+16(reg);	\
+	ld	RB,(n*32)+24(reg);	\
+	mtspr	SPRN_DBAT##n##U,RA;	\
+	mtspr	SPRN_DBAT##n##L,RB;	\
+
+#else /* CONFIG_PPC64BRIDGE */
+
+/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
+#define LOAD_BAT(n, reg, RA, RB)	\
+	/* see the comment for clear_bats() -- Cort */ \
+	li	RA,0;			\
+	mtspr	SPRN_IBAT##n##U,RA;	\
+	mtspr	SPRN_DBAT##n##U,RA;	\
+	lwz	RA,(n*16)+0(reg);	\
+	lwz	RB,(n*16)+4(reg);	\
+	mtspr	SPRN_IBAT##n##U,RA;	\
+	mtspr	SPRN_IBAT##n##L,RB;	\
+	beq	1f;			\
+	lwz	RA,(n*16)+8(reg);	\
+	lwz	RB,(n*16)+12(reg);	\
+	mtspr	SPRN_DBAT##n##U,RA;	\
+	mtspr	SPRN_DBAT##n##L,RB;	\
+1:
+#endif /* CONFIG_PPC64BRIDGE */
+
+	.text
+	.stabs	"arch/ppc/kernel/",N_SO,0,0,0f
+	.stabs	"head.S",N_SO,0,0,0f
+0:
+	.globl	_stext
+_stext:
+
+/*
+ * _start is defined this way because the XCOFF loader in the OpenFirmware
+ * on the powermac expects the entry point to be a procedure descriptor.
+ */
+	.text
+	.globl	_start
+_start:
+	/*
+	 * These are here for legacy reasons, the kernel used to
+	 * need to look like a coff function entry for the pmac
+	 * but we're always started by some kind of bootloader now.
+	 *  -- Cort
+	 */
+	nop	/* used by __secondary_hold on prep (mtx) and chrp smp */
+	nop	/* used by __secondary_hold on prep (mtx) and chrp smp */
+	nop
+
+/* PMAC
+ * Enter here with the kernel text, data and bss loaded starting at
+ * 0, running with virtual == physical mapping.
+ * r5 points to the prom entry point (the client interface handler
+ * address).  Address translation is turned on, with the prom
+ * managing the hash table.  Interrupts are disabled.  The stack
+ * pointer (r1) points to just below the end of the half-meg region
+ * from 0x380000 - 0x400000, which is mapped in already.
+ *
+ * If we are booted from MacOS via BootX, we enter with the kernel
+ * image loaded somewhere, and the following values in registers:
+ *  r3: 'BooX' (0x426f6f58)
+ *  r4: virtual address of boot_infos_t
+ *  r5: 0
+ *
+ * APUS
+ *   r3: 'APUS'
+ *   r4: physical address of memory base
+ *   Linux/m68k style BootInfo structure at &_end.
+ *
+ * PREP
+ * This is jumped to on prep systems right after the kernel is relocated
+ * to its proper place in memory by the boot loader.  The expected layout
+ * of the regs is:
+ *   r3: ptr to residual data
+ *   r4: initrd_start or if no initrd then 0
+ *   r5: initrd_end - unused if r4 is 0
+ *   r6: Start of command line string
+ *   r7: End of command line string
+ *
+ * This just gets a minimal mmu environment setup so we can call
+ * start_here() to do the real work.
+ * -- Cort
+ */
+
+	.globl	__start
+__start:
+/*
+ * We have to do any OF calls before we map ourselves to KERNELBASE,
+ * because OF may have I/O devices mapped into that area
+ * (particularly on CHRP).
+ */
+	mr	r31,r3			/* save parameters */
+	mr	r30,r4
+	mr	r29,r5
+	mr	r28,r6
+	mr	r27,r7
+	li	r24,0			/* cpu # */
+
+/*
+ * early_init() does the early machine identification and does
+ * the necessary low-level setup and clears the BSS
+ *  -- Cort <cort@fsmlabs.com>
+ */
+	bl	early_init
+
+/*
+ * On POWER4, we first need to tweak some CPU configuration registers
+ * like real mode cache inhibit or exception base
+ */
+#ifdef CONFIG_POWER4
+	bl	__970_cpu_preinit
+#endif /* CONFIG_POWER4 */
+
+#ifdef CONFIG_APUS
+/* On APUS the __va/__pa constants need to be set to the correct
+ * values before continuing.
+ */
+	mr	r4,r30
+	bl	fix_mem_constants
+#endif /* CONFIG_APUS */
+
+/* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains
+ * the physical address we are running at, returned by early_init()
+ */
+ 	bl	mmu_off
+__after_mmu_off:
+#ifndef CONFIG_POWER4
+	bl	clear_bats
+	bl	flush_tlbs
+
+	bl	initial_bats
+#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
+	bl	setup_disp_bat
+#endif
+#else /* CONFIG_POWER4 */
+	bl	reloc_offset
+	bl	initial_mm_power4
+#endif /* CONFIG_POWER4 */
+
+/*
+ * Call setup_cpu for CPU 0 and initialize 6xx Idle
+ */
+	bl	reloc_offset
+	li	r24,0			/* cpu# */
+	bl	call_setup_cpu		/* Call setup_cpu for this CPU */
+#ifdef CONFIG_6xx
+	bl	reloc_offset
+	bl	init_idle_6xx
+#endif /* CONFIG_6xx */
+#ifdef CONFIG_POWER4
+	bl	reloc_offset
+	bl	init_idle_power4
+#endif /* CONFIG_POWER4 */
+
+
+#ifndef CONFIG_APUS
+/*
+ * We need to run with _start at physical address 0.
+ * On CHRP, we are loaded at 0x10000 since OF on CHRP uses
+ * the exception vectors at 0 (and therefore this copy
+ * overwrites OF's exception vectors with our own).
+ * If the MMU is already turned on, we copy stuff to KERNELBASE,
+ * otherwise we copy it to 0.
+ */
+	bl	reloc_offset
+	mr	r26,r3
+	addis	r4,r3,KERNELBASE@h	/* current address of _start */
+	cmpwi	0,r4,0			/* are we already running at 0? */
+	bne	relocate_kernel
+#endif /* CONFIG_APUS */
+/*
+ * we now have the 1st 16M of ram mapped with the bats.
+ * prep needs the mmu to be turned on here, but pmac already has it on.
+ * this shouldn't bother the pmac since it just gets turned on again
+ * as we jump to our code at KERNELBASE. -- Cort
+ * Actually no, pmac doesn't have it on any more. BootX enters with MMU
+ * off, and in other cases, we now turn it off before changing BATs above.
+ */
+turn_on_mmu:
+	mfmsr	r0
+	ori	r0,r0,MSR_DR|MSR_IR
+	mtspr	SPRN_SRR1,r0
+	lis	r0,start_here@h
+	ori	r0,r0,start_here@l
+	mtspr	SPRN_SRR0,r0
+	SYNC
+	RFI				/* enables MMU */
+
+/*
+ * We need __secondary_hold as a place to hold the other cpus on
+ * an SMP machine, even when we are running a UP kernel.
+ */
+	. = 0xc0			/* for prep bootloader */
+	li	r3,1			/* MTX only has 1 cpu */
+	.globl	__secondary_hold
+__secondary_hold:
+	/* tell the master we're here */
+	stw	r3,4(0)
+#ifdef CONFIG_SMP
+100:	lwz	r4,0(0)
+	/* wait until we're told to start */
+	cmpw	0,r4,r3
+	bne	100b
+	/* our cpu # was at addr 0 - go */
+	mr	r24,r3			/* cpu # */
+	b	__secondary_start
+#else
+	b	.
+#endif /* CONFIG_SMP */
+
+/*
+ * Exception entry code.  This code runs with address translation
+ * turned off, i.e. using physical addresses.
+ * We assume sprg3 has the physical address of the current
+ * task's thread_struct.
+ */
+#define EXCEPTION_PROLOG	\
+	mtspr	SPRN_SPRG0,r10;	\
+	mtspr	SPRN_SPRG1,r11;	\
+	mfcr	r10;		\
+	EXCEPTION_PROLOG_1;	\
+	EXCEPTION_PROLOG_2
+
+#define EXCEPTION_PROLOG_1	\
+	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel */ \
+	andi.	r11,r11,MSR_PR;	\
+	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
+	beq	1f;		\
+	mfspr	r11,SPRN_SPRG3;	\
+	lwz	r11,THREAD_INFO-THREAD(r11);	\
+	addi	r11,r11,THREAD_SIZE;	\
+	tophys(r11,r11);	\
+1:	subi	r11,r11,INT_FRAME_SIZE	/* alloc exc. frame */
+
+
+#define EXCEPTION_PROLOG_2	\
+	CLR_TOP32(r11);		\
+	stw	r10,_CCR(r11);		/* save registers */ \
+	stw	r12,GPR12(r11);	\
+	stw	r9,GPR9(r11);	\
+	mfspr	r10,SPRN_SPRG0;	\
+	stw	r10,GPR10(r11);	\
+	mfspr	r12,SPRN_SPRG1;	\
+	stw	r12,GPR11(r11);	\
+	mflr	r10;		\
+	stw	r10,_LINK(r11);	\
+	mfspr	r12,SPRN_SRR0;	\
+	mfspr	r9,SPRN_SRR1;	\
+	stw	r1,GPR1(r11);	\
+	stw	r1,0(r11);	\
+	tovirt(r1,r11);			/* set new kernel sp */	\
+	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
+	MTMSRD(r10);			/* (except for mach check in rtas) */ \
+	stw	r0,GPR0(r11);	\
+	SAVE_4GPRS(3, r11);	\
+	SAVE_2GPRS(7, r11)
+
+/*
+ * Note: code which follows this uses cr0.eq (set if from kernel),
+ * r11, r12 (SRR0), and r9 (SRR1).
+ *
+ * Note2: once we have set r1 we are in a position to take exceptions
+ * again, and we could thus set MSR:RI at that point.
+ */
+
+/*
+ * Exception vectors.
+ */
+#define EXCEPTION(n, label, hdlr, xfer)		\
+	. = n;					\
+label:						\
+	EXCEPTION_PROLOG;			\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
+	xfer(n, hdlr)
+
+#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret)	\
+	li	r10,trap;					\
+	stw	r10,TRAP(r11);					\
+	li	r10,MSR_KERNEL;					\
+	copyee(r10, r9);					\
+	bl	tfer;						\
+i##n:								\
+	.long	hdlr;						\
+	.long	ret
+
+#define COPY_EE(d, s)		rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
+			  ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
+			  ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
+			  ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr)	\
+	EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
+			  ret_from_except)
+
+/* System reset */
+/* core99 pmac starts the seconary here by changing the vector, and
+   putting it back to what it was (UnknownException) when done.  */
+#if defined(CONFIG_GEMINI) && defined(CONFIG_SMP)
+	. = 0x100
+	b	__secondary_start_gemini
+#else
+	EXCEPTION(0x100, Reset, UnknownException, EXC_XFER_STD)
+#endif
+
+/* Machine check */
+/*
+ * On CHRP, this is complicated by the fact that we could get a
+ * machine check inside RTAS, and we have no guarantee that certain
+ * critical registers will have the values we expect.  The set of
+ * registers that might have bad values includes all the GPRs
+ * and all the BATs.  We indicate that we are in RTAS by putting
+ * a non-zero value, the address of the exception frame to use,
+ * in SPRG2.  The machine check handler checks SPRG2 and uses its
+ * value if it is non-zero.  If we ever needed to free up SPRG2,
+ * we could use a field in the thread_info or thread_struct instead.
+ * (Other exception handlers assume that r1 is a valid kernel stack
+ * pointer when we take an exception from supervisor mode.)
+ *	-- paulus.
+ */
+	. = 0x200
+	mtspr	SPRN_SPRG0,r10
+	mtspr	SPRN_SPRG1,r11
+	mfcr	r10
+#ifdef CONFIG_PPC_CHRP
+	mfspr	r11,SPRN_SPRG2
+	cmpwi	0,r11,0
+	bne	7f
+#endif /* CONFIG_PPC_CHRP */
+	EXCEPTION_PROLOG_1
+7:	EXCEPTION_PROLOG_2
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+#ifdef CONFIG_PPC_CHRP
+	mfspr	r4,SPRN_SPRG2
+	cmpwi	cr1,r4,0
+	bne	cr1,1f
+#endif
+	EXC_XFER_STD(0x200, MachineCheckException)
+#ifdef CONFIG_PPC_CHRP
+1:	b	machine_check_in_rtas
+#endif
+
+/* Data access exception. */
+	. = 0x300
+#ifdef CONFIG_PPC64BRIDGE
+	b	DataAccess
+DataAccessCont:
+#else
+DataAccess:
+	EXCEPTION_PROLOG
+#endif /* CONFIG_PPC64BRIDGE */
+	mfspr	r10,SPRN_DSISR
+	andis.	r0,r10,0xa470		/* weird error? */
+	bne	1f			/* if not, try to put a PTE */
+	mfspr	r4,SPRN_DAR		/* into the hash table */
+	rlwinm	r3,r10,32-15,21,21	/* DSISR_STORE -> _PAGE_RW */
+	bl	hash_page
+1:	stw	r10,_DSISR(r11)
+	mr	r5,r10
+	mfspr	r4,SPRN_DAR
+	EXC_XFER_EE_LITE(0x300, handle_page_fault)
+
+#ifdef CONFIG_PPC64BRIDGE
+/* SLB fault on data access. */
+	. = 0x380
+	b	DataSegment
+#endif /* CONFIG_PPC64BRIDGE */
+
+/* Instruction access exception. */
+	. = 0x400
+#ifdef CONFIG_PPC64BRIDGE
+	b	InstructionAccess
+InstructionAccessCont:
+#else
+InstructionAccess:
+	EXCEPTION_PROLOG
+#endif /* CONFIG_PPC64BRIDGE */
+	andis.	r0,r9,0x4000		/* no pte found? */
+	beq	1f			/* if so, try to put a PTE */
+	li	r3,0			/* into the hash table */
+	mr	r4,r12			/* SRR0 is fault address */
+	bl	hash_page
+1:	mr	r4,r12
+	mr	r5,r9
+	EXC_XFER_EE_LITE(0x400, handle_page_fault)
+
+#ifdef CONFIG_PPC64BRIDGE
+/* SLB fault on instruction access. */
+	. = 0x480
+	b	InstructionSegment
+#endif /* CONFIG_PPC64BRIDGE */
+
+/* External interrupt */
+	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
+
+/* Alignment exception */
+	. = 0x600
+Alignment:
+	EXCEPTION_PROLOG
+	mfspr	r4,SPRN_DAR
+	stw	r4,_DAR(r11)
+	mfspr	r5,SPRN_DSISR
+	stw	r5,_DSISR(r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE(0x600, AlignmentException)
+
+/* Program check exception */
+	EXCEPTION(0x700, ProgramCheck, ProgramCheckException, EXC_XFER_STD)
+
+/* Floating-point unavailable */
+	. = 0x800
+FPUnavailable:
+	EXCEPTION_PROLOG
+	bne	load_up_fpu		/* if from user, just load it up */
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE_LITE(0x800, KernelFP)
+
+/* Decrementer */
+	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
+
+	EXCEPTION(0xa00, Trap_0a, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0xb00, Trap_0b, UnknownException, EXC_XFER_EE)
+
+/* System call */
+	. = 0xc00
+SystemCall:
+	EXCEPTION_PROLOG
+	EXC_XFER_EE_LITE(0xc00, DoSyscall)
+
+/* Single step - not used on 601 */
+	EXCEPTION(0xd00, SingleStep, SingleStepException, EXC_XFER_STD)
+	EXCEPTION(0xe00, Trap_0e, UnknownException, EXC_XFER_EE)
+
+/*
+ * The Altivec unavailable trap is at 0x0f20.  Foo.
+ * We effectively remap it to 0x3000.
+ * We include an altivec unavailable exception vector even if
+ * not configured for Altivec, so that you can't panic a
+ * non-altivec kernel running on a machine with altivec just
+ * by executing an altivec instruction.
+ */
+	. = 0xf00
+	b	Trap_0f
+
+	. = 0xf20
+	b	AltiVecUnavailable
+
+Trap_0f:
+	EXCEPTION_PROLOG
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE(0xf00, UnknownException)
+
+/*
+ * Handle TLB miss for instruction on 603/603e.
+ * Note: we get an alternate set of r0 - r3 to use automatically.
+ */
+	. = 0x1000
+InstructionTLBMiss:
+/*
+ * r0:	stored ctr
+ * r1:	linux style pte ( later becomes ppc hardware pte )
+ * r2:	ptr to linux-style pte
+ * r3:	scratch
+ */
+	mfctr	r0
+	/* Get PTE (linux-style) and check access */
+	mfspr	r3,SPRN_IMISS
+	lis	r1,KERNELBASE@h		/* check if kernel address */
+	cmplw	0,r3,r1
+	mfspr	r2,SPRN_SPRG3
+	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
+	lwz	r2,PGDIR(r2)
+	blt+	112f
+	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
+	addi	r2,r2,swapper_pg_dir@l	/* kernel page table */
+	mfspr	r1,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
+	rlwinm	r1,r1,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
+112:	tophys(r2,r2)
+	rlwimi	r2,r3,12,20,29		/* insert top 10 bits of address */
+	lwz	r2,0(r2)		/* get pmd entry */
+	rlwinm.	r2,r2,0,0,19		/* extract address of pte page */
+	beq-	InstructionAddressInvalid	/* return if no mapping */
+	rlwimi	r2,r3,22,20,29		/* insert next 10 bits of address */
+	lwz	r3,0(r2)		/* get linux-style pte */
+	andc.	r1,r1,r3		/* check access & ~permission */
+	bne-	InstructionAddressInvalid /* return if access not permitted */
+	ori	r3,r3,_PAGE_ACCESSED	/* set _PAGE_ACCESSED in pte */
+	/*
+	 * NOTE! We are assuming this is not an SMP system, otherwise
+	 * we would need to update the pte atomically with lwarx/stwcx.
+	 */
+	stw	r3,0(r2)		/* update PTE (accessed bit) */
+	/* Convert linux-style PTE to low word of PPC-style PTE */
+	rlwinm	r1,r3,32-10,31,31	/* _PAGE_RW -> PP lsb */
+	rlwinm	r2,r3,32-7,31,31	/* _PAGE_DIRTY -> PP lsb */
+	and	r1,r1,r2		/* writable if _RW and _DIRTY */
+	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
+	rlwimi	r3,r3,32-1,31,31	/* _PAGE_USER -> PP lsb */
+	ori	r1,r1,0xe14		/* clear out reserved bits and M */
+	andc	r1,r3,r1		/* PP = user? (rw&dirty? 2: 3): 0 */
+	mtspr	SPRN_RPA,r1
+	mfspr	r3,SPRN_IMISS
+	tlbli	r3
+	mfspr	r3,SPRN_SRR1		/* Need to restore CR0 */
+	mtcrf	0x80,r3
+	rfi
+InstructionAddressInvalid:
+	mfspr	r3,SPRN_SRR1
+	rlwinm	r1,r3,9,6,6	/* Get load/store bit */
+
+	addis	r1,r1,0x2000
+	mtspr	SPRN_DSISR,r1	/* (shouldn't be needed) */
+	mtctr	r0		/* Restore CTR */
+	andi.	r2,r3,0xFFFF	/* Clear upper bits of SRR1 */
+	or	r2,r2,r1
+	mtspr	SPRN_SRR1,r2
+	mfspr	r1,SPRN_IMISS	/* Get failing address */
+	rlwinm.	r2,r2,0,31,31	/* Check for little endian access */
+	rlwimi	r2,r2,1,30,30	/* change 1 -> 3 */
+	xor	r1,r1,r2
+	mtspr	SPRN_DAR,r1	/* Set fault address */
+	mfmsr	r0		/* Restore "normal" registers */
+	xoris	r0,r0,MSR_TGPR>>16
+	mtcrf	0x80,r3		/* Restore CR0 */
+	mtmsr	r0
+	b	InstructionAccess
+
+/*
+ * Handle TLB miss for DATA Load operation on 603/603e
+ */
+	. = 0x1100
+DataLoadTLBMiss:
+/*
+ * r0:	stored ctr
+ * r1:	linux style pte ( later becomes ppc hardware pte )
+ * r2:	ptr to linux-style pte
+ * r3:	scratch
+ */
+	mfctr	r0
+	/* Get PTE (linux-style) and check access */
+	mfspr	r3,SPRN_DMISS
+	lis	r1,KERNELBASE@h		/* check if kernel address */
+	cmplw	0,r3,r1
+	mfspr	r2,SPRN_SPRG3
+	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
+	lwz	r2,PGDIR(r2)
+	blt+	112f
+	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
+	addi	r2,r2,swapper_pg_dir@l	/* kernel page table */
+	mfspr	r1,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
+	rlwinm	r1,r1,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
+112:	tophys(r2,r2)
+	rlwimi	r2,r3,12,20,29		/* insert top 10 bits of address */
+	lwz	r2,0(r2)		/* get pmd entry */
+	rlwinm.	r2,r2,0,0,19		/* extract address of pte page */
+	beq-	DataAddressInvalid	/* return if no mapping */
+	rlwimi	r2,r3,22,20,29		/* insert next 10 bits of address */
+	lwz	r3,0(r2)		/* get linux-style pte */
+	andc.	r1,r1,r3		/* check access & ~permission */
+	bne-	DataAddressInvalid	/* return if access not permitted */
+	ori	r3,r3,_PAGE_ACCESSED	/* set _PAGE_ACCESSED in pte */
+	/*
+	 * NOTE! We are assuming this is not an SMP system, otherwise
+	 * we would need to update the pte atomically with lwarx/stwcx.
+	 */
+	stw	r3,0(r2)		/* update PTE (accessed bit) */
+	/* Convert linux-style PTE to low word of PPC-style PTE */
+	rlwinm	r1,r3,32-10,31,31	/* _PAGE_RW -> PP lsb */
+	rlwinm	r2,r3,32-7,31,31	/* _PAGE_DIRTY -> PP lsb */
+	and	r1,r1,r2		/* writable if _RW and _DIRTY */
+	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
+	rlwimi	r3,r3,32-1,31,31	/* _PAGE_USER -> PP lsb */
+	ori	r1,r1,0xe14		/* clear out reserved bits and M */
+	andc	r1,r3,r1		/* PP = user? (rw&dirty? 2: 3): 0 */
+	mtspr	SPRN_RPA,r1
+	mfspr	r3,SPRN_DMISS
+	tlbld	r3
+	mfspr	r3,SPRN_SRR1		/* Need to restore CR0 */
+	mtcrf	0x80,r3
+	rfi
+DataAddressInvalid:
+	mfspr	r3,SPRN_SRR1
+	rlwinm	r1,r3,9,6,6	/* Get load/store bit */
+	addis	r1,r1,0x2000
+	mtspr	SPRN_DSISR,r1
+	mtctr	r0		/* Restore CTR */
+	andi.	r2,r3,0xFFFF	/* Clear upper bits of SRR1 */
+	mtspr	SPRN_SRR1,r2
+	mfspr	r1,SPRN_DMISS	/* Get failing address */
+	rlwinm.	r2,r2,0,31,31	/* Check for little endian access */
+	beq	20f		/* Jump if big endian */
+	xori	r1,r1,3
+20:	mtspr	SPRN_DAR,r1	/* Set fault address */
+	mfmsr	r0		/* Restore "normal" registers */
+	xoris	r0,r0,MSR_TGPR>>16
+	mtcrf	0x80,r3		/* Restore CR0 */
+	mtmsr	r0
+	b	DataAccess
+
+/*
+ * Handle TLB miss for DATA Store on 603/603e
+ */
+	. = 0x1200
+DataStoreTLBMiss:
+/*
+ * r0:	stored ctr
+ * r1:	linux style pte ( later becomes ppc hardware pte )
+ * r2:	ptr to linux-style pte
+ * r3:	scratch
+ */
+	mfctr	r0
+	/* Get PTE (linux-style) and check access */
+	mfspr	r3,SPRN_DMISS
+	lis	r1,KERNELBASE@h		/* check if kernel address */
+	cmplw	0,r3,r1
+	mfspr	r2,SPRN_SPRG3
+	li	r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
+	lwz	r2,PGDIR(r2)
+	blt+	112f
+	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
+	addi	r2,r2,swapper_pg_dir@l	/* kernel page table */
+	mfspr	r1,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
+	rlwinm	r1,r1,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
+112:	tophys(r2,r2)
+	rlwimi	r2,r3,12,20,29		/* insert top 10 bits of address */
+	lwz	r2,0(r2)		/* get pmd entry */
+	rlwinm.	r2,r2,0,0,19		/* extract address of pte page */
+	beq-	DataAddressInvalid	/* return if no mapping */
+	rlwimi	r2,r3,22,20,29		/* insert next 10 bits of address */
+	lwz	r3,0(r2)		/* get linux-style pte */
+	andc.	r1,r1,r3		/* check access & ~permission */
+	bne-	DataAddressInvalid	/* return if access not permitted */
+	ori	r3,r3,_PAGE_ACCESSED|_PAGE_DIRTY
+	/*
+	 * NOTE! We are assuming this is not an SMP system, otherwise
+	 * we would need to update the pte atomically with lwarx/stwcx.
+	 */
+	stw	r3,0(r2)		/* update PTE (accessed/dirty bits) */
+	/* Convert linux-style PTE to low word of PPC-style PTE */
+	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
+	li	r1,0xe15		/* clear out reserved bits and M */
+	andc	r1,r3,r1		/* PP = user? 2: 0 */
+	mtspr	SPRN_RPA,r1
+	mfspr	r3,SPRN_DMISS
+	tlbld	r3
+	mfspr	r3,SPRN_SRR1		/* Need to restore CR0 */
+	mtcrf	0x80,r3
+	rfi
+
+#ifndef CONFIG_ALTIVEC
+#define AltivecAssistException	UnknownException
+#endif
+
+	EXCEPTION(0x1300, Trap_13, InstructionBreakpoint, EXC_XFER_EE)
+	EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE)
+	EXCEPTION(0x1500, Trap_15, UnknownException, EXC_XFER_EE)
+#ifdef CONFIG_POWER4
+	EXCEPTION(0x1600, Trap_16, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1700, Trap_17, AltivecAssistException, EXC_XFER_EE)
+	EXCEPTION(0x1800, Trap_18, TAUException, EXC_XFER_STD)
+#else /* !CONFIG_POWER4 */
+	EXCEPTION(0x1600, Trap_16, AltivecAssistException, EXC_XFER_EE)
+	EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD)
+	EXCEPTION(0x1800, Trap_18, UnknownException, EXC_XFER_EE)
+#endif /* CONFIG_POWER4 */
+	EXCEPTION(0x1900, Trap_19, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1a00, Trap_1a, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1b00, Trap_1b, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1c00, Trap_1c, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1d00, Trap_1d, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1e00, Trap_1e, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1f00, Trap_1f, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2000, RunMode, RunModeException, EXC_XFER_EE)
+	EXCEPTION(0x2100, Trap_21, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2200, Trap_22, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2300, Trap_23, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2400, Trap_24, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2500, Trap_25, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2600, Trap_26, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2700, Trap_27, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2800, Trap_28, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2900, Trap_29, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2a00, Trap_2a, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2b00, Trap_2b, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2c00, Trap_2c, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2d00, Trap_2d, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2e00, Trap_2e, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2f00, MOLTrampoline, UnknownException, EXC_XFER_EE_LITE)
+
+	.globl mol_trampoline
+	.set mol_trampoline, i0x2f00
+
+	. = 0x3000
+
+AltiVecUnavailable:
+	EXCEPTION_PROLOG
+#ifdef CONFIG_ALTIVEC
+	bne	load_up_altivec		/* if from user, just load it up */
+#endif /* CONFIG_ALTIVEC */
+	EXC_XFER_EE_LITE(0xf20, AltivecUnavailException)
+
+#ifdef CONFIG_PPC64BRIDGE
+DataAccess:
+	EXCEPTION_PROLOG
+	b	DataAccessCont
+
+InstructionAccess:
+	EXCEPTION_PROLOG
+	b	InstructionAccessCont
+
+DataSegment:
+	EXCEPTION_PROLOG
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	mfspr	r4,SPRN_DAR
+	stw	r4,_DAR(r11)
+	EXC_XFER_STD(0x380, UnknownException)
+
+InstructionSegment:
+	EXCEPTION_PROLOG
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_STD(0x480, UnknownException)
+#endif /* CONFIG_PPC64BRIDGE */
+
+/*
+ * This task wants to use the FPU now.
+ * On UP, disable FP for the task which had the FPU previously,
+ * and save its floating-point registers in its thread_struct.
+ * Load up this task's FP registers from its thread_struct,
+ * enable the FPU for the current task and return to the task.
+ */
+load_up_fpu:
+	mfmsr	r5
+	ori	r5,r5,MSR_FP
+#ifdef CONFIG_PPC64BRIDGE
+	clrldi	r5,r5,1			/* turn off 64-bit mode */
+#endif /* CONFIG_PPC64BRIDGE */
+	SYNC
+	MTMSRD(r5)			/* enable use of fpu now */
+	isync
+/*
+ * For SMP, we don't do lazy FPU switching because it just gets too
+ * horrendously complex, especially when a task switches from one CPU
+ * to another.  Instead we call giveup_fpu in switch_to.
+ */
+#ifndef CONFIG_SMP
+	tophys(r6,0)			/* get __pa constant */
+	addis	r3,r6,last_task_used_math@ha
+	lwz	r4,last_task_used_math@l(r3)
+	cmpwi	0,r4,0
+	beq	1f
+	add	r4,r4,r6
+	addi	r4,r4,THREAD		/* want last_task_used_math->thread */
+	SAVE_32FPRS(0, r4)
+	mffs	fr0
+	stfd	fr0,THREAD_FPSCR-4(r4)
+	lwz	r5,PT_REGS(r4)
+	add	r5,r5,r6
+	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	li	r10,MSR_FP|MSR_FE0|MSR_FE1
+	andc	r4,r4,r10		/* disable FP for previous task */
+	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+	/* enable use of FP after return */
+	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
+	lwz	r4,THREAD_FPEXC_MODE(r5)
+	ori	r9,r9,MSR_FP		/* enable FP for current */
+	or	r9,r9,r4
+	lfd	fr0,THREAD_FPSCR-4(r5)
+	mtfsf	0xff,fr0
+	REST_32FPRS(0, r5)
+#ifndef CONFIG_SMP
+	subi	r4,r5,THREAD
+	sub	r4,r4,r6
+	stw	r4,last_task_used_math@l(r3)
+#endif /* CONFIG_SMP */
+	/* restore registers and return */
+	/* we haven't used ctr or xer or lr */
+	/* fall through to fast_exception_return */
+
+	.globl	fast_exception_return
+fast_exception_return:
+	andi.	r10,r9,MSR_RI		/* check for recoverable interrupt */
+	beq	1f			/* if not, we've got problems */
+2:	REST_4GPRS(3, r11)
+	lwz	r10,_CCR(r11)
+	REST_GPR(1, r11)
+	mtcr	r10
+	lwz	r10,_LINK(r11)
+	mtlr	r10
+	REST_GPR(10, r11)
+	mtspr	SPRN_SRR1,r9
+	mtspr	SPRN_SRR0,r12
+	REST_GPR(9, r11)
+	REST_GPR(12, r11)
+	lwz	r11,GPR11(r11)
+	SYNC
+	RFI
+
+/* check if the exception happened in a restartable section */
+1:	lis	r3,exc_exit_restart_end@ha
+	addi	r3,r3,exc_exit_restart_end@l
+	cmplw	r12,r3
+	bge	3f
+	lis	r4,exc_exit_restart@ha
+	addi	r4,r4,exc_exit_restart@l
+	cmplw	r12,r4
+	blt	3f
+	lis	r3,fee_restarts@ha
+	tophys(r3,r3)
+	lwz	r5,fee_restarts@l(r3)
+	addi	r5,r5,1
+	stw	r5,fee_restarts@l(r3)
+	mr	r12,r4		/* restart at exc_exit_restart */
+	b	2b
+
+	.comm	fee_restarts,4
+
+/* aargh, a nonrecoverable interrupt, panic */
+/* aargh, we don't know which trap this is */
+/* but the 601 doesn't implement the RI bit, so assume it's OK */
+3:
+BEGIN_FTR_SECTION
+	b	2b
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+	li	r10,-1
+	stw	r10,TRAP(r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	li	r10,MSR_KERNEL
+	bl	transfer_to_handler_full
+	.long	nonrecoverable_exception
+	.long	ret_from_except
+
+/*
+ * FP unavailable trap from kernel - print a message, but let
+ * the task use FP in the kernel until it returns to user mode.
+ */
+KernelFP:
+	lwz	r3,_MSR(r1)
+	ori	r3,r3,MSR_FP
+	stw	r3,_MSR(r1)		/* enable use of FP after return */
+	lis	r3,86f@h
+	ori	r3,r3,86f@l
+	mr	r4,r2			/* current */
+	lwz	r5,_NIP(r1)
+	bl	printk
+	b	ret_from_except
+86:	.string	"floating point used in kernel (task=%p, pc=%x)\n"
+	.align	4,0
+
+#ifdef CONFIG_ALTIVEC
+/* Note that the AltiVec support is closely modeled after the FP
+ * support.  Changes to one are likely to be applicable to the
+ * other!  */
+load_up_altivec:
+/*
+ * Disable AltiVec for the task which had AltiVec previously,
+ * and save its AltiVec registers in its thread_struct.
+ * Enables AltiVec for use in the kernel on return.
+ * On SMP we know the AltiVec units are free, since we give it up every
+ * switch.  -- Kumar
+ */
+	mfmsr	r5
+	oris	r5,r5,MSR_VEC@h
+	MTMSRD(r5)			/* enable use of AltiVec now */
+	isync
+/*
+ * For SMP, we don't do lazy AltiVec switching because it just gets too
+ * horrendously complex, especially when a task switches from one CPU
+ * to another.  Instead we call giveup_altivec in switch_to.
+ */
+#ifndef CONFIG_SMP
+	tophys(r6,0)
+	addis	r3,r6,last_task_used_altivec@ha
+	lwz	r4,last_task_used_altivec@l(r3)
+	cmpwi	0,r4,0
+	beq	1f
+	add	r4,r4,r6
+	addi	r4,r4,THREAD	/* want THREAD of last_task_used_altivec */
+	SAVE_32VR(0,r10,r4)
+	mfvscr	vr0
+	li	r10,THREAD_VSCR
+	stvx	vr0,r10,r4
+	lwz	r5,PT_REGS(r4)
+	add	r5,r5,r6
+	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r10,MSR_VEC@h
+	andc	r4,r4,r10	/* disable altivec for previous task */
+	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+	/* enable use of AltiVec after return */
+	oris	r9,r9,MSR_VEC@h
+	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
+	li	r4,1
+	li	r10,THREAD_VSCR
+	stw	r4,THREAD_USED_VR(r5)
+	lvx	vr0,r10,r5
+	mtvscr	vr0
+	REST_32VR(0,r10,r5)
+#ifndef CONFIG_SMP
+	subi	r4,r5,THREAD
+	sub	r4,r4,r6
+	stw	r4,last_task_used_altivec@l(r3)
+#endif /* CONFIG_SMP */
+	/* restore registers and return */
+	/* we haven't used ctr or xer or lr */
+	b	fast_exception_return
+
+/*
+ * AltiVec unavailable trap from kernel - print a message, but let
+ * the task use AltiVec in the kernel until it returns to user mode.
+ */
+KernelAltiVec:
+	lwz	r3,_MSR(r1)
+	oris	r3,r3,MSR_VEC@h
+	stw	r3,_MSR(r1)	/* enable use of AltiVec after return */
+	lis	r3,87f@h
+	ori	r3,r3,87f@l
+	mr	r4,r2		/* current */
+	lwz	r5,_NIP(r1)
+	bl	printk
+	b	ret_from_except
+87:	.string	"AltiVec used in kernel  (task=%p, pc=%x)  \n"
+	.align	4,0
+
+/*
+ * giveup_altivec(tsk)
+ * Disable AltiVec for the task given as the argument,
+ * and save the AltiVec registers in its thread_struct.
+ * Enables AltiVec for use in the kernel on return.
+ */
+
+	.globl	giveup_altivec
+giveup_altivec:
+	mfmsr	r5
+	oris	r5,r5,MSR_VEC@h
+	SYNC
+	MTMSRD(r5)			/* enable use of AltiVec now */
+	isync
+	cmpwi	0,r3,0
+	beqlr-				/* if no previous owner, done */
+	addi	r3,r3,THREAD		/* want THREAD of task */
+	lwz	r5,PT_REGS(r3)
+	cmpwi	0,r5,0
+	SAVE_32VR(0, r4, r3)
+	mfvscr	vr0
+	li	r4,THREAD_VSCR
+	stvx	vr0,r4,r3
+	beq	1f
+	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r3,MSR_VEC@h
+	andc	r4,r4,r3		/* disable AltiVec for previous task */
+	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+	li	r5,0
+	lis	r4,last_task_used_altivec@ha
+	stw	r5,last_task_used_altivec@l(r4)
+#endif /* CONFIG_SMP */
+	blr
+#endif /* CONFIG_ALTIVEC */
+
+/*
+ * giveup_fpu(tsk)
+ * Disable FP for the task given as the argument,
+ * and save the floating-point registers in its thread_struct.
+ * Enables the FPU for use in the kernel on return.
+ */
+	.globl	giveup_fpu
+giveup_fpu:
+	mfmsr	r5
+	ori	r5,r5,MSR_FP
+	SYNC_601
+	ISYNC_601
+	MTMSRD(r5)			/* enable use of fpu now */
+	SYNC_601
+	isync
+	cmpwi	0,r3,0
+	beqlr-				/* if no previous owner, done */
+	addi	r3,r3,THREAD	        /* want THREAD of task */
+	lwz	r5,PT_REGS(r3)
+	cmpwi	0,r5,0
+	SAVE_32FPRS(0, r3)
+	mffs	fr0
+	stfd	fr0,THREAD_FPSCR-4(r3)
+	beq	1f
+	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	li	r3,MSR_FP|MSR_FE0|MSR_FE1
+	andc	r4,r4,r3		/* disable FP for previous task */
+	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+	li	r5,0
+	lis	r4,last_task_used_math@ha
+	stw	r5,last_task_used_math@l(r4)
+#endif /* CONFIG_SMP */
+	blr
+
+/*
+ * This code is jumped to from the startup code to copy
+ * the kernel image to physical address 0.
+ */
+relocate_kernel:
+	addis	r9,r26,klimit@ha	/* fetch klimit */
+	lwz	r25,klimit@l(r9)
+	addis	r25,r25,-KERNELBASE@h
+	li	r3,0			/* Destination base address */
+	li	r6,0			/* Destination offset */
+	li	r5,0x4000		/* # bytes of memory to copy */
+	bl	copy_and_flush		/* copy the first 0x4000 bytes */
+	addi	r0,r3,4f@l		/* jump to the address of 4f */
+	mtctr	r0			/* in copy and do the rest. */
+	bctr				/* jump to the copy */
+4:	mr	r5,r25
+	bl	copy_and_flush		/* copy the rest */
+	b	turn_on_mmu
+
+/*
+ * Copy routine used to copy the kernel to start at physical address 0
+ * and flush and invalidate the caches as needed.
+ * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
+ * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
+ */
+copy_and_flush:
+	addi	r5,r5,-4
+	addi	r6,r6,-4
+4:	li	r0,L1_CACHE_LINE_SIZE/4
+	mtctr	r0
+3:	addi	r6,r6,4			/* copy a cache line */
+	lwzx	r0,r6,r4
+	stwx	r0,r6,r3
+	bdnz	3b
+	dcbst	r6,r3			/* write it to memory */
+	sync
+	icbi	r6,r3			/* flush the icache line */
+	cmplw	0,r6,r5
+	blt	4b
+	sync				/* additional sync needed on g4 */
+	isync
+	addi	r5,r5,4
+	addi	r6,r6,4
+	blr
+
+#ifdef CONFIG_APUS
+/*
+ * On APUS the physical base address of the kernel is not known at compile
+ * time, which means the __pa/__va constants used are incorrect. In the
+ * __init section is recorded the virtual addresses of instructions using
+ * these constants, so all that has to be done is fix these before
+ * continuing the kernel boot.
+ *
+ * r4 = The physical address of the kernel base.
+ */
+fix_mem_constants:
+	mr	r10,r4
+	addis	r10,r10,-KERNELBASE@h    /* virt_to_phys constant */
+	neg	r11,r10	                 /* phys_to_virt constant */
+
+	lis	r12,__vtop_table_begin@h
+	ori	r12,r12,__vtop_table_begin@l
+	add	r12,r12,r10	         /* table begin phys address */
+	lis	r13,__vtop_table_end@h
+	ori	r13,r13,__vtop_table_end@l
+	add	r13,r13,r10	         /* table end phys address */
+	subi	r12,r12,4
+	subi	r13,r13,4
+1:	lwzu	r14,4(r12)               /* virt address of instruction */
+	add     r14,r14,r10              /* phys address of instruction */
+	lwz     r15,0(r14)               /* instruction, now insert top */
+	rlwimi  r15,r10,16,16,31         /* half of vp const in low half */
+	stw	r15,0(r14)               /* of instruction and restore. */
+	dcbst	r0,r14			 /* write it to memory */
+	sync
+	icbi	r0,r14			 /* flush the icache line */
+	cmpw	r12,r13
+	bne     1b
+	sync				/* additional sync needed on g4 */
+	isync
+
+/*
+ * Map the memory where the exception handlers will
+ * be copied to when hash constants have been patched.
+ */
+#ifdef CONFIG_APUS_FAST_EXCEPT
+	lis	r8,0xfff0
+#else
+	lis	r8,0
+#endif
+	ori	r8,r8,0x2		/* 128KB, supervisor */
+	mtspr	SPRN_DBAT3U,r8
+	mtspr	SPRN_DBAT3L,r8
+
+	lis	r12,__ptov_table_begin@h
+	ori	r12,r12,__ptov_table_begin@l
+	add	r12,r12,r10	         /* table begin phys address */
+	lis	r13,__ptov_table_end@h
+	ori	r13,r13,__ptov_table_end@l
+	add	r13,r13,r10	         /* table end phys address */
+	subi	r12,r12,4
+	subi	r13,r13,4
+1:	lwzu	r14,4(r12)               /* virt address of instruction */
+	add     r14,r14,r10              /* phys address of instruction */
+	lwz     r15,0(r14)               /* instruction, now insert top */
+	rlwimi  r15,r11,16,16,31         /* half of pv const in low half*/
+	stw	r15,0(r14)               /* of instruction and restore. */
+	dcbst	r0,r14			 /* write it to memory */
+	sync
+	icbi	r0,r14			 /* flush the icache line */
+	cmpw	r12,r13
+	bne     1b
+
+	sync				/* additional sync needed on g4 */
+	isync				/* No speculative loading until now */
+	blr
+
+/***********************************************************************
+ *  Please note that on APUS the exception handlers are located at the
+ *  physical address 0xfff0000. For this reason, the exception handlers
+ *  cannot use relative branches to access the code below.
+ ***********************************************************************/
+#endif /* CONFIG_APUS */
+
+#ifdef CONFIG_SMP
+#ifdef CONFIG_GEMINI
+	.globl	__secondary_start_gemini
+__secondary_start_gemini:
+        mfspr   r4,SPRN_HID0
+        ori     r4,r4,HID0_ICFI
+        li      r3,0
+        ori     r3,r3,HID0_ICE
+        andc    r4,r4,r3
+        mtspr   SPRN_HID0,r4
+        sync
+        bl      gemini_prom_init
+        b       __secondary_start
+#endif /* CONFIG_GEMINI */
+	.globl	__secondary_start_psurge
+__secondary_start_psurge:
+	li	r24,1			/* cpu # */
+	b	__secondary_start_psurge99
+	.globl	__secondary_start_psurge2
+__secondary_start_psurge2:
+	li	r24,2			/* cpu # */
+	b	__secondary_start_psurge99
+	.globl	__secondary_start_psurge3
+__secondary_start_psurge3:
+	li	r24,3			/* cpu # */
+	b	__secondary_start_psurge99
+__secondary_start_psurge99:
+	/* we come in here with IR=0 and DR=1, and DBAT 0
+	   set to map the 0xf0000000 - 0xffffffff region */
+	mfmsr	r0
+	rlwinm	r0,r0,0,28,26		/* clear DR (0x10) */
+	SYNC
+	mtmsr	r0
+	isync
+
+	.globl	__secondary_start
+__secondary_start:
+#ifdef CONFIG_PPC64BRIDGE
+	mfmsr	r0
+	clrldi	r0,r0,1			/* make sure it's in 32-bit mode */
+	SYNC
+	MTMSRD(r0)
+	isync
+#endif
+	/* Copy some CPU settings from CPU 0 */
+	bl	__restore_cpu_setup
+
+	lis	r3,-KERNELBASE@h
+	mr	r4,r24
+	bl	identify_cpu
+	bl	call_setup_cpu		/* Call setup_cpu for this CPU */
+#ifdef CONFIG_6xx
+	lis	r3,-KERNELBASE@h
+	bl	init_idle_6xx
+#endif /* CONFIG_6xx */
+#ifdef CONFIG_POWER4
+	lis	r3,-KERNELBASE@h
+	bl	init_idle_power4
+#endif /* CONFIG_POWER4 */
+
+	/* get current_thread_info and current */
+	lis	r1,secondary_ti@ha
+	tophys(r1,r1)
+	lwz	r1,secondary_ti@l(r1)
+	tophys(r2,r1)
+	lwz	r2,TI_TASK(r2)
+
+	/* stack */
+	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+	li	r0,0
+	tophys(r3,r1)
+	stw	r0,0(r3)
+
+	/* load up the MMU */
+	bl	load_up_mmu
+
+	/* ptr to phys current thread */
+	tophys(r4,r2)
+	addi	r4,r4,THREAD	/* phys address of our thread_struct */
+	CLR_TOP32(r4)
+	mtspr	SPRN_SPRG3,r4
+	li	r3,0
+	mtspr	SPRN_SPRG2,r3	/* 0 => not in RTAS */
+
+	/* enable MMU and jump to start_secondary */
+	li	r4,MSR_KERNEL
+	FIX_SRR1(r4,r5)
+	lis	r3,start_secondary@h
+	ori	r3,r3,start_secondary@l
+	mtspr	SPRN_SRR0,r3
+	mtspr	SPRN_SRR1,r4
+	SYNC
+	RFI
+#endif /* CONFIG_SMP */
+
+/*
+ * Those generic dummy functions are kept for CPUs not
+ * included in CONFIG_6xx
+ */
+_GLOBAL(__setup_cpu_power3)
+	blr
+_GLOBAL(__setup_cpu_generic)
+	blr
+
+#if !defined(CONFIG_6xx) && !defined(CONFIG_POWER4)
+_GLOBAL(__save_cpu_setup)
+	blr
+_GLOBAL(__restore_cpu_setup)
+	blr
+#endif /* !defined(CONFIG_6xx) && !defined(CONFIG_POWER4) */
+
+
+/*
+ * Load stuff into the MMU.  Intended to be called with
+ * IR=0 and DR=0.
+ */
+load_up_mmu:
+	sync			/* Force all PTE updates to finish */
+	isync
+	tlbia			/* Clear all TLB entries */
+	sync			/* wait for tlbia/tlbie to finish */
+	TLBSYNC			/* ... on all CPUs */
+	/* Load the SDR1 register (hash table base & size) */
+	lis	r6,_SDR1@ha
+	tophys(r6,r6)
+	lwz	r6,_SDR1@l(r6)
+	mtspr	SPRN_SDR1,r6
+#ifdef CONFIG_PPC64BRIDGE
+	/* clear the ASR so we only use the pseudo-segment registers. */
+	li	r6,0
+	mtasr	r6
+#endif /* CONFIG_PPC64BRIDGE */
+	li	r0,16		/* load up segment register values */
+	mtctr	r0		/* for context 0 */
+	lis	r3,0x2000	/* Ku = 1, VSID = 0 */
+	li	r4,0
+3:	mtsrin	r3,r4
+	addi	r3,r3,0x111	/* increment VSID */
+	addis	r4,r4,0x1000	/* address of next segment */
+	bdnz	3b
+#ifndef CONFIG_POWER4
+/* Load the BAT registers with the values set up by MMU_init.
+   MMU_init takes care of whether we're on a 601 or not. */
+	mfpvr	r3
+	srwi	r3,r3,16
+	cmpwi	r3,1
+	lis	r3,BATS@ha
+	addi	r3,r3,BATS@l
+	tophys(r3,r3)
+	LOAD_BAT(0,r3,r4,r5)
+	LOAD_BAT(1,r3,r4,r5)
+	LOAD_BAT(2,r3,r4,r5)
+	LOAD_BAT(3,r3,r4,r5)
+#endif /* CONFIG_POWER4 */
+	blr
+
+/*
+ * This is where the main kernel code starts.
+ */
+start_here:
+	/* ptr to current */
+	lis	r2,init_task@h
+	ori	r2,r2,init_task@l
+	/* Set up for using our exception vectors */
+	/* ptr to phys current thread */
+	tophys(r4,r2)
+	addi	r4,r4,THREAD	/* init task's THREAD */
+	CLR_TOP32(r4)
+	mtspr	SPRN_SPRG3,r4
+	li	r3,0
+	mtspr	SPRN_SPRG2,r3	/* 0 => not in RTAS */
+
+	/* stack */
+	lis	r1,init_thread_union@ha
+	addi	r1,r1,init_thread_union@l
+	li	r0,0
+	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+/*
+ * Do early bootinfo parsing, platform-specific initialization,
+ * and set up the MMU.
+ */
+	mr	r3,r31
+	mr	r4,r30
+	mr	r5,r29
+	mr	r6,r28
+	mr	r7,r27
+	bl	machine_init
+	bl	MMU_init
+
+#ifdef CONFIG_APUS
+	/* Copy exception code to exception vector base on APUS. */
+	lis	r4,KERNELBASE@h
+#ifdef CONFIG_APUS_FAST_EXCEPT
+	lis	r3,0xfff0		/* Copy to 0xfff00000 */
+#else
+	lis	r3,0			/* Copy to 0x00000000 */
+#endif
+	li	r5,0x4000		/* # bytes of memory to copy */
+	li	r6,0
+	bl	copy_and_flush		/* copy the first 0x4000 bytes */
+#endif  /* CONFIG_APUS */
+
+/*
+ * Go back to running unmapped so we can load up new values
+ * for SDR1 (hash table pointer) and the segment registers
+ * and change to using our exception vectors.
+ */
+	lis	r4,2f@h
+	ori	r4,r4,2f@l
+	tophys(r4,r4)
+	li	r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
+	FIX_SRR1(r3,r5)
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r3
+	SYNC
+	RFI
+/* Load up the kernel context */
+2:	bl	load_up_mmu
+
+#ifdef CONFIG_BDI_SWITCH
+	/* Add helper information for the Abatron bdiGDB debugger.
+	 * We do this here because we know the mmu is disabled, and
+	 * will be enabled for real in just a few instructions.
+	 */
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	stw	r5, 0xf0(r0)	/* This much match your Abatron config */
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
+	tophys(r5, r5)
+	stw	r6, 0(r5)
+#endif /* CONFIG_BDI_SWITCH */
+
+/* Now turn on the MMU for real! */
+	li	r4,MSR_KERNEL
+	FIX_SRR1(r4,r5)
+	lis	r3,start_kernel@h
+	ori	r3,r3,start_kernel@l
+	mtspr	SPRN_SRR0,r3
+	mtspr	SPRN_SRR1,r4
+	SYNC
+	RFI
+
+/*
+ * Set up the segment registers for a new context.
+ */
+_GLOBAL(set_context)
+	mulli	r3,r3,897	/* multiply context by skew factor */
+	rlwinm	r3,r3,4,8,27	/* VSID = (context & 0xfffff) << 4 */
+	addis	r3,r3,0x6000	/* Set Ks, Ku bits */
+	li	r0,NUM_USER_SEGMENTS
+	mtctr	r0
+
+#ifdef CONFIG_BDI_SWITCH
+	/* Context switch the PTE pointer for the Abatron BDI2000.
+	 * The PGDIR is passed as second argument.
+	 */
+	lis	r5, KERNELBASE@h
+	lwz	r5, 0xf0(r5)
+	stw	r4, 0x4(r5)
+#endif
+	li	r4,0
+	isync
+3:
+#ifdef CONFIG_PPC64BRIDGE
+	slbie	r4
+#endif /* CONFIG_PPC64BRIDGE */
+	mtsrin	r3,r4
+	addi	r3,r3,0x111	/* next VSID */
+	rlwinm	r3,r3,0,8,3	/* clear out any overflow from VSID field */
+	addis	r4,r4,0x1000	/* address of next segment */
+	bdnz	3b
+	sync
+	isync
+	blr
+
+/*
+ * An undocumented "feature" of 604e requires that the v bit
+ * be cleared before changing BAT values.
+ *
+ * Also, newer IBM firmware does not clear bat3 and 4 so
+ * this makes sure it's done.
+ *  -- Cort
+ */
+clear_bats:
+	li	r10,0
+	mfspr	r9,SPRN_PVR
+	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
+	cmpwi	r9, 1
+	beq	1f
+
+	mtspr	SPRN_DBAT0U,r10
+	mtspr	SPRN_DBAT0L,r10
+	mtspr	SPRN_DBAT1U,r10
+	mtspr	SPRN_DBAT1L,r10
+	mtspr	SPRN_DBAT2U,r10
+	mtspr	SPRN_DBAT2L,r10
+	mtspr	SPRN_DBAT3U,r10
+	mtspr	SPRN_DBAT3L,r10
+1:
+	mtspr	SPRN_IBAT0U,r10
+	mtspr	SPRN_IBAT0L,r10
+	mtspr	SPRN_IBAT1U,r10
+	mtspr	SPRN_IBAT1L,r10
+	mtspr	SPRN_IBAT2U,r10
+	mtspr	SPRN_IBAT2L,r10
+	mtspr	SPRN_IBAT3U,r10
+	mtspr	SPRN_IBAT3L,r10
+BEGIN_FTR_SECTION
+	/* Here's a tweak: at this point, CPU setup have
+	 * not been called yet, so HIGH_BAT_EN may not be
+	 * set in HID0 for the 745x processors. However, it
+	 * seems that doesn't affect our ability to actually
+	 * write to these SPRs.
+	 */
+	mtspr	SPRN_DBAT4U,r10
+	mtspr	SPRN_DBAT4L,r10
+	mtspr	SPRN_DBAT5U,r10
+	mtspr	SPRN_DBAT5L,r10
+	mtspr	SPRN_DBAT6U,r10
+	mtspr	SPRN_DBAT6L,r10
+	mtspr	SPRN_DBAT7U,r10
+	mtspr	SPRN_DBAT7L,r10
+	mtspr	SPRN_IBAT4U,r10
+	mtspr	SPRN_IBAT4L,r10
+	mtspr	SPRN_IBAT5U,r10
+	mtspr	SPRN_IBAT5L,r10
+	mtspr	SPRN_IBAT6U,r10
+	mtspr	SPRN_IBAT6L,r10
+	mtspr	SPRN_IBAT7U,r10
+	mtspr	SPRN_IBAT7L,r10
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
+	blr
+
+flush_tlbs:
+	lis	r10, 0x40
+1:	addic.	r10, r10, -0x1000
+	tlbie	r10
+	blt	1b
+	sync
+	blr
+
+mmu_off:
+ 	addi	r4, r3, __after_mmu_off - _start
+	mfmsr	r3
+	andi.	r0,r3,MSR_DR|MSR_IR		/* MMU enabled? */
+	beqlr
+	andc	r3,r3,r0
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r3
+	sync
+	RFI
+
+#ifndef CONFIG_POWER4
+/*
+ * Use the first pair of BAT registers to map the 1st 16MB
+ * of RAM to KERNELBASE.  From this point on we can't safely
+ * call OF any more.
+ */
+initial_bats:
+	lis	r11,KERNELBASE@h
+#ifndef CONFIG_PPC64BRIDGE
+	mfspr	r9,SPRN_PVR
+	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
+	cmpwi	0,r9,1
+	bne	4f
+	ori	r11,r11,4		/* set up BAT registers for 601 */
+	li	r8,0x7f			/* valid, block length = 8MB */
+	oris	r9,r11,0x800000@h	/* set up BAT reg for 2nd 8M */
+	oris	r10,r8,0x800000@h	/* set up BAT reg for 2nd 8M */
+	mtspr	SPRN_IBAT0U,r11		/* N.B. 601 has valid bit in */
+	mtspr	SPRN_IBAT0L,r8		/* lower BAT register */
+	mtspr	SPRN_IBAT1U,r9
+	mtspr	SPRN_IBAT1L,r10
+	isync
+	blr
+#endif /* CONFIG_PPC64BRIDGE */
+
+4:	tophys(r8,r11)
+#ifdef CONFIG_SMP
+	ori	r8,r8,0x12		/* R/W access, M=1 */
+#else
+	ori	r8,r8,2			/* R/W access */
+#endif /* CONFIG_SMP */
+#ifdef CONFIG_APUS
+	ori	r11,r11,BL_8M<<2|0x2	/* set up 8MB BAT registers for 604 */
+#else
+	ori	r11,r11,BL_256M<<2|0x2	/* set up BAT registers for 604 */
+#endif /* CONFIG_APUS */
+
+#ifdef CONFIG_PPC64BRIDGE
+	/* clear out the high 32 bits in the BAT */
+	clrldi	r11,r11,32
+	clrldi	r8,r8,32
+#endif /* CONFIG_PPC64BRIDGE */
+	mtspr	SPRN_DBAT0L,r8		/* N.B. 6xx (not 601) have valid */
+	mtspr	SPRN_DBAT0U,r11		/* bit in upper BAT register */
+	mtspr	SPRN_IBAT0L,r8
+	mtspr	SPRN_IBAT0U,r11
+	isync
+	blr
+
+#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
+setup_disp_bat:
+	/*
+	 * setup the display bat prepared for us in prom.c
+	 */
+	mflr	r8
+	bl	reloc_offset
+	mtlr	r8
+	addis	r8,r3,disp_BAT@ha
+	addi	r8,r8,disp_BAT@l
+	lwz	r11,0(r8)
+	lwz	r8,4(r8)
+	mfspr	r9,SPRN_PVR
+	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
+	cmpwi	0,r9,1
+	beq	1f
+	mtspr	SPRN_DBAT3L,r8
+	mtspr	SPRN_DBAT3U,r11
+	blr
+1:	mtspr	SPRN_IBAT3L,r8
+	mtspr	SPRN_IBAT3U,r11
+	blr
+
+#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */
+
+#else /* CONFIG_POWER4 */
+/*
+ * Load up the SDR1 and segment register values now
+ * since we don't have the BATs.
+ * Also make sure we are running in 32-bit mode.
+ */
+
+initial_mm_power4:
+	addis	r14,r3,_SDR1@ha		/* get the value from _SDR1 */
+	lwz	r14,_SDR1@l(r14)	/* assume hash table below 4GB */
+	mtspr	SPRN_SDR1,r14
+	slbia
+	lis	r4,0x2000		/* set pseudo-segment reg 12 */
+	ori	r5,r4,0x0ccc
+	mtsr	12,r5
+#if 0
+	ori	r5,r4,0x0888		/* set pseudo-segment reg 8 */
+	mtsr	8,r5			/* (for access to serial port) */
+#endif
+#ifdef CONFIG_BOOTX_TEXT
+	ori	r5,r4,0x0999		/* set pseudo-segment reg 9 */
+	mtsr	9,r5			/* (for access to screen) */
+#endif
+	mfmsr	r0
+	clrldi	r0,r0,1
+	sync
+	mtmsr	r0
+	isync
+	blr
+
+#endif /* CONFIG_POWER4 */
+
+#ifdef CONFIG_8260
+/* Jump into the system reset for the rom.
+ * We first disable the MMU, and then jump to the ROM reset address.
+ *
+ * r3 is the board info structure, r4 is the location for starting.
+ * I use this for building a small kernel that can load other kernels,
+ * rather than trying to write or rely on a rom monitor that can tftp load.
+ */
+       .globl  m8260_gorom
+m8260_gorom:
+	mfmsr	r0
+	rlwinm	r0,r0,0,17,15	/* clear MSR_EE in r0 */
+	sync
+	mtmsr	r0
+	sync
+	mfspr	r11, SPRN_HID0
+	lis	r10, 0
+	ori	r10,r10,HID0_ICE|HID0_DCE
+	andc	r11, r11, r10
+	mtspr	SPRN_HID0, r11
+	isync
+	li	r5, MSR_ME|MSR_RI
+	lis	r6,2f@h
+	addis	r6,r6,-KERNELBASE@h
+	ori	r6,r6,2f@l
+	mtspr	SPRN_SRR0,r6
+	mtspr	SPRN_SRR1,r5
+	isync
+	sync
+	rfi
+2:
+	mtlr	r4
+	blr
+#endif
+
+
+/*
+ * We put a few things here that have to be page-aligned.
+ * This stuff goes at the beginning of the data segment,
+ * which is page-aligned.
+ */
+	.data
+	.globl	sdata
+sdata:
+	.globl	empty_zero_page
+empty_zero_page:
+	.space	4096
+
+	.globl	swapper_pg_dir
+swapper_pg_dir:
+	.space	4096
+
+/*
+ * This space gets a copy of optional info passed to us by the bootstrap
+ * Used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+	.globl	cmd_line
+cmd_line:
+	.space	512
+
+	.globl intercept_table
+intercept_table:
+	.long 0, 0, i0x200, i0x300, i0x400, 0, i0x600, i0x700
+	.long i0x800, 0, 0, 0, 0, i0xd00, 0, 0
+	.long 0, 0, 0, i0x1300, 0, 0, 0, 0
+	.long 0, 0, 0, 0, 0, 0, 0, 0
+	.long 0, 0, 0, 0, 0, 0, 0, 0
+	.long 0, 0, 0, 0, 0, 0, 0, 0
+
+/* Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+abatron_pteptrs:
+	.space	8
diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S
new file mode 100644
index 00000000000..9ed8165a3d6
--- /dev/null
+++ b/arch/ppc/kernel/head_44x.S
@@ -0,0 +1,753 @@
+/*
+ * arch/ppc/kernel/head_44x.S
+ *
+ * Kernel execution entry point code.
+ *
+ *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ *      Initial PowerPC version.
+ *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *      Rewritten for PReP
+ *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ *      Low-level exception handers, MMU support, and rewrite.
+ *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ *      PowerPC 8xx modifications.
+ *    Copyright (c) 1998-1999 TiVo, Inc.
+ *      PowerPC 403GCX modifications.
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *      PowerPC 403GCX/405GP modifications.
+ *    Copyright 2000 MontaVista Software Inc.
+ *	PPC405 modifications
+ *      PowerPC 403GCX/405GP modifications.
+ * 	Author: MontaVista Software, Inc.
+ *         	frank_rowand@mvista.com or source@mvista.com
+ * 	   	debbie_chu@mvista.com
+ *    Copyright 2002-2005 MontaVista Software, Inc.
+ *      PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/ibm4xx.h>
+#include <asm/ibm44x.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/offsets.h>
+#include "head_booke.h"
+
+
+/* As with the other PowerPC ports, it is expected that when code
+ * execution begins here, the following registers contain valid, yet
+ * optional, information:
+ *
+ *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
+ *   r4 - Starting address of the init RAM disk
+ *   r5 - Ending address of the init RAM disk
+ *   r6 - Start of kernel command line string (e.g. "mem=128")
+ *   r7 - End of kernel command line string
+ *
+ */
+	.text
+_GLOBAL(_stext)
+_GLOBAL(_start)
+	/*
+	 * Reserve a word at a fixed location to store the address
+	 * of abatron_pteptrs
+	 */
+	nop
+/*
+ * Save parameters we are passed
+ */
+	mr	r31,r3
+	mr	r30,r4
+	mr	r29,r5
+	mr	r28,r6
+	mr	r27,r7
+	li	r24,0		/* CPU number */
+
+/*
+ * Set up the initial MMU state
+ *
+ * We are still executing code at the virtual address
+ * mappings set by the firmware for the base of RAM.
+ *
+ * We first invalidate all TLB entries but the one
+ * we are running from.  We then load the KERNELBASE
+ * mappings so we can begin to use kernel addresses
+ * natively and so the interrupt vector locations are
+ * permanently pinned (necessary since Book E
+ * implementations always have translation enabled).
+ *
+ * TODO: Use the known TLB entry we are running from to
+ *	 determine which physical region we are located
+ *	 in.  This can be used to determine where in RAM
+ *	 (on a shared CPU system) or PCI memory space
+ *	 (on a DRAMless system) we are located.
+ *       For now, we assume a perfect world which means
+ *	 we are located at the base of DRAM (physical 0).
+ */
+
+/*
+ * Search TLB for entry that we are currently using.
+ * Invalidate all entries but the one we are using.
+ */
+	/* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
+	mfspr	r3,SPRN_PID			/* Get PID */
+	mfmsr	r4				/* Get MSR */
+	andi.	r4,r4,MSR_IS@l			/* TS=1? */
+	beq	wmmucr				/* If not, leave STS=0 */
+	oris	r3,r3,PPC44x_MMUCR_STS@h	/* Set STS=1 */
+wmmucr:	mtspr	SPRN_MMUCR,r3			/* Put MMUCR */
+	sync
+
+	bl	invstr				/* Find our address */
+invstr:	mflr	r5				/* Make it accessible */
+	tlbsx	r23,0,r5			/* Find entry we are in */
+	li	r4,0				/* Start at TLB entry 0 */
+	li	r3,0				/* Set PAGEID inval value */
+1:	cmpw	r23,r4				/* Is this our entry? */
+	beq	skpinv				/* If so, skip the inval */
+	tlbwe	r3,r4,PPC44x_TLB_PAGEID		/* If not, inval the entry */
+skpinv:	addi	r4,r4,1				/* Increment */
+	cmpwi	r4,64				/* Are we done? */
+	bne	1b				/* If not, repeat */
+	isync					/* If so, context change */
+
+/*
+ * Configure and load pinned entry into TLB slot 63.
+ */
+
+	lis	r3,KERNELBASE@h		/* Load the kernel virtual address */
+	ori	r3,r3,KERNELBASE@l
+
+	/* Kernel is at the base of RAM */
+	li r4, 0			/* Load the kernel physical address */
+
+	/* Load the kernel PID = 0 */
+	li	r0,0
+	mtspr	SPRN_PID,r0
+	sync
+
+	/* Initialize MMUCR */
+	li	r5,0
+	mtspr	SPRN_MMUCR,r5
+	sync
+
+ 	/* pageid fields */
+	clrrwi	r3,r3,10		/* Mask off the effective page number */
+	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
+
+	/* xlat fields */
+	clrrwi	r4,r4,10		/* Mask off the real page number */
+					/* ERPN is 0 for first 4GB page */
+
+	/* attrib fields */
+	/* Added guarded bit to protect against speculative loads/stores */
+	li	r5,0
+	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
+
+        li      r0,63                    /* TLB slot 63 */
+
+	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
+	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
+	tlbwe	r5,r0,PPC44x_TLB_ATTRIB	/* Load the attrib/access fields */
+
+	/* Force context change */
+	mfmsr	r0
+	mtspr	SPRN_SRR1, r0
+	lis	r0,3f@h
+	ori	r0,r0,3f@l
+	mtspr	SPRN_SRR0,r0
+	sync
+	rfi
+
+	/* If necessary, invalidate original entry we used */
+3:	cmpwi	r23,63
+	beq	4f
+	li	r6,0
+	tlbwe   r6,r23,PPC44x_TLB_PAGEID
+	isync
+
+4:
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+	/*
+	 * Add temporary UART mapping for early debug.  This
+	 * mapping must be identical to that used by the early
+	 * bootloader code since the same asm/serial.h parameters
+	 * are used for polled operation.
+	 */
+ 	/* pageid fields */
+	lis	r3,UART0_IO_BASE@h
+	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
+
+	/* xlat fields */
+	lis	r4,UART0_PHYS_IO_BASE@h		/* RPN depends on SoC */
+	ori	r4,r4,0x0001		/* ERPN is 1 for second 4GB page */
+
+	/* attrib fields */
+	li	r5,0
+	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
+
+        li      r0,1                    /* TLB slot 1 */
+
+	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
+	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
+	tlbwe	r5,r0,PPC44x_TLB_ATTRIB	/* Load the attrib/access fields */
+
+	/* Force context change */
+	isync
+#endif /* CONFIG_SERIAL_TEXT_DEBUG */
+
+	/* Establish the interrupt vector offsets */
+	SET_IVOR(0,  CriticalInput);
+	SET_IVOR(1,  MachineCheck);
+	SET_IVOR(2,  DataStorage);
+	SET_IVOR(3,  InstructionStorage);
+	SET_IVOR(4,  ExternalInput);
+	SET_IVOR(5,  Alignment);
+	SET_IVOR(6,  Program);
+	SET_IVOR(7,  FloatingPointUnavailable);
+	SET_IVOR(8,  SystemCall);
+	SET_IVOR(9,  AuxillaryProcessorUnavailable);
+	SET_IVOR(10, Decrementer);
+	SET_IVOR(11, FixedIntervalTimer);
+	SET_IVOR(12, WatchdogTimer);
+	SET_IVOR(13, DataTLBError);
+	SET_IVOR(14, InstructionTLBError);
+	SET_IVOR(15, Debug);
+
+	/* Establish the interrupt vector base */
+	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
+	mtspr	SPRN_IVPR,r4
+
+	/*
+	 * This is where the main kernel code starts.
+	 */
+
+	/* ptr to current */
+	lis	r2,init_task@h
+	ori	r2,r2,init_task@l
+
+	/* ptr to current thread */
+	addi	r4,r2,THREAD	/* init task's THREAD */
+	mtspr	SPRN_SPRG3,r4
+
+	/* stack */
+	lis	r1,init_thread_union@h
+	ori	r1,r1,init_thread_union@l
+	li	r0,0
+	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+
+	bl	early_init
+
+/*
+ * Decide what sort of machine this is and initialize the MMU.
+ */
+	mr	r3,r31
+	mr	r4,r30
+	mr	r5,r29
+	mr	r6,r28
+	mr	r7,r27
+	bl	machine_init
+	bl	MMU_init
+
+	/* Setup PTE pointers for the Abatron bdiGDB */
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	lis	r4, KERNELBASE@h
+	ori	r4, r4, KERNELBASE@l
+	stw	r5, 0(r4)	/* Save abatron_pteptrs at a fixed location */
+	stw	r6, 0(r5)
+
+	/* Let's move on */
+	lis	r4,start_kernel@h
+	ori	r4,r4,start_kernel@l
+	lis	r3,MSR_KERNEL@h
+	ori	r3,r3,MSR_KERNEL@l
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r3
+	rfi			/* change context and jump to start_kernel */
+
+/*
+ * Interrupt vector entry code
+ *
+ * The Book E MMUs are always on so we don't need to handle
+ * interrupts in real mode as with previous PPC processors. In
+ * this case we handle interrupts in the kernel virtual address
+ * space.
+ *
+ * Interrupt vectors are dynamically placed relative to the
+ * interrupt prefix as determined by the address of interrupt_base.
+ * The interrupt vectors offsets are programmed using the labels
+ * for each interrupt vector entry.
+ *
+ * Interrupt vectors must be aligned on a 16 byte boundary.
+ * We align on a 32 byte cache line boundary for good measure.
+ */
+
+interrupt_base:
+	/* Critical Input Interrupt */
+	CRITICAL_EXCEPTION(0x0100, CriticalInput, UnknownException)
+
+	/* Machine Check Interrupt */
+#ifdef CONFIG_440A
+	MCHECK_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+#else
+	CRITICAL_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+#endif
+
+	/* Data Storage Interrupt */
+	START_EXCEPTION(DataStorage)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG4W, r12
+	mtspr	SPRN_SPRG5W, r13
+	mfcr	r11
+	mtspr	SPRN_SPRG7W, r11
+
+	/*
+	 * Check if it was a store fault, if not then bail
+	 * because a user tried to access a kernel or
+	 * read-protected page.  Otherwise, get the
+	 * offending address and handle it.
+	 */
+	mfspr	r10, SPRN_ESR
+	andis.	r10, r10, ESR_ST@h
+	beq	2f
+
+	mfspr	r10, SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	andis.	r11, r10, 0x8000
+	beq	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+
+	mfspr   r12,SPRN_MMUCR
+	rlwinm	r12,r12,0,0,23		/* Clear TID */
+
+	b	4f
+
+	/* Get the PGD for the current thread */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+
+	/* Load PID into MMUCR TID */
+	mfspr	r12,SPRN_MMUCR		/* Get MMUCR */
+	mfspr   r13,SPRN_PID		/* Get PID */
+	rlwimi	r12,r13,0,24,31		/* Set TID */
+
+4:
+	mtspr   SPRN_MMUCR,r12
+
+	rlwinm  r12, r10, 13, 19, 29    /* Compute pgdir/pmd offset */
+	lwzx    r11, r12, r11           /* Get pgd/pmd entry */
+	rlwinm. r12, r11, 0, 0, 20      /* Extract pt base address */
+	beq     2f                      /* Bail if no table */
+
+	rlwimi  r12, r10, 23, 20, 28    /* Compute pte address */
+	lwz     r11, 4(r12)             /* Get pte entry */
+
+	andi.	r13, r11, _PAGE_RW	/* Is it writeable? */
+	beq	2f			/* Bail if not */
+
+	/* Update 'changed'.
+	*/
+	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+	stw	r11, 4(r12)		/* Update Linux page table */
+
+	li	r13, PPC44x_TLB_SR@l	/* Set SR */
+	rlwimi	r13, r11, 29, 29, 29	/* SX = _PAGE_HWEXEC */
+	rlwimi	r13, r11, 0, 30, 30	/* SW = _PAGE_RW */
+	rlwimi	r13, r11, 29, 28, 28	/* UR = _PAGE_USER */
+	rlwimi	r12, r11, 31, 26, 26	/* (_PAGE_USER>>1)->r12 */
+	rlwimi	r12, r11, 29, 30, 30	/* (_PAGE_USER>>3)->r12 */
+	and	r12, r12, r11		/* HWEXEC/RW & USER */
+	rlwimi	r13, r12, 0, 26, 26	/* UX = HWEXEC & USER */
+	rlwimi	r13, r12, 3, 27, 27	/* UW = RW & USER */
+
+	rlwimi	r11,r13,0,26,31		/* Insert static perms */
+
+	rlwinm	r11,r11,0,20,15		/* Clear U0-U3 */
+
+	/* find the TLB index that caused the fault.  It has to be here. */
+	tlbsx	r10, 0, r10
+
+	tlbwe	r11, r10, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
+
+	/* Done...restore registers and get out of here.
+	*/
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	rfi			/* Force context change */
+
+2:
+	/*
+	 * The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	data_access
+
+	/* Instruction Storage Interrupt */
+	INSTRUCTION_STORAGE_EXCEPTION
+
+	/* External Input Interrupt */
+	EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
+
+	/* Alignment Interrupt */
+	ALIGNMENT_EXCEPTION
+
+	/* Program Interrupt */
+	PROGRAM_EXCEPTION
+
+	/* Floating Point Unavailable Interrupt */
+	EXCEPTION(0x2010, FloatingPointUnavailable, UnknownException, EXC_XFER_EE)
+
+	/* System Call Interrupt */
+	START_EXCEPTION(SystemCall)
+	NORMAL_EXCEPTION_PROLOG
+	EXC_XFER_EE_LITE(0x0c00, DoSyscall)
+
+	/* Auxillary Processor Unavailable Interrupt */
+	EXCEPTION(0x2020, AuxillaryProcessorUnavailable, UnknownException, EXC_XFER_EE)
+
+	/* Decrementer Interrupt */
+	DECREMENTER_EXCEPTION
+
+	/* Fixed Internal Timer Interrupt */
+	/* TODO: Add FIT support */
+	EXCEPTION(0x1010, FixedIntervalTimer, UnknownException, EXC_XFER_EE)
+
+	/* Watchdog Timer Interrupt */
+	/* TODO: Add watchdog support */
+	CRITICAL_EXCEPTION(0x1020, WatchdogTimer, UnknownException)
+
+	/* Data TLB Error Interrupt */
+	START_EXCEPTION(DataTLBError)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG4W, r12
+	mtspr	SPRN_SPRG5W, r13
+	mfcr	r11
+	mtspr	SPRN_SPRG7W, r11
+	mfspr	r10, SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	andis.	r11, r10, 0x8000
+	beq	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+
+	mfspr	r12,SPRN_MMUCR
+	rlwinm	r12,r12,0,0,23		/* Clear TID */
+
+	b	4f
+
+	/* Get the PGD for the current thread */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+
+	/* Load PID into MMUCR TID */
+	mfspr	r12,SPRN_MMUCR
+	mfspr   r13,SPRN_PID		/* Get PID */
+	rlwimi	r12,r13,0,24,31		/* Set TID */
+
+4:
+	mtspr	SPRN_MMUCR,r12
+
+	rlwinm 	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
+	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
+	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
+	lwz	r11, 4(r12)		/* Get pte entry */
+	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
+	beq	2f			/* Bail if not present */
+
+	ori	r11, r11, _PAGE_ACCESSED
+	stw	r11, 4(r12)
+
+	 /* Jump to common tlb load */
+	b	finish_tlb_load
+
+2:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	data_access
+
+	/* Instruction TLB Error Interrupt */
+	/*
+	 * Nearly the same as above, except we get our
+	 * information from different registers and bailout
+	 * to a different point.
+	 */
+	START_EXCEPTION(InstructionTLBError)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG4W, r12
+	mtspr	SPRN_SPRG5W, r13
+	mfcr	r11
+	mtspr	SPRN_SPRG7W, r11
+	mfspr	r10, SPRN_SRR0		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	andis.	r11, r10, 0x8000
+	beq	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+
+	mfspr	r12,SPRN_MMUCR
+	rlwinm	r12,r12,0,0,23		/* Clear TID */
+
+	b	4f
+
+	/* Get the PGD for the current thread */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+
+	/* Load PID into MMUCR TID */
+	mfspr	r12,SPRN_MMUCR
+	mfspr   r13,SPRN_PID		/* Get PID */
+	rlwimi	r12,r13,0,24,31		/* Set TID */
+
+4:
+	mtspr	SPRN_MMUCR,r12
+
+	rlwinm	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
+	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
+	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
+	lwz	r11, 4(r12)		/* Get pte entry */
+	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
+	beq	2f			/* Bail if not present */
+
+	ori	r11, r11, _PAGE_ACCESSED
+	stw	r11, 4(r12)
+
+	/* Jump to common TLB load point */
+	b	finish_tlb_load
+
+2:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	InstructionStorage
+
+	/* Debug Interrupt */
+	DEBUG_EXCEPTION
+
+/*
+ * Local functions
+ */
+	/*
+	 * Data TLB exceptions will bail out to this point
+	 * if they can't resolve the lightweight TLB fault.
+	 */
+data_access:
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
+	stw	r5,_ESR(r11)
+	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
+	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+
+/*
+
+ * Both the instruction and data TLB miss get to this
+ * point to load the TLB.
+ * 	r10 - EA of fault
+ * 	r11 - available to use
+ *	r12 - Pointer to the 64-bit PTE
+ *	r13 - available to use
+ *	MMUCR - loaded with proper value when we get here
+ *	Upon exit, we reload everything and RFI.
+ */
+finish_tlb_load:
+	/*
+	 * We set execute, because we don't have the granularity to
+	 * properly set this at the page level (Linux problem).
+	 * If shared is set, we cause a zero PID->TID load.
+	 * Many of these bits are software only.  Bits we don't set
+	 * here we (properly should) assume have the appropriate value.
+	 */
+
+	/* Load the next available TLB index */
+	lis	r13, tlb_44x_index@ha
+	lwz	r13, tlb_44x_index@l(r13)
+	/* Load the TLB high watermark */
+	lis	r11, tlb_44x_hwater@ha
+	lwz	r11, tlb_44x_hwater@l(r11)
+
+	/* Increment, rollover, and store TLB index */
+	addi	r13, r13, 1
+	cmpw	0, r13, r11			/* reserve entries */
+	ble	7f
+	li	r13, 0
+7:
+	/* Store the next available TLB index */
+	lis	r11, tlb_44x_index@ha
+	stw	r13, tlb_44x_index@l(r11)
+
+	lwz	r11, 0(r12)			/* Get MS word of PTE */
+	lwz	r12, 4(r12)			/* Get LS word of PTE */
+	rlwimi	r11, r12, 0, 0 , 19		/* Insert RPN */
+	tlbwe	r11, r13, PPC44x_TLB_XLAT	/* Write XLAT */
+
+	/*
+	 * Create PAGEID. This is the faulting address,
+	 * page size, and valid flag.
+	 */
+	li	r11, PPC44x_TLB_VALID | PPC44x_TLB_4K
+	rlwimi	r10, r11, 0, 20, 31		/* Insert valid and page size */
+	tlbwe	r10, r13, PPC44x_TLB_PAGEID	/* Write PAGEID */
+
+	li	r10, PPC44x_TLB_SR@l		/* Set SR */
+	rlwimi	r10, r12, 0, 30, 30		/* Set SW = _PAGE_RW */
+	rlwimi	r10, r12, 29, 29, 29		/* SX = _PAGE_HWEXEC */
+	rlwimi	r10, r12, 29, 28, 28		/* UR = _PAGE_USER */
+	rlwimi	r11, r12, 31, 26, 26		/* (_PAGE_USER>>1)->r12 */
+	and	r11, r12, r11			/* HWEXEC & USER */
+	rlwimi	r10, r11, 0, 26, 26		/* UX = HWEXEC & USER */
+
+	rlwimi	r12, r10, 0, 26, 31		/* Insert static perms */
+	rlwinm	r12, r12, 0, 20, 15		/* Clear U0-U3 */
+	tlbwe	r12, r13, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
+
+	/* Done...restore registers and get out of here.
+	*/
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	rfi					/* Force context change */
+
+/*
+ * Global functions
+ */
+
+/*
+ * extern void giveup_altivec(struct task_struct *prev)
+ *
+ * The 44x core does not have an AltiVec unit.
+ */
+_GLOBAL(giveup_altivec)
+	blr
+
+/*
+ * extern void giveup_fpu(struct task_struct *prev)
+ *
+ * The 44x core does not have an FPU.
+ */
+_GLOBAL(giveup_fpu)
+	blr
+
+/*
+ * extern void abort(void)
+ *
+ * At present, this routine just applies a system reset.
+ */
+_GLOBAL(abort)
+        mfspr   r13,SPRN_DBCR0
+        oris    r13,r13,DBCR0_RST_SYSTEM@h
+        mtspr   SPRN_DBCR0,r13
+
+_GLOBAL(set_context)
+
+#ifdef CONFIG_BDI_SWITCH
+	/* Context switch the PTE pointer for the Abatron BDI2000.
+	 * The PGDIR is the second parameter.
+	 */
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	stw	r4, 0x4(r5)
+#endif
+	mtspr	SPRN_PID,r3
+	isync			/* Force context change */
+	blr
+
+/*
+ * We put a few things here that have to be page-aligned. This stuff
+ * goes at the beginning of the data segment, which is page-aligned.
+ */
+	.data
+_GLOBAL(sdata)
+_GLOBAL(empty_zero_page)
+	.space	4096
+
+/*
+ * To support >32-bit physical addresses, we use an 8KB pgdir.
+ */
+_GLOBAL(swapper_pg_dir)
+	.space	8192
+
+/* Reserved 4k for the critical exception stack & 4k for the machine
+ * check stack per CPU for kernel mode exceptions */
+	.section .bss
+        .align 12
+exception_stack_bottom:
+	.space	BOOKE_EXCEPTION_STACK_SIZE
+_GLOBAL(exception_stack_top)
+
+/*
+ * This space gets a copy of optional info passed to us by the bootstrap
+ * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+_GLOBAL(cmd_line)
+	.space	512
+
+/*
+ * Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+abatron_pteptrs:
+	.space	8
+
+
diff --git a/arch/ppc/kernel/head_4xx.S b/arch/ppc/kernel/head_4xx.S
new file mode 100644
index 00000000000..6f5d380e234
--- /dev/null
+++ b/arch/ppc/kernel/head_4xx.S
@@ -0,0 +1,1010 @@
+/*
+ *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ *      Initial PowerPC version.
+ *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *      Rewritten for PReP
+ *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ *      Low-level exception handers, MMU support, and rewrite.
+ *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ *      PowerPC 8xx modifications.
+ *    Copyright (c) 1998-1999 TiVo, Inc.
+ *      PowerPC 403GCX modifications.
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *      PowerPC 403GCX/405GP modifications.
+ *    Copyright 2000 MontaVista Software Inc.
+ *	PPC405 modifications
+ *      PowerPC 403GCX/405GP modifications.
+ * 	Author: MontaVista Software, Inc.
+ *         	frank_rowand@mvista.com or source@mvista.com
+ * 	   	debbie_chu@mvista.com
+ *
+ *
+ *    Module name: head_4xx.S
+ *
+ *    Description:
+ *      Kernel execution entry point code.
+ *
+ *    This program is free software; you can redistribute it and/or
+ *    modify it under the terms of the GNU General Public License
+ *    as published by the Free Software Foundation; either version
+ *    2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/ibm4xx.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/offsets.h>
+
+/* As with the other PowerPC ports, it is expected that when code
+ * execution begins here, the following registers contain valid, yet
+ * optional, information:
+ *
+ *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
+ *   r4 - Starting address of the init RAM disk
+ *   r5 - Ending address of the init RAM disk
+ *   r6 - Start of kernel command line string (e.g. "mem=96m")
+ *   r7 - End of kernel command line string
+ *
+ * This is all going to change RSN when we add bi_recs.......  -- Dan
+ */
+	.text
+_GLOBAL(_stext)
+_GLOBAL(_start)
+
+	/* Save parameters we are passed.
+	*/
+	mr	r31,r3
+	mr	r30,r4
+	mr	r29,r5
+	mr	r28,r6
+	mr	r27,r7
+
+	/* We have to turn on the MMU right away so we get cache modes
+	 * set correctly.
+	 */
+	bl	initial_mmu
+
+/* We now have the lower 16 Meg mapped into TLB entries, and the caches
+ * ready to work.
+ */
+turn_on_mmu:
+	lis	r0,MSR_KERNEL@h
+	ori	r0,r0,MSR_KERNEL@l
+	mtspr	SPRN_SRR1,r0
+	lis	r0,start_here@h
+	ori	r0,r0,start_here@l
+	mtspr	SPRN_SRR0,r0
+	SYNC
+	rfi				/* enables MMU */
+	b	.			/* prevent prefetch past rfi */
+
+/*
+ * This area is used for temporarily saving registers during the
+ * critical exception prolog.
+ */
+	. = 0xc0
+crit_save:
+_GLOBAL(crit_r10)
+	.space	4
+_GLOBAL(crit_r11)
+	.space	4
+
+/*
+ * Exception vector entry code. This code runs with address translation
+ * turned off (i.e. using physical addresses). We assume SPRG3 has the
+ * physical address of the current task thread_struct.
+ * Note that we have to have decremented r1 before we write to any fields
+ * of the exception frame, since a critical interrupt could occur at any
+ * time, and it will write to the area immediately below the current r1.
+ */
+#define NORMAL_EXCEPTION_PROLOG						     \
+	mtspr	SPRN_SPRG0,r10;		/* save two registers to work with */\
+	mtspr	SPRN_SPRG1,r11;						     \
+	mtspr	SPRN_SPRG2,r1;						     \
+	mfcr	r10;			/* save CR in r10 for now	   */\
+	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
+	andi.	r11,r11,MSR_PR;						     \
+	beq	1f;							     \
+	mfspr	r1,SPRN_SPRG3;		/* if from user, start at top of   */\
+	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
+	addi	r1,r1,THREAD_SIZE;					     \
+1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
+	tophys(r11,r1);							     \
+	stw	r10,_CCR(r11);          /* save various registers	   */\
+	stw	r12,GPR12(r11);						     \
+	stw	r9,GPR9(r11);						     \
+	mfspr	r10,SPRN_SPRG0;						     \
+	stw	r10,GPR10(r11);						     \
+	mfspr	r12,SPRN_SPRG1;						     \
+	stw	r12,GPR11(r11);						     \
+	mflr	r10;							     \
+	stw	r10,_LINK(r11);						     \
+	mfspr	r10,SPRN_SPRG2;						     \
+	mfspr	r12,SPRN_SRR0;						     \
+	stw	r10,GPR1(r11);						     \
+	mfspr	r9,SPRN_SRR1;						     \
+	stw	r10,0(r11);						     \
+	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
+	stw	r0,GPR0(r11);						     \
+	SAVE_4GPRS(3, r11);						     \
+	SAVE_2GPRS(7, r11)
+
+/*
+ * Exception prolog for critical exceptions.  This is a little different
+ * from the normal exception prolog above since a critical exception
+ * can potentially occur at any point during normal exception processing.
+ * Thus we cannot use the same SPRG registers as the normal prolog above.
+ * Instead we use a couple of words of memory at low physical addresses.
+ * This is OK since we don't support SMP on these processors.
+ */
+#define CRITICAL_EXCEPTION_PROLOG					     \
+	stw	r10,crit_r10@l(0);	/* save two registers to work with */\
+	stw	r11,crit_r11@l(0);					     \
+	mfcr	r10;			/* save CR in r10 for now	   */\
+	mfspr	r11,SPRN_SRR3;		/* check whether user or kernel    */\
+	andi.	r11,r11,MSR_PR;						     \
+	lis	r11,critical_stack_top@h;				     \
+	ori	r11,r11,critical_stack_top@l;				     \
+	beq	1f;							     \
+	/* COMING FROM USER MODE */					     \
+	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
+	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
+	addi	r11,r11,THREAD_SIZE;					     \
+1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
+	tophys(r11,r11);						     \
+	stw	r10,_CCR(r11);          /* save various registers	   */\
+	stw	r12,GPR12(r11);						     \
+	stw	r9,GPR9(r11);						     \
+	mflr	r10;							     \
+	stw	r10,_LINK(r11);						     \
+	mfspr	r12,SPRN_DEAR;		/* save DEAR and ESR in the frame  */\
+	stw	r12,_DEAR(r11);		/* since they may have had stuff   */\
+	mfspr	r9,SPRN_ESR;		/* in them at the point where the  */\
+	stw	r9,_ESR(r11);		/* exception was taken		   */\
+	mfspr	r12,SPRN_SRR2;						     \
+	stw	r1,GPR1(r11);						     \
+	mfspr	r9,SPRN_SRR3;						     \
+	stw	r1,0(r11);						     \
+	tovirt(r1,r11);							     \
+	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
+	stw	r0,GPR0(r11);						     \
+	SAVE_4GPRS(3, r11);						     \
+	SAVE_2GPRS(7, r11)
+
+	/*
+	 * State at this point:
+	 * r9 saved in stack frame, now saved SRR3 & ~MSR_WE
+	 * r10 saved in crit_r10 and in stack frame, trashed
+	 * r11 saved in crit_r11 and in stack frame,
+	 *	now phys stack/exception frame pointer
+	 * r12 saved in stack frame, now saved SRR2
+	 * CR saved in stack frame, CR0.EQ = !SRR3.PR
+	 * LR, DEAR, ESR in stack frame
+	 * r1 saved in stack frame, now virt stack/excframe pointer
+	 * r0, r3-r8 saved in stack frame
+	 */
+
+/*
+ * Exception vectors.
+ */
+#define	START_EXCEPTION(n, label)					     \
+	. = n;								     \
+label:
+
+#define EXCEPTION(n, label, hdlr, xfer)				\
+	START_EXCEPTION(n, label);				\
+	NORMAL_EXCEPTION_PROLOG;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
+	xfer(n, hdlr)
+
+#define CRITICAL_EXCEPTION(n, label, hdlr)			\
+	START_EXCEPTION(n, label);				\
+	CRITICAL_EXCEPTION_PROLOG;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
+	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+			  NOCOPY, crit_transfer_to_handler,	\
+			  ret_from_crit_exc)
+
+#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret)	\
+	li	r10,trap;					\
+	stw	r10,TRAP(r11);					\
+	lis	r10,msr@h;					\
+	ori	r10,r10,msr@l;					\
+	copyee(r10, r9);					\
+	bl	tfer;		 				\
+	.long	hdlr;						\
+	.long	ret
+
+#define COPY_EE(d, s)		rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr)		\
+	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
+			  ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
+			  ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
+			  ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr)	\
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
+			  ret_from_except)
+
+
+/*
+ * 0x0100 - Critical Interrupt Exception
+ */
+	CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, UnknownException)
+
+/*
+ * 0x0200 - Machine Check Exception
+ */
+	CRITICAL_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+
+/*
+ * 0x0300 - Data Storage Exception
+ * This happens for just a few reasons.  U0 set (but we don't do that),
+ * or zone protection fault (user violation, write to protected page).
+ * If this is just an update of modified status, we do that quickly
+ * and exit.  Otherwise, we call heavywight functions to do the work.
+ */
+	START_EXCEPTION(0x0300,	DataStorage)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+#ifdef CONFIG_403GCX
+	stw     r12, 0(r0)
+	stw     r9, 4(r0)
+	mfcr    r11
+	mfspr   r12, SPRN_PID
+	stw     r11, 8(r0)
+	stw     r12, 12(r0)
+#else
+	mtspr	SPRN_SPRG4, r12
+	mtspr	SPRN_SPRG5, r9
+	mfcr	r11
+	mfspr	r12, SPRN_PID
+	mtspr	SPRN_SPRG7, r11
+	mtspr	SPRN_SPRG6, r12
+#endif
+
+	/* First, check if it was a zone fault (which means a user
+	* tried to access a kernel or read-protected page - always
+	* a SEGV).  All other faults here must be stores, so no
+	* need to check ESR_DST as well. */
+	mfspr	r10, SPRN_ESR
+	andis.	r10, r10, ESR_DIZ@h
+	bne	2f
+
+	mfspr	r10, SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	andis.	r11, r10, 0x8000
+	beq	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	li	r9, 0
+	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
+	b	4f
+
+	/* Get the PGD for the current thread.
+	 */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+4:
+	tophys(r11, r11)
+	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
+	lwz	r11, 0(r11)		/* Get L1 entry */
+	rlwinm.	r12, r11, 0, 0, 19	/* Extract L2 (pte) base address */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
+	lwz	r11, 0(r12)		/* Get Linux PTE */
+
+	andi.	r9, r11, _PAGE_RW	/* Is it writeable? */
+	beq	2f			/* Bail if not */
+
+	/* Update 'changed'.
+	*/
+	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+	stw	r11, 0(r12)		/* Update Linux page table */
+
+	/* Most of the Linux PTE is ready to load into the TLB LO.
+	 * We set ZSEL, where only the LS-bit determines user access.
+	 * We set execute, because we don't have the granularity to
+	 * properly set this at the page level (Linux problem).
+	 * If shared is set, we cause a zero PID->TID load.
+	 * Many of these bits are software only.  Bits we don't set
+	 * here we (properly should) assume have the appropriate value.
+	 */
+	li	r12, 0x0ce2
+	andc	r11, r11, r12		/* Make sure 20, 21 are zero */
+
+	/* find the TLB index that caused the fault.  It has to be here.
+	*/
+	tlbsx	r9, 0, r10
+
+	tlbwe	r11, r9, TLB_DATA		/* Load TLB LO */
+
+	/* Done...restore registers and get out of here.
+	*/
+#ifdef CONFIG_403GCX
+	lwz     r12, 12(r0)
+	lwz     r11, 8(r0)
+	mtspr   SPRN_PID, r12
+	mtcr    r11
+	lwz     r9, 4(r0)
+	lwz     r12, 0(r0)
+#else
+	mfspr	r12, SPRN_SPRG6
+	mfspr	r11, SPRN_SPRG7
+	mtspr	SPRN_PID, r12
+	mtcr	r11
+	mfspr	r9, SPRN_SPRG5
+	mfspr	r12, SPRN_SPRG4
+#endif
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	PPC405_ERR77_SYNC
+	rfi			/* Should sync shadow TLBs */
+	b	.		/* prevent prefetch past rfi */
+
+2:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+#ifdef CONFIG_403GCX
+	lwz     r12, 12(r0)
+	lwz     r11, 8(r0)
+	mtspr   SPRN_PID, r12
+	mtcr    r11
+	lwz     r9, 4(r0)
+	lwz     r12, 0(r0)
+#else
+	mfspr	r12, SPRN_SPRG6
+	mfspr	r11, SPRN_SPRG7
+	mtspr	SPRN_PID, r12
+	mtcr	r11
+	mfspr	r9, SPRN_SPRG5
+	mfspr	r12, SPRN_SPRG4
+#endif
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	DataAccess
+
+/*
+ * 0x0400 - Instruction Storage Exception
+ * This is caused by a fetch from non-execute or guarded pages.
+ */
+	START_EXCEPTION(0x0400, InstructionAccess)
+	NORMAL_EXCEPTION_PROLOG
+	mr	r4,r12			/* Pass SRR0 as arg2 */
+	li	r5,0			/* Pass zero as arg3 */
+	EXC_XFER_EE_LITE(0x400, handle_page_fault)
+
+/* 0x0500 - External Interrupt Exception */
+	EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
+
+/* 0x0600 - Alignment Exception */
+	START_EXCEPTION(0x0600, Alignment)
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r4,SPRN_DEAR		/* Grab the DEAR and save it */
+	stw	r4,_DEAR(r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE(0x600, AlignmentException)
+
+/* 0x0700 - Program Exception */
+	START_EXCEPTION(0x0700, ProgramCheck)
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r4,SPRN_ESR		/* Grab the ESR and save it */
+	stw	r4,_ESR(r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_STD(0x700, ProgramCheckException)
+
+	EXCEPTION(0x0800, Trap_08, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x0900, Trap_09, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x0A00, Trap_0A, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x0B00, Trap_0B, UnknownException, EXC_XFER_EE)
+
+/* 0x0C00 - System Call Exception */
+	START_EXCEPTION(0x0C00,	SystemCall)
+	NORMAL_EXCEPTION_PROLOG
+	EXC_XFER_EE_LITE(0xc00, DoSyscall)
+
+	EXCEPTION(0x0D00, Trap_0D, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x0E00, Trap_0E, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x0F00, Trap_0F, UnknownException, EXC_XFER_EE)
+
+/* 0x1000 - Programmable Interval Timer (PIT) Exception */
+	START_EXCEPTION(0x1000, Decrementer)
+	NORMAL_EXCEPTION_PROLOG
+	lis	r0,TSR_PIS@h
+	mtspr	SPRN_TSR,r0		/* Clear the PIT exception */
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_LITE(0x1000, timer_interrupt)
+
+#if 0
+/* NOTE:
+ * FIT and WDT handlers are not implemented yet.
+ */
+
+/* 0x1010 - Fixed Interval Timer (FIT) Exception
+*/
+	STND_EXCEPTION(0x1010,	FITException,		UnknownException)
+
+/* 0x1020 - Watchdog Timer (WDT) Exception
+*/
+
+	CRITICAL_EXCEPTION(0x1020, WDTException, UnknownException)
+#endif
+
+/* 0x1100 - Data TLB Miss Exception
+ * As the name implies, translation is not in the MMU, so search the
+ * page tables and fix it.  The only purpose of this function is to
+ * load TLB entries from the page table if they exist.
+ */
+	START_EXCEPTION(0x1100,	DTLBMiss)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+#ifdef CONFIG_403GCX
+	stw     r12, 0(r0)
+	stw     r9, 4(r0)
+	mfcr    r11
+	mfspr   r12, SPRN_PID
+	stw     r11, 8(r0)
+	stw     r12, 12(r0)
+#else
+	mtspr	SPRN_SPRG4, r12
+	mtspr	SPRN_SPRG5, r9
+	mfcr	r11
+	mfspr	r12, SPRN_PID
+	mtspr	SPRN_SPRG7, r11
+	mtspr	SPRN_SPRG6, r12
+#endif
+	mfspr	r10, SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	andis.	r11, r10, 0x8000
+	beq	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	li	r9, 0
+	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
+	b	4f
+
+	/* Get the PGD for the current thread.
+	 */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+4:
+	tophys(r11, r11)
+	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
+	lwz	r12, 0(r11)		/* Get L1 entry */
+	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
+	lwz	r11, 0(r12)		/* Get Linux PTE */
+	andi.	r9, r11, _PAGE_PRESENT
+	beq	5f
+
+	ori	r11, r11, _PAGE_ACCESSED
+	stw	r11, 0(r12)
+
+	/* Create TLB tag.  This is the faulting address plus a static
+	 * set of bits.  These are size, valid, E, U0.
+	*/
+	li	r12, 0x00c0
+	rlwimi	r10, r12, 0, 20, 31
+
+	b	finish_tlb_load
+
+2:	/* Check for possible large-page pmd entry */
+	rlwinm.	r9, r12, 2, 22, 24
+	beq	5f
+
+	/* Create TLB tag.  This is the faulting address, plus a static
+	 * set of bits (valid, E, U0) plus the size from the PMD.
+	 */
+	ori	r9, r9, 0x40
+	rlwimi	r10, r9, 0, 20, 31
+	mr	r11, r12
+
+	b	finish_tlb_load
+
+5:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+#ifdef CONFIG_403GCX
+	lwz     r12, 12(r0)
+	lwz     r11, 8(r0)
+	mtspr   SPRN_PID, r12
+	mtcr    r11
+	lwz     r9, 4(r0)
+	lwz     r12, 0(r0)
+#else
+	mfspr	r12, SPRN_SPRG6
+	mfspr	r11, SPRN_SPRG7
+	mtspr	SPRN_PID, r12
+	mtcr	r11
+	mfspr	r9, SPRN_SPRG5
+	mfspr	r12, SPRN_SPRG4
+#endif
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	DataAccess
+
+/* 0x1200 - Instruction TLB Miss Exception
+ * Nearly the same as above, except we get our information from different
+ * registers and bailout to a different point.
+ */
+	START_EXCEPTION(0x1200,	ITLBMiss)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+#ifdef CONFIG_403GCX
+	stw     r12, 0(r0)
+	stw     r9, 4(r0)
+	mfcr    r11
+	mfspr   r12, SPRN_PID
+	stw     r11, 8(r0)
+	stw     r12, 12(r0)
+#else
+	mtspr	SPRN_SPRG4, r12
+	mtspr	SPRN_SPRG5, r9
+	mfcr	r11
+	mfspr	r12, SPRN_PID
+	mtspr	SPRN_SPRG7, r11
+	mtspr	SPRN_SPRG6, r12
+#endif
+	mfspr	r10, SPRN_SRR0		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	andis.	r11, r10, 0x8000
+	beq	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	li	r9, 0
+	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
+	b	4f
+
+	/* Get the PGD for the current thread.
+	 */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+4:
+	tophys(r11, r11)
+	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
+	lwz	r12, 0(r11)		/* Get L1 entry */
+	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
+	lwz	r11, 0(r12)		/* Get Linux PTE */
+	andi.	r9, r11, _PAGE_PRESENT
+	beq	5f
+
+	ori	r11, r11, _PAGE_ACCESSED
+	stw	r11, 0(r12)
+
+	/* Create TLB tag.  This is the faulting address plus a static
+	 * set of bits.  These are size, valid, E, U0.
+	*/
+	li	r12, 0x00c0
+	rlwimi	r10, r12, 0, 20, 31
+
+	b	finish_tlb_load
+
+2:	/* Check for possible large-page pmd entry */
+	rlwinm.	r9, r12, 2, 22, 24
+	beq	5f
+
+	/* Create TLB tag.  This is the faulting address, plus a static
+	 * set of bits (valid, E, U0) plus the size from the PMD.
+	 */
+	ori	r9, r9, 0x40
+	rlwimi	r10, r9, 0, 20, 31
+	mr	r11, r12
+
+	b	finish_tlb_load
+
+5:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+#ifdef CONFIG_403GCX
+	lwz     r12, 12(r0)
+	lwz     r11, 8(r0)
+	mtspr   SPRN_PID, r12
+	mtcr    r11
+	lwz     r9, 4(r0)
+	lwz     r12, 0(r0)
+#else
+	mfspr	r12, SPRN_SPRG6
+	mfspr	r11, SPRN_SPRG7
+	mtspr	SPRN_PID, r12
+	mtcr	r11
+	mfspr	r9, SPRN_SPRG5
+	mfspr	r12, SPRN_SPRG4
+#endif
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	InstructionAccess
+
+	EXCEPTION(0x1300, Trap_13, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1400, Trap_14, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1500, Trap_15, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1600, Trap_16, UnknownException, EXC_XFER_EE)
+#ifdef CONFIG_IBM405_ERR51
+	/* 405GP errata 51 */
+	START_EXCEPTION(0x1700, Trap_17)
+	b DTLBMiss
+#else
+	EXCEPTION(0x1700, Trap_17, UnknownException, EXC_XFER_EE)
+#endif
+	EXCEPTION(0x1800, Trap_18, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1900, Trap_19, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1A00, Trap_1A, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1B00, Trap_1B, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1C00, Trap_1C, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1D00, Trap_1D, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1E00, Trap_1E, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1F00, Trap_1F, UnknownException, EXC_XFER_EE)
+
+/* Check for a single step debug exception while in an exception
+ * handler before state has been saved.  This is to catch the case
+ * where an instruction that we are trying to single step causes
+ * an exception (eg ITLB/DTLB miss) and thus the first instruction of
+ * the exception handler generates a single step debug exception.
+ *
+ * If we get a debug trap on the first instruction of an exception handler,
+ * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
+ * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
+ * The exception handler was handling a non-critical interrupt, so it will
+ * save (and later restore) the MSR via SPRN_SRR1, which will still have
+ * the MSR_DE bit set.
+ */
+	/* 0x2000 - Debug Exception */
+	START_EXCEPTION(0x2000, DebugTrap)
+	CRITICAL_EXCEPTION_PROLOG
+
+	/*
+	 * If this is a single step or branch-taken exception in an
+	 * exception entry sequence, it was probably meant to apply to
+	 * the code where the exception occurred (since exception entry
+	 * doesn't turn off DE automatically).  We simulate the effect
+	 * of turning off DE on entry to an exception handler by turning
+	 * off DE in the SRR3 value and clearing the debug status.
+	 */
+	mfspr	r10,SPRN_DBSR		/* check single-step/branch taken */
+	andis.	r10,r10,DBSR_IC@h
+	beq+	2f
+
+	andi.	r10,r9,MSR_IR|MSR_PR	/* check supervisor + MMU off */
+	beq	1f			/* branch and fix it up */
+
+	mfspr   r10,SPRN_SRR2		/* Faulting instruction address */
+	cmplwi  r10,0x2100
+	bgt+    2f			/* address above exception vectors */
+
+	/* here it looks like we got an inappropriate debug exception. */
+1:	rlwinm	r9,r9,0,~MSR_DE		/* clear DE in the SRR3 value */
+	lis	r10,DBSR_IC@h		/* clear the IC event */
+	mtspr	SPRN_DBSR,r10
+	/* restore state and get out */
+	lwz	r10,_CCR(r11)
+	lwz	r0,GPR0(r11)
+	lwz	r1,GPR1(r11)
+	mtcrf	0x80,r10
+	mtspr	SPRN_SRR2,r12
+	mtspr	SPRN_SRR3,r9
+	lwz	r9,GPR9(r11)
+	lwz	r12,GPR12(r11)
+	lwz	r10,crit_r10@l(0)
+	lwz	r11,crit_r11@l(0)
+	PPC405_ERR77_SYNC
+	rfci
+	b	.
+
+	/* continue normal handling for a critical exception... */
+2:	mfspr	r4,SPRN_DBSR
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_TEMPLATE(DebugException, 0x2002, \
+		(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+		NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
+
+/*
+ * The other Data TLB exceptions bail out to this point
+ * if they can't resolve the lightweight TLB fault.
+ */
+DataAccess:
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
+	stw	r5,_ESR(r11)
+	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
+	EXC_XFER_EE_LITE(0x300, handle_page_fault)
+
+/* Other PowerPC processors, namely those derived from the 6xx-series
+ * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
+ * However, for the 4xx-series processors these are neither defined nor
+ * reserved.
+ */
+
+	/* Damn, I came up one instruction too many to fit into the
+	 * exception space :-).  Both the instruction and data TLB
+	 * miss get to this point to load the TLB.
+	 * 	r10 - TLB_TAG value
+	 * 	r11 - Linux PTE
+	 *	r12, r9 - avilable to use
+	 *	PID - loaded with proper value when we get here
+	 *	Upon exit, we reload everything and RFI.
+	 * Actually, it will fit now, but oh well.....a common place
+	 * to load the TLB.
+	 */
+tlb_4xx_index:
+	.long	0
+finish_tlb_load:
+	/* load the next available TLB index.
+	*/
+	lwz	r9, tlb_4xx_index@l(0)
+	addi	r9, r9, 1
+	andi.	r9, r9, (PPC4XX_TLB_SIZE-1)
+	stw	r9, tlb_4xx_index@l(0)
+
+6:
+	/*
+	 * Clear out the software-only bits in the PTE to generate the
+	 * TLB_DATA value.  These are the bottom 2 bits of the RPM, the
+	 * top 3 bits of the zone field, and M.
+	 */
+	li	r12, 0x0ce2
+	andc	r11, r11, r12
+
+	tlbwe	r11, r9, TLB_DATA		/* Load TLB LO */
+	tlbwe	r10, r9, TLB_TAG		/* Load TLB HI */
+
+	/* Done...restore registers and get out of here.
+	*/
+#ifdef CONFIG_403GCX
+	lwz     r12, 12(r0)
+	lwz     r11, 8(r0)
+	mtspr   SPRN_PID, r12
+	mtcr    r11
+	lwz     r9, 4(r0)
+	lwz     r12, 0(r0)
+#else
+	mfspr	r12, SPRN_SPRG6
+	mfspr	r11, SPRN_SPRG7
+	mtspr	SPRN_PID, r12
+	mtcr	r11
+	mfspr	r9, SPRN_SPRG5
+	mfspr	r12, SPRN_SPRG4
+#endif
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	PPC405_ERR77_SYNC
+	rfi			/* Should sync shadow TLBs */
+	b	.		/* prevent prefetch past rfi */
+
+/* extern void giveup_fpu(struct task_struct *prev)
+ *
+ * The PowerPC 4xx family of processors do not have an FPU, so this just
+ * returns.
+ */
+_GLOBAL(giveup_fpu)
+	blr
+
+/* This is where the main kernel code starts.
+ */
+start_here:
+
+	/* ptr to current */
+	lis	r2,init_task@h
+	ori	r2,r2,init_task@l
+
+	/* ptr to phys current thread */
+	tophys(r4,r2)
+	addi	r4,r4,THREAD	/* init task's THREAD */
+	mtspr	SPRN_SPRG3,r4
+
+	/* stack */
+	lis	r1,init_thread_union@ha
+	addi	r1,r1,init_thread_union@l
+	li	r0,0
+	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+
+	bl	early_init	/* We have to do this with MMU on */
+
+/*
+ * Decide what sort of machine this is and initialize the MMU.
+ */
+	mr	r3,r31
+	mr	r4,r30
+	mr	r5,r29
+	mr	r6,r28
+	mr	r7,r27
+	bl	machine_init
+	bl	MMU_init
+
+/* Go back to running unmapped so we can load up new values
+ * and change to using our exception vectors.
+ * On the 4xx, all we have to do is invalidate the TLB to clear
+ * the old 16M byte TLB mappings.
+ */
+	lis	r4,2f@h
+	ori	r4,r4,2f@l
+	tophys(r4,r4)
+	lis	r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
+	ori	r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r3
+	rfi
+	b	.		/* prevent prefetch past rfi */
+
+/* Load up the kernel context */
+2:
+	sync			/* Flush to memory before changing TLB */
+	tlbia
+	isync			/* Flush shadow TLBs */
+
+	/* set up the PTE pointers for the Abatron bdiGDB.
+	*/
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	stw	r5, 0xf0(r0)	/* Must match your Abatron config file */
+	tophys(r5,r5)
+	stw	r6, 0(r5)
+
+/* Now turn on the MMU for real! */
+	lis	r4,MSR_KERNEL@h
+	ori	r4,r4,MSR_KERNEL@l
+	lis	r3,start_kernel@h
+	ori	r3,r3,start_kernel@l
+	mtspr	SPRN_SRR0,r3
+	mtspr	SPRN_SRR1,r4
+	rfi			/* enable MMU and jump to start_kernel */
+	b	.		/* prevent prefetch past rfi */
+
+/* Set up the initial MMU state so we can do the first level of
+ * kernel initialization.  This maps the first 16 MBytes of memory 1:1
+ * virtual to physical and more importantly sets the cache mode.
+ */
+initial_mmu:
+	tlbia			/* Invalidate all TLB entries */
+	isync
+
+	/* We should still be executing code at physical address 0x0000xxxx
+	 * at this point. However, start_here is at virtual address
+	 * 0xC000xxxx. So, set up a TLB mapping to cover this once
+	 * translation is enabled.
+	 */
+
+	lis	r3,KERNELBASE@h		/* Load the kernel virtual address */
+	ori	r3,r3,KERNELBASE@l
+	tophys(r4,r3)			/* Load the kernel physical address */
+
+	iccci	r0,r3			/* Invalidate the i-cache before use */
+
+	/* Load the kernel PID.
+	*/
+	li	r0,0
+	mtspr	SPRN_PID,r0
+	sync
+
+	/* Configure and load two entries into TLB slots 62 and 63.
+	 * In case we are pinning TLBs, these are reserved in by the
+	 * other TLB functions.  If not reserving, then it doesn't
+	 * matter where they are loaded.
+	 */
+	clrrwi	r4,r4,10		/* Mask off the real page number */
+	ori	r4,r4,(TLB_WR | TLB_EX)	/* Set the write and execute bits */
+
+	clrrwi	r3,r3,10		/* Mask off the effective page number */
+	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
+
+        li      r0,63                    /* TLB slot 63 */
+
+	tlbwe	r4,r0,TLB_DATA		/* Load the data portion of the entry */
+	tlbwe	r3,r0,TLB_TAG		/* Load the tag portion of the entry */
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(SERIAL_DEBUG_IO_BASE)
+
+	/* Load a TLB entry for the UART, so that ppc4xx_progress() can use
+	 * the UARTs nice and early.  We use a 4k real==virtual mapping. */
+
+	lis	r3,SERIAL_DEBUG_IO_BASE@h
+	ori	r3,r3,SERIAL_DEBUG_IO_BASE@l
+	mr	r4,r3
+	clrrwi	r4,r4,12
+	ori	r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
+
+	clrrwi	r3,r3,12
+	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+	li	r0,0			/* TLB slot 0 */
+	tlbwe	r4,r0,TLB_DATA
+	tlbwe	r3,r0,TLB_TAG
+#endif /* CONFIG_SERIAL_DEBUG_TEXT && SERIAL_DEBUG_IO_BASE */
+
+	isync
+
+	/* Establish the exception vector base
+	*/
+	lis	r4,KERNELBASE@h		/* EVPR only uses the high 16-bits */
+	tophys(r0,r4)			/* Use the physical address */
+	mtspr	SPRN_EVPR,r0
+
+	blr
+
+_GLOBAL(abort)
+        mfspr   r13,SPRN_DBCR0
+        oris    r13,r13,DBCR0_RST_SYSTEM@h
+        mtspr   SPRN_DBCR0,r13
+
+_GLOBAL(set_context)
+
+#ifdef CONFIG_BDI_SWITCH
+	/* Context switch the PTE pointer for the Abatron BDI2000.
+	 * The PGDIR is the second parameter.
+	 */
+	lis	r5, KERNELBASE@h
+	lwz	r5, 0xf0(r5)
+	stw	r4, 0x4(r5)
+#endif
+	sync
+	mtspr	SPRN_PID,r3
+	isync				/* Need an isync to flush shadow */
+					/* TLBs after changing PID */
+	blr
+
+/* We put a few things here that have to be page-aligned. This stuff
+ * goes at the beginning of the data segment, which is page-aligned.
+ */
+	.data
+_GLOBAL(sdata)
+_GLOBAL(empty_zero_page)
+	.space	4096
+_GLOBAL(swapper_pg_dir)
+	.space	4096
+
+
+/* Stack for handling critical exceptions from kernel mode */
+	.section .bss
+        .align 12
+exception_stack_bottom:
+	.space	4096
+critical_stack_top:
+_GLOBAL(exception_stack_top)
+
+/* This space gets a copy of optional info passed to us by the bootstrap
+ * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+_GLOBAL(cmd_line)
+	.space	512
+
+/* Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+abatron_pteptrs:
+	.space	8
diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S
new file mode 100644
index 00000000000..5a7a64e91fc
--- /dev/null
+++ b/arch/ppc/kernel/head_8xx.S
@@ -0,0 +1,862 @@
+/*
+ *  arch/ppc/kernel/except_8xx.S
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *  MPC8xx modifications by Dan Malek
+ *    Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
+ *
+ *  This file contains low-level support and setup for PowerPC 8xx
+ *  embedded processors, including trap and interrupt dispatch.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/offsets.h>
+
+/* Macro to make the code more readable. */
+#ifdef CONFIG_8xx_CPU6
+#define DO_8xx_CPU6(val, reg)	\
+	li	reg, val;	\
+	stw	reg, 12(r0);	\
+	lwz	reg, 12(r0);
+#else
+#define DO_8xx_CPU6(val, reg)
+#endif
+	.text
+	.globl	_stext
+_stext:
+	.text
+	.globl	_start
+_start:
+
+/* MPC8xx
+ * This port was done on an MBX board with an 860.  Right now I only
+ * support an ELF compressed (zImage) boot from EPPC-Bug because the
+ * code there loads up some registers before calling us:
+ *   r3: ptr to board info data
+ *   r4: initrd_start or if no initrd then 0
+ *   r5: initrd_end - unused if r4 is 0
+ *   r6: Start of command line string
+ *   r7: End of command line string
+ *
+ * I decided to use conditional compilation instead of checking PVR and
+ * adding more processor specific branches around code I don't need.
+ * Since this is an embedded processor, I also appreciate any memory
+ * savings I can get.
+ *
+ * The MPC8xx does not have any BATs, but it supports large page sizes.
+ * We first initialize the MMU to support 8M byte pages, then load one
+ * entry into each of the instruction and data TLBs to map the first
+ * 8M 1:1.  I also mapped an additional I/O space 1:1 so we can get to
+ * the "internal" processor registers before MMU_init is called.
+ *
+ * The TLB code currently contains a major hack.  Since I use the condition
+ * code register, I have to save and restore it.  I am out of registers, so
+ * I just store it in memory location 0 (the TLB handlers are not reentrant).
+ * To avoid making any decisions, I need to use the "segment" valid bit
+ * in the first level table, but that would require many changes to the
+ * Linux page directory/table functions that I don't want to do right now.
+ *
+ * I used to use SPRG2 for a temporary register in the TLB handler, but it
+ * has since been put to other uses.  I now use a hack to save a register
+ * and the CCR at memory location 0.....Someday I'll fix this.....
+ *	-- Dan
+ */
+	.globl	__start
+__start:
+	mr	r31,r3			/* save parameters */
+	mr	r30,r4
+	mr	r29,r5
+	mr	r28,r6
+	mr	r27,r7
+
+	/* We have to turn on the MMU right away so we get cache modes
+	 * set correctly.
+	 */
+	bl	initial_mmu
+
+/* We now have the lower 8 Meg mapped into TLB entries, and the caches
+ * ready to work.
+ */
+
+turn_on_mmu:
+	mfmsr	r0
+	ori	r0,r0,MSR_DR|MSR_IR
+	mtspr	SPRN_SRR1,r0
+	lis	r0,start_here@h
+	ori	r0,r0,start_here@l
+	mtspr	SPRN_SRR0,r0
+	SYNC
+	rfi				/* enables MMU */
+
+/*
+ * Exception entry code.  This code runs with address translation
+ * turned off, i.e. using physical addresses.
+ * We assume sprg3 has the physical address of the current
+ * task's thread_struct.
+ */
+#define EXCEPTION_PROLOG	\
+	mtspr	SPRN_SPRG0,r10;	\
+	mtspr	SPRN_SPRG1,r11;	\
+	mfcr	r10;		\
+	EXCEPTION_PROLOG_1;	\
+	EXCEPTION_PROLOG_2
+
+#define EXCEPTION_PROLOG_1	\
+	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel */ \
+	andi.	r11,r11,MSR_PR;	\
+	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
+	beq	1f;		\
+	mfspr	r11,SPRN_SPRG3;	\
+	lwz	r11,THREAD_INFO-THREAD(r11);	\
+	addi	r11,r11,THREAD_SIZE;	\
+	tophys(r11,r11);	\
+1:	subi	r11,r11,INT_FRAME_SIZE	/* alloc exc. frame */
+
+
+#define EXCEPTION_PROLOG_2	\
+	CLR_TOP32(r11);		\
+	stw	r10,_CCR(r11);		/* save registers */ \
+	stw	r12,GPR12(r11);	\
+	stw	r9,GPR9(r11);	\
+	mfspr	r10,SPRN_SPRG0;	\
+	stw	r10,GPR10(r11);	\
+	mfspr	r12,SPRN_SPRG1;	\
+	stw	r12,GPR11(r11);	\
+	mflr	r10;		\
+	stw	r10,_LINK(r11);	\
+	mfspr	r12,SPRN_SRR0;	\
+	mfspr	r9,SPRN_SRR1;	\
+	stw	r1,GPR1(r11);	\
+	stw	r1,0(r11);	\
+	tovirt(r1,r11);			/* set new kernel sp */	\
+	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
+	MTMSRD(r10);			/* (except for mach check in rtas) */ \
+	stw	r0,GPR0(r11);	\
+	SAVE_4GPRS(3, r11);	\
+	SAVE_2GPRS(7, r11)
+
+/*
+ * Note: code which follows this uses cr0.eq (set if from kernel),
+ * r11, r12 (SRR0), and r9 (SRR1).
+ *
+ * Note2: once we have set r1 we are in a position to take exceptions
+ * again, and we could thus set MSR:RI at that point.
+ */
+
+/*
+ * Exception vectors.
+ */
+#define EXCEPTION(n, label, hdlr, xfer)		\
+	. = n;					\
+label:						\
+	EXCEPTION_PROLOG;			\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
+	xfer(n, hdlr)
+
+#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret)	\
+	li	r10,trap;					\
+	stw	r10,TRAP(r11);					\
+	li	r10,MSR_KERNEL;					\
+	copyee(r10, r9);					\
+	bl	tfer;						\
+i##n:								\
+	.long	hdlr;						\
+	.long	ret
+
+#define COPY_EE(d, s)		rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
+			  ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
+			  ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
+			  ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr)	\
+	EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
+			  ret_from_except)
+
+/* System reset */
+	EXCEPTION(0x100, Reset, UnknownException, EXC_XFER_STD)
+
+/* Machine check */
+	. = 0x200
+MachineCheck:
+	EXCEPTION_PROLOG
+	mfspr r4,SPRN_DAR
+	stw r4,_DAR(r11)
+	mfspr r5,SPRN_DSISR
+	stw r5,_DSISR(r11)
+	addi r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_STD(0x200, MachineCheckException)
+
+/* Data access exception.
+ * This is "never generated" by the MPC8xx.  We jump to it for other
+ * translation errors.
+ */
+	. = 0x300
+DataAccess:
+	EXCEPTION_PROLOG
+	mfspr	r10,SPRN_DSISR
+	stw	r10,_DSISR(r11)
+	mr	r5,r10
+	mfspr	r4,SPRN_DAR
+	EXC_XFER_EE_LITE(0x300, handle_page_fault)
+
+/* Instruction access exception.
+ * This is "never generated" by the MPC8xx.  We jump to it for other
+ * translation errors.
+ */
+	. = 0x400
+InstructionAccess:
+	EXCEPTION_PROLOG
+	mr	r4,r12
+	mr	r5,r9
+	EXC_XFER_EE_LITE(0x400, handle_page_fault)
+
+/* External interrupt */
+	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
+
+/* Alignment exception */
+	. = 0x600
+Alignment:
+	EXCEPTION_PROLOG
+	mfspr	r4,SPRN_DAR
+	stw	r4,_DAR(r11)
+	mfspr	r5,SPRN_DSISR
+	stw	r5,_DSISR(r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE(0x600, AlignmentException)
+
+/* Program check exception */
+	EXCEPTION(0x700, ProgramCheck, ProgramCheckException, EXC_XFER_STD)
+
+/* No FPU on MPC8xx.  This exception is not supposed to happen.
+*/
+	EXCEPTION(0x800, FPUnavailable, UnknownException, EXC_XFER_STD)
+
+/* Decrementer */
+	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
+
+	EXCEPTION(0xa00, Trap_0a, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0xb00, Trap_0b, UnknownException, EXC_XFER_EE)
+
+/* System call */
+	. = 0xc00
+SystemCall:
+	EXCEPTION_PROLOG
+	EXC_XFER_EE_LITE(0xc00, DoSyscall)
+
+/* Single step - not used on 601 */
+	EXCEPTION(0xd00, SingleStep, SingleStepException, EXC_XFER_STD)
+	EXCEPTION(0xe00, Trap_0e, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0xf00, Trap_0f, UnknownException, EXC_XFER_EE)
+
+/* On the MPC8xx, this is a software emulation interrupt.  It occurs
+ * for all unimplemented and illegal instructions.
+ */
+	EXCEPTION(0x1000, SoftEmu, SoftwareEmulation, EXC_XFER_STD)
+
+	. = 0x1100
+/*
+ * For the MPC8xx, this is a software tablewalk to load the instruction
+ * TLB.  It is modelled after the example in the Motorola manual.  The task
+ * switch loads the M_TWB register with the pointer to the first level table.
+ * If we discover there is no second level table (the value is zero), the
+ * plan was to load that into the TLB, which causes another fault into the
+ * TLB Error interrupt where we can handle such problems.  However, that did
+ * not work, so if we discover there is no second level table, we restore
+ * registers and branch to the error exception.  We have to use the MD_xxx
+ * registers for the tablewalk because the equivalent MI_xxx registers
+ * only perform the attribute functions.
+ */
+InstructionTLBMiss:
+#ifdef CONFIG_8xx_CPU6
+	stw	r3, 8(r0)
+#endif
+	DO_8xx_CPU6(0x3f80, r3)
+	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
+	mfcr	r10
+	stw	r10, 0(r0)
+	stw	r11, 4(r0)
+	mfspr	r10, SPRN_SRR0	/* Get effective address of fault */
+	DO_8xx_CPU6(0x3780, r3)
+	mtspr	SPRN_MD_EPN, r10	/* Have to use MD_EPN for walk, MI_EPN can't */
+	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	andi.	r11, r10, 0x0800	/* Address >= 0x80000000 */
+	beq	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	rlwimi	r10, r11, 0, 2, 19
+3:
+	lwz	r11, 0(r10)	/* Get the level 1 entry */
+	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
+	beq	2f		/* If zero, don't try to find a pte */
+
+	/* We have a pte table, so load the MI_TWC with the attributes
+	 * for this "segment."
+	 */
+	ori	r11,r11,1		/* Set valid bit */
+	DO_8xx_CPU6(0x2b80, r3)
+	mtspr	SPRN_MI_TWC, r11	/* Set segment attributes */
+	DO_8xx_CPU6(0x3b80, r3)
+	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
+	mfspr	r11, SPRN_MD_TWC	/* ....and get the pte address */
+	lwz	r10, 0(r11)	/* Get the pte */
+
+	ori	r10, r10, _PAGE_ACCESSED
+	stw	r10, 0(r11)
+
+	/* The Linux PTE won't go exactly into the MMU TLB.
+	 * Software indicator bits 21, 22 and 28 must be clear.
+	 * Software indicator bits 24, 25, 26, and 27 must be
+	 * set.  All other Linux PTE bits control the behavior
+	 * of the MMU.
+	 */
+2:	li	r11, 0x00f0
+	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
+	DO_8xx_CPU6(0x2d80, r3)
+	mtspr	SPRN_MI_RPN, r10	/* Update TLB entry */
+
+	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	lwz	r11, 0(r0)
+	mtcr	r11
+	lwz	r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+	lwz	r3, 8(r0)
+#endif
+	rfi
+
+	. = 0x1200
+DataStoreTLBMiss:
+#ifdef CONFIG_8xx_CPU6
+	stw	r3, 8(r0)
+#endif
+	DO_8xx_CPU6(0x3f80, r3)
+	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
+	mfcr	r10
+	stw	r10, 0(r0)
+	stw	r11, 4(r0)
+	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	andi.	r11, r10, 0x0800
+	beq	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	rlwimi	r10, r11, 0, 2, 19
+3:
+	lwz	r11, 0(r10)	/* Get the level 1 entry */
+	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
+	beq	2f		/* If zero, don't try to find a pte */
+
+	/* We have a pte table, so load fetch the pte from the table.
+	 */
+	ori	r11, r11, 1	/* Set valid bit in physical L2 page */
+	DO_8xx_CPU6(0x3b80, r3)
+	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
+	mfspr	r10, SPRN_MD_TWC	/* ....and get the pte address */
+	lwz	r10, 0(r10)	/* Get the pte */
+
+	/* Insert the Guarded flag into the TWC from the Linux PTE.
+	 * It is bit 27 of both the Linux PTE and the TWC (at least
+	 * I got that right :-).  It will be better when we can put
+	 * this into the Linux pgd/pmd and load it in the operation
+	 * above.
+	 */
+	rlwimi	r11, r10, 0, 27, 27
+	DO_8xx_CPU6(0x3b80, r3)
+	mtspr	SPRN_MD_TWC, r11
+
+	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
+	ori	r10, r10, _PAGE_ACCESSED
+	stw	r10, 0(r11)
+
+	/* The Linux PTE won't go exactly into the MMU TLB.
+	 * Software indicator bits 21, 22 and 28 must be clear.
+	 * Software indicator bits 24, 25, 26, and 27 must be
+	 * set.  All other Linux PTE bits control the behavior
+	 * of the MMU.
+	 */
+2:	li	r11, 0x00f0
+	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
+	DO_8xx_CPU6(0x3d80, r3)
+	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
+
+	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	lwz	r11, 0(r0)
+	mtcr	r11
+	lwz	r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+	lwz	r3, 8(r0)
+#endif
+	rfi
+
+/* This is an instruction TLB error on the MPC8xx.  This could be due
+ * to many reasons, such as executing guarded memory or illegal instruction
+ * addresses.  There is nothing to do but handle a big time error fault.
+ */
+	. = 0x1300
+InstructionTLBError:
+	b	InstructionAccess
+
+/* This is the data TLB error on the MPC8xx.  This could be due to
+ * many reasons, including a dirty update to a pte.  We can catch that
+ * one here, but anything else is an error.  First, we track down the
+ * Linux pte.  If it is valid, write access is allowed, but the
+ * page dirty bit is not set, we will set it and reload the TLB.  For
+ * any other case, we bail out to a higher level function that can
+ * handle it.
+ */
+	. = 0x1400
+DataTLBError:
+#ifdef CONFIG_8xx_CPU6
+	stw	r3, 8(r0)
+#endif
+	DO_8xx_CPU6(0x3f80, r3)
+	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
+	mfcr	r10
+	stw	r10, 0(r0)
+	stw	r11, 4(r0)
+
+	/* First, make sure this was a store operation.
+	*/
+	mfspr	r10, SPRN_DSISR
+	andis.	r11, r10, 0x0200	/* If set, indicates store op */
+	beq	2f
+
+	/* The EA of a data TLB miss is automatically stored in the MD_EPN
+	 * register.  The EA of a data TLB error is automatically stored in
+	 * the DAR, but not the MD_EPN register.  We must copy the 20 most
+	 * significant bits of the EA from the DAR to MD_EPN before we
+	 * start walking the page tables.  We also need to copy the CASID
+	 * value from the M_CASID register.
+	 * Addendum:  The EA of a data TLB error is _supposed_ to be stored
+	 * in DAR, but it seems that this doesn't happen in some cases, such
+	 * as when the error is due to a dcbi instruction to a page with a
+	 * TLB that doesn't have the changed bit set.  In such cases, there
+	 * does not appear to be any way  to recover the EA of the error
+	 * since it is neither in DAR nor MD_EPN.  As a workaround, the
+	 * _PAGE_HWWRITE bit is set for all kernel data pages when the PTEs
+	 * are initialized in mapin_ram().  This will avoid the problem,
+	 * assuming we only use the dcbi instruction on kernel addresses.
+	 */
+	mfspr	r10, SPRN_DAR
+	rlwinm	r11, r10, 0, 0, 19
+	ori	r11, r11, MD_EVALID
+	mfspr	r10, SPRN_M_CASID
+	rlwimi	r11, r10, 0, 28, 31
+	DO_8xx_CPU6(0x3780, r3)
+	mtspr	SPRN_MD_EPN, r11
+
+	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	andi.	r11, r10, 0x0800
+	beq	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	rlwimi	r10, r11, 0, 2, 19
+3:
+	lwz	r11, 0(r10)	/* Get the level 1 entry */
+	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
+	beq	2f		/* If zero, bail */
+
+	/* We have a pte table, so fetch the pte from the table.
+	 */
+	ori	r11, r11, 1		/* Set valid bit in physical L2 page */
+	DO_8xx_CPU6(0x3b80, r3)
+	mtspr	SPRN_MD_TWC, r11		/* Load pte table base address */
+	mfspr	r11, SPRN_MD_TWC		/* ....and get the pte address */
+	lwz	r10, 0(r11)		/* Get the pte */
+
+	andi.	r11, r10, _PAGE_RW	/* Is it writeable? */
+	beq	2f			/* Bail out if not */
+
+	/* Update 'changed', among others.
+	*/
+	ori	r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+	mfspr	r11, SPRN_MD_TWC		/* Get pte address again */
+	stw	r10, 0(r11)		/* and update pte in table */
+
+	/* The Linux PTE won't go exactly into the MMU TLB.
+	 * Software indicator bits 21, 22 and 28 must be clear.
+	 * Software indicator bits 24, 25, 26, and 27 must be
+	 * set.  All other Linux PTE bits control the behavior
+	 * of the MMU.
+	 */
+	li	r11, 0x00f0
+	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
+	DO_8xx_CPU6(0x3d80, r3)
+	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
+
+	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	lwz	r11, 0(r0)
+	mtcr	r11
+	lwz	r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+	lwz	r3, 8(r0)
+#endif
+	rfi
+2:
+	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	lwz	r11, 0(r0)
+	mtcr	r11
+	lwz	r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+	lwz	r3, 8(r0)
+#endif
+	b	DataAccess
+
+	EXCEPTION(0x1500, Trap_15, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1600, Trap_16, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1700, Trap_17, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1800, Trap_18, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1900, Trap_19, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1a00, Trap_1a, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1b00, Trap_1b, UnknownException, EXC_XFER_EE)
+
+/* On the MPC8xx, these next four traps are used for development
+ * support of breakpoints and such.  Someday I will get around to
+ * using them.
+ */
+	EXCEPTION(0x1c00, Trap_1c, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1d00, Trap_1d, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1e00, Trap_1e, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1f00, Trap_1f, UnknownException, EXC_XFER_EE)
+
+	. = 0x2000
+
+	.globl	giveup_fpu
+giveup_fpu:
+	blr
+
+/*
+ * This is where the main kernel code starts.
+ */
+start_here:
+	/* ptr to current */
+	lis	r2,init_task@h
+	ori	r2,r2,init_task@l
+
+	/* ptr to phys current thread */
+	tophys(r4,r2)
+	addi	r4,r4,THREAD	/* init task's THREAD */
+	mtspr	SPRN_SPRG3,r4
+	li	r3,0
+	mtspr	SPRN_SPRG2,r3	/* 0 => r1 has kernel sp */
+
+	/* stack */
+	lis	r1,init_thread_union@ha
+	addi	r1,r1,init_thread_union@l
+	li	r0,0
+	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+
+	bl	early_init	/* We have to do this with MMU on */
+
+/*
+ * Decide what sort of machine this is and initialize the MMU.
+ */
+	mr	r3,r31
+	mr	r4,r30
+	mr	r5,r29
+	mr	r6,r28
+	mr	r7,r27
+	bl	machine_init
+	bl	MMU_init
+
+/*
+ * Go back to running unmapped so we can load up new values
+ * and change to using our exception vectors.
+ * On the 8xx, all we have to do is invalidate the TLB to clear
+ * the old 8M byte TLB mappings and load the page table base register.
+ */
+	/* The right way to do this would be to track it down through
+	 * init's THREAD like the context switch code does, but this is
+	 * easier......until someone changes init's static structures.
+	 */
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
+	tophys(r6,r6)
+#ifdef CONFIG_8xx_CPU6
+	lis	r4, cpu6_errata_word@h
+	ori	r4, r4, cpu6_errata_word@l
+	li	r3, 0x3980
+	stw	r3, 12(r4)
+	lwz	r3, 12(r4)
+#endif
+	mtspr	SPRN_M_TWB, r6
+	lis	r4,2f@h
+	ori	r4,r4,2f@l
+	tophys(r4,r4)
+	li	r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r3
+	rfi
+/* Load up the kernel context */
+2:
+	SYNC			/* Force all PTE updates to finish */
+	tlbia			/* Clear all TLB entries */
+	sync			/* wait for tlbia/tlbie to finish */
+	TLBSYNC			/* ... on all CPUs */
+
+	/* set up the PTE pointers for the Abatron bdiGDB.
+	*/
+	tovirt(r6,r6)
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	stw	r5, 0xf0(r0)	/* Must match your Abatron config file */
+	tophys(r5,r5)
+	stw	r6, 0(r5)
+
+/* Now turn on the MMU for real! */
+	li	r4,MSR_KERNEL
+	lis	r3,start_kernel@h
+	ori	r3,r3,start_kernel@l
+	mtspr	SPRN_SRR0,r3
+	mtspr	SPRN_SRR1,r4
+	rfi			/* enable MMU and jump to start_kernel */
+
+/* Set up the initial MMU state so we can do the first level of
+ * kernel initialization.  This maps the first 8 MBytes of memory 1:1
+ * virtual to physical.  Also, set the cache mode since that is defined
+ * by TLB entries and perform any additional mapping (like of the IMMR).
+ * If configured to pin some TLBs, we pin the first 8 Mbytes of kernel,
+ * 24 Mbytes of data, and the 8M IMMR space.  Anything not covered by
+ * these mappings is mapped by page tables.
+ */
+initial_mmu:
+	tlbia			/* Invalidate all TLB entries */
+#ifdef CONFIG_PIN_TLB
+	lis	r8, MI_RSV4I@h
+	ori	r8, r8, 0x1c00
+#else
+	li	r8, 0
+#endif
+	mtspr	SPRN_MI_CTR, r8	/* Set instruction MMU control */
+
+#ifdef CONFIG_PIN_TLB
+	lis	r10, (MD_RSV4I | MD_RESETVAL)@h
+	ori	r10, r10, 0x1c00
+	mr	r8, r10
+#else
+	lis	r10, MD_RESETVAL@h
+#endif
+#ifndef CONFIG_8xx_COPYBACK
+	oris	r10, r10, MD_WTDEF@h
+#endif
+	mtspr	SPRN_MD_CTR, r10	/* Set data TLB control */
+
+	/* Now map the lower 8 Meg into the TLBs.  For this quick hack,
+	 * we can load the instruction and data TLB registers with the
+	 * same values.
+	 */
+	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
+	ori	r8, r8, MI_EVALID	/* Mark it valid */
+	mtspr	SPRN_MI_EPN, r8
+	mtspr	SPRN_MD_EPN, r8
+	li	r8, MI_PS8MEG		/* Set 8M byte page */
+	ori	r8, r8, MI_SVALID	/* Make it valid */
+	mtspr	SPRN_MI_TWC, r8
+	mtspr	SPRN_MD_TWC, r8
+	li	r8, MI_BOOTINIT		/* Create RPN for address 0 */
+	mtspr	SPRN_MI_RPN, r8		/* Store TLB entry */
+	mtspr	SPRN_MD_RPN, r8
+	lis	r8, MI_Kp@h		/* Set the protection mode */
+	mtspr	SPRN_MI_AP, r8
+	mtspr	SPRN_MD_AP, r8
+
+	/* Map another 8 MByte at the IMMR to get the processor
+	 * internal registers (among other things).
+	 */
+#ifdef CONFIG_PIN_TLB
+	addi	r10, r10, 0x0100
+	mtspr	SPRN_MD_CTR, r10
+#endif
+	mfspr	r9, 638			/* Get current IMMR */
+	andis.	r9, r9, 0xff80		/* Get 8Mbyte boundary */
+
+	mr	r8, r9			/* Create vaddr for TLB */
+	ori	r8, r8, MD_EVALID	/* Mark it valid */
+	mtspr	SPRN_MD_EPN, r8
+	li	r8, MD_PS8MEG		/* Set 8M byte page */
+	ori	r8, r8, MD_SVALID	/* Make it valid */
+	mtspr	SPRN_MD_TWC, r8
+	mr	r8, r9			/* Create paddr for TLB */
+	ori	r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
+	mtspr	SPRN_MD_RPN, r8
+
+#ifdef CONFIG_PIN_TLB
+	/* Map two more 8M kernel data pages.
+	*/
+	addi	r10, r10, 0x0100
+	mtspr	SPRN_MD_CTR, r10
+
+	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
+	addis	r8, r8, 0x0080		/* Add 8M */
+	ori	r8, r8, MI_EVALID	/* Mark it valid */
+	mtspr	SPRN_MD_EPN, r8
+	li	r9, MI_PS8MEG		/* Set 8M byte page */
+	ori	r9, r9, MI_SVALID	/* Make it valid */
+	mtspr	SPRN_MD_TWC, r9
+	li	r11, MI_BOOTINIT	/* Create RPN for address 0 */
+	addis	r11, r11, 0x0080	/* Add 8M */
+	mtspr	SPRN_MD_RPN, r8
+
+	addis	r8, r8, 0x0080		/* Add 8M */
+	mtspr	SPRN_MD_EPN, r8
+	mtspr	SPRN_MD_TWC, r9
+	addis	r11, r11, 0x0080	/* Add 8M */
+	mtspr	SPRN_MD_RPN, r8
+#endif
+
+	/* Since the cache is enabled according to the information we
+	 * just loaded into the TLB, invalidate and enable the caches here.
+	 * We should probably check/set other modes....later.
+	 */
+	lis	r8, IDC_INVALL@h
+	mtspr	SPRN_IC_CST, r8
+	mtspr	SPRN_DC_CST, r8
+	lis	r8, IDC_ENABLE@h
+	mtspr	SPRN_IC_CST, r8
+#ifdef CONFIG_8xx_COPYBACK
+	mtspr	SPRN_DC_CST, r8
+#else
+	/* For a debug option, I left this here to easily enable
+	 * the write through cache mode
+	 */
+	lis	r8, DC_SFWT@h
+	mtspr	SPRN_DC_CST, r8
+	lis	r8, IDC_ENABLE@h
+	mtspr	SPRN_DC_CST, r8
+#endif
+	blr
+
+
+/*
+ * Set up to use a given MMU context.
+ * r3 is context number, r4 is PGD pointer.
+ *
+ * We place the physical address of the new task page directory loaded
+ * into the MMU base register, and set the ASID compare register with
+ * the new "context."
+ */
+_GLOBAL(set_context)
+
+#ifdef CONFIG_BDI_SWITCH
+	/* Context switch the PTE pointer for the Abatron BDI2000.
+	 * The PGDIR is passed as second argument.
+	 */
+	lis	r5, KERNELBASE@h
+	lwz	r5, 0xf0(r5)
+	stw	r4, 0x4(r5)
+#endif
+
+#ifdef CONFIG_8xx_CPU6
+	lis	r6, cpu6_errata_word@h
+	ori	r6, r6, cpu6_errata_word@l
+	tophys	(r4, r4)
+	li	r7, 0x3980
+	stw	r7, 12(r6)
+	lwz	r7, 12(r6)
+        mtspr   SPRN_M_TWB, r4               /* Update MMU base address */
+	li	r7, 0x3380
+	stw	r7, 12(r6)
+	lwz	r7, 12(r6)
+        mtspr   SPRN_M_CASID, r3             /* Update context */
+#else
+        mtspr   SPRN_M_CASID,r3		/* Update context */
+	tophys	(r4, r4)
+	mtspr	SPRN_M_TWB, r4		/* and pgd */
+#endif
+	SYNC
+	blr
+
+#ifdef CONFIG_8xx_CPU6
+/* It's here because it is unique to the 8xx.
+ * It is important we get called with interrupts disabled.  I used to
+ * do that, but it appears that all code that calls this already had
+ * interrupt disabled.
+ */
+	.globl	set_dec_cpu6
+set_dec_cpu6:
+	lis	r7, cpu6_errata_word@h
+	ori	r7, r7, cpu6_errata_word@l
+	li	r4, 0x2c00
+	stw	r4, 8(r7)
+	lwz	r4, 8(r7)
+        mtspr   22, r3		/* Update Decrementer */
+	SYNC
+	blr
+#endif
+
+/*
+ * We put a few things here that have to be page-aligned.
+ * This stuff goes at the beginning of the data segment,
+ * which is page-aligned.
+ */
+	.data
+	.globl	sdata
+sdata:
+	.globl	empty_zero_page
+empty_zero_page:
+	.space	4096
+
+	.globl	swapper_pg_dir
+swapper_pg_dir:
+	.space	4096
+
+/*
+ * This space gets a copy of optional info passed to us by the bootstrap
+ * Used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+	.globl	cmd_line
+cmd_line:
+	.space	512
+
+/* Room for two PTE table poiners, usually the kernel and current user
+ * pointer to their respective root page table (pgdir).
+ */
+abatron_pteptrs:
+	.space	8
+
+#ifdef CONFIG_8xx_CPU6
+	.globl	cpu6_errata_word
+cpu6_errata_word:
+	.space	16
+#endif
+
diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h
new file mode 100644
index 00000000000..884dac916bc
--- /dev/null
+++ b/arch/ppc/kernel/head_booke.h
@@ -0,0 +1,340 @@
+#ifndef __HEAD_BOOKE_H__
+#define __HEAD_BOOKE_H__
+
+/*
+ * Macros used for common Book-e exception handling
+ */
+
+#define SET_IVOR(vector_number, vector_label)		\
+		li	r26,vector_label@l; 		\
+		mtspr	SPRN_IVOR##vector_number,r26;	\
+		sync
+
+#define NORMAL_EXCEPTION_PROLOG						     \
+	mtspr	SPRN_SPRG0,r10;		/* save two registers to work with */\
+	mtspr	SPRN_SPRG1,r11;						     \
+	mtspr	SPRN_SPRG4W,r1;						     \
+	mfcr	r10;			/* save CR in r10 for now	   */\
+	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
+	andi.	r11,r11,MSR_PR;						     \
+	beq	1f;							     \
+	mfspr	r1,SPRN_SPRG3;		/* if from user, start at top of   */\
+	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
+	addi	r1,r1,THREAD_SIZE;					     \
+1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
+	mr	r11,r1;							     \
+	stw	r10,_CCR(r11);          /* save various registers	   */\
+	stw	r12,GPR12(r11);						     \
+	stw	r9,GPR9(r11);						     \
+	mfspr	r10,SPRN_SPRG0;						     \
+	stw	r10,GPR10(r11);						     \
+	mfspr	r12,SPRN_SPRG1;						     \
+	stw	r12,GPR11(r11);						     \
+	mflr	r10;							     \
+	stw	r10,_LINK(r11);						     \
+	mfspr	r10,SPRN_SPRG4R;					     \
+	mfspr	r12,SPRN_SRR0;						     \
+	stw	r10,GPR1(r11);						     \
+	mfspr	r9,SPRN_SRR1;						     \
+	stw	r10,0(r11);						     \
+	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
+	stw	r0,GPR0(r11);						     \
+	SAVE_4GPRS(3, r11);						     \
+	SAVE_2GPRS(7, r11)
+
+/* To handle the additional exception priority levels on 40x and Book-E
+ * processors we allocate a 4k stack per additional priority level. The various
+ * head_xxx.S files allocate space (exception_stack_top) for each priority's
+ * stack times the number of CPUs
+ *
+ * On 40x critical is the only additional level
+ * On 44x/e500 we have critical and machine check
+ *
+ * Additionally we reserve a SPRG for each priority level so we can free up a
+ * GPR to use as the base for indirect access to the exception stacks.  This
+ * is necessary since the MMU is always on, for Book-E parts, and the stacks
+ * are offset from KERNELBASE.
+ *
+ */
+#define BOOKE_EXCEPTION_STACK_SIZE	(8192)
+
+/* CRIT_SPRG only used in critical exception handling */
+#define CRIT_SPRG	SPRN_SPRG2
+/* MCHECK_SPRG only used in critical exception handling */
+#define MCHECK_SPRG	SPRN_SPRG6W
+
+#define MCHECK_STACK_TOP	(exception_stack_top - 4096)
+#define CRIT_STACK_TOP		(exception_stack_top)
+
+#ifdef CONFIG_SMP
+#define BOOKE_LOAD_CRIT_STACK				\
+	mfspr	r8,SPRN_PIR;				\
+	mulli	r8,r8,BOOKE_EXCEPTION_STACK_SIZE;	\
+	neg	r8,r8;					\
+	addis	r8,r8,CRIT_STACK_TOP@ha;		\
+	addi	r8,r8,CRIT_STACK_TOP@l
+#define BOOKE_LOAD_MCHECK_STACK				\
+	mfspr	r8,SPRN_PIR;				\
+	mulli	r8,r8,BOOKE_EXCEPTION_STACK_SIZE;	\
+	neg	r8,r8;					\
+	addis	r8,r8,MCHECK_STACK_TOP@ha;		\
+	addi	r8,r8,MCHECK_STACK_TOP@l
+#else
+#define BOOKE_LOAD_CRIT_STACK				\
+	lis	r8,CRIT_STACK_TOP@h;			\
+	ori	r8,r8,CRIT_STACK_TOP@l
+#define BOOKE_LOAD_MCHECK_STACK				\
+	lis	r8,MCHECK_STACK_TOP@h;			\
+	ori	r8,r8,MCHECK_STACK_TOP@l
+#endif
+
+/*
+ * Exception prolog for critical exceptions.  This is a little different
+ * from the normal exception prolog above since a critical exception
+ * can potentially occur at any point during normal exception processing.
+ * Thus we cannot use the same SPRG registers as the normal prolog above.
+ * Instead we use a portion of the critical exception stack at low physical
+ * addresses.
+ */
+
+#define CRITICAL_EXCEPTION_PROLOG					     \
+	mtspr	CRIT_SPRG,r8;						     \
+	BOOKE_LOAD_CRIT_STACK;		/* r8 points to the crit stack */    \
+	stw	r10,GPR10-INT_FRAME_SIZE(r8);				     \
+	stw	r11,GPR11-INT_FRAME_SIZE(r8);				     \
+	mfcr	r10;			/* save CR in r10 for now	   */\
+	mfspr	r11,SPRN_CSRR1;		/* check whether user or kernel    */\
+	andi.	r11,r11,MSR_PR;						     \
+	mr	r11,r8;							     \
+	mfspr	r8,CRIT_SPRG;						     \
+	beq	1f;							     \
+	/* COMING FROM USER MODE */					     \
+	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
+	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
+	addi	r11,r11,THREAD_SIZE;					     \
+1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
+	stw	r10,_CCR(r11);          /* save various registers	   */\
+	stw	r12,GPR12(r11);						     \
+	stw	r9,GPR9(r11);						     \
+	mflr	r10;							     \
+	stw	r10,_LINK(r11);						     \
+	mfspr	r12,SPRN_DEAR;		/* save DEAR and ESR in the frame  */\
+	stw	r12,_DEAR(r11);		/* since they may have had stuff   */\
+	mfspr	r9,SPRN_ESR;		/* in them at the point where the  */\
+	stw	r9,_ESR(r11);		/* exception was taken		   */\
+	mfspr	r12,SPRN_CSRR0;						     \
+	stw	r1,GPR1(r11);						     \
+	mfspr	r9,SPRN_CSRR1;						     \
+	stw	r1,0(r11);						     \
+	mr	r1,r11;							     \
+	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
+	stw	r0,GPR0(r11);						     \
+	SAVE_4GPRS(3, r11);						     \
+	SAVE_2GPRS(7, r11)
+
+/*
+ * Exception prolog for machine check exceptions.  This is similar to
+ * the critical exception prolog, except that machine check exceptions
+ * have their stack.
+ */
+#define MCHECK_EXCEPTION_PROLOG					     \
+	mtspr	MCHECK_SPRG,r8;						     \
+	BOOKE_LOAD_MCHECK_STACK;	/* r8 points to the mcheck stack   */\
+	stw	r10,GPR10-INT_FRAME_SIZE(r8);				     \
+	stw	r11,GPR11-INT_FRAME_SIZE(r8);				     \
+	mfcr	r10;			/* save CR in r10 for now	   */\
+	mfspr	r11,SPRN_MCSRR1;	/* check whether user or kernel    */\
+	andi.	r11,r11,MSR_PR;						     \
+	mr	r11,r8;							     \
+	mfspr	r8,MCHECK_SPRG;						     \
+	beq	1f;							     \
+	/* COMING FROM USER MODE */					     \
+	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
+	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
+	addi	r11,r11,THREAD_SIZE;					     \
+1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
+	stw	r10,_CCR(r11);          /* save various registers	   */\
+	stw	r12,GPR12(r11);						     \
+	stw	r9,GPR9(r11);						     \
+	mflr	r10;							     \
+	stw	r10,_LINK(r11);						     \
+	mfspr	r12,SPRN_DEAR;		/* save DEAR and ESR in the frame  */\
+	stw	r12,_DEAR(r11);		/* since they may have had stuff   */\
+	mfspr	r9,SPRN_ESR;		/* in them at the point where the  */\
+	stw	r9,_ESR(r11);		/* exception was taken		   */\
+	mfspr	r12,SPRN_MCSRR0;					     \
+	stw	r1,GPR1(r11);						     \
+	mfspr	r9,SPRN_MCSRR1;						     \
+	stw	r1,0(r11);						     \
+	mr	r1,r11;							     \
+	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
+	stw	r0,GPR0(r11);						     \
+	SAVE_4GPRS(3, r11);						     \
+	SAVE_2GPRS(7, r11)
+
+/*
+ * Exception vectors.
+ */
+#define	START_EXCEPTION(label)						     \
+        .align 5;              						     \
+label:
+
+#define FINISH_EXCEPTION(func)					\
+	bl	transfer_to_handler_full;			\
+	.long	func;						\
+	.long	ret_from_except_full
+
+#define EXCEPTION(n, label, hdlr, xfer)				\
+	START_EXCEPTION(label);					\
+	NORMAL_EXCEPTION_PROLOG;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
+	xfer(n, hdlr)
+
+#define CRITICAL_EXCEPTION(n, label, hdlr)			\
+	START_EXCEPTION(label);					\
+	CRITICAL_EXCEPTION_PROLOG;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
+	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+			  NOCOPY, crit_transfer_to_handler, \
+			  ret_from_crit_exc)
+
+#define MCHECK_EXCEPTION(n, label, hdlr)			\
+	START_EXCEPTION(label);					\
+	MCHECK_EXCEPTION_PROLOG;				\
+	mfspr	r5,SPRN_ESR;					\
+	stw	r5,_ESR(r11);					\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
+	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+			  NOCOPY, mcheck_transfer_to_handler,   \
+			  ret_from_mcheck_exc)
+
+#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret)	\
+	li	r10,trap;					\
+	stw	r10,TRAP(r11);					\
+	lis	r10,msr@h;					\
+	ori	r10,r10,msr@l;					\
+	copyee(r10, r9);					\
+	bl	tfer;		 				\
+	.long	hdlr;						\
+	.long	ret
+
+#define COPY_EE(d, s)		rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr)		\
+	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
+			  ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
+			  ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
+			  ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr)	\
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
+			  ret_from_except)
+
+
+/* Check for a single step debug exception while in an exception
+ * handler before state has been saved.  This is to catch the case
+ * where an instruction that we are trying to single step causes
+ * an exception (eg ITLB/DTLB miss) and thus the first instruction of
+ * the exception handler generates a single step debug exception.
+ *
+ * If we get a debug trap on the first instruction of an exception handler,
+ * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
+ * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
+ * The exception handler was handling a non-critical interrupt, so it will
+ * save (and later restore) the MSR via SPRN_CSRR1, which will still have
+ * the MSR_DE bit set.
+ */
+#define DEBUG_EXCEPTION							      \
+	START_EXCEPTION(Debug);						      \
+	CRITICAL_EXCEPTION_PROLOG;					      \
+									      \
+	/*								      \
+	 * If there is a single step or branch-taken exception in an	      \
+	 * exception entry sequence, it was probably meant to apply to	      \
+	 * the code where the exception occurred (since exception entry	      \
+	 * doesn't turn off DE automatically).  We simulate the effect	      \
+	 * of turning off DE on entry to an exception handler by turning      \
+	 * off DE in the CSRR1 value and clearing the debug status.	      \
+	 */								      \
+	mfspr	r10,SPRN_DBSR;		/* check single-step/branch taken */  \
+	andis.	r10,r10,DBSR_IC@h;					      \
+	beq+	2f;							      \
+									      \
+	lis	r10,KERNELBASE@h;	/* check if exception in vectors */   \
+	ori	r10,r10,KERNELBASE@l;					      \
+	cmplw	r12,r10;						      \
+	blt+	2f;			/* addr below exception vectors */    \
+									      \
+	lis	r10,Debug@h;						      \
+	ori	r10,r10,Debug@l;					      \
+	cmplw	r12,r10;						      \
+	bgt+	2f;			/* addr above exception vectors */    \
+									      \
+	/* here it looks like we got an inappropriate debug exception. */     \
+1:	rlwinm	r9,r9,0,~MSR_DE;	/* clear DE in the CSRR1 value */     \
+	lis	r10,DBSR_IC@h;		/* clear the IC event */	      \
+	mtspr	SPRN_DBSR,r10;						      \
+	/* restore state and get out */					      \
+	lwz	r10,_CCR(r11);						      \
+	lwz	r0,GPR0(r11);						      \
+	lwz	r1,GPR1(r11);						      \
+	mtcrf	0x80,r10;						      \
+	mtspr	SPRN_CSRR0,r12;						      \
+	mtspr	SPRN_CSRR1,r9;						      \
+	lwz	r9,GPR9(r11);						      \
+	lwz	r12,GPR12(r11);						      \
+	mtspr	CRIT_SPRG,r8;						      \
+	BOOKE_LOAD_CRIT_STACK;		/* r8 points to the crit stack */     \
+	lwz	r10,GPR10-INT_FRAME_SIZE(r8);				      \
+	lwz	r11,GPR11-INT_FRAME_SIZE(r8);				      \
+	mfspr	r8,CRIT_SPRG;						      \
+									      \
+	rfci;								      \
+	b	.;							      \
+									      \
+	/* continue normal handling for a critical exception... */	      \
+2:	mfspr	r4,SPRN_DBSR;						      \
+	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
+	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
+
+#define INSTRUCTION_STORAGE_EXCEPTION					      \
+	START_EXCEPTION(InstructionStorage)				      \
+	NORMAL_EXCEPTION_PROLOG;					      \
+	mfspr	r5,SPRN_ESR;		/* Grab the ESR and save it */	      \
+	stw	r5,_ESR(r11);						      \
+	mr      r4,r12;                 /* Pass SRR0 as arg2 */		      \
+	li      r5,0;                   /* Pass zero as arg3 */		      \
+	EXC_XFER_EE_LITE(0x0400, handle_page_fault)
+
+#define ALIGNMENT_EXCEPTION						      \
+	START_EXCEPTION(Alignment)					      \
+	NORMAL_EXCEPTION_PROLOG;					      \
+	mfspr   r4,SPRN_DEAR;           /* Grab the DEAR and save it */	      \
+	stw     r4,_DEAR(r11);						      \
+	addi    r3,r1,STACK_FRAME_OVERHEAD;				      \
+	EXC_XFER_EE(0x0600, AlignmentException)
+
+#define PROGRAM_EXCEPTION						      \
+	START_EXCEPTION(Program)					      \
+	NORMAL_EXCEPTION_PROLOG;					      \
+	mfspr	r4,SPRN_ESR;		/* Grab the ESR and save it */	      \
+	stw	r4,_ESR(r11);						      \
+	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
+	EXC_XFER_STD(0x0700, ProgramCheckException)
+
+#define DECREMENTER_EXCEPTION						      \
+	START_EXCEPTION(Decrementer)					      \
+	NORMAL_EXCEPTION_PROLOG;					      \
+	lis     r0,TSR_DIS@h;           /* Setup the DEC interrupt mask */    \
+	mtspr   SPRN_TSR,r0;		/* Clear the DEC interrupt */	      \
+	addi    r3,r1,STACK_FRAME_OVERHEAD;				      \
+	EXC_XFER_LITE(0x0900, timer_interrupt)
+
+#endif /* __HEAD_BOOKE_H__ */
diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S
new file mode 100644
index 00000000000..dea19c216fc
--- /dev/null
+++ b/arch/ppc/kernel/head_fsl_booke.S
@@ -0,0 +1,952 @@
+/*
+ * arch/ppc/kernel/head_fsl_booke.S
+ *
+ * Kernel execution entry point code.
+ *
+ *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ *      Initial PowerPC version.
+ *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *      Rewritten for PReP
+ *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ *      Low-level exception handers, MMU support, and rewrite.
+ *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ *      PowerPC 8xx modifications.
+ *    Copyright (c) 1998-1999 TiVo, Inc.
+ *      PowerPC 403GCX modifications.
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *      PowerPC 403GCX/405GP modifications.
+ *    Copyright 2000 MontaVista Software Inc.
+ *	PPC405 modifications
+ *      PowerPC 403GCX/405GP modifications.
+ * 	Author: MontaVista Software, Inc.
+ *         	frank_rowand@mvista.com or source@mvista.com
+ * 	   	debbie_chu@mvista.com
+ *    Copyright 2002-2004 MontaVista Software, Inc.
+ *      PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
+ *    Copyright 2004 Freescale Semiconductor, Inc
+ *      PowerPC e500 modifications, Kumar Gala <kumar.gala@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/offsets.h>
+#include "head_booke.h"
+
+/* As with the other PowerPC ports, it is expected that when code
+ * execution begins here, the following registers contain valid, yet
+ * optional, information:
+ *
+ *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
+ *   r4 - Starting address of the init RAM disk
+ *   r5 - Ending address of the init RAM disk
+ *   r6 - Start of kernel command line string (e.g. "mem=128")
+ *   r7 - End of kernel command line string
+ *
+ */
+	.text
+_GLOBAL(_stext)
+_GLOBAL(_start)
+	/*
+	 * Reserve a word at a fixed location to store the address
+	 * of abatron_pteptrs
+	 */
+	nop
+/*
+ * Save parameters we are passed
+ */
+	mr	r31,r3
+	mr	r30,r4
+	mr	r29,r5
+	mr	r28,r6
+	mr	r27,r7
+	li	r24,0		/* CPU number */
+
+/* We try to not make any assumptions about how the boot loader
+ * setup or used the TLBs.  We invalidate all mappings from the
+ * boot loader and load a single entry in TLB1[0] to map the
+ * first 16M of kernel memory.  Any boot info passed from the
+ * bootloader needs to live in this first 16M.
+ *
+ * Requirement on bootloader:
+ *  - The page we're executing in needs to reside in TLB1 and
+ *    have IPROT=1.  If not an invalidate broadcast could
+ *    evict the entry we're currently executing in.
+ *
+ *  r3 = Index of TLB1 were executing in
+ *  r4 = Current MSR[IS]
+ *  r5 = Index of TLB1 temp mapping
+ *
+ * Later in mapin_ram we will correctly map lowmem, and resize TLB1[0]
+ * if needed
+ */
+
+/* 1. Find the index of the entry we're executing in */
+	bl	invstr				/* Find our address */
+invstr:	mflr	r6				/* Make it accessible */
+	mfmsr	r7
+	rlwinm	r4,r7,27,31,31			/* extract MSR[IS] */
+	mfspr	r7, SPRN_PID0
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID0 */
+	mfspr	r7,SPRN_MAS1
+	andis.	r7,r7,MAS1_VALID@h
+	bne	match_TLB
+	mfspr	r7,SPRN_PID1
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID1 */
+	mfspr	r7,SPRN_MAS1
+	andis.	r7,r7,MAS1_VALID@h
+	bne	match_TLB
+	mfspr	r7, SPRN_PID2
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* Fall through, we had to match */
+match_TLB:
+	mfspr	r7,SPRN_MAS0
+	rlwinm	r3,r7,16,20,31			/* Extract MAS0(Entry) */
+
+	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
+	oris	r7,r7,MAS1_IPROT@h
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+
+/* 2. Invalidate all entries except the entry we're executing in */
+	mfspr	r9,SPRN_TLB1CFG
+	andi.	r9,r9,0xfff
+	li	r6,0				/* Set Entry counter to 0 */
+1:	lis	r7,0x1000			/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r7,SPRN_MAS1
+	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
+	cmpw	r3,r6
+	beq	skpinv				/* Dont update the current execution TLB */
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+	isync
+skpinv:	addi	r6,r6,1				/* Increment */
+	cmpw	r6,r9				/* Are we done? */
+	bne	1b				/* If not, repeat */
+
+	/* Invalidate TLB0 */
+	li      r6,0x04
+	tlbivax 0,r6
+#ifdef CONFIG_SMP
+	tlbsync
+#endif
+	/* Invalidate TLB1 */
+	li      r6,0x0c
+	tlbivax 0,r6
+#ifdef CONFIG_SMP
+	tlbsync
+#endif
+	msync
+
+/* 3. Setup a temp mapping and jump to it */
+	andi.	r5, r3, 0x1	/* Find an entry not used and is non-zero */
+	addi	r5, r5, 0x1
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+
+	/* Just modify the entry ID and EPN for the temp mapping */
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
+	mtspr	SPRN_MAS0,r7
+	xori	r6,r4,1		/* Setup TMP mapping in the other Address space */
+	slwi	r6,r6,12
+	oris	r6,r6,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
+	mtspr	SPRN_MAS1,r6
+	mfspr	r6,SPRN_MAS2
+	li	r7,0		/* temp EPN = 0 */
+	rlwimi	r7,r6,0,20,31
+	mtspr	SPRN_MAS2,r7
+	tlbwe
+
+	xori	r6,r4,1
+	slwi	r6,r6,5		/* setup new context with other address space */
+	bl	1f		/* Find our address */
+1:	mflr	r9
+	rlwimi	r7,r9,0,20,31
+	addi	r7,r7,24
+	mtspr	SPRN_SRR0,r7
+	mtspr	SPRN_SRR1,r6
+	rfi
+
+/* 4. Clear out PIDs & Search info */
+	li	r6,0
+	mtspr	SPRN_PID0,r6
+	mtspr	SPRN_PID1,r6
+	mtspr	SPRN_PID2,r6
+	mtspr	SPRN_MAS6,r6
+
+/* 5. Invalidate mapping we started in */
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	li	r6,0
+	mtspr	SPRN_MAS1,r6
+	tlbwe
+	/* Invalidate TLB1 */
+	li      r9,0x0c
+	tlbivax 0,r9
+#ifdef CONFIG_SMP
+	tlbsync
+#endif
+	msync
+
+/* 6. Setup KERNELBASE mapping in TLB1[0] */
+	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
+	mtspr	SPRN_MAS0,r6
+	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_16M))@l
+	mtspr	SPRN_MAS1,r6
+	li	r7,0
+	lis	r6,KERNELBASE@h
+	ori	r6,r6,KERNELBASE@l
+	rlwimi	r6,r7,0,20,31
+	mtspr	SPRN_MAS2,r6
+	li	r7,(MAS3_SX|MAS3_SW|MAS3_SR)
+	mtspr	SPRN_MAS3,r7
+	tlbwe
+
+/* 7. Jump to KERNELBASE mapping */
+	li	r7,0
+	bl	1f			/* Find our address */
+1:	mflr	r9
+	rlwimi	r6,r9,0,20,31
+	addi	r6,r6,24
+	mtspr	SPRN_SRR0,r6
+	mtspr	SPRN_SRR1,r7
+	rfi				/* start execution out of TLB1[0] entry */
+
+/* 8. Clear out the temp mapping */
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mtspr	SPRN_MAS1,r8
+	tlbwe
+	/* Invalidate TLB1 */
+	li      r9,0x0c
+	tlbivax 0,r9
+#ifdef CONFIG_SMP
+	tlbsync
+#endif
+	msync
+
+	/* Establish the interrupt vector offsets */
+	SET_IVOR(0,  CriticalInput);
+	SET_IVOR(1,  MachineCheck);
+	SET_IVOR(2,  DataStorage);
+	SET_IVOR(3,  InstructionStorage);
+	SET_IVOR(4,  ExternalInput);
+	SET_IVOR(5,  Alignment);
+	SET_IVOR(6,  Program);
+	SET_IVOR(7,  FloatingPointUnavailable);
+	SET_IVOR(8,  SystemCall);
+	SET_IVOR(9,  AuxillaryProcessorUnavailable);
+	SET_IVOR(10, Decrementer);
+	SET_IVOR(11, FixedIntervalTimer);
+	SET_IVOR(12, WatchdogTimer);
+	SET_IVOR(13, DataTLBError);
+	SET_IVOR(14, InstructionTLBError);
+	SET_IVOR(15, Debug);
+	SET_IVOR(32, SPEUnavailable);
+	SET_IVOR(33, SPEFloatingPointData);
+	SET_IVOR(34, SPEFloatingPointRound);
+	SET_IVOR(35, PerformanceMonitor);
+
+	/* Establish the interrupt vector base */
+	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
+	mtspr	SPRN_IVPR,r4
+
+	/* Setup the defaults for TLB entries */
+	li	r2,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l
+   	mtspr	SPRN_MAS4, r2
+
+#if 0
+	/* Enable DOZE */
+	mfspr	r2,SPRN_HID0
+	oris	r2,r2,HID0_DOZE@h
+	mtspr	SPRN_HID0, r2
+#endif
+
+	/*
+	 * This is where the main kernel code starts.
+	 */
+
+	/* ptr to current */
+	lis	r2,init_task@h
+	ori	r2,r2,init_task@l
+
+	/* ptr to current thread */
+	addi	r4,r2,THREAD	/* init task's THREAD */
+	mtspr	SPRN_SPRG3,r4
+
+	/* stack */
+	lis	r1,init_thread_union@h
+	ori	r1,r1,init_thread_union@l
+	li	r0,0
+	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+
+	bl	early_init
+
+	mfspr	r3,SPRN_TLB1CFG
+	andi.	r3,r3,0xfff
+	lis	r4,num_tlbcam_entries@ha
+	stw	r3,num_tlbcam_entries@l(r4)
+/*
+ * Decide what sort of machine this is and initialize the MMU.
+ */
+	mr	r3,r31
+	mr	r4,r30
+	mr	r5,r29
+	mr	r6,r28
+	mr	r7,r27
+	bl	machine_init
+	bl	MMU_init
+
+	/* Setup PTE pointers for the Abatron bdiGDB */
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	lis	r4, KERNELBASE@h
+	ori	r4, r4, KERNELBASE@l
+	stw	r5, 0(r4)	/* Save abatron_pteptrs at a fixed location */
+	stw	r6, 0(r5)
+
+	/* Let's move on */
+	lis	r4,start_kernel@h
+	ori	r4,r4,start_kernel@l
+	lis	r3,MSR_KERNEL@h
+	ori	r3,r3,MSR_KERNEL@l
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r3
+	rfi			/* change context and jump to start_kernel */
+
+/*
+ * Interrupt vector entry code
+ *
+ * The Book E MMUs are always on so we don't need to handle
+ * interrupts in real mode as with previous PPC processors. In
+ * this case we handle interrupts in the kernel virtual address
+ * space.
+ *
+ * Interrupt vectors are dynamically placed relative to the
+ * interrupt prefix as determined by the address of interrupt_base.
+ * The interrupt vectors offsets are programmed using the labels
+ * for each interrupt vector entry.
+ *
+ * Interrupt vectors must be aligned on a 16 byte boundary.
+ * We align on a 32 byte cache line boundary for good measure.
+ */
+
+interrupt_base:
+	/* Critical Input Interrupt */
+	CRITICAL_EXCEPTION(0x0100, CriticalInput, UnknownException)
+
+	/* Machine Check Interrupt */
+	MCHECK_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+
+	/* Data Storage Interrupt */
+	START_EXCEPTION(DataStorage)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG4W, r12
+	mtspr	SPRN_SPRG5W, r13
+	mfcr	r11
+	mtspr	SPRN_SPRG7W, r11
+
+	/*
+	 * Check if it was a store fault, if not then bail
+	 * because a user tried to access a kernel or
+	 * read-protected page.  Otherwise, get the
+	 * offending address and handle it.
+	 */
+	mfspr	r10, SPRN_ESR
+	andis.	r10, r10, ESR_ST@h
+	beq	2f
+
+	mfspr	r10, SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11, TASK_SIZE@h
+	ori	r11, r11, TASK_SIZE@l
+	cmplw	0, r10, r11
+	bge	2f
+
+	/* Get the PGD for the current thread */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+4:
+	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
+	lwz	r11, 0(r11)		/* Get L1 entry */
+	rlwinm.	r12, r11, 0, 0, 19	/* Extract L2 (pte) base address */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
+	lwz	r11, 0(r12)		/* Get Linux PTE */
+
+	/* Are _PAGE_USER & _PAGE_RW set & _PAGE_HWWRITE not? */
+	andi.	r13, r11, _PAGE_RW|_PAGE_USER|_PAGE_HWWRITE
+	cmpwi	0, r13, _PAGE_RW|_PAGE_USER
+	bne	2f			/* Bail if not */
+
+	/* Update 'changed'. */
+	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+	stw	r11, 0(r12)		/* Update Linux page table */
+
+	/* MAS2 not updated as the entry does exist in the tlb, this
+	   fault taken to detect state transition (eg: COW -> DIRTY)
+	 */
+	lis	r12, MAS3_RPN@h
+	ori	r12, r12, _PAGE_HWEXEC | MAS3_RPN@l
+	and	r11, r11, r12
+	rlwimi	r11, r11, 31, 27, 27	/* SX <- _PAGE_HWEXEC */
+	ori     r11, r11, (MAS3_UW|MAS3_SW|MAS3_UR|MAS3_SR)@l /* set static perms */
+
+	/* update search PID in MAS6, AS = 0 */
+	mfspr	r12, SPRN_PID0
+	slwi	r12, r12, 16
+	mtspr	SPRN_MAS6, r12
+
+	/* find the TLB index that caused the fault.  It has to be here. */
+	tlbsx	0, r10
+
+	mtspr	SPRN_MAS3,r11
+	tlbwe
+
+	/* Done...restore registers and get out of here.  */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	rfi			/* Force context change */
+
+2:
+	/*
+	 * The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	data_access
+
+	/* Instruction Storage Interrupt */
+	INSTRUCTION_STORAGE_EXCEPTION
+
+	/* External Input Interrupt */
+	EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
+
+	/* Alignment Interrupt */
+	ALIGNMENT_EXCEPTION
+
+	/* Program Interrupt */
+	PROGRAM_EXCEPTION
+
+	/* Floating Point Unavailable Interrupt */
+	EXCEPTION(0x0800, FloatingPointUnavailable, UnknownException, EXC_XFER_EE)
+
+	/* System Call Interrupt */
+	START_EXCEPTION(SystemCall)
+	NORMAL_EXCEPTION_PROLOG
+	EXC_XFER_EE_LITE(0x0c00, DoSyscall)
+
+	/* Auxillary Processor Unavailable Interrupt */
+	EXCEPTION(0x2900, AuxillaryProcessorUnavailable, UnknownException, EXC_XFER_EE)
+
+	/* Decrementer Interrupt */
+	DECREMENTER_EXCEPTION
+
+	/* Fixed Internal Timer Interrupt */
+	/* TODO: Add FIT support */
+	EXCEPTION(0x3100, FixedIntervalTimer, UnknownException, EXC_XFER_EE)
+
+	/* Watchdog Timer Interrupt */
+	/* TODO: Add watchdog support */
+	CRITICAL_EXCEPTION(0x3200, WatchdogTimer, UnknownException)
+
+	/* Data TLB Error Interrupt */
+	START_EXCEPTION(DataTLBError)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG4W, r12
+	mtspr	SPRN_SPRG5W, r13
+	mfcr	r11
+	mtspr	SPRN_SPRG7W, r11
+	mfspr	r10, SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11, TASK_SIZE@h
+	ori	r11, r11, TASK_SIZE@l
+	cmplw	5, r10, r11
+	blt	5, 3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+
+	mfspr	r12,SPRN_MAS1		/* Set TID to 0 */
+	rlwinm	r12,r12,0,16,1
+	mtspr	SPRN_MAS1,r12
+
+	b	4f
+
+	/* Get the PGD for the current thread */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+
+4:
+	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
+	lwz	r11, 0(r11)		/* Get L1 entry */
+	rlwinm.	r12, r11, 0, 0, 19	/* Extract L2 (pte) base address */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
+	lwz	r11, 0(r12)		/* Get Linux PTE */
+	andi.	r13, r11, _PAGE_PRESENT
+	beq	2f
+
+	ori	r11, r11, _PAGE_ACCESSED
+	stw	r11, 0(r12)
+
+	 /* Jump to common tlb load */
+	b	finish_tlb_load
+2:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	data_access
+
+	/* Instruction TLB Error Interrupt */
+	/*
+	 * Nearly the same as above, except we get our
+	 * information from different registers and bailout
+	 * to a different point.
+	 */
+	START_EXCEPTION(InstructionTLBError)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG4W, r12
+	mtspr	SPRN_SPRG5W, r13
+	mfcr	r11
+	mtspr	SPRN_SPRG7W, r11
+	mfspr	r10, SPRN_SRR0		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11, TASK_SIZE@h
+	ori	r11, r11, TASK_SIZE@l
+	cmplw	5, r10, r11
+	blt	5, 3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+
+	mfspr	r12,SPRN_MAS1		/* Set TID to 0 */
+	rlwinm	r12,r12,0,16,1
+	mtspr	SPRN_MAS1,r12
+
+	b	4f
+
+	/* Get the PGD for the current thread */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+
+4:
+	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
+	lwz	r11, 0(r11)		/* Get L1 entry */
+	rlwinm.	r12, r11, 0, 0, 19	/* Extract L2 (pte) base address */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
+	lwz	r11, 0(r12)		/* Get Linux PTE */
+	andi.	r13, r11, _PAGE_PRESENT
+	beq	2f
+
+	ori	r11, r11, _PAGE_ACCESSED
+	stw	r11, 0(r12)
+
+	/* Jump to common TLB load point */
+	b	finish_tlb_load
+
+2:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	InstructionStorage
+
+#ifdef CONFIG_SPE
+	/* SPE Unavailable */
+	START_EXCEPTION(SPEUnavailable)
+	NORMAL_EXCEPTION_PROLOG
+	bne	load_up_spe
+	addi    r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE_LITE(0x2010, KernelSPE)
+#else
+	EXCEPTION(0x2020, SPEUnavailable, UnknownException, EXC_XFER_EE)
+#endif /* CONFIG_SPE */
+
+	/* SPE Floating Point Data */
+#ifdef CONFIG_SPE
+	EXCEPTION(0x2030, SPEFloatingPointData, SPEFloatingPointException, EXC_XFER_EE);
+#else
+	EXCEPTION(0x2040, SPEFloatingPointData, UnknownException, EXC_XFER_EE)
+#endif /* CONFIG_SPE */
+
+	/* SPE Floating Point Round */
+	EXCEPTION(0x2050, SPEFloatingPointRound, UnknownException, EXC_XFER_EE)
+
+	/* Performance Monitor */
+	EXCEPTION(0x2060, PerformanceMonitor, PerformanceMonitorException, EXC_XFER_STD)
+
+
+	/* Debug Interrupt */
+	DEBUG_EXCEPTION
+
+/*
+ * Local functions
+ */
+	/*
+	 * Data TLB exceptions will bail out to this point
+	 * if they can't resolve the lightweight TLB fault.
+	 */
+data_access:
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
+	stw	r5,_ESR(r11)
+	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
+	andis.	r10,r5,(ESR_ILK|ESR_DLK)@h
+	bne	1f
+	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+1:
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE_LITE(0x0300, CacheLockingException)
+
+/*
+
+ * Both the instruction and data TLB miss get to this
+ * point to load the TLB.
+ * 	r10 - EA of fault
+ * 	r11 - TLB (info from Linux PTE)
+ * 	r12, r13 - available to use
+ * 	CR5 - results of addr < TASK_SIZE
+ *	MAS0, MAS1 - loaded with proper value when we get here
+ *	MAS2, MAS3 - will need additional info from Linux PTE
+ *	Upon exit, we reload everything and RFI.
+ */
+finish_tlb_load:
+	/*
+	 * We set execute, because we don't have the granularity to
+	 * properly set this at the page level (Linux problem).
+	 * Many of these bits are software only.  Bits we don't set
+	 * here we (properly should) assume have the appropriate value.
+	 */
+
+	mfspr	r12, SPRN_MAS2
+	rlwimi	r12, r11, 26, 27, 31	/* extract WIMGE from pte */
+	mtspr	SPRN_MAS2, r12
+
+	bge	5, 1f
+
+	/* addr > TASK_SIZE */
+	li	r10, (MAS3_UX | MAS3_UW | MAS3_UR)
+	andi.	r13, r11, (_PAGE_USER | _PAGE_HWWRITE | _PAGE_HWEXEC)
+	andi.	r12, r11, _PAGE_USER	/* Test for _PAGE_USER */
+	iseleq	r12, 0, r10
+	and	r10, r12, r13
+	srwi	r12, r10, 1
+	or	r12, r12, r10	/* Copy user perms into supervisor */
+	b	2f
+
+	/* addr <= TASK_SIZE */
+1:	rlwinm	r12, r11, 31, 29, 29	/* Extract _PAGE_HWWRITE into SW */
+	ori	r12, r12, (MAS3_SX | MAS3_SR)
+
+2:	rlwimi	r11, r12, 0, 20, 31	/* Extract RPN from PTE and merge with perms */
+	mtspr	SPRN_MAS3, r11
+	tlbwe
+
+	/* Done...restore registers and get out of here.  */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	rfi					/* Force context change */
+
+#ifdef CONFIG_SPE
+/* Note that the SPE support is closely modeled after the AltiVec
+ * support.  Changes to one are likely to be applicable to the
+ * other!  */
+load_up_spe:
+/*
+ * Disable SPE for the task which had SPE previously,
+ * and save its SPE registers in its thread_struct.
+ * Enables SPE for use in the kernel on return.
+ * On SMP we know the SPE units are free, since we give it up every
+ * switch.  -- Kumar
+ */
+	mfmsr	r5
+	oris	r5,r5,MSR_SPE@h
+	mtmsr	r5			/* enable use of SPE now */
+	isync
+/*
+ * For SMP, we don't do lazy SPE switching because it just gets too
+ * horrendously complex, especially when a task switches from one CPU
+ * to another.  Instead we call giveup_spe in switch_to.
+ */
+#ifndef CONFIG_SMP
+	lis	r3,last_task_used_spe@ha
+	lwz	r4,last_task_used_spe@l(r3)
+	cmpi	0,r4,0
+	beq	1f
+	addi	r4,r4,THREAD	/* want THREAD of last_task_used_spe */
+	SAVE_32EVR(0,r10,r4)
+   	evxor	evr10, evr10, evr10	/* clear out evr10 */
+	evmwumiaa evr10, evr10, evr10	/* evr10 <- ACC = 0 * 0 + ACC */
+	li	r5,THREAD_ACC
+   	evstddx	evr10, r4, r5		/* save off accumulator */
+	lwz	r5,PT_REGS(r4)
+	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r10,MSR_SPE@h
+	andc	r4,r4,r10	/* disable SPE for previous task */
+	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+	/* enable use of SPE after return */
+	oris	r9,r9,MSR_SPE@h
+	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
+	li	r4,1
+	li	r10,THREAD_ACC
+	stw	r4,THREAD_USED_SPE(r5)
+	evlddx	evr4,r10,r5
+	evmra	evr4,evr4
+	REST_32EVR(0,r10,r5)
+#ifndef CONFIG_SMP
+	subi	r4,r5,THREAD
+	stw	r4,last_task_used_spe@l(r3)
+#endif /* CONFIG_SMP */
+	/* restore registers and return */
+2:	REST_4GPRS(3, r11)
+	lwz	r10,_CCR(r11)
+	REST_GPR(1, r11)
+	mtcr	r10
+	lwz	r10,_LINK(r11)
+	mtlr	r10
+	REST_GPR(10, r11)
+	mtspr	SPRN_SRR1,r9
+	mtspr	SPRN_SRR0,r12
+	REST_GPR(9, r11)
+	REST_GPR(12, r11)
+	lwz	r11,GPR11(r11)
+	SYNC
+	rfi
+
+/*
+ * SPE unavailable trap from kernel - print a message, but let
+ * the task use SPE in the kernel until it returns to user mode.
+ */
+KernelSPE:
+	lwz	r3,_MSR(r1)
+	oris	r3,r3,MSR_SPE@h
+	stw	r3,_MSR(r1)	/* enable use of SPE after return */
+	lis	r3,87f@h
+	ori	r3,r3,87f@l
+	mr	r4,r2		/* current */
+	lwz	r5,_NIP(r1)
+	bl	printk
+	b	ret_from_except
+87:	.string	"SPE used in kernel  (task=%p, pc=%x)  \n"
+	.align	4,0
+
+#endif /* CONFIG_SPE */
+
+/*
+ * Global functions
+ */
+
+/*
+ * extern void loadcam_entry(unsigned int index)
+ *
+ * Load TLBCAM[index] entry in to the L2 CAM MMU
+ */
+_GLOBAL(loadcam_entry)
+	lis	r4,TLBCAM@ha
+	addi	r4,r4,TLBCAM@l
+	mulli	r5,r3,20
+	add	r3,r5,r4
+	lwz	r4,0(r3)
+	mtspr	SPRN_MAS0,r4
+	lwz	r4,4(r3)
+	mtspr	SPRN_MAS1,r4
+	lwz	r4,8(r3)
+	mtspr	SPRN_MAS2,r4
+	lwz	r4,12(r3)
+	mtspr	SPRN_MAS3,r4
+	tlbwe
+	isync
+	blr
+
+/*
+ * extern void giveup_altivec(struct task_struct *prev)
+ *
+ * The e500 core does not have an AltiVec unit.
+ */
+_GLOBAL(giveup_altivec)
+	blr
+
+#ifdef CONFIG_SPE
+/*
+ * extern void giveup_spe(struct task_struct *prev)
+ *
+ */
+_GLOBAL(giveup_spe)
+	mfmsr	r5
+	oris	r5,r5,MSR_SPE@h
+	SYNC
+	mtmsr	r5			/* enable use of SPE now */
+	isync
+	cmpi	0,r3,0
+	beqlr-				/* if no previous owner, done */
+	addi	r3,r3,THREAD		/* want THREAD of task */
+	lwz	r5,PT_REGS(r3)
+	cmpi	0,r5,0
+	SAVE_32EVR(0, r4, r3)
+   	evxor	evr6, evr6, evr6	/* clear out evr6 */
+	evmwumiaa evr6, evr6, evr6	/* evr6 <- ACC = 0 * 0 + ACC */
+	li	r4,THREAD_ACC
+   	evstddx	evr6, r4, r3		/* save off accumulator */
+	mfspr	r6,SPRN_SPEFSCR
+	stw	r6,THREAD_SPEFSCR(r3)	/* save spefscr register value */
+	beq	1f
+	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r3,MSR_SPE@h
+	andc	r4,r4,r3		/* disable SPE for previous task */
+	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+	li	r5,0
+	lis	r4,last_task_used_spe@ha
+	stw	r5,last_task_used_spe@l(r4)
+#endif /* CONFIG_SMP */
+	blr
+#endif /* CONFIG_SPE */
+
+/*
+ * extern void giveup_fpu(struct task_struct *prev)
+ *
+ * The e500 core does not have an FPU.
+ */
+_GLOBAL(giveup_fpu)
+	blr
+
+/*
+ * extern void abort(void)
+ *
+ * At present, this routine just applies a system reset.
+ */
+_GLOBAL(abort)
+	li	r13,0
+        mtspr   SPRN_DBCR0,r13		/* disable all debug events */
+	mfmsr	r13
+	ori	r13,r13,MSR_DE@l	/* Enable Debug Events */
+	mtmsr	r13
+        mfspr   r13,SPRN_DBCR0
+        lis	r13,(DBCR0_IDM|DBCR0_RST_CHIP)@h
+        mtspr   SPRN_DBCR0,r13
+
+_GLOBAL(set_context)
+
+#ifdef CONFIG_BDI_SWITCH
+	/* Context switch the PTE pointer for the Abatron BDI2000.
+	 * The PGDIR is the second parameter.
+	 */
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	stw	r4, 0x4(r5)
+#endif
+	mtspr	SPRN_PID,r3
+	isync			/* Force context change */
+	blr
+
+/*
+ * We put a few things here that have to be page-aligned. This stuff
+ * goes at the beginning of the data segment, which is page-aligned.
+ */
+	.data
+_GLOBAL(sdata)
+_GLOBAL(empty_zero_page)
+	.space	4096
+_GLOBAL(swapper_pg_dir)
+	.space	4096
+
+/* Reserved 4k for the critical exception stack & 4k for the machine
+ * check stack per CPU for kernel mode exceptions */
+	.section .bss
+        .align 12
+exception_stack_bottom:
+	.space	BOOKE_EXCEPTION_STACK_SIZE * NR_CPUS
+_GLOBAL(exception_stack_top)
+
+/*
+ * This space gets a copy of optional info passed to us by the bootstrap
+ * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+_GLOBAL(cmd_line)
+	.space	512
+
+/*
+ * Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+abatron_pteptrs:
+	.space	8
+
diff --git a/arch/ppc/kernel/idle.c b/arch/ppc/kernel/idle.c
new file mode 100644
index 00000000000..53547b6de45
--- /dev/null
+++ b/arch/ppc/kernel/idle.c
@@ -0,0 +1,100 @@
+/*
+ * Idle daemon for PowerPC.  Idle daemon will handle any action
+ * that needs to be taken when the system becomes idle.
+ *
+ * Written by Cort Dougan (cort@cs.nmt.edu).  Subsequently hacked
+ * on by Tom Rini, Armin Kuster, Paul Mackerras and others.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/sysctl.h>
+
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/cputable.h>
+#include <asm/machdep.h>
+
+void default_idle(void)
+{
+	void (*powersave)(void);
+
+	powersave = ppc_md.power_save;
+
+	if (!need_resched()) {
+		if (powersave != NULL)
+			powersave();
+#ifdef CONFIG_SMP
+		else {
+			set_thread_flag(TIF_POLLING_NRFLAG);
+			while (!need_resched())
+				barrier();
+			clear_thread_flag(TIF_POLLING_NRFLAG);
+		}
+#endif
+	}
+	if (need_resched())
+		schedule();
+}
+
+/*
+ * The body of the idle task.
+ */
+void cpu_idle(void)
+{
+	for (;;)
+		if (ppc_md.idle != NULL)
+			ppc_md.idle();
+		else
+			default_idle();
+}
+
+#if defined(CONFIG_SYSCTL) && defined(CONFIG_6xx)
+/*
+ * Register the sysctl to set/clear powersave_nap.
+ */
+extern unsigned long powersave_nap;
+
+static ctl_table powersave_nap_ctl_table[]={
+	{
+		.ctl_name	= KERN_PPC_POWERSAVE_NAP,
+		.procname	= "powersave-nap",
+		.data		= &powersave_nap,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
+	{ 0, },
+};
+static ctl_table powersave_nap_sysctl_root[] = {
+	{ 1, "kernel", NULL, 0, 0755, powersave_nap_ctl_table, },
+ 	{ 0,},
+};
+
+static int __init
+register_powersave_nap_sysctl(void)
+{
+	register_sysctl_table(powersave_nap_sysctl_root, 0);
+
+	return 0;
+}
+
+__initcall(register_powersave_nap_sysctl);
+#endif
diff --git a/arch/ppc/kernel/idle_6xx.S b/arch/ppc/kernel/idle_6xx.S
new file mode 100644
index 00000000000..25d009c75f7
--- /dev/null
+++ b/arch/ppc/kernel/idle_6xx.S
@@ -0,0 +1,233 @@
+/*
+ *  This file contains the power_save function for 6xx & 7xxx CPUs
+ *  rewritten in assembler
+ *
+ *  Warning ! This code assumes that if your machine has a 750fx
+ *  it will have PLL 1 set to low speed mode (used during NAP/DOZE).
+ *  if this is not the case some additional changes will have to
+ *  be done to check a runtime var (a bit like powersave-nap)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/offsets.h>
+
+#undef DEBUG
+
+	.text
+
+/*
+ * Init idle, called at early CPU setup time from head.S for each CPU
+ * Make sure no rest of NAP mode remains in HID0, save default
+ * values for some CPU specific registers. Called with r24
+ * containing CPU number and r3 reloc offset
+ */
+_GLOBAL(init_idle_6xx)
+BEGIN_FTR_SECTION
+	mfspr	r4,SPRN_HID0
+	rlwinm	r4,r4,0,10,8	/* Clear NAP */
+	mtspr	SPRN_HID0, r4
+	b	1f
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+	blr
+1:
+	slwi	r5,r24,2
+	add	r5,r5,r3
+BEGIN_FTR_SECTION
+	mfspr	r4,SPRN_MSSCR0
+	addis	r6,r5, nap_save_msscr0@ha
+	stw	r4,nap_save_msscr0@l(r6)
+END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
+BEGIN_FTR_SECTION
+	mfspr	r4,SPRN_HID1
+	addis	r6,r5,nap_save_hid1@ha
+	stw	r4,nap_save_hid1@l(r6)
+END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
+	blr
+
+/*
+ * Here is the power_save_6xx function. This could eventually be
+ * split into several functions & changing the function pointer
+ * depending on the various features.
+ */
+_GLOBAL(ppc6xx_idle)
+	/* Check if we can nap or doze, put HID0 mask in r3
+	 */
+	lis	r3, 0
+BEGIN_FTR_SECTION
+	lis	r3,HID0_DOZE@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+BEGIN_FTR_SECTION
+	/* We must dynamically check for the NAP feature as it
+	 * can be cleared by CPU init after the fixups are done
+	 */
+	lis	r4,cur_cpu_spec@ha
+	lwz	r4,cur_cpu_spec@l(r4)
+	lwz	r4,CPU_SPEC_FEATURES(r4)
+	andi.	r0,r4,CPU_FTR_CAN_NAP
+	beq	1f
+	/* Now check if user or arch enabled NAP mode */
+	lis	r4,powersave_nap@ha
+	lwz	r4,powersave_nap@l(r4)
+	cmpwi	0,r4,0
+	beq	1f
+	lis	r3,HID0_NAP@h
+1:	
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+	cmpwi	0,r3,0
+	beqlr
+
+	/* Clear MSR:EE */
+	mfmsr	r7
+	rlwinm	r0,r7,0,17,15
+	mtmsr	r0
+
+	/* Check current_thread_info()->flags */
+	rlwinm	r4,r1,0,0,18
+	lwz	r4,TI_FLAGS(r4)
+	andi.	r0,r4,_TIF_NEED_RESCHED
+	beq	1f
+	mtmsr	r7	/* out of line this ? */
+	blr
+1:	
+	/* Some pre-nap cleanups needed on some CPUs */
+	andis.	r0,r3,HID0_NAP@h
+	beq	2f
+BEGIN_FTR_SECTION
+	/* Disable L2 prefetch on some 745x and try to ensure
+	 * L2 prefetch engines are idle. As explained by errata
+	 * text, we can't be sure they are, we just hope very hard
+	 * that well be enough (sic !). At least I noticed Apple
+	 * doesn't even bother doing the dcbf's here...
+	 */
+	mfspr	r4,SPRN_MSSCR0
+	rlwinm	r4,r4,0,0,29
+	sync
+	mtspr	SPRN_MSSCR0,r4
+	sync
+	isync
+	lis	r4,KERNELBASE@h
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
+#ifdef DEBUG
+	lis	r6,nap_enter_count@ha
+	lwz	r4,nap_enter_count@l(r6)
+	addi	r4,r4,1
+	stw	r4,nap_enter_count@l(r6)
+#endif	
+2:
+BEGIN_FTR_SECTION
+	/* Go to low speed mode on some 750FX */
+	lis	r4,powersave_lowspeed@ha
+	lwz	r4,powersave_lowspeed@l(r4)
+	cmpwi	0,r4,0
+	beq	1f
+	mfspr	r4,SPRN_HID1
+	oris	r4,r4,0x0001
+	mtspr	SPRN_HID1,r4
+1:	
+END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
+
+	/* Go to NAP or DOZE now */	
+	mfspr	r4,SPRN_HID0
+	lis	r5,(HID0_NAP|HID0_SLEEP)@h
+BEGIN_FTR_SECTION
+	oris	r5,r5,HID0_DOZE@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+	andc	r4,r4,r5
+	or	r4,r4,r3
+BEGIN_FTR_SECTION
+	oris	r4,r4,HID0_DPM@h	/* that should be done once for all  */
+END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
+	mtspr	SPRN_HID0,r4
+BEGIN_FTR_SECTION
+	DSSALL
+	sync
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+	ori	r7,r7,MSR_EE /* Could be ommited (already set) */
+	oris	r7,r7,MSR_POW@h
+	sync
+	isync
+	mtmsr	r7
+	isync
+	sync
+	blr
+	
+/*
+ * Return from NAP/DOZE mode, restore some CPU specific registers,
+ * we are called with DR/IR still off and r2 containing physical
+ * address of current.
+ */
+_GLOBAL(power_save_6xx_restore)
+	mfspr	r11,SPRN_HID0
+	rlwinm.	r11,r11,0,10,8	/* Clear NAP & copy NAP bit !state to cr1 EQ */
+	cror	4*cr1+eq,4*cr0+eq,4*cr0+eq
+BEGIN_FTR_SECTION
+	rlwinm	r11,r11,0,9,7	/* Clear DOZE */
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+	mtspr	SPRN_HID0, r11
+
+#ifdef DEBUG
+	beq	cr1,1f
+	lis	r11,(nap_return_count-KERNELBASE)@ha
+	lwz	r9,nap_return_count@l(r11)
+	addi	r9,r9,1
+	stw	r9,nap_return_count@l(r11)
+1:
+#endif
+	
+	rlwinm	r9,r1,0,0,18
+	tophys(r9,r9)
+	lwz	r11,TI_CPU(r9)
+	slwi	r11,r11,2
+	/* Todo make sure all these are in the same page
+	 * and load r22 (@ha part + CPU offset) only once
+	 */
+BEGIN_FTR_SECTION
+	beq	cr1,1f
+	addis	r9,r11,(nap_save_msscr0-KERNELBASE)@ha
+	lwz	r9,nap_save_msscr0@l(r9)
+	mtspr	SPRN_MSSCR0, r9
+	sync
+	isync
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
+BEGIN_FTR_SECTION
+	addis	r9,r11,(nap_save_hid1-KERNELBASE)@ha
+	lwz	r9,nap_save_hid1@l(r9)
+	mtspr	SPRN_HID1, r9
+END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
+	b	transfer_to_handler_cont
+
+	.data
+
+_GLOBAL(nap_save_msscr0)
+	.space	4*NR_CPUS
+
+_GLOBAL(nap_save_hid1)
+	.space	4*NR_CPUS
+
+_GLOBAL(powersave_nap)
+	.long	0
+_GLOBAL(powersave_lowspeed)
+	.long	0
+
+#ifdef DEBUG
+_GLOBAL(nap_enter_count)
+	.space	4
+_GLOBAL(nap_return_count)
+	.space	4
+#endif
diff --git a/arch/ppc/kernel/idle_power4.S b/arch/ppc/kernel/idle_power4.S
new file mode 100644
index 00000000000..73a58ff0390
--- /dev/null
+++ b/arch/ppc/kernel/idle_power4.S
@@ -0,0 +1,91 @@
+/*
+ *  This file contains the power_save function for 6xx & 7xxx CPUs
+ *  rewritten in assembler
+ *
+ *  Warning ! This code assumes that if your machine has a 750fx
+ *  it will have PLL 1 set to low speed mode (used during NAP/DOZE).
+ *  if this is not the case some additional changes will have to
+ *  be done to check a runtime var (a bit like powersave-nap)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/offsets.h>
+
+#undef DEBUG
+
+	.text
+
+/*
+ * Init idle, called at early CPU setup time from head.S for each CPU
+ * So nothing for now. Called with r24 containing CPU number and r3
+ * reloc offset
+ */
+ 	.globl	init_idle_power4
+init_idle_power4:
+	blr
+
+/*
+ * Here is the power_save_6xx function. This could eventually be
+ * split into several functions & changing the function pointer
+ * depending on the various features.
+ */
+	.globl	power4_idle
+power4_idle:
+BEGIN_FTR_SECTION
+	blr
+END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
+	/* We must dynamically check for the NAP feature as it
+	 * can be cleared by CPU init after the fixups are done
+	 */
+	lis	r4,cur_cpu_spec@ha
+	lwz	r4,cur_cpu_spec@l(r4)
+	lwz	r4,CPU_SPEC_FEATURES(r4)
+	andi.	r0,r4,CPU_FTR_CAN_NAP
+	beqlr
+	/* Now check if user or arch enabled NAP mode */
+	lis	r4,powersave_nap@ha
+	lwz	r4,powersave_nap@l(r4)
+	cmpwi	0,r4,0
+	beqlr
+
+	/* Clear MSR:EE */
+	mfmsr	r7
+	rlwinm	r0,r7,0,17,15
+	mtmsr	r0
+
+	/* Check current_thread_info()->flags */
+	rlwinm	r4,r1,0,0,18
+	lwz	r4,TI_FLAGS(r4)
+	andi.	r0,r4,_TIF_NEED_RESCHED
+	beq	1f
+	mtmsr	r7	/* out of line this ? */
+	blr
+1:	
+	/* Go to NAP now */	
+BEGIN_FTR_SECTION
+	DSSALL
+	sync
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+	ori	r7,r7,MSR_EE /* Could be ommited (already set) */
+	oris	r7,r7,MSR_POW@h
+	sync
+	isync
+	mtmsr	r7
+	isync
+	sync
+	blr
+	
+	.globl powersave_nap
+powersave_nap:
+	.long	0
diff --git a/arch/ppc/kernel/irq.c b/arch/ppc/kernel/irq.c
new file mode 100644
index 00000000000..8843f3af230
--- /dev/null
+++ b/arch/ppc/kernel/irq.c
@@ -0,0 +1,164 @@
+/*
+ *  arch/ppc/kernel/irq.c
+ *
+ *  Derived from arch/i386/kernel/irq.c
+ *    Copyright (C) 1992 Linus Torvalds
+ *  Adapted from arch/i386 by Gary Thomas
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *  Updated and modified by Cort Dougan <cort@fsmlabs.com>
+ *    Copyright (C) 1996-2001 Cort Dougan
+ *  Adapted for Power Macintosh by Paul Mackerras
+ *    Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * This file contains the code used by various IRQ handling routines:
+ * asking for different IRQ's should be done through these routines
+ * instead of just grabbing them. Thus setups with different IRQ numbers
+ * shouldn't result in any weird surprises, and installing new handlers
+ * should be easier.
+ *
+ * The MPC8xx has an interrupt mask in the SIU.  If a bit is set, the
+ * interrupt is _enabled_.  As expected, IRQ0 is bit 0 in the 32-bit
+ * mask register (of which only 16 are defined), hence the weird shifting
+ * and complement of the cached_irq_mask.  I want to be able to stuff
+ * this right into the SIU SMASK register.
+ * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx
+ * to reduce code space and undefined function references.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/threads.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/proc_fs.h>
+#include <linux/random.h>
+#include <linux/seq_file.h>
+#include <linux/cpumask.h>
+#include <linux/profile.h>
+#include <linux/bitops.h>
+
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/cache.h>
+#include <asm/prom.h>
+#include <asm/ptrace.h>
+
+#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
+
+extern atomic_t ipi_recv;
+extern atomic_t ipi_sent;
+
+#define MAXCOUNT 10000000
+
+int ppc_spurious_interrupts = 0;
+struct irqaction *ppc_irq_action[NR_IRQS];
+unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+atomic_t ppc_n_lost_interrupts;
+
+#ifdef CONFIG_TAU_INT
+extern int tau_initialized;
+extern int tau_interrupts(int);
+#endif
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+	int i = *(loff_t *) v, j;
+	struct irqaction * action;
+	unsigned long flags;
+
+	if (i == 0) {
+		seq_puts(p, "           ");
+		for (j=0; j<NR_CPUS; j++)
+			if (cpu_online(j))
+				seq_printf(p, "CPU%d       ", j);
+		seq_putc(p, '\n');
+	}
+
+	if (i < NR_IRQS) {
+		spin_lock_irqsave(&irq_desc[i].lock, flags);
+		action = irq_desc[i].action;
+		if ( !action || !action->handler )
+			goto skip;
+		seq_printf(p, "%3d: ", i);
+#ifdef CONFIG_SMP
+		for (j = 0; j < NR_CPUS; j++)
+			if (cpu_online(j))
+				seq_printf(p, "%10u ",
+					   kstat_cpu(j).irqs[i]);
+#else
+		seq_printf(p, "%10u ", kstat_irqs(i));
+#endif /* CONFIG_SMP */
+		if (irq_desc[i].handler)
+			seq_printf(p, " %s ", irq_desc[i].handler->typename);
+		else
+			seq_puts(p, "  None      ");
+		seq_printf(p, "%s", (irq_desc[i].status & IRQ_LEVEL) ? "Level " : "Edge  ");
+		seq_printf(p, "    %s", action->name);
+		for (action = action->next; action; action = action->next)
+			seq_printf(p, ", %s", action->name);
+		seq_putc(p, '\n');
+skip:
+		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+	} else if (i == NR_IRQS) {
+#ifdef CONFIG_TAU_INT
+		if (tau_initialized){
+			seq_puts(p, "TAU: ");
+			for (j = 0; j < NR_CPUS; j++)
+				if (cpu_online(j))
+					seq_printf(p, "%10u ", tau_interrupts(j));
+			seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
+		}
+#endif
+#ifdef CONFIG_SMP
+		/* should this be per processor send/receive? */
+		seq_printf(p, "IPI (recv/sent): %10u/%u\n",
+				atomic_read(&ipi_recv), atomic_read(&ipi_sent));
+#endif
+		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
+	}
+	return 0;
+}
+
+void do_IRQ(struct pt_regs *regs)
+{
+	int irq, first = 1;
+        irq_enter();
+
+	/*
+	 * Every platform is required to implement ppc_md.get_irq.
+	 * This function will either return an irq number or -1 to
+	 * indicate there are no more pending.  But the first time
+	 * through the loop this means there wasn't and IRQ pending.
+	 * The value -2 is for buggy hardware and means that this IRQ
+	 * has already been handled. -- Tom
+	 */
+	while ((irq = ppc_md.get_irq(regs)) >= 0) {
+		__do_IRQ(irq, regs);
+		first = 0;
+	}
+	if (irq != -2 && first)
+		/* That's not SMP safe ... but who cares ? */
+		ppc_spurious_interrupts++;
+        irq_exit();
+}
+
+void __init init_IRQ(void)
+{
+	ppc_md.init_IRQ();
+}
diff --git a/arch/ppc/kernel/l2cr.S b/arch/ppc/kernel/l2cr.S
new file mode 100644
index 00000000000..c3944104826
--- /dev/null
+++ b/arch/ppc/kernel/l2cr.S
@@ -0,0 +1,442 @@
+/*
+	L2CR functions
+	Copyright © 1997-1998 by PowerLogix R & D, Inc.
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+/*
+	Thur, Dec. 12, 1998.
+	- First public release, contributed by PowerLogix.
+	***********
+	Sat, Aug. 7, 1999.
+	- Terry: Made sure code disabled interrupts before running. (Previously
+			it was assumed interrupts were already disabled).
+	- Terry: Updated for tentative G4 support.  4MB of memory is now flushed
+			instead of 2MB.  (Prob. only 3 is necessary).
+	- Terry: Updated for workaround to HID0[DPM] processor bug
+			during global invalidates.
+	***********
+	Thu, July 13, 2000.
+	- Terry: Added isync to correct for an errata.
+
+	22 August 2001.
+	- DanM: Finally added the 7450 patch I've had for the past
+		several months.  The L2CR is similar, but I'm going
+		to assume the user of this functions knows what they
+		are doing.
+
+	Author:	Terry Greeniaus (tgree@phys.ualberta.ca)
+	Please e-mail updates to this file to me, thanks!
+*/
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/cache.h>
+#include <asm/page.h>
+
+/* Usage:
+
+	When setting the L2CR register, you must do a few special
+	things.  If you are enabling the cache, you must perform a
+	global invalidate.  If you are disabling the cache, you must
+	flush the cache contents first.  This routine takes care of
+	doing these things.  When first enabling the cache, make sure
+	you pass in the L2CR you want, as well as passing in the
+	global invalidate bit set.  A global invalidate will only be
+	performed if the L2I bit is set in applyThis.  When enabling
+	the cache, you should also set the L2E bit in applyThis.  If
+	you want to modify the L2CR contents after the cache has been
+	enabled, the recommended procedure is to first call
+	__setL2CR(0) to disable the cache and then call it again with
+	the new values for L2CR.  Examples:
+
+	_setL2CR(0)		- disables the cache
+	_setL2CR(0xB3A04000)	- enables my G3 upgrade card:
+				- L2E set to turn on the cache
+				- L2SIZ set to 1MB
+				- L2CLK set to 1:1
+				- L2RAM set to pipelined synchronous late-write
+				- L2I set to perform a global invalidation
+				- L2OH set to 0.5 nS
+				- L2DF set because this upgrade card
+				  requires it
+
+	A similar call should work for your card.  You need to know
+	the correct setting for your card and then place them in the
+	fields I have outlined above.  Other fields support optional
+	features, such as L2DO which caches only data, or L2TS which
+	causes cache pushes from the L1 cache to go to the L2 cache
+	instead of to main memory.
+
+IMPORTANT:
+	Starting with the 7450, the bits in this register have moved
+	or behave differently.  The Enable, Parity Enable, Size,
+	and L2 Invalidate are the only bits that have not moved.
+	The size is read-only for these processors with internal L2
+	cache, and the invalidate is a control as well as status.
+		-- Dan
+
+*/
+/*
+ * Summary: this procedure ignores the L2I bit in the value passed in,
+ * flushes the cache if it was already enabled, always invalidates the
+ * cache, then enables the cache if the L2E bit is set in the value
+ * passed in.
+ *   -- paulus.
+ */
+_GLOBAL(_set_L2CR)
+	/* Make sure this is a 750 or 7400 chip */
+BEGIN_FTR_SECTION
+	li	r3,-1
+	blr
+END_FTR_SECTION_IFCLR(CPU_FTR_L2CR)
+
+	mflr	r9
+
+	/* Stop DST streams */
+BEGIN_FTR_SECTION
+	DSSALL
+	sync
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+
+	/* Turn off interrupts and data relocation. */
+	mfmsr	r7		/* Save MSR in r7 */
+	rlwinm	r4,r7,0,17,15
+	rlwinm	r4,r4,0,28,26	/* Turn off DR bit */
+	sync
+	mtmsr	r4
+	isync
+
+	/* Before we perform the global invalidation, we must disable dynamic
+	 * power management via HID0[DPM] to work around a processor bug where
+	 * DPM can possibly interfere with the state machine in the processor
+	 * that invalidates the L2 cache tags.
+	 */
+	mfspr	r8,SPRN_HID0		/* Save HID0 in r8 */
+	rlwinm	r4,r8,0,12,10		/* Turn off HID0[DPM] */
+	sync
+	mtspr	SPRN_HID0,r4		/* Disable DPM */
+	sync
+
+	/* Get the current enable bit of the L2CR into r4 */
+	mfspr	r4,SPRN_L2CR
+
+	/* Tweak some bits */
+	rlwinm	r5,r3,0,0,0		/* r5 contains the new enable bit */
+	rlwinm	r3,r3,0,11,9		/* Turn off the invalidate bit */
+	rlwinm	r3,r3,0,1,31		/* Turn off the enable bit */
+
+	/* Check to see if we need to flush */
+	rlwinm.	r4,r4,0,0,0
+	beq	2f
+
+	/* Flush the cache. First, read the first 4MB of memory (physical) to
+	 * put new data in the cache.  (Actually we only need
+	 * the size of the L2 cache plus the size of the L1 cache, but 4MB will
+	 * cover everything just to be safe).
+	 */
+
+	 /**** Might be a good idea to set L2DO here - to prevent instructions
+	       from getting into the cache.  But since we invalidate
+	       the next time we enable the cache it doesn't really matter.
+	       Don't do this unless you accomodate all processor variations.
+	       The bit moved on the 7450.....
+	  ****/
+
+	/* TODO: use HW flush assist when available */
+
+	lis	r4,0x0002
+	mtctr	r4
+	li	r4,0
+1:
+	lwzx	r0,r0,r4
+	addi	r4,r4,32		/* Go to start of next cache line */
+	bdnz	1b
+	isync
+
+	/* Now, flush the first 4MB of memory */
+	lis	r4,0x0002
+	mtctr	r4
+	li	r4,0
+	sync
+1:
+	dcbf	0,r4
+	addi	r4,r4,32		/* Go to start of next cache line */
+	bdnz	1b
+
+2:
+	/* Set up the L2CR configuration bits (and switch L2 off) */
+	/* CPU errata: Make sure the mtspr below is already in the
+	 * L1 icache
+	 */
+	b	20f
+	.balign	L1_CACHE_LINE_SIZE
+22:
+	sync
+	mtspr	SPRN_L2CR,r3
+	sync
+	b	23f
+20:
+	b	21f
+21:	sync
+	isync
+	b	22b
+
+23:
+	/* Perform a global invalidation */
+	oris	r3,r3,0x0020
+	sync
+	mtspr	SPRN_L2CR,r3
+	sync
+	isync				/* For errata */
+
+BEGIN_FTR_SECTION
+	/* On the 7450, we wait for the L2I bit to clear......
+	*/
+10:	mfspr	r3,SPRN_L2CR
+	andis.	r4,r3,0x0020
+	bne	10b
+	b	11f
+END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
+
+	/* Wait for the invalidation to complete */
+3:	mfspr	r3,SPRN_L2CR
+	rlwinm.	r4,r3,0,31,31
+	bne	3b
+
+11:	rlwinm	r3,r3,0,11,9		/* Turn off the L2I bit */
+	sync
+	mtspr	SPRN_L2CR,r3
+	sync
+
+	/* See if we need to enable the cache */
+	cmplwi	r5,0
+	beq	4f
+
+	/* Enable the cache */
+	oris	r3,r3,0x8000
+	mtspr	SPRN_L2CR,r3
+	sync
+
+4:
+
+	/* Restore HID0[DPM] to whatever it was before */
+	sync
+	mtspr	1008,r8
+	sync
+
+	/* Restore MSR (restores EE and DR bits to original state) */
+	SYNC
+	mtmsr	r7
+	isync
+
+	mtlr	r9
+	blr
+
+_GLOBAL(_get_L2CR)
+	/* Return the L2CR contents */
+	li	r3,0
+BEGIN_FTR_SECTION
+	mfspr	r3,SPRN_L2CR
+END_FTR_SECTION_IFSET(CPU_FTR_L2CR)
+	blr
+
+
+/*
+ * Here is a similar routine for dealing with the L3 cache
+ * on the 745x family of chips
+ */
+
+_GLOBAL(_set_L3CR)
+	/* Make sure this is a 745x chip */
+BEGIN_FTR_SECTION
+	li	r3,-1
+	blr
+END_FTR_SECTION_IFCLR(CPU_FTR_L3CR)
+
+	/* Turn off interrupts and data relocation. */
+	mfmsr	r7		/* Save MSR in r7 */
+	rlwinm	r4,r7,0,17,15
+	rlwinm	r4,r4,0,28,26	/* Turn off DR bit */
+	sync
+	mtmsr	r4
+	isync
+
+	/* Stop DST streams */
+	DSSALL
+	sync
+
+	/* Get the current enable bit of the L3CR into r4 */
+	mfspr	r4,SPRN_L3CR
+
+	/* Tweak some bits */
+	rlwinm	r5,r3,0,0,0		/* r5 contains the new enable bit */
+	rlwinm	r3,r3,0,22,20		/* Turn off the invalidate bit */
+	rlwinm	r3,r3,0,2,31		/* Turn off the enable & PE bits */
+	rlwinm	r3,r3,0,5,3		/* Turn off the clken bit */
+	/* Check to see if we need to flush */
+	rlwinm.	r4,r4,0,0,0
+	beq	2f
+
+	/* Flush the cache.
+	 */
+
+	/* TODO: use HW flush assist */
+
+	lis	r4,0x0008
+	mtctr	r4
+	li	r4,0
+1:
+	lwzx	r0,r0,r4
+	dcbf	0,r4
+	addi	r4,r4,32		/* Go to start of next cache line */
+	bdnz	1b
+
+2:
+	/* Set up the L3CR configuration bits (and switch L3 off) */
+	sync
+	mtspr	SPRN_L3CR,r3
+	sync
+
+	oris	r3,r3,L3CR_L3RES@h		/* Set reserved bit 5 */
+	mtspr	SPRN_L3CR,r3
+	sync
+	oris	r3,r3,L3CR_L3CLKEN@h		/* Set clken */
+	mtspr	SPRN_L3CR,r3
+	sync
+
+	/* Wait for stabilize */
+	li	r0,256
+	mtctr	r0
+1:	bdnz	1b
+
+	/* Perform a global invalidation */
+	ori	r3,r3,0x0400
+	sync
+	mtspr	SPRN_L3CR,r3
+	sync
+	isync
+
+	/* We wait for the L3I bit to clear...... */
+10:	mfspr	r3,SPRN_L3CR
+	andi.	r4,r3,0x0400
+	bne	10b
+
+	/* Clear CLKEN */
+	rlwinm	r3,r3,0,5,3		/* Turn off the clken bit */
+	mtspr	SPRN_L3CR,r3
+	sync
+
+	/* Wait for stabilize */
+	li	r0,256
+	mtctr	r0
+1:	bdnz	1b
+
+	/* See if we need to enable the cache */
+	cmplwi	r5,0
+	beq	4f
+
+	/* Enable the cache */
+	oris	r3,r3,(L3CR_L3E | L3CR_L3CLKEN)@h
+	mtspr	SPRN_L3CR,r3
+	sync
+
+	/* Wait for stabilize */
+	li	r0,256
+	mtctr	r0
+1:	bdnz	1b
+
+	/* Restore MSR (restores EE and DR bits to original state) */
+4:	SYNC
+	mtmsr	r7
+	isync
+	blr
+
+_GLOBAL(_get_L3CR)
+	/* Return the L3CR contents */
+	li	r3,0
+BEGIN_FTR_SECTION
+	mfspr	r3,SPRN_L3CR
+END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
+	blr
+
+/* --- End of PowerLogix code ---
+ */
+
+
+/* flush_disable_L1()	- Flush and disable L1 cache
+ *
+ * clobbers r0, r3, ctr, cr0
+ * Must be called with interrupts disabled and MMU enabled.
+ */
+_GLOBAL(__flush_disable_L1)
+	/* Stop pending alitvec streams and memory accesses */
+BEGIN_FTR_SECTION
+	DSSALL
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+ 	sync
+
+	/* Load counter to 0x4000 cache lines (512k) and
+	 * load cache with datas
+	 */
+	li	r3,0x4000	/* 512kB / 32B */
+	mtctr	r3
+	lis	r3,KERNELBASE@h
+1:
+	lwz	r0,0(r3)
+	addi	r3,r3,0x0020	/* Go to start of next cache line */
+	bdnz	1b
+	isync
+	sync
+
+	/* Now flush those cache lines */
+	li	r3,0x4000	/* 512kB / 32B */
+	mtctr	r3
+	lis	r3,KERNELBASE@h
+1:
+	dcbf	0,r3
+	addi	r3,r3,0x0020	/* Go to start of next cache line */
+	bdnz	1b
+	sync
+
+	/* We can now disable the L1 cache (HID0:DCE, HID0:ICE) */
+	mfspr	r3,SPRN_HID0
+	rlwinm	r3,r3,0,18,15
+	mtspr	SPRN_HID0,r3
+	sync
+	isync
+ 	blr
+
+/* inval_enable_L1	- Invalidate and enable L1 cache
+ *
+ * Assumes L1 is already disabled and MSR:EE is off
+ *
+ * clobbers r3
+ */
+_GLOBAL(__inval_enable_L1)
+	/* Enable and then Flash inval the instruction & data cache */
+	mfspr	r3,SPRN_HID0
+	ori	r3,r3, HID0_ICE|HID0_ICFI|HID0_DCE|HID0_DCI
+	sync
+	isync
+	mtspr	SPRN_HID0,r3
+	xori	r3,r3, HID0_ICFI|HID0_DCI
+	mtspr	SPRN_HID0,r3
+	sync
+
+ 	blr
+
+
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
new file mode 100644
index 00000000000..73f7c23b0dd
--- /dev/null
+++ b/arch/ppc/kernel/misc.S
@@ -0,0 +1,1453 @@
+/*
+ * This file contains miscellaneous low-level functions.
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/cputable.h>
+#include <asm/mmu.h>
+#include <asm/ppc_asm.h>
+#include <asm/thread_info.h>
+#include <asm/offsets.h>
+
+	.text
+
+	.align	5
+_GLOBAL(__delay)
+	cmpwi	0,r3,0
+	mtctr	r3
+	beqlr
+1:	bdnz	1b
+	blr
+
+/*
+ * Returns (address we're running at) - (address we were linked at)
+ * for use before the text and data are mapped to KERNELBASE.
+ */
+_GLOBAL(reloc_offset)
+	mflr	r0
+	bl	1f
+1:	mflr	r3
+	lis	r4,1b@ha
+	addi	r4,r4,1b@l
+	subf	r3,r4,r3
+	mtlr	r0
+	blr
+
+/*
+ * add_reloc_offset(x) returns x + reloc_offset().
+ */
+_GLOBAL(add_reloc_offset)
+	mflr	r0
+	bl	1f
+1:	mflr	r5
+	lis	r4,1b@ha
+	addi	r4,r4,1b@l
+	subf	r5,r4,r5
+	add	r3,r3,r5
+	mtlr	r0
+	blr
+
+/*
+ * sub_reloc_offset(x) returns x - reloc_offset().
+ */
+_GLOBAL(sub_reloc_offset)
+	mflr	r0
+	bl	1f
+1:	mflr	r5
+	lis	r4,1b@ha
+	addi	r4,r4,1b@l
+	subf	r5,r4,r5
+	subf	r3,r5,r3
+	mtlr	r0
+	blr
+
+/*
+ * reloc_got2 runs through the .got2 section adding an offset
+ * to each entry.
+ */
+_GLOBAL(reloc_got2)
+	mflr	r11
+	lis	r7,__got2_start@ha
+	addi	r7,r7,__got2_start@l
+	lis	r8,__got2_end@ha
+	addi	r8,r8,__got2_end@l
+	subf	r8,r7,r8
+	srwi.	r8,r8,2
+	beqlr
+	mtctr	r8
+	bl	1f
+1:	mflr	r0
+	lis	r4,1b@ha
+	addi	r4,r4,1b@l
+	subf	r0,r4,r0
+	add	r7,r0,r7
+2:	lwz	r0,0(r7)
+	add	r0,r0,r3
+	stw	r0,0(r7)
+	addi	r7,r7,4
+	bdnz	2b
+	mtlr	r11
+	blr
+
+/*
+ * identify_cpu,
+ * called with r3 = data offset and r4 = CPU number
+ * doesn't change r3
+ */
+_GLOBAL(identify_cpu)
+	addis	r8,r3,cpu_specs@ha
+	addi	r8,r8,cpu_specs@l
+	mfpvr	r7
+1:
+	lwz	r5,CPU_SPEC_PVR_MASK(r8)
+	and	r5,r5,r7
+	lwz	r6,CPU_SPEC_PVR_VALUE(r8)
+	cmplw	0,r6,r5
+	beq	1f
+	addi	r8,r8,CPU_SPEC_ENTRY_SIZE
+	b	1b
+1:
+	addis	r6,r3,cur_cpu_spec@ha
+	addi	r6,r6,cur_cpu_spec@l
+	slwi	r4,r4,2
+	sub	r8,r8,r3
+	stwx	r8,r4,r6
+	blr
+
+/*
+ * do_cpu_ftr_fixups - goes through the list of CPU feature fixups
+ * and writes nop's over sections of code that don't apply for this cpu.
+ * r3 = data offset (not changed)
+ */
+_GLOBAL(do_cpu_ftr_fixups)
+	/* Get CPU 0 features */
+	addis	r6,r3,cur_cpu_spec@ha
+	addi	r6,r6,cur_cpu_spec@l
+	lwz	r4,0(r6)
+	add	r4,r4,r3
+	lwz	r4,CPU_SPEC_FEATURES(r4)
+
+	/* Get the fixup table */
+	addis	r6,r3,__start___ftr_fixup@ha
+	addi	r6,r6,__start___ftr_fixup@l
+	addis	r7,r3,__stop___ftr_fixup@ha
+	addi	r7,r7,__stop___ftr_fixup@l
+
+	/* Do the fixup */
+1:	cmplw	0,r6,r7
+	bgelr
+	addi	r6,r6,16
+	lwz	r8,-16(r6)	/* mask */
+	and	r8,r8,r4
+	lwz	r9,-12(r6)	/* value */
+	cmplw	0,r8,r9
+	beq	1b
+	lwz	r8,-8(r6)	/* section begin */
+	lwz	r9,-4(r6)	/* section end */
+	subf.	r9,r8,r9
+	beq	1b
+	/* write nops over the section of code */
+	/* todo: if large section, add a branch at the start of it */
+	srwi	r9,r9,2
+	mtctr	r9
+	add	r8,r8,r3
+	lis	r0,0x60000000@h	/* nop */
+3:	stw	r0,0(r8)
+	andi.	r10,r4,CPU_FTR_SPLIT_ID_CACHE@l
+	beq	2f
+	dcbst	0,r8		/* suboptimal, but simpler */
+	sync
+	icbi	0,r8
+2:	addi	r8,r8,4
+	bdnz	3b
+	sync			/* additional sync needed on g4 */
+	isync
+	b	1b
+
+/*
+ * call_setup_cpu - call the setup_cpu function for this cpu
+ * r3 = data offset, r24 = cpu number
+ *
+ * Setup function is called with:
+ *   r3 = data offset
+ *   r4 = CPU number
+ *   r5 = ptr to CPU spec (relocated)
+ */
+_GLOBAL(call_setup_cpu)
+	addis	r5,r3,cur_cpu_spec@ha
+	addi	r5,r5,cur_cpu_spec@l
+	slwi	r4,r24,2
+	lwzx	r5,r4,r5
+	add	r5,r5,r3
+	lwz	r6,CPU_SPEC_SETUP(r5)
+	add	r6,r6,r3
+	mtctr	r6
+	mr	r4,r24
+	bctr
+
+#if defined(CONFIG_CPU_FREQ_PMAC) && defined(CONFIG_6xx)
+
+/* This gets called by via-pmu.c to switch the PLL selection
+ * on 750fx CPU. This function should really be moved to some
+ * other place (as most of the cpufreq code in via-pmu
+ */
+_GLOBAL(low_choose_750fx_pll)
+	/* Clear MSR:EE */
+	mfmsr	r7
+	rlwinm	r0,r7,0,17,15
+	mtmsr	r0
+
+	/* If switching to PLL1, disable HID0:BTIC */
+	cmplwi	cr0,r3,0
+	beq	1f
+	mfspr	r5,SPRN_HID0
+	rlwinm	r5,r5,0,27,25
+	sync
+	mtspr	SPRN_HID0,r5
+	isync
+	sync
+
+1:
+	/* Calc new HID1 value */
+	mfspr	r4,SPRN_HID1	/* Build a HID1:PS bit from parameter */
+	rlwinm	r5,r3,16,15,15	/* Clear out HID1:PS from value read */
+	rlwinm	r4,r4,0,16,14	/* Could have I used rlwimi here ? */
+	or	r4,r4,r5
+	mtspr	SPRN_HID1,r4
+
+	/* Store new HID1 image */
+	rlwinm	r6,r1,0,0,18
+	lwz	r6,TI_CPU(r6)
+	slwi	r6,r6,2
+	addis	r6,r6,nap_save_hid1@ha
+	stw	r4,nap_save_hid1@l(r6)
+
+	/* If switching to PLL0, enable HID0:BTIC */
+	cmplwi	cr0,r3,0
+	bne	1f
+	mfspr	r5,SPRN_HID0
+	ori	r5,r5,HID0_BTIC
+	sync
+	mtspr	SPRN_HID0,r5
+	isync
+	sync
+
+1:
+	/* Return */
+	mtmsr	r7
+	blr
+
+_GLOBAL(low_choose_7447a_dfs)
+	/* Clear MSR:EE */
+	mfmsr	r7
+	rlwinm	r0,r7,0,17,15
+	mtmsr	r0
+	
+	/* Calc new HID1 value */
+	mfspr	r4,SPRN_HID1
+	insrwi	r4,r3,1,9	/* insert parameter into bit 9 */
+	sync
+	mtspr	SPRN_HID1,r4
+	sync
+	isync
+
+	/* Return */
+	mtmsr	r7
+	blr
+
+#endif /* CONFIG_CPU_FREQ_PMAC && CONFIG_6xx */
+
+/* void local_save_flags_ptr(unsigned long *flags) */
+_GLOBAL(local_save_flags_ptr)
+	mfmsr	r4
+	stw	r4,0(r3)
+	blr
+	/*
+	 * Need these nops here for taking over save/restore to
+	 * handle lost intrs
+	 * -- Cort
+	 */
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+_GLOBAL(local_save_flags_ptr_end)
+
+/* void local_irq_restore(unsigned long flags) */
+_GLOBAL(local_irq_restore)
+/*
+ * Just set/clear the MSR_EE bit through restore/flags but do not
+ * change anything else.  This is needed by the RT system and makes
+ * sense anyway.
+ *    -- Cort
+ */
+	mfmsr 	r4
+	/* Copy all except the MSR_EE bit from r4 (current MSR value)
+	   to r3.  This is the sort of thing the rlwimi instruction is
+	   designed for.  -- paulus. */
+	rlwimi	r3,r4,0,17,15
+	 /* Check if things are setup the way we want _already_. */
+	cmpw	0,r3,r4
+	beqlr
+1:	SYNC
+	mtmsr	r3
+	SYNC
+	blr
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+_GLOBAL(local_irq_restore_end)
+
+_GLOBAL(local_irq_disable)
+	mfmsr	r0		/* Get current interrupt state */
+	rlwinm	r3,r0,16+1,32-1,31	/* Extract old value of 'EE' */
+	rlwinm	r0,r0,0,17,15	/* clear MSR_EE in r0 */
+	SYNC			/* Some chip revs have problems here... */
+	mtmsr	r0		/* Update machine state */
+	blr			/* Done */
+	/*
+	 * Need these nops here for taking over save/restore to
+	 * handle lost intrs
+	 * -- Cort
+	 */
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+_GLOBAL(local_irq_disable_end)
+
+_GLOBAL(local_irq_enable)
+	mfmsr	r3		/* Get current state */
+	ori	r3,r3,MSR_EE	/* Turn on 'EE' bit */
+	SYNC			/* Some chip revs have problems here... */
+	mtmsr	r3		/* Update machine state */
+	blr
+	/*
+	 * Need these nops here for taking over save/restore to
+	 * handle lost intrs
+	 * -- Cort
+	 */
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+_GLOBAL(local_irq_enable_end)
+
+/*
+ * complement mask on the msr then "or" some values on.
+ *     _nmask_and_or_msr(nmask, value_to_or)
+ */
+_GLOBAL(_nmask_and_or_msr)
+	mfmsr	r0		/* Get current msr */
+	andc	r0,r0,r3	/* And off the bits set in r3 (first parm) */
+	or	r0,r0,r4	/* Or on the bits in r4 (second parm) */
+	SYNC			/* Some chip revs have problems here... */
+	mtmsr	r0		/* Update machine state */
+	isync
+	blr			/* Done */
+
+
+/*
+ * Flush MMU TLB
+ */
+_GLOBAL(_tlbia)
+#if defined(CONFIG_40x)
+	sync			/* Flush to memory before changing mapping */
+	tlbia
+	isync			/* Flush shadow TLB */
+#elif defined(CONFIG_44x)
+	li	r3,0
+	sync
+
+	/* Load high watermark */
+	lis	r4,tlb_44x_hwater@ha
+	lwz	r5,tlb_44x_hwater@l(r4)
+
+1:	tlbwe	r3,r3,PPC44x_TLB_PAGEID
+	addi	r3,r3,1
+	cmpw	0,r3,r5
+	ble	1b
+
+	isync
+#elif defined(CONFIG_FSL_BOOKE)
+	/* Invalidate all entries in TLB0 */
+	li	r3, 0x04
+	tlbivax	0,3
+	/* Invalidate all entries in TLB1 */
+	li	r3, 0x0c
+	tlbivax	0,3
+	/* Invalidate all entries in TLB2 */
+	li	r3, 0x14
+	tlbivax	0,3
+	/* Invalidate all entries in TLB3 */
+	li	r3, 0x1c
+	tlbivax	0,3
+	msync
+#ifdef CONFIG_SMP
+	tlbsync
+#endif /* CONFIG_SMP */
+#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */
+#if defined(CONFIG_SMP)
+	rlwinm	r8,r1,0,0,18
+	lwz	r8,TI_CPU(r8)
+	oris	r8,r8,10
+	mfmsr	r10
+	SYNC
+	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
+	rlwinm	r0,r0,0,28,26		/* clear DR */
+	mtmsr	r0
+	SYNC_601
+	isync
+	lis	r9,mmu_hash_lock@h
+	ori	r9,r9,mmu_hash_lock@l
+	tophys(r9,r9)
+10:	lwarx	r7,0,r9
+	cmpwi	0,r7,0
+	bne-	10b
+	stwcx.	r8,0,r9
+	bne-	10b
+	sync
+	tlbia
+	sync
+	TLBSYNC
+	li	r0,0
+	stw	r0,0(r9)		/* clear mmu_hash_lock */
+	mtmsr	r10
+	SYNC_601
+	isync
+#else /* CONFIG_SMP */
+	sync
+	tlbia
+	sync
+#endif /* CONFIG_SMP */
+#endif /* ! defined(CONFIG_40x) */
+	blr
+
+/*
+ * Flush MMU TLB for a particular address
+ */
+_GLOBAL(_tlbie)
+#if defined(CONFIG_40x)
+	tlbsx.	r3, 0, r3
+	bne	10f
+	sync
+	/* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear.
+	 * Since 25 is the V bit in the TLB_TAG, loading this value will invalidate
+	 * the TLB entry. */
+	tlbwe	r3, r3, TLB_TAG
+	isync
+10:
+#elif defined(CONFIG_44x)
+	mfspr	r4,SPRN_MMUCR
+	mfspr	r5,SPRN_PID			/* Get PID */
+	rlwimi	r4,r5,0,24,31			/* Set TID */
+	mtspr	SPRN_MMUCR,r4
+
+	tlbsx.	r3, 0, r3
+	bne	10f
+	sync
+	/* There are only 64 TLB entries, so r3 < 64,
+	 * which means bit 22, is clear.  Since 22 is
+	 * the V bit in the TLB_PAGEID, loading this
+	 * value will invalidate the TLB entry.
+	 */
+	tlbwe	r3, r3, PPC44x_TLB_PAGEID
+	isync
+10:
+#elif defined(CONFIG_FSL_BOOKE)
+	rlwinm	r4, r3, 0, 0, 19
+	ori	r5, r4, 0x08	/* TLBSEL = 1 */
+	ori	r6, r4, 0x10	/* TLBSEL = 2 */
+	ori	r7, r4, 0x18	/* TLBSEL = 3 */
+	tlbivax	0, r4
+	tlbivax	0, r5
+	tlbivax	0, r6
+	tlbivax	0, r7
+	msync
+#if defined(CONFIG_SMP)
+	tlbsync
+#endif /* CONFIG_SMP */
+#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */
+#if defined(CONFIG_SMP)
+	rlwinm	r8,r1,0,0,18
+	lwz	r8,TI_CPU(r8)
+	oris	r8,r8,11
+	mfmsr	r10
+	SYNC
+	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
+	rlwinm	r0,r0,0,28,26		/* clear DR */
+	mtmsr	r0
+	SYNC_601
+	isync
+	lis	r9,mmu_hash_lock@h
+	ori	r9,r9,mmu_hash_lock@l
+	tophys(r9,r9)
+10:	lwarx	r7,0,r9
+	cmpwi	0,r7,0
+	bne-	10b
+	stwcx.	r8,0,r9
+	bne-	10b
+	eieio
+	tlbie	r3
+	sync
+	TLBSYNC
+	li	r0,0
+	stw	r0,0(r9)		/* clear mmu_hash_lock */
+	mtmsr	r10
+	SYNC_601
+	isync
+#else /* CONFIG_SMP */
+	tlbie	r3
+	sync
+#endif /* CONFIG_SMP */
+#endif /* ! CONFIG_40x */
+	blr
+
+/*
+ * Flush instruction cache.
+ * This is a no-op on the 601.
+ */
+_GLOBAL(flush_instruction_cache)
+#if defined(CONFIG_8xx)
+	isync
+	lis	r5, IDC_INVALL@h
+	mtspr	SPRN_IC_CST, r5
+#elif defined(CONFIG_4xx)
+#ifdef CONFIG_403GCX
+	li      r3, 512
+	mtctr   r3
+	lis     r4, KERNELBASE@h
+1:	iccci   0, r4
+	addi    r4, r4, 16
+	bdnz    1b
+#else
+	lis	r3, KERNELBASE@h
+	iccci	0,r3
+#endif
+#elif CONFIG_FSL_BOOKE
+	mfspr	r3,SPRN_L1CSR1
+	ori	r3,r3,L1CSR1_ICFI|L1CSR1_ICLFR
+	mtspr	SPRN_L1CSR1,r3
+#else
+	mfspr	r3,SPRN_PVR
+	rlwinm	r3,r3,16,16,31
+	cmpwi	0,r3,1
+	beqlr			/* for 601, do nothing */
+	/* 603/604 processor - use invalidate-all bit in HID0 */
+	mfspr	r3,SPRN_HID0
+	ori	r3,r3,HID0_ICFI
+	mtspr	SPRN_HID0,r3
+#endif /* CONFIG_8xx/4xx */
+	isync
+	blr
+
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ * This is a no-op on the 601.
+ *
+ * flush_icache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_icache_range)
+BEGIN_FTR_SECTION
+	blr				/* for 601, do nothing */
+END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE)
+	li	r5,L1_CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_L1_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+	mr	r6,r3
+1:	dcbst	0,r3
+	addi	r3,r3,L1_CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	mtctr	r4
+2:	icbi	0,r6
+	addi	r6,r6,L1_CACHE_LINE_SIZE
+	bdnz	2b
+	sync				/* additional sync needed on g4 */
+	isync
+	blr
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ *
+ * clean_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(clean_dcache_range)
+	li	r5,L1_CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_L1_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+
+1:	dcbst	0,r3
+	addi	r3,r3,L1_CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	blr
+
+/*
+ * Write any modified data cache blocks out to memory and invalidate them.
+ * Does not invalidate the corresponding instruction cache blocks.
+ *
+ * flush_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_dcache_range)
+	li	r5,L1_CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_L1_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+
+1:	dcbf	0,r3
+	addi	r3,r3,L1_CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	blr
+
+/*
+ * Like above, but invalidate the D-cache.  This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ *
+ * invalidate_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(invalidate_dcache_range)
+	li	r5,L1_CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_L1_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+
+1:	dcbi	0,r3
+	addi	r3,r3,L1_CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbi's to get to ram */
+	blr
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+/*
+ * 40x cores have 8K or 16K dcache and 32 byte line size.
+ * 44x has a 32K dcache and 32 byte line size.
+ * 8xx has 1, 2, 4, 8K variants.
+ * For now, cover the worst case of the 44x.
+ * Must be called with external interrupts disabled.
+ */
+#define CACHE_NWAYS	64
+#define CACHE_NLINES	16
+
+_GLOBAL(flush_dcache_all)
+	li	r4, (2 * CACHE_NWAYS * CACHE_NLINES)
+	mtctr	r4
+	lis     r5, KERNELBASE@h
+1:	lwz	r3, 0(r5)		/* Load one word from every line */
+	addi	r5, r5, L1_CACHE_LINE_SIZE
+	bdnz    1b
+	blr
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+
+/*
+ * Flush a particular page from the data cache to RAM.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ * This is a no-op on the 601 which has a unified cache.
+ *
+ *	void __flush_dcache_icache(void *page)
+ */
+_GLOBAL(__flush_dcache_icache)
+BEGIN_FTR_SECTION
+	blr					/* for 601, do nothing */
+END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE)
+	rlwinm	r3,r3,0,0,19			/* Get page base address */
+	li	r4,4096/L1_CACHE_LINE_SIZE	/* Number of lines in a page */
+	mtctr	r4
+	mr	r6,r3
+0:	dcbst	0,r3				/* Write line to ram */
+	addi	r3,r3,L1_CACHE_LINE_SIZE
+	bdnz	0b
+	sync
+	mtctr	r4
+1:	icbi	0,r6
+	addi	r6,r6,L1_CACHE_LINE_SIZE
+	bdnz	1b
+	sync
+	isync
+	blr
+
+/*
+ * Flush a particular page from the data cache to RAM, identified
+ * by its physical address.  We turn off the MMU so we can just use
+ * the physical address (this may be a highmem page without a kernel
+ * mapping).
+ *
+ *	void __flush_dcache_icache_phys(unsigned long physaddr)
+ */
+_GLOBAL(__flush_dcache_icache_phys)
+BEGIN_FTR_SECTION
+	blr					/* for 601, do nothing */
+END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE)
+	mfmsr	r10
+	rlwinm	r0,r10,0,28,26			/* clear DR */
+	mtmsr	r0
+	isync
+	rlwinm	r3,r3,0,0,19			/* Get page base address */
+	li	r4,4096/L1_CACHE_LINE_SIZE	/* Number of lines in a page */
+	mtctr	r4
+	mr	r6,r3
+0:	dcbst	0,r3				/* Write line to ram */
+	addi	r3,r3,L1_CACHE_LINE_SIZE
+	bdnz	0b
+	sync
+	mtctr	r4
+1:	icbi	0,r6
+	addi	r6,r6,L1_CACHE_LINE_SIZE
+	bdnz	1b
+	sync
+	mtmsr	r10				/* restore DR */
+	isync
+	blr
+
+/*
+ * Clear pages using the dcbz instruction, which doesn't cause any
+ * memory traffic (except to write out any cache lines which get
+ * displaced).  This only works on cacheable memory.
+ *
+ * void clear_pages(void *page, int order) ;
+ */
+_GLOBAL(clear_pages)
+	li	r0,4096/L1_CACHE_LINE_SIZE
+	slw	r0,r0,r4
+	mtctr	r0
+#ifdef CONFIG_8xx
+	li	r4, 0
+1:	stw	r4, 0(r3)
+	stw	r4, 4(r3)
+	stw	r4, 8(r3)
+	stw	r4, 12(r3)
+#else
+1:	dcbz	0,r3
+#endif
+	addi	r3,r3,L1_CACHE_LINE_SIZE
+	bdnz	1b
+	blr
+
+/*
+ * Copy a whole page.  We use the dcbz instruction on the destination
+ * to reduce memory traffic (it eliminates the unnecessary reads of
+ * the destination into cache).  This requires that the destination
+ * is cacheable.
+ */
+#define COPY_16_BYTES		\
+	lwz	r6,4(r4);	\
+	lwz	r7,8(r4);	\
+	lwz	r8,12(r4);	\
+	lwzu	r9,16(r4);	\
+	stw	r6,4(r3);	\
+	stw	r7,8(r3);	\
+	stw	r8,12(r3);	\
+	stwu	r9,16(r3)
+
+_GLOBAL(copy_page)
+	addi	r3,r3,-4
+	addi	r4,r4,-4
+
+#ifdef CONFIG_8xx
+	/* don't use prefetch on 8xx */
+    	li	r0,4096/L1_CACHE_LINE_SIZE
+	mtctr	r0
+1:	COPY_16_BYTES
+	bdnz	1b
+	blr
+
+#else	/* not 8xx, we can prefetch */
+	li	r5,4
+
+#if MAX_COPY_PREFETCH > 1
+	li	r0,MAX_COPY_PREFETCH
+	li	r11,4
+	mtctr	r0
+11:	dcbt	r11,r4
+	addi	r11,r11,L1_CACHE_LINE_SIZE
+	bdnz	11b
+#else /* MAX_COPY_PREFETCH == 1 */
+	dcbt	r5,r4
+	li	r11,L1_CACHE_LINE_SIZE+4
+#endif /* MAX_COPY_PREFETCH */
+	li	r0,4096/L1_CACHE_LINE_SIZE - MAX_COPY_PREFETCH
+	crclr	4*cr0+eq
+2:
+	mtctr	r0
+1:
+	dcbt	r11,r4
+	dcbz	r5,r3
+	COPY_16_BYTES
+#if L1_CACHE_LINE_SIZE >= 32
+	COPY_16_BYTES
+#if L1_CACHE_LINE_SIZE >= 64
+	COPY_16_BYTES
+	COPY_16_BYTES
+#if L1_CACHE_LINE_SIZE >= 128
+	COPY_16_BYTES
+	COPY_16_BYTES
+	COPY_16_BYTES
+	COPY_16_BYTES
+#endif
+#endif
+#endif
+	bdnz	1b
+	beqlr
+	crnot	4*cr0+eq,4*cr0+eq
+	li	r0,MAX_COPY_PREFETCH
+	li	r11,4
+	b	2b
+#endif	/* CONFIG_8xx */
+
+/*
+ * void atomic_clear_mask(atomic_t mask, atomic_t *addr)
+ * void atomic_set_mask(atomic_t mask, atomic_t *addr);
+ */
+_GLOBAL(atomic_clear_mask)
+10:	lwarx	r5,0,r4
+	andc	r5,r5,r3
+	PPC405_ERR77(0,r4)
+	stwcx.	r5,0,r4
+	bne-	10b
+	blr
+_GLOBAL(atomic_set_mask)
+10:	lwarx	r5,0,r4
+	or	r5,r5,r3
+	PPC405_ERR77(0,r4)
+	stwcx.	r5,0,r4
+	bne-	10b
+	blr
+
+/*
+ * I/O string operations
+ *
+ * insb(port, buf, len)
+ * outsb(port, buf, len)
+ * insw(port, buf, len)
+ * outsw(port, buf, len)
+ * insl(port, buf, len)
+ * outsl(port, buf, len)
+ * insw_ns(port, buf, len)
+ * outsw_ns(port, buf, len)
+ * insl_ns(port, buf, len)
+ * outsl_ns(port, buf, len)
+ *
+ * The *_ns versions don't do byte-swapping.
+ */
+_GLOBAL(_insb)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,1
+	blelr-
+00:	lbz	r5,0(r3)
+	eieio
+	stbu	r5,1(r4)
+	bdnz	00b
+	blr
+
+_GLOBAL(_outsb)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,1
+	blelr-
+00:	lbzu	r5,1(r4)
+	stb	r5,0(r3)
+	eieio
+	bdnz	00b
+	blr
+
+_GLOBAL(_insw)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhbrx	r5,0,r3
+	eieio
+	sthu	r5,2(r4)
+	bdnz	00b
+	blr
+
+_GLOBAL(_outsw)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhzu	r5,2(r4)
+	eieio
+	sthbrx	r5,0,r3
+	bdnz	00b
+	blr
+
+_GLOBAL(_insl)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwbrx	r5,0,r3
+	eieio
+	stwu	r5,4(r4)
+	bdnz	00b
+	blr
+
+_GLOBAL(_outsl)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwzu	r5,4(r4)
+	stwbrx	r5,0,r3
+	eieio
+	bdnz	00b
+	blr
+
+_GLOBAL(__ide_mm_insw)
+_GLOBAL(_insw_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhz	r5,0(r3)
+	eieio
+	sthu	r5,2(r4)
+	bdnz	00b
+	blr
+
+_GLOBAL(__ide_mm_outsw)
+_GLOBAL(_outsw_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhzu	r5,2(r4)
+	sth	r5,0(r3)
+	eieio
+	bdnz	00b
+	blr
+
+_GLOBAL(__ide_mm_insl)
+_GLOBAL(_insl_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwz	r5,0(r3)
+	eieio
+	stwu	r5,4(r4)
+	bdnz	00b
+	blr
+
+_GLOBAL(__ide_mm_outsl)
+_GLOBAL(_outsl_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwzu	r5,4(r4)
+	stw	r5,0(r3)
+	eieio
+	bdnz	00b
+	blr
+
+/*
+ * Extended precision shifts.
+ *
+ * Updated to be valid for shift counts from 0 to 63 inclusive.
+ * -- Gabriel
+ *
+ * R3/R4 has 64 bit value
+ * R5    has shift count
+ * result in R3/R4
+ *
+ *  ashrdi3: arithmetic right shift (sign propagation)	
+ *  lshrdi3: logical right shift
+ *  ashldi3: left shift
+ */
+_GLOBAL(__ashrdi3)
+	subfic	r6,r5,32
+	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
+	addi	r7,r5,32	# could be xori, or addi with -32
+	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
+	rlwinm	r8,r7,0,32	# t3 = (count < 32) ? 32 : 0
+	sraw	r7,r3,r7	# t2 = MSW >> (count-32)
+	or	r4,r4,r6	# LSW |= t1
+	slw	r7,r7,r8	# t2 = (count < 32) ? 0 : t2
+	sraw	r3,r3,r5	# MSW = MSW >> count
+	or	r4,r4,r7	# LSW |= t2
+	blr
+
+_GLOBAL(__ashldi3)
+	subfic	r6,r5,32
+	slw	r3,r3,r5	# MSW = count > 31 ? 0 : MSW << count
+	addi	r7,r5,32	# could be xori, or addi with -32
+	srw	r6,r4,r6	# t1 = count > 31 ? 0 : LSW >> (32-count)
+	slw	r7,r4,r7	# t2 = count < 32 ? 0 : LSW << (count-32)
+	or	r3,r3,r6	# MSW |= t1
+	slw	r4,r4,r5	# LSW = LSW << count
+	or	r3,r3,r7	# MSW |= t2
+	blr
+
+_GLOBAL(__lshrdi3)
+	subfic	r6,r5,32
+	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
+	addi	r7,r5,32	# could be xori, or addi with -32
+	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
+	srw	r7,r3,r7	# t2 = count < 32 ? 0 : MSW >> (count-32)
+	or	r4,r4,r6	# LSW |= t1
+	srw	r3,r3,r5	# MSW = MSW >> count
+	or	r4,r4,r7	# LSW |= t2
+	blr
+
+_GLOBAL(abs)
+	srawi	r4,r3,31
+	xor	r3,r3,r4
+	sub	r3,r3,r4
+	blr
+
+_GLOBAL(_get_SP)
+	mr	r3,r1		/* Close enough */
+	blr
+
+/*
+ * These are used in the alignment trap handler when emulating
+ * single-precision loads and stores.
+ * We restore and save the fpscr so the task gets the same result
+ * and exceptions as if the cpu had performed the load or store.
+ */
+
+#if defined(CONFIG_4xx) || defined(CONFIG_E500)
+_GLOBAL(cvt_fd)
+	lfs	0,0(r3)
+	stfd	0,0(r4)
+	blr
+
+_GLOBAL(cvt_df)
+	lfd	0,0(r3)
+	stfs	0,0(r4)
+	blr
+#else
+_GLOBAL(cvt_fd)
+	lfd	0,-4(r5)	/* load up fpscr value */
+	mtfsf	0xff,0
+	lfs	0,0(r3)
+	stfd	0,0(r4)
+	mffs	0		/* save new fpscr value */
+	stfd	0,-4(r5)
+	blr
+
+_GLOBAL(cvt_df)
+	lfd	0,-4(r5)	/* load up fpscr value */
+	mtfsf	0xff,0
+	lfd	0,0(r3)
+	stfs	0,0(r4)
+	mffs	0		/* save new fpscr value */
+	stfd	0,-4(r5)
+	blr
+#endif
+
+/*
+ * Create a kernel thread
+ *   kernel_thread(fn, arg, flags)
+ */
+_GLOBAL(kernel_thread)
+	stwu	r1,-16(r1)
+	stw	r30,8(r1)
+	stw	r31,12(r1)
+	mr	r30,r3		/* function */
+	mr	r31,r4		/* argument */
+	ori	r3,r5,CLONE_VM	/* flags */
+	oris	r3,r3,CLONE_UNTRACED>>16
+	li	r4,0		/* new sp (unused) */
+	li	r0,__NR_clone
+	sc
+	cmpwi	0,r3,0		/* parent or child? */
+	bne	1f		/* return if parent */
+	li	r0,0		/* make top-level stack frame */
+	stwu	r0,-16(r1)
+	mtlr	r30		/* fn addr in lr */
+	mr	r3,r31		/* load arg and call fn */
+	blrl
+	li	r0,__NR_exit	/* exit if function returns */
+	li	r3,0
+	sc
+1:	lwz	r30,8(r1)
+	lwz	r31,12(r1)
+	addi	r1,r1,16
+	blr
+
+/*
+ * This routine is just here to keep GCC happy - sigh...
+ */
+_GLOBAL(__main)
+	blr
+
+#define SYSCALL(name) \
+_GLOBAL(name) \
+	li	r0,__NR_##name; \
+	sc; \
+	bnslr; \
+	lis	r4,errno@ha; \
+	stw	r3,errno@l(r4); \
+	li	r3,-1; \
+	blr
+
+SYSCALL(execve)
+
+/* Why isn't this a) automatic, b) written in 'C'? */
+	.data
+	.align 4
+_GLOBAL(sys_call_table)
+	.long sys_restart_syscall /* 0 */
+	.long sys_exit
+	.long ppc_fork
+	.long sys_read
+	.long sys_write
+	.long sys_open		/* 5 */
+	.long sys_close
+	.long sys_waitpid
+	.long sys_creat
+	.long sys_link
+	.long sys_unlink	/* 10 */
+	.long sys_execve
+	.long sys_chdir
+	.long sys_time
+	.long sys_mknod
+	.long sys_chmod		/* 15 */
+	.long sys_lchown
+	.long sys_ni_syscall			/* old break syscall holder */
+	.long sys_stat
+	.long sys_lseek
+	.long sys_getpid	/* 20 */
+	.long sys_mount
+	.long sys_oldumount
+	.long sys_setuid
+	.long sys_getuid
+	.long sys_stime		/* 25 */
+	.long sys_ptrace
+	.long sys_alarm
+	.long sys_fstat
+	.long sys_pause
+	.long sys_utime		/* 30 */
+	.long sys_ni_syscall			/* old stty syscall holder */
+	.long sys_ni_syscall			/* old gtty syscall holder */
+	.long sys_access
+	.long sys_nice
+	.long sys_ni_syscall	/* 35 */	/* old ftime syscall holder */
+	.long sys_sync
+	.long sys_kill
+	.long sys_rename
+	.long sys_mkdir
+	.long sys_rmdir		/* 40 */
+	.long sys_dup
+	.long sys_pipe
+	.long sys_times
+	.long sys_ni_syscall			/* old prof syscall holder */
+	.long sys_brk		/* 45 */
+	.long sys_setgid
+	.long sys_getgid
+	.long sys_signal
+	.long sys_geteuid
+	.long sys_getegid	/* 50 */
+	.long sys_acct
+	.long sys_umount			/* recycled never used phys() */
+	.long sys_ni_syscall			/* old lock syscall holder */
+	.long sys_ioctl
+	.long sys_fcntl		/* 55 */
+	.long sys_ni_syscall			/* old mpx syscall holder */
+	.long sys_setpgid
+	.long sys_ni_syscall			/* old ulimit syscall holder */
+	.long sys_olduname
+	.long sys_umask		/* 60 */
+	.long sys_chroot
+	.long sys_ustat
+	.long sys_dup2
+	.long sys_getppid
+	.long sys_getpgrp	/* 65 */
+	.long sys_setsid
+	.long sys_sigaction
+	.long sys_sgetmask
+	.long sys_ssetmask
+	.long sys_setreuid	/* 70 */
+	.long sys_setregid
+	.long ppc_sigsuspend
+	.long sys_sigpending
+	.long sys_sethostname
+	.long sys_setrlimit	/* 75 */
+	.long sys_old_getrlimit
+	.long sys_getrusage
+	.long sys_gettimeofday
+	.long sys_settimeofday
+	.long sys_getgroups	/* 80 */
+	.long sys_setgroups
+	.long ppc_select
+	.long sys_symlink
+	.long sys_lstat
+	.long sys_readlink	/* 85 */
+	.long sys_uselib
+	.long sys_swapon
+	.long sys_reboot
+	.long old_readdir
+	.long sys_mmap		/* 90 */
+	.long sys_munmap
+	.long sys_truncate
+	.long sys_ftruncate
+	.long sys_fchmod
+	.long sys_fchown	/* 95 */
+	.long sys_getpriority
+	.long sys_setpriority
+	.long sys_ni_syscall			/* old profil syscall holder */
+	.long sys_statfs
+	.long sys_fstatfs	/* 100 */
+	.long sys_ni_syscall
+	.long sys_socketcall
+	.long sys_syslog
+	.long sys_setitimer
+	.long sys_getitimer	/* 105 */
+	.long sys_newstat
+	.long sys_newlstat
+	.long sys_newfstat
+	.long sys_uname
+	.long sys_ni_syscall	/* 110 */
+	.long sys_vhangup
+	.long sys_ni_syscall	/* old 'idle' syscall */
+	.long sys_ni_syscall
+	.long sys_wait4
+	.long sys_swapoff	/* 115 */
+	.long sys_sysinfo
+	.long sys_ipc
+	.long sys_fsync
+	.long sys_sigreturn
+	.long ppc_clone		/* 120 */
+	.long sys_setdomainname
+	.long sys_newuname
+	.long sys_ni_syscall
+	.long sys_adjtimex
+	.long sys_mprotect	/* 125 */
+	.long sys_sigprocmask
+	.long sys_ni_syscall	/* old sys_create_module */
+	.long sys_init_module
+	.long sys_delete_module
+	.long sys_ni_syscall	/* old sys_get_kernel_syms */	/* 130 */
+	.long sys_quotactl
+	.long sys_getpgid
+	.long sys_fchdir
+	.long sys_bdflush
+	.long sys_sysfs		/* 135 */
+	.long sys_personality
+	.long sys_ni_syscall	/* for afs_syscall */
+	.long sys_setfsuid
+	.long sys_setfsgid
+	.long sys_llseek	/* 140 */
+	.long sys_getdents
+	.long ppc_select
+	.long sys_flock
+	.long sys_msync
+	.long sys_readv		/* 145 */
+	.long sys_writev
+	.long sys_getsid
+	.long sys_fdatasync
+	.long sys_sysctl
+	.long sys_mlock		/* 150 */
+	.long sys_munlock
+	.long sys_mlockall
+	.long sys_munlockall
+	.long sys_sched_setparam
+	.long sys_sched_getparam	/* 155 */
+	.long sys_sched_setscheduler
+	.long sys_sched_getscheduler
+	.long sys_sched_yield
+	.long sys_sched_get_priority_max
+	.long sys_sched_get_priority_min  /* 160 */
+	.long sys_sched_rr_get_interval
+	.long sys_nanosleep
+	.long sys_mremap
+	.long sys_setresuid
+	.long sys_getresuid	/* 165 */
+	.long sys_ni_syscall		/* old sys_query_module */
+	.long sys_poll
+	.long sys_nfsservctl
+	.long sys_setresgid
+	.long sys_getresgid	/* 170 */
+	.long sys_prctl
+	.long sys_rt_sigreturn
+	.long sys_rt_sigaction
+	.long sys_rt_sigprocmask
+	.long sys_rt_sigpending	/* 175 */
+	.long sys_rt_sigtimedwait
+	.long sys_rt_sigqueueinfo
+	.long ppc_rt_sigsuspend
+	.long sys_pread64
+	.long sys_pwrite64	/* 180 */
+	.long sys_chown
+	.long sys_getcwd
+	.long sys_capget
+	.long sys_capset
+	.long sys_sigaltstack	/* 185 */
+	.long sys_sendfile
+	.long sys_ni_syscall		/* streams1 */
+	.long sys_ni_syscall		/* streams2 */
+	.long ppc_vfork
+	.long sys_getrlimit	/* 190 */
+	.long sys_readahead
+	.long sys_mmap2
+	.long sys_truncate64
+	.long sys_ftruncate64
+	.long sys_stat64	/* 195 */
+	.long sys_lstat64
+	.long sys_fstat64
+	.long sys_pciconfig_read
+	.long sys_pciconfig_write
+	.long sys_pciconfig_iobase 	/* 200 */
+	.long sys_ni_syscall		/* 201 - reserved - MacOnLinux - new */
+	.long sys_getdents64
+	.long sys_pivot_root
+	.long sys_fcntl64
+	.long sys_madvise	/* 205 */
+	.long sys_mincore
+	.long sys_gettid
+	.long sys_tkill
+	.long sys_setxattr
+	.long sys_lsetxattr	/* 210 */
+	.long sys_fsetxattr
+	.long sys_getxattr
+	.long sys_lgetxattr
+	.long sys_fgetxattr
+	.long sys_listxattr	/* 215 */
+	.long sys_llistxattr
+	.long sys_flistxattr
+	.long sys_removexattr
+	.long sys_lremovexattr
+	.long sys_fremovexattr	/* 220 */
+	.long sys_futex
+	.long sys_sched_setaffinity
+	.long sys_sched_getaffinity
+	.long sys_ni_syscall
+	.long sys_ni_syscall	/* 225 - reserved for Tux */
+	.long sys_sendfile64
+	.long sys_io_setup
+	.long sys_io_destroy
+	.long sys_io_getevents
+	.long sys_io_submit	/* 230 */
+	.long sys_io_cancel
+	.long sys_set_tid_address
+	.long sys_fadvise64
+	.long sys_exit_group
+	.long sys_lookup_dcookie /* 235 */
+	.long sys_epoll_create
+	.long sys_epoll_ctl
+	.long sys_epoll_wait
+	.long sys_remap_file_pages
+	.long sys_timer_create	/* 240 */
+	.long sys_timer_settime
+	.long sys_timer_gettime
+	.long sys_timer_getoverrun
+	.long sys_timer_delete
+	.long sys_clock_settime	/* 245 */
+	.long sys_clock_gettime
+	.long sys_clock_getres
+	.long sys_clock_nanosleep
+	.long ppc_swapcontext
+	.long sys_tgkill	/* 250 */
+	.long sys_utimes
+	.long sys_statfs64
+	.long sys_fstatfs64
+	.long ppc_fadvise64_64
+	.long sys_ni_syscall		/* 255 - rtas (used on ppc64) */
+	.long sys_debug_setcontext
+	.long sys_ni_syscall		/* 257 reserved for vserver */
+	.long sys_ni_syscall		/* 258 reserved for new sys_remap_file_pages */
+	.long sys_ni_syscall		/* 259 reserved for new sys_mbind */
+	.long sys_ni_syscall		/* 260 reserved for new sys_get_mempolicy */
+	.long sys_ni_syscall		/* 261 reserved for new sys_set_mempolicy */
+	.long sys_mq_open
+	.long sys_mq_unlink
+	.long sys_mq_timedsend
+	.long sys_mq_timedreceive	/* 265 */
+	.long sys_mq_notify
+	.long sys_mq_getsetattr
+	.long sys_ni_syscall		/* 268 reserved for sys_kexec_load */
+	.long sys_add_key
+	.long sys_request_key		/* 270 */
+	.long sys_keyctl
+	.long sys_waitid
diff --git a/arch/ppc/kernel/module.c b/arch/ppc/kernel/module.c
new file mode 100644
index 00000000000..92f4e5f64f0
--- /dev/null
+++ b/arch/ppc/kernel/module.c
@@ -0,0 +1,320 @@
+/*  Kernel module help for PPC.
+    Copyright (C) 2001 Rusty Russell.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+#include <linux/module.h>
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/cache.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt , ...)
+#endif
+
+LIST_HEAD(module_bug_list);
+
+void *module_alloc(unsigned long size)
+{
+	if (size == 0)
+		return NULL;
+	return vmalloc(size);
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(module_region);
+	/* FIXME: If module_region == mod->init_region, trim exception
+           table entries. */
+}
+
+/* Count how many different relocations (different symbol, different
+   addend) */
+static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num)
+{
+	unsigned int i, j, ret = 0;
+
+	/* Sure, this is order(n^2), but it's usually short, and not
+           time critical */
+	for (i = 0; i < num; i++) {
+		for (j = 0; j < i; j++) {
+			/* If this addend appeared before, it's
+                           already been counted */
+			if (ELF32_R_SYM(rela[i].r_info)
+			    == ELF32_R_SYM(rela[j].r_info)
+			    && rela[i].r_addend == rela[j].r_addend)
+				break;
+		}
+		if (j == i) ret++;
+	}
+	return ret;
+}
+
+/* Get the potential trampolines size required of the init and
+   non-init sections */
+static unsigned long get_plt_size(const Elf32_Ehdr *hdr,
+				  const Elf32_Shdr *sechdrs,
+				  const char *secstrings,
+				  int is_init)
+{
+	unsigned long ret = 0;
+	unsigned i;
+
+	/* Everything marked ALLOC (this includes the exported
+           symbols) */
+	for (i = 1; i < hdr->e_shnum; i++) {
+		/* If it's called *.init*, and we're not init, we're
+                   not interested */
+		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
+		    != is_init)
+			continue;
+
+		/* We don't want to look at debug sections. */
+		if (strstr(secstrings + sechdrs[i].sh_name, ".debug") != 0)
+			continue;
+
+		if (sechdrs[i].sh_type == SHT_RELA) {
+			DEBUGP("Found relocations in section %u\n", i);
+			DEBUGP("Ptr: %p.  Number: %u\n",
+			       (void *)hdr + sechdrs[i].sh_offset,
+			       sechdrs[i].sh_size / sizeof(Elf32_Rela));
+			ret += count_relocs((void *)hdr
+					     + sechdrs[i].sh_offset,
+					     sechdrs[i].sh_size
+					     / sizeof(Elf32_Rela))
+				* sizeof(struct ppc_plt_entry);
+		}
+	}
+
+	return ret;
+}
+
+int module_frob_arch_sections(Elf32_Ehdr *hdr,
+			      Elf32_Shdr *sechdrs,
+			      char *secstrings,
+			      struct module *me)
+{
+	unsigned int i;
+
+	/* Find .plt and .init.plt sections */
+	for (i = 0; i < hdr->e_shnum; i++) {
+		if (strcmp(secstrings + sechdrs[i].sh_name, ".init.plt") == 0)
+			me->arch.init_plt_section = i;
+		else if (strcmp(secstrings + sechdrs[i].sh_name, ".plt") == 0)
+			me->arch.core_plt_section = i;
+	}
+	if (!me->arch.core_plt_section || !me->arch.init_plt_section) {
+		printk("Module doesn't contain .plt or .init.plt sections.\n");
+		return -ENOEXEC;
+	}
+
+	/* Override their sizes */
+	sechdrs[me->arch.core_plt_section].sh_size
+		= get_plt_size(hdr, sechdrs, secstrings, 0);
+	sechdrs[me->arch.init_plt_section].sh_size
+		= get_plt_size(hdr, sechdrs, secstrings, 1);
+	return 0;
+}
+
+int apply_relocate(Elf32_Shdr *sechdrs,
+		   const char *strtab,
+		   unsigned int symindex,
+		   unsigned int relsec,
+		   struct module *module)
+{
+	printk(KERN_ERR "%s: Non-ADD RELOCATION unsupported\n",
+	       module->name);
+	return -ENOEXEC;
+}
+
+static inline int entry_matches(struct ppc_plt_entry *entry, Elf32_Addr val)
+{
+	if (entry->jump[0] == 0x3d600000 + ((val + 0x8000) >> 16)
+	    && entry->jump[1] == 0x396b0000 + (val & 0xffff))
+		return 1;
+	return 0;
+}
+
+/* Set up a trampoline in the PLT to bounce us to the distant function */
+static uint32_t do_plt_call(void *location,
+			    Elf32_Addr val,
+			    Elf32_Shdr *sechdrs,
+			    struct module *mod)
+{
+	struct ppc_plt_entry *entry;
+
+	DEBUGP("Doing plt for call to 0x%x at 0x%x\n", val, (unsigned int)location);
+	/* Init, or core PLT? */
+	if (location >= mod->module_core
+	    && location < mod->module_core + mod->core_size)
+		entry = (void *)sechdrs[mod->arch.core_plt_section].sh_addr;
+	else
+		entry = (void *)sechdrs[mod->arch.init_plt_section].sh_addr;
+
+	/* Find this entry, or if that fails, the next avail. entry */
+	while (entry->jump[0]) {
+		if (entry_matches(entry, val)) return (uint32_t)entry;
+		entry++;
+	}
+
+	/* Stolen from Paul Mackerras as well... */
+	entry->jump[0] = 0x3d600000+((val+0x8000)>>16);	/* lis r11,sym@ha */
+	entry->jump[1] = 0x396b0000 + (val&0xffff);	/* addi r11,r11,sym@l*/
+	entry->jump[2] = 0x7d6903a6;			/* mtctr r11 */
+	entry->jump[3] = 0x4e800420;			/* bctr */
+
+	DEBUGP("Initialized plt for 0x%x at %p\n", val, entry);
+	return (uint32_t)entry;
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+		       const char *strtab,
+		       unsigned int symindex,
+		       unsigned int relsec,
+		       struct module *module)
+{
+	unsigned int i;
+	Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym;
+	uint32_t *location;
+	uint32_t value;
+
+	DEBUGP("Applying ADD relocate section %u to %u\n", relsec,
+	       sechdrs[relsec].sh_info);
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rela[i].r_offset;
+		/* This is the symbol it is referring to.  Note that all
+		   undefined symbols have been resolved.  */
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+			+ ELF32_R_SYM(rela[i].r_info);
+		/* `Everything is relative'. */
+		value = sym->st_value + rela[i].r_addend;
+
+		switch (ELF32_R_TYPE(rela[i].r_info)) {
+		case R_PPC_ADDR32:
+			/* Simply set it */
+			*(uint32_t *)location = value;
+			break;
+
+		case R_PPC_ADDR16_LO:
+			/* Low half of the symbol */
+			*(uint16_t *)location = value;
+			break;
+		
+		case R_PPC_ADDR16_HA:
+			/* Sign-adjusted lower 16 bits: PPC ELF ABI says:
+			   (((x >> 16) + ((x & 0x8000) ? 1 : 0))) & 0xFFFF.
+			   This is the same, only sane.
+			 */
+			*(uint16_t *)location = (value + 0x8000) >> 16;
+			break;
+
+		case R_PPC_REL24:
+			if ((int)(value - (uint32_t)location) < -0x02000000
+			    || (int)(value - (uint32_t)location) >= 0x02000000)
+				value = do_plt_call(location, value,
+						    sechdrs, module);
+
+			/* Only replace bits 2 through 26 */
+			DEBUGP("REL24 value = %08X. location = %08X\n",
+			       value, (uint32_t)location);
+			DEBUGP("Location before: %08X.\n",
+			       *(uint32_t *)location);
+			*(uint32_t *)location
+				= (*(uint32_t *)location & ~0x03fffffc)
+				| ((value - (uint32_t)location)
+				   & 0x03fffffc);
+			DEBUGP("Location after: %08X.\n",
+			       *(uint32_t *)location);
+			DEBUGP("ie. jump to %08X+%08X = %08X\n",
+			       *(uint32_t *)location & 0x03fffffc,
+			       (uint32_t)location,
+			       (*(uint32_t *)location & 0x03fffffc)
+			       + (uint32_t)location);
+			break;
+
+		case R_PPC_REL32:
+			/* 32-bit relative jump. */
+			*(uint32_t *)location = value - (uint32_t)location;
+			break;
+
+		default:
+			printk("%s: unknown ADD relocation: %u\n",
+			       module->name,
+			       ELF32_R_TYPE(rela[i].r_info));
+			return -ENOEXEC;
+		}
+	}
+	return 0;
+}
+
+int module_finalize(const Elf_Ehdr *hdr,
+		    const Elf_Shdr *sechdrs,
+		    struct module *me)
+{
+	char *secstrings;
+	unsigned int i;
+
+	me->arch.bug_table = NULL;
+	me->arch.num_bugs = 0;
+
+	/* Find the __bug_table section, if present */
+	secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+	for (i = 1; i < hdr->e_shnum; i++) {
+		if (strcmp(secstrings+sechdrs[i].sh_name, "__bug_table"))
+			continue;
+		me->arch.bug_table = (void *) sechdrs[i].sh_addr;
+		me->arch.num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry);
+		break;
+	}
+
+	/*
+	 * Strictly speaking this should have a spinlock to protect against
+	 * traversals, but since we only traverse on BUG()s, a spinlock
+	 * could potentially lead to deadlock and thus be counter-productive.
+	 */
+	list_add(&me->arch.bug_list, &module_bug_list);
+
+	return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+	list_del(&mod->arch.bug_list);
+}
+
+struct bug_entry *module_find_bug(unsigned long bugaddr)
+{
+	struct mod_arch_specific *mod;
+	unsigned int i;
+	struct bug_entry *bug;
+
+	list_for_each_entry(mod, &module_bug_list, bug_list) {
+		bug = mod->bug_table;
+		for (i = 0; i < mod->num_bugs; ++i, ++bug)
+			if (bugaddr == bug->bug_addr)
+				return bug;
+	}
+	return NULL;
+}
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
new file mode 100644
index 00000000000..98f94b60204
--- /dev/null
+++ b/arch/ppc/kernel/pci.c
@@ -0,0 +1,1849 @@
+/*
+ * Common pmac/prep/chrp pci routines. -- Cort
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+#include <asm/byteorder.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+unsigned long isa_io_base     = 0;
+unsigned long isa_mem_base    = 0;
+unsigned long pci_dram_offset = 0;
+int pcibios_assign_bus_offset = 1;
+
+void pcibios_make_OF_bus_map(void);
+
+static int pci_relocate_bridge_resource(struct pci_bus *bus, int i);
+static int probe_resource(struct pci_bus *parent, struct resource *pr,
+			  struct resource *res, struct resource **conflict);
+static void update_bridge_base(struct pci_bus *bus, int i);
+static void pcibios_fixup_resources(struct pci_dev* dev);
+static void fixup_broken_pcnet32(struct pci_dev* dev);
+static int reparent_resources(struct resource *parent, struct resource *res);
+static void fixup_rev1_53c810(struct pci_dev* dev);
+static void fixup_cpc710_pci64(struct pci_dev* dev);
+#ifdef CONFIG_PPC_OF
+static u8* pci_to_OF_bus_map;
+#endif
+
+/* By default, we don't re-assign bus numbers. We do this only on
+ * some pmacs
+ */
+int pci_assign_all_busses;
+
+struct pci_controller* hose_head;
+struct pci_controller** hose_tail = &hose_head;
+
+static int pci_bus_count;
+
+static void
+fixup_rev1_53c810(struct pci_dev* dev)
+{
+	/* rev 1 ncr53c810 chips don't set the class at all which means
+	 * they don't get their resources remapped. Fix that here.
+	 */
+
+	if ((dev->class == PCI_CLASS_NOT_DEFINED)) {
+		printk("NCR 53c810 rev 1 detected, setting PCI class.\n");
+		dev->class = PCI_CLASS_STORAGE_SCSI;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR,	PCI_DEVICE_ID_NCR_53C810,	fixup_rev1_53c810);
+
+static void
+fixup_broken_pcnet32(struct pci_dev* dev)
+{
+	if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
+		dev->vendor = PCI_VENDOR_ID_AMD;
+		pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
+		pci_name_device(dev);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT,	PCI_ANY_ID,			fixup_broken_pcnet32);
+
+static void
+fixup_cpc710_pci64(struct pci_dev* dev)
+{
+	/* Hide the PCI64 BARs from the kernel as their content doesn't
+	 * fit well in the resource management
+	 */
+	dev->resource[0].start = dev->resource[0].end = 0;
+	dev->resource[0].flags = 0;
+	dev->resource[1].start = dev->resource[1].end = 0;
+	dev->resource[1].flags = 0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM,	PCI_DEVICE_ID_IBM_CPC710_PCI64,	fixup_cpc710_pci64);
+
+static void
+pcibios_fixup_resources(struct pci_dev *dev)
+{
+	struct pci_controller* hose = (struct pci_controller *)dev->sysdata;
+	int i;
+	unsigned long offset;
+
+	if (!hose) {
+		printk(KERN_ERR "No hose for PCI dev %s!\n", pci_name(dev));
+		return;
+	}
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		struct resource *res = dev->resource + i;
+		if (!res->flags)
+			continue;
+		if (res->end == 0xffffffff) {
+			DBG("PCI:%s Resource %d [%08lx-%08lx] is unassigned\n",
+			    pci_name(dev), i, res->start, res->end);
+			res->end -= res->start;
+			res->start = 0;
+			res->flags |= IORESOURCE_UNSET;
+			continue;
+		}
+		offset = 0;
+		if (res->flags & IORESOURCE_MEM) {
+			offset = hose->pci_mem_offset;
+		} else if (res->flags & IORESOURCE_IO) {
+			offset = (unsigned long) hose->io_base_virt
+				- isa_io_base;
+		}
+		if (offset != 0) {
+			res->start += offset;
+			res->end += offset;
+#ifdef DEBUG
+			printk("Fixup res %d (%lx) of dev %s: %lx -> %lx\n",
+			       i, res->flags, pci_name(dev),
+			       res->start - offset, res->start);
+#endif
+		}
+	}
+
+	/* Call machine specific resource fixup */
+	if (ppc_md.pcibios_fixup_resources)
+		ppc_md.pcibios_fixup_resources(dev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID,		PCI_ANY_ID,			pcibios_fixup_resources);
+
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			struct resource *res)
+{
+	unsigned long offset = 0;
+	struct pci_controller *hose = dev->sysdata;
+
+	if (hose && res->flags & IORESOURCE_IO)
+		offset = (unsigned long)hose->io_base_virt - isa_io_base;
+	else if (hose && res->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+	region->start = res->start - offset;
+	region->end = res->end - offset;
+}
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+void pcibios_align_resource(void *data, struct resource *res, unsigned long size,
+		       unsigned long align)
+{
+	struct pci_dev *dev = data;
+
+	if (res->flags & IORESOURCE_IO) {
+		unsigned long start = res->start;
+
+		if (size > 0x100) {
+			printk(KERN_ERR "PCI: I/O Region %s/%d too large"
+			       " (%ld bytes)\n", pci_name(dev),
+			       dev->resource - res, size);
+		}
+
+		if (start & 0x300) {
+			start = (start + 0x3ff) & ~0x3ff;
+			res->start = start;
+		}
+	}
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ *  Handle resources of PCI devices.  If the world were perfect, we could
+ *  just allocate all the resource regions and do nothing more.  It isn't.
+ *  On the other hand, we cannot just re-allocate all devices, as it would
+ *  require us to know lots of host bridge internals.  So we attempt to
+ *  keep as much of the original configuration as possible, but tweak it
+ *  when it's found to be wrong.
+ *
+ *  Known BIOS problems we have to work around:
+ *	- I/O or memory regions not configured
+ *	- regions configured, but not enabled in the command register
+ *	- bogus I/O addresses above 64K used
+ *	- expansion ROMs left enabled (this may sound harmless, but given
+ *	  the fact the PCI specs explicitly allow address decoders to be
+ *	  shared between expansion ROMs and other resource regions, it's
+ *	  at least dangerous)
+ *
+ *  Our solution:
+ *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ *	    This gives us fixed barriers on where we can allocate.
+ *	(2) Allocate resources for all enabled devices.  If there is
+ *	    a collision, just mark the resource as unallocated. Also
+ *	    disable expansion ROMs during this step.
+ *	(3) Try to allocate resources for disabled devices.  If the
+ *	    resources were assigned correctly, everything goes well,
+ *	    if they weren't, they won't disturb allocation of other
+ *	    resources.
+ *	(4) Assign new addresses to resources which were either
+ *	    not configured at all or misconfigured.  If explicitly
+ *	    requested by the user, configure expansion ROM address
+ *	    as well.
+ */
+
+static void __init
+pcibios_allocate_bus_resources(struct list_head *bus_list)
+{
+	struct pci_bus *bus;
+	int i;
+	struct resource *res, *pr;
+
+	/* Depth-First Search on bus tree */
+	list_for_each_entry(bus, bus_list, node) {
+		for (i = 0; i < 4; ++i) {
+			if ((res = bus->resource[i]) == NULL || !res->flags
+			    || res->start > res->end)
+				continue;
+			if (bus->parent == NULL)
+				pr = (res->flags & IORESOURCE_IO)?
+					&ioport_resource: &iomem_resource;
+			else {
+				pr = pci_find_parent_resource(bus->self, res);
+				if (pr == res) {
+					/* this happens when the generic PCI
+					 * code (wrongly) decides that this
+					 * bridge is transparent  -- paulus
+					 */
+					continue;
+				}
+			}
+
+			DBG("PCI: bridge rsrc %lx..%lx (%lx), parent %p\n",
+			    res->start, res->end, res->flags, pr);
+			if (pr) {
+				if (request_resource(pr, res) == 0)
+					continue;
+				/*
+				 * Must be a conflict with an existing entry.
+				 * Move that entry (or entries) under the
+				 * bridge resource and try again.
+				 */
+				if (reparent_resources(pr, res) == 0)
+					continue;
+			}
+			printk(KERN_ERR "PCI: Cannot allocate resource region "
+			       "%d of PCI bridge %d\n", i, bus->number);
+			if (pci_relocate_bridge_resource(bus, i))
+				bus->resource[i] = NULL;
+		}
+		pcibios_allocate_bus_resources(&bus->children);
+	}
+}
+
+/*
+ * Reparent resource children of pr that conflict with res
+ * under res, and make res replace those children.
+ */
+static int __init
+reparent_resources(struct resource *parent, struct resource *res)
+{
+	struct resource *p, **pp;
+	struct resource **firstpp = NULL;
+
+	for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
+		if (p->end < res->start)
+			continue;
+		if (res->end < p->start)
+			break;
+		if (p->start < res->start || p->end > res->end)
+			return -1;	/* not completely contained */
+		if (firstpp == NULL)
+			firstpp = pp;
+	}
+	if (firstpp == NULL)
+		return -1;	/* didn't find any conflicting entries? */
+	res->parent = parent;
+	res->child = *firstpp;
+	res->sibling = *pp;
+	*firstpp = res;
+	*pp = NULL;
+	for (p = res->child; p != NULL; p = p->sibling) {
+		p->parent = res;
+		DBG(KERN_INFO "PCI: reparented %s [%lx..%lx] under %s\n",
+		    p->name, p->start, p->end, res->name);
+	}
+	return 0;
+}
+
+/*
+ * A bridge has been allocated a range which is outside the range
+ * of its parent bridge, so it needs to be moved.
+ */
+static int __init
+pci_relocate_bridge_resource(struct pci_bus *bus, int i)
+{
+	struct resource *res, *pr, *conflict;
+	unsigned long try, size;
+	int j;
+	struct pci_bus *parent = bus->parent;
+
+	if (parent == NULL) {
+		/* shouldn't ever happen */
+		printk(KERN_ERR "PCI: can't move host bridge resource\n");
+		return -1;
+	}
+	res = bus->resource[i];
+	if (res == NULL)
+		return -1;
+	pr = NULL;
+	for (j = 0; j < 4; j++) {
+		struct resource *r = parent->resource[j];
+		if (!r)
+			continue;
+		if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM))
+			continue;
+		if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH)) {
+			pr = r;
+			break;
+		}
+		if (res->flags & IORESOURCE_PREFETCH)
+			pr = r;
+	}
+	if (pr == NULL)
+		return -1;
+	size = res->end - res->start;
+	if (pr->start > pr->end || size > pr->end - pr->start)
+		return -1;
+	try = pr->end;
+	for (;;) {
+		res->start = try - size;
+		res->end = try;
+		if (probe_resource(bus->parent, pr, res, &conflict) == 0)
+			break;
+		if (conflict->start <= pr->start + size)
+			return -1;
+		try = conflict->start - 1;
+	}
+	if (request_resource(pr, res)) {
+		DBG(KERN_ERR "PCI: huh? couldn't move to %lx..%lx\n",
+		    res->start, res->end);
+		return -1;		/* "can't happen" */
+	}
+	update_bridge_base(bus, i);
+	printk(KERN_INFO "PCI: bridge %d resource %d moved to %lx..%lx\n",
+	       bus->number, i, res->start, res->end);
+	return 0;
+}
+
+static int __init
+probe_resource(struct pci_bus *parent, struct resource *pr,
+	       struct resource *res, struct resource **conflict)
+{
+	struct pci_bus *bus;
+	struct pci_dev *dev;
+	struct resource *r;
+	int i;
+
+	for (r = pr->child; r != NULL; r = r->sibling) {
+		if (r->end >= res->start && res->end >= r->start) {
+			*conflict = r;
+			return 1;
+		}
+	}
+	list_for_each_entry(bus, &parent->children, node) {
+		for (i = 0; i < 4; ++i) {
+			if ((r = bus->resource[i]) == NULL)
+				continue;
+			if (!r->flags || r->start > r->end || r == res)
+				continue;
+			if (pci_find_parent_resource(bus->self, r) != pr)
+				continue;
+			if (r->end >= res->start && res->end >= r->start) {
+				*conflict = r;
+				return 1;
+			}
+		}
+	}
+	list_for_each_entry(dev, &parent->devices, bus_list) {
+		for (i = 0; i < 6; ++i) {
+			r = &dev->resource[i];
+			if (!r->flags || (r->flags & IORESOURCE_UNSET))
+				continue;
+			if (pci_find_parent_resource(dev, r) != pr)
+				continue;
+			if (r->end >= res->start && res->end >= r->start) {
+				*conflict = r;
+				return 1;
+			}
+		}
+	}
+	return 0;
+}
+
+static void __init
+update_bridge_base(struct pci_bus *bus, int i)
+{
+	struct resource *res = bus->resource[i];
+	u8 io_base_lo, io_limit_lo;
+	u16 mem_base, mem_limit;
+	u16 cmd;
+	unsigned long start, end, off;
+	struct pci_dev *dev = bus->self;
+	struct pci_controller *hose = dev->sysdata;
+
+	if (!hose) {
+		printk("update_bridge_base: no hose?\n");
+		return;
+	}
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	pci_write_config_word(dev, PCI_COMMAND,
+			      cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY));
+	if (res->flags & IORESOURCE_IO) {
+		off = (unsigned long) hose->io_base_virt - isa_io_base;
+		start = res->start - off;
+		end = res->end - off;
+		io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK;
+		io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK;
+		if (end > 0xffff) {
+			pci_write_config_word(dev, PCI_IO_BASE_UPPER16,
+					      start >> 16);
+			pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16,
+					      end >> 16);
+			io_base_lo |= PCI_IO_RANGE_TYPE_32;
+		} else
+			io_base_lo |= PCI_IO_RANGE_TYPE_16;
+		pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo);
+		pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo);
+
+	} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
+		   == IORESOURCE_MEM) {
+		off = hose->pci_mem_offset;
+		mem_base = ((res->start - off) >> 16) & PCI_MEMORY_RANGE_MASK;
+		mem_limit = ((res->end - off) >> 16) & PCI_MEMORY_RANGE_MASK;
+		pci_write_config_word(dev, PCI_MEMORY_BASE, mem_base);
+		pci_write_config_word(dev, PCI_MEMORY_LIMIT, mem_limit);
+
+	} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
+		   == (IORESOURCE_MEM | IORESOURCE_PREFETCH)) {
+		off = hose->pci_mem_offset;
+		mem_base = ((res->start - off) >> 16) & PCI_PREF_RANGE_MASK;
+		mem_limit = ((res->end - off) >> 16) & PCI_PREF_RANGE_MASK;
+		pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, mem_base);
+		pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit);
+
+	} else {
+		DBG(KERN_ERR "PCI: ugh, bridge %s res %d has flags=%lx\n",
+		    pci_name(dev), i, res->flags);
+	}
+	pci_write_config_word(dev, PCI_COMMAND, cmd);
+}
+
+static inline void alloc_resource(struct pci_dev *dev, int idx)
+{
+	struct resource *pr, *r = &dev->resource[idx];
+
+	DBG("PCI:%s: Resource %d: %08lx-%08lx (f=%lx)\n",
+	    pci_name(dev), idx, r->start, r->end, r->flags);
+	pr = pci_find_parent_resource(dev, r);
+	if (!pr || request_resource(pr, r) < 0) {
+		printk(KERN_ERR "PCI: Cannot allocate resource region %d"
+		       " of device %s\n", idx, pci_name(dev));
+		if (pr)
+			DBG("PCI:  parent is %p: %08lx-%08lx (f=%lx)\n",
+			    pr, pr->start, pr->end, pr->flags);
+		/* We'll assign a new address later */
+		r->flags |= IORESOURCE_UNSET;
+		r->end -= r->start;
+		r->start = 0;
+	}
+}
+
+static void __init
+pcibios_allocate_resources(int pass)
+{
+	struct pci_dev *dev = NULL;
+	int idx, disabled;
+	u16 command;
+	struct resource *r;
+
+	while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		for (idx = 0; idx < 6; idx++) {
+			r = &dev->resource[idx];
+			if (r->parent)		/* Already allocated */
+				continue;
+			if (!r->flags || (r->flags & IORESOURCE_UNSET))
+				continue;	/* Not assigned at all */
+			if (r->flags & IORESOURCE_IO)
+				disabled = !(command & PCI_COMMAND_IO);
+			else
+				disabled = !(command & PCI_COMMAND_MEMORY);
+			if (pass == disabled)
+				alloc_resource(dev, idx);
+		}
+		if (pass)
+			continue;
+		r = &dev->resource[PCI_ROM_RESOURCE];
+		if (r->flags & IORESOURCE_ROM_ENABLE) {
+			/* Turn the ROM off, leave the resource region, but keep it unregistered. */
+			u32 reg;
+			DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
+			r->flags &= ~IORESOURCE_ROM_ENABLE;
+			pci_read_config_dword(dev, dev->rom_base_reg, &reg);
+			pci_write_config_dword(dev, dev->rom_base_reg,
+					       reg & ~PCI_ROM_ADDRESS_ENABLE);
+		}
+	}
+}
+
+static void __init
+pcibios_assign_resources(void)
+{
+	struct pci_dev *dev = NULL;
+	int idx;
+	struct resource *r;
+
+	while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		int class = dev->class >> 8;
+
+		/* Don't touch classless devices and host bridges */
+		if (!class || class == PCI_CLASS_BRIDGE_HOST)
+			continue;
+
+		for (idx = 0; idx < 6; idx++) {
+			r = &dev->resource[idx];
+
+			/*
+			 * We shall assign a new address to this resource,
+			 * either because the BIOS (sic) forgot to do so
+			 * or because we have decided the old address was
+			 * unusable for some reason.
+			 */
+			if ((r->flags & IORESOURCE_UNSET) && r->end &&
+			    (!ppc_md.pcibios_enable_device_hook ||
+			     !ppc_md.pcibios_enable_device_hook(dev, 1))) {
+				r->flags &= ~IORESOURCE_UNSET;
+				pci_assign_resource(dev, idx);
+			}
+		}
+
+#if 0 /* don't assign ROMs */
+		r = &dev->resource[PCI_ROM_RESOURCE];
+		r->end -= r->start;
+		r->start = 0;
+		if (r->end)
+			pci_assign_resource(dev, PCI_ROM_RESOURCE);
+#endif
+	}
+}
+
+
+int
+pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+	u16 cmd, old_cmd;
+	int idx;
+	struct resource *r;
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
+	for (idx=0; idx<6; idx++) {
+		/* Only set up the requested stuff */
+		if (!(mask & (1<<idx)))
+			continue;
+	
+		r = &dev->resource[idx];
+		if (r->flags & IORESOURCE_UNSET) {
+			printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
+			return -EINVAL;
+		}
+		if (r->flags & IORESOURCE_IO)
+			cmd |= PCI_COMMAND_IO;
+		if (r->flags & IORESOURCE_MEM)
+			cmd |= PCI_COMMAND_MEMORY;
+	}
+	if (dev->resource[PCI_ROM_RESOURCE].start)
+		cmd |= PCI_COMMAND_MEMORY;
+	if (cmd != old_cmd) {
+		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
+	return 0;
+}
+
+static int next_controller_index;
+
+struct pci_controller * __init
+pcibios_alloc_controller(void)
+{
+	struct pci_controller *hose;
+
+	hose = (struct pci_controller *)alloc_bootmem(sizeof(*hose));
+	memset(hose, 0, sizeof(struct pci_controller));
+
+	*hose_tail = hose;
+	hose_tail = &hose->next;
+
+	hose->index = next_controller_index++;
+
+	return hose;
+}
+
+#ifdef CONFIG_PPC_OF
+/*
+ * Functions below are used on OpenFirmware machines.
+ */
+static void __openfirmware
+make_one_node_map(struct device_node* node, u8 pci_bus)
+{
+	int *bus_range;
+	int len;
+
+	if (pci_bus >= pci_bus_count)
+		return;
+	bus_range = (int *) get_property(node, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get bus-range for %s, "
+		       "assuming it starts at 0\n", node->full_name);
+		pci_to_OF_bus_map[pci_bus] = 0;
+	} else
+		pci_to_OF_bus_map[pci_bus] = bus_range[0];
+
+	for (node=node->child; node != 0;node = node->sibling) {
+		struct pci_dev* dev;
+		unsigned int *class_code, *reg;
+	
+		class_code = (unsigned int *) get_property(node, "class-code", NULL);
+		if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
+			continue;
+		reg = (unsigned int *)get_property(node, "reg", NULL);
+		if (!reg)
+			continue;
+		dev = pci_find_slot(pci_bus, ((reg[0] >> 8) & 0xff));
+		if (!dev || !dev->subordinate)
+			continue;
+		make_one_node_map(node, dev->subordinate->number);
+	}
+}
+	
+void __openfirmware
+pcibios_make_OF_bus_map(void)
+{
+	int i;
+	struct pci_controller* hose;
+	u8* of_prop_map;
+
+	pci_to_OF_bus_map = (u8*)kmalloc(pci_bus_count, GFP_KERNEL);
+	if (!pci_to_OF_bus_map) {
+		printk(KERN_ERR "Can't allocate OF bus map !\n");
+		return;
+	}
+
+	/* We fill the bus map with invalid values, that helps
+	 * debugging.
+	 */
+	for (i=0; i<pci_bus_count; i++)
+		pci_to_OF_bus_map[i] = 0xff;
+
+	/* For each hose, we begin searching bridges */
+	for(hose=hose_head; hose; hose=hose->next) {
+		struct device_node* node;	
+		node = (struct device_node *)hose->arch_data;
+		if (!node)
+			continue;
+		make_one_node_map(node, hose->first_busno);
+	}
+	of_prop_map = get_property(find_path_device("/"), "pci-OF-bus-map", NULL);
+	if (of_prop_map)
+		memcpy(of_prop_map, pci_to_OF_bus_map, pci_bus_count);
+#ifdef DEBUG
+	printk("PCI->OF bus map:\n");
+	for (i=0; i<pci_bus_count; i++) {
+		if (pci_to_OF_bus_map[i] == 0xff)
+			continue;
+		printk("%d -> %d\n", i, pci_to_OF_bus_map[i]);
+	}
+#endif
+}
+
+typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data);
+
+static struct device_node* __openfirmware
+scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* data)
+{
+	struct device_node* sub_node;
+
+	for (; node != 0;node = node->sibling) {
+		unsigned int *class_code;
+	
+		if (filter(node, data))
+			return node;
+
+		/* For PCI<->PCI bridges or CardBus bridges, we go down
+		 * Note: some OFs create a parent node "multifunc-device" as
+		 * a fake root for all functions of a multi-function device,
+		 * we go down them as well.
+		 */
+		class_code = (unsigned int *) get_property(node, "class-code", NULL);
+		if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
+			strcmp(node->name, "multifunc-device"))
+			continue;
+		sub_node = scan_OF_pci_childs(node->child, filter, data);
+		if (sub_node)
+			return sub_node;
+	}
+	return NULL;
+}
+
+static int
+scan_OF_pci_childs_iterator(struct device_node* node, void* data)
+{
+	unsigned int *reg;
+	u8* fdata = (u8*)data;
+	
+	reg = (unsigned int *) get_property(node, "reg", NULL);
+	if (reg && ((reg[0] >> 8) & 0xff) == fdata[1]
+		&& ((reg[0] >> 16) & 0xff) == fdata[0])
+		return 1;
+	return 0;
+}
+
+static struct device_node* __openfirmware
+scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn)
+{
+	u8 filter_data[2] = {bus, dev_fn};
+
+	return scan_OF_pci_childs(node, scan_OF_pci_childs_iterator, filter_data);
+}
+
+/*
+ * Scans the OF tree for a device node matching a PCI device
+ */
+struct device_node *
+pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
+{
+	struct pci_controller *hose;
+	struct device_node *node;
+	int busnr;
+
+	if (!have_of)
+		return NULL;
+	
+	/* Lookup the hose */
+	busnr = bus->number;
+	hose = pci_bus_to_hose(busnr);
+	if (!hose)
+		return NULL;
+
+	/* Check it has an OF node associated */
+	node = (struct device_node *) hose->arch_data;
+	if (!node)
+		return NULL;
+
+	/* Fixup bus number according to what OF think it is. */
+#ifdef CONFIG_PPC_PMAC
+	/* The G5 need a special case here. Basically, we don't remap all
+	 * busses on it so we don't create the pci-OF-map. However, we do
+	 * remap the AGP bus and so have to deal with it. A future better
+	 * fix has to be done by making the remapping per-host and always
+	 * filling the pci_to_OF map. --BenH
+	 */
+	if (_machine == _MACH_Pmac && busnr >= 0xf0)
+		busnr -= 0xf0;
+	else
+#endif
+	if (pci_to_OF_bus_map)
+		busnr = pci_to_OF_bus_map[busnr];
+	if (busnr == 0xff)
+		return NULL;
+	
+	/* Now, lookup childs of the hose */
+	return scan_OF_childs_for_device(node->child, busnr, devfn);
+}
+
+struct device_node*
+pci_device_to_OF_node(struct pci_dev *dev)
+{
+	return pci_busdev_to_OF_node(dev->bus, dev->devfn);
+}
+
+/* This routine is meant to be used early during boot, when the
+ * PCI bus numbers have not yet been assigned, and you need to
+ * issue PCI config cycles to an OF device.
+ * It could also be used to "fix" RTAS config cycles if you want
+ * to set pci_assign_all_busses to 1 and still use RTAS for PCI
+ * config cycles.
+ */
+struct pci_controller*
+pci_find_hose_for_OF_device(struct device_node* node)
+{
+	if (!have_of)
+		return NULL;
+	while(node) {
+		struct pci_controller* hose;
+		for (hose=hose_head;hose;hose=hose->next)
+			if (hose->arch_data == node)
+				return hose;
+		node=node->parent;
+	}
+	return NULL;
+}
+
+static int __openfirmware
+find_OF_pci_device_filter(struct device_node* node, void* data)
+{
+	return ((void *)node == data);
+}
+
+/*
+ * Returns the PCI device matching a given OF node
+ */
+int
+pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn)
+{
+	unsigned int *reg;
+	struct pci_controller* hose;
+	struct pci_dev* dev = NULL;
+	
+	if (!have_of)
+		return -ENODEV;
+	/* Make sure it's really a PCI device */
+	hose = pci_find_hose_for_OF_device(node);
+	if (!hose || !hose->arch_data)
+		return -ENODEV;
+	if (!scan_OF_pci_childs(((struct device_node*)hose->arch_data)->child,
+			find_OF_pci_device_filter, (void *)node))
+		return -ENODEV;
+	reg = (unsigned int *) get_property(node, "reg", NULL);
+	if (!reg)
+		return -ENODEV;
+	*bus = (reg[0] >> 16) & 0xff;
+	*devfn = ((reg[0] >> 8) & 0xff);
+
+	/* Ok, here we need some tweak. If we have already renumbered
+	 * all busses, we can't rely on the OF bus number any more.
+	 * the pci_to_OF_bus_map is not enough as several PCI busses
+	 * may match the same OF bus number.
+	 */
+	if (!pci_to_OF_bus_map)
+		return 0;
+	while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		if (pci_to_OF_bus_map[dev->bus->number] != *bus)
+			continue;
+		if (dev->devfn != *devfn)
+			continue;
+		*bus = dev->bus->number;
+		return 0;
+	}
+	return -ENODEV;
+}
+
+void __init
+pci_process_bridge_OF_ranges(struct pci_controller *hose,
+			   struct device_node *dev, int primary)
+{
+	static unsigned int static_lc_ranges[256] __initdata;
+	unsigned int *dt_ranges, *lc_ranges, *ranges, *prev;
+	unsigned int size;
+	int rlen = 0, orig_rlen;
+	int memno = 0;
+	struct resource *res;
+	int np, na = prom_n_addr_cells(dev);
+	np = na + 5;
+
+	/* First we try to merge ranges to fix a problem with some pmacs
+	 * that can have more than 3 ranges, fortunately using contiguous
+	 * addresses -- BenH
+	 */
+	dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen);
+	if (!dt_ranges)
+		return;
+	/* Sanity check, though hopefully that never happens */
+	if (rlen > sizeof(static_lc_ranges)) {
+		printk(KERN_WARNING "OF ranges property too large !\n");
+		rlen = sizeof(static_lc_ranges);
+	}
+	lc_ranges = static_lc_ranges;
+	memcpy(lc_ranges, dt_ranges, rlen);
+	orig_rlen = rlen;
+
+	/* Let's work on a copy of the "ranges" property instead of damaging
+	 * the device-tree image in memory
+	 */
+	ranges = lc_ranges;
+	prev = NULL;
+	while ((rlen -= np * sizeof(unsigned int)) >= 0) {
+		if (prev) {
+			if (prev[0] == ranges[0] && prev[1] == ranges[1] &&
+				(prev[2] + prev[na+4]) == ranges[2] &&
+				(prev[na+2] + prev[na+4]) == ranges[na+2]) {
+				prev[na+4] += ranges[na+4];
+				ranges[0] = 0;
+				ranges += np;
+				continue;
+			}
+		}
+		prev = ranges;
+		ranges += np;
+	}
+
+	/*
+	 * The ranges property is laid out as an array of elements,
+	 * each of which comprises:
+	 *   cells 0 - 2:	a PCI address
+	 *   cells 3 or 3+4:	a CPU physical address
+	 *			(size depending on dev->n_addr_cells)
+	 *   cells 4+5 or 5+6:	the size of the range
+	 */
+	ranges = lc_ranges;
+	rlen = orig_rlen;
+	while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) {
+		res = NULL;
+		size = ranges[na+4];
+		switch (ranges[0] >> 24) {
+		case 1:		/* I/O space */
+			if (ranges[2] != 0)
+				break;
+			hose->io_base_phys = ranges[na+2];
+			/* limit I/O space to 16MB */
+			if (size > 0x01000000)
+				size = 0x01000000;
+			hose->io_base_virt = ioremap(ranges[na+2], size);
+			if (primary)
+				isa_io_base = (unsigned long) hose->io_base_virt;
+			res = &hose->io_resource;
+			res->flags = IORESOURCE_IO;
+			res->start = ranges[2];
+			break;
+		case 2:		/* memory space */
+			memno = 0;
+			if (ranges[1] == 0 && ranges[2] == 0
+			    && ranges[na+4] <= (16 << 20)) {
+				/* 1st 16MB, i.e. ISA memory area */
+				if (primary)
+					isa_mem_base = ranges[na+2];
+				memno = 1;
+			}
+			while (memno < 3 && hose->mem_resources[memno].flags)
+				++memno;
+			if (memno == 0)
+				hose->pci_mem_offset = ranges[na+2] - ranges[2];
+			if (memno < 3) {
+				res = &hose->mem_resources[memno];
+				res->flags = IORESOURCE_MEM;
+				res->start = ranges[na+2];
+			}
+			break;
+		}
+		if (res != NULL) {
+			res->name = dev->full_name;
+			res->end = res->start + size - 1;
+			res->parent = NULL;
+			res->sibling = NULL;
+			res->child = NULL;
+		}
+		ranges += np;
+	}
+}
+
+/* We create the "pci-OF-bus-map" property now so it appears in the
+ * /proc device tree
+ */
+void __init
+pci_create_OF_bus_map(void)
+{
+	struct property* of_prop;
+	
+	of_prop = (struct property*) alloc_bootmem(sizeof(struct property) + 256);
+	if (of_prop && find_path_device("/")) {
+		memset(of_prop, -1, sizeof(struct property) + 256);
+		of_prop->name = "pci-OF-bus-map";
+		of_prop->length = 256;
+		of_prop->value = (unsigned char *)&of_prop[1];
+		prom_add_property(find_path_device("/"), of_prop);
+	}
+}
+
+static ssize_t pci_show_devspec(struct device *dev, char *buf)
+{
+	struct pci_dev *pdev;
+	struct device_node *np;
+
+	pdev = to_pci_dev (dev);
+	np = pci_device_to_OF_node(pdev);
+	if (np == NULL || np->full_name == NULL)
+		return 0;
+	return sprintf(buf, "%s", np->full_name);
+}
+static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
+
+#endif /* CONFIG_PPC_OF */
+
+/* Add sysfs properties */
+void pcibios_add_platform_entries(struct pci_dev *pdev)
+{
+#ifdef CONFIG_PPC_OF
+	device_create_file(&pdev->dev, &dev_attr_devspec);
+#endif /* CONFIG_PPC_OF */
+}
+
+
+#ifdef CONFIG_PPC_PMAC
+/*
+ * This set of routines checks for PCI<->PCI bridges that have closed
+ * IO resources and have child devices. It tries to re-open an IO
+ * window on them.
+ *
+ * This is a _temporary_ fix to workaround a problem with Apple's OF
+ * closing IO windows on P2P bridges when the OF drivers of cards
+ * below this bridge don't claim any IO range (typically ATI or
+ * Adaptec).
+ *
+ * A more complete fix would be to use drivers/pci/setup-bus.c, which
+ * involves a working pcibios_fixup_pbus_ranges(), some more care about
+ * ordering when creating the host bus resources, and maybe a few more
+ * minor tweaks
+ */
+
+/* Initialize bridges with base/limit values we have collected */
+static void __init
+do_update_p2p_io_resource(struct pci_bus *bus, int enable_vga)
+{
+	struct pci_dev *bridge = bus->self;
+	struct pci_controller* hose = (struct pci_controller *)bridge->sysdata;
+	u32 l;
+	u16 w;
+	struct resource res;
+
+	if (bus->resource[0] == NULL)
+		return;
+ 	res = *(bus->resource[0]);
+
+	DBG("Remapping Bus %d, bridge: %s\n", bus->number, pci_name(bridge));
+	res.start -= ((unsigned long) hose->io_base_virt - isa_io_base);
+	res.end -= ((unsigned long) hose->io_base_virt - isa_io_base);
+	DBG("  IO window: %08lx-%08lx\n", res.start, res.end);
+
+	/* Set up the top and bottom of the PCI I/O segment for this bus. */
+	pci_read_config_dword(bridge, PCI_IO_BASE, &l);
+	l &= 0xffff000f;
+	l |= (res.start >> 8) & 0x00f0;
+	l |= res.end & 0xf000;
+	pci_write_config_dword(bridge, PCI_IO_BASE, l);
+
+	if ((l & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
+		l = (res.start >> 16) | (res.end & 0xffff0000);
+		pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, l);
+	}
+
+	pci_read_config_word(bridge, PCI_COMMAND, &w);
+	w |= PCI_COMMAND_IO;
+	pci_write_config_word(bridge, PCI_COMMAND, w);
+
+#if 0 /* Enabling this causes XFree 4.2.0 to hang during PCI probe */
+	if (enable_vga) {
+		pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &w);
+		w |= PCI_BRIDGE_CTL_VGA;
+		pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, w);
+	}
+#endif
+}
+
+/* This function is pretty basic and actually quite broken for the
+ * general case, it's enough for us right now though. It's supposed
+ * to tell us if we need to open an IO range at all or not and what
+ * size.
+ */
+static int __init
+check_for_io_childs(struct pci_bus *bus, struct resource* res, int *found_vga)
+{
+	struct pci_dev *dev;
+	int	i;
+	int	rc = 0;
+
+#define push_end(res, size) do { unsigned long __sz = (size) ; \
+	res->end = ((res->end + __sz) / (__sz + 1)) * (__sz + 1) + __sz; \
+    } while (0)
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		u16 class = dev->class >> 8;
+
+		if (class == PCI_CLASS_DISPLAY_VGA ||
+		    class == PCI_CLASS_NOT_DEFINED_VGA)
+			*found_vga = 1;
+		if (class >> 8 == PCI_BASE_CLASS_BRIDGE && dev->subordinate)
+			rc |= check_for_io_childs(dev->subordinate, res, found_vga);
+		if (class == PCI_CLASS_BRIDGE_CARDBUS)
+			push_end(res, 0xfff);
+
+		for (i=0; i<PCI_NUM_RESOURCES; i++) {
+			struct resource *r;
+			unsigned long r_size;
+
+			if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI
+			    && i >= PCI_BRIDGE_RESOURCES)
+				continue;
+			r = &dev->resource[i];
+			r_size = r->end - r->start;
+			if (r_size < 0xfff)
+				r_size = 0xfff;
+			if (r->flags & IORESOURCE_IO && (r_size) != 0) {
+				rc = 1;
+				push_end(res, r_size);
+			}
+		}
+	}
+
+	return rc;
+}
+
+/* Here we scan all P2P bridges of a given level that have a closed
+ * IO window. Note that the test for the presence of a VGA card should
+ * be improved to take into account already configured P2P bridges,
+ * currently, we don't see them and might end up configuring 2 bridges
+ * with VGA pass through enabled
+ */
+static void __init
+do_fixup_p2p_level(struct pci_bus *bus)
+{
+	struct pci_bus *b;
+	int i, parent_io;
+	int has_vga = 0;
+
+	for (parent_io=0; parent_io<4; parent_io++)
+		if (bus->resource[parent_io]
+		    && bus->resource[parent_io]->flags & IORESOURCE_IO)
+			break;
+	if (parent_io >= 4)
+		return;
+
+	list_for_each_entry(b, &bus->children, node) {
+		struct pci_dev *d = b->self;
+		struct pci_controller* hose = (struct pci_controller *)d->sysdata;
+		struct resource *res = b->resource[0];
+		struct resource tmp_res;
+		unsigned long max;
+		int found_vga = 0;
+
+		memset(&tmp_res, 0, sizeof(tmp_res));
+		tmp_res.start = bus->resource[parent_io]->start;
+
+		/* We don't let low addresses go through that closed P2P bridge, well,
+		 * that may not be necessary but I feel safer that way
+		 */
+		if (tmp_res.start == 0)
+			tmp_res.start = 0x1000;
+	
+		if (!list_empty(&b->devices) && res && res->flags == 0 &&
+		    res != bus->resource[parent_io] &&
+		    (d->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
+		    check_for_io_childs(b, &tmp_res, &found_vga)) {
+			u8 io_base_lo;
+
+			printk(KERN_INFO "Fixing up IO bus %s\n", b->name);
+
+			if (found_vga) {
+				if (has_vga) {
+					printk(KERN_WARNING "Skipping VGA, already active"
+					    " on bus segment\n");
+					found_vga = 0;
+				} else
+					has_vga = 1;
+			}
+			pci_read_config_byte(d, PCI_IO_BASE, &io_base_lo);
+
+			if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32)
+				max = ((unsigned long) hose->io_base_virt
+					- isa_io_base) + 0xffffffff;
+			else
+				max = ((unsigned long) hose->io_base_virt
+					- isa_io_base) + 0xffff;
+
+			*res = tmp_res;
+			res->flags = IORESOURCE_IO;
+			res->name = b->name;
+		
+			/* Find a resource in the parent where we can allocate */
+			for (i = 0 ; i < 4; i++) {
+				struct resource *r = bus->resource[i];
+				if (!r)
+					continue;
+				if ((r->flags & IORESOURCE_IO) == 0)
+					continue;
+				DBG("Trying to allocate from %08lx, size %08lx from parent"
+				    " res %d: %08lx -> %08lx\n",
+					res->start, res->end, i, r->start, r->end);
+			
+				if (allocate_resource(r, res, res->end + 1, res->start, max,
+				    res->end + 1, NULL, NULL) < 0) {
+					DBG("Failed !\n");
+					continue;
+				}
+				do_update_p2p_io_resource(b, found_vga);
+				break;
+			}
+		}
+		do_fixup_p2p_level(b);
+	}
+}
+
+static void
+pcibios_fixup_p2p_bridges(void)
+{
+	struct pci_bus *b;
+
+	list_for_each_entry(b, &pci_root_buses, node)
+		do_fixup_p2p_level(b);
+}
+
+#endif /* CONFIG_PPC_PMAC */
+
+static int __init
+pcibios_init(void)
+{
+	struct pci_controller *hose;
+	struct pci_bus *bus;
+	int next_busno;
+
+	printk(KERN_INFO "PCI: Probing PCI hardware\n");
+
+	/* Scan all of the recorded PCI controllers.  */
+	for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
+		if (pci_assign_all_busses)
+			hose->first_busno = next_busno;
+		hose->last_busno = 0xff;
+		bus = pci_scan_bus(hose->first_busno, hose->ops, hose);
+		hose->last_busno = bus->subordinate;
+		if (pci_assign_all_busses || next_busno <= hose->last_busno)
+			next_busno = hose->last_busno + pcibios_assign_bus_offset;
+	}
+	pci_bus_count = next_busno;
+
+	/* OpenFirmware based machines need a map of OF bus
+	 * numbers vs. kernel bus numbers since we may have to
+	 * remap them.
+	 */
+	if (pci_assign_all_busses && have_of)
+		pcibios_make_OF_bus_map();
+
+	/* Do machine dependent PCI interrupt routing */
+	if (ppc_md.pci_swizzle && ppc_md.pci_map_irq)
+		pci_fixup_irqs(ppc_md.pci_swizzle, ppc_md.pci_map_irq);
+
+	/* Call machine dependent fixup */
+	if (ppc_md.pcibios_fixup)
+		ppc_md.pcibios_fixup();
+
+	/* Allocate and assign resources */
+	pcibios_allocate_bus_resources(&pci_root_buses);
+	pcibios_allocate_resources(0);
+	pcibios_allocate_resources(1);
+#ifdef CONFIG_PPC_PMAC
+	pcibios_fixup_p2p_bridges();
+#endif /* CONFIG_PPC_PMAC */
+	pcibios_assign_resources();
+
+	/* Call machine dependent post-init code */
+	if (ppc_md.pcibios_after_init)
+		ppc_md.pcibios_after_init();
+
+	return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+unsigned char __init
+common_swizzle(struct pci_dev *dev, unsigned char *pinp)
+{
+	struct pci_controller *hose = dev->sysdata;
+
+	if (dev->bus->number != hose->first_busno) {
+		u8 pin = *pinp;
+		do {
+			pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
+			/* Move up the chain of bridges. */
+			dev = dev->bus->self;
+		} while (dev->bus->self);
+		*pinp = pin;
+
+		/* The slot is the idsel of the last bridge. */
+	}
+	return PCI_SLOT(dev->devfn);
+}
+
+unsigned long resource_fixup(struct pci_dev * dev, struct resource * res,
+			     unsigned long start, unsigned long size)
+{
+	return start;
+}
+
+void __init pcibios_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+	unsigned long io_offset;
+	struct resource *res;
+	int i;
+
+	io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
+	if (bus->parent == NULL) {
+		/* This is a host bridge - fill in its resources */
+		hose->bus = bus;
+
+		bus->resource[0] = res = &hose->io_resource;
+		if (!res->flags) {
+			if (io_offset)
+				printk(KERN_ERR "I/O resource not set for host"
+				       " bridge %d\n", hose->index);
+			res->start = 0;
+			res->end = IO_SPACE_LIMIT;
+			res->flags = IORESOURCE_IO;
+		}
+		res->start += io_offset;
+		res->end += io_offset;
+
+		for (i = 0; i < 3; ++i) {
+			res = &hose->mem_resources[i];
+			if (!res->flags) {
+				if (i > 0)
+					continue;
+				printk(KERN_ERR "Memory resource not set for "
+				       "host bridge %d\n", hose->index);
+				res->start = hose->pci_mem_offset;
+				res->end = ~0U;
+				res->flags = IORESOURCE_MEM;
+			}
+			bus->resource[i+1] = res;
+		}
+	} else {
+		/* This is a subordinate bridge */
+		pci_read_bridge_bases(bus);
+
+		for (i = 0; i < 4; ++i) {
+			if ((res = bus->resource[i]) == NULL)
+				continue;
+			if (!res->flags)
+				continue;
+			if (io_offset && (res->flags & IORESOURCE_IO)) {
+				res->start += io_offset;
+				res->end += io_offset;
+			} else if (hose->pci_mem_offset
+				   && (res->flags & IORESOURCE_MEM)) {
+				res->start += hose->pci_mem_offset;
+				res->end += hose->pci_mem_offset;
+			}
+		}
+	}
+
+	if (ppc_md.pcibios_fixup_bus)
+		ppc_md.pcibios_fixup_bus(bus);
+}
+
+char __init *pcibios_setup(char *str)
+{
+	return str;
+}
+
+/* the next one is stolen from the alpha port... */
+void __init
+pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+	/* XXX FIXME - update OF device tree node interrupt property */
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	u16 cmd, old_cmd;
+	int idx;
+	struct resource *r;
+
+	if (ppc_md.pcibios_enable_device_hook)
+		if (ppc_md.pcibios_enable_device_hook(dev, 0))
+			return -EINVAL;
+		
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
+	for (idx=0; idx<6; idx++) {
+		r = &dev->resource[idx];
+		if (r->flags & IORESOURCE_UNSET) {
+			printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
+			return -EINVAL;
+		}
+		if (r->flags & IORESOURCE_IO)
+			cmd |= PCI_COMMAND_IO;
+		if (r->flags & IORESOURCE_MEM)
+			cmd |= PCI_COMMAND_MEMORY;
+	}
+	if (cmd != old_cmd) {
+		printk("PCI: Enabling device %s (%04x -> %04x)\n",
+		       pci_name(dev), old_cmd, cmd);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
+	return 0;
+}
+
+struct pci_controller*
+pci_bus_to_hose(int bus)
+{
+	struct pci_controller* hose = hose_head;
+
+	for (; hose; hose = hose->next)
+		if (bus >= hose->first_busno && bus <= hose->last_busno)
+			return hose;
+	return NULL;
+}
+
+void*
+pci_bus_io_base(unsigned int bus)
+{
+	struct pci_controller *hose;
+
+	hose = pci_bus_to_hose(bus);
+	if (!hose)
+		return NULL;
+	return hose->io_base_virt;
+}
+
+unsigned long
+pci_bus_io_base_phys(unsigned int bus)
+{
+	struct pci_controller *hose;
+
+	hose = pci_bus_to_hose(bus);
+	if (!hose)
+		return 0;
+	return hose->io_base_phys;
+}
+
+unsigned long
+pci_bus_mem_base_phys(unsigned int bus)
+{
+	struct pci_controller *hose;
+
+	hose = pci_bus_to_hose(bus);
+	if (!hose)
+		return 0;
+	return hose->pci_mem_offset;
+}
+
+unsigned long
+pci_resource_to_bus(struct pci_dev *pdev, struct resource *res)
+{
+	/* Hack alert again ! See comments in chrp_pci.c
+	 */
+	struct pci_controller* hose =
+		(struct pci_controller *)pdev->sysdata;
+	if (hose && res->flags & IORESOURCE_MEM)
+		return res->start - hose->pci_mem_offset;
+	/* We may want to do something with IOs here... */
+	return res->start;
+}
+
+
+static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
+					       unsigned long *offset,
+					       enum pci_mmap_state mmap_state)
+{
+	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+	unsigned long io_offset = 0;
+	int i, res_bit;
+
+	if (hose == 0)
+		return NULL;		/* should never happen */
+
+	/* If memory, add on the PCI bridge address offset */
+	if (mmap_state == pci_mmap_mem) {
+		*offset += hose->pci_mem_offset;
+		res_bit = IORESOURCE_MEM;
+	} else {
+		io_offset = (unsigned long)hose->io_base_virt;
+		*offset += io_offset;
+		res_bit = IORESOURCE_IO;
+	}
+
+	/*
+	 * Check that the offset requested corresponds to one of the
+	 * resources of the device.
+	 */
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+		struct resource *rp = &dev->resource[i];
+		int flags = rp->flags;
+
+		/* treat ROM as memory (should be already) */
+		if (i == PCI_ROM_RESOURCE)
+			flags |= IORESOURCE_MEM;
+
+		/* Active and same type? */
+		if ((flags & res_bit) == 0)
+			continue;
+
+		/* In the range of this resource? */
+		if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end)
+			continue;
+
+		/* found it! construct the final physical address */
+		if (mmap_state == pci_mmap_io)
+			*offset += hose->io_base_phys - _IO_BASE;
+		return rp;
+	}
+
+	return NULL;
+}
+
+/*
+ * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
+ * device mapping.
+ */
+static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
+				      pgprot_t protection,
+				      enum pci_mmap_state mmap_state,
+				      int write_combine)
+{
+	unsigned long prot = pgprot_val(protection);
+
+	/* Write combine is always 0 on non-memory space mappings. On
+	 * memory space, if the user didn't pass 1, we check for a
+	 * "prefetchable" resource. This is a bit hackish, but we use
+	 * this to workaround the inability of /sysfs to provide a write
+	 * combine bit
+	 */
+	if (mmap_state != pci_mmap_mem)
+		write_combine = 0;
+	else if (write_combine == 0) {
+		if (rp->flags & IORESOURCE_PREFETCH)
+			write_combine = 1;
+	}
+
+	/* XXX would be nice to have a way to ask for write-through */
+	prot |= _PAGE_NO_CACHE;
+	if (write_combine)
+		prot &= ~_PAGE_GUARDED;
+	else
+		prot |= _PAGE_GUARDED;
+
+	printk("PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start,
+	       prot);
+
+	return __pgprot(prot);
+}
+
+/*
+ * This one is used by /dev/mem and fbdev who have no clue about the
+ * PCI device, it tries to find the PCI device first and calls the
+ * above routine
+ */
+pgprot_t pci_phys_mem_access_prot(struct file *file,
+				  unsigned long offset,
+				  unsigned long size,
+				  pgprot_t protection)
+{
+	struct pci_dev *pdev = NULL;
+	struct resource *found = NULL;
+	unsigned long prot = pgprot_val(protection);
+	int i;
+
+	if (page_is_ram(offset >> PAGE_SHIFT))
+		return prot;
+
+	prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
+
+	for_each_pci_dev(pdev) {
+		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+			struct resource *rp = &pdev->resource[i];
+			int flags = rp->flags;
+
+			/* Active and same type? */
+			if ((flags & IORESOURCE_MEM) == 0)
+				continue;
+			/* In the range of this resource? */
+			if (offset < (rp->start & PAGE_MASK) ||
+			    offset > rp->end)
+				continue;
+			found = rp;
+			break;
+		}
+		if (found)
+			break;
+	}
+	if (found) {
+		if (found->flags & IORESOURCE_PREFETCH)
+			prot &= ~_PAGE_GUARDED;
+		pci_dev_put(pdev);
+	}
+
+	DBG("non-PCI map for %lx, prot: %lx\n", offset, prot);
+
+	return __pgprot(prot);
+}
+
+
+/*
+ * Perform the actual remap of the pages for a PCI device mapping, as
+ * appropriate for this architecture.  The region in the process to map
+ * is described by vm_start and vm_end members of VMA, the base physical
+ * address is found in vm_pgoff.
+ * The pci device structure is provided so that architectures may make mapping
+ * decisions on a per-device or per-bus basis.
+ *
+ * Returns a negative error code on failure, zero on success.
+ */
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state,
+			int write_combine)
+{
+	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	struct resource *rp;
+	int ret;
+
+	rp = __pci_mmap_make_offset(dev, &offset, mmap_state);
+	if (rp == NULL)
+		return -EINVAL;
+
+	vma->vm_pgoff = offset >> PAGE_SHIFT;
+	vma->vm_flags |= VM_SHM | VM_LOCKED | VM_IO;
+	vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
+						  vma->vm_page_prot,
+						  mmap_state, write_combine);
+
+	ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			       vma->vm_end - vma->vm_start, vma->vm_page_prot);
+
+	return ret;
+}
+
+/* Obsolete functions. Should be removed once the symbios driver
+ * is fixed
+ */
+unsigned long
+phys_to_bus(unsigned long pa)
+{
+	struct pci_controller *hose;
+	int i;
+
+	for (hose = hose_head; hose; hose = hose->next) {
+		for (i = 0; i < 3; ++i) {
+			if (pa >= hose->mem_resources[i].start
+			    && pa <= hose->mem_resources[i].end) {
+				/*
+				 * XXX the hose->pci_mem_offset really
+				 * only applies to mem_resources[0].
+				 * We need a way to store an offset for
+				 * the others.  -- paulus
+				 */
+				if (i == 0)
+					pa -= hose->pci_mem_offset;
+				return pa;
+			}
+		}
+	}
+	/* hmmm, didn't find it */
+	return 0;
+}
+
+unsigned long
+pci_phys_to_bus(unsigned long pa, int busnr)
+{
+	struct pci_controller* hose = pci_bus_to_hose(busnr);
+	if (!hose)
+		return pa;
+	return pa - hose->pci_mem_offset;
+}
+
+unsigned long
+pci_bus_to_phys(unsigned int ba, int busnr)
+{
+	struct pci_controller* hose = pci_bus_to_hose(busnr);
+	if (!hose)
+		return ba;
+	return ba + hose->pci_mem_offset;
+}
+
+/* Provide information on locations of various I/O regions in physical
+ * memory.  Do this on a per-card basis so that we choose the right
+ * root bridge.
+ * Note that the returned IO or memory base is a physical address
+ */
+
+long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
+{
+	struct pci_controller* hose;
+	long result = -EOPNOTSUPP;
+
+	/* Argh ! Please forgive me for that hack, but that's the
+	 * simplest way to get existing XFree to not lockup on some
+	 * G5 machines... So when something asks for bus 0 io base
+	 * (bus 0 is HT root), we return the AGP one instead.
+	 */
+#ifdef CONFIG_PPC_PMAC
+	if (_machine == _MACH_Pmac && machine_is_compatible("MacRISC4"))
+		if (bus == 0)
+			bus = 0xf0;
+#endif /* CONFIG_PPC_PMAC */
+
+	hose = pci_bus_to_hose(bus);
+	if (!hose)
+		return -ENODEV;
+
+	switch (which) {
+	case IOBASE_BRIDGE_NUMBER:
+		return (long)hose->first_busno;
+	case IOBASE_MEMORY:
+		return (long)hose->pci_mem_offset;
+	case IOBASE_IO:
+		return (long)hose->io_base_phys;
+	case IOBASE_ISA_IO:
+		return (long)isa_io_base;
+	case IOBASE_ISA_MEM:
+		return (long)isa_mem_base;
+	}
+
+	return result;
+}
+
+void __init
+pci_init_resource(struct resource *res, unsigned long start, unsigned long end,
+		  int flags, char *name)
+{
+	res->start = start;
+	res->end = end;
+	res->flags = flags;
+	res->name = name;
+	res->parent = NULL;
+	res->sibling = NULL;
+	res->child = NULL;
+}
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
+{
+	unsigned long start = pci_resource_start(dev, bar);
+	unsigned long len = pci_resource_len(dev, bar);
+	unsigned long flags = pci_resource_flags(dev, bar);
+
+	if (!len)
+		return NULL;
+	if (max && len > max)
+		len = max;
+	if (flags & IORESOURCE_IO)
+		return ioport_map(start, len);
+	if (flags & IORESOURCE_MEM)
+		/* Not checking IORESOURCE_CACHEABLE because PPC does
+		 * not currently distinguish between ioremap and
+		 * ioremap_nocache.
+		 */
+		return ioremap(start, len);
+	/* What? */
+	return NULL;
+}
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+	/* Nothing to do */
+}
+EXPORT_SYMBOL(pci_iomap);
+EXPORT_SYMBOL(pci_iounmap);
+
+
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type)					\
+static int								\
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
+{									\
+	return PCIBIOS_DEVICE_NOT_FOUND;    				\
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		 int len, u32 *val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		  int len, u32 val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops =
+{
+	null_read_config,
+	null_write_config
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+	static struct pci_bus bus;
+
+	if (hose == 0) {
+		hose = pci_bus_to_hose(busnr);
+		if (hose == 0)
+			printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
+	}
+	bus.number = busnr;
+	bus.sysdata = hose;
+	bus.ops = hose? hose->ops: &null_pci_ops;
+	return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type)					\
+int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
+			       int devfn, int offset, type value)	\
+{									\
+	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
+					    devfn, offset, value);	\
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
diff --git a/arch/ppc/kernel/perfmon.c b/arch/ppc/kernel/perfmon.c
new file mode 100644
index 00000000000..918f6b252e4
--- /dev/null
+++ b/arch/ppc/kernel/perfmon.c
@@ -0,0 +1,93 @@
+/* kernel/perfmon.c
+ * PPC 32 Performance Monitor Infrastructure
+ *
+ * Author: Andy Fleming
+ * Copyright (c) 2004 Freescale Semiconductor, Inc
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/interrupt.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/prctl.h>
+
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/reg.h>
+#include <asm/xmon.h>
+
+/* A lock to regulate grabbing the interrupt */
+DEFINE_SPINLOCK(perfmon_lock);
+
+#ifdef CONFIG_FSL_BOOKE
+static void dummy_perf(struct pt_regs *regs)
+{
+	unsigned int pmgc0 = mfpmr(PMRN_PMGC0);
+
+	pmgc0 &= ~PMGC0_PMIE;
+	mtpmr(PMRN_PMGC0, pmgc0);
+}
+
+#else
+/* Ensure exceptions are disabled */
+
+static void dummy_perf(struct pt_regs *regs)
+{
+	unsigned int mmcr0 = mfspr(SPRN_MMCR0);
+
+	mmcr0 &= ~MMCR0_PMXE;
+	mtspr(SPRN_MMCR0, mmcr0);
+}
+#endif
+
+void (*perf_irq)(struct pt_regs *) = dummy_perf;
+
+/* Grab the interrupt, if it's free.
+ * Returns 0 on success, -1 if the interrupt is taken already */
+int request_perfmon_irq(void (*handler)(struct pt_regs *))
+{
+	int err = 0;
+
+	spin_lock(&perfmon_lock);
+
+	if (perf_irq == dummy_perf)
+		perf_irq = handler;
+	else {
+		pr_info("perfmon irq already handled by %p\n", perf_irq);
+		err = -1;
+	}
+
+	spin_unlock(&perfmon_lock);
+
+	return err;
+}
+
+void free_perfmon_irq(void)
+{
+	spin_lock(&perfmon_lock);
+
+	perf_irq = dummy_perf;
+
+	spin_unlock(&perfmon_lock);
+}
+
+EXPORT_SYMBOL(perf_irq);
+EXPORT_SYMBOL(request_perfmon_irq);
+EXPORT_SYMBOL(free_perfmon_irq);
diff --git a/arch/ppc/kernel/perfmon_fsl_booke.c b/arch/ppc/kernel/perfmon_fsl_booke.c
new file mode 100644
index 00000000000..03526bfb084
--- /dev/null
+++ b/arch/ppc/kernel/perfmon_fsl_booke.c
@@ -0,0 +1,222 @@
+/* kernel/perfmon_fsl_booke.c
+ * Freescale Book-E Performance Monitor code
+ *
+ * Author: Andy Fleming
+ * Copyright (c) 2004 Freescale Semiconductor, Inc
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/interrupt.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/prctl.h>
+
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/reg.h>
+#include <asm/xmon.h>
+#include <asm/perfmon.h>
+
+static inline u32 get_pmlca(int ctr);
+static inline void set_pmlca(int ctr, u32 pmlca);
+
+static inline u32 get_pmlca(int ctr)
+{
+	u32 pmlca;
+
+	switch (ctr) {
+		case 0:
+			pmlca = mfpmr(PMRN_PMLCA0);
+			break;
+		case 1:
+			pmlca = mfpmr(PMRN_PMLCA1);
+			break;
+		case 2:
+			pmlca = mfpmr(PMRN_PMLCA2);
+			break;
+		case 3:
+			pmlca = mfpmr(PMRN_PMLCA3);
+			break;
+		default:
+			panic("Bad ctr number\n");
+	}
+
+	return pmlca;
+}
+
+static inline void set_pmlca(int ctr, u32 pmlca)
+{
+	switch (ctr) {
+		case 0:
+			mtpmr(PMRN_PMLCA0, pmlca);
+			break;
+		case 1:
+			mtpmr(PMRN_PMLCA1, pmlca);
+			break;
+		case 2:
+			mtpmr(PMRN_PMLCA2, pmlca);
+			break;
+		case 3:
+			mtpmr(PMRN_PMLCA3, pmlca);
+			break;
+		default:
+			panic("Bad ctr number\n");
+	}
+}
+
+void init_pmc_stop(int ctr)
+{
+	u32 pmlca = (PMLCA_FC | PMLCA_FCS | PMLCA_FCU |
+			PMLCA_FCM1 | PMLCA_FCM0);
+	u32 pmlcb = 0;
+
+	switch (ctr) {
+		case 0:
+			mtpmr(PMRN_PMLCA0, pmlca);
+			mtpmr(PMRN_PMLCB0, pmlcb);
+			break;
+		case 1:
+			mtpmr(PMRN_PMLCA1, pmlca);
+			mtpmr(PMRN_PMLCB1, pmlcb);
+			break;
+		case 2:
+			mtpmr(PMRN_PMLCA2, pmlca);
+			mtpmr(PMRN_PMLCB2, pmlcb);
+			break;
+		case 3:
+			mtpmr(PMRN_PMLCA3, pmlca);
+			mtpmr(PMRN_PMLCB3, pmlcb);
+			break;
+		default:
+			panic("Bad ctr number!\n");
+	}
+}
+
+void set_pmc_event(int ctr, int event)
+{
+	u32 pmlca;
+
+	pmlca = get_pmlca(ctr);
+
+	pmlca = (pmlca & ~PMLCA_EVENT_MASK) |
+		((event << PMLCA_EVENT_SHIFT) &
+		 PMLCA_EVENT_MASK);
+
+	set_pmlca(ctr, pmlca);
+}
+
+void set_pmc_user_kernel(int ctr, int user, int kernel)
+{
+	u32 pmlca;
+
+	pmlca = get_pmlca(ctr);
+
+	if(user)
+		pmlca &= ~PMLCA_FCU;
+	else
+		pmlca |= PMLCA_FCU;
+
+	if(kernel)
+		pmlca &= ~PMLCA_FCS;
+	else
+		pmlca |= PMLCA_FCS;
+
+	set_pmlca(ctr, pmlca);
+}
+
+void set_pmc_marked(int ctr, int mark0, int mark1)
+{
+	u32 pmlca = get_pmlca(ctr);
+
+	if(mark0)
+		pmlca &= ~PMLCA_FCM0;
+	else
+		pmlca |= PMLCA_FCM0;
+
+	if(mark1)
+		pmlca &= ~PMLCA_FCM1;
+	else
+		pmlca |= PMLCA_FCM1;
+
+	set_pmlca(ctr, pmlca);
+}
+
+void pmc_start_ctr(int ctr, int enable)
+{
+	u32 pmlca = get_pmlca(ctr);
+
+	pmlca &= ~PMLCA_FC;
+
+	if (enable)
+		pmlca |= PMLCA_CE;
+	else
+		pmlca &= ~PMLCA_CE;
+
+	set_pmlca(ctr, pmlca);
+}
+
+void pmc_start_ctrs(int enable)
+{
+	u32 pmgc0 = mfpmr(PMRN_PMGC0);
+
+	pmgc0 &= ~PMGC0_FAC;
+	pmgc0 |= PMGC0_FCECE;
+
+	if (enable)
+		pmgc0 |= PMGC0_PMIE;
+	else
+		pmgc0 &= ~PMGC0_PMIE;
+
+	mtpmr(PMRN_PMGC0, pmgc0);
+}
+
+void pmc_stop_ctrs(void)
+{
+	u32 pmgc0 = mfpmr(PMRN_PMGC0);
+
+	pmgc0 |= PMGC0_FAC;
+
+	pmgc0 &= ~(PMGC0_PMIE | PMGC0_FCECE);
+
+	mtpmr(PMRN_PMGC0, pmgc0);
+}
+
+void dump_pmcs(void)
+{
+	printk("pmgc0: %x\n", mfpmr(PMRN_PMGC0));
+	printk("pmc\t\tpmlca\t\tpmlcb\n");
+	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC0),
+			mfpmr(PMRN_PMLCA0), mfpmr(PMRN_PMLCB0));
+	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC1),
+			mfpmr(PMRN_PMLCA1), mfpmr(PMRN_PMLCB1));
+	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC2),
+			mfpmr(PMRN_PMLCA2), mfpmr(PMRN_PMLCB2));
+	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC3),
+			mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3));
+}
+
+EXPORT_SYMBOL(init_pmc_stop);
+EXPORT_SYMBOL(set_pmc_event);
+EXPORT_SYMBOL(set_pmc_user_kernel);
+EXPORT_SYMBOL(set_pmc_marked);
+EXPORT_SYMBOL(pmc_start_ctr);
+EXPORT_SYMBOL(pmc_start_ctrs);
+EXPORT_SYMBOL(pmc_stop_ctrs);
+EXPORT_SYMBOL(dump_pmcs);
diff --git a/arch/ppc/kernel/ppc-stub.c b/arch/ppc/kernel/ppc-stub.c
new file mode 100644
index 00000000000..d61889c2404
--- /dev/null
+++ b/arch/ppc/kernel/ppc-stub.c
@@ -0,0 +1,867 @@
+/*
+ * ppc-stub.c:  KGDB support for the Linux kernel.
+ *
+ * adapted from arch/sparc/kernel/sparc-stub.c for the PowerPC
+ * some stuff borrowed from Paul Mackerras' xmon
+ * Copyright (C) 1998 Michael AK Tesch (tesch@cs.wisc.edu)
+ *
+ * Modifications to run under Linux
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * This file originally came from the gdb sources, and the
+ * copyright notices have been retained below.
+ */
+
+/****************************************************************************
+
+		THIS SOFTWARE IS NOT COPYRIGHTED
+
+   HP offers the following for use in the public domain.  HP makes no
+   warranty with regard to the software or its performance and the
+   user accepts the software "AS IS" with all faults.
+
+   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
+   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+****************************************************************************/
+
+/****************************************************************************
+ *  Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
+ *
+ *  Module name: remcom.c $
+ *  Revision: 1.34 $
+ *  Date: 91/03/09 12:29:49 $
+ *  Contributor:     Lake Stevens Instrument Division$
+ *
+ *  Description:     low level support for gdb debugger. $
+ *
+ *  Considerations:  only works on target hardware $
+ *
+ *  Written by:      Glenn Engel $
+ *  ModuleState:     Experimental $
+ *
+ *  NOTES:           See Below $
+ *
+ *  Modified for SPARC by Stu Grossman, Cygnus Support.
+ *
+ *  This code has been extensively tested on the Fujitsu SPARClite demo board.
+ *
+ *  To enable debugger support, two things need to happen.  One, a
+ *  call to set_debug_traps() is necessary in order to allow any breakpoints
+ *  or error conditions to be properly intercepted and reported to gdb.
+ *  Two, a breakpoint needs to be generated to begin communication.  This
+ *  is most easily accomplished by a call to breakpoint().  Breakpoint()
+ *  simulates a breakpoint by executing a trap #1.
+ *
+ *************
+ *
+ *    The following gdb commands are supported:
+ *
+ * command          function		          Return value
+ *
+ *    g             return the value of the CPU registers  hex data or ENN
+ *    G             set the value of the CPU registers     OK or ENN
+ *    qOffsets      Get section offsets.  Reply is Text=xxx;Data=yyy;Bss=zzz
+ *
+ *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
+ *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
+ *
+ *    c             Resume at current address              SNN   ( signal NN)
+ *    cAA..AA       Continue at address AA..AA             SNN
+ *
+ *    s             Step one instruction                   SNN
+ *    sAA..AA       Step one instruction from AA..AA       SNN
+ *
+ *    k             kill
+ *
+ *    ?             What was the last sigval ?             SNN   (signal NN)
+ *
+ *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
+ *							   baud rate
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum.  A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum>    :: <two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer.  '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host:                  Reply:
+ * $m0,10#2a               +$00010203040506070809101112131415#42
+ *
+ ****************************************************************************/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/sysrq.h>
+
+#include <asm/cacheflush.h>
+#include <asm/system.h>
+#include <asm/signal.h>
+#include <asm/kgdb.h>
+#include <asm/pgtable.h>
+#include <asm/ptrace.h>
+
+void breakinst(void);
+
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound buffers
+ * at least NUMREGBYTES*2 are needed for register packets
+ */
+#define BUFMAX 2048
+static char remcomInBuffer[BUFMAX];
+static char remcomOutBuffer[BUFMAX];
+
+static int initialized;
+static int kgdb_active;
+static int kgdb_started;
+static u_int fault_jmp_buf[100];
+static int kdebug;
+
+
+static const char hexchars[]="0123456789abcdef";
+
+/* Place where we save old trap entries for restoration - sparc*/
+/* struct tt_entry kgdb_savettable[256]; */
+/* typedef void (*trapfunc_t)(void); */
+
+static void kgdb_fault_handler(struct pt_regs *regs);
+static int handle_exception (struct pt_regs *regs);
+
+#if 0
+/* Install an exception handler for kgdb */
+static void exceptionHandler(int tnum, unsigned int *tfunc)
+{
+	/* We are dorking with a live trap table, all irqs off */
+}
+#endif
+
+int
+kgdb_setjmp(long *buf)
+{
+	asm ("mflr 0; stw 0,0(%0);"
+	     "stw 1,4(%0); stw 2,8(%0);"
+	     "mfcr 0; stw 0,12(%0);"
+	     "stmw 13,16(%0)"
+	     : : "r" (buf));
+	/* XXX should save fp regs as well */
+	return 0;
+}
+void
+kgdb_longjmp(long *buf, int val)
+{
+	if (val == 0)
+		val = 1;
+	asm ("lmw 13,16(%0);"
+	     "lwz 0,12(%0); mtcrf 0x38,0;"
+	     "lwz 0,0(%0); lwz 1,4(%0); lwz 2,8(%0);"
+	     "mtlr 0; mr 3,%1"
+	     : : "r" (buf), "r" (val));
+}
+/* Convert ch from a hex digit to an int */
+static int
+hex(unsigned char ch)
+{
+	if (ch >= 'a' && ch <= 'f')
+		return ch-'a'+10;
+	if (ch >= '0' && ch <= '9')
+		return ch-'0';
+	if (ch >= 'A' && ch <= 'F')
+		return ch-'A'+10;
+	return -1;
+}
+
+/* Convert the memory pointed to by mem into hex, placing result in buf.
+ * Return a pointer to the last char put in buf (null), in case of mem fault,
+ * return 0.
+ */
+static unsigned char *
+mem2hex(const char *mem, char *buf, int count)
+{
+	unsigned char ch;
+	unsigned short tmp_s;
+	unsigned long tmp_l;
+
+	if (kgdb_setjmp((long*)fault_jmp_buf) == 0) {
+		debugger_fault_handler = kgdb_fault_handler;
+
+		/* Accessing 16 bit and 32 bit objects in a single
+		** load instruction is required to avoid bad side
+		** effects for some IO registers.
+		*/
+
+		if ((count == 2) && (((long)mem & 1) == 0)) {
+			tmp_s = *(unsigned short *)mem;
+			mem += 2;
+			*buf++ = hexchars[(tmp_s >> 12) & 0xf];
+			*buf++ = hexchars[(tmp_s >> 8) & 0xf];
+			*buf++ = hexchars[(tmp_s >> 4) & 0xf];
+			*buf++ = hexchars[tmp_s & 0xf];
+
+		} else if ((count == 4) && (((long)mem & 3) == 0)) {
+			tmp_l = *(unsigned int *)mem;
+			mem += 4;
+			*buf++ = hexchars[(tmp_l >> 28) & 0xf];
+			*buf++ = hexchars[(tmp_l >> 24) & 0xf];
+			*buf++ = hexchars[(tmp_l >> 20) & 0xf];
+			*buf++ = hexchars[(tmp_l >> 16) & 0xf];
+			*buf++ = hexchars[(tmp_l >> 12) & 0xf];
+			*buf++ = hexchars[(tmp_l >> 8) & 0xf];
+			*buf++ = hexchars[(tmp_l >> 4) & 0xf];
+			*buf++ = hexchars[tmp_l & 0xf];
+
+		} else {
+			while (count-- > 0) {
+				ch = *mem++;
+				*buf++ = hexchars[ch >> 4];
+				*buf++ = hexchars[ch & 0xf];
+			}
+		}
+
+	} else {
+		/* error condition */
+	}
+	debugger_fault_handler = NULL;
+	*buf = 0;
+	return buf;
+}
+
+/* convert the hex array pointed to by buf into binary to be placed in mem
+ * return a pointer to the character AFTER the last byte written.
+*/
+static char *
+hex2mem(char *buf, char *mem, int count)
+{
+	unsigned char ch;
+	int i;
+	char *orig_mem;
+	unsigned short tmp_s;
+	unsigned long tmp_l;
+
+	orig_mem = mem;
+
+	if (kgdb_setjmp((long*)fault_jmp_buf) == 0) {
+		debugger_fault_handler = kgdb_fault_handler;
+
+		/* Accessing 16 bit and 32 bit objects in a single
+		** store instruction is required to avoid bad side
+		** effects for some IO registers.
+		*/
+
+		if ((count == 2) && (((long)mem & 1) == 0)) {
+			tmp_s = hex(*buf++) << 12;
+			tmp_s |= hex(*buf++) << 8;
+			tmp_s |= hex(*buf++) << 4;
+			tmp_s |= hex(*buf++);
+
+			*(unsigned short *)mem = tmp_s;
+			mem += 2;
+
+		} else if ((count == 4) && (((long)mem & 3) == 0)) {
+			tmp_l = hex(*buf++) << 28;
+			tmp_l |= hex(*buf++) << 24;
+			tmp_l |= hex(*buf++) << 20;
+			tmp_l |= hex(*buf++) << 16;
+			tmp_l |= hex(*buf++) << 12;
+			tmp_l |= hex(*buf++) << 8;
+			tmp_l |= hex(*buf++) << 4;
+			tmp_l |= hex(*buf++);
+
+			*(unsigned long *)mem = tmp_l;
+			mem += 4;
+
+		} else {
+			for (i=0; i<count; i++) {
+				ch = hex(*buf++) << 4;
+				ch |= hex(*buf++);
+				*mem++ = ch;
+			}
+		}
+
+
+		/*
+		** Flush the data cache, invalidate the instruction cache.
+		*/
+		flush_icache_range((int)orig_mem, (int)orig_mem + count - 1);
+
+	} else {
+		/* error condition */
+	}
+	debugger_fault_handler = NULL;
+	return mem;
+}
+
+/*
+ * While we find nice hex chars, build an int.
+ * Return number of chars processed.
+ */
+static int
+hexToInt(char **ptr, int *intValue)
+{
+	int numChars = 0;
+	int hexValue;
+
+	*intValue = 0;
+
+	if (kgdb_setjmp((long*)fault_jmp_buf) == 0) {
+		debugger_fault_handler = kgdb_fault_handler;
+		while (**ptr) {
+			hexValue = hex(**ptr);
+			if (hexValue < 0)
+				break;
+
+			*intValue = (*intValue << 4) | hexValue;
+			numChars ++;
+
+			(*ptr)++;
+		}
+	} else {
+		/* error condition */
+	}
+	debugger_fault_handler = NULL;
+
+	return (numChars);
+}
+
+/* scan for the sequence $<data>#<checksum> */
+static void
+getpacket(char *buffer)
+{
+	unsigned char checksum;
+	unsigned char xmitcsum;
+	int i;
+	int count;
+	unsigned char ch;
+
+	do {
+		/* wait around for the start character, ignore all other
+		 * characters */
+		while ((ch = (getDebugChar() & 0x7f)) != '$') ;
+
+		checksum = 0;
+		xmitcsum = -1;
+
+		count = 0;
+
+		/* now, read until a # or end of buffer is found */
+		while (count < BUFMAX) {
+			ch = getDebugChar() & 0x7f;
+			if (ch == '#')
+				break;
+			checksum = checksum + ch;
+			buffer[count] = ch;
+			count = count + 1;
+		}
+
+		if (count >= BUFMAX)
+			continue;
+
+		buffer[count] = 0;
+
+		if (ch == '#') {
+			xmitcsum = hex(getDebugChar() & 0x7f) << 4;
+			xmitcsum |= hex(getDebugChar() & 0x7f);
+			if (checksum != xmitcsum)
+				putDebugChar('-');	/* failed checksum */
+			else {
+				putDebugChar('+'); /* successful transfer */
+				/* if a sequence char is present, reply the ID */
+				if (buffer[2] == ':') {
+					putDebugChar(buffer[0]);
+					putDebugChar(buffer[1]);
+					/* remove sequence chars from buffer */
+					count = strlen(buffer);
+					for (i=3; i <= count; i++)
+						buffer[i-3] = buffer[i];
+				}
+			}
+		}
+	} while (checksum != xmitcsum);
+}
+
+/* send the packet in buffer. */
+static void putpacket(unsigned char *buffer)
+{
+	unsigned char checksum;
+	int count;
+	unsigned char ch, recv;
+
+	/* $<packet info>#<checksum>. */
+	do {
+		putDebugChar('$');
+		checksum = 0;
+		count = 0;
+
+		while ((ch = buffer[count])) {
+			putDebugChar(ch);
+			checksum += ch;
+			count += 1;
+		}
+
+		putDebugChar('#');
+		putDebugChar(hexchars[checksum >> 4]);
+		putDebugChar(hexchars[checksum & 0xf]);
+		recv = getDebugChar();
+	} while ((recv & 0x7f) != '+');
+}
+
+static void kgdb_flush_cache_all(void)
+{
+	flush_instruction_cache();
+}
+
+/* Set up exception handlers for tracing and breakpoints
+ * [could be called kgdb_init()]
+ */
+void set_debug_traps(void)
+{
+#if 0
+	unsigned char c;
+
+	save_and_cli(flags);
+
+	/* In case GDB is started before us, ack any packets (presumably
+	 * "$?#xx") sitting there.
+	 *
+	 * I've found this code causes more problems than it solves,
+	 * so that's why it's commented out.  GDB seems to work fine
+	 * now starting either before or after the kernel   -bwb
+	 */
+
+	while((c = getDebugChar()) != '$');
+	while((c = getDebugChar()) != '#');
+	c = getDebugChar(); /* eat first csum byte */
+	c = getDebugChar(); /* eat second csum byte */
+	putDebugChar('+'); /* ack it */
+#endif
+	debugger = kgdb;
+	debugger_bpt = kgdb_bpt;
+	debugger_sstep = kgdb_sstep;
+	debugger_iabr_match = kgdb_iabr_match;
+	debugger_dabr_match = kgdb_dabr_match;
+
+	initialized = 1;
+}
+
+static void kgdb_fault_handler(struct pt_regs *regs)
+{
+	kgdb_longjmp((long*)fault_jmp_buf, 1);
+}
+
+int kgdb_bpt(struct pt_regs *regs)
+{
+	return handle_exception(regs);
+}
+
+int kgdb_sstep(struct pt_regs *regs)
+{
+	return handle_exception(regs);
+}
+
+void kgdb(struct pt_regs *regs)
+{
+	handle_exception(regs);
+}
+
+int kgdb_iabr_match(struct pt_regs *regs)
+{
+	printk(KERN_ERR "kgdb doesn't support iabr, what?!?\n");
+	return handle_exception(regs);
+}
+
+int kgdb_dabr_match(struct pt_regs *regs)
+{
+	printk(KERN_ERR "kgdb doesn't support dabr, what?!?\n");
+	return handle_exception(regs);
+}
+
+/* Convert the hardware trap type code to a unix signal number. */
+/*
+ * This table contains the mapping between PowerPC hardware trap types, and
+ * signals, which are primarily what GDB understands.
+ */
+static struct hard_trap_info
+{
+	unsigned int tt;		/* Trap type code for powerpc */
+	unsigned char signo;		/* Signal that we map this trap into */
+} hard_trap_info[] = {
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+	{ 0x100, SIGINT  },		/* critical input interrupt */
+	{ 0x200, SIGSEGV },		/* machine check */
+	{ 0x300, SIGSEGV },		/* data storage */
+	{ 0x400, SIGBUS  },		/* instruction storage */
+	{ 0x500, SIGINT  },		/* interrupt */
+	{ 0x600, SIGBUS  },		/* alignment */
+	{ 0x700, SIGILL  },		/* program */
+	{ 0x800, SIGILL  },		/* reserved */
+	{ 0x900, SIGILL  },		/* reserved */
+	{ 0xa00, SIGILL  },		/* reserved */
+	{ 0xb00, SIGILL  },		/* reserved */
+	{ 0xc00, SIGCHLD },		/* syscall */
+	{ 0xd00, SIGILL  },		/* reserved */
+	{ 0xe00, SIGILL  },		/* reserved */
+	{ 0xf00, SIGILL  },		/* reserved */
+	/*
+	** 0x1000  PIT
+	** 0x1010  FIT
+	** 0x1020  watchdog
+	** 0x1100  data TLB miss
+	** 0x1200  instruction TLB miss
+	*/
+	{ 0x2002, SIGTRAP},		/* debug */
+#else
+	{ 0x200, SIGSEGV },		/* machine check */
+	{ 0x300, SIGSEGV },		/* address error (store) */
+	{ 0x400, SIGBUS },		/* instruction bus error */
+	{ 0x500, SIGINT },		/* interrupt */
+	{ 0x600, SIGBUS },		/* alingment */
+	{ 0x700, SIGTRAP },		/* breakpoint trap */
+	{ 0x800, SIGFPE },		/* fpu unavail */
+	{ 0x900, SIGALRM },		/* decrementer */
+	{ 0xa00, SIGILL },		/* reserved */
+	{ 0xb00, SIGILL },		/* reserved */
+	{ 0xc00, SIGCHLD },		/* syscall */
+	{ 0xd00, SIGTRAP },		/* single-step/watch */
+	{ 0xe00, SIGFPE },		/* fp assist */
+#endif
+	{ 0, 0}				/* Must be last */
+
+};
+
+static int computeSignal(unsigned int tt)
+{
+	struct hard_trap_info *ht;
+
+	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+		if (ht->tt == tt)
+			return ht->signo;
+
+	return SIGHUP; /* default for things we don't know about */
+}
+
+#define PC_REGNUM 64
+#define SP_REGNUM 1
+
+/*
+ * This function does all command processing for interfacing to gdb.
+ */
+static int
+handle_exception (struct pt_regs *regs)
+{
+	int sigval;
+	int addr;
+	int length;
+	char *ptr;
+	unsigned int msr;
+
+	/* We don't handle user-mode breakpoints. */
+	if (user_mode(regs))
+		return 0;
+
+	if (debugger_fault_handler) {
+		debugger_fault_handler(regs);
+		panic("kgdb longjump failed!\n");
+	}
+	if (kgdb_active) {
+		printk(KERN_ERR "interrupt while in kgdb, returning\n");
+		return 0;
+	}
+
+	kgdb_active = 1;
+	kgdb_started = 1;
+
+#ifdef KGDB_DEBUG
+	printk("kgdb: entering handle_exception; trap [0x%x]\n",
+			(unsigned int)regs->trap);
+#endif
+
+	kgdb_interruptible(0);
+	lock_kernel();
+	msr = mfmsr();
+	mtmsr(msr & ~MSR_EE);	/* disable interrupts */
+
+	if (regs->nip == (unsigned long)breakinst) {
+		/* Skip over breakpoint trap insn */
+		regs->nip += 4;
+	}
+
+	/* reply to host that an exception has occurred */
+	sigval = computeSignal(regs->trap);
+	ptr = remcomOutBuffer;
+
+	*ptr++ = 'T';
+	*ptr++ = hexchars[sigval >> 4];
+	*ptr++ = hexchars[sigval & 0xf];
+	*ptr++ = hexchars[PC_REGNUM >> 4];
+	*ptr++ = hexchars[PC_REGNUM & 0xf];
+	*ptr++ = ':';
+	ptr = mem2hex((char *)&regs->nip, ptr, 4);
+	*ptr++ = ';';
+	*ptr++ = hexchars[SP_REGNUM >> 4];
+	*ptr++ = hexchars[SP_REGNUM & 0xf];
+	*ptr++ = ':';
+	ptr = mem2hex(((char *)regs) + SP_REGNUM*4, ptr, 4);
+	*ptr++ = ';';
+	*ptr++ = 0;
+
+	putpacket(remcomOutBuffer);
+	if (kdebug)
+		printk("remcomOutBuffer: %s\n", remcomOutBuffer);
+
+	/* XXX We may want to add some features dealing with poking the
+	 * XXX page tables, ... (look at sparc-stub.c for more info)
+	 * XXX also required hacking to the gdb sources directly...
+	 */
+
+	while (1) {
+		remcomOutBuffer[0] = 0;
+
+		getpacket(remcomInBuffer);
+		switch (remcomInBuffer[0]) {
+		case '?': /* report most recent signal */
+			remcomOutBuffer[0] = 'S';
+			remcomOutBuffer[1] = hexchars[sigval >> 4];
+			remcomOutBuffer[2] = hexchars[sigval & 0xf];
+			remcomOutBuffer[3] = 0;
+			break;
+#if 0
+		case 'q': /* this screws up gdb for some reason...*/
+		{
+			extern long _start, sdata, __bss_start;
+
+			ptr = &remcomInBuffer[1];
+			if (strncmp(ptr, "Offsets", 7) != 0)
+				break;
+
+			ptr = remcomOutBuffer;
+			sprintf(ptr, "Text=%8.8x;Data=%8.8x;Bss=%8.8x",
+				&_start, &sdata, &__bss_start);
+			break;
+		}
+#endif
+		case 'd':
+			/* toggle debug flag */
+			kdebug ^= 1;
+			break;
+
+		case 'g':	/* return the value of the CPU registers.
+				 * some of them are non-PowerPC names :(
+				 * they are stored in gdb like:
+				 * struct {
+				 *     u32 gpr[32];
+				 *     f64 fpr[32];
+				 *     u32 pc, ps, cnd, lr; (ps=msr)
+				 *     u32 cnt, xer, mq;
+				 * }
+				 */
+		{
+			int i;
+			ptr = remcomOutBuffer;
+			/* General Purpose Regs */
+			ptr = mem2hex((char *)regs, ptr, 32 * 4);
+			/* Floating Point Regs - FIXME */
+			/*ptr = mem2hex((char *), ptr, 32 * 8);*/
+			for(i=0; i<(32*8*2); i++) { /* 2chars/byte */
+				ptr[i] = '0';
+			}
+			ptr += 32*8*2;
+			/* pc, msr, cr, lr, ctr, xer, (mq is unused) */
+			ptr = mem2hex((char *)&regs->nip, ptr, 4);
+			ptr = mem2hex((char *)&regs->msr, ptr, 4);
+			ptr = mem2hex((char *)&regs->ccr, ptr, 4);
+			ptr = mem2hex((char *)&regs->link, ptr, 4);
+			ptr = mem2hex((char *)&regs->ctr, ptr, 4);
+			ptr = mem2hex((char *)&regs->xer, ptr, 4);
+		}
+			break;
+
+		case 'G': /* set the value of the CPU registers */
+		{
+			ptr = &remcomInBuffer[1];
+
+			/*
+			 * If the stack pointer has moved, you should pray.
+			 * (cause only god can help you).
+			 */
+
+			/* General Purpose Regs */
+			hex2mem(ptr, (char *)regs, 32 * 4);
+
+			/* Floating Point Regs - FIXME?? */
+			/*ptr = hex2mem(ptr, ??, 32 * 8);*/
+			ptr += 32*8*2;
+
+			/* pc, msr, cr, lr, ctr, xer, (mq is unused) */
+			ptr = hex2mem(ptr, (char *)&regs->nip, 4);
+			ptr = hex2mem(ptr, (char *)&regs->msr, 4);
+			ptr = hex2mem(ptr, (char *)&regs->ccr, 4);
+			ptr = hex2mem(ptr, (char *)&regs->link, 4);
+			ptr = hex2mem(ptr, (char *)&regs->ctr, 4);
+			ptr = hex2mem(ptr, (char *)&regs->xer, 4);
+
+			strcpy(remcomOutBuffer,"OK");
+		}
+			break;
+		case 'H':
+			/* don't do anything, yet, just acknowledge */
+			hexToInt(&ptr, &addr);
+			strcpy(remcomOutBuffer,"OK");
+			break;
+
+		case 'm':	/* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
+				/* Try to read %x,%x.  */
+
+			ptr = &remcomInBuffer[1];
+
+			if (hexToInt(&ptr, &addr) && *ptr++ == ','
+					&& hexToInt(&ptr, &length)) {
+				if (mem2hex((char *)addr, remcomOutBuffer,
+							length))
+					break;
+				strcpy(remcomOutBuffer, "E03");
+			} else
+				strcpy(remcomOutBuffer, "E01");
+			break;
+
+		case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
+			/* Try to read '%x,%x:'.  */
+
+			ptr = &remcomInBuffer[1];
+
+			if (hexToInt(&ptr, &addr) && *ptr++ == ','
+					&& hexToInt(&ptr, &length)
+					&& *ptr++ == ':') {
+				if (hex2mem(ptr, (char *)addr, length))
+					strcpy(remcomOutBuffer, "OK");
+				else
+					strcpy(remcomOutBuffer, "E03");
+				flush_icache_range(addr, addr+length);
+			} else
+				strcpy(remcomOutBuffer, "E02");
+			break;
+
+
+		case 'k': /* kill the program, actually just continue */
+		case 'c': /* cAA..AA  Continue; address AA..AA optional */
+			/* try to read optional parameter, pc unchanged if no parm */
+
+			ptr = &remcomInBuffer[1];
+			if (hexToInt(&ptr, &addr))
+				regs->nip = addr;
+
+/* Need to flush the instruction cache here, as we may have deposited a
+ * breakpoint, and the icache probably has no way of knowing that a data ref to
+ * some location may have changed something that is in the instruction cache.
+ */
+			kgdb_flush_cache_all();
+			mtmsr(msr);
+
+			kgdb_interruptible(1);
+			unlock_kernel();
+			kgdb_active = 0;
+			if (kdebug) {
+				printk("remcomInBuffer: %s\n", remcomInBuffer);
+				printk("remcomOutBuffer: %s\n", remcomOutBuffer);
+			}
+			return 1;
+
+		case 's':
+			kgdb_flush_cache_all();
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC);
+			regs->msr |= MSR_DE;
+#else
+			regs->msr |= MSR_SE;
+#endif
+			unlock_kernel();
+			kgdb_active = 0;
+			if (kdebug) {
+				printk("remcomInBuffer: %s\n", remcomInBuffer);
+				printk("remcomOutBuffer: %s\n", remcomOutBuffer);
+			}
+			return 1;
+
+		case 'r':		/* Reset (if user process..exit ???)*/
+			panic("kgdb reset.");
+			break;
+		}			/* switch */
+		if (remcomOutBuffer[0] && kdebug) {
+			printk("remcomInBuffer: %s\n", remcomInBuffer);
+			printk("remcomOutBuffer: %s\n", remcomOutBuffer);
+		}
+		/* reply to the request */
+		putpacket(remcomOutBuffer);
+	} /* while(1) */
+}
+
+/* This function will generate a breakpoint exception.  It is used at the
+   beginning of a program to sync up with a debugger and can be used
+   otherwise as a quick means to stop program execution and "break" into
+   the debugger. */
+
+void
+breakpoint(void)
+{
+	if (!initialized) {
+		printk("breakpoint() called b4 kgdb init\n");
+		return;
+	}
+
+	asm("	.globl breakinst	\n\
+	     breakinst: .long 0x7d821008");
+}
+
+#ifdef CONFIG_KGDB_CONSOLE
+/* Output string in GDB O-packet format if GDB has connected. If nothing
+   output, returns 0 (caller must then handle output). */
+int
+kgdb_output_string (const char* s, unsigned int count)
+{
+	char buffer[512];
+
+	if (!kgdb_started)
+		return 0;
+
+	count = (count <= (sizeof(buffer) / 2 - 2))
+		? count : (sizeof(buffer) / 2 - 2);
+
+	buffer[0] = 'O';
+	mem2hex (s, &buffer[1], count);
+	putpacket(buffer);
+
+	return 1;
+}
+#endif
+
+static void sysrq_handle_gdb(int key, struct pt_regs *pt_regs,
+			     struct tty_struct *tty)
+{
+	printk("Entering GDB stub\n");
+	breakpoint();
+}
+static struct sysrq_key_op sysrq_gdb_op = {
+        .handler        = sysrq_handle_gdb,
+        .help_msg       = "Gdb",
+        .action_msg     = "GDB",
+};
+
+static int gdb_register_sysrq(void)
+{
+	printk("Registering GDB sysrq handler\n");
+	register_sysrq_key('g', &sysrq_gdb_op);
+	return 0;
+}
+module_init(gdb_register_sysrq);
diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c
new file mode 100644
index 00000000000..ca810025993
--- /dev/null
+++ b/arch/ppc/kernel/ppc_htab.c
@@ -0,0 +1,467 @@
+/*
+ * PowerPC hash table management proc entry.  Will show information
+ * about the current hash table and will allow changes to it.
+ *
+ * Written by Cort Dougan (cort@cs.nmt.edu)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/sysctl.h>
+#include <linux/ctype.h>
+#include <linux/threads.h>
+#include <linux/smp_lock.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/uaccess.h>
+#include <asm/mmu.h>
+#include <asm/residual.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/system.h>
+#include <asm/reg.h>
+
+static int ppc_htab_show(struct seq_file *m, void *v);
+static ssize_t ppc_htab_write(struct file * file, const char __user * buffer,
+			      size_t count, loff_t *ppos);
+extern PTE *Hash, *Hash_end;
+extern unsigned long Hash_size, Hash_mask;
+extern unsigned long _SDR1;
+extern unsigned long htab_reloads;
+extern unsigned long htab_preloads;
+extern unsigned long htab_evicts;
+extern unsigned long pte_misses;
+extern unsigned long pte_errors;
+extern unsigned int primary_pteg_full;
+extern unsigned int htab_hash_searches;
+
+static int ppc_htab_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ppc_htab_show, NULL);
+}
+
+struct file_operations ppc_htab_operations = {
+	.open		= ppc_htab_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.write		= ppc_htab_write,
+	.release	= single_release,
+};
+
+static char *pmc1_lookup(unsigned long mmcr0)
+{
+	switch ( mmcr0 & (0x7f<<7) )
+	{
+	case 0x0:
+		return "none";
+	case MMCR0_PMC1_CYCLES:
+		return "cycles";
+	case MMCR0_PMC1_ICACHEMISS:
+		return "ic miss";
+	case MMCR0_PMC1_DTLB:
+		return "dtlb miss";
+	default:
+		return "unknown";
+	}
+}
+
+static char *pmc2_lookup(unsigned long mmcr0)
+{
+	switch ( mmcr0 & 0x3f )
+	{
+	case 0x0:
+		return "none";
+	case MMCR0_PMC2_CYCLES:
+		return "cycles";
+	case MMCR0_PMC2_DCACHEMISS:
+		return "dc miss";
+	case MMCR0_PMC2_ITLB:
+		return "itlb miss";
+	case MMCR0_PMC2_LOADMISSTIME:
+		return "load miss time";
+	default:
+		return "unknown";
+	}
+}
+
+/*
+ * print some useful info about the hash table.  This function
+ * is _REALLY_ slow (see the nested for loops below) but nothing
+ * in here should be really timing critical. -- Cort
+ */
+static int ppc_htab_show(struct seq_file *m, void *v)
+{
+	unsigned long mmcr0 = 0, pmc1 = 0, pmc2 = 0;
+#if defined(CONFIG_PPC_STD_MMU) && !defined(CONFIG_PPC64BRIDGE)
+	unsigned int kptes = 0, uptes = 0;
+	PTE *ptr;
+#endif /* CONFIG_PPC_STD_MMU */
+
+	if (cpu_has_feature(CPU_FTR_604_PERF_MON)) {
+		mmcr0 = mfspr(SPRN_MMCR0);
+		pmc1 = mfspr(SPRN_PMC1);
+		pmc2 = mfspr(SPRN_PMC2);
+		seq_printf(m,
+			      "604 Performance Monitoring\n"
+			      "MMCR0\t\t: %08lx %s%s ",
+			      mmcr0,
+			      ( mmcr0>>28 & 0x2 ) ? "(user mode counted)" : "",
+			      ( mmcr0>>28 & 0x4 ) ? "(kernel mode counted)" : "");
+		seq_printf(m,
+			      "\nPMC1\t\t: %08lx (%s)\n"
+			      "PMC2\t\t: %08lx (%s)\n",
+			      pmc1, pmc1_lookup(mmcr0),
+			      pmc2, pmc2_lookup(mmcr0));
+	}
+
+#ifdef CONFIG_PPC_STD_MMU
+	/* if we don't have a htab */
+	if ( Hash_size == 0 ) {
+		seq_printf(m, "No Hash Table used\n");
+		return 0;
+	}
+
+#ifndef CONFIG_PPC64BRIDGE
+	for (ptr = Hash; ptr < Hash_end; ptr++) {
+		unsigned int mctx, vsid;
+
+		if (!ptr->v)
+			continue;
+		/* undo the esid skew */
+		vsid = ptr->vsid;
+		mctx = ((vsid - (vsid & 0xf) * 0x111) >> 4) & 0xfffff;
+		if (mctx == 0)
+			kptes++;
+		else
+			uptes++;
+	}
+#endif
+
+	seq_printf(m,
+		      "PTE Hash Table Information\n"
+		      "Size\t\t: %luKb\n"
+		      "Buckets\t\t: %lu\n"
+ 		      "Address\t\t: %08lx\n"
+		      "Entries\t\t: %lu\n"
+#ifndef CONFIG_PPC64BRIDGE
+		      "User ptes\t: %u\n"
+		      "Kernel ptes\t: %u\n"
+		      "Percent full\t: %lu%%\n"
+#endif
+                      , (unsigned long)(Hash_size>>10),
+		      (Hash_size/(sizeof(PTE)*8)),
+		      (unsigned long)Hash,
+		      Hash_size/sizeof(PTE)
+#ifndef CONFIG_PPC64BRIDGE
+                      , uptes,
+		      kptes,
+		      ((kptes+uptes)*100) / (Hash_size/sizeof(PTE))
+#endif
+		);
+
+	seq_printf(m,
+		      "Reloads\t\t: %lu\n"
+		      "Preloads\t: %lu\n"
+		      "Searches\t: %u\n"
+		      "Overflows\t: %u\n"
+		      "Evicts\t\t: %lu\n",
+		      htab_reloads, htab_preloads, htab_hash_searches,
+		      primary_pteg_full, htab_evicts);
+#endif /* CONFIG_PPC_STD_MMU */
+
+	seq_printf(m,
+		      "Non-error misses: %lu\n"
+		      "Error misses\t: %lu\n",
+		      pte_misses, pte_errors);
+	return 0;
+}
+
+/*
+ * Allow user to define performance counters and resize the hash table
+ */
+static ssize_t ppc_htab_write(struct file * file, const char __user * ubuffer,
+			      size_t count, loff_t *ppos)
+{
+#ifdef CONFIG_PPC_STD_MMU
+	unsigned long tmp;
+	char buffer[16];
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+	if (strncpy_from_user(buffer, ubuffer, 15))
+		return -EFAULT;
+	buffer[15] = 0;
+
+	/* don't set the htab size for now */
+	if ( !strncmp( buffer, "size ", 5) )
+		return -EBUSY;
+
+	if ( !strncmp( buffer, "reset", 5) )
+	{
+		if (cpu_has_feature(CPU_FTR_604_PERF_MON)) {
+			/* reset PMC1 and PMC2 */
+			mtspr(SPRN_PMC1, 0);
+			mtspr(SPRN_PMC2, 0);
+		}
+		htab_reloads = 0;
+		htab_evicts = 0;
+		pte_misses = 0;
+		pte_errors = 0;
+	}
+
+	/* Everything below here requires the performance monitor feature. */
+	if (!cpu_has_feature(CPU_FTR_604_PERF_MON))
+		return count;
+
+	/* turn off performance monitoring */
+	if ( !strncmp( buffer, "off", 3) )
+	{
+		mtspr(SPRN_MMCR0, 0);
+		mtspr(SPRN_PMC1, 0);
+		mtspr(SPRN_PMC2, 0);
+	}
+
+	if ( !strncmp( buffer, "user", 4) )
+	{
+		/* setup mmcr0 and clear the correct pmc */
+		tmp = (mfspr(SPRN_MMCR0) & ~(0x60000000)) | 0x20000000;
+		mtspr(SPRN_MMCR0, tmp);
+		mtspr(SPRN_PMC1, 0);
+		mtspr(SPRN_PMC2, 0);
+	}
+
+	if ( !strncmp( buffer, "kernel", 6) )
+	{
+		/* setup mmcr0 and clear the correct pmc */
+		tmp = (mfspr(SPRN_MMCR0) & ~(0x60000000)) | 0x40000000;
+		mtspr(SPRN_MMCR0, tmp);
+		mtspr(SPRN_PMC1, 0);
+		mtspr(SPRN_PMC2, 0);
+	}
+
+	/* PMC1 values */
+	if ( !strncmp( buffer, "dtlb", 4) )
+	{
+		/* setup mmcr0 and clear the correct pmc */
+		tmp = (mfspr(SPRN_MMCR0) & ~(0x7F << 7)) | MMCR0_PMC1_DTLB;
+		mtspr(SPRN_MMCR0, tmp);
+		mtspr(SPRN_PMC1, 0);
+	}
+
+	if ( !strncmp( buffer, "ic miss", 7) )
+	{
+		/* setup mmcr0 and clear the correct pmc */
+		tmp = (mfspr(SPRN_MMCR0) & ~(0x7F<<7)) | MMCR0_PMC1_ICACHEMISS;
+		mtspr(SPRN_MMCR0, tmp);
+		mtspr(SPRN_PMC1, 0);
+	}
+
+	/* PMC2 values */
+	if ( !strncmp( buffer, "load miss time", 14) )
+	{
+		/* setup mmcr0 and clear the correct pmc */
+	       asm volatile(
+		       "mfspr %0,%1\n\t"     /* get current mccr0 */
+		       "rlwinm %0,%0,0,0,31-6\n\t"  /* clear bits [26-31] */
+		       "ori   %0,%0,%2 \n\t" /* or in mmcr0 settings */
+		       "mtspr %1,%0 \n\t"    /* set new mccr0 */
+		       "mtspr %3,%4 \n\t"    /* reset the pmc */
+		       : "=r" (tmp)
+		       : "i" (SPRN_MMCR0),
+		       "i" (MMCR0_PMC2_LOADMISSTIME),
+		       "i" (SPRN_PMC2),  "r" (0) );
+	}
+
+	if ( !strncmp( buffer, "itlb", 4) )
+	{
+		/* setup mmcr0 and clear the correct pmc */
+	       asm volatile(
+		       "mfspr %0,%1\n\t"     /* get current mccr0 */
+		       "rlwinm %0,%0,0,0,31-6\n\t"  /* clear bits [26-31] */
+		       "ori   %0,%0,%2 \n\t" /* or in mmcr0 settings */
+		       "mtspr %1,%0 \n\t"    /* set new mccr0 */
+		       "mtspr %3,%4 \n\t"    /* reset the pmc */
+		       : "=r" (tmp)
+		       : "i" (SPRN_MMCR0), "i" (MMCR0_PMC2_ITLB),
+		       "i" (SPRN_PMC2),  "r" (0) );
+	}
+
+	if ( !strncmp( buffer, "dc miss", 7) )
+	{
+		/* setup mmcr0 and clear the correct pmc */
+	       asm volatile(
+		       "mfspr %0,%1\n\t"     /* get current mccr0 */
+		       "rlwinm %0,%0,0,0,31-6\n\t"  /* clear bits [26-31] */
+		       "ori   %0,%0,%2 \n\t" /* or in mmcr0 settings */
+		       "mtspr %1,%0 \n\t"    /* set new mccr0 */
+		       "mtspr %3,%4 \n\t"    /* reset the pmc */
+		       : "=r" (tmp)
+		       : "i" (SPRN_MMCR0), "i" (MMCR0_PMC2_DCACHEMISS),
+		       "i" (SPRN_PMC2),  "r" (0) );
+	}
+
+	return count;
+#else /* CONFIG_PPC_STD_MMU */
+	return 0;
+#endif /* CONFIG_PPC_STD_MMU */
+}
+
+int proc_dol2crvec(ctl_table *table, int write, struct file *filp,
+		  void __user *buffer_arg, size_t *lenp, loff_t *ppos)
+{
+	int vleft, first=1, len, left, val;
+	char __user *buffer = (char __user *) buffer_arg;
+	#define TMPBUFLEN 256
+	char buf[TMPBUFLEN], *p;
+	static const char *sizestrings[4] = {
+		"2MB", "256KB", "512KB", "1MB"
+	};
+	static const char *clockstrings[8] = {
+		"clock disabled", "+1 clock", "+1.5 clock", "reserved(3)",
+		"+2 clock", "+2.5 clock", "+3 clock", "reserved(7)"
+	};
+	static const char *typestrings[4] = {
+		"flow-through burst SRAM", "reserved SRAM",
+		"pipelined burst SRAM", "pipelined late-write SRAM"
+	};
+	static const char *holdstrings[4] = {
+		"0.5", "1.0", "(reserved2)", "(reserved3)"
+	};
+
+	if (!cpu_has_feature(CPU_FTR_L2CR))
+		return -EFAULT;
+
+	if ( /*!table->maxlen ||*/ (*ppos && !write)) {
+		*lenp = 0;
+		return 0;
+	}
+
+	vleft = table->maxlen / sizeof(int);
+	left = *lenp;
+
+	for (; left /*&& vleft--*/; first=0) {
+		if (write) {
+			while (left) {
+				char c;
+				if(get_user(c, buffer))
+					return -EFAULT;
+				if (!isspace(c))
+					break;
+				left--;
+				buffer++;
+			}
+			if (!left)
+				break;
+			len = left;
+			if (len > TMPBUFLEN-1)
+				len = TMPBUFLEN-1;
+			if(copy_from_user(buf, buffer, len))
+				return -EFAULT;
+			buf[len] = 0;
+			p = buf;
+			if (*p < '0' || *p > '9')
+				break;
+			val = simple_strtoul(p, &p, 0);
+			len = p-buf;
+			if ((len < left) && *p && !isspace(*p))
+				break;
+			buffer += len;
+			left -= len;
+			_set_L2CR(val);
+		} else {
+			p = buf;
+			if (!first)
+				*p++ = '\t';
+			val = _get_L2CR();
+			p += sprintf(p, "0x%08x: ", val);
+			p += sprintf(p, " %s", (val >> 31) & 1 ? "enabled" :
+				     	"disabled");
+			p += sprintf(p, ", %sparity", (val>>30)&1 ? "" : "no ");
+			p += sprintf(p, ", %s", sizestrings[(val >> 28) & 3]);
+			p += sprintf(p, ", %s", clockstrings[(val >> 25) & 7]);
+			p += sprintf(p, ", %s", typestrings[(val >> 23) & 2]);
+			p += sprintf(p, "%s", (val>>22)&1 ? ", data only" : "");
+			p += sprintf(p, "%s", (val>>20)&1 ? ", ZZ enabled": "");
+			p += sprintf(p, ", %s", (val>>19)&1 ? "write-through" :
+					"copy-back");
+			p += sprintf(p, "%s", (val>>18)&1 ? ", testing" : "");
+			p += sprintf(p, ", %sns hold",holdstrings[(val>>16)&3]);
+			p += sprintf(p, "%s", (val>>15)&1 ? ", DLL slow" : "");
+			p += sprintf(p, "%s", (val>>14)&1 ? ", diff clock" :"");
+			p += sprintf(p, "%s", (val>>13)&1 ? ", DLL bypass" :"");
+
+			p += sprintf(p,"\n");
+
+			len = strlen(buf);
+			if (len > left)
+				len = left;
+			if (copy_to_user(buffer, buf, len))
+				return -EFAULT;
+			left -= len;
+			buffer += len;
+			break;
+		}
+	}
+
+	if (!write && !first && left) {
+		if(put_user('\n', (char __user *) buffer))
+			return -EFAULT;
+		left--, buffer++;
+	}
+	if (write) {
+		char __user *s = (char __user *) buffer;
+		while (left) {
+			char c;
+			if(get_user(c, s++))
+				return -EFAULT;
+			if (!isspace(c))
+				break;
+			left--;
+		}
+	}
+	if (write && first)
+		return -EINVAL;
+	*lenp -= left;
+	*ppos += *lenp;
+	return 0;
+}
+
+#ifdef CONFIG_SYSCTL
+/*
+ * Register our sysctl.
+ */
+static ctl_table htab_ctl_table[]={
+	{
+		.ctl_name	= KERN_PPC_L2CR,
+		.procname	= "l2cr",
+		.mode		= 0644,
+		.proc_handler	= &proc_dol2crvec,
+	},
+	{ 0, },
+};
+static ctl_table htab_sysctl_root[] = {
+	{ 1, "kernel", NULL, 0, 0755, htab_ctl_table, },
+ 	{ 0,},
+};
+
+static int __init
+register_ppc_htab_sysctl(void)
+{
+	register_sysctl_table(htab_sysctl_root, 0);
+
+	return 0;
+}
+
+__initcall(register_ppc_htab_sysctl);
+#endif
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
new file mode 100644
index 00000000000..2ccb58fe4fc
--- /dev/null
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -0,0 +1,350 @@
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/threads.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
+#include <linux/elfcore.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/vt_kern.h>
+#include <linux/nvram.h>
+#include <linux/console.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/pm.h>
+#include <linux/bitops.h>
+
+#include <asm/page.h>
+#include <asm/semaphore.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/ide.h>
+#include <asm/atomic.h>
+#include <asm/checksum.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <linux/adb.h>
+#include <linux/cuda.h>
+#include <linux/pmu.h>
+#include <asm/prom.h>
+#include <asm/system.h>
+#include <asm/pci-bridge.h>
+#include <asm/irq.h>
+#include <asm/pmac_feature.h>
+#include <asm/dma.h>
+#include <asm/machdep.h>
+#include <asm/hw_irq.h>
+#include <asm/nvram.h>
+#include <asm/mmu_context.h>
+#include <asm/backlight.h>
+#include <asm/time.h>
+#include <asm/cputable.h>
+#include <asm/btext.h>
+#include <asm/div64.h>
+#include <asm/xmon.h>
+
+#ifdef  CONFIG_8xx
+#include <asm/commproc.h>
+#endif
+
+/* Tell string.h we don't want memcpy etc. as cpp defines */
+#define EXPORT_SYMTAB_STROPS
+
+extern void transfer_to_handler(void);
+extern void do_syscall_trace(void);
+extern void do_IRQ(struct pt_regs *regs);
+extern void MachineCheckException(struct pt_regs *regs);
+extern void AlignmentException(struct pt_regs *regs);
+extern void ProgramCheckException(struct pt_regs *regs);
+extern void SingleStepException(struct pt_regs *regs);
+extern int do_signal(sigset_t *, struct pt_regs *);
+extern int pmac_newworld;
+extern int sys_sigreturn(struct pt_regs *regs);
+
+long long __ashrdi3(long long, int);
+long long __ashldi3(long long, int);
+long long __lshrdi3(long long, int);
+
+extern unsigned long mm_ptov (unsigned long paddr);
+
+EXPORT_SYMBOL(clear_pages);
+EXPORT_SYMBOL(clear_user_page);
+EXPORT_SYMBOL(do_signal);
+EXPORT_SYMBOL(do_syscall_trace);
+EXPORT_SYMBOL(transfer_to_handler);
+EXPORT_SYMBOL(do_IRQ);
+EXPORT_SYMBOL(MachineCheckException);
+EXPORT_SYMBOL(AlignmentException);
+EXPORT_SYMBOL(ProgramCheckException);
+EXPORT_SYMBOL(SingleStepException);
+EXPORT_SYMBOL(sys_sigreturn);
+EXPORT_SYMBOL(ppc_n_lost_interrupts);
+EXPORT_SYMBOL(ppc_lost_interrupts);
+
+EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
+EXPORT_SYMBOL(DMA_MODE_READ);
+EXPORT_SYMBOL(DMA_MODE_WRITE);
+#if defined(CONFIG_PPC_PREP)
+EXPORT_SYMBOL(_prep_type);
+EXPORT_SYMBOL(ucSystemType);
+#endif
+
+#if !defined(__INLINE_BITOPS)
+EXPORT_SYMBOL(set_bit);
+EXPORT_SYMBOL(clear_bit);
+EXPORT_SYMBOL(change_bit);
+EXPORT_SYMBOL(test_and_set_bit);
+EXPORT_SYMBOL(test_and_clear_bit);
+EXPORT_SYMBOL(test_and_change_bit);
+#endif /* __INLINE_BITOPS */
+
+EXPORT_SYMBOL(strcpy);
+EXPORT_SYMBOL(strncpy);
+EXPORT_SYMBOL(strcat);
+EXPORT_SYMBOL(strncat);
+EXPORT_SYMBOL(strchr);
+EXPORT_SYMBOL(strrchr);
+EXPORT_SYMBOL(strpbrk);
+EXPORT_SYMBOL(strstr);
+EXPORT_SYMBOL(strlen);
+EXPORT_SYMBOL(strnlen);
+EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strncmp);
+EXPORT_SYMBOL(strcasecmp);
+EXPORT_SYMBOL(__div64_32);
+
+EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_generic);
+EXPORT_SYMBOL(ip_fast_csum);
+EXPORT_SYMBOL(csum_tcpudp_magic);
+
+EXPORT_SYMBOL(__copy_tofrom_user);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+EXPORT_SYMBOL(__strnlen_user);
+
+/*
+EXPORT_SYMBOL(inb);
+EXPORT_SYMBOL(inw);
+EXPORT_SYMBOL(inl);
+EXPORT_SYMBOL(outb);
+EXPORT_SYMBOL(outw);
+EXPORT_SYMBOL(outl);
+EXPORT_SYMBOL(outsl);*/
+
+EXPORT_SYMBOL(_insb);
+EXPORT_SYMBOL(_outsb);
+EXPORT_SYMBOL(_insw);
+EXPORT_SYMBOL(_outsw);
+EXPORT_SYMBOL(_insl);
+EXPORT_SYMBOL(_outsl);
+EXPORT_SYMBOL(_insw_ns);
+EXPORT_SYMBOL(_outsw_ns);
+EXPORT_SYMBOL(_insl_ns);
+EXPORT_SYMBOL(_outsl_ns);
+EXPORT_SYMBOL(iopa);
+EXPORT_SYMBOL(mm_ptov);
+EXPORT_SYMBOL(ioremap);
+#ifdef CONFIG_44x
+EXPORT_SYMBOL(ioremap64);
+#endif
+EXPORT_SYMBOL(__ioremap);
+EXPORT_SYMBOL(iounmap);
+EXPORT_SYMBOL(ioremap_bot);	/* aka VMALLOC_END */
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+EXPORT_SYMBOL(ppc_ide_md);
+#endif
+
+#ifdef CONFIG_PCI
+EXPORT_SYMBOL(isa_io_base);
+EXPORT_SYMBOL(isa_mem_base);
+EXPORT_SYMBOL(pci_dram_offset);
+EXPORT_SYMBOL(pci_alloc_consistent);
+EXPORT_SYMBOL(pci_free_consistent);
+EXPORT_SYMBOL(pci_bus_io_base);
+EXPORT_SYMBOL(pci_bus_io_base_phys);
+EXPORT_SYMBOL(pci_bus_mem_base_phys);
+EXPORT_SYMBOL(pci_bus_to_hose);
+EXPORT_SYMBOL(pci_resource_to_bus);
+EXPORT_SYMBOL(pci_phys_to_bus);
+EXPORT_SYMBOL(pci_bus_to_phys);
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+EXPORT_SYMBOL(flush_dcache_all);
+#endif
+
+EXPORT_SYMBOL(start_thread);
+EXPORT_SYMBOL(kernel_thread);
+
+EXPORT_SYMBOL(flush_instruction_cache);
+EXPORT_SYMBOL(giveup_fpu);
+EXPORT_SYMBOL(flush_icache_range);
+EXPORT_SYMBOL(flush_dcache_range);
+EXPORT_SYMBOL(flush_icache_user_range);
+EXPORT_SYMBOL(flush_dcache_page);
+EXPORT_SYMBOL(flush_tlb_kernel_range);
+EXPORT_SYMBOL(flush_tlb_page);
+EXPORT_SYMBOL(_tlbie);
+#ifdef CONFIG_ALTIVEC
+EXPORT_SYMBOL(last_task_used_altivec);
+EXPORT_SYMBOL(giveup_altivec);
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+EXPORT_SYMBOL(last_task_used_spe);
+EXPORT_SYMBOL(giveup_spe);
+#endif /* CONFIG_SPE */
+#ifdef CONFIG_SMP
+EXPORT_SYMBOL(smp_call_function);
+EXPORT_SYMBOL(smp_hw_index);
+#endif
+
+EXPORT_SYMBOL(ppc_md);
+
+#ifdef CONFIG_ADB
+EXPORT_SYMBOL(adb_request);
+EXPORT_SYMBOL(adb_register);
+EXPORT_SYMBOL(adb_unregister);
+EXPORT_SYMBOL(adb_poll);
+EXPORT_SYMBOL(adb_try_handler_change);
+#endif /* CONFIG_ADB */
+#ifdef CONFIG_ADB_CUDA
+EXPORT_SYMBOL(cuda_request);
+EXPORT_SYMBOL(cuda_poll);
+#endif /* CONFIG_ADB_CUDA */
+#ifdef CONFIG_PPC_MULTIPLATFORM
+EXPORT_SYMBOL(_machine);
+#endif
+#ifdef CONFIG_PPC_PMAC
+EXPORT_SYMBOL(sys_ctrler);
+EXPORT_SYMBOL(pmac_newworld);
+#endif
+#ifdef CONFIG_PPC_OF
+EXPORT_SYMBOL(find_devices);
+EXPORT_SYMBOL(find_type_devices);
+EXPORT_SYMBOL(find_compatible_devices);
+EXPORT_SYMBOL(find_path_device);
+EXPORT_SYMBOL(device_is_compatible);
+EXPORT_SYMBOL(machine_is_compatible);
+EXPORT_SYMBOL(find_all_nodes);
+EXPORT_SYMBOL(get_property);
+EXPORT_SYMBOL(request_OF_resource);
+EXPORT_SYMBOL(release_OF_resource);
+EXPORT_SYMBOL(pci_busdev_to_OF_node);
+EXPORT_SYMBOL(pci_device_to_OF_node);
+EXPORT_SYMBOL(pci_device_from_OF_node);
+EXPORT_SYMBOL(of_find_node_by_name);
+EXPORT_SYMBOL(of_find_node_by_type);
+EXPORT_SYMBOL(of_find_compatible_node);
+EXPORT_SYMBOL(of_find_node_by_path);
+EXPORT_SYMBOL(of_find_all_nodes);
+EXPORT_SYMBOL(of_get_parent);
+EXPORT_SYMBOL(of_get_next_child);
+EXPORT_SYMBOL(of_node_get);
+EXPORT_SYMBOL(of_node_put);
+#endif /* CONFIG_PPC_OF */
+#if defined(CONFIG_BOOTX_TEXT)
+EXPORT_SYMBOL(btext_update_display);
+#endif
+#if defined(CONFIG_SCSI) && defined(CONFIG_PPC_PMAC)
+EXPORT_SYMBOL(note_scsi_host);
+#endif
+#ifdef CONFIG_VT
+EXPORT_SYMBOL(kd_mksound);
+#endif
+EXPORT_SYMBOL(to_tm);
+
+EXPORT_SYMBOL(pm_power_off);
+
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memscan);
+EXPORT_SYMBOL(memcmp);
+EXPORT_SYMBOL(memchr);
+
+#if defined(CONFIG_FB_VGA16_MODULE)
+EXPORT_SYMBOL(screen_info);
+#endif
+
+EXPORT_SYMBOL(__delay);
+#ifndef INLINE_IRQS
+EXPORT_SYMBOL(local_irq_enable);
+EXPORT_SYMBOL(local_irq_enable_end);
+EXPORT_SYMBOL(local_irq_disable);
+EXPORT_SYMBOL(local_irq_disable_end);
+EXPORT_SYMBOL(local_save_flags_ptr);
+EXPORT_SYMBOL(local_save_flags_ptr_end);
+EXPORT_SYMBOL(local_irq_restore);
+EXPORT_SYMBOL(local_irq_restore_end);
+#endif
+EXPORT_SYMBOL(timer_interrupt);
+EXPORT_SYMBOL(irq_desc);
+EXPORT_SYMBOL(tb_ticks_per_jiffy);
+EXPORT_SYMBOL(get_wchan);
+EXPORT_SYMBOL(console_drivers);
+#ifdef CONFIG_XMON
+EXPORT_SYMBOL(xmon);
+EXPORT_SYMBOL(xmon_printf);
+#endif
+EXPORT_SYMBOL(__up);
+EXPORT_SYMBOL(__down);
+EXPORT_SYMBOL(__down_interruptible);
+
+#if defined(CONFIG_KGDB) || defined(CONFIG_XMON)
+extern void (*debugger)(struct pt_regs *regs);
+extern int (*debugger_bpt)(struct pt_regs *regs);
+extern int (*debugger_sstep)(struct pt_regs *regs);
+extern int (*debugger_iabr_match)(struct pt_regs *regs);
+extern int (*debugger_dabr_match)(struct pt_regs *regs);
+extern void (*debugger_fault_handler)(struct pt_regs *regs);
+
+EXPORT_SYMBOL(debugger);
+EXPORT_SYMBOL(debugger_bpt);
+EXPORT_SYMBOL(debugger_sstep);
+EXPORT_SYMBOL(debugger_iabr_match);
+EXPORT_SYMBOL(debugger_dabr_match);
+EXPORT_SYMBOL(debugger_fault_handler);
+#endif
+
+#ifdef  CONFIG_8xx
+EXPORT_SYMBOL(cpm_install_handler);
+EXPORT_SYMBOL(cpm_free_handler);
+#endif /* CONFIG_8xx */
+#if defined(CONFIG_8xx) || defined(CONFIG_40x) || defined(CONFIG_85xx) ||\
+	defined(CONFIG_83xx)
+EXPORT_SYMBOL(__res);
+#endif
+
+EXPORT_SYMBOL(next_mmu_context);
+EXPORT_SYMBOL(set_context);
+EXPORT_SYMBOL(handle_mm_fault); /* For MOL */
+EXPORT_SYMBOL(disarm_decr);
+#ifdef CONFIG_PPC_STD_MMU
+extern long mol_trampoline;
+EXPORT_SYMBOL(mol_trampoline); /* For MOL */
+EXPORT_SYMBOL(flush_hash_pages); /* For MOL */
+#ifdef CONFIG_SMP
+extern int mmu_hash_lock;
+EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
+#endif /* CONFIG_SMP */
+extern long *intercept_table;
+EXPORT_SYMBOL(intercept_table);
+#endif /* CONFIG_PPC_STD_MMU */
+EXPORT_SYMBOL(cur_cpu_spec);
+#ifdef CONFIG_PPC_PMAC
+extern unsigned long agp_special_page;
+EXPORT_SYMBOL(agp_special_page);
+#endif
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+EXPORT_SYMBOL(__mtdcr);
+EXPORT_SYMBOL(__mfdcr);
+#endif
diff --git a/arch/ppc/kernel/process.c b/arch/ppc/kernel/process.c
new file mode 100644
index 00000000000..82de66e4db6
--- /dev/null
+++ b/arch/ppc/kernel/process.c
@@ -0,0 +1,781 @@
+/*
+ *  arch/ppc/kernel/process.c
+ *
+ *  Derived from "arch/i386/kernel/process.c"
+ *    Copyright (C) 1995  Linus Torvalds
+ *
+ *  Updated and modified by Cort Dougan (cort@cs.nmt.edu) and
+ *  Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/elf.h>
+#include <linux/init.h>
+#include <linux/prctl.h>
+#include <linux/init_task.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <linux/mqueue.h>
+#include <linux/hardirq.h>
+
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/prom.h>
+
+extern unsigned long _get_SP(void);
+
+struct task_struct *last_task_used_math = NULL;
+struct task_struct *last_task_used_altivec = NULL;
+struct task_struct *last_task_used_spe = NULL;
+
+static struct fs_struct init_fs = INIT_FS;
+static struct files_struct init_files = INIT_FILES;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+EXPORT_SYMBOL(init_mm);
+
+/* this is 8kB-aligned so we can get to the thread_info struct
+   at the base of it from the stack pointer with 1 integer instruction. */
+union thread_union init_thread_union
+	__attribute__((__section__(".data.init_task"))) =
+{ INIT_THREAD_INFO(init_task) };
+
+/* initial task structure */
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
+
+/* only used to get secondary processor up */
+struct task_struct *current_set[NR_CPUS] = {&init_task, };
+
+#undef SHOW_TASK_SWITCHES
+#undef CHECK_STACK
+
+#if defined(CHECK_STACK)
+unsigned long
+kernel_stack_top(struct task_struct *tsk)
+{
+	return ((unsigned long)tsk) + sizeof(union task_union);
+}
+
+unsigned long
+task_top(struct task_struct *tsk)
+{
+	return ((unsigned long)tsk) + sizeof(struct thread_info);
+}
+
+/* check to make sure the kernel stack is healthy */
+int check_stack(struct task_struct *tsk)
+{
+	unsigned long stack_top = kernel_stack_top(tsk);
+	unsigned long tsk_top = task_top(tsk);
+	int ret = 0;
+
+#if 0
+	/* check thread magic */
+	if ( tsk->thread.magic != THREAD_MAGIC )
+	{
+		ret |= 1;
+		printk("thread.magic bad: %08x\n", tsk->thread.magic);
+	}
+#endif
+
+	if ( !tsk )
+		printk("check_stack(): tsk bad tsk %p\n",tsk);
+
+	/* check if stored ksp is bad */
+	if ( (tsk->thread.ksp > stack_top) || (tsk->thread.ksp < tsk_top) )
+	{
+		printk("stack out of bounds: %s/%d\n"
+		       " tsk_top %08lx ksp %08lx stack_top %08lx\n",
+		       tsk->comm,tsk->pid,
+		       tsk_top, tsk->thread.ksp, stack_top);
+		ret |= 2;
+	}
+
+	/* check if stack ptr RIGHT NOW is bad */
+	if ( (tsk == current) && ((_get_SP() > stack_top ) || (_get_SP() < tsk_top)) )
+	{
+		printk("current stack ptr out of bounds: %s/%d\n"
+		       " tsk_top %08lx sp %08lx stack_top %08lx\n",
+		       current->comm,current->pid,
+		       tsk_top, _get_SP(), stack_top);
+		ret |= 4;
+	}
+
+#if 0
+	/* check amount of free stack */
+	for ( i = (unsigned long *)task_top(tsk) ; i < kernel_stack_top(tsk) ; i++ )
+	{
+		if ( !i )
+			printk("check_stack(): i = %p\n", i);
+		if ( *i != 0 )
+		{
+			/* only notify if it's less than 900 bytes */
+			if ( (i - (unsigned long *)task_top(tsk))  < 900 )
+				printk("%d bytes free on stack\n",
+				       i - task_top(tsk));
+			break;
+		}
+	}
+#endif
+
+	if (ret)
+	{
+		panic("bad kernel stack");
+	}
+	return(ret);
+}
+#endif /* defined(CHECK_STACK) */
+
+#ifdef CONFIG_ALTIVEC
+int
+dump_altivec(struct pt_regs *regs, elf_vrregset_t *vrregs)
+{
+	if (regs->msr & MSR_VEC)
+		giveup_altivec(current);
+	memcpy(vrregs, &current->thread.vr[0], sizeof(*vrregs));
+	return 1;
+}
+
+void
+enable_kernel_altivec(void)
+{
+	WARN_ON(preemptible());
+
+#ifdef CONFIG_SMP
+	if (current->thread.regs && (current->thread.regs->msr & MSR_VEC))
+		giveup_altivec(current);
+	else
+		giveup_altivec(NULL);	/* just enable AltiVec for kernel - force */
+#else
+	giveup_altivec(last_task_used_altivec);
+#endif /* __SMP __ */
+}
+EXPORT_SYMBOL(enable_kernel_altivec);
+#endif /* CONFIG_ALTIVEC */
+
+#ifdef CONFIG_SPE
+int
+dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs)
+{
+	if (regs->msr & MSR_SPE)
+		giveup_spe(current);
+	/* We copy u32 evr[32] + u64 acc + u32 spefscr -> 35 */
+	memcpy(evrregs, &current->thread.evr[0], sizeof(u32) * 35);
+	return 1;
+}
+
+void
+enable_kernel_spe(void)
+{
+	WARN_ON(preemptible());
+
+#ifdef CONFIG_SMP
+	if (current->thread.regs && (current->thread.regs->msr & MSR_SPE))
+		giveup_spe(current);
+	else
+		giveup_spe(NULL);	/* just enable SPE for kernel - force */
+#else
+	giveup_spe(last_task_used_spe);
+#endif /* __SMP __ */
+}
+EXPORT_SYMBOL(enable_kernel_spe);
+#endif /* CONFIG_SPE */
+
+void
+enable_kernel_fp(void)
+{
+	WARN_ON(preemptible());
+
+#ifdef CONFIG_SMP
+	if (current->thread.regs && (current->thread.regs->msr & MSR_FP))
+		giveup_fpu(current);
+	else
+		giveup_fpu(NULL);	/* just enables FP for kernel */
+#else
+	giveup_fpu(last_task_used_math);
+#endif /* CONFIG_SMP */
+}
+EXPORT_SYMBOL(enable_kernel_fp);
+
+int
+dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs)
+{
+	preempt_disable();
+	if (tsk->thread.regs && (tsk->thread.regs->msr & MSR_FP))
+		giveup_fpu(tsk);
+	preempt_enable();
+	memcpy(fpregs, &tsk->thread.fpr[0], sizeof(*fpregs));
+	return 1;
+}
+
+struct task_struct *__switch_to(struct task_struct *prev,
+	struct task_struct *new)
+{
+	struct thread_struct *new_thread, *old_thread;
+	unsigned long s;
+	struct task_struct *last;
+
+	local_irq_save(s);
+#ifdef CHECK_STACK
+	check_stack(prev);
+	check_stack(new);
+#endif
+
+#ifdef CONFIG_SMP
+	/* avoid complexity of lazy save/restore of fpu
+	 * by just saving it every time we switch out if
+	 * this task used the fpu during the last quantum.
+	 *
+	 * If it tries to use the fpu again, it'll trap and
+	 * reload its fp regs.  So we don't have to do a restore
+	 * every switch, just a save.
+	 *  -- Cort
+	 */
+	if (prev->thread.regs && (prev->thread.regs->msr & MSR_FP))
+		giveup_fpu(prev);
+#ifdef CONFIG_ALTIVEC
+	/*
+	 * If the previous thread used altivec in the last quantum
+	 * (thus changing altivec regs) then save them.
+	 * We used to check the VRSAVE register but not all apps
+	 * set it, so we don't rely on it now (and in fact we need
+	 * to save & restore VSCR even if VRSAVE == 0).  -- paulus
+	 *
+	 * On SMP we always save/restore altivec regs just to avoid the
+	 * complexity of changing processors.
+	 *  -- Cort
+	 */
+	if ((prev->thread.regs && (prev->thread.regs->msr & MSR_VEC)))
+		giveup_altivec(prev);
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+	/*
+	 * If the previous thread used spe in the last quantum
+	 * (thus changing spe regs) then save them.
+	 *
+	 * On SMP we always save/restore spe regs just to avoid the
+	 * complexity of changing processors.
+	 */
+	if ((prev->thread.regs && (prev->thread.regs->msr & MSR_SPE)))
+		giveup_spe(prev);
+#endif /* CONFIG_SPE */
+#endif /* CONFIG_SMP */
+
+	/* Avoid the trap.  On smp this this never happens since
+	 * we don't set last_task_used_altivec -- Cort
+	 */
+	if (new->thread.regs && last_task_used_altivec == new)
+		new->thread.regs->msr |= MSR_VEC;
+#ifdef CONFIG_SPE
+	/* Avoid the trap.  On smp this this never happens since
+	 * we don't set last_task_used_spe
+	 */
+	if (new->thread.regs && last_task_used_spe == new)
+		new->thread.regs->msr |= MSR_SPE;
+#endif /* CONFIG_SPE */
+	new_thread = &new->thread;
+	old_thread = &current->thread;
+	last = _switch(old_thread, new_thread);
+	local_irq_restore(s);
+	return last;
+}
+
+void show_regs(struct pt_regs * regs)
+{
+	int i, trap;
+
+	printk("NIP: %08lX LR: %08lX SP: %08lX REGS: %p TRAP: %04lx    %s\n",
+	       regs->nip, regs->link, regs->gpr[1], regs, regs->trap,
+	       print_tainted());
+	printk("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+	       regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+	       regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+	       regs->msr&MSR_IR ? 1 : 0,
+	       regs->msr&MSR_DR ? 1 : 0);
+	trap = TRAP(regs);
+	if (trap == 0x300 || trap == 0x600)
+		printk("DAR: %08lX, DSISR: %08lX\n", regs->dar, regs->dsisr);
+	printk("TASK = %p[%d] '%s' THREAD: %p\n",
+	       current, current->pid, current->comm, current->thread_info);
+	printk("Last syscall: %ld ", current->thread.last_syscall);
+
+#ifdef CONFIG_SMP
+	printk(" CPU: %d", smp_processor_id());
+#endif /* CONFIG_SMP */
+
+	for (i = 0;  i < 32;  i++) {
+		long r;
+		if ((i % 8) == 0)
+			printk("\n" KERN_INFO "GPR%02d: ", i);
+		if (__get_user(r, &regs->gpr[i]))
+			break;
+		printk("%08lX ", r);
+		if (i == 12 && !FULL_REGS(regs))
+			break;
+	}
+	printk("\n");
+#ifdef CONFIG_KALLSYMS
+	/*
+	 * Lookup NIP late so we have the best change of getting the
+	 * above info out without failing
+	 */
+	printk("NIP [%08lx] ", regs->nip);
+	print_symbol("%s\n", regs->nip);
+	printk("LR [%08lx] ", regs->link);
+	print_symbol("%s\n", regs->link);
+#endif
+	show_stack(current, (unsigned long *) regs->gpr[1]);
+}
+
+void exit_thread(void)
+{
+	if (last_task_used_math == current)
+		last_task_used_math = NULL;
+	if (last_task_used_altivec == current)
+		last_task_used_altivec = NULL;
+#ifdef CONFIG_SPE
+	if (last_task_used_spe == current)
+		last_task_used_spe = NULL;
+#endif
+}
+
+void flush_thread(void)
+{
+	if (last_task_used_math == current)
+		last_task_used_math = NULL;
+	if (last_task_used_altivec == current)
+		last_task_used_altivec = NULL;
+#ifdef CONFIG_SPE
+	if (last_task_used_spe == current)
+		last_task_used_spe = NULL;
+#endif
+}
+
+void
+release_thread(struct task_struct *t)
+{
+}
+
+/*
+ * This gets called before we allocate a new thread and copy
+ * the current task into it.
+ */
+void prepare_to_copy(struct task_struct *tsk)
+{
+	struct pt_regs *regs = tsk->thread.regs;
+
+	if (regs == NULL)
+		return;
+	preempt_disable();
+	if (regs->msr & MSR_FP)
+		giveup_fpu(current);
+#ifdef CONFIG_ALTIVEC
+	if (regs->msr & MSR_VEC)
+		giveup_altivec(current);
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+	if (regs->msr & MSR_SPE)
+		giveup_spe(current);
+#endif /* CONFIG_SPE */
+	preempt_enable();
+}
+
+/*
+ * Copy a thread..
+ */
+int
+copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+	    unsigned long unused,
+	    struct task_struct *p, struct pt_regs *regs)
+{
+	struct pt_regs *childregs, *kregs;
+	extern void ret_from_fork(void);
+	unsigned long sp = (unsigned long)p->thread_info + THREAD_SIZE;
+	unsigned long childframe;
+
+	CHECK_FULL_REGS(regs);
+	/* Copy registers */
+	sp -= sizeof(struct pt_regs);
+	childregs = (struct pt_regs *) sp;
+	*childregs = *regs;
+	if ((childregs->msr & MSR_PR) == 0) {
+		/* for kernel thread, set `current' and stackptr in new task */
+		childregs->gpr[1] = sp + sizeof(struct pt_regs);
+		childregs->gpr[2] = (unsigned long) p;
+		p->thread.regs = NULL;	/* no user register state */
+	} else {
+		childregs->gpr[1] = usp;
+		p->thread.regs = childregs;
+		if (clone_flags & CLONE_SETTLS)
+			childregs->gpr[2] = childregs->gpr[6];
+	}
+	childregs->gpr[3] = 0;  /* Result from fork() */
+	sp -= STACK_FRAME_OVERHEAD;
+	childframe = sp;
+
+	/*
+	 * The way this works is that at some point in the future
+	 * some task will call _switch to switch to the new task.
+	 * That will pop off the stack frame created below and start
+	 * the new task running at ret_from_fork.  The new task will
+	 * do some house keeping and then return from the fork or clone
+	 * system call, using the stack frame created above.
+	 */
+	sp -= sizeof(struct pt_regs);
+	kregs = (struct pt_regs *) sp;
+	sp -= STACK_FRAME_OVERHEAD;
+	p->thread.ksp = sp;
+	kregs->nip = (unsigned long)ret_from_fork;
+
+	p->thread.last_syscall = -1;
+
+	return 0;
+}
+
+/*
+ * Set up a thread for executing a new program
+ */
+void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp)
+{
+	set_fs(USER_DS);
+	memset(regs->gpr, 0, sizeof(regs->gpr));
+	regs->ctr = 0;
+	regs->link = 0;
+	regs->xer = 0;
+	regs->ccr = 0;
+	regs->mq = 0;
+	regs->nip = nip;
+	regs->gpr[1] = sp;
+	regs->msr = MSR_USER;
+	if (last_task_used_math == current)
+		last_task_used_math = NULL;
+	if (last_task_used_altivec == current)
+		last_task_used_altivec = NULL;
+#ifdef CONFIG_SPE
+	if (last_task_used_spe == current)
+		last_task_used_spe = NULL;
+#endif
+	memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
+	current->thread.fpscr = 0;
+#ifdef CONFIG_ALTIVEC
+	memset(current->thread.vr, 0, sizeof(current->thread.vr));
+	memset(&current->thread.vscr, 0, sizeof(current->thread.vscr));
+	current->thread.vrsave = 0;
+	current->thread.used_vr = 0;
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+	memset(current->thread.evr, 0, sizeof(current->thread.evr));
+	current->thread.acc = 0;
+	current->thread.spefscr = 0;
+	current->thread.used_spe = 0;
+#endif /* CONFIG_SPE */
+}
+
+#define PR_FP_ALL_EXCEPT (PR_FP_EXC_DIV | PR_FP_EXC_OVF | PR_FP_EXC_UND \
+		| PR_FP_EXC_RES | PR_FP_EXC_INV)
+
+int set_fpexc_mode(struct task_struct *tsk, unsigned int val)
+{
+	struct pt_regs *regs = tsk->thread.regs;
+
+	/* This is a bit hairy.  If we are an SPE enabled  processor
+	 * (have embedded fp) we store the IEEE exception enable flags in
+	 * fpexc_mode.  fpexc_mode is also used for setting FP exception
+	 * mode (asyn, precise, disabled) for 'Classic' FP. */
+	if (val & PR_FP_EXC_SW_ENABLE) {
+#ifdef CONFIG_SPE
+		tsk->thread.fpexc_mode = val &
+			(PR_FP_EXC_SW_ENABLE | PR_FP_ALL_EXCEPT);
+#else
+		return -EINVAL;
+#endif
+	} else {
+		/* on a CONFIG_SPE this does not hurt us.  The bits that
+		 * __pack_fe01 use do not overlap with bits used for
+		 * PR_FP_EXC_SW_ENABLE.  Additionally, the MSR[FE0,FE1] bits
+		 * on CONFIG_SPE implementations are reserved so writing to
+		 * them does not change anything */
+		if (val > PR_FP_EXC_PRECISE)
+			return -EINVAL;
+		tsk->thread.fpexc_mode = __pack_fe01(val);
+		if (regs != NULL && (regs->msr & MSR_FP) != 0)
+			regs->msr = (regs->msr & ~(MSR_FE0|MSR_FE1))
+				| tsk->thread.fpexc_mode;
+	}
+	return 0;
+}
+
+int get_fpexc_mode(struct task_struct *tsk, unsigned long adr)
+{
+	unsigned int val;
+
+	if (tsk->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE)
+#ifdef CONFIG_SPE
+		val = tsk->thread.fpexc_mode;
+#else
+		return -EINVAL;
+#endif
+	else
+		val = __unpack_fe01(tsk->thread.fpexc_mode);
+	return put_user(val, (unsigned int __user *) adr);
+}
+
+int sys_clone(unsigned long clone_flags, unsigned long usp,
+	      int __user *parent_tidp, void __user *child_threadptr,
+	      int __user *child_tidp, int p6,
+	      struct pt_regs *regs)
+{
+	CHECK_FULL_REGS(regs);
+	if (usp == 0)
+		usp = regs->gpr[1];	/* stack pointer for child */
+ 	return do_fork(clone_flags, usp, regs, 0, parent_tidp, child_tidp);
+}
+
+int sys_fork(int p1, int p2, int p3, int p4, int p5, int p6,
+	     struct pt_regs *regs)
+{
+	CHECK_FULL_REGS(regs);
+	return do_fork(SIGCHLD, regs->gpr[1], regs, 0, NULL, NULL);
+}
+
+int sys_vfork(int p1, int p2, int p3, int p4, int p5, int p6,
+	      struct pt_regs *regs)
+{
+	CHECK_FULL_REGS(regs);
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->gpr[1],
+			regs, 0, NULL, NULL);
+}
+
+int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
+	       unsigned long a3, unsigned long a4, unsigned long a5,
+	       struct pt_regs *regs)
+{
+	int error;
+	char * filename;
+
+	filename = getname((char __user *) a0);
+	error = PTR_ERR(filename);
+	if (IS_ERR(filename))
+		goto out;
+	preempt_disable();
+	if (regs->msr & MSR_FP)
+		giveup_fpu(current);
+#ifdef CONFIG_ALTIVEC
+	if (regs->msr & MSR_VEC)
+		giveup_altivec(current);
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+	if (regs->msr & MSR_SPE)
+		giveup_spe(current);
+#endif /* CONFIG_SPE */
+	preempt_enable();
+	error = do_execve(filename, (char __user *__user *) a1,
+			  (char __user *__user *) a2, regs);
+	if (error == 0) {
+		task_lock(current);
+		current->ptrace &= ~PT_DTRACE;
+		task_unlock(current);
+	}
+	putname(filename);
+out:
+	return error;
+}
+
+void dump_stack(void)
+{
+	show_stack(current, NULL);
+}
+
+EXPORT_SYMBOL(dump_stack);
+
+void show_stack(struct task_struct *tsk, unsigned long *stack)
+{
+	unsigned long sp, stack_top, prev_sp, ret;
+	int count = 0;
+	unsigned long next_exc = 0;
+	struct pt_regs *regs;
+	extern char ret_from_except, ret_from_except_full, ret_from_syscall;
+
+	sp = (unsigned long) stack;
+	if (tsk == NULL)
+		tsk = current;
+	if (sp == 0) {
+		if (tsk == current)
+			asm("mr %0,1" : "=r" (sp));
+		else
+			sp = tsk->thread.ksp;
+	}
+
+	prev_sp = (unsigned long) (tsk->thread_info + 1);
+	stack_top = (unsigned long) tsk->thread_info + THREAD_SIZE;
+	while (count < 16 && sp > prev_sp && sp < stack_top && (sp & 3) == 0) {
+		if (count == 0) {
+			printk("Call trace:");
+#ifdef CONFIG_KALLSYMS
+			printk("\n");
+#endif
+		} else {
+			if (next_exc) {
+				ret = next_exc;
+				next_exc = 0;
+			} else
+				ret = *(unsigned long *)(sp + 4);
+			printk(" [%08lx] ", ret);
+#ifdef CONFIG_KALLSYMS
+			print_symbol("%s", ret);
+			printk("\n");
+#endif
+			if (ret == (unsigned long) &ret_from_except
+			    || ret == (unsigned long) &ret_from_except_full
+			    || ret == (unsigned long) &ret_from_syscall) {
+				/* sp + 16 points to an exception frame */
+				regs = (struct pt_regs *) (sp + 16);
+				if (sp + 16 + sizeof(*regs) <= stack_top)
+					next_exc = regs->nip;
+			}
+		}
+		++count;
+		sp = *(unsigned long *)sp;
+	}
+#ifndef CONFIG_KALLSYMS
+	if (count > 0)
+		printk("\n");
+#endif
+}
+
+#if 0
+/*
+ * Low level print for debugging - Cort
+ */
+int __init ll_printk(const char *fmt, ...)
+{
+        va_list args;
+	char buf[256];
+        int i;
+
+        va_start(args, fmt);
+        i=vsprintf(buf,fmt,args);
+	ll_puts(buf);
+        va_end(args);
+        return i;
+}
+
+int lines = 24, cols = 80;
+int orig_x = 0, orig_y = 0;
+
+void puthex(unsigned long val)
+{
+	unsigned char buf[10];
+	int i;
+	for (i = 7;  i >= 0;  i--)
+	{
+		buf[i] = "0123456789ABCDEF"[val & 0x0F];
+		val >>= 4;
+	}
+	buf[8] = '\0';
+	prom_print(buf);
+}
+
+void __init ll_puts(const char *s)
+{
+	int x,y;
+	char *vidmem = (char *)/*(_ISA_MEM_BASE + 0xB8000) */0xD00B8000;
+	char c;
+	extern int mem_init_done;
+
+	if ( mem_init_done ) /* assume this means we can printk */
+	{
+		printk(s);
+		return;
+	}
+
+#if 0
+	if ( have_of )
+	{
+		prom_print(s);
+		return;
+	}
+#endif
+
+	/*
+	 * can't ll_puts on chrp without openfirmware yet.
+	 * vidmem just needs to be setup for it.
+	 * -- Cort
+	 */
+	if ( _machine != _MACH_prep )
+		return;
+	x = orig_x;
+	y = orig_y;
+
+	while ( ( c = *s++ ) != '\0' ) {
+		if ( c == '\n' ) {
+			x = 0;
+			if ( ++y >= lines ) {
+				/*scroll();*/
+				/*y--;*/
+				y = 0;
+			}
+		} else {
+			vidmem [ ( x + cols * y ) * 2 ] = c;
+			if ( ++x >= cols ) {
+				x = 0;
+				if ( ++y >= lines ) {
+					/*scroll();*/
+					/*y--;*/
+					y = 0;
+				}
+			}
+		}
+	}
+
+	orig_x = x;
+	orig_y = y;
+}
+#endif
+
+unsigned long get_wchan(struct task_struct *p)
+{
+	unsigned long ip, sp;
+	unsigned long stack_page = (unsigned long) p->thread_info;
+	int count = 0;
+	if (!p || p == current || p->state == TASK_RUNNING)
+		return 0;
+	sp = p->thread.ksp;
+	do {
+		sp = *(unsigned long *)sp;
+		if (sp < stack_page || sp >= stack_page + 8188)
+			return 0;
+		if (count > 0) {
+			ip = *(unsigned long *)(sp + 4);
+			if (!in_sched_functions(ip))
+				return ip;
+		}
+	} while (count++ < 16);
+	return 0;
+}
diff --git a/arch/ppc/kernel/ptrace.c b/arch/ppc/kernel/ptrace.c
new file mode 100644
index 00000000000..426b6f7d9de
--- /dev/null
+++ b/arch/ppc/kernel/ptrace.c
@@ -0,0 +1,474 @@
+/*
+ *  arch/ppc/kernel/ptrace.c
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Derived from "arch/m68k/kernel/ptrace.c"
+ *  Copyright (C) 1994 by Hamish Macdonald
+ *  Taken from linux/kernel/ptrace.c and modified for M680x0.
+ *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
+ *
+ * Modified by Cort Dougan (cort@hq.fsmlabs.com)
+ * and Paul Mackerras (paulus@linuxcare.com.au).
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file README.legal in the main directory of
+ * this archive for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/security.h>
+
+#include <asm/uaccess.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+
+/*
+ * Set of msr bits that gdb can change on behalf of a process.
+ */
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#define MSR_DEBUGCHANGE	0
+#else
+#define MSR_DEBUGCHANGE	(MSR_SE | MSR_BE)
+#endif
+
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+static inline unsigned long get_reg(struct task_struct *task, int regno)
+{
+	if (regno < sizeof(struct pt_regs) / sizeof(unsigned long)
+	    && task->thread.regs != NULL)
+		return ((unsigned long *)task->thread.regs)[regno];
+	return (0);
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+static inline int put_reg(struct task_struct *task, int regno,
+			  unsigned long data)
+{
+	if (regno <= PT_MQ && task->thread.regs != NULL) {
+		if (regno == PT_MSR)
+			data = (data & MSR_DEBUGCHANGE)
+				| (task->thread.regs->msr & ~MSR_DEBUGCHANGE);
+		((unsigned long *)task->thread.regs)[regno] = data;
+		return 0;
+	}
+	return -EIO;
+}
+
+#ifdef CONFIG_ALTIVEC
+/*
+ * Get contents of AltiVec register state in task TASK
+ */
+static inline int get_vrregs(unsigned long __user *data, struct task_struct *task)
+{
+	int i, j;
+
+	if (!access_ok(VERIFY_WRITE, data, 133 * sizeof(unsigned long)))
+		return -EFAULT;
+
+	/* copy AltiVec registers VR[0] .. VR[31] */
+	for (i = 0; i < 32; i++)
+		for (j = 0; j < 4; j++, data++)
+			if (__put_user(task->thread.vr[i].u[j], data))
+				return -EFAULT;
+
+	/* copy VSCR */
+	for (i = 0; i < 4; i++, data++)
+		if (__put_user(task->thread.vscr.u[i], data))
+			return -EFAULT;
+
+        /* copy VRSAVE */
+	if (__put_user(task->thread.vrsave, data))
+		return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * Write contents of AltiVec register state into task TASK.
+ */
+static inline int set_vrregs(struct task_struct *task, unsigned long __user *data)
+{
+	int i, j;
+
+	if (!access_ok(VERIFY_READ, data, 133 * sizeof(unsigned long)))
+		return -EFAULT;
+
+	/* copy AltiVec registers VR[0] .. VR[31] */
+	for (i = 0; i < 32; i++)
+		for (j = 0; j < 4; j++, data++)
+			if (__get_user(task->thread.vr[i].u[j], data))
+				return -EFAULT;
+
+	/* copy VSCR */
+	for (i = 0; i < 4; i++, data++)
+		if (__get_user(task->thread.vscr.u[i], data))
+			return -EFAULT;
+
+	/* copy VRSAVE */
+	if (__get_user(task->thread.vrsave, data))
+		return -EFAULT;
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SPE
+
+/*
+ * For get_evrregs/set_evrregs functions 'data' has the following layout:
+ *
+ * struct {
+ *   u32 evr[32];
+ *   u64 acc;
+ *   u32 spefscr;
+ * }
+ */
+
+/*
+ * Get contents of SPE register state in task TASK.
+ */
+static inline int get_evrregs(unsigned long *data, struct task_struct *task)
+{
+	int i;
+
+	if (!access_ok(VERIFY_WRITE, data, 35 * sizeof(unsigned long)))
+		return -EFAULT;
+
+	/* copy SPEFSCR */
+	if (__put_user(task->thread.spefscr, &data[34]))
+		return -EFAULT;
+
+	/* copy SPE registers EVR[0] .. EVR[31] */
+	for (i = 0; i < 32; i++, data++)
+		if (__put_user(task->thread.evr[i], data))
+			return -EFAULT;
+
+	/* copy ACC */
+	if (__put_user64(task->thread.acc, (unsigned long long *)data))
+		return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * Write contents of SPE register state into task TASK.
+ */
+static inline int set_evrregs(struct task_struct *task, unsigned long *data)
+{
+	int i;
+
+	if (!access_ok(VERIFY_READ, data, 35 * sizeof(unsigned long)))
+		return -EFAULT;
+
+	/* copy SPEFSCR */
+	if (__get_user(task->thread.spefscr, &data[34]))
+		return -EFAULT;
+
+	/* copy SPE registers EVR[0] .. EVR[31] */
+	for (i = 0; i < 32; i++, data++)
+		if (__get_user(task->thread.evr[i], data))
+			return -EFAULT;
+	/* copy ACC */
+	if (__get_user64(task->thread.acc, (unsigned long long*)data))
+		return -EFAULT;
+
+	return 0;
+}
+#endif /* CONFIG_SPE */
+
+static inline void
+set_single_step(struct task_struct *task)
+{
+	struct pt_regs *regs = task->thread.regs;
+
+	if (regs != NULL) {
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+		task->thread.dbcr0 = DBCR0_IDM | DBCR0_IC;
+		regs->msr |= MSR_DE;
+#else
+		regs->msr |= MSR_SE;
+#endif
+	}
+}
+
+static inline void
+clear_single_step(struct task_struct *task)
+{
+	struct pt_regs *regs = task->thread.regs;
+
+	if (regs != NULL) {
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+		task->thread.dbcr0 = 0;
+		regs->msr &= ~MSR_DE;
+#else
+		regs->msr &= ~MSR_SE;
+#endif
+	}
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure single step bits etc are not set.
+ */
+void ptrace_disable(struct task_struct *child)
+{
+	/* make sure the single step bit is not set. */
+	clear_single_step(child);
+}
+
+int sys_ptrace(long request, long pid, long addr, long data)
+{
+	struct task_struct *child;
+	int ret = -EPERM;
+
+	lock_kernel();
+	if (request == PTRACE_TRACEME) {
+		/* are we already being traced? */
+		if (current->ptrace & PT_PTRACED)
+			goto out;
+		ret = security_ptrace(current->parent, current);
+		if (ret)
+			goto out;
+		/* set the ptrace bit in the process flags. */
+		current->ptrace |= PT_PTRACED;
+		ret = 0;
+		goto out;
+	}
+	ret = -ESRCH;
+	read_lock(&tasklist_lock);
+	child = find_task_by_pid(pid);
+	if (child)
+		get_task_struct(child);
+	read_unlock(&tasklist_lock);
+	if (!child)
+		goto out;
+
+	ret = -EPERM;
+	if (pid == 1)		/* you may not mess with init */
+		goto out_tsk;
+
+	if (request == PTRACE_ATTACH) {
+		ret = ptrace_attach(child);
+		goto out_tsk;
+	}
+
+	ret = ptrace_check_attach(child, request == PTRACE_KILL);
+	if (ret < 0)
+		goto out_tsk;
+
+	switch (request) {
+	/* when I and D space are separate, these will need to be fixed. */
+	case PTRACE_PEEKTEXT: /* read word at location addr. */
+	case PTRACE_PEEKDATA: {
+		unsigned long tmp;
+		int copied;
+
+		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+		ret = -EIO;
+		if (copied != sizeof(tmp))
+			break;
+		ret = put_user(tmp,(unsigned long __user *) data);
+		break;
+	}
+
+	/* read the word at location addr in the USER area. */
+	/* XXX this will need fixing for 64-bit */
+	case PTRACE_PEEKUSR: {
+		unsigned long index, tmp;
+
+		ret = -EIO;
+		/* convert to index and check */
+		index = (unsigned long) addr >> 2;
+		if ((addr & 3) || index > PT_FPSCR
+		    || child->thread.regs == NULL)
+			break;
+
+		CHECK_FULL_REGS(child->thread.regs);
+		if (index < PT_FPR0) {
+			tmp = get_reg(child, (int) index);
+		} else {
+			preempt_disable();
+			if (child->thread.regs->msr & MSR_FP)
+				giveup_fpu(child);
+			preempt_enable();
+			tmp = ((unsigned long *)child->thread.fpr)[index - PT_FPR0];
+		}
+		ret = put_user(tmp,(unsigned long __user *) data);
+		break;
+	}
+
+	/* If I and D space are separate, this will have to be fixed. */
+	case PTRACE_POKETEXT: /* write the word at location addr. */
+	case PTRACE_POKEDATA:
+		ret = 0;
+		if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data))
+			break;
+		ret = -EIO;
+		break;
+
+	/* write the word at location addr in the USER area */
+	case PTRACE_POKEUSR: {
+		unsigned long index;
+
+		ret = -EIO;
+		/* convert to index and check */
+		index = (unsigned long) addr >> 2;
+		if ((addr & 3) || index > PT_FPSCR
+		    || child->thread.regs == NULL)
+			break;
+
+		CHECK_FULL_REGS(child->thread.regs);
+		if (index == PT_ORIG_R3)
+			break;
+		if (index < PT_FPR0) {
+			ret = put_reg(child, index, data);
+		} else {
+			preempt_disable();
+			if (child->thread.regs->msr & MSR_FP)
+				giveup_fpu(child);
+			preempt_enable();
+			((unsigned long *)child->thread.fpr)[index - PT_FPR0] = data;
+			ret = 0;
+		}
+		break;
+	}
+
+	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
+	case PTRACE_CONT: { /* restart after signal. */
+		ret = -EIO;
+		if ((unsigned long) data > _NSIG)
+			break;
+		if (request == PTRACE_SYSCALL) {
+			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		} else {
+			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		}
+		child->exit_code = data;
+		/* make sure the single step bit is not set. */
+		clear_single_step(child);
+		wake_up_process(child);
+		ret = 0;
+		break;
+	}
+
+/*
+ * make the child exit.  Best I can do is send it a sigkill.
+ * perhaps it should be put in the status that it wants to
+ * exit.
+ */
+	case PTRACE_KILL: {
+		ret = 0;
+		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
+			break;
+		child->exit_code = SIGKILL;
+		/* make sure the single step bit is not set. */
+		clear_single_step(child);
+		wake_up_process(child);
+		break;
+	}
+
+	case PTRACE_SINGLESTEP: {  /* set the trap flag. */
+		ret = -EIO;
+		if ((unsigned long) data > _NSIG)
+			break;
+		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		set_single_step(child);
+		child->exit_code = data;
+		/* give it a chance to run. */
+		wake_up_process(child);
+		ret = 0;
+		break;
+	}
+
+	case PTRACE_DETACH:
+		ret = ptrace_detach(child, data);
+		break;
+
+#ifdef CONFIG_ALTIVEC
+	case PTRACE_GETVRREGS:
+		/* Get the child altivec register state. */
+		preempt_disable();
+		if (child->thread.regs->msr & MSR_VEC)
+			giveup_altivec(child);
+		preempt_enable();
+		ret = get_vrregs((unsigned long __user *)data, child);
+		break;
+
+	case PTRACE_SETVRREGS:
+		/* Set the child altivec register state. */
+		/* this is to clear the MSR_VEC bit to force a reload
+		 * of register state from memory */
+		preempt_disable();
+		if (child->thread.regs->msr & MSR_VEC)
+			giveup_altivec(child);
+		preempt_enable();
+		ret = set_vrregs(child, (unsigned long __user *)data);
+		break;
+#endif
+#ifdef CONFIG_SPE
+	case PTRACE_GETEVRREGS:
+		/* Get the child spe register state. */
+		if (child->thread.regs->msr & MSR_SPE)
+			giveup_spe(child);
+		ret = get_evrregs((unsigned long __user *)data, child);
+		break;
+
+	case PTRACE_SETEVRREGS:
+		/* Set the child spe register state. */
+		/* this is to clear the MSR_SPE bit to force a reload
+		 * of register state from memory */
+		if (child->thread.regs->msr & MSR_SPE)
+			giveup_spe(child);
+		ret = set_evrregs(child, (unsigned long __user *)data);
+		break;
+#endif
+
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+out_tsk:
+	put_task_struct(child);
+out:
+	unlock_kernel();
+	return ret;
+}
+
+void do_syscall_trace(void)
+{
+        if (!test_thread_flag(TIF_SYSCALL_TRACE)
+	    || !(current->ptrace & PT_PTRACED))
+		return;
+	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+				 ? 0x80 : 0));
+
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
diff --git a/arch/ppc/kernel/semaphore.c b/arch/ppc/kernel/semaphore.c
new file mode 100644
index 00000000000..2fe429b27c1
--- /dev/null
+++ b/arch/ppc/kernel/semaphore.c
@@ -0,0 +1,131 @@
+/*
+ * PowerPC-specific semaphore code.
+ *
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * April 2001 - Reworked by Paul Mackerras <paulus@samba.org>
+ * to eliminate the SMP races in the old version between the updates
+ * of `count' and `waking'.  Now we use negative `count' values to
+ * indicate that some process(es) are waiting for the semaphore.
+ */
+
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/atomic.h>
+#include <asm/semaphore.h>
+#include <asm/errno.h>
+
+/*
+ * Atomically update sem->count.
+ * This does the equivalent of the following:
+ *
+ *	old_count = sem->count;
+ *	tmp = MAX(old_count, 0) + incr;
+ *	sem->count = tmp;
+ *	return old_count;
+ */
+static inline int __sem_update_count(struct semaphore *sem, int incr)
+{
+	int old_count, tmp;
+
+	__asm__ __volatile__("\n"
+"1:	lwarx	%0,0,%3\n"
+"	srawi	%1,%0,31\n"
+"	andc	%1,%0,%1\n"
+"	add	%1,%1,%4\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%1,0,%3\n"
+"	bne	1b"
+	: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
+	: "r" (&sem->count), "r" (incr), "m" (sem->count)
+	: "cc");
+
+	return old_count;
+}
+
+void __up(struct semaphore *sem)
+{
+	/*
+	 * Note that we incremented count in up() before we came here,
+	 * but that was ineffective since the result was <= 0, and
+	 * any negative value of count is equivalent to 0.
+	 * This ends up setting count to 1, unless count is now > 0
+	 * (i.e. because some other cpu has called up() in the meantime),
+	 * in which case we just increment count.
+	 */
+	__sem_update_count(sem, 1);
+	wake_up(&sem->wait);
+}
+
+/*
+ * Note that when we come in to __down or __down_interruptible,
+ * we have already decremented count, but that decrement was
+ * ineffective since the result was < 0, and any negative value
+ * of count is equivalent to 0.
+ * Thus it is only when we decrement count from some value > 0
+ * that we have actually got the semaphore.
+ */
+void __sched __down(struct semaphore *sem)
+{
+	struct task_struct *tsk = current;
+	DECLARE_WAITQUEUE(wait, tsk);
+
+	tsk->state = TASK_UNINTERRUPTIBLE;
+	add_wait_queue_exclusive(&sem->wait, &wait);
+	smp_wmb();
+
+	/*
+	 * Try to get the semaphore.  If the count is > 0, then we've
+	 * got the semaphore; we decrement count and exit the loop.
+	 * If the count is 0 or negative, we set it to -1, indicating
+	 * that we are asleep, and then sleep.
+	 */
+	while (__sem_update_count(sem, -1) <= 0) {
+		schedule();
+		tsk->state = TASK_UNINTERRUPTIBLE;
+	}
+	remove_wait_queue(&sem->wait, &wait);
+	tsk->state = TASK_RUNNING;
+
+	/*
+	 * If there are any more sleepers, wake one of them up so
+	 * that it can either get the semaphore, or set count to -1
+	 * indicating that there are still processes sleeping.
+	 */
+	wake_up(&sem->wait);
+}
+
+int __sched __down_interruptible(struct semaphore * sem)
+{
+	int retval = 0;
+	struct task_struct *tsk = current;
+	DECLARE_WAITQUEUE(wait, tsk);
+
+	tsk->state = TASK_INTERRUPTIBLE;
+	add_wait_queue_exclusive(&sem->wait, &wait);
+	smp_wmb();
+
+	while (__sem_update_count(sem, -1) <= 0) {
+		if (signal_pending(current)) {
+			/*
+			 * A signal is pending - give up trying.
+			 * Set sem->count to 0 if it is negative,
+			 * since we are no longer sleeping.
+			 */
+			__sem_update_count(sem, 0);
+			retval = -EINTR;
+			break;
+		}
+		schedule();
+		tsk->state = TASK_INTERRUPTIBLE;
+	}
+	tsk->state = TASK_RUNNING;
+	remove_wait_queue(&sem->wait, &wait);
+	wake_up(&sem->wait);
+	return retval;
+}
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
new file mode 100644
index 00000000000..e97ce635b99
--- /dev/null
+++ b/arch/ppc/kernel/setup.c
@@ -0,0 +1,778 @@
+/*
+ * Common prep/pmac/chrp boot and setup code.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
+#include <linux/initrd.h>
+#include <linux/ide.h>
+#include <linux/tty.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/cpu.h>
+#include <linux/console.h>
+
+#include <asm/residual.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/bootinfo.h>
+#include <asm/setup.h>
+#include <asm/amigappc.h>
+#include <asm/smp.h>
+#include <asm/elf.h>
+#include <asm/cputable.h>
+#include <asm/bootx.h>
+#include <asm/btext.h>
+#include <asm/machdep.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/pmac_feature.h>
+#include <asm/sections.h>
+#include <asm/nvram.h>
+#include <asm/xmon.h>
+#include <asm/ocp.h>
+
+#if defined(CONFIG_85xx) || defined(CONFIG_83xx)
+#include <asm/ppc_sys.h>
+#endif
+
+#if defined CONFIG_KGDB
+#include <asm/kgdb.h>
+#endif
+
+extern void platform_init(unsigned long r3, unsigned long r4,
+		unsigned long r5, unsigned long r6, unsigned long r7);
+extern void bootx_init(unsigned long r4, unsigned long phys);
+extern void identify_cpu(unsigned long offset, unsigned long cpu);
+extern void do_cpu_ftr_fixups(unsigned long offset);
+extern void reloc_got2(unsigned long offset);
+
+extern void ppc6xx_idle(void);
+extern void power4_idle(void);
+
+extern boot_infos_t *boot_infos;
+struct ide_machdep_calls ppc_ide_md;
+char *sysmap;
+unsigned long sysmap_size;
+
+/* Used with the BI_MEMSIZE bootinfo parameter to store the memory
+   size value reported by the boot loader. */
+unsigned long boot_mem_size;
+
+unsigned long ISA_DMA_THRESHOLD;
+unsigned long DMA_MODE_READ, DMA_MODE_WRITE;
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+int _machine = 0;
+
+extern void prep_init(unsigned long r3, unsigned long r4,
+		unsigned long r5, unsigned long r6, unsigned long r7);
+extern void pmac_init(unsigned long r3, unsigned long r4,
+		unsigned long r5, unsigned long r6, unsigned long r7);
+extern void chrp_init(unsigned long r3, unsigned long r4,
+		unsigned long r5, unsigned long r6, unsigned long r7);
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+#ifdef CONFIG_MAGIC_SYSRQ
+unsigned long SYSRQ_KEY = 0x54;
+#endif /* CONFIG_MAGIC_SYSRQ */
+
+#ifdef CONFIG_VGA_CONSOLE
+unsigned long vgacon_remap_base;
+#endif
+
+struct machdep_calls ppc_md;
+
+/*
+ * These are used in binfmt_elf.c to put aux entries on the stack
+ * for each elf executable being started.
+ */
+int dcache_bsize;
+int icache_bsize;
+int ucache_bsize;
+
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_FB_VGA16) || \
+    defined(CONFIG_FB_VGA16_MODULE) || defined(CONFIG_FB_VESA)
+struct screen_info screen_info = {
+	0, 25,			/* orig-x, orig-y */
+	0,			/* unused */
+	0,			/* orig-video-page */
+	0,			/* orig-video-mode */
+	80,			/* orig-video-cols */
+	0,0,0,			/* ega_ax, ega_bx, ega_cx */
+	25,			/* orig-video-lines */
+	1,			/* orig-video-isVGA */
+	16			/* orig-video-points */
+};
+#endif /* CONFIG_VGA_CONSOLE || CONFIG_FB_VGA16 || CONFIG_FB_VESA */
+
+void machine_restart(char *cmd)
+{
+#ifdef CONFIG_NVRAM
+	nvram_sync();
+#endif
+	ppc_md.restart(cmd);
+}
+
+EXPORT_SYMBOL(machine_restart);
+
+void machine_power_off(void)
+{
+#ifdef CONFIG_NVRAM
+	nvram_sync();
+#endif
+	ppc_md.power_off();
+}
+
+EXPORT_SYMBOL(machine_power_off);
+
+void machine_halt(void)
+{
+#ifdef CONFIG_NVRAM
+	nvram_sync();
+#endif
+	ppc_md.halt();
+}
+
+EXPORT_SYMBOL(machine_halt);
+
+void (*pm_power_off)(void) = machine_power_off;
+
+#ifdef CONFIG_TAU
+extern u32 cpu_temp(unsigned long cpu);
+extern u32 cpu_temp_both(unsigned long cpu);
+#endif /* CONFIG_TAU */
+
+int show_cpuinfo(struct seq_file *m, void *v)
+{
+	int i = (int) v - 1;
+	int err = 0;
+	unsigned int pvr;
+	unsigned short maj, min;
+	unsigned long lpj;
+
+	if (i >= NR_CPUS) {
+		/* Show summary information */
+#ifdef CONFIG_SMP
+		unsigned long bogosum = 0;
+		for (i = 0; i < NR_CPUS; ++i)
+			if (cpu_online(i))
+				bogosum += cpu_data[i].loops_per_jiffy;
+		seq_printf(m, "total bogomips\t: %lu.%02lu\n",
+			   bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
+#endif /* CONFIG_SMP */
+
+		if (ppc_md.show_cpuinfo != NULL)
+			err = ppc_md.show_cpuinfo(m);
+		return err;
+	}
+
+#ifdef CONFIG_SMP
+	if (!cpu_online(i))
+		return 0;
+	pvr = cpu_data[i].pvr;
+	lpj = cpu_data[i].loops_per_jiffy;
+#else
+	pvr = mfspr(SPRN_PVR);
+	lpj = loops_per_jiffy;
+#endif
+
+	seq_printf(m, "processor\t: %d\n", i);
+	seq_printf(m, "cpu\t\t: ");
+
+	if (cur_cpu_spec[i]->pvr_mask)
+		seq_printf(m, "%s", cur_cpu_spec[i]->cpu_name);
+	else
+		seq_printf(m, "unknown (%08x)", pvr);
+#ifdef CONFIG_ALTIVEC
+	if (cur_cpu_spec[i]->cpu_features & CPU_FTR_ALTIVEC)
+		seq_printf(m, ", altivec supported");
+#endif
+	seq_printf(m, "\n");
+
+#ifdef CONFIG_TAU
+	if (cur_cpu_spec[i]->cpu_features & CPU_FTR_TAU) {
+#ifdef CONFIG_TAU_AVERAGE
+		/* more straightforward, but potentially misleading */
+		seq_printf(m,  "temperature \t: %u C (uncalibrated)\n",
+			   cpu_temp(i));
+#else
+		/* show the actual temp sensor range */
+		u32 temp;
+		temp = cpu_temp_both(i);
+		seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
+			   temp & 0xff, temp >> 16);
+#endif
+	}
+#endif /* CONFIG_TAU */
+
+	if (ppc_md.show_percpuinfo != NULL) {
+		err = ppc_md.show_percpuinfo(m, i);
+		if (err)
+			return err;
+	}
+
+	switch (PVR_VER(pvr)) {
+	case 0x0020:	/* 403 family */
+		maj = PVR_MAJ(pvr) + 1;
+		min = PVR_MIN(pvr);
+		break;
+	case 0x1008:	/* 740P/750P ?? */
+		maj = ((pvr >> 8) & 0xFF) - 1;
+		min = pvr & 0xFF;
+		break;
+	case 0x8083:	/* e300 */
+		maj = PVR_MAJ(pvr);
+		min = PVR_MIN(pvr);
+		break;
+	case 0x8020:	/* e500 */
+		maj = PVR_MAJ(pvr);
+		min = PVR_MIN(pvr);
+		break;
+	default:
+		maj = (pvr >> 8) & 0xFF;
+		min = pvr & 0xFF;
+		break;
+	}
+
+	seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n",
+		   maj, min, PVR_VER(pvr), PVR_REV(pvr));
+
+	seq_printf(m, "bogomips\t: %lu.%02lu\n",
+		   lpj / (500000/HZ), (lpj / (5000/HZ)) % 100);
+
+#if defined(CONFIG_85xx) || defined(CONFIG_83xx)
+	if (cur_ppc_sys_spec->ppc_sys_name)
+		seq_printf(m, "chipset\t\t: %s\n",
+			cur_ppc_sys_spec->ppc_sys_name);
+#endif
+
+#ifdef CONFIG_SMP
+	seq_printf(m, "\n");
+#endif
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	int i = *pos;
+
+	return i <= NR_CPUS? (void *) (i + 1): NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+struct seq_operations cpuinfo_op = {
+	.start =c_start,
+	.next =	c_next,
+	.stop =	c_stop,
+	.show =	show_cpuinfo,
+};
+
+/*
+ * We're called here very early in the boot.  We determine the machine
+ * type and call the appropriate low-level setup functions.
+ *  -- Cort <cort@fsmlabs.com>
+ *
+ * Note that the kernel may be running at an address which is different
+ * from the address that it was linked at, so we must use RELOC/PTRRELOC
+ * to access static data (including strings).  -- paulus
+ */
+__init
+unsigned long
+early_init(int r3, int r4, int r5)
+{
+ 	unsigned long phys;
+	unsigned long offset = reloc_offset();
+
+ 	/* Default */
+ 	phys = offset + KERNELBASE;
+
+	/* First zero the BSS -- use memset, some arches don't have
+	 * caches on yet */
+	memset_io(PTRRELOC(&__bss_start), 0, _end - __bss_start);
+
+	/*
+	 * Identify the CPU type and fix up code sections
+	 * that depend on which cpu we have.
+	 */
+	identify_cpu(offset, 0);
+	do_cpu_ftr_fixups(offset);
+
+#if defined(CONFIG_PPC_MULTIPLATFORM)
+	reloc_got2(offset);
+
+	/* If we came here from BootX, clear the screen,
+	 * set up some pointers and return. */
+	if ((r3 == 0x426f6f58) && (r5 == 0))
+		bootx_init(r4, phys);
+
+	/*
+	 * don't do anything on prep
+	 * for now, don't use bootinfo because it breaks yaboot 0.5
+	 * and assume that if we didn't find a magic number, we have OF
+	 */
+	else if (*(unsigned long *)(0) != 0xdeadc0de)
+		phys = prom_init(r3, r4, (prom_entry)r5);
+
+	reloc_got2(-offset);
+#endif
+
+	return phys;
+}
+
+#ifdef CONFIG_PPC_OF
+/*
+ * Assume here that all clock rates are the same in a
+ * smp system.  -- Cort
+ */
+int __openfirmware
+of_show_percpuinfo(struct seq_file *m, int i)
+{
+	struct device_node *cpu_node;
+	u32 *fp;
+	int s;
+	
+	cpu_node = find_type_devices("cpu");
+	if (!cpu_node)
+		return 0;
+	for (s = 0; s < i && cpu_node->next; s++)
+		cpu_node = cpu_node->next;
+	fp = (u32 *)get_property(cpu_node, "clock-frequency", NULL);
+	if (fp)
+		seq_printf(m, "clock\t\t: %dMHz\n", *fp / 1000000);
+	return 0;
+}
+
+void __init
+intuit_machine_type(void)
+{
+	char *model;
+	struct device_node *root;
+	
+	/* ask the OF info if we're a chrp or pmac */
+	root = find_path_device("/");
+	if (root != 0) {
+		/* assume pmac unless proven to be chrp -- Cort */
+		_machine = _MACH_Pmac;
+		model = get_property(root, "device_type", NULL);
+		if (model && !strncmp("chrp", model, 4))
+			_machine = _MACH_chrp;
+		else {
+			model = get_property(root, "model", NULL);
+			if (model && !strncmp(model, "IBM", 3))
+				_machine = _MACH_chrp;
+		}
+	}
+}
+#endif
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+/*
+ * The PPC_MULTIPLATFORM version of platform_init...
+ */
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+	      unsigned long r6, unsigned long r7)
+{
+#ifdef CONFIG_BOOTX_TEXT
+	if (boot_text_mapped) {
+		btext_clearscreen();
+		btext_welcome();
+	}
+#endif
+
+	parse_bootinfo(find_bootinfo());
+
+	/* if we didn't get any bootinfo telling us what we are... */
+	if (_machine == 0) {
+		/* prep boot loader tells us if we're prep or not */
+		if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) )
+			_machine = _MACH_prep;
+	}
+
+	/* not much more to do here, if prep */
+	if (_machine == _MACH_prep) {
+		prep_init(r3, r4, r5, r6, r7);
+		return;
+	}
+
+	/* prom_init has already been called from __start */
+	if (boot_infos)
+		relocate_nodes();
+
+	/* If we aren't PReP, we can find out if we're Pmac
+	 * or CHRP with this. */
+	if (_machine == 0)
+		intuit_machine_type();
+
+	/* finish_device_tree may need _machine defined. */
+	finish_device_tree();
+
+	/*
+	 * If we were booted via quik, r3 points to the physical
+	 * address of the command-line parameters.
+	 * If we were booted from an xcoff image (i.e. netbooted or
+	 * booted from floppy), we get the command line from the
+	 * bootargs property of the /chosen node.
+	 * If an initial ramdisk is present, r3 and r4
+	 * are used for initrd_start and initrd_size,
+	 * otherwise they contain 0xdeadbeef.
+	 */
+	if (r3 >= 0x4000 && r3 < 0x800000 && r4 == 0) {
+		strlcpy(cmd_line, (char *)r3 + KERNELBASE,
+			sizeof(cmd_line));
+	} else if (boot_infos != 0) {
+		/* booted by BootX - check for ramdisk */
+		if (boot_infos->kernelParamsOffset != 0)
+			strlcpy(cmd_line, (char *) boot_infos
+				+ boot_infos->kernelParamsOffset,
+				sizeof(cmd_line));
+#ifdef CONFIG_BLK_DEV_INITRD
+		if (boot_infos->ramDisk) {
+			initrd_start = (unsigned long) boot_infos
+				+ boot_infos->ramDisk;
+			initrd_end = initrd_start + boot_infos->ramDiskSize;
+			initrd_below_start_ok = 1;
+		}
+#endif
+	} else {
+		struct device_node *chosen;
+		char *p;
+	
+#ifdef CONFIG_BLK_DEV_INITRD
+		if (r3 && r4 && r4 != 0xdeadbeef) {
+			if (r3 < KERNELBASE)
+				r3 += KERNELBASE;
+			initrd_start = r3;
+			initrd_end = r3 + r4;
+			ROOT_DEV = Root_RAM0;
+			initrd_below_start_ok = 1;
+		}
+#endif
+		chosen = find_devices("chosen");
+		if (chosen != NULL) {
+			p = get_property(chosen, "bootargs", NULL);
+			if (p && *p) {
+				strlcpy(cmd_line, p, sizeof(cmd_line));
+			}
+		}
+	}
+#ifdef CONFIG_ADB
+	if (strstr(cmd_line, "adb_sync")) {
+		extern int __adb_probe_sync;
+		__adb_probe_sync = 1;
+	}
+#endif /* CONFIG_ADB */
+
+	switch (_machine) {
+	case _MACH_Pmac:
+		pmac_init(r3, r4, r5, r6, r7);
+		break;
+	case _MACH_chrp:
+		chrp_init(r3, r4, r5, r6, r7);
+		break;
+	}
+}
+
+#ifdef CONFIG_SERIAL_CORE_CONSOLE
+extern char *of_stdout_device;
+
+static int __init set_preferred_console(void)
+{
+	struct device_node *prom_stdout;
+	char *name;
+	int offset;
+
+	if (of_stdout_device == NULL)
+		return -ENODEV;
+
+	/* The user has requested a console so this is already set up. */
+	if (strstr(saved_command_line, "console="))
+		return -EBUSY;
+
+	prom_stdout = find_path_device(of_stdout_device);
+	if (!prom_stdout)
+		return -ENODEV;
+
+	name = (char *)get_property(prom_stdout, "name", NULL);
+	if (!name)
+		return -ENODEV;
+
+	if (strcmp(name, "serial") == 0) {
+		int i;
+		u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
+		if (i > 8) {
+			switch (reg[1]) {
+				case 0x3f8:
+					offset = 0;
+					break;
+				case 0x2f8:
+					offset = 1;
+					break;
+				case 0x898:
+					offset = 2;
+					break;
+				case 0x890:
+					offset = 3;
+					break;
+				default:
+					/* We dont recognise the serial port */
+					return -ENODEV;
+			}
+		}
+	} else if (strcmp(name, "ch-a") == 0)
+		offset = 0;
+	else if (strcmp(name, "ch-b") == 0)
+		offset = 1;
+	else
+		return -ENODEV;
+	return add_preferred_console("ttyS", offset, NULL);
+}
+console_initcall(set_preferred_console);
+#endif /* CONFIG_SERIAL_CORE_CONSOLE */
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+struct bi_record *find_bootinfo(void)
+{
+	struct bi_record *rec;
+
+	rec = (struct bi_record *)_ALIGN((ulong)__bss_start+(1<<20)-1,(1<<20));
+	if ( rec->tag != BI_FIRST ) {
+		/*
+		 * This 0x10000 offset is a terrible hack but it will go away when
+		 * we have the bootloader handle all the relocation and
+		 * prom calls -- Cort
+		 */
+		rec = (struct bi_record *)_ALIGN((ulong)__bss_start+0x10000+(1<<20)-1,(1<<20));
+		if ( rec->tag != BI_FIRST )
+			return NULL;
+	}
+	return rec;
+}
+
+void parse_bootinfo(struct bi_record *rec)
+{
+	if (rec == NULL || rec->tag != BI_FIRST)
+		return;
+	while (rec->tag != BI_LAST) {
+		ulong *data = rec->data;
+		switch (rec->tag) {
+		case BI_CMD_LINE:
+			strlcpy(cmd_line, (void *)data, sizeof(cmd_line));
+			break;
+		case BI_SYSMAP:
+			sysmap = (char *)((data[0] >= (KERNELBASE)) ? data[0] :
+					  (data[0]+KERNELBASE));
+			sysmap_size = data[1];
+			break;
+#ifdef CONFIG_BLK_DEV_INITRD
+		case BI_INITRD:
+			initrd_start = data[0] + KERNELBASE;
+			initrd_end = data[0] + data[1] + KERNELBASE;
+			break;
+#endif /* CONFIG_BLK_DEV_INITRD */
+#ifdef CONFIG_PPC_MULTIPLATFORM
+		case BI_MACHTYPE:
+			_machine = data[0];
+			break;
+#endif
+		case BI_MEMSIZE:
+			boot_mem_size = data[0];
+			break;
+		}
+		rec = (struct bi_record *)((ulong)rec + rec->size);
+	}
+}
+
+/*
+ * Find out what kind of machine we're on and save any data we need
+ * from the early boot process (devtree is copied on pmac by prom_init()).
+ * This is called very early on the boot process, after a minimal
+ * MMU environment has been set up but before MMU_init is called.
+ */
+void __init
+machine_init(unsigned long r3, unsigned long r4, unsigned long r5,
+	     unsigned long r6, unsigned long r7)
+{
+#ifdef CONFIG_CMDLINE
+	strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
+#endif /* CONFIG_CMDLINE */
+
+#ifdef CONFIG_6xx
+	ppc_md.power_save = ppc6xx_idle;
+#endif
+#ifdef CONFIG_POWER4
+	ppc_md.power_save = power4_idle;
+#endif
+
+	platform_init(r3, r4, r5, r6, r7);
+
+	if (ppc_md.progress)
+		ppc_md.progress("id mach(): done", 0x200);
+}
+
+/* Checks "l2cr=xxxx" command-line option */
+int __init ppc_setup_l2cr(char *str)
+{
+	if (cpu_has_feature(CPU_FTR_L2CR)) {
+		unsigned long val = simple_strtoul(str, NULL, 0);
+		printk(KERN_INFO "l2cr set to %lx\n", val);
+		_set_L2CR(0);		/* force invalidate by disable cache */
+		_set_L2CR(val);		/* and enable it */
+	}
+	return 1;
+}
+__setup("l2cr=", ppc_setup_l2cr);
+
+#ifdef CONFIG_GENERIC_NVRAM
+
+/* Generic nvram hooks used by drivers/char/gen_nvram.c */
+unsigned char nvram_read_byte(int addr)
+{
+	if (ppc_md.nvram_read_val)
+		return ppc_md.nvram_read_val(addr);
+	return 0xff;
+}
+EXPORT_SYMBOL(nvram_read_byte);
+
+void nvram_write_byte(unsigned char val, int addr)
+{
+	if (ppc_md.nvram_write_val)
+		ppc_md.nvram_write_val(addr, val);
+}
+EXPORT_SYMBOL(nvram_write_byte);
+
+void nvram_sync(void)
+{
+	if (ppc_md.nvram_sync)
+		ppc_md.nvram_sync();
+}
+EXPORT_SYMBOL(nvram_sync);
+
+#endif /* CONFIG_NVRAM */
+
+static struct cpu cpu_devices[NR_CPUS];
+
+int __init ppc_init(void)
+{
+	int i;
+
+	/* clear the progress line */
+	if ( ppc_md.progress ) ppc_md.progress("             ", 0xffff);
+
+	/* register CPU devices */
+	for (i = 0; i < NR_CPUS; i++)
+		if (cpu_possible(i))
+			register_cpu(&cpu_devices[i], i, NULL);
+
+	/* call platform init */
+	if (ppc_md.init != NULL) {
+		ppc_md.init();
+	}
+	return 0;
+}
+
+arch_initcall(ppc_init);
+
+/* Warning, IO base is not yet inited */
+void __init setup_arch(char **cmdline_p)
+{
+	extern char *klimit;
+	extern void do_init_bootmem(void);
+
+	/* so udelay does something sensible, assume <= 1000 bogomips */
+	loops_per_jiffy = 500000000 / HZ;
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+	/* This could be called "early setup arch", it must be done
+	 * now because xmon need it
+	 */
+	if (_machine == _MACH_Pmac)
+		pmac_feature_init();	/* New cool way */
+#endif
+
+#ifdef CONFIG_XMON
+	xmon_map_scc();
+	if (strstr(cmd_line, "xmon"))
+		xmon(NULL);
+#endif /* CONFIG_XMON */
+	if ( ppc_md.progress ) ppc_md.progress("setup_arch: enter", 0x3eab);
+
+#if defined(CONFIG_KGDB)
+	if (ppc_md.kgdb_map_scc)
+		ppc_md.kgdb_map_scc();
+	set_debug_traps();
+	if (strstr(cmd_line, "gdb")) {
+		if (ppc_md.progress)
+			ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
+		printk("kgdb breakpoint activated\n");
+		breakpoint();
+	}
+#endif
+
+	/*
+	 * Set cache line size based on type of cpu as a default.
+	 * Systems with OF can look in the properties on the cpu node(s)
+	 * for a possibly more accurate value.
+	 */
+	if (cpu_has_feature(CPU_FTR_SPLIT_ID_CACHE)) {
+		dcache_bsize = cur_cpu_spec[0]->dcache_bsize;
+		icache_bsize = cur_cpu_spec[0]->icache_bsize;
+		ucache_bsize = 0;
+	} else
+		ucache_bsize = dcache_bsize = icache_bsize
+			= cur_cpu_spec[0]->dcache_bsize;
+
+	/* reboot on panic */
+	panic_timeout = 180;
+
+	init_mm.start_code = PAGE_OFFSET;
+	init_mm.end_code = (unsigned long) _etext;
+	init_mm.end_data = (unsigned long) _edata;
+	init_mm.brk = (unsigned long) klimit;
+
+	/* Save unparsed command line copy for /proc/cmdline */
+	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
+	*cmdline_p = cmd_line;
+
+	/* set up the bootmem stuff with available memory */
+	do_init_bootmem();
+	if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
+
+#ifdef CONFIG_PPC_OCP
+	/* Initialize OCP device list */
+	ocp_early_init();
+	if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab);
+#endif
+
+#ifdef CONFIG_DUMMY_CONSOLE
+	conswitchp = &dummy_con;
+#endif
+
+	ppc_md.setup_arch();
+	if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
+
+	paging_init();
+
+	/* this is for modules since _machine can be a define -- Cort */
+	ppc_md.ppc_machine = _machine;
+}
diff --git a/arch/ppc/kernel/signal.c b/arch/ppc/kernel/signal.c
new file mode 100644
index 00000000000..9567d3041ea
--- /dev/null
+++ b/arch/ppc/kernel/signal.c
@@ -0,0 +1,775 @@
+/*
+ *  arch/ppc/kernel/signal.c
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Derived from "arch/i386/kernel/signal.c"
+ *    Copyright (C) 1991, 1992 Linus Torvalds
+ *    1997-11-28  Modified for POSIX.1b signals by Richard Henderson
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/elf.h>
+#include <linux/tty.h>
+#include <linux/binfmts.h>
+#include <linux/suspend.h>
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/cacheflush.h>
+
+#undef DEBUG_SIG
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+extern void sigreturn_exit(struct pt_regs *);
+
+#define GP_REGS_SIZE	min(sizeof(elf_gregset_t), sizeof(struct pt_regs))
+
+int do_signal(sigset_t *oldset, struct pt_regs *regs);
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+int
+sys_sigsuspend(old_sigset_t mask, int p2, int p3, int p4, int p6, int p7,
+	       struct pt_regs *regs)
+{
+	sigset_t saveset;
+
+	mask &= _BLOCKABLE;
+	spin_lock_irq(&current->sighand->siglock);
+	saveset = current->blocked;
+	siginitset(&current->blocked, mask);
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	regs->result = -EINTR;
+	regs->gpr[3] = EINTR;
+	regs->ccr |= 0x10000000;
+	while (1) {
+		current->state = TASK_INTERRUPTIBLE;
+		schedule();
+		if (do_signal(&saveset, regs))
+			sigreturn_exit(regs);
+	}
+}
+
+int
+sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, int p3, int p4,
+		  int p6, int p7, struct pt_regs *regs)
+{
+	sigset_t saveset, newset;
+
+	/* XXX: Don't preclude handling different sized sigset_t's.  */
+	if (sigsetsize != sizeof(sigset_t))
+		return -EINVAL;
+
+	if (copy_from_user(&newset, unewset, sizeof(newset)))
+		return -EFAULT;
+	sigdelsetmask(&newset, ~_BLOCKABLE);
+
+	spin_lock_irq(&current->sighand->siglock);
+	saveset = current->blocked;
+	current->blocked = newset;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	regs->result = -EINTR;
+	regs->gpr[3] = EINTR;
+	regs->ccr |= 0x10000000;
+	while (1) {
+		current->state = TASK_INTERRUPTIBLE;
+		schedule();
+		if (do_signal(&saveset, regs))
+			sigreturn_exit(regs);
+	}
+}
+
+
+int
+sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, int r5,
+		int r6, int r7, int r8, struct pt_regs *regs)
+{
+	return do_sigaltstack(uss, uoss, regs->gpr[1]);
+}
+
+int
+sys_sigaction(int sig, const struct old_sigaction __user *act,
+	      struct old_sigaction __user *oact)
+{
+	struct k_sigaction new_ka, old_ka;
+	int ret;
+
+	if (act) {
+		old_sigset_t mask;
+		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+			return -EFAULT;
+		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
+		__get_user(mask, &act->sa_mask);
+		siginitset(&new_ka.sa.sa_mask, mask);
+	}
+
+	ret = do_sigaction(sig, (act? &new_ka: NULL), (oact? &old_ka: NULL));
+
+	if (!ret && oact) {
+		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+			return -EFAULT;
+		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+	}
+
+	return ret;
+}
+
+/*
+ * When we have signals to deliver, we set up on the
+ * user stack, going down from the original stack pointer:
+ *	a sigregs struct
+ *	a sigcontext struct
+ *	a gap of __SIGNAL_FRAMESIZE bytes
+ *
+ * Each of these things must be a multiple of 16 bytes in size.
+ *
+ */
+struct sigregs {
+	struct mcontext	mctx;		/* all the register values */
+	/* Programs using the rs6000/xcoff abi can save up to 19 gp regs
+	   and 18 fp regs below sp before decrementing it. */
+	int		abigap[56];
+};
+
+/* We use the mc_pad field for the signal return trampoline. */
+#define tramp	mc_pad
+
+/*
+ *  When we have rt signals to deliver, we set up on the
+ *  user stack, going down from the original stack pointer:
+ *	one rt_sigframe struct (siginfo + ucontext + ABI gap)
+ *	a gap of __SIGNAL_FRAMESIZE+16 bytes
+ *  (the +16 is to get the siginfo and ucontext in the same
+ *  positions as in older kernels).
+ *
+ *  Each of these things must be a multiple of 16 bytes in size.
+ *
+ */
+struct rt_sigframe
+{
+	struct siginfo info;
+	struct ucontext uc;
+	/* Programs using the rs6000/xcoff abi can save up to 19 gp regs
+	   and 18 fp regs below sp before decrementing it. */
+	int		abigap[56];
+};
+
+/*
+ * Save the current user registers on the user stack.
+ * We only save the altivec/spe registers if the process has used
+ * altivec/spe instructions at some point.
+ */
+static int
+save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, int sigret)
+{
+	/* save general and floating-point registers */
+	CHECK_FULL_REGS(regs);
+	preempt_disable();
+	if (regs->msr & MSR_FP)
+		giveup_fpu(current);
+#ifdef CONFIG_ALTIVEC
+	if (current->thread.used_vr && (regs->msr & MSR_VEC))
+		giveup_altivec(current);
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+	if (current->thread.used_spe && (regs->msr & MSR_SPE))
+		giveup_spe(current);
+#endif /* CONFIG_ALTIVEC */
+	preempt_enable();
+
+	if (__copy_to_user(&frame->mc_gregs, regs, GP_REGS_SIZE)
+	    || __copy_to_user(&frame->mc_fregs, current->thread.fpr,
+			      ELF_NFPREG * sizeof(double)))
+		return 1;
+
+	current->thread.fpscr = 0;	/* turn off all fp exceptions */
+
+#ifdef CONFIG_ALTIVEC
+	/* save altivec registers */
+	if (current->thread.used_vr) {
+		if (__copy_to_user(&frame->mc_vregs, current->thread.vr,
+				   ELF_NVRREG * sizeof(vector128)))
+			return 1;
+		/* set MSR_VEC in the saved MSR value to indicate that
+		   frame->mc_vregs contains valid data */
+		if (__put_user(regs->msr | MSR_VEC, &frame->mc_gregs[PT_MSR]))
+			return 1;
+	}
+	/* else assert((regs->msr & MSR_VEC) == 0) */
+
+	/* We always copy to/from vrsave, it's 0 if we don't have or don't
+	 * use altivec. Since VSCR only contains 32 bits saved in the least
+	 * significant bits of a vector, we "cheat" and stuff VRSAVE in the
+	 * most significant bits of that same vector. --BenH
+	 */
+	if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32]))
+		return 1;
+#endif /* CONFIG_ALTIVEC */
+
+#ifdef CONFIG_SPE
+	/* save spe registers */
+	if (current->thread.used_spe) {
+		if (__copy_to_user(&frame->mc_vregs, current->thread.evr,
+				   ELF_NEVRREG * sizeof(u32)))
+			return 1;
+		/* set MSR_SPE in the saved MSR value to indicate that
+		   frame->mc_vregs contains valid data */
+		if (__put_user(regs->msr | MSR_SPE, &frame->mc_gregs[PT_MSR]))
+			return 1;
+	}
+	/* else assert((regs->msr & MSR_SPE) == 0) */
+
+	/* We always copy to/from spefscr */
+	if (__put_user(current->thread.spefscr, (u32 *)&frame->mc_vregs + ELF_NEVRREG))
+		return 1;
+#endif /* CONFIG_SPE */
+
+	if (sigret) {
+		/* Set up the sigreturn trampoline: li r0,sigret; sc */
+		if (__put_user(0x38000000UL + sigret, &frame->tramp[0])
+		    || __put_user(0x44000002UL, &frame->tramp[1]))
+			return 1;
+		flush_icache_range((unsigned long) &frame->tramp[0],
+				   (unsigned long) &frame->tramp[2]);
+	}
+
+	return 0;
+}
+
+/*
+ * Restore the current user register values from the user stack,
+ * (except for MSR).
+ */
+static int
+restore_user_regs(struct pt_regs *regs, struct mcontext __user *sr, int sig)
+{
+	unsigned long save_r2 = 0;
+#if defined(CONFIG_ALTIVEC) || defined(CONFIG_SPE)
+	unsigned long msr;
+#endif
+
+	/* backup/restore the TLS as we don't want it to be modified */
+	if (!sig)
+		save_r2 = regs->gpr[2];
+	/* copy up to but not including MSR */
+	if (__copy_from_user(regs, &sr->mc_gregs, PT_MSR * sizeof(elf_greg_t)))
+		return 1;
+	/* copy from orig_r3 (the word after the MSR) up to the end */
+	if (__copy_from_user(&regs->orig_gpr3, &sr->mc_gregs[PT_ORIG_R3],
+			     GP_REGS_SIZE - PT_ORIG_R3 * sizeof(elf_greg_t)))
+		return 1;
+	if (!sig)
+		regs->gpr[2] = save_r2;
+
+	/* force the process to reload the FP registers from
+	   current->thread when it next does FP instructions */
+	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);
+	if (__copy_from_user(current->thread.fpr, &sr->mc_fregs,
+			     sizeof(sr->mc_fregs)))
+		return 1;
+
+#ifdef CONFIG_ALTIVEC
+	/* force the process to reload the altivec registers from
+	   current->thread when it next does altivec instructions */
+	regs->msr &= ~MSR_VEC;
+	if (!__get_user(msr, &sr->mc_gregs[PT_MSR]) && (msr & MSR_VEC) != 0) {
+		/* restore altivec registers from the stack */
+		if (__copy_from_user(current->thread.vr, &sr->mc_vregs,
+				     sizeof(sr->mc_vregs)))
+			return 1;
+	} else if (current->thread.used_vr)
+		memset(&current->thread.vr, 0, ELF_NVRREG * sizeof(vector128));
+
+	/* Always get VRSAVE back */
+	if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32]))
+		return 1;
+#endif /* CONFIG_ALTIVEC */
+
+#ifdef CONFIG_SPE
+	/* force the process to reload the spe registers from
+	   current->thread when it next does spe instructions */
+	regs->msr &= ~MSR_SPE;
+	if (!__get_user(msr, &sr->mc_gregs[PT_MSR]) && (msr & MSR_SPE) != 0) {
+		/* restore spe registers from the stack */
+		if (__copy_from_user(current->thread.evr, &sr->mc_vregs,
+				     ELF_NEVRREG * sizeof(u32)))
+			return 1;
+	} else if (current->thread.used_spe)
+		memset(&current->thread.evr, 0, ELF_NEVRREG * sizeof(u32));
+
+	/* Always get SPEFSCR back */
+	if (__get_user(current->thread.spefscr, (u32 *)&sr->mc_vregs + ELF_NEVRREG))
+		return 1;
+#endif /* CONFIG_SPE */
+
+#ifndef CONFIG_SMP
+	preempt_disable();
+	if (last_task_used_math == current)
+		last_task_used_math = NULL;
+	if (last_task_used_altivec == current)
+		last_task_used_altivec = NULL;
+	if (last_task_used_spe == current)
+		last_task_used_spe = NULL;
+	preempt_enable();
+#endif
+	return 0;
+}
+
+/*
+ * Restore the user process's signal mask
+ */
+static void
+restore_sigmask(sigset_t *set)
+{
+	sigdelsetmask(set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	current->blocked = *set;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+}
+
+/*
+ * Set up a signal frame for a "real-time" signal handler
+ * (one which gets siginfo).
+ */
+static void
+handle_rt_signal(unsigned long sig, struct k_sigaction *ka,
+		 siginfo_t *info, sigset_t *oldset, struct pt_regs * regs,
+		 unsigned long newsp)
+{
+	struct rt_sigframe __user *rt_sf;
+	struct mcontext __user *frame;
+	unsigned long origsp = newsp;
+
+	/* Set up Signal Frame */
+	/* Put a Real Time Context onto stack */
+	newsp -= sizeof(*rt_sf);
+	rt_sf = (struct rt_sigframe __user *) newsp;
+
+	/* create a stack frame for the caller of the handler */
+	newsp -= __SIGNAL_FRAMESIZE + 16;
+
+	if (!access_ok(VERIFY_WRITE, (void __user *) newsp, origsp - newsp))
+		goto badframe;
+
+	/* Put the siginfo & fill in most of the ucontext */
+	if (copy_siginfo_to_user(&rt_sf->info, info)
+	    || __put_user(0, &rt_sf->uc.uc_flags)
+	    || __put_user(0, &rt_sf->uc.uc_link)
+	    || __put_user(current->sas_ss_sp, &rt_sf->uc.uc_stack.ss_sp)
+	    || __put_user(sas_ss_flags(regs->gpr[1]),
+			  &rt_sf->uc.uc_stack.ss_flags)
+	    || __put_user(current->sas_ss_size, &rt_sf->uc.uc_stack.ss_size)
+	    || __put_user(&rt_sf->uc.uc_mcontext, &rt_sf->uc.uc_regs)
+	    || __copy_to_user(&rt_sf->uc.uc_sigmask, oldset, sizeof(*oldset)))
+		goto badframe;
+
+	/* Save user registers on the stack */
+	frame = &rt_sf->uc.uc_mcontext;
+	if (save_user_regs(regs, frame, __NR_rt_sigreturn))
+		goto badframe;
+
+	if (put_user(regs->gpr[1], (unsigned long __user *)newsp))
+		goto badframe;
+	regs->gpr[1] = newsp;
+	regs->gpr[3] = sig;
+	regs->gpr[4] = (unsigned long) &rt_sf->info;
+	regs->gpr[5] = (unsigned long) &rt_sf->uc;
+	regs->gpr[6] = (unsigned long) rt_sf;
+	regs->nip = (unsigned long) ka->sa.sa_handler;
+	regs->link = (unsigned long) frame->tramp;
+	regs->trap = 0;
+
+	return;
+
+badframe:
+#ifdef DEBUG_SIG
+	printk("badframe in handle_rt_signal, regs=%p frame=%p newsp=%lx\n",
+	       regs, frame, newsp);
+#endif
+	force_sigsegv(sig, current);
+}
+
+static int do_setcontext(struct ucontext __user *ucp, struct pt_regs *regs, int sig)
+{
+	sigset_t set;
+	struct mcontext __user *mcp;
+
+	if (__copy_from_user(&set, &ucp->uc_sigmask, sizeof(set))
+	    || __get_user(mcp, &ucp->uc_regs))
+		return -EFAULT;
+	restore_sigmask(&set);
+	if (restore_user_regs(regs, mcp, sig))
+		return -EFAULT;
+
+	return 0;
+}
+
+int sys_swapcontext(struct ucontext __user *old_ctx,
+		    struct ucontext __user *new_ctx,
+		    int ctx_size, int r6, int r7, int r8, struct pt_regs *regs)
+{
+	unsigned char tmp;
+
+	/* Context size is for future use. Right now, we only make sure
+	 * we are passed something we understand
+	 */
+	if (ctx_size < sizeof(struct ucontext))
+		return -EINVAL;
+
+	if (old_ctx != NULL) {
+		if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
+		    || save_user_regs(regs, &old_ctx->uc_mcontext, 0)
+		    || __copy_to_user(&old_ctx->uc_sigmask,
+				      &current->blocked, sizeof(sigset_t))
+		    || __put_user(&old_ctx->uc_mcontext, &old_ctx->uc_regs))
+			return -EFAULT;
+	}
+	if (new_ctx == NULL)
+		return 0;
+	if (!access_ok(VERIFY_READ, new_ctx, sizeof(*new_ctx))
+	    || __get_user(tmp, (u8 __user *) new_ctx)
+	    || __get_user(tmp, (u8 __user *) (new_ctx + 1) - 1))
+		return -EFAULT;
+
+	/*
+	 * If we get a fault copying the context into the kernel's
+	 * image of the user's registers, we can't just return -EFAULT
+	 * because the user's registers will be corrupted.  For instance
+	 * the NIP value may have been updated but not some of the
+	 * other registers.  Given that we have done the access_ok
+	 * and successfully read the first and last bytes of the region
+	 * above, this should only happen in an out-of-memory situation
+	 * or if another thread unmaps the region containing the context.
+	 * We kill the task with a SIGSEGV in this situation.
+	 */
+	if (do_setcontext(new_ctx, regs, 0))
+		do_exit(SIGSEGV);
+	sigreturn_exit(regs);
+	/* doesn't actually return back to here */
+	return 0;
+}
+
+int sys_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
+		     struct pt_regs *regs)
+{
+	struct rt_sigframe __user *rt_sf;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+	rt_sf = (struct rt_sigframe __user *)
+		(regs->gpr[1] + __SIGNAL_FRAMESIZE + 16);
+	if (!access_ok(VERIFY_READ, rt_sf, sizeof(struct rt_sigframe)))
+		goto bad;
+	if (do_setcontext(&rt_sf->uc, regs, 1))
+		goto bad;
+
+	/*
+	 * It's not clear whether or why it is desirable to save the
+	 * sigaltstack setting on signal delivery and restore it on
+	 * signal return.  But other architectures do this and we have
+	 * always done it up until now so it is probably better not to
+	 * change it.  -- paulus
+	 */
+	do_sigaltstack(&rt_sf->uc.uc_stack, NULL, regs->gpr[1]);
+
+	sigreturn_exit(regs);		/* doesn't return here */
+	return 0;
+
+ bad:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+int sys_debug_setcontext(struct ucontext __user *ctx,
+			 int ndbg, struct sig_dbg_op *dbg,
+			 int r6, int r7, int r8,
+			 struct pt_regs *regs)
+{
+	struct sig_dbg_op op;
+	int i;
+	unsigned long new_msr = regs->msr;
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+	unsigned long new_dbcr0 = current->thread.dbcr0;
+#endif
+
+	for (i=0; i<ndbg; i++) {
+		if (__copy_from_user(&op, dbg, sizeof(op)))
+			return -EFAULT;
+		switch (op.dbg_type) {
+		case SIG_DBG_SINGLE_STEPPING:
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+			if (op.dbg_value) {
+				new_msr |= MSR_DE;
+				new_dbcr0 |= (DBCR0_IDM | DBCR0_IC);
+			} else {
+				new_msr &= ~MSR_DE;
+				new_dbcr0 &= ~(DBCR0_IDM | DBCR0_IC);
+			}
+#else
+			if (op.dbg_value)
+				new_msr |= MSR_SE;
+			else
+				new_msr &= ~MSR_SE;
+#endif
+			break;
+		case SIG_DBG_BRANCH_TRACING:
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+			return -EINVAL;
+#else
+			if (op.dbg_value)
+				new_msr |= MSR_BE;
+			else
+				new_msr &= ~MSR_BE;
+#endif
+			break;
+
+		default:
+			return -EINVAL;
+		}
+	}
+
+	/* We wait until here to actually install the values in the
+	   registers so if we fail in the above loop, it will not
+	   affect the contents of these registers.  After this point,
+	   failure is a problem, anyway, and it's very unlikely unless
+	   the user is really doing something wrong. */
+	regs->msr = new_msr;
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+	current->thread.dbcr0 = new_dbcr0;
+#endif
+
+	/*
+	 * If we get a fault copying the context into the kernel's
+	 * image of the user's registers, we can't just return -EFAULT
+	 * because the user's registers will be corrupted.  For instance
+	 * the NIP value may have been updated but not some of the
+	 * other registers.  Given that we have done the access_ok
+	 * and successfully read the first and last bytes of the region
+	 * above, this should only happen in an out-of-memory situation
+	 * or if another thread unmaps the region containing the context.
+	 * We kill the task with a SIGSEGV in this situation.
+	 */
+	if (do_setcontext(ctx, regs, 1)) {
+		force_sig(SIGSEGV, current);
+		goto out;
+	}
+
+	/*
+	 * It's not clear whether or why it is desirable to save the
+	 * sigaltstack setting on signal delivery and restore it on
+	 * signal return.  But other architectures do this and we have
+	 * always done it up until now so it is probably better not to
+	 * change it.  -- paulus
+	 */
+	do_sigaltstack(&ctx->uc_stack, NULL, regs->gpr[1]);
+
+	sigreturn_exit(regs);
+	/* doesn't actually return back to here */
+
+ out:
+	return 0;
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+static void
+handle_signal(unsigned long sig, struct k_sigaction *ka,
+	      siginfo_t *info, sigset_t *oldset, struct pt_regs * regs,
+	      unsigned long newsp)
+{
+	struct sigcontext __user *sc;
+	struct sigregs __user *frame;
+	unsigned long origsp = newsp;
+
+	/* Set up Signal Frame */
+	newsp -= sizeof(struct sigregs);
+	frame = (struct sigregs __user *) newsp;
+
+	/* Put a sigcontext on the stack */
+	newsp -= sizeof(*sc);
+	sc = (struct sigcontext __user *) newsp;
+
+	/* create a stack frame for the caller of the handler */
+	newsp -= __SIGNAL_FRAMESIZE;
+
+	if (!access_ok(VERIFY_WRITE, (void __user *) newsp, origsp - newsp))
+		goto badframe;
+
+#if _NSIG != 64
+#error "Please adjust handle_signal()"
+#endif
+	if (__put_user((unsigned long) ka->sa.sa_handler, &sc->handler)
+	    || __put_user(oldset->sig[0], &sc->oldmask)
+	    || __put_user(oldset->sig[1], &sc->_unused[3])
+	    || __put_user((struct pt_regs *)frame, &sc->regs)
+	    || __put_user(sig, &sc->signal))
+		goto badframe;
+
+	if (save_user_regs(regs, &frame->mctx, __NR_sigreturn))
+		goto badframe;
+
+	if (put_user(regs->gpr[1], (unsigned long __user *)newsp))
+		goto badframe;
+	regs->gpr[1] = newsp;
+	regs->gpr[3] = sig;
+	regs->gpr[4] = (unsigned long) sc;
+	regs->nip = (unsigned long) ka->sa.sa_handler;
+	regs->link = (unsigned long) frame->mctx.tramp;
+	regs->trap = 0;
+
+	return;
+
+badframe:
+#ifdef DEBUG_SIG
+	printk("badframe in handle_signal, regs=%p frame=%p newsp=%lx\n",
+	       regs, frame, newsp);
+#endif
+	force_sigsegv(sig, current);
+}
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+int sys_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
+		  struct pt_regs *regs)
+{
+	struct sigcontext __user *sc;
+	struct sigcontext sigctx;
+	struct mcontext __user *sr;
+	sigset_t set;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+	sc = (struct sigcontext __user *)(regs->gpr[1] + __SIGNAL_FRAMESIZE);
+	if (copy_from_user(&sigctx, sc, sizeof(sigctx)))
+		goto badframe;
+
+	set.sig[0] = sigctx.oldmask;
+	set.sig[1] = sigctx._unused[3];
+	restore_sigmask(&set);
+
+	sr = (struct mcontext __user *) sigctx.regs;
+	if (!access_ok(VERIFY_READ, sr, sizeof(*sr))
+	    || restore_user_regs(regs, sr, 1))
+		goto badframe;
+
+	sigreturn_exit(regs);		/* doesn't return */
+	return 0;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ */
+int do_signal(sigset_t *oldset, struct pt_regs *regs)
+{
+	siginfo_t info;
+	struct k_sigaction ka;
+	unsigned long frame, newsp;
+	int signr, ret;
+
+	if (current->flags & PF_FREEZE) {
+		refrigerator(PF_FREEZE);
+		signr = 0;
+		ret = regs->gpr[3];
+		if (!signal_pending(current))
+			goto no_signal;
+	}
+
+	if (!oldset)
+		oldset = &current->blocked;
+
+	newsp = frame = 0;
+
+	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+
+	if (TRAP(regs) == 0x0C00		/* System Call! */
+	    && regs->ccr & 0x10000000		/* error signalled */
+	    && ((ret = regs->gpr[3]) == ERESTARTSYS
+		|| ret == ERESTARTNOHAND || ret == ERESTARTNOINTR
+		|| ret == ERESTART_RESTARTBLOCK)) {
+
+		if (signr > 0
+		    && (ret == ERESTARTNOHAND || ret == ERESTART_RESTARTBLOCK
+			|| (ret == ERESTARTSYS
+			    && !(ka.sa.sa_flags & SA_RESTART)))) {
+			/* make the system call return an EINTR error */
+			regs->result = -EINTR;
+			regs->gpr[3] = EINTR;
+			/* note that the cr0.SO bit is already set */
+		} else {
+no_signal:
+			regs->nip -= 4;	/* Back up & retry system call */
+			regs->result = 0;
+			regs->trap = 0;
+			if (ret == ERESTART_RESTARTBLOCK)
+				regs->gpr[0] = __NR_restart_syscall;
+			else
+				regs->gpr[3] = regs->orig_gpr3;
+		}
+	}
+
+	if (signr == 0)
+		return 0;		/* no signals delivered */
+
+	if ((ka.sa.sa_flags & SA_ONSTACK) && current->sas_ss_size
+	    && !on_sig_stack(regs->gpr[1]))
+		newsp = current->sas_ss_sp + current->sas_ss_size;
+	else
+		newsp = regs->gpr[1];
+	newsp &= ~0xfUL;
+
+	/* Whee!  Actually deliver the signal.  */
+	if (ka.sa.sa_flags & SA_SIGINFO)
+		handle_rt_signal(signr, &ka, &info, oldset, regs, newsp);
+	else
+		handle_signal(signr, &ka, &info, oldset, regs, newsp);
+
+	if (!(ka.sa.sa_flags & SA_NODEFER)) {
+		spin_lock_irq(&current->sighand->siglock);
+		sigorsets(&current->blocked,&current->blocked,&ka.sa.sa_mask);
+		sigaddset(&current->blocked, signr);
+		recalc_sigpending();
+		spin_unlock_irq(&current->sighand->siglock);
+	}
+
+	return 1;
+}
+
diff --git a/arch/ppc/kernel/smp-tbsync.c b/arch/ppc/kernel/smp-tbsync.c
new file mode 100644
index 00000000000..2c9cd95bcea
--- /dev/null
+++ b/arch/ppc/kernel/smp-tbsync.c
@@ -0,0 +1,181 @@
+/*
+ * Smp timebase synchronization for ppc.
+ *
+ * Copyright (C) 2003 Samuel Rydh (samuel@ibrium.se)
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/unistd.h>
+#include <linux/init.h>
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/time.h>
+
+#define NUM_ITER		300
+
+enum {
+	kExit=0, kSetAndTest, kTest
+};
+
+static struct {
+	volatile int		tbu;
+	volatile int		tbl;
+	volatile int		mark;
+	volatile int		cmd;
+	volatile int		handshake;
+	int			filler[3];
+
+	volatile int		ack;
+	int			filler2[7];
+
+	volatile int		race_result;
+} *tbsync;
+
+static volatile int		running;
+
+static void __devinit
+enter_contest( int mark, int add )
+{
+	while( (int)(get_tbl() - mark) < 0 )
+		tbsync->race_result = add;
+}
+
+void __devinit
+smp_generic_take_timebase( void )
+{
+	int cmd, tbl, tbu;
+
+	local_irq_disable();
+	while( !running )
+		;
+	rmb();
+
+	for( ;; ) {
+		tbsync->ack = 1;
+		while( !tbsync->handshake )
+			;
+		rmb();
+
+		cmd = tbsync->cmd;
+		tbl = tbsync->tbl;
+		tbu = tbsync->tbu;
+		tbsync->ack = 0;
+		if( cmd == kExit )
+			return;
+
+		if( cmd == kSetAndTest ) {
+			while( tbsync->handshake )
+				;
+			asm volatile ("mttbl %0" :: "r" (tbl) );
+			asm volatile ("mttbu %0" :: "r" (tbu) );
+		} else {
+			while( tbsync->handshake )
+				;
+		}
+		enter_contest( tbsync->mark, -1 );
+	}
+	local_irq_enable();
+}
+
+static int __devinit
+start_contest( int cmd, int offset, int num )
+{
+	int i, tbu, tbl, mark, score=0;
+
+	tbsync->cmd = cmd;
+
+	local_irq_disable();
+	for( i=-3; i<num; ) {
+		tbl = get_tbl() + 400;
+		tbsync->tbu = tbu = get_tbu();
+		tbsync->tbl = tbl + offset;
+		tbsync->mark = mark = tbl + 400;
+
+		wmb();
+
+		tbsync->handshake = 1;
+		while( tbsync->ack )
+			;
+
+		while( (int)(get_tbl() - tbl) <= 0 )
+			;
+		tbsync->handshake = 0;
+		enter_contest( mark, 1 );
+
+		while( !tbsync->ack )
+			;
+
+		if( tbsync->tbu != get_tbu() || ((tbsync->tbl ^ get_tbl()) & 0x80000000) )
+			continue;
+		if( i++ > 0 )
+			score += tbsync->race_result;
+	}
+	local_irq_enable();
+	return score;
+}
+
+void __devinit
+smp_generic_give_timebase( void )
+{
+	int i, score, score2, old, min=0, max=5000, offset=1000;
+
+	printk("Synchronizing timebase\n");
+
+	/* if this fails then this kernel won't work anyway... */
+	tbsync = kmalloc( sizeof(*tbsync), GFP_KERNEL );
+	memset( tbsync, 0, sizeof(*tbsync) );
+	mb();
+	running = 1;
+
+	while( !tbsync->ack )
+		;
+
+	/* binary search */
+	for( old=-1 ; old != offset ; offset=(min+max)/2 ) {
+		score = start_contest( kSetAndTest, offset, NUM_ITER );
+
+		printk("score %d, offset %d\n", score, offset );
+
+		if( score > 0 )
+			max = offset;
+		else
+			min = offset;
+		old = offset;
+	}
+	score = start_contest( kSetAndTest, min, NUM_ITER );
+	score2 = start_contest( kSetAndTest, max, NUM_ITER );
+
+	printk( "Min %d (score %d), Max %d (score %d)\n", min, score, max, score2 );
+	score = abs( score );
+	score2 = abs( score2 );
+	offset = (score < score2) ? min : max;
+
+	/* guard against inaccurate mttb */
+	for( i=0; i<10; i++ ) {
+		start_contest( kSetAndTest, offset, NUM_ITER/10 );
+
+		if( (score2=start_contest(kTest, offset, NUM_ITER)) < 0 )
+			score2 = -score2;
+		if( score2 <= score || score2 < 20 )
+			break;
+	}
+	printk("Final offset: %d (%d/%d)\n", offset, score2, NUM_ITER );
+
+	/* exiting */
+	tbsync->cmd = kExit;
+	wmb();
+	tbsync->handshake = 1;
+	while( tbsync->ack )
+		;
+	tbsync->handshake = 0;
+	kfree( tbsync );
+	tbsync = NULL;
+	running = 0;
+
+	/* all done */
+	smp_tb_synchronized = 1;
+}
diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c
new file mode 100644
index 00000000000..e70b587b9e5
--- /dev/null
+++ b/arch/ppc/kernel/smp.c
@@ -0,0 +1,399 @@
+/*
+ * Smp support for ppc.
+ *
+ * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great
+ * deal of code from the sparc and intel versions.
+ *
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+
+#include <asm/ptrace.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/smp.h>
+#include <asm/residual.h>
+#include <asm/time.h>
+#include <asm/thread_info.h>
+#include <asm/tlbflush.h>
+#include <asm/xmon.h>
+
+volatile int smp_commenced;
+int smp_tb_synchronized;
+struct cpuinfo_PPC cpu_data[NR_CPUS];
+struct klock_info_struct klock_info = { KLOCK_CLEAR, 0 };
+atomic_t ipi_recv;
+atomic_t ipi_sent;
+cpumask_t cpu_online_map;
+cpumask_t cpu_possible_map;
+int smp_hw_index[NR_CPUS];
+struct thread_info *secondary_ti;
+
+EXPORT_SYMBOL(cpu_online_map);
+EXPORT_SYMBOL(cpu_possible_map);
+
+/* SMP operations for this machine */
+static struct smp_ops_t *smp_ops;
+
+/* all cpu mappings are 1-1 -- Cort */
+volatile unsigned long cpu_callin_map[NR_CPUS];
+
+int start_secondary(void *);
+void smp_call_function_interrupt(void);
+static int __smp_call_function(void (*func) (void *info), void *info,
+			       int wait, int target);
+
+/* Low level assembly function used to backup CPU 0 state */
+extern void __save_cpu_setup(void);
+
+/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
+ *
+ * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up
+ * in /proc/interrupts will be wrong!!! --Troy */
+#define PPC_MSG_CALL_FUNCTION	0
+#define PPC_MSG_RESCHEDULE	1
+#define PPC_MSG_INVALIDATE_TLB	2
+#define PPC_MSG_XMON_BREAK	3
+
+static inline void
+smp_message_pass(int target, int msg, unsigned long data, int wait)
+{
+	if (smp_ops){
+		atomic_inc(&ipi_sent);
+		smp_ops->message_pass(target,msg,data,wait);
+	}
+}
+
+/*
+ * Common functions
+ */
+void smp_message_recv(int msg, struct pt_regs *regs)
+{
+	atomic_inc(&ipi_recv);
+
+	switch( msg ) {
+	case PPC_MSG_CALL_FUNCTION:
+		smp_call_function_interrupt();
+		break;
+	case PPC_MSG_RESCHEDULE:
+		set_need_resched();
+		break;
+	case PPC_MSG_INVALIDATE_TLB:
+		_tlbia();
+		break;
+#ifdef CONFIG_XMON
+	case PPC_MSG_XMON_BREAK:
+		xmon(regs);
+		break;
+#endif /* CONFIG_XMON */
+	default:
+		printk("SMP %d: smp_message_recv(): unknown msg %d\n",
+		       smp_processor_id(), msg);
+		break;
+	}
+}
+
+/*
+ * 750's don't broadcast tlb invalidates so
+ * we have to emulate that behavior.
+ *   -- Cort
+ */
+void smp_send_tlb_invalidate(int cpu)
+{
+	if ( PVR_VER(mfspr(SPRN_PVR)) == 8 )
+		smp_message_pass(MSG_ALL_BUT_SELF, PPC_MSG_INVALIDATE_TLB, 0, 0);
+}
+
+void smp_send_reschedule(int cpu)
+{
+	/*
+	 * This is only used if `cpu' is running an idle task,
+	 * so it will reschedule itself anyway...
+	 *
+	 * This isn't the case anymore since the other CPU could be
+	 * sleeping and won't reschedule until the next interrupt (such
+	 * as the timer).
+	 *  -- Cort
+	 */
+	/* This is only used if `cpu' is running an idle task,
+	   so it will reschedule itself anyway... */
+	smp_message_pass(cpu, PPC_MSG_RESCHEDULE, 0, 0);
+}
+
+#ifdef CONFIG_XMON
+void smp_send_xmon_break(int cpu)
+{
+	smp_message_pass(cpu, PPC_MSG_XMON_BREAK, 0, 0);
+}
+#endif /* CONFIG_XMON */
+
+static void stop_this_cpu(void *dummy)
+{
+	local_irq_disable();
+	while (1)
+		;
+}
+
+void smp_send_stop(void)
+{
+	smp_call_function(stop_this_cpu, NULL, 1, 0);
+}
+
+/*
+ * Structure and data for smp_call_function(). This is designed to minimise
+ * static memory requirements. It also looks cleaner.
+ * Stolen from the i386 version.
+ */
+static DEFINE_SPINLOCK(call_lock);
+
+static struct call_data_struct {
+	void (*func) (void *info);
+	void *info;
+	atomic_t started;
+	atomic_t finished;
+	int wait;
+} *call_data;
+
+/*
+ * this function sends a 'generic call function' IPI to all other CPUs
+ * in the system.
+ */
+
+int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
+		      int wait)
+/*
+ * [SUMMARY] Run a function on all other CPUs.
+ * <func> The function to run. This must be fast and non-blocking.
+ * <info> An arbitrary pointer to pass to the function.
+ * <nonatomic> currently unused.
+ * <wait> If true, wait (atomically) until function has completed on other CPUs.
+ * [RETURNS] 0 on success, else a negative status code. Does not return until
+ * remote CPUs are nearly ready to execute <<func>> or are or have executed.
+ *
+ * You must not call this function with disabled interrupts or from a
+ * hardware interrupt handler or from a bottom half handler.
+ */
+{
+	/* FIXME: get cpu lock with hotplug cpus, or change this to
+           bitmask. --RR */
+	if (num_online_cpus() <= 1)
+		return 0;
+	/* Can deadlock when called with interrupts disabled */
+	WARN_ON(irqs_disabled());
+	return __smp_call_function(func, info, wait, MSG_ALL_BUT_SELF);
+}
+
+static int __smp_call_function(void (*func) (void *info), void *info,
+			       int wait, int target)
+{
+	struct call_data_struct data;
+	int ret = -1;
+	int timeout;
+	int ncpus = 1;
+
+	if (target == MSG_ALL_BUT_SELF)
+		ncpus = num_online_cpus() - 1;
+	else if (target == MSG_ALL)
+		ncpus = num_online_cpus();
+
+	data.func = func;
+	data.info = info;
+	atomic_set(&data.started, 0);
+	data.wait = wait;
+	if (wait)
+		atomic_set(&data.finished, 0);
+
+	spin_lock(&call_lock);
+	call_data = &data;
+	/* Send a message to all other CPUs and wait for them to respond */
+	smp_message_pass(target, PPC_MSG_CALL_FUNCTION, 0, 0);
+
+	/* Wait for response */
+	timeout = 1000000;
+	while (atomic_read(&data.started) != ncpus) {
+		if (--timeout == 0) {
+			printk("smp_call_function on cpu %d: other cpus not responding (%d)\n",
+			       smp_processor_id(), atomic_read(&data.started));
+			goto out;
+		}
+		barrier();
+		udelay(1);
+	}
+
+	if (wait) {
+		timeout = 1000000;
+		while (atomic_read(&data.finished) != ncpus) {
+			if (--timeout == 0) {
+				printk("smp_call_function on cpu %d: other cpus not finishing (%d/%d)\n",
+				       smp_processor_id(), atomic_read(&data.finished), atomic_read(&data.started));
+				goto out;
+			}
+			barrier();
+			udelay(1);
+		}
+	}
+	ret = 0;
+
+ out:
+	spin_unlock(&call_lock);
+	return ret;
+}
+
+void smp_call_function_interrupt(void)
+{
+	void (*func) (void *info) = call_data->func;
+	void *info = call_data->info;
+	int wait = call_data->wait;
+
+	/*
+	 * Notify initiating CPU that I've grabbed the data and am
+	 * about to execute the function
+	 */
+	atomic_inc(&call_data->started);
+	/*
+	 * At this point the info structure may be out of scope unless wait==1
+	 */
+	(*func)(info);
+	if (wait)
+		atomic_inc(&call_data->finished);
+}
+
+static void __devinit smp_store_cpu_info(int id)
+{
+        struct cpuinfo_PPC *c = &cpu_data[id];
+
+	/* assume bogomips are same for everything */
+        c->loops_per_jiffy = loops_per_jiffy;
+        c->pvr = mfspr(SPRN_PVR);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	int num_cpus, i;
+
+	/* Fixup boot cpu */
+        smp_store_cpu_info(smp_processor_id());
+	cpu_callin_map[smp_processor_id()] = 1;
+
+	smp_ops = ppc_md.smp_ops;
+	if (smp_ops == NULL) {
+		printk("SMP not supported on this machine.\n");
+		return;
+	}
+
+	/* Probe platform for CPUs: always linear. */
+	num_cpus = smp_ops->probe();
+	for (i = 0; i < num_cpus; ++i)
+		cpu_set(i, cpu_possible_map);
+
+	/* Backup CPU 0 state */
+	__save_cpu_setup();
+
+	if (smp_ops->space_timers)
+		smp_ops->space_timers(num_cpus);
+}
+
+void __devinit smp_prepare_boot_cpu(void)
+{
+	cpu_set(smp_processor_id(), cpu_online_map);
+	cpu_set(smp_processor_id(), cpu_possible_map);
+}
+
+int __init setup_profiling_timer(unsigned int multiplier)
+{
+	return 0;
+}
+
+/* Processor coming up starts here */
+int __devinit start_secondary(void *unused)
+{
+	int cpu;
+
+	atomic_inc(&init_mm.mm_count);
+	current->active_mm = &init_mm;
+
+	cpu = smp_processor_id();
+        smp_store_cpu_info(cpu);
+	set_dec(tb_ticks_per_jiffy);
+	cpu_callin_map[cpu] = 1;
+
+	printk("CPU %i done callin...\n", cpu);
+	smp_ops->setup_cpu(cpu);
+	printk("CPU %i done setup...\n", cpu);
+	local_irq_enable();
+	smp_ops->take_timebase();
+	printk("CPU %i done timebase take...\n", cpu);
+
+	cpu_idle();
+	return 0;
+}
+
+int __cpu_up(unsigned int cpu)
+{
+	struct task_struct *p;
+	char buf[32];
+	int c;
+
+	/* create a process for the processor */
+	/* only regs.msr is actually used, and 0 is OK for it */
+	p = fork_idle(cpu);
+	if (IS_ERR(p))
+		panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
+	secondary_ti = p->thread_info;
+	p->thread_info->cpu = cpu;
+
+	/*
+	 * There was a cache flush loop here to flush the cache
+	 * to memory for the first 8MB of RAM.  The cache flush
+	 * has been pushed into the kick_cpu function for those
+	 * platforms that need it.
+	 */
+
+	/* wake up cpu */
+	smp_ops->kick_cpu(cpu);
+	
+	/*
+	 * wait to see if the cpu made a callin (is actually up).
+	 * use this value that I found through experimentation.
+	 * -- Cort
+	 */
+	for (c = 1000; c && !cpu_callin_map[cpu]; c--)
+		udelay(100);
+
+	if (!cpu_callin_map[cpu]) {
+		sprintf(buf, "didn't find cpu %u", cpu);
+		if (ppc_md.progress) ppc_md.progress(buf, 0x360+cpu);
+		printk("Processor %u is stuck.\n", cpu);
+		return -ENOENT;
+	}
+
+	sprintf(buf, "found cpu %u", cpu);
+	if (ppc_md.progress) ppc_md.progress(buf, 0x350+cpu);
+	printk("Processor %d found.\n", cpu);
+
+	smp_ops->give_timebase();
+	cpu_set(cpu, cpu_online_map);
+	return 0;
+}
+
+void smp_cpus_done(unsigned int max_cpus)
+{
+	smp_ops->setup_cpu(0);
+}
diff --git a/arch/ppc/kernel/softemu8xx.c b/arch/ppc/kernel/softemu8xx.c
new file mode 100644
index 00000000000..9bbb6bf7b64
--- /dev/null
+++ b/arch/ppc/kernel/softemu8xx.c
@@ -0,0 +1,147 @@
+/*
+ * Software emulation of some PPC instructions for the 8xx core.
+ *
+ * Copyright (C) 1998 Dan Malek (dmalek@jlc.net)
+ *
+ * Software floating emuation for the MPC8xx processor.  I did this mostly
+ * because it was easier than trying to get the libraries compiled for
+ * software floating point.  The goal is still to get the libraries done,
+ * but I lost patience and needed some hacks to at least get init and
+ * shells running.  The first problem is the setjmp/longjmp that save
+ * and restore the floating point registers.
+ *
+ * For this emulation, our working registers are found on the register
+ * save area.
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/interrupt.h>
+
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+
+extern void
+print_8xx_pte(struct mm_struct *mm, unsigned long addr);
+extern int
+get_8xx_pte(struct mm_struct *mm, unsigned long addr);
+
+/* Eventually we may need a look-up table, but this works for now.
+*/
+#define LFS	48
+#define LFD	50
+#define LFDU	51
+#define STFD	54
+#define STFDU	55
+#define FMR	63
+
+/*
+ * We return 0 on success, 1 on unimplemented instruction, and EFAULT
+ * if a load/store faulted.
+ */
+int
+Soft_emulate_8xx(struct pt_regs *regs)
+{
+	uint	inst, instword;
+	uint	flreg, idxreg, disp;
+	uint	retval;
+	signed short sdisp;
+	uint	*ea, *ip;
+
+	retval = 0;
+
+	instword = *((uint *)regs->nip);
+	inst = instword >> 26;
+
+	flreg = (instword >> 21) & 0x1f;
+	idxreg = (instword >> 16) & 0x1f;
+	disp = instword & 0xffff;
+
+	ea = (uint *)(regs->gpr[idxreg] + disp);
+	ip = (uint *)&current->thread.fpr[flreg];
+
+	switch ( inst )
+	{
+	case LFD:
+		/* this is a 16 bit quantity that is sign extended
+		 * so use a signed short here -- Cort
+		 */
+		sdisp = (instword & 0xffff);
+		ea = (uint *)(regs->gpr[idxreg] + sdisp);
+		if (copy_from_user(ip, ea, sizeof(double)))
+			retval = -EFAULT;
+		break;
+		
+	case LFDU:
+		if (copy_from_user(ip, ea, sizeof(double)))
+			retval = -EFAULT;
+		else
+			regs->gpr[idxreg] = (uint)ea;
+		break;
+	case LFS:
+		sdisp = (instword & 0xffff);
+		ea = (uint *)(regs->gpr[idxreg] + sdisp);
+		if (copy_from_user(ip, ea, sizeof(float)))
+			retval = -EFAULT;
+		break;
+	case STFD:
+		/* this is a 16 bit quantity that is sign extended
+		 * so use a signed short here -- Cort
+		 */
+		sdisp = (instword & 0xffff);
+		ea = (uint *)(regs->gpr[idxreg] + sdisp);
+		if (copy_to_user(ea, ip, sizeof(double)))
+			retval = -EFAULT;
+		break;
+
+	case STFDU:
+		if (copy_to_user(ea, ip, sizeof(double)))
+			retval = -EFAULT;
+		else
+			regs->gpr[idxreg] = (uint)ea;
+		break;
+	case FMR:
+		/* assume this is a fp move -- Cort */
+		memcpy( ip, &current->thread.fpr[(instword>>11)&0x1f],
+			sizeof(double) );
+		break;
+	default:
+		retval = 1;
+		printk("Bad emulation %s/%d\n"
+		       " NIP: %08lx instruction: %08x opcode: %x "
+		       "A: %x B: %x C: %x code: %x rc: %x\n",
+		       current->comm,current->pid,
+		       regs->nip,
+		       instword,inst,
+		       (instword>>16)&0x1f,
+		       (instword>>11)&0x1f,
+		       (instword>>6)&0x1f,
+		       (instword>>1)&0x3ff,
+		       instword&1);
+		{
+			int pa;
+			print_8xx_pte(current->mm,regs->nip);
+			pa = get_8xx_pte(current->mm,regs->nip) & PAGE_MASK;
+			pa |= (regs->nip & ~PAGE_MASK);
+			pa = (unsigned long)__va(pa);
+			printk("Kernel VA for NIP %x ", pa);
+			print_8xx_pte(current->mm,pa);
+		}
+		
+	}
+
+	if (retval == 0)
+		regs->nip += 4;
+	return(retval);
+}
+
diff --git a/arch/ppc/kernel/swsusp.S b/arch/ppc/kernel/swsusp.S
new file mode 100644
index 00000000000..55148bb88d3
--- /dev/null
+++ b/arch/ppc/kernel/swsusp.S
@@ -0,0 +1,349 @@
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/offsets.h>
+
+
+/*
+ * Structure for storing CPU registers on the save area.
+ */
+#define SL_SP		0
+#define SL_PC		4
+#define SL_MSR		8
+#define SL_SDR1		0xc
+#define SL_SPRG0	0x10	/* 4 sprg's */
+#define SL_DBAT0	0x20
+#define SL_IBAT0	0x28
+#define SL_DBAT1	0x30
+#define SL_IBAT1	0x38
+#define SL_DBAT2	0x40
+#define SL_IBAT2	0x48
+#define SL_DBAT3	0x50
+#define SL_IBAT3	0x58
+#define SL_TB		0x60
+#define SL_R2		0x68
+#define SL_CR		0x6c
+#define SL_LR		0x70
+#define SL_R12		0x74	/* r12 to r31 */
+#define SL_SIZE		(SL_R12 + 80)
+
+	.section .data
+	.align	5
+
+_GLOBAL(swsusp_save_area)
+	.space	SL_SIZE
+
+
+	.section .text
+	.align	5
+
+_GLOBAL(swsusp_arch_suspend)
+
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+
+	mflr	r0
+	stw	r0,SL_LR(r11)
+	mfcr	r0
+	stw	r0,SL_CR(r11)
+	stw	r1,SL_SP(r11)
+	stw	r2,SL_R2(r11)
+	stmw	r12,SL_R12(r11)
+
+	/* Save MSR & SDR1 */
+	mfmsr	r4
+	stw	r4,SL_MSR(r11)
+	mfsdr1	r4
+	stw	r4,SL_SDR1(r11)
+
+	/* Get a stable timebase and save it */
+1:	mftbu	r4
+	stw	r4,SL_TB(r11)
+	mftb	r5
+	stw	r5,SL_TB+4(r11)
+	mftbu	r3
+	cmpw	r3,r4
+	bne	1b
+
+	/* Save SPRGs */
+	mfsprg	r4,0
+	stw	r4,SL_SPRG0(r11)
+	mfsprg	r4,1
+	stw	r4,SL_SPRG0+4(r11)
+	mfsprg	r4,2
+	stw	r4,SL_SPRG0+8(r11)
+	mfsprg	r4,3
+	stw	r4,SL_SPRG0+12(r11)
+
+	/* Save BATs */
+	mfdbatu	r4,0
+	stw	r4,SL_DBAT0(r11)
+	mfdbatl	r4,0
+	stw	r4,SL_DBAT0+4(r11)
+	mfdbatu	r4,1
+	stw	r4,SL_DBAT1(r11)
+	mfdbatl	r4,1
+	stw	r4,SL_DBAT1+4(r11)
+	mfdbatu	r4,2
+	stw	r4,SL_DBAT2(r11)
+	mfdbatl	r4,2
+	stw	r4,SL_DBAT2+4(r11)
+	mfdbatu	r4,3
+	stw	r4,SL_DBAT3(r11)
+	mfdbatl	r4,3
+	stw	r4,SL_DBAT3+4(r11)
+	mfibatu	r4,0
+	stw	r4,SL_IBAT0(r11)
+	mfibatl	r4,0
+	stw	r4,SL_IBAT0+4(r11)
+	mfibatu	r4,1
+	stw	r4,SL_IBAT1(r11)
+	mfibatl	r4,1
+	stw	r4,SL_IBAT1+4(r11)
+	mfibatu	r4,2
+	stw	r4,SL_IBAT2(r11)
+	mfibatl	r4,2
+	stw	r4,SL_IBAT2+4(r11)
+	mfibatu	r4,3
+	stw	r4,SL_IBAT3(r11)
+	mfibatl	r4,3
+	stw	r4,SL_IBAT3+4(r11)
+
+#if  0
+	/* Backup various CPU config stuffs */
+	bl	__save_cpu_setup
+#endif
+	/* Call the low level suspend stuff (we should probably have made
+	 * a stackframe...
+	 */
+	bl	swsusp_save
+
+	/* Restore LR from the save area */
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+	lwz	r0,SL_LR(r11)
+	mtlr	r0
+
+	blr
+
+
+/* Resume code */
+_GLOBAL(swsusp_arch_resume)
+
+	/* Stop pending alitvec streams and memory accesses */
+BEGIN_FTR_SECTION
+	DSSALL
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+ 	sync
+
+	/* Disable MSR:DR to make sure we don't take a TLB or
+	 * hash miss during the copy, as our hash table will
+	 * for a while be unuseable. For .text, we assume we are
+	 * covered by a BAT. This works only for non-G5 at this
+	 * point. G5 will need a better approach, possibly using
+	 * a small temporary hash table filled with large mappings,
+	 * disabling the MMU completely isn't a good option for
+	 * performance reasons.
+	 * (Note that 750's may have the same performance issue as
+	 * the G5 in this case, we should investigate using moving
+	 * BATs for these CPUs)
+	 */
+	mfmsr	r0
+	sync
+	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
+	mtmsr	r0
+	sync
+	isync
+
+	/* Load ptr the list of pages to copy in r3 */
+	lis	r11,(pagedir_nosave - KERNELBASE)@h
+	ori	r11,r11,pagedir_nosave@l
+	lwz	r10,0(r11)
+
+	/* Copy the pages. This is a very basic implementation, to
+	 * be replaced by something more cache efficient */
+1:
+	tophys(r3,r10)
+	li	r0,256
+	mtctr	r0
+	lwz	r11,pbe_address(r3)	/* source */
+	tophys(r5,r11)
+	lwz	r10,pbe_orig_address(r3)	/* destination */
+	tophys(r6,r10)
+2:
+	lwz	r8,0(r5)
+	lwz	r9,4(r5)
+	lwz	r10,8(r5)
+	lwz	r11,12(r5)
+	addi	r5,r5,16
+	stw	r8,0(r6)
+	stw	r9,4(r6)
+	stw	r10,8(r6)
+	stw	r11,12(r6)
+	addi	r6,r6,16
+	bdnz	2b
+	lwz		r10,pbe_next(r3)
+	cmpwi	0,r10,0
+	bne	1b
+
+	/* Do a very simple cache flush/inval of the L1 to ensure
+	 * coherency of the icache
+	 */
+	lis	r3,0x0002
+	mtctr	r3
+	li	r3, 0
+1:
+	lwz	r0,0(r3)
+	addi	r3,r3,0x0020
+	bdnz	1b
+	isync
+	sync
+
+	/* Now flush those cache lines */
+	lis	r3,0x0002
+	mtctr	r3
+	li	r3, 0
+1:
+	dcbf	0,r3
+	addi	r3,r3,0x0020
+	bdnz	1b
+	sync
+
+	/* Ok, we are now running with the kernel data of the old
+	 * kernel fully restored. We can get to the save area
+	 * easily now. As for the rest of the code, it assumes the
+	 * loader kernel and the booted one are exactly identical
+	 */
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+	tophys(r11,r11)
+
+#if 0
+	/* Restore various CPU config stuffs */
+	bl	__restore_cpu_setup
+#endif
+	/* Restore the BATs, and SDR1.  Then we can turn on the MMU.
+	 * This is a bit hairy as we are running out of those BATs,
+	 * but first, our code is probably in the icache, and we are
+	 * writing the same value to the BAT, so that should be fine,
+	 * though a better solution will have to be found long-term
+	 */
+	lwz	r4,SL_SDR1(r11)
+	mtsdr1	r4
+	lwz	r4,SL_SPRG0(r11)
+	mtsprg	0,r4
+	lwz	r4,SL_SPRG0+4(r11)
+	mtsprg	1,r4
+	lwz	r4,SL_SPRG0+8(r11)
+	mtsprg	2,r4
+	lwz	r4,SL_SPRG0+12(r11)
+	mtsprg	3,r4
+
+#if 0
+	lwz	r4,SL_DBAT0(r11)
+	mtdbatu	0,r4
+	lwz	r4,SL_DBAT0+4(r11)
+	mtdbatl	0,r4
+	lwz	r4,SL_DBAT1(r11)
+	mtdbatu	1,r4
+	lwz	r4,SL_DBAT1+4(r11)
+	mtdbatl	1,r4
+	lwz	r4,SL_DBAT2(r11)
+	mtdbatu	2,r4
+	lwz	r4,SL_DBAT2+4(r11)
+	mtdbatl	2,r4
+	lwz	r4,SL_DBAT3(r11)
+	mtdbatu	3,r4
+	lwz	r4,SL_DBAT3+4(r11)
+	mtdbatl	3,r4
+	lwz	r4,SL_IBAT0(r11)
+	mtibatu	0,r4
+	lwz	r4,SL_IBAT0+4(r11)
+	mtibatl	0,r4
+	lwz	r4,SL_IBAT1(r11)
+	mtibatu	1,r4
+	lwz	r4,SL_IBAT1+4(r11)
+	mtibatl	1,r4
+	lwz	r4,SL_IBAT2(r11)
+	mtibatu	2,r4
+	lwz	r4,SL_IBAT2+4(r11)
+	mtibatl	2,r4
+	lwz	r4,SL_IBAT3(r11)
+	mtibatu	3,r4
+	lwz	r4,SL_IBAT3+4(r11)
+	mtibatl	3,r4
+#endif
+
+BEGIN_FTR_SECTION
+	li	r4,0
+	mtspr	SPRN_DBAT4U,r4
+	mtspr	SPRN_DBAT4L,r4
+	mtspr	SPRN_DBAT5U,r4
+	mtspr	SPRN_DBAT5L,r4
+	mtspr	SPRN_DBAT6U,r4
+	mtspr	SPRN_DBAT6L,r4
+	mtspr	SPRN_DBAT7U,r4
+	mtspr	SPRN_DBAT7L,r4
+	mtspr	SPRN_IBAT4U,r4
+	mtspr	SPRN_IBAT4L,r4
+	mtspr	SPRN_IBAT5U,r4
+	mtspr	SPRN_IBAT5L,r4
+	mtspr	SPRN_IBAT6U,r4
+	mtspr	SPRN_IBAT6L,r4
+	mtspr	SPRN_IBAT7U,r4
+	mtspr	SPRN_IBAT7L,r4
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
+
+	/* Flush all TLBs */
+	lis	r4,0x1000
+1:	addic.	r4,r4,-0x1000
+	tlbie	r4
+	blt	1b
+	sync
+
+	/* restore the MSR and turn on the MMU */
+	lwz	r3,SL_MSR(r11)
+	bl	turn_on_mmu
+	tovirt(r11,r11)
+
+	/* Restore TB */
+	li	r3,0
+	mttbl	r3
+	lwz	r3,SL_TB(r11)
+	lwz	r4,SL_TB+4(r11)
+	mttbu	r3
+	mttbl	r4
+
+	/* Kick decrementer */
+	li	r0,1
+	mtdec	r0
+
+	/* Restore the callee-saved registers and return */
+	lwz	r0,SL_CR(r11)
+	mtcr	r0
+	lwz	r2,SL_R2(r11)
+	lmw	r12,SL_R12(r11)
+	lwz	r1,SL_SP(r11)
+	lwz	r0,SL_LR(r11)
+	mtlr	r0
+
+	// XXX Note: we don't really need to call swsusp_resume
+
+	li	r3,0
+	blr
+
+/* FIXME:This construct is actually not useful since we don't shut
+ * down the instruction MMU, we could just flip back MSR-DR on.
+ */
+turn_on_mmu:
+	mflr	r4
+	mtsrr0	r4
+	mtsrr1	r3
+	sync
+	isync
+	rfi
+
diff --git a/arch/ppc/kernel/syscalls.c b/arch/ppc/kernel/syscalls.c
new file mode 100644
index 00000000000..124313ce3c0
--- /dev/null
+++ b/arch/ppc/kernel/syscalls.c
@@ -0,0 +1,272 @@
+/*
+ * arch/ppc/kernel/sys_ppc.c
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Derived from "arch/i386/kernel/sys_i386.c"
+ * Adapted from the i386 version by Gary Thomas
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au).
+ *
+ * This file contains various random system calls that
+ * have a non-standard calling sequence on the Linux/PPC
+ * platform.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/syscalls.h>
+#include <linux/mman.h>
+#include <linux/sys.h>
+#include <linux/ipc.h>
+#include <linux/utsname.h>
+#include <linux/file.h>
+#include <linux/unistd.h>
+
+#include <asm/uaccess.h>
+#include <asm/ipc.h>
+#include <asm/semaphore.h>
+
+void
+check_bugs(void)
+{
+}
+
+/*
+ * sys_ipc() is the de-multiplexer for the SysV IPC calls..
+ *
+ * This is really horribly ugly.
+ */
+int
+sys_ipc (uint call, int first, int second, int third, void __user *ptr, long fifth)
+{
+	int version, ret;
+
+	version = call >> 16; /* hack for backward compatibility */
+	call &= 0xffff;
+
+	ret = -ENOSYS;
+	switch (call) {
+	case SEMOP:
+		ret = sys_semtimedop (first, (struct sembuf __user *)ptr,
+				      second, NULL);
+		break;
+	case SEMTIMEDOP:
+		ret = sys_semtimedop (first, (struct sembuf __user *)ptr,
+				      second, (const struct timespec __user *) fifth);
+		break;
+	case SEMGET:
+		ret = sys_semget (first, second, third);
+		break;
+	case SEMCTL: {
+		union semun fourth;
+
+		if (!ptr)
+			break;
+		if ((ret = access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT)
+		    || (ret = get_user(fourth.__pad, (void __user *__user *)ptr)))
+			break;
+		ret = sys_semctl (first, second, third, fourth);
+		break;
+		}
+	case MSGSND:
+		ret = sys_msgsnd (first, (struct msgbuf __user *) ptr, second, third);
+		break;
+	case MSGRCV:
+		switch (version) {
+		case 0: {
+			struct ipc_kludge tmp;
+
+			if (!ptr)
+				break;
+			if ((ret = access_ok(VERIFY_READ, ptr, sizeof(tmp)) ? 0 : -EFAULT)
+			    || (ret = copy_from_user(&tmp,
+					(struct ipc_kludge __user *) ptr,
+					sizeof (tmp)) ? -EFAULT : 0))
+				break;
+			ret = sys_msgrcv (first, tmp.msgp, second, tmp.msgtyp,
+					  third);
+			break;
+			}
+		default:
+			ret = sys_msgrcv (first, (struct msgbuf __user *) ptr,
+					  second, fifth, third);
+			break;
+		}
+		break;
+	case MSGGET:
+		ret = sys_msgget ((key_t) first, second);
+		break;
+	case MSGCTL:
+		ret = sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
+		break;
+	case SHMAT: {
+		ulong raddr;
+
+		if ((ret = access_ok(VERIFY_WRITE, (ulong __user *) third,
+				       sizeof(ulong)) ? 0 : -EFAULT))
+			break;
+		ret = do_shmat (first, (char __user *) ptr, second, &raddr);
+		if (ret)
+			break;
+		ret = put_user (raddr, (ulong __user *) third);
+		break;
+		}
+	case SHMDT:
+		ret = sys_shmdt ((char __user *)ptr);
+		break;
+	case SHMGET:
+		ret = sys_shmget (first, second, third);
+		break;
+	case SHMCTL:
+		ret = sys_shmctl (first, second, (struct shmid_ds __user *) ptr);
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way unix traditionally does this, though.
+ */
+int sys_pipe(int __user *fildes)
+{
+	int fd[2];
+	int error;
+
+	error = do_pipe(fd);
+	if (!error) {
+		if (copy_to_user(fildes, fd, 2*sizeof(int)))
+			error = -EFAULT;
+	}
+	return error;
+}
+
+static inline unsigned long
+do_mmap2(unsigned long addr, size_t len,
+	 unsigned long prot, unsigned long flags,
+	 unsigned long fd, unsigned long pgoff)
+{
+	struct file * file = NULL;
+	int ret = -EBADF;
+
+	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+	if (!(flags & MAP_ANONYMOUS)) {
+		if (!(file = fget(fd)))
+			goto out;
+	}
+
+	down_write(&current->mm->mmap_sem);
+	ret = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+	up_write(&current->mm->mmap_sem);
+	if (file)
+		fput(file);
+out:
+	return ret;
+}
+
+unsigned long sys_mmap2(unsigned long addr, size_t len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff)
+{
+	return do_mmap2(addr, len, prot, flags, fd, pgoff);
+}
+
+unsigned long sys_mmap(unsigned long addr, size_t len,
+		       unsigned long prot, unsigned long flags,
+		       unsigned long fd, off_t offset)
+{
+	int err = -EINVAL;
+
+	if (offset & ~PAGE_MASK)
+		goto out;
+
+	err = do_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+out:
+	return err;
+}
+
+/*
+ * Due to some executables calling the wrong select we sometimes
+ * get wrong args.  This determines how the args are being passed
+ * (a single ptr to them all args passed) then calls
+ * sys_select() with the appropriate args. -- Cort
+ */
+int
+ppc_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, struct timeval __user *tvp)
+{
+	if ( (unsigned long)n >= 4096 )
+	{
+		unsigned long __user *buffer = (unsigned long __user *)n;
+		if (!access_ok(VERIFY_READ, buffer, 5*sizeof(unsigned long))
+		    || __get_user(n, buffer)
+		    || __get_user(inp, ((fd_set __user * __user *)(buffer+1)))
+		    || __get_user(outp, ((fd_set  __user * __user *)(buffer+2)))
+		    || __get_user(exp, ((fd_set  __user * __user *)(buffer+3)))
+		    || __get_user(tvp, ((struct timeval  __user * __user *)(buffer+4))))
+			return -EFAULT;
+	}
+	return sys_select(n, inp, outp, exp, tvp);
+}
+
+int sys_uname(struct old_utsname __user * name)
+{
+	int err = -EFAULT;
+
+	down_read(&uts_sem);
+	if (name && !copy_to_user(name, &system_utsname, sizeof (*name)))
+		err = 0;
+	up_read(&uts_sem);
+	return err;
+}
+
+int sys_olduname(struct oldold_utsname __user * name)
+{
+	int error;
+
+	if (!name)
+		return -EFAULT;
+	if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
+		return -EFAULT;
+
+	down_read(&uts_sem);
+	error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN);
+	error -= __put_user(0,name->sysname+__OLD_UTS_LEN);
+	error -= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN);
+	error -= __put_user(0,name->nodename+__OLD_UTS_LEN);
+	error -= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN);
+	error -= __put_user(0,name->release+__OLD_UTS_LEN);
+	error -= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN);
+	error -= __put_user(0,name->version+__OLD_UTS_LEN);
+	error -= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN);
+	error = __put_user(0,name->machine+__OLD_UTS_LEN);
+	up_read(&uts_sem);
+
+	error = error ? -EFAULT : 0;
+	return error;
+}
+
+/*
+ * We put the arguments in a different order so we only use 6
+ * registers for arguments, rather than 7 as sys_fadvise64_64 needs
+ * (because `offset' goes in r5/r6).
+ */
+long ppc_fadvise64_64(int fd, int advice, loff_t offset, loff_t len)
+{
+	return sys_fadvise64_64(fd, offset, len, advice);
+}
diff --git a/arch/ppc/kernel/temp.c b/arch/ppc/kernel/temp.c
new file mode 100644
index 00000000000..fe8bb634ead
--- /dev/null
+++ b/arch/ppc/kernel/temp.c
@@ -0,0 +1,272 @@
+/*
+ * temp.c	Thermal management for cpu's with Thermal Assist Units
+ *
+ * Written by Troy Benjegerdes <hozer@drgw.net>
+ *
+ * TODO:
+ * dynamic power management to limit peak CPU temp (using ICTC)
+ * calibration???
+ *
+ * Silly, crazy ideas: use cpu load (from scheduler) and ICTC to extend battery
+ * life in portables, and add a 'performance/watt' metric somewhere in /proc
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/reg.h>
+#include <asm/nvram.h>
+#include <asm/cache.h>
+#include <asm/8xx_immap.h>
+#include <asm/machdep.h>
+
+static struct tau_temp
+{
+	int interrupts;
+	unsigned char low;
+	unsigned char high;
+	unsigned char grew;
+} tau[NR_CPUS];
+
+struct timer_list tau_timer;
+
+#undef DEBUG
+
+/* TODO: put these in a /proc interface, with some sanity checks, and maybe
+ * dynamic adjustment to minimize # of interrupts */
+/* configurable values for step size and how much to expand the window when
+ * we get an interrupt. These are based on the limit that was out of range */
+#define step_size		2	/* step size when temp goes out of range */
+#define window_expand		1	/* expand the window by this much */
+/* configurable values for shrinking the window */
+#define shrink_timer	2*HZ	/* period between shrinking the window */
+#define min_window	2	/* minimum window size, degrees C */
+
+void set_thresholds(unsigned long cpu)
+{
+#ifdef CONFIG_TAU_INT
+	/*
+	 * setup THRM1,
+	 * threshold, valid bit, enable interrupts, interrupt when below threshold
+	 */
+	mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID);
+
+	/* setup THRM2,
+	 * threshold, valid bit, enable interrupts, interrupt when above threshhold
+	 */
+	mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE);
+#else
+	/* same thing but don't enable interrupts */
+	mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TID);
+	mtspr(SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V);
+#endif
+}
+
+void TAUupdate(int cpu)
+{
+	unsigned thrm;
+
+#ifdef DEBUG
+	printk("TAUupdate ");
+#endif
+
+	/* if both thresholds are crossed, the step_sizes cancel out
+	 * and the window winds up getting expanded twice. */
+	if((thrm = mfspr(SPRN_THRM1)) & THRM1_TIV){ /* is valid? */
+		if(thrm & THRM1_TIN){ /* crossed low threshold */
+			if (tau[cpu].low >= step_size){
+				tau[cpu].low -= step_size;
+				tau[cpu].high -= (step_size - window_expand);
+			}
+			tau[cpu].grew = 1;
+#ifdef DEBUG
+			printk("low threshold crossed ");
+#endif
+		}
+	}
+	if((thrm = mfspr(SPRN_THRM2)) & THRM1_TIV){ /* is valid? */
+		if(thrm & THRM1_TIN){ /* crossed high threshold */
+			if (tau[cpu].high <= 127-step_size){
+				tau[cpu].low += (step_size - window_expand);
+				tau[cpu].high += step_size;
+			}
+			tau[cpu].grew = 1;
+#ifdef DEBUG
+			printk("high threshold crossed ");
+#endif
+		}
+	}
+
+#ifdef DEBUG
+	printk("grew = %d\n", tau[cpu].grew);
+#endif
+
+#ifndef CONFIG_TAU_INT /* tau_timeout will do this if not using interrupts */
+	set_thresholds(cpu);
+#endif
+
+}
+
+#ifdef CONFIG_TAU_INT
+/*
+ * TAU interrupts - called when we have a thermal assist unit interrupt
+ * with interrupts disabled
+ */
+
+void TAUException(struct pt_regs * regs)
+{
+	int cpu = smp_processor_id();
+
+	irq_enter();
+	tau[cpu].interrupts++;
+
+	TAUupdate(cpu);
+
+	irq_exit();
+}
+#endif /* CONFIG_TAU_INT */
+
+static void tau_timeout(void * info)
+{
+	int cpu;
+	unsigned long flags;
+	int size;
+	int shrink;
+
+	/* disabling interrupts *should* be okay */
+	local_irq_save(flags);
+	cpu = smp_processor_id();
+
+#ifndef CONFIG_TAU_INT
+	TAUupdate(cpu);
+#endif
+
+	size = tau[cpu].high - tau[cpu].low;
+	if (size > min_window && ! tau[cpu].grew) {
+		/* do an exponential shrink of half the amount currently over size */
+		shrink = (2 + size - min_window) / 4;
+		if (shrink) {
+			tau[cpu].low += shrink;
+			tau[cpu].high -= shrink;
+		} else { /* size must have been min_window + 1 */
+			tau[cpu].low += 1;
+#if 1 /* debug */
+			if ((tau[cpu].high - tau[cpu].low) != min_window){
+				printk(KERN_ERR "temp.c: line %d, logic error\n", __LINE__);
+			}
+#endif
+		}
+	}
+
+	tau[cpu].grew = 0;
+
+	set_thresholds(cpu);
+
+	/*
+	 * Do the enable every time, since otherwise a bunch of (relatively)
+	 * complex sleep code needs to be added. One mtspr every time
+	 * tau_timeout is called is probably not a big deal.
+	 *
+	 * Enable thermal sensor and set up sample interval timer
+	 * need 20 us to do the compare.. until a nice 'cpu_speed' function
+	 * call is implemented, just assume a 500 mhz clock. It doesn't really
+	 * matter if we take too long for a compare since it's all interrupt
+	 * driven anyway.
+	 *
+	 * use a extra long time.. (60 us @ 500 mhz)
+	 */
+	mtspr(SPRN_THRM3, THRM3_SITV(500*60) | THRM3_E);
+
+	local_irq_restore(flags);
+}
+
+static void tau_timeout_smp(unsigned long unused)
+{
+
+	/* schedule ourselves to be run again */
+	mod_timer(&tau_timer, jiffies + shrink_timer) ;
+	on_each_cpu(tau_timeout, NULL, 1, 0);
+}
+
+/*
+ * setup the TAU
+ *
+ * Set things up to use THRM1 as a temperature lower bound, and THRM2 as an upper bound.
+ * Start off at zero
+ */
+
+int tau_initialized = 0;
+
+void __init TAU_init_smp(void * info)
+{
+	unsigned long cpu = smp_processor_id();
+
+	/* set these to a reasonable value and let the timer shrink the
+	 * window */
+	tau[cpu].low = 5;
+	tau[cpu].high = 120;
+
+	set_thresholds(cpu);
+}
+
+int __init TAU_init(void)
+{
+	/* We assume in SMP that if one CPU has TAU support, they
+	 * all have it --BenH
+	 */
+	if (!cpu_has_feature(CPU_FTR_TAU)) {
+		printk("Thermal assist unit not available\n");
+		tau_initialized = 0;
+		return 1;
+	}
+
+
+	/* first, set up the window shrinking timer */
+	init_timer(&tau_timer);
+	tau_timer.function = tau_timeout_smp;
+	tau_timer.expires = jiffies + shrink_timer;
+	add_timer(&tau_timer);
+
+	on_each_cpu(TAU_init_smp, NULL, 1, 0);
+
+	printk("Thermal assist unit ");
+#ifdef CONFIG_TAU_INT
+	printk("using interrupts, ");
+#else
+	printk("using timers, ");
+#endif
+	printk("shrink_timer: %d jiffies\n", shrink_timer);
+	tau_initialized = 1;
+
+	return 0;
+}
+
+__initcall(TAU_init);
+
+/*
+ * return current temp
+ */
+
+u32 cpu_temp_both(unsigned long cpu)
+{
+	return ((tau[cpu].high << 16) | tau[cpu].low);
+}
+
+int cpu_temp(unsigned long cpu)
+{
+	return ((tau[cpu].high + tau[cpu].low) / 2);
+}
+
+int tau_interrupts(unsigned long cpu)
+{
+	return (tau[cpu].interrupts);
+}
diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c
new file mode 100644
index 00000000000..50724139402
--- /dev/null
+++ b/arch/ppc/kernel/time.c
@@ -0,0 +1,447 @@
+/*
+ * Common time routines among all ppc machines.
+ *
+ * Written by Cort Dougan (cort@cs.nmt.edu) to merge
+ * Paul Mackerras' version and mine for PReP and Pmac.
+ * MPC8xx/MBX changes by Dan Malek (dmalek@jlc.net).
+ *
+ * First round of bugfixes by Gabriel Paubert (paubert@iram.es)
+ * to make clock more stable (2.4.0-test5). The only thing
+ * that this code assumes is that the timebases have been synchronized
+ * by firmware on SMP and are never stopped (never do sleep
+ * on SMP then, nap and doze are OK).
+ *
+ * TODO (not necessarily in this file):
+ * - improve precision and reproducibility of timebase frequency
+ * measurement at boot time.
+ * - get rid of xtime_lock for gettimeofday (generic kernel problem
+ * to be implemented on all architectures for SMP scalability and
+ * eventually implementing gettimeofday without entering the kernel).
+ * - put all time/clock related variables in a single structure
+ * to minimize number of cache lines touched by gettimeofday()
+ * - for astronomical applications: add a new function to get
+ * non ambiguous timestamps even around leap seconds. This needs
+ * a new timestamp format and a good name.
+ *
+ *
+ * The following comment is partially obsolete (at least the long wait
+ * is no more a valid reason):
+ * Since the MPC8xx has a programmable interrupt timer, I decided to
+ * use that rather than the decrementer.  Two reasons: 1.) the clock
+ * frequency is low, causing 2.) a long wait in the timer interrupt
+ *		while ((d = get_dec()) == dval)
+ * loop.  The MPC8xx can be driven from a variety of input clocks,
+ * so a number of assumptions have been made here because the kernel
+ * parameter HZ is a constant.  We assume (correctly, today :-) that
+ * the MPC8xx on the MBX board is driven from a 32.768 kHz crystal.
+ * This is then divided by 4, providing a 8192 Hz clock into the PIT.
+ * Since it is not possible to get a nice 100 Hz clock out of this, without
+ * creating a software PLL, I have set HZ to 128.  -- Dan
+ *
+ * 1997-09-10  Updated NTP code according to technical memorandum Jan '96
+ *             "A Kernel Model for Precision Timekeeping" by Dave Mills
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/profile.h>
+
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/nvram.h>
+#include <asm/cache.h>
+#include <asm/8xx_immap.h>
+#include <asm/machdep.h>
+
+#include <asm/time.h>
+
+/* XXX false sharing with below? */
+u64 jiffies_64 = INITIAL_JIFFIES;
+
+EXPORT_SYMBOL(jiffies_64);
+
+unsigned long disarm_decr[NR_CPUS];
+
+extern struct timezone sys_tz;
+
+/* keep track of when we need to update the rtc */
+time_t last_rtc_update;
+
+/* The decrementer counts down by 128 every 128ns on a 601. */
+#define DECREMENTER_COUNT_601	(1000000000 / HZ)
+
+unsigned tb_ticks_per_jiffy;
+unsigned tb_to_us;
+unsigned tb_last_stamp;
+unsigned long tb_to_ns_scale;
+
+extern unsigned long wall_jiffies;
+
+static long time_offset;
+
+DEFINE_SPINLOCK(rtc_lock);
+
+EXPORT_SYMBOL(rtc_lock);
+
+/* Timer interrupt helper function */
+static inline int tb_delta(unsigned *jiffy_stamp) {
+	int delta;
+	if (__USE_RTC()) {
+		delta = get_rtcl();
+		if (delta < *jiffy_stamp) *jiffy_stamp -= 1000000000;
+		delta -= *jiffy_stamp;
+	} else {
+		delta = get_tbl() - *jiffy_stamp;
+	}
+	return delta;
+}
+
+#ifdef CONFIG_SMP
+unsigned long profile_pc(struct pt_regs *regs)
+{
+	unsigned long pc = instruction_pointer(regs);
+
+	if (in_lock_functions(pc))
+		return regs->link;
+
+	return pc;
+}
+EXPORT_SYMBOL(profile_pc);
+#endif
+
+/*
+ * timer_interrupt - gets called when the decrementer overflows,
+ * with interrupts disabled.
+ * We set it up to overflow again in 1/HZ seconds.
+ */
+void timer_interrupt(struct pt_regs * regs)
+{
+	int next_dec;
+	unsigned long cpu = smp_processor_id();
+	unsigned jiffy_stamp = last_jiffy_stamp(cpu);
+	extern void do_IRQ(struct pt_regs *);
+
+	if (atomic_read(&ppc_n_lost_interrupts) != 0)
+		do_IRQ(regs);
+
+	irq_enter();
+
+	while ((next_dec = tb_ticks_per_jiffy - tb_delta(&jiffy_stamp)) <= 0) {
+		jiffy_stamp += tb_ticks_per_jiffy;
+		
+		profile_tick(CPU_PROFILING, regs);
+		update_process_times(user_mode(regs));
+
+	  	if (smp_processor_id())
+			continue;
+
+		/* We are in an interrupt, no need to save/restore flags */
+		write_seqlock(&xtime_lock);
+		tb_last_stamp = jiffy_stamp;
+		do_timer(regs);
+
+		/*
+		 * update the rtc when needed, this should be performed on the
+		 * right fraction of a second. Half or full second ?
+		 * Full second works on mk48t59 clocks, others need testing.
+		 * Note that this update is basically only used through
+		 * the adjtimex system calls. Setting the HW clock in
+		 * any other way is a /dev/rtc and userland business.
+		 * This is still wrong by -0.5/+1.5 jiffies because of the
+		 * timer interrupt resolution and possible delay, but here we
+		 * hit a quantization limit which can only be solved by higher
+		 * resolution timers and decoupling time management from timer
+		 * interrupts. This is also wrong on the clocks
+		 * which require being written at the half second boundary.
+		 * We should have an rtc call that only sets the minutes and
+		 * seconds like on Intel to avoid problems with non UTC clocks.
+		 */
+		if ( ppc_md.set_rtc_time && (time_status & STA_UNSYNC) == 0 &&
+		     xtime.tv_sec - last_rtc_update >= 659 &&
+		     abs((xtime.tv_nsec / 1000) - (1000000-1000000/HZ)) < 500000/HZ &&
+		     jiffies - wall_jiffies == 1) {
+		  	if (ppc_md.set_rtc_time(xtime.tv_sec+1 + time_offset) == 0)
+				last_rtc_update = xtime.tv_sec+1;
+			else
+				/* Try again one minute later */
+				last_rtc_update += 60;
+		}
+		write_sequnlock(&xtime_lock);
+	}
+	if ( !disarm_decr[smp_processor_id()] )
+		set_dec(next_dec);
+	last_jiffy_stamp(cpu) = jiffy_stamp;
+
+	if (ppc_md.heartbeat && !ppc_md.heartbeat_count--)
+		ppc_md.heartbeat();
+
+	irq_exit();
+}
+
+/*
+ * This version of gettimeofday has microsecond resolution.
+ */
+void do_gettimeofday(struct timeval *tv)
+{
+	unsigned long flags;
+	unsigned long seq;
+	unsigned delta, lost_ticks, usec, sec;
+
+	do {
+		seq = read_seqbegin_irqsave(&xtime_lock, flags);
+		sec = xtime.tv_sec;
+		usec = (xtime.tv_nsec / 1000);
+		delta = tb_ticks_since(tb_last_stamp);
+#ifdef CONFIG_SMP
+		/* As long as timebases are not in sync, gettimeofday can only
+		 * have jiffy resolution on SMP.
+		 */
+		if (!smp_tb_synchronized)
+			delta = 0;
+#endif /* CONFIG_SMP */
+		lost_ticks = jiffies - wall_jiffies;
+	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
+
+	usec += mulhwu(tb_to_us, tb_ticks_per_jiffy * lost_ticks + delta);
+	while (usec >= 1000000) {
+	  	sec++;
+		usec -= 1000000;
+	}
+	tv->tv_sec = sec;
+	tv->tv_usec = usec;
+}
+
+EXPORT_SYMBOL(do_gettimeofday);
+
+int do_settimeofday(struct timespec *tv)
+{
+	time_t wtm_sec, new_sec = tv->tv_sec;
+	long wtm_nsec, new_nsec = tv->tv_nsec;
+	unsigned long flags;
+	int tb_delta;
+
+	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+		return -EINVAL;
+
+	write_seqlock_irqsave(&xtime_lock, flags);
+	/* Updating the RTC is not the job of this code. If the time is
+	 * stepped under NTP, the RTC will be update after STA_UNSYNC
+	 * is cleared. Tool like clock/hwclock either copy the RTC
+	 * to the system time, in which case there is no point in writing
+	 * to the RTC again, or write to the RTC but then they don't call
+	 * settimeofday to perform this operation. Note also that
+	 * we don't touch the decrementer since:
+	 * a) it would lose timer interrupt synchronization on SMP
+	 * (if it is working one day)
+	 * b) it could make one jiffy spuriously shorter or longer
+	 * which would introduce another source of uncertainty potentially
+	 * harmful to relatively short timers.
+	 */
+
+	/* This works perfectly on SMP only if the tb are in sync but
+	 * guarantees an error < 1 jiffy even if they are off by eons,
+	 * still reasonable when gettimeofday resolution is 1 jiffy.
+	 */
+	tb_delta = tb_ticks_since(last_jiffy_stamp(smp_processor_id()));
+	tb_delta += (jiffies - wall_jiffies) * tb_ticks_per_jiffy;
+
+	new_nsec -= 1000 * mulhwu(tb_to_us, tb_delta);
+
+	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec);
+	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec);
+
+	set_normalized_timespec(&xtime, new_sec, new_nsec);
+	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+	/* In case of a large backwards jump in time with NTP, we want the
+	 * clock to be updated as soon as the PLL is again in lock.
+	 */
+	last_rtc_update = new_sec - 658;
+
+	time_adjust = 0;                /* stop active adjtime() */
+	time_status |= STA_UNSYNC;
+	time_state = TIME_ERROR;        /* p. 24, (a) */
+	time_maxerror = NTP_PHASE_LIMIT;
+	time_esterror = NTP_PHASE_LIMIT;
+	write_sequnlock_irqrestore(&xtime_lock, flags);
+	clock_was_set();
+	return 0;
+}
+
+EXPORT_SYMBOL(do_settimeofday);
+
+/* This function is only called on the boot processor */
+void __init time_init(void)
+{
+	time_t sec, old_sec;
+	unsigned old_stamp, stamp, elapsed;
+
+        if (ppc_md.time_init != NULL)
+                time_offset = ppc_md.time_init();
+
+	if (__USE_RTC()) {
+		/* 601 processor: dec counts down by 128 every 128ns */
+		tb_ticks_per_jiffy = DECREMENTER_COUNT_601;
+		/* mulhwu_scale_factor(1000000000, 1000000) is 0x418937 */
+		tb_to_us = 0x418937;
+        } else {
+                ppc_md.calibrate_decr();
+		tb_to_ns_scale = mulhwu(tb_to_us, 1000 << 10);
+	}
+
+	/* Now that the decrementer is calibrated, it can be used in case the
+	 * clock is stuck, but the fact that we have to handle the 601
+	 * makes things more complex. Repeatedly read the RTC until the
+	 * next second boundary to try to achieve some precision.  If there
+	 * is no RTC, we still need to set tb_last_stamp and
+	 * last_jiffy_stamp(cpu 0) to the current stamp.
+	 */
+	stamp = get_native_tbl();
+	if (ppc_md.get_rtc_time) {
+		sec = ppc_md.get_rtc_time();
+		elapsed = 0;
+		do {
+			old_stamp = stamp;
+			old_sec = sec;
+			stamp = get_native_tbl();
+			if (__USE_RTC() && stamp < old_stamp)
+				old_stamp -= 1000000000;
+			elapsed += stamp - old_stamp;
+			sec = ppc_md.get_rtc_time();
+		} while ( sec == old_sec && elapsed < 2*HZ*tb_ticks_per_jiffy);
+		if (sec==old_sec)
+			printk("Warning: real time clock seems stuck!\n");
+		xtime.tv_sec = sec;
+		xtime.tv_nsec = 0;
+		/* No update now, we just read the time from the RTC ! */
+		last_rtc_update = xtime.tv_sec;
+	}
+	last_jiffy_stamp(0) = tb_last_stamp = stamp;
+
+	/* Not exact, but the timer interrupt takes care of this */
+	set_dec(tb_ticks_per_jiffy);
+
+	/* If platform provided a timezone (pmac), we correct the time */
+        if (time_offset) {
+		sys_tz.tz_minuteswest = -time_offset / 60;
+		sys_tz.tz_dsttime = 0;
+		xtime.tv_sec -= time_offset;
+        }
+        set_normalized_timespec(&wall_to_monotonic,
+                                -xtime.tv_sec, -xtime.tv_nsec);
+}
+
+#define FEBRUARY		2
+#define	STARTOFTIME		1970
+#define SECDAY			86400L
+#define SECYR			(SECDAY * 365)
+
+/*
+ * Note: this is wrong for 2100, but our signed 32-bit time_t will
+ * have overflowed long before that, so who cares.  -- paulus
+ */
+#define	leapyear(year)		((year) % 4 == 0)
+#define	days_in_year(a) 	(leapyear(a) ? 366 : 365)
+#define	days_in_month(a) 	(month_days[(a) - 1])
+
+static int month_days[12] = {
+	31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
+};
+
+void to_tm(int tim, struct rtc_time * tm)
+{
+	register int i;
+	register long hms, day, gday;
+
+	gday = day = tim / SECDAY;
+	hms = tim % SECDAY;
+
+	/* Hours, minutes, seconds are easy */
+	tm->tm_hour = hms / 3600;
+	tm->tm_min = (hms % 3600) / 60;
+	tm->tm_sec = (hms % 3600) % 60;
+
+	/* Number of years in days */
+	for (i = STARTOFTIME; day >= days_in_year(i); i++)
+		day -= days_in_year(i);
+	tm->tm_year = i;
+
+	/* Number of months in days left */
+	if (leapyear(tm->tm_year))
+		days_in_month(FEBRUARY) = 29;
+	for (i = 1; day >= days_in_month(i); i++)
+		day -= days_in_month(i);
+	days_in_month(FEBRUARY) = 28;
+	tm->tm_mon = i;
+
+	/* Days are what is left over (+1) from all that. */
+	tm->tm_mday = day + 1;
+
+	/*
+	 * Determine the day of week. Jan. 1, 1970 was a Thursday.
+	 */
+	tm->tm_wday = (gday + 4) % 7;
+}
+
+/* Auxiliary function to compute scaling factors */
+/* Actually the choice of a timebase running at 1/4 the of the bus
+ * frequency giving resolution of a few tens of nanoseconds is quite nice.
+ * It makes this computation very precise (27-28 bits typically) which
+ * is optimistic considering the stability of most processor clock
+ * oscillators and the precision with which the timebase frequency
+ * is measured but does not harm.
+ */
+unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale) {
+	unsigned mlt=0, tmp, err;
+	/* No concern for performance, it's done once: use a stupid
+	 * but safe and compact method to find the multiplier.
+	 */
+	for (tmp = 1U<<31; tmp != 0; tmp >>= 1) {
+		if (mulhwu(inscale, mlt|tmp) < outscale) mlt|=tmp;
+	}
+	/* We might still be off by 1 for the best approximation.
+	 * A side effect of this is that if outscale is too large
+	 * the returned value will be zero.
+	 * Many corner cases have been checked and seem to work,
+	 * some might have been forgotten in the test however.
+	 */
+	err = inscale*(mlt+1);
+	if (err <= inscale/2) mlt++;
+	return mlt;
+}
+
+unsigned long long sched_clock(void)
+{
+	unsigned long lo, hi, hi2;
+	unsigned long long tb;
+
+	if (!__USE_RTC()) {
+		do {
+			hi = get_tbu();
+			lo = get_tbl();
+			hi2 = get_tbu();
+		} while (hi2 != hi);
+		tb = ((unsigned long long) hi << 32) | lo;
+		tb = (tb * tb_to_ns_scale) >> 10;
+	} else {
+		do {
+			hi = get_rtcu();
+			lo = get_rtcl();
+			hi2 = get_rtcu();
+		} while (hi2 != hi);
+		tb = ((unsigned long long) hi) * 1000000000 + lo;
+	}
+	return tb;
+}
diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c
new file mode 100644
index 00000000000..ed5c7acdca7
--- /dev/null
+++ b/arch/ppc/kernel/traps.c
@@ -0,0 +1,886 @@
+/*
+ *  arch/ppc/kernel/traps.c
+ *
+ *  Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ *  Modified by Cort Dougan (cort@cs.nmt.edu)
+ *  and Paul Mackerras (paulus@cs.anu.edu.au)
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/interrupt.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/prctl.h>
+
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/reg.h>
+#include <asm/xmon.h>
+#ifdef CONFIG_PMAC_BACKLIGHT
+#include <asm/backlight.h>
+#endif
+#include <asm/perfmon.h>
+
+#ifdef CONFIG_XMON
+void (*debugger)(struct pt_regs *regs) = xmon;
+int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt;
+int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep;
+int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match;
+int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match;
+void (*debugger_fault_handler)(struct pt_regs *regs);
+#else
+#ifdef CONFIG_KGDB
+void (*debugger)(struct pt_regs *regs);
+int (*debugger_bpt)(struct pt_regs *regs);
+int (*debugger_sstep)(struct pt_regs *regs);
+int (*debugger_iabr_match)(struct pt_regs *regs);
+int (*debugger_dabr_match)(struct pt_regs *regs);
+void (*debugger_fault_handler)(struct pt_regs *regs);
+#else
+#define debugger(regs)			do { } while (0)
+#define debugger_bpt(regs)		0
+#define debugger_sstep(regs)		0
+#define debugger_iabr_match(regs)	0
+#define debugger_dabr_match(regs)	0
+#define debugger_fault_handler		((void (*)(struct pt_regs *))0)
+#endif
+#endif
+
+/*
+ * Trap & Exception support
+ */
+
+DEFINE_SPINLOCK(die_lock);
+
+void die(const char * str, struct pt_regs * fp, long err)
+{
+	static int die_counter;
+	int nl = 0;
+	console_verbose();
+	spin_lock_irq(&die_lock);
+#ifdef CONFIG_PMAC_BACKLIGHT
+	set_backlight_enable(1);
+	set_backlight_level(BACKLIGHT_MAX);
+#endif
+	printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
+#ifdef CONFIG_PREEMPT
+	printk("PREEMPT ");
+	nl = 1;
+#endif
+#ifdef CONFIG_SMP
+	printk("SMP NR_CPUS=%d ", NR_CPUS);
+	nl = 1;
+#endif
+	if (nl)
+		printk("\n");
+	show_regs(fp);
+	spin_unlock_irq(&die_lock);
+	/* do_exit() should take care of panic'ing from an interrupt
+	 * context so we don't handle it here
+	 */
+	do_exit(err);
+}
+
+void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
+{
+	siginfo_t info;
+
+	if (!user_mode(regs)) {
+		debugger(regs);
+		die("Exception in kernel mode", regs, signr);
+	}
+	info.si_signo = signr;
+	info.si_errno = 0;
+	info.si_code = code;
+	info.si_addr = (void __user *) addr;
+	force_sig_info(signr, &info, current);
+}
+
+/*
+ * I/O accesses can cause machine checks on powermacs.
+ * Check if the NIP corresponds to the address of a sync
+ * instruction for which there is an entry in the exception
+ * table.
+ * Note that the 601 only takes a machine check on TEA
+ * (transfer error ack) signal assertion, and does not
+ * set any of the top 16 bits of SRR1.
+ *  -- paulus.
+ */
+static inline int check_io_access(struct pt_regs *regs)
+{
+#ifdef CONFIG_PPC_PMAC
+	unsigned long msr = regs->msr;
+	const struct exception_table_entry *entry;
+	unsigned int *nip = (unsigned int *)regs->nip;
+
+	if (((msr & 0xffff0000) == 0 || (msr & (0x80000 | 0x40000)))
+	    && (entry = search_exception_tables(regs->nip)) != NULL) {
+		/*
+		 * Check that it's a sync instruction, or somewhere
+		 * in the twi; isync; nop sequence that inb/inw/inl uses.
+		 * As the address is in the exception table
+		 * we should be able to read the instr there.
+		 * For the debug message, we look at the preceding
+		 * load or store.
+		 */
+		if (*nip == 0x60000000)		/* nop */
+			nip -= 2;
+		else if (*nip == 0x4c00012c)	/* isync */
+			--nip;
+		if (*nip == 0x7c0004ac || (*nip >> 26) == 3) {
+			/* sync or twi */
+			unsigned int rb;
+
+			--nip;
+			rb = (*nip >> 11) & 0x1f;
+			printk(KERN_DEBUG "%s bad port %lx at %p\n",
+			       (*nip & 0x100)? "OUT to": "IN from",
+			       regs->gpr[rb] - _IO_BASE, nip);
+			regs->msr |= MSR_RI;
+			regs->nip = entry->fixup;
+			return 1;
+		}
+	}
+#endif /* CONFIG_PPC_PMAC */
+	return 0;
+}
+
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+/* On 4xx, the reason for the machine check or program exception
+   is in the ESR. */
+#define get_reason(regs)	((regs)->dsisr)
+#ifndef CONFIG_E500
+#define get_mc_reason(regs)	((regs)->dsisr)
+#else
+#define get_mc_reason(regs)	(mfspr(SPRN_MCSR))
+#endif
+#define REASON_FP		0
+#define REASON_ILLEGAL		ESR_PIL
+#define REASON_PRIVILEGED	ESR_PPR
+#define REASON_TRAP		ESR_PTR
+
+/* single-step stuff */
+#define single_stepping(regs)	(current->thread.dbcr0 & DBCR0_IC)
+#define clear_single_step(regs)	(current->thread.dbcr0 &= ~DBCR0_IC)
+
+#else
+/* On non-4xx, the reason for the machine check or program
+   exception is in the MSR. */
+#define get_reason(regs)	((regs)->msr)
+#define get_mc_reason(regs)	((regs)->msr)
+#define REASON_FP		0x100000
+#define REASON_ILLEGAL		0x80000
+#define REASON_PRIVILEGED	0x40000
+#define REASON_TRAP		0x20000
+
+#define single_stepping(regs)	((regs)->msr & MSR_SE)
+#define clear_single_step(regs)	((regs)->msr &= ~MSR_SE)
+#endif
+
+/*
+ * This is "fall-back" implementation for configurations
+ * which don't provide platform-specific machine check info
+ */
+void __attribute__ ((weak))
+platform_machine_check(struct pt_regs *regs)
+{
+}
+
+void MachineCheckException(struct pt_regs *regs)
+{
+	unsigned long reason = get_mc_reason(regs);
+
+	if (user_mode(regs)) {
+		regs->msr |= MSR_RI;
+		_exception(SIGBUS, regs, BUS_ADRERR, regs->nip);
+		return;
+	}
+
+#if defined(CONFIG_8xx) && defined(CONFIG_PCI)
+	/* the qspan pci read routines can cause machine checks -- Cort */
+	bad_page_fault(regs, regs->dar, SIGBUS);
+	return;
+#endif
+
+	if (debugger_fault_handler) {
+		debugger_fault_handler(regs);
+		regs->msr |= MSR_RI;
+		return;
+	}
+
+	if (check_io_access(regs))
+		return;
+
+#if defined(CONFIG_4xx) && !defined(CONFIG_440A)
+	if (reason & ESR_IMCP) {
+		printk("Instruction");
+		mtspr(SPRN_ESR, reason & ~ESR_IMCP);
+	} else
+		printk("Data");
+	printk(" machine check in kernel mode.\n");
+#elif defined(CONFIG_440A)
+	printk("Machine check in kernel mode.\n");
+	if (reason & ESR_IMCP){
+		printk("Instruction Synchronous Machine Check exception\n");
+		mtspr(SPRN_ESR, reason & ~ESR_IMCP);
+	}
+	else {
+		u32 mcsr = mfspr(SPRN_MCSR);
+		if (mcsr & MCSR_IB)
+			printk("Instruction Read PLB Error\n");
+		if (mcsr & MCSR_DRB)
+			printk("Data Read PLB Error\n");
+		if (mcsr & MCSR_DWB)
+			printk("Data Write PLB Error\n");
+		if (mcsr & MCSR_TLBP)
+			printk("TLB Parity Error\n");
+		if (mcsr & MCSR_ICP){
+			flush_instruction_cache();
+			printk("I-Cache Parity Error\n");
+		}
+		if (mcsr & MCSR_DCSP)
+			printk("D-Cache Search Parity Error\n");
+		if (mcsr & MCSR_DCFP)
+			printk("D-Cache Flush Parity Error\n");
+		if (mcsr & MCSR_IMPE)
+			printk("Machine Check exception is imprecise\n");
+
+		/* Clear MCSR */
+		mtspr(SPRN_MCSR, mcsr);
+	}
+#elif defined (CONFIG_E500)
+	printk("Machine check in kernel mode.\n");
+	printk("Caused by (from MCSR=%lx): ", reason);
+
+	if (reason & MCSR_MCP)
+		printk("Machine Check Signal\n");
+	if (reason & MCSR_ICPERR)
+		printk("Instruction Cache Parity Error\n");
+	if (reason & MCSR_DCP_PERR)
+		printk("Data Cache Push Parity Error\n");
+	if (reason & MCSR_DCPERR)
+		printk("Data Cache Parity Error\n");
+	if (reason & MCSR_GL_CI)
+		printk("Guarded Load or Cache-Inhibited stwcx.\n");
+	if (reason & MCSR_BUS_IAERR)
+		printk("Bus - Instruction Address Error\n");
+	if (reason & MCSR_BUS_RAERR)
+		printk("Bus - Read Address Error\n");
+	if (reason & MCSR_BUS_WAERR)
+		printk("Bus - Write Address Error\n");
+	if (reason & MCSR_BUS_IBERR)
+		printk("Bus - Instruction Data Error\n");
+	if (reason & MCSR_BUS_RBERR)
+		printk("Bus - Read Data Bus Error\n");
+	if (reason & MCSR_BUS_WBERR)
+		printk("Bus - Read Data Bus Error\n");
+	if (reason & MCSR_BUS_IPERR)
+		printk("Bus - Instruction Parity Error\n");
+	if (reason & MCSR_BUS_RPERR)
+		printk("Bus - Read Parity Error\n");
+#else /* !CONFIG_4xx && !CONFIG_E500 */
+	printk("Machine check in kernel mode.\n");
+	printk("Caused by (from SRR1=%lx): ", reason);
+	switch (reason & 0x601F0000) {
+	case 0x80000:
+		printk("Machine check signal\n");
+		break;
+	case 0:		/* for 601 */
+	case 0x40000:
+	case 0x140000:	/* 7450 MSS error and TEA */
+		printk("Transfer error ack signal\n");
+		break;
+	case 0x20000:
+		printk("Data parity error signal\n");
+		break;
+	case 0x10000:
+		printk("Address parity error signal\n");
+		break;
+	case 0x20000000:
+		printk("L1 Data Cache error\n");
+		break;
+	case 0x40000000:
+		printk("L1 Instruction Cache error\n");
+		break;
+	case 0x00100000:
+		printk("L2 data cache parity error\n");
+		break;
+	default:
+		printk("Unknown values in msr\n");
+	}
+#endif /* CONFIG_4xx */
+
+	/*
+	 * Optional platform-provided routine to print out
+	 * additional info, e.g. bus error registers.
+	 */
+	platform_machine_check(regs);
+
+	debugger(regs);
+	die("machine check", regs, SIGBUS);
+}
+
+void SMIException(struct pt_regs *regs)
+{
+	debugger(regs);
+#if !(defined(CONFIG_XMON) || defined(CONFIG_KGDB))
+	show_regs(regs);
+	panic("System Management Interrupt");
+#endif
+}
+
+void UnknownException(struct pt_regs *regs)
+{
+	printk("Bad trap at PC: %lx, MSR: %lx, vector=%lx    %s\n",
+	       regs->nip, regs->msr, regs->trap, print_tainted());
+	_exception(SIGTRAP, regs, 0, 0);
+}
+
+void InstructionBreakpoint(struct pt_regs *regs)
+{
+	if (debugger_iabr_match(regs))
+		return;
+	_exception(SIGTRAP, regs, TRAP_BRKPT, 0);
+}
+
+void RunModeException(struct pt_regs *regs)
+{
+	_exception(SIGTRAP, regs, 0, 0);
+}
+
+/* Illegal instruction emulation support.  Originally written to
+ * provide the PVR to user applications using the mfspr rd, PVR.
+ * Return non-zero if we can't emulate, or -EFAULT if the associated
+ * memory access caused an access fault.  Return zero on success.
+ *
+ * There are a couple of ways to do this, either "decode" the instruction
+ * or directly match lots of bits.  In this case, matching lots of
+ * bits is faster and easier.
+ *
+ */
+#define INST_MFSPR_PVR		0x7c1f42a6
+#define INST_MFSPR_PVR_MASK	0xfc1fffff
+
+#define INST_DCBA		0x7c0005ec
+#define INST_DCBA_MASK		0x7c0007fe
+
+#define INST_MCRXR		0x7c000400
+#define INST_MCRXR_MASK		0x7c0007fe
+
+#define INST_STRING		0x7c00042a
+#define INST_STRING_MASK	0x7c0007fe
+#define INST_STRING_GEN_MASK	0x7c00067e
+#define INST_LSWI		0x7c0004aa
+#define INST_LSWX		0x7c00042a
+#define INST_STSWI		0x7c0005aa
+#define INST_STSWX		0x7c00052a
+
+static int emulate_string_inst(struct pt_regs *regs, u32 instword)
+{
+	u8 rT = (instword >> 21) & 0x1f;
+	u8 rA = (instword >> 16) & 0x1f;
+	u8 NB_RB = (instword >> 11) & 0x1f;
+	u32 num_bytes;
+	u32 EA;
+	int pos = 0;
+
+	/* Early out if we are an invalid form of lswx */
+	if ((instword & INST_STRING_MASK) == INST_LSWX)
+		if ((rA >= rT) || (NB_RB >= rT) || (rT == rA) || (rT == NB_RB))
+			return -EINVAL;
+
+	/* Early out if we are an invalid form of lswi */
+	if ((instword & INST_STRING_MASK) == INST_LSWI)
+		if ((rA >= rT) || (rT == rA))
+			return -EINVAL;
+
+	EA = (rA == 0) ? 0 : regs->gpr[rA];
+
+	switch (instword & INST_STRING_MASK) {
+		case INST_LSWX:
+		case INST_STSWX:
+			EA += NB_RB;
+			num_bytes = regs->xer & 0x7f;
+			break;
+		case INST_LSWI:
+		case INST_STSWI:
+			num_bytes = (NB_RB == 0) ? 32 : NB_RB;
+			break;
+		default:
+			return -EINVAL;
+	}
+
+	while (num_bytes != 0)
+	{
+		u8 val;
+		u32 shift = 8 * (3 - (pos & 0x3));
+
+		switch ((instword & INST_STRING_MASK)) {
+			case INST_LSWX:
+			case INST_LSWI:
+				if (get_user(val, (u8 __user *)EA))
+					return -EFAULT;
+				/* first time updating this reg,
+				 * zero it out */
+				if (pos == 0)
+					regs->gpr[rT] = 0;
+				regs->gpr[rT] |= val << shift;
+				break;
+			case INST_STSWI:
+			case INST_STSWX:
+				val = regs->gpr[rT] >> shift;
+				if (put_user(val, (u8 __user *)EA))
+					return -EFAULT;
+				break;
+		}
+		/* move EA to next address */
+		EA += 1;
+		num_bytes--;
+
+		/* manage our position within the register */
+		if (++pos == 4) {
+			pos = 0;
+			if (++rT == 32)
+				rT = 0;
+		}
+	}
+
+	return 0;
+}
+
+static int emulate_instruction(struct pt_regs *regs)
+{
+	u32 instword;
+	u32 rd;
+
+	if (!user_mode(regs))
+		return -EINVAL;
+	CHECK_FULL_REGS(regs);
+
+	if (get_user(instword, (u32 __user *)(regs->nip)))
+		return -EFAULT;
+
+	/* Emulate the mfspr rD, PVR.
+	 */
+	if ((instword & INST_MFSPR_PVR_MASK) == INST_MFSPR_PVR) {
+		rd = (instword >> 21) & 0x1f;
+		regs->gpr[rd] = mfspr(SPRN_PVR);
+		return 0;
+	}
+
+	/* Emulating the dcba insn is just a no-op.  */
+	if ((instword & INST_DCBA_MASK) == INST_DCBA)
+		return 0;
+
+	/* Emulate the mcrxr insn.  */
+	if ((instword & INST_MCRXR_MASK) == INST_MCRXR) {
+		int shift = (instword >> 21) & 0x1c;
+		unsigned long msk = 0xf0000000UL >> shift;
+
+		regs->ccr = (regs->ccr & ~msk) | ((regs->xer >> shift) & msk);
+		regs->xer &= ~0xf0000000UL;
+		return 0;
+	}
+
+	/* Emulate load/store string insn. */
+	if ((instword & INST_STRING_GEN_MASK) == INST_STRING)
+		return emulate_string_inst(regs, instword);
+
+	return -EINVAL;
+}
+
+/*
+ * After we have successfully emulated an instruction, we have to
+ * check if the instruction was being single-stepped, and if so,
+ * pretend we got a single-step exception.  This was pointed out
+ * by Kumar Gala.  -- paulus
+ */
+static void emulate_single_step(struct pt_regs *regs)
+{
+	if (single_stepping(regs)) {
+		clear_single_step(regs);
+		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
+	}
+}
+
+/*
+ * Look through the list of trap instructions that are used for BUG(),
+ * BUG_ON() and WARN_ON() and see if we hit one.  At this point we know
+ * that the exception was caused by a trap instruction of some kind.
+ * Returns 1 if we should continue (i.e. it was a WARN_ON) or 0
+ * otherwise.
+ */
+extern struct bug_entry __start___bug_table[], __stop___bug_table[];
+
+#ifndef CONFIG_MODULES
+#define module_find_bug(x)	NULL
+#endif
+
+static struct bug_entry *find_bug(unsigned long bugaddr)
+{
+	struct bug_entry *bug;
+
+	for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
+		if (bugaddr == bug->bug_addr)
+			return bug;
+	return module_find_bug(bugaddr);
+}
+
+int check_bug_trap(struct pt_regs *regs)
+{
+	struct bug_entry *bug;
+	unsigned long addr;
+
+	if (regs->msr & MSR_PR)
+		return 0;	/* not in kernel */
+	addr = regs->nip;	/* address of trap instruction */
+	if (addr < PAGE_OFFSET)
+		return 0;
+	bug = find_bug(regs->nip);
+	if (bug == NULL)
+		return 0;
+	if (bug->line & BUG_WARNING_TRAP) {
+		/* this is a WARN_ON rather than BUG/BUG_ON */
+#ifdef CONFIG_XMON
+		xmon_printf(KERN_ERR "Badness in %s at %s:%d\n",
+		       bug->function, bug->file,
+		       bug->line & ~BUG_WARNING_TRAP);
+#endif /* CONFIG_XMON */		
+		printk(KERN_ERR "Badness in %s at %s:%d\n",
+		       bug->function, bug->file,
+		       bug->line & ~BUG_WARNING_TRAP);
+		dump_stack();
+		return 1;
+	}
+#ifdef CONFIG_XMON
+	xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%d!\n",
+	       bug->function, bug->file, bug->line);
+	xmon(regs);
+#endif /* CONFIG_XMON */
+	printk(KERN_CRIT "kernel BUG in %s at %s:%d!\n",
+	       bug->function, bug->file, bug->line);
+
+	return 0;
+}
+
+void ProgramCheckException(struct pt_regs *regs)
+{
+	unsigned int reason = get_reason(regs);
+	extern int do_mathemu(struct pt_regs *regs);
+
+#ifdef CONFIG_MATH_EMULATION
+	/* (reason & REASON_ILLEGAL) would be the obvious thing here,
+	 * but there seems to be a hardware bug on the 405GP (RevD)
+	 * that means ESR is sometimes set incorrectly - either to
+	 * ESR_DST (!?) or 0.  In the process of chasing this with the
+	 * hardware people - not sure if it can happen on any illegal
+	 * instruction or only on FP instructions, whether there is a
+	 * pattern to occurences etc. -dgibson 31/Mar/2003 */
+	if (!(reason & REASON_TRAP) && do_mathemu(regs) == 0) {
+		emulate_single_step(regs);
+		return;
+	}
+#endif /* CONFIG_MATH_EMULATION */
+
+	if (reason & REASON_FP) {
+		/* IEEE FP exception */
+		int code = 0;
+		u32 fpscr;
+
+		/* We must make sure the FP state is consistent with
+		 * our MSR_FP in regs
+		 */
+		preempt_disable();
+		if (regs->msr & MSR_FP)
+			giveup_fpu(current);
+		preempt_enable();
+
+		fpscr = current->thread.fpscr;
+		fpscr &= fpscr << 22;	/* mask summary bits with enables */
+		if (fpscr & FPSCR_VX)
+			code = FPE_FLTINV;
+		else if (fpscr & FPSCR_OX)
+			code = FPE_FLTOVF;
+		else if (fpscr & FPSCR_UX)
+			code = FPE_FLTUND;
+		else if (fpscr & FPSCR_ZX)
+			code = FPE_FLTDIV;
+		else if (fpscr & FPSCR_XX)
+			code = FPE_FLTRES;
+		_exception(SIGFPE, regs, code, regs->nip);
+		return;
+	}
+
+	if (reason & REASON_TRAP) {
+		/* trap exception */
+		if (debugger_bpt(regs))
+			return;
+		if (check_bug_trap(regs)) {
+			regs->nip += 4;
+			return;
+		}
+		_exception(SIGTRAP, regs, TRAP_BRKPT, 0);
+		return;
+	}
+
+	/* Try to emulate it if we should. */
+	if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) {
+		switch (emulate_instruction(regs)) {
+		case 0:
+			regs->nip += 4;
+			emulate_single_step(regs);
+			return;
+		case -EFAULT:
+			_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
+			return;
+		}
+	}
+
+	if (reason & REASON_PRIVILEGED)
+		_exception(SIGILL, regs, ILL_PRVOPC, regs->nip);
+	else
+		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+}
+
+void SingleStepException(struct pt_regs *regs)
+{
+	regs->msr &= ~(MSR_SE | MSR_BE);  /* Turn off 'trace' bits */
+	if (debugger_sstep(regs))
+		return;
+	_exception(SIGTRAP, regs, TRAP_TRACE, 0);
+}
+
+void AlignmentException(struct pt_regs *regs)
+{
+	int fixed;
+
+	fixed = fix_alignment(regs);
+	if (fixed == 1) {
+		regs->nip += 4;	/* skip over emulated instruction */
+		return;
+	}
+	if (fixed == -EFAULT) {
+		/* fixed == -EFAULT means the operand address was bad */
+		if (user_mode(regs))
+			_exception(SIGSEGV, regs, SEGV_ACCERR, regs->dar);
+		else
+			bad_page_fault(regs, regs->dar, SIGSEGV);
+		return;
+	}
+	_exception(SIGBUS, regs, BUS_ADRALN, regs->dar);
+}
+
+void StackOverflow(struct pt_regs *regs)
+{
+	printk(KERN_CRIT "Kernel stack overflow in process %p, r1=%lx\n",
+	       current, regs->gpr[1]);
+	debugger(regs);
+	show_regs(regs);
+	panic("kernel stack overflow");
+}
+
+void nonrecoverable_exception(struct pt_regs *regs)
+{
+	printk(KERN_ERR "Non-recoverable exception at PC=%lx MSR=%lx\n",
+	       regs->nip, regs->msr);
+	debugger(regs);
+	die("nonrecoverable exception", regs, SIGKILL);
+}
+
+void trace_syscall(struct pt_regs *regs)
+{
+	printk("Task: %p(%d), PC: %08lX/%08lX, Syscall: %3ld, Result: %s%ld    %s\n",
+	       current, current->pid, regs->nip, regs->link, regs->gpr[0],
+	       regs->ccr&0x10000000?"Error=":"", regs->gpr[3], print_tainted());
+}
+
+#ifdef CONFIG_8xx
+void SoftwareEmulation(struct pt_regs *regs)
+{
+	extern int do_mathemu(struct pt_regs *);
+	extern int Soft_emulate_8xx(struct pt_regs *);
+	int errcode;
+
+	CHECK_FULL_REGS(regs);
+
+	if (!user_mode(regs)) {
+		debugger(regs);
+		die("Kernel Mode Software FPU Emulation", regs, SIGFPE);
+	}
+
+#ifdef CONFIG_MATH_EMULATION
+	errcode = do_mathemu(regs);
+#else
+	errcode = Soft_emulate_8xx(regs);
+#endif
+	if (errcode) {
+		if (errcode > 0)
+			_exception(SIGFPE, regs, 0, 0);
+		else if (errcode == -EFAULT)
+			_exception(SIGSEGV, regs, 0, 0);
+		else
+			_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+	} else
+		emulate_single_step(regs);
+}
+#endif /* CONFIG_8xx */
+
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+
+void DebugException(struct pt_regs *regs, unsigned long debug_status)
+{
+	if (debug_status & DBSR_IC) {	/* instruction completion */
+		regs->msr &= ~MSR_DE;
+		if (user_mode(regs)) {
+			current->thread.dbcr0 &= ~DBCR0_IC;
+		} else {
+			/* Disable instruction completion */
+			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_IC);
+			/* Clear the instruction completion event */
+			mtspr(SPRN_DBSR, DBSR_IC);
+			if (debugger_sstep(regs))
+				return;
+		}
+		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
+	}
+}
+#endif /* CONFIG_4xx || CONFIG_BOOKE */
+
+#if !defined(CONFIG_TAU_INT)
+void TAUException(struct pt_regs *regs)
+{
+	printk("TAU trap at PC: %lx, MSR: %lx, vector=%lx    %s\n",
+	       regs->nip, regs->msr, regs->trap, print_tainted());
+}
+#endif /* CONFIG_INT_TAU */
+
+void AltivecUnavailException(struct pt_regs *regs)
+{
+	static int kernel_altivec_count;
+
+#ifndef CONFIG_ALTIVEC
+	if (user_mode(regs)) {
+		/* A user program has executed an altivec instruction,
+		   but this kernel doesn't support altivec. */
+		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+		return;
+	}
+#endif
+	/* The kernel has executed an altivec instruction without
+	   first enabling altivec.  Whinge but let it do it. */
+	if (++kernel_altivec_count < 10)
+		printk(KERN_ERR "AltiVec used in kernel (task=%p, pc=%lx)\n",
+		       current, regs->nip);
+	regs->msr |= MSR_VEC;
+}
+
+#ifdef CONFIG_ALTIVEC
+void AltivecAssistException(struct pt_regs *regs)
+{
+	int err;
+
+	preempt_disable();
+	if (regs->msr & MSR_VEC)
+		giveup_altivec(current);
+	preempt_enable();
+
+	err = emulate_altivec(regs);
+	if (err == 0) {
+		regs->nip += 4;		/* skip emulated instruction */
+		emulate_single_step(regs);
+		return;
+	}
+
+	if (err == -EFAULT) {
+		/* got an error reading the instruction */
+		_exception(SIGSEGV, regs, SEGV_ACCERR, regs->nip);
+	} else {
+		/* didn't recognize the instruction */
+		/* XXX quick hack for now: set the non-Java bit in the VSCR */
+		printk(KERN_ERR "unrecognized altivec instruction "
+		       "in %s at %lx\n", current->comm, regs->nip);
+		current->thread.vscr.u[3] |= 0x10000;
+	}
+}
+#endif /* CONFIG_ALTIVEC */
+
+void PerformanceMonitorException(struct pt_regs *regs)
+{
+	perf_irq(regs);
+}
+
+#ifdef CONFIG_FSL_BOOKE
+void CacheLockingException(struct pt_regs *regs, unsigned long address,
+			   unsigned long error_code)
+{
+	/* We treat cache locking instructions from the user
+	 * as priv ops, in the future we could try to do
+	 * something smarter
+	 */
+	if (error_code & (ESR_DLK|ESR_ILK))
+		_exception(SIGILL, regs, ILL_PRVOPC, regs->nip);
+	return;
+}
+#endif /* CONFIG_FSL_BOOKE */
+
+#ifdef CONFIG_SPE
+void SPEFloatingPointException(struct pt_regs *regs)
+{
+	unsigned long spefscr;
+	int fpexc_mode;
+	int code = 0;
+
+	spefscr = current->thread.spefscr;
+	fpexc_mode = current->thread.fpexc_mode;
+
+	/* Hardware does not neccessarily set sticky
+	 * underflow/overflow/invalid flags */
+	if ((spefscr & SPEFSCR_FOVF) && (fpexc_mode & PR_FP_EXC_OVF)) {
+		code = FPE_FLTOVF;
+		spefscr |= SPEFSCR_FOVFS;
+	}
+	else if ((spefscr & SPEFSCR_FUNF) && (fpexc_mode & PR_FP_EXC_UND)) {
+		code = FPE_FLTUND;
+		spefscr |= SPEFSCR_FUNFS;
+	}
+	else if ((spefscr & SPEFSCR_FDBZ) && (fpexc_mode & PR_FP_EXC_DIV))
+		code = FPE_FLTDIV;
+	else if ((spefscr & SPEFSCR_FINV) && (fpexc_mode & PR_FP_EXC_INV)) {
+		code = FPE_FLTINV;
+		spefscr |= SPEFSCR_FINVS;
+	}
+	else if ((spefscr & (SPEFSCR_FG | SPEFSCR_FX)) && (fpexc_mode & PR_FP_EXC_RES))
+		code = FPE_FLTRES;
+
+	current->thread.spefscr = spefscr;
+
+	_exception(SIGFPE, regs, code, regs->nip);
+	return;
+}
+#endif
+
+void __init trap_init(void)
+{
+}
diff --git a/arch/ppc/kernel/vecemu.c b/arch/ppc/kernel/vecemu.c
new file mode 100644
index 00000000000..604d0947cb2
--- /dev/null
+++ b/arch/ppc/kernel/vecemu.c
@@ -0,0 +1,345 @@
+/*
+ * Routines to emulate some Altivec/VMX instructions, specifically
+ * those that can trap when given denormalized operands in Java mode.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+
+/* Functions in vector.S */
+extern void vaddfp(vector128 *dst, vector128 *a, vector128 *b);
+extern void vsubfp(vector128 *dst, vector128 *a, vector128 *b);
+extern void vmaddfp(vector128 *dst, vector128 *a, vector128 *b, vector128 *c);
+extern void vnmsubfp(vector128 *dst, vector128 *a, vector128 *b, vector128 *c);
+extern void vrefp(vector128 *dst, vector128 *src);
+extern void vrsqrtefp(vector128 *dst, vector128 *src);
+extern void vexptep(vector128 *dst, vector128 *src);
+
+static unsigned int exp2s[8] = {
+	0x800000,
+	0x8b95c2,
+	0x9837f0,
+	0xa5fed7,
+	0xb504f3,
+	0xc5672a,
+	0xd744fd,
+	0xeac0c7
+};
+
+/*
+ * Computes an estimate of 2^x.  The `s' argument is the 32-bit
+ * single-precision floating-point representation of x.
+ */
+static unsigned int eexp2(unsigned int s)
+{
+	int exp, pwr;
+	unsigned int mant, frac;
+
+	/* extract exponent field from input */
+	exp = ((s >> 23) & 0xff) - 127;
+	if (exp > 7) {
+		/* check for NaN input */
+		if (exp == 128 && (s & 0x7fffff) != 0)
+			return s | 0x400000;	/* return QNaN */
+		/* 2^-big = 0, 2^+big = +Inf */
+		return (s & 0x80000000)? 0: 0x7f800000;	/* 0 or +Inf */
+	}
+	if (exp < -23)
+		return 0x3f800000;	/* 1.0 */
+
+	/* convert to fixed point integer in 9.23 representation */
+	pwr = (s & 0x7fffff) | 0x800000;
+	if (exp > 0)
+		pwr <<= exp;
+	else
+		pwr >>= -exp;
+	if (s & 0x80000000)
+		pwr = -pwr;
+
+	/* extract integer part, which becomes exponent part of result */
+	exp = (pwr >> 23) + 126;
+	if (exp >= 254)
+		return 0x7f800000;
+	if (exp < -23)
+		return 0;
+
+	/* table lookup on top 3 bits of fraction to get mantissa */
+	mant = exp2s[(pwr >> 20) & 7];
+
+	/* linear interpolation using remaining 20 bits of fraction */
+	asm("mulhwu %0,%1,%2" : "=r" (frac)
+	    : "r" (pwr << 12), "r" (0x172b83ff));
+	asm("mulhwu %0,%1,%2" : "=r" (frac) : "r" (frac), "r" (mant));
+	mant += frac;
+
+	if (exp >= 0)
+		return mant + (exp << 23);
+
+	/* denormalized result */
+	exp = -exp;
+	mant += 1 << (exp - 1);
+	return mant >> exp;
+}
+
+/*
+ * Computes an estimate of log_2(x).  The `s' argument is the 32-bit
+ * single-precision floating-point representation of x.
+ */
+static unsigned int elog2(unsigned int s)
+{
+	int exp, mant, lz, frac;
+
+	exp = s & 0x7f800000;
+	mant = s & 0x7fffff;
+	if (exp == 0x7f800000) {	/* Inf or NaN */
+		if (mant != 0)
+			s |= 0x400000;	/* turn NaN into QNaN */
+		return s;
+	}
+	if ((exp | mant) == 0)		/* +0 or -0 */
+		return 0xff800000;	/* return -Inf */
+
+	if (exp == 0) {
+		/* denormalized */
+		asm("cntlzw %0,%1" : "=r" (lz) : "r" (mant));
+		mant <<= lz - 8;
+		exp = (-118 - lz) << 23;
+	} else {
+		mant |= 0x800000;
+		exp -= 127 << 23;
+	}
+
+	if (mant >= 0xb504f3) {				/* 2^0.5 * 2^23 */
+		exp |= 0x400000;			/* 0.5 * 2^23 */
+		asm("mulhwu %0,%1,%2" : "=r" (mant)
+		    : "r" (mant), "r" (0xb504f334));	/* 2^-0.5 * 2^32 */
+	}
+	if (mant >= 0x9837f0) {				/* 2^0.25 * 2^23 */
+		exp |= 0x200000;			/* 0.25 * 2^23 */
+		asm("mulhwu %0,%1,%2" : "=r" (mant)
+		    : "r" (mant), "r" (0xd744fccb));	/* 2^-0.25 * 2^32 */
+	}
+	if (mant >= 0x8b95c2) {				/* 2^0.125 * 2^23 */
+		exp |= 0x100000;			/* 0.125 * 2^23 */
+		asm("mulhwu %0,%1,%2" : "=r" (mant)
+		    : "r" (mant), "r" (0xeac0c6e8));	/* 2^-0.125 * 2^32 */
+	}
+	if (mant > 0x800000) {				/* 1.0 * 2^23 */
+		/* calculate (mant - 1) * 1.381097463 */
+		/* 1.381097463 == 0.125 / (2^0.125 - 1) */
+		asm("mulhwu %0,%1,%2" : "=r" (frac)
+		    : "r" ((mant - 0x800000) << 1), "r" (0xb0c7cd3a));
+		exp += frac;
+	}
+	s = exp & 0x80000000;
+	if (exp != 0) {
+		if (s)
+			exp = -exp;
+		asm("cntlzw %0,%1" : "=r" (lz) : "r" (exp));
+		lz = 8 - lz;
+		if (lz > 0)
+			exp >>= lz;
+		else if (lz < 0)
+			exp <<= -lz;
+		s += ((lz + 126) << 23) + exp;
+	}
+	return s;
+}
+
+#define VSCR_SAT	1
+
+static int ctsxs(unsigned int x, int scale, unsigned int *vscrp)
+{
+	int exp, mant;
+
+	exp = (x >> 23) & 0xff;
+	mant = x & 0x7fffff;
+	if (exp == 255 && mant != 0)
+		return 0;		/* NaN -> 0 */
+	exp = exp - 127 + scale;
+	if (exp < 0)
+		return 0;		/* round towards zero */
+	if (exp >= 31) {
+		/* saturate, unless the result would be -2^31 */
+		if (x + (scale << 23) != 0xcf000000)
+			*vscrp |= VSCR_SAT;
+		return (x & 0x80000000)? 0x80000000: 0x7fffffff;
+	}
+	mant |= 0x800000;
+	mant = (mant << 7) >> (30 - exp);
+	return (x & 0x80000000)? -mant: mant;
+}
+
+static unsigned int ctuxs(unsigned int x, int scale, unsigned int *vscrp)
+{
+	int exp;
+	unsigned int mant;
+
+	exp = (x >> 23) & 0xff;
+	mant = x & 0x7fffff;
+	if (exp == 255 && mant != 0)
+		return 0;		/* NaN -> 0 */
+	exp = exp - 127 + scale;
+	if (exp < 0)
+		return 0;		/* round towards zero */
+	if (x & 0x80000000) {
+		/* negative => saturate to 0 */
+		*vscrp |= VSCR_SAT;
+		return 0;
+	}
+	if (exp >= 32) {
+		/* saturate */
+		*vscrp |= VSCR_SAT;
+		return 0xffffffff;
+	}
+	mant |= 0x800000;
+	mant = (mant << 8) >> (31 - exp);
+	return mant;
+}
+
+/* Round to floating integer, towards 0 */
+static unsigned int rfiz(unsigned int x)
+{
+	int exp;
+
+	exp = ((x >> 23) & 0xff) - 127;
+	if (exp == 128 && (x & 0x7fffff) != 0)
+		return x | 0x400000;	/* NaN -> make it a QNaN */
+	if (exp >= 23)
+		return x;		/* it's an integer already (or Inf) */
+	if (exp < 0)
+		return x & 0x80000000;	/* |x| < 1.0 rounds to 0 */
+	return x & ~(0x7fffff >> exp);
+}
+
+/* Round to floating integer, towards +/- Inf */
+static unsigned int rfii(unsigned int x)
+{
+	int exp, mask;
+
+	exp = ((x >> 23) & 0xff) - 127;
+	if (exp == 128 && (x & 0x7fffff) != 0)
+		return x | 0x400000;	/* NaN -> make it a QNaN */
+	if (exp >= 23)
+		return x;		/* it's an integer already (or Inf) */
+	if ((x & 0x7fffffff) == 0)
+		return x;		/* +/-0 -> +/-0 */
+	if (exp < 0)
+		/* 0 < |x| < 1.0 rounds to +/- 1.0 */
+		return (x & 0x80000000) | 0x3f800000;
+	mask = 0x7fffff >> exp;
+	/* mantissa overflows into exponent - that's OK,
+	   it can't overflow into the sign bit */
+	return (x + mask) & ~mask;
+}
+
+/* Round to floating integer, to nearest */
+static unsigned int rfin(unsigned int x)
+{
+	int exp, half;
+
+	exp = ((x >> 23) & 0xff) - 127;
+	if (exp == 128 && (x & 0x7fffff) != 0)
+		return x | 0x400000;	/* NaN -> make it a QNaN */
+	if (exp >= 23)
+		return x;		/* it's an integer already (or Inf) */
+	if (exp < -1)
+		return x & 0x80000000;	/* |x| < 0.5 -> +/-0 */
+	if (exp == -1)
+		/* 0.5 <= |x| < 1.0 rounds to +/- 1.0 */
+		return (x & 0x80000000) | 0x3f800000;
+	half = 0x400000 >> exp;
+	/* add 0.5 to the magnitude and chop off the fraction bits */
+	return (x + half) & ~(0x7fffff >> exp);
+}
+
+int emulate_altivec(struct pt_regs *regs)
+{
+	unsigned int instr, i;
+	unsigned int va, vb, vc, vd;
+	vector128 *vrs;
+
+	if (get_user(instr, (unsigned int __user *) regs->nip))
+		return -EFAULT;
+	if ((instr >> 26) != 4)
+		return -EINVAL;		/* not an altivec instruction */
+	vd = (instr >> 21) & 0x1f;
+	va = (instr >> 16) & 0x1f;
+	vb = (instr >> 11) & 0x1f;
+	vc = (instr >> 6) & 0x1f;
+
+	vrs = current->thread.vr;
+	switch (instr & 0x3f) {
+	case 10:
+		switch (vc) {
+		case 0:	/* vaddfp */
+			vaddfp(&vrs[vd], &vrs[va], &vrs[vb]);
+			break;
+		case 1:	/* vsubfp */
+			vsubfp(&vrs[vd], &vrs[va], &vrs[vb]);
+			break;
+		case 4:	/* vrefp */
+			vrefp(&vrs[vd], &vrs[vb]);
+			break;
+		case 5:	/* vrsqrtefp */
+			vrsqrtefp(&vrs[vd], &vrs[vb]);
+			break;
+		case 6:	/* vexptefp */
+			for (i = 0; i < 4; ++i)
+				vrs[vd].u[i] = eexp2(vrs[vb].u[i]);
+			break;
+		case 7:	/* vlogefp */
+			for (i = 0; i < 4; ++i)
+				vrs[vd].u[i] = elog2(vrs[vb].u[i]);
+			break;
+		case 8:		/* vrfin */
+			for (i = 0; i < 4; ++i)
+				vrs[vd].u[i] = rfin(vrs[vb].u[i]);
+			break;
+		case 9:		/* vrfiz */
+			for (i = 0; i < 4; ++i)
+				vrs[vd].u[i] = rfiz(vrs[vb].u[i]);
+			break;
+		case 10:	/* vrfip */
+			for (i = 0; i < 4; ++i) {
+				u32 x = vrs[vb].u[i];
+				x = (x & 0x80000000)? rfiz(x): rfii(x);
+				vrs[vd].u[i] = x;
+			}
+			break;
+		case 11:	/* vrfim */
+			for (i = 0; i < 4; ++i) {
+				u32 x = vrs[vb].u[i];
+				x = (x & 0x80000000)? rfii(x): rfiz(x);
+				vrs[vd].u[i] = x;
+			}
+			break;
+		case 14:	/* vctuxs */
+			for (i = 0; i < 4; ++i)
+				vrs[vd].u[i] = ctuxs(vrs[vb].u[i], va,
+						&current->thread.vscr.u[3]);
+			break;
+		case 15:	/* vctsxs */
+			for (i = 0; i < 4; ++i)
+				vrs[vd].u[i] = ctsxs(vrs[vb].u[i], va,
+						&current->thread.vscr.u[3]);
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case 46:	/* vmaddfp */
+		vmaddfp(&vrs[vd], &vrs[va], &vrs[vb], &vrs[vc]);
+		break;
+	case 47:	/* vnmsubfp */
+		vnmsubfp(&vrs[vd], &vrs[va], &vrs[vb], &vrs[vc]);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
diff --git a/arch/ppc/kernel/vector.S b/arch/ppc/kernel/vector.S
new file mode 100644
index 00000000000..82a21346bf8
--- /dev/null
+++ b/arch/ppc/kernel/vector.S
@@ -0,0 +1,217 @@
+#include <asm/ppc_asm.h>
+#include <asm/processor.h>
+
+/*
+ * The routines below are in assembler so we can closely control the
+ * usage of floating-point registers.  These routines must be called
+ * with preempt disabled.
+ */
+	.data
+fpzero:
+	.long	0
+fpone:
+	.long	0x3f800000	/* 1.0 in single-precision FP */
+fphalf:
+	.long	0x3f000000	/* 0.5 in single-precision FP */
+
+	.text
+/*
+ * Internal routine to enable floating point and set FPSCR to 0.
+ * Don't call it from C; it doesn't use the normal calling convention.
+ */
+fpenable:
+	mfmsr	r10
+	ori	r11,r10,MSR_FP
+	mtmsr	r11
+	isync
+	stfd	fr0,24(r1)
+	stfd	fr1,16(r1)
+	stfd	fr31,8(r1)
+	lis	r11,fpzero@ha
+	mffs	fr31
+	lfs	fr1,fpzero@l(r11)
+	mtfsf	0xff,fr1
+	blr
+
+fpdisable:
+	mtfsf	0xff,fr31
+	lfd	fr31,8(r1)
+	lfd	fr1,16(r1)
+	lfd	fr0,24(r1)
+	mtmsr	r10
+	isync
+	blr
+
+/*
+ * Vector add, floating point.
+ */
+	.globl	vaddfp
+vaddfp:
+	stwu	r1,-32(r1)
+	mflr	r0
+	stw	r0,36(r1)
+	bl	fpenable
+	li	r0,4
+	mtctr	r0
+	li	r6,0
+1:	lfsx	fr0,r4,r6
+	lfsx	fr1,r5,r6
+	fadds	fr0,fr0,fr1
+	stfsx	fr0,r3,r6
+	addi	r6,r6,4
+	bdnz	1b
+	bl	fpdisable
+	lwz	r0,36(r1)
+	mtlr	r0
+	addi	r1,r1,32
+	blr
+
+/*
+ * Vector subtract, floating point.
+ */
+	.globl	vsubfp
+vsubfp:
+	stwu	r1,-32(r1)
+	mflr	r0
+	stw	r0,36(r1)
+	bl	fpenable
+	li	r0,4
+	mtctr	r0
+	li	r6,0
+1:	lfsx	fr0,r4,r6
+	lfsx	fr1,r5,r6
+	fsubs	fr0,fr0,fr1
+	stfsx	fr0,r3,r6
+	addi	r6,r6,4
+	bdnz	1b
+	bl	fpdisable
+	lwz	r0,36(r1)
+	mtlr	r0
+	addi	r1,r1,32
+	blr
+
+/*
+ * Vector multiply and add, floating point.
+ */
+	.globl	vmaddfp
+vmaddfp:
+	stwu	r1,-48(r1)
+	mflr	r0
+	stw	r0,52(r1)
+	bl	fpenable
+	stfd	fr2,32(r1)
+	li	r0,4
+	mtctr	r0
+	li	r7,0
+1:	lfsx	fr0,r4,r7
+	lfsx	fr1,r5,r7
+	lfsx	fr2,r6,r7
+	fmadds	fr0,fr0,fr2,fr1
+	stfsx	fr0,r3,r7
+	addi	r7,r7,4
+	bdnz	1b
+	lfd	fr2,32(r1)
+	bl	fpdisable
+	lwz	r0,52(r1)
+	mtlr	r0
+	addi	r1,r1,48
+	blr
+
+/*
+ * Vector negative multiply and subtract, floating point.
+ */
+	.globl	vnmsubfp
+vnmsubfp:
+	stwu	r1,-48(r1)
+	mflr	r0
+	stw	r0,52(r1)
+	bl	fpenable
+	stfd	fr2,32(r1)
+	li	r0,4
+	mtctr	r0
+	li	r7,0
+1:	lfsx	fr0,r4,r7
+	lfsx	fr1,r5,r7
+	lfsx	fr2,r6,r7
+	fnmsubs	fr0,fr0,fr2,fr1
+	stfsx	fr0,r3,r7
+	addi	r7,r7,4
+	bdnz	1b
+	lfd	fr2,32(r1)
+	bl	fpdisable
+	lwz	r0,52(r1)
+	mtlr	r0
+	addi	r1,r1,48
+	blr
+
+/*
+ * Vector reciprocal estimate.  We just compute 1.0/x.
+ * r3 -> destination, r4 -> source.
+ */
+	.globl	vrefp
+vrefp:
+	stwu	r1,-32(r1)
+	mflr	r0
+	stw	r0,36(r1)
+	bl	fpenable
+	lis	r9,fpone@ha
+	li	r0,4
+	lfs	fr1,fpone@l(r9)
+	mtctr	r0
+	li	r6,0
+1:	lfsx	fr0,r4,r6
+	fdivs	fr0,fr1,fr0
+	stfsx	fr0,r3,r6
+	addi	r6,r6,4
+	bdnz	1b
+	bl	fpdisable
+	lwz	r0,36(r1)
+	mtlr	r0
+	addi	r1,r1,32
+	blr
+
+/*
+ * Vector reciprocal square-root estimate, floating point.
+ * We use the frsqrte instruction for the initial estimate followed
+ * by 2 iterations of Newton-Raphson to get sufficient accuracy.
+ * r3 -> destination, r4 -> source.
+ */
+	.globl	vrsqrtefp
+vrsqrtefp:
+	stwu	r1,-48(r1)
+	mflr	r0
+	stw	r0,52(r1)
+	bl	fpenable
+	stfd	fr2,32(r1)
+	stfd	fr3,40(r1)
+	stfd	fr4,48(r1)
+	stfd	fr5,56(r1)
+	lis	r9,fpone@ha
+	lis	r8,fphalf@ha
+	li	r0,4
+	lfs	fr4,fpone@l(r9)
+	lfs	fr5,fphalf@l(r8)
+	mtctr	r0
+	li	r6,0
+1:	lfsx	fr0,r4,r6
+	frsqrte	fr1,fr0		/* r = frsqrte(s) */
+	fmuls	fr3,fr1,fr0	/* r * s */
+	fmuls	fr2,fr1,fr5	/* r * 0.5 */
+	fnmsubs	fr3,fr1,fr3,fr4	/* 1 - s * r * r */
+	fmadds	fr1,fr2,fr3,fr1	/* r = r + 0.5 * r * (1 - s * r * r) */
+	fmuls	fr3,fr1,fr0	/* r * s */
+	fmuls	fr2,fr1,fr5	/* r * 0.5 */
+	fnmsubs	fr3,fr1,fr3,fr4	/* 1 - s * r * r */
+	fmadds	fr1,fr2,fr3,fr1	/* r = r + 0.5 * r * (1 - s * r * r) */
+	stfsx	fr1,r3,r6
+	addi	r6,r6,4
+	bdnz	1b
+	lfd	fr5,56(r1)
+	lfd	fr4,48(r1)
+	lfd	fr3,40(r1)
+	lfd	fr2,32(r1)
+	bl	fpdisable
+	lwz	r0,36(r1)
+	mtlr	r0
+	addi	r1,r1,32
+	blr
diff --git a/arch/ppc/kernel/vmlinux.lds.S b/arch/ppc/kernel/vmlinux.lds.S
new file mode 100644
index 00000000000..0c0e714b84d
--- /dev/null
+++ b/arch/ppc/kernel/vmlinux.lds.S
@@ -0,0 +1,192 @@
+#include <asm-generic/vmlinux.lds.h>
+
+OUTPUT_ARCH(powerpc:common)
+jiffies = jiffies_64 + 4;
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+/*  .init          : { *(.init)	} =0*/
+  .plt : { *(.plt) }
+  .text      :
+  {
+    *(.text)
+    SCHED_TEXT
+    LOCK_TEXT
+    *(.fixup)
+    *(.got1)
+    __got2_start = .;
+    *(.got2)
+    __got2_end = .;
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+
+  RODATA
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  .fixup   : { *(.fixup) }
+
+	__ex_table : {
+		__start___ex_table = .;
+		*(__ex_table)
+		__stop___ex_table = .;
+	}
+
+	__bug_table : {
+		__start___bug_table = .;
+		*(__bug_table)
+		__stop___bug_table = .;
+	}
+
+  /* Read-write section, merged into data segment: */
+  . = ALIGN(4096);
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.got.plt) *(.got)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+
+  . = ALIGN(4096);
+  __nosave_begin = .;
+  .data_nosave : { *(.data.nosave) }
+  . = ALIGN(4096);
+  __nosave_end = .;
+
+  . = ALIGN(32);
+  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = ALIGN(8192);
+  .data.init_task : { *(.data.init_task) }
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .init.text : {
+	_sinittext = .;
+	*(.init.text)
+	_einittext = .;
+  }
+  .init.data : {
+    *(.init.data);
+    __vtop_table_begin = .;
+    *(.vtop_fixup);
+    __vtop_table_end = .;
+    __ptov_table_begin = .;
+    *(.ptov_fixup);
+    __ptov_table_end = .;
+  }
+  . = ALIGN(16);
+  __setup_start = .;
+  .init.setup : { *(.init.setup) }
+  __setup_end = .;
+  __initcall_start = .;
+  .initcall.init : {
+	*(.initcall1.init)
+	*(.initcall2.init)
+	*(.initcall3.init)
+	*(.initcall4.init)
+	*(.initcall5.init)
+	*(.initcall6.init)
+	*(.initcall7.init)
+  }
+  __initcall_end = .;
+
+  __con_initcall_start = .;
+  .con_initcall.init : { *(.con_initcall.init) }
+  __con_initcall_end = .;
+
+  SECURITY_INIT
+
+  __start___ftr_fixup = .;
+  __ftr_fixup : { *(__ftr_fixup) }
+  __stop___ftr_fixup = .;
+
+  . = ALIGN(32);
+  __per_cpu_start = .;
+  .data.percpu  : { *(.data.percpu) }
+  __per_cpu_end = .;
+
+  . = ALIGN(4096);
+  __initramfs_start = .;
+  .init.ramfs : { *(.init.ramfs) }
+  __initramfs_end = .;
+
+  . = ALIGN(4096);
+  __init_end = .;
+
+  . = ALIGN(4096);
+  __pmac_begin = .;
+  .pmac.text : { *(.pmac.text) }
+  .pmac.data : { *(.pmac.data) }
+  . = ALIGN(4096);
+  __pmac_end = .;
+
+  . = ALIGN(4096);
+  __prep_begin = .;
+  .prep.text : { *(.prep.text) }
+  .prep.data : { *(.prep.data) }
+  . = ALIGN(4096);
+  __prep_end = .;
+
+  . = ALIGN(4096);
+  __chrp_begin = .;
+  .chrp.text : { *(.chrp.text) }
+  .chrp.data : { *(.chrp.data) }
+  . = ALIGN(4096);
+  __chrp_end = .;
+
+  . = ALIGN(4096);
+  __openfirmware_begin = .;
+  .openfirmware.text : { *(.openfirmware.text) }
+  .openfirmware.data : { *(.openfirmware.data) }
+  . = ALIGN(4096);
+  __openfirmware_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  __bss_stop = .;
+
+  _end = . ;
+  PROVIDE (end = .);
+
+  /* Sections to be discarded. */
+  /DISCARD/ : {
+    *(.exitcall.exit)
+  }
+}