sh: Move the sh64 Kconfig to arch/sh/Kconfig.sh64.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 0 insertions, 295 deletions

diff --git a/arch/sh64/Kconfig b/arch/sh64/Kconfig
deleted file mode 100644
index 6884d5a518a..00000000000
--- a/arch/sh64/Kconfig
+++ /dev/null
@@ -1,295 +0,0 @@
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-
-mainmenu "Linux/SH64 Kernel Configuration"
-
-config SUPERH
-	bool
-	default y
-
-config SUPERH64
-	bool
-	default y
-
-config MMU
-	bool
-	default y
-
-config QUICKLIST
-	def_bool y
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
-config GENERIC_FIND_NEXT_BIT
-	bool
-	default y
-
-config GENERIC_HWEIGHT
-	bool
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config ARCH_NO_VIRT_TO_BUS
-	def_bool y
-
-source init/Kconfig
-
-menu "System type"
-
-choice
-	prompt "SuperH system type"
-	default SH_SIMULATOR
-
-config SH_SIMULATOR
-	bool "Simulator"
-
-config SH_CAYMAN
-	bool "Cayman"
-
-config SH_HARP
-	bool "ST50-Harp"
-
-endchoice
-
-choice
-	prompt "Processor family"
-	default CPU_SH5
-
-config CPU_SH5
-	bool "SH-5"
-
-endchoice
-
-choice
-	prompt "Processor type"
-
-config CPU_SUBTYPE_SH5_101
-	bool "SH5-101"
-	depends on CPU_SH5
-
-config CPU_SUBTYPE_SH5_103
-	bool "SH5-103"
-	depends on CPU_SH5
-
-endchoice
-
-choice
-	prompt "Endianness"
-	default LITTLE_ENDIAN
-
-config LITTLE_ENDIAN
-	bool "Little-Endian"
-
-config BIG_ENDIAN
-	bool "Big-Endian"
-
-endchoice
-
-config SH_FPU
-	bool "FPU support"
-	default y
-
-config SH64_FPU_DENORM_FLUSH
-	depends on SH_FPU
-	bool "Flush floating point denorms to zero"
-
-choice
-	prompt "Page table levels"
-	default SH64_PGTABLE_2_LEVEL
-
-config SH64_PGTABLE_2_LEVEL
-	bool "2"
-
-config SH64_PGTABLE_3_LEVEL
-	bool "3"
-
-endchoice
-
-choice
-	prompt "HugeTLB page size"
-	depends on HUGETLB_PAGE && MMU
-	default HUGETLB_PAGE_SIZE_64K
-
-config HUGETLB_PAGE_SIZE_64K
-	bool "64K"
-
-config HUGETLB_PAGE_SIZE_1MB
-	bool "1MB"
-
-config HUGETLB_PAGE_SIZE_512MB
-	bool "512MB"
-
-endchoice
-
-config SH64_USER_MISALIGNED_FIXUP
-	bool "Fixup misaligned loads/stores occurring in user mode"
-
-comment "Memory options"
-
-config CACHED_MEMORY_OFFSET
-	hex "Cached Area Offset"
-	default "20000000"
-
-config MEMORY_START
-	hex "Physical memory start address"
-	default "80000000"
-
-config MEMORY_SIZE_IN_MB
-	int "Memory size (in MB)"
-	default "8" if SH_SIMULATOR
-	default "64"
-
-comment "Cache options"
-
-choice
-	prompt "DCache mode"
-	default DCACHE_DISABLED if SH_SIMULATOR
-	default DCACHE_WRITE_BACK
-
-config DCACHE_WRITE_BACK
-	bool "Write-back"
-	depends on !SH_SIMULATOR
-
-config DCACHE_WRITE_THROUGH
-	bool "Write-through"
-	depends on !SH_SIMULATOR
-
-config DCACHE_DISABLED
-	bool "Disabled"
-
-endchoice
-
-config ICACHE_DISABLED
-	bool "ICache Disabling"
-
-config PCIDEVICE_MEMORY_START
-	hex
-	default "C0000000"
-
-config DEVICE_MEMORY_START
-	hex
-	default "E0000000"
-
-config FLASH_MEMORY_START
-	hex "Flash memory/on-chip devices start address"
-	default "00000000"
-
-config PCI_BLOCK_START
-	hex "PCI block start address"
-	default "40000000"
-
-comment "CPU Subtype specific options"
-
-config SH64_ID2815_WORKAROUND
-	bool "Include workaround for SH5-101 cut2 silicon defect ID2815"
-
-comment "Misc options"
-
-config HEARTBEAT
-	bool "Heartbeat LED"
-	depends on SH_CAYMAN
-
-config HDSP253_LED
-	bool "Support for HDSP-253 LED"
-	depends on SH_CAYMAN
-
-config SH_DMA
-	tristate "DMA controller (DMAC) support"
-
-config PREEMPT
-	bool "Preemptible Kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-
-source "mm/Kconfig"
-
-endmenu
-
-menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
-
-config ISA
-	bool
-
-config SBUS
-	bool
-
-config PCI
-	bool "PCI support"
-	depends on SH_CAYMAN
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
-	  The PCI-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, contains valuable
-	  information about which PCI hardware does work under Linux and which
-	  doesn't.
-
-config SH_PCIDMA_NONCOHERENT
-	bool "Cache and PCI noncoherent"
-	depends on PCI
-	default y
-	help
-	  Enable this option if your platform does not have a CPU cache which
-	  remains coherent with PCI DMA. It is safest to say 'Y', although you
-	  will see better performance if you can say 'N', because the PCI DMA
-	  code will not have to flush the CPU's caches. If you have a PCI host
-	  bridge integrated with your SH CPU, refer carefully to the chip specs
-	  to see if you can say 'N' here. Otherwise, leave it as 'Y'.
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/hotplug/Kconfig"
-
-endmenu
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "kernel/Kconfig.instrumentation"
-
-source "arch/sh64/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"