sh: Kill off the rest of arch/sh64/kernel/.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 0 insertions, 531 deletions

diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c
deleted file mode 100644
index d1a9b5b078b..00000000000
--- a/arch/sh64/kernel/time.c
+++ /dev/null
@@ -1,531 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/sh64/kernel/time.c
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003 - 2007  Paul Mundt
- * Copyright (C) 2003  Richard Curnow
- *
- *    Original TMU/RTC code taken from sh version.
- *    Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
- *      Some code taken from i386 version.
- *      Copyright (C) 1991, 1992, 1995  Linus Torvalds
- */
-#include <linux/errno.h>
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/smp.h>
-#include <linux/module.h>
-#include <linux/bcd.h>
-#include <linux/timex.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <asm/registers.h>	 /* required by inline __asm__ stmt. */
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
-#include <asm/hardware.h>
-
-#define TMU_TOCR_INIT	0x00
-#define TMU0_TCR_INIT	0x0020
-#define TMU_TSTR_INIT	1
-#define TMU_TSTR_OFF	0
-
-/* Real Time Clock */
-#define	RTC_BLOCK_OFF	0x01040000
-#define RTC_BASE	PHYS_PERIPHERAL_BLOCK + RTC_BLOCK_OFF
-#define RTC_RCR1_CIE	0x10	/* Carry Interrupt Enable */
-#define RTC_RCR1	(rtc_base + 0x38)
-
-/* Clock, Power and Reset Controller */
-#define	CPRC_BLOCK_OFF	0x01010000
-#define CPRC_BASE	PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF
-
-#define FRQCR		(cprc_base+0x0)
-#define WTCSR		(cprc_base+0x0018)
-#define STBCR		(cprc_base+0x0030)
-
-/* Time Management Unit */
-#define	TMU_BLOCK_OFF	0x01020000
-#define TMU_BASE	PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
-#define TMU0_BASE	tmu_base + 0x8 + (0xc * 0x0)
-#define TMU1_BASE	tmu_base + 0x8 + (0xc * 0x1)
-#define TMU2_BASE	tmu_base + 0x8 + (0xc * 0x2)
-
-#define TMU_TOCR	tmu_base+0x0	/* Byte access */
-#define TMU_TSTR	tmu_base+0x4	/* Byte access */
-
-#define TMU0_TCOR	TMU0_BASE+0x0	/* Long access */
-#define TMU0_TCNT	TMU0_BASE+0x4	/* Long access */
-#define TMU0_TCR	TMU0_BASE+0x8	/* Word access */
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-static unsigned long tmu_base, rtc_base;
-unsigned long cprc_base;
-
-/* Variables to allow interpolation of time of day to resolution better than a
- * jiffy. */
-
-/* This is effectively protected by xtime_lock */
-static unsigned long ctc_last_interrupt;
-static unsigned long long usecs_per_jiffy = 1000000/HZ; /* Approximation */
-
-#define CTC_JIFFY_SCALE_SHIFT 40
-
-/* 2**CTC_JIFFY_SCALE_SHIFT / ctc_ticks_per_jiffy */
-static unsigned long long scaled_recip_ctc_ticks_per_jiffy;
-
-/* Estimate number of microseconds that have elapsed since the last timer tick,
-   by scaling the delta that has occurred in the CTC register.
-
-   WARNING WARNING WARNING : This algorithm relies on the CTC decrementing at
-   the CPU clock rate.  If the CPU sleeps, the CTC stops counting.  Bear this
-   in mind if enabling SLEEP_WORKS in process.c.  In that case, this algorithm
-   probably needs to use TMU.TCNT0 instead.  This will work even if the CPU is
-   sleeping, though will be coarser.
-
-   FIXME : What if usecs_per_tick is moving around too much, e.g. if an adjtime
-   is running or if the freq or tick arguments of adjtimex are modified after
-   we have calibrated the scaling factor?  This will result in either a jump at
-   the end of a tick period, or a wrap backwards at the start of the next one,
-   if the application is reading the time of day often enough.  I think we
-   ought to do better than this.  For this reason, usecs_per_jiffy is left
-   separated out in the calculation below.  This allows some future hook into
-   the adjtime-related stuff in kernel/timer.c to remove this hazard.
-
-*/
-
-static unsigned long usecs_since_tick(void)
-{
-	unsigned long long current_ctc;
-	long ctc_ticks_since_interrupt;
-	unsigned long long ull_ctc_ticks_since_interrupt;
-	unsigned long result;
-
-	unsigned long long mul1_out;
-	unsigned long long mul1_out_high;
-	unsigned long long mul2_out_low, mul2_out_high;
-
-	/* Read CTC register */
-	asm ("getcon cr62, %0" : "=r" (current_ctc));
-	/* Note, the CTC counts down on each CPU clock, not up.
-	   Note(2), use long type to get correct wraparound arithmetic when
-	   the counter crosses zero. */
-	ctc_ticks_since_interrupt = (long) ctc_last_interrupt - (long) current_ctc;
-	ull_ctc_ticks_since_interrupt = (unsigned long long) ctc_ticks_since_interrupt;
-
-	/* Inline assembly to do 32x32x32->64 multiplier */
-	asm volatile ("mulu.l %1, %2, %0" :
-	     "=r" (mul1_out) :
-	     "r" (ull_ctc_ticks_since_interrupt), "r" (usecs_per_jiffy));
-
-	mul1_out_high = mul1_out >> 32;
-
-	asm volatile ("mulu.l %1, %2, %0" :
-	     "=r" (mul2_out_low) :
-	     "r" (mul1_out), "r" (scaled_recip_ctc_ticks_per_jiffy));
-
-#if 1
-	asm volatile ("mulu.l %1, %2, %0" :
-	     "=r" (mul2_out_high) :
-	     "r" (mul1_out_high), "r" (scaled_recip_ctc_ticks_per_jiffy));
-#endif
-
-	result = (unsigned long) (((mul2_out_high << 32) + mul2_out_low) >> CTC_JIFFY_SCALE_SHIFT);
-
-	return result;
-}
-
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long flags;
-	unsigned long seq;
-	unsigned long usec, sec;
-
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		usec = usecs_since_tick();
-		sec = xtime.tv_sec;
-		usec += xtime.tv_nsec / 1000;
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	/*
-	 * This is revolting. We need to set "xtime" correctly. However, the
-	 * value in this location is the value at the most recent update of
-	 * wall time.  Discover what correction gettimeofday() would have
-	 * made, and then undo it!
-	 */
-	nsec -= 1000 * usecs_since_tick();
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-
-	return 0;
-}
-EXPORT_SYMBOL(do_settimeofday);
-
-/* Dummy RTC ops */
-static void null_rtc_get_time(struct timespec *tv)
-{
-	tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
-	tv->tv_nsec = 0;
-}
-
-static int null_rtc_set_time(const time_t secs)
-{
-	return 0;
-}
-
-void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
-int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
-
-/* last time the RTC clock got updated */
-static long last_rtc_update;
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-static inline void do_timer_interrupt(void)
-{
-	unsigned long long current_ctc;
-	asm ("getcon cr62, %0" : "=r" (current_ctc));
-	ctc_last_interrupt = (unsigned long) current_ctc;
-
-	do_timer(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(get_irq_regs()));
-#endif
-	if (current->pid)
-		profile_tick(CPU_PROFILING);
-
-#ifdef CONFIG_HEARTBEAT
-	{
-		extern void heartbeat(void);
-
-		heartbeat();
-	}
-#endif
-
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-		if (rtc_sh_set_time(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			/* do it again in 60 s */
-			last_rtc_update = xtime.tv_sec - 600;
-	}
-}
-
-/*
- * This is the same as the above, except we _also_ save the current
- * Time Stamp Counter value at the time of the timer interrupt, so that
- * we later on can estimate the time of day more exactly.
- */
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	unsigned long timer_status;
-
-	/* Clear UNF bit */
-	timer_status = ctrl_inw(TMU0_TCR);
-	timer_status &= ~0x100;
-	ctrl_outw(timer_status, TMU0_TCR);
-
-	/*
-	 * Here we are in the timer irq handler. We just have irqs locally
-	 * disabled but we don't know if the timer_bh is running on the other
-	 * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
-	 * the irq version of write_lock because as just said we have irq
-	 * locally disabled. -arca
-	 */
-	write_lock(&xtime_lock);
-	do_timer_interrupt();
-	write_unlock(&xtime_lock);
-
-	return IRQ_HANDLED;
-}
-
-
-static __init unsigned int get_cpu_hz(void)
-{
-	unsigned int count;
-	unsigned long __dummy;
-	unsigned long ctc_val_init, ctc_val;
-
-	/*
-	** Regardless the toolchain, force the compiler to use the
-	** arbitrary register r3 as a clock tick counter.
-	** NOTE: r3 must be in accordance with sh64_rtc_interrupt()
-	*/
-	register unsigned long long  __rtc_irq_flag __asm__ ("r3");
-
-	local_irq_enable();
-	do {} while (ctrl_inb(rtc_base) != 0);
-	ctrl_outb(RTC_RCR1_CIE, RTC_RCR1); /* Enable carry interrupt */
-
-	/*
-	 * r3 is arbitrary. CDC does not support "=z".
-	 */
-	ctc_val_init = 0xffffffff;
-	ctc_val = ctc_val_init;
-
-	asm volatile("gettr	tr0, %1\n\t"
-		     "putcon	%0, " __CTC "\n\t"
-		     "and	%2, r63, %2\n\t"
-		     "pta	$+4, tr0\n\t"
-		     "beq/l	%2, r63, tr0\n\t"
-		     "ptabs	%1, tr0\n\t"
-		     "getcon	" __CTC ", %0\n\t"
-		: "=r"(ctc_val), "=r" (__dummy), "=r" (__rtc_irq_flag)
-		: "0" (0));
-	local_irq_disable();
-	/*
-	 * SH-3:
-	 * CPU clock = 4 stages * loop
-	 * tst    rm,rm      if id ex
-	 * bt/s   1b            if id ex
-	 * add    #1,rd            if id ex
-         *                            (if) pipe line stole
-	 * tst    rm,rm                  if id ex
-         * ....
-	 *
-	 *
-	 * SH-4:
-	 * CPU clock = 6 stages * loop
-	 * I don't know why.
-         * ....
-	 *
-	 * SH-5:
-	 * Use CTC register to count.  This approach returns the right value
-	 * even if the I-cache is disabled (e.g. whilst debugging.)
-	 *
-	 */
-
-	count = ctc_val_init - ctc_val; /* CTC counts down */
-
-#if defined (CONFIG_SH_SIMULATOR)
-	/*
-	 * Let's pretend we are a 5MHz SH-5 to avoid a too
-	 * little timer interval. Also to keep delay
-	 * calibration within a reasonable time.
-	 */
-	return 5000000;
-#else
-	/*
-	 * This really is count by the number of clock cycles
-         * by the ratio between a complete R64CNT
-         * wrap-around (128) and CUI interrupt being raised (64).
-	 */
-	return count*2;
-#endif
-}
-
-static irqreturn_t sh64_rtc_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-
-	ctrl_outb(0, RTC_RCR1);	/* Disable Carry Interrupts */
-	regs->regs[3] = 1;	/* Using r3 */
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction irq0  = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "timer",
-};
-static struct irqaction irq1  = {
-	.handler = sh64_rtc_interrupt,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "rtc",
-};
-
-void __init time_init(void)
-{
-	unsigned int cpu_clock, master_clock, bus_clock, module_clock;
-	unsigned long interval;
-	unsigned long frqcr, ifc, pfc;
-	static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 };
-#define bfc_table ifc_table	/* Same */
-#define pfc_table ifc_table	/* Same */
-
-	tmu_base = onchip_remap(TMU_BASE, 1024, "TMU");
-	if (!tmu_base) {
-		panic("Unable to remap TMU\n");
-	}
-
-	rtc_base = onchip_remap(RTC_BASE, 1024, "RTC");
-	if (!rtc_base) {
-		panic("Unable to remap RTC\n");
-	}
-
-	cprc_base = onchip_remap(CPRC_BASE, 1024, "CPRC");
-	if (!cprc_base) {
-		panic("Unable to remap CPRC\n");
-	}
-
-	rtc_sh_get_time(&xtime);
-
-	setup_irq(TIMER_IRQ, &irq0);
-	setup_irq(RTC_IRQ, &irq1);
-
-	/* Check how fast it is.. */
-	cpu_clock = get_cpu_hz();
-
-	/* Note careful order of operations to maintain reasonable precision and avoid overflow. */
-	scaled_recip_ctc_ticks_per_jiffy = ((1ULL << CTC_JIFFY_SCALE_SHIFT) / (unsigned long long)(cpu_clock / HZ));
-
-	free_irq(RTC_IRQ, NULL);
-
-	printk("CPU clock: %d.%02dMHz\n",
-	       (cpu_clock / 1000000), (cpu_clock % 1000000)/10000);
-	{
-		unsigned short bfc;
-		frqcr = ctrl_inl(FRQCR);
-		ifc  = ifc_table[(frqcr>> 6) & 0x0007];
-		bfc  = bfc_table[(frqcr>> 3) & 0x0007];
-		pfc  = pfc_table[(frqcr>> 12) & 0x0007];
-		master_clock = cpu_clock * ifc;
-		bus_clock = master_clock/bfc;
-	}
-
-	printk("Bus clock: %d.%02dMHz\n",
-	       (bus_clock/1000000), (bus_clock % 1000000)/10000);
-	module_clock = master_clock/pfc;
-	printk("Module clock: %d.%02dMHz\n",
-	       (module_clock/1000000), (module_clock % 1000000)/10000);
-	interval = (module_clock/(HZ*4));
-
-	printk("Interval = %ld\n", interval);
-
-	current_cpu_data.cpu_clock    = cpu_clock;
-	current_cpu_data.master_clock = master_clock;
-	current_cpu_data.bus_clock    = bus_clock;
-	current_cpu_data.module_clock = module_clock;
-
-	/* Start TMU0 */
-	ctrl_outb(TMU_TSTR_OFF, TMU_TSTR);
-	ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
-	ctrl_outw(TMU0_TCR_INIT, TMU0_TCR);
-	ctrl_outl(interval, TMU0_TCOR);
-	ctrl_outl(interval, TMU0_TCNT);
-	ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
-}
-
-void enter_deep_standby(void)
-{
-	/* Disable watchdog timer */
-	ctrl_outl(0xa5000000, WTCSR);
-	/* Configure deep standby on sleep */
-	ctrl_outl(0x03, STBCR);
-
-#ifdef CONFIG_SH_ALPHANUMERIC
-	{
-		extern void mach_alphanum(int position, unsigned char value);
-		extern void mach_alphanum_brightness(int setting);
-		char halted[] = "Halted. ";
-		int i;
-		mach_alphanum_brightness(6); /* dimmest setting above off */
-		for (i=0; i<8; i++) {
-			mach_alphanum(i, halted[i]);
-		}
-		asm __volatile__ ("synco");
-	}
-#endif
-
-	asm __volatile__ ("sleep");
-	asm __volatile__ ("synci");
-	asm __volatile__ ("nop");
-	asm __volatile__ ("nop");
-	asm __volatile__ ("nop");
-	asm __volatile__ ("nop");
-	panic("Unexpected wakeup!\n");
-}
-
-static struct resource rtc_resources[] = {
-	[0] = {
-		/* RTC base, filled in by rtc_init */
-		.flags	= IORESOURCE_IO,
-	},
-	[1] = {
-		/* Period IRQ */
-		.start	= IRQ_PRI,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* Carry IRQ */
-		.start	= IRQ_CUI,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		/* Alarm IRQ */
-		.start	= IRQ_ATI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device rtc_device = {
-	.name		= "sh-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(rtc_resources),
-	.resource	= rtc_resources,
-};
-
-static int __init rtc_init(void)
-{
-	rtc_resources[0].start	= rtc_base;
-	rtc_resources[0].end	= rtc_resources[0].start + 0x58 - 1;
-
-	return platform_device_register(&rtc_device);
-}
-device_initcall(rtc_init);