Merge branch 'master' into upstream

3 files changed, 41 insertions, 253 deletions

diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/snapgear/io.c
index e2eb78fc381..0f482426455 100644
--- a/arch/sh/boards/snapgear/io.c
+++ b/arch/sh/boards/snapgear/io.c
@@ -1,6 +1,4 @@
-/* 
- * linux/arch/sh/kernel/io_7751se.c
- *
+/*
  * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
  * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
  * Based largely on io_se.c.
@@ -11,67 +9,22 @@
  * placeholder code from io_se.c left in with the
  * expectation of later SuperIO and PCMCIA access.
  */
-
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <asm/io.h>
 #include <asm/addrspace.h>
 
-#include <asm/pci.h>
-#include "../../drivers/pci/pci-sh7751.h"
-
 #ifdef CONFIG_SH_SECUREEDGE5410
 unsigned short secureedge5410_ioport;
 #endif
 
-/*
- * The SnapGear uses the built-in PCI controller (PCIC)
- * of the 7751 processor
- */ 
-
-#define PCIIOBR		(volatile long *)PCI_REG(SH7751_PCIIOBR)
-#define PCIMBR          (volatile long *)PCI_REG(SH7751_PCIMBR)
-#define PCI_IO_AREA	SH7751_PCI_IO_BASE
-#define PCI_MEM_AREA	SH7751_PCI_CONFIG_BASE
-
-
-#define PCI_IOMAP(adr)	(PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
-
-
-#define maybebadio(name,port) \
-  printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
-	 #name, (port), (__u32) __builtin_return_address(0))
-
-
-static inline void delay(void)
-{
-	ctrl_inw(0xa0000000);
-}
-
-
 static inline volatile __u16 *port2adr(unsigned int port)
 {
-#if 0
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-#endif
-	maybebadio(name,(unsigned long)port);
+	maybebadio((unsigned long)port);
 	return (volatile __u16*)port;
 }
 
-
-/* In case someone configures the kernel w/o PCI support: in that */
-/* scenario, don't ever bother to check for PCI-window addresses */
-
-/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
-#if defined(CONFIG_PCI)
-#define CHECK_SH7751_PCIIO(port) \
-  ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
-#else
-#define CHECK_SH7751_PCIIO(port) (0)
-#endif
-
 /*
  * General outline: remap really low stuff [eventually] to SuperIO,
  * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
@@ -79,148 +32,106 @@ static inline volatile __u16 *port2adr(unsigned int port)
  * should be way beyond the window, and is used  w/o translation for
  * compatibility.
  */
-
 unsigned char snapgear_inb(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned char *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-		return *(volatile unsigned char *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+		return *(volatile unsigned char *)pci_ioaddr(port);
 	else
-		return (*port2adr(port))&0xff; 
+		return (*port2adr(port)) & 0xff;
 }
 
-
 unsigned char snapgear_inb_p(unsigned long port)
 {
 	unsigned char v;
 
 	if (PXSEG(port))
 		v = *(volatile unsigned char *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-		v = *(volatile unsigned char *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+		v = *(volatile unsigned char *)pci_ioaddr(port);
 	else
-		v = (*port2adr(port))&0xff; 
-	delay();
+		v = (*port2adr(port))&0xff;
+	ctrl_delay();
 	return v;
 }
 
-
 unsigned short snapgear_inw(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned short *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-		return *(volatile unsigned short *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+		return *(volatile unsigned short *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
-		maybebadio(inw, port);
+		maybebadio(port);
 	return 0;
 }
 
-
 unsigned int snapgear_inl(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned long *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-		return *(volatile unsigned int *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+		return *(volatile unsigned int *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
-		maybebadio(inl, port);
+		maybebadio(port);
 	return 0;
 }
 
-
 void snapgear_outb(unsigned char value, unsigned long port)
 {
 
 	if (PXSEG(port))
 		*(volatile unsigned char *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-		*((unsigned char*)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
 }
 
-
 void snapgear_outb_p(unsigned char value, unsigned long port)
 {
 	if (PXSEG(port))
 		*(volatile unsigned char *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-		*((unsigned char*)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
-	delay();
+	ctrl_delay();
 }
 
-
 void snapgear_outw(unsigned short value, unsigned long port)
 {
 	if (PXSEG(port))
 		*(volatile unsigned short *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-		*((unsigned short *)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned short *)pci_ioaddr(port)) = value;
 	else if (port >= 0x2000)
 		*port2adr(port) = value;
 	else
-		maybebadio(outw, port);
+		maybebadio(port);
 }
 
-
 void snapgear_outl(unsigned int value, unsigned long port)
 {
 	if (PXSEG(port))
 		*(volatile unsigned long *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-		*((unsigned long*)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned long*)pci_ioaddr(port)) = value;
 	else
-		maybebadio(outl, port);
+		maybebadio(port);
 }
 
 void snapgear_insl(unsigned long port, void *addr, unsigned long count)
 {
-	maybebadio(insl, port);
+	maybebadio(port);
 }
 
 void snapgear_outsl(unsigned long port, const void *addr, unsigned long count)
 {
-	maybebadio(outsw, port);
-}
-
-/* Map ISA bus address to the real address. Only for PCMCIA.  */
-
-
-/* ISA page descriptor.  */
-static __u32 sh_isa_memmap[256];
-
-
-#if 0
-static int sh_isa_mmap(__u32 start, __u32 length, __u32 offset)
-{
-	int idx;
-
-	if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000))
-		return -1;
-
-	idx = start >> 12;
-	sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff);
-#if 0
-	printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n",
-	       start, length, offset, idx, sh_isa_memmap[idx]);
-#endif
-	return 0;
-}
-#endif
-
-unsigned long snapgear_isa_port2addr(unsigned long offset)
-{
-	int idx;
-
-	idx = (offset >> 12) & 0xff;
-	offset &= 0xfff;
-	return sh_isa_memmap[idx] + offset;
+	maybebadio(port);
 }
diff --git a/arch/sh/boards/snapgear/rtc.c b/arch/sh/boards/snapgear/rtc.c
index b71e009da35..1659fdd6695 100644
--- a/arch/sh/boards/snapgear/rtc.c
+++ b/arch/sh/boards/snapgear/rtc.c
@@ -17,14 +17,9 @@
 #include <linux/time.h>
 #include <linux/rtc.h>
 #include <linux/mc146818rtc.h>
-
 #include <asm/io.h>
-#include <asm/rtc.h>
-#include <asm/mc146818rtc.h>
-
-/****************************************************************************/
 
-static int use_ds1302 = 0;
+static int use_ds1302;
 
 /****************************************************************************/
 /*
@@ -82,10 +77,6 @@ static unsigned int ds1302_readbyte(unsigned int addr)
 	unsigned int	val;
 	unsigned long	flags;
 
-#if 0
-	printk("SnapGear RTC: ds1302_readbyte(addr=%x)\n", addr);
-#endif
-
 	local_irq_save(flags);
 	set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK);
 	set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK));
@@ -104,10 +95,6 @@ static void ds1302_writebyte(unsigned int addr, unsigned int val)
 {
 	unsigned long	flags;
 
-#if 0
-	printk("SnapGear RTC: ds1302_writebyte(addr=%x)\n", addr);
-#endif
-
 	local_irq_save(flags);
 	set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK);
 	set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK));
@@ -168,11 +155,8 @@ void __init secureedge5410_rtc_init(void)
 		}
 
 	if (use_ds1302) {
-		rtc_get_time = snapgear_rtc_gettimeofday;
-		rtc_set_time = snapgear_rtc_settimeofday;
-	} else {
-		rtc_get_time = sh_rtc_gettimeofday;
-		rtc_set_time = sh_rtc_settimeofday;
+		rtc_sh_get_time = snapgear_rtc_gettimeofday;
+		rtc_sh_set_time = snapgear_rtc_settimeofday;
 	}
 		
 	printk("SnapGear RTC: using %s rtc.\n", use_ds1302 ? "ds1302" : "internal");
@@ -187,10 +171,8 @@ void snapgear_rtc_gettimeofday(struct timespec *ts)
 {
 	unsigned int sec, min, hr, day, mon, yr;
 
-	if (!use_ds1302) {
-		sh_rtc_gettimeofday(ts);
+	if (!use_ds1302)
 		return;
-	}
 
  	sec = bcd2int(ds1302_readbyte(RTC_ADDR_SEC));
  	min = bcd2int(ds1302_readbyte(RTC_ADDR_MIN));
@@ -231,7 +213,7 @@ int snapgear_rtc_settimeofday(const time_t secs)
 	unsigned long nowtime;
 
 	if (!use_ds1302)
-		return sh_rtc_settimeofday(secs);
+		return 0;
 
 /*
  *	This is called direct from the kernel timer handling code.
@@ -240,10 +222,6 @@ int snapgear_rtc_settimeofday(const time_t secs)
 
 	nowtime = secs;
 
-#if 1
-	printk("SnapGear RTC: snapgear_rtc_settimeofday(nowtime=%ld)\n", nowtime);
-#endif
-
 	/* STOP RTC */
 	ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) | 0x80);
 
@@ -329,5 +307,3 @@ void secureedge5410_cmos_write(unsigned char val, int addr)
 	default:                                                      break;
 	}
 }
-
-/****************************************************************************/
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c
index f1f7c70c940..f5e98c56b53 100644
--- a/arch/sh/boards/snapgear/setup.c
+++ b/arch/sh/boards/snapgear/setup.c
@@ -1,5 +1,4 @@
-/****************************************************************************/
-/* 
+/*
  * linux/arch/sh/boards/snapgear/setup.c
  *
  * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
@@ -12,8 +11,6 @@
  *           Modified for 7751 Solution Engine by
  *           Ian da Silva and Jeremy Siegel, 2001.
  */
-/****************************************************************************/
-
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -21,14 +18,13 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/sched.h>
-
 #include <asm/machvec.h>
-#include <asm/mach/io.h>
+#include <asm/snapgear.h>
 #include <asm/irq.h>
 #include <asm/io.h>
+#include <asm/rtc.h>
 #include <asm/cpu/timer.h>
 
-extern void (*board_time_init)(void);
 extern void secureedge5410_rtc_init(void);
 extern void pcibios_init(void);
 
@@ -85,101 +81,20 @@ static void __init init_snapgear_IRQ(void)
 	make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY);
 }
 
-/****************************************************************************/
-/*
- *	Fast poll interrupt simulator.
- */
-
 /*
- * Leave all of the fast timer/fast poll stuff commented out for now, since
- * it's not clear whether it actually works or not. Since it wasn't being used
- * at all in 2.4, we'll assume it's not sane for 2.6 either.. -- PFM
- */
-#if 0
-#define FAST_POLL	1000
-//#define FAST_POLL_INTR
-
-#define FASTTIMER_IRQ   17
-#define FASTTIMER_IPR_ADDR  INTC_IPRA
-#define FASTTIMER_IPR_POS    2
-#define FASTTIMER_PRIORITY   3
-
-#ifdef FAST_POLL_INTR
-#define TMU1_TCR_INIT	0x0020
-#else
-#define TMU1_TCR_INIT	0
-#endif
-#define TMU_TSTR_INIT	1
-#define TMU1_TCR_CALIB	0x0000
-
-
-#ifdef FAST_POLL_INTR
-static void fast_timer_irq(int irq, void *dev_instance, struct pt_regs *regs)
-{
-	unsigned long timer_status;
-    timer_status = ctrl_inw(TMU1_TCR);
-	timer_status &= ~0x100;
-	ctrl_outw(timer_status, TMU1_TCR);
-}
-#endif
-
-/*
- * return the current ticks on the fast timer
- */
-
-unsigned long fast_timer_count(void)
-{
-	return(ctrl_inl(TMU1_TCNT));
-}
-
-/*
- * setup a fast timer for profiling etc etc
+ * Initialize the board
  */
-
-static void setup_fast_timer()
-{
-	unsigned long interval;
-
-#ifdef FAST_POLL_INTR
-	interval = (current_cpu_data.module_clock/4 + FAST_POLL/2) / FAST_POLL;
-
-	make_ipr_irq(FASTTIMER_IRQ, FASTTIMER_IPR_ADDR, FASTTIMER_IPR_POS,
-			FASTTIMER_PRIORITY);
-
-	printk("SnapGear: %dHz fast timer on IRQ %d\n",FAST_POLL,FASTTIMER_IRQ);
-
-	if (request_irq(FASTTIMER_IRQ, fast_timer_irq, 0, "SnapGear fast timer",
-			NULL) != 0)
-		printk("%s(%d): request_irq() failed?\n", __FILE__, __LINE__);
-#else
-	printk("SnapGear: fast timer running\n",FAST_POLL,FASTTIMER_IRQ);
-	interval = 0xffffffff;
-#endif
-
-	ctrl_outb(ctrl_inb(TMU_TSTR) & ~0x2, TMU_TSTR); /* disable timer 1 */
-	ctrl_outw(TMU1_TCR_INIT, TMU1_TCR);
-	ctrl_outl(interval, TMU1_TCOR);
-	ctrl_outl(interval, TMU1_TCNT);
-	ctrl_outb(ctrl_inb(TMU_TSTR) | 0x2, TMU_TSTR); /* enable timer 1 */
-
-	printk("Timer count 1 = 0x%x\n", fast_timer_count());
-	udelay(1000);
-	printk("Timer count 2 = 0x%x\n", fast_timer_count());
-}
-#endif
-
-/****************************************************************************/
-
-const char *get_system_type(void)
+static void __init snapgear_setup(char **cmdline_p)
 {
-	return "SnapGear SecureEdge5410";
+	board_time_init = secureedge5410_rtc_init;
 }
 
 /*
  * The Machine Vector
  */
-
 struct sh_machine_vector mv_snapgear __initmv = {
+	.mv_name		= "SnapGear SecureEdge5410",
+	.mv_setup		= snapgear_setup,
 	.mv_nr_irqs		= 72,
 
 	.mv_inb			= snapgear_inb,
@@ -196,20 +111,6 @@ struct sh_machine_vector mv_snapgear __initmv = {
 	.mv_outw_p		= snapgear_outw,
 	.mv_outl_p		= snapgear_outl,
 
-	.mv_isa_port2addr	= snapgear_isa_port2addr,
-
 	.mv_init_irq		= init_snapgear_IRQ,
 };
 ALIAS_MV(snapgear)
-
-/*
- * Initialize the board
- */
-
-int __init platform_setup(void)
-{
-	board_time_init = secureedge5410_rtc_init;
-
-	return 0;
-}
-