sh: heartbeat consolidation for banked LEDs.

This consolidates the various board heartbeat LED implementations,
used for strobing the load average across a LED bank. Those boards
not implementing a full bank can hook in via the LED class.

We leave the compat hook in the machvec for now until those non-banked
boards are able to migrate to the drivers/leds.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

3 files changed, 26 insertions, 53 deletions

diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/sh03/Makefile
index 321be50e36a..400306a796e 100644
--- a/arch/sh/boards/sh03/Makefile
+++ b/arch/sh/boards/sh03/Makefile
@@ -3,4 +3,3 @@
 #
 
 obj-y	 := setup.o rtc.o
-obj-$(CONFIG_HEARTBEAT) += led.o
diff --git a/arch/sh/boards/sh03/led.c b/arch/sh/boards/sh03/led.c
deleted file mode 100644
index d38562ad6be..00000000000
--- a/arch/sh/boards/sh03/led.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/sh/boards/sh03/led.c
- *
- * Copyright (C) 2004  Saito.K Interface Corporation.
- *
- * This file contains Interface CTP/PCI-SH03 specific LED code.
- */
-
-#include <linux/sched.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_sh03(void)
-{
-	static unsigned int cnt = 0, period = 0;
-	volatile unsigned char* p = (volatile unsigned char*)0xa0800000;
-	static unsigned bit = 0, up = 1;
-
-	cnt += 1;
-	if (cnt < period) {
-		return;
-	}
-
-	cnt = 0;
-
-	/* Go through the points (roughly!):
-	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
-	 */
-	period = 110 - ( (300<<FSHIFT)/
-			 ((avenrun[0]/5) + (3<<FSHIFT)) );
-
-	if (up) {
-		if (bit == 7) {
-			bit--;
-			up=0;
-		} else {
-			bit ++;
-		}
-	} else {
-		if (bit == 0) {
-			bit++;
-			up=1;
-		} else {
-			bit--;
-		}
-	}
-	*p = 1<<bit;
-
-}
diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c
index 5ad1e19771b..c069c444b4e 100644
--- a/arch/sh/boards/sh03/setup.c
+++ b/arch/sh/boards/sh03/setup.c
@@ -8,6 +8,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/pci.h>
+#include <linux/platform_device.h>
 #include <asm/io.h>
 #include <asm/rtc.h>
 #include <asm/sh03/io.h>
@@ -48,15 +49,36 @@ static void __init sh03_setup(char **cmdline_p)
 	board_time_init = sh03_time_init;
 }
 
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= 0xa0800000,
+		.end	= 0xa0800000 + 8 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *sh03_devices[] __initdata = {
+	&heartbeat_device,
+};
+
+static int __init sh03_devices_setup(void)
+{
+	return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
+}
+__initcall(sh03_devices_setup);
+
 struct sh_machine_vector mv_sh03 __initmv = {
 	.mv_name		= "Interface (CTP/PCI-SH03)",
 	.mv_setup		= sh03_setup,
 	.mv_nr_irqs		= 48,
 	.mv_ioport_map		= sh03_ioport_map,
 	.mv_init_irq		= init_sh03_IRQ,
-
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_sh03,
-#endif
 };
 ALIAS_MV(sh03)