diff options
| author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
| commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
| tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/sh | |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'arch/sh')
271 files changed, 45413 insertions, 0 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig new file mode 100644 index 00000000000..722ea1d63c9 --- /dev/null +++ b/arch/sh/Kconfig @@ -0,0 +1,793 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# + +mainmenu "Linux/SuperH Kernel Configuration" + +config SUPERH + bool + default y + help + The SuperH is a RISC processor targeted for use in embedded systems + and consumer electronics; it was also used in the Sega Dreamcast + gaming console. The SuperH port has a home page at + <http://www.linux-sh.org/>. + +config UID16 + bool + default y + +config RWSEM_GENERIC_SPINLOCK + bool + default y + +config RWSEM_XCHGADD_ALGORITHM + bool + +config GENERIC_HARDIRQS + bool + default y + +config GENERIC_IRQ_PROBE + bool + default y + +config GENERIC_CALIBRATE_DELAY + bool + default y + +source "init/Kconfig" + +menu "System type" + +choice + prompt "SuperH system type" + default SH_UNKNOWN + +config SH_SOLUTION_ENGINE + bool "SolutionEngine" + help + Select SolutionEngine if configuring for a Hitachi SH7709 + or SH7750 evaluation board. + +config SH_7751_SOLUTION_ENGINE + bool "SolutionEngine7751" + help + Select 7751 SolutionEngine if configuring for a Hitachi SH7751 + evaluation board. + +config SH_7300_SOLUTION_ENGINE + bool "SolutionEngine7300" + help + Select 7300 SolutionEngine if configuring for a Hitachi SH7300(SH-Mobile V) + evaluation board. + +config SH_73180_SOLUTION_ENGINE + bool "SolutionEngine73180" + help + Select 73180 SolutionEngine if configuring for a Hitachi SH73180(SH-Mobile 3) + evaluation board. + +config SH_7751_SYSTEMH + bool "SystemH7751R" + help + Select SystemH if you are configuring for a Renesas SystemH + 7751R evaluation board. + +config SH_STB1_HARP + bool "STB1_Harp" + +config SH_STB1_OVERDRIVE + bool "STB1_Overdrive" + +config SH_HP620 + bool "HP620" + help + Select HP620 if configuring for a HP jornada HP620. + More information (hardware only) at + <http://www.hp.com/jornada/>. + +config SH_HP680 + bool "HP680" + help + Select HP680 if configuring for a HP Jornada HP680. + More information (hardware only) at + <http://www.hp.com/jornada/products/680/>. + +config SH_HP690 + bool "HP690" + help + Select HP690 if configuring for a HP Jornada HP690. + More information (hardware only) + at <http://www.hp.com/jornada/products/680/>. + +config SH_CQREEK + bool "CqREEK" + help + Select CqREEK if configuring for a CqREEK SH7708 or SH7750. + More information at + <http://sources.redhat.com/ecos/hardware.html#SuperH>. + +config SH_DMIDA + bool "DMIDA" + help + Select DMIDA if configuring for a DataMyte 4000 Industrial + Digital Assistant. More information at <http://www.dmida.com/>. + +config SH_EC3104 + bool "EC3104" + help + Select EC3104 if configuring for a system with an Eclipse + International EC3104 chip, e.g. the Harris AD2000. + +config SH_SATURN + bool "Saturn" + help + Select Saturn if configuring for a SEGA Saturn. + +config SH_DREAMCAST + bool "Dreamcast" + help + Select Dreamcast if configuring for a SEGA Dreamcast. + More information at + <http://www.m17n.org/linux-sh/dreamcast/>. There is a + Dreamcast project is at <http://linuxdc.sourceforge.net/>. + +config SH_CAT68701 + bool "CAT68701" + +config SH_BIGSUR + bool "BigSur" + +config SH_SH2000 + bool "SH2000" + help + SH-2000 is a single-board computer based around SH7709A chip + intended for embedded applications. + It has an Ethernet interface (CS8900A), direct connected + Compact Flash socket, three serial ports and PC-104 bus. + More information at <http://sh2000.sh-linux.org>. + +config SH_ADX + bool "ADX" + +config SH_MPC1211 + bool "MPC1211" + +config SH_SH03 + bool "SH03" + help + CTP/PCI-SH03 is a CPU module computer that produced + by Interface Corporation. + It is compact and excellent in durability. + It will play an active part in your factory or laboratory + as a FA computer. + More information at <http://www.interface.co.jp> + +config SH_SECUREEDGE5410 + bool "SecureEdge5410" + help + Select SecureEdge5410 if configuring for a SnapGear SH board. + This includes both the OEM SecureEdge products as well as the + SME product line. + +config SH_HS7751RVOIP + bool "HS7751RVOIP" + help + Select HS7751RVOIP if configuring for a Renesas Technology + Sales VoIP board. + +config SH_RTS7751R2D + bool "RTS7751R2D" + help + Select RTS7751R2D if configuring for a Renesas Technology + Sales SH-Graphics board. + +config SH_EDOSK7705 + bool "EDOSK7705" + +config SH_SH4202_MICRODEV + bool "SH4-202 MicroDev" + help + Select SH4-202 MicroDev if configuring for a SuperH MicroDev board + with an SH4-202 CPU. + +config SH_UNKNOWN + bool "BareCPU" + help + "Bare CPU" aka "unknown" means an SH-based system which is not one + of the specific ones mentioned above, which means you need to enter + all sorts of stuff like CONFIG_MEMORY_START because the config + system doesn't already know what it is. You get a machine vector + without any platform-specific code in it, so things like the RTC may + not work. + + This option is for the early stages of porting to a new machine. + +endchoice + +choice + prompt "Processor family" + default CPU_SH4 + help + This option determines the CPU family to compile for. Supported + targets are SH-2, SH-3, and SH-4. These options are independent of + CPU functionality. As such, SH-DSP users will still want to select + their respective processor family in addition to the DSP support + option. + +config CPU_SH2 + bool "SH-2" + select SH_WRITETHROUGH + +config CPU_SH3 + bool "SH-3" + +config CPU_SH4 + bool "SH-4" + +endchoice + +choice + prompt "Processor subtype" + +config CPU_SUBTYPE_SH7604 + bool "SH7604" + depends on CPU_SH2 + help + Select SH7604 if you have SH7604 + +config CPU_SUBTYPE_SH7300 + bool "SH7300" + depends on CPU_SH3 + +config CPU_SUBTYPE_SH7705 + bool "SH7705" + depends on CPU_SH3 + +config CPU_SUBTYPE_SH7707 + bool "SH7707" + depends on CPU_SH3 + help + Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU. + +config CPU_SUBTYPE_SH7708 + bool "SH7708" + depends on CPU_SH3 + help + Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or + if you have a 100 Mhz SH-3 HD6417708R CPU. + +config CPU_SUBTYPE_SH7709 + bool "SH7709" + depends on CPU_SH3 + help + Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU. + +config CPU_SUBTYPE_SH7750 + bool "SH7750" + depends on CPU_SH4 + help + Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU. + +config CPU_SUBTYPE_SH7751 + bool "SH7751/SH7751R" + depends on CPU_SH4 + help + Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU, + or if you have a HD6417751R CPU. + +config CPU_SUBTYPE_SH7760 + bool "SH7760" + depends on CPU_SH4 + +config CPU_SUBTYPE_SH73180 + bool "SH73180" + depends on CPU_SH4 + +config CPU_SUBTYPE_ST40STB1 + bool "ST40STB1 / ST40RA" + depends on CPU_SH4 + help + Select ST40STB1 if you have a ST40RA CPU. + This was previously called the ST40STB1, hence the option name. + +config CPU_SUBTYPE_ST40GX1 + bool "ST40GX1" + depends on CPU_SH4 + help + Select ST40GX1 if you have a ST40GX1 CPU. + +config CPU_SUBTYPE_SH4_202 + bool "SH4-202" + depends on CPU_SH4 + +endchoice + +config SH7705_CACHE_32KB + bool "Enable 32KB cache size for SH7705" + depends on CPU_SUBTYPE_SH7705 + default y + +config MMU + bool "Support for memory management hardware" + depends on !CPU_SH2 + default y + help + Early SH processors (such as the SH7604) lack an MMU. In order to + boot on these systems, this option must not be set. + + On other systems (such as the SH-3 and 4) where an MMU exists, + turning this off will boot the kernel on these machines with the + MMU implicitly switched off. + +choice + prompt "HugeTLB page size" + depends on HUGETLB_PAGE && CPU_SH4 && MMU + default HUGETLB_PAGE_SIZE_64K + +config HUGETLB_PAGE_SIZE_64K + bool "64K" + +config HUGETLB_PAGE_SIZE_1MB + bool "1MB" + +endchoice + +config CMDLINE_BOOL + bool "Default bootloader kernel arguments" + +config CMDLINE + string "Initial kernel command string" + depends on CMDLINE_BOOL + default "console=ttySC1,115200" + +# Platform-specific memory start and size definitions +config MEMORY_START + hex "Physical memory start address" if !MEMORY_SET || MEMORY_OVERRIDE + default "0x08000000" if !MEMORY_SET || MEMORY_OVERRIDE || !MEMORY_OVERRIDE && SH_ADX || SH_MPC1211 || SH_SH03 || SH_SECUREEDGE5410 || SH_SH4202_MICRODEV + default "0x0c000000" if !MEMORY_OVERRIDE && (SH_DREAMCAST || SH_HP600 || SH_BIGSUR || SH_SH2000 || SH_73180_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_HS7751RVOIP || SH_RTS7751R2D || SH_EDOSK7705) + ---help--- + Computers built with Hitachi SuperH processors always + map the ROM starting at address zero. But the processor + does not specify the range that RAM takes. + + The physical memory (RAM) start address will be automatically + set to 08000000, unless you selected one of the following + processor types: SolutionEngine, Overdrive, HP620, HP680, HP690, + in which case the start address will be set to 0c000000. + + Tweak this only when porting to a new machine which is not already + known by the config system. Changing it from the known correct + value on any of the known systems will only lead to disaster. + +config MEMORY_SIZE + hex "Physical memory size" if !MEMORY_SET || MEMORY_OVERRIDE + default "0x00400000" if !MEMORY_SET || MEMORY_OVERRIDE || !MEMORY_OVERRIDE && SH_ADX || !MEMORY_OVERRIDE && (SH_HP600 || SH_BIGSUR || SH_SH2000) + default "0x01000000" if !MEMORY_OVERRIDE && SH_DREAMCAST || SH_SECUREEDGE5410 || SH_EDOSK7705 + default "0x02000000" if !MEMORY_OVERRIDE && (SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE) + default "0x04000000" if !MEMORY_OVERRIDE && (SH_7300_SOLUTION_ENGINE || SH_7751_SOLUTION_ENGINE || SH_HS7751RVOIP || SH_RTS7751R2D || SH_SH4202_MICRODEV) + default "0x08000000" if SH_MPC1211 || SH_SH03 + help + This sets the default memory size assumed by your SH kernel. It can + be overridden as normal by the 'mem=' argument on the kernel command + line. If unsure, consult your board specifications or just leave it + as 0x00400000 which was the default value before this became + configurable. + +config MEMORY_SET + bool + depends on !MEMORY_OVERRIDE && (SH_MPC1211 || SH_SH03 || SH_ADX || SH_DREAMCAST || SH_HP600 || SH_BIGSUR || SH_SH2000 || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_SECUREEDGE5410 || SH_HS7751RVOIP || SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_EDOSK7705) + default y + help + This is an option about which you will never be asked a question. + Therefore, I conclude that you do not exist - go away. + + There is a grue here. + +# If none of the above have set memory start/size, ask the user. +config MEMORY_OVERRIDE + bool "Override default load address and memory size" + +# XXX: break these out into the board-specific configs below +config CF_ENABLER + bool "Compact Flash Enabler support" + depends on SH_ADX || SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_CAT68701 || SH_SH03 + ---help--- + Compact Flash is a small, removable mass storage device introduced + in 1994 originally as a PCMCIA device. If you say `Y' here, you + compile in support for Compact Flash devices directly connected to + a SuperH processor. A Compact Flash FAQ is available at + <http://www.compactflash.org/faqs/faq.htm>. + + If your board has "Directly Connected" CompactFlash at area 5 or 6, + you may want to enable this option. Then, you can use CF as + primary IDE drive (only tested for SanDisk). + + If in doubt, select 'N'. + +choice + prompt "Compact Flash Connection Area" + depends on CF_ENABLER + default CF_AREA6 + +config CF_AREA5 + bool "Area5" + help + If your board has "Directly Connected" CompactFlash, You should + select the area where your CF is connected to. + + - "Area5" if CompactFlash is connected to Area 5 (0x14000000) + - "Area6" if it is connected to Area 6 (0x18000000) + + "Area6" will work for most boards. For ADX, select "Area5". + +config CF_AREA6 + bool "Area6" + +endchoice + +config CF_BASE_ADDR + hex + depends on CF_ENABLER + default "0xb8000000" if CF_AREA6 + default "0xb4000000" if CF_AREA5 + +# The SH7750 RTC module is disabled in the Dreamcast +config SH_RTC + bool + depends on !SH_DREAMCAST && !SH_SATURN && !SH_7300_SOLUTION_ENGINE && !SH_73180_SOLUTION_ENGINE + default y + help + Selecting this option will allow the Linux kernel to emulate + PC's RTC. + + If unsure, say N. + +config SH_FPU + bool "FPU support" + depends on !CPU_SH3 + default y + help + Selecting this option will enable support for SH processors that + have FPU units (ie, SH77xx). + + This option must be set in order to enable the FPU. + +config SH_DSP + bool "DSP support" + depends on !CPU_SH4 + default y + help + Selecting this option will enable support for SH processors that + have DSP units (ie, SH2-DSP and SH3-DSP). It is safe to say Y here + by default, as the existance of the DSP will be probed at runtime. + + This option must be set in order to enable the DSP. + +config SH_ADC + bool "ADC support" + depends on CPU_SH3 + default y + help + Selecting this option will allow the Linux kernel to use SH3 on-chip + ADC module. + + If unsure, say N. + +config SH_HP600 + bool + depends on SH_HP620 || SH_HP680 || SH_HP690 + default y + +config CPU_SUBTYPE_ST40 + bool + depends on CPU_SUBTYPE_ST40STB1 || CPU_SUBTYPE_ST40GX1 + default y + +config DISCONTIGMEM + bool + depends on SH_HP690 + default y + help + Say Y to upport efficient handling of discontiguous physical memory, + for architectures which are either NUMA (Non-Uniform Memory Access) + or have huge holes in the physical address space for other reasons. + See <file:Documentation/vm/numa> for more. + +config ZERO_PAGE_OFFSET + hex "Zero page offset" + default "0x00001000" if !(SH_MPC1211 || SH_SH03) + default "0x00004000" if SH_MPC1211 || SH_SH03 + help + This sets the default offset of zero page. + +# XXX: needs to lose subtype for system type +config ST40_LMI_MEMORY + bool "Memory on LMI" + depends on CPU_SUBTYPE_ST40STB1 + +config MEMORY_START + hex + depends on CPU_SUBTYPE_ST40STB1 && ST40_LMI_MEMORY + default "0x08000000" + +config MEMORY_SIZE + hex + depends on CPU_SUBTYPE_ST40STB1 && ST40_LMI_MEMORY + default "0x00400000" + +config MEMORY_SET + bool + depends on CPU_SUBTYPE_ST40STB1 && ST40_LMI_MEMORY + default y + +config BOOT_LINK_OFFSET + hex "Link address offset for booting" + default "0x00800000" + help + This option allows you to set the link address offset of the zImage. + This can be useful if you are on a board which has a small amount of + memory. + +config CPU_LITTLE_ENDIAN + bool "Little Endian" + help + Some SuperH machines can be configured for either little or big + endian byte order. These modes require different kernels. Say Y if + your machine is little endian, N if it's a big endian machine. + +config PREEMPT + bool "Preemptible Kernel (EXPERIMENTAL)" + depends on EXPERIMENTAL + +config UBC_WAKEUP + bool "Wakeup UBC on startup" + help + Selecting this option will wakeup the User Break Controller (UBC) on + startup. Although the UBC is left in an awake state when the processor + comes up, some boot loaders misbehave by putting the UBC to sleep in a + power saving state, which causes issues with things like ptrace(). + + If unsure, say N. + +config SH_WRITETHROUGH + bool "Use write-through caching" + default y if CPU_SH2 + help + Selecting this option will configure the caches in write-through + mode, as opposed to the default write-back configuration. + + Since there's sill some aliasing issues on SH-4, this option will + unfortunately still require the majority of flushing functions to + be implemented to deal with aliasing. + + If unsure, say N. + +config SH_OCRAM + bool "Operand Cache RAM (OCRAM) support" + help + Selecting this option will automatically tear down the number of + sets in the dcache by half, which in turn exposes a memory range. + + The addresses for the OC RAM base will vary according to the + processor version. Consult vendor documentation for specifics. + + If unsure, say N. + +config SH_STORE_QUEUES + bool "Support for Store Queues" + depends on CPU_SH4 + help + Selecting this option will enable an in-kernel API for manipulating + the store queues integrated in the SH-4 processors. + +config SMP + bool "Symmetric multi-processing support" + ---help--- + This enables support for systems with more than one CPU. If you have + a system with only one CPU, like most personal computers, say N. If + you have a system with more than one CPU, say Y. + + If you say N here, the kernel will run on single and multiprocessor + machines, but will use only one CPU of a multiprocessor machine. If + you say Y here, the kernel will run on many, but not all, + singleprocessor machines. On a singleprocessor machine, the kernel + will run faster if you say N here. + + People using multiprocessor machines who say Y here should also say + Y to "Enhanced Real Time Clock Support", below. + + See also the <file:Documentation/smp.txt>, + <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available + at <http://www.tldp.org/docs.html#howto>. + + If you don't know what to do here, say N. + +config NR_CPUS + int "Maximum number of CPUs (2-32)" + range 2 32 + depends on SMP + default "2" + help + This allows you to specify the maximum number of CPUs which this + kernel will support. The maximum supported value is 32 and the + minimum value which makes sense is 2. + + This is purely to save memory - each supported CPU adds + approximately eight kilobytes to the kernel image. + +config HS7751RVOIP_CODEC + bool "Support VoIP Codec section" + depends on SH_HS7751RVOIP + help + Selecting this option will support CODEC section. + +config RTS7751R2D_REV11 + bool "RTS7751R2D Rev. 1.1 board support" + depends on SH_RTS7751R2D + help + Selecting this option will support version rev. 1.1. + +config SH_PCLK_CALC + bool + default n if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH73180 + default y + help + This option will cause the PCLK value to be probed at run-time. It + will display a notification if the probed value has greater than a + 1% variance of the hardcoded CONFIG_SH_PCLK_FREQ. + +config SH_PCLK_FREQ + int "Peripheral clock frequency (in Hz)" + default "50000000" if CPU_SUBTYPE_SH7750 + default "60000000" if CPU_SUBTYPE_SH7751 + default "33333333" if CPU_SUBTYPE_SH7300 + default "27000000" if CPU_SUBTYPE_SH73180 + default "66000000" if CPU_SUBTYPE_SH4_202 + default "1193182" + help + This option is used to specify the peripheral clock frequency. This + option must be set for each processor in order for the kernel to + function reliably. If no sane default exists, we use a default from + the legacy i8254. Any discrepancies will be reported on boot time + with an auto-probed frequency which should be considered the proper + value for your hardware. + +menu "CPU Frequency scaling" + +source "drivers/cpufreq/Kconfig" + +config SH_CPU_FREQ + tristate "SuperH CPU Frequency driver" + depends on CPU_FREQ + select CPU_FREQ_TABLE + help + This adds the cpufreq driver for SuperH. At present, only + the SH-4 is supported. + + For details, take a look at <file:Documentation/cpu-freq>. + + If unsure, say N. + +endmenu + +source "arch/sh/drivers/dma/Kconfig" + +source "arch/sh/cchips/Kconfig" + +config HEARTBEAT + bool "Heartbeat LED" + depends on SH_MPC1211 || SH_SH03 || SH_CAT68701 || SH_STB1_HARP || SH_STB1_OVERDRIVE || SH_BIGSUR || SH_7751_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_RTS7751R2D || SH_SH4202_MICRODEV + help + Use the power-on LED on your machine as a load meter. The exact + behavior is platform-dependent, but normally the flash frequency is + a hyperbolic function of the 5-minute load average. + +config RTC_9701JE + tristate "EPSON RTC-9701JE support" + depends on SH_RTS7751R2D + help + Selecting this option will support EPSON RTC-9701JE. + +endmenu + + +menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" + +# Even on SuperH devices which don't have an ISA bus, +# this variable helps the PCMCIA modules handle +# IRQ requesting properly -- Greg Banks. +# +# Though we're generally not interested in it when +# we're not using PCMCIA, so we make it dependent on +# PCMCIA outright. -- PFM. +config ISA + bool + default y if PCMCIA || SMC91X + help + Find out whether you have ISA slots on your motherboard. ISA is the + name of a bus system, i.e. the way the CPU talks to the other stuff + inside your box. Other bus systems are PCI, EISA, MicroChannel + (MCA) or VESA. ISA is an older system, now being displaced by PCI; + newer boards don't support it. If you have ISA, say Y, otherwise N. + +config EISA + bool + ---help--- + The Extended Industry Standard Architecture (EISA) bus was + developed as an open alternative to the IBM MicroChannel bus. + + The EISA bus provided some of the features of the IBM MicroChannel + bus while maintaining backward compatibility with cards made for + the older ISA bus. The EISA bus saw limited use between 1988 and + 1995 when it was made obsolete by the PCI bus. + + Say Y here if you are building a kernel for an EISA-based machine. + + Otherwise, say N. + +config MCA + bool + help + MicroChannel Architecture is found in some IBM PS/2 machines and + laptops. It is a bus system similar to PCI or ISA. See + <file:Documentation/mca.txt> (and especially the web page given + there) before attempting to build an MCA bus kernel. + +config SBUS + bool + +config MAPLE + tristate "Maple Bus support" + depends on SH_DREAMCAST + default y + +source "arch/sh/drivers/pci/Kconfig" + +source "drivers/pci/Kconfig" + +source "drivers/pcmcia/Kconfig" + +source "drivers/pci/hotplug/Kconfig" + +endmenu + +menu "Executable file formats" + +source "fs/Kconfig.binfmt" + +endmenu + +menu "SH initrd options" + depends on BLK_DEV_INITRD + +config EMBEDDED_RAMDISK + bool "Embed root filesystem ramdisk into the kernel" + +config EMBEDDED_RAMDISK_IMAGE + string "Filename of gziped ramdisk image" + depends on EMBEDDED_RAMDISK + default "ramdisk.gz" + help + This is the filename of the ramdisk image to be built into the + kernel. Relative pathnames are relative to arch/sh/ramdisk/. + The ramdisk image is not part of the kernel distribution; you must + provide one yourself. + +endmenu + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "arch/sh/oprofile/Kconfig" + +source "arch/sh/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug new file mode 100644 index 00000000000..3fab181da36 --- /dev/null +++ b/arch/sh/Kconfig.debug @@ -0,0 +1,124 @@ +menu "Kernel hacking" + +source "lib/Kconfig.debug" + +config SH_STANDARD_BIOS + bool "Use LinuxSH standard BIOS" + help + Say Y here if your target has the gdb-sh-stub + package from www.m17n.org (or any conforming standard LinuxSH BIOS) + in FLASH or EPROM. The kernel will use standard BIOS calls during + boot for various housekeeping tasks (including calls to read and + write characters to a system console, get a MAC address from an + on-board Ethernet interface, and shut down the hardware). Note this + does not work with machines with an existing operating system in + mask ROM and no flash (WindowsCE machines fall in this category). + If unsure, say N. + +config EARLY_SCIF_CONSOLE + bool "Use early SCIF console" + depends on CPU_SH4 + +config EARLY_PRINTK + bool "Early printk support" + depends on SH_STANDARD_BIOS || EARLY_SCIF_CONSOLE + help + Say Y here to redirect kernel printk messages to the serial port + used by the SH-IPL bootloader, starting very early in the boot + process and ending when the kernel's serial console is initialised. + This option is only useful porting the kernel to a new machine, + when the kernel may crash or hang before the serial console is + initialised. If unsure, say N. + +config KGDB + bool "Include KGDB kernel debugger" + help + Include in-kernel hooks for kgdb, the Linux kernel source level + debugger. See <http://kgdb.sourceforge.net/> for more information. + Unless you are intending to debug the kernel, say N here. + +menu "KGDB configuration options" + depends on KGDB + +config MORE_COMPILE_OPTIONS + bool "Add any additional compile options" + help + If you want to add additional CFLAGS to the kernel build, enable this + option and then enter what you would like to add in the next question. + Note however that -g is already appended with the selection of KGDB. + +config COMPILE_OPTIONS + string "Additional compile arguments" + depends on MORE_COMPILE_OPTIONS + +config KGDB_NMI + bool "Enter KGDB on NMI" + default n + +config KGDB_THREAD + bool "Include KGDB thread support" + default y + +config SH_KGDB_CONSOLE + bool "Console messages through GDB" + default n + +config KGDB_SYSRQ + bool "Allow SysRq 'G' to enter KGDB" + default y + +config KGDB_KERNEL_ASSERTS + bool "Include KGDB kernel assertions" + default n + +comment "Serial port setup" + +config KGDB_DEFPORT + int "Port number (ttySCn)" + default "1" + +config KGDB_DEFBAUD + int "Baud rate" + default "115200" + +choice + prompt "Parity" + depends on KGDB + default KGDB_DEFPARITY_N + +config KGDB_DEFPARITY_N + bool "None" + +config KGDB_DEFPARITY_E + bool "Even" + +config KGDB_DEFPARITY_O + bool "Odd" + +endchoice + +choice + prompt "Data bits" + depends on KGDB + default KGDB_DEFBITS_8 + +config KGDB_DEFBITS_8 + bool "8" + +config KGDB_DEFBITS_7 + bool "7" + +endchoice + +endmenu + +config FRAME_POINTER + bool "Compile the kernel with frame pointers" + default y if KGDB + help + If you say Y here the resulting kernel image will be slightly larger + and slower, but it will give very useful debugging information. + If you don't debug the kernel, you can say N, but we may not be able + to solve problems without frame pointers. + +endmenu diff --git a/arch/sh/Makefile b/arch/sh/Makefile new file mode 100644 index 00000000000..b5635635b5e --- /dev/null +++ b/arch/sh/Makefile @@ -0,0 +1,183 @@ +# $Id: Makefile,v 1.35 2004/04/15 03:39:20 sugioka Exp $ +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1999 Kaz Kojima +# Copyright (C) 2002, 2003, 2004 Paul Mundt +# Copyright (C) 2002 M. R. Brown +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. Remember to do have actions +# for "archclean" and "archdep" for cleaning up and making dependencies for +# this architecture +# + +cflags-y := -mb +cflags-$(CONFIG_CPU_LITTLE_ENDIAN) := -ml + +cflags-$(CONFIG_CPU_SH2) += -m2 +cflags-$(CONFIG_CPU_SH3) += -m3 +cflags-$(CONFIG_CPU_SH4) += -m4 \ + $(call cc-option,-mno-implicit-fp,-m4-nofpu) + +cflags-$(CONFIG_SH_DSP) += -Wa,-dsp +cflags-$(CONFIG_SH_KGDB) += -g + +cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \ + $(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g') + +OBJCOPYFLAGS := -O binary -R .note -R .comment -R .stab -R .stabstr -S + +# +# arch/sh/defconfig doesn't reflect any real hardware, and as such should +# never be used by anyone. Use a board-specific defconfig that has a +# reasonable chance of being current instead. +# +KBUILD_DEFCONFIG := rts7751r2d_defconfig + +# +# Choosing incompatible machines durings configuration will result in +# error messages during linking. +# +LDFLAGS_vmlinux += -e _stext + +ifdef CONFIG_CPU_LITTLE_ENDIAN +LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64' +LDFLAGS += -EL +else +LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' +LDFLAGS += -EB +endif + +CFLAGS += -pipe $(cflags-y) +AFLAGS += $(cflags-y) + +head-y := arch/sh/kernel/head.o arch/sh/kernel/init_task.o + +LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) + +core-y += arch/sh/kernel/ arch/sh/mm/ + +# +# ramdisk/initrd support +# You need a compressed ramdisk image, named +# CONFIG_EMBEDDED_RAMDISK_IMAGE. Relative pathnames +# are relative to arch/sh/ramdisk/. +# +core-$(CONFIG_EMBEDDED_RAMDISK) += arch/sh/ramdisk/ + +# Boards +machdir-$(CONFIG_SH_SOLUTION_ENGINE) := se/770x +machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se/7751 +machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300 +machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se/73180 +machdir-$(CONFIG_SH_STB1_HARP) := harp +machdir-$(CONFIG_SH_STB1_OVERDRIVE) := overdrive +machdir-$(CONFIG_SH_HP620) := hp6xx/hp620 +machdir-$(CONFIG_SH_HP680) := hp6xx/hp680 +machdir-$(CONFIG_SH_HP690) := hp6xx/hp690 +machdir-$(CONFIG_SH_CQREEK) := cqreek +machdir-$(CONFIG_SH_DMIDA) := dmida +machdir-$(CONFIG_SH_EC3104) := ec3104 +machdir-$(CONFIG_SH_SATURN) := saturn +machdir-$(CONFIG_SH_DREAMCAST) := dreamcast +machdir-$(CONFIG_SH_CAT68701) := cat68701 +machdir-$(CONFIG_SH_BIGSUR) := bigsur +machdir-$(CONFIG_SH_SH2000) := sh2000 +machdir-$(CONFIG_SH_ADX) := adx +machdir-$(CONFIG_SH_MPC1211) := mpc1211 +machdir-$(CONFIG_SH_SH03) := sh03 +machdir-$(CONFIG_SH_SECUREEDGE5410) := snapgear +machdir-$(CONFIG_SH_HS7751RVOIP) := renesas/hs7751rvoip +machdir-$(CONFIG_SH_RTS7751R2D) := renesas/rts7751r2d +machdir-$(CONFIG_SH_7751_SYSTEMH) := renesas/systemh +machdir-$(CONFIG_SH_EDOSK7705) := renesas/edosk7705 +machdir-$(CONFIG_SH_SH4202_MICRODEV) := superh/microdev +machdir-$(CONFIG_SH_UNKNOWN) := unknown + +incdir-y := $(notdir $(machdir-y)) + +incdir-$(CONFIG_SH_SOLUTION_ENGINE) := se +incdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se7751 +incdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se7300 +incdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se73180 +incdir-$(CONFIG_SH_HP600) := hp6xx + +ifneq ($(machdir-y),) +core-y += arch/sh/boards/$(machdir-y)/ +endif + +# Companion chips +core-$(CONFIG_HD64461) += arch/sh/cchips/hd6446x/hd64461/ +core-$(CONFIG_HD64465) += arch/sh/cchips/hd6446x/hd64465/ +core-$(CONFIG_VOYAGERGX) += arch/sh/cchips/voyagergx/ + +cpuincdir-$(CONFIG_CPU_SH2) := cpu-sh2 +cpuincdir-$(CONFIG_CPU_SH3) := cpu-sh3 +cpuincdir-$(CONFIG_CPU_SH4) := cpu-sh4 + +libs-y := arch/sh/lib/ $(libs-y) $(LIBGCC) + +drivers-y += arch/sh/drivers/ +drivers-$(CONFIG_OPROFILE) += arch/sh/oprofile/ + +boot := arch/sh/boot + +CPPFLAGS_vmlinux.lds := -traditional + +# Update machine arch and proc symlinks if something which affects +# them changed. We use .arch and .mach to indicate when they were +# updated last, otherwise make uses the target directory mtime. + +include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) include/config/MARKER + @echo ' SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)' +ifneq ($(KBUILD_SRC),) + $(Q)mkdir -p include/asm-sh + $(Q)ln -fsn $(srctree)/include/asm-sh/$(cpuincdir-y) include/asm-sh/cpu +else + $(Q)ln -fsn $(cpuincdir-y) include/asm-sh/cpu +endif + @touch $@ + +include/asm-sh/.mach: $(wildcard include/config/sh/*.h) include/config/MARKER + @echo ' SYMLINK include/asm-sh/mach -> include/asm-sh/$(incdir-y)' +ifneq ($(KBUILD_SRC),) + $(Q)mkdir -p include/asm-sh + $(Q)ln -fsn $(srctree)/include/asm-sh/$(incdir-y) include/asm-sh/mach +else + $(Q)ln -fsn $(incdir-y) include/asm-sh/mach +endif + @touch $@ + + +prepare: maketools include/asm-sh/.cpu include/asm-sh/.mach + +.PHONY: maketools FORCE +maketools: include/asm-sh/asm-offsets.h include/linux/version.h FORCE + $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h + +all: zImage + +zImage: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +compressed: zImage + +archclean: + $(Q)$(MAKE) $(clean)=$(boot) + +CLEAN_FILES += include/asm-sh/machtypes.h include/asm-sh/asm-offsets.h + +arch/sh/kernel/asm-offsets.s: include/asm include/linux/version.h \ + include/asm-sh/.cpu include/asm-sh/.mach + +include/asm-sh/asm-offsets.h: arch/sh/kernel/asm-offsets.s + $(call filechk,gen-asm-offsets) + + +define archhelp + @echo ' zImage - Compressed kernel image (arch/sh/boot/zImage)' +endef + diff --git a/arch/sh/boards/adx/Makefile b/arch/sh/boards/adx/Makefile new file mode 100644 index 00000000000..5b1c531b399 --- /dev/null +++ b/arch/sh/boards/adx/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for ADX boards +# + +obj-y := setup.o irq.o irq_maskreq.o + diff --git a/arch/sh/boards/adx/irq.c b/arch/sh/boards/adx/irq.c new file mode 100644 index 00000000000..c6ca409dff9 --- /dev/null +++ b/arch/sh/boards/adx/irq.c @@ -0,0 +1,31 @@ +/* + * linux/arch/sh/boards/adx/irq.c + * + * Copyright (C) 2001 A&D Co., Ltd. + * + * I/O routine and setup routines for A&D ADX Board + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#include <asm/irq.h> + +void init_adx_IRQ(void) +{ + int i; + +/* printk("init_adx_IRQ()\n");*/ + /* setup irq_mask_register */ + irq_mask_register = (unsigned short *)0xa6000008; + + /* cover all external interrupt area by maskreg_irq_type + * (Actually, irq15 doesn't exist) + */ + for (i = 0; i < 16; i++) { + make_maskreg_irq(i); + disable_irq(i); + } +} diff --git a/arch/sh/boards/adx/irq_maskreg.c b/arch/sh/boards/adx/irq_maskreg.c new file mode 100644 index 00000000000..ca91bb0f1f5 --- /dev/null +++ b/arch/sh/boards/adx/irq_maskreg.c @@ -0,0 +1,107 @@ +/* + * linux/arch/sh/kernel/irq_maskreg.c + * + * Copyright (C) 2001 A&D Co., Ltd. <http://www.aandd.co.jp> + * + * This file may be copied or modified under the terms of the GNU + * General Public License. See linux/COPYING for more information. + * + * Interrupt handling for Simple external interrupt mask register + * + * This is for the machine which have single 16 bit register + * for masking external IRQ individually. + * Each bit of the register is for masking each interrupt. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/machvec.h> + +/* address of external interrupt mask register + * address must be set prior to use these (maybe in init_XXX_irq()) + * XXX : is it better to use .config than specifying it in code? */ +unsigned short *irq_mask_register = 0; + +/* forward declaration */ +static unsigned int startup_maskreg_irq(unsigned int irq); +static void shutdown_maskreg_irq(unsigned int irq); +static void enable_maskreg_irq(unsigned int irq); +static void disable_maskreg_irq(unsigned int irq); +static void mask_and_ack_maskreg(unsigned int); +static void end_maskreg_irq(unsigned int irq); + +/* hw_interrupt_type */ +static struct hw_interrupt_type maskreg_irq_type = { + " Mask Register", + startup_maskreg_irq, + shutdown_maskreg_irq, + enable_maskreg_irq, + disable_maskreg_irq, + mask_and_ack_maskreg, + end_maskreg_irq +}; + +/* actual implementatin */ +static unsigned int startup_maskreg_irq(unsigned int irq) +{ + enable_maskreg_irq(irq); + return 0; /* never anything pending */ +} + +static void shutdown_maskreg_irq(unsigned int irq) +{ + disable_maskreg_irq(irq); +} + +static void disable_maskreg_irq(unsigned int irq) +{ + if (irq_mask_register) { + unsigned long flags; + unsigned short val, mask = 0x01 << irq; + + /* Set "irq"th bit */ + local_irq_save(flags); + val = ctrl_inw((unsigned long)irq_mask_register); + val |= mask; + ctrl_outw(val, (unsigned long)irq_mask_register); + local_irq_restore(flags); + } +} + +static void enable_maskreg_irq(unsigned int irq) +{ + if (irq_mask_register) { + unsigned long flags; + unsigned short val, mask = ~(0x01 << irq); + + /* Clear "irq"th bit */ + local_irq_save(flags); + val = ctrl_inw((unsigned long)irq_mask_register); + val &= mask; + ctrl_outw(val, (unsigned long)irq_mask_register); + local_irq_restore(flags); + } +} + +static void mask_and_ack_maskreg(unsigned int irq) +{ + disable_maskreg_irq(irq); +} + +static void end_maskreg_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_maskreg_irq(irq); +} + +void make_maskreg_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &maskreg_irq_type; + disable_maskreg_irq(irq); +} diff --git a/arch/sh/boards/adx/setup.c b/arch/sh/boards/adx/setup.c new file mode 100644 index 00000000000..4938d959234 --- /dev/null +++ b/arch/sh/boards/adx/setup.c @@ -0,0 +1,56 @@ +/* + * linux/arch/sh/board/adx/setup.c + * + * Copyright (C) 2001 A&D Co., Ltd. + * + * I/O routine and setup routines for A&D ADX Board + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#include <asm/machvec.h> +#include <linux/module.h> + +extern void init_adx_IRQ(void); +extern void *cf_io_base; + +const char *get_system_type(void) +{ + return "A&D ADX"; +} + +unsigned long adx_isa_port2addr(unsigned long offset) +{ + /* CompactFlash (IDE) */ + if (((offset >= 0x1f0) && (offset <= 0x1f7)) || (offset == 0x3f6)) { + return (unsigned long)cf_io_base + offset; + } + + /* eth0 */ + if ((offset >= 0x300) && (offset <= 0x30f)) { + return 0xa5000000 + offset; /* COMM BOARD (AREA1) */ + } + + return offset + 0xb0000000; /* IOBUS (AREA 4)*/ +} + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_adx __initmv = { + .mv_nr_irqs = 48, + .mv_isa_port2addr = adx_isa_port2addr, + .mv_init_irq = init_adx_IRQ, +}; +ALIAS_MV(adx) + +int __init platform_setup(void) +{ + /* Nothing to see here .. */ + return 0; +} + diff --git a/arch/sh/boards/bigsur/Makefile b/arch/sh/boards/bigsur/Makefile new file mode 100644 index 00000000000..0ff9497ac58 --- /dev/null +++ b/arch/sh/boards/bigsur/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the BigSur specific parts of the kernel +# + +obj-y := setup.o io.o irq.o led.o + diff --git a/arch/sh/boards/bigsur/io.c b/arch/sh/boards/bigsur/io.c new file mode 100644 index 00000000000..697144de741 --- /dev/null +++ b/arch/sh/boards/bigsur/io.c @@ -0,0 +1,125 @@ +/* + * include/asm-sh/io_bigsur.c + * + * By Dustin McIntire (dustin@sensoria.com) (c)2001 + * Derived from io_hd64465.h, which bore the message: + * By Greg Banks <gbanks@pocketpenguins.com> + * (c) 2000 PocketPenguins Inc. + * and from io_hd64461.h, which bore the message: + * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * IO functions for a Hitachi Big Sur Evaluation Board. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <asm/machvec.h> +#include <asm/io.h> +#include <asm/bigsur/bigsur.h> + +/* Low iomap maps port 0-1K to addresses in 8byte chunks */ +#define BIGSUR_IOMAP_LO_THRESH 0x400 +#define BIGSUR_IOMAP_LO_SHIFT 3 +#define BIGSUR_IOMAP_LO_MASK ((1<<BIGSUR_IOMAP_LO_SHIFT)-1) +#define BIGSUR_IOMAP_LO_NMAP (BIGSUR_IOMAP_LO_THRESH>>BIGSUR_IOMAP_LO_SHIFT) +static u32 bigsur_iomap_lo[BIGSUR_IOMAP_LO_NMAP]; +static u8 bigsur_iomap_lo_shift[BIGSUR_IOMAP_LO_NMAP]; + +/* High iomap maps port 1K-64K to addresses in 1K chunks */ +#define BIGSUR_IOMAP_HI_THRESH 0x10000 +#define BIGSUR_IOMAP_HI_SHIFT 10 +#define BIGSUR_IOMAP_HI_MASK ((1<<BIGSUR_IOMAP_HI_SHIFT)-1) +#define BIGSUR_IOMAP_HI_NMAP (BIGSUR_IOMAP_HI_THRESH>>BIGSUR_IOMAP_HI_SHIFT) +static u32 bigsur_iomap_hi[BIGSUR_IOMAP_HI_NMAP]; +static u8 bigsur_iomap_hi_shift[BIGSUR_IOMAP_HI_NMAP]; + +#ifndef MAX +#define MAX(a,b) ((a)>(b)?(a):(b)) +#endif + +void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift) +{ + u32 port, endport = baseport + nports; + + pr_debug("bigsur_port_map(base=0x%0x, n=0x%0x, addr=0x%08x)\n", + baseport, nports, addr); + + for (port = baseport ; + port < endport && port < BIGSUR_IOMAP_LO_THRESH ; + port += (1<<BIGSUR_IOMAP_LO_SHIFT)) { + pr_debug(" maplo[0x%x] = 0x%08x\n", port, addr); + bigsur_iomap_lo[port>>BIGSUR_IOMAP_LO_SHIFT] = addr; + bigsur_iomap_lo_shift[port>>BIGSUR_IOMAP_LO_SHIFT] = shift; + addr += (1<<(BIGSUR_IOMAP_LO_SHIFT)); + } + + for (port = MAX(baseport, BIGSUR_IOMAP_LO_THRESH) ; + port < endport && port < BIGSUR_IOMAP_HI_THRESH ; + port += (1<<BIGSUR_IOMAP_HI_SHIFT)) { + pr_debug(" maphi[0x%x] = 0x%08x\n", port, addr); + bigsur_iomap_hi[port>>BIGSUR_IOMAP_HI_SHIFT] = addr; + bigsur_iomap_hi_shift[port>>BIGSUR_IOMAP_HI_SHIFT] = shift; + addr += (1<<(BIGSUR_IOMAP_HI_SHIFT)); + } +} +EXPORT_SYMBOL(bigsur_port_map); + +void bigsur_port_unmap(u32 baseport, u32 nports) +{ + u32 port, endport = baseport + nports; + + pr_debug("bigsur_port_unmap(base=0x%0x, n=0x%0x)\n", baseport, nports); + + for (port = baseport ; + port < endport && port < BIGSUR_IOMAP_LO_THRESH ; + port += (1<<BIGSUR_IOMAP_LO_SHIFT)) { + bigsur_iomap_lo[port>>BIGSUR_IOMAP_LO_SHIFT] = 0; + } + + for (port = MAX(baseport, BIGSUR_IOMAP_LO_THRESH) ; + port < endport && port < BIGSUR_IOMAP_HI_THRESH ; + port += (1<<BIGSUR_IOMAP_HI_SHIFT)) { + bigsur_iomap_hi[port>>BIGSUR_IOMAP_HI_SHIFT] = 0; + } +} +EXPORT_SYMBOL(bigsur_port_unmap); + +unsigned long bigsur_isa_port2addr(unsigned long port) +{ + unsigned long addr = 0; + unsigned char shift; + + /* Physical address not in P0, do nothing */ + if (PXSEG(port)) { + addr = port; + /* physical address in P0, map to P2 */ + } else if (port >= 0x30000) { + addr = P2SEGADDR(port); + /* Big Sur I/O + HD64465 registers 0x10000-0x30000 */ + } else if (port >= BIGSUR_IOMAP_HI_THRESH) { + addr = BIGSUR_INTERNAL_BASE + (port - BIGSUR_IOMAP_HI_THRESH); + /* Handle remapping of high IO/PCI IO ports */ + } else if (port >= BIGSUR_IOMAP_LO_THRESH) { + addr = bigsur_iomap_hi[port >> BIGSUR_IOMAP_HI_SHIFT]; + shift = bigsur_iomap_hi_shift[port >> BIGSUR_IOMAP_HI_SHIFT]; + + if (addr != 0) + addr += (port & BIGSUR_IOMAP_HI_MASK) << shift; + } else { + /* Handle remapping of low IO ports */ + addr = bigsur_iomap_lo[port >> BIGSUR_IOMAP_LO_SHIFT]; + shift = bigsur_iomap_lo_shift[port >> BIGSUR_IOMAP_LO_SHIFT]; + + if (addr != 0) + addr += (port & BIGSUR_IOMAP_LO_MASK) << shift; + } + + pr_debug("%s(0x%08lx) = 0x%08lx\n", __FUNCTION__, port, addr); + + return addr; +} + diff --git a/arch/sh/boards/bigsur/irq.c b/arch/sh/boards/bigsur/irq.c new file mode 100644 index 00000000000..c188fc32dc9 --- /dev/null +++ b/arch/sh/boards/bigsur/irq.c @@ -0,0 +1,348 @@ +/* + * + * By Dustin McIntire (dustin@sensoria.com) (c)2001 + * + * Setup and IRQ handling code for the HD64465 companion chip. + * by Greg Banks <gbanks@pocketpenguins.com> + * Copyright (c) 2000 PocketPenguins Inc + * + * Derived from setup_hd64465.c which bore the message: + * Greg Banks <gbanks@pocketpenguins.com> + * Copyright (c) 2000 PocketPenguins Inc and + * Copyright (C) 2000 YAEGASHI Takeshi + * and setup_cqreek.c which bore message: + * Copyright (C) 2000 Niibe Yutaka + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * IRQ functions for a Hitachi Big Sur Evaluation Board. + * + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/bitops.h> + +#include <asm/io.h> +#include <asm/irq.h> + +#include <asm/bigsur/io.h> +#include <asm/hd64465/hd64465.h> +#include <asm/bigsur/bigsur.h> + +//#define BIGSUR_DEBUG 3 +#undef BIGSUR_DEBUG + +#ifdef BIGSUR_DEBUG +#define DPRINTK(args...) printk(args) +#define DIPRINTK(n, args...) if (BIGSUR_DEBUG>(n)) printk(args) +#else +#define DPRINTK(args...) +#define DIPRINTK(n, args...) +#endif /* BIGSUR_DEBUG */ + +#ifdef CONFIG_HD64465 +extern int hd64465_irq_demux(int irq); +#endif /* CONFIG_HD64465 */ + + +/*===========================================================*/ +// Big Sur CPLD IRQ Routines +/*===========================================================*/ + +/* Level 1 IRQ routines */ +static void disable_bigsur_l1irq(unsigned int irq) +{ + unsigned long flags; + unsigned char mask; + unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; + unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); + + if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { + DPRINTK("Disable L1 IRQ %d\n", irq); + DIPRINTK(2,"disable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", + mask_port, bit); + local_irq_save(flags); + + /* Disable IRQ - set mask bit */ + mask = inb(mask_port) | bit; + outb(mask, mask_port); + local_irq_restore(flags); + return; + } + DPRINTK("disable_bigsur_l1irq: Invalid IRQ %d\n", irq); +} + +static void enable_bigsur_l1irq(unsigned int irq) +{ + unsigned long flags; + unsigned char mask; + unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; + unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); + + if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { + DPRINTK("Enable L1 IRQ %d\n", irq); + DIPRINTK(2,"enable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", + mask_port, bit); + local_irq_save(flags); + /* Enable L1 IRQ - clear mask bit */ + mask = inb(mask_port) & ~bit; + outb(mask, mask_port); + local_irq_restore(flags); + return; + } + DPRINTK("enable_bigsur_l1irq: Invalid IRQ %d\n", irq); +} + + +/* Level 2 irq masks and registers for L2 decoding */ +/* Level2 bitmasks for each level 1 IRQ */ +const u32 bigsur_l2irq_mask[] = + {0x40,0x80,0x08,0x01,0x01,0x3C,0x3E,0xFF,0x40,0x80,0x06,0x03}; +/* Level2 to ISR[n] map for each level 1 IRQ */ +const u32 bigsur_l2irq_reg[] = + { 2, 2, 3, 3, 1, 2, 1, 0, 1, 1, 3, 2}; +/* Level2 to Level 1 IRQ map */ +const u32 bigsur_l2_l1_map[] = + {7,7,7,7,7,7,7,7, 4,6,6,6,6,6,8,9, 11,11,5,5,5,5,0,1, 3,10,10,2,-1,-1,-1,-1}; +/* IRQ inactive level (high or low) */ +const u32 bigsur_l2_inactv_state[] = {0x00, 0xBE, 0xFC, 0xF7}; + +/* CPLD external status and mask registers base and offsets */ +static const u32 isr_base = BIGSUR_IRQ0; +static const u32 isr_offset = BIGSUR_IRQ0 - BIGSUR_IRQ1; +static const u32 imr_base = BIGSUR_IMR0; +static const u32 imr_offset = BIGSUR_IMR0 - BIGSUR_IMR1; + +#define REG_NUM(irq) ((irq-BIGSUR_2NDLVL_IRQ_LOW)/8 ) + +/* Level 2 IRQ routines */ +static void disable_bigsur_l2irq(unsigned int irq) +{ + unsigned long flags; + unsigned char mask; + unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); + unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; + + if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { + DPRINTK("Disable L2 IRQ %d\n", irq); + DIPRINTK(2,"disable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", + mask_port, bit); + local_irq_save(flags); + + /* Disable L2 IRQ - set mask bit */ + mask = inb(mask_port) | bit; + outb(mask, mask_port); + local_irq_restore(flags); + return; + } + DPRINTK("disable_bigsur_l2irq: Invalid IRQ %d\n", irq); +} + +static void enable_bigsur_l2irq(unsigned int irq) +{ + unsigned long flags; + unsigned char mask; + unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); + unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; + + if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { + DPRINTK("Enable L2 IRQ %d\n", irq); + DIPRINTK(2,"enable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", + mask_port, bit); + local_irq_save(flags); + + /* Enable L2 IRQ - clear mask bit */ + mask = inb(mask_port) & ~bit; + outb(mask, mask_port); + local_irq_restore(flags); + return; + } + DPRINTK("enable_bigsur_l2irq: Invalid IRQ %d\n", irq); +} + +static void mask_and_ack_bigsur(unsigned int irq) +{ + DPRINTK("mask_and_ack_bigsur IRQ %d\n", irq); + if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) + disable_bigsur_l1irq(irq); + else + disable_bigsur_l2irq(irq); +} + +static void end_bigsur_irq(unsigned int irq) +{ + DPRINTK("end_bigsur_irq IRQ %d\n", irq); + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { + if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) + enable_bigsur_l1irq(irq); + else + enable_bigsur_l2irq(irq); + } +} + +static unsigned int startup_bigsur_irq(unsigned int irq) +{ + u8 mask; + u32 reg; + + DPRINTK("startup_bigsur_irq IRQ %d\n", irq); + + if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { + /* Enable the L1 IRQ */ + enable_bigsur_l1irq(irq); + /* Enable all L2 IRQs in this L1 IRQ */ + mask = ~(bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]); + reg = imr_base - bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW] * imr_offset; + mask &= inb(reg); + outb(mask,reg); + DIPRINTK(2,"startup_bigsur_irq: IMR=0x%08x mask=0x%x\n",reg,inb(reg)); + } + else { + /* Enable the L2 IRQ - clear mask bit */ + enable_bigsur_l2irq(irq); + /* Enable the L1 bit masking this L2 IRQ */ + enable_bigsur_l1irq(bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW]); + DIPRINTK(2,"startup_bigsur_irq: L1=%d L2=%d\n", + bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW],irq); + } + return 0; +} + +static void shutdown_bigsur_irq(unsigned int irq) +{ + DPRINTK("shutdown_bigsur_irq IRQ %d\n", irq); + if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) + disable_bigsur_l1irq(irq); + else + disable_bigsur_l2irq(irq); +} + +/* Define the IRQ structures for the L1 and L2 IRQ types */ +static struct hw_interrupt_type bigsur_l1irq_type = { + "BigSur-CPLD-Level1-IRQ", + startup_bigsur_irq, + shutdown_bigsur_irq, + enable_bigsur_l1irq, + disable_bigsur_l1irq, + mask_and_ack_bigsur, + end_bigsur_irq +}; + +static struct hw_interrupt_type bigsur_l2irq_type = { + "BigSur-CPLD-Level2-IRQ", + startup_bigsur_irq, + shutdown_bigsur_irq, + enable_bigsur_l2irq, + disable_bigsur_l2irq, + mask_and_ack_bigsur, + end_bigsur_irq +}; + + +static void make_bigsur_l1isr(unsigned int irq) { + + /* sanity check first */ + if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { + /* save the handler in the main description table */ + irq_desc[irq].handler = &bigsur_l1irq_type; + irq_desc[irq].status = IRQ_DISABLED; + irq_desc[irq].action = 0; + irq_desc[irq].depth = 1; + + disable_bigsur_l1irq(irq); + return; + } + DPRINTK("make_bigsur_l1isr: bad irq, %d\n", irq); + return; +} + +static void make_bigsur_l2isr(unsigned int irq) { + + /* sanity check first */ + if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { + /* save the handler in the main description table */ + irq_desc[irq].handler = &bigsur_l2irq_type; + irq_desc[irq].status = IRQ_DISABLED; + irq_desc[irq].action = 0; + irq_desc[irq].depth = 1; + + disable_bigsur_l2irq(irq); + return; + } + DPRINTK("make_bigsur_l2isr: bad irq, %d\n", irq); + return; +} + +/* The IRQ's will be decoded as follows: + * If a level 2 handler exists and there is an unmasked active + * IRQ, the 2nd level handler will be called. + * If a level 2 handler does not exist for the active IRQ + * the 1st level handler will be called. + */ + +int bigsur_irq_demux(int irq) +{ + int dmux_irq = irq; + u8 mask, actv_irqs; + u32 reg_num; + + DIPRINTK(3,"bigsur_irq_demux, irq=%d\n", irq); + /* decode the 1st level IRQ */ + if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { + /* Get corresponding L2 ISR bitmask and ISR number */ + mask = bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]; + reg_num = bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW]; + /* find the active IRQ's (XOR with inactive level)*/ + actv_irqs = inb(isr_base-reg_num*isr_offset) ^ + bigsur_l2_inactv_state[reg_num]; + /* decode active IRQ's */ + actv_irqs = actv_irqs & mask & ~(inb(imr_base-reg_num*imr_offset)); + /* if NEZ then we have an active L2 IRQ */ + if(actv_irqs) dmux_irq = ffz(~actv_irqs) + reg_num*8+BIGSUR_2NDLVL_IRQ_LOW; + /* if no 2nd level IRQ action, but has 1st level, use 1st level handler */ + if(!irq_desc[dmux_irq].action && irq_desc[irq].action) + dmux_irq = irq; + DIPRINTK(1,"bigsur_irq_demux: irq=%d dmux_irq=%d mask=0x%04x reg=%d\n", + irq, dmux_irq, mask, reg_num); + } +#ifdef CONFIG_HD64465 + dmux_irq = hd64465_irq_demux(dmux_irq); +#endif /* CONFIG_HD64465 */ + DIPRINTK(3,"bigsur_irq_demux, demux_irq=%d\n", dmux_irq); + + return dmux_irq; +} + +/*===========================================================*/ +// Big Sur Init Routines +/*===========================================================*/ +void __init init_bigsur_IRQ(void) +{ + int i; + + if (!MACH_BIGSUR) return; + + /* Create ISR's for Big Sur CPLD IRQ's */ + /*==============================================================*/ + for(i=BIGSUR_IRQ_LOW;i<BIGSUR_IRQ_HIGH;i++) + make_bigsur_l1isr(i); + + printk(KERN_INFO "Big Sur CPLD L1 interrupts %d to %d.\n", + BIGSUR_IRQ_LOW,BIGSUR_IRQ_HIGH); + + for(i=BIGSUR_2NDLVL_IRQ_LOW;i<BIGSUR_2NDLVL_IRQ_HIGH;i++) + make_bigsur_l2isr(i); + + printk(KERN_INFO "Big Sur CPLD L2 interrupts %d to %d.\n", + BIGSUR_2NDLVL_IRQ_LOW,BIGSUR_2NDLVL_IRQ_HIGH); + +} diff --git a/arch/sh/boards/bigsur/led.c b/arch/sh/boards/bigsur/led.c new file mode 100644 index 00000000000..0a2339c6944 --- /dev/null +++ b/arch/sh/boards/bigsur/led.c @@ -0,0 +1,55 @@ +/* + * linux/arch/sh/kernel/led_bigsur.c + * + * By Dustin McIntire (dustin@sensoria.com) (c)2001 + * Derived from led_se.c and led.c, which bore the message: + * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains Big Sur specific LED code. + */ + +#include <linux/config.h> +#include <asm/io.h> +#include <asm/bigsur/bigsur.h> + +static void mach_led(int position, int value) +{ + int word; + + word = bigsur_inl(BIGSUR_CSLR); + if (value) { + bigsur_outl(word & ~BIGSUR_LED, BIGSUR_CSLR); + } else { + bigsur_outl(word | BIGSUR_LED, BIGSUR_CSLR); + } +} + +#ifdef CONFIG_HEARTBEAT + +#include <linux/sched.h> + +/* Cycle the LED on/off */ +void heartbeat_bigsur(void) +{ + static unsigned cnt = 0, period = 0, dist = 0; + + if (cnt == 0 || cnt == dist) + mach_led( -1, 1); + else if (cnt == 7 || cnt == dist+7) + mach_led( -1, 0); + + if (++cnt > period) { + cnt = 0; + /* The hyperbolic function below modifies the heartbeat period + * length in dependency of the current (5min) load. It goes + * through the points f(0)=126, f(1)=86, f(5)=51, + * f(inf)->30. */ + period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30; + dist = period / 4; + } +} +#endif /* CONFIG_HEARTBEAT */ + diff --git a/arch/sh/boards/bigsur/setup.c b/arch/sh/boards/bigsur/setup.c new file mode 100644 index 00000000000..e69be05195f --- /dev/null +++ b/arch/sh/boards/bigsur/setup.c @@ -0,0 +1,96 @@ +/* + * + * By Dustin McIntire (dustin@sensoria.com) (c)2001 + * + * Setup and IRQ handling code for the HD64465 companion chip. + * by Greg Banks <gbanks@pocketpenguins.com> + * Copyright (c) 2000 PocketPenguins Inc + * + * Derived from setup_hd64465.c which bore the message: + * Greg Banks <gbanks@pocketpenguins.com> + * Copyright (c) 2000 PocketPenguins Inc and + * Copyright (C) 2000 YAEGASHI Takeshi + * and setup_cqreek.c which bore message: + * Copyright (C) 2000 Niibe Yutaka + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Setup functions for a Hitachi Big Sur Evaluation Board. + * + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/bitops.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/machvec.h> +#include <asm/bigsur/io.h> +#include <asm/hd64465/hd64465.h> +#include <asm/bigsur/bigsur.h> + +/*===========================================================*/ +// Big Sur Init Routines +/*===========================================================*/ + +const char *get_system_type(void) +{ + return "Big Sur"; +} + +/* + * The Machine Vector + */ +extern void heartbeat_bigsur(void); +extern void init_bigsur_IRQ(void); + +struct sh_machine_vector mv_bigsur __initmv = { + .mv_nr_irqs = NR_IRQS, // Defined in <asm/irq.h> + + .mv_isa_port2addr = bigsur_isa_port2addr, + .mv_irq_demux = bigsur_irq_demux, + + .mv_init_irq = init_bigsur_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_bigsur, +#endif +}; +ALIAS_MV(bigsur) + +int __init platform_setup(void) +{ + /* Mask all 2nd level IRQ's */ + outb(-1,BIGSUR_IMR0); + outb(-1,BIGSUR_IMR1); + outb(-1,BIGSUR_IMR2); + outb(-1,BIGSUR_IMR3); + + /* Mask 1st level interrupts */ + outb(-1,BIGSUR_IRLMR0); + outb(-1,BIGSUR_IRLMR1); + +#if defined (CONFIG_HD64465) && defined (CONFIG_SERIAL) + /* remap IO ports for first ISA serial port to HD64465 UART */ + bigsur_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1); +#endif /* CONFIG_HD64465 && CONFIG_SERIAL */ + /* TODO: setup IDE registers */ + bigsur_port_map(BIGSUR_IDECTL_IOPORT, 2, BIGSUR_ICTL, 8); + /* Setup the Ethernet port to BIGSUR_ETHER_IOPORT */ + bigsur_port_map(BIGSUR_ETHER_IOPORT, 16, BIGSUR_ETHR+BIGSUR_ETHER_IOPORT, 0); + /* set page to 1 */ + outw(1, BIGSUR_ETHR+0xe); + /* set the IO port to BIGSUR_ETHER_IOPORT */ + outw(BIGSUR_ETHER_IOPORT<<3, BIGSUR_ETHR+0x2); + + return 0; +} + diff --git a/arch/sh/boards/cat68701/Makefile b/arch/sh/boards/cat68701/Makefile new file mode 100644 index 00000000000..52c1de0a6df --- /dev/null +++ b/arch/sh/boards/cat68701/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the CAT-68701 specific parts of the kernel +# + +obj-y := setup.o irq.o + diff --git a/arch/sh/boards/cat68701/irq.c b/arch/sh/boards/cat68701/irq.c new file mode 100644 index 00000000000..f9a6d185fb8 --- /dev/null +++ b/arch/sh/boards/cat68701/irq.c @@ -0,0 +1,28 @@ +/* + * linux/arch/sh/boards/cat68701/irq.c + * + * Copyright (C) 2000 Niibe Yutaka + * 2001 Yutaro Ebihara + * + * Setup routines for A-ONE Corp CAT-68701 SH7708 Board + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#include <asm/irq.h> + +int cat68701_irq_demux(int irq) +{ + if(irq==13) return 14; + if(irq==7) return 10; + return irq; +} + +void init_cat68701_IRQ() +{ + make_imask_irq(10); + make_imask_irq(14); +} diff --git a/arch/sh/boards/cat68701/setup.c b/arch/sh/boards/cat68701/setup.c new file mode 100644 index 00000000000..ae8a350ade5 --- /dev/null +++ b/arch/sh/boards/cat68701/setup.c @@ -0,0 +1,86 @@ +/* + * linux/arch/sh/boards/cat68701/setup.c + * + * Copyright (C) 2000 Niibe Yutaka + * 2001 Yutaro Ebihara + * + * Setup routines for A-ONE Corp CAT-68701 SH7708 Board + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#include <asm/io.h> +#include <asm/machvec.h> +#include <asm/mach/io.h> +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sched.h> + +const char *get_system_type(void) +{ + return "CAT-68701"; +} + +#ifdef CONFIG_HEARTBEAT +void heartbeat_cat68701() +{ + static unsigned int cnt = 0, period = 0 , bit = 0; + cnt += 1; + if (cnt < period) { + return; + } + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 + */ + period = 110 - ( (300<<FSHIFT)/ + ((avenrun[0]/5) + (3<<FSHIFT)) ); + + if(bit){ bit=0; }else{ bit=1; } + outw(bit<<15,0x3fe); +} +#endif /* CONFIG_HEARTBEAT */ + +unsigned long cat68701_isa_port2addr(unsigned long offset) +{ + /* CompactFlash (IDE) */ + if (((offset >= 0x1f0) && (offset <= 0x1f7)) || (offset==0x3f6)) + return 0xba000000 + offset; + + /* INPUT PORT */ + if ((offset >= 0x3fc) && (offset <= 0x3fd)) + return 0xb4007000 + offset; + + /* OUTPUT PORT */ + if ((offset >= 0x3fe) && (offset <= 0x3ff)) + return 0xb4007400 + offset; + + return offset + 0xb4000000; /* other I/O (EREA 5)*/ +} + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_cat68701 __initmv = { + .mv_nr_irqs = 32, + .mv_isa_port2addr = cat68701_isa_port2addr, + .mv_irq_demux = cat68701_irq_demux, + + .mv_init_irq = init_cat68701_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_cat68701, +#endif +}; +ALIAS_MV(cat68701) + +int __init platform_setup(void) +{ + /* dummy read erea5 (CS8900A) */ +} + diff --git a/arch/sh/boards/cqreek/Makefile b/arch/sh/boards/cqreek/Makefile new file mode 100644 index 00000000000..1a788a85eba --- /dev/null +++ b/arch/sh/boards/cqreek/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the CqREEK specific parts of the kernel +# + +obj-y := setup.o irq.o + diff --git a/arch/sh/boards/cqreek/irq.c b/arch/sh/boards/cqreek/irq.c new file mode 100644 index 00000000000..fa6cfe5a20a --- /dev/null +++ b/arch/sh/boards/cqreek/irq.c @@ -0,0 +1,128 @@ +/* $Id: irq.c,v 1.1.2.4 2002/11/04 20:33:56 lethal Exp $ + * + * arch/sh/boards/cqreek/irq.c + * + * Copyright (C) 2000 Niibe Yutaka + * + * CqREEK IDE/ISA Bridge Support. + * + */ + +#include <linux/irq.h> +#include <linux/init.h> + +#include <asm/cqreek/cqreek.h> +#include <asm/io.h> +#include <asm/io_generic.h> +#include <asm/irq.h> +#include <asm/machvec.h> +#include <asm/machvec_init.h> +#include <asm/rtc.h> + +struct cqreek_irq_data { + unsigned short mask_port; /* Port of Interrupt Mask Register */ + unsigned short stat_port; /* Port of Interrupt Status Register */ + unsigned short bit; /* Value of the bit */ +}; +static struct cqreek_irq_data cqreek_irq_data[NR_IRQS]; + +static void disable_cqreek_irq(unsigned int irq) +{ + unsigned long flags; + unsigned short mask; + unsigned short mask_port = cqreek_irq_data[irq].mask_port; + unsigned short bit = cqreek_irq_data[irq].bit; + + local_irq_save(flags); + /* Disable IRQ */ + mask = inw(mask_port) & ~bit; + outw_p(mask, mask_port); + local_irq_restore(flags); +} + +static void enable_cqreek_irq(unsigned int irq) +{ + unsigned long flags; + unsigned short mask; + unsigned short mask_port = cqreek_irq_data[irq].mask_port; + unsigned short bit = cqreek_irq_data[irq].bit; + + local_irq_save(flags); + /* Enable IRQ */ + mask = inw(mask_port) | bit; + outw_p(mask, mask_port); + local_irq_restore(flags); +} + +static void mask_and_ack_cqreek(unsigned int irq) +{ + unsigned short stat_port = cqreek_irq_data[irq].stat_port; + unsigned short bit = cqreek_irq_data[irq].bit; + + disable_cqreek_irq(irq); + /* Clear IRQ (it might be edge IRQ) */ + inw(stat_port); + outw_p(bit, stat_port); +} + +static void end_cqreek_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_cqreek_irq(irq); +} + +static unsigned int startup_cqreek_irq(unsigned int irq) +{ + enable_cqreek_irq(irq); + return 0; +} + +static void shutdown_cqreek_irq(unsigned int irq) +{ + disable_cqreek_irq(irq); +} + +static struct hw_interrupt_type cqreek_irq_type = { + "CqREEK-IRQ", + startup_cqreek_irq, + shutdown_cqreek_irq, + enable_cqreek_irq, + disable_cqreek_irq, + mask_and_ack_cqreek, + end_cqreek_irq +}; + +int cqreek_has_ide, cqreek_has_isa; + +/* XXX: This is just for test for my NE2000 ISA board + What we really need is virtualized IRQ and demultiplexer like HP600 port */ +void __init init_cqreek_IRQ(void) +{ + if (cqreek_has_ide) { + cqreek_irq_data[14].mask_port = BRIDGE_IDE_INTR_MASK; + cqreek_irq_data[14].stat_port = BRIDGE_IDE_INTR_STAT; + cqreek_irq_data[14].bit = 1; + + irq_desc[14].handler = &cqreek_irq_type; + irq_desc[14].status = IRQ_DISABLED; + irq_desc[14].action = 0; + irq_desc[14].depth = 1; + + disable_cqreek_irq(14); + } + + if (cqreek_has_isa) { + cqreek_irq_data[10].mask_port = BRIDGE_ISA_INTR_MASK; + cqreek_irq_data[10].stat_port = BRIDGE_ISA_INTR_STAT; + cqreek_irq_data[10].bit = (1 << 10); + + /* XXX: Err... we may need demultiplexer for ISA irq... */ + irq_desc[10].handler = &cqreek_irq_type; + irq_desc[10].status = IRQ_DISABLED; + irq_desc[10].action = 0; + irq_desc[10].depth = 1; + + disable_cqreek_irq(10); + } +} + diff --git a/arch/sh/boards/cqreek/setup.c b/arch/sh/boards/cqreek/setup.c new file mode 100644 index 00000000000..29b537cd654 --- /dev/null +++ b/arch/sh/boards/cqreek/setup.c @@ -0,0 +1,101 @@ +/* $Id: setup.c,v 1.5 2003/08/04 01:51:58 lethal Exp $ + * + * arch/sh/kernel/setup_cqreek.c + * + * Copyright (C) 2000 Niibe Yutaka + * + * CqREEK IDE/ISA Bridge Support. + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/mach/cqreek.h> +#include <asm/machvec.h> +#include <asm/io.h> +#include <asm/io_generic.h> +#include <asm/irq.h> +#include <asm/rtc.h> + +#define IDE_OFFSET 0xA4000000UL +#define ISA_OFFSET 0xA4A00000UL + +const char *get_system_type(void) +{ + return "CqREEK"; +} + +static unsigned long cqreek_port2addr(unsigned long port) +{ + if (0x0000<=port && port<=0x0040) + return IDE_OFFSET + port; + if ((0x01f0<=port && port<=0x01f7) || port == 0x03f6) + return IDE_OFFSET + port; + + return ISA_OFFSET + port; +} + +/* + * The Machine Vector + */ +struct sh_machine_vector mv_cqreek __initmv = { +#if defined(CONFIG_CPU_SH4) + .mv_nr_irqs = 48, +#elif defined(CONFIG_CPU_SUBTYPE_SH7708) + .mv_nr_irqs = 32, +#elif defined(CONFIG_CPU_SUBTYPE_SH7709) + .mv_nr_irqs = 61, +#endif + + .mv_init_irq = init_cqreek_IRQ, + + .mv_isa_port2addr = cqreek_port2addr, +}; +ALIAS_MV(cqreek) + +/* + * Initialize the board + */ +void __init platform_setup(void) +{ + int i; +/* udelay is not available at setup time yet... */ +#define DELAY() do {for (i=0; i<10000; i++) ctrl_inw(0xa0000000);} while(0) + + if ((inw (BRIDGE_FEATURE) & 1)) { /* We have IDE interface */ + outw_p(0, BRIDGE_IDE_INTR_LVL); + outw_p(0, BRIDGE_IDE_INTR_MASK); + + outw_p(0, BRIDGE_IDE_CTRL); + DELAY(); + + outw_p(0x8000, BRIDGE_IDE_CTRL); + DELAY(); + + outw_p(0xffff, BRIDGE_IDE_INTR_STAT); /* Clear interrupt status */ + outw_p(0x0f-14, BRIDGE_IDE_INTR_LVL); /* Use 14 IPR */ + outw_p(1, BRIDGE_IDE_INTR_MASK); /* Enable interrupt */ + cqreek_has_ide=1; + } + + if ((inw (BRIDGE_FEATURE) & 2)) { /* We have ISA interface */ + outw_p(0, BRIDGE_ISA_INTR_LVL); + outw_p(0, BRIDGE_ISA_INTR_MASK); + + outw_p(0, BRIDGE_ISA_CTRL); + DELAY(); + outw_p(0x8000, BRIDGE_ISA_CTRL); + DELAY(); + + outw_p(0xffff, BRIDGE_ISA_INTR_STAT); /* Clear interrupt status */ + outw_p(0x0f-10, BRIDGE_ISA_INTR_LVL); /* Use 10 IPR */ + outw_p(0xfff8, BRIDGE_ISA_INTR_MASK); /* Enable interrupt */ + cqreek_has_isa=1; + } + + printk(KERN_INFO "CqREEK Setup (IDE=%d, ISA=%d)...done\n", cqreek_has_ide, cqreek_has_isa); +} + diff --git a/arch/sh/boards/dmida/Makefile b/arch/sh/boards/dmida/Makefile new file mode 100644 index 00000000000..75999aa0a2d --- /dev/null +++ b/arch/sh/boards/dmida/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the DataMyte Industrial Digital Assistant(tm) specific parts +# of the kernel +# + +obj-y := mach.o + diff --git a/arch/sh/boards/dmida/mach.c b/arch/sh/boards/dmida/mach.c new file mode 100644 index 00000000000..d03a25f989c --- /dev/null +++ b/arch/sh/boards/dmida/mach.c @@ -0,0 +1,59 @@ +/* + * linux/arch/sh/boards/dmida/mach.c + * + * by Greg Banks <gbanks@pocketpenguins.com> + * (c) 2000 PocketPenguins Inc + * + * Derived from mach_hp600.c, which bore the message: + * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Machine vector for the DataMyte Industrial Digital Assistant(tm). + * See http://www.dmida.com + * + */ + +#include <linux/init.h> + +#include <asm/machvec.h> +#include <asm/rtc.h> +#include <asm/machvec_init.h> + +#include <asm/io.h> +#include <asm/hd64465/hd64465.h> +#include <asm/irq.h> + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_dmida __initmv = { + .mv_nr_irqs = HD64465_IRQ_BASE+HD64465_IRQ_NUM, + + .mv_inb = hd64465_inb, + .mv_inw = hd64465_inw, + .mv_inl = hd64465_inl, + .mv_outb = hd64465_outb, + .mv_outw = hd64465_outw, + .mv_outl = hd64465_outl, + + .mv_inb_p = hd64465_inb_p, + .mv_inw_p = hd64465_inw, + .mv_inl_p = hd64465_inl, + .mv_outb_p = hd64465_outb_p, + .mv_outw_p = hd64465_outw, + .mv_outl_p = hd64465_outl, + + .mv_insb = hd64465_insb, + .mv_insw = hd64465_insw, + .mv_insl = hd64465_insl, + .mv_outsb = hd64465_outsb, + .mv_outsw = hd64465_outsw, + .mv_outsl = hd64465_outsl, + + .mv_irq_demux = hd64465_irq_demux, +}; +ALIAS_MV(dmida) + diff --git a/arch/sh/boards/dreamcast/Makefile b/arch/sh/boards/dreamcast/Makefile new file mode 100644 index 00000000000..7b97546c7e5 --- /dev/null +++ b/arch/sh/boards/dreamcast/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Sega Dreamcast specific parts of the kernel +# + +obj-y := setup.o irq.o rtc.o + diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c new file mode 100644 index 00000000000..b10a6b11c03 --- /dev/null +++ b/arch/sh/boards/dreamcast/irq.c @@ -0,0 +1,160 @@ +/* + * arch/sh/boards/dreamcast/irq.c + * + * Holly IRQ support for the Sega Dreamcast. + * + * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org> + * + * This file is part of the LinuxDC project (www.linuxdc.org) + * Released under the terms of the GNU GPL v2.0 + */ + +#include <linux/irq.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/dreamcast/sysasic.h> + +/* Dreamcast System ASIC Hardware Events - + + The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving + hardware events from system peripherals and triggering an SH7750 IRQ. + Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are + set in the Event Mask Registers (EMRs). When a hardware event is + triggered, it's corresponding bit in the Event Status Registers (ESRs) + is set, and that bit should be rewritten to the ESR to acknowledge that + event. + + There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908. Event + types can be found in include/asm-sh/dc_sysasic.h. There are three groups + of EMRs that parallel the ESRs. Each EMR group corresponds to an IRQ, so + 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928 triggers + IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9. + + In the kernel, these events are mapped to virtual IRQs so that drivers can + respond to them as they would a normal interrupt. In order to keep this + mapping simple, the events are mapped as: + + 6900/6910 - Events 0-31, IRQ 13 + 6904/6924 - Events 32-63, IRQ 11 + 6908/6938 - Events 64-95, IRQ 9 + +*/ + +#define ESR_BASE 0x005f6900 /* Base event status register */ +#define EMR_BASE 0x005f6910 /* Base event mask register */ + +/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910, + 1 = 0x6920, 2 = 0x6930; also determine the event offset */ +#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32) + +/* Return the hardware event's bit positon within the EMR/ESR */ +#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31) + +/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ + (logically mapped to the corresponding bit for the hardware event). */ + +/* Disable the hardware event by masking its bit in its EMR */ +static inline void disable_systemasic_irq(unsigned int irq) +{ + unsigned long flags; + __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); + __u32 mask; + + local_irq_save(flags); + mask = inl(emr); + mask &= ~(1 << EVENT_BIT(irq)); + outl(mask, emr); + local_irq_restore(flags); +} + +/* Enable the hardware event by setting its bit in its EMR */ +static inline void enable_systemasic_irq(unsigned int irq) +{ + unsigned long flags; + __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); + __u32 mask; + + local_irq_save(flags); + mask = inl(emr); + mask |= (1 << EVENT_BIT(irq)); + outl(mask, emr); + local_irq_restore(flags); +} + +/* Acknowledge a hardware event by writing its bit back to its ESR */ +static void ack_systemasic_irq(unsigned int irq) +{ + __u32 esr = ESR_BASE + (LEVEL(irq) << 2); + disable_systemasic_irq(irq); + outl((1 << EVENT_BIT(irq)), esr); +} + +/* After a IRQ has been ack'd and responded to, it needs to be renabled */ +static void end_systemasic_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_systemasic_irq(irq); +} + +static unsigned int startup_systemasic_irq(unsigned int irq) +{ + enable_systemasic_irq(irq); + + return 0; +} + +static void shutdown_systemasic_irq(unsigned int irq) +{ + disable_systemasic_irq(irq); +} + +struct hw_interrupt_type systemasic_int = { + .typename = "System ASIC", + .startup = startup_systemasic_irq, + .shutdown = shutdown_systemasic_irq, + .enable = enable_systemasic_irq, + .disable = disable_systemasic_irq, + .ack = ack_systemasic_irq, + .end = end_systemasic_irq, +}; + +/* + * Map the hardware event indicated by the processor IRQ to a virtual IRQ. + */ +int systemasic_irq_demux(int irq) +{ + __u32 emr, esr, status, level; + __u32 j, bit; + + switch (irq) { + case 13: + level = 0; + break; + case 11: + level = 1; + break; + case 9: + level = 2; + break; + default: + return irq; + } + emr = EMR_BASE + (level << 4) + (level << 2); + esr = ESR_BASE + (level << 2); + + /* Mask the ESR to filter any spurious, unwanted interrtupts */ + status = inl(esr); + status &= inl(emr); + + /* Now scan and find the first set bit as the event to map */ + for (bit = 1, j = 0; j < 32; bit <<= 1, j++) { + if (status & bit) { + irq = HW_EVENT_IRQ_BASE + j + (level << 5); + return irq; + } + } + + /* Not reached */ + return irq; +} diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/dreamcast/rtc.c new file mode 100644 index 00000000000..379de162913 --- /dev/null +++ b/arch/sh/boards/dreamcast/rtc.c @@ -0,0 +1,81 @@ +/* arch/sh/kernel/rtc-aica.c + * + * Dreamcast AICA RTC routines. + * + * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org> + * Copyright (c) 2002 Paul Mundt <lethal@chaoticdreams.org> + * + * Released under the terms of the GNU GPL v2.0. + * + */ + +#include <linux/time.h> + +#include <asm/io.h> + +extern void (*rtc_get_time)(struct timespec *); +extern int (*rtc_set_time)(const time_t); + +/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in + seconds to get the standard Unix Epoch when getting the time, and add 20 + years when setting the time. */ +#define TWENTY_YEARS ((20 * 365LU + 5) * 86400) + +/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit + registers.*/ +#define AICA_RTC_SECS_H 0xa0710000 +#define AICA_RTC_SECS_L 0xa0710004 + +/** + * aica_rtc_gettimeofday - Get the time from the AICA RTC + * @ts: pointer to resulting timespec + * + * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch. + */ +void aica_rtc_gettimeofday(struct timespec *ts) { + unsigned long val1, val2; + + do { + val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + + val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + } while (val1 != val2); + + ts->tv_sec = val1 - TWENTY_YEARS; + + /* Can't get nanoseconds with just a seconds counter. */ + ts->tv_nsec = 0; +} + +/** + * aica_rtc_settimeofday - Set the AICA RTC to the current time + * @secs: contains the time_t to set + * + * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter. + */ +int aica_rtc_settimeofday(const time_t secs) { + unsigned long val1, val2; + unsigned long adj = secs + TWENTY_YEARS; + + do { + ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H); + ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L); + + val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + + val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + } while (val1 != val2); + + return 0; +} + +void aica_time_init(void) +{ + rtc_get_time = aica_rtc_gettimeofday; + rtc_set_time = aica_rtc_settimeofday; +} + diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c new file mode 100644 index 00000000000..55dece35cde --- /dev/null +++ b/arch/sh/boards/dreamcast/setup.c @@ -0,0 +1,83 @@ +/* + * arch/sh/boards/dreamcast/setup.c + * + * Hardware support for the Sega Dreamcast. + * + * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@linuxdc.org> + * Copyright (c) 2002, 2003, 2004 Paul Mundt <lethal@linux-sh.org> + * + * This file is part of the LinuxDC project (www.linuxdc.org) + * + * Released under the terms of the GNU GPL v2.0. + * + * This file originally bore the message (with enclosed-$): + * Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp + * SEGA Dreamcast support + */ + +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/device.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/machvec.h> +#include <asm/machvec_init.h> +#include <asm/mach/sysasic.h> + +extern struct hw_interrupt_type systemasic_int; +/* XXX: Move this into it's proper header. */ +extern void (*board_time_init)(void); +extern void aica_time_init(void); +extern int gapspci_init(void); +extern int systemasic_irq_demux(int); + +void *dreamcast_consistent_alloc(struct device *, size_t, dma_addr_t *, int); +int dreamcast_consistent_free(struct device *, size_t, void *, dma_addr_t); + +const char *get_system_type(void) +{ + return "Sega Dreamcast"; +} + +struct sh_machine_vector mv_dreamcast __initmv = { + .mv_nr_irqs = NR_IRQS, + + .mv_irq_demux = systemasic_irq_demux, + +#ifdef CONFIG_PCI + .mv_consistent_alloc = dreamcast_consistent_alloc, + .mv_consistent_free = dreamcast_consistent_free, +#endif +}; +ALIAS_MV(dreamcast) + +int __init platform_setup(void) +{ + int i; + + /* Mask all hardware events */ + /* XXX */ + + /* Acknowledge any previous events */ + /* XXX */ + + __set_io_port_base(0xa0000000); + + /* Assign all virtual IRQs to the System ASIC int. handler */ + for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) + irq_desc[i].handler = &systemasic_int; + + board_time_init = aica_time_init; + +#ifdef CONFIG_PCI + if (gapspci_init() < 0) + printk(KERN_WARNING "GAPSPCI was not detected.\n"); +#endif + + return 0; +} diff --git a/arch/sh/boards/ec3104/Makefile b/arch/sh/boards/ec3104/Makefile new file mode 100644 index 00000000000..178891534b6 --- /dev/null +++ b/arch/sh/boards/ec3104/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the EC3104 specific parts of the kernel +# + +obj-y := setup.o io.o irq.o + diff --git a/arch/sh/boards/ec3104/io.c b/arch/sh/boards/ec3104/io.c new file mode 100644 index 00000000000..a70928c4475 --- /dev/null +++ b/arch/sh/boards/ec3104/io.c @@ -0,0 +1,81 @@ +/* + * linux/arch/sh/kernel/io_ec3104.c + * EC3104 companion chip support + * + * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> + * + */ +/* EC3104 note: + * This code was written without any documentation about the EC3104 chip. While + * I hope I got most of the basic functionality right, the register names I use + * are most likely completely different from those in the chip documentation. + * + * If you have any further information about the EC3104, please tell me + * (prumpf@tux.org). + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/page.h> +#include <asm/ec3104/ec3104.h> + +/* + * EC3104 has a real ISA bus which we redirect low port accesses to (the + * actual device on mine is a ESS 1868, and I don't want to hack the driver + * more than strictly necessary). I am not going to duplicate the + * hard coding of PC addresses (for the 16550s aso) here though; it's just + * too ugly. + */ + +#define low_port(port) ((port) < 0x10000) + +static inline unsigned long port2addr(unsigned long port) +{ + switch(port >> 16) { + case 0: + return EC3104_ISA_BASE + port * 2; + + /* XXX hack. it's unclear what to do about the serial ports */ + case 1: + return EC3104_BASE + (port&0xffff) * 4; + + default: + /* XXX PCMCIA */ + return 0; + } +} + +unsigned char ec3104_inb(unsigned long port) +{ + u8 ret; + + ret = *(volatile u8 *)port2addr(port); + + return ret; +} + +unsigned short ec3104_inw(unsigned long port) +{ + BUG(); +} + +unsigned long ec3104_inl(unsigned long port) +{ + BUG(); +} + +void ec3104_outb(unsigned char data, unsigned long port) +{ + *(volatile u8 *)port2addr(port) = data; +} + +void ec3104_outw(unsigned short data, unsigned long port) +{ + BUG(); +} + +void ec3104_outl(unsigned long data, unsigned long port) +{ + BUG(); +} diff --git a/arch/sh/boards/ec3104/irq.c b/arch/sh/boards/ec3104/irq.c new file mode 100644 index 00000000000..ffa4ff1f090 --- /dev/null +++ b/arch/sh/boards/ec3104/irq.c @@ -0,0 +1,196 @@ +/* + * linux/arch/sh/boards/ec3104/irq.c + * EC3104 companion chip support + * + * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> + * + */ + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/ec3104/ec3104.h> + +/* This is for debugging mostly; here's the table that I intend to keep + * in here: + * + * index function base addr power interrupt bit + * 0 power b0ec0000 --- 00000001 (unused) + * 1 irqs b0ec1000 --- 00000002 (unused) + * 2 ?? b0ec2000 b0ec0008 00000004 + * 3 PS2 (1) b0ec3000 b0ec000c 00000008 + * 4 PS2 (2) b0ec4000 b0ec0010 00000010 + * 5 ?? b0ec5000 b0ec0014 00000020 + * 6 I2C b0ec6000 b0ec0018 00000040 + * 7 serial (1) b0ec7000 b0ec001c 00000080 + * 8 serial (2) b0ec8000 b0ec0020 00000100 + * 9 serial (3) b0ec9000 b0ec0024 00000200 + * 10 serial (4) b0eca000 b0ec0028 00000400 + * 12 GPIO (1) b0ecc000 b0ec0030 + * 13 GPIO (2) b0ecc000 b0ec0030 + * 16 pcmcia (1) b0ed0000 b0ec0040 00010000 + * 17 pcmcia (2) b0ed1000 b0ec0044 00020000 + */ + +/* I used the register names from another interrupt controller I worked with, + * since it seems to be identical to the ec3104 except that all bits are + * inverted: + * + * IRR: Interrupt Request Register (pending and enabled interrupts) + * IMR: Interrupt Mask Register (which interrupts are enabled) + * IPR: Interrupt Pending Register (pending interrupts, even disabled ones) + * + * 0 bits mean pending or enabled, 1 bits mean not pending or disabled. all + * IRQs seem to be level-triggered. + */ + +#define EC3104_IRR (EC3104_BASE + 0x1000) +#define EC3104_IMR (EC3104_BASE + 0x1004) +#define EC3104_IPR (EC3104_BASE + 0x1008) + +#define ctrl_readl(addr) (*(volatile u32 *)(addr)) +#define ctrl_writel(data,addr) (*(volatile u32 *)(addr) = (data)) +#define ctrl_readb(addr) (*(volatile u8 *)(addr)) + +static char *ec3104_name(unsigned index) +{ + switch(index) { + case 0: + return "power management"; + case 1: + return "interrupts"; + case 3: + return "PS2 (1)"; + case 4: + return "PS2 (2)"; + case 5: + return "I2C (1)"; + case 6: + return "I2C (2)"; + case 7: + return "serial (1)"; + case 8: + return "serial (2)"; + case 9: + return "serial (3)"; + case 10: + return "serial (4)"; + case 16: + return "pcmcia (1)"; + case 17: + return "pcmcia (2)"; + default: { + static char buf[32]; + + sprintf(buf, "unknown (%d)", index); + + return buf; + } + } +} + +int get_pending_interrupts(char *buf) +{ + u32 ipr; + u32 bit; + char *p = buf; + + p += sprintf(p, "pending: ("); + + ipr = ctrl_inl(EC3104_IPR); + + for (bit = 1; bit < 32; bit++) + if (!(ipr & (1<<bit))) + p += sprintf(p, "%s ", ec3104_name(bit)); + + p += sprintf(p, ")\n"); + + return p - buf; +} + +static inline u32 ec3104_irq2mask(unsigned int irq) +{ + return (1 << (irq - EC3104_IRQBASE)); +} + +static inline void mask_ec3104_irq(unsigned int irq) +{ + u32 mask; + + mask = ctrl_readl(EC3104_IMR); + + mask |= ec3104_irq2mask(irq); + + ctrl_writel(mask, EC3104_IMR); +} + +static inline void unmask_ec3104_irq(unsigned int irq) +{ + u32 mask; + + mask = ctrl_readl(EC3104_IMR); + + mask &= ~ec3104_irq2mask(irq); + + ctrl_writel(mask, EC3104_IMR); +} + +static void disable_ec3104_irq(unsigned int irq) +{ + mask_ec3104_irq(irq); +} + +static void enable_ec3104_irq(unsigned int irq) +{ + unmask_ec3104_irq(irq); +} + +static void mask_and_ack_ec3104_irq(unsigned int irq) +{ + mask_ec3104_irq(irq); +} + +static void end_ec3104_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + unmask_ec3104_irq(irq); +} + +static unsigned int startup_ec3104_irq(unsigned int irq) +{ + unmask_ec3104_irq(irq); + + return 0; +} + +static void shutdown_ec3104_irq(unsigned int irq) +{ + mask_ec3104_irq(irq); + +} + +static struct hw_interrupt_type ec3104_int = { + .typename = "EC3104", + .enable = enable_ec3104_irq, + .disable = disable_ec3104_irq, + .ack = mask_and_ack_ec3104_irq, + .end = end_ec3104_irq, + .startup = startup_ec3104_irq, + .shutdown = shutdown_ec3104_irq, +}; + +/* Yuck. the _demux API is ugly */ +int ec3104_irq_demux(int irq) +{ + if (irq == EC3104_IRQ) { + unsigned int mask; + + mask = ctrl_readl(EC3104_IRR); + + if (mask == 0xffffffff) + return EC3104_IRQ; + else + return EC3104_IRQBASE + ffz(mask); + } + + return irq; +} diff --git a/arch/sh/boards/ec3104/setup.c b/arch/sh/boards/ec3104/setup.c new file mode 100644 index 00000000000..5130ba2b6ff --- /dev/null +++ b/arch/sh/boards/ec3104/setup.c @@ -0,0 +1,78 @@ +/* + * linux/arch/sh/boards/ec3104/setup.c + * EC3104 companion chip support + * + * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> + * + */ +/* EC3104 note: + * This code was written without any documentation about the EC3104 chip. While + * I hope I got most of the basic functionality right, the register names I use + * are most likely completely different from those in the chip documentation. + * + * If you have any further information about the EC3104, please tell me + * (prumpf@tux.org). + */ + +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/types.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/machvec.h> +#include <asm/mach/ec3104.h> + +const char *get_system_type(void) +{ + return "EC3104"; +} + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_ec3104 __initmv = { + .mv_nr_irqs = 96, + + .mv_inb = ec3104_inb, + .mv_inw = ec3104_inw, + .mv_inl = ec3104_inl, + .mv_outb = ec3104_outb, + .mv_outw = ec3104_outw, + .mv_outl = ec3104_outl, + + .mv_irq_demux = ec3104_irq_demux, +}; + +ALIAS_MV(ec3104) + +int __init platform_setup(void) +{ + char str[8]; + int i; + + if (0) + return 0; + + for (i=0; i<8; i++) + str[i] = ctrl_readb(EC3104_BASE + i); + + for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++) + irq_desc[i].handler = &ec3104_int; + + printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n", + str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE); + + + /* mask all interrupts. this should have been done by the boot + * loader for us but we want to be sure ... */ + ctrl_writel(0xffffffff, EC3104_IMR); + + return 0; +} + diff --git a/arch/sh/boards/harp/Makefile b/arch/sh/boards/harp/Makefile new file mode 100644 index 00000000000..eb753d31812 --- /dev/null +++ b/arch/sh/boards/harp/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for STMicroelectronics board specific parts of the kernel +# + +obj-y := irq.o setup.o mach.o led.o + +obj-$(CONFIG_PCI) += pcidma.o + diff --git a/arch/sh/boards/harp/irq.c b/arch/sh/boards/harp/irq.c new file mode 100644 index 00000000000..acd58489970 --- /dev/null +++ b/arch/sh/boards/harp/irq.c @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Looks after interrupts on the HARP board. + * + * Bases on the IPR irq system + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/harp/harp.h> + + +#define NUM_EXTERNAL_IRQS 16 + +// Early versions of the STB1 Overdrive required this nasty frig +//#define INVERT_INTMASK_WRITES + +static void enable_harp_irq(unsigned int irq); +static void disable_harp_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_harp_irq disable_harp_irq + +static void mask_and_ack_harp(unsigned int); +static void end_harp_irq(unsigned int irq); + +static unsigned int startup_harp_irq(unsigned int irq) +{ + enable_harp_irq(irq); + return 0; /* never anything pending */ +} + +static struct hw_interrupt_type harp_irq_type = { + "Harp-IRQ", + startup_harp_irq, + shutdown_harp_irq, + enable_harp_irq, + disable_harp_irq, + mask_and_ack_harp, + end_harp_irq +}; + +static void disable_harp_irq(unsigned int irq) +{ + unsigned val, flags; + unsigned maskReg; + unsigned mask; + int pri; + + if (irq < 0 || irq >= NUM_EXTERNAL_IRQS) + return; + + pri = 15 - irq; + + if (pri < 8) { + maskReg = EPLD_INTMASK0; + } else { + maskReg = EPLD_INTMASK1; + pri -= 8; + } + + local_irq_save(flags); + mask = ctrl_inl(maskReg); + mask &= (~(1 << pri)); +#if defined(INVERT_INTMASK_WRITES) + mask ^= 0xff; +#endif + ctrl_outl(mask, maskReg); + local_irq_restore(flags); +} + +static void enable_harp_irq(unsigned int irq) +{ + unsigned flags; + unsigned maskReg; + unsigned mask; + int pri; + + if (irq < 0 || irq >= NUM_EXTERNAL_IRQS) + return; + + pri = 15 - irq; + + if (pri < 8) { + maskReg = EPLD_INTMASK0; + } else { + maskReg = EPLD_INTMASK1; + pri -= 8; + } + + local_irq_save(flags); + mask = ctrl_inl(maskReg); + + + mask |= (1 << pri); + +#if defined(INVERT_INTMASK_WRITES) + mask ^= 0xff; +#endif + ctrl_outl(mask, maskReg); + + local_irq_restore(flags); +} + +/* This functions sets the desired irq handler to be an overdrive type */ +static void __init make_harp_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &harp_irq_type; + disable_harp_irq(irq); +} + +static void mask_and_ack_harp(unsigned int irq) +{ + disable_harp_irq(irq); +} + +static void end_harp_irq(unsigned int irq) +{ + enable_harp_irq(irq); +} + +void __init init_harp_irq(void) +{ + int i; + +#if !defined(INVERT_INTMASK_WRITES) + // On the harp these are set to enable an interrupt + ctrl_outl(0x00, EPLD_INTMASK0); + ctrl_outl(0x00, EPLD_INTMASK1); +#else + // On the Overdrive the data is inverted before being stored in the reg + ctrl_outl(0xff, EPLD_INTMASK0); + ctrl_outl(0xff, EPLD_INTMASK1); +#endif + + for (i = 0; i < NUM_EXTERNAL_IRQS; i++) { + make_harp_irq(i); + } +} diff --git a/arch/sh/boards/harp/led.c b/arch/sh/boards/harp/led.c new file mode 100644 index 00000000000..76ca4ccac70 --- /dev/null +++ b/arch/sh/boards/harp/led.c @@ -0,0 +1,52 @@ +/* + * linux/arch/sh/stboards/led.c + * + * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains ST40STB1 HARP and compatible code. + */ + +#include <linux/config.h> +#include <asm/io.h> +#include <asm/harp/harp.h> + +/* Harp: Flash LD10 (front pannel) connected to EPLD (IC8) */ +/* Overdrive: Flash LD1 (front panel) connected to EPLD (IC4) */ +/* Works for HARP and overdrive */ +static void mach_led(int position, int value) +{ + if (value) { + ctrl_outl(EPLD_LED_ON, EPLD_LED); + } else { + ctrl_outl(EPLD_LED_OFF, EPLD_LED); + } +} + +#ifdef CONFIG_HEARTBEAT + +#include <linux/sched.h> + +/* acts like an actual heart beat -- ie thump-thump-pause... */ +void heartbeat_harp(void) +{ + static unsigned cnt = 0, period = 0, dist = 0; + + if (cnt == 0 || cnt == dist) + mach_led( -1, 1); + else if (cnt == 7 || cnt == dist+7) + mach_led( -1, 0); + + if (++cnt > period) { + cnt = 0; + /* The hyperbolic function below modifies the heartbeat period + * length in dependency of the current (5min) load. It goes + * through the points f(0)=126, f(1)=86, f(5)=51, + * f(inf)->30. */ + period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30; + dist = period / 4; + } +} +#endif diff --git a/arch/sh/boards/harp/mach.c b/arch/sh/boards/harp/mach.c new file mode 100644 index 00000000000..a946dd1674c --- /dev/null +++ b/arch/sh/boards/harp/mach.c @@ -0,0 +1,62 @@ +/* + * linux/arch/sh/boards/harp/mach.c + * + * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Machine vector for the STMicroelectronics STB1 HARP and compatible boards + */ + +#include <linux/init.h> + +#include <asm/machvec.h> +#include <asm/rtc.h> +#include <asm/machvec_init.h> +#include <asm/hd64465/io.h> +#include <asm/hd64465/hd64465.h> + +void setup_harp(void); +void init_harp_irq(void); +void heartbeat_harp(void); + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_harp __initmv = { + .mv_nr_irqs = 89 + HD64465_IRQ_NUM, + + .mv_inb = hd64465_inb, + .mv_inw = hd64465_inw, + .mv_inl = hd64465_inl, + .mv_outb = hd64465_outb, + .mv_outw = hd64465_outw, + .mv_outl = hd64465_outl, + + .mv_inb_p = hd64465_inb_p, + .mv_inw_p = hd64465_inw, + .mv_inl_p = hd64465_inl, + .mv_outb_p = hd64465_outb_p, + .mv_outw_p = hd64465_outw, + .mv_outl_p = hd64465_outl, + + .mv_insb = hd64465_insb, + .mv_insw = hd64465_insw, + .mv_insl = hd64465_insl, + .mv_outsb = hd64465_outsb, + .mv_outsw = hd64465_outsw, + .mv_outsl = hd64465_outsl, + + .mv_isa_port2addr = hd64465_isa_port2addr, + +#ifdef CONFIG_PCI + .mv_init_irq = init_harp_irq, +#endif +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_harp, +#endif +}; + +ALIAS_MV(harp) diff --git a/arch/sh/boards/harp/pcidma.c b/arch/sh/boards/harp/pcidma.c new file mode 100644 index 00000000000..475311390fd --- /dev/null +++ b/arch/sh/boards/harp/pcidma.c @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Dynamic DMA mapping support. + */ + +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/pci.h> +#include <asm/io.h> +#include <asm/addrspace.h> + + +void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, + dma_addr_t * dma_handle) +{ + void *ret; + int gfp = GFP_ATOMIC; + + ret = (void *) __get_free_pages(gfp, get_order(size)); + + if (ret != NULL) { + /* Is it neccessary to do the memset? */ + memset(ret, 0, size); + *dma_handle = virt_to_bus(ret); + } + /* We must flush the cache before we pass it on to the device */ + flush_cache_all(); + return P2SEGADDR(ret); +} + +void pci_free_consistent(struct pci_dev *hwdev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + unsigned long p1addr=P1SEGADDR((unsigned long)vaddr); + + free_pages(p1addr, get_order(size)); +} diff --git a/arch/sh/boards/harp/setup.c b/arch/sh/boards/harp/setup.c new file mode 100644 index 00000000000..05b01b8f40a --- /dev/null +++ b/arch/sh/boards/harp/setup.c @@ -0,0 +1,91 @@ +/* + * arch/sh/stboard/setup.c + * + * Copyright (C) 2001 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * STMicroelectronics ST40STB1 HARP and compatible support. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/io.h> +#include <asm/harp/harp.h> + +const char *get_system_type(void) +{ + return "STB1 Harp"; +} + +/* + * Initialize the board + */ +int __init platform_setup(void) +{ +#ifdef CONFIG_SH_STB1_HARP + unsigned long ic8_version, ic36_version; + + ic8_version = ctrl_inl(EPLD_REVID2); + ic36_version = ctrl_inl(EPLD_REVID1); + + printk("STMicroelectronics STB1 HARP initialisaton\n"); + printk("EPLD versions: IC8: %d.%02d, IC36: %d.%02d\n", + (ic8_version >> 4) & 0xf, ic8_version & 0xf, + (ic36_version >> 4) & 0xf, ic36_version & 0xf); +#elif defined(CONFIG_SH_STB1_OVERDRIVE) + unsigned long version; + + version = ctrl_inl(EPLD_REVID); + + printk("STMicroelectronics STB1 Overdrive initialisaton\n"); + printk("EPLD version: %d.%02d\n", + (version >> 4) & 0xf, version & 0xf); +#else +#error Undefined machine +#endif + + /* Currently all STB1 chips have problems with the sleep instruction, + * so disable it here. + */ + disable_hlt(); + + return 0; +} + +/* + * pcibios_map_platform_irq + * + * This is board specific and returns the IRQ for a given PCI device. + * It is used by the PCI code (arch/sh/kernel/st40_pci*) + * + */ + +#define HARP_PCI_IRQ 1 +#define HARP_BRIDGE_IRQ 2 +#define OVERDRIVE_SLOT0_IRQ 0 + + +int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + switch (slot) { +#ifdef CONFIG_SH_STB1_HARP + case 2: /*This is the PCI slot on the */ + return HARP_PCI_IRQ; + case 1: /* this is the bridge */ + return HARP_BRIDGE_IRQ; +#elif defined(CONFIG_SH_STB1_OVERDRIVE) + case 1: + case 2: + case 3: + return slot - 1; +#else +#error Unknown board +#endif + default: + return -1; + } +} + diff --git a/arch/sh/boards/hp6xx/hp620/Makefile b/arch/sh/boards/hp6xx/hp620/Makefile new file mode 100644 index 00000000000..20691dbce34 --- /dev/null +++ b/arch/sh/boards/hp6xx/hp620/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the HP620 specific parts of the kernel +# + +obj-y := mach.o setup.o + diff --git a/arch/sh/boards/hp6xx/hp620/mach.c b/arch/sh/boards/hp6xx/hp620/mach.c new file mode 100644 index 00000000000..0392d82b4a7 --- /dev/null +++ b/arch/sh/boards/hp6xx/hp620/mach.c @@ -0,0 +1,52 @@ +/* + * linux/arch/sh/boards/hp6xx/hp620/mach.c + * + * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Machine vector for the HP620 + */ + +#include <linux/init.h> + +#include <asm/machvec.h> +#include <asm/rtc.h> +#include <asm/machvec_init.h> + +#include <asm/io.h> +#include <asm/hd64461/hd64461.h> +#include <asm/irq.h> + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_hp620 __initmv = { + .mv_nr_irqs = HD64461_IRQBASE+HD64461_IRQ_NUM, + + .mv_inb = hd64461_inb, + .mv_inw = hd64461_inw, + .mv_inl = hd64461_inl, + .mv_outb = hd64461_outb, + .mv_outw = hd64461_outw, + .mv_outl = hd64461_outl, + + .mv_inb_p = hd64461_inb_p, + .mv_inw_p = hd64461_inw, + .mv_inl_p = hd64461_inl, + .mv_outb_p = hd64461_outb_p, + .mv_outw_p = hd64461_outw, + .mv_outl_p = hd64461_outl, + + .mv_insb = hd64461_insb, + .mv_insw = hd64461_insw, + .mv_insl = hd64461_insl, + .mv_outsb = hd64461_outsb, + .mv_outsw = hd64461_outsw, + .mv_outsl = hd64461_outsl, + + .mv_irq_demux = hd64461_irq_demux, +}; +ALIAS_MV(hp620) diff --git a/arch/sh/boards/hp6xx/hp620/setup.c b/arch/sh/boards/hp6xx/hp620/setup.c new file mode 100644 index 00000000000..045fc5da727 --- /dev/null +++ b/arch/sh/boards/hp6xx/hp620/setup.c @@ -0,0 +1,45 @@ +/* + * linux/arch/sh/boards/hp6xx/hp620/setup.c + * + * Copyright (C) 2002 Andriy Skulysh, 2005 Kristoffer Ericson + * + * May be copied or modified under the terms of the GNU General Public + * License. See Linux/COPYING for more information. + * + * Setup code for an HP620. + * Due to similiarity with hp680/hp690 same inits are done (for now) + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <asm/hd64461/hd64461.h> +#include <asm/io.h> +#include <asm/hp6xx/hp6xx.h> +#include <asm/cpu/dac.h> + +const char *get_system_type(void) +{ + return "HP620"; +} + +int __init platform_setup(void) +{ + u16 v; + + v = inw(HD64461_STBCR); + v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST | + HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST | + HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST | + HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST | + HD64461_STBCR_SAFECKE_IST; + outw(v, HD64461_STBCR); + + v = inw(HD64461_GPADR); + v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0; + outw(v, HD64461_GPADR); + + sh_dac_disable(DAC_SPEAKER_VOLUME); + + return 0; +} + diff --git a/arch/sh/boards/hp6xx/hp680/Makefile b/arch/sh/boards/hp6xx/hp680/Makefile new file mode 100644 index 00000000000..0beef11d9b1 --- /dev/null +++ b/arch/sh/boards/hp6xx/hp680/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the HP680 specific parts of the kernel +# + +obj-y := mach.o setup.o + diff --git a/arch/sh/boards/hp6xx/hp680/mach.c b/arch/sh/boards/hp6xx/hp680/mach.c new file mode 100644 index 00000000000..d7348613604 --- /dev/null +++ b/arch/sh/boards/hp6xx/hp680/mach.c @@ -0,0 +1,53 @@ +/* + * linux/arch/sh/boards/hp6xx/hp680/mach.c + * + * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Machine vector for the HP680 + */ + +#include <linux/init.h> + +#include <asm/machvec.h> +#include <asm/rtc.h> +#include <asm/machvec_init.h> + +#include <asm/io.h> +#include <asm/hd64461/hd64461.h> +#include <asm/hp6xx/io.h> +#include <asm/irq.h> + +struct sh_machine_vector mv_hp680 __initmv = { + .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM, + + .mv_inb = hd64461_inb, + .mv_inw = hd64461_inw, + .mv_inl = hd64461_inl, + .mv_outb = hd64461_outb, + .mv_outw = hd64461_outw, + .mv_outl = hd64461_outl, + + .mv_inb_p = hd64461_inb_p, + .mv_inw_p = hd64461_inw, + .mv_inl_p = hd64461_inl, + .mv_outb_p = hd64461_outb_p, + .mv_outw_p = hd64461_outw, + .mv_outl_p = hd64461_outl, + + .mv_insb = hd64461_insb, + .mv_insw = hd64461_insw, + .mv_insl = hd64461_insl, + .mv_outsb = hd64461_outsb, + .mv_outsw = hd64461_outsw, + .mv_outsl = hd64461_outsl, + + .mv_readw = hd64461_readw, + .mv_writew = hd64461_writew, + + .mv_irq_demux = hd64461_irq_demux, +}; + +ALIAS_MV(hp680) diff --git a/arch/sh/boards/hp6xx/hp680/setup.c b/arch/sh/boards/hp6xx/hp680/setup.c new file mode 100644 index 00000000000..4170190f264 --- /dev/null +++ b/arch/sh/boards/hp6xx/hp680/setup.c @@ -0,0 +1,41 @@ +/* + * linux/arch/sh/boards/hp6xx/hp680/setup.c + * + * Copyright (C) 2002 Andriy Skulysh + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Setup code for an HP680 (internal peripherials only) + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <asm/hd64461/hd64461.h> +#include <asm/io.h> +#include <asm/hp6xx/hp6xx.h> +#include <asm/cpu/dac.h> + +const char *get_system_type(void) +{ + return "HP680"; +} + +int __init platform_setup(void) +{ + u16 v; + v = inw(HD64461_STBCR); + v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST | + HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST | + HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST | + HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST | + HD64461_STBCR_SAFECKE_IST; + outw(v, HD64461_STBCR); + v = inw(HD64461_GPADR); + v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0; + outw(v, HD64461_GPADR); + + sh_dac_disable(DAC_SPEAKER_VOLUME); + + return 0; +} diff --git a/arch/sh/boards/hp6xx/hp690/Makefile b/arch/sh/boards/hp6xx/hp690/Makefile new file mode 100644 index 00000000000..fbbe95e75f8 --- /dev/null +++ b/arch/sh/boards/hp6xx/hp690/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the HP690 specific parts of the kernel +# + +obj-y := mach.o + diff --git a/arch/sh/boards/hp6xx/hp690/mach.c b/arch/sh/boards/hp6xx/hp690/mach.c new file mode 100644 index 00000000000..2a4c68783cd --- /dev/null +++ b/arch/sh/boards/hp6xx/hp690/mach.c @@ -0,0 +1,48 @@ +/* + * linux/arch/sh/boards/hp6xx/hp690/mach.c + * + * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Machine vector for the HP690 + */ + +#include <linux/init.h> + +#include <asm/machvec.h> +#include <asm/rtc.h> +#include <asm/machvec_init.h> + +#include <asm/io.h> +#include <asm/hd64461/hd64461.h> +#include <asm/irq.h> + +struct sh_machine_vector mv_hp690 __initmv = { + .mv_nr_irqs = HD64461_IRQBASE+HD64461_IRQ_NUM, + + .mv_inb = hd64461_inb, + .mv_inw = hd64461_inw, + .mv_inl = hd64461_inl, + .mv_outb = hd64461_outb, + .mv_outw = hd64461_outw, + .mv_outl = hd64461_outl, + + .mv_inb_p = hd64461_inb_p, + .mv_inw_p = hd64461_inw, + .mv_inl_p = hd64461_inl, + .mv_outb_p = hd64461_outb_p, + .mv_outw_p = hd64461_outw, + .mv_outl_p = hd64461_outl, + + .mv_insb = hd64461_insb, + .mv_insw = hd64461_insw, + .mv_insl = hd64461_insl, + .mv_outsb = hd64461_outsb, + .mv_outsw = hd64461_outsw, + .mv_outsl = hd64461_outsl, + + .mv_irq_demux = hd64461_irq_demux, +}; +ALIAS_MV(hp690) diff --git a/arch/sh/boards/mpc1211/Makefile b/arch/sh/boards/mpc1211/Makefile new file mode 100644 index 00000000000..1644ebed78c --- /dev/null +++ b/arch/sh/boards/mpc1211/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel +# + +obj-y := setup.o rtc.o led.o + +obj-$(CONFIG_PCI) += pci.o + diff --git a/arch/sh/boards/mpc1211/led.c b/arch/sh/boards/mpc1211/led.c new file mode 100644 index 00000000000..0a31beec346 --- /dev/null +++ b/arch/sh/boards/mpc1211/led.c @@ -0,0 +1,64 @@ +/* + * linux/arch/sh/kernel/led_mpc1211.c + * + * Copyright (C) 2001 Saito.K & Jeanne + * + * This file contains Interface MPC-1211 specific LED code. + */ + +#include <linux/config.h> + +static void mach_led(int position, int value) +{ + volatile unsigned char* p = (volatile unsigned char*)0xa2000000; + + if (value) { + *p |= 1; + } else { + *p &= ~1; + } +} + +#ifdef CONFIG_HEARTBEAT + +#include <linux/sched.h> + +/* Cycle the LED's in the clasic Knightrider/Sun pattern */ +void heartbeat_mpc1211(void) +{ + static unsigned int cnt = 0, period = 0; + volatile unsigned char* p = (volatile unsigned char*)0xa2000000; + static unsigned bit = 0, up = 1; + + cnt += 1; + if (cnt < period) { + return; + } + + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 + */ + period = 110 - ( (300<<FSHIFT)/ + ((avenrun[0]/5) + (3<<FSHIFT)) ); + + if (up) { + if (bit == 7) { + bit--; + up=0; + } else { + bit ++; + } + } else { + if (bit == 0) { + bit++; + up=1; + } else { + bit--; + } + } + *p = 1<<bit; + +} +#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/mpc1211/pci.c b/arch/sh/boards/mpc1211/pci.c new file mode 100644 index 00000000000..ba3a6543975 --- /dev/null +++ b/arch/sh/boards/mpc1211/pci.c @@ -0,0 +1,296 @@ +/* + * Low-Level PCI Support for the MPC-1211(CTP/PCI/MPC-SH02) + * + * (c) 2002-2003 Saito.K & Jeanne + * + * Dustin McIntire (dustin@sensoria.com) + * Derived from arch/i386/kernel/pci-*.c which bore the message: + * (c) 1999--2000 Martin Mares <mj@ucw.cz> + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + */ +#include <linux/config.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/errno.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +#include <asm/machvec.h> +#include <asm/io.h> +#include <asm/mpc1211/pci.h> + +static struct resource mpcpci_io_resource = { + "MPCPCI IO", + 0x00000000, + 0xffffffff, + IORESOURCE_IO +}; + +static struct resource mpcpci_mem_resource = { + "MPCPCI mem", + 0x00000000, + 0xffffffff, + IORESOURCE_MEM +}; + +static struct pci_ops pci_direct_conf1; +struct pci_channel board_pci_channels[] = { + {&pci_direct_conf1, &mpcpci_io_resource, &mpcpci_mem_resource, 0, 256}, + {NULL, NULL, NULL, 0, 0}, +}; + +/* + * Direct access to PCI hardware... + */ + + +#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) + +/* + * Functions for accessing PCI configuration space with type 1 accesses + */ +static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) +{ + u32 word; + unsigned long flags; + + /* + * PCIPDR may only be accessed as 32 bit words, + * so we must do byte alignment by hand + */ + local_irq_save(flags); + writel(CONFIG_CMD(bus,devfn,where), PCIPAR); + word = readl(PCIPDR); + local_irq_restore(flags); + + switch (size) { + case 1: + switch (where & 0x3) { + case 3: + *value = (u8)(word >> 24); + break; + case 2: + *value = (u8)(word >> 16); + break; + case 1: + *value = (u8)(word >> 8); + break; + default: + *value = (u8)word; + break; + } + break; + case 2: + switch (where & 0x3) { + case 3: + *value = (u16)(word >> 24); + local_irq_save(flags); + writel(CONFIG_CMD(bus,devfn,(where+1)), PCIPAR); + word = readl(PCIPDR); + local_irq_restore(flags); + *value |= ((word & 0xff) << 8); + break; + case 2: + *value = (u16)(word >> 16); + break; + case 1: + *value = (u16)(word >> 8); + break; + default: + *value = (u16)word; + break; + } + break; + case 4: + *value = word; + break; + } + PCIDBG(4,"pci_conf1_read@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value); + return PCIBIOS_SUCCESSFUL; +} + +/* + * Since MPC-1211 only does 32bit access we'll have to do a read,mask,write operation. + * We'll allow an odd byte offset, though it should be illegal. + */ +static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) +{ + u32 word,mask = 0; + unsigned long flags; + u32 shift = (where & 3) * 8; + + if(size == 1) { + mask = ((1 << 8) - 1) << shift; // create the byte mask + } else if(size == 2){ + if(shift == 24) + return PCIBIOS_BAD_REGISTER_NUMBER; + mask = ((1 << 16) - 1) << shift; // create the word mask + } + local_irq_save(flags); + writel(CONFIG_CMD(bus,devfn,where), PCIPAR); + if(size == 4){ + writel(value, PCIPDR); + local_irq_restore(flags); + PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value); + return PCIBIOS_SUCCESSFUL; + } + word = readl(PCIPDR); + word &= ~mask; + word |= ((value << shift) & mask); + writel(word, PCIPDR); + local_irq_restore(flags); + PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word); + return PCIBIOS_SUCCESSFUL; +} + +#undef CONFIG_CMD + +static struct pci_ops pci_direct_conf1 = { + .read = pci_conf1_read, + .write = pci_conf1_write, +}; + +static void __devinit quirk_ali_ide_ports(struct pci_dev *dev) +{ + dev->resource[0].start = 0x1f0; + dev->resource[0].end = 0x1f7; + dev->resource[0].flags = IORESOURCE_IO; + dev->resource[1].start = 0x3f6; + dev->resource[1].end = 0x3f6; + dev->resource[1].flags = IORESOURCE_IO; + dev->resource[2].start = 0x170; + dev->resource[2].end = 0x177; + dev->resource[2].flags = IORESOURCE_IO; + dev->resource[3].start = 0x376; + dev->resource[3].end = 0x376; + dev->resource[3].flags = IORESOURCE_IO; + dev->resource[4].start = 0xf000; + dev->resource[4].end = 0xf00f; + dev->resource[4].flags = IORESOURCE_IO; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, quirk_ali_ide_ports); + +char * __devinit pcibios_setup(char *str) +{ + return str; +} + +/* + * Called after each bus is probed, but before its children + * are examined. + */ + +void __init pcibios_fixup_bus(struct pci_bus *b) +{ + pci_read_bridge_bases(b); +} + +/* + * IRQ functions + */ +static inline u8 bridge_swizzle(u8 pin, u8 slot) +{ + return (((pin-1) + slot) % 4) + 1; +} + +static inline u8 bridge_swizzle_pci_1(u8 pin, u8 slot) +{ + return (((pin-1) - slot) & 3) + 1; +} + +static u8 __init mpc1211_swizzle(struct pci_dev *dev, u8 *pinp) +{ + unsigned long flags; + u8 pin = *pinp; + u32 word; + + for ( ; dev->bus->self; dev = dev->bus->self) { + if (!pin) + continue; + + if (dev->bus->number == 1) { + local_irq_save(flags); + writel(0x80000000 | 0x2c, PCIPAR); + word = readl(PCIPDR); + local_irq_restore(flags); + word >>= 16; + + if (word == 0x0001) + pin = bridge_swizzle_pci_1(pin, PCI_SLOT(dev->devfn)); + else + pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); + } else + pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); + } + + *pinp = pin; + + return PCI_SLOT(dev->devfn); +} + +static int __init map_mpc1211_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq = -1; + + /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */ + if (dev->bus->number == 0) { + switch (slot) { + case 13: irq = 9; break; /* USB */ + case 22: irq = 10; break; /* LAN */ + default: irq = 0; break; + } + } else { + switch (pin) { + case 0: irq = 0; break; + case 1: irq = 7; break; + case 2: irq = 9; break; + case 3: irq = 10; break; + case 4: irq = 11; break; + } + } + + if( irq < 0 ) { + PCIDBG(3, "PCI: Error mapping IRQ on device %s\n", pci_name(dev)); + return irq; + } + + PCIDBG(2, "Setting IRQ for slot %s to %d\n", pci_name(dev), irq); + + return irq; +} + +void __init pcibios_fixup_irqs(void) +{ + pci_fixup_irqs(mpc1211_swizzle, map_mpc1211_irq); +} + +void pcibios_align_resource(void *data, struct resource *res, + unsigned long size, unsigned long align) +{ + unsigned long start = res->start; + + if (res->flags & IORESOURCE_IO) { + if (start >= 0x10000UL) { + if ((start & 0xffffUL) < 0x4000UL) { + start = (start & 0xffff0000UL) + 0x4000UL; + } else if ((start & 0xffffUL) >= 0xf000UL) { + start = (start & 0xffff0000UL) + 0x10000UL; + } + res->start = start; + } else { + if (start & 0x300) { + start = (start + 0x3ff) & ~0x3ff; + res->start = start; + } + } + } +} + diff --git a/arch/sh/boards/mpc1211/rtc.c b/arch/sh/boards/mpc1211/rtc.c new file mode 100644 index 00000000000..4d100f04807 --- /dev/null +++ b/arch/sh/boards/mpc1211/rtc.c @@ -0,0 +1,152 @@ +/* + * linux/arch/sh/kernel/rtc-mpc1211.c -- MPC-1211 on-chip RTC support + * + * Copyright (C) 2002 Saito.K & Jeanne + * + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/time.h> +#include <linux/mc146818rtc.h> + +#ifndef BCD_TO_BIN +#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10) +#endif + +#ifndef BIN_TO_BCD +#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10) +#endif + +/* arc/i386/kernel/time.c */ +unsigned long get_cmos_time(void) +{ + unsigned int year, mon, day, hour, min, sec; + int i; + + spin_lock(&rtc_lock); + /* The Linux interpretation of the CMOS clock register contents: + * When the Update-In-Progress (UIP) flag goes from 1 to 0, the + * RTC registers show the second which has precisely just started. + * Let's hope other operating systems interpret the RTC the same way. + */ + /* read RTC exactly on falling edge of update flag */ + for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */ + if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) + break; + for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */ + if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)) + break; + do { /* Isn't this overkill ? UIP above should guarantee consistency */ + sec = CMOS_READ(RTC_SECONDS); + min = CMOS_READ(RTC_MINUTES); + hour = CMOS_READ(RTC_HOURS); + day = CMOS_READ(RTC_DAY_OF_MONTH); + mon = CMOS_READ(RTC_MONTH); + year = CMOS_READ(RTC_YEAR); + } while (sec != CMOS_READ(RTC_SECONDS)); + if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) + { + BCD_TO_BIN(sec); + BCD_TO_BIN(min); + BCD_TO_BIN(hour); + BCD_TO_BIN(day); + BCD_TO_BIN(mon); + BCD_TO_BIN(year); + } + spin_unlock(&rtc_lock); + if ((year += 1900) < 1970) + year += 100; + return mktime(year, mon, day, hour, min, sec); +} + +void mpc1211_rtc_gettimeofday(struct timeval *tv) +{ + + tv->tv_sec = get_cmos_time(); + tv->tv_usec = 0; +} + +/* arc/i386/kernel/time.c */ +/* + * In order to set the CMOS clock precisely, set_rtc_mmss has to be + * called 500 ms after the second nowtime has started, because when + * nowtime is written into the registers of the CMOS clock, it will + * jump to the next second precisely 500 ms later. Check the Motorola + * MC146818A or Dallas DS12887 data sheet for details. + * + * BUG: This routine does not handle hour overflow properly; it just + * sets the minutes. Usually you'll only notice that after reboot! + */ +static int set_rtc_mmss(unsigned long nowtime) +{ + int retval = 0; + int real_seconds, real_minutes, cmos_minutes; + unsigned char save_control, save_freq_select; + + /* gets recalled with irq locally disabled */ + spin_lock(&rtc_lock); + save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ + CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); + + save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */ + CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + + cmos_minutes = CMOS_READ(RTC_MINUTES); + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) + BCD_TO_BIN(cmos_minutes); + + /* + * since we're only adjusting minutes and seconds, + * don't interfere with hour overflow. This avoids + * messing with unknown time zones but requires your + * RTC not to be off by more than 15 minutes + */ + real_seconds = nowtime % 60; + real_minutes = nowtime / 60; + if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) + real_minutes += 30; /* correct for half hour time zone */ + real_minutes %= 60; + + if (abs(real_minutes - cmos_minutes) < 30) { + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + BIN_TO_BCD(real_seconds); + BIN_TO_BCD(real_minutes); + } + CMOS_WRITE(real_seconds,RTC_SECONDS); + CMOS_WRITE(real_minutes,RTC_MINUTES); + } else { + printk(KERN_WARNING + "set_rtc_mmss: can't update from %d to %d\n", + cmos_minutes, real_minutes); + retval = -1; + } + + /* The following flags have to be released exactly in this order, + * otherwise the DS12887 (popular MC146818A clone with integrated + * battery and quartz) will not reset the oscillator and will not + * update precisely 500 ms later. You won't find this mentioned in + * the Dallas Semiconductor data sheets, but who believes data + * sheets anyway ... -- Markus Kuhn + */ + CMOS_WRITE(save_control, RTC_CONTROL); + CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + spin_unlock(&rtc_lock); + + return retval; +} + +int mpc1211_rtc_settimeofday(const struct timeval *tv) +{ + unsigned long nowtime = tv->tv_sec; + + return set_rtc_mmss(nowtime); +} + +void mpc1211_time_init(void) +{ + rtc_get_time = mpc1211_rtc_gettimeofday; + rtc_set_time = mpc1211_rtc_settimeofday; +} + diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c new file mode 100644 index 00000000000..2bb581b9168 --- /dev/null +++ b/arch/sh/boards/mpc1211/setup.c @@ -0,0 +1,360 @@ +/* + * linux/arch/sh/board/mpc1211/setup.c + * + * Copyright (C) 2002 Saito.K & Jeanne, Fujii.Y + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/interrupt.h> + +#include <asm/io.h> +#include <asm/machvec.h> +#include <asm/mpc1211/mpc1211.h> +#include <asm/mpc1211/pci.h> +#include <asm/mpc1211/m1543c.h> + + +/* ALI15X3 SMBus address offsets */ +#define SMBHSTSTS (0 + 0x3100) +#define SMBHSTCNT (1 + 0x3100) +#define SMBHSTSTART (2 + 0x3100) +#define SMBHSTCMD (7 + 0x3100) +#define SMBHSTADD (3 + 0x3100) +#define SMBHSTDAT0 (4 + 0x3100) +#define SMBHSTDAT1 (5 + 0x3100) +#define SMBBLKDAT (6 + 0x3100) + +/* Other settings */ +#define MAX_TIMEOUT 500 /* times 1/100 sec */ + +/* ALI15X3 command constants */ +#define ALI15X3_ABORT 0x04 +#define ALI15X3_T_OUT 0x08 +#define ALI15X3_QUICK 0x00 +#define ALI15X3_BYTE 0x10 +#define ALI15X3_BYTE_DATA 0x20 +#define ALI15X3_WORD_DATA 0x30 +#define ALI15X3_BLOCK_DATA 0x40 +#define ALI15X3_BLOCK_CLR 0x80 + +/* ALI15X3 status register bits */ +#define ALI15X3_STS_IDLE 0x04 +#define ALI15X3_STS_BUSY 0x08 +#define ALI15X3_STS_DONE 0x10 +#define ALI15X3_STS_DEV 0x20 /* device error */ +#define ALI15X3_STS_COLL 0x40 /* collision or no response */ +#define ALI15X3_STS_TERM 0x80 /* terminated by abort */ +#define ALI15X3_STS_ERR 0xE0 /* all the bad error bits */ + +const char *get_system_type(void) +{ + return "Interface MPC-1211(CTP/PCI/MPC-SH02)"; +} + +static void __init pci_write_config(unsigned long busNo, + unsigned long devNo, + unsigned long fncNo, + unsigned long cnfAdd, + unsigned long cnfData) +{ + ctrl_outl((0x80000000 + + ((busNo & 0xff) << 16) + + ((devNo & 0x1f) << 11) + + ((fncNo & 0x07) << 8) + + (cnfAdd & 0xfc)), PCIPAR); + + ctrl_outl(cnfData, PCIPDR); +} + +/* + Initialize IRQ setting +*/ + +static unsigned char m_irq_mask = 0xfb; +static unsigned char s_irq_mask = 0xff; +volatile unsigned long irq_err_count; + +static void disable_mpc1211_irq(unsigned int irq) +{ + unsigned long flags; + + save_and_cli(flags); + if( irq < 8) { + m_irq_mask |= (1 << irq); + outb(m_irq_mask,I8259_M_MR); + } else { + s_irq_mask |= (1 << (irq - 8)); + outb(s_irq_mask,I8259_S_MR); + } + restore_flags(flags); + +} + +static void enable_mpc1211_irq(unsigned int irq) +{ + unsigned long flags; + + save_and_cli(flags); + + if( irq < 8) { + m_irq_mask &= ~(1 << irq); + outb(m_irq_mask,I8259_M_MR); + } else { + s_irq_mask &= ~(1 << (irq - 8)); + outb(s_irq_mask,I8259_S_MR); + } + restore_flags(flags); +} + +static inline int mpc1211_irq_real(unsigned int irq) +{ + int value; + int irqmask; + + if ( irq < 8) { + irqmask = 1<<irq; + outb(0x0b,I8259_M_CR); /* ISR register */ + value = inb(I8259_M_CR) & irqmask; + outb(0x0a,I8259_M_CR); /* back ro the IPR reg */ + return value; + } + irqmask = 1<<(irq - 8); + outb(0x0b,I8259_S_CR); /* ISR register */ + value = inb(I8259_S_CR) & irqmask; + outb(0x0a,I8259_S_CR); /* back ro the IPR reg */ + return value; +} + +static void mask_and_ack_mpc1211(unsigned int irq) +{ + unsigned long flags; + + save_and_cli(flags); + + if(irq < 8) { + if(m_irq_mask & (1<<irq)){ + if(!mpc1211_irq_real(irq)){ + irq_err_count++; + printk("spurious 8259A interrupt: IRQ %x\n",irq); + } + } else { + m_irq_mask |= (1<<irq); + } + inb(I8259_M_MR); /* DUMMY */ + outb(m_irq_mask,I8259_M_MR); /* disable */ + outb(0x60+irq,I8259_M_CR); /* EOI */ + + } else { + if(s_irq_mask & (1<<(irq - 8))){ + if(!mpc1211_irq_real(irq)){ + irq_err_count++; + printk("spurious 8259A interrupt: IRQ %x\n",irq); + } + } else { + s_irq_mask |= (1<<(irq - 8)); + } + inb(I8259_S_MR); /* DUMMY */ + outb(s_irq_mask,I8259_S_MR); /* disable */ + outb(0x60+(irq-8),I8259_S_CR); /* EOI */ + outb(0x60+2,I8259_M_CR); + } + restore_flags(flags); +} + +static void end_mpc1211_irq(unsigned int irq) +{ + enable_mpc1211_irq(irq); +} + +static unsigned int startup_mpc1211_irq(unsigned int irq) +{ + enable_mpc1211_irq(irq); + return 0; +} + +static void shutdown_mpc1211_irq(unsigned int irq) +{ + disable_mpc1211_irq(irq); +} + +static struct hw_interrupt_type mpc1211_irq_type = { + .typename = "MPC1211-IRQ", + .startup = startup_mpc1211_irq, + .shutdown = shutdown_mpc1211_irq, + .enable = enable_mpc1211_irq, + .disable = disable_mpc1211_irq, + .ack = mask_and_ack_mpc1211, + .end = end_mpc1211_irq +}; + +static void make_mpc1211_irq(unsigned int irq) +{ + irq_desc[irq].handler = &mpc1211_irq_type; + irq_desc[irq].status = IRQ_DISABLED; + irq_desc[irq].action = 0; + irq_desc[irq].depth = 1; + disable_mpc1211_irq(irq); +} + +int mpc1211_irq_demux(int irq) +{ + unsigned int poll; + + if( irq == 2 ) { + outb(0x0c,I8259_M_CR); + poll = inb(I8259_M_CR); + if(poll & 0x80) { + irq = (poll & 0x07); + } + if( irq == 2) { + outb(0x0c,I8259_S_CR); + poll = inb(I8259_S_CR); + irq = (poll & 0x07) + 8; + } + } + return irq; +} + +void __init init_mpc1211_IRQ(void) +{ + int i; + /* + * Super I/O (Just mimic PC): + * 1: keyboard + * 3: serial 1 + * 4: serial 0 + * 5: printer + * 6: floppy + * 8: rtc + * 10: lan + * 12: mouse + * 14: ide0 + * 15: ide1 + */ + + pci_write_config(0,0,0,0x54, 0xb0b0002d); + outb(0x11, I8259_M_CR); /* mater icw1 edge trigger */ + outb(0x11, I8259_S_CR); /* slave icw1 edge trigger */ + outb(0x20, I8259_M_MR); /* m icw2 base vec 0x08 */ + outb(0x28, I8259_S_MR); /* s icw2 base vec 0x70 */ + outb(0x04, I8259_M_MR); /* m icw3 slave irq2 */ + outb(0x02, I8259_S_MR); /* s icw3 slave id */ + outb(0x01, I8259_M_MR); /* m icw4 non buf normal eoi*/ + outb(0x01, I8259_S_MR); /* s icw4 non buf normal eo1*/ + outb(0xfb, I8259_M_MR); /* disable irq0--irq7 */ + outb(0xff, I8259_S_MR); /* disable irq8--irq15 */ + + for ( i=0; i < 16; i++) { + if(i != 2) { + make_mpc1211_irq(i); + } + } +} + +/* + Initialize the board +*/ + + +static void delay (void) +{ + volatile unsigned short tmp; + tmp = *(volatile unsigned short *) 0xa0000000; +} + +static void delay1000 (void) +{ + int i; + + for (i=0; i<1000; i++) + delay (); +} + +static int put_smb_blk(unsigned char *p, int address, int command, int no) +{ + int temp; + int timeout; + int i; + + outb(0xff, SMBHSTSTS); + temp = inb(SMBHSTSTS); + for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE); timeout++) { + delay1000(); + temp = inb(SMBHSTSTS); + } + if (timeout >= MAX_TIMEOUT){ + return -1; + } + + outb(((address & 0x7f) << 1), SMBHSTADD); + outb(0xc0, SMBHSTCNT); + outb(command & 0xff, SMBHSTCMD); + outb(no & 0x1f, SMBHSTDAT0); + + for(i = 1; i <= no; i++) { + outb(*p++, SMBBLKDAT); + } + outb(0xff, SMBHSTSTART); + + temp = inb(SMBHSTSTS); + for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE)); timeout++) { + delay1000(); + temp = inb(SMBHSTSTS); + } + if (timeout >= MAX_TIMEOUT) { + return -2; + } + if ( temp & ALI15X3_STS_ERR ){ + return -3; + } + return 0; +} + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_mpc1211 __initmv = { + .mv_nr_irqs = 48, + .mv_irq_demux = mpc1211_irq_demux, + .mv_init_irq = init_mpc1211_IRQ, + +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_mpc1211, +#endif +}; + +ALIAS_MV(mpc1211) + +/* arch/sh/boards/mpc1211/rtc.c */ +void mpc1211_time_init(void); + +int __init platform_setup(void) +{ + unsigned char spd_buf[128]; + + __set_io_port_base(PA_PCI_IO); + + pci_write_config(0,0,0,0x54, 0xb0b00000); + + do { + outb(ALI15X3_ABORT, SMBHSTCNT); + spd_buf[0] = 0x0c; + spd_buf[1] = 0x43; + spd_buf[2] = 0x7f; + spd_buf[3] = 0x03; + spd_buf[4] = 0x00; + spd_buf[5] = 0x03; + spd_buf[6] = 0x00; + } while (put_smb_blk(spd_buf, 0x69, 0, 7) < 0); + + board_time_init = mpc1211_time_init; + + return 0; +} + diff --git a/arch/sh/boards/overdrive/Makefile b/arch/sh/boards/overdrive/Makefile new file mode 100644 index 00000000000..1762b59e927 --- /dev/null +++ b/arch/sh/boards/overdrive/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the STMicroelectronics Overdrive specific parts of the kernel +# + +obj-y := mach.o setup.o io.o irq.o led.o time.o + +obj-$(CONFIG_PCI) += fpga.o galileo.o pcidma.o + diff --git a/arch/sh/boards/overdrive/fpga.c b/arch/sh/boards/overdrive/fpga.c new file mode 100644 index 00000000000..3a1ec940344 --- /dev/null +++ b/arch/sh/boards/overdrive/fpga.c @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file handles programming up the Altera Flex10K that interfaces to + * the Galileo, and does the PS/2 keyboard and mouse + * + */ + + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/delay.h> + + +#include <asm/overdriver/gt64111.h> +#include <asm/overdrive/overdrive.h> +#include <asm/overdrive/fpga.h> + +#define FPGA_NotConfigHigh() (*FPGA_ControlReg) = (*FPGA_ControlReg) | ENABLE_FPGA_BIT +#define FPGA_NotConfigLow() (*FPGA_ControlReg) = (*FPGA_ControlReg) & RESET_FPGA_MASK + +/* I need to find out what (if any) the real delay factor here is */ +/* The delay is definately not critical */ +#define long_delay() {int i;for(i=0;i<10000;i++);} +#define short_delay() {int i;for(i=0;i<100;i++);} + +static void __init program_overdrive_fpga(const unsigned char *fpgacode, + int size) +{ + int timeout = 0; + int i, j; + unsigned char b; + static volatile unsigned char *FPGA_ControlReg = + (volatile unsigned char *) (OVERDRIVE_CTRL); + static volatile unsigned char *FPGA_ProgramReg = + (volatile unsigned char *) (FPGA_DCLK_ADDRESS); + + printk("FPGA: Commencing FPGA Programming\n"); + + /* The PCI reset but MUST be low when programming the FPGA !!! */ + b = (*FPGA_ControlReg) & RESET_PCI_MASK; + + (*FPGA_ControlReg) = b; + + /* Prepare FPGA to program */ + + FPGA_NotConfigHigh(); + long_delay(); + + FPGA_NotConfigLow(); + short_delay(); + + while ((*FPGA_ProgramReg & FPGA_NOT_STATUS) != 0) { + printk("FPGA: Waiting for NotStatus to go Low ... \n"); + } + + FPGA_NotConfigHigh(); + + /* Wait for FPGA "ready to be programmed" signal */ + printk("FPGA: Waiting for NotStatus to go high (FPGA ready)... \n"); + + for (timeout = 0; + (((*FPGA_ProgramReg & FPGA_NOT_STATUS) == 0) + && (timeout < FPGA_TIMEOUT)); timeout++); + + /* Check if timeout condition occured - i.e. an error */ + + if (timeout == FPGA_TIMEOUT) { + printk + ("FPGA: Failed to program - Timeout waiting for notSTATUS to go high\n"); + return; + } + + printk("FPGA: Copying data to FPGA ... %d bytes\n", size); + + /* Copy array to FPGA - bit at a time */ + + for (i = 0; i < size; i++) { + volatile unsigned w = 0; + + for (j = 0; j < 8; j++) { + *FPGA_ProgramReg = (fpgacode[i] >> j) & 0x01; + short_delay(); + } + if ((i & 0x3ff) == 0) { + printk("."); + } + } + + /* Waiting for CONFDONE to go high - means the program is complete */ + + for (timeout = 0; + (((*FPGA_ProgramReg & FPGA_CONFDONE) == 0) + && (timeout < FPGA_TIMEOUT)); timeout++) { + + *FPGA_ProgramReg = 0x0; + long_delay(); + } + + if (timeout == FPGA_TIMEOUT) { + printk + ("FPGA: Failed to program - Timeout waiting for CONFDONE to go high\n"); + return; + } else { /* Clock another 10 times - gets the device into a working state */ + for (i = 0; i < 10; i++) { + *FPGA_ProgramReg = 0x0; + short_delay(); + } + } + + printk("FPGA: Programming complete\n"); +} + + +static const unsigned char __init fpgacode[] = { +#include "./overdrive.ttf" /* Code from maxplus2 compiler */ + , 0, 0 +}; + + +int __init init_overdrive_fpga(void) +{ + program_overdrive_fpga(fpgacode, sizeof(fpgacode)); + + return 0; +} diff --git a/arch/sh/boards/overdrive/galileo.c b/arch/sh/boards/overdrive/galileo.c new file mode 100644 index 00000000000..276fa11ee4c --- /dev/null +++ b/arch/sh/boards/overdrive/galileo.c @@ -0,0 +1,588 @@ +/* + * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains the PCI routines required for the Galileo GT6411 + * PCI bridge as used on the Orion and Overdrive boards. + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/types.h> +#include <linux/ioport.h> + +#include <asm/overdrive/overdrive.h> +#include <asm/overdrive/gt64111.h> + + +/* After boot, we shift the Galileo registers so that they appear + * in BANK6, along with IO space. This means we can have one contingous + * lump of PCI address space without these registers appearing in the + * middle of them + */ + +#define GT64111_BASE_ADDRESS 0xbb000000 +#define GT64111_IO_BASE_ADDRESS 0x1000 +/* The GT64111 registers appear at this address to the SH4 after reset */ +#define RESET_GT64111_BASE_ADDRESS 0xb4000000 + +/* Macros used to access the Galileo registers */ +#define RESET_GT64111_REG(x) (RESET_GT64111_BASE_ADDRESS+x) +#define GT64111_REG(x) (GT64111_BASE_ADDRESS+x) + +#define RESET_GT_WRITE(x,v) writel((v),RESET_GT64111_REG(x)) + +#define RESET_GT_READ(x) readl(RESET_GT64111_REG(x)) + +#define GT_WRITE(x,v) writel((v),GT64111_REG(x)) +#define GT_WRITE_BYTE(x,v) writeb((v),GT64111_REG(x)) +#define GT_WRITE_SHORT(x,v) writew((v),GT64111_REG(x)) + +#define GT_READ(x) readl(GT64111_REG(x)) +#define GT_READ_BYTE(x) readb(GT64111_REG(x)) +#define GT_READ_SHORT(x) readw(GT64111_REG(x)) + + +/* Where the various SH banks start at */ +#define SH_BANK4_ADR 0xb0000000 +#define SH_BANK5_ADR 0xb4000000 +#define SH_BANK6_ADR 0xb8000000 + +/* Masks out everything but lines 28,27,26 */ +#define BANK_SELECT_MASK 0x1c000000 + +#define SH4_TO_BANK(x) ( (x) & BANK_SELECT_MASK) + +/* + * Masks used for address conversaion. Bank 6 is used for IO and + * has all the address bits zeroed by the FPGA. Special case this + */ +#define MEMORY_BANK_MASK 0x1fffffff +#define IO_BANK_MASK 0x03ffffff + +/* Mark bank 6 as the bank used for IO. You can change this in the FPGA code + * if you want + */ +#define IO_BANK_ADR PCI_GTIO_BASE + +/* Will select the correct mask to apply depending on the SH$ address */ +#define SELECT_BANK_MASK(x) \ + ( (SH4_TO_BANK(x)==SH4_TO_BANK(IO_BANK_ADR)) ? IO_BANK_MASK : MEMORY_BANK_MASK) + +/* Converts between PCI space and P2 region */ +#define SH4_TO_PCI(x) ((x)&SELECT_BANK_MASK(x)) + +/* Various macros for figuring out what to stick in the Galileo registers. + * You *really* don't want to figure this stuff out by hand, you always get + * it wrong + */ +#define GT_MEM_LO_ADR(x) ((((unsigned)((x)&SELECT_BANK_MASK(x)))>>21)&0x7ff) +#define GT_MEM_HI_ADR(x) ((((unsigned)((x)&SELECT_BANK_MASK(x)))>>21)&0x7f) +#define GT_MEM_SUB_ADR(x) ((((unsigned)((x)&SELECT_BANK_MASK(x)))>>20)&0xff) + +#define PROGRAM_HI_LO(block,a,s) \ + GT_WRITE(block##_LO_DEC_ADR,GT_MEM_LO_ADR(a));\ + GT_WRITE(block##_HI_DEC_ADR,GT_MEM_HI_ADR(a+s-1)) + +#define PROGRAM_SUB_HI_LO(block,a,s) \ + GT_WRITE(block##_LO_DEC_ADR,GT_MEM_SUB_ADR(a));\ + GT_WRITE(block##_HI_DEC_ADR,GT_MEM_SUB_ADR(a+s-1)) + +/* We need to set the size, and the offset register */ + +#define GT_BAR_MASK(x) ((x)&~0xfff) + +/* Macro to set up the BAR in the Galileo. Essentially used for the DRAM */ +#define PROGRAM_GT_BAR(block,a,s) \ + GT_WRITE(PCI_##block##_BANK_SIZE,GT_BAR_MASK((s-1)));\ + write_config_to_galileo(PCI_CONFIG_##block##_BASE_ADR,\ + GT_BAR_MASK(a)) + +#define DISABLE_GT_BAR(block) \ + GT_WRITE(PCI_##block##_BANK_SIZE,0),\ + GT_CONFIG_WRITE(PCI_CONFIG_##block##_BASE_ADR,\ + 0x80000000) + +/* Macros to disable things we are not going to use */ +#define DISABLE_DECODE(x) GT_WRITE(x##_LO_DEC_ADR,0x7ff);\ + GT_WRITE(x##_HI_DEC_ADR,0x00) + +#define DISABLE_SUB_DECODE(x) GT_WRITE(x##_LO_DEC_ADR,0xff);\ + GT_WRITE(x##_HI_DEC_ADR,0x00) + +static void __init reset_pci(void) +{ + /* Set RESET_PCI bit high */ + writeb(readb(OVERDRIVE_CTRL) | ENABLE_PCI_BIT, OVERDRIVE_CTRL); + udelay(250); + + /* Set RESET_PCI bit low */ + writeb(readb(OVERDRIVE_CTRL) & RESET_PCI_MASK, OVERDRIVE_CTRL); + udelay(250); + + writeb(readb(OVERDRIVE_CTRL) | ENABLE_PCI_BIT, OVERDRIVE_CTRL); + udelay(250); +} + +static int write_config_to_galileo(int where, u32 val); +#define GT_CONFIG_WRITE(where,val) write_config_to_galileo(where,val) + +#define ENABLE_PCI_DRAM + + +#ifdef TEST_DRAM +/* Test function to check out if the PCI DRAM is working OK */ +static int /* __init */ test_dram(unsigned *base, unsigned size) +{ + unsigned *p = base; + unsigned *end = (unsigned *) (((unsigned) base) + size); + unsigned w; + + for (p = base; p < end; p++) { + *p = 0xffffffff; + if (*p != 0xffffffff) { + printk("AAARGH -write failed!!! at %p is %x\n", p, + *p); + return 0; + } + *p = 0x0; + if (*p != 0x0) { + printk("AAARGH -write failed!!!\n"); + return 0; + } + } + + for (p = base; p < end; p++) { + *p = (unsigned) p; + if (*p != (unsigned) p) { + printk("Failed at 0x%p, actually is 0x%x\n", p, + *p); + return 0; + } + } + + for (p = base; p < end; p++) { + w = ((unsigned) p & 0xffff0000); + *p = w | (w >> 16); + } + + for (p = base; p < end; p++) { + w = ((unsigned) p & 0xffff0000); + w |= (w >> 16); + if (*p != w) { + printk + ("Failed at 0x%p, should be 0x%x actually is 0x%x\n", + p, w, *p); + return 0; + } + } + + return 1; +} +#endif + + +/* Function to set up and initialise the galileo. This sets up the BARS, + * maps the DRAM into the address space etc,etc + */ +int __init galileo_init(void) +{ + reset_pci(); + + /* Now shift the galileo regs into this block */ + RESET_GT_WRITE(INTERNAL_SPACE_DEC, + GT_MEM_LO_ADR(GT64111_BASE_ADDRESS)); + + /* Should have a sanity check here, that you can read back at the new + * address what you just wrote + */ + + /* Disable decode for all regions */ + DISABLE_DECODE(RAS10); + DISABLE_DECODE(RAS32); + DISABLE_DECODE(CS20); + DISABLE_DECODE(CS3); + DISABLE_DECODE(PCI_IO); + DISABLE_DECODE(PCI_MEM0); + DISABLE_DECODE(PCI_MEM1); + + /* Disable all BARS */ + GT_WRITE(BAR_ENABLE_ADR, 0x1ff); + DISABLE_GT_BAR(RAS10); + DISABLE_GT_BAR(RAS32); + DISABLE_GT_BAR(CS20); + DISABLE_GT_BAR(CS3); + + /* Tell the BAR where the IO registers now are */ + GT_CONFIG_WRITE(PCI_CONFIG_INT_REG_IO_ADR,GT_BAR_MASK( + (GT64111_IO_BASE_ADDRESS & + IO_BANK_MASK))); + /* set up a 112 Mb decode */ + PROGRAM_HI_LO(PCI_MEM0, SH_BANK4_ADR, 112 * 1024 * 1024); + + /* Set up a 32 MB io space decode */ + PROGRAM_HI_LO(PCI_IO, IO_BANK_ADR, 32 * 1024 * 1024); + +#ifdef ENABLE_PCI_DRAM + /* Program up the DRAM configuration - there is DRAM only in bank 0 */ + /* Now set up the DRAM decode */ + PROGRAM_HI_LO(RAS10, PCI_DRAM_BASE, PCI_DRAM_SIZE); + /* And the sub decode */ + PROGRAM_SUB_HI_LO(RAS0, PCI_DRAM_BASE, PCI_DRAM_SIZE); + + DISABLE_SUB_DECODE(RAS1); + + /* Set refresh rate */ + GT_WRITE(DRAM_BANK0_PARMS, 0x3f); + GT_WRITE(DRAM_CFG, 0x100); + + /* we have to lob off the top bits rememeber!! */ + PROGRAM_GT_BAR(RAS10, SH4_TO_PCI(PCI_DRAM_BASE), PCI_DRAM_SIZE); + +#endif + + /* We are only interested in decoding RAS10 and the Galileo's internal + * registers (as IO) on the PCI bus + */ +#ifdef ENABLE_PCI_DRAM + GT_WRITE(BAR_ENABLE_ADR, (~((1 << 8) | (1 << 3))) & 0x1ff); +#else + GT_WRITE(BAR_ENABLE_ADR, (~(1 << 3)) & 0x1ff); +#endif + + /* Change the class code to host bridge, it actually powers up + * as a memory controller + */ + GT_CONFIG_WRITE(8, 0x06000011); + + /* Allow the galileo to master the PCI bus */ + GT_CONFIG_WRITE(PCI_COMMAND, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_IO); + + +#if 0 + printk("Testing PCI DRAM - "); + if(test_dram(PCI_DRAM_BASE,PCI_DRAM_SIZE)) { + printk("Passed\n"); + }else { + printk("FAILED\n"); + } +#endif + return 0; + +} + + +#define SET_CONFIG_BITS(bus,devfn,where)\ + ((1<<31) | ((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) + +#define CONFIG_CMD(dev, where) SET_CONFIG_BITS((dev)->bus->number,(dev)->devfn,where) + +/* This write to the galileo config registers, unlike the functions below, can + * be used before the PCI subsystem has started up + */ +static int __init write_config_to_galileo(int where, u32 val) +{ + GT_WRITE(PCI_CFG_ADR, SET_CONFIG_BITS(0, 0, where)); + + GT_WRITE(PCI_CFG_DATA, val); + return 0; +} + +/* We exclude the galileo and slot 31, the galileo because I don't know how to stop + * the setup code shagging up the setup I have done on it, and 31 because the whole + * thing locks up if you try to access that slot (which doesn't exist of course anyway + */ + +#define EXCLUDED_DEV(dev) ((dev->bus->number==0) && ((PCI_SLOT(dev->devfn)==0) || (PCI_SLOT(dev->devfn) == 31))) + +static int galileo_read_config_byte(struct pci_dev *dev, int where, + u8 * val) +{ + + + /* I suspect this doesn't work because this drives a special cycle ? */ + if (EXCLUDED_DEV(dev)) { + *val = 0xff; + return PCIBIOS_SUCCESSFUL; + } + /* Start the config cycle */ + GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); + /* Read back the result */ + *val = GT_READ_BYTE(PCI_CFG_DATA + (where & 3)); + + return PCIBIOS_SUCCESSFUL; +} + + +static int galileo_read_config_word(struct pci_dev *dev, int where, + u16 * val) +{ + + if (EXCLUDED_DEV(dev)) { + *val = 0xffff; + return PCIBIOS_SUCCESSFUL; + } + + GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); + *val = GT_READ_SHORT(PCI_CFG_DATA + (where & 2)); + + return PCIBIOS_SUCCESSFUL; +} + + +static int galileo_read_config_dword(struct pci_dev *dev, int where, + u32 * val) +{ + if (EXCLUDED_DEV(dev)) { + *val = 0xffffffff; + return PCIBIOS_SUCCESSFUL; + } + + GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); + *val = GT_READ(PCI_CFG_DATA); + + return PCIBIOS_SUCCESSFUL; +} + +static int galileo_write_config_byte(struct pci_dev *dev, int where, + u8 val) +{ + GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); + + GT_WRITE_BYTE(PCI_CFG_DATA + (where & 3), val); + + return PCIBIOS_SUCCESSFUL; +} + + +static int galileo_write_config_word(struct pci_dev *dev, int where, + u16 val) +{ + GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); + + GT_WRITE_SHORT(PCI_CFG_DATA + (where & 2), val); + + return PCIBIOS_SUCCESSFUL; +} + +static int galileo_write_config_dword(struct pci_dev *dev, int where, + u32 val) +{ + GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); + + GT_WRITE(PCI_CFG_DATA, val); + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops pci_config_ops = { + galileo_read_config_byte, + galileo_read_config_word, + galileo_read_config_dword, + galileo_write_config_byte, + galileo_write_config_word, + galileo_write_config_dword +}; + + +/* Everything hangs off this */ +static struct pci_bus *pci_root_bus; + + +static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin) +{ + return PCI_SLOT(dev->devfn); +} + +static int __init map_od_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* Slot 1: Galileo + * Slot 2: PCI Slot 1 + * Slot 3: PCI Slot 2 + * Slot 4: ESS + */ + switch (slot) { + case 2: + return OVERDRIVE_PCI_IRQ1; + case 3: + /* Note this assumes you have a hacked card in slot 2 */ + return OVERDRIVE_PCI_IRQ2; + case 4: + return OVERDRIVE_ESS_IRQ; + default: + /* printk("PCI: Unexpected IRQ mapping request for slot %d\n", slot); */ + return -1; + } +} + + + +void __init +pcibios_fixup_pbus_ranges(struct pci_bus *bus, struct pbus_set_ranges_data *ranges) +{ + ranges->io_start -= bus->resource[0]->start; + ranges->io_end -= bus->resource[0]->start; + ranges->mem_start -= bus->resource[1]->start; + ranges->mem_end -= bus->resource[1]->start; +} + +static void __init pci_fixup_ide_bases(struct pci_dev *d) +{ + int i; + + /* + * PCI IDE controllers use non-standard I/O port decoding, respect it. + */ + if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + printk("PCI: IDE base address fixup for %s\n", pci_name(d)); + for(i=0; i<4; i++) { + struct resource *r = &d->resource[i]; + if ((r->start & ~0x80) == 0x374) { + r->start |= 2; + r->end = r->start; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); + +void __init pcibios_init(void) +{ + static struct resource galio,galmem; + + /* Allocate the registers used by the Galileo */ + galio.flags = IORESOURCE_IO; + galio.name = "Galileo GT64011"; + galmem.flags = IORESOURCE_MEM|IORESOURCE_PREFETCH; + galmem.name = "Galileo GT64011 DRAM"; + + allocate_resource(&ioport_resource, &galio, 256, + GT64111_IO_BASE_ADDRESS,GT64111_IO_BASE_ADDRESS+256, 256, NULL, NULL); + allocate_resource(&iomem_resource, &galmem,PCI_DRAM_SIZE, + PHYSADDR(PCI_DRAM_BASE), PHYSADDR(PCI_DRAM_BASE)+PCI_DRAM_SIZE, + PCI_DRAM_SIZE, NULL, NULL); + + /* ok, do the scan man */ + pci_root_bus = pci_scan_bus(0, &pci_config_ops, NULL); + + pci_assign_unassigned_resources(); + pci_fixup_irqs(no_swizzle, map_od_irq); + +#ifdef TEST_DRAM + printk("Testing PCI DRAM - "); + if(test_dram(PCI_DRAM_BASE,PCI_DRAM_SIZE)) { + printk("Passed\n"); + }else { + printk("FAILED\n"); + } +#endif + +} + +char * __init pcibios_setup(char *str) +{ + return str; +} + + + +int pcibios_enable_device(struct pci_dev *dev) +{ + + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for (idx = 0; idx < 6; idx++) { + r = dev->resource + idx; + if (!r->start && r->end) { + printk(KERN_ERR + "PCI: Device %s not available because" + " of resource collisions\n", + pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (cmd != old_cmd) { + printk("PCI: enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; + +} + +/* We should do some optimisation work here I think. Ok for now though */ +void __init pcibios_fixup_bus(struct pci_bus *bus) +{ + +} + +void pcibios_align_resource(void *data, struct resource *res, + unsigned long size) +{ +} + +void __init pcibios_update_resource(struct pci_dev *dev, struct resource *root, + struct resource *res, int resource) +{ + + unsigned long where, size; + u32 reg; + + + printk("PCI: Assigning %3s %08lx to %s\n", + res->flags & IORESOURCE_IO ? "IO" : "MEM", + res->start, dev->name); + + where = PCI_BASE_ADDRESS_0 + resource * 4; + size = res->end - res->start; + + pci_read_config_dword(dev, where, ®); + reg = (reg & size) | (((u32) (res->start - root->start)) & ~size); + pci_write_config_dword(dev, where, reg); +} + + +void __init pcibios_update_irq(struct pci_dev *dev, int irq) +{ + printk("PCI: Assigning IRQ %02d to %s\n", irq, dev->name); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +/* + * If we set up a device for bus mastering, we need to check the latency + * timer as certain crappy BIOSes forget to set it properly. + */ +unsigned int pcibios_max_latency = 255; + +void pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + else + return; + printk("PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} diff --git a/arch/sh/boards/overdrive/io.c b/arch/sh/boards/overdrive/io.c new file mode 100644 index 00000000000..65f3fd0563d --- /dev/null +++ b/arch/sh/boards/overdrive/io.c @@ -0,0 +1,173 @@ +/* + * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains the I/O routines for use on the overdrive board + * + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/addrspace.h> + +#include <asm/overdrive/overdrive.h> + +/* + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the SuperH architecture, we just read/write the + * memory location directly. + */ + +#define dprintk(x...) + +/* Translates an IO address to where it is mapped in memory */ + +#define io_addr(x) (((unsigned)(x))|PCI_GTIO_BASE) + +unsigned char od_inb(unsigned long port) +{ +dprintk("od_inb(%x)\n", port); + return readb(io_addr(port)) & 0xff; +} + + +unsigned short od_inw(unsigned long port) +{ +dprintk("od_inw(%x)\n", port); + return readw(io_addr(port)) & 0xffff; +} + +unsigned int od_inl(unsigned long port) +{ +dprintk("od_inl(%x)\n", port); + return readl(io_addr(port)); +} + +void od_outb(unsigned char value, unsigned long port) +{ +dprintk("od_outb(%x, %x)\n", value, port); + writeb(value, io_addr(port)); +} + +void od_outw(unsigned short value, unsigned long port) +{ +dprintk("od_outw(%x, %x)\n", value, port); + writew(value, io_addr(port)); +} + +void od_outl(unsigned int value, unsigned long port) +{ +dprintk("od_outl(%x, %x)\n", value, port); + writel(value, io_addr(port)); +} + +/* This is horrible at the moment - needs more work to do something sensible */ +#define IO_DELAY() udelay(10) + +#define OUT_DELAY(x,type) \ +void od_out##x##_p(unsigned type value,unsigned long port){out##x(value,port);IO_DELAY();} + +#define IN_DELAY(x,type) \ +unsigned type od_in##x##_p(unsigned long port) {unsigned type tmp=in##x(port);IO_DELAY();return tmp;} + + +OUT_DELAY(b,char) +OUT_DELAY(w,short) +OUT_DELAY(l,int) + +IN_DELAY(b,char) +IN_DELAY(w,short) +IN_DELAY(l,int) + + +/* Now for the string version of these functions */ +void od_outsb(unsigned long port, const void *addr, unsigned long count) +{ + int i; + unsigned char *p = (unsigned char *) addr; + + for (i = 0; i < count; i++, p++) { + outb(*p, port); + } +} + + +void od_insb(unsigned long port, void *addr, unsigned long count) +{ + int i; + unsigned char *p = (unsigned char *) addr; + + for (i = 0; i < count; i++, p++) { + *p = inb(port); + } +} + +/* For the 16 and 32 bit string functions, we have to worry about alignment. + * The SH does not do unaligned accesses, so we have to read as bytes and + * then write as a word or dword. + * This can be optimised a lot more, especially in the case where the data + * is aligned + */ + +void od_outsw(unsigned long port, const void *addr, unsigned long count) +{ + int i; + unsigned short tmp; + unsigned char *p = (unsigned char *) addr; + + for (i = 0; i < count; i++, p += 2) { + tmp = (*p) | ((*(p + 1)) << 8); + outw(tmp, port); + } +} + + +void od_insw(unsigned long port, void *addr, unsigned long count) +{ + int i; + unsigned short tmp; + unsigned char *p = (unsigned char *) addr; + + for (i = 0; i < count; i++, p += 2) { + tmp = inw(port); + p[0] = tmp & 0xff; + p[1] = (tmp >> 8) & 0xff; + } +} + + +void od_outsl(unsigned long port, const void *addr, unsigned long count) +{ + int i; + unsigned tmp; + unsigned char *p = (unsigned char *) addr; + + for (i = 0; i < count; i++, p += 4) { + tmp = (*p) | ((*(p + 1)) << 8) | ((*(p + 2)) << 16) | + ((*(p + 3)) << 24); + outl(tmp, port); + } +} + + +void od_insl(unsigned long port, void *addr, unsigned long count) +{ + int i; + unsigned tmp; + unsigned char *p = (unsigned char *) addr; + + for (i = 0; i < count; i++, p += 4) { + tmp = inl(port); + p[0] = tmp & 0xff; + p[1] = (tmp >> 8) & 0xff; + p[2] = (tmp >> 16) & 0xff; + p[3] = (tmp >> 24) & 0xff; + + } +} diff --git a/arch/sh/boards/overdrive/irq.c b/arch/sh/boards/overdrive/irq.c new file mode 100644 index 00000000000..23adc6be71e --- /dev/null +++ b/arch/sh/boards/overdrive/irq.c @@ -0,0 +1,192 @@ +/* + * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Looks after interrupts on the overdrive board. + * + * Bases on the IPR irq system + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/system.h> +#include <asm/io.h> + +#include <asm/overdrive/overdrive.h> + +struct od_data { + int overdrive_irq; + int irq_mask; +}; + +#define NUM_EXTERNAL_IRQS 16 +#define EXTERNAL_IRQ_NOT_IN_USE (-1) +#define EXTERNAL_IRQ_NOT_ASSIGNED (-1) + +/* + * This table is used to determine what to program into the FPGA's CT register + * for the specified Linux IRQ. + * + * The irq_mask gives the interrupt number from the PCI board (PCI_Int(6:0)) + * but is one greater than that because the because the FPGA treats 0 + * as disabled, a value of 1 asserts PCI_Int0, and so on. + * + * The overdrive_irq specifies which of the eight interrupt sources generates + * that interrupt, and but is multiplied by four to give the bit offset into + * the CT register. + * + * The seven interrupts levels (SH4 IRL's) we have available here is hardwired + * by the EPLD. The assignments here of which PCI interrupt generates each + * level is arbitary. + */ +static struct od_data od_data_table[NUM_EXTERNAL_IRQS] = { + /* overdrive_irq , irq_mask */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 0 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, 7}, /* 1 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, 6}, /* 2 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 3 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, 5}, /* 4 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 5 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 6 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, 4}, /* 7 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 8 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 9 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, 3}, /* 10 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, 2}, /* 11 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 12 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, 1}, /* 13 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 14 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE} /* 15 */ +}; + +static void set_od_data(int overdrive_irq, int irq) +{ + if (irq >= NUM_EXTERNAL_IRQS || irq < 0) + return; + od_data_table[irq].overdrive_irq = overdrive_irq << 2; +} + +static void enable_od_irq(unsigned int irq); +void disable_od_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_od_irq disable_od_irq + +static void mask_and_ack_od(unsigned int); +static void end_od_irq(unsigned int irq); + +static unsigned int startup_od_irq(unsigned int irq) +{ + enable_od_irq(irq); + return 0; /* never anything pending */ +} + +static struct hw_interrupt_type od_irq_type = { + "Overdrive-IRQ", + startup_od_irq, + shutdown_od_irq, + enable_od_irq, + disable_od_irq, + mask_and_ack_od, + end_od_irq +}; + +static void disable_od_irq(unsigned int irq) +{ + unsigned val, flags; + int overdrive_irq; + unsigned mask; + + /* Not a valid interrupt */ + if (irq < 0 || irq >= NUM_EXTERNAL_IRQS) + return; + + /* Is is necessary to use a cli here? Would a spinlock not be + * mroe efficient? + */ + local_irq_save(flags); + overdrive_irq = od_data_table[irq].overdrive_irq; + if (overdrive_irq != EXTERNAL_IRQ_NOT_ASSIGNED) { + mask = ~(0x7 << overdrive_irq); + val = ctrl_inl(OVERDRIVE_INT_CT); + val &= mask; + ctrl_outl(val, OVERDRIVE_INT_CT); + } + local_irq_restore(flags); +} + +static void enable_od_irq(unsigned int irq) +{ + unsigned val, flags; + int overdrive_irq; + unsigned mask; + + /* Not a valid interrupt */ + if (irq < 0 || irq >= NUM_EXTERNAL_IRQS) + return; + + /* Set priority in OD back to original value */ + local_irq_save(flags); + /* This one is not in use currently */ + overdrive_irq = od_data_table[irq].overdrive_irq; + if (overdrive_irq != EXTERNAL_IRQ_NOT_ASSIGNED) { + val = ctrl_inl(OVERDRIVE_INT_CT); + mask = ~(0x7 << overdrive_irq); + val &= mask; + mask = od_data_table[irq].irq_mask << overdrive_irq; + val |= mask; + ctrl_outl(val, OVERDRIVE_INT_CT); + } + local_irq_restore(flags); +} + + + +/* this functions sets the desired irq handler to be an overdrive type */ +static void __init make_od_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &od_irq_type; + disable_od_irq(irq); +} + + +static void mask_and_ack_od(unsigned int irq) +{ + disable_od_irq(irq); +} + +static void end_od_irq(unsigned int irq) +{ + enable_od_irq(irq); +} + +void __init init_overdrive_irq(void) +{ + int i; + + /* Disable all interrupts */ + ctrl_outl(0, OVERDRIVE_INT_CT); + + /* Update interrupt pin mode to use encoded interrupts */ + i = ctrl_inw(INTC_ICR); + i &= ~INTC_ICR_IRLM; + ctrl_outw(i, INTC_ICR); + + for (i = 0; i < NUM_EXTERNAL_IRQS; i++) { + if (od_data_table[i].irq_mask != EXTERNAL_IRQ_NOT_IN_USE) { + make_od_irq(i); + } else if (i != 15) { // Cannot use imask on level 15 + make_imask_irq(i); + } + } + + /* Set up the interrupts */ + set_od_data(OVERDRIVE_PCI_INTA, OVERDRIVE_PCI_IRQ1); + set_od_data(OVERDRIVE_PCI_INTB, OVERDRIVE_PCI_IRQ2); + set_od_data(OVERDRIVE_AUDIO_INT, OVERDRIVE_ESS_IRQ); +} diff --git a/arch/sh/boards/overdrive/led.c b/arch/sh/boards/overdrive/led.c new file mode 100644 index 00000000000..734742e9227 --- /dev/null +++ b/arch/sh/boards/overdrive/led.c @@ -0,0 +1,59 @@ +/* + * linux/arch/sh/overdrive/led.c + * + * Copyright (C) 1999 Stuart Menefy <stuart.menefy@st.com> + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains an Overdrive specific LED feature. + */ + +#include <linux/config.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/overdrive/overdrive.h> + +static void mach_led(int position, int value) +{ + unsigned long flags; + unsigned long reg; + + local_irq_save(flags); + + reg = readl(OVERDRIVE_CTRL); + if (value) { + reg |= (1<<3); + } else { + reg &= ~(1<<3); + } + writel(reg, OVERDRIVE_CTRL); + + local_irq_restore(flags); +} + +#ifdef CONFIG_HEARTBEAT + +#include <linux/sched.h> + +/* acts like an actual heart beat -- ie thump-thump-pause... */ +void heartbeat_od(void) +{ + static unsigned cnt = 0, period = 0, dist = 0; + + if (cnt == 0 || cnt == dist) + mach_led( -1, 1); + else if (cnt == 7 || cnt == dist+7) + mach_led( -1, 0); + + if (++cnt > period) { + cnt = 0; + /* The hyperbolic function below modifies the heartbeat period + * length in dependency of the current (5min) load. It goes + * through the points f(0)=126, f(1)=86, f(5)=51, + * f(inf)->30. */ + period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30; + dist = period / 4; + } +} +#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/overdrive/mach.c b/arch/sh/boards/overdrive/mach.c new file mode 100644 index 00000000000..2834a03ae47 --- /dev/null +++ b/arch/sh/boards/overdrive/mach.c @@ -0,0 +1,62 @@ +/* + * linux/arch/sh/overdrive/mach.c + * + * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Machine vector for the STMicroelectronics Overdrive + */ + +#include <linux/init.h> + +#include <asm/machvec.h> +#include <asm/rtc.h> +#include <asm/machvec_init.h> + +#include <asm/io_unknown.h> +#include <asm/io_generic.h> +#include <asm/overdrive/io.h> + +void heartbeat_od(void); +void init_overdrive_irq(void); +void galileo_pcibios_init(void); + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_od __initmv = { + .mv_nr_irqs = 48, + + .mv_inb = od_inb, + .mv_inw = od_inw, + .mv_inl = od_inl, + .mv_outb = od_outb, + .mv_outw = od_outw, + .mv_outl = od_outl, + + .mv_inb_p = od_inb_p, + .mv_inw_p = od_inw_p, + .mv_inl_p = od_inl_p, + .mv_outb_p = od_outb_p, + .mv_outw_p = od_outw_p, + .mv_outl_p = od_outl_p, + + .mv_insb = od_insb, + .mv_insw = od_insw, + .mv_insl = od_insl, + .mv_outsb = od_outsb, + .mv_outsw = od_outsw, + .mv_outsl = od_outsl, + +#ifdef CONFIG_PCI + .mv_init_irq = init_overdrive_irq, +#endif +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_od, +#endif +}; + +ALIAS_MV(od) diff --git a/arch/sh/boards/overdrive/pcidma.c b/arch/sh/boards/overdrive/pcidma.c new file mode 100644 index 00000000000..1c9bfeda00b --- /dev/null +++ b/arch/sh/boards/overdrive/pcidma.c @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Dynamic DMA mapping support. + * + * On the overdrive, we can only DMA from memory behind the PCI bus! + * this means that all DMA'able memory must come from there. + * this restriction will not apply to later boards. + */ + +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/pci.h> +#include <asm/io.h> + +void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, + dma_addr_t * dma_handle) +{ + void *ret; + int gfp = GFP_ATOMIC; + + printk("BUG: pci_alloc_consistent() called - not yet supported\n"); + /* We ALWAYS need DMA memory on the overdrive hardware, + * due to it's extreme weirdness + * Need to flush the cache here as well, since the memory + * can still be seen through the cache! + */ + gfp |= GFP_DMA; + ret = (void *) __get_free_pages(gfp, get_order(size)); + + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = virt_to_bus(ret); + } + return ret; +} + +void pci_free_consistent(struct pci_dev *hwdev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + free_pages((unsigned long) vaddr, get_order(size)); +} diff --git a/arch/sh/boards/overdrive/setup.c b/arch/sh/boards/overdrive/setup.c new file mode 100644 index 00000000000..a36ce0284ed --- /dev/null +++ b/arch/sh/boards/overdrive/setup.c @@ -0,0 +1,41 @@ +/* + * arch/sh/overdrive/setup.c + * + * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * STMicroelectronics Overdrive Support. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/io.h> + +#include <asm/overdrive/overdrive.h> +#include <asm/overdrive/fpga.h> + +extern void od_time_init(void); + +const char *get_system_type(void) +{ + return "SH7750 Overdrive"; +} + +/* + * Initialize the board + */ +int __init platform_setup(void) +{ +#ifdef CONFIG_PCI + init_overdrive_fpga(); + galileo_init(); +#endif + + board_time_init = od_time_init; + + /* Enable RS232 receive buffers */ + writel(0x1e, OVERDRIVE_CTRL); +} diff --git a/arch/sh/boards/overdrive/time.c b/arch/sh/boards/overdrive/time.c new file mode 100644 index 00000000000..68533690e09 --- /dev/null +++ b/arch/sh/boards/overdrive/time.c @@ -0,0 +1,119 @@ +/* + * arch/sh/boards/overdrive/time.c + * + * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) + * Copyright (C) 2002 Paul Mundt (lethal@chaoticdreams.org) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * STMicroelectronics Overdrive Support. + */ + +void od_time_init(void) +{ + struct frqcr_data { + unsigned short frqcr; + struct { + unsigned char multiplier; + unsigned char divisor; + } factor[3]; + }; + + static struct frqcr_data st40_frqcr_table[] = { + { 0x000, {{1,1}, {1,1}, {1,2}}}, + { 0x002, {{1,1}, {1,1}, {1,4}}}, + { 0x004, {{1,1}, {1,1}, {1,8}}}, + { 0x008, {{1,1}, {1,2}, {1,2}}}, + { 0x00A, {{1,1}, {1,2}, {1,4}}}, + { 0x00C, {{1,1}, {1,2}, {1,8}}}, + { 0x011, {{1,1}, {2,3}, {1,6}}}, + { 0x013, {{1,1}, {2,3}, {1,3}}}, + { 0x01A, {{1,1}, {1,2}, {1,4}}}, + { 0x01C, {{1,1}, {1,2}, {1,8}}}, + { 0x023, {{1,1}, {2,3}, {1,3}}}, + { 0x02C, {{1,1}, {1,2}, {1,8}}}, + { 0x048, {{1,2}, {1,2}, {1,4}}}, + { 0x04A, {{1,2}, {1,2}, {1,6}}}, + { 0x04C, {{1,2}, {1,2}, {1,8}}}, + { 0x05A, {{1,2}, {1,3}, {1,6}}}, + { 0x05C, {{1,2}, {1,3}, {1,6}}}, + { 0x063, {{1,2}, {1,4}, {1,4}}}, + { 0x06C, {{1,2}, {1,4}, {1,8}}}, + { 0x091, {{1,3}, {1,3}, {1,6}}}, + { 0x093, {{1,3}, {1,3}, {1,6}}}, + { 0x0A3, {{1,3}, {1,6}, {1,6}}}, + { 0x0DA, {{1,4}, {1,4}, {1,8}}}, + { 0x0DC, {{1,4}, {1,4}, {1,8}}}, + { 0x0EC, {{1,4}, {1,8}, {1,8}}}, + { 0x123, {{1,4}, {1,4}, {1,8}}}, + { 0x16C, {{1,4}, {1,8}, {1,8}}}, + }; + + struct memclk_data { + unsigned char multiplier; + unsigned char divisor; + }; + static struct memclk_data st40_memclk_table[8] = { + {1,1}, // 000 + {1,2}, // 001 + {1,3}, // 010 + {2,3}, // 011 + {1,4}, // 100 + {1,6}, // 101 + {1,8}, // 110 + {1,8} // 111 + }; + + unsigned long pvr; + + /* + * This should probably be moved into the SH3 probing code, and then + * use the processor structure to determine which CPU we are running + * on. + */ + pvr = ctrl_inl(CCN_PVR); + printk("PVR %08x\n", pvr); + + if (((pvr >> CCN_PVR_CHIP_SHIFT) & CCN_PVR_CHIP_MASK) == CCN_PVR_CHIP_ST40STB1) { + /* + * Unfortunatly the STB1 FRQCR values are different from the + * 7750 ones. + */ + struct frqcr_data *d; + int a; + unsigned long memclkcr; + struct memclk_data *e; + + for (a=0; a<ARRAY_SIZE(st40_frqcr_table); a++) { + d = &st40_frqcr_table[a]; + if (d->frqcr == (frqcr & 0x1ff)) + break; + } + if (a == ARRAY_SIZE(st40_frqcr_table)) { + d = st40_frqcr_table; + printk("ERROR: Unrecognised FRQCR value, using default multipliers\n"); + } + + memclkcr = ctrl_inl(CLOCKGEN_MEMCLKCR); + e = &st40_memclk_table[memclkcr & MEMCLKCR_RATIO_MASK]; + + printk("Clock multipliers: CPU: %d/%d Bus: %d/%d Mem: %d/%d Periph: %d/%d\n", + d->factor[0].multiplier, d->factor[0].divisor, + d->factor[1].multiplier, d->factor[1].divisor, + e->multiplier, e->divisor, + d->factor[2].multiplier, d->factor[2].divisor); + + current_cpu_data.master_clock = current_cpu_data.module_clock * + d->factor[2].divisor / + d->factor[2].multiplier; + current_cpu_data.bus_clock = current_cpu_data.master_clock * + d->factor[1].multiplier / + d->factor[1].divisor; + current_cpu_data.memory_clock = current_cpu_data.master_clock * + e->multiplier / e->divisor; + current_cpu_data.cpu_clock = current_cpu_data.master_clock * + d->factor[0].multiplier / + d->factor[0].divisor; +} + diff --git a/arch/sh/boards/renesas/edosk7705/Makefile b/arch/sh/boards/renesas/edosk7705/Makefile new file mode 100644 index 00000000000..7fccbf2e4a1 --- /dev/null +++ b/arch/sh/boards/renesas/edosk7705/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the EDOSK7705 specific parts of the kernel +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). +# + +obj-y := setup.o io.o + diff --git a/arch/sh/boards/renesas/edosk7705/io.c b/arch/sh/boards/renesas/edosk7705/io.c new file mode 100644 index 00000000000..541cea2a652 --- /dev/null +++ b/arch/sh/boards/renesas/edosk7705/io.c @@ -0,0 +1,94 @@ +/* + * arch/sh/boards/renesas/edosk7705/io.c + * + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routines for Hitachi EDOSK7705 board. + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/edosk7705/io.h> +#include <asm/addrspace.h> + +#define SMC_IOADDR 0xA2000000 + +#define maybebadio(name,port) \ + printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ + #name, (port), (__u32) __builtin_return_address(0)) + +/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */ +unsigned long sh_edosk7705_isa_port2addr(unsigned long port) +{ + if (port >= 0x300 && port < 0x320) { + /* SMC91C96 registers are 4 byte aligned rather than the + * usual 2 byte! + */ + return SMC_IOADDR + ( (port - 0x300) * 2); + } + + maybebadio(sh_edosk7705_isa_port2addr, port); + return port; +} + +/* Trying to read / write bytes on odd-byte boundaries to the Ethernet + * registers causes problems. So we bit-shift the value and read / write + * in 2 byte chunks. Setting the low byte to 0 does not cause problems + * now as odd byte writes are only made on the bit mask / interrupt + * register. This may not be the case in future Mar-2003 SJD + */ +unsigned char sh_edosk7705_inb(unsigned long port) +{ + if (port >= 0x300 && port < 0x320 && port & 0x01) { + return (volatile unsigned char)(generic_inw(port -1) >> 8); + } + return *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port); +} + +unsigned int sh_edosk7705_inl(unsigned long port) +{ + return *(volatile unsigned long *)port; +} + +void sh_edosk7705_outb(unsigned char value, unsigned long port) +{ + if (port >= 0x300 && port < 0x320 && port & 0x01) { + generic_outw(((unsigned short)value << 8), port -1); + return; + } + *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port) = value; +} + +void sh_edosk7705_outl(unsigned int value, unsigned long port) +{ + *(volatile unsigned long *)port = value; +} + +void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count) +{ + unsigned char *p = addr; + while (count--) *p++ = sh_edosk7705_inb(port); +} + +void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count) +{ + unsigned long *p = (unsigned long*)addr; + while (count--) + *p++ = *(volatile unsigned long *)port; +} + +void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count) +{ + unsigned char *p = (unsigned char*)addr; + while (count--) sh_edosk7705_outb(*p++, port); +} + +void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count) +{ + unsigned long *p = (unsigned long*)addr; + while (count--) sh_edosk7705_outl(*p++, port); +} + diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/renesas/edosk7705/setup.c new file mode 100644 index 00000000000..8b6f0c2af09 --- /dev/null +++ b/arch/sh/boards/renesas/edosk7705/setup.c @@ -0,0 +1,60 @@ +/* + * arch/sh/boards/renesas/edosk7705/setup.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine Support. + * + * Modified for edosk7705 development + * board by S. Dunn, 2003. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <asm/machvec.h> +#include <asm/machvec_init.h> +#include <asm/edosk7705/io.h> + +static void init_edosk7705(void); + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_edosk7705 __initmv = { + .mv_nr_irqs = 80, + + .mv_inb = sh_edosk7705_inb, + .mv_inl = sh_edosk7705_inl, + .mv_outb = sh_edosk7705_outb, + .mv_outl = sh_edosk7705_outl, + + .mv_inl_p = sh_edosk7705_inl, + .mv_outl_p = sh_edosk7705_outl, + + .mv_insb = sh_edosk7705_insb, + .mv_insl = sh_edosk7705_insl, + .mv_outsb = sh_edosk7705_outsb, + .mv_outsl = sh_edosk7705_outsl, + + .mv_isa_port2addr = sh_edosk7705_isa_port2addr, + .mv_init_irq = init_edosk7705, +}; +ALIAS_MV(edosk7705) + +static void __init init_edosk7705(void) +{ + /* This is the Ethernet interrupt */ + make_imask_irq(0x09); +} + +const char *get_system_type(void) +{ + return "EDOSK7705"; +} + +void __init platform_setup(void) +{ + /* Nothing .. */ +} + diff --git a/arch/sh/boards/renesas/hs7751rvoip/Makefile b/arch/sh/boards/renesas/hs7751rvoip/Makefile new file mode 100644 index 00000000000..e8b4109ace1 --- /dev/null +++ b/arch/sh/boards/renesas/hs7751rvoip/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for the HS7751RVoIP specific parts of the kernel +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). +# + +obj-y := mach.o setup.o io.o irq.o led.o + +obj-$(CONFIG_PCI) += pci.o + diff --git a/arch/sh/boards/renesas/hs7751rvoip/io.c b/arch/sh/boards/renesas/hs7751rvoip/io.c new file mode 100644 index 00000000000..456753d2649 --- /dev/null +++ b/arch/sh/boards/renesas/hs7751rvoip/io.c @@ -0,0 +1,310 @@ +/* + * linux/arch/sh/kernel/io_hs7751rvoip.c + * + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routine for Renesas Technology sales HS7751RVoIP + * + * Initial version only to support LAN access; some + * placeholder code from io_hs7751rvoip.c left in with the + * expectation of later SuperIO and PCMCIA access. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/hs7751rvoip/hs7751rvoip.h> +#include <asm/addrspace.h> + +#include <linux/module.h> +#include <linux/pci.h> +#include "../../../drivers/pci/pci-sh7751.h" + +extern void *area5_io8_base; /* Area 5 8bit I/O Base address */ +extern void *area6_io8_base; /* Area 6 8bit I/O Base address */ +extern void *area5_io16_base; /* Area 5 16bit I/O Base address */ +extern void *area6_io16_base; /* Area 6 16bit I/O Base address */ + +/* + * The 7751R HS7751RVoIP uses the built-in PCI controller (PCIC) + * of the 7751R processor, and has a SuperIO accessible via the PCI. + * The board also includes a PCMCIA controller on its memory bus, + * like the other Solution Engine boards. + */ + +#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) +#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) +#define PCI_IO_AREA SH7751_PCI_IO_BASE +#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE + +#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) + +#if defined(CONFIG_HS7751RVOIP_CODEC) +#define CODEC_IO_BASE 0x1000 +#endif + +#define maybebadio(name,port) \ + printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ + #name, (port), (__u32) __builtin_return_address(0)) + +static inline void delay(void) +{ + ctrl_inw(0xa0000000); +} + +static inline unsigned long port2adr(unsigned int port) +{ + if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) + if (port == 0x3f6) + return ((unsigned long)area5_io16_base + 0x0c); + else + return ((unsigned long)area5_io16_base + 0x800 + ((port-0x1f0) << 1)); + else + maybebadio(port2adr, (unsigned long)port); + return port; +} + +/* The 7751R HS7751RVoIP seems to have everything hooked */ +/* up pretty normally (nothing on high-bytes only...) so this */ +/* shouldn't be needed */ +static inline int shifted_port(unsigned long port) +{ + /* For IDE registers, value is not shifted */ + if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) + return 0; + else + return 1; +} + +#if defined(CONFIG_HS7751RVOIP_CODEC) +static inline int +codec_port(unsigned long port) +{ + if (CODEC_IO_BASE <= port && port < (CODEC_IO_BASE+0x20)) + return 1; + else + return 0; +} +#endif + +/* In case someone configures the kernel w/o PCI support: in that */ +/* scenario, don't ever bother to check for PCI-window addresses */ + +/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ +#if defined(CONFIG_PCI) +#define CHECK_SH7751_PCIIO(port) \ + ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) +#else +#define CHECK_SH7751_PCIIO(port) (0) +#endif + +/* + * General outline: remap really low stuff [eventually] to SuperIO, + * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) + * is mapped through the PCI IO window. Stuff with high bits (PXSEG) + * should be way beyond the window, and is used w/o translation for + * compatibility. + */ +unsigned char hs7751rvoip_inb(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned char *)port; +#if defined(CONFIG_HS7751RVOIP_CODEC) + else if (codec_port(port)) + return *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)); +#endif + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + return *(volatile unsigned char *)PCI_IOMAP(port); + else + return (*(volatile unsigned short *)port2adr(port) & 0xff); +} + +unsigned char hs7751rvoip_inb_p(unsigned long port) +{ + unsigned char v; + + if (PXSEG(port)) + v = *(volatile unsigned char *)port; +#if defined(CONFIG_HS7751RVOIP_CODEC) + else if (codec_port(port)) + v = *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)); +#endif + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + v = *(volatile unsigned char *)PCI_IOMAP(port); + else + v = (*(volatile unsigned short *)port2adr(port) & 0xff); + delay(); + return v; +} + +unsigned short hs7751rvoip_inw(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned short *)port; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + return *(volatile unsigned short *)PCI_IOMAP(port); + else + maybebadio(inw, port); + return 0; +} + +unsigned int hs7751rvoip_inl(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned long *)port; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + return *(volatile unsigned long *)PCI_IOMAP(port); + else + maybebadio(inl, port); + return 0; +} + +void hs7751rvoip_outb(unsigned char value, unsigned long port) +{ + + if (PXSEG(port)) + *(volatile unsigned char *)port = value; +#if defined(CONFIG_HS7751RVOIP_CODEC) + else if (codec_port(port)) + *(volatile unsigned cjar *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)) = value; +#endif + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + *(unsigned char *)PCI_IOMAP(port) = value; + else + *(volatile unsigned short *)port2adr(port) = value; +} + +void hs7751rvoip_outb_p(unsigned char value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned char *)port = value; +#if defined(CONFIG_HS7751RVOIP_CODEC) + else if (codec_port(port)) + *(volatile unsigned cjar *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)) = value; +#endif + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + *(unsigned char *)PCI_IOMAP(port) = value; + else + *(volatile unsigned short *)port2adr(port) = value; + delay(); +} + +void hs7751rvoip_outw(unsigned short value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned short *)port = value; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + *(unsigned short *)PCI_IOMAP(port) = value; + else + maybebadio(outw, port); +} + +void hs7751rvoip_outl(unsigned int value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned long *)port = value; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + *((unsigned long *)PCI_IOMAP(port)) = value; + else + maybebadio(outl, port); +} + +void hs7751rvoip_insb(unsigned long port, void *addr, unsigned long count) +{ + if (PXSEG(port)) + while (count--) *((unsigned char *) addr)++ = *(volatile unsigned char *)port; +#if defined(CONFIG_HS7751RVOIP_CODEC) + else if (codec_port(port)) + while (count--) *((unsigned char *) addr)++ = *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)); +#endif + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { + volatile __u8 *bp = (__u8 *)PCI_IOMAP(port); + + while (count--) *((volatile unsigned char *) addr)++ = *bp; + } else { + volatile __u16 *p = (volatile unsigned short *)port2adr(port); + + while (count--) *((unsigned char *) addr)++ = *p & 0xff; + } +} + +void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count) +{ + volatile __u16 *p; + + if (PXSEG(port)) + p = (volatile unsigned short *)port; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + p = (volatile unsigned short *)PCI_IOMAP(port); + else + p = (volatile unsigned short *)port2adr(port); + while (count--) *((__u16 *) addr)++ = *p; +} + +void hs7751rvoip_insl(unsigned long port, void *addr, unsigned long count) +{ + if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { + volatile __u32 *p = (__u32 *)PCI_IOMAP(port); + + while (count--) *((__u32 *) addr)++ = *p; + } else + maybebadio(insl, port); +} + +void hs7751rvoip_outsb(unsigned long port, const void *addr, unsigned long count) +{ + if (PXSEG(port)) + while (count--) *(volatile unsigned char *)port = *((unsigned char *) addr)++; +#if defined(CONFIG_HS7751RVOIP_CODEC) + else if (codec_port(port)) + while (count--) *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)) = *((unsigned char *) addr)++; +#endif + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { + volatile __u8 *bp = (__u8 *)PCI_IOMAP(port); + + while (count--) *bp = *((volatile unsigned char *) addr)++; + } else { + volatile __u16 *p = (volatile unsigned short *)port2adr(port); + + while (count--) *p = *((unsigned char *) addr)++; + } +} + +void hs7751rvoip_outsw(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u16 *p; + + if (PXSEG(port)) + p = (volatile unsigned short *)port; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + p = (volatile unsigned short *)PCI_IOMAP(port); + else + p = (volatile unsigned short *)port2adr(port); + while (count--) *p = *((__u16 *) addr)++; +} + +void hs7751rvoip_outsl(unsigned long port, const void *addr, unsigned long count) +{ + if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { + volatile __u32 *p = (__u32 *)PCI_IOMAP(port); + + while (count--) *p = *((__u32 *) addr)++; + } else + maybebadio(outsl, port); +} + +void *hs7751rvoip_ioremap(unsigned long offset, unsigned long size) +{ + if (offset >= 0xfd000000) + return (void *)offset; + else + return (void *)P2SEGADDR(offset); +} +EXPORT_SYMBOL(hs7751rvoip_ioremap); + +unsigned long hs7751rvoip_isa_port2addr(unsigned long offset) +{ + return port2adr(offset); +} diff --git a/arch/sh/boards/renesas/hs7751rvoip/irq.c b/arch/sh/boards/renesas/hs7751rvoip/irq.c new file mode 100644 index 00000000000..a7921f67a35 --- /dev/null +++ b/arch/sh/boards/renesas/hs7751rvoip/irq.c @@ -0,0 +1,122 @@ +/* + * linux/arch/sh/boards/renesas/hs7751rvoip/irq.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Renesas Technology Sales HS7751RVoIP Support. + * + * Modified for HS7751RVoIP by + * Atom Create Engineering Co., Ltd. 2002. + * Lineo uSolutions, Inc. 2003. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/hs7751rvoip/hs7751rvoip.h> + +static int mask_pos[] = {8, 9, 10, 11, 12, 13, 0, 1, 2, 3, 4, 5, 6, 7}; + +static void enable_hs7751rvoip_irq(unsigned int irq); +static void disable_hs7751rvoip_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_hs7751rvoip_irq disable_hs7751rvoip_irq + +static void ack_hs7751rvoip_irq(unsigned int irq); +static void end_hs7751rvoip_irq(unsigned int irq); + +static unsigned int startup_hs7751rvoip_irq(unsigned int irq) +{ + enable_hs7751rvoip_irq(irq); + return 0; /* never anything pending */ +} + +static void disable_hs7751rvoip_irq(unsigned int irq) +{ + unsigned long flags; + unsigned short val; + unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]); + + /* Set the priority in IPR to 0 */ + local_irq_save(flags); + val = ctrl_inw(IRLCNTR3); + val &= mask; + ctrl_outw(val, IRLCNTR3); + local_irq_restore(flags); +} + +static void enable_hs7751rvoip_irq(unsigned int irq) +{ + unsigned long flags; + unsigned short val; + unsigned short value = (0x0001 << mask_pos[irq]); + + /* Set priority in IPR back to original value */ + local_irq_save(flags); + val = ctrl_inw(IRLCNTR3); + val |= value; + ctrl_outw(val, IRLCNTR3); + local_irq_restore(flags); +} + +static void ack_hs7751rvoip_irq(unsigned int irq) +{ + disable_hs7751rvoip_irq(irq); +} + +static void end_hs7751rvoip_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_hs7751rvoip_irq(irq); +} + +static struct hw_interrupt_type hs7751rvoip_irq_type = { + "HS7751RVoIP IRQ", + startup_hs7751rvoip_irq, + shutdown_hs7751rvoip_irq, + enable_hs7751rvoip_irq, + disable_hs7751rvoip_irq, + ack_hs7751rvoip_irq, + end_hs7751rvoip_irq, +}; + +static void make_hs7751rvoip_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &hs7751rvoip_irq_type; + disable_hs7751rvoip_irq(irq); +} + +/* + * Initialize IRQ setting + */ +void __init init_hs7751rvoip_IRQ(void) +{ + int i; + + /* IRL0=ON HOOK1 + * IRL1=OFF HOOK1 + * IRL2=ON HOOK2 + * IRL3=OFF HOOK2 + * IRL4=Ringing Detection + * IRL5=CODEC + * IRL6=Ethernet + * IRL7=Ethernet Hub + * IRL8=USB Communication + * IRL9=USB Connection + * IRL10=USB DMA + * IRL11=CF Card + * IRL12=PCMCIA + * IRL13=PCI Slot + */ + ctrl_outw(0x9876, IRLCNTR1); + ctrl_outw(0xdcba, IRLCNTR2); + ctrl_outw(0x0050, IRLCNTR4); + ctrl_outw(0x4321, IRLCNTR5); + + for (i=0; i<14; i++) + make_hs7751rvoip_irq(i); +} diff --git a/arch/sh/boards/renesas/hs7751rvoip/led.c b/arch/sh/boards/renesas/hs7751rvoip/led.c new file mode 100644 index 00000000000..18a13c8da8a --- /dev/null +++ b/arch/sh/boards/renesas/hs7751rvoip/led.c @@ -0,0 +1,27 @@ +/* + * linux/arch/sh/kernel/setup_hs7751rvoip.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Renesas Technology Sales HS7751RVoIP Support. + * + * Modified for HS7751RVoIP by + * Atom Create Engineering Co., Ltd. 2002. + * Lineo uSolutions, Inc. 2003. + */ + +#include <linux/config.h> +#include <asm/io.h> +#include <asm/hs7751rvoip/hs7751rvoip.h> + +extern unsigned int debug_counter; + +void debug_led_disp(void) +{ + unsigned short value; + + value = (unsigned char)debug_counter++; + ctrl_outb((0xf0|value), PA_OUTPORTR); + if (value == 0x0f) + debug_counter = 0; +} diff --git a/arch/sh/boards/renesas/hs7751rvoip/mach.c b/arch/sh/boards/renesas/hs7751rvoip/mach.c new file mode 100644 index 00000000000..8bbed60220c --- /dev/null +++ b/arch/sh/boards/renesas/hs7751rvoip/mach.c @@ -0,0 +1,55 @@ +/* + * linux/arch/sh/kernel/mach_hs7751rvoip.c + * + * Minor tweak of mach_se.c file to reference hs7751rvoip-specific items. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Machine vector for the Renesas Technology sales HS7751RVoIP + */ + +#include <linux/config.h> +#include <linux/init.h> + +#include <asm/machvec.h> +#include <asm/rtc.h> +#include <asm/irq.h> +#include <asm/hs7751rvoip/io.h> + +extern void init_hs7751rvoip_IRQ(void); +extern void *hs7751rvoip_ioremap(unsigned long, unsigned long); + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_hs7751rvoip __initmv = { + .mv_nr_irqs = 72, + + .mv_inb = hs7751rvoip_inb, + .mv_inw = hs7751rvoip_inw, + .mv_inl = hs7751rvoip_inl, + .mv_outb = hs7751rvoip_outb, + .mv_outw = hs7751rvoip_outw, + .mv_outl = hs7751rvoip_outl, + + .mv_inb_p = hs7751rvoip_inb_p, + .mv_inw_p = hs7751rvoip_inw, + .mv_inl_p = hs7751rvoip_inl, + .mv_outb_p = hs7751rvoip_outb_p, + .mv_outw_p = hs7751rvoip_outw, + .mv_outl_p = hs7751rvoip_outl, + + .mv_insb = hs7751rvoip_insb, + .mv_insw = hs7751rvoip_insw, + .mv_insl = hs7751rvoip_insl, + .mv_outsb = hs7751rvoip_outsb, + .mv_outsw = hs7751rvoip_outsw, + .mv_outsl = hs7751rvoip_outsl, + + .mv_ioremap = hs7751rvoip_ioremap, + .mv_isa_port2addr = hs7751rvoip_isa_port2addr, + .mv_init_irq = init_hs7751rvoip_IRQ, +}; +ALIAS_MV(hs7751rvoip) diff --git a/arch/sh/boards/renesas/hs7751rvoip/pci.c b/arch/sh/boards/renesas/hs7751rvoip/pci.c new file mode 100644 index 00000000000..7a442d1eca4 --- /dev/null +++ b/arch/sh/boards/renesas/hs7751rvoip/pci.c @@ -0,0 +1,150 @@ +/* + * linux/arch/sh/kernel/pci-hs7751rvoip.c + * + * Author: Ian DaSilva (idasilva@mvista.com) + * + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the Renesas SH7751R HS7751RVoIP board + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/module.h> + +#include <asm/io.h> +#include "../../../drivers/pci/pci-sh7751.h" +#include <asm/hs7751rvoip/hs7751rvoip.h> + +#define PCIMCR_MRSET_OFF 0xBFFFFFFF +#define PCIMCR_RFSH_OFF 0xFFFFFFFB + +/* + * Only long word accesses of the PCIC's internal local registers and the + * configuration registers from the CPU is supported. + */ +#define PCIC_WRITE(x,v) writel((v), PCI_REG(x)) +#define PCIC_READ(x) readl(PCI_REG(x)) + +/* + * Description: This function sets up and initializes the pcic, sets + * up the BARS, maps the DRAM into the address space etc, etc. + */ +int __init pcibios_init_platform(void) +{ + unsigned long bcr1, wcr1, wcr2, wcr3, mcr; + unsigned short bcr2, bcr3; + + /* + * Initialize the slave bus controller on the pcic. The values used + * here should not be hardcoded, but they should be taken from the bsc + * on the processor, to make this function as generic as possible. + * (i.e. Another sbc may usr different SDRAM timing settings -- in order + * for the pcic to work, its settings need to be exactly the same.) + */ + bcr1 = (*(volatile unsigned long *)(SH7751_BCR1)); + bcr2 = (*(volatile unsigned short *)(SH7751_BCR2)); + bcr3 = (*(volatile unsigned short *)(SH7751_BCR3)); + wcr1 = (*(volatile unsigned long *)(SH7751_WCR1)); + wcr2 = (*(volatile unsigned long *)(SH7751_WCR2)); + wcr3 = (*(volatile unsigned long *)(SH7751_WCR3)); + mcr = (*(volatile unsigned long *)(SH7751_MCR)); + + bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */ + (*(volatile unsigned long *)(SH7751_BCR1)) = bcr1; + + bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ + PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */ + PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */ + PCIC_WRITE(SH7751_PCIBCR3, bcr3); /* PCIC BCR3 */ + PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */ + PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */ + PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */ + mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; + PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */ + + /* Enable all interrupts, so we know what to fix */ + PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff); + PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f); + + /* Set up standard PCI config registers */ + PCIC_WRITE(SH7751_PCICONF1, 0xFB900047); /* Bus Master, Mem & I/O access */ + PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */ + PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */ + PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */ + PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */ + PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */ + PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */ + PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */ + PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */ + PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */ + + /* Now turn it on... */ + PCIC_WRITE(SH7751_PCICR, 0xa5000001); + + /* + * Set PCIMBR and PCIIOBR here, assuming a single window + * (16M MEM, 256K IO) is enough. If a larger space is + * needed, the readx/writex and inx/outx functions will + * have to do more (e.g. setting registers for each call). + */ + + /* + * Set the MBR so PCI address is one-to-one with window, + * meaning all calls go straight through... use ifdef to + * catch erroneous assumption. + */ + BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE); + + PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM); + + /* Set IOBR for window containing area specified in pci.h */ + PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK)); + + /* All done, may as well say so... */ + printk("SH7751R PCI: Finished initialization of the PCI controller\n"); + + return 1; +} + +int __init pcibios_map_platform_irq(u8 slot, u8 pin) +{ + switch (slot) { + case 0: return IRQ_PCISLOT; /* PCI Extend slot */ + case 1: return IRQ_PCMCIA; /* PCI Cardbus Bridge */ + case 2: return IRQ_PCIETH; /* Realtek Ethernet controller */ + case 3: return IRQ_PCIHUB; /* Realtek Ethernet Hub controller */ + default: + printk("PCI: Bad IRQ mapping request for slot %d\n", slot); + return -1; + } +} + +static struct resource sh7751_io_resource = { + .name = "SH7751_IO", + .start = 0x4000, + .end = 0x4000 + SH7751_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7751_mem_resource = { + .name = "SH7751_mem", + .start = SH7751_PCI_MEMORY_BASE, + .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +extern struct pci_ops sh7751_pci_ops; + +struct pci_channel board_pci_channels[] = { + { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c new file mode 100644 index 00000000000..f1a78b6c714 --- /dev/null +++ b/arch/sh/boards/renesas/hs7751rvoip/setup.c @@ -0,0 +1,89 @@ +/* + * linux/arch/sh/kernel/setup_hs7751rvoip.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Renesas Technology Sales HS7751RVoIP Support. + * + * Modified for HS7751RVoIP by + * Atom Create Engineering Co., Ltd. 2002. + * Lineo uSolutions, Inc. 2003. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <asm/io.h> +#include <asm/hs7751rvoip/hs7751rvoip.h> + +#include <linux/mm.h> +#include <linux/vmalloc.h> + +/* defined in mm/ioremap.c */ +extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags); + +unsigned int debug_counter; + +const char *get_system_type(void) +{ + return "HS7751RVoIP"; +} + +/* + * Initialize the board + */ +void __init platform_setup(void) +{ + printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n"); + ctrl_outb(0xf0, PA_OUTPORTR); + debug_counter = 0; +} + +void *area5_io8_base; +void *area6_io8_base; +void *area5_io16_base; +void *area6_io16_base; + +int __init cf_init(void) +{ + pgprot_t prot; + unsigned long paddrbase, psize; + + /* open I/O area window */ + paddrbase = virt_to_phys((void *)(PA_AREA5_IO+0x00000800)); + psize = PAGE_SIZE; + prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_COM16); + area5_io16_base = p3_ioremap(paddrbase, psize, prot.pgprot); + if (!area5_io16_base) { + printk("allocate_cf_area : can't open CF I/O window!\n"); + return -ENOMEM; + } + + /* XXX : do we need attribute and common-memory area also? */ + + paddrbase = virt_to_phys((void *)PA_AREA6_IO); + psize = PAGE_SIZE; +#if defined(CONFIG_HS7751RVOIP_CODEC) + prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_COM8); +#else + prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO8); +#endif + area6_io8_base = p3_ioremap(paddrbase, psize, prot.pgprot); + if (!area6_io8_base) { + printk("allocate_cf_area : can't open CODEC I/O 8bit window!\n"); + return -ENOMEM; + } + prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16); + area6_io16_base = p3_ioremap(paddrbase, psize, prot.pgprot); + if (!area6_io16_base) { + printk("allocate_cf_area : can't open CODEC I/O 16bit window!\n"); + return -ENOMEM; + } + + return 0; +} + +__initcall (cf_init); diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/renesas/rts7751r2d/Makefile new file mode 100644 index 00000000000..daa53334bdc --- /dev/null +++ b/arch/sh/boards/renesas/rts7751r2d/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the RTS7751R2D specific parts of the kernel +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). +# + +obj-y := mach.o setup.o io.o irq.o led.o + diff --git a/arch/sh/boards/renesas/rts7751r2d/io.c b/arch/sh/boards/renesas/rts7751r2d/io.c new file mode 100644 index 00000000000..c46f9154cfd --- /dev/null +++ b/arch/sh/boards/renesas/rts7751r2d/io.c @@ -0,0 +1,319 @@ +/* + * linux/arch/sh/kernel/io_rts7751r2d.c + * + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routine for Renesas Technology sales RTS7751R2D. + * + * Initial version only to support LAN access; some + * placeholder code from io_rts7751r2d.c left in with the + * expectation of later SuperIO and PCMCIA access. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/rts7751r2d/rts7751r2d.h> +#include <asm/addrspace.h> + +#include <linux/module.h> +#include <linux/pci.h> +#include "../../../drivers/pci/pci-sh7751.h" + +/* + * The 7751R RTS7751R2D uses the built-in PCI controller (PCIC) + * of the 7751R processor, and has a SuperIO accessible via the PCI. + * The board also includes a PCMCIA controller on its memory bus, + * like the other Solution Engine boards. + */ + +#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) +#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) +#define PCI_IO_AREA SH7751_PCI_IO_BASE +#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE + +#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) + +#define maybebadio(name,port) \ + printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ + #name, (port), (__u32) __builtin_return_address(0)) + +static inline void delay(void) +{ + ctrl_inw(0xa0000000); +} + +static inline unsigned long port2adr(unsigned int port) +{ + if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) + if (port == 0x3f6) + return (PA_AREA5_IO + 0x80c); + else + return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1)); + else + maybebadio(port2adr, (unsigned long)port); + + return port; +} + +static inline unsigned long port88796l(unsigned int port, int flag) +{ + unsigned long addr; + + if (flag) + addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1); + else + addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1) + 0x1000; + + return addr; +} + +/* The 7751R RTS7751R2D seems to have everything hooked */ +/* up pretty normally (nothing on high-bytes only...) so this */ +/* shouldn't be needed */ +static inline int shifted_port(unsigned long port) +{ + /* For IDE registers, value is not shifted */ + if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) + return 0; + else + return 1; +} + +/* In case someone configures the kernel w/o PCI support: in that */ +/* scenario, don't ever bother to check for PCI-window addresses */ + +/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ +#if defined(CONFIG_PCI) +#define CHECK_SH7751_PCIIO(port) \ + ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) +#else +#define CHECK_SH7751_PCIIO(port) (0) +#endif + +#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE) +#define CHECK_AX88796L_PORT(port) \ + ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20))) +#else +#define CHECK_AX88796L_PORT(port) (0) +#endif + +/* + * General outline: remap really low stuff [eventually] to SuperIO, + * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) + * is mapped through the PCI IO window. Stuff with high bits (PXSEG) + * should be way beyond the window, and is used w/o translation for + * compatibility. + */ +unsigned char rts7751r2d_inb(unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + return (*(volatile unsigned short *)port88796l(port, 0)) & 0xff; + else if (PXSEG(port)) + return *(volatile unsigned char *)port; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + return *(volatile unsigned char *)PCI_IOMAP(port); + else + return (*(volatile unsigned short *)port2adr(port) & 0xff); +} + +unsigned char rts7751r2d_inb_p(unsigned long port) +{ + unsigned char v; + + if (CHECK_AX88796L_PORT(port)) + v = (*(volatile unsigned short *)port88796l(port, 0)) & 0xff; + else if (PXSEG(port)) + v = *(volatile unsigned char *)port; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + v = *(volatile unsigned char *)PCI_IOMAP(port); + else + v = (*(volatile unsigned short *)port2adr(port) & 0xff); + delay(); + + return v; +} + +unsigned short rts7751r2d_inw(unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + maybebadio(inw, port); + else if (PXSEG(port)) + return *(volatile unsigned short *)port; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + return *(volatile unsigned short *)PCI_IOMAP(port); + else + maybebadio(inw, port); + + return 0; +} + +unsigned int rts7751r2d_inl(unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + maybebadio(inl, port); + else if (PXSEG(port)) + return *(volatile unsigned long *)port; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + return *(volatile unsigned long *)PCI_IOMAP(port); + else + maybebadio(inl, port); + + return 0; +} + +void rts7751r2d_outb(unsigned char value, unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + *((volatile unsigned short *)port88796l(port, 0)) = value; + else if (PXSEG(port)) + *(volatile unsigned char *)port = value; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + *(volatile unsigned char *)PCI_IOMAP(port) = value; + else + *(volatile unsigned short *)port2adr(port) = value; +} + +void rts7751r2d_outb_p(unsigned char value, unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + *((volatile unsigned short *)port88796l(port, 0)) = value; + else if (PXSEG(port)) + *(volatile unsigned char *)port = value; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + *(volatile unsigned char *)PCI_IOMAP(port) = value; + else + *(volatile unsigned short *)port2adr(port) = value; + delay(); +} + +void rts7751r2d_outw(unsigned short value, unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + maybebadio(outw, port); + else if (PXSEG(port)) + *(volatile unsigned short *)port = value; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + *(volatile unsigned short *)PCI_IOMAP(port) = value; + else + maybebadio(outw, port); +} + +void rts7751r2d_outl(unsigned int value, unsigned long port) +{ + if (CHECK_AX88796L_PORT(port)) + maybebadio(outl, port); + else if (PXSEG(port)) + *(volatile unsigned long *)port = value; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + *(volatile unsigned long *)PCI_IOMAP(port) = value; + else + maybebadio(outl, port); +} + +void rts7751r2d_insb(unsigned long port, void *addr, unsigned long count) +{ + volatile __u8 *bp; + volatile __u16 *p; + + if (CHECK_AX88796L_PORT(port)) { + p = (volatile unsigned short *)port88796l(port, 0); + while (count--) *((unsigned char *) addr)++ = *p & 0xff; + } else if (PXSEG(port)) + while (count--) *((unsigned char *) addr)++ = *(volatile unsigned char *)port; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { + bp = (__u8 *)PCI_IOMAP(port); + while (count--) *((volatile unsigned char *) addr)++ = *bp; + } else { + p = (volatile unsigned short *)port2adr(port); + while (count--) *((unsigned char *) addr)++ = *p & 0xff; + } +} + +void rts7751r2d_insw(unsigned long port, void *addr, unsigned long count) +{ + volatile __u16 *p; + + if (CHECK_AX88796L_PORT(port)) + p = (volatile unsigned short *)port88796l(port, 1); + else if (PXSEG(port)) + p = (volatile unsigned short *)port; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + p = (volatile unsigned short *)PCI_IOMAP(port); + else + p = (volatile unsigned short *)port2adr(port); + while (count--) *((__u16 *) addr)++ = *p; +} + +void rts7751r2d_insl(unsigned long port, void *addr, unsigned long count) +{ + if (CHECK_AX88796L_PORT(port)) + maybebadio(insl, port); + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { + volatile __u32 *p = (__u32 *)PCI_IOMAP(port); + + while (count--) *((__u32 *) addr)++ = *p; + } else + maybebadio(insl, port); +} + +void rts7751r2d_outsb(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u8 *bp; + volatile __u16 *p; + + if (CHECK_AX88796L_PORT(port)) { + p = (volatile unsigned short *)port88796l(port, 0); + while (count--) *p = *((unsigned char *) addr)++; + } else if (PXSEG(port)) + while (count--) *(volatile unsigned char *)port = *((unsigned char *) addr)++; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { + bp = (__u8 *)PCI_IOMAP(port); + while (count--) *bp = *((volatile unsigned char *) addr)++; + } else { + p = (volatile unsigned short *)port2adr(port); + while (count--) *p = *((unsigned char *) addr)++; + } +} + +void rts7751r2d_outsw(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u16 *p; + + if (CHECK_AX88796L_PORT(port)) + p = (volatile unsigned short *)port88796l(port, 1); + else if (PXSEG(port)) + p = (volatile unsigned short *)port; + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) + p = (volatile unsigned short *)PCI_IOMAP(port); + else + p = (volatile unsigned short *)port2adr(port); + while (count--) *p = *((__u16 *) addr)++; +} + +void rts7751r2d_outsl(unsigned long port, const void *addr, unsigned long count) +{ + if (CHECK_AX88796L_PORT(port)) + maybebadio(outsl, port); + else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { + volatile __u32 *p = (__u32 *)PCI_IOMAP(port); + + while (count--) *p = *((__u32 *) addr)++; + } else + maybebadio(outsl, port); +} + +void *rts7751r2d_ioremap(unsigned long offset, unsigned long size) +{ + if (offset >= 0xfd000000) + return (void *)offset; + else + return (void *)P2SEGADDR(offset); +} +EXPORT_SYMBOL(rts7751r2d_ioremap); + +unsigned long rts7751r2d_isa_port2addr(unsigned long offset) +{ + return port2adr(offset); +} diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c new file mode 100644 index 00000000000..95717f4f1e2 --- /dev/null +++ b/arch/sh/boards/renesas/rts7751r2d/irq.c @@ -0,0 +1,135 @@ +/* + * linux/arch/sh/boards/renesas/rts7751r2d/irq.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Renesas Technology Sales RTS7751R2D Support. + * + * Modified for RTS7751R2D by + * Atom Create Engineering Co., Ltd. 2002. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/rts7751r2d/rts7751r2d.h> + +#if defined(CONFIG_RTS7751R2D_REV11) +static int mask_pos[] = {11, 9, 8, 12, 10, 6, 5, 4, 7, 14, 13, 0, 0, 0, 0}; +#else +static int mask_pos[] = {6, 11, 9, 8, 12, 10, 5, 4, 7, 14, 13, 0, 0, 0, 0}; +#endif + +extern int voyagergx_irq_demux(int irq); +extern void setup_voyagergx_irq(void); + +static void enable_rts7751r2d_irq(unsigned int irq); +static void disable_rts7751r2d_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_rts7751r2d_irq disable_rts7751r2d_irq + +static void ack_rts7751r2d_irq(unsigned int irq); +static void end_rts7751r2d_irq(unsigned int irq); + +static unsigned int startup_rts7751r2d_irq(unsigned int irq) +{ + enable_rts7751r2d_irq(irq); + return 0; /* never anything pending */ +} + +static void disable_rts7751r2d_irq(unsigned int irq) +{ + unsigned long flags; + unsigned short val; + unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]); + + /* Set the priority in IPR to 0 */ + local_irq_save(flags); + val = ctrl_inw(IRLCNTR1); + val &= mask; + ctrl_outw(val, IRLCNTR1); + local_irq_restore(flags); +} + +static void enable_rts7751r2d_irq(unsigned int irq) +{ + unsigned long flags; + unsigned short val; + unsigned short value = (0x0001 << mask_pos[irq]); + + /* Set priority in IPR back to original value */ + local_irq_save(flags); + val = ctrl_inw(IRLCNTR1); + val |= value; + ctrl_outw(val, IRLCNTR1); + local_irq_restore(flags); +} + +int rts7751r2d_irq_demux(int irq) +{ + int demux_irq; + + demux_irq = voyagergx_irq_demux(irq); + return demux_irq; +} + +static void ack_rts7751r2d_irq(unsigned int irq) +{ + disable_rts7751r2d_irq(irq); +} + +static void end_rts7751r2d_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_rts7751r2d_irq(irq); +} + +static struct hw_interrupt_type rts7751r2d_irq_type = { + "RTS7751R2D IRQ", + startup_rts7751r2d_irq, + shutdown_rts7751r2d_irq, + enable_rts7751r2d_irq, + disable_rts7751r2d_irq, + ack_rts7751r2d_irq, + end_rts7751r2d_irq, +}; + +static void make_rts7751r2d_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &rts7751r2d_irq_type; + disable_rts7751r2d_irq(irq); +} + +/* + * Initialize IRQ setting + */ +void __init init_rts7751r2d_IRQ(void) +{ + int i; + + /* IRL0=KEY Input + * IRL1=Ethernet + * IRL2=CF Card + * IRL3=CF Card Insert + * IRL4=PCMCIA + * IRL5=VOYAGER + * IRL6=RTC Alarm + * IRL7=RTC Timer + * IRL8=SD Card + * IRL9=PCI Slot #1 + * IRL10=PCI Slot #2 + * IRL11=Extention #0 + * IRL12=Extention #1 + * IRL13=Extention #2 + * IRL14=Extention #3 + */ + + for (i=0; i<15; i++) + make_rts7751r2d_irq(i); + + setup_voyagergx_irq(); +} diff --git a/arch/sh/boards/renesas/rts7751r2d/led.c b/arch/sh/boards/renesas/rts7751r2d/led.c new file mode 100644 index 00000000000..9993259a894 --- /dev/null +++ b/arch/sh/boards/renesas/rts7751r2d/led.c @@ -0,0 +1,67 @@ +/* + * linux/arch/sh/kernel/led_rts7751r2d.c + * + * Copyright (C) Atom Create Engineering Co., Ltd. + * + * May be copied or modified under the terms of GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains Renesas Technology Sales RTS7751R2D specific LED code. + */ + +#include <linux/config.h> +#include <asm/io.h> +#include <asm/rts7751r2d/rts7751r2d.h> + +extern unsigned int debug_counter; + +#ifdef CONFIG_HEARTBEAT + +#include <linux/sched.h> + +/* Cycle the LED's in the clasic Knightriger/Sun pattern */ +void heartbeat_rts7751r2d(void) +{ + static unsigned int cnt = 0, period = 0; + volatile unsigned short *p = (volatile unsigned short *)PA_OUTPORT; + static unsigned bit = 0, up = 1; + + cnt += 1; + if (cnt < period) + return; + + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110 + */ + period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT))); + + *p = 1 << bit; + if (up) + if (bit == 7) { + bit--; + up = 0; + } else + bit++; + else if (bit == 0) + up = 1; + else + bit--; +} +#endif /* CONFIG_HEARTBEAT */ + +void rts7751r2d_led(unsigned short value) +{ + ctrl_outw(value, PA_OUTPORT); +} + +void debug_led_disp(void) +{ + unsigned short value; + + value = (unsigned short)debug_counter++; + rts7751r2d_led(value); + if (value == 0xff) + debug_counter = 0; +} diff --git a/arch/sh/boards/renesas/rts7751r2d/mach.c b/arch/sh/boards/renesas/rts7751r2d/mach.c new file mode 100644 index 00000000000..1efc18e786d --- /dev/null +++ b/arch/sh/boards/renesas/rts7751r2d/mach.c @@ -0,0 +1,70 @@ +/* + * linux/arch/sh/kernel/mach_rts7751r2d.c + * + * Minor tweak of mach_se.c file to reference rts7751r2d-specific items. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Machine vector for the Renesas Technology sales RTS7751R2D + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/types.h> + +#include <asm/machvec.h> +#include <asm/rtc.h> +#include <asm/irq.h> +#include <asm/rts7751r2d/io.h> + +extern void heartbeat_rts7751r2d(void); +extern void init_rts7751r2d_IRQ(void); +extern void *rts7751r2d_ioremap(unsigned long, unsigned long); +extern int rts7751r2d_irq_demux(int irq); + +extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, int); +extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t); + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_rts7751r2d __initmv = { + .mv_nr_irqs = 72, + + .mv_inb = rts7751r2d_inb, + .mv_inw = rts7751r2d_inw, + .mv_inl = rts7751r2d_inl, + .mv_outb = rts7751r2d_outb, + .mv_outw = rts7751r2d_outw, + .mv_outl = rts7751r2d_outl, + + .mv_inb_p = rts7751r2d_inb_p, + .mv_inw_p = rts7751r2d_inw, + .mv_inl_p = rts7751r2d_inl, + .mv_outb_p = rts7751r2d_outb_p, + .mv_outw_p = rts7751r2d_outw, + .mv_outl_p = rts7751r2d_outl, + + .mv_insb = rts7751r2d_insb, + .mv_insw = rts7751r2d_insw, + .mv_insl = rts7751r2d_insl, + .mv_outsb = rts7751r2d_outsb, + .mv_outsw = rts7751r2d_outsw, + .mv_outsl = rts7751r2d_outsl, + + .mv_ioremap = rts7751r2d_ioremap, + .mv_isa_port2addr = rts7751r2d_isa_port2addr, + .mv_init_irq = init_rts7751r2d_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_rts7751r2d, +#endif + .mv_irq_demux = rts7751r2d_irq_demux, + +#ifdef CONFIG_USB_OHCI_HCD + .mv_consistent_alloc = voyagergx_consistent_alloc, + .mv_consistent_free = voyagergx_consistent_free, +#endif +}; +ALIAS_MV(rts7751r2d) diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c new file mode 100644 index 00000000000..2587fd1a024 --- /dev/null +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -0,0 +1,31 @@ +/* + * linux/arch/sh/kernel/setup_rts7751r2d.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Renesas Technology Sales RTS7751R2D Support. + * + * Modified for RTS7751R2D by + * Atom Create Engineering Co., Ltd. 2002. + */ + +#include <linux/init.h> +#include <asm/io.h> +#include <asm/rts7751r2d/rts7751r2d.h> + +unsigned int debug_counter; + +const char *get_system_type(void) +{ + return "RTS7751R2D"; +} + +/* + * Initialize the board + */ +void __init platform_setup(void) +{ + printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); + ctrl_outw(0x0000, PA_OUTPORT); + debug_counter = 0; +} diff --git a/arch/sh/boards/renesas/systemh/Makefile b/arch/sh/boards/renesas/systemh/Makefile new file mode 100644 index 00000000000..2cc6a23d9d3 --- /dev/null +++ b/arch/sh/boards/renesas/systemh/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for the SystemH specific parts of the kernel +# + +obj-y := setup.o irq.o io.o + +# XXX: This wants to be consolidated in arch/sh/drivers/pci, and more +# importantly, with the generic sh7751_pcic_init() code. For now, we'll +# just abuse the hell out of kbuild, because we can.. + +obj-$(CONFIG_PCI) += pci.o +pci-y := ../../se/7751/pci.o + diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/renesas/systemh/io.c new file mode 100644 index 00000000000..cf979011aa9 --- /dev/null +++ b/arch/sh/boards/renesas/systemh/io.c @@ -0,0 +1,283 @@ +/* + * linux/arch/sh/boards/systemh/io.c + * + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routine for Hitachi 7751 Systemh. + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/systemh/7751systemh.h> +#include <asm/addrspace.h> +#include <asm/io.h> + +#include <linux/pci.h> +#include "../../drivers/pci/pci-sh7751.h" + +/* + * The 7751 SystemH Engine uses the built-in PCI controller (PCIC) + * of the 7751 processor, and has a SuperIO accessible on its memory + * bus. + */ + +#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) +#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) +#define PCI_IO_AREA SH7751_PCI_IO_BASE +#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE + +#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) +#define ETHER_IOMAP(adr) (0xB3000000 + (adr)) /*map to 16bits access area + of smc lan chip*/ + +#define maybebadio(name,port) \ + printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ + #name, (port), (__u32) __builtin_return_address(0)) + +static inline void delay(void) +{ + ctrl_inw(0xa0000000); +} + +static inline volatile __u16 * +port2adr(unsigned int port) +{ + if (port >= 0x2000) + return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); +#if 0 + else + return (volatile __u16 *) (PA_SUPERIO + (port << 1)); +#endif + maybebadio(name,(unsigned long)port); + return (volatile __u16*)port; +} + +/* In case someone configures the kernel w/o PCI support: in that */ +/* scenario, don't ever bother to check for PCI-window addresses */ + +/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ +#if defined(CONFIG_PCI) +#define CHECK_SH7751_PCIIO(port) \ + ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) +#else +#define CHECK_SH7751_PCIIO(port) (0) +#endif + +/* + * General outline: remap really low stuff [eventually] to SuperIO, + * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) + * is mapped through the PCI IO window. Stuff with high bits (PXSEG) + * should be way beyond the window, and is used w/o translation for + * compatibility. + */ +unsigned char sh7751systemh_inb(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned char *)port; + else if (CHECK_SH7751_PCIIO(port)) + return *(volatile unsigned char *)PCI_IOMAP(port); + else if (port <= 0x3F1) + return *(volatile unsigned char *)ETHER_IOMAP(port); + else + return (*port2adr(port))&0xff; +} + +unsigned char sh7751systemh_inb_p(unsigned long port) +{ + unsigned char v; + + if (PXSEG(port)) + v = *(volatile unsigned char *)port; + else if (CHECK_SH7751_PCIIO(port)) + v = *(volatile unsigned char *)PCI_IOMAP(port); + else if (port <= 0x3F1) + v = *(volatile unsigned char *)ETHER_IOMAP(port); + else + v = (*port2adr(port))&0xff; + delay(); + return v; +} + +unsigned short sh7751systemh_inw(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned short *)port; + else if (CHECK_SH7751_PCIIO(port)) + return *(volatile unsigned short *)PCI_IOMAP(port); + else if (port >= 0x2000) + return *port2adr(port); + else if (port <= 0x3F1) + return *(volatile unsigned int *)ETHER_IOMAP(port); + else + maybebadio(inw, port); + return 0; +} + +unsigned int sh7751systemh_inl(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned long *)port; + else if (CHECK_SH7751_PCIIO(port)) + return *(volatile unsigned int *)PCI_IOMAP(port); + else if (port >= 0x2000) + return *port2adr(port); + else if (port <= 0x3F1) + return *(volatile unsigned int *)ETHER_IOMAP(port); + else + maybebadio(inl, port); + return 0; +} + +void sh7751systemh_outb(unsigned char value, unsigned long port) +{ + + if (PXSEG(port)) + *(volatile unsigned char *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned char*)PCI_IOMAP(port)) = value; + else if (port <= 0x3F1) + *(volatile unsigned char *)ETHER_IOMAP(port) = value; + else + *(port2adr(port)) = value; +} + +void sh7751systemh_outb_p(unsigned char value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned char *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned char*)PCI_IOMAP(port)) = value; + else if (port <= 0x3F1) + *(volatile unsigned char *)ETHER_IOMAP(port) = value; + else + *(port2adr(port)) = value; + delay(); +} + +void sh7751systemh_outw(unsigned short value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned short *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned short *)PCI_IOMAP(port)) = value; + else if (port >= 0x2000) + *port2adr(port) = value; + else if (port <= 0x3F1) + *(volatile unsigned short *)ETHER_IOMAP(port) = value; + else + maybebadio(outw, port); +} + +void sh7751systemh_outl(unsigned int value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned long *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned long*)PCI_IOMAP(port)) = value; + else + maybebadio(outl, port); +} + +void sh7751systemh_insb(unsigned long port, void *addr, unsigned long count) +{ + unsigned char *p = addr; + while (count--) *p++ = sh7751systemh_inb(port); +} + +void sh7751systemh_insw(unsigned long port, void *addr, unsigned long count) +{ + unsigned short *p = addr; + while (count--) *p++ = sh7751systemh_inw(port); +} + +void sh7751systemh_insl(unsigned long port, void *addr, unsigned long count) +{ + maybebadio(insl, port); +} + +void sh7751systemh_outsb(unsigned long port, const void *addr, unsigned long count) +{ + unsigned char *p = (unsigned char*)addr; + while (count--) sh7751systemh_outb(*p++, port); +} + +void sh7751systemh_outsw(unsigned long port, const void *addr, unsigned long count) +{ + unsigned short *p = (unsigned short*)addr; + while (count--) sh7751systemh_outw(*p++, port); +} + +void sh7751systemh_outsl(unsigned long port, const void *addr, unsigned long count) +{ + maybebadio(outsw, port); +} + +/* For read/write calls, just copy generic (pass-thru); PCIMBR is */ +/* already set up. For a larger memory space, these would need to */ +/* reset PCIMBR as needed on a per-call basis... */ + +unsigned char sh7751systemh_readb(unsigned long addr) +{ + return *(volatile unsigned char*)addr; +} + +unsigned short sh7751systemh_readw(unsigned long addr) +{ + return *(volatile unsigned short*)addr; +} + +unsigned int sh7751systemh_readl(unsigned long addr) +{ + return *(volatile unsigned long*)addr; +} + +void sh7751systemh_writeb(unsigned char b, unsigned long addr) +{ + *(volatile unsigned char*)addr = b; +} + +void sh7751systemh_writew(unsigned short b, unsigned long addr) +{ + *(volatile unsigned short*)addr = b; +} + +void sh7751systemh_writel(unsigned int b, unsigned long addr) +{ + *(volatile unsigned long*)addr = b; +} + + + +/* Map ISA bus address to the real address. Only for PCMCIA. */ + +/* ISA page descriptor. */ +static __u32 sh_isa_memmap[256]; + +#if 0 +static int +sh_isa_mmap(__u32 start, __u32 length, __u32 offset) +{ + int idx; + + if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000)) + return -1; + + idx = start >> 12; + sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff); + printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n", + start, length, offset, idx, sh_isa_memmap[idx]); + return 0; +} +#endif + +unsigned long +sh7751systemh_isa_port2addr(unsigned long offset) +{ + int idx; + + idx = (offset >> 12) & 0xff; + offset &= 0xfff; + return sh_isa_memmap[idx] + offset; +} diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/renesas/systemh/irq.c new file mode 100644 index 00000000000..5675a4134ee --- /dev/null +++ b/arch/sh/boards/renesas/systemh/irq.c @@ -0,0 +1,111 @@ +/* + * linux/arch/sh/boards/systemh/irq.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SystemH Support. + * + * Modified for 7751 SystemH by + * Jonathan Short. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <asm/io.h> +#include <asm/mach/7751systemh.h> +#include <asm/smc37c93x.h> + +/* address of external interrupt mask register + * address must be set prior to use these (maybe in init_XXX_irq()) + * XXX : is it better to use .config than specifying it in code? */ +static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004; +static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000; + +/* forward declaration */ +static unsigned int startup_systemh_irq(unsigned int irq); +static void shutdown_systemh_irq(unsigned int irq); +static void enable_systemh_irq(unsigned int irq); +static void disable_systemh_irq(unsigned int irq); +static void mask_and_ack_systemh(unsigned int); +static void end_systemh_irq(unsigned int irq); + +/* hw_interrupt_type */ +static struct hw_interrupt_type systemh_irq_type = { + " SystemH Register", + startup_systemh_irq, + shutdown_systemh_irq, + enable_systemh_irq, + disable_systemh_irq, + mask_and_ack_systemh, + end_systemh_irq +}; + +static unsigned int startup_systemh_irq(unsigned int irq) +{ + enable_systemh_irq(irq); + return 0; /* never anything pending */ +} + +static void shutdown_systemh_irq(unsigned int irq) +{ + disable_systemh_irq(irq); +} + +static void disable_systemh_irq(unsigned int irq) +{ + if (systemh_irq_mask_register) { + unsigned long flags; + unsigned long val, mask = 0x01 << 1; + + /* Clear the "irq"th bit in the mask and set it in the request */ + local_irq_save(flags); + + val = ctrl_inl((unsigned long)systemh_irq_mask_register); + val &= ~mask; + ctrl_outl(val, (unsigned long)systemh_irq_mask_register); + + val = ctrl_inl((unsigned long)systemh_irq_request_register); + val |= mask; + ctrl_outl(val, (unsigned long)systemh_irq_request_register); + + local_irq_restore(flags); + } +} + +static void enable_systemh_irq(unsigned int irq) +{ + if (systemh_irq_mask_register) { + unsigned long flags; + unsigned long val, mask = 0x01 << 1; + + /* Set "irq"th bit in the mask register */ + local_irq_save(flags); + val = ctrl_inl((unsigned long)systemh_irq_mask_register); + val |= mask; + ctrl_outl(val, (unsigned long)systemh_irq_mask_register); + local_irq_restore(flags); + } +} + +static void mask_and_ack_systemh(unsigned int irq) +{ + disable_systemh_irq(irq); +} + +static void end_systemh_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_systemh_irq(irq); +} + +void make_systemh_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &systemh_irq_type; + disable_systemh_irq(irq); +} + diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/renesas/systemh/setup.c new file mode 100644 index 00000000000..826fa3d7669 --- /dev/null +++ b/arch/sh/boards/renesas/systemh/setup.c @@ -0,0 +1,80 @@ +/* + * linux/arch/sh/boards/systemh/setup.c + * + * Copyright (C) 2000 Kazumoto Kojima + * Copyright (C) 2003 Paul Mundt + * + * Hitachi SystemH Support. + * + * Modified for 7751 SystemH by Jonathan Short. + * + * Rewritten for 2.6 by Paul Mundt. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <asm/mach/7751systemh.h> +#include <asm/mach/io.h> +#include <asm/machvec.h> + +extern void make_systemh_irq(unsigned int irq); + +const char *get_system_type(void) +{ + return "7751 SystemH"; +} + +/* + * Initialize IRQ setting + */ +void __init init_7751systemh_IRQ(void) +{ +/* make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); LAN */ +/* make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-4); */ + make_systemh_irq(0xb); /* Ethernet interrupt */ +} + +struct sh_machine_vector mv_7751systemh __initmv = { + .mv_nr_irqs = 72, + + .mv_inb = sh7751systemh_inb, + .mv_inw = sh7751systemh_inw, + .mv_inl = sh7751systemh_inl, + .mv_outb = sh7751systemh_outb, + .mv_outw = sh7751systemh_outw, + .mv_outl = sh7751systemh_outl, + + .mv_inb_p = sh7751systemh_inb_p, + .mv_inw_p = sh7751systemh_inw, + .mv_inl_p = sh7751systemh_inl, + .mv_outb_p = sh7751systemh_outb_p, + .mv_outw_p = sh7751systemh_outw, + .mv_outl_p = sh7751systemh_outl, + + .mv_insb = sh7751systemh_insb, + .mv_insw = sh7751systemh_insw, + .mv_insl = sh7751systemh_insl, + .mv_outsb = sh7751systemh_outsb, + .mv_outsw = sh7751systemh_outsw, + .mv_outsl = sh7751systemh_outsl, + + .mv_readb = sh7751systemh_readb, + .mv_readw = sh7751systemh_readw, + .mv_readl = sh7751systemh_readl, + .mv_writeb = sh7751systemh_writeb, + .mv_writew = sh7751systemh_writew, + .mv_writel = sh7751systemh_writel, + + .mv_isa_port2addr = sh7751systemh_isa_port2addr, + + .mv_init_irq = init_7751systemh_IRQ, +}; +ALIAS_MV(7751systemh) + +int __init platform_setup(void) +{ + return 0; +} + diff --git a/arch/sh/boards/saturn/Makefile b/arch/sh/boards/saturn/Makefile new file mode 100644 index 00000000000..75a3042e252 --- /dev/null +++ b/arch/sh/boards/saturn/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the Sega Saturn specific parts of the kernel +# + +obj-y := setup.o io.o irq.o + +obj-$(CONFIG_SMP) += smp.o + diff --git a/arch/sh/boards/saturn/io.c b/arch/sh/boards/saturn/io.c new file mode 100644 index 00000000000..c6e4f7f2e68 --- /dev/null +++ b/arch/sh/boards/saturn/io.c @@ -0,0 +1,26 @@ +/* + * arch/sh/boards/saturn/io.c + * + * I/O routines for the Sega Saturn. + * + * Copyright (C) 2002 Paul Mundt + * + * Released under the terms of the GNU GPL v2.0. + */ +#include <asm/saturn/io.h> +#include <asm/machvec.h> + +unsigned long saturn_isa_port2addr(unsigned long offset) +{ + return offset; +} + +void *saturn_ioremap(unsigned long offset, unsigned long size) +{ + return (void *)offset; +} + +void saturn_iounmap(void *addr) +{ +} + diff --git a/arch/sh/boards/saturn/irq.c b/arch/sh/boards/saturn/irq.c new file mode 100644 index 00000000000..15d1d3f0f78 --- /dev/null +++ b/arch/sh/boards/saturn/irq.c @@ -0,0 +1,118 @@ +/* + * arch/sh/boards/saturn/irq.c + * + * Copyright (C) 2002 Paul Mundt + * + * Released under the terms of the GNU GPL v2.0. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <asm/irq.h> +#include <asm/io.h> + +/* + * Interrupts map out as follows: + * + * Vector Name Mask + * + * 64 VBLANKIN 0x0001 + * 65 VBLANKOUT 0x0002 + * 66 HBLANKIN 0x0004 + * 67 TIMER0 0x0008 + * 68 TIMER1 0x0010 + * 69 DSPEND 0x0020 + * 70 SOUNDREQUEST 0x0040 + * 71 SYSTEMMANAGER 0x0080 + * 72 PAD 0x0100 + * 73 LEVEL2DMAEND 0x0200 + * 74 LEVEL1DMAEND 0x0400 + * 75 LEVEL0DMAEND 0x0800 + * 76 DMAILLEGAL 0x1000 + * 77 SRITEDRAWEND 0x2000 + * 78 ABUS 0x8000 + * + */ +#define SATURN_IRQ_MIN 64 /* VBLANKIN */ +#define SATURN_IRQ_MAX 78 /* ABUS */ + +#define SATURN_IRQ_MASK 0xbfff + +static inline u32 saturn_irq_mask(unsigned int irq_nr) +{ + u32 mask; + + mask = (1 << (irq_nr - SATURN_IRQ_MIN)); + mask <<= (irq_nr == SATURN_IRQ_MAX); + mask &= SATURN_IRQ_MASK; + + return mask; +} + +static inline void mask_saturn_irq(unsigned int irq_nr) +{ + u32 mask; + + mask = ctrl_inl(SATURN_IMR); + mask |= saturn_irq_mask(irq_nr); + ctrl_outl(mask, SATURN_IMR); +} + +static inline void unmask_saturn_irq(unsigned int irq_nr) +{ + u32 mask; + + mask = ctrl_inl(SATURN_IMR); + mask &= ~saturn_irq_mask(irq_nr); + ctrl_outl(mask, SATURN_IMR); +} + +static void disable_saturn_irq(unsigned int irq_nr) +{ + mask_saturn_irq(irq_nr); +} + +static void enable_saturn_irq(unsigned int irq_nr) +{ + unmask_saturn_irq(irq_nr); +} + +static void mask_and_ack_saturn_irq(unsigned int irq_nr) +{ + mask_saturn_irq(irq_nr); +} + +static void end_saturn_irq(unsigned int irq_nr) +{ + if (!(irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + unmask_saturn_irq(irq_nr); +} + +static unsigned int startup_saturn_irq(unsigned int irq_nr) +{ + unmask_saturn_irq(irq_nr); + + return 0; +} + +static void shutdown_saturn_irq(unsigned int irq_nr) +{ + mask_saturn_irq(irq_nr); +} + +static struct hw_interrupt_type saturn_int = { + .typename = "Saturn", + .enable = enable_saturn_irq, + .disable = disable_saturn_irq, + .ack = mask_and_ack_saturn_irq, + .end = end_saturn_irq, + .startup = startup_saturn_irq, + .shutdown = shutdown_saturn_irq, +}; + +int saturn_irq_demux(int irq_nr) +{ + /* FIXME */ + return irq_nr; +} + diff --git a/arch/sh/boards/saturn/setup.c b/arch/sh/boards/saturn/setup.c new file mode 100644 index 00000000000..bea6c572ad8 --- /dev/null +++ b/arch/sh/boards/saturn/setup.c @@ -0,0 +1,43 @@ +/* + * arch/sh/boards/saturn/setup.c + * + * Hardware support for the Sega Saturn. + * + * Copyright (c) 2002 Paul Mundt + * + * Released under the terms of the GNU GPL v2.0. + */ +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/io.h> +#include <asm/machvec.h> +#include <asm/mach/io.h> + +extern int saturn_irq_demux(int irq_nr); + +const char *get_system_type(void) +{ + return "Sega Saturn"; +} + +/* + * The Machine Vector + */ +struct sh_machine_vector mv_saturn __initmv = { + .mv_nr_irqs = 80, /* Fix this later */ + + .mv_isa_port2addr = saturn_isa_port2addr, + .mv_irq_demux = saturn_irq_demux, + + .mv_ioremap = saturn_ioremap, + .mv_iounmap = saturn_iounmap, +}; + +ALIAS_MV(saturn) + +int __init platform_setup(void) +{ + return 0; +} + diff --git a/arch/sh/boards/saturn/smp.c b/arch/sh/boards/saturn/smp.c new file mode 100644 index 00000000000..76460918c9c --- /dev/null +++ b/arch/sh/boards/saturn/smp.c @@ -0,0 +1,68 @@ +/* + * arch/sh/boards/saturn/smp.c + * + * SMP support for the Sega Saturn. + * + * Copyright (c) 2002 Paul Mundt + * + * Released under the terms of the GNU GPL v2.0. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/smp.h> + +#include <asm/saturn/smpc.h> + +extern void start_secondary(void); + +void __smp_send_ipi(unsigned int cpu, unsigned int action) +{ + /* Nothing here yet .. */ +} + +unsigned int __smp_probe_cpus(void) +{ + /* + * This is just a straightforward master/slave configuration, + * and probing isn't really supported.. + */ + return 2; +} + +/* + * We're only allowed to do byte-access to SMPC registers. In + * addition to which, we treat them as write-only, since + * reading from them will return undefined data. + */ +static inline void smpc_slave_stop(unsigned int cpu) +{ + smpc_barrier(); + ctrl_outb(1, SMPC_STATUS); + + ctrl_outb(SMPC_CMD_SSHOFF, SMPC_COMMAND); + smpc_barrier(); +} + +static inline void smpc_slave_start(unsigned int cpu) +{ + ctrl_outb(1, SMPC_STATUS); + ctrl_outb(SMPC_CMD_SSHON, SMPC_COMMAND); + + smpc_barrier(); +} + +void __smp_slave_init(unsigned int cpu) +{ + register unsigned long vbr; + void **entry; + + __asm__ __volatile__ ("stc vbr, %0\n\t" : "=r" (vbr)); + entry = (void **)(vbr + 0x310 + 0x94); + + smpc_slave_stop(cpu); + + *(void **)entry = (void *)start_secondary; + + smpc_slave_start(cpu); +} + diff --git a/arch/sh/boards/se/7300/Makefile b/arch/sh/boards/se/7300/Makefile new file mode 100644 index 00000000000..0fbd4f47815 --- /dev/null +++ b/arch/sh/boards/se/7300/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the 7300 SolutionEngine specific parts of the kernel +# + +obj-y := setup.o io.o irq.o + +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7300/io.c b/arch/sh/boards/se/7300/io.c new file mode 100644 index 00000000000..3c89def4648 --- /dev/null +++ b/arch/sh/boards/se/7300/io.c @@ -0,0 +1,265 @@ +/* + * arch/sh/boards/se/7300/io.c + * + * Copyright (C) 2003 YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp> + * Based on arch/sh/kernel/io_shmse.c + * + * I/O routine for SH-Mobile3 73180 SolutionEngine. + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <asm/mach/se7300.h> +#include <asm/io.h> + +#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) + +struct iop { + unsigned long start, end; + unsigned long base; + struct iop *(*check) (struct iop * p, unsigned long port); + unsigned char (*inb) (struct iop * p, unsigned long port); + unsigned short (*inw) (struct iop * p, unsigned long port); + void (*outb) (struct iop * p, unsigned char value, unsigned long port); + void (*outw) (struct iop * p, unsigned short value, unsigned long port); +}; + +struct iop * +simple_check(struct iop *p, unsigned long port) +{ + if ((p->start <= port) && (port <= p->end)) + return p; + else + badio(check, port); +} + +struct iop * +ide_check(struct iop *p, unsigned long port) +{ + if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7)) + return p; + return NULL; +} + +unsigned char +simple_inb(struct iop *p, unsigned long port) +{ + return *(unsigned char *) (p->base + port); +} + +unsigned short +simple_inw(struct iop *p, unsigned long port) +{ + return *(unsigned short *) (p->base + port); +} + +void +simple_outb(struct iop *p, unsigned char value, unsigned long port) +{ + *(unsigned char *) (p->base + port) = value; +} + +void +simple_outw(struct iop *p, unsigned short value, unsigned long port) +{ + *(unsigned short *) (p->base + port) = value; +} + +unsigned char +pcc_inb(struct iop *p, unsigned long port) +{ + unsigned long addr = p->base + port + 0x40000; + unsigned long v; + + if (port & 1) + addr += 0x00400000; + v = *(volatile unsigned char *) addr; + return v; +} + +void +pcc_outb(struct iop *p, unsigned char value, unsigned long port) +{ + unsigned long addr = p->base + port + 0x40000; + + if (port & 1) + addr += 0x00400000; + *(volatile unsigned char *) addr = value; +} + +unsigned char +bad_inb(struct iop *p, unsigned long port) +{ + badio(inb, port); +} + +void +bad_outb(struct iop *p, unsigned char value, unsigned long port) +{ + badio(inw, port); +} + +/* MSTLANEX01 LAN at 0xb400:0000 */ +static struct iop laniop = { + .start = 0x300, + .end = 0x30f, + .base = 0xb4000000, + .check = simple_check, + .inb = simple_inb, + .inw = simple_inw, + .outb = simple_outb, + .outw = simple_outw, +}; + +/* NE2000 pc card NIC */ +static struct iop neiop = { + .start = 0x280, + .end = 0x29f, + .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */ + .check = simple_check, + .inb = pcc_inb, + .inw = simple_inw, + .outb = pcc_outb, + .outw = simple_outw, +}; + +/* CF in CF slot */ +static struct iop cfiop = { + .base = 0xb0600000, + .check = ide_check, + .inb = pcc_inb, + .inw = simple_inw, + .outb = pcc_outb, + .outw = simple_outw, +}; + +static __inline__ struct iop * +port2iop(unsigned long port) +{ + if (0) ; +#if defined(CONFIG_SMC91111) + else if (laniop.check(&laniop, port)) + return &laniop; +#endif +#if defined(CONFIG_NE2000) + else if (neiop.check(&neiop, port)) + return &neiop; +#endif +#if defined(CONFIG_IDE) + else if (cfiop.check(&cfiop, port)) + return &cfiop; +#endif + else + return &neiop; /* fallback */ +} + +static inline void +delay(void) +{ + ctrl_inw(0xac000000); + ctrl_inw(0xac000000); +} + +unsigned char +sh7300se_inb(unsigned long port) +{ + struct iop *p = port2iop(port); + return (p->inb) (p, port); +} + +unsigned char +sh7300se_inb_p(unsigned long port) +{ + unsigned char v = sh7300se_inb(port); + delay(); + return v; +} + +unsigned short +sh7300se_inw(unsigned long port) +{ + struct iop *p = port2iop(port); + return (p->inw) (p, port); +} + +unsigned int +sh7300se_inl(unsigned long port) +{ + badio(inl, port); +} + +void +sh7300se_outb(unsigned char value, unsigned long port) +{ + struct iop *p = port2iop(port); + (p->outb) (p, value, port); +} + +void +sh7300se_outb_p(unsigned char value, unsigned long port) +{ + sh7300se_outb(value, port); + delay(); +} + +void +sh7300se_outw(unsigned short value, unsigned long port) +{ + struct iop *p = port2iop(port); + (p->outw) (p, value, port); +} + +void +sh7300se_outl(unsigned int value, unsigned long port) +{ + badio(outl, port); +} + +void +sh7300se_insb(unsigned long port, void *addr, unsigned long count) +{ + unsigned char *a = addr; + struct iop *p = port2iop(port); + while (count--) + *a++ = (p->inb) (p, port); +} + +void +sh7300se_insw(unsigned long port, void *addr, unsigned long count) +{ + unsigned short *a = addr; + struct iop *p = port2iop(port); + while (count--) + *a++ = (p->inw) (p, port); +} + +void +sh7300se_insl(unsigned long port, void *addr, unsigned long count) +{ + badio(insl, port); +} + +void +sh7300se_outsb(unsigned long port, const void *addr, unsigned long count) +{ + unsigned char *a = (unsigned char *) addr; + struct iop *p = port2iop(port); + while (count--) + (p->outb) (p, *a++, port); +} + +void +sh7300se_outsw(unsigned long port, const void *addr, unsigned long count) +{ + unsigned short *a = (unsigned short *) addr; + struct iop *p = port2iop(port); + while (count--) + (p->outw) (p, *a++, port); +} + +void +sh7300se_outsl(unsigned long port, const void *addr, unsigned long count) +{ + badio(outsw, port); +} diff --git a/arch/sh/boards/se/7300/irq.c b/arch/sh/boards/se/7300/irq.c new file mode 100644 index 00000000000..96c8c23d6c9 --- /dev/null +++ b/arch/sh/boards/se/7300/irq.c @@ -0,0 +1,37 @@ +/* + * linux/arch/sh/boards/se/7300/irq.c + * + * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> + * + * SH-Mobile SolutionEngine 7300 Support. + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/mach/se7300.h> + +/* + * Initialize IRQ setting + */ +void __init +init_7300se_IRQ(void) +{ + ctrl_outw(0x0028, PA_EPLD_MODESET); /* mode set IRQ0,1 active low. */ + ctrl_outw(0xa000, INTC_ICR1); /* IRQ mode; IRQ0,1 enable. */ + ctrl_outw(0x0000, PORT_PFCR); /* use F for IRQ[3:0] and SIU. */ + + /* PC_IRQ[0-3] -> IRQ0 (32) */ + make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, 0x0f - IRQ0_IRQ); + /* A_IRQ[0-3] -> IRQ1 (33) */ + make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, 0x0f - IRQ1_IRQ); + make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); + make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + + ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ +} diff --git a/arch/sh/boards/se/7300/led.c b/arch/sh/boards/se/7300/led.c new file mode 100644 index 00000000000..02c7f846c84 --- /dev/null +++ b/arch/sh/boards/se/7300/led.c @@ -0,0 +1,69 @@ +/* + * linux/arch/sh/boards/se/7300/led.c + * + * Derived from linux/arch/sh/boards/se/770x/led.c + * + * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains Solution Engine specific LED code. + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <asm/mach/se7300.h> + +static void +mach_led(int position, int value) +{ + volatile unsigned short *p = (volatile unsigned short *) PA_LED; + + if (value) { + *p |= (1 << 8); + } else { + *p &= ~(1 << 8); + } +} + + +/* Cycle the LED's in the clasic Knightrider/Sun pattern */ +void +heartbeat_7300se(void) +{ + static unsigned int cnt = 0, period = 0; + volatile unsigned short *p = (volatile unsigned short *) PA_LED; + static unsigned bit = 0, up = 1; + + cnt += 1; + if (cnt < period) { + return; + } + + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 + */ + period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); + + if (up) { + if (bit == 7) { + bit--; + up = 0; + } else { + bit++; + } + } else { + if (bit == 0) { + bit++; + up = 1; + } else { + bit--; + } + } + *p = 1 << (bit + 8); + +} + diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c new file mode 100644 index 00000000000..08536bc224d --- /dev/null +++ b/arch/sh/boards/se/7300/setup.c @@ -0,0 +1,66 @@ +/* + * linux/arch/sh/boards/se/7300/setup.c + * + * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> + * + * SH-Mobile SolutionEngine 7300 Support. + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <asm/machvec.h> +#include <asm/machvec_init.h> +#include <asm/mach/io.h> + +void heartbeat_7300se(void); +void init_7300se_IRQ(void); + +const char * +get_system_type(void) +{ + return "SolutionEngine 7300"; +} + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_7300se __initmv = { + .mv_nr_irqs = 109, + .mv_inb = sh7300se_inb, + .mv_inw = sh7300se_inw, + .mv_inl = sh7300se_inl, + .mv_outb = sh7300se_outb, + .mv_outw = sh7300se_outw, + .mv_outl = sh7300se_outl, + + .mv_inb_p = sh7300se_inb_p, + .mv_inw_p = sh7300se_inw, + .mv_inl_p = sh7300se_inl, + .mv_outb_p = sh7300se_outb_p, + .mv_outw_p = sh7300se_outw, + .mv_outl_p = sh7300se_outl, + + .mv_insb = sh7300se_insb, + .mv_insw = sh7300se_insw, + .mv_insl = sh7300se_insl, + .mv_outsb = sh7300se_outsb, + .mv_outsw = sh7300se_outsw, + .mv_outsl = sh7300se_outsl, + + .mv_init_irq = init_7300se_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_7300se, +#endif +}; + +ALIAS_MV(7300se) +/* + * Initialize the board + */ +void __init +platform_setup(void) +{ + +} diff --git a/arch/sh/boards/se/73180/Makefile b/arch/sh/boards/se/73180/Makefile new file mode 100644 index 00000000000..8f63886a0f3 --- /dev/null +++ b/arch/sh/boards/se/73180/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the 73180 SolutionEngine specific parts of the kernel +# + +obj-y := setup.o io.o irq.o + +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/73180/io.c b/arch/sh/boards/se/73180/io.c new file mode 100644 index 00000000000..73648cbe367 --- /dev/null +++ b/arch/sh/boards/se/73180/io.c @@ -0,0 +1,265 @@ +/* + * arch/sh/boards/se/73180/io.c + * + * Copyright (C) 2003 YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp> + * Based on arch/sh/boards/se/7300/io.c + * + * I/O routine for SH-Mobile3 73180 SolutionEngine. + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <asm/mach/se73180.h> +#include <asm/io.h> + +#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) + +struct iop { + unsigned long start, end; + unsigned long base; + struct iop *(*check) (struct iop * p, unsigned long port); + unsigned char (*inb) (struct iop * p, unsigned long port); + unsigned short (*inw) (struct iop * p, unsigned long port); + void (*outb) (struct iop * p, unsigned char value, unsigned long port); + void (*outw) (struct iop * p, unsigned short value, unsigned long port); +}; + +struct iop * +simple_check(struct iop *p, unsigned long port) +{ + if ((p->start <= port) && (port <= p->end)) + return p; + else + badio(check, port); +} + +struct iop * +ide_check(struct iop *p, unsigned long port) +{ + if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7)) + return p; + return NULL; +} + +unsigned char +simple_inb(struct iop *p, unsigned long port) +{ + return *(unsigned char *) (p->base + port); +} + +unsigned short +simple_inw(struct iop *p, unsigned long port) +{ + return *(unsigned short *) (p->base + port); +} + +void +simple_outb(struct iop *p, unsigned char value, unsigned long port) +{ + *(unsigned char *) (p->base + port) = value; +} + +void +simple_outw(struct iop *p, unsigned short value, unsigned long port) +{ + *(unsigned short *) (p->base + port) = value; +} + +unsigned char +pcc_inb(struct iop *p, unsigned long port) +{ + unsigned long addr = p->base + port + 0x40000; + unsigned long v; + + if (port & 1) + addr += 0x00400000; + v = *(volatile unsigned char *) addr; + return v; +} + +void +pcc_outb(struct iop *p, unsigned char value, unsigned long port) +{ + unsigned long addr = p->base + port + 0x40000; + + if (port & 1) + addr += 0x00400000; + *(volatile unsigned char *) addr = value; +} + +unsigned char +bad_inb(struct iop *p, unsigned long port) +{ + badio(inb, port); +} + +void +bad_outb(struct iop *p, unsigned char value, unsigned long port) +{ + badio(inw, port); +} + +/* MSTLANEX01 LAN at 0xb400:0000 */ +static struct iop laniop = { + .start = 0x300, + .end = 0x30f, + .base = 0xb4000000, + .check = simple_check, + .inb = simple_inb, + .inw = simple_inw, + .outb = simple_outb, + .outw = simple_outw, +}; + +/* NE2000 pc card NIC */ +static struct iop neiop = { + .start = 0x280, + .end = 0x29f, + .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */ + .check = simple_check, + .inb = pcc_inb, + .inw = simple_inw, + .outb = pcc_outb, + .outw = simple_outw, +}; + +/* CF in CF slot */ +static struct iop cfiop = { + .base = 0xb0600000, + .check = ide_check, + .inb = pcc_inb, + .inw = simple_inw, + .outb = pcc_outb, + .outw = simple_outw, +}; + +static __inline__ struct iop * +port2iop(unsigned long port) +{ + if (0) ; +#if defined(CONFIG_SMC91111) + else if (laniop.check(&laniop, port)) + return &laniop; +#endif +#if defined(CONFIG_NE2000) + else if (neiop.check(&neiop, port)) + return &neiop; +#endif +#if defined(CONFIG_IDE) + else if (cfiop.check(&cfiop, port)) + return &cfiop; +#endif + else + return &neiop; /* fallback */ +} + +static inline void +delay(void) +{ + ctrl_inw(0xac000000); + ctrl_inw(0xac000000); +} + +unsigned char +sh73180se_inb(unsigned long port) +{ + struct iop *p = port2iop(port); + return (p->inb) (p, port); +} + +unsigned char +sh73180se_inb_p(unsigned long port) +{ + unsigned char v = sh73180se_inb(port); + delay(); + return v; +} + +unsigned short +sh73180se_inw(unsigned long port) +{ + struct iop *p = port2iop(port); + return (p->inw) (p, port); +} + +unsigned int +sh73180se_inl(unsigned long port) +{ + badio(inl, port); +} + +void +sh73180se_outb(unsigned char value, unsigned long port) +{ + struct iop *p = port2iop(port); + (p->outb) (p, value, port); +} + +void +sh73180se_outb_p(unsigned char value, unsigned long port) +{ + sh73180se_outb(value, port); + delay(); +} + +void +sh73180se_outw(unsigned short value, unsigned long port) +{ + struct iop *p = port2iop(port); + (p->outw) (p, value, port); +} + +void +sh73180se_outl(unsigned int value, unsigned long port) +{ + badio(outl, port); +} + +void +sh73180se_insb(unsigned long port, void *addr, unsigned long count) +{ + unsigned char *a = addr; + struct iop *p = port2iop(port); + while (count--) + *a++ = (p->inb) (p, port); +} + +void +sh73180se_insw(unsigned long port, void *addr, unsigned long count) +{ + unsigned short *a = addr; + struct iop *p = port2iop(port); + while (count--) + *a++ = (p->inw) (p, port); +} + +void +sh73180se_insl(unsigned long port, void *addr, unsigned long count) +{ + badio(insl, port); +} + +void +sh73180se_outsb(unsigned long port, const void *addr, unsigned long count) +{ + unsigned char *a = (unsigned char *) addr; + struct iop *p = port2iop(port); + while (count--) + (p->outb) (p, *a++, port); +} + +void +sh73180se_outsw(unsigned long port, const void *addr, unsigned long count) +{ + unsigned short *a = (unsigned short *) addr; + struct iop *p = port2iop(port); + while (count--) + (p->outw) (p, *a++, port); +} + +void +sh73180se_outsl(unsigned long port, const void *addr, unsigned long count) +{ + badio(outsw, port); +} diff --git a/arch/sh/boards/se/73180/irq.c b/arch/sh/boards/se/73180/irq.c new file mode 100644 index 00000000000..70f04caad9a --- /dev/null +++ b/arch/sh/boards/se/73180/irq.c @@ -0,0 +1,137 @@ +/* + * arch/sh/boards/se/73180/irq.c + * + * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> + * Based on arch/sh/boards/se/7300/irq.c + * + * Modified for SH-Mobile SolutionEngine 73180 Support + * by YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp> + * + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/mach/se73180.h> + +static int +intreq2irq(int i) +{ + if (i == 5) + return 10; + return 32 + 7 - i; +} + +static int +irq2intreq(int irq) +{ + if (irq == 10) + return 5; + return 7 - (irq - 32); +} + +static void +disable_intreq_irq(unsigned int irq) +{ + ctrl_outb(1 << (7 - irq2intreq(irq)), INTMSK0); +} + +static void +enable_intreq_irq(unsigned int irq) +{ + ctrl_outb(1 << (7 - irq2intreq(irq)), INTMSKCLR0); +} + +static void +mask_and_ack_intreq_irq(unsigned int irq) +{ + disable_intreq_irq(irq); +} + +static unsigned int +startup_intreq_irq(unsigned int irq) +{ + enable_intreq_irq(irq); + return 0; +} + +static void +shutdown_intreq_irq(unsigned int irq) +{ + disable_intreq_irq(irq); +} + +static void +end_intreq_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + enable_intreq_irq(irq); +} + +static struct hw_interrupt_type intreq_irq_type = { + .typename = "intreq", + .startup = startup_intreq_irq, + .shutdown = shutdown_intreq_irq, + .enable = enable_intreq_irq, + .disable = disable_intreq_irq, + .ack = mask_and_ack_intreq_irq, + .end = end_intreq_irq +}; + +void +make_intreq_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &intreq_irq_type; + disable_intreq_irq(irq); +} + +int +shmse_irq_demux(int irq) +{ + if (irq == IRQ5_IRQ) + return 10; + return irq; +} + +/* + * Initialize IRQ setting + */ +void __init +init_73180se_IRQ(void) +{ + make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); + + ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ + ctrl_outw(0x2000, 0xb07fffec); /* mrshpc irq enable */ + ctrl_outl(3 << ((7 - 5) * 4), INTC_INTPRI0); /* irq5 pri=3 */ + ctrl_outw(2 << ((7 - 5) * 2), INTC_ICR1); /* low-level irq */ + make_intreq_irq(10); + + make_ipr_irq(VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8); + + ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ + + make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); + make_ipr_irq(IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); + make_ipr_irq(IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, + IIC0_PRIORITY); + make_ipr_irq(IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, + IIC0_PRIORITY); + make_ipr_irq(IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); + make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); + make_ipr_irq(SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY); + + /* VIO interrupt */ + make_ipr_irq(CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + make_ipr_irq(BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + make_ipr_irq(VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + + make_ipr_irq(LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY); + ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ +} diff --git a/arch/sh/boards/se/73180/led.c b/arch/sh/boards/se/73180/led.c new file mode 100644 index 00000000000..1e8f1cf3e10 --- /dev/null +++ b/arch/sh/boards/se/73180/led.c @@ -0,0 +1,67 @@ +/* + * arch/sh/boards/se/73180/led.c + * + * Derived from arch/sh/boards/se/770x/led.c + * + * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains Solution Engine specific LED code. + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <asm/mach/se73180.h> + +static void +mach_led(int position, int value) +{ + volatile unsigned short *p = (volatile unsigned short *) PA_LED; + + if (value) { + *p |= (1 << LED_SHIFT); + } else { + *p &= ~(1 << LED_SHIFT); + } +} + +/* Cycle the LED's in the clasic Knightrider/Sun pattern */ +void +heartbeat_73180se(void) +{ + static unsigned int cnt = 0, period = 0; + volatile unsigned short *p = (volatile unsigned short *) PA_LED; + static unsigned bit = 0, up = 1; + + cnt += 1; + if (cnt < period) { + return; + } + + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 + */ + period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); + + if (up) { + if (bit == 7) { + bit--; + up = 0; + } else { + bit++; + } + } else { + if (bit == 0) { + bit++; + up = 1; + } else { + bit--; + } + } + *p = 1 << (bit + LED_SHIFT); + +} diff --git a/arch/sh/boards/se/73180/setup.c b/arch/sh/boards/se/73180/setup.c new file mode 100644 index 00000000000..07fa90c38a0 --- /dev/null +++ b/arch/sh/boards/se/73180/setup.c @@ -0,0 +1,68 @@ +/* + * arch/sh/boards/se/73180/setup.c + * + * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> + * Based on arch/sh/setup_shmse.c + * + * Modified for 73180 SolutionEngine + * by YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp> + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <asm/machvec.h> +#include <asm/machvec_init.h> +#include <asm/mach/io.h> + +void heartbeat_73180se(void); +void init_73180se_IRQ(void); + +const char * +get_system_type(void) +{ + return "SolutionEngine 73180"; +} + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_73180se __initmv = { + .mv_nr_irqs = 108, + .mv_inb = sh73180se_inb, + .mv_inw = sh73180se_inw, + .mv_inl = sh73180se_inl, + .mv_outb = sh73180se_outb, + .mv_outw = sh73180se_outw, + .mv_outl = sh73180se_outl, + + .mv_inb_p = sh73180se_inb_p, + .mv_inw_p = sh73180se_inw, + .mv_inl_p = sh73180se_inl, + .mv_outb_p = sh73180se_outb_p, + .mv_outw_p = sh73180se_outw, + .mv_outl_p = sh73180se_outl, + + .mv_insb = sh73180se_insb, + .mv_insw = sh73180se_insw, + .mv_insl = sh73180se_insl, + .mv_outsb = sh73180se_outsb, + .mv_outsw = sh73180se_outsw, + .mv_outsl = sh73180se_outsl, + + .mv_init_irq = init_73180se_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_73180se, +#endif +}; + +ALIAS_MV(73180se) +/* + * Initialize the board + */ +void __init +platform_setup(void) +{ + +} diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/se/770x/Makefile new file mode 100644 index 00000000000..be89a73cc41 --- /dev/null +++ b/arch/sh/boards/se/770x/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the 770x SolutionEngine specific parts of the kernel +# + +obj-y := mach.o setup.o io.o irq.o led.o + diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c new file mode 100644 index 00000000000..9a39ee96314 --- /dev/null +++ b/arch/sh/boards/se/770x/io.c @@ -0,0 +1,226 @@ +/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $ + * + * linux/arch/sh/kernel/io_se.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * I/O routine for Hitachi SolutionEngine. + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/se/se.h> + +/* SH pcmcia io window base, start and end. */ +int sh_pcic_io_wbase = 0xb8400000; +int sh_pcic_io_start; +int sh_pcic_io_stop; +int sh_pcic_io_type; +int sh_pcic_io_dummy; + +static inline void delay(void) +{ + ctrl_inw(0xa0000000); +} + +/* MS7750 requires special versions of in*, out* routines, since + PC-like io ports are located at upper half byte of 16-bit word which + can be accessed only with 16-bit wide. */ + +static inline volatile __u16 * +port2adr(unsigned int port) +{ + if (port >= 0x2000) + return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); + else if (port >= 0x1000) + return (volatile __u16 *) (PA_83902 + (port << 1)); + else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) + return (volatile __u16 *) (sh_pcic_io_wbase + (port &~ 1)); + else + return (volatile __u16 *) (PA_SUPERIO + (port << 1)); +} + +static inline int +shifted_port(unsigned long port) +{ + /* For IDE registers, value is not shifted */ + if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) + return 0; + else + return 1; +} + +#define maybebadio(name,port) \ + printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ + #name, (port), (__u32) __builtin_return_address(0)) + +unsigned char se_inb(unsigned long port) +{ + if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) + return *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); + else if (shifted_port(port)) + return (*port2adr(port) >> 8); + else + return (*port2adr(port))&0xff; +} + +unsigned char se_inb_p(unsigned long port) +{ + unsigned long v; + + if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) + v = *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); + else if (shifted_port(port)) + v = (*port2adr(port) >> 8); + else + v = (*port2adr(port))&0xff; + delay(); + return v; +} + +unsigned short se_inw(unsigned long port) +{ + if (port >= 0x2000 || + (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) + return *port2adr(port); + else + maybebadio(inw, port); + return 0; +} + +unsigned int se_inl(unsigned long port) +{ + maybebadio(inl, port); + return 0; +} + +void se_outb(unsigned char value, unsigned long port) +{ + if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) + *(__u8 *)(sh_pcic_io_wbase + port) = value; + else if (shifted_port(port)) + *(port2adr(port)) = value << 8; + else + *(port2adr(port)) = value; +} + +void se_outb_p(unsigned char value, unsigned long port) +{ + if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) + *(__u8 *)(sh_pcic_io_wbase + port) = value; + else if (shifted_port(port)) + *(port2adr(port)) = value << 8; + else + *(port2adr(port)) = value; + delay(); +} + +void se_outw(unsigned short value, unsigned long port) +{ + if (port >= 0x2000 || + (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) + *port2adr(port) = value; + else + maybebadio(outw, port); +} + +void se_outl(unsigned int value, unsigned long port) +{ + maybebadio(outl, port); +} + +void se_insb(unsigned long port, void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + __u8 *ap = addr; + + if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) { + volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + 0x40000 + port); + while (count--) + *ap++ = *bp; + } else if (shifted_port(port)) { + while (count--) + *ap++ = *p >> 8; + } else { + while (count--) + *ap++ = *p; + } +} + +void se_insw(unsigned long port, void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + __u16 *ap = addr; + while (count--) + *ap++ = *p; +} + +void se_insl(unsigned long port, void *addr, unsigned long count) +{ + maybebadio(insl, port); +} + +void se_outsb(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + const __u8 *ap = addr; + + if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) { + volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + port); + while (count--) + *bp = *ap++; + } else if (shifted_port(port)) { + while (count--) + *p = *ap++ << 8; + } else { + while (count--) + *p = *ap++; + } +} + +void se_outsw(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + const __u16 *ap = addr; + while (count--) + *p = *ap++; +} + +void se_outsl(unsigned long port, const void *addr, unsigned long count) +{ + maybebadio(outsw, port); +} + +/* Map ISA bus address to the real address. Only for PCMCIA. */ + +/* ISA page descriptor. */ +static __u32 sh_isa_memmap[256]; + +static int +sh_isa_mmap(__u32 start, __u32 length, __u32 offset) +{ + int idx; + + if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000)) + return -1; + + idx = start >> 12; + sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff); +#if 0 + printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n", + start, length, offset, idx, sh_isa_memmap[idx]); +#endif + return 0; +} + +unsigned long +se_isa_port2addr(unsigned long offset) +{ + int idx; + + idx = (offset >> 12) & 0xff; + offset &= 0xfff; + return sh_isa_memmap[idx] + offset; +} diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c new file mode 100644 index 00000000000..210897b315f --- /dev/null +++ b/arch/sh/boards/se/770x/irq.c @@ -0,0 +1,80 @@ +/* + * linux/arch/sh/boards/se/770x/irq.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine Support. + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/se/se.h> + +/* + * Initialize IRQ setting + */ +void __init init_se_IRQ(void) +{ + /* + * Super I/O (Just mimic PC): + * 1: keyboard + * 3: serial 0 + * 4: serial 1 + * 5: printer + * 6: floppy + * 8: rtc + * 12: mouse + * 14: ide0 + */ +#if defined(CONFIG_CPU_SUBTYPE_SH7705) + /* Disable all interrupts */ + ctrl_outw(0, BCR_ILCRA); + ctrl_outw(0, BCR_ILCRB); + ctrl_outw(0, BCR_ILCRC); + ctrl_outw(0, BCR_ILCRD); + ctrl_outw(0, BCR_ILCRE); + ctrl_outw(0, BCR_ILCRF); + ctrl_outw(0, BCR_ILCRG); + /* This is default value */ + make_ipr_irq(0xf-0x2, BCR_ILCRA, 2, 0x2); + make_ipr_irq(0xf-0xa, BCR_ILCRA, 1, 0xa); + make_ipr_irq(0xf-0x5, BCR_ILCRB, 0, 0x5); + make_ipr_irq(0xf-0x8, BCR_ILCRC, 1, 0x8); + make_ipr_irq(0xf-0xc, BCR_ILCRC, 0, 0xc); + make_ipr_irq(0xf-0xe, BCR_ILCRD, 3, 0xe); + make_ipr_irq(0xf-0x3, BCR_ILCRD, 1, 0x3); /* LAN */ + make_ipr_irq(0xf-0xd, BCR_ILCRE, 2, 0xd); + make_ipr_irq(0xf-0x9, BCR_ILCRE, 1, 0x9); + make_ipr_irq(0xf-0x1, BCR_ILCRE, 0, 0x1); + make_ipr_irq(0xf-0xf, BCR_ILCRF, 3, 0xf); + make_ipr_irq(0xf-0xb, BCR_ILCRF, 1, 0xb); + make_ipr_irq(0xf-0x7, BCR_ILCRG, 3, 0x7); + make_ipr_irq(0xf-0x6, BCR_ILCRG, 2, 0x6); + make_ipr_irq(0xf-0x4, BCR_ILCRG, 1, 0x4); +#else + make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-14); + make_ipr_irq(12, BCR_ILCRA, 1, 0x0f-12); + make_ipr_irq( 8, BCR_ILCRB, 1, 0x0f- 8); + make_ipr_irq( 6, BCR_ILCRC, 3, 0x0f- 6); + make_ipr_irq( 5, BCR_ILCRC, 2, 0x0f- 5); + make_ipr_irq( 4, BCR_ILCRC, 1, 0x0f- 4); + make_ipr_irq( 3, BCR_ILCRC, 0, 0x0f- 3); + make_ipr_irq( 1, BCR_ILCRD, 3, 0x0f- 1); + + make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); /* LAN */ + + make_ipr_irq( 0, BCR_ILCRE, 3, 0x0f- 0); /* PCIRQ3 */ + make_ipr_irq(11, BCR_ILCRE, 2, 0x0f-11); /* PCIRQ2 */ + make_ipr_irq( 9, BCR_ILCRE, 1, 0x0f- 9); /* PCIRQ1 */ + make_ipr_irq( 7, BCR_ILCRE, 0, 0x0f- 7); /* PCIRQ0 */ + + /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ + /* NOTE: #2 and #13 are not used on PC */ + make_ipr_irq(13, BCR_ILCRG, 1, 0x0f-13); /* SLOTIRQ2 */ + make_ipr_irq( 2, BCR_ILCRG, 0, 0x0f- 2); /* SLOTIRQ1 */ +#endif +} diff --git a/arch/sh/boards/se/770x/led.c b/arch/sh/boards/se/770x/led.c new file mode 100644 index 00000000000..5c64e8ab2cf --- /dev/null +++ b/arch/sh/boards/se/770x/led.c @@ -0,0 +1,68 @@ +/* + * linux/arch/sh/kernel/led_se.c + * + * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains Solution Engine specific LED code. + */ + +#include <linux/config.h> +#include <asm/se/se.h> + +static void mach_led(int position, int value) +{ + volatile unsigned short* p = (volatile unsigned short*)PA_LED; + + if (value) { + *p |= (1<<8); + } else { + *p &= ~(1<<8); + } +} + +#ifdef CONFIG_HEARTBEAT + +#include <linux/sched.h> + +/* Cycle the LED's in the clasic Knightrider/Sun pattern */ +void heartbeat_se(void) +{ + static unsigned int cnt = 0, period = 0; + volatile unsigned short* p = (volatile unsigned short*)PA_LED; + static unsigned bit = 0, up = 1; + + cnt += 1; + if (cnt < period) { + return; + } + + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 + */ + period = 110 - ( (300<<FSHIFT)/ + ((avenrun[0]/5) + (3<<FSHIFT)) ); + + if (up) { + if (bit == 7) { + bit--; + up=0; + } else { + bit ++; + } + } else { + if (bit == 0) { + bit++; + up=1; + } else { + bit--; + } + } + *p = 1<<(bit+8); + +} +#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/se/770x/mach.c b/arch/sh/boards/se/770x/mach.c new file mode 100644 index 00000000000..f9b4c56cc47 --- /dev/null +++ b/arch/sh/boards/se/770x/mach.c @@ -0,0 +1,68 @@ +/* + * linux/arch/sh/kernel/mach_se.c + * + * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Machine vector for the Hitachi SolutionEngine + */ + +#include <linux/config.h> +#include <linux/init.h> + +#include <asm/machvec.h> +#include <asm/rtc.h> +#include <asm/machvec_init.h> + +#include <asm/se/io.h> + +void heartbeat_se(void); +void setup_se(void); +void init_se_IRQ(void); + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_se __initmv = { +#if defined(CONFIG_CPU_SH4) + .mv_nr_irqs = 48, +#elif defined(CONFIG_CPU_SUBTYPE_SH7708) + .mv_nr_irqs = 32, +#elif defined(CONFIG_CPU_SUBTYPE_SH7709) + .mv_nr_irqs = 61, +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) + .mv_nr_irqs = 86, +#endif + + .mv_inb = se_inb, + .mv_inw = se_inw, + .mv_inl = se_inl, + .mv_outb = se_outb, + .mv_outw = se_outw, + .mv_outl = se_outl, + + .mv_inb_p = se_inb_p, + .mv_inw_p = se_inw, + .mv_inl_p = se_inl, + .mv_outb_p = se_outb_p, + .mv_outw_p = se_outw, + .mv_outl_p = se_outl, + + .mv_insb = se_insb, + .mv_insw = se_insw, + .mv_insl = se_insl, + .mv_outsb = se_outsb, + .mv_outsw = se_outsw, + .mv_outsl = se_outsl, + + .mv_isa_port2addr = se_isa_port2addr, + + .mv_init_irq = init_se_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_se, +#endif +}; +ALIAS_MV(se) diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c new file mode 100644 index 00000000000..2bed46fb607 --- /dev/null +++ b/arch/sh/boards/se/770x/setup.c @@ -0,0 +1,85 @@ +/* $Id: setup.c,v 1.1.2.4 2002/03/02 21:57:07 lethal Exp $ + * + * linux/arch/sh/boards/se/770x/setup.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine Support. + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <asm/io.h> +#include <asm/se/se.h> +#include <asm/se/smc37c93x.h> + +/* + * Configure the Super I/O chip + */ +static void __init smsc_config(int index, int data) +{ + outb_p(index, INDEX_PORT); + outb_p(data, DATA_PORT); +} + +static void __init init_smsc(void) +{ + outb_p(CONFIG_ENTER, CONFIG_PORT); + outb_p(CONFIG_ENTER, CONFIG_PORT); + + /* FDC */ + smsc_config(CURRENT_LDN_INDEX, LDN_FDC); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */ + + /* IDE1 */ + smsc_config(CURRENT_LDN_INDEX, LDN_IDE1); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */ + + /* AUXIO (GPIO): to use IDE1 */ + smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO); + smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */ + smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */ + + /* COM1 */ + smsc_config(CURRENT_LDN_INDEX, LDN_COM1); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IO_BASE_HI_INDEX, 0x03); + smsc_config(IO_BASE_LO_INDEX, 0xf8); + smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */ + + /* COM2 */ + smsc_config(CURRENT_LDN_INDEX, LDN_COM2); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IO_BASE_HI_INDEX, 0x02); + smsc_config(IO_BASE_LO_INDEX, 0xf8); + smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */ + + /* RTC */ + smsc_config(CURRENT_LDN_INDEX, LDN_RTC); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */ + + /* XXX: PARPORT, KBD, and MOUSE will come here... */ + outb_p(CONFIG_EXIT, CONFIG_PORT); +} + +const char *get_system_type(void) +{ + return "SolutionEngine"; +} + +/* + * Initialize the board + */ +void __init platform_setup(void) +{ + init_smsc(); + /* XXX: RTC setting comes here */ +} diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/se/7751/Makefile new file mode 100644 index 00000000000..ce7ca247f84 --- /dev/null +++ b/arch/sh/boards/se/7751/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the 7751 SolutionEngine specific parts of the kernel +# + +obj-y := mach.o setup.o io.o irq.o led.o + +obj-$(CONFIG_PCI) += pci.o + diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c new file mode 100644 index 00000000000..99041b26926 --- /dev/null +++ b/arch/sh/boards/se/7751/io.c @@ -0,0 +1,244 @@ +/* + * linux/arch/sh/kernel/io_7751se.c + * + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routine for Hitachi 7751 SolutionEngine. + * + * Initial version only to support LAN access; some + * placeholder code from io_se.c left in with the + * expectation of later SuperIO and PCMCIA access. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/se7751/se7751.h> +#include <asm/addrspace.h> + +#include <linux/pci.h> +#include "../../../drivers/pci/pci-sh7751.h" + +#if 0 +/****************************************************************** + * Variables from io_se.c, related to PCMCIA (not PCI); we're not + * compiling them in, and have removed references from functions + * which follow. [Many checked for IO ports in the range bounded + * by sh_pcic_io_start/stop, and used sh_pcic_io_wbase as offset. + * As start/stop are uninitialized, only port 0x0 would match?] + * When used, remember to adjust names to avoid clash with io_se? + *****************************************************************/ +/* SH pcmcia io window base, start and end. */ +int sh_pcic_io_wbase = 0xb8400000; +int sh_pcic_io_start; +int sh_pcic_io_stop; +int sh_pcic_io_type; +int sh_pcic_io_dummy; +/*************************************************************/ +#endif + +/* + * The 7751 Solution Engine uses the built-in PCI controller (PCIC) + * of the 7751 processor, and has a SuperIO accessible via the PCI. + * The board also includes a PCMCIA controller on its memory bus, + * like the other Solution Engine boards. + */ + +#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) +#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) +#define PCI_IO_AREA SH7751_PCI_IO_BASE +#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE + +#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) + +#define maybebadio(name,port) \ + printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ + #name, (port), (__u32) __builtin_return_address(0)) + +static inline void delay(void) +{ + ctrl_inw(0xa0000000); +} + +static inline volatile __u16 * +port2adr(unsigned int port) +{ + if (port >= 0x2000) + return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); +#if 0 + else + return (volatile __u16 *) (PA_SUPERIO + (port << 1)); +#endif + maybebadio(name,(unsigned long)port); + return (volatile __u16*)port; +} + +#if 0 +/* The 7751 Solution Engine seems to have everything hooked */ +/* up pretty normally (nothing on high-bytes only...) so this */ +/* shouldn't be needed */ +static inline int +shifted_port(unsigned long port) +{ + /* For IDE registers, value is not shifted */ + if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) + return 0; + else + return 1; +} +#endif + +/* In case someone configures the kernel w/o PCI support: in that */ +/* scenario, don't ever bother to check for PCI-window addresses */ + +/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ +#if defined(CONFIG_PCI) +#define CHECK_SH7751_PCIIO(port) \ + ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) +#else +#define CHECK_SH7751_PCIIO(port) (0) +#endif + +/* + * General outline: remap really low stuff [eventually] to SuperIO, + * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) + * is mapped through the PCI IO window. Stuff with high bits (PXSEG) + * should be way beyond the window, and is used w/o translation for + * compatibility. + */ +unsigned char sh7751se_inb(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned char *)port; + else if (CHECK_SH7751_PCIIO(port)) + return *(volatile unsigned char *)PCI_IOMAP(port); + else + return (*port2adr(port))&0xff; +} + +unsigned char sh7751se_inb_p(unsigned long port) +{ + unsigned char v; + + if (PXSEG(port)) + v = *(volatile unsigned char *)port; + else if (CHECK_SH7751_PCIIO(port)) + v = *(volatile unsigned char *)PCI_IOMAP(port); + else + v = (*port2adr(port))&0xff; + delay(); + return v; +} + +unsigned short sh7751se_inw(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned short *)port; + else if (CHECK_SH7751_PCIIO(port)) + return *(volatile unsigned short *)PCI_IOMAP(port); + else if (port >= 0x2000) + return *port2adr(port); + else + maybebadio(inw, port); + return 0; +} + +unsigned int sh7751se_inl(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned long *)port; + else if (CHECK_SH7751_PCIIO(port)) + return *(volatile unsigned int *)PCI_IOMAP(port); + else if (port >= 0x2000) + return *port2adr(port); + else + maybebadio(inl, port); + return 0; +} + +void sh7751se_outb(unsigned char value, unsigned long port) +{ + + if (PXSEG(port)) + *(volatile unsigned char *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned char*)PCI_IOMAP(port)) = value; + else + *(port2adr(port)) = value; +} + +void sh7751se_outb_p(unsigned char value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned char *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned char*)PCI_IOMAP(port)) = value; + else + *(port2adr(port)) = value; + delay(); +} + +void sh7751se_outw(unsigned short value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned short *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned short *)PCI_IOMAP(port)) = value; + else if (port >= 0x2000) + *port2adr(port) = value; + else + maybebadio(outw, port); +} + +void sh7751se_outl(unsigned int value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned long *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned long*)PCI_IOMAP(port)) = value; + else + maybebadio(outl, port); +} + +void sh7751se_insl(unsigned long port, void *addr, unsigned long count) +{ + maybebadio(insl, port); +} + +void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count) +{ + maybebadio(outsw, port); +} + +/* Map ISA bus address to the real address. Only for PCMCIA. */ + +/* ISA page descriptor. */ +static __u32 sh_isa_memmap[256]; + +#if 0 +static int +sh_isa_mmap(__u32 start, __u32 length, __u32 offset) +{ + int idx; + + if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000)) + return -1; + + idx = start >> 12; + sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff); + printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n", + start, length, offset, idx, sh_isa_memmap[idx]); + return 0; +} +#endif + +unsigned long +sh7751se_isa_port2addr(unsigned long offset) +{ + int idx; + + idx = (offset >> 12) & 0xff; + offset &= 0xfff; + return sh_isa_memmap[idx] + offset; +} diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c new file mode 100644 index 00000000000..ad71f3e66c1 --- /dev/null +++ b/arch/sh/boards/se/7751/irq.c @@ -0,0 +1,67 @@ +/* + * linux/arch/sh/boards/se/7751/irq.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine Support. + * + * Modified for 7751 Solution Engine by + * Ian da Silva and Jeremy Siegel, 2001. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/irq.h> +#include <asm/se7751/se7751.h> + +/* + * Initialize IRQ setting + */ +void __init init_7751se_IRQ(void) +{ + + /* Leave old Solution Engine code in for reference. */ +#if defined(CONFIG_SH_SOLUTION_ENGINE) + /* + * Super I/O (Just mimic PC): + * 1: keyboard + * 3: serial 0 + * 4: serial 1 + * 5: printer + * 6: floppy + * 8: rtc + * 12: mouse + * 14: ide0 + */ + make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-14); + make_ipr_irq(12, BCR_ILCRA, 1, 0x0f-12); + make_ipr_irq( 8, BCR_ILCRB, 1, 0x0f- 8); + make_ipr_irq( 6, BCR_ILCRC, 3, 0x0f- 6); + make_ipr_irq( 5, BCR_ILCRC, 2, 0x0f- 5); + make_ipr_irq( 4, BCR_ILCRC, 1, 0x0f- 4); + make_ipr_irq( 3, BCR_ILCRC, 0, 0x0f- 3); + make_ipr_irq( 1, BCR_ILCRD, 3, 0x0f- 1); + + make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); /* LAN */ + + make_ipr_irq( 0, BCR_ILCRE, 3, 0x0f- 0); /* PCIRQ3 */ + make_ipr_irq(11, BCR_ILCRE, 2, 0x0f-11); /* PCIRQ2 */ + make_ipr_irq( 9, BCR_ILCRE, 1, 0x0f- 9); /* PCIRQ1 */ + make_ipr_irq( 7, BCR_ILCRE, 0, 0x0f- 7); /* PCIRQ0 */ + + /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ + /* NOTE: #2 and #13 are not used on PC */ + make_ipr_irq(13, BCR_ILCRG, 1, 0x0f-13); /* SLOTIRQ2 */ + make_ipr_irq( 2, BCR_ILCRG, 0, 0x0f- 2); /* SLOTIRQ1 */ + +#elif defined(CONFIG_SH_7751_SOLUTION_ENGINE) + + make_ipr_irq(13, BCR_ILCRD, 3, 2); + + /* Add additional calls to make_ipr_irq() as drivers are added + * and tested. + */ +#endif + +} diff --git a/arch/sh/boards/se/7751/led.c b/arch/sh/boards/se/7751/led.c new file mode 100644 index 00000000000..0c788230cf8 --- /dev/null +++ b/arch/sh/boards/se/7751/led.c @@ -0,0 +1,68 @@ +/* + * linux/arch/sh/kernel/led_se.c + * + * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains Solution Engine specific LED code. + */ + +#include <linux/config.h> +#include <asm/se7751/se7751.h> + +static void mach_led(int position, int value) +{ + volatile unsigned short* p = (volatile unsigned short*)PA_LED; + + if (value) { + *p |= (1<<8); + } else { + *p &= ~(1<<8); + } +} + +#ifdef CONFIG_HEARTBEAT + +#include <linux/sched.h> + +/* Cycle the LED's in the clasic Knightrider/Sun pattern */ +void heartbeat_7751se(void) +{ + static unsigned int cnt = 0, period = 0; + volatile unsigned short* p = (volatile unsigned short*)PA_LED; + static unsigned bit = 0, up = 1; + + cnt += 1; + if (cnt < period) { + return; + } + + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 + */ + period = 110 - ( (300<<FSHIFT)/ + ((avenrun[0]/5) + (3<<FSHIFT)) ); + + if (up) { + if (bit == 7) { + bit--; + up=0; + } else { + bit ++; + } + } else { + if (bit == 0) { + bit++; + up=1; + } else { + bit--; + } + } + *p = 1<<(bit+8); + +} +#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/se/7751/mach.c b/arch/sh/boards/se/7751/mach.c new file mode 100644 index 00000000000..16d386b7e3b --- /dev/null +++ b/arch/sh/boards/se/7751/mach.c @@ -0,0 +1,55 @@ +/* + * linux/arch/sh/kernel/mach_7751se.c + * + * Minor tweak of mach_se.c file to reference 7751se-specific items. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Machine vector for the Hitachi 7751 SolutionEngine + */ + +#include <linux/config.h> +#include <linux/init.h> + +#include <asm/machvec.h> +#include <asm/rtc.h> +#include <asm/machvec_init.h> + +#include <asm/se7751/io.h> + +void heartbeat_7751se(void); +void init_7751se_IRQ(void); + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_7751se __initmv = { + .mv_nr_irqs = 72, + + .mv_inb = sh7751se_inb, + .mv_inw = sh7751se_inw, + .mv_inl = sh7751se_inl, + .mv_outb = sh7751se_outb, + .mv_outw = sh7751se_outw, + .mv_outl = sh7751se_outl, + + .mv_inb_p = sh7751se_inb_p, + .mv_inw_p = sh7751se_inw, + .mv_inl_p = sh7751se_inl, + .mv_outb_p = sh7751se_outb_p, + .mv_outw_p = sh7751se_outw, + .mv_outl_p = sh7751se_outl, + + .mv_insl = sh7751se_insl, + .mv_outsl = sh7751se_outsl, + + .mv_isa_port2addr = sh7751se_isa_port2addr, + + .mv_init_irq = init_7751se_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_7751se, +#endif +}; +ALIAS_MV(7751se) diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/se/7751/pci.c new file mode 100644 index 00000000000..1f273efd2cf --- /dev/null +++ b/arch/sh/boards/se/7751/pci.c @@ -0,0 +1,148 @@ +/* + * linux/arch/sh/kernel/pci-7751se.c + * + * Author: Ian DaSilva (idasilva@mvista.com) + * + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the Hitachi SH7751 Solution Engine board (MS7751SE01) + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> + +#include <asm/io.h> +#include "../../../drivers/pci/pci-sh7751.h" + +#define PCIMCR_MRSET_OFF 0xBFFFFFFF +#define PCIMCR_RFSH_OFF 0xFFFFFFFB + +/* + * Only long word accesses of the PCIC's internal local registers and the + * configuration registers from the CPU is supported. + */ +#define PCIC_WRITE(x,v) writel((v), PCI_REG(x)) +#define PCIC_READ(x) readl(PCI_REG(x)) + +/* + * Description: This function sets up and initializes the pcic, sets + * up the BARS, maps the DRAM into the address space etc, etc. + */ +int __init pcibios_init_platform(void) +{ + unsigned long bcr1, wcr1, wcr2, wcr3, mcr; + unsigned short bcr2; + + /* + * Initialize the slave bus controller on the pcic. The values used + * here should not be hardcoded, but they should be taken from the bsc + * on the processor, to make this function as generic as possible. + * (i.e. Another sbc may usr different SDRAM timing settings -- in order + * for the pcic to work, its settings need to be exactly the same.) + */ + bcr1 = (*(volatile unsigned long*)(SH7751_BCR1)); + bcr2 = (*(volatile unsigned short*)(SH7751_BCR2)); + wcr1 = (*(volatile unsigned long*)(SH7751_WCR1)); + wcr2 = (*(volatile unsigned long*)(SH7751_WCR2)); + wcr3 = (*(volatile unsigned long*)(SH7751_WCR3)); + mcr = (*(volatile unsigned long*)(SH7751_MCR)); + + bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */ + (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1; + + bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ + PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */ + PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */ + PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */ + PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */ + PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */ + mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; + PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */ + + + /* Enable all interrupts, so we know what to fix */ + PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff); + PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f); + + /* Set up standard PCI config registers */ + PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */ + PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */ + PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */ + PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */ + PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */ + PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */ + PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */ + PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */ + PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */ + PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */ + + /* Now turn it on... */ + PCIC_WRITE(SH7751_PCICR, 0xa5000001); + + /* + * Set PCIMBR and PCIIOBR here, assuming a single window + * (16M MEM, 256K IO) is enough. If a larger space is + * needed, the readx/writex and inx/outx functions will + * have to do more (e.g. setting registers for each call). + */ + + /* + * Set the MBR so PCI address is one-to-one with window, + * meaning all calls go straight through... use BUG_ON to + * catch erroneous assumption. + */ + BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE); + + PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM); + + /* Set IOBR for window containing area specified in pci.h */ + PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK)); + + /* All done, may as well say so... */ + printk("SH7751 PCI: Finished initialization of the PCI controller\n"); + + return 1; +} + +int __init pcibios_map_platform_irq(u8 slot, u8 pin) +{ + switch (slot) { + case 0: return 13; + case 1: return 13; /* AMD Ethernet controller */ + case 2: return -1; + case 3: return -1; + case 4: return -1; + default: + printk("PCI: Bad IRQ mapping request for slot %d\n", slot); + return -1; + } +} + +static struct resource sh7751_io_resource = { + .name = "SH7751 IO", + .start = SH7751_PCI_IO_BASE, + .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7751_mem_resource = { + .name = "SH7751 mem", + .start = SH7751_PCI_MEMORY_BASE, + .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +extern struct pci_ops sh7751_pci_ops; + +struct pci_channel board_pci_channels[] = { + { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; + diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c new file mode 100644 index 00000000000..9d111bb884f --- /dev/null +++ b/arch/sh/boards/se/7751/setup.c @@ -0,0 +1,228 @@ +/* + * linux/arch/sh/kernel/setup_7751se.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine Support. + * + * Modified for 7751 Solution Engine by + * Ian da Silva and Jeremy Siegel, 2001. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <asm/io.h> +#include <asm/se7751/se7751.h> + +#ifdef CONFIG_SH_KGDB +#include <asm/kgdb.h> +#endif + +/* + * Configure the Super I/O chip + */ +#if 0 +/* Leftover code from regular Solution Engine, for reference. */ +/* The SH7751 Solution Engine has a different SuperIO. */ +static void __init smsc_config(int index, int data) +{ + outb_p(index, INDEX_PORT); + outb_p(data, DATA_PORT); +} + +static void __init init_smsc(void) +{ + outb_p(CONFIG_ENTER, CONFIG_PORT); + outb_p(CONFIG_ENTER, CONFIG_PORT); + + /* FDC */ + smsc_config(CURRENT_LDN_INDEX, LDN_FDC); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */ + + /* IDE1 */ + smsc_config(CURRENT_LDN_INDEX, LDN_IDE1); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */ + + /* AUXIO (GPIO): to use IDE1 */ + smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO); + smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */ + smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */ + + /* COM1 */ + smsc_config(CURRENT_LDN_INDEX, LDN_COM1); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IO_BASE_HI_INDEX, 0x03); + smsc_config(IO_BASE_LO_INDEX, 0xf8); + smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */ + + /* COM2 */ + smsc_config(CURRENT_LDN_INDEX, LDN_COM2); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IO_BASE_HI_INDEX, 0x02); + smsc_config(IO_BASE_LO_INDEX, 0xf8); + smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */ + + /* RTC */ + smsc_config(CURRENT_LDN_INDEX, LDN_RTC); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */ + + /* XXX: PARPORT, KBD, and MOUSE will come here... */ + outb_p(CONFIG_EXIT, CONFIG_PORT); +} +#endif + +const char *get_system_type(void) +{ + return "7751 SolutionEngine"; +} + +#ifdef CONFIG_SH_KGDB +static int kgdb_uart_setup(void); +static struct kgdb_sermap kgdb_uart_sermap = +{ "ttyS", 0, kgdb_uart_setup, NULL }; +#endif + +/* + * Initialize the board + */ +void __init platform_setup(void) +{ + /* Call init_smsc() replacement to set up SuperIO. */ + /* XXX: RTC setting comes here */ +#ifdef CONFIG_SH_KGDB + kgdb_register_sermap(&kgdb_uart_sermap); +#endif +} + +/********************************************************************* + * Currently a hack (e.g. does not interact well w/serial.c, lots of * + * hardcoded stuff) but may be useful if SCI/F needs debugging. * + * Mostly copied from x86 code (see files asm-i386/kgdb_local.h and * + * arch/i386/lib/kgdb_serial.c). * + *********************************************************************/ + +#ifdef CONFIG_SH_KGDB +#include <linux/types.h> +#include <linux/serial.h> +#include <linux/serialP.h> +#include <linux/serial_reg.h> + +#define COM1_PORT 0x3f8 /* Base I/O address */ +#define COM1_IRQ 4 /* IRQ not used yet */ +#define COM2_PORT 0x2f8 /* Base I/O address */ +#define COM2_IRQ 3 /* IRQ not used yet */ + +#define SB_CLOCK 1843200 /* Serial baud clock */ +#define SB_BASE (SB_CLOCK/16) +#define SB_MCR UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS + +struct uart_port { + int base; +}; +#define UART_NPORTS 2 +struct uart_port uart_ports[] = { + { COM1_PORT }, + { COM2_PORT }, +}; +struct uart_port *kgdb_uart_port; + +#define UART_IN(reg) inb_p(kgdb_uart_port->base + reg) +#define UART_OUT(reg,v) outb_p((v), kgdb_uart_port->base + reg) + +/* Basic read/write functions for the UART */ +#define UART_LSR_RXCERR (UART_LSR_BI | UART_LSR_FE | UART_LSR_PE) +static int kgdb_uart_getchar(void) +{ + int lsr; + int c = -1; + + while (c == -1) { + lsr = UART_IN(UART_LSR); + if (lsr & UART_LSR_DR) + c = UART_IN(UART_RX); + if ((lsr & UART_LSR_RXCERR)) + c = -1; + } + return c; +} + +static void kgdb_uart_putchar(int c) +{ + while ((UART_IN(UART_LSR) & UART_LSR_THRE) == 0) + ; + UART_OUT(UART_TX, c); +} + +/* + * Initialize UART to configured/requested values. + * (But we don't interrupts yet, or interact w/serial.c) + */ +static int kgdb_uart_setup(void) +{ + int port; + int lcr = 0; + int bdiv = 0; + + if (kgdb_portnum >= UART_NPORTS) { + KGDB_PRINTK("uart port %d invalid.\n", kgdb_portnum); + return -1; + } + + kgdb_uart_port = &uart_ports[kgdb_portnum]; + + /* Init sequence from gdb_hook_interrupt */ + UART_IN(UART_RX); + UART_OUT(UART_IER, 0); + + UART_IN(UART_RX); /* Serial driver comments say */ + UART_IN(UART_IIR); /* this clears interrupt regs */ + UART_IN(UART_MSR); + + /* Figure basic LCR values */ + switch (kgdb_bits) { + case '7': + lcr |= UART_LCR_WLEN7; + break; + default: case '8': + lcr |= UART_LCR_WLEN8; + break; + } + switch (kgdb_parity) { + case 'O': + lcr |= UART_LCR_PARITY; + break; + case 'E': + lcr |= (UART_LCR_PARITY | UART_LCR_EPAR); + break; + default: break; + } + + /* Figure the baud rate divisor */ + bdiv = (SB_BASE/kgdb_baud); + + /* Set the baud rate and LCR values */ + UART_OUT(UART_LCR, (lcr | UART_LCR_DLAB)); + UART_OUT(UART_DLL, (bdiv & 0xff)); + UART_OUT(UART_DLM, ((bdiv >> 8) & 0xff)); + UART_OUT(UART_LCR, lcr); + + /* Set the MCR */ + UART_OUT(UART_MCR, SB_MCR); + + /* Turn off FIFOs for now */ + UART_OUT(UART_FCR, 0); + + /* Setup complete: initialize function pointers */ + kgdb_getchar = kgdb_uart_getchar; + kgdb_putchar = kgdb_uart_putchar; + + return 0; +} +#endif /* CONFIG_SH_KGDB */ diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/sh03/Makefile new file mode 100644 index 00000000000..321be50e36a --- /dev/null +++ b/arch/sh/boards/sh03/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Interface (CTP/PCI-SH03) specific parts of the kernel +# + +obj-y := setup.o rtc.o +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/sh03/led.c b/arch/sh/boards/sh03/led.c new file mode 100644 index 00000000000..c851b0bec80 --- /dev/null +++ b/arch/sh/boards/sh03/led.c @@ -0,0 +1,49 @@ +/* + * linux/arch/sh/boards/sh03/led.c + * + * Copyright (C) 2004 Saito.K Interface Corporation. + * + * This file contains Interface CTP/PCI-SH03 specific LED code. + */ + +#include <linux/config.h> +#include <linux/sched.h> + +/* Cycle the LED's in the clasic Knightrider/Sun pattern */ +void heartbeat_sh03(void) +{ + static unsigned int cnt = 0, period = 0; + volatile unsigned char* p = (volatile unsigned char*)0xa0800000; + static unsigned bit = 0, up = 1; + + cnt += 1; + if (cnt < period) { + return; + } + + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 + */ + period = 110 - ( (300<<FSHIFT)/ + ((avenrun[0]/5) + (3<<FSHIFT)) ); + + if (up) { + if (bit == 7) { + bit--; + up=0; + } else { + bit ++; + } + } else { + if (bit == 0) { + bit++; + up=1; + } else { + bit--; + } + } + *p = 1<<bit; + +} diff --git a/arch/sh/boards/sh03/rtc.c b/arch/sh/boards/sh03/rtc.c new file mode 100644 index 00000000000..cbeca7037ba --- /dev/null +++ b/arch/sh/boards/sh03/rtc.c @@ -0,0 +1,144 @@ +/* + * linux/arch/sh/boards/sh03/rtc.c -- CTP/PCI-SH03 on-chip RTC support + * + * Copyright (C) 2004 Saito.K & Jeanne(ksaito@interface.co.jp) + * + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/time.h> +#include <asm/io.h> +#include <linux/rtc.h> +#include <linux/spinlock.h> + +#define RTC_BASE 0xb0000000 +#define RTC_SEC1 (RTC_BASE + 0) +#define RTC_SEC10 (RTC_BASE + 1) +#define RTC_MIN1 (RTC_BASE + 2) +#define RTC_MIN10 (RTC_BASE + 3) +#define RTC_HOU1 (RTC_BASE + 4) +#define RTC_HOU10 (RTC_BASE + 5) +#define RTC_WEE1 (RTC_BASE + 6) +#define RTC_DAY1 (RTC_BASE + 7) +#define RTC_DAY10 (RTC_BASE + 8) +#define RTC_MON1 (RTC_BASE + 9) +#define RTC_MON10 (RTC_BASE + 10) +#define RTC_YEA1 (RTC_BASE + 11) +#define RTC_YEA10 (RTC_BASE + 12) +#define RTC_YEA100 (RTC_BASE + 13) +#define RTC_YEA1000 (RTC_BASE + 14) +#define RTC_CTL (RTC_BASE + 15) +#define RTC_BUSY 1 +#define RTC_STOP 2 + +#ifndef BCD_TO_BIN +#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10) +#endif + +#ifndef BIN_TO_BCD +#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10) +#endif + +extern void (*rtc_get_time)(struct timespec *); +extern int (*rtc_set_time)(const time_t); +extern spinlock_t rtc_lock; + +unsigned long get_cmos_time(void) +{ + unsigned int year, mon, day, hour, min, sec; + int i; + + spin_lock(&rtc_lock); + again: + for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */ + if (!(ctrl_inb(RTC_CTL) & RTC_BUSY)) + break; + do { + sec = (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10; + min = (ctrl_inb(RTC_MIN1) & 0xf) + (ctrl_inb(RTC_MIN10) & 0xf) * 10; + hour = (ctrl_inb(RTC_HOU1) & 0xf) + (ctrl_inb(RTC_HOU10) & 0xf) * 10; + day = (ctrl_inb(RTC_DAY1) & 0xf) + (ctrl_inb(RTC_DAY10) & 0xf) * 10; + mon = (ctrl_inb(RTC_MON1) & 0xf) + (ctrl_inb(RTC_MON10) & 0xf) * 10; + year = (ctrl_inb(RTC_YEA1) & 0xf) + (ctrl_inb(RTC_YEA10) & 0xf) * 10 + + (ctrl_inb(RTC_YEA100 ) & 0xf) * 100 + + (ctrl_inb(RTC_YEA1000) & 0xf) * 1000; + } while (sec != (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10); + if (year == 0 || mon < 1 || mon > 12 || day > 31 || day < 1 || + hour > 23 || min > 59 || sec > 59) { + printk(KERN_ERR + "SH-03 RTC: invalid value, resetting to 1 Jan 2000\n"); + printk("year=%d, mon=%d, day=%d, hour=%d, min=%d, sec=%d\n", + year, mon, day, hour, min, sec); + + ctrl_outb(0, RTC_SEC1); ctrl_outb(0, RTC_SEC10); + ctrl_outb(0, RTC_MIN1); ctrl_outb(0, RTC_MIN10); + ctrl_outb(0, RTC_HOU1); ctrl_outb(0, RTC_HOU10); + ctrl_outb(6, RTC_WEE1); + ctrl_outb(1, RTC_DAY1); ctrl_outb(0, RTC_DAY10); + ctrl_outb(1, RTC_MON1); ctrl_outb(0, RTC_MON10); + ctrl_outb(0, RTC_YEA1); ctrl_outb(0, RTC_YEA10); + ctrl_outb(0, RTC_YEA100); + ctrl_outb(2, RTC_YEA1000); + ctrl_outb(0, RTC_CTL); + goto again; + } + + spin_unlock(&rtc_lock); + return mktime(year, mon, day, hour, min, sec); +} + +void sh03_rtc_gettimeofday(struct timespec *tv) +{ + + tv->tv_sec = get_cmos_time(); + tv->tv_nsec = 0; +} + +static int set_rtc_mmss(unsigned long nowtime) +{ + int retval = 0; + int real_seconds, real_minutes, cmos_minutes; + int i; + + /* gets recalled with irq locally disabled */ + spin_lock(&rtc_lock); + for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */ + if (!(ctrl_inb(RTC_CTL) & RTC_BUSY)) + break; + cmos_minutes = (ctrl_inb(RTC_MIN1) & 0xf) + (ctrl_inb(RTC_MIN10) & 0xf) * 10; + real_seconds = nowtime % 60; + real_minutes = nowtime / 60; + if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) + real_minutes += 30; /* correct for half hour time zone */ + real_minutes %= 60; + + if (abs(real_minutes - cmos_minutes) < 30) { + ctrl_outb(real_seconds % 10, RTC_SEC1); + ctrl_outb(real_seconds / 10, RTC_SEC10); + ctrl_outb(real_minutes % 10, RTC_MIN1); + ctrl_outb(real_minutes / 10, RTC_MIN10); + } else { + printk(KERN_WARNING + "set_rtc_mmss: can't update from %d to %d\n", + cmos_minutes, real_minutes); + retval = -1; + } + spin_unlock(&rtc_lock); + + return retval; +} + +int sh03_rtc_settimeofday(const time_t secs) +{ + unsigned long nowtime = secs; + + return set_rtc_mmss(nowtime); +} + +void sh03_time_init(void) +{ + rtc_get_time = sh03_rtc_gettimeofday; + rtc_set_time = sh03_rtc_settimeofday; +} diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c new file mode 100644 index 00000000000..d2a08ca5eb8 --- /dev/null +++ b/arch/sh/boards/sh03/setup.c @@ -0,0 +1,72 @@ +/* + * linux/arch/sh/boards/sh03/setup.c + * + * Copyright (C) 2004 Interface Co.,Ltd. Saito.K + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <asm/io.h> +#include <asm/sh03/io.h> +#include <asm/sh03/sh03.h> +#include <asm/addrspace.h> +#include "../../drivers/pci/pci-sh7751.h" + +extern void (*board_time_init)(void); + +const char *get_system_type(void) +{ + return "Interface CTP/PCI-SH03)"; +} + +void init_sh03_IRQ(void) +{ + ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); + + make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); + make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); + make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); + make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); +} + +extern void *cf_io_base; + +unsigned long sh03_isa_port2addr(unsigned long port) +{ + if (PXSEG(port)) + return port; + /* CompactFlash (IDE) */ + if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6)) { + return (unsigned long)cf_io_base + port; + } + return port + SH7751_PCI_IO_BASE; +} + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_sh03 __initmv = { + .mv_nr_irqs = 48, + .mv_isa_port2addr = sh03_isa_port2addr, + .mv_init_irq = init_sh03_IRQ, + +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_sh03, +#endif +}; + +ALIAS_MV(sh03) + +/* arch/sh/boards/sh03/rtc.c */ +void sh03_time_init(void); + +int __init platform_setup(void) +{ + board_time_init = sh03_time_init; + return 0; +} diff --git a/arch/sh/boards/sh2000/Makefile b/arch/sh/boards/sh2000/Makefile new file mode 100644 index 00000000000..05d390c3599 --- /dev/null +++ b/arch/sh/boards/sh2000/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the SH2000 specific parts of the kernel +# + +obj-y := setup.o + diff --git a/arch/sh/boards/sh2000/setup.c b/arch/sh/boards/sh2000/setup.c new file mode 100644 index 00000000000..a290b1d09fb --- /dev/null +++ b/arch/sh/boards/sh2000/setup.c @@ -0,0 +1,71 @@ +/* + * linux/arch/sh/kernel/setup_sh2000.c + * + * Copyright (C) 2001 SUGIOKA Tochinobu + * + * SH-2000 Support. + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/io.h> +#include <asm/machvec.h> +#include <asm/mach/sh2000.h> + +#define CF_CIS_BASE 0xb4200000 + +#define PORT_PECR 0xa4000108 +#define PORT_PHCR 0xa400010E +#define PORT_ICR1 0xa4000010 +#define PORT_IRR0 0xa4000004 + +#define IDE_OFFSET 0xb6200000 +#define NIC_OFFSET 0xb6000000 +#define EXTBUS_OFFSET 0xba000000 + + +const char *get_system_type(void) +{ + return "sh2000"; +} + +static unsigned long sh2000_isa_port2addr(unsigned long offset) +{ + if((offset & ~7) == 0x1f0 || offset == 0x3f6) + return IDE_OFFSET + offset; + else if((offset & ~0x1f) == 0x300) + return NIC_OFFSET + offset; + return EXTBUS_OFFSET + offset; +} + +/* + * The Machine Vector + */ +struct sh_machine_vector mv_sh2000 __initmv = { + .mv_nr_irqs = 80, + .mv_isa_port2addr = sh2000_isa_port2addr, +}; +ALIAS_MV(sh2000) + +/* + * Initialize the board + */ +int __init platform_setup(void) +{ + /* XXX: RTC setting comes here */ + + /* These should be done by BIOS/IPL ... */ + /* Enable nCE2A, nCE2B output */ + ctrl_outw(ctrl_inw(PORT_PECR) & ~0xf00, PORT_PECR); + /* Enable the Compact Flash card, and set the level interrupt */ + ctrl_outw(0x0042, CF_CIS_BASE+0x0200); + /* Enable interrupt */ + ctrl_outw(ctrl_inw(PORT_PHCR) & ~0x03f3, PORT_PHCR); + ctrl_outw(1, PORT_ICR1); + ctrl_outw(ctrl_inw(PORT_IRR0) & ~0xff3f, PORT_IRR0); + printk(KERN_INFO "SH-2000 Setup...done\n"); + return 0; +} diff --git a/arch/sh/boards/snapgear/Makefile b/arch/sh/boards/snapgear/Makefile new file mode 100644 index 00000000000..59fc976bfc2 --- /dev/null +++ b/arch/sh/boards/snapgear/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the SnapGear specific parts of the kernel +# + +obj-y := setup.o io.o rtc.o + diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/snapgear/io.c new file mode 100644 index 00000000000..e2eb78fc381 --- /dev/null +++ b/arch/sh/boards/snapgear/io.c @@ -0,0 +1,226 @@ +/* + * linux/arch/sh/kernel/io_7751se.c + * + * Copyright (C) 2002 David McCullough <davidm@snapgear.com> + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routine for Hitachi 7751 SolutionEngine. + * + * Initial version only to support LAN access; some + * placeholder code from io_se.c left in with the + * expectation of later SuperIO and PCMCIA access. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <asm/io.h> +#include <asm/addrspace.h> + +#include <asm/pci.h> +#include "../../drivers/pci/pci-sh7751.h" + +#ifdef CONFIG_SH_SECUREEDGE5410 +unsigned short secureedge5410_ioport; +#endif + +/* + * The SnapGear uses the built-in PCI controller (PCIC) + * of the 7751 processor + */ + +#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) +#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) +#define PCI_IO_AREA SH7751_PCI_IO_BASE +#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE + + +#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) + + +#define maybebadio(name,port) \ + printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ + #name, (port), (__u32) __builtin_return_address(0)) + + +static inline void delay(void) +{ + ctrl_inw(0xa0000000); +} + + +static inline volatile __u16 *port2adr(unsigned int port) +{ +#if 0 + if (port >= 0x2000) + return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); +#endif + maybebadio(name,(unsigned long)port); + return (volatile __u16*)port; +} + + +/* In case someone configures the kernel w/o PCI support: in that */ +/* scenario, don't ever bother to check for PCI-window addresses */ + +/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ +#if defined(CONFIG_PCI) +#define CHECK_SH7751_PCIIO(port) \ + ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) +#else +#define CHECK_SH7751_PCIIO(port) (0) +#endif + +/* + * General outline: remap really low stuff [eventually] to SuperIO, + * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) + * is mapped through the PCI IO window. Stuff with high bits (PXSEG) + * should be way beyond the window, and is used w/o translation for + * compatibility. + */ + +unsigned char snapgear_inb(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned char *)port; + else if (CHECK_SH7751_PCIIO(port)) + return *(volatile unsigned char *)PCI_IOMAP(port); + else + return (*port2adr(port))&0xff; +} + + +unsigned char snapgear_inb_p(unsigned long port) +{ + unsigned char v; + + if (PXSEG(port)) + v = *(volatile unsigned char *)port; + else if (CHECK_SH7751_PCIIO(port)) + v = *(volatile unsigned char *)PCI_IOMAP(port); + else + v = (*port2adr(port))&0xff; + delay(); + return v; +} + + +unsigned short snapgear_inw(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned short *)port; + else if (CHECK_SH7751_PCIIO(port)) + return *(volatile unsigned short *)PCI_IOMAP(port); + else if (port >= 0x2000) + return *port2adr(port); + else + maybebadio(inw, port); + return 0; +} + + +unsigned int snapgear_inl(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned long *)port; + else if (CHECK_SH7751_PCIIO(port)) + return *(volatile unsigned int *)PCI_IOMAP(port); + else if (port >= 0x2000) + return *port2adr(port); + else + maybebadio(inl, port); + return 0; +} + + +void snapgear_outb(unsigned char value, unsigned long port) +{ + + if (PXSEG(port)) + *(volatile unsigned char *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned char*)PCI_IOMAP(port)) = value; + else + *(port2adr(port)) = value; +} + + +void snapgear_outb_p(unsigned char value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned char *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned char*)PCI_IOMAP(port)) = value; + else + *(port2adr(port)) = value; + delay(); +} + + +void snapgear_outw(unsigned short value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned short *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned short *)PCI_IOMAP(port)) = value; + else if (port >= 0x2000) + *port2adr(port) = value; + else + maybebadio(outw, port); +} + + +void snapgear_outl(unsigned int value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned long *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned long*)PCI_IOMAP(port)) = value; + else + maybebadio(outl, port); +} + +void snapgear_insl(unsigned long port, void *addr, unsigned long count) +{ + maybebadio(insl, port); +} + +void snapgear_outsl(unsigned long port, const void *addr, unsigned long count) +{ + maybebadio(outsw, port); +} + +/* Map ISA bus address to the real address. Only for PCMCIA. */ + + +/* ISA page descriptor. */ +static __u32 sh_isa_memmap[256]; + + +#if 0 +static int sh_isa_mmap(__u32 start, __u32 length, __u32 offset) +{ + int idx; + + if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000)) + return -1; + + idx = start >> 12; + sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff); +#if 0 + printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n", + start, length, offset, idx, sh_isa_memmap[idx]); +#endif + return 0; +} +#endif + +unsigned long snapgear_isa_port2addr(unsigned long offset) +{ + int idx; + + idx = (offset >> 12) & 0xff; + offset &= 0xfff; + return sh_isa_memmap[idx] + offset; +} diff --git a/arch/sh/boards/snapgear/rtc.c b/arch/sh/boards/snapgear/rtc.c new file mode 100644 index 00000000000..b71e009da35 --- /dev/null +++ b/arch/sh/boards/snapgear/rtc.c @@ -0,0 +1,333 @@ +/****************************************************************************/ +/* + * linux/arch/sh/boards/snapgear/rtc.c -- Secureedge5410 RTC code + * + * Copyright (C) 2002 David McCullough <davidm@snapgear.com> + * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org> + * + * The SecureEdge5410 can have one of 2 real time clocks, the SH + * built in version or the preferred external DS1302. Here we work out + * each to see what we have and then run with it. + */ +/****************************************************************************/ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/time.h> +#include <linux/rtc.h> +#include <linux/mc146818rtc.h> + +#include <asm/io.h> +#include <asm/rtc.h> +#include <asm/mc146818rtc.h> + +/****************************************************************************/ + +static int use_ds1302 = 0; + +/****************************************************************************/ +/* + * we need to implement a DS1302 driver here that can operate in + * conjunction with the builtin rtc driver which is already quite friendly + */ +/*****************************************************************************/ + +#define RTC_CMD_READ 0x81 /* Read command */ +#define RTC_CMD_WRITE 0x80 /* Write command */ + +#define RTC_ADDR_YEAR 0x06 /* Address of year register */ +#define RTC_ADDR_DAY 0x05 /* Address of day of week register */ +#define RTC_ADDR_MON 0x04 /* Address of month register */ +#define RTC_ADDR_DATE 0x03 /* Address of day of month register */ +#define RTC_ADDR_HOUR 0x02 /* Address of hour register */ +#define RTC_ADDR_MIN 0x01 /* Address of minute register */ +#define RTC_ADDR_SEC 0x00 /* Address of second register */ + +#define RTC_RESET 0x1000 +#define RTC_IODATA 0x0800 +#define RTC_SCLK 0x0400 + +#define set_dirp(x) +#define get_dirp(x) 0 +#define set_dp(x) SECUREEDGE_WRITE_IOPORT(x, 0x1c00) +#define get_dp(x) SECUREEDGE_READ_IOPORT() + +static void ds1302_sendbits(unsigned int val) +{ + int i; + + for (i = 8; (i); i--, val >>= 1) { + set_dp((get_dp() & ~RTC_IODATA) | ((val & 0x1) ? RTC_IODATA : 0)); + set_dp(get_dp() | RTC_SCLK); // clock high + set_dp(get_dp() & ~RTC_SCLK); // clock low + } +} + +static unsigned int ds1302_recvbits(void) +{ + unsigned int val; + int i; + + for (i = 0, val = 0; (i < 8); i++) { + val |= (((get_dp() & RTC_IODATA) ? 1 : 0) << i); + set_dp(get_dp() | RTC_SCLK); // clock high + set_dp(get_dp() & ~RTC_SCLK); // clock low + } + return(val); +} + +static unsigned int ds1302_readbyte(unsigned int addr) +{ + unsigned int val; + unsigned long flags; + +#if 0 + printk("SnapGear RTC: ds1302_readbyte(addr=%x)\n", addr); +#endif + + local_irq_save(flags); + set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); + set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); + + set_dp(get_dp() | RTC_RESET); + ds1302_sendbits(((addr & 0x3f) << 1) | RTC_CMD_READ); + set_dirp(get_dirp() & ~RTC_IODATA); + val = ds1302_recvbits(); + set_dp(get_dp() & ~RTC_RESET); + local_irq_restore(flags); + + return(val); +} + +static void ds1302_writebyte(unsigned int addr, unsigned int val) +{ + unsigned long flags; + +#if 0 + printk("SnapGear RTC: ds1302_writebyte(addr=%x)\n", addr); +#endif + + local_irq_save(flags); + set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); + set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); + set_dp(get_dp() | RTC_RESET); + ds1302_sendbits(((addr & 0x3f) << 1) | RTC_CMD_WRITE); + ds1302_sendbits(val); + set_dp(get_dp() & ~RTC_RESET); + local_irq_restore(flags); +} + +static void ds1302_reset(void) +{ + unsigned long flags; + /* Hardware dependant reset/init */ + local_irq_save(flags); + set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); + set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); + local_irq_restore(flags); +} + +/*****************************************************************************/ + +static inline int bcd2int(int val) +{ + return((((val & 0xf0) >> 4) * 10) + (val & 0xf)); +} + +static inline int int2bcd(int val) +{ + return(((val / 10) << 4) + (val % 10)); +} + +/*****************************************************************************/ +/* + * Write and Read some RAM in the DS1302, if it works assume it's there + * Otherwise use the SH4 internal RTC + */ + +void snapgear_rtc_gettimeofday(struct timespec *); +int snapgear_rtc_settimeofday(const time_t); + +void __init secureedge5410_rtc_init(void) +{ + unsigned char *test = "snapgear"; + int i; + + ds1302_reset(); + + use_ds1302 = 1; + + for (i = 0; test[i]; i++) + ds1302_writebyte(32 + i, test[i]); + + for (i = 0; test[i]; i++) + if (ds1302_readbyte(32 + i) != test[i]) { + use_ds1302 = 0; + break; + } + + if (use_ds1302) { + rtc_get_time = snapgear_rtc_gettimeofday; + rtc_set_time = snapgear_rtc_settimeofday; + } else { + rtc_get_time = sh_rtc_gettimeofday; + rtc_set_time = sh_rtc_settimeofday; + } + + printk("SnapGear RTC: using %s rtc.\n", use_ds1302 ? "ds1302" : "internal"); +} + +/****************************************************************************/ +/* + * our generic interface that chooses the correct code to use + */ + +void snapgear_rtc_gettimeofday(struct timespec *ts) +{ + unsigned int sec, min, hr, day, mon, yr; + + if (!use_ds1302) { + sh_rtc_gettimeofday(ts); + return; + } + + sec = bcd2int(ds1302_readbyte(RTC_ADDR_SEC)); + min = bcd2int(ds1302_readbyte(RTC_ADDR_MIN)); + hr = bcd2int(ds1302_readbyte(RTC_ADDR_HOUR)); + day = bcd2int(ds1302_readbyte(RTC_ADDR_DATE)); + mon = bcd2int(ds1302_readbyte(RTC_ADDR_MON)); + yr = bcd2int(ds1302_readbyte(RTC_ADDR_YEAR)); + +bad_time: + if (yr > 99 || mon < 1 || mon > 12 || day > 31 || day < 1 || + hr > 23 || min > 59 || sec > 59) { + printk(KERN_ERR + "SnapGear RTC: invalid value, resetting to 1 Jan 2000\n"); + ds1302_writebyte(RTC_ADDR_MIN, min = 0); + ds1302_writebyte(RTC_ADDR_HOUR, hr = 0); + ds1302_writebyte(RTC_ADDR_DAY, 7); + ds1302_writebyte(RTC_ADDR_DATE, day = 1); + ds1302_writebyte(RTC_ADDR_MON, mon = 1); + ds1302_writebyte(RTC_ADDR_YEAR, yr = 0); + ds1302_writebyte(RTC_ADDR_SEC, sec = 0); + } + + ts->tv_sec = mktime(2000 + yr, mon, day, hr, min, sec); + if (ts->tv_sec < 0) { +#if 0 + printk("BAD TIME %d %d %d %d %d %d\n", yr, mon, day, hr, min, sec); +#endif + yr = 100; + goto bad_time; + } + ts->tv_nsec = 0; +} + +int snapgear_rtc_settimeofday(const time_t secs) +{ + int retval = 0; + int real_seconds, real_minutes, cmos_minutes; + unsigned long nowtime; + + if (!use_ds1302) + return sh_rtc_settimeofday(secs); + +/* + * This is called direct from the kernel timer handling code. + * It is supposed to synchronize the kernel clock to the RTC. + */ + + nowtime = secs; + +#if 1 + printk("SnapGear RTC: snapgear_rtc_settimeofday(nowtime=%ld)\n", nowtime); +#endif + + /* STOP RTC */ + ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) | 0x80); + + cmos_minutes = bcd2int(ds1302_readbyte(RTC_ADDR_MIN)); + + /* + * since we're only adjusting minutes and seconds, + * don't interfere with hour overflow. This avoids + * messing with unknown time zones but requires your + * RTC not to be off by more than 15 minutes + */ + real_seconds = nowtime % 60; + real_minutes = nowtime / 60; + if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) + real_minutes += 30; /* correct for half hour time zone */ + real_minutes %= 60; + + if (abs(real_minutes - cmos_minutes) < 30) { + ds1302_writebyte(RTC_ADDR_MIN, int2bcd(real_minutes)); + ds1302_writebyte(RTC_ADDR_SEC, int2bcd(real_seconds)); + } else { + printk(KERN_WARNING + "SnapGear RTC: can't update from %d to %d\n", + cmos_minutes, real_minutes); + retval = -1; + } + + /* START RTC */ + ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) & ~0x80); + return(0); +} + +unsigned char secureedge5410_cmos_read(int addr) +{ + unsigned char val = 0; + + if (!use_ds1302) + return(__CMOS_READ(addr, w)); + + switch(addr) { + case RTC_SECONDS: val = ds1302_readbyte(RTC_ADDR_SEC); break; + case RTC_SECONDS_ALARM: break; + case RTC_MINUTES: val = ds1302_readbyte(RTC_ADDR_MIN); break; + case RTC_MINUTES_ALARM: break; + case RTC_HOURS: val = ds1302_readbyte(RTC_ADDR_HOUR); break; + case RTC_HOURS_ALARM: break; + case RTC_DAY_OF_WEEK: val = ds1302_readbyte(RTC_ADDR_DAY); break; + case RTC_DAY_OF_MONTH: val = ds1302_readbyte(RTC_ADDR_DATE); break; + case RTC_MONTH: val = ds1302_readbyte(RTC_ADDR_MON); break; + case RTC_YEAR: val = ds1302_readbyte(RTC_ADDR_YEAR); break; + case RTC_REG_A: /* RTC_FREQ_SELECT */ break; + case RTC_REG_B: /* RTC_CONTROL */ break; + case RTC_REG_C: /* RTC_INTR_FLAGS */ break; + case RTC_REG_D: val = RTC_VRT /* RTC_VALID */; break; + default: break; + } + + return(val); +} + +void secureedge5410_cmos_write(unsigned char val, int addr) +{ + if (!use_ds1302) { + __CMOS_WRITE(val, addr, w); + return; + } + + switch(addr) { + case RTC_SECONDS: ds1302_writebyte(RTC_ADDR_SEC, val); break; + case RTC_SECONDS_ALARM: break; + case RTC_MINUTES: ds1302_writebyte(RTC_ADDR_MIN, val); break; + case RTC_MINUTES_ALARM: break; + case RTC_HOURS: ds1302_writebyte(RTC_ADDR_HOUR, val); break; + case RTC_HOURS_ALARM: break; + case RTC_DAY_OF_WEEK: ds1302_writebyte(RTC_ADDR_DAY, val); break; + case RTC_DAY_OF_MONTH: ds1302_writebyte(RTC_ADDR_DATE, val); break; + case RTC_MONTH: ds1302_writebyte(RTC_ADDR_MON, val); break; + case RTC_YEAR: ds1302_writebyte(RTC_ADDR_YEAR, val); break; + case RTC_REG_A: /* RTC_FREQ_SELECT */ break; + case RTC_REG_B: /* RTC_CONTROL */ break; + case RTC_REG_C: /* RTC_INTR_FLAGS */ break; + case RTC_REG_D: /* RTC_VALID */ break; + default: break; + } +} + +/****************************************************************************/ diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c new file mode 100644 index 00000000000..08fc98342a0 --- /dev/null +++ b/arch/sh/boards/snapgear/setup.c @@ -0,0 +1,216 @@ +/****************************************************************************/ +/* + * linux/arch/sh/boards/snapgear/setup.c + * + * Copyright (C) 2002 David McCullough <davidm@snapgear.com> + * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org> + * + * Based on files with the following comments: + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Modified for 7751 Solution Engine by + * Ian da Silva and Jeremy Siegel, 2001. + */ +/****************************************************************************/ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/sched.h> + +#include <asm/machvec.h> +#include <asm/mach/io.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/cpu/timer.h> + +extern void (*board_time_init)(void); +extern void secureedge5410_rtc_init(void); +extern void pcibios_init(void); + +/****************************************************************************/ +/* + * EraseConfig handling functions + */ + +static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + volatile char dummy __attribute__((unused)) = * (volatile char *) 0xb8000000; + + printk("SnapGear: erase switch interrupt!\n"); + + return IRQ_HANDLED; +} + +static int __init eraseconfig_init(void) +{ + printk("SnapGear: EraseConfig init\n"); + /* Setup "EraseConfig" switch on external IRQ 0 */ + if (request_irq(IRL0_IRQ, eraseconfig_interrupt, SA_INTERRUPT, + "Erase Config", NULL)) + printk("SnapGear: failed to register IRQ%d for Reset witch\n", + IRL0_IRQ); + else + printk("SnapGear: registered EraseConfig switch on IRQ%d\n", + IRL0_IRQ); + return(0); +} + +module_init(eraseconfig_init); + +/****************************************************************************/ +/* + * Initialize IRQ setting + * + * IRL0 = erase switch + * IRL1 = eth0 + * IRL2 = eth1 + * IRL3 = crypto + */ + +static void __init init_snapgear_IRQ(void) +{ + /* enable individual interrupt mode for externals */ + ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); + + printk("Setup SnapGear IRQ/IPR ...\n"); + + make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); + make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); + make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); + make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); +} + +/****************************************************************************/ +/* + * Fast poll interrupt simulator. + */ + +/* + * Leave all of the fast timer/fast poll stuff commented out for now, since + * it's not clear whether it actually works or not. Since it wasn't being used + * at all in 2.4, we'll assume it's not sane for 2.6 either.. -- PFM + */ +#if 0 +#define FAST_POLL 1000 +//#define FAST_POLL_INTR + +#define FASTTIMER_IRQ 17 +#define FASTTIMER_IPR_ADDR INTC_IPRA +#define FASTTIMER_IPR_POS 2 +#define FASTTIMER_PRIORITY 3 + +#ifdef FAST_POLL_INTR +#define TMU1_TCR_INIT 0x0020 +#else +#define TMU1_TCR_INIT 0 +#endif +#define TMU_TSTR_INIT 1 +#define TMU1_TCR_CALIB 0x0000 + + +#ifdef FAST_POLL_INTR +static void fast_timer_irq(int irq, void *dev_instance, struct pt_regs *regs) +{ + unsigned long timer_status; + timer_status = ctrl_inw(TMU1_TCR); + timer_status &= ~0x100; + ctrl_outw(timer_status, TMU1_TCR); +} +#endif + +/* + * return the current ticks on the fast timer + */ + +unsigned long fast_timer_count(void) +{ + return(ctrl_inl(TMU1_TCNT)); +} + +/* + * setup a fast timer for profiling etc etc + */ + +static void setup_fast_timer() +{ + unsigned long interval; + +#ifdef FAST_POLL_INTR + interval = (current_cpu_data.module_clock/4 + FAST_POLL/2) / FAST_POLL; + + make_ipr_irq(FASTTIMER_IRQ, FASTTIMER_IPR_ADDR, FASTTIMER_IPR_POS, + FASTTIMER_PRIORITY); + + printk("SnapGear: %dHz fast timer on IRQ %d\n",FAST_POLL,FASTTIMER_IRQ); + + if (request_irq(FASTTIMER_IRQ, fast_timer_irq, 0, "SnapGear fast timer", + NULL) != 0) + printk("%s(%d): request_irq() failed?\n", __FILE__, __LINE__); +#else + printk("SnapGear: fast timer running\n",FAST_POLL,FASTTIMER_IRQ); + interval = 0xffffffff; +#endif + + ctrl_outb(ctrl_inb(TMU_TSTR) & ~0x2, TMU_TSTR); /* disable timer 1 */ + ctrl_outw(TMU1_TCR_INIT, TMU1_TCR); + ctrl_outl(interval, TMU1_TCOR); + ctrl_outl(interval, TMU1_TCNT); + ctrl_outb(ctrl_inb(TMU_TSTR) | 0x2, TMU_TSTR); /* enable timer 1 */ + + printk("Timer count 1 = 0x%x\n", fast_timer_count()); + udelay(1000); + printk("Timer count 2 = 0x%x\n", fast_timer_count()); +} +#endif + +/****************************************************************************/ + +const char *get_system_type(void) +{ + return "SnapGear SecureEdge5410"; +} + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_snapgear __initmv = { + .mv_nr_irqs = 72, + + .mv_inb = snapgear_inb, + .mv_inw = snapgear_inw, + .mv_inl = snapgear_inl, + .mv_outb = snapgear_outb, + .mv_outw = snapgear_outw, + .mv_outl = snapgear_outl, + + .mv_inb_p = snapgear_inb_p, + .mv_inw_p = snapgear_inw, + .mv_inl_p = snapgear_inl, + .mv_outb_p = snapgear_outb_p, + .mv_outw_p = snapgear_outw, + .mv_outl_p = snapgear_outl, + + .mv_isa_port2addr = snapgear_isa_port2addr, + + .mv_init_irq = init_snapgear_IRQ, +}; +ALIAS_MV(snapgear) + +/* + * Initialize the board + */ + +int __init platform_setup(void) +{ + board_time_init = secureedge5410_rtc_init; + + return 0; +} + diff --git a/arch/sh/boards/superh/microdev/Makefile b/arch/sh/boards/superh/microdev/Makefile new file mode 100644 index 00000000000..1387dd6c85e --- /dev/null +++ b/arch/sh/boards/superh/microdev/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the SuperH MicroDev specific parts of the kernel +# + +obj-y := setup.o irq.o io.o + +obj-$(CONFIG_HEARTBEAT) += led.o + diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/superh/microdev/io.c new file mode 100644 index 00000000000..fe83b2c0307 --- /dev/null +++ b/arch/sh/boards/superh/microdev/io.c @@ -0,0 +1,370 @@ +/* + * linux/arch/sh/kernel/io_microdev.c + * + * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) + * Copyright (C) 2003, 2004 SuperH, Inc. + * Copyright (C) 2004 Paul Mundt + * + * SuperH SH4-202 MicroDev board support. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/wait.h> +#include <asm/io.h> +#include <asm/mach/io.h> + + /* + * we need to have a 'safe' address to re-direct all I/O requests + * that we do not explicitly wish to handle. This safe address + * must have the following properies: + * + * * writes are ignored (no exception) + * * reads are benign (no side-effects) + * * accesses of width 1, 2 and 4-bytes are all valid. + * + * The Processor Version Register (PVR) has these properties. + */ +#define PVR 0xff000030 /* Processor Version Register */ + + +#define IO_IDE2_BASE 0x170ul /* I/O base for SMSC FDC37C93xAPM IDE #2 */ +#define IO_IDE1_BASE 0x1f0ul /* I/O base for SMSC FDC37C93xAPM IDE #1 */ +#define IO_ISP1161_BASE 0x290ul /* I/O port for Philips ISP1161x USB chip */ +#define IO_SERIAL2_BASE 0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */ +#define IO_LAN91C111_BASE 0x300ul /* I/O base for SMSC LAN91C111 Ethernet chip */ +#define IO_IDE2_MISC 0x376ul /* I/O misc for SMSC FDC37C93xAPM IDE #2 */ +#define IO_SUPERIO_BASE 0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */ +#define IO_IDE1_MISC 0x3f6ul /* I/O misc for SMSC FDC37C93xAPM IDE #1 */ +#define IO_SERIAL1_BASE 0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */ + +#define IO_ISP1161_EXTENT 0x04ul /* I/O extent for Philips ISP1161x USB chip */ +#define IO_LAN91C111_EXTENT 0x10ul /* I/O extent for SMSC LAN91C111 Ethernet chip */ +#define IO_SUPERIO_EXTENT 0x02ul /* I/O extent for SMSC FDC37C93xAPM SuperIO chip */ +#define IO_IDE_EXTENT 0x08ul /* I/O extent for IDE Task Register set */ +#define IO_SERIAL_EXTENT 0x10ul + +#define IO_LAN91C111_PHYS 0xa7500000ul /* Physical address of SMSC LAN91C111 Ethernet chip */ +#define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */ +#define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */ + +#define PORT2ADDR(x) (microdev_isa_port2addr(x)) + + +static inline void delay(void) +{ +#if defined(CONFIG_PCI) + /* System board present, just make a dummy SRAM access. (CS0 will be + mapped to PCI memory, probably good to avoid it.) */ + ctrl_inw(0xa6800000); +#else + /* CS0 will be mapped to flash, ROM etc so safe to access it. */ + ctrl_inw(0xa0000000); +#endif +} + +unsigned char microdev_inb(unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) + return microdev_pci_inb(port); +#endif + return *(volatile unsigned char*)PORT2ADDR(port); +} + +unsigned short microdev_inw(unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) + return microdev_pci_inw(port); +#endif + return *(volatile unsigned short*)PORT2ADDR(port); +} + +unsigned int microdev_inl(unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) + return microdev_pci_inl(port); +#endif + return *(volatile unsigned int*)PORT2ADDR(port); +} + +void microdev_outb(unsigned char b, unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) { + microdev_pci_outb(b, port); + return; + } +#endif + + /* + * There is a board feature with the current SH4-202 MicroDev in + * that the 2 byte enables (nBE0 and nBE1) are tied together (and + * to the Chip Select Line (Ethernet_CS)). Due to this conectivity, + * it is not possible to safely perform 8-bit writes to the + * Ethernet registers, as 16-bits will be consumed from the Data + * lines (corrupting the other byte). Hence, this function is + * written to impliment 16-bit read/modify/write for all byte-wide + * acceses. + * + * Note: there is no problem with byte READS (even or odd). + * + * Sean McGoogan - 16th June 2003. + */ + if ((port >= IO_LAN91C111_BASE) && + (port < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) { + /* + * Then are trying to perform a byte-write to the + * LAN91C111. This needs special care. + */ + if (port % 2 == 1) { /* is the port odd ? */ + /* unset bit-0, i.e. make even */ + const unsigned long evenPort = port-1; + unsigned short word; + + /* + * do a 16-bit read/write to write to 'port', + * preserving even byte. + * + * Even addresses are bits 0-7 + * Odd addresses are bits 8-15 + */ + word = microdev_inw(evenPort); + word = (word & 0xffu) | (b << 8); + microdev_outw(word, evenPort); + } else { + /* else, we are trying to do an even byte write */ + unsigned short word; + + /* + * do a 16-bit read/write to write to 'port', + * preserving odd byte. + * + * Even addresses are bits 0-7 + * Odd addresses are bits 8-15 + */ + word = microdev_inw(port); + word = (word & 0xff00u) | (b); + microdev_outw(word, port); + } + } else { + *(volatile unsigned char*)PORT2ADDR(port) = b; + } +} + +void microdev_outw(unsigned short b, unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) { + microdev_pci_outw(b, port); + return; + } +#endif + *(volatile unsigned short*)PORT2ADDR(port) = b; +} + +void microdev_outl(unsigned int b, unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) { + microdev_pci_outl(b, port); + return; + } +#endif + *(volatile unsigned int*)PORT2ADDR(port) = b; +} + +unsigned char microdev_inb_p(unsigned long port) +{ + unsigned char v = microdev_inb(port); + delay(); + return v; +} + +unsigned short microdev_inw_p(unsigned long port) +{ + unsigned short v = microdev_inw(port); + delay(); + return v; +} + +unsigned int microdev_inl_p(unsigned long port) +{ + unsigned int v = microdev_inl(port); + delay(); + return v; +} + +void microdev_outb_p(unsigned char b, unsigned long port) +{ + microdev_outb(b, port); + delay(); +} + +void microdev_outw_p(unsigned short b, unsigned long port) +{ + microdev_outw(b, port); + delay(); +} + +void microdev_outl_p(unsigned int b, unsigned long port) +{ + microdev_outl(b, port); + delay(); +} + +void microdev_insb(unsigned long port, void *buffer, unsigned long count) +{ + volatile unsigned char *port_addr; + unsigned char *buf = buffer; + + port_addr = (volatile unsigned char *)PORT2ADDR(port); + + while (count--) + *buf++ = *port_addr; +} + +void microdev_insw(unsigned long port, void *buffer, unsigned long count) +{ + volatile unsigned short *port_addr; + unsigned short *buf = buffer; + + port_addr = (volatile unsigned short *)PORT2ADDR(port); + + while (count--) + *buf++ = *port_addr; +} + +void microdev_insl(unsigned long port, void *buffer, unsigned long count) +{ + volatile unsigned long *port_addr; + unsigned int *buf = buffer; + + port_addr = (volatile unsigned long *)PORT2ADDR(port); + + while (count--) + *buf++ = *port_addr; +} + +void microdev_outsb(unsigned long port, const void *buffer, unsigned long count) +{ + volatile unsigned char *port_addr; + const unsigned char *buf = buffer; + + port_addr = (volatile unsigned char *)PORT2ADDR(port); + + while (count--) + *port_addr = *buf++; +} + +void microdev_outsw(unsigned long port, const void *buffer, unsigned long count) +{ + volatile unsigned short *port_addr; + const unsigned short *buf = buffer; + + port_addr = (volatile unsigned short *)PORT2ADDR(port); + + while (count--) + *port_addr = *buf++; +} + +void microdev_outsl(unsigned long port, const void *buffer, unsigned long count) +{ + volatile unsigned long *port_addr; + const unsigned int *buf = buffer; + + port_addr = (volatile unsigned long *)PORT2ADDR(port); + + while (count--) + *port_addr = *buf++; +} + +/* + * map I/O ports to memory-mapped addresses + */ +unsigned long microdev_isa_port2addr(unsigned long offset) +{ + unsigned long result; + + if ((offset >= IO_LAN91C111_BASE) && + (offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) { + /* + * SMSC LAN91C111 Ethernet chip + */ + result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE; + } else if ((offset >= IO_SUPERIO_BASE) && + (offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * Configuration Registers + */ + result = IO_SUPERIO_PHYS + (offset << 1); +#if 0 + } else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG || + offset == KBD_STATUS_REG) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * PS/2 Keyboard + Mouse (ports 0x60 and 0x64). + */ + result = IO_SUPERIO_PHYS + (offset << 1); +#endif + } else if (((offset >= IO_IDE1_BASE) && + (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) || + (offset == IO_IDE1_MISC)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * IDE #1 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if (((offset >= IO_IDE2_BASE) && + (offset < IO_IDE2_BASE + IO_IDE_EXTENT)) || + (offset == IO_IDE2_MISC)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * IDE #2 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if ((offset >= IO_SERIAL1_BASE) && + (offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * Serial #1 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if ((offset >= IO_SERIAL2_BASE) && + (offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * Serial #2 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if ((offset >= IO_ISP1161_BASE) && + (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) { + /* + * Philips USB ISP1161x chip + */ + result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE; + } else { + /* + * safe default. + */ + printk("Warning: unexpected port in %s( offset = 0x%lx )\n", + __FUNCTION__, offset); + result = PVR; + } + + return result; +} + diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/superh/microdev/irq.c new file mode 100644 index 00000000000..1298883eca4 --- /dev/null +++ b/arch/sh/boards/superh/microdev/irq.c @@ -0,0 +1,200 @@ +/* + * arch/sh/boards/superh/microdev/irq.c + * + * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) + * + * SuperH SH4-202 MicroDev board support. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/mach/irq.h> + +#define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */ + + +static const struct { + unsigned char fpgaIrq; + unsigned char mapped; + const char *name; +} fpgaIrqTable[NUM_EXTERNAL_IRQS] = { + { 0, 0, "unused" }, /* IRQ #0 IRL=15 0x200 */ + { MICRODEV_FPGA_IRQ_KEYBOARD, 1, "keyboard" }, /* IRQ #1 IRL=14 0x220 */ + { MICRODEV_FPGA_IRQ_SERIAL1, 1, "Serial #1"}, /* IRQ #2 IRL=13 0x240 */ + { MICRODEV_FPGA_IRQ_ETHERNET, 1, "Ethernet" }, /* IRQ #3 IRL=12 0x260 */ + { MICRODEV_FPGA_IRQ_SERIAL2, 0, "Serial #2"}, /* IRQ #4 IRL=11 0x280 */ + { 0, 0, "unused" }, /* IRQ #5 IRL=10 0x2a0 */ + { 0, 0, "unused" }, /* IRQ #6 IRL=9 0x2c0 */ + { MICRODEV_FPGA_IRQ_USB_HC, 1, "USB" }, /* IRQ #7 IRL=8 0x2e0 */ + { MICRODEV_IRQ_PCI_INTA, 1, "PCI INTA" }, /* IRQ #8 IRL=7 0x300 */ + { MICRODEV_IRQ_PCI_INTB, 1, "PCI INTB" }, /* IRQ #9 IRL=6 0x320 */ + { MICRODEV_IRQ_PCI_INTC, 1, "PCI INTC" }, /* IRQ #10 IRL=5 0x340 */ + { MICRODEV_IRQ_PCI_INTD, 1, "PCI INTD" }, /* IRQ #11 IRL=4 0x360 */ + { MICRODEV_FPGA_IRQ_MOUSE, 1, "mouse" }, /* IRQ #12 IRL=3 0x380 */ + { MICRODEV_FPGA_IRQ_IDE2, 1, "IDE #2" }, /* IRQ #13 IRL=2 0x3a0 */ + { MICRODEV_FPGA_IRQ_IDE1, 1, "IDE #1" }, /* IRQ #14 IRL=1 0x3c0 */ + { 0, 0, "unused" }, /* IRQ #15 IRL=0 0x3e0 */ +}; + +#if (MICRODEV_LINUX_IRQ_KEYBOARD != 1) +# error Inconsistancy in defining the IRQ# for Keyboard! +#endif + +#if (MICRODEV_LINUX_IRQ_ETHERNET != 3) +# error Inconsistancy in defining the IRQ# for Ethernet! +#endif + +#if (MICRODEV_LINUX_IRQ_USB_HC != 7) +# error Inconsistancy in defining the IRQ# for USB! +#endif + +#if (MICRODEV_LINUX_IRQ_MOUSE != 12) +# error Inconsistancy in defining the IRQ# for PS/2 Mouse! +#endif + +#if (MICRODEV_LINUX_IRQ_IDE2 != 13) +# error Inconsistancy in defining the IRQ# for secondary IDE! +#endif + +#if (MICRODEV_LINUX_IRQ_IDE1 != 14) +# error Inconsistancy in defining the IRQ# for primary IDE! +#endif + +static void enable_microdev_irq(unsigned int irq); +static void disable_microdev_irq(unsigned int irq); + + /* shutdown is same as "disable" */ +#define shutdown_microdev_irq disable_microdev_irq + +static void mask_and_ack_microdev(unsigned int); +static void end_microdev_irq(unsigned int irq); + +static unsigned int startup_microdev_irq(unsigned int irq) +{ + enable_microdev_irq(irq); + return 0; /* never anything pending */ +} + +static struct hw_interrupt_type microdev_irq_type = { + "MicroDev-IRQ", + startup_microdev_irq, + shutdown_microdev_irq, + enable_microdev_irq, + disable_microdev_irq, + mask_and_ack_microdev, + end_microdev_irq +}; + +static void disable_microdev_irq(unsigned int irq) +{ + unsigned int flags; + unsigned int fpgaIrq; + + if (irq >= NUM_EXTERNAL_IRQS) return; + if (!fpgaIrqTable[irq].mapped) return; + + fpgaIrq = fpgaIrqTable[irq].fpgaIrq; + + /* disable interrupts */ + local_irq_save(flags); + + /* disable interupts on the FPGA INTC register */ + ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG); + + /* restore interrupts */ + local_irq_restore(flags); +} + +static void enable_microdev_irq(unsigned int irq) +{ + unsigned long priorityReg, priorities, pri; + unsigned int flags; + unsigned int fpgaIrq; + + + if (irq >= NUM_EXTERNAL_IRQS) return; + if (!fpgaIrqTable[irq].mapped) return; + + pri = 15 - irq; + + fpgaIrq = fpgaIrqTable[irq].fpgaIrq; + priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq); + + /* disable interrupts */ + local_irq_save(flags); + + /* set priority for the interrupt */ + priorities = ctrl_inl(priorityReg); + priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq); + priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri); + ctrl_outl(priorities, priorityReg); + + /* enable interupts on the FPGA INTC register */ + ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG); + + /* restore interrupts */ + local_irq_restore(flags); +} + + /* This functions sets the desired irq handler to be a MicroDev type */ +static void __init make_microdev_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = µdev_irq_type; + disable_microdev_irq(irq); +} + +static void mask_and_ack_microdev(unsigned int irq) +{ + disable_microdev_irq(irq); +} + +static void end_microdev_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + { + enable_microdev_irq(irq); + } +} + +extern void __init init_microdev_irq(void) +{ + int i; + + /* disable interupts on the FPGA INTC register */ + ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG); + + for (i = 0; i < NUM_EXTERNAL_IRQS; i++) + { + make_microdev_irq(i); + } +} + +extern void microdev_print_fpga_intc_status(void) +{ + volatile unsigned int * const intenb = (unsigned int*)MICRODEV_FPGA_INTENB_REG; + volatile unsigned int * const intdsb = (unsigned int*)MICRODEV_FPGA_INTDSB_REG; + volatile unsigned int * const intpria = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(0); + volatile unsigned int * const intprib = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(8); + volatile unsigned int * const intpric = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(16); + volatile unsigned int * const intprid = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(24); + volatile unsigned int * const intsrc = (unsigned int*)MICRODEV_FPGA_INTSRC_REG; + volatile unsigned int * const intreq = (unsigned int*)MICRODEV_FPGA_INTREQ_REG; + + printk("-------------------------- microdev_print_fpga_intc_status() ------------------\n"); + printk("FPGA_INTENB = 0x%08x\n", *intenb); + printk("FPGA_INTDSB = 0x%08x\n", *intdsb); + printk("FPGA_INTSRC = 0x%08x\n", *intsrc); + printk("FPGA_INTREQ = 0x%08x\n", *intreq); + printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria); + printk("-------------------------------------------------------------------------------\n"); +} + + diff --git a/arch/sh/boards/superh/microdev/led.c b/arch/sh/boards/superh/microdev/led.c new file mode 100644 index 00000000000..52a98e69d3f --- /dev/null +++ b/arch/sh/boards/superh/microdev/led.c @@ -0,0 +1,102 @@ +/* + * linux/arch/sh/kernel/led_microdev.c + * + * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com> + * Copyright (C) 2003 Richard Curnow (Richard.Curnow@superh.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + */ + +#include <linux/config.h> +#include <asm/io.h> + +#define LED_REGISTER 0xa6104d20 + +static void mach_led_d9(int value) +{ + unsigned long reg; + reg = ctrl_inl(LED_REGISTER); + reg &= ~1; + reg |= (value & 1); + ctrl_outl(reg, LED_REGISTER); + return; +} + +static void mach_led_d10(int value) +{ + unsigned long reg; + reg = ctrl_inl(LED_REGISTER); + reg &= ~2; + reg |= ((value & 1) << 1); + ctrl_outl(reg, LED_REGISTER); + return; +} + + +#ifdef CONFIG_HEARTBEAT +#include <linux/sched.h> + +static unsigned char banner_table[] = { + 0x11, 0x01, 0x11, 0x01, 0x11, 0x03, + 0x11, 0x01, 0x11, 0x01, 0x13, 0x03, + 0x11, 0x01, 0x13, 0x01, 0x13, 0x01, 0x11, 0x03, + 0x11, 0x03, + 0x11, 0x01, 0x13, 0x01, 0x11, 0x03, + 0x11, 0x01, 0x11, 0x01, 0x11, 0x01, 0x11, 0x07, + 0x13, 0x01, 0x13, 0x03, + 0x11, 0x01, 0x11, 0x03, + 0x13, 0x01, 0x11, 0x01, 0x13, 0x01, 0x11, 0x03, + 0x11, 0x01, 0x13, 0x01, 0x11, 0x03, + 0x13, 0x01, 0x13, 0x01, 0x13, 0x03, + 0x13, 0x01, 0x11, 0x01, 0x11, 0x03, + 0x11, 0x03, + 0x11, 0x01, 0x11, 0x01, 0x11, 0x01, 0x13, 0x07, + 0xff +}; + +static void banner(void) +{ + static int pos = 0; + static int count = 0; + + if (count) { + count--; + } else { + int val = banner_table[pos]; + if (val == 0xff) { + pos = 0; + val = banner_table[pos]; + } + pos++; + mach_led_d10((val >> 4) & 1); + count = 10 * (val & 0xf); + } +} + +/* From heartbeat_harp in the stboards directory */ +/* acts like an actual heart beat -- ie thump-thump-pause... */ +void microdev_heartbeat(void) +{ + static unsigned cnt = 0, period = 0, dist = 0; + + if (cnt == 0 || cnt == dist) + mach_led_d9(1); + else if (cnt == 7 || cnt == dist+7) + mach_led_d9(0); + + if (++cnt > period) { + cnt = 0; + /* The hyperbolic function below modifies the heartbeat period + * length in dependency of the current (5min) load. It goes + * through the points f(0)=126, f(1)=86, f(5)=51, + * f(inf)->30. */ + period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30; + dist = period / 4; + } + + banner(); +} + +#endif diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c new file mode 100644 index 00000000000..c18919941ec --- /dev/null +++ b/arch/sh/boards/superh/microdev/setup.c @@ -0,0 +1,278 @@ +/* + * arch/sh/boards/superh/microdev/setup.c + * + * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) + * Copyright (C) 2003, 2004 SuperH, Inc. + * Copyright (C) 2004 Paul Mundt + * + * SuperH SH4-202 MicroDev board support. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/ioport.h> +#include <asm/io.h> +#include <asm/mach/irq.h> +#include <asm/mach/io.h> +#include <asm/machvec.h> +#include <asm/machvec_init.h> + +extern void microdev_heartbeat(void); + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_sh4202_microdev __initmv = { + .mv_nr_irqs = 72, /* QQQ need to check this - use the MACRO */ + + .mv_inb = microdev_inb, + .mv_inw = microdev_inw, + .mv_inl = microdev_inl, + .mv_outb = microdev_outb, + .mv_outw = microdev_outw, + .mv_outl = microdev_outl, + + .mv_inb_p = microdev_inb_p, + .mv_inw_p = microdev_inw_p, + .mv_inl_p = microdev_inl_p, + .mv_outb_p = microdev_outb_p, + .mv_outw_p = microdev_outw_p, + .mv_outl_p = microdev_outl_p, + + .mv_insb = microdev_insb, + .mv_insw = microdev_insw, + .mv_insl = microdev_insl, + .mv_outsb = microdev_outsb, + .mv_outsw = microdev_outsw, + .mv_outsl = microdev_outsl, + + .mv_isa_port2addr = microdev_isa_port2addr, + + .mv_init_irq = init_microdev_irq, + +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = microdev_heartbeat, +#endif +}; +ALIAS_MV(sh4202_microdev) + +/****************************************************************************/ + + + /* + * Setup for the SMSC FDC37C93xAPM + */ +#define SMSC_CONFIG_PORT_ADDR (0x3F0) +#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR +#define SMSC_DATA_PORT_ADDR (SMSC_INDEX_PORT_ADDR + 1) + +#define SMSC_ENTER_CONFIG_KEY 0x55 +#define SMSC_EXIT_CONFIG_KEY 0xaa + +#define SMCS_LOGICAL_DEV_INDEX 0x07 /* Logical Device Number */ +#define SMSC_DEVICE_ID_INDEX 0x20 /* Device ID */ +#define SMSC_DEVICE_REV_INDEX 0x21 /* Device Revision */ +#define SMSC_ACTIVATE_INDEX 0x30 /* Activate */ +#define SMSC_PRIMARY_BASE_INDEX 0x60 /* Primary Base Address */ +#define SMSC_SECONDARY_BASE_INDEX 0x62 /* Secondary Base Address */ +#define SMSC_PRIMARY_INT_INDEX 0x70 /* Primary Interrupt Select */ +#define SMSC_SECONDARY_INT_INDEX 0x72 /* Secondary Interrupt Select */ +#define SMSC_HDCS0_INDEX 0xf0 /* HDCS0 Address Decoder */ +#define SMSC_HDCS1_INDEX 0xf1 /* HDCS1 Address Decoder */ + +#define SMSC_IDE1_DEVICE 1 /* IDE #1 logical device */ +#define SMSC_IDE2_DEVICE 2 /* IDE #2 logical device */ +#define SMSC_PARALLEL_DEVICE 3 /* Parallel Port logical device */ +#define SMSC_SERIAL1_DEVICE 4 /* Serial #1 logical device */ +#define SMSC_SERIAL2_DEVICE 5 /* Serial #2 logical device */ +#define SMSC_KEYBOARD_DEVICE 7 /* Keyboard logical device */ +#define SMSC_CONFIG_REGISTERS 8 /* Configuration Registers (Aux I/O) */ + +#define SMSC_READ_INDEXED(index) ({ \ + outb((index), SMSC_INDEX_PORT_ADDR); \ + inb(SMSC_DATA_PORT_ADDR); }) +#define SMSC_WRITE_INDEXED(val, index) ({ \ + outb((index), SMSC_INDEX_PORT_ADDR); \ + outb((val), SMSC_DATA_PORT_ADDR); }) + +#define IDE1_PRIMARY_BASE 0x01f0 /* Task File Registe base for IDE #1 */ +#define IDE1_SECONDARY_BASE 0x03f6 /* Miscellaneous AT registers for IDE #1 */ +#define IDE2_PRIMARY_BASE 0x0170 /* Task File Registe base for IDE #2 */ +#define IDE2_SECONDARY_BASE 0x0376 /* Miscellaneous AT registers for IDE #2 */ + +#define SERIAL1_PRIMARY_BASE 0x03f8 +#define SERIAL2_PRIMARY_BASE 0x02f8 + +#define MSB(x) ( (x) >> 8 ) +#define LSB(x) ( (x) & 0xff ) + + /* General-Purpose base address on CPU-board FPGA */ +#define MICRODEV_FPGA_GP_BASE 0xa6100000ul + + /* assume a Keyboard Controller is present */ +int microdev_kbd_controller_present = 1; + +const char *get_system_type(void) +{ + return "SH4-202 MicroDev"; +} + +static struct resource smc91x_resources[] = { + [0] = { + .start = 0x300, + .end = 0x300 + 0x0001000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MICRODEV_LINUX_IRQ_ETHERNET, + .end = MICRODEV_LINUX_IRQ_ETHERNET, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static int __init smc91x_setup(void) +{ + return platform_device_register(&smc91x_device); +} + +__initcall(smc91x_setup); + + /* + * Initialize the board + */ +void __init platform_setup(void) +{ + int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul); + const int fpgaRevision = *fpgaRevisionRegister; + int * const CacheControlRegister = (int*)CCR; + + printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n", + get_system_type(), fpgaRevision, *CacheControlRegister); +} + + +/****************************************************************************/ + + + /* + * Setup for the SMSC FDC37C93xAPM + */ +static int __init smsc_superio_setup(void) +{ + + unsigned char devid, devrev; + + /* Initially the chip is in run state */ + /* Put it into configuration state */ + outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); + + /* Read device ID info */ + devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX); + devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX); + if ( (devid==0x30) && (devrev==0x01) ) + { + printk("SMSC FDC37C93xAPM SuperIO device detected\n"); + } + else + { /* not the device identity we expected */ + printk("Not detected a SMSC FDC37C93xAPM SuperIO device (devid=0x%02x, rev=0x%02x)\n", + devid, devrev); + /* inform the keyboard driver that we have no keyboard controller */ + microdev_kbd_controller_present = 0; + /* little point in doing anything else in this functon */ + return 0; + } + + /* Select the keyboard device */ + SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX); + /* enable it */ + SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + /* enable the interrupts */ + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX); + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX); + + /* Select the Serial #1 device */ + SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX); + /* enable it */ + SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + /* program with port addresses */ + SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); + SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX); + /* enable the interrupts */ + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX); + + /* Select the Serial #2 device */ + SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX); + /* enable it */ + SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + /* program with port addresses */ + SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); + SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX); + /* enable the interrupts */ + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX); + + /* Select the IDE#1 device */ + SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX); + /* enable it */ + SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + /* program with port addresses */ + SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); + SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1); + SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX); + SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX); + /* select the interrupt */ + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX); + + /* Select the IDE#2 device */ + SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX); + /* enable it */ + SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + /* program with port addresses */ + SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); + SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1); + /* select the interrupt */ + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX); + + /* Select the configuration registers */ + SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX); + /* enable the appropriate GPIO pins for IDE functionality: + * bit[0] In/Out 1==input; 0==output + * bit[1] Polarity 1==invert; 0==no invert + * bit[2] Int Enb #1 1==Enable Combined IRQ #1; 0==disable + * bit[3:4] Function Select 00==original; 01==Alternate Function #1 + */ + SMSC_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */ + SMSC_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */ + SMSC_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */ + SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */ + SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */ + + /* Exit the configuraton state */ + outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); + + return 0; +} + + +/* This is grotty, but, because kernel is always referenced on the link line + * before any devices, this is safe. + */ +__initcall(smsc_superio_setup); diff --git a/arch/sh/boards/unknown/Makefile b/arch/sh/boards/unknown/Makefile new file mode 100644 index 00000000000..cffc21031e7 --- /dev/null +++ b/arch/sh/boards/unknown/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for unknown SH boards +# + +obj-y := mach.o io.o setup.o + diff --git a/arch/sh/boards/unknown/io.c b/arch/sh/boards/unknown/io.c new file mode 100644 index 00000000000..8f3f17267bd --- /dev/null +++ b/arch/sh/boards/unknown/io.c @@ -0,0 +1,46 @@ +/* + * linux/arch/sh/kernel/io_unknown.c + * + * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * I/O routine for unknown hardware. + */ + +static unsigned int unknown_handler(void) +{ + return 0; +} + +#define UNKNOWN_ALIAS(fn) \ + void unknown_##fn(void) __attribute__ ((alias ("unknown_handler"))); + +UNKNOWN_ALIAS(inb) +UNKNOWN_ALIAS(inw) +UNKNOWN_ALIAS(inl) +UNKNOWN_ALIAS(outb) +UNKNOWN_ALIAS(outw) +UNKNOWN_ALIAS(outl) +UNKNOWN_ALIAS(inb_p) +UNKNOWN_ALIAS(inw_p) +UNKNOWN_ALIAS(inl_p) +UNKNOWN_ALIAS(outb_p) +UNKNOWN_ALIAS(outw_p) +UNKNOWN_ALIAS(outl_p) +UNKNOWN_ALIAS(insb) +UNKNOWN_ALIAS(insw) +UNKNOWN_ALIAS(insl) +UNKNOWN_ALIAS(outsb) +UNKNOWN_ALIAS(outsw) +UNKNOWN_ALIAS(outsl) +UNKNOWN_ALIAS(readb) +UNKNOWN_ALIAS(readw) +UNKNOWN_ALIAS(readl) +UNKNOWN_ALIAS(writeb) +UNKNOWN_ALIAS(writew) +UNKNOWN_ALIAS(writel) +UNKNOWN_ALIAS(isa_port2addr) +UNKNOWN_ALIAS(ioremap) +UNKNOWN_ALIAS(iounmap) diff --git a/arch/sh/boards/unknown/mach.c b/arch/sh/boards/unknown/mach.c new file mode 100644 index 00000000000..ad0bcc60a64 --- /dev/null +++ b/arch/sh/boards/unknown/mach.c @@ -0,0 +1,67 @@ +/* + * linux/arch/sh/kernel/mach_unknown.c + * + * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Machine specific code for an unknown machine (internal peripherials only) + */ + +#include <linux/config.h> +#include <linux/init.h> + +#include <asm/machvec.h> +#include <asm/machvec_init.h> + +#include <asm/io_unknown.h> + +#include <asm/rtc.h> +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_unknown __initmv = { +#if defined(CONFIG_CPU_SH4) + .mv_nr_irqs = 48, +#elif defined(CONFIG_CPU_SUBTYPE_SH7708) + .mv_nr_irqs = 32, +#elif defined(CONFIG_CPU_SUBTYPE_SH7709) + .mv_nr_irqs = 61, +#endif + + .mv_inb = unknown_inb, + .mv_inw = unknown_inw, + .mv_inl = unknown_inl, + .mv_outb = unknown_outb, + .mv_outw = unknown_outw, + .mv_outl = unknown_outl, + + .mv_inb_p = unknown_inb_p, + .mv_inw_p = unknown_inw_p, + .mv_inl_p = unknown_inl_p, + .mv_outb_p = unknown_outb_p, + .mv_outw_p = unknown_outw_p, + .mv_outl_p = unknown_outl_p, + + .mv_insb = unknown_insb, + .mv_insw = unknown_insw, + .mv_insl = unknown_insl, + .mv_outsb = unknown_outsb, + .mv_outsw = unknown_outsw, + .mv_outsl = unknown_outsl, + + .mv_readb = unknown_readb, + .mv_readw = unknown_readw, + .mv_readl = unknown_readl, + .mv_writeb = unknown_writeb, + .mv_writew = unknown_writew, + .mv_writel = unknown_writel, + + .mv_ioremap = unknown_ioremap, + .mv_iounmap = unknown_iounmap, + + .mv_isa_port2addr = unknown_isa_port2addr, +}; +ALIAS_MV(unknown) diff --git a/arch/sh/boards/unknown/setup.c b/arch/sh/boards/unknown/setup.c new file mode 100644 index 00000000000..7d772a6f886 --- /dev/null +++ b/arch/sh/boards/unknown/setup.c @@ -0,0 +1,23 @@ +/* + * linux/arch/sh/boards/unknown/setup.c + * + * Copyright (C) 2002 Paul Mundt + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Setup code for an unknown machine (internal peripherials only) + */ + +#include <linux/config.h> +#include <linux/init.h> + +const char *get_system_type(void) +{ + return "Unknown"; +} + +void __init platform_setup(void) +{ +} + diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile new file mode 100644 index 00000000000..60797b31089 --- /dev/null +++ b/arch/sh/boot/Makefile @@ -0,0 +1,20 @@ +# +# arch/sh/boot/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1999 Stuart Menefy +# + +targets := zImage +subdir- := compressed + +$(obj)/zImage: $(obj)/compressed/vmlinux FORCE + $(call if_changed,objcopy) + @echo 'Kernel: $@ is ready' + +$(obj)/compressed/vmlinux: FORCE + $(Q)$(MAKE) $(build)=$(obj)/compressed $@ + diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile new file mode 100644 index 00000000000..75a6876bf6c --- /dev/null +++ b/arch/sh/boot/compressed/Makefile @@ -0,0 +1,41 @@ +# +# linux/arch/sh/boot/compressed/Makefile +# +# create a compressed vmlinux image from the original vmlinux +# + +targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o +EXTRA_AFLAGS := -traditional + +OBJECTS = $(obj)/head.o $(obj)/misc.o + +ifdef CONFIG_SH_STANDARD_BIOS +OBJECTS += $(obj)/../../kernel/sh_bios.o +endif + +# +# IMAGE_OFFSET is the load offset of the compression loader +# Assign dummy values if these 2 variables are not defined, +# in order to suppress error message. +# +CONFIG_MEMORY_START ?= 0x0c000000 +CONFIG_BOOT_LINK_OFFSET ?= 0x00800000 +IMAGE_OFFSET := $(shell printf "0x%8x" $$[0x80000000+$(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET)]) + +LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup -T $(obj)/../../kernel/vmlinux.lds + +$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE + $(call if_changed,ld) + @: + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) + +LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh-linux -T +OBJCOPYFLAGS += -R .empty_zero_page + +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,ld) diff --git a/arch/sh/boot/compressed/head.S b/arch/sh/boot/compressed/head.S new file mode 100644 index 00000000000..88db04d325f --- /dev/null +++ b/arch/sh/boot/compressed/head.S @@ -0,0 +1,120 @@ +/* + * linux/arch/sh/boot/compressed/head.S + * + * Copyright (C) 1999 Stuart Menefy + * Copyright (C) 2003 SUGIOKA Toshinobu + */ + +.text + +#include <linux/config.h> +#include <linux/linkage.h> + + .global startup +startup: + /* Load initial status register */ + mov.l init_sr, r1 + ldc r1, sr + + /* Move myself to proper location if necessary */ + mova 1f, r0 + mov.l 1f, r2 + cmp/eq r2, r0 + bt clear_bss + sub r0, r2 + mov.l bss_start_addr, r0 + mov #0xe0, r1 + and r1, r0 ! align cache line + mov.l text_start_addr, r3 + mov r0, r1 + sub r2, r1 +3: + mov.l @r1, r4 + mov.l @(4,r1), r5 + mov.l @(8,r1), r6 + mov.l @(12,r1), r7 + mov.l @(16,r1), r8 + mov.l @(20,r1), r9 + mov.l @(24,r1), r10 + mov.l @(28,r1), r11 + mov.l r4, @r0 + mov.l r5, @(4,r0) + mov.l r6, @(8,r0) + mov.l r7, @(12,r0) + mov.l r8, @(16,r0) + mov.l r9, @(20,r0) + mov.l r10, @(24,r0) + mov.l r11, @(28,r0) +#ifdef CONFIG_CPU_SH4 + ocbwb @r0 +#endif + cmp/hi r3, r0 + add #-32, r0 + bt/s 3b + add #-32, r1 + mov.l 2f, r0 + jmp @r0 + nop + + .align 2 +1: .long 1b +2: .long clear_bss +text_start_addr: + .long startup + + /* Clear BSS */ +clear_bss: + mov.l end_addr, r1 + mov.l bss_start_addr, r2 + mov #0, r0 +l1: + mov.l r0, @-r1 + cmp/eq r1,r2 + bf l1 + + /* Set the initial pointer. */ + mov.l init_stack_addr, r0 + mov.l @r0, r15 + + /* Decompress the kernel */ + mov.l decompress_kernel_addr, r0 + jsr @r0 + nop + + /* Jump to the start of the decompressed kernel */ + mov.l kernel_start_addr, r0 + jmp @r0 + nop + + .align 2 +bss_start_addr: + .long __bss_start +end_addr: + .long _end +init_sr: + .long 0x400000F0 /* Privileged mode, Bank=0, Block=0, IMASK=0xF */ +init_stack_addr: + .long stack_start +decompress_kernel_addr: + .long decompress_kernel +kernel_start_addr: + .long _text+0x1000 + + .align 9 +fake_headers_as_bzImage: + .word 0 + .ascii "HdrS" ! header signature + .word 0x0202 ! header version number (>= 0x0105) + ! or else old loadlin-1.5 will fail) + .word 0 ! default_switch + .word 0 ! SETUPSEG + .word 0x1000 + .word 0 ! pointing to kernel version string + .byte 0 ! = 0, old one (LILO, Loadlin, + ! 0xTV: T=0 for LILO + ! V = version + .byte 1 ! Load flags bzImage=1 + .word 0x8000 ! size to move, when setup is not + .long 0x100000 ! 0x100000 = default for big kernel + .long 0 ! address of loaded ramdisk image + .long 0 # its size in bytes diff --git a/arch/sh/boot/compressed/install.sh b/arch/sh/boot/compressed/install.sh new file mode 100644 index 00000000000..90589f0fec1 --- /dev/null +++ b/arch/sh/boot/compressed/install.sh @@ -0,0 +1,56 @@ +#!/bin/sh +# +# arch/sh/boot/install.sh +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1995 by Linus Torvalds +# +# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin +# Adapted from code in arch/i386/boot/install.sh by Russell King +# Adapted from code in arch/arm/boot/install.sh by Stuart Menefy +# +# "make install" script for sh architecture +# +# Arguments: +# $1 - kernel version +# $2 - kernel image file +# $3 - kernel map file +# $4 - default install path (blank if root directory) +# + +# User may have a custom install script + +if [ -x /sbin/installkernel ]; then + exec /sbin/installkernel "$@" +fi + +if [ "$2" = "zImage" ]; then +# Compressed install + echo "Installing compressed kernel" + if [ -f $4/vmlinuz-$1 ]; then + mv $4/vmlinuz-$1 $4/vmlinuz.old + fi + + if [ -f $4/System.map-$1 ]; then + mv $4/System.map-$1 $4/System.old + fi + + cat $2 > $4/vmlinuz-$1 + cp $3 $4/System.map-$1 +else +# Normal install + echo "Installing normal kernel" + if [ -f $4/vmlinux-$1 ]; then + mv $4/vmlinux-$1 $4/vmlinux.old + fi + + if [ -f $4/System.map ]; then + mv $4/System.map $4/System.old + fi + + cat $2 > $4/vmlinux-$1 + cp $3 $4/System.map +fi diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c new file mode 100644 index 00000000000..211e9110074 --- /dev/null +++ b/arch/sh/boot/compressed/misc.c @@ -0,0 +1,240 @@ +/* + * arch/sh/boot/compressed/misc.c + * + * This is a collection of several routines from gzip-1.0.3 + * adapted for Linux. + * + * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 + * + * Adapted for SH by Stuart Menefy, Aug 1999 + * + * Modified to use standard LinuxSH BIOS by Greg Banks 7Jul2000 + */ + +#include <linux/config.h> +#include <asm/uaccess.h> +#ifdef CONFIG_SH_STANDARD_BIOS +#include <asm/sh_bios.h> +#endif + +/* + * gzip declarations + */ + +#define OF(args) args +#define STATIC static + +#undef memset +#undef memcpy +#define memzero(s, n) memset ((s), 0, (n)) + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + +#define WSIZE 0x8000 /* Window size must be at least 32k, */ + /* and a power of two */ + +static uch *inbuf; /* input buffer */ +static uch window[WSIZE]; /* Sliding window buffer */ + +static unsigned insize = 0; /* valid bytes in inbuf */ +static unsigned inptr = 0; /* index of next byte to be processed in inbuf */ +static unsigned outcnt = 0; /* bytes in output buffer */ + +/* gzip flag byte */ +#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ +#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ +#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ +#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ +#define COMMENT 0x10 /* bit 4 set: file comment present */ +#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ +#define RESERVED 0xC0 /* bit 6,7: reserved */ + +#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) + +/* Diagnostic functions */ +#ifdef DEBUG +# define Assert(cond,msg) {if(!(cond)) error(msg);} +# define Trace(x) fprintf x +# define Tracev(x) {if (verbose) fprintf x ;} +# define Tracevv(x) {if (verbose>1) fprintf x ;} +# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} +# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + +static int fill_inbuf(void); +static void flush_window(void); +static void error(char *m); +static void gzip_mark(void **); +static void gzip_release(void **); + +extern char input_data[]; +extern int input_len; + +static long bytes_out = 0; +static uch *output_data; +static unsigned long output_ptr = 0; + +static void *malloc(int size); +static void free(void *where); +static void error(char *m); +static void gzip_mark(void **); +static void gzip_release(void **); + +int puts(const char *); + +extern int _text; /* Defined in vmlinux.lds.S */ +extern int _end; +static unsigned long free_mem_ptr; +static unsigned long free_mem_end_ptr; + +#define HEAP_SIZE 0x10000 + +#include "../../../../lib/inflate.c" + +static void *malloc(int size) +{ + void *p; + + if (size <0) error("Malloc error"); + if (free_mem_ptr == 0) error("Memory error"); + + free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ + + p = (void *)free_mem_ptr; + free_mem_ptr += size; + + if (free_mem_ptr >= free_mem_end_ptr) + error("Out of memory"); + + return p; +} + +static void free(void *where) +{ /* Don't care */ +} + +static void gzip_mark(void **ptr) +{ + *ptr = (void *) free_mem_ptr; +} + +static void gzip_release(void **ptr) +{ + free_mem_ptr = (long) *ptr; +} + +#ifdef CONFIG_SH_STANDARD_BIOS +size_t strlen(const char *s) +{ + int i = 0; + + while (*s++) + i++; + return i; +} + +int puts(const char *s) +{ + int len = strlen(s); + sh_bios_console_write(s, len); + return len; +} +#else +int puts(const char *s) +{ + /* This should be updated to use the sh-sci routines */ + return 0; +} +#endif + +void* memset(void* s, int c, size_t n) +{ + int i; + char *ss = (char*)s; + + for (i=0;i<n;i++) ss[i] = c; + return s; +} + +void* memcpy(void* __dest, __const void* __src, + size_t __n) +{ + int i; + char *d = (char *)__dest, *s = (char *)__src; + + for (i=0;i<__n;i++) d[i] = s[i]; + return __dest; +} + +/* =========================================================================== + * Fill the input buffer. This is called only when the buffer is empty + * and at least one byte is really needed. + */ +static int fill_inbuf(void) +{ + if (insize != 0) { + error("ran out of input data"); + } + + inbuf = input_data; + insize = input_len; + inptr = 1; + return inbuf[0]; +} + +/* =========================================================================== + * Write the output window window[0..outcnt-1] and update crc and bytes_out. + * (Used for the decompressed data only.) + */ +static void flush_window(void) +{ + ulg c = crc; /* temporary variable */ + unsigned n; + uch *in, *out, ch; + + in = window; + out = &output_data[output_ptr]; + for (n = 0; n < outcnt; n++) { + ch = *out++ = *in++; + c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); + } + crc = c; + bytes_out += (ulg)outcnt; + output_ptr += (ulg)outcnt; + outcnt = 0; +} + +static void error(char *x) +{ + puts("\n\n"); + puts(x); + puts("\n\n -- System halted"); + + while(1); /* Halt */ +} + +#define STACK_SIZE (4096) +long user_stack [STACK_SIZE]; +long* stack_start = &user_stack[STACK_SIZE]; + +void decompress_kernel(void) +{ + output_data = 0; + output_ptr = (unsigned long)&_text+0x20001000; + free_mem_ptr = (unsigned long)&_end; + free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; + + makecrc(); + puts("Uncompressing Linux... "); + gunzip(); + puts("Ok, booting the kernel.\n"); +} diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr new file mode 100644 index 00000000000..1ed9d791f86 --- /dev/null +++ b/arch/sh/boot/compressed/vmlinux.scr @@ -0,0 +1,9 @@ +SECTIONS +{ + .data : { + input_len = .; + LONG(input_data_end - input_data) input_data = .; + *(.data) + input_data_end = .; + } +} diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig new file mode 100644 index 00000000000..155d139884c --- /dev/null +++ b/arch/sh/cchips/Kconfig @@ -0,0 +1,96 @@ +menu "Companion Chips" + +config VOYAGERGX + bool "VoyagerGX chip support" + depends on SH_RTS7751R2D + help + Selecting this option will support Silicon Motion, Inc. SM501. + Designed to complement needs for the embedded industry, it + provides video and 2D capability. To reduce system cost a + wide variety of include I/O is supported, including analog RGB + and digital LCD Panel interface, 8-bit parallel interface, USB, + UART, IrDA, Zoom Video, AC97 or I2S, SSP, PWM, and I2C. There + are additional GPIO bits that can be used to interface to + external as well. + +# A board must have defined HD6446X_SERIES in order to see these +config HD6446X_SERIES + bool "HD6446x support" + default n + +choice + prompt "HD6446x options" + depends on HD6446X_SERIES + default HD64461 + +config HD64461 + bool "Hitachi HD64461 companion chip support" + depends on CPU_SUBTYPE_SH7709 + ---help--- + The Hitachi HD64461 provides an interface for + the SH7709 CPU, supporting a LCD controller, + CRT color controller, IrDA up to 4 Mbps, and a + PCMCIA controller supporting 2 slots. + + More information is available at + <http://semiconductor.hitachi.com/windowsce/superh/sld013.htm>. + + Say Y if you want support for the HD64461. + Otherwise, say N. + +config HD64465 + bool "Hitachi HD64465 companion chip support" + depends on CPU_SUBTYPE_SH7750 + ---help--- + The Hitachi HD64465 provides an interface for + the SH7750 CPU, supporting a LCD controller, + CRT color controller, IrDA, USB, PCMCIA, + keyboard controller, and a printer interface. + + More information is available at + <http://global.hitachi.com/New/cnews/E/1998/981019B.html>. + + Say Y if you want support for the HD64465. + Otherwise, say N. + +endchoice + +# These will also be split into the Kconfig's below +config HD64461_IRQ + int "HD64461 IRQ" + depends on HD64461 + default "36" + help + The default setting of the HD64461 IRQ is 36. + + Do not change this unless you know what you are doing. + +config HD64461_ENABLER + bool "HD64461 PCMCIA enabler" + depends on HD64461 + help + Say Y here if you want to enable PCMCIA support + via the HD64461 companion chip. + Otherwise, say N. + + +config HD64465_IOBASE + hex "HD64465 start address" + depends on HD64465 + default "0xb0000000" + help + The default setting of the HD64465 IO base address is 0xb0000000. + + Do not change this unless you know what you are doing. + +config HD64465_IRQ + int "HD64465 IRQ" + depends on HD64465 + default "5" + help + The default setting of the HD64465 IRQ is 5. + + Do not change this unless you know what you are doing. + +endmenu + diff --git a/arch/sh/cchips/hd6446x/hd64461/Makefile b/arch/sh/cchips/hd6446x/hd64461/Makefile new file mode 100644 index 00000000000..bff4b92e388 --- /dev/null +++ b/arch/sh/cchips/hd6446x/hd64461/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the HD64461 +# + +obj-y := setup.o io.o + diff --git a/arch/sh/cchips/hd6446x/hd64461/io.c b/arch/sh/cchips/hd6446x/hd64461/io.c new file mode 100644 index 00000000000..4c062d6b7a9 --- /dev/null +++ b/arch/sh/cchips/hd6446x/hd64461/io.c @@ -0,0 +1,157 @@ +/* + * $Id: io.c,v 1.6 2004/03/16 00:07:50 lethal Exp $ + * Copyright (C) 2000 YAEGASHI Takeshi + * Typical I/O routines for HD64461 system. + */ + +#include <linux/config.h> +#include <asm/io.h> +#include <asm/hd64461/hd64461.h> + +#define MEM_BASE (CONFIG_HD64461_IOBASE - HD64461_STBCR) + +static __inline__ unsigned long PORT2ADDR(unsigned long port) +{ + /* 16550A: HD64461 internal */ + if (0x3f8<=port && port<=0x3ff) + return CONFIG_HD64461_IOBASE + 0x8000 + ((port-0x3f8)<<1); + if (0x2f8<=port && port<=0x2ff) + return CONFIG_HD64461_IOBASE + 0x7000 + ((port-0x2f8)<<1); + +#ifdef CONFIG_HD64461_ENABLER + /* NE2000: HD64461 PCMCIA channel 0 (I/O) */ + if (0x300<=port && port<=0x31f) + return 0xba000000 + port; + + /* ide0: HD64461 PCMCIA channel 1 (memory) */ + /* On HP690, CF in slot 1 is configured as a memory card + device. See CF+ and CompactFlash Specification for the + detail of CF's memory mapped addressing. */ + if (0x1f0<=port && port<=0x1f7) return 0xb5000000 + port; + if (port == 0x3f6) return 0xb50001fe; + if (port == 0x3f7) return 0xb50001ff; + + /* ide1 */ + if (0x170<=port && port<=0x177) return 0xba000000 + port; + if (port == 0x376) return 0xba000376; + if (port == 0x377) return 0xba000377; +#endif + + /* ??? */ + if (port < 0xf000) return 0xa0000000 + port; + /* PCMCIA channel 0, I/O (0xba000000) */ + if (port < 0x10000) return 0xba000000 + port - 0xf000; + + /* HD64461 internal devices (0xb0000000) */ + if (port < 0x20000) return CONFIG_HD64461_IOBASE + port - 0x10000; + + /* PCMCIA channel 0, I/O (0xba000000) */ + if (port < 0x30000) return 0xba000000 + port - 0x20000; + + /* PCMCIA channel 1, memory (0xb5000000) */ + if (port < 0x40000) return 0xb5000000 + port - 0x30000; + + /* Whole physical address space (0xa0000000) */ + return 0xa0000000 + (port & 0x1fffffff); +} + +static inline void delay(void) +{ + ctrl_inw(0xa0000000); +} + +unsigned char hd64461_inb(unsigned long port) +{ + return *(volatile unsigned char*)PORT2ADDR(port); +} + +unsigned char hd64461_inb_p(unsigned long port) +{ + unsigned long v = *(volatile unsigned char*)PORT2ADDR(port); + delay(); + return v; +} + +unsigned short hd64461_inw(unsigned long port) +{ + return *(volatile unsigned short*)PORT2ADDR(port); +} + +unsigned int hd64461_inl(unsigned long port) +{ + return *(volatile unsigned long*)PORT2ADDR(port); +} + +void hd64461_outb(unsigned char b, unsigned long port) +{ + *(volatile unsigned char*)PORT2ADDR(port) = b; +} + +void hd64461_outb_p(unsigned char b, unsigned long port) +{ + *(volatile unsigned char*)PORT2ADDR(port) = b; + delay(); +} + +void hd64461_outw(unsigned short b, unsigned long port) +{ + *(volatile unsigned short*)PORT2ADDR(port) = b; +} + +void hd64461_outl(unsigned int b, unsigned long port) +{ + *(volatile unsigned long*)PORT2ADDR(port) = b; +} + +void hd64461_insb(unsigned long port, void *buffer, unsigned long count) +{ + volatile unsigned char* addr=(volatile unsigned char*)PORT2ADDR(port); + unsigned char *buf=buffer; + while(count--) *buf++=*addr; +} + +void hd64461_insw(unsigned long port, void *buffer, unsigned long count) +{ + volatile unsigned short* addr=(volatile unsigned short*)PORT2ADDR(port); + unsigned short *buf=buffer; + while(count--) *buf++=*addr; +} + +void hd64461_insl(unsigned long port, void *buffer, unsigned long count) +{ + volatile unsigned long* addr=(volatile unsigned long*)PORT2ADDR(port); + unsigned long *buf=buffer; + while(count--) *buf++=*addr; +} + +void hd64461_outsb(unsigned long port, const void *buffer, unsigned long count) +{ + volatile unsigned char* addr=(volatile unsigned char*)PORT2ADDR(port); + const unsigned char *buf=buffer; + while(count--) *addr=*buf++; +} + +void hd64461_outsw(unsigned long port, const void *buffer, unsigned long count) +{ + volatile unsigned short* addr=(volatile unsigned short*)PORT2ADDR(port); + const unsigned short *buf=buffer; + while(count--) *addr=*buf++; +} + +void hd64461_outsl(unsigned long port, const void *buffer, unsigned long count) +{ + volatile unsigned long* addr=(volatile unsigned long*)PORT2ADDR(port); + const unsigned long *buf=buffer; + while(count--) *addr=*buf++; +} + +unsigned short hd64461_readw(unsigned long addr) +{ + return *(volatile unsigned short*)(MEM_BASE+addr); +} + +void hd64461_writew(unsigned short b, unsigned long addr) +{ + *(volatile unsigned short*)(MEM_BASE+addr) = b; +} + diff --git a/arch/sh/cchips/hd6446x/hd64461/setup.c b/arch/sh/cchips/hd6446x/hd64461/setup.c new file mode 100644 index 00000000000..f014b9bf692 --- /dev/null +++ b/arch/sh/cchips/hd6446x/hd64461/setup.c @@ -0,0 +1,171 @@ +/* + * $Id: setup.c,v 1.5 2004/03/16 00:07:50 lethal Exp $ + * Copyright (C) 2000 YAEGASHI Takeshi + * Hitachi HD64461 companion chip support + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/io.h> +#include <asm/irq.h> + +#include <asm/hd64461/hd64461.h> + +static void disable_hd64461_irq(unsigned int irq) +{ + unsigned long flags; + unsigned short nimr; + unsigned short mask = 1 << (irq - HD64461_IRQBASE); + + local_irq_save(flags); + nimr = inw(HD64461_NIMR); + nimr |= mask; + outw(nimr, HD64461_NIMR); + local_irq_restore(flags); +} + +static void enable_hd64461_irq(unsigned int irq) +{ + unsigned long flags; + unsigned short nimr; + unsigned short mask = 1 << (irq - HD64461_IRQBASE); + + local_irq_save(flags); + nimr = inw(HD64461_NIMR); + nimr &= ~mask; + outw(nimr, HD64461_NIMR); + local_irq_restore(flags); +} + +static void mask_and_ack_hd64461(unsigned int irq) +{ + disable_hd64461_irq(irq); +#ifdef CONFIG_HD64461_ENABLER + if (irq == HD64461_IRQBASE + 13) + outb(0x00, HD64461_PCC1CSCR); +#endif +} + +static void end_hd64461_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_hd64461_irq(irq); +} + +static unsigned int startup_hd64461_irq(unsigned int irq) +{ + enable_hd64461_irq(irq); + return 0; +} + +static void shutdown_hd64461_irq(unsigned int irq) +{ + disable_hd64461_irq(irq); +} + +static struct hw_interrupt_type hd64461_irq_type = { + .typename = "HD64461-IRQ", + .startup = startup_hd64461_irq, + .shutdown = shutdown_hd64461_irq, + .enable = enable_hd64461_irq, + .disable = disable_hd64461_irq, + .ack = mask_and_ack_hd64461, + .end = end_hd64461_irq, +}; + +static irqreturn_t hd64461_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + printk(KERN_INFO + "HD64461: spurious interrupt, nirr: 0x%x nimr: 0x%x\n", + inw(HD64461_NIRR), inw(HD64461_NIMR)); + + return IRQ_NONE; +} + +static struct { + int (*func) (int, void *); + void *dev; +} hd64461_demux[HD64461_IRQ_NUM]; + +void hd64461_register_irq_demux(int irq, + int (*demux) (int irq, void *dev), void *dev) +{ + hd64461_demux[irq - HD64461_IRQBASE].func = demux; + hd64461_demux[irq - HD64461_IRQBASE].dev = dev; +} + +EXPORT_SYMBOL(hd64461_register_irq_demux); + +void hd64461_unregister_irq_demux(int irq) +{ + hd64461_demux[irq - HD64461_IRQBASE].func = 0; +} + +EXPORT_SYMBOL(hd64461_unregister_irq_demux); + +int hd64461_irq_demux(int irq) +{ + if (irq == CONFIG_HD64461_IRQ) { + unsigned short bit; + unsigned short nirr = inw(HD64461_NIRR); + unsigned short nimr = inw(HD64461_NIMR); + int i; + + nirr &= ~nimr; + for (bit = 1, i = 0; i < 16; bit <<= 1, i++) + if (nirr & bit) + break; + if (i == 16) + irq = CONFIG_HD64461_IRQ; + else { + irq = HD64461_IRQBASE + i; + if (hd64461_demux[i].func != 0) { + irq = hd64461_demux[i].func(irq, hd64461_demux[i].dev); + } + } + } + return __irq_demux(irq); +} + +static struct irqaction irq0 = { hd64461_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "HD64461", NULL, NULL }; + +int __init setup_hd64461(void) +{ + int i; + + if (!MACH_HD64461) + return 0; + + printk(KERN_INFO + "HD64461 configured at 0x%x on irq %d(mapped into %d to %d)\n", + CONFIG_HD64461_IOBASE, CONFIG_HD64461_IRQ, HD64461_IRQBASE, + HD64461_IRQBASE + 15); + +#if defined(CONFIG_CPU_SUBTYPE_SH7709) /* Should be at processor specific part.. */ + outw(0x2240, INTC_ICR1); +#endif + outw(0xffff, HD64461_NIMR); + + for (i = HD64461_IRQBASE; i < HD64461_IRQBASE + 16; i++) { + irq_desc[i].handler = &hd64461_irq_type; + } + + setup_irq(CONFIG_HD64461_IRQ, &irq0); + +#ifdef CONFIG_HD64461_ENABLER + printk(KERN_INFO "HD64461: enabling PCMCIA devices\n"); + outb(0x4c, HD64461_PCC1CSCIER); + outb(0x00, HD64461_PCC1CSCR); +#endif + + return 0; +} + +module_init(setup_hd64461); diff --git a/arch/sh/cchips/hd6446x/hd64465/Makefile b/arch/sh/cchips/hd6446x/hd64465/Makefile new file mode 100644 index 00000000000..f66edcb52c5 --- /dev/null +++ b/arch/sh/cchips/hd6446x/hd64465/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the HD64465 +# + +obj-y := setup.o io.o gpio.o + diff --git a/arch/sh/cchips/hd6446x/hd64465/gpio.c b/arch/sh/cchips/hd6446x/hd64465/gpio.c new file mode 100644 index 00000000000..9785fdef868 --- /dev/null +++ b/arch/sh/cchips/hd6446x/hd64465/gpio.c @@ -0,0 +1,196 @@ +/* + * $Id: gpio.c,v 1.4 2003/05/19 22:24:18 lethal Exp $ + * by Greg Banks <gbanks@pocketpenguins.com> + * (c) 2000 PocketPenguins Inc + * + * GPIO pin support for HD64465 companion chip. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <asm/io.h> +#include <asm/hd64465/gpio.h> + +#define _PORTOF(portpin) (((portpin)>>3)&0x7) +#define _PINOF(portpin) ((portpin)&0x7) + +/* Register addresses parametrised on port */ +#define GPIO_CR(port) (HD64465_REG_GPACR+((port)<<1)) +#define GPIO_DR(port) (HD64465_REG_GPADR+((port)<<1)) +#define GPIO_ICR(port) (HD64465_REG_GPAICR+((port)<<1)) +#define GPIO_ISR(port) (HD64465_REG_GPAISR+((port)<<1)) + +#define GPIO_NPORTS 5 + +#define MODNAME "hd64465_gpio" + +EXPORT_SYMBOL(hd64465_gpio_configure); +EXPORT_SYMBOL(hd64465_gpio_get_pin); +EXPORT_SYMBOL(hd64465_gpio_get_port); +EXPORT_SYMBOL(hd64465_gpio_register_irq); +EXPORT_SYMBOL(hd64465_gpio_set_pin); +EXPORT_SYMBOL(hd64465_gpio_set_port); +EXPORT_SYMBOL(hd64465_gpio_unregister_irq); + +/* TODO: each port should be protected with a spinlock */ + + +void hd64465_gpio_configure(int portpin, int direction) +{ + unsigned short cr; + unsigned int shift = (_PINOF(portpin)<<1); + + cr = inw(GPIO_CR(_PORTOF(portpin))); + cr &= ~(3<<shift); + cr |= direction<<shift; + outw(cr, GPIO_CR(_PORTOF(portpin))); +} + +void hd64465_gpio_set_pin(int portpin, unsigned int value) +{ + unsigned short d; + unsigned short mask = 1<<(_PINOF(portpin)); + + d = inw(GPIO_DR(_PORTOF(portpin))); + if (value) + d |= mask; + else + d &= ~mask; + outw(d, GPIO_DR(_PORTOF(portpin))); +} + +unsigned int hd64465_gpio_get_pin(int portpin) +{ + return inw(GPIO_DR(_PORTOF(portpin))) & (1<<(_PINOF(portpin))); +} + +/* TODO: for cleaner atomicity semantics, add a mask to this routine */ + +void hd64465_gpio_set_port(int port, unsigned int value) +{ + outw(value, GPIO_DR(port)); +} + +unsigned int hd64465_gpio_get_port(int port) +{ + return inw(GPIO_DR(port)); +} + + +static struct { + void (*func)(int portpin, void *dev); + void *dev; +} handlers[GPIO_NPORTS * 8]; + +static irqreturn_t hd64465_gpio_interrupt(int irq, void *dev, struct pt_regs *regs) +{ + unsigned short port, pin, isr, mask, portpin; + + for (port=0 ; port<GPIO_NPORTS ; port++) { + isr = inw(GPIO_ISR(port)); + + for (pin=0 ; pin<8 ; pin++) { + mask = 1<<pin; + if (isr & mask) { + portpin = (port<<3)|pin; + if (handlers[portpin].func != 0) + handlers[portpin].func(portpin, handlers[portpin].dev); + else + printk(KERN_NOTICE "unexpected GPIO interrupt, pin %c%d\n", + port+'A', (int)pin); + } + } + + /* Write 1s back to ISR to clear it? That's what the manual says.. */ + outw(isr, GPIO_ISR(port)); + } + + return IRQ_HANDLED; +} + +void hd64465_gpio_register_irq(int portpin, int mode, + void (*handler)(int portpin, void *dev), void *dev) +{ + unsigned long flags; + unsigned short icr, mask; + + if (handler == 0) + return; + + local_irq_save(flags); + + handlers[portpin].func = handler; + handlers[portpin].dev = dev; + + /* + * Configure Interrupt Control Register + */ + icr = inw(GPIO_ICR(_PORTOF(portpin))); + mask = (1<<_PINOF(portpin)); + + /* unmask interrupt */ + icr &= ~mask; + + /* set TS bit */ + mask <<= 8; + icr &= ~mask; + if (mode == HD64465_GPIO_RISING) + icr |= mask; + + outw(icr, GPIO_ICR(_PORTOF(portpin))); + + local_irq_restore(flags); +} + +void hd64465_gpio_unregister_irq(int portpin) +{ + unsigned long flags; + unsigned short icr; + + local_irq_save(flags); + + /* + * Configure Interrupt Control Register + */ + icr = inw(GPIO_ICR(_PORTOF(portpin))); + icr |= (1<<_PINOF(portpin)); /* mask interrupt */ + outw(icr, GPIO_ICR(_PORTOF(portpin))); + + handlers[portpin].func = 0; + handlers[portpin].dev = 0; + + local_irq_restore(flags); +} + +static int __init hd64465_gpio_init(void) +{ + if (!request_region(HD64465_REG_GPACR, 0x1000, MODNAME)) + return -EBUSY; + if (request_irq(HD64465_IRQ_GPIO, hd64465_gpio_interrupt, + SA_INTERRUPT, MODNAME, 0)) + goto out_irqfailed; + + printk("HD64465 GPIO layer on irq %d\n", HD64465_IRQ_GPIO); + + return 0; + +out_irqfailed: + release_region(HD64465_REG_GPACR, 0x1000); + + return -EINVAL; +} + +static void __exit hd64465_gpio_exit(void) +{ + release_region(HD64465_REG_GPACR, 0x1000); + free_irq(HD64465_IRQ_GPIO, 0); +} + +module_init(hd64465_gpio_init); +module_exit(hd64465_gpio_exit); + +MODULE_LICENSE("GPL"); + diff --git a/arch/sh/cchips/hd6446x/hd64465/io.c b/arch/sh/cchips/hd6446x/hd64465/io.c new file mode 100644 index 00000000000..99ac709c550 --- /dev/null +++ b/arch/sh/cchips/hd6446x/hd64465/io.c @@ -0,0 +1,216 @@ +/* + * $Id: io.c,v 1.4 2003/08/03 03:05:10 lethal Exp $ + * by Greg Banks <gbanks@pocketpenguins.com> + * (c) 2000 PocketPenguins Inc + * + * Derived from io_hd64461.c, which bore the message: + * Copyright (C) 2000 YAEGASHI Takeshi + * + * Typical I/O routines for HD64465 system. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <asm/io.h> +#include <asm/hd64465/hd64465.h> + + +#define HD64465_DEBUG 0 + +#if HD64465_DEBUG +#define DPRINTK(args...) printk(args) +#define DIPRINTK(n, args...) if (hd64465_io_debug>(n)) printk(args) +#else +#define DPRINTK(args...) +#define DIPRINTK(n, args...) +#endif + + + +/* This is a hack suitable only for debugging IO port problems */ +int hd64465_io_debug; +EXPORT_SYMBOL(hd64465_io_debug); + +/* Low iomap maps port 0-1K to addresses in 8byte chunks */ +#define HD64465_IOMAP_LO_THRESH 0x400 +#define HD64465_IOMAP_LO_SHIFT 3 +#define HD64465_IOMAP_LO_MASK ((1<<HD64465_IOMAP_LO_SHIFT)-1) +#define HD64465_IOMAP_LO_NMAP (HD64465_IOMAP_LO_THRESH>>HD64465_IOMAP_LO_SHIFT) +static unsigned long hd64465_iomap_lo[HD64465_IOMAP_LO_NMAP]; +static unsigned char hd64465_iomap_lo_shift[HD64465_IOMAP_LO_NMAP]; + +/* High iomap maps port 1K-64K to addresses in 1K chunks */ +#define HD64465_IOMAP_HI_THRESH 0x10000 +#define HD64465_IOMAP_HI_SHIFT 10 +#define HD64465_IOMAP_HI_MASK ((1<<HD64465_IOMAP_HI_SHIFT)-1) +#define HD64465_IOMAP_HI_NMAP (HD64465_IOMAP_HI_THRESH>>HD64465_IOMAP_HI_SHIFT) +static unsigned long hd64465_iomap_hi[HD64465_IOMAP_HI_NMAP]; +static unsigned char hd64465_iomap_hi_shift[HD64465_IOMAP_HI_NMAP]; + +#ifndef MAX +#define MAX(a,b) ((a)>(b)?(a):(b)) +#endif + +#define PORT2ADDR(x) (sh_mv.mv_isa_port2addr(x)) + +void hd64465_port_map(unsigned short baseport, unsigned int nports, + unsigned long addr, unsigned char shift) +{ + unsigned int port, endport = baseport + nports; + + DPRINTK("hd64465_port_map(base=0x%04hx, n=0x%04hx, addr=0x%08lx,endport=0x%04x)\n", + baseport, nports, addr,endport); + + for (port = baseport ; + port < endport && port < HD64465_IOMAP_LO_THRESH ; + port += (1<<HD64465_IOMAP_LO_SHIFT)) { + DPRINTK(" maplo[0x%x] = 0x%08lx\n", port, addr); + hd64465_iomap_lo[port>>HD64465_IOMAP_LO_SHIFT] = addr; + hd64465_iomap_lo_shift[port>>HD64465_IOMAP_LO_SHIFT] = shift; + addr += (1<<(HD64465_IOMAP_LO_SHIFT)); + } + + for (port = MAX(baseport, HD64465_IOMAP_LO_THRESH) ; + port < endport && port < HD64465_IOMAP_HI_THRESH ; + port += (1<<HD64465_IOMAP_HI_SHIFT)) { + DPRINTK(" maphi[0x%x] = 0x%08lx\n", port, addr); + hd64465_iomap_hi[port>>HD64465_IOMAP_HI_SHIFT] = addr; + hd64465_iomap_hi_shift[port>>HD64465_IOMAP_HI_SHIFT] = shift; + addr += (1<<(HD64465_IOMAP_HI_SHIFT)); + } +} +EXPORT_SYMBOL(hd64465_port_map); + +void hd64465_port_unmap(unsigned short baseport, unsigned int nports) +{ + unsigned int port, endport = baseport + nports; + + DPRINTK("hd64465_port_unmap(base=0x%04hx, n=0x%04hx)\n", + baseport, nports); + + for (port = baseport ; + port < endport && port < HD64465_IOMAP_LO_THRESH ; + port += (1<<HD64465_IOMAP_LO_SHIFT)) { + hd64465_iomap_lo[port>>HD64465_IOMAP_LO_SHIFT] = 0; + } + + for (port = MAX(baseport, HD64465_IOMAP_LO_THRESH) ; + port < endport && port < HD64465_IOMAP_HI_THRESH ; + port += (1<<HD64465_IOMAP_HI_SHIFT)) { + hd64465_iomap_hi[port>>HD64465_IOMAP_HI_SHIFT] = 0; + } +} +EXPORT_SYMBOL(hd64465_port_unmap); + +unsigned long hd64465_isa_port2addr(unsigned long port) +{ + unsigned long addr = 0; + unsigned char shift; + + /* handle remapping of low IO ports */ + if (port < HD64465_IOMAP_LO_THRESH) { + addr = hd64465_iomap_lo[port >> HD64465_IOMAP_LO_SHIFT]; + shift = hd64465_iomap_lo_shift[port >> HD64465_IOMAP_LO_SHIFT]; + if (addr != 0) + addr += (port & HD64465_IOMAP_LO_MASK) << shift; + else + printk(KERN_NOTICE "io_hd64465: access to un-mapped port %lx\n", port); + } else if (port < HD64465_IOMAP_HI_THRESH) { + addr = hd64465_iomap_hi[port >> HD64465_IOMAP_HI_SHIFT]; + shift = hd64465_iomap_hi_shift[port >> HD64465_IOMAP_HI_SHIFT]; + if (addr != 0) + addr += (port & HD64465_IOMAP_HI_MASK) << shift; + else + printk(KERN_NOTICE "io_hd64465: access to un-mapped port %lx\n", port); + } + + /* HD64465 internal devices (0xb0000000) */ + else if (port < 0x20000) + addr = CONFIG_HD64465_IOBASE + port - 0x10000; + + /* Whole physical address space (0xa0000000) */ + else + addr = P2SEGADDR(port); + + DIPRINTK(2, "PORT2ADDR(0x%08lx) = 0x%08lx\n", port, addr); + + return addr; +} + +static inline void delay(void) +{ + ctrl_inw(0xa0000000); +} + +unsigned char hd64465_inb(unsigned long port) +{ + unsigned long addr = PORT2ADDR(port); + unsigned long b = (addr == 0 ? 0 : *(volatile unsigned char*)addr); + + DIPRINTK(0, "inb(%08lx) = %02x\n", addr, (unsigned)b); + return b; +} + +unsigned char hd64465_inb_p(unsigned long port) +{ + unsigned long v; + unsigned long addr = PORT2ADDR(port); + + v = (addr == 0 ? 0 : *(volatile unsigned char*)addr); + delay(); + DIPRINTK(0, "inb_p(%08lx) = %02x\n", addr, (unsigned)v); + return v; +} + +unsigned short hd64465_inw(unsigned long port) +{ + unsigned long addr = PORT2ADDR(port); + unsigned long b = (addr == 0 ? 0 : *(volatile unsigned short*)addr); + DIPRINTK(0, "inw(%08lx) = %04lx\n", addr, b); + return b; +} + +unsigned int hd64465_inl(unsigned long port) +{ + unsigned long addr = PORT2ADDR(port); + unsigned int b = (addr == 0 ? 0 : *(volatile unsigned long*)addr); + DIPRINTK(0, "inl(%08lx) = %08x\n", addr, b); + return b; +} + +void hd64465_outb(unsigned char b, unsigned long port) +{ + unsigned long addr = PORT2ADDR(port); + + DIPRINTK(0, "outb(%02x, %08lx)\n", (unsigned)b, addr); + if (addr != 0) + *(volatile unsigned char*)addr = b; +} + +void hd64465_outb_p(unsigned char b, unsigned long port) +{ + unsigned long addr = PORT2ADDR(port); + + DIPRINTK(0, "outb_p(%02x, %08lx)\n", (unsigned)b, addr); + if (addr != 0) + *(volatile unsigned char*)addr = b; + delay(); +} + +void hd64465_outw(unsigned short b, unsigned long port) +{ + unsigned long addr = PORT2ADDR(port); + DIPRINTK(0, "outw(%04x, %08lx)\n", (unsigned)b, addr); + if (addr != 0) + *(volatile unsigned short*)addr = b; +} + +void hd64465_outl(unsigned int b, unsigned long port) +{ + unsigned long addr = PORT2ADDR(port); + DIPRINTK(0, "outl(%08x, %08lx)\n", b, addr); + if (addr != 0) + *(volatile unsigned long*)addr = b; +} + diff --git a/arch/sh/cchips/hd6446x/hd64465/setup.c b/arch/sh/cchips/hd6446x/hd64465/setup.c new file mode 100644 index 00000000000..68e4c4e4283 --- /dev/null +++ b/arch/sh/cchips/hd6446x/hd64465/setup.c @@ -0,0 +1,202 @@ +/* + * $Id: setup.c,v 1.4 2003/08/03 03:05:10 lethal Exp $ + * + * Setup and IRQ handling code for the HD64465 companion chip. + * by Greg Banks <gbanks@pocketpenguins.com> + * Copyright (c) 2000 PocketPenguins Inc + * + * Derived from setup_hd64461.c which bore the message: + * Copyright (C) 2000 YAEGASHI Takeshi + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/io.h> +#include <asm/irq.h> + +#include <asm/hd64465/hd64465.h> + +static void disable_hd64465_irq(unsigned int irq) +{ + unsigned long flags; + unsigned short nimr; + unsigned short mask = 1 << (irq - HD64465_IRQ_BASE); + + pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask); + local_irq_save(flags); + nimr = inw(HD64465_REG_NIMR); + nimr |= mask; + outw(nimr, HD64465_REG_NIMR); + local_irq_restore(flags); +} + + +static void enable_hd64465_irq(unsigned int irq) +{ + unsigned long flags; + unsigned short nimr; + unsigned short mask = 1 << (irq - HD64465_IRQ_BASE); + + pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask); + local_irq_save(flags); + nimr = inw(HD64465_REG_NIMR); + nimr &= ~mask; + outw(nimr, HD64465_REG_NIMR); + local_irq_restore(flags); +} + + +static void mask_and_ack_hd64465(unsigned int irq) +{ + disable_hd64465_irq(irq); +} + + +static void end_hd64465_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_hd64465_irq(irq); +} + + +static unsigned int startup_hd64465_irq(unsigned int irq) +{ + enable_hd64465_irq(irq); + return 0; +} + + +static void shutdown_hd64465_irq(unsigned int irq) +{ + disable_hd64465_irq(irq); +} + + +static struct hw_interrupt_type hd64465_irq_type = { + .typename = "HD64465-IRQ", + .startup = startup_hd64465_irq, + .shutdown = shutdown_hd64465_irq, + .enable = enable_hd64465_irq, + .disable = disable_hd64465_irq, + .ack = mask_and_ack_hd64465, + .end = end_hd64465_irq, +}; + + +static irqreturn_t hd64465_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + printk(KERN_INFO + "HD64465: spurious interrupt, nirr: 0x%x nimr: 0x%x\n", + inw(HD64465_REG_NIRR), inw(HD64465_REG_NIMR)); + + return IRQ_NONE; +} + + +/*====================================================*/ + +/* + * Support for a secondary IRQ demux step. This is necessary + * because the HD64465 presents a very thin interface to the + * PCMCIA bus; a lot of features (such as remapping interrupts) + * normally done in hardware by other PCMCIA host bridges is + * instead done in software. + */ +static struct +{ + int (*func)(int, void *); + void *dev; +} hd64465_demux[HD64465_IRQ_NUM]; + +void hd64465_register_irq_demux(int irq, + int (*demux)(int irq, void *dev), void *dev) +{ + hd64465_demux[irq - HD64465_IRQ_BASE].func = demux; + hd64465_demux[irq - HD64465_IRQ_BASE].dev = dev; +} +EXPORT_SYMBOL(hd64465_register_irq_demux); + +void hd64465_unregister_irq_demux(int irq) +{ + hd64465_demux[irq - HD64465_IRQ_BASE].func = 0; +} +EXPORT_SYMBOL(hd64465_unregister_irq_demux); + + + +int hd64465_irq_demux(int irq) +{ + if (irq == CONFIG_HD64465_IRQ) { + unsigned short i, bit; + unsigned short nirr = inw(HD64465_REG_NIRR); + unsigned short nimr = inw(HD64465_REG_NIMR); + + pr_debug("hd64465_irq_demux, nirr=%04x, nimr=%04x\n", nirr, nimr); + nirr &= ~nimr; + for (bit = 1, i = 0 ; i < HD64465_IRQ_NUM ; bit <<= 1, i++) + if (nirr & bit) + break; + + if (i < HD64465_IRQ_NUM) { + irq = HD64465_IRQ_BASE + i; + if (hd64465_demux[i].func != 0) + irq = hd64465_demux[i].func(irq, hd64465_demux[i].dev); + } + } + return irq; +} + +static struct irqaction irq0 = { hd64465_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "HD64465", NULL, NULL}; + + +static int __init setup_hd64465(void) +{ + int i; + unsigned short rev; + unsigned short smscr; + + if (!MACH_HD64465) + return 0; + + printk(KERN_INFO "HD64465 configured at 0x%x on irq %d(mapped into %d to %d)\n", + CONFIG_HD64465_IOBASE, + CONFIG_HD64465_IRQ, + HD64465_IRQ_BASE, + HD64465_IRQ_BASE+HD64465_IRQ_NUM-1); + + if (inw(HD64465_REG_SDID) != HD64465_SDID) { + printk(KERN_ERR "HD64465 device ID not found, check base address\n"); + } + + rev = inw(HD64465_REG_SRR); + printk(KERN_INFO "HD64465 hardware revision %d.%d\n", (rev >> 8) & 0xff, rev & 0xff); + + outw(0xffff, HD64465_REG_NIMR); /* mask all interrupts */ + + for (i = 0; i < HD64465_IRQ_NUM ; i++) { + irq_desc[HD64465_IRQ_BASE + i].handler = &hd64465_irq_type; + } + + setup_irq(CONFIG_HD64465_IRQ, &irq0); + +#ifdef CONFIG_SERIAL + /* wake up the UART from STANDBY at this point */ + smscr = inw(HD64465_REG_SMSCR); + outw(smscr & (~HD64465_SMSCR_UARTST), HD64465_REG_SMSCR); + + /* remap IO ports for first ISA serial port to HD64465 UART */ + hd64465_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1); +#endif + + return 0; +} + +module_init(setup_hd64465); diff --git a/arch/sh/cchips/voyagergx/Makefile b/arch/sh/cchips/voyagergx/Makefile new file mode 100644 index 00000000000..085de72fd32 --- /dev/null +++ b/arch/sh/cchips/voyagergx/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for VoyagerGX +# + +obj-y := irq.o setup.o + +obj-$(CONFIG_USB_OHCI_HCD) += consistent.o + diff --git a/arch/sh/cchips/voyagergx/consistent.c b/arch/sh/cchips/voyagergx/consistent.c new file mode 100644 index 00000000000..5b92585a38d --- /dev/null +++ b/arch/sh/cchips/voyagergx/consistent.c @@ -0,0 +1,126 @@ +/* + * arch/sh/cchips/voyagergx/consistent.c + * + * Copyright (C) 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/mm.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/device.h> +#include <asm/io.h> +#include <asm/bus-sh.h> + +struct voya_alloc_entry { + struct list_head list; + unsigned long ofs; + unsigned long len; +}; + +static DEFINE_SPINLOCK(voya_list_lock); +static LIST_HEAD(voya_alloc_list); + +#define OHCI_SRAM_START 0xb0000000 +#define OHCI_HCCA_SIZE 0x100 +#define OHCI_SRAM_SIZE 0x10000 + +void *voyagergx_consistent_alloc(struct device *dev, size_t size, + dma_addr_t *handle, int flag) +{ + struct list_head *list = &voya_alloc_list; + struct voya_alloc_entry *entry; + struct sh_dev *shdev = to_sh_dev(dev); + unsigned long start, end; + unsigned long flags; + + /* + * The SM501 contains an integrated 8051 with its own SRAM. + * Devices within the cchip can all hook into the 8051 SRAM. + * We presently use this for the OHCI. + * + * Everything else goes through consistent_alloc(). + */ + if (!dev || dev->bus != &sh_bus_types[SH_BUS_VIRT] || + (dev->bus == &sh_bus_types[SH_BUS_VIRT] && + shdev->dev_id != SH_DEV_ID_USB_OHCI)) + return NULL; + + start = OHCI_SRAM_START + OHCI_HCCA_SIZE; + + entry = kmalloc(sizeof(struct voya_alloc_entry), GFP_ATOMIC); + if (!entry) + return ERR_PTR(-ENOMEM); + + entry->len = (size + 15) & ~15; + + /* + * The basis for this allocator is dwmw2's malloc.. the + * Matrox allocator :-) + */ + spin_lock_irqsave(&voya_list_lock, flags); + list_for_each(list, &voya_alloc_list) { + struct voya_alloc_entry *p; + + p = list_entry(list, struct voya_alloc_entry, list); + + if (p->ofs - start >= size) + goto out; + + start = p->ofs + p->len; + } + + end = start + (OHCI_SRAM_SIZE - OHCI_HCCA_SIZE); + list = &voya_alloc_list; + + if (end - start >= size) { +out: + entry->ofs = start; + list_add_tail(&entry->list, list); + spin_unlock_irqrestore(&voya_list_lock, flags); + + *handle = start; + return (void *)start; + } + + kfree(entry); + spin_unlock_irqrestore(&voya_list_lock, flags); + + return ERR_PTR(-EINVAL); +} + +int voyagergx_consistent_free(struct device *dev, size_t size, + void *vaddr, dma_addr_t handle) +{ + struct voya_alloc_entry *entry; + struct sh_dev *shdev = to_sh_dev(dev); + unsigned long flags; + + if (!dev || dev->bus != &sh_bus_types[SH_BUS_VIRT] || + (dev->bus == &sh_bus_types[SH_BUS_VIRT] && + shdev->dev_id != SH_DEV_ID_USB_OHCI)) + return -EINVAL; + + spin_lock_irqsave(&voya_list_lock, flags); + list_for_each_entry(entry, &voya_alloc_list, list) { + if (entry->ofs != handle) + continue; + + list_del(&entry->list); + kfree(entry); + + break; + } + spin_unlock_irqrestore(&voya_list_lock, flags); + + return 0; +} + +EXPORT_SYMBOL(voyagergx_consistent_alloc); +EXPORT_SYMBOL(voyagergx_consistent_free); + diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c new file mode 100644 index 00000000000..3079234cb65 --- /dev/null +++ b/arch/sh/cchips/voyagergx/irq.c @@ -0,0 +1,194 @@ +/* -------------------------------------------------------------------- */ +/* setup_voyagergx.c: */ +/* -------------------------------------------------------------------- */ +/* This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Copyright 2003 (c) Lineo uSolutions,Inc. +*/ +/* -------------------------------------------------------------------- */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/rts7751r2d/rts7751r2d.h> +#include <asm/rts7751r2d/voyagergx_reg.h> + +static void disable_voyagergx_irq(unsigned int irq) +{ + unsigned long flags, val; + unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); + + pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask); + local_irq_save(flags); + val = inl(VOYAGER_INT_MASK); + val &= ~mask; + outl(val, VOYAGER_INT_MASK); + local_irq_restore(flags); +} + + +static void enable_voyagergx_irq(unsigned int irq) +{ + unsigned long flags, val; + unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); + + pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask); + local_irq_save(flags); + val = inl(VOYAGER_INT_MASK); + val |= mask; + outl(val, VOYAGER_INT_MASK); + local_irq_restore(flags); +} + + +static void mask_and_ack_voyagergx(unsigned int irq) +{ + disable_voyagergx_irq(irq); +} + +static void end_voyagergx_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_voyagergx_irq(irq); +} + +static unsigned int startup_voyagergx_irq(unsigned int irq) +{ + enable_voyagergx_irq(irq); + return 0; +} + +static void shutdown_voyagergx_irq(unsigned int irq) +{ + disable_voyagergx_irq(irq); +} + +static struct hw_interrupt_type voyagergx_irq_type = { + "VOYAGERGX-IRQ", + startup_voyagergx_irq, + shutdown_voyagergx_irq, + enable_voyagergx_irq, + disable_voyagergx_irq, + mask_and_ack_voyagergx, + end_voyagergx_irq, +}; + +static irqreturn_t voyagergx_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + printk(KERN_INFO + "VoyagerGX: spurious interrupt, status: 0x%x\n", + inl(INT_STATUS)); + return IRQ_HANDLED; +} + + +/*====================================================*/ + +static struct { + int (*func)(int, void *); + void *dev; +} voyagergx_demux[VOYAGER_IRQ_NUM]; + +void voyagergx_register_irq_demux(int irq, + int (*demux)(int irq, void *dev), void *dev) +{ + voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = demux; + voyagergx_demux[irq - VOYAGER_IRQ_BASE].dev = dev; +} + +void voyagergx_unregister_irq_demux(int irq) +{ + voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = 0; +} + +int voyagergx_irq_demux(int irq) +{ + + if (irq == IRQ_VOYAGER ) { + unsigned long i = 0, bit __attribute__ ((unused)); + unsigned long val = inl(INT_STATUS); +#if 1 + if ( val & ( 1 << 1 )){ + i = 1; + } else if ( val & ( 1 << 2 )){ + i = 2; + } else if ( val & ( 1 << 6 )){ + i = 6; + } else if( val & ( 1 << 10 )){ + i = 10; + } else if( val & ( 1 << 11 )){ + i = 11; + } else if( val & ( 1 << 12 )){ + i = 12; + } else if( val & ( 1 << 17 )){ + i = 17; + } else { + printk("Unexpected IRQ irq = %d status = 0x%08lx\n", irq, val); + } + pr_debug("voyagergx_irq_demux %d \n", i); +#else + for (bit = 1, i = 0 ; i < VOYAGER_IRQ_NUM ; bit <<= 1, i++) + if (val & bit) + break; +#endif + if (i < VOYAGER_IRQ_NUM) { + irq = VOYAGER_IRQ_BASE + i; + if (voyagergx_demux[i].func != 0) + irq = voyagergx_demux[i].func(irq, voyagergx_demux[i].dev); + } + } + return irq; +} + +static struct irqaction irq0 = { voyagergx_interrupt, SA_INTERRUPT, 0, "VOYAGERGX", NULL, NULL}; + +void __init setup_voyagergx_irq(void) +{ + int i, flag; + + printk(KERN_INFO "VoyagerGX configured at 0x%x on irq %d(mapped into %d to %d)\n", + VOYAGER_BASE, + IRQ_VOYAGER, + VOYAGER_IRQ_BASE, + VOYAGER_IRQ_BASE + VOYAGER_IRQ_NUM - 1); + + for (i=0; i<VOYAGER_IRQ_NUM; i++) { + flag = 0; + switch (VOYAGER_IRQ_BASE + i) { + case VOYAGER_USBH_IRQ: + case VOYAGER_8051_IRQ: + case VOYAGER_UART0_IRQ: + case VOYAGER_UART1_IRQ: + case VOYAGER_AC97_IRQ: + flag = 1; + } + if (flag == 1) + irq_desc[VOYAGER_IRQ_BASE + i].handler = &voyagergx_irq_type; + } + + setup_irq(IRQ_VOYAGER, &irq0); +} + diff --git a/arch/sh/cchips/voyagergx/setup.c b/arch/sh/cchips/voyagergx/setup.c new file mode 100644 index 00000000000..139ca88ac9e --- /dev/null +++ b/arch/sh/cchips/voyagergx/setup.c @@ -0,0 +1,37 @@ +/* + * arch/sh/cchips/voyagergx/setup.c + * + * Setup routines for VoyagerGX cchip. + * + * Copyright (C) 2003 Lineo uSolutions, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <linux/module.h> +#include <asm/io.h> +#include <asm/rts7751r2d/voyagergx_reg.h> + +static int __init setup_voyagergx(void) +{ + unsigned long val; + + val = inl(DRAM_CTRL); + val |= (DRAM_CTRL_CPU_COLUMN_SIZE_256 | + DRAM_CTRL_CPU_ACTIVE_PRECHARGE | + DRAM_CTRL_CPU_RESET | + DRAM_CTRL_REFRESH_COMMAND | + DRAM_CTRL_BLOCK_WRITE_TIME | + DRAM_CTRL_BLOCK_WRITE_PRECHARGE | + DRAM_CTRL_ACTIVE_PRECHARGE | + DRAM_CTRL_RESET | + DRAM_CTRL_REMAIN_ACTIVE); + outl(val, DRAM_CTRL); + + return 0; +} + +module_init(setup_voyagergx); diff --git a/arch/sh/configs/adx_defconfig b/arch/sh/configs/adx_defconfig new file mode 100644 index 00000000000..353bfdc457d --- /dev/null +++ b/arch/sh/configs/adx_defconfig @@ -0,0 +1,539 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-sh +# Wed Mar 2 15:09:26 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_SYSCTL is not set +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +# CONFIG_IKCONFIG is not set +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP620 is not set +# CONFIG_SH_HP680 is not set +# CONFIG_SH_HP690 is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +CONFIG_SH_ADX=y +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_UNKNOWN is not set +# CONFIG_CPU_SH2 is not set +# CONFIG_CPU_SH3 is not set +CONFIG_CPU_SH4=y +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +CONFIG_CPU_SUBTYPE_SH7750=y +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_MMU=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x00400000 +CONFIG_MEMORY_SET=y +# CONFIG_MEMORY_OVERRIDE is not set +CONFIG_CF_ENABLER=y +# CONFIG_CF_AREA5 is not set +CONFIG_CF_AREA6=y +CONFIG_CF_BASE_ADDR=0xb8000000 +CONFIG_SH_RTC=y +CONFIG_SH_FPU=y +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_PREEMPT is not set +# CONFIG_UBC_WAKEUP is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +# CONFIG_SH_STORE_QUEUES is not set +# CONFIG_SMP is not set +CONFIG_SH_PCLK_CALC=y +CONFIG_SH_PCLK_FREQ=50000000 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# SH initrd options +# +# CONFIG_EMBEDDED_RAMDISK is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_IDE_SH=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Networking support +# +# CONFIG_NET is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_CT82C710 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_SH_SCI is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_FRAME_POINTER is not set +CONFIG_SH_STANDARD_BIOS=y +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_EARLY_PRINTK is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set diff --git a/arch/sh/configs/cqreek_defconfig b/arch/sh/configs/cqreek_defconfig new file mode 100644 index 00000000000..614662ae578 --- /dev/null +++ b/arch/sh/configs/cqreek_defconfig @@ -0,0 +1,533 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-sh +# Wed Mar 2 15:09:38 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_SYSCTL is not set +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +# CONFIG_IKCONFIG is not set +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP620 is not set +# CONFIG_SH_HP680 is not set +# CONFIG_SH_HP690 is not set +CONFIG_SH_CQREEK=y +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_UNKNOWN is not set +# CONFIG_CPU_SH2 is not set +CONFIG_CPU_SH3=y +# CONFIG_CPU_SH4 is not set +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +CONFIG_CPU_SUBTYPE_SH7708=y +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_MMU=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x00400000 +# CONFIG_MEMORY_OVERRIDE is not set +CONFIG_SH_RTC=y +CONFIG_SH_DSP=y +CONFIG_SH_ADC=y +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_PREEMPT is not set +# CONFIG_UBC_WAKEUP is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +# CONFIG_SMP is not set +CONFIG_SH_PCLK_CALC=y +CONFIG_SH_PCLK_FREQ=1193182 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# SH initrd options +# +# CONFIG_EMBEDDED_RAMDISK is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_IDE_SH=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Networking support +# +# CONFIG_NET is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_CT82C710 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_SH_SCI is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_FRAME_POINTER is not set +CONFIG_SH_STANDARD_BIOS=y +# CONFIG_EARLY_PRINTK is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig new file mode 100644 index 00000000000..776c1909bee --- /dev/null +++ b/arch/sh/configs/dreamcast_defconfig @@ -0,0 +1,794 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-sh +# Wed Mar 2 15:09:40 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP620 is not set +# CONFIG_SH_HP680 is not set +# CONFIG_SH_HP690 is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +CONFIG_SH_DREAMCAST=y +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_UNKNOWN is not set +# CONFIG_CPU_SH2 is not set +# CONFIG_CPU_SH3 is not set +CONFIG_CPU_SH4=y +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +CONFIG_CPU_SUBTYPE_SH7750=y +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_MMU=y +CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_CMDLINE_BOOL is not set +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x01000000 +CONFIG_MEMORY_SET=y +# CONFIG_MEMORY_OVERRIDE is not set +CONFIG_SH_FPU=y +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_PREEMPT=y +# CONFIG_UBC_WAKEUP is not set +# CONFIG_SH_WRITETHROUGH is not set +CONFIG_SH_OCRAM=y +CONFIG_SH_STORE_QUEUES=y +# CONFIG_SMP is not set +CONFIG_SH_PCLK_CALC=y +CONFIG_SH_PCLK_FREQ=49876504 + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_TABLE=y +CONFIG_SH_CPU_FREQ=y + +# +# DMA support +# +CONFIG_SH_DMA=y +CONFIG_NR_ONCHIP_DMA_CHANNELS=4 +CONFIG_NR_DMA_CHANNELS_BOOL=y +CONFIG_NR_DMA_CHANNELS=9 + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +CONFIG_MAPLE=y +CONFIG_PCI=y +# CONFIG_SH_PCIDMA_NONCOHERENT is not set +CONFIG_PCI_AUTO=y +CONFIG_PCI_LEGACY_PROC=y +CONFIG_PCI_NAMES=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# SH initrd options +# +# CONFIG_EMBEDDED_RAMDISK is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=1024 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_MAPLE is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_MAPLE is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_SH_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +CONFIG_FB_PVR2=y +# CONFIG_FB_EPSON1355 is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON_OLD is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set + +# +# Logo configuration +# +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_SUPERH_MONO is not set +# CONFIG_LOGO_SUPERH_VGA16 is not set +CONFIG_LOGO_SUPERH_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +# CONFIG_DEVFS_DEBUG is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_FRAME_POINTER is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/sh/configs/hp680_defconfig b/arch/sh/configs/hp680_defconfig new file mode 100644 index 00000000000..c85d3655b53 --- /dev/null +++ b/arch/sh/configs/hp680_defconfig @@ -0,0 +1,554 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-sh +# Wed Mar 2 15:09:41 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_SYSCTL is not set +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +# CONFIG_IKCONFIG is not set +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP620 is not set +CONFIG_SH_HP680=y +# CONFIG_SH_HP690 is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_UNKNOWN is not set +# CONFIG_CPU_SH2 is not set +CONFIG_CPU_SH3=y +# CONFIG_CPU_SH4 is not set +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +CONFIG_CPU_SUBTYPE_SH7709=y +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_MMU=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x00400000 +CONFIG_MEMORY_SET=y +# CONFIG_MEMORY_OVERRIDE is not set +CONFIG_SH_RTC=y +# CONFIG_SH_DSP is not set +CONFIG_SH_ADC=y +CONFIG_SH_HP600=y +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_PREEMPT is not set +# CONFIG_UBC_WAKEUP is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +# CONFIG_SMP is not set +CONFIG_SH_PCLK_CALC=y +CONFIG_SH_PCLK_FREQ=1193182 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +CONFIG_HD6446X_SERIES=y +CONFIG_HD64461=y +# CONFIG_HD64465 is not set +CONFIG_HD64461_IRQ=36 +# CONFIG_HD64461_ENABLER is not set + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# SH initrd options +# +# CONFIG_EMBEDDED_RAMDISK is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_IDE_SH=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Networking support +# +# CONFIG_NET is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_RAW is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_SH_SCI is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# + +# +# Graphics support +# +CONFIG_FB=y +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_EPSON1355 is not set +CONFIG_FB_HIT=y +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +CONFIG_FONT_PEARL_8x8=y +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +# CONFIG_DEVFS_DEBUG is not set +# CONFIG_DEVPTS_FS_XATTR is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig new file mode 100644 index 00000000000..a3bd280b53d --- /dev/null +++ b/arch/sh/configs/microdev_defconfig @@ -0,0 +1,734 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-sh +# Wed Mar 2 15:09:41 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP620 is not set +# CONFIG_SH_HP680 is not set +# CONFIG_SH_HP690 is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +CONFIG_SH_SH4202_MICRODEV=y +# CONFIG_SH_UNKNOWN is not set +# CONFIG_CPU_SH2 is not set +# CONFIG_CPU_SH3 is not set +CONFIG_CPU_SH4=y +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +CONFIG_CPU_SUBTYPE_SH4_202=y +CONFIG_MMU=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,115200" +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_MEMORY_SET=y +# CONFIG_MEMORY_OVERRIDE is not set +CONFIG_SH_RTC=y +CONFIG_SH_FPU=y +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_PREEMPT=y +# CONFIG_UBC_WAKEUP is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +# CONFIG_SH_STORE_QUEUES is not set +# CONFIG_SMP is not set +CONFIG_SH_PCLK_CALC=y +CONFIG_SH_PCLK_FREQ=65986048 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +CONFIG_SH_DMA=y +CONFIG_NR_ONCHIP_DMA_CHANNELS=4 +# CONFIG_NR_DMA_CHANNELS_BOOL is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set +CONFIG_HEARTBEAT=y + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +CONFIG_ISA=y +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# +CONFIG_PCMCIA_PROBE=y + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# SH initrd options +# +# CONFIG_EMBEDDED_RAMDISK is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_XD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=1 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_IDE_SH=y +# CONFIG_IDE_ARM is not set +# CONFIG_IDE_CHIPSETS is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_NETLINK_DEV is not set +# CONFIG_UNIX is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set +CONFIG_SMC91X=y +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +# CONFIG_NET_PCI is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Userland interfaces +# + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +# CONFIG_SERIO is not set +# CONFIG_SERIO_I8042 is not set + +# +# Input Device Drivers +# + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +# CONFIG_DEVFS_DEBUG is not set +CONFIG_DEVPTS_FS_XATTR=y +# CONFIG_DEVPTS_FS_SECURITY is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_FRAME_POINTER is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/sh/configs/rts7751r2d_defconfig b/arch/sh/configs/rts7751r2d_defconfig new file mode 100644 index 00000000000..e43cf57326b --- /dev/null +++ b/arch/sh/configs/rts7751r2d_defconfig @@ -0,0 +1,847 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-sh +# Wed Mar 2 15:09:42 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP620 is not set +# CONFIG_SH_HP680 is not set +# CONFIG_SH_HP690 is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +CONFIG_SH_RTS7751R2D=y +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_UNKNOWN is not set +# CONFIG_CPU_SH2 is not set +# CONFIG_CPU_SH3 is not set +CONFIG_CPU_SH4=y +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +CONFIG_CPU_SUBTYPE_SH7751=y +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_MMU=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="mem=64M console=ttySC0,115200 root=/dev/hda1" +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_MEMORY_SET=y +# CONFIG_MEMORY_OVERRIDE is not set +CONFIG_SH_RTC=y +CONFIG_SH_FPU=y +CONFIG_ZERO_PAGE_OFFSET=0x00010000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_PREEMPT is not set +# CONFIG_UBC_WAKEUP is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +# CONFIG_SH_STORE_QUEUES is not set +# CONFIG_SMP is not set +CONFIG_RTS7751R2D_REV11=y +CONFIG_SH_PCLK_CALC=y +CONFIG_SH_PCLK_FREQ=60000000 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +CONFIG_SH_DMA=y +CONFIG_NR_ONCHIP_DMA_CHANNELS=8 +# CONFIG_NR_DMA_CHANNELS_BOOL is not set + +# +# Companion Chips +# +CONFIG_VOYAGERGX=y +# CONFIG_HD6446X_SERIES is not set +CONFIG_HEARTBEAT=y +CONFIG_RTC_9701JE=y + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCI_LEGACY_PROC is not set +CONFIG_PCI_NAMES=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_IDEPCI is not set +CONFIG_IDE_SH=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_HERMES=m +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_PCI_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Userland interfaces +# + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +# CONFIG_SERIO is not set +# CONFIG_SERIO_I8042 is not set + +# +# Input Device Drivers +# + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_SH_SCI is not set +# CONFIG_UNIX98_PTYS is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_TRIDENT is not set +CONFIG_SND_YMFPCI=m +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=m +# CONFIG_SOUND_BT878 is not set +CONFIG_SOUND_CMPCI=m +# CONFIG_SOUND_EMU10K1 is not set +# CONFIG_SOUND_FUSION is not set +# CONFIG_SOUND_CS4281 is not set +# CONFIG_SOUND_ES1370 is not set +# CONFIG_SOUND_ES1371 is not set +# CONFIG_SOUND_ESSSOLO1 is not set +# CONFIG_SOUND_MAESTRO is not set +# CONFIG_SOUND_MAESTRO3 is not set +# CONFIG_SOUND_ICH is not set +# CONFIG_SOUND_SONICVIBES is not set +# CONFIG_SOUND_TRIDENT is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +# CONFIG_SOUND_VIA82CXXX is not set +# CONFIG_SOUND_OSS is not set +# CONFIG_SOUND_ALI5455 is not set +# CONFIG_SOUND_FORTE is not set +# CONFIG_SOUND_RME96XX is not set +# CONFIG_SOUND_AD1980 is not set +CONFIG_SOUND_VOYAGERGX=m + +# +# USB support +# +# CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/sh/configs/se7300_defconfig b/arch/sh/configs/se7300_defconfig new file mode 100644 index 00000000000..4b71cd692fa --- /dev/null +++ b/arch/sh/configs/se7300_defconfig @@ -0,0 +1,531 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-sh +# Wed Mar 2 15:09:43 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +CONFIG_SH_7300_SOLUTION_ENGINE=y +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP620 is not set +# CONFIG_SH_HP680 is not set +# CONFIG_SH_HP690 is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_UNKNOWN is not set +# CONFIG_CPU_SH2 is not set +CONFIG_CPU_SH3=y +# CONFIG_CPU_SH4 is not set +# CONFIG_CPU_SUBTYPE_SH7604 is not set +CONFIG_CPU_SUBTYPE_SH7300=y +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_MMU=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,38400 root=/dev/ram0" +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 +# CONFIG_MEMORY_OVERRIDE is not set +CONFIG_SH_DSP=y +# CONFIG_SH_ADC is not set +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00210000 +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_PREEMPT is not set +# CONFIG_UBC_WAKEUP is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +# CONFIG_SMP is not set +# CONFIG_SH_PCLK_CALC is not set +CONFIG_SH_PCLK_FREQ=33333333 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set +CONFIG_HEARTBEAT=y + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# SH initrd options +# +CONFIG_EMBEDDED_RAMDISK=y +CONFIG_EMBEDDED_RAMDISK_IMAGE="ramdisk.gz" + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Networking support +# +# CONFIG_NET is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +CONFIG_IPMI_HANDLER=y +# CONFIG_IPMI_PANIC_EVENT is not set +CONFIG_IPMI_DEVICE_INTERFACE=y +# CONFIG_IPMI_SI is not set +CONFIG_IPMI_WATCHDOG=y +# CONFIG_IPMI_POWEROFF is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=y +# CONFIG_SH_WDT is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +# CONFIG_DEVFS_DEBUG is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_FRAME_POINTER is not set +CONFIG_SH_STANDARD_BIOS=y +CONFIG_EARLY_PRINTK=y +CONFIG_KGDB=y + +# +# KGDB configuration options +# +# CONFIG_MORE_COMPILE_OPTIONS is not set +# CONFIG_KGDB_NMI is not set +# CONFIG_KGDB_THREAD is not set +# CONFIG_SH_KGDB_CONSOLE is not set +# CONFIG_KGDB_SYSRQ is not set +# CONFIG_KGDB_KERNEL_ASSERTS is not set + +# +# Serial port setup +# +CONFIG_KGDB_DEFPORT=1 +CONFIG_KGDB_DEFBAUD=115200 +CONFIG_KGDB_DEFPARITY_N=y +# CONFIG_KGDB_DEFPARITY_E is not set +# CONFIG_KGDB_DEFPARITY_O is not set +CONFIG_KGDB_DEFBITS_8=y +# CONFIG_KGDB_DEFBITS_7 is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/sh/configs/se73180_defconfig b/arch/sh/configs/se73180_defconfig new file mode 100644 index 00000000000..d217e44c89a --- /dev/null +++ b/arch/sh/configs/se73180_defconfig @@ -0,0 +1,496 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-sh +# Wed Mar 2 15:09:44 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_SYSCTL is not set +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +CONFIG_SH_73180_SOLUTION_ENGINE=y +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP620 is not set +# CONFIG_SH_HP680 is not set +# CONFIG_SH_HP690 is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_UNKNOWN is not set +# CONFIG_CPU_SH2 is not set +# CONFIG_CPU_SH3 is not set +CONFIG_CPU_SH4=y +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +CONFIG_CPU_SUBTYPE_SH73180=y +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_MMU=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,38400 root=/dev/ram" +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x02000000 +# CONFIG_MEMORY_OVERRIDE is not set +# CONFIG_SH_FPU is not set +CONFIG_ZERO_PAGE_OFFSET=0x00010000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_PREEMPT is not set +# CONFIG_UBC_WAKEUP is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +# CONFIG_SH_STORE_QUEUES is not set +# CONFIG_SMP is not set +# CONFIG_SH_PCLK_CALC is not set +CONFIG_SH_PCLK_FREQ=27000000 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set +CONFIG_HEARTBEAT=y + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# SH initrd options +# +CONFIG_EMBEDDED_RAMDISK=y +CONFIG_EMBEDDED_RAMDISK_IMAGE="ramdisk.gz" + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Networking support +# +# CONFIG_NET is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Userland interfaces +# + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +# CONFIG_SERIO is not set +# CONFIG_SERIO_I8042 is not set + +# +# Input Device Drivers +# + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SH_WDT is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +# CONFIG_SYSFS is not set +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +# CONFIG_DEVFS_DEBUG is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_FRAME_POINTER is not set +CONFIG_SH_STANDARD_BIOS=y +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_EARLY_PRINTK is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig new file mode 100644 index 00000000000..e4a14602b16 --- /dev/null +++ b/arch/sh/configs/se7705_defconfig @@ -0,0 +1,714 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-sh +# Wed Mar 2 15:09:45 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_SYSCTL is not set +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System type +# +CONFIG_SH_SOLUTION_ENGINE=y +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP620 is not set +# CONFIG_SH_HP680 is not set +# CONFIG_SH_HP690 is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_UNKNOWN is not set +# CONFIG_CPU_SH2 is not set +CONFIG_CPU_SH3=y +# CONFIG_CPU_SH4 is not set +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +CONFIG_CPU_SUBTYPE_SH7705=y +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_SH7705_CACHE_32KB=y +CONFIG_MMU=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x02000000 +CONFIG_MEMORY_SET=y +# CONFIG_MEMORY_OVERRIDE is not set +# CONFIG_CF_ENABLER is not set +CONFIG_SH_RTC=y +# CONFIG_SH_DSP is not set +# CONFIG_SH_ADC is not set +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_PREEMPT=y +# CONFIG_UBC_WAKEUP is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +# CONFIG_SMP is not set +CONFIG_SH_PCLK_CALC=y +CONFIG_SH_PCLK_FREQ=33333333 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set +CONFIG_HEARTBEAT=y + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# SH initrd options +# +# CONFIG_EMBEDDED_RAMDISK is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_SOLUTIONENGINE=y +CONFIG_MTD_SUPERH_RESERVE=0x300000 +# CONFIG_MTD_MPC1211 is not set +# CONFIG_MTD_RTS7751R2D is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +CONFIG_STNIC=y +# CONFIG_SMC91X is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=y +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +# CONFIG_SYSFS is not set +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_NAND is not set +# CONFIG_JFFS2_FS_NOR_ECC is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_FRAME_POINTER is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig new file mode 100644 index 00000000000..6dc31584752 --- /dev/null +++ b/arch/sh/configs/se7750_defconfig @@ -0,0 +1,713 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-sh +# Wed Mar 2 15:09:46 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System type +# +CONFIG_SH_SOLUTION_ENGINE=y +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP620 is not set +# CONFIG_SH_HP680 is not set +# CONFIG_SH_HP690 is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_UNKNOWN is not set +# CONFIG_CPU_SH2 is not set +# CONFIG_CPU_SH3 is not set +CONFIG_CPU_SH4=y +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +CONFIG_CPU_SUBTYPE_SH7750=y +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_MMU=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC1,38400 root=/dev/nfs ip=bootp" +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x02000000 +CONFIG_MEMORY_SET=y +# CONFIG_MEMORY_OVERRIDE is not set +CONFIG_CF_ENABLER=y +# CONFIG_CF_AREA5 is not set +CONFIG_CF_AREA6=y +CONFIG_CF_BASE_ADDR=0xb8000000 +CONFIG_SH_RTC=y +CONFIG_SH_FPU=y +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_PREEMPT is not set +# CONFIG_UBC_WAKEUP is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +# CONFIG_SH_STORE_QUEUES is not set +# CONFIG_SMP is not set +CONFIG_SH_PCLK_CALC=y +CONFIG_SH_PCLK_FREQ=49876504 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set +CONFIG_HEARTBEAT=y + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_SOLUTIONENGINE=y +CONFIG_MTD_SUPERH_RESERVE=0x00010000 +# CONFIG_MTD_MPC1211 is not set +# CONFIG_MTD_RTS7751R2D is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +CONFIG_STNIC=y +# CONFIG_SMC91X is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Userland interfaces +# + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +# CONFIG_SERIO is not set +# CONFIG_SERIO_I8042 is not set + +# +# Input Device Drivers +# + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_SH_WDT=y +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_NAND is not set +# CONFIG_JFFS2_FS_NOR_ECC is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig new file mode 100644 index 00000000000..1ce02894745 --- /dev/null +++ b/arch/sh/configs/se7751_defconfig @@ -0,0 +1,777 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-sh +# Wed Mar 2 15:09:48 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +CONFIG_SH_7751_SOLUTION_ENGINE=y +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP620 is not set +# CONFIG_SH_HP680 is not set +# CONFIG_SH_HP690 is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_UNKNOWN is not set +# CONFIG_CPU_SH2 is not set +# CONFIG_CPU_SH3 is not set +CONFIG_CPU_SH4=y +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +CONFIG_CPU_SUBTYPE_SH7751=y +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_MMU=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC1,38400" +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_MEMORY_SET=y +# CONFIG_MEMORY_OVERRIDE is not set +CONFIG_SH_RTC=y +CONFIG_SH_FPU=y +CONFIG_ZERO_PAGE_OFFSET=0x00010000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_PREEMPT is not set +# CONFIG_UBC_WAKEUP is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +# CONFIG_SH_STORE_QUEUES is not set +# CONFIG_SMP is not set +CONFIG_SH_PCLK_CALC=y +CONFIG_SH_PCLK_FREQ=60013568 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set +CONFIG_HEARTBEAT=y + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +CONFIG_PCI=y +# CONFIG_SH_PCIDMA_NONCOHERENT is not set +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCI_LEGACY_PROC is not set +# CONFIG_PCI_NAMES is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# SH initrd options +# +# CONFIG_EMBEDDED_RAMDISK is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_SOLUTIONENGINE is not set +# CONFIG_MTD_MPC1211 is not set +# CONFIG_MTD_RTS7751R2D is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_NETLINK_DEV=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +CONFIG_NETFILTER_DEBUG=y + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_CONNTRACK is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +CONFIG_IP_NF_QUEUE=y +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ETHERTAP is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Userland interfaces +# + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +# CONFIG_SERIO is not set +# CONFIG_SERIO_I8042 is not set + +# +# Input Device Drivers +# + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_SH_SCI is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SH_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_NAND is not set +# CONFIG_JFFS2_FS_NOR_ECC is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig new file mode 100644 index 00000000000..078f78c7fe5 --- /dev/null +++ b/arch/sh/configs/sh03_defconfig @@ -0,0 +1,924 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-sh +# Wed Mar 2 15:09:49 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP620 is not set +# CONFIG_SH_HP680 is not set +# CONFIG_SH_HP690 is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +CONFIG_SH_SH03=y +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_UNKNOWN is not set +# CONFIG_CPU_SH2 is not set +# CONFIG_CPU_SH3 is not set +CONFIG_CPU_SH4=y +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +CONFIG_CPU_SUBTYPE_SH7751=y +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_MMU=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs" +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_MEMORY_SET=y +# CONFIG_MEMORY_OVERRIDE is not set +CONFIG_CF_ENABLER=y +CONFIG_CF_AREA5=y +# CONFIG_CF_AREA6 is not set +CONFIG_CF_BASE_ADDR=0xb4000000 +CONFIG_SH_RTC=y +CONFIG_SH_FPU=y +CONFIG_ZERO_PAGE_OFFSET=0x00004000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_PREEMPT=y +# CONFIG_UBC_WAKEUP is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +# CONFIG_SH_STORE_QUEUES is not set +# CONFIG_SMP is not set +CONFIG_SH_PCLK_CALC=y +CONFIG_SH_PCLK_FREQ=49876504 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set +CONFIG_HEARTBEAT=y + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +CONFIG_PCI_LEGACY_PROC=y +CONFIG_PCI_NAMES=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# +CONFIG_HOTPLUG_PCI=m +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +CONFIG_BINFMT_MISC=y + +# +# SH initrd options +# +# CONFIG_EMBEDDED_RAMDISK is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_BLK_DEV_IDECD=m +CONFIG_BLK_DEV_IDETAPE=m +CONFIG_BLK_DEV_IDEFLOPPY=m +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_IDEPCI is not set +CONFIG_IDE_SH=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +CONFIG_SCSI=m +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_CPQFCTS is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_EATA_PIO is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_PCI2000 is not set +# CONFIG_SCSI_PCI2220I is not set +# CONFIG_SCSI_QLOGIC_ISP is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=m +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +CONFIG_8139CP=y +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +# CONFIG_SERIO is not set +# CONFIG_SERIO_I8042 is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_SH_WDT=m + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +# CONFIG_RTC is not set +CONFIG_SH03_RTC=y +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=m +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_FRAME_POINTER is not set +CONFIG_SH_STANDARD_BIOS=y +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_EARLY_PRINTK is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig new file mode 100644 index 00000000000..69cf02a2476 --- /dev/null +++ b/arch/sh/configs/snapgear_defconfig @@ -0,0 +1,699 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-sh +# Wed Mar 2 15:09:51 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_SYSCTL is not set +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP620 is not set +# CONFIG_SH_HP680 is not set +# CONFIG_SH_HP690 is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +CONFIG_SH_SECUREEDGE5410=y +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_UNKNOWN is not set +# CONFIG_CPU_SH2 is not set +# CONFIG_CPU_SH3 is not set +CONFIG_CPU_SH4=y +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +CONFIG_CPU_SUBTYPE_SH7751=y +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_MMU=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x01000000 +CONFIG_MEMORY_SET=y +# CONFIG_MEMORY_OVERRIDE is not set +CONFIG_SH_RTC=y +CONFIG_SH_FPU=y +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_PREEMPT is not set +# CONFIG_UBC_WAKEUP is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +# CONFIG_SH_STORE_QUEUES is not set +# CONFIG_SMP is not set +CONFIG_SH_PCLK_CALC=y +CONFIG_SH_PCLK_FREQ=60013568 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +CONFIG_SH_DMA=y +CONFIG_NR_ONCHIP_DMA_CHANNELS=4 +# CONFIG_NR_DMA_CHANNELS_BOOL is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +CONFIG_PCI=y +# CONFIG_SH_PCIDMA_NONCOHERENT is not set +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCI_LEGACY_PROC is not set +CONFIG_PCI_NAMES=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# SH initrd options +# +# CONFIG_EMBEDDED_RAMDISK is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_NETLINK_DEV is not set +# CONFIG_UNIX is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_SH_SCI is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_SYSFS=y +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +# CONFIG_DEVFS_DEBUG is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig new file mode 100644 index 00000000000..431c9c9da16 --- /dev/null +++ b/arch/sh/configs/systemh_defconfig @@ -0,0 +1,509 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-sh +# Wed Mar 2 15:09:53 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_SYSCTL is not set +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +CONFIG_SH_7751_SYSTEMH=y +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP620 is not set +# CONFIG_SH_HP680 is not set +# CONFIG_SH_HP690 is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_UNKNOWN is not set +# CONFIG_CPU_SH2 is not set +# CONFIG_CPU_SH3 is not set +CONFIG_CPU_SH4=y +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +CONFIG_CPU_SUBTYPE_SH7751=y +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_MMU=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x00400000 +# CONFIG_MEMORY_OVERRIDE is not set +CONFIG_SH_RTC=y +CONFIG_SH_FPU=y +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_PREEMPT=y +# CONFIG_UBC_WAKEUP is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +# CONFIG_SH_STORE_QUEUES is not set +# CONFIG_SMP is not set +CONFIG_SH_PCLK_CALC=y +CONFIG_SH_PCLK_FREQ=49876504 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +CONFIG_PCI=y +# CONFIG_SH_PCIDMA_NONCOHERENT is not set +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +CONFIG_PCI_LEGACY_PROC=y +CONFIG_PCI_NAMES=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# SH initrd options +# +# CONFIG_EMBEDDED_RAMDISK is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=1024 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +# CONFIG_NET is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Userland interfaces +# + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set + +# +# Input Device Drivers +# + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_SH_SCI is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +# CONFIG_DEVFS_DEBUG is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_FRAME_POINTER is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile new file mode 100644 index 00000000000..bd6726cde39 --- /dev/null +++ b/arch/sh/drivers/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the Linux SuperH-specific device drivers. +# + +obj-$(CONFIG_PCI) += pci/ +obj-$(CONFIG_SH_DMA) += dma/ + diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig new file mode 100644 index 00000000000..0f15216cd39 --- /dev/null +++ b/arch/sh/drivers/dma/Kconfig @@ -0,0 +1,55 @@ +menu "DMA support" + +config SH_DMA + bool "DMA controller (DMAC) support" + help + Selecting this option will provide same API as PC's Direct Memory + Access Controller(8237A) for SuperH DMAC. + + If unsure, say N. + +config NR_ONCHIP_DMA_CHANNELS + depends on SH_DMA + int "Number of on-chip DMAC channels" + default "4" + help + This allows you to specify the number of channels that the on-chip + DMAC supports. This will be 4 for SH7750/SH7751 and 8 for the + SH7750R/SH7751R. + +config NR_DMA_CHANNELS_BOOL + depends on SH_DMA + bool "Override default number of maximum DMA channels" + help + This allows you to forcibly update the maximum number of supported + DMA channels for a given board. If this is unset, this will default + to the number of channels that the on-chip DMAC has. + +config NR_DMA_CHANNELS + int "Maximum number of DMA channels" + depends on SH_DMA && NR_DMA_CHANNELS_BOOL + default NR_ONCHIP_DMA_CHANNELS + help + This allows you to specify the maximum number of DMA channels to + support. Setting this to a higher value allows for cascading DMACs + with additional channels. + +config DMA_PAGE_OPS + bool "Use DMAC for page copy/clear" + depends on SH_DMA && BROKEN + help + Selecting this option will use a dual-address mode configured channel + in the SH DMAC for copy_page()/clear_page(). Primarily a performance + hack. + +config DMA_PAGE_OPS_CHANNEL + depends on DMA_PAGE_OPS + int "DMA channel for sh memory-manager page copy/clear" + default "3" + help + This allows the specification of the dual address dma channel, + in case channel 3 is unavailable. On the SH4, channels 1,2, and 3 + are dual-address capable. + +endmenu + diff --git a/arch/sh/drivers/dma/Makefile b/arch/sh/drivers/dma/Makefile new file mode 100644 index 00000000000..065d4c90970 --- /dev/null +++ b/arch/sh/drivers/dma/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the SuperH DMA specific kernel interface routines under Linux. +# + +obj-y += dma-api.o dma-isa.o +obj-$(CONFIG_SYSFS) += dma-sysfs.o +obj-$(CONFIG_SH_DMA) += dma-sh.o +obj-$(CONFIG_SH_DREAMCAST) += dma-pvr2.o dma-g2.o + diff --git a/arch/sh/drivers/dma/dma-api.c b/arch/sh/drivers/dma/dma-api.c new file mode 100644 index 00000000000..96e3036ec2b --- /dev/null +++ b/arch/sh/drivers/dma/dma-api.c @@ -0,0 +1,292 @@ +/* + * arch/sh/drivers/dma/dma-api.c + * + * SuperH-specific DMA management API + * + * Copyright (C) 2003, 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/proc_fs.h> +#include <linux/list.h> +#include <asm/dma.h> + +DEFINE_SPINLOCK(dma_spin_lock); +static LIST_HEAD(registered_dmac_list); + +/* + * A brief note about the reasons for this API as it stands. + * + * For starters, the old ISA DMA API didn't work for us for a number of + * reasons, for one, the vast majority of channels on the SH DMAC are + * dual-address mode only, and both the new and the old DMA APIs are after the + * concept of managing a DMA buffer, which doesn't overly fit this model very + * well. In addition to which, the new API is largely geared at IOMMUs and + * GARTs, and doesn't even support the channel notion very well. + * + * The other thing that's a marginal issue, is the sheer number of random DMA + * engines that are present (ie, in boards like the Dreamcast), some of which + * cascade off of the SH DMAC, and others do not. As such, there was a real + * need for a scalable subsystem that could deal with both single and + * dual-address mode usage, in addition to interoperating with cascaded DMACs. + * + * There really isn't any reason why this needs to be SH specific, though I'm + * not aware of too many other processors (with the exception of some MIPS) + * that have the same concept of a dual address mode, or any real desire to + * actually make use of the DMAC even if such a subsystem were exposed + * elsewhere. + * + * The idea for this was derived from the ARM port, which acted as an excellent + * reference when trying to address these issues. + * + * It should also be noted that the decision to add Yet Another DMA API(tm) to + * the kernel wasn't made easily, and was only decided upon after conferring + * with jejb with regards to the state of the old and new APIs as they applied + * to these circumstances. Philip Blundell was also a great help in figuring + * out some single-address mode DMA semantics that were otherwise rather + * confusing. + */ + +struct dma_info *get_dma_info(unsigned int chan) +{ + struct list_head *pos, *tmp; + unsigned int total = 0; + + /* + * Look for each DMAC's range to determine who the owner of + * the channel is. + */ + list_for_each_safe(pos, tmp, ®istered_dmac_list) { + struct dma_info *info = list_entry(pos, struct dma_info, list); + + total += info->nr_channels; + if (chan > total) + continue; + + return info; + } + + return NULL; +} + +struct dma_channel *get_dma_channel(unsigned int chan) +{ + struct dma_info *info = get_dma_info(chan); + + if (!info) + return ERR_PTR(-EINVAL); + + return info->channels + chan; +} + +int get_dma_residue(unsigned int chan) +{ + struct dma_info *info = get_dma_info(chan); + struct dma_channel *channel = &info->channels[chan]; + + if (info->ops->get_residue) + return info->ops->get_residue(channel); + + return 0; +} + +int request_dma(unsigned int chan, const char *dev_id) +{ + struct dma_info *info = get_dma_info(chan); + struct dma_channel *channel = &info->channels[chan]; + + down(&channel->sem); + + if (!info->ops || chan >= MAX_DMA_CHANNELS) { + up(&channel->sem); + return -EINVAL; + } + + atomic_set(&channel->busy, 1); + + strlcpy(channel->dev_id, dev_id, sizeof(channel->dev_id)); + + up(&channel->sem); + + if (info->ops->request) + return info->ops->request(channel); + + return 0; +} + +void free_dma(unsigned int chan) +{ + struct dma_info *info = get_dma_info(chan); + struct dma_channel *channel = &info->channels[chan]; + + if (info->ops->free) + info->ops->free(channel); + + atomic_set(&channel->busy, 0); +} + +void dma_wait_for_completion(unsigned int chan) +{ + struct dma_info *info = get_dma_info(chan); + struct dma_channel *channel = &info->channels[chan]; + + if (channel->flags & DMA_TEI_CAPABLE) { + wait_event(channel->wait_queue, + (info->ops->get_residue(channel) == 0)); + return; + } + + while (info->ops->get_residue(channel)) + cpu_relax(); +} + +void dma_configure_channel(unsigned int chan, unsigned long flags) +{ + struct dma_info *info = get_dma_info(chan); + struct dma_channel *channel = &info->channels[chan]; + + if (info->ops->configure) + info->ops->configure(channel, flags); +} + +int dma_xfer(unsigned int chan, unsigned long from, + unsigned long to, size_t size, unsigned int mode) +{ + struct dma_info *info = get_dma_info(chan); + struct dma_channel *channel = &info->channels[chan]; + + channel->sar = from; + channel->dar = to; + channel->count = size; + channel->mode = mode; + + return info->ops->xfer(channel); +} + +#ifdef CONFIG_PROC_FS +static int dma_read_proc(char *buf, char **start, off_t off, + int len, int *eof, void *data) +{ + struct list_head *pos, *tmp; + char *p = buf; + + if (list_empty(®istered_dmac_list)) + return 0; + + /* + * Iterate over each registered DMAC + */ + list_for_each_safe(pos, tmp, ®istered_dmac_list) { + struct dma_info *info = list_entry(pos, struct dma_info, list); + int i; + + /* + * Iterate over each channel + */ + for (i = 0; i < info->nr_channels; i++) { + struct dma_channel *channel = info->channels + i; + + if (!(channel->flags & DMA_CONFIGURED)) + continue; + + p += sprintf(p, "%2d: %14s %s\n", i, + info->name, channel->dev_id); + } + } + + return p - buf; +} +#endif + + +int __init register_dmac(struct dma_info *info) +{ + int i; + + INIT_LIST_HEAD(&info->list); + + printk(KERN_INFO "DMA: Registering %s handler (%d channel%s).\n", + info->name, info->nr_channels, + info->nr_channels > 1 ? "s" : ""); + + BUG_ON((info->flags & DMAC_CHANNELS_CONFIGURED) && !info->channels); + + /* + * Don't touch pre-configured channels + */ + if (!(info->flags & DMAC_CHANNELS_CONFIGURED)) { + unsigned int size; + + size = sizeof(struct dma_channel) * info->nr_channels; + + info->channels = kmalloc(size, GFP_KERNEL); + if (!info->channels) + return -ENOMEM; + + memset(info->channels, 0, size); + } + + for (i = 0; i < info->nr_channels; i++) { + struct dma_channel *chan = info->channels + i; + + chan->chan = i; + + memcpy(chan->dev_id, "Unused", 7); + + if (info->flags & DMAC_CHANNELS_TEI_CAPABLE) + chan->flags |= DMA_TEI_CAPABLE; + + init_MUTEX(&chan->sem); + init_waitqueue_head(&chan->wait_queue); + +#ifdef CONFIG_SYSFS + dma_create_sysfs_files(chan); +#endif + } + + list_add(&info->list, ®istered_dmac_list); + + return 0; +} + +void __exit unregister_dmac(struct dma_info *info) +{ + if (!(info->flags & DMAC_CHANNELS_CONFIGURED)) + kfree(info->channels); + + list_del(&info->list); +} + +static int __init dma_api_init(void) +{ + printk("DMA: Registering DMA API.\n"); + +#ifdef CONFIG_PROC_FS + create_proc_read_entry("dma", 0, 0, dma_read_proc, 0); +#endif + + return 0; +} + +subsys_initcall(dma_api_init); + +MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); +MODULE_DESCRIPTION("DMA API for SuperH"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(request_dma); +EXPORT_SYMBOL(free_dma); +EXPORT_SYMBOL(register_dmac); +EXPORT_SYMBOL(get_dma_residue); +EXPORT_SYMBOL(get_dma_info); +EXPORT_SYMBOL(get_dma_channel); +EXPORT_SYMBOL(dma_xfer); +EXPORT_SYMBOL(dma_wait_for_completion); +EXPORT_SYMBOL(dma_configure_channel); + diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c new file mode 100644 index 00000000000..231e3f6fb28 --- /dev/null +++ b/arch/sh/drivers/dma/dma-g2.c @@ -0,0 +1,171 @@ +/* + * arch/sh/drivers/dma/dma-g2.c + * + * G2 bus DMA support + * + * Copyright (C) 2003, 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> + +#include <asm/mach/sysasic.h> +#include <asm/mach/dma.h> +#include <asm/dma.h> + +struct g2_channel { + unsigned long g2_addr; /* G2 bus address */ + unsigned long root_addr; /* Root bus (SH-4) address */ + unsigned long size; /* Size (in bytes), 32-byte aligned */ + unsigned long direction; /* Transfer direction */ + unsigned long ctrl; /* Transfer control */ + unsigned long chan_enable; /* Channel enable */ + unsigned long xfer_enable; /* Transfer enable */ + unsigned long xfer_stat; /* Transfer status */ +} __attribute__ ((aligned(32))); + +struct g2_status { + unsigned long g2_addr; + unsigned long root_addr; + unsigned long size; + unsigned long status; +} __attribute__ ((aligned(16))); + +struct g2_dma_info { + struct g2_channel channel[G2_NR_DMA_CHANNELS]; + unsigned long pad1[G2_NR_DMA_CHANNELS]; + unsigned long wait_state; + unsigned long pad2[10]; + unsigned long magic; + struct g2_status status[G2_NR_DMA_CHANNELS]; +} __attribute__ ((aligned(256))); + +static volatile struct g2_dma_info *g2_dma = (volatile struct g2_dma_info *)0xa05f7800; + +static irqreturn_t g2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + /* FIXME: Do some meaningful completion work here.. */ + return IRQ_HANDLED; +} + +static struct irqaction g2_dma_irq = { + .name = "g2 DMA handler", + .handler = g2_dma_interrupt, + .flags = SA_INTERRUPT, +}; + +static int g2_enable_dma(struct dma_channel *chan) +{ + unsigned int chan_nr = chan->chan; + + g2_dma->channel[chan_nr].chan_enable = 1; + g2_dma->channel[chan_nr].xfer_enable = 1; + + return 0; +} + +static int g2_disable_dma(struct dma_channel *chan) +{ + unsigned int chan_nr = chan->chan; + + g2_dma->channel[chan_nr].chan_enable = 0; + g2_dma->channel[chan_nr].xfer_enable = 0; + + return 0; +} + +static int g2_xfer_dma(struct dma_channel *chan) +{ + unsigned int chan_nr = chan->chan; + + if (chan->sar & 31) { + printk("g2dma: unaligned source 0x%lx\n", chan->sar); + return -EINVAL; + } + + if (chan->dar & 31) { + printk("g2dma: unaligned dest 0x%lx\n", chan->dar); + return -EINVAL; + } + + /* Align the count */ + if (chan->count & 31) + chan->count = (chan->count + (32 - 1)) & ~(32 - 1); + + /* Fixup destination */ + chan->dar += 0xa0800000; + + /* Fixup direction */ + chan->mode = !chan->mode; + + flush_icache_range((unsigned long)chan->sar, chan->count); + + g2_disable_dma(chan); + + g2_dma->channel[chan_nr].g2_addr = chan->dar & 0x1fffffe0; + g2_dma->channel[chan_nr].root_addr = chan->sar & 0x1fffffe0; + g2_dma->channel[chan_nr].size = (chan->count & ~31) | 0x80000000; + g2_dma->channel[chan_nr].direction = chan->mode; + + /* + * bit 0 - ??? + * bit 1 - if set, generate a hardware event on transfer completion + * bit 2 - ??? something to do with suspend? + */ + g2_dma->channel[chan_nr].ctrl = 5; /* ?? */ + + g2_enable_dma(chan); + + /* debug cruft */ + pr_debug("count, sar, dar, mode, ctrl, chan, xfer: %ld, 0x%08lx, " + "0x%08lx, %ld, %ld, %ld, %ld\n", + g2_dma->channel[chan_nr].size, + g2_dma->channel[chan_nr].root_addr, + g2_dma->channel[chan_nr].g2_addr, + g2_dma->channel[chan_nr].direction, + g2_dma->channel[chan_nr].ctrl, + g2_dma->channel[chan_nr].chan_enable, + g2_dma->channel[chan_nr].xfer_enable); + + return 0; +} + +static struct dma_ops g2_dma_ops = { + .xfer = g2_xfer_dma, +}; + +static struct dma_info g2_dma_info = { + .name = "G2 DMA", + .nr_channels = 4, + .ops = &g2_dma_ops, + .flags = DMAC_CHANNELS_TEI_CAPABLE, +}; + +static int __init g2_dma_init(void) +{ + setup_irq(HW_EVENT_G2_DMA, &g2_dma_irq); + + /* Magic */ + g2_dma->wait_state = 27; + g2_dma->magic = 0x4659404f; + + return register_dmac(&g2_dma_info); +} + +static void __exit g2_dma_exit(void) +{ + free_irq(HW_EVENT_G2_DMA, 0); +} + +subsys_initcall(g2_dma_init); +module_exit(g2_dma_exit); + +MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); +MODULE_DESCRIPTION("G2 bus DMA driver"); +MODULE_LICENSE("GPL"); + diff --git a/arch/sh/drivers/dma/dma-isa.c b/arch/sh/drivers/dma/dma-isa.c new file mode 100644 index 00000000000..1c9bc45b8bc --- /dev/null +++ b/arch/sh/drivers/dma/dma-isa.c @@ -0,0 +1,106 @@ +/* + * arch/sh/drivers/dma/dma-isa.c + * + * Generic ISA DMA wrapper for SH DMA API + * + * Copyright (C) 2003, 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <asm/dma.h> + +/* + * This implements a small wrapper set to make code using the old ISA DMA API + * work with the SH DMA API. Since most of the work in the new API happens + * at ops->xfer() time, we simply use the various set_dma_xxx() routines to + * fill in per-channel info, and then hand hand this off to ops->xfer() at + * enable_dma() time. + * + * For channels that are doing on-demand data transfer via cascading, the + * channel itself will still need to be configured through the new API. As + * such, this code is meant for only the simplest of tasks (and shouldn't be + * used in any new drivers at all). + * + * It should also be noted that various functions here are labelled as + * being deprecated. This is due to the fact that the ops->xfer() method is + * the preferred way of doing things (as well as just grabbing the spinlock + * directly). As such, any users of this interface will be warned rather + * loudly. + */ + +unsigned long __deprecated claim_dma_lock(void) +{ + unsigned long flags; + + spin_lock_irqsave(&dma_spin_lock, flags); + + return flags; +} +EXPORT_SYMBOL(claim_dma_lock); + +void __deprecated release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} +EXPORT_SYMBOL(release_dma_lock); + +void __deprecated disable_dma(unsigned int chan) +{ + /* Nothing */ +} +EXPORT_SYMBOL(disable_dma); + +void __deprecated enable_dma(unsigned int chan) +{ + struct dma_info *info = get_dma_info(chan); + struct dma_channel *channel = &info->channels[chan]; + + info->ops->xfer(channel); +} +EXPORT_SYMBOL(enable_dma); + +void clear_dma_ff(unsigned int chan) +{ + /* Nothing */ +} +EXPORT_SYMBOL(clear_dma_ff); + +void set_dma_mode(unsigned int chan, char mode) +{ + struct dma_info *info = get_dma_info(chan); + struct dma_channel *channel = &info->channels[chan]; + + channel->mode = mode; +} +EXPORT_SYMBOL(set_dma_mode); + +void set_dma_addr(unsigned int chan, unsigned int addr) +{ + struct dma_info *info = get_dma_info(chan); + struct dma_channel *channel = &info->channels[chan]; + + /* + * Single address mode is the only thing supported through + * this interface. + */ + if ((channel->mode & DMA_MODE_MASK) == DMA_MODE_READ) { + channel->sar = addr; + } else { + channel->dar = addr; + } +} +EXPORT_SYMBOL(set_dma_addr); + +void set_dma_count(unsigned int chan, unsigned int count) +{ + struct dma_info *info = get_dma_info(chan); + struct dma_channel *channel = &info->channels[chan]; + + channel->count = count; +} +EXPORT_SYMBOL(set_dma_count); + diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c new file mode 100644 index 00000000000..2e1d58f2d1b --- /dev/null +++ b/arch/sh/drivers/dma/dma-pvr2.c @@ -0,0 +1,109 @@ +/* + * arch/sh/boards/dreamcast/dma-pvr2.c + * + * NEC PowerVR 2 (Dreamcast) DMA support + * + * Copyright (C) 2003, 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <asm/mach/sysasic.h> +#include <asm/mach/dma.h> +#include <asm/dma.h> +#include <asm/io.h> + +static unsigned int xfer_complete = 0; +static int count = 0; + +static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + if (get_dma_residue(PVR2_CASCADE_CHAN)) { + printk(KERN_WARNING "DMA: SH DMAC did not complete transfer " + "on channel %d, waiting..\n", PVR2_CASCADE_CHAN); + dma_wait_for_completion(PVR2_CASCADE_CHAN); + } + + if (count++ < 10) + pr_debug("Got a pvr2 dma interrupt for channel %d\n", + irq - HW_EVENT_PVR2_DMA); + + xfer_complete = 1; + + return IRQ_HANDLED; +} + +static int pvr2_request_dma(struct dma_channel *chan) +{ + if (ctrl_inl(PVR2_DMA_MODE) != 0) + return -EBUSY; + + ctrl_outl(0, PVR2_DMA_LMMODE0); + + return 0; +} + +static int pvr2_get_dma_residue(struct dma_channel *chan) +{ + return xfer_complete == 0; +} + +static int pvr2_xfer_dma(struct dma_channel *chan) +{ + if (chan->sar || !chan->dar) + return -EINVAL; + + xfer_complete = 0; + + ctrl_outl(chan->dar, PVR2_DMA_ADDR); + ctrl_outl(chan->count, PVR2_DMA_COUNT); + ctrl_outl(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE); + + return 0; +} + +static struct irqaction pvr2_dma_irq = { + .name = "pvr2 DMA handler", + .handler = pvr2_dma_interrupt, + .flags = SA_INTERRUPT, +}; + +static struct dma_ops pvr2_dma_ops = { + .request = pvr2_request_dma, + .get_residue = pvr2_get_dma_residue, + .xfer = pvr2_xfer_dma, +}; + +static struct dma_info pvr2_dma_info = { + .name = "PowerVR 2 DMA", + .nr_channels = 1, + .ops = &pvr2_dma_ops, + .flags = DMAC_CHANNELS_TEI_CAPABLE, +}; + +static int __init pvr2_dma_init(void) +{ + setup_irq(HW_EVENT_PVR2_DMA, &pvr2_dma_irq); + request_dma(PVR2_CASCADE_CHAN, "pvr2 cascade"); + + return register_dmac(&pvr2_dma_info); +} + +static void __exit pvr2_dma_exit(void) +{ + free_dma(PVR2_CASCADE_CHAN); + free_irq(HW_EVENT_PVR2_DMA, 0); +} + +subsys_initcall(pvr2_dma_init); +module_exit(pvr2_dma_exit); + +MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); +MODULE_DESCRIPTION("NEC PowerVR 2 DMA driver"); +MODULE_LICENSE("GPL"); + diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c new file mode 100644 index 00000000000..31dacd4444b --- /dev/null +++ b/arch/sh/drivers/dma/dma-sh.c @@ -0,0 +1,267 @@ +/* + * arch/sh/drivers/dma/dma-sh.c + * + * SuperH On-chip DMAC Support + * + * Copyright (C) 2000 Takashi YOSHII + * Copyright (C) 2003, 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <asm/signal.h> +#include <asm/irq.h> +#include <asm/dma.h> +#include <asm/io.h> +#include "dma-sh.h" + +/* + * The SuperH DMAC supports a number of transmit sizes, we list them here, + * with their respective values as they appear in the CHCR registers. + * + * Defaults to a 64-bit transfer size. + */ +enum { + XMIT_SZ_64BIT, + XMIT_SZ_8BIT, + XMIT_SZ_16BIT, + XMIT_SZ_32BIT, + XMIT_SZ_256BIT, +}; + +/* + * The DMA count is defined as the number of bytes to transfer. + */ +static unsigned int ts_shift[] = { + [XMIT_SZ_64BIT] = 3, + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + [XMIT_SZ_256BIT] = 5, +}; + +static inline unsigned int get_dmte_irq(unsigned int chan) +{ + unsigned int irq; + + /* + * Normally we could just do DMTE0_IRQ + chan outright, though in the + * case of the 7751R, the DMTE IRQs for channels > 4 start right above + * the SCIF + */ + + if (chan < 4) { + irq = DMTE0_IRQ + chan; + } else { + irq = DMTE4_IRQ + chan - 4; + } + + return irq; +} + +/* + * We determine the correct shift size based off of the CHCR transmit size + * for the given channel. Since we know that it will take: + * + * info->count >> ts_shift[transmit_size] + * + * iterations to complete the transfer. + */ +static inline unsigned int calc_xmit_shift(struct dma_channel *chan) +{ + u32 chcr = ctrl_inl(CHCR[chan->chan]); + + chcr >>= 4; + + return ts_shift[chcr & 0x0007]; +} + +/* + * The transfer end interrupt must read the chcr register to end the + * hardware interrupt active condition. + * Besides that it needs to waken any waiting process, which should handle + * setting up the next transfer. + */ +static irqreturn_t dma_tei(int irq, void *dev_id, struct pt_regs *regs) +{ + struct dma_channel *chan = (struct dma_channel *)dev_id; + u32 chcr; + + chcr = ctrl_inl(CHCR[chan->chan]); + + if (!(chcr & CHCR_TE)) + return IRQ_NONE; + + chcr &= ~(CHCR_IE | CHCR_DE); + ctrl_outl(chcr, CHCR[chan->chan]); + + wake_up(&chan->wait_queue); + + return IRQ_HANDLED; +} + +static int sh_dmac_request_dma(struct dma_channel *chan) +{ + return request_irq(get_dmte_irq(chan->chan), dma_tei, + SA_INTERRUPT, "DMAC Transfer End", chan); +} + +static void sh_dmac_free_dma(struct dma_channel *chan) +{ + free_irq(get_dmte_irq(chan->chan), chan); +} + +static void sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr) +{ + if (!chcr) + chcr = RS_DUAL; + + ctrl_outl(chcr, CHCR[chan->chan]); + + chan->flags |= DMA_CONFIGURED; +} + +static void sh_dmac_enable_dma(struct dma_channel *chan) +{ + int irq = get_dmte_irq(chan->chan); + u32 chcr; + + chcr = ctrl_inl(CHCR[chan->chan]); + chcr |= CHCR_DE | CHCR_IE; + ctrl_outl(chcr, CHCR[chan->chan]); + + enable_irq(irq); +} + +static void sh_dmac_disable_dma(struct dma_channel *chan) +{ + int irq = get_dmte_irq(chan->chan); + u32 chcr; + + disable_irq(irq); + + chcr = ctrl_inl(CHCR[chan->chan]); + chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE); + ctrl_outl(chcr, CHCR[chan->chan]); +} + +static int sh_dmac_xfer_dma(struct dma_channel *chan) +{ + /* + * If we haven't pre-configured the channel with special flags, use + * the defaults. + */ + if (!(chan->flags & DMA_CONFIGURED)) + sh_dmac_configure_channel(chan, 0); + + sh_dmac_disable_dma(chan); + + /* + * Single-address mode usage note! + * + * It's important that we don't accidentally write any value to SAR/DAR + * (this includes 0) that hasn't been directly specified by the user if + * we're in single-address mode. + * + * In this case, only one address can be defined, anything else will + * result in a DMA address error interrupt (at least on the SH-4), + * which will subsequently halt the transfer. + * + * Channel 2 on the Dreamcast is a special case, as this is used for + * cascading to the PVR2 DMAC. In this case, we still need to write + * SAR and DAR, regardless of value, in order for cascading to work. + */ + if (chan->sar || (mach_is_dreamcast() && chan->chan == 2)) + ctrl_outl(chan->sar, SAR[chan->chan]); + if (chan->dar || (mach_is_dreamcast() && chan->chan == 2)) + ctrl_outl(chan->dar, DAR[chan->chan]); + + ctrl_outl(chan->count >> calc_xmit_shift(chan), DMATCR[chan->chan]); + + sh_dmac_enable_dma(chan); + + return 0; +} + +static int sh_dmac_get_dma_residue(struct dma_channel *chan) +{ + if (!(ctrl_inl(CHCR[chan->chan]) & CHCR_DE)) + return 0; + + return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan); +} + +#if defined(CONFIG_CPU_SH4) +static irqreturn_t dma_err(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned long dmaor = ctrl_inl(DMAOR); + + printk("DMAE: DMAOR=%lx\n", dmaor); + + ctrl_outl(ctrl_inl(DMAOR)&~DMAOR_NMIF, DMAOR); + ctrl_outl(ctrl_inl(DMAOR)&~DMAOR_AE, DMAOR); + ctrl_outl(ctrl_inl(DMAOR)|DMAOR_DME, DMAOR); + + disable_irq(irq); + + return IRQ_HANDLED; +} +#endif + +static struct dma_ops sh_dmac_ops = { + .request = sh_dmac_request_dma, + .free = sh_dmac_free_dma, + .get_residue = sh_dmac_get_dma_residue, + .xfer = sh_dmac_xfer_dma, + .configure = sh_dmac_configure_channel, +}; + +static struct dma_info sh_dmac_info = { + .name = "SuperH DMAC", + .nr_channels = 4, + .ops = &sh_dmac_ops, + .flags = DMAC_CHANNELS_TEI_CAPABLE, +}; + +static int __init sh_dmac_init(void) +{ + struct dma_info *info = &sh_dmac_info; + int i; + +#ifdef CONFIG_CPU_SH4 + make_ipr_irq(DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); + i = request_irq(DMAE_IRQ, dma_err, SA_INTERRUPT, "DMAC Address Error", 0); + if (i < 0) + return i; +#endif + + for (i = 0; i < info->nr_channels; i++) { + int irq = get_dmte_irq(i); + + make_ipr_irq(irq, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); + } + + ctrl_outl(0x8000 | DMAOR_DME, DMAOR); + + return register_dmac(info); +} + +static void __exit sh_dmac_exit(void) +{ +#ifdef CONFIG_CPU_SH4 + free_irq(DMAE_IRQ, 0); +#endif +} + +subsys_initcall(sh_dmac_init); +module_exit(sh_dmac_exit); + +MODULE_LICENSE("GPL"); + diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h new file mode 100644 index 00000000000..dd9d547539a --- /dev/null +++ b/arch/sh/drivers/dma/dma-sh.h @@ -0,0 +1,52 @@ +/* + * arch/sh/drivers/dma/dma-sh.h + * + * Copyright (C) 2000 Takashi YOSHII + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __DMA_SH_H +#define __DMA_SH_H + +/* Definitions for the SuperH DMAC */ +#define REQ_L 0x00000000 +#define REQ_E 0x00080000 +#define RACK_H 0x00000000 +#define RACK_L 0x00040000 +#define ACK_R 0x00000000 +#define ACK_W 0x00020000 +#define ACK_H 0x00000000 +#define ACK_L 0x00010000 +#define DM_INC 0x00004000 +#define DM_DEC 0x00008000 +#define SM_INC 0x00001000 +#define SM_DEC 0x00002000 +#define RS_IN 0x00000200 +#define RS_OUT 0x00000300 +#define TM_BURST 0x0000080 +#define TS_8 0x00000010 +#define TS_16 0x00000020 +#define TS_32 0x00000030 +#define TS_64 0x00000000 +#define TS_BLK 0x00000040 +#define CHCR_DE 0x00000001 +#define CHCR_TE 0x00000002 +#define CHCR_IE 0x00000004 + +/* Define the default configuration for dual address memory-memory transfer. + * The 0x400 value represents auto-request, external->external. + */ +#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_32) + +#define DMAOR_COD 0x00000008 +#define DMAOR_AE 0x00000004 +#define DMAOR_NMIF 0x00000002 +#define DMAOR_DME 0x00000001 + +#define MAX_DMAC_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS) + +#endif /* __DMA_SH_H */ + diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c new file mode 100644 index 00000000000..71a6d4e7809 --- /dev/null +++ b/arch/sh/drivers/dma/dma-sysfs.c @@ -0,0 +1,133 @@ +/* + * arch/sh/drivers/dma/dma-sysfs.c + * + * sysfs interface for SH DMA API + * + * Copyright (C) 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysdev.h> +#include <linux/module.h> +#include <asm/dma.h> + +static struct sysdev_class dma_sysclass = { + set_kset_name("dma"), +}; + +EXPORT_SYMBOL(dma_sysclass); + +static ssize_t dma_show_devices(struct sys_device *dev, char *buf) +{ + ssize_t len = 0; + int i; + + for (i = 0; i < MAX_DMA_CHANNELS; i++) { + struct dma_info *info = get_dma_info(i); + struct dma_channel *channel = &info->channels[i]; + + len += sprintf(buf + len, "%2d: %14s %s\n", + channel->chan, info->name, + channel->dev_id); + } + + return len; +} + +static SYSDEV_ATTR(devices, S_IRUGO, dma_show_devices, NULL); + +static int __init dma_sysclass_init(void) +{ + int ret; + + ret = sysdev_class_register(&dma_sysclass); + if (ret == 0) + sysfs_create_file(&dma_sysclass.kset.kobj, &attr_devices.attr); + + return ret; +} + +postcore_initcall(dma_sysclass_init); + +static ssize_t dma_show_dev_id(struct sys_device *dev, char *buf) +{ + struct dma_channel *channel = to_dma_channel(dev); + return sprintf(buf, "%s\n", channel->dev_id); +} + +static ssize_t dma_store_dev_id(struct sys_device *dev, + const char *buf, size_t count) +{ + struct dma_channel *channel = to_dma_channel(dev); + strcpy(channel->dev_id, buf); + return count; +} + +static SYSDEV_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id); + +static ssize_t dma_store_config(struct sys_device *dev, + const char *buf, size_t count) +{ + struct dma_channel *channel = to_dma_channel(dev); + unsigned long config; + + config = simple_strtoul(buf, NULL, 0); + dma_configure_channel(channel->chan, config); + + return count; +} + +static SYSDEV_ATTR(config, S_IWUSR, NULL, dma_store_config); + +static ssize_t dma_show_mode(struct sys_device *dev, char *buf) +{ + struct dma_channel *channel = to_dma_channel(dev); + return sprintf(buf, "0x%08x\n", channel->mode); +} + +static ssize_t dma_store_mode(struct sys_device *dev, + const char *buf, size_t count) +{ + struct dma_channel *channel = to_dma_channel(dev); + channel->mode = simple_strtoul(buf, NULL, 0); + return count; +} + +static SYSDEV_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode); + +#define dma_ro_attr(field, fmt) \ +static ssize_t dma_show_##field(struct sys_device *dev, char *buf) \ +{ \ + struct dma_channel *channel = to_dma_channel(dev); \ + return sprintf(buf, fmt, channel->field); \ +} \ +static SYSDEV_ATTR(field, S_IRUGO, dma_show_##field, NULL); + +dma_ro_attr(count, "0x%08x\n"); +dma_ro_attr(flags, "0x%08lx\n"); + +int __init dma_create_sysfs_files(struct dma_channel *chan) +{ + struct sys_device *dev = &chan->dev; + int ret; + + dev->id = chan->chan; + dev->cls = &dma_sysclass; + + ret = sysdev_register(dev); + if (ret) + return ret; + + sysdev_create_file(dev, &attr_dev_id); + sysdev_create_file(dev, &attr_count); + sysdev_create_file(dev, &attr_mode); + sysdev_create_file(dev, &attr_flags); + sysdev_create_file(dev, &attr_config); + + return 0; +} + diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig new file mode 100644 index 00000000000..6d1cbbe6745 --- /dev/null +++ b/arch/sh/drivers/pci/Kconfig @@ -0,0 +1,41 @@ +config PCI + bool "PCI support" + help + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside + your box. If you have PCI, say Y, otherwise N. + + The PCI-HOWTO, available from + <http://www.tldp.org/docs.html#howto>, contains valuable + information about which PCI hardware does work under Linux and which + doesn't. + +config SH_PCIDMA_NONCOHERENT + bool "Cache and PCI noncoherent" + depends on PCI + default y + help + Enable this option if your platform does not have a CPU cache which + remains coherent with PCI DMA. It is safest to say 'Y', although you + will see better performance if you can say 'N', because the PCI DMA + code will not have to flush the CPU's caches. If you have a PCI host + bridge integrated with your SH CPU, refer carefully to the chip specs + to see if you can say 'N' here. Otherwise, leave it as 'Y'. + +# This is also board-specific +config PCI_AUTO + bool + depends on PCI + default y + +config PCI_AUTO_UPDATE_RESOURCES + bool + depends on PCI_AUTO + default y if !SH_DREAMCAST + help + Selecting this option will cause the PCI auto code to leave your + BAR values alone. Otherwise they will be updated automatically. If + for some reason, you have a board that simply refuses to work + with its resources updated beyond what they are when the device + is powered up, set this to N. Everyone else will want this as Y. + diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile new file mode 100644 index 00000000000..365bc16a4a8 --- /dev/null +++ b/arch/sh/drivers/pci/Makefile @@ -0,0 +1,16 @@ +# +# Makefile for the PCI specific kernel interface routines under Linux. +# + +obj-y += pci.o +obj-$(CONFIG_PCI_AUTO) += pci-auto.o + +obj-$(CONFIG_CPU_SUBTYPE_ST40STB1) += pci-st40.o +obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o + +obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ + dma-dreamcast.o +obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o +obj-$(CONFIG_SH_BIGSUR) += ops-bigsur.o +obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o +obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o diff --git a/arch/sh/drivers/pci/dma-dreamcast.c b/arch/sh/drivers/pci/dma-dreamcast.c new file mode 100644 index 00000000000..83de7ef4e7d --- /dev/null +++ b/arch/sh/drivers/pci/dma-dreamcast.c @@ -0,0 +1,71 @@ +/* + * arch/sh/pci/dma-dreamcast.c + * + * PCI DMA support for the Sega Dreamcast + * + * Copyright (C) 2001, 2002 M. R. Brown + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file originally bore the message (with enclosed-$): + * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp + * Dreamcast PCI: Supports SEGA Broadband Adaptor only. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/device.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/pci.h> + +static int gapspci_dma_used = 0; + +void *dreamcast_consistent_alloc(struct device *dev, size_t size, + dma_addr_t *dma_handle, int flag) +{ + unsigned long buf; + + if (dev && dev->bus != &pci_bus_type) + return NULL; + + if (gapspci_dma_used + size > GAPSPCI_DMA_SIZE) + return ERR_PTR(-EINVAL); + + buf = GAPSPCI_DMA_BASE + gapspci_dma_used; + + gapspci_dma_used = PAGE_ALIGN(gapspci_dma_used+size); + + *dma_handle = (dma_addr_t)buf; + + buf = P2SEGADDR(buf); + + /* Flush the dcache before we hand off the buffer */ + dma_cache_wback_inv((void *)buf, size); + + return (void *)buf; +} + +int dreamcast_consistent_free(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + if (dev && dev->bus != &pci_bus_type) + return -EINVAL; + + /* XXX */ + gapspci_dma_used = 0; + + return 0; +} + diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c new file mode 100644 index 00000000000..cf30e2fa51b --- /dev/null +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -0,0 +1,81 @@ +/* + * arch/sh/pci/fixups-dreamcast.c + * + * PCI fixups for the Sega Dreamcast + * + * Copyright (C) 2001, 2002 M. R. Brown + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file originally bore the message (with enclosed-$): + * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp + * Dreamcast PCI: Supports SEGA Broadband Adaptor only. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/pci.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/pci.h> + +static void __init gapspci_fixup_resources(struct pci_dev *dev) +{ + struct pci_channel *p = board_pci_channels; + + printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev)); + + switch (dev->device) { + case PCI_DEVICE_ID_SEGA_BBA: + /* + * We also assume that dev->devfn == 0 + */ + dev->resource[1].start = p->io_resource->start + 0x100; + dev->resource[1].end = dev->resource[1].start + 0x200 - 1; + break; + default: + printk("PCI: Failed resource fixup\n"); + } +} + +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, gapspci_fixup_resources); + +void __init pcibios_fixup_bus(struct pci_bus *bus) +{ + /* + * We don't have any sub bus to fix up, and this is a rather + * stupid place to put general device fixups. Don't do it. + * Use the pcibios_fixups table or suffer the consequences. + */ +} + +void __init pcibios_fixup_irqs(void) +{ + struct pci_dev *dev = 0; + + for_each_pci_dev(dev) { + /* + * The interrupt routing semantics here are quite trivial. + * + * We basically only support one interrupt, so we only bother + * updating a device's interrupt line with this single shared + * interrupt. Keeps routing quite simple, doesn't it? + */ + printk(KERN_NOTICE "PCI: Fixing up IRQ routing for device %s\n", + pci_name(dev)); + + dev->irq = GAPSPCI_IRQ; + + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } +} + diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c new file mode 100644 index 00000000000..0c590fc7a08 --- /dev/null +++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c @@ -0,0 +1,43 @@ +/* + * arch/sh/drivers/pci/fixups-rts7751r2d.c + * + * RTS7751R2D PCI fixups + * + * Copyright (C) 2003 Lineo uSolutions, Inc. + * Copyright (C) 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include "pci-sh7751.h" +#include <asm/io.h> + +#define PCIMCR_MRSET_OFF 0xBFFFFFFF +#define PCIMCR_RFSH_OFF 0xFFFFFFFB + +int pci_fixup_pcic(void) +{ + unsigned long bcr1, mcr; + + bcr1 = inl(SH7751_BCR1); + bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ + outl(bcr1, PCI_REG(SH7751_PCIBCR1)); + + /* Enable all interrupts, so we known what to fix */ + outl(0x0000c3ff, PCI_REG(SH7751_PCIINTM)); + outl(0x0000380f, PCI_REG(SH7751_PCIAINTM)); + + outl(0xfb900047, PCI_REG(SH7751_PCICONF1)); + outl(0xab000001, PCI_REG(SH7751_PCICONF4)); + + mcr = inl(SH7751_MCR); + mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; + outl(mcr, PCI_REG(SH7751_PCIMCR)); + + outl(0x0c000000, PCI_REG(SH7751_PCICONF5)); + outl(0xd0000000, PCI_REG(SH7751_PCICONF6)); + outl(0x0c000000, PCI_REG(SH7751_PCILAR0)); + outl(0x00000000, PCI_REG(SH7751_PCILAR1)); + return 0; +} diff --git a/arch/sh/drivers/pci/fixups-sh03.c b/arch/sh/drivers/pci/fixups-sh03.c new file mode 100644 index 00000000000..57ac26c2171 --- /dev/null +++ b/arch/sh/drivers/pci/fixups-sh03.c @@ -0,0 +1,61 @@ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/pci.h> + +/* + * IRQ functions + */ + +int __init pcibios_map_platform_irq(u8 slot, u8 pin, struct pci_dev *dev) +{ + int irq; + + if (dev->bus->number == 0) { + switch (slot) { + case 4: return 5; /* eth0 */ + case 8: return 5; /* eth1 */ + case 6: return 2; /* PCI bridge */ + default: + printk("PCI: Bad IRQ mapping request for slot %d\n", slot); + return 2; + } + } else { + switch (pin) { + case 0: irq = 2; break; + case 1: irq = 2; break; + case 2: irq = 2; break; + case 3: irq = 2; break; + case 4: irq = 2; break; + default: irq = -1; break; + } + } + return irq; +} + +static u8 __init sh03_no_swizzle(struct pci_dev *dev, u8 *pin) +{ + /* no swizzling */ + return PCI_SLOT(dev->devfn); +} + +static int sh03_pci_lookup_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq = -1; + + /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */ + irq = pcibios_map_platform_irq(slot, pin, dev); + if( irq < 0 ) { + pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev)); + return irq; + } + + pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq); + + return irq; +} + +void __init pcibios_fixup_irqs(void) +{ + pci_fixup_irqs(sh03_no_swizzle, sh03_pci_lookup_irq); +} diff --git a/arch/sh/drivers/pci/ops-bigsur.c b/arch/sh/drivers/pci/ops-bigsur.c new file mode 100644 index 00000000000..9b43da67804 --- /dev/null +++ b/arch/sh/drivers/pci/ops-bigsur.c @@ -0,0 +1,88 @@ +/* + * linux/arch/sh/kernel/pci-bigsur.c + * + * By Dustin McIntire (dustin@sensoria.com) (c)2001 + * + * Ported to new API by Paul Mundt <lethal@linux-sh.org>. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the Hitachi Big Sur Evaluation Board + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> + +#include <asm/io.h> +#include "pci-sh7751.h" +#include <asm/bigsur/bigsur.h> + +#define BIGSUR_PCI_IO 0x4000 +#define BIGSUR_PCI_MEM 0xfd000000 + +static struct resource sh7751_io_resource = { + .name = "SH7751 IO", + .start = BIGSUR_PCI_IO, + .end = BIGSUR_PCI_IO + (64*1024) - 1, + .flags = IORESOURCE_IO, +}; + +static struct resource sh7751_mem_resource = { + .name = "SH7751 mem", + .start = BIGSUR_PCI_MEM, + .end = BIGSUR_PCI_MEM + (64*1024*1024) - 1, + .flags = IORESOURCE_MEM, +}; + +extern struct pci_ops sh7751_pci_ops; + +struct pci_channel board_pci_channels[] = { + { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { 0, } +}; + +static struct sh7751_pci_address_map sh7751_pci_map = { + .window0 = { + .base = SH7751_CS3_BASE_ADDR, + .size = BIGSUR_LSR0_SIZE, + }, + + .window1 = { + .base = SH7751_CS3_BASE_ADDR, + .size = BIGSUR_LSR1_SIZE, + }, +}; + +/* + * Initialize the Big Sur PCI interface + * Setup hardware to be Central Funtion + * Copy the BSR regs to the PCI interface + * Setup PCI windows into local RAM + */ +int __init pcibios_init_platform(void) +{ + return sh7751_pcic_init(&sh7751_pci_map); +} + +int pcibios_map_platform_irq(u8 slot, u8 pin) +{ + /* + * The Big Sur can be used in a CPCI chassis, but the SH7751 PCI + * interface is on the wrong end of the board so that it can also + * support a V320 CPI interface chip... Therefor the IRQ mapping is + * somewhat use dependent... I'l assume a linear map for now, i.e. + * INTA=slot0,pin0... INTD=slot3,pin0... + */ + int irq = (slot + pin-1) % 4 + BIGSUR_SH7751_PCI_IRQ_BASE; + + PCIDBG(2, "PCI: Mapping Big Sur IRQ for slot %d, pin %c to irq %d\n", + slot, pin-1+'A', irq); + + return irq; +} + diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c new file mode 100644 index 00000000000..69af80b93e3 --- /dev/null +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -0,0 +1,169 @@ +/* + * arch/sh/pci/ops-dreamcast.c + * + * PCI operations for the Sega Dreamcast + * + * Copyright (C) 2001, 2002 M. R. Brown + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file originally bore the message (with enclosed-$): + * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp + * Dreamcast PCI: Supports SEGA Broadband Adaptor only. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/pci.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/pci.h> + +static struct resource gapspci_io_resource = { + .name = "GAPSPCI IO", + .start = GAPSPCI_BBA_CONFIG, + .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1, + .flags = IORESOURCE_IO, +}; + +static struct resource gapspci_mem_resource = { + .name = "GAPSPCI mem", + .start = GAPSPCI_DMA_BASE, + .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct pci_ops gapspci_pci_ops; + +struct pci_channel board_pci_channels[] = { + { &gapspci_pci_ops, &gapspci_io_resource, + &gapspci_mem_resource, 0, 1 }, + { 0, } +}; + +/* + * The !gapspci_config_access case really shouldn't happen, ever, unless + * someone implicitly messes around with the last devfn value.. otherwise we + * only support a single device anyways, and if we didn't have a BBA, we + * wouldn't make it terribly far through the PCI setup anyways. + * + * Also, we could very easily support both Type 0 and Type 1 configurations + * here, but since it doesn't seem that there is any such implementation in + * existance, we don't bother. + * + * I suppose if someone actually gets around to ripping the chip out of + * the BBA and hanging some more devices off of it, then this might be + * something to take into consideration. However, due to the cost of the BBA, + * and the general lack of activity by DC hardware hackers, this doesn't seem + * likely to happen anytime soon. + */ +static int gapspci_config_access(unsigned char bus, unsigned int devfn) +{ + return (bus == 0) && (devfn == 0); +} + +/* + * We can also actually read and write in b/w/l sizes! Thankfully this part + * was at least done right, and we don't have to do the stupid masking and + * shifting that we do on the 7751! Small wonders never cease to amaze. + */ +static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) +{ + *val = 0xffffffff; + + if (!gapspci_config_access(bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (size) { + case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break; + case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break; + case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) +{ + if (!gapspci_config_access(bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (size) { + case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break; + case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break; + case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops gapspci_pci_ops = { + .read = gapspci_read, + .write = gapspci_write, +}; + +/* + * gapspci init + */ + +int __init gapspci_init(void) +{ + char idbuf[16]; + int i; + + /* + * FIXME: All of this wants documenting to some degree, + * even some basic register definitions would be nice. + * + * I haven't seen anything this ugly since.. maple. + */ + + for (i=0; i<16; i++) + idbuf[i] = inb(GAPSPCI_REGS+i); + + if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16)) + return -ENODEV; + + outl(0x5a14a501, GAPSPCI_REGS+0x18); + + for (i=0; i<1000000; i++) + ; + + if (inl(GAPSPCI_REGS+0x18) != 1) + return -EINVAL; + + outl(0x01000000, GAPSPCI_REGS+0x20); + outl(0x01000000, GAPSPCI_REGS+0x24); + + outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28); + outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c); + + outl(1, GAPSPCI_REGS+0x14); + outl(1, GAPSPCI_REGS+0x34); + + /* Setting Broadband Adapter */ + outw(0xf900, GAPSPCI_BBA_CONFIG+0x06); + outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30); + outb(0x00, GAPSPCI_BBA_CONFIG+0x3c); + outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d); + outw(0x0006, GAPSPCI_BBA_CONFIG+0x04); + outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10); + outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14); + + return 0; +} + +/* Haven't done anything here as yet */ +char * __devinit pcibios_setup(char *str) +{ + return str; +} diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c new file mode 100644 index 00000000000..beafa11f4d0 --- /dev/null +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -0,0 +1,79 @@ +/* + * linux/arch/sh/kernel/pci-rts7751r2d.c + * + * Author: Ian DaSilva (idasilva@mvista.com) + * + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the Renesas SH7751R RTS7751R2D board + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/module.h> + +#include <asm/io.h> +#include "pci-sh7751.h" +#include <asm/rts7751r2d/rts7751r2d.h> + +int __init pcibios_map_platform_irq(u8 slot, u8 pin) +{ + switch (slot) { + case 0: return IRQ_PCISLOT1; /* PCI Extend slot #1 */ + case 1: return IRQ_PCISLOT2; /* PCI Extend slot #2 */ + case 2: return IRQ_PCMCIA; /* PCI Cardbus Bridge */ + case 3: return IRQ_PCIETH; /* Realtek Ethernet controller */ + default: + printk("PCI: Bad IRQ mapping request for slot %d\n", slot); + return -1; + } +} + +static struct resource sh7751_io_resource = { + .name = "SH7751_IO", + .start = 0x4000, + .end = 0x4000 + SH7751_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7751_mem_resource = { + .name = "SH7751_mem", + .start = SH7751_PCI_MEMORY_BASE, + .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +extern struct pci_ops sh7751_pci_ops; + +struct pci_channel board_pci_channels[] = { + { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); + +static struct sh7751_pci_address_map sh7751_pci_map = { + .window0 = { + .base = SH7751_CS3_BASE_ADDR, + .size = 0x04000000, + }, + + .window1 = { + .base = 0x00000000, /* Unused */ + .size = 0x00000000, /* Unused */ + }, + + .flags = SH7751_PCIC_NO_RESET, +}; + +int __init pcibios_init_platform(void) +{ + return sh7751_pcic_init(&sh7751_pci_map); +} + diff --git a/arch/sh/drivers/pci/ops-sh03.c b/arch/sh/drivers/pci/ops-sh03.c new file mode 100644 index 00000000000..df219973234 --- /dev/null +++ b/arch/sh/drivers/pci/ops-sh03.c @@ -0,0 +1,45 @@ +/* + * linux/arch/sh/drivers/pci/ops-sh03.c + * + * PCI initialization for the Interface CTP/PCI-SH03 board + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <asm/io.h> +#include "pci-sh7751.h" + +/* + * Description: This function sets up and initializes the pcic, sets + * up the BARS, maps the DRAM into the address space etc, etc. + */ +int __init pcibios_init_platform(void) +{ + return 1; +} + +static struct resource sh7751_io_resource = { + .name = "SH03 IO", + .start = SH7751_PCI_IO_BASE, + .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7751_mem_resource = { + .name = "SH03 mem", + .start = SH7751_PCI_MEMORY_BASE, + .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +extern struct pci_ops sh7751_pci_ops; + +struct pci_channel board_pci_channels[] = { + { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; + diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c new file mode 100644 index 00000000000..6fdb9765c99 --- /dev/null +++ b/arch/sh/drivers/pci/ops-snapgear.c @@ -0,0 +1,102 @@ +/* + * arch/sh/drivers/pci/ops-snapgear.c + * + * Author: David McCullough <davidm@snapgear.com> + * + * Ported to new API by Paul Mundt <lethal@linux-sh.org> + * + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the SnapGear boards + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> + +#include <asm/io.h> +#include "pci-sh7751.h" + +#define SNAPGEAR_PCI_IO 0x4000 +#define SNAPGEAR_PCI_MEM 0xfd000000 + +/* PCI: default LOCAL memory window sizes (seen from PCI bus) */ +#define SNAPGEAR_LSR0_SIZE (64*(1<<20)) //64MB +#define SNAPGEAR_LSR1_SIZE (64*(1<<20)) //64MB + +static struct resource sh7751_io_resource = { + .name = "SH7751 IO", + .start = SNAPGEAR_PCI_IO, + .end = SNAPGEAR_PCI_IO + (64*1024) - 1, /* 64KiB I/O */ + .flags = IORESOURCE_IO, +}; + +static struct resource sh7751_mem_resource = { + .name = "SH7751 mem", + .start = SNAPGEAR_PCI_MEM, + .end = SNAPGEAR_PCI_MEM + (64*1024*1024) - 1, /* 64MiB mem */ + .flags = IORESOURCE_MEM, +}; + +extern struct pci_ops sh7751_pci_ops; + +struct pci_channel board_pci_channels[] = { + { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { 0, } +}; + +static struct sh7751_pci_address_map sh7751_pci_map = { + .window0 = { + .base = SH7751_CS2_BASE_ADDR, + .size = SNAPGEAR_LSR0_SIZE, + }, + + .window1 = { + .base = SH7751_CS2_BASE_ADDR, + .size = SNAPGEAR_LSR1_SIZE, + }, + + .flags = SH7751_PCIC_NO_RESET, +}; + +/* + * Initialize the SnapGear PCI interface + * Setup hardware to be Central Funtion + * Copy the BSR regs to the PCI interface + * Setup PCI windows into local RAM + */ +int __init pcibios_init_platform(void) +{ + return sh7751_pcic_init(&sh7751_pci_map); +} + +int __init pcibios_map_platform_irq(u8 slot, u8 pin) +{ + int irq = -1; + + switch (slot) { + case 8: /* the PCI bridge */ break; + case 11: irq = 8; break; /* USB */ + case 12: irq = 11; break; /* PCMCIA */ + case 13: irq = 5; break; /* eth0 */ + case 14: irq = 8; break; /* eth1 */ + case 15: irq = 11; break; /* safenet (unused) */ + } + + printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n", + slot, pin - 1 + 'A', irq); + + return irq; +} + +void __init pcibios_fixup(void) +{ + /* Nothing to fixup .. */ +} + diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c new file mode 100644 index 00000000000..4cef4d1d8c8 --- /dev/null +++ b/arch/sh/drivers/pci/pci-auto.c @@ -0,0 +1,555 @@ +/* + * PCI autoconfiguration library + * + * Author: Matt Porter <mporter@mvista.com> + * + * Copyright 2000, 2001 MontaVista Software Inc. + * Copyright 2001 Bradley D. LaRonde <brad@ltc.com> + * Copyright 2003 Paul Mundt <lethal@linux-sh.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/* + * Modified for MIPS by Jun Sun, jsun@mvista.com + * + * . Simplify the interface between pci_auto and the rest: a single function. + * . Assign resources from low address to upper address. + * . change most int to u32. + * + * Further modified to include it as mips generic code, ppopov@mvista.com. + * + * 2001-10-26 Bradley D. LaRonde <brad@ltc.com> + * - Add a top_bus argument to the "early config" functions so that + * they can set a fake parent bus pointer to convince the underlying + * pci ops to use type 1 configuration for sub busses. + * - Set bridge base and limit registers correctly. + * - Align io and memory base properly before and after bridge setup. + * - Don't fall through to pci_setup_bars for bridge. + * - Reformat the debug output to look more like lspci's output. + * + * Cloned for SuperH by M. R. Brown, mrbrown@0xd6.org + * + * 2003-08-05 Paul Mundt <lethal@linux-sh.org> + * - Don't update the BAR values on systems that already have valid addresses + * and don't want these updated for whatever reason, by way of a new config + * option check. However, we still read in the old BAR values so that they + * can still be reported through the debug output. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/pci.h> + +#undef DEBUG +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +/* + * These functions are used early on before PCI scanning is done + * and all of the pci_dev and pci_bus structures have been created. + */ +static struct pci_dev *fake_pci_dev(struct pci_channel *hose, + int top_bus, int busnr, int devfn) +{ + static struct pci_dev dev; + static struct pci_bus bus; + + dev.bus = &bus; + dev.sysdata = hose; + dev.devfn = devfn; + bus.number = busnr; + bus.ops = hose->pci_ops; + + if(busnr != top_bus) + /* Fake a parent bus structure. */ + bus.parent = &bus; + else + bus.parent = NULL; + + return &dev; +} + +#define EARLY_PCI_OP(rw, size, type) \ +int early_##rw##_config_##size(struct pci_channel *hose, \ + int top_bus, int bus, int devfn, int offset, type value) \ +{ \ + return pci_##rw##_config_##size( \ + fake_pci_dev(hose, top_bus, bus, devfn), \ + offset, value); \ +} + +EARLY_PCI_OP(read, byte, u8 *) +EARLY_PCI_OP(read, word, u16 *) +EARLY_PCI_OP(read, dword, u32 *) +EARLY_PCI_OP(write, byte, u8) +EARLY_PCI_OP(write, word, u16) +EARLY_PCI_OP(write, dword, u32) + +static struct resource *io_resource_inuse; +static struct resource *mem_resource_inuse; + +static u32 pciauto_lower_iospc; +static u32 pciauto_upper_iospc; + +static u32 pciauto_lower_memspc; +static u32 pciauto_upper_memspc; + +static void __init +pciauto_setup_bars(struct pci_channel *hose, + int top_bus, + int current_bus, + int pci_devfn, + int bar_limit) +{ + u32 bar_response, bar_size, bar_value; + u32 bar, addr_mask, bar_nr = 0; + u32 * upper_limit; + u32 * lower_limit; + int found_mem64 = 0; + + for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) { +#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) + u32 bar_addr; + + /* Read the old BAR value */ + early_read_config_dword(hose, top_bus, + current_bus, + pci_devfn, + bar, + &bar_addr); +#endif + + /* Tickle the BAR and get the response */ + early_write_config_dword(hose, top_bus, + current_bus, + pci_devfn, + bar, + 0xffffffff); + + early_read_config_dword(hose, top_bus, + current_bus, + pci_devfn, + bar, + &bar_response); + +#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) + /* + * Write the old BAR value back out, only update the BAR + * if we implicitly want resources to be updated, which + * is done by the generic code further down. -- PFM. + */ + early_write_config_dword(hose, top_bus, + current_bus, + pci_devfn, + bar, + bar_addr); +#endif + + /* If BAR is not implemented go to the next BAR */ + if (!bar_response) + continue; + + /* + * Workaround for a BAR that doesn't use its upper word, + * like the ALi 1535D+ PCI DC-97 Controller Modem (M5457). + * bdl <brad@ltc.com> + */ + if (!(bar_response & 0xffff0000)) + bar_response |= 0xffff0000; + +retry: + /* Check the BAR type and set our address mask */ + if (bar_response & PCI_BASE_ADDRESS_SPACE) { + addr_mask = PCI_BASE_ADDRESS_IO_MASK; + upper_limit = &pciauto_upper_iospc; + lower_limit = &pciauto_lower_iospc; + DBG(" I/O"); + } else { + if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == + PCI_BASE_ADDRESS_MEM_TYPE_64) + found_mem64 = 1; + + addr_mask = PCI_BASE_ADDRESS_MEM_MASK; + upper_limit = &pciauto_upper_memspc; + lower_limit = &pciauto_lower_memspc; + DBG(" Mem"); + } + + + /* Calculate requested size */ + bar_size = ~(bar_response & addr_mask) + 1; + + /* Allocate a base address */ + bar_value = ((*lower_limit - 1) & ~(bar_size - 1)) + bar_size; + + if ((bar_value + bar_size) > *upper_limit) { + if (bar_response & PCI_BASE_ADDRESS_SPACE) { + if (io_resource_inuse->child) { + io_resource_inuse = + io_resource_inuse->child; + pciauto_lower_iospc = + io_resource_inuse->start; + pciauto_upper_iospc = + io_resource_inuse->end + 1; + goto retry; + } + + } else { + if (mem_resource_inuse->child) { + mem_resource_inuse = + mem_resource_inuse->child; + pciauto_lower_memspc = + mem_resource_inuse->start; + pciauto_upper_memspc = + mem_resource_inuse->end + 1; + goto retry; + } + } + DBG(" unavailable -- skipping, value %x size %x\n", + bar_value, bar_size); + continue; + } + +#ifdef CONFIG_PCI_AUTO_UPDATE_RESOURCES + /* Write it out and update our limit */ + early_write_config_dword(hose, top_bus, current_bus, pci_devfn, + bar, bar_value); +#endif + + *lower_limit = bar_value + bar_size; + + /* + * If we are a 64-bit decoder then increment to the + * upper 32 bits of the bar and force it to locate + * in the lower 4GB of memory. + */ + if (found_mem64) { + bar += 4; + early_write_config_dword(hose, top_bus, + current_bus, + pci_devfn, + bar, + 0x00000000); + } + + DBG(" at 0x%.8x [size=0x%x]\n", bar_value, bar_size); + + bar_nr++; + } + +} + +static void __init +pciauto_prescan_setup_bridge(struct pci_channel *hose, + int top_bus, + int current_bus, + int pci_devfn, + int sub_bus) +{ + /* Configure bus number registers */ + early_write_config_byte(hose, top_bus, current_bus, pci_devfn, + PCI_PRIMARY_BUS, current_bus); + early_write_config_byte(hose, top_bus, current_bus, pci_devfn, + PCI_SECONDARY_BUS, sub_bus + 1); + early_write_config_byte(hose, top_bus, current_bus, pci_devfn, + PCI_SUBORDINATE_BUS, 0xff); + + /* Align memory and I/O to 1MB and 4KB boundaries. */ + pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1)) + & ~(0x100000 - 1); + pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1)) + & ~(0x1000 - 1); + + /* Set base (lower limit) of address range behind bridge. */ + early_write_config_word(hose, top_bus, current_bus, pci_devfn, + PCI_MEMORY_BASE, pciauto_lower_memspc >> 16); + early_write_config_byte(hose, top_bus, current_bus, pci_devfn, + PCI_IO_BASE, (pciauto_lower_iospc & 0x0000f000) >> 8); + early_write_config_word(hose, top_bus, current_bus, pci_devfn, + PCI_IO_BASE_UPPER16, pciauto_lower_iospc >> 16); + + /* We don't support prefetchable memory for now, so disable */ + early_write_config_word(hose, top_bus, current_bus, pci_devfn, + PCI_PREF_MEMORY_BASE, 0); + early_write_config_word(hose, top_bus, current_bus, pci_devfn, + PCI_PREF_MEMORY_LIMIT, 0); +} + +static void __init +pciauto_postscan_setup_bridge(struct pci_channel *hose, + int top_bus, + int current_bus, + int pci_devfn, + int sub_bus) +{ + u32 temp; + + /* + * [jsun] we always bump up baselines a little, so that if there + * nothing behind P2P bridge, we don't wind up overlapping IO/MEM + * spaces. + */ + pciauto_lower_memspc += 1; + pciauto_lower_iospc += 1; + + /* Configure bus number registers */ + early_write_config_byte(hose, top_bus, current_bus, pci_devfn, + PCI_SUBORDINATE_BUS, sub_bus); + + /* Set upper limit of address range behind bridge. */ + early_write_config_word(hose, top_bus, current_bus, pci_devfn, + PCI_MEMORY_LIMIT, pciauto_lower_memspc >> 16); + early_write_config_byte(hose, top_bus, current_bus, pci_devfn, + PCI_IO_LIMIT, (pciauto_lower_iospc & 0x0000f000) >> 8); + early_write_config_word(hose, top_bus, current_bus, pci_devfn, + PCI_IO_LIMIT_UPPER16, pciauto_lower_iospc >> 16); + + /* Align memory and I/O to 1MB and 4KB boundaries. */ + pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1)) + & ~(0x100000 - 1); + pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1)) + & ~(0x1000 - 1); + + /* Enable memory and I/O accesses, enable bus master */ + early_read_config_dword(hose, top_bus, current_bus, pci_devfn, + PCI_COMMAND, &temp); + early_write_config_dword(hose, top_bus, current_bus, pci_devfn, + PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY + | PCI_COMMAND_MASTER); +} + +static void __init +pciauto_prescan_setup_cardbus_bridge(struct pci_channel *hose, + int top_bus, + int current_bus, + int pci_devfn, + int sub_bus) +{ + /* Configure bus number registers */ + early_write_config_byte(hose, top_bus, current_bus, pci_devfn, + PCI_PRIMARY_BUS, current_bus); + early_write_config_byte(hose, top_bus, current_bus, pci_devfn, + PCI_SECONDARY_BUS, sub_bus + 1); + early_write_config_byte(hose, top_bus, current_bus, pci_devfn, + PCI_SUBORDINATE_BUS, 0xff); + + /* Align memory and I/O to 4KB and 4 byte boundaries. */ + pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1)) + & ~(0x1000 - 1); + pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1)) + & ~(0x4 - 1); + + early_write_config_dword(hose, top_bus, current_bus, pci_devfn, + PCI_CB_MEMORY_BASE_0, pciauto_lower_memspc); + early_write_config_dword(hose, top_bus, current_bus, pci_devfn, + PCI_CB_IO_BASE_0, pciauto_lower_iospc); +} + +static void __init +pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose, + int top_bus, + int current_bus, + int pci_devfn, + int sub_bus) +{ + u32 temp; + +#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) + /* + * [jsun] we always bump up baselines a little, so that if there + * nothing behind P2P bridge, we don't wind up overlapping IO/MEM + * spaces. + */ + pciauto_lower_memspc += 1; + pciauto_lower_iospc += 1; +#endif + + /* + * Configure subordinate bus number. The PCI subsystem + * bus scan will renumber buses (reserving three additional + * for this PCI<->CardBus bridge for the case where a CardBus + * adapter contains a P2P or CB2CB bridge. + */ + + early_write_config_byte(hose, top_bus, current_bus, pci_devfn, + PCI_SUBORDINATE_BUS, sub_bus); + + /* + * Reserve an additional 4MB for mem space and 16KB for + * I/O space. This should cover any additional space + * requirement of unusual CardBus devices with + * additional bridges that can consume more address space. + * + * Although pcmcia-cs currently will reprogram bridge + * windows, the goal is to add an option to leave them + * alone and use the bridge window ranges as the regions + * that are searched for free resources upon hot-insertion + * of a device. This will allow a PCI<->CardBus bridge + * configured by this routine to happily live behind a + * P2P bridge in a system. + */ +#if defined(CONFIG_SH_HS7751RVOIP) || defined(CONFIG_SH_RTS7751R2D) + pciauto_lower_memspc += 0x00400000; + pciauto_lower_iospc += 0x00004000; +#endif + + /* Align memory and I/O to 4KB and 4 byte boundaries. */ + pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1)) + & ~(0x1000 - 1); + pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1)) + & ~(0x4 - 1); + /* Set up memory and I/O filter limits, assume 32-bit I/O space */ + early_write_config_dword(hose, top_bus, current_bus, pci_devfn, + PCI_CB_MEMORY_LIMIT_0, pciauto_lower_memspc - 1); + early_write_config_dword(hose, top_bus, current_bus, pci_devfn, + PCI_CB_IO_LIMIT_0, pciauto_lower_iospc - 1); + + /* Enable memory and I/O accesses, enable bus master */ + early_read_config_dword(hose, top_bus, current_bus, pci_devfn, + PCI_COMMAND, &temp); + early_write_config_dword(hose, top_bus, current_bus, pci_devfn, + PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER); +} + +#define PCIAUTO_IDE_MODE_MASK 0x05 + +static int __init +pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus) +{ + int sub_bus; + u32 pci_devfn, pci_class, cmdstat, found_multi=0; + unsigned short vid, did; + unsigned char header_type; + int devfn_start = 0; + int devfn_stop = 0xff; + + sub_bus = current_bus; + + if (hose->first_devfn) + devfn_start = hose->first_devfn; + if (hose->last_devfn) + devfn_stop = hose->last_devfn; + + for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) { + + if (PCI_FUNC(pci_devfn) && !found_multi) + continue; + + early_read_config_word(hose, top_bus, current_bus, pci_devfn, + PCI_VENDOR_ID, &vid); + + if (vid == 0xffff) continue; + + early_read_config_byte(hose, top_bus, current_bus, pci_devfn, + PCI_HEADER_TYPE, &header_type); + + if (!PCI_FUNC(pci_devfn)) + found_multi = header_type & 0x80; + + early_read_config_word(hose, top_bus, current_bus, pci_devfn, + PCI_DEVICE_ID, &did); + + early_read_config_dword(hose, top_bus, current_bus, pci_devfn, + PCI_CLASS_REVISION, &pci_class); + + DBG("%.2x:%.2x.%x Class %.4x: %.4x:%.4x", + current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn), + pci_class >> 16, vid, did); + if (pci_class & 0xff) + DBG(" (rev %.2x)", pci_class & 0xff); + DBG("\n"); + + if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) { + DBG(" Bridge: primary=%.2x, secondary=%.2x\n", + current_bus, sub_bus + 1); +#if defined(CONFIG_SH_HS7751RVOIP) || defined(CONFIG_SH_RTS7751R2D) + pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_1); +#endif + pciauto_prescan_setup_bridge(hose, top_bus, current_bus, + pci_devfn, sub_bus); + DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n", + sub_bus + 1, + pciauto_lower_iospc, pciauto_lower_memspc); + sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1); + DBG("Back to bus %.2x\n", current_bus); + pciauto_postscan_setup_bridge(hose, top_bus, current_bus, + pci_devfn, sub_bus); + continue; + } else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) { + DBG(" CARDBUS Bridge: primary=%.2x, secondary=%.2x\n", + current_bus, sub_bus + 1); + DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn)); + /* Place CardBus Socket/ExCA registers */ + pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_0); + + pciauto_prescan_setup_cardbus_bridge(hose, top_bus, + current_bus, pci_devfn, sub_bus); + + DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n", + sub_bus + 1, + pciauto_lower_iospc, pciauto_lower_memspc); + sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1); + DBG("Back to bus %.2x, sub_bus is %x\n", current_bus, sub_bus); + pciauto_postscan_setup_cardbus_bridge(hose, top_bus, + current_bus, pci_devfn, sub_bus); + continue; + } else if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) { + + unsigned char prg_iface; + + early_read_config_byte(hose, top_bus, current_bus, + pci_devfn, PCI_CLASS_PROG, &prg_iface); + if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) { + DBG("Skipping legacy mode IDE controller\n"); + continue; + } + } + + /* + * Found a peripheral, enable some standard + * settings + */ + early_read_config_dword(hose, top_bus, current_bus, pci_devfn, + PCI_COMMAND, &cmdstat); + early_write_config_dword(hose, top_bus, current_bus, pci_devfn, + PCI_COMMAND, cmdstat | PCI_COMMAND_IO | + PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER); +#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) + early_write_config_byte(hose, top_bus, current_bus, pci_devfn, + PCI_LATENCY_TIMER, 0x80); +#endif + + /* Allocate PCI I/O and/or memory space */ + pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5); + } + return sub_bus; +} + +int __init +pciauto_assign_resources(int busno, struct pci_channel *hose) +{ + /* setup resource limits */ + io_resource_inuse = hose->io_resource; + mem_resource_inuse = hose->mem_resource; + + pciauto_lower_iospc = io_resource_inuse->start; + pciauto_upper_iospc = io_resource_inuse->end + 1; + pciauto_lower_memspc = mem_resource_inuse->start; + pciauto_upper_memspc = mem_resource_inuse->end + 1; + DBG("Autoconfig PCI channel 0x%p\n", hose); + DBG("Scanning bus %.2x, I/O 0x%.8x:0x%.8x, Mem 0x%.8x:0x%.8x\n", + busno, pciauto_lower_iospc, pciauto_upper_iospc, + pciauto_lower_memspc, pciauto_upper_memspc); + + return pciauto_bus_scan(hose, busno, busno); +} diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c new file mode 100644 index 00000000000..30b14ac7ae5 --- /dev/null +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -0,0 +1,417 @@ +/* + * Low-Level PCI Support for the SH7751 + * + * Dustin McIntire (dustin@sensoria.com) + * Derived from arch/i386/kernel/pci-*.c which bore the message: + * (c) 1999--2000 Martin Mares <mj@ucw.cz> + * + * Ported to the new API by Paul Mundt <lethal@linux-sh.org> + * With cleanup by Paul van Gool <pvangool@mimotech.com> + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/errno.h> +#include <linux/irq.h> +#include <linux/delay.h> + +#include <asm/machvec.h> +#include <asm/io.h> +#include "pci-sh7751.h" + +static unsigned int pci_probe = PCI_PROBE_CONF1; +extern int pci_fixup_pcic(void); + +void pcibios_fixup_irqs(void) __attribute__ ((weak)); + +/* + * Direct access to PCI hardware... + */ + +#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) + +/* + * Functions for accessing PCI configuration space with type 1 accesses + */ +static int sh7751_pci_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + unsigned long flags; + u32 data; + + /* + * PCIPDR may only be accessed as 32 bit words, + * so we must do byte alignment by hand + */ + local_irq_save(flags); + outl(CONFIG_CMD(bus,devfn,where), PCI_REG(SH7751_PCIPAR)); + data = inl(PCI_REG(SH7751_PCIPDR)); + local_irq_restore(flags); + + switch (size) { + case 1: + *val = (data >> ((where & 3) << 3)) & 0xff; + break; + case 2: + *val = (data >> ((where & 2) << 3)) & 0xffff; + break; + case 4: + *val = data; + break; + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + return PCIBIOS_SUCCESSFUL; +} + +/* + * Since SH7751 only does 32bit access we'll have to do a read, + * mask,write operation. + * We'll allow an odd byte offset, though it should be illegal. + */ +static int sh7751_pci_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + unsigned long flags; + int shift; + u32 data; + + local_irq_save(flags); + outl(CONFIG_CMD(bus,devfn,where), PCI_REG(SH7751_PCIPAR)); + data = inl(PCI_REG(SH7751_PCIPDR)); + local_irq_restore(flags); + + switch (size) { + case 1: + shift = (where & 3) << 3; + data &= ~(0xff << shift); + data |= ((val & 0xff) << shift); + break; + case 2: + shift = (where & 2) << 3; + data &= ~(0xffff << shift); + data |= ((val & 0xffff) << shift); + break; + case 4: + data = val; + break; + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + outl(data, PCI_REG(SH7751_PCIPDR)); + + return PCIBIOS_SUCCESSFUL; +} + +#undef CONFIG_CMD + +struct pci_ops sh7751_pci_ops = { + .read = sh7751_pci_read, + .write = sh7751_pci_write, +}; + +static int __init pci_check_direct(void) +{ + unsigned int tmp, id; + + /* check for SH7751/SH7751R hardware */ + id = inl(SH7751_PCIREG_BASE+SH7751_PCICONF0); + if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && + id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { + pr_debug("PCI: This is not an SH7751(R) (%x)\n", id); + return -ENODEV; + } + + /* + * Check if configuration works. + */ + if (pci_probe & PCI_PROBE_CONF1) { + tmp = inl (PCI_REG(SH7751_PCIPAR)); + outl (0x80000000, PCI_REG(SH7751_PCIPAR)); + if (inl (PCI_REG(SH7751_PCIPAR)) == 0x80000000) { + outl (tmp, PCI_REG(SH7751_PCIPAR)); + printk(KERN_INFO "PCI: Using configuration type 1\n"); + request_region(PCI_REG(SH7751_PCIPAR), 8, "PCI conf1"); + return 0; + } + outl (tmp, PCI_REG(SH7751_PCIPAR)); + } + + pr_debug("PCI: pci_check_direct failed\n"); + return -EINVAL; +} + +/***************************************************************************************/ + +/* + * Handle bus scanning and fixups .... + */ + +static void __init pci_fixup_ide_bases(struct pci_dev *d) +{ + int i; + + /* + * PCI IDE controllers use non-standard I/O port decoding, respect it. + */ + if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d)); + for(i=0; i<4; i++) { + struct resource *r = &d->resource[i]; + if ((r->start & ~0x80) == 0x374) { + r->start |= 2; + r->end = r->start; + } + } +} + +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); + +/* + * Called after each bus is probed, but before its children + * are examined. + */ + +void __init pcibios_fixup_bus(struct pci_bus *b) +{ + pci_read_bridge_bases(b); +} + +/* + * Initialization. Try all known PCI access methods. Note that we support + * using both PCI BIOS and direct access: in such cases, we use I/O ports + * to access config space. + * + * Note that the platform specific initialization (BSC registers, and memory + * space mapping) will be called via the machine vectors (sh_mv.mv_pci_init()) if it + * exitst and via the platform defined function pcibios_init_platform(). + * See pci_bigsur.c for implementation; + * + * The BIOS version of the pci functions is not yet implemented but it is left + * in for completeness. Currently an error will be genereated at compile time. + */ + +static int __init sh7751_pci_init(void) +{ + int ret; + + pr_debug("PCI: Starting intialization.\n"); + if ((ret = pci_check_direct()) != 0) + return ret; + + return pcibios_init_platform(); +} + +subsys_initcall(sh7751_pci_init); + +static int __init __area_sdram_check(unsigned int area) +{ + u32 word; + + word = inl(SH7751_BCR1); + /* check BCR for SDRAM in area */ + if(((word >> area) & 1) == 0) { + printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n", + area, word); + return 0; + } + outl(word, PCI_REG(SH7751_PCIBCR1)); + + word = (u16)inw(SH7751_BCR2); + /* check BCR2 for 32bit SDRAM interface*/ + if(((word >> (area << 1)) & 0x3) != 0x3) { + printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n", + area, word); + return 0; + } + outl(word, PCI_REG(SH7751_PCIBCR2)); + + return 1; +} + +int __init sh7751_pcic_init(struct sh7751_pci_address_map *map) +{ + u32 reg; + u32 word; + + /* Set the BCR's to enable PCI access */ + reg = inl(SH7751_BCR1); + reg |= 0x80000; + outl(reg, SH7751_BCR1); + + /* Turn the clocks back on (not done in reset)*/ + outl(0, PCI_REG(SH7751_PCICLKR)); + /* Clear Powerdown IRQ's (not done in reset) */ + word = SH7751_PCIPINT_D3 | SH7751_PCIPINT_D0; + outl(word, PCI_REG(SH7751_PCIPINT)); + + /* + * This code is unused for some boards as it is done in the + * bootloader and doing it here means the MAC addresses loaded + * by the bootloader get lost. + */ + if (!(map->flags & SH7751_PCIC_NO_RESET)) { + /* toggle PCI reset pin */ + word = SH7751_PCICR_PREFIX | SH7751_PCICR_PRST; + outl(word,PCI_REG(SH7751_PCICR)); + /* Wait for a long time... not 1 sec. but long enough */ + mdelay(100); + word = SH7751_PCICR_PREFIX; + outl(word,PCI_REG(SH7751_PCICR)); + } + + /* set the command/status bits to: + * Wait Cycle Control + Parity Enable + Bus Master + + * Mem space enable + */ + word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER | + SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES; + outl(word, PCI_REG(SH7751_PCICONF1)); + + /* define this host as the host bridge */ + word = SH7751_PCI_HOST_BRIDGE << 24; + outl(word, PCI_REG(SH7751_PCICONF2)); + + /* Set IO and Mem windows to local address + * Make PCI and local address the same for easy 1 to 1 mapping + * Window0 = map->window0.size @ non-cached area base = SDRAM + * Window1 = map->window1.size @ cached area base = SDRAM + */ + word = map->window0.size - 1; + outl(word, PCI_REG(SH7751_PCILSR0)); + word = map->window1.size - 1; + outl(word, PCI_REG(SH7751_PCILSR1)); + /* Set the values on window 0 PCI config registers */ + word = P2SEGADDR(map->window0.base); + outl(word, PCI_REG(SH7751_PCILAR0)); + outl(word, PCI_REG(SH7751_PCICONF5)); + /* Set the values on window 1 PCI config registers */ + word = PHYSADDR(map->window1.base); + outl(word, PCI_REG(SH7751_PCILAR1)); + outl(word, PCI_REG(SH7751_PCICONF6)); + + /* Set the local 16MB PCI memory space window to + * the lowest PCI mapped address + */ + word = PCIBIOS_MIN_MEM & SH7751_PCIMBR_MASK; + PCIDBG(2,"PCI: Setting upper bits of Memory window to 0x%x\n", word); + outl(word , PCI_REG(SH7751_PCIMBR)); + + /* Map IO space into PCI IO window + * The IO window is 64K-PCIBIOS_MIN_IO in size + * IO addresses will be translated to the + * PCI IO window base address + */ + PCIDBG(3,"PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", PCIBIOS_MIN_IO, + (64*1024), SH7751_PCI_IO_BASE+PCIBIOS_MIN_IO); + + /* + * XXX: For now, leave this board-specific. In the event we have other + * boards that need to do similar work, this can be wrapped. + */ +#ifdef CONFIG_SH_BIGSUR + bigsur_port_map(PCIBIOS_MIN_IO, (64*1024), SH7751_PCI_IO_BASE+PCIBIOS_MIN_IO,0); +#endif + + /* Make sure the MSB's of IO window are set to access PCI space correctly */ + word = PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK; + PCIDBG(2,"PCI: Setting upper bits of IO window to 0x%x\n", word); + outl(word, PCI_REG(SH7751_PCIIOBR)); + + /* Set PCI WCRx, BCRx's, copy from BSC locations */ + + /* check BCR for SDRAM in specified area */ + switch (map->window0.base) { + case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(0); break; + case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(1); break; + case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(2); break; + case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(3); break; + case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(4); break; + case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(5); break; + case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(6); break; + } + + if (!word) + return 0; + + /* configure the wait control registers */ + word = inl(SH7751_WCR1); + outl(word, PCI_REG(SH7751_PCIWCR1)); + word = inl(SH7751_WCR2); + outl(word, PCI_REG(SH7751_PCIWCR2)); + word = inl(SH7751_WCR3); + outl(word, PCI_REG(SH7751_PCIWCR3)); + word = inl(SH7751_MCR); + outl(word, PCI_REG(SH7751_PCIMCR)); + + /* NOTE: I'm ignoring the PCI error IRQs for now.. + * TODO: add support for the internal error interrupts and + * DMA interrupts... + */ + +#ifdef CONFIG_SH_RTS7751R2D + pci_fixup_pcic(); +#endif + + /* SH7751 init done, set central function init complete */ + /* use round robin mode to stop a device starving/overruning */ + word = SH7751_PCICR_PREFIX | SH7751_PCICR_CFIN | SH7751_PCICR_ARBM; + outl(word,PCI_REG(SH7751_PCICR)); + + return 1; +} + +char * __init pcibios_setup(char *str) +{ + if (!strcmp(str, "off")) { + pci_probe = 0; + return NULL; + } + + return str; +} + +/* + * IRQ functions + */ +static u8 __init sh7751_no_swizzle(struct pci_dev *dev, u8 *pin) +{ + /* no swizzling */ + return PCI_SLOT(dev->devfn); +} + +static int sh7751_pci_lookup_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq = -1; + + /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */ + irq = pcibios_map_platform_irq(slot,pin); + if( irq < 0 ) { + pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev)); + return irq; + } + + pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq); + + return irq; +} + +void __init pcibios_fixup_irqs(void) +{ + pci_fixup_irqs(sh7751_no_swizzle, sh7751_pci_lookup_irq); +} + diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h new file mode 100644 index 00000000000..1fee5cae10d --- /dev/null +++ b/arch/sh/drivers/pci/pci-sh7751.h @@ -0,0 +1,303 @@ +/* + * Low-Level PCI Support for SH7751 targets + * + * Dustin McIntire (dustin@sensoria.com) (c) 2001 + * Paul Mundt (lethal@linux-sh.org) (c) 2003 + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + */ + +#ifndef _PCI_SH7751_H_ +#define _PCI_SH7751_H_ + +#include <linux/pci.h> + +/* set debug level 4=verbose...1=terse */ +//#define DEBUG_PCI 3 +#undef DEBUG_PCI + +#ifdef DEBUG_PCI +#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); } +#else +#define PCIDBG(n, x...) +#endif + +/* startup values */ +#define PCI_PROBE_BIOS 1 +#define PCI_PROBE_CONF1 2 +#define PCI_PROBE_CONF2 4 +#define PCI_NO_SORT 0x100 +#define PCI_BIOS_SORT 0x200 +#define PCI_NO_CHECKS 0x400 +#define PCI_ASSIGN_ROMS 0x1000 +#define PCI_BIOS_IRQ_SCAN 0x2000 + +/* Platform Specific Values */ +#define SH7751_VENDOR_ID 0x1054 +#define SH7751_DEVICE_ID 0x3505 +#define SH7751R_DEVICE_ID 0x350e + +/* SH7751 Specific Values */ +#define SH7751_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */ +#define SH7751_PCI_CONFIG_SIZE 0x1000000 /* Config space size */ +#define SH7751_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */ +#define SH7751_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ +#define SH7751_PCI_IO_BASE 0xFE240000 /* IO space base address */ +#define SH7751_PCI_IO_SIZE 0x40000 /* Size of IO window */ + +#define SH7751_PCIREG_BASE 0xFE200000 /* PCI regs base address */ +#define PCI_REG(n) (SH7751_PCIREG_BASE+ n) + +#define SH7751_PCICONF0 0x0 /* PCI Config Reg 0 */ + #define SH7751_PCICONF0_DEVID 0xFFFF0000 /* Device ID */ + #define SH7751_PCICONF0_VNDID 0x0000FFFF /* Vendor ID */ +#define SH7751_PCICONF1 0x4 /* PCI Config Reg 1 */ + #define SH7751_PCICONF1_DPE 0x80000000 /* Data Parity Error */ + #define SH7751_PCICONF1_SSE 0x40000000 /* System Error Status */ + #define SH7751_PCICONF1_RMA 0x20000000 /* Master Abort */ + #define SH7751_PCICONF1_RTA 0x10000000 /* Target Abort Rx Status */ + #define SH7751_PCICONF1_STA 0x08000000 /* Target Abort Exec Status */ + #define SH7751_PCICONF1_DEV 0x06000000 /* Timing Status */ + #define SH7751_PCICONF1_DPD 0x01000000 /* Data Parity Status */ + #define SH7751_PCICONF1_FBBC 0x00800000 /* Back 2 Back Status */ + #define SH7751_PCICONF1_UDF 0x00400000 /* User Defined Status */ + #define SH7751_PCICONF1_66M 0x00200000 /* 66Mhz Operation Status */ + #define SH7751_PCICONF1_PM 0x00100000 /* Power Management Status */ + #define SH7751_PCICONF1_PBBE 0x00000200 /* Back 2 Back Control */ + #define SH7751_PCICONF1_SER 0x00000100 /* SERR Output Control */ + #define SH7751_PCICONF1_WCC 0x00000080 /* Wait Cycle Control */ + #define SH7751_PCICONF1_PER 0x00000040 /* Parity Error Response */ + #define SH7751_PCICONF1_VPS 0x00000020 /* VGA Pallet Snoop */ + #define SH7751_PCICONF1_MWIE 0x00000010 /* Memory Write+Invalidate */ + #define SH7751_PCICONF1_SPC 0x00000008 /* Special Cycle Control */ + #define SH7751_PCICONF1_BUM 0x00000004 /* Bus Master Control */ + #define SH7751_PCICONF1_MES 0x00000002 /* Memory Space Control */ + #define SH7751_PCICONF1_IOS 0x00000001 /* I/O Space Control */ +#define SH7751_PCICONF2 0x8 /* PCI Config Reg 2 */ + #define SH7751_PCICONF2_BCC 0xFF000000 /* Base Class Code */ + #define SH7751_PCICONF2_SCC 0x00FF0000 /* Sub-Class Code */ + #define SH7751_PCICONF2_RLPI 0x0000FF00 /* Programming Interface */ + #define SH7751_PCICONF2_REV 0x000000FF /* Revision ID */ +#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */ + #define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */ + #define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */ + #define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */ + #define SH7751_PCICONF3_HD7 0x00800000 /* Single Funtion device */ + #define SH7751_PCICONF3_HD6_0 0x007F0000 /* Configuration Layout */ + #define SH7751_PCICONF3_LAT 0x0000FF00 /* Latency Timer */ + #define SH7751_PCICONF3_CLS 0x000000FF /* Cache Line Size */ +#define SH7751_PCICONF4 0x10 /* PCI Config Reg 4 */ + #define SH7751_PCICONF4_BASE 0xFFFFFFFC /* I/O Space Base Addr */ + #define SH7751_PCICONF4_ASI 0x00000001 /* Address Space Type */ +#define SH7751_PCICONF5 0x14 /* PCI Config Reg 5 */ + #define SH7751_PCICONF5_BASE 0xFFFFFFF0 /* Mem Space Base Addr */ + #define SH7751_PCICONF5_LAP 0x00000008 /* Prefetch Enabled */ + #define SH7751_PCICONF5_LAT 0x00000006 /* Local Memory type */ + #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */ +#define SH7751_PCICONF6 0x18 /* PCI Config Reg 6 */ + #define SH7751_PCICONF6_BASE 0xFFFFFFF0 /* Mem Space Base Addr */ + #define SH7751_PCICONF6_LAP 0x00000008 /* Prefetch Enabled */ + #define SH7751_PCICONF6_LAT 0x00000006 /* Local Memory type */ + #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */ +/* PCICONF7 - PCICONF10 are undefined */ +#define SH7751_PCICONF11 0x2C /* PCI Config Reg 11 */ + #define SH7751_PCICONF11_SSID 0xFFFF0000 /* Subsystem ID */ + #define SH7751_PCICONF11_SVID 0x0000FFFF /* Subsystem Vendor ID */ +/* PCICONF12 is undefined */ +#define SH7751_PCICONF13 0x34 /* PCI Config Reg 13 */ + #define SH7751_PCICONF13_CPTR 0x000000FF /* PM function pointer */ +/* PCICONF14 is undefined */ +#define SH7751_PCICONF15 0x3C /* PCI Config Reg 15 */ + #define SH7751_PCICONF15_IPIN 0x000000FF /* Interrupt Pin */ +#define SH7751_PCICONF16 0x40 /* PCI Config Reg 16 */ + #define SH7751_PCICONF16_PMES 0xF8000000 /* PME Support */ + #define SH7751_PCICONF16_D2S 0x04000000 /* D2 Support */ + #define SH7751_PCICONF16_D1S 0x02000000 /* D1 Support */ + #define SH7751_PCICONF16_DSI 0x00200000 /* Bit Device Init. */ + #define SH7751_PCICONF16_PMCK 0x00080000 /* Clock for PME req. */ + #define SH7751_PCICONF16_VER 0x00070000 /* PM Version */ + #define SH7751_PCICONF16_NIP 0x0000FF00 /* Next Item Pointer */ + #define SH7751_PCICONF16_CID 0x000000FF /* Capability Identifier */ +#define SH7751_PCICONF17 0x44 /* PCI Config Reg 17 */ + #define SH7751_PCICONF17_DATA 0xFF000000 /* Data field for PM */ + #define SH7751_PCICONF17_PMES 0x00800000 /* PME Status */ + #define SH7751_PCICONF17_DSCL 0x00600000 /* Data Scaling Value */ + #define SH7751_PCICONF17_DSEL 0x001E0000 /* Data Select */ + #define SH7751_PCICONF17_PMEN 0x00010000 /* PME Enable */ + #define SH7751_PCICONF17_PWST 0x00000003 /* Power State */ +/* SH7715 Internal PCI Registers */ +#define SH7751_PCICR 0x100 /* PCI Control Register */ + #define SH7751_PCICR_PREFIX 0xA5000000 /* CR prefix for write */ + #define SH7751_PCICR_TRSB 0x00000200 /* Target Read Single */ + #define SH7751_PCICR_BSWP 0x00000100 /* Target Byte Swap */ + #define SH7751_PCICR_PLUP 0x00000080 /* Enable PCI Pullup */ + #define SH7751_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */ + #define SH7751_PCICR_MD 0x00000030 /* MD9 and MD10 status */ + #define SH7751_PCICR_SERR 0x00000008 /* SERR output assert */ + #define SH7751_PCICR_INTA 0x00000004 /* INTA output assert */ + #define SH7751_PCICR_PRST 0x00000002 /* PCI Reset Assert */ + #define SH7751_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */ +#define SH7751_PCILSR0 0x104 /* PCI Local Space Register0 */ +#define SH7751_PCILSR1 0x108 /* PCI Local Space Register1 */ +#define SH7751_PCILAR0 0x10C /* PCI Local Address Register1 */ +#define SH7751_PCILAR1 0x110 /* PCI Local Address Register1 */ +#define SH7751_PCIINT 0x114 /* PCI Interrupt Register */ + #define SH7751_PCIINT_MLCK 0x00008000 /* Master Lock Error */ + #define SH7751_PCIINT_TABT 0x00004000 /* Target Abort Error */ + #define SH7751_PCIINT_TRET 0x00000200 /* Target Retry Error */ + #define SH7751_PCIINT_MFDE 0x00000100 /* Master Func. Disable Error */ + #define SH7751_PCIINT_PRTY 0x00000080 /* Address Parity Error */ + #define SH7751_PCIINT_SERR 0x00000040 /* SERR Detection Error */ + #define SH7751_PCIINT_TWDP 0x00000020 /* Tgt. Write Parity Error */ + #define SH7751_PCIINT_TRDP 0x00000010 /* Tgt. Read Parity Error Det. */ + #define SH7751_PCIINT_MTABT 0x00000008 /* Master-Tgt. Abort Error */ + #define SH7751_PCIINT_MMABT 0x00000004 /* Master-Master Abort Error */ + #define SH7751_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */ + #define SH7751_PCIINT_MRPD 0x00000002 /* Master Read PERR Detect */ +#define SH7751_PCIINTM 0x118 /* PCI Interrupt Mask Register */ +#define SH7751_PCIALR 0x11C /* Error Address Register */ +#define SH7751_PCICLR 0x120 /* Error Command/Data Register */ + #define SH7751_PCICLR_MPIO 0x80000000 /* Error Command/Data Register */ + #define SH7751_PCICLR_MDMA0 0x40000000 /* DMA0 Transfer Error */ + #define SH7751_PCICLR_MDMA1 0x20000000 /* DMA1 Transfer Error */ + #define SH7751_PCICLR_MDMA2 0x10000000 /* DMA2 Transfer Error */ + #define SH7751_PCICLR_MDMA3 0x08000000 /* DMA3 Transfer Error */ + #define SH7751_PCICLR_TGT 0x04000000 /* Target Transfer Error */ + #define SH7751_PCICLR_CMDL 0x0000000F /* PCI Command at Error */ +#define SH7751_PCIAINT 0x130 /* Arbiter Interrupt Register */ + #define SH7751_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */ + #define SH7751_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */ + #define SH7751_PCIAINT_MBTO 0x00001000 /* Master Bus Time Out */ + #define SH7751_PCIAINT_TABT 0x00000008 /* Target Abort */ + #define SH7751_PCIAINT_MABT 0x00000004 /* Master Abort */ + #define SH7751_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */ + #define SH7751_PCIAINT_WDPE 0x00000002 /* Write Data Parity Error */ +#define SH7751_PCIAINTM 0x134 /* Arbiter Int. Mask Register */ +#define SH7751_PCIBMLR 0x138 /* Error Bus Master Register */ + #define SH7751_PCIBMLR_REQ4 0x00000010 /* REQ4 bus master at error */ + #define SH7751_PCIBMLR_REQ3 0x00000008 /* REQ3 bus master at error */ + #define SH7751_PCIBMLR_REQ2 0x00000004 /* REQ2 bus master at error */ + #define SH7751_PCIBMLR_REQ1 0x00000002 /* REQ1 bus master at error */ + #define SH7751_PCIBMLR_REQ0 0x00000001 /* REQ0 bus master at error */ +#define SH7751_PCIDMABT 0x140 /* DMA Transfer Arb. Register */ + #define SH7751_PCIDMABT_RRBN 0x00000001 /* DMA Arbitor Round-Robin */ +#define SH7751_PCIDPA0 0x180 /* DMA0 Transfer Addr. Register */ +#define SH7751_PCIDLA0 0x184 /* DMA0 Local Addr. Register */ +#define SH7751_PCIDTC0 0x188 /* DMA0 Transfer Cnt. Register */ +#define SH7751_PCIDCR0 0x18C /* DMA0 Control Register */ + #define SH7751_PCIDCR_ALGN 0x00000600 /* DMA Alignment Mode */ + #define SH7751_PCIDCR_MAST 0x00000100 /* DMA Termination Type */ + #define SH7751_PCIDCR_INTM 0x00000080 /* DMA Interrupt Done Mask*/ + #define SH7751_PCIDCR_INTS 0x00000040 /* DMA Interrupt Done Status */ + #define SH7751_PCIDCR_LHLD 0x00000020 /* Local Address Control */ + #define SH7751_PCIDCR_PHLD 0x00000010 /* PCI Address Control*/ + #define SH7751_PCIDCR_IOSEL 0x00000008 /* PCI Address Space Type */ + #define SH7751_PCIDCR_DIR 0x00000004 /* DMA Transfer Direction */ + #define SH7751_PCIDCR_STOP 0x00000002 /* Force DMA Stop */ + #define SH7751_PCIDCR_STRT 0x00000001 /* DMA Start */ +#define SH7751_PCIDPA1 0x190 /* DMA1 Transfer Addr. Register */ +#define SH7751_PCIDLA1 0x194 /* DMA1 Local Addr. Register */ +#define SH7751_PCIDTC1 0x198 /* DMA1 Transfer Cnt. Register */ +#define SH7751_PCIDCR1 0x19C /* DMA1 Control Register */ +#define SH7751_PCIDPA2 0x1A0 /* DMA2 Transfer Addr. Register */ +#define SH7751_PCIDLA2 0x1A4 /* DMA2 Local Addr. Register */ +#define SH7751_PCIDTC2 0x1A8 /* DMA2 Transfer Cnt. Register */ +#define SH7751_PCIDCR2 0x1AC /* DMA2 Control Register */ +#define SH7751_PCIDPA3 0x1B0 /* DMA3 Transfer Addr. Register */ +#define SH7751_PCIDLA3 0x1B4 /* DMA3 Local Addr. Register */ +#define SH7751_PCIDTC3 0x1B8 /* DMA3 Transfer Cnt. Register */ +#define SH7751_PCIDCR3 0x1BC /* DMA3 Control Register */ +#define SH7751_PCIPAR 0x1C0 /* PIO Address Register */ + #define SH7751_PCIPAR_CFGEN 0x80000000 /* Configuration Enable */ + #define SH7751_PCIPAR_BUSNO 0x00FF0000 /* Config. Bus Number */ + #define SH7751_PCIPAR_DEVNO 0x0000FF00 /* Config. Device Number */ + #define SH7751_PCIPAR_REGAD 0x000000FC /* Register Address Number */ +#define SH7751_PCIMBR 0x1C4 /* Memory Base Address Register */ + #define SH7751_PCIMBR_MASK 0xFF000000 /* Memory Space Mask */ + #define SH7751_PCIMBR_LOCK 0x00000001 /* Lock Memory Space */ +#define SH7751_PCIIOBR 0x1C8 /* I/O Base Address Register */ + #define SH7751_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */ + #define SH7751_PCIIOBR_LOCK 0x00000001 /* Lock IO Space */ +#define SH7751_PCIPINT 0x1CC /* Power Mgmnt Int. Register */ + #define SH7751_PCIPINT_D3 0x00000002 /* D3 Pwr Mgmt. Interrupt */ + #define SH7751_PCIPINT_D0 0x00000001 /* D0 Pwr Mgmt. Interrupt */ +#define SH7751_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */ +#define SH7751_PCICLKR 0x1D4 /* Clock Ctrl. Register */ + #define SH7751_PCICLKR_PCSTP 0x00000002 /* PCI Clock Stop */ + #define SH7751_PCICLKR_BCSTP 0x00000002 /* BCLK Clock Stop */ +/* For definitions of BCR, MCR see ... */ +#define SH7751_PCIBCR1 0x1E0 /* Memory BCR1 Register */ +#define SH7751_PCIBCR2 0x1E4 /* Memory BCR2 Register */ +#define SH7751_PCIWCR1 0x1E8 /* Wait Control 1 Register */ +#define SH7751_PCIWCR2 0x1EC /* Wait Control 2 Register */ +#define SH7751_PCIWCR3 0x1F0 /* Wait Control 3 Register */ +#define SH7751_PCIMCR 0x1F4 /* Memory Control Register */ +#define SH7751_PCIBCR3 0x1f8 /* Memory BCR3 Register */ +#define SH7751_PCIPCTR 0x200 /* Port Control Register */ + #define SH7751_PCIPCTR_P2EN 0x000400000 /* Port 2 Enable */ + #define SH7751_PCIPCTR_P1EN 0x000200000 /* Port 1 Enable */ + #define SH7751_PCIPCTR_P0EN 0x000100000 /* Port 0 Enable */ + #define SH7751_PCIPCTR_P2UP 0x000000020 /* Port2 Pull Up Enable */ + #define SH7751_PCIPCTR_P2IO 0x000000010 /* Port2 Output Enable */ + #define SH7751_PCIPCTR_P1UP 0x000000008 /* Port1 Pull Up Enable */ + #define SH7751_PCIPCTR_P1IO 0x000000004 /* Port1 Output Enable */ + #define SH7751_PCIPCTR_P0UP 0x000000002 /* Port0 Pull Up Enable */ + #define SH7751_PCIPCTR_P0IO 0x000000001 /* Port0 Output Enable */ +#define SH7751_PCIPDTR 0x204 /* Port Data Register */ + #define SH7751_PCIPDTR_PB5 0x000000020 /* Port 5 Enable */ + #define SH7751_PCIPDTR_PB4 0x000000010 /* Port 4 Enable */ + #define SH7751_PCIPDTR_PB3 0x000000008 /* Port 3 Enable */ + #define SH7751_PCIPDTR_PB2 0x000000004 /* Port 2 Enable */ + #define SH7751_PCIPDTR_PB1 0x000000002 /* Port 1 Enable */ + #define SH7751_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */ +#define SH7751_PCIPDR 0x220 /* Port IO Data Register */ + +/* Memory Control Registers */ +#define SH7751_BCR1 0xFF800000 /* Memory BCR1 Register */ +#define SH7751_BCR2 0xFF800004 /* Memory BCR2 Register */ +#define SH7751_BCR3 0xFF800050 /* Memory BCR3 Register */ +#define SH7751_BCR4 0xFE0A00F0 /* Memory BCR4 Register */ +#define SH7751_WCR1 0xFF800008 /* Wait Control 1 Register */ +#define SH7751_WCR2 0xFF80000C /* Wait Control 2 Register */ +#define SH7751_WCR3 0xFF800010 /* Wait Control 3 Register */ +#define SH7751_MCR 0xFF800014 /* Memory Control Register */ + +/* General Memory Config Addresses */ +#define SH7751_CS0_BASE_ADDR 0x0 +#define SH7751_MEM_REGION_SIZE 0x04000000 +#define SH7751_CS1_BASE_ADDR (SH7751_CS0_BASE_ADDR + SH7751_MEM_REGION_SIZE) +#define SH7751_CS2_BASE_ADDR (SH7751_CS1_BASE_ADDR + SH7751_MEM_REGION_SIZE) +#define SH7751_CS3_BASE_ADDR (SH7751_CS2_BASE_ADDR + SH7751_MEM_REGION_SIZE) +#define SH7751_CS4_BASE_ADDR (SH7751_CS3_BASE_ADDR + SH7751_MEM_REGION_SIZE) +#define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE) +#define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE) + +/* General PCI values */ +#define SH7751_PCI_HOST_BRIDGE 0x6 + +/* Flags */ +#define SH7751_PCIC_NO_RESET 0x0001 + +/* External functions defined per platform i.e. Big Sur, SE... (these could be routed + * through the machine vectors... */ +extern int pcibios_init_platform(void); +extern int pcibios_map_platform_irq(u8 slot, u8 pin); + +struct sh7751_pci_address_space { + unsigned long base; + unsigned long size; +}; + +struct sh7751_pci_address_map { + struct sh7751_pci_address_space window0; + struct sh7751_pci_address_space window1; + unsigned long flags; +}; + +/* arch/sh/drivers/pci/pci-sh7751.c */ +extern int sh7751_pcic_init(struct sh7751_pci_address_map *map); + +#endif /* _PCI_SH7751_H_ */ + diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c new file mode 100644 index 00000000000..cb675213115 --- /dev/null +++ b/arch/sh/drivers/pci/pci-st40.c @@ -0,0 +1,509 @@ +/* + * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Support functions for the ST40 PCI hardware. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/types.h> +#include <asm/pci.h> +#include <linux/irq.h> +#include <linux/interrupt.h> /* irqreturn_t */ + +#include "pci-st40.h" + +/* This is in P2 of course */ +#define ST40PCI_BASE_ADDRESS (0xb0000000) +#define ST40PCI_MEM_ADDRESS (ST40PCI_BASE_ADDRESS+0x0) +#define ST40PCI_IO_ADDRESS (ST40PCI_BASE_ADDRESS+0x06000000) +#define ST40PCI_REG_ADDRESS (ST40PCI_BASE_ADDRESS+0x07000000) + +#define ST40PCI_REG(x) (ST40PCI_REG_ADDRESS+(ST40PCI_##x)) +#define ST40PCI_REG_INDEXED(reg, index) \ + (ST40PCI_REG(reg##0) + \ + ((ST40PCI_REG(reg##1) - ST40PCI_REG(reg##0))*index)) + +#define ST40PCI_WRITE(reg,val) writel((val),ST40PCI_REG(reg)) +#define ST40PCI_WRITE_SHORT(reg,val) writew((val),ST40PCI_REG(reg)) +#define ST40PCI_WRITE_BYTE(reg,val) writeb((val),ST40PCI_REG(reg)) +#define ST40PCI_WRITE_INDEXED(reg, index, val) \ + writel((val), ST40PCI_REG_INDEXED(reg, index)); + +#define ST40PCI_READ(reg) readl(ST40PCI_REG(reg)) +#define ST40PCI_READ_SHORT(reg) readw(ST40PCI_REG(reg)) +#define ST40PCI_READ_BYTE(reg) readb(ST40PCI_REG(reg)) + +#define ST40PCI_SERR_IRQ 64 +#define ST40PCI_ERR_IRQ 65 + + +/* Macros to extract PLL params */ +#define PLL_MDIV(reg) ( ((unsigned)reg) & 0xff ) +#define PLL_NDIV(reg) ( (((unsigned)reg)>>8) & 0xff ) +#define PLL_PDIV(reg) ( (((unsigned)reg)>>16) & 0x3 ) +#define PLL_SETUP(reg) ( (((unsigned)reg)>>19) & 0x1ff ) + +/* Build up the appropriate settings */ +#define PLL_SET(mdiv,ndiv,pdiv,setup) \ +( ((mdiv)&0xff) | (((ndiv)&0xff)<<8) | (((pdiv)&3)<<16)| (((setup)&0x1ff)<<19)) + +#define PLLPCICR (0xbb040000+0x10) + +#define PLLPCICR_POWERON (1<<28) +#define PLLPCICR_OUT_EN (1<<29) +#define PLLPCICR_LOCKSELECT (1<<30) +#define PLLPCICR_LOCK (1<<31) + + +#define PLL_25MHZ 0x793c8512 +#define PLL_33MHZ PLL_SET(18,88,3,295) + +static void pci_set_rbar_region(unsigned int region, unsigned long localAddr, + unsigned long pciOffset, unsigned long regionSize); + +/* + * The pcibios_map_platform_irq function is defined in the appropriate + * board specific code and referenced here + */ +extern int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin); + +static __init void SetPCIPLL(void) +{ + { + /* Lets play with the PLL values */ + unsigned long pll1cr1; + unsigned long mdiv, ndiv, pdiv; + unsigned long muxcr; + unsigned int muxcr_ratios[4] = { 8, 16, 21, 1 }; + unsigned int freq; + +#define CLKGENA 0xbb040000 +#define CLKGENA_PLL2_MUXCR CLKGENA + 0x48 + pll1cr1 = ctrl_inl(PLLPCICR); + printk("PLL1CR1 %08lx\n", pll1cr1); + mdiv = PLL_MDIV(pll1cr1); + ndiv = PLL_NDIV(pll1cr1); + pdiv = PLL_PDIV(pll1cr1); + printk("mdiv %02lx ndiv %02lx pdiv %02lx\n", mdiv, ndiv, pdiv); + freq = ((2*27*ndiv)/mdiv) / (1 << pdiv); + printk("PLL freq %dMHz\n", freq); + muxcr = ctrl_inl(CLKGENA_PLL2_MUXCR); + printk("PCI freq %dMhz\n", freq / muxcr_ratios[muxcr & 3]); + } +} + + +struct pci_err { + unsigned mask; + const char *error_string; +}; + +static struct pci_err int_error[]={ + { INT_MNLTDIM,"MNLTDIM: Master non-lock transfer"}, + { INT_TTADI, "TTADI: Illegal byte enable in I/O transfer"}, + { INT_TMTO, "TMTO: Target memory read/write timeout"}, + { INT_MDEI, "MDEI: Master function disable error"}, + { INT_APEDI, "APEDI: Address parity error"}, + { INT_SDI, "SDI: SERR detected"}, + { INT_DPEITW, "DPEITW: Data parity error target write"}, + { INT_PEDITR, "PEDITR: PERR detected"}, + { INT_TADIM, "TADIM: Target abort detected"}, + { INT_MADIM, "MADIM: Master abort detected"}, + { INT_MWPDI, "MWPDI: PERR from target at data write"}, + { INT_MRDPEI, "MRDPEI: Master read data parity error"} +}; +#define NUM_PCI_INT_ERRS (sizeof(int_error)/sizeof(struct pci_err)) + +static struct pci_err aint_error[]={ + { AINT_MBI, "MBI: Master broken"}, + { AINT_TBTOI, "TBTOI: Target bus timeout"}, + { AINT_MBTOI, "MBTOI: Master bus timeout"}, + { AINT_TAI, "TAI: Target abort"}, + { AINT_MAI, "MAI: Master abort"}, + { AINT_RDPEI, "RDPEI: Read data parity"}, + { AINT_WDPE, "WDPE: Write data parity"} +}; + +#define NUM_PCI_AINT_ERRS (sizeof(aint_error)/sizeof(struct pci_err)) + +static void print_pci_errors(unsigned reg,struct pci_err *error,int num_errors) +{ + int i; + + for(i=0;i<num_errors;i++) { + if(reg & error[i].mask) { + printk("%s\n",error[i].error_string); + } + } + +} + + +static char * pci_commands[16]={ + "Int Ack", + "Special Cycle", + "I/O Read", + "I/O Write", + "Reserved", + "Reserved", + "Memory Read", + "Memory Write", + "Reserved", + "Reserved", + "Configuration Read", + "Configuration Write", + "Memory Read Multiple", + "Dual Address Cycle", + "Memory Read Line", + "Memory Write-and-Invalidate" +}; + +static irqreturn_t st40_pci_irq(int irq, void *dev_instance, struct pt_regs *regs) +{ + unsigned pci_int, pci_air, pci_cir, pci_aint; + static int count=0; + + + pci_int = ST40PCI_READ(INT);pci_aint = ST40PCI_READ(AINT); + pci_cir = ST40PCI_READ(CIR);pci_air = ST40PCI_READ(AIR); + + /* Reset state to stop multiple interrupts */ + ST40PCI_WRITE(INT, ~0); ST40PCI_WRITE(AINT, ~0); + + + if(++count>1) return IRQ_HANDLED; + + printk("** PCI ERROR **\n"); + + if(pci_int) { + printk("** INT register status\n"); + print_pci_errors(pci_int,int_error,NUM_PCI_INT_ERRS); + } + + if(pci_aint) { + printk("** AINT register status\n"); + print_pci_errors(pci_aint,aint_error,NUM_PCI_AINT_ERRS); + } + + printk("** Address and command info\n"); + + printk("** Command %s : Address 0x%x\n", + pci_commands[pci_cir&0xf],pci_air); + + if(pci_cir&CIR_PIOTEM) { + printk("CIR_PIOTEM:PIO transfer error for master\n"); + } + if(pci_cir&CIR_RWTET) { + printk("CIR_RWTET:Read/Write transfer error for target\n"); + } + + return IRQ_HANDLED; +} + + +/* Rounds a number UP to the nearest power of two. Used for + * sizing the PCI window. + */ +static u32 r2p2(u32 num) +{ + int i = 31; + u32 tmp = num; + + if (num == 0) + return 0; + + do { + if (tmp & (1 << 31)) + break; + i--; + tmp <<= 1; + } while (i >= 0); + + tmp = 1 << i; + /* If the original number isn't a power of 2, round it up */ + if (tmp != num) + tmp <<= 1; + + return tmp; +} + +static void __init pci_fixup_ide_bases(struct pci_dev *d) +{ + int i; + + /* + * PCI IDE controllers use non-standard I/O port decoding, respect it. + */ + if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + printk("PCI: IDE base address fixup for %s\n", pci_name(d)); + for(i=0; i<4; i++) { + struct resource *r = &d->resource[i]; + if ((r->start & ~0x80) == 0x374) { + r->start |= 2; + r->end = r->start; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); + +int __init st40pci_init(unsigned memStart, unsigned memSize) +{ + u32 lsr0; + + SetPCIPLL(); + + /* Initialises the ST40 pci subsystem, performing a reset, then programming + * up the address space decoders appropriately + */ + + /* Should reset core here as well methink */ + + ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_SOFT_RESET); + + /* Loop while core resets */ + while (ST40PCI_READ(CR) & CR_SOFT_RESET); + + /* Switch off interrupts */ + ST40PCI_WRITE(INTM, 0); + ST40PCI_WRITE(AINT, 0); + + /* Now, lets reset all the cards on the bus with extreme prejudice */ + ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_RSTCTL); + udelay(250); + + /* Set bus active, take it out of reset */ + ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_BMAM | CR_CFINT | CR_PFCS | CR_PFE); + + /* The PCI spec says that no access must be made to the bus until 1 second + * after reset. This seem ludicrously long, but some delay is needed here + */ + mdelay(1000); + + /* Switch off interrupts */ + ST40PCI_WRITE(INTM, 0); + ST40PCI_WRITE(AINT, 0); + + /* Allow it to be a master */ + + ST40PCI_WRITE_SHORT(CSR_CMD, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_IO); + + /* Accesse to the 0xb0000000 -> 0xb6000000 area will go through to 0x10000000 -> 0x16000000 + * on the PCI bus. This allows a nice 1-1 bus to phys mapping. + */ + + + ST40PCI_WRITE(MBR, 0x10000000); + /* Always set the max size 128M (actually, it is only 96MB wide) */ + ST40PCI_WRITE(MBMR, 0x07ff0000); + + /* I/O addresses are mapped at 0xb6000000 -> 0xb7000000. These are changed to 0, to + * allow cards that have legacy io such as vga to function correctly. This gives a + * maximum of 64K of io/space as only the bottom 16 bits of the address are copied + * over to the bus when the transaction is made. 64K of io space is more than enough + */ + ST40PCI_WRITE(IOBR, 0x0); + /* Set up the 64K window */ + ST40PCI_WRITE(IOBMR, 0x0); + + /* Now we set up the mbars so the PCI bus can see the local memory */ + /* Expose a 256M window starting at PCI address 0... */ + ST40PCI_WRITE(CSR_MBAR0, 0); + ST40PCI_WRITE(LSR0, 0x0fff0001); + + /* ... and set up the initial incomming window to expose all of RAM */ + pci_set_rbar_region(7, memStart, memStart, memSize); + + /* Maximise timeout values */ + ST40PCI_WRITE_BYTE(CSR_TRDY, 0xff); + ST40PCI_WRITE_BYTE(CSR_RETRY, 0xff); + ST40PCI_WRITE_BYTE(CSR_MIT, 0xff); + + ST40PCI_WRITE_BYTE(PERF,PERF_MASTER_WRITE_POSTING); + + return 1; +} + +char * __init pcibios_setup(char *str) +{ + return str; +} + + +#define SET_CONFIG_BITS(bus,devfn,where)\ + (((bus) << 16) | ((devfn) << 8) | ((where) & ~3) | (bus!=0)) + +#define CONFIG_CMD(bus, devfn, where) SET_CONFIG_BITS(bus->number,devfn,where) + + +static int CheckForMasterAbort(void) +{ + if (ST40PCI_READ(INT) & INT_MADIM) { + /* Should we clear config space version as well ??? */ + ST40PCI_WRITE(INT, INT_MADIM); + ST40PCI_WRITE_SHORT(CSR_STATUS, 0); + return 1; + } + + return 0; +} + +/* Write to config register */ +static int st40pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) +{ + ST40PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); + switch (size) { + case 1: + *val = (u8)ST40PCI_READ_BYTE(PDR + (where & 3)); + break; + case 2: + *val = (u16)ST40PCI_READ_SHORT(PDR + (where & 2)); + break; + case 4: + *val = ST40PCI_READ(PDR); + break; + } + + if (CheckForMasterAbort()){ + switch (size) { + case 1: + *val = (u8)0xff; + break; + case 2: + *val = (u16)0xffff; + break; + case 4: + *val = 0xffffffff; + break; + } + } + + return PCIBIOS_SUCCESSFUL; +} + +static int st40pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) +{ + ST40PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); + + switch (size) { + case 1: + ST40PCI_WRITE_BYTE(PDR + (where & 3), (u8)val); + break; + case 2: + ST40PCI_WRITE_SHORT(PDR + (where & 2), (u16)val); + break; + case 4: + ST40PCI_WRITE(PDR, val); + break; + } + + CheckForMasterAbort(); + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops st40pci_config_ops = { + .read = st40pci_read, + .write = st40pci_write, +}; + + +/* Everything hangs off this */ +static struct pci_bus *pci_root_bus; + + +static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin) +{ + return PCI_SLOT(dev->devfn); +} + + +static int __init pcibios_init(void) +{ + extern unsigned long memory_start, memory_end; + + printk(KERN_ALERT "pci-st40.c: pcibios_init\n"); + + if (sh_mv.mv_init_pci != NULL) { + sh_mv.mv_init_pci(); + } + + /* The pci subsytem needs to know where memory is and how much + * of it there is. I've simply made these globals. A better mechanism + * is probably needed. + */ + st40pci_init(PHYSADDR(memory_start), + PHYSADDR(memory_end) - PHYSADDR(memory_start)); + + if (request_irq(ST40PCI_ERR_IRQ, st40_pci_irq, + SA_INTERRUPT, "st40pci", NULL)) { + printk(KERN_ERR "st40pci: Cannot hook interrupt\n"); + return -EIO; + } + + /* Enable the PCI interrupts on the device */ + ST40PCI_WRITE(INTM, ~0); + ST40PCI_WRITE(AINT, ~0); + + /* Map the io address apprioately */ +#ifdef CONFIG_HD64465 + hd64465_port_map(PCIBIOS_MIN_IO, (64 * 1024) - PCIBIOS_MIN_IO + 1, + ST40_IO_ADDR + PCIBIOS_MIN_IO, 0); +#endif + + /* ok, do the scan man */ + pci_root_bus = pci_scan_bus(0, &st40pci_config_ops, NULL); + pci_assign_unassigned_resources(); + pci_fixup_irqs(no_swizzle, pcibios_map_platform_irq); + + return 0; +} + +subsys_initcall(pcibios_init); + +void __init pcibios_fixup_bus(struct pci_bus *bus) +{ +} + +/* + * Publish a region of local address space over the PCI bus + * to other devices. + */ +static void pci_set_rbar_region(unsigned int region, unsigned long localAddr, + unsigned long pciOffset, unsigned long regionSize) +{ + unsigned long mask; + + if (region > 7) + return; + + if (regionSize > (512 * 1024 * 1024)) + return; + + mask = r2p2(regionSize) - 0x10000; + + /* Diable the region (in case currently in use, should never happen) */ + ST40PCI_WRITE_INDEXED(RSR, region, 0); + + /* Start of local address space to publish */ + ST40PCI_WRITE_INDEXED(RLAR, region, PHYSADDR(localAddr) ); + + /* Start of region in PCI address space as an offset from MBAR0 */ + ST40PCI_WRITE_INDEXED(RBAR, region, pciOffset); + + /* Size of region */ + ST40PCI_WRITE_INDEXED(RSR, region, mask | 1); +} + diff --git a/arch/sh/drivers/pci/pci-st40.h b/arch/sh/drivers/pci/pci-st40.h new file mode 100644 index 00000000000..d729e0c2d5f --- /dev/null +++ b/arch/sh/drivers/pci/pci-st40.h @@ -0,0 +1,136 @@ +/* + * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Defintions for the ST40 PCI hardware. + */ + +#ifndef __PCI_ST40_H__ +#define __PCI_ST40_H__ + +#define ST40PCI_VCR_STATUS 0x00 + +#define ST40PCI_VCR_VERSION 0x08 + +#define ST40PCI_CR 0x10 + +#define CR_SOFT_RESET (1<<12) +#define CR_PFCS (1<<11) +#define CR_PFE (1<<9) +#define CR_BMAM (1<<6) +#define CR_HOST (1<<5) +#define CR_CLKEN (1<<4) +#define CR_SOCS (1<<3) +#define CR_IOCS (1<<2) +#define CR_RSTCTL (1<<1) +#define CR_CFINT (1<<0) +#define CR_LOCK_MASK 0x5a000000 + + +#define ST40PCI_LSR0 0X14 +#define ST40PCI_LAR0 0x1c + +#define ST40PCI_INT 0x24 +#define INT_MNLTDIM (1<<15) +#define INT_TTADI (1<<14) +#define INT_TMTO (1<<9) +#define INT_MDEI (1<<8) +#define INT_APEDI (1<<7) +#define INT_SDI (1<<6) +#define INT_DPEITW (1<<5) +#define INT_PEDITR (1<<4) +#define INT_TADIM (1<<3) +#define INT_MADIM (1<<2) +#define INT_MWPDI (1<<1) +#define INT_MRDPEI (1<<0) + + +#define ST40PCI_INTM 0x28 +#define ST40PCI_AIR 0x2c + +#define ST40PCI_CIR 0x30 +#define CIR_PIOTEM (1<<31) +#define CIR_RWTET (1<<26) + +#define ST40PCI_AINT 0x40 +#define AINT_MBI (1<<13) +#define AINT_TBTOI (1<<12) +#define AINT_MBTOI (1<<11) +#define AINT_TAI (1<<3) +#define AINT_MAI (1<<2) +#define AINT_RDPEI (1<<1) +#define AINT_WDPE (1<<0) + +#define ST40PCI_AINTM 0x44 +#define ST40PCI_BMIR 0x48 +#define ST40PCI_PAR 0x4c +#define ST40PCI_MBR 0x50 +#define ST40PCI_IOBR 0x54 +#define ST40PCI_PINT 0x58 +#define ST40PCI_PINTM 0x5c +#define ST40PCI_MBMR 0x70 +#define ST40PCI_IOBMR 0x74 +#define ST40PCI_PDR 0x78 + +/* H8 specific registers start here */ +#define ST40PCI_WCBAR 0x7c +#define ST40PCI_LOCCFG_UNLOCK 0x34 + +#define ST40PCI_RBAR0 0x100 +#define ST40PCI_RSR0 0x104 +#define ST40PCI_RLAR0 0x108 + +#define ST40PCI_RBAR1 0x110 +#define ST40PCI_RSR1 0x114 +#define ST40PCI_RLAR1 0x118 + + +#define ST40PCI_RBAR2 0x120 +#define ST40PCI_RSR2 0x124 +#define ST40PCI_RLAR2 0x128 + +#define ST40PCI_RBAR3 0x130 +#define ST40PCI_RSR3 0x134 +#define ST40PCI_RLAR3 0x138 + +#define ST40PCI_RBAR4 0x140 +#define ST40PCI_RSR4 0x144 +#define ST40PCI_RLAR4 0x148 + +#define ST40PCI_RBAR5 0x150 +#define ST40PCI_RSR5 0x154 +#define ST40PCI_RLAR5 0x158 + +#define ST40PCI_RBAR6 0x160 +#define ST40PCI_RSR6 0x164 +#define ST40PCI_RLAR6 0x168 + +#define ST40PCI_RBAR7 0x170 +#define ST40PCI_RSR7 0x174 +#define ST40PCI_RLAR7 0x178 + + +#define ST40PCI_RBAR(n) (0x100+(0x10*(n))) +#define ST40PCI_RSR(n) (0x104+(0x10*(n))) +#define ST40PCI_RLAR(n) (0x108+(0x10*(n))) + +#define ST40PCI_PERF 0x80 +#define PERF_MASTER_WRITE_POSTING (1<<4) +/* H8 specific registers end here */ + + +/* These are configs space registers */ +#define ST40PCI_CSR_VID 0x10000 +#define ST40PCI_CSR_DID 0x10002 +#define ST40PCI_CSR_CMD 0x10004 +#define ST40PCI_CSR_STATUS 0x10006 +#define ST40PCI_CSR_MBAR0 0x10010 +#define ST40PCI_CSR_TRDY 0x10040 +#define ST40PCI_CSR_RETRY 0x10041 +#define ST40PCI_CSR_MIT 0x1000d + +#define ST40_IO_ADDR 0xb6000000 + +#endif /* __PCI_ST40_H__ */ diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c new file mode 100644 index 00000000000..c1669905abe --- /dev/null +++ b/arch/sh/drivers/pci/pci.c @@ -0,0 +1,155 @@ +/* arch/sh/kernel/pci.c + * $Id: pci.c,v 1.1 2003/08/24 19:15:45 lethal Exp $ + * + * Copyright (c) 2002 M. R. Brown <mrbrown@linux-sh.org> + * + * + * These functions are collected here to reduce duplication of common + * code amongst the many platform-specific PCI support code files. + * + * These routines require the following board-specific routines: + * void pcibios_fixup_irqs(); + * + * See include/asm-sh/pci.h for more information. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> + +static int __init pcibios_init(void) +{ + struct pci_channel *p; + struct pci_bus *bus; + int busno; + +#ifdef CONFIG_PCI_AUTO + /* assign resources */ + busno = 0; + for (p = board_pci_channels; p->pci_ops != NULL; p++) { + busno = pciauto_assign_resources(busno, p) + 1; + } +#endif + + /* scan the buses */ + busno = 0; + for (p= board_pci_channels; p->pci_ops != NULL; p++) { + bus = pci_scan_bus(busno, p->pci_ops, p); + busno = bus->subordinate+1; + } + + /* board-specific fixups */ + pcibios_fixup_irqs(); + + return 0; +} + +subsys_initcall(pcibios_init); + +void +pcibios_update_resource(struct pci_dev *dev, struct resource *root, + struct resource *res, int resource) +{ + u32 new, check; + int reg; + + new = res->start | (res->flags & PCI_REGION_FLAG_MASK); + if (resource < 6) { + reg = PCI_BASE_ADDRESS_0 + 4*resource; + } else if (resource == PCI_ROM_RESOURCE) { + res->flags |= IORESOURCE_ROM_ENABLE; + new |= PCI_ROM_ADDRESS_ENABLE; + reg = dev->rom_base_reg; + } else { + /* Somebody might have asked allocation of a non-standard resource */ + return; + } + + pci_write_config_dword(dev, reg, new); + pci_read_config_dword(dev, reg, &check); + if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) { + printk(KERN_ERR "PCI: Error while updating region " + "%s/%d (%08x != %08x)\n", pci_name(dev), resource, + new, check); + } +} + +void pcibios_align_resource(void *data, struct resource *res, + unsigned long size, unsigned long align) + __attribute__ ((weak)); + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + */ +void pcibios_align_resource(void *data, struct resource *res, + unsigned long size, unsigned long align) +{ + if (res->flags & IORESOURCE_IO) { + unsigned long start = res->start; + + if (start & 0x300) { + start = (start + 0x3ff) & ~0x3ff; + res->start = start; + } + } +} + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for(idx=0; idx<6; idx++) { + if (!(mask & (1 << idx))) + continue; + r = &dev->resource[idx]; + if (!r->start && r->end) { + printk(KERN_ERR "PCI: Device %s not available because " + "of resource collisions\n", pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (dev->resource[PCI_ROM_RESOURCE].start) + cmd |= PCI_COMMAND_MEMORY; + if (cmd != old_cmd) { + printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +/* + * If we set up a device for bus mastering, we need to check and set + * the latency timer as it may not be properly set. + */ +unsigned int pcibios_max_latency = 255; + +void pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + else + return; + printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} + +void __init pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile new file mode 100644 index 00000000000..8b819698df1 --- /dev/null +++ b/arch/sh/kernel/Makefile @@ -0,0 +1,22 @@ +# +# Makefile for the Linux/SuperH kernel. +# + +extra-y := head.o init_task.o vmlinux.lds + +obj-y := process.o signal.o entry.o traps.o irq.o \ + ptrace.o setup.o time.o sys_sh.o semaphore.o \ + io.o io_generic.o sh_ksyms.o + +obj-y += cpu/ + +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_CF_ENABLER) += cf-enabler.o +obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o +obj-$(CONFIG_SH_KGDB) += kgdb_stub.o kgdb_jmp.o +obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o +obj-$(CONFIG_MODULES) += module.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +USE_STANDARD_AS_RULE := true + diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c new file mode 100644 index 00000000000..dc6725c51a8 --- /dev/null +++ b/arch/sh/kernel/asm-offsets.c @@ -0,0 +1,32 @@ +/* + * This program is used to generate definitions needed by + * assembly language modules. + * + * We use the technique used in the OSF Mach kernel code: + * generate asm statements containing #defines, + * compile this file to assembler, and then extract the + * #defines from the assembly-language output. + */ + +#include <linux/stddef.h> +#include <linux/types.h> +#include <linux/mm.h> +#include <asm/thread_info.h> + +#define DEFINE(sym, val) \ + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + +#define BLANK() asm volatile("\n->" : : ) + +int main(void) +{ + /* offsets into the thread_info struct */ + DEFINE(TI_TASK, offsetof(struct thread_info, task)); + DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain)); + DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); + DEFINE(TI_CPU, offsetof(struct thread_info, cpu)); + DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count)); + DEFINE(TI_RESTART_BLOCK,offsetof(struct thread_info, restart_block)); + + return 0; +} diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c new file mode 100644 index 00000000000..7a3b18faa27 --- /dev/null +++ b/arch/sh/kernel/cf-enabler.c @@ -0,0 +1,158 @@ +/* $Id: cf-enabler.c,v 1.4 2004/02/22 22:44:36 kkojima Exp $ + * + * linux/drivers/block/cf-enabler.c + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2000 Toshiharu Nozawa + * Copyright (C) 2001 A&D Co., Ltd. + * + * Enable the CF configuration. + */ + +#include <linux/config.h> +#include <linux/init.h> + +#include <asm/io.h> +#include <asm/irq.h> + +/* + * You can connect Compact Flash directly to the bus of SuperH. + * This is the enabler for that. + * + * SIM: How generic is this really? It looks pretty board, or at + * least SH sub-type, specific to me. + * I know it doesn't work on the Overdrive! + */ + +/* + * 0xB8000000 : Attribute + * 0xB8001000 : Common Memory + * 0xBA000000 : I/O + */ +#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4) +/* SH4 can't access PCMCIA interface through P2 area. + * we must remap it with appropreate attribute bit of the page set. + * this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */ +#include <linux/mm.h> +#include <linux/vmalloc.h> + +#if defined(CONFIG_CF_AREA6) +#define slot_no 0 +#else +#define slot_no 1 +#endif + +/* defined in mm/ioremap.c */ +extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags); + +/* use this pointer to access to directly connected compact flash io area*/ +void *cf_io_base; + +static int __init allocate_cf_area(void) +{ + pgprot_t prot; + unsigned long paddrbase, psize; + + /* open I/O area window */ + paddrbase = virt_to_phys((void*)CONFIG_CF_BASE_ADDR); + psize = PAGE_SIZE; + prot = PAGE_KERNEL_PCC(slot_no, _PAGE_PCC_IO16); + cf_io_base = p3_ioremap(paddrbase, psize, prot.pgprot); + if (!cf_io_base) { + printk("allocate_cf_area : can't open CF I/O window!\n"); + return -ENOMEM; + } +/* printk("p3_ioremap(paddr=0x%08lx, psize=0x%08lx, prot=0x%08lx)=0x%08lx\n", + paddrbase, psize, prot.pgprot, cf_io_base);*/ + + /* XXX : do we need attribute and common-memory area also? */ + + return 0; +} +#endif + +static int __init cf_init_default(void) +{ +/* You must have enabled the card, and set the level interrupt + * before reaching this point. Possibly in boot ROM or boot loader. + */ +#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4) + allocate_cf_area(); +#endif +#if defined(CONFIG_SH_UNKNOWN) + /* This should be done in each board's init_xxx_irq. */ + make_imask_irq(14); + disable_irq(14); +#endif + return 0; +} + +#if defined(CONFIG_SH_SOLUTION_ENGINE) +#include <asm/se/se.h> + +/* + * SolutionEngine + * + * 0xB8400000 : Common Memory + * 0xB8500000 : Attribute + * 0xB8600000 : I/O + */ + +static int __init cf_init_se(void) +{ + if ((ctrl_inw(MRSHPC_CSR) & 0x000c) != 0) + return 0; /* Not detected */ + + if ((ctrl_inw(MRSHPC_CSR) & 0x0080) == 0) { + ctrl_outw(0x0674, MRSHPC_CPWCR); /* Card Vcc is 3.3v? */ + } else { + ctrl_outw(0x0678, MRSHPC_CPWCR); /* Card Vcc is 5V */ + } + + /* + * PC-Card window open + * flag == COMMON/ATTRIBUTE/IO + */ + /* common window open */ + ctrl_outw(0x8a84, MRSHPC_MW0CR1);/* window 0xb8400000 */ + if((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0) + /* common mode & bus width 16bit SWAP = 1*/ + ctrl_outw(0x0b00, MRSHPC_MW0CR2); + else + /* common mode & bus width 16bit SWAP = 0*/ + ctrl_outw(0x0300, MRSHPC_MW0CR2); + + /* attribute window open */ + ctrl_outw(0x8a85, MRSHPC_MW1CR1);/* window 0xb8500000 */ + if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0) + /* attribute mode & bus width 16bit SWAP = 1*/ + ctrl_outw(0x0a00, MRSHPC_MW1CR2); + else + /* attribute mode & bus width 16bit SWAP = 0*/ + ctrl_outw(0x0200, MRSHPC_MW1CR2); + + /* I/O window open */ + ctrl_outw(0x8a86, MRSHPC_IOWCR1);/* I/O window 0xb8600000 */ + ctrl_outw(0x0008, MRSHPC_CDCR); /* I/O card mode */ + if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0) + ctrl_outw(0x0a00, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1*/ + else + ctrl_outw(0x0200, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 0*/ + + ctrl_outw(0x2000, MRSHPC_ICR); + ctrl_outb(0x00, PA_MRSHPC_MW2 + 0x206); + ctrl_outb(0x42, PA_MRSHPC_MW2 + 0x200); + return 0; +} +#endif + +int __init cf_init(void) +{ +#if defined(CONFIG_SH_SOLUTION_ENGINE) + if (MACH_SE) + return cf_init_se(); +#endif + return cf_init_default(); +} + +__initcall (cf_init); diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile new file mode 100644 index 00000000000..cd43714df61 --- /dev/null +++ b/arch/sh/kernel/cpu/Makefile @@ -0,0 +1,16 @@ +# +# Makefile for the Linux/SuperH CPU-specifc backends. +# + +obj-y := irq_ipr.o irq_imask.o init.o bus.o + +obj-$(CONFIG_CPU_SH2) += sh2/ +obj-$(CONFIG_CPU_SH3) += sh3/ +obj-$(CONFIG_CPU_SH4) += sh4/ + +obj-$(CONFIG_SH_RTC) += rtc.o +obj-$(CONFIG_UBC_WAKEUP) += ubc.o +obj-$(CONFIG_SH_ADC) += adc.o + +USE_STANDARD_AS_RULE := true + diff --git a/arch/sh/kernel/cpu/adc.c b/arch/sh/kernel/cpu/adc.c new file mode 100644 index 00000000000..da3d6877f93 --- /dev/null +++ b/arch/sh/kernel/cpu/adc.c @@ -0,0 +1,36 @@ +/* + * linux/arch/sh/kernel/adc.c -- SH3 on-chip ADC support + * + * Copyright (C) 2004 Andriy Skulysh <askulysh@image.kiev.ua> + */ + +#include <linux/module.h> +#include <asm/adc.h> +#include <asm/io.h> + + +int adc_single(unsigned int channel) +{ + int off; + unsigned char csr; + + if (channel >= 8) return -1; + + off = (channel & 0x03) << 2; + + csr = ctrl_inb(ADCSR); + csr = channel | ADCSR_ADST | ADCSR_CKS; + ctrl_outb(csr, ADCSR); + + do { + csr = ctrl_inb(ADCSR); + } while ((csr & ADCSR_ADF) == 0); + + csr &= ~(ADCSR_ADF | ADCSR_ADST); + ctrl_outb(csr, ADCSR); + + return (((ctrl_inb(ADDRAH + off) << 8) | + ctrl_inb(ADDRAL + off)) >> 6); +} + +EXPORT_SYMBOL(adc_single); diff --git a/arch/sh/kernel/cpu/bus.c b/arch/sh/kernel/cpu/bus.c new file mode 100644 index 00000000000..ace82f4b4a5 --- /dev/null +++ b/arch/sh/kernel/cpu/bus.c @@ -0,0 +1,195 @@ +/* + * arch/sh/kernel/cpu/bus.c + * + * Virtual bus for SuperH. + * + * Copyright (C) 2004 Paul Mundt + * + * Shamelessly cloned from arch/arm/mach-omap/bus.c, which was written + * by: + * + * Copyright (C) 2003 - 2004 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * Portions of code based on sa1111.c. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/module.h> +#include <asm/bus-sh.h> + +static int sh_bus_match(struct device *dev, struct device_driver *drv) +{ + struct sh_driver *shdrv = to_sh_driver(drv); + struct sh_dev *shdev = to_sh_dev(dev); + + return shdev->dev_id == shdrv->dev_id; +} + +static int sh_bus_suspend(struct device *dev, u32 state) +{ + struct sh_dev *shdev = to_sh_dev(dev); + struct sh_driver *shdrv = to_sh_driver(dev->driver); + + if (shdrv && shdrv->suspend) + return shdrv->suspend(shdev, state); + + return 0; +} + +static int sh_bus_resume(struct device *dev) +{ + struct sh_dev *shdev = to_sh_dev(dev); + struct sh_driver *shdrv = to_sh_driver(dev->driver); + + if (shdrv && shdrv->resume) + return shdrv->resume(shdev); + + return 0; +} + +static struct device sh_bus_devices[SH_NR_BUSES] = { + { + .bus_id = SH_BUS_NAME_VIRT, + }, +}; + +struct bus_type sh_bus_types[SH_NR_BUSES] = { + { + .name = SH_BUS_NAME_VIRT, + .match = sh_bus_match, + .suspend = sh_bus_suspend, + .resume = sh_bus_resume, + }, +}; + +static int sh_device_probe(struct device *dev) +{ + struct sh_dev *shdev = to_sh_dev(dev); + struct sh_driver *shdrv = to_sh_driver(dev->driver); + + if (shdrv && shdrv->probe) + return shdrv->probe(shdev); + + return -ENODEV; +} + +static int sh_device_remove(struct device *dev) +{ + struct sh_dev *shdev = to_sh_dev(dev); + struct sh_driver *shdrv = to_sh_driver(dev->driver); + + if (shdrv && shdrv->remove) + return shdrv->remove(shdev); + + return 0; +} + +int sh_device_register(struct sh_dev *dev) +{ + if (!dev) + return -EINVAL; + + if (dev->bus_id < 0 || dev->bus_id >= SH_NR_BUSES) { + printk(KERN_ERR "%s: bus_id invalid: %s bus: %d\n", + __FUNCTION__, dev->name, dev->bus_id); + return -EINVAL; + } + + dev->dev.parent = &sh_bus_devices[dev->bus_id]; + dev->dev.bus = &sh_bus_types[dev->bus_id]; + + /* This is needed for USB OHCI to work */ + if (dev->dma_mask) + dev->dev.dma_mask = dev->dma_mask; + + snprintf(dev->dev.bus_id, BUS_ID_SIZE, "%s%u", + dev->name, dev->dev_id); + + printk(KERN_INFO "Registering SH device '%s'. Parent at %s\n", + dev->dev.bus_id, dev->dev.parent->bus_id); + + return device_register(&dev->dev); +} + +void sh_device_unregister(struct sh_dev *dev) +{ + device_unregister(&dev->dev); +} + +int sh_driver_register(struct sh_driver *drv) +{ + if (!drv) + return -EINVAL; + + if (drv->bus_id < 0 || drv->bus_id >= SH_NR_BUSES) { + printk(KERN_ERR "%s: bus_id invalid: bus: %d device %d\n", + __FUNCTION__, drv->bus_id, drv->dev_id); + return -EINVAL; + } + + drv->drv.probe = sh_device_probe; + drv->drv.remove = sh_device_remove; + drv->drv.bus = &sh_bus_types[drv->bus_id]; + + return driver_register(&drv->drv); +} + +void sh_driver_unregister(struct sh_driver *drv) +{ + driver_unregister(&drv->drv); +} + +static int __init sh_bus_init(void) +{ + int i, ret = 0; + + for (i = 0; i < SH_NR_BUSES; i++) { + ret = device_register(&sh_bus_devices[i]); + if (ret != 0) { + printk(KERN_ERR "Unable to register bus device %s\n", + sh_bus_devices[i].bus_id); + continue; + } + + ret = bus_register(&sh_bus_types[i]); + if (ret != 0) { + printk(KERN_ERR "Unable to register bus %s\n", + sh_bus_types[i].name); + device_unregister(&sh_bus_devices[i]); + } + } + + printk(KERN_INFO "SH Virtual Bus initialized\n"); + + return ret; +} + +static void __exit sh_bus_exit(void) +{ + int i; + + for (i = 0; i < SH_NR_BUSES; i++) { + bus_unregister(&sh_bus_types[i]); + device_unregister(&sh_bus_devices[i]); + } +} + +module_init(sh_bus_init); +module_exit(sh_bus_exit); + +MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); +MODULE_DESCRIPTION("SH Virtual Bus"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(sh_bus_types); +EXPORT_SYMBOL(sh_device_register); +EXPORT_SYMBOL(sh_device_unregister); +EXPORT_SYMBOL(sh_driver_register); +EXPORT_SYMBOL(sh_driver_unregister); + diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c new file mode 100644 index 00000000000..cf94e8ef17c --- /dev/null +++ b/arch/sh/kernel/cpu/init.c @@ -0,0 +1,222 @@ +/* + * arch/sh/kernel/cpu/init.c + * + * CPU init code + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/processor.h> +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/cacheflush.h> +#include <asm/cache.h> +#include <asm/io.h> + +extern void detect_cpu_and_cache_system(void); + +/* + * Generic wrapper for command line arguments to disable on-chip + * peripherals (nofpu, nodsp, and so forth). + */ +#define onchip_setup(x) \ +static int x##_disabled __initdata = 0; \ + \ +static int __init x##_setup(char *opts) \ +{ \ + x##_disabled = 1; \ + return 0; \ +} \ +__setup("no" __stringify(x), x##_setup); + +onchip_setup(fpu); +onchip_setup(dsp); + +/* + * Generic first-level cache init + */ +static void __init cache_init(void) +{ + unsigned long ccr, flags; + + if (cpu_data->type == CPU_SH_NONE) + panic("Unknown CPU"); + + jump_to_P2(); + ccr = ctrl_inl(CCR); + + /* + * If the cache is already enabled .. flush it. + */ + if (ccr & CCR_CACHE_ENABLE) { + unsigned long ways, waysize, addrstart; + + waysize = cpu_data->dcache.sets; + + /* + * If the OC is already in RAM mode, we only have + * half of the entries to flush.. + */ + if (ccr & CCR_CACHE_ORA) + waysize >>= 1; + + waysize <<= cpu_data->dcache.entry_shift; + +#ifdef CCR_CACHE_EMODE + /* If EMODE is not set, we only have 1 way to flush. */ + if (!(ccr & CCR_CACHE_EMODE)) + ways = 1; + else +#endif + ways = cpu_data->dcache.ways; + + addrstart = CACHE_OC_ADDRESS_ARRAY; + do { + unsigned long addr; + + for (addr = addrstart; + addr < addrstart + waysize; + addr += cpu_data->dcache.linesz) + ctrl_outl(0, addr); + + addrstart += cpu_data->dcache.way_incr; + } while (--ways); + } + + /* + * Default CCR values .. enable the caches + * and invalidate them immediately.. + */ + flags = CCR_CACHE_ENABLE | CCR_CACHE_INVALIDATE; + +#ifdef CCR_CACHE_EMODE + /* Force EMODE if possible */ + if (cpu_data->dcache.ways > 1) + flags |= CCR_CACHE_EMODE; +#endif + +#ifdef CONFIG_SH_WRITETHROUGH + /* Turn on Write-through caching */ + flags |= CCR_CACHE_WT; +#else + /* .. or default to Write-back */ + flags |= CCR_CACHE_CB; +#endif + +#ifdef CONFIG_SH_OCRAM + /* Turn on OCRAM -- halve the OC */ + flags |= CCR_CACHE_ORA; + cpu_data->dcache.sets >>= 1; +#endif + + ctrl_outl(flags, CCR); + back_to_P1(); +} + +#ifdef CONFIG_SH_DSP +static void __init release_dsp(void) +{ + unsigned long sr; + + /* Clear SR.DSP bit */ + __asm__ __volatile__ ( + "stc\tsr, %0\n\t" + "and\t%1, %0\n\t" + "ldc\t%0, sr\n\t" + : "=&r" (sr) + : "r" (~SR_DSP) + ); +} + +static void __init dsp_init(void) +{ + unsigned long sr; + + /* + * Set the SR.DSP bit, wait for one instruction, and then read + * back the SR value. + */ + __asm__ __volatile__ ( + "stc\tsr, %0\n\t" + "or\t%1, %0\n\t" + "ldc\t%0, sr\n\t" + "nop\n\t" + "stc\tsr, %0\n\t" + : "=&r" (sr) + : "r" (SR_DSP) + ); + + /* If the DSP bit is still set, this CPU has a DSP */ + if (sr & SR_DSP) + cpu_data->flags |= CPU_HAS_DSP; + + /* Now that we've determined the DSP status, clear the DSP bit. */ + release_dsp(); +} +#endif /* CONFIG_SH_DSP */ + +/** + * sh_cpu_init + * + * This is our initial entry point for each CPU, and is invoked on the boot + * CPU prior to calling start_kernel(). For SMP, a combination of this and + * start_secondary() will bring up each processor to a ready state prior + * to hand forking the idle loop. + * + * We do all of the basic processor init here, including setting up the + * caches, FPU, DSP, kicking the UBC, etc. By the time start_kernel() is + * hit (and subsequently platform_setup()) things like determining the + * CPU subtype and initial configuration will all be done. + * + * Each processor family is still responsible for doing its own probing + * and cache configuration in detect_cpu_and_cache_system(). + */ +asmlinkage void __init sh_cpu_init(void) +{ + /* First, probe the CPU */ + detect_cpu_and_cache_system(); + + /* Init the cache */ + cache_init(); + + /* Disable the FPU */ + if (fpu_disabled) { + printk("FPU Disabled\n"); + cpu_data->flags &= ~CPU_HAS_FPU; + disable_fpu(); + } + + /* FPU initialization */ + if ((cpu_data->flags & CPU_HAS_FPU)) { + clear_thread_flag(TIF_USEDFPU); + clear_used_math(); + } + +#ifdef CONFIG_SH_DSP + /* Probe for DSP */ + dsp_init(); + + /* Disable the DSP */ + if (dsp_disabled) { + printk("DSP Disabled\n"); + cpu_data->flags &= ~CPU_HAS_DSP; + release_dsp(); + } +#endif + +#ifdef CONFIG_UBC_WAKEUP + /* + * Some brain-damaged loaders decided it would be a good idea to put + * the UBC to sleep. This causes some issues when it comes to things + * like PTRACE_SINGLESTEP or doing hardware watchpoints in GDB. So .. + * we wake it up and hope that all is well. + */ + ubc_wakeup(); +#endif +} + diff --git a/arch/sh/kernel/cpu/irq_imask.c b/arch/sh/kernel/cpu/irq_imask.c new file mode 100644 index 00000000000..f76901e732f --- /dev/null +++ b/arch/sh/kernel/cpu/irq_imask.c @@ -0,0 +1,116 @@ +/* $Id: irq_imask.c,v 1.1.2.1 2002/11/17 10:53:43 mrbrown Exp $ + * + * linux/arch/sh/kernel/irq_imask.c + * + * Copyright (C) 1999, 2000 Niibe Yutaka + * + * Simple interrupt handling using IMASK of SR register. + * + */ + +/* NOTE: Will not work on level 15 */ + + +#include <linux/ptrace.h> +#include <linux/errno.h> +#include <linux/kernel_stat.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/bitops.h> + +#include <asm/system.h> +#include <asm/irq.h> + +#include <linux/spinlock.h> +#include <linux/cache.h> +#include <linux/irq.h> + +/* Bitmap of IRQ masked */ +static unsigned long imask_mask = 0x7fff; +static int interrupt_priority = 0; + +static void enable_imask_irq(unsigned int irq); +static void disable_imask_irq(unsigned int irq); +static void shutdown_imask_irq(unsigned int irq); +static void mask_and_ack_imask(unsigned int); +static void end_imask_irq(unsigned int irq); + +#define IMASK_PRIORITY 15 + +static unsigned int startup_imask_irq(unsigned int irq) +{ + /* Nothing to do */ + return 0; /* never anything pending */ +} + +static struct hw_interrupt_type imask_irq_type = { + "SR.IMASK", + startup_imask_irq, + shutdown_imask_irq, + enable_imask_irq, + disable_imask_irq, + mask_and_ack_imask, + end_imask_irq +}; + +void static inline set_interrupt_registers(int ip) +{ + unsigned long __dummy; + + asm volatile("ldc %2, r6_bank\n\t" + "stc sr, %0\n\t" + "and #0xf0, %0\n\t" + "shlr2 %0\n\t" + "cmp/eq #0x3c, %0\n\t" + "bt/s 1f ! CLI-ed\n\t" + " stc sr, %0\n\t" + "and %1, %0\n\t" + "or %2, %0\n\t" + "ldc %0, sr\n" + "1:" + : "=&z" (__dummy) + : "r" (~0xf0), "r" (ip << 4) + : "t"); +} + +static void disable_imask_irq(unsigned int irq) +{ + clear_bit(irq, &imask_mask); + if (interrupt_priority < IMASK_PRIORITY - irq) + interrupt_priority = IMASK_PRIORITY - irq; + + set_interrupt_registers(interrupt_priority); +} + +static void enable_imask_irq(unsigned int irq) +{ + set_bit(irq, &imask_mask); + interrupt_priority = IMASK_PRIORITY - ffz(imask_mask); + + set_interrupt_registers(interrupt_priority); +} + +static void mask_and_ack_imask(unsigned int irq) +{ + disable_imask_irq(irq); +} + +static void end_imask_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_imask_irq(irq); +} + +static void shutdown_imask_irq(unsigned int irq) +{ + /* Nothing to do */ +} + +void make_imask_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &imask_irq_type; + enable_irq(irq); +} diff --git a/arch/sh/kernel/cpu/irq_ipr.c b/arch/sh/kernel/cpu/irq_ipr.c new file mode 100644 index 00000000000..7ea3d2d030e --- /dev/null +++ b/arch/sh/kernel/cpu/irq_ipr.c @@ -0,0 +1,339 @@ +/* $Id: irq_ipr.c,v 1.1.2.1 2002/11/17 10:53:43 mrbrown Exp $ + * + * linux/arch/sh/kernel/irq_ipr.c + * + * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi + * Copyright (C) 2000 Kazumoto Kojima + * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> + * + * Interrupt handling for IPR-based IRQ. + * + * Supported system: + * On-chip supporting modules (TMU, RTC, etc.). + * On-chip supporting modules for SH7709/SH7709A/SH7729/SH7300. + * Hitachi SolutionEngine external I/O: + * MS7709SE01, MS7709ASE01, and MS7750SE01 + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/module.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/machvec.h> + +struct ipr_data { + unsigned int addr; /* Address of Interrupt Priority Register */ + int shift; /* Shifts of the 16-bit data */ + int priority; /* The priority */ +}; +static struct ipr_data ipr_data[NR_IRQS]; + +static void enable_ipr_irq(unsigned int irq); +static void disable_ipr_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_ipr_irq disable_ipr_irq + +static void mask_and_ack_ipr(unsigned int); +static void end_ipr_irq(unsigned int irq); + +static unsigned int startup_ipr_irq(unsigned int irq) +{ + enable_ipr_irq(irq); + return 0; /* never anything pending */ +} + +static struct hw_interrupt_type ipr_irq_type = { + "IPR-IRQ", + startup_ipr_irq, + shutdown_ipr_irq, + enable_ipr_irq, + disable_ipr_irq, + mask_and_ack_ipr, + end_ipr_irq +}; + +static void disable_ipr_irq(unsigned int irq) +{ + unsigned long val, flags; + unsigned int addr = ipr_data[irq].addr; + unsigned short mask = 0xffff ^ (0x0f << ipr_data[irq].shift); + + /* Set the priority in IPR to 0 */ + local_irq_save(flags); + val = ctrl_inw(addr); + val &= mask; + ctrl_outw(val, addr); + local_irq_restore(flags); +} + +static void enable_ipr_irq(unsigned int irq) +{ + unsigned long val, flags; + unsigned int addr = ipr_data[irq].addr; + int priority = ipr_data[irq].priority; + unsigned short value = (priority << ipr_data[irq].shift); + + /* Set priority in IPR back to original value */ + local_irq_save(flags); + val = ctrl_inw(addr); + val |= value; + ctrl_outw(val, addr); + local_irq_restore(flags); +} + +static void mask_and_ack_ipr(unsigned int irq) +{ + disable_ipr_irq(irq); + +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) + /* This is needed when we use edge triggered setting */ + /* XXX: Is it really needed? */ + if (IRQ0_IRQ <= irq && irq <= IRQ5_IRQ) { + /* Clear external interrupt request */ + int a = ctrl_inb(INTC_IRR0); + a &= ~(1 << (irq - IRQ0_IRQ)); + ctrl_outb(a, INTC_IRR0); + } +#endif +} + +static void end_ipr_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_ipr_irq(irq); +} + +void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, int priority) +{ + disable_irq_nosync(irq); + ipr_data[irq].addr = addr; + ipr_data[irq].shift = pos*4; /* POSition (0-3) x 4 means shift */ + ipr_data[irq].priority = priority; + + irq_desc[irq].handler = &ipr_irq_type; + disable_ipr_irq(irq); +} + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) +static unsigned char pint_map[256]; +static unsigned long portcr_mask = 0; + +static void enable_pint_irq(unsigned int irq); +static void disable_pint_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_pint_irq disable_pint_irq + +static void mask_and_ack_pint(unsigned int); +static void end_pint_irq(unsigned int irq); + +static unsigned int startup_pint_irq(unsigned int irq) +{ + enable_pint_irq(irq); + return 0; /* never anything pending */ +} + +static struct hw_interrupt_type pint_irq_type = { + "PINT-IRQ", + startup_pint_irq, + shutdown_pint_irq, + enable_pint_irq, + disable_pint_irq, + mask_and_ack_pint, + end_pint_irq +}; + +static void disable_pint_irq(unsigned int irq) +{ + unsigned long val, flags; + + local_irq_save(flags); + val = ctrl_inw(INTC_INTER); + val &= ~(1 << (irq - PINT_IRQ_BASE)); + ctrl_outw(val, INTC_INTER); /* disable PINTn */ + portcr_mask &= ~(3 << (irq - PINT_IRQ_BASE)*2); + local_irq_restore(flags); +} + +static void enable_pint_irq(unsigned int irq) +{ + unsigned long val, flags; + + local_irq_save(flags); + val = ctrl_inw(INTC_INTER); + val |= 1 << (irq - PINT_IRQ_BASE); + ctrl_outw(val, INTC_INTER); /* enable PINTn */ + portcr_mask |= 3 << (irq - PINT_IRQ_BASE)*2; + local_irq_restore(flags); +} + +static void mask_and_ack_pint(unsigned int irq) +{ + disable_pint_irq(irq); +} + +static void end_pint_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_pint_irq(irq); +} + +void make_pint_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &pint_irq_type; + disable_pint_irq(irq); +} +#endif + +void __init init_IRQ(void) +{ +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + int i; +#endif + + make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY); + make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY); +#if defined(CONFIG_SH_RTC) + make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY); +#endif + +#ifdef SCI_ERI_IRQ + make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); + make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); + make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); +#endif + +#ifdef SCIF1_ERI_IRQ + make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); + make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); + make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); + make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7300) + make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY); + make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); +#endif + +#ifdef SCIF_ERI_IRQ + make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); + make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); + make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); + make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); +#endif + +#ifdef IRDA_ERI_IRQ + make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); + make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); + make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); + make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) + /* + * Initialize the Interrupt Controller (INTC) + * registers to their power on values + */ + + /* + * Enable external irq (INTC IRQ mode). + * You should set corresponding bits of PFC to "00" + * to enable these interrupts. + */ + make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY); + make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY); + make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY); + make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY); + make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY); + make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY); +#if !defined(CONFIG_CPU_SUBTYPE_SH7300) + make_ipr_irq(PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY); + make_ipr_irq(PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY); + enable_ipr_irq(PINT0_IRQ); + enable_ipr_irq(PINT8_IRQ); + + for(i = 0; i < 16; i++) + make_pint_irq(PINT_IRQ_BASE + i); + for(i = 0; i < 256; i++) + { + if(i & 1) pint_map[i] = 0; + else if(i & 2) pint_map[i] = 1; + else if(i & 4) pint_map[i] = 2; + else if(i & 8) pint_map[i] = 3; + else if(i & 0x10) pint_map[i] = 4; + else if(i & 0x20) pint_map[i] = 5; + else if(i & 0x40) pint_map[i] = 6; + else if(i & 0x80) pint_map[i] = 7; + } +#endif /* !CONFIG_CPU_SUBTYPE_SH7300 */ +#endif /* CONFIG_CPU_SUBTYPE_SH7707 || CONFIG_CPU_SUBTYPE_SH7709 || CONFIG_CPU_SUBTYPE_SH7300*/ + +#ifdef CONFIG_CPU_SUBTYPE_ST40 + init_IRQ_intc2(); +#endif + + /* Perform the machine specific initialisation */ + if (sh_mv.mv_init_irq != NULL) { + sh_mv.mv_init_irq(); + } +} +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) +int ipr_irq_demux(int irq) +{ +#if !defined(CONFIG_CPU_SUBTYPE_SH7300) + unsigned long creg, dreg, d, sav; + + if(irq == PINT0_IRQ) + { +#if defined(CONFIG_CPU_SUBTYPE_SH7707) + creg = PORT_PACR; + dreg = PORT_PADR; +#else + creg = PORT_PCCR; + dreg = PORT_PCDR; +#endif + sav = ctrl_inw(creg); + ctrl_outw(sav | portcr_mask, creg); + d = (~ctrl_inb(dreg) ^ ctrl_inw(INTC_ICR2)) & ctrl_inw(INTC_INTER) & 0xff; + ctrl_outw(sav, creg); + if(d == 0) return irq; + return PINT_IRQ_BASE + pint_map[d]; + } + else if(irq == PINT8_IRQ) + { +#if defined(CONFIG_CPU_SUBTYPE_SH7707) + creg = PORT_PBCR; + dreg = PORT_PBDR; +#else + creg = PORT_PFCR; + dreg = PORT_PFDR; +#endif + sav = ctrl_inw(creg); + ctrl_outw(sav | (portcr_mask >> 16), creg); + d = (~ctrl_inb(dreg) ^ (ctrl_inw(INTC_ICR2) >> 8)) & (ctrl_inw(INTC_INTER) >> 8) & 0xff; + ctrl_outw(sav, creg); + if(d == 0) return irq; + return PINT_IRQ_BASE + 8 + pint_map[d]; + } +#endif + return irq; +} +#endif + +EXPORT_SYMBOL(make_ipr_irq); + diff --git a/arch/sh/kernel/cpu/rtc.c b/arch/sh/kernel/cpu/rtc.c new file mode 100644 index 00000000000..f8361f5e788 --- /dev/null +++ b/arch/sh/kernel/cpu/rtc.c @@ -0,0 +1,136 @@ +/* + * linux/arch/sh/kernel/rtc.c -- SH3 / SH4 on-chip RTC support + * + * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> + * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/time.h> + +#include <asm/io.h> +#include <asm/rtc.h> + +#ifndef BCD_TO_BIN +#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10) +#endif + +#ifndef BIN_TO_BCD +#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10) +#endif + +void sh_rtc_gettimeofday(struct timespec *ts) +{ + unsigned int sec128, sec, sec2, min, hr, wk, day, mon, yr, yr100, cf_bit; + unsigned long flags; + + again: + do { + local_irq_save(flags); + ctrl_outb(0, RCR1); /* Clear CF-bit */ + sec128 = ctrl_inb(R64CNT); + sec = ctrl_inb(RSECCNT); + min = ctrl_inb(RMINCNT); + hr = ctrl_inb(RHRCNT); + wk = ctrl_inb(RWKCNT); + day = ctrl_inb(RDAYCNT); + mon = ctrl_inb(RMONCNT); +#if defined(CONFIG_CPU_SH4) + yr = ctrl_inw(RYRCNT); + yr100 = (yr >> 8); + yr &= 0xff; +#else + yr = ctrl_inb(RYRCNT); + yr100 = (yr == 0x99) ? 0x19 : 0x20; +#endif + sec2 = ctrl_inb(R64CNT); + cf_bit = ctrl_inb(RCR1) & RCR1_CF; + local_irq_restore(flags); + } while (cf_bit != 0 || ((sec128 ^ sec2) & RTC_BIT_INVERTED) != 0); + + BCD_TO_BIN(yr100); + BCD_TO_BIN(yr); + BCD_TO_BIN(mon); + BCD_TO_BIN(day); + BCD_TO_BIN(hr); + BCD_TO_BIN(min); + BCD_TO_BIN(sec); + + if (yr > 99 || mon < 1 || mon > 12 || day > 31 || day < 1 || + hr > 23 || min > 59 || sec > 59) { + printk(KERN_ERR + "SH RTC: invalid value, resetting to 1 Jan 2000\n"); + local_irq_save(flags); + ctrl_outb(RCR2_RESET, RCR2); /* Reset & Stop */ + ctrl_outb(0, RSECCNT); + ctrl_outb(0, RMINCNT); + ctrl_outb(0, RHRCNT); + ctrl_outb(6, RWKCNT); + ctrl_outb(1, RDAYCNT); + ctrl_outb(1, RMONCNT); +#if defined(CONFIG_CPU_SH4) + ctrl_outw(0x2000, RYRCNT); +#else + ctrl_outb(0, RYRCNT); +#endif + ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2); /* Start */ + goto again; + } + +#if RTC_BIT_INVERTED != 0 + if ((sec128 & RTC_BIT_INVERTED)) + sec--; +#endif + + ts->tv_sec = mktime(yr100 * 100 + yr, mon, day, hr, min, sec); + ts->tv_nsec = ((sec128 * 1000000) / 128) * 1000; +} + +/* + * Changed to only care about tv_sec, and not the full timespec struct + * (i.e. tv_nsec). It can easily be switched to timespec for future cpus + * that support setting usec or nsec RTC values. + */ +int sh_rtc_settimeofday(const time_t secs) +{ + int retval = 0; + int real_seconds, real_minutes, cmos_minutes; + unsigned long flags; + + local_irq_save(flags); + ctrl_outb(RCR2_RESET, RCR2); /* Reset pre-scaler & stop RTC */ + + cmos_minutes = ctrl_inb(RMINCNT); + BCD_TO_BIN(cmos_minutes); + + /* + * since we're only adjusting minutes and seconds, + * don't interfere with hour overflow. This avoids + * messing with unknown time zones but requires your + * RTC not to be off by more than 15 minutes + */ + real_seconds = secs % 60; + real_minutes = secs / 60; + if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) + real_minutes += 30; /* correct for half hour time zone */ + real_minutes %= 60; + + if (abs(real_minutes - cmos_minutes) < 30) { + BIN_TO_BCD(real_seconds); + BIN_TO_BCD(real_minutes); + ctrl_outb(real_seconds, RSECCNT); + ctrl_outb(real_minutes, RMINCNT); + } else { + printk(KERN_WARNING + "set_rtc_time: can't update from %d to %d\n", + cmos_minutes, real_minutes); + retval = -1; + } + + ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2); /* Start RTC */ + local_irq_restore(flags); + + return retval; +} diff --git a/arch/sh/kernel/cpu/sh2/Makefile b/arch/sh/kernel/cpu/sh2/Makefile new file mode 100644 index 00000000000..389353fba60 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Linux/SuperH SH-2 backends. +# + +obj-y := probe.o + diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c new file mode 100644 index 00000000000..f17a2a0d588 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/probe.c @@ -0,0 +1,39 @@ +/* + * arch/sh/kernel/cpu/sh2/probe.c + * + * CPU Subtype Probing for SH-2. + * + * Copyright (C) 2002 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + + +#include <linux/init.h> +#include <asm/processor.h> +#include <asm/cache.h> + +int __init detect_cpu_and_cache_system(void) +{ + /* + * For now, assume SH7604 .. fix this later. + */ + cpu_data->type = CPU_SH7604; + cpu_data->dcache.ways = 4; + cpu_data->dcache.way_shift = 6; + cpu_data->dcache.sets = 64; + cpu_data->dcache.entry_shift = 4; + cpu_data->dcache.linesz = L1_CACHE_BYTES; + cpu_data->dcache.flags = 0; + + /* + * SH-2 doesn't have separate caches + */ + cpu_data->dcache.flags |= SH_CACHE_COMBINED; + cpu_data->icache = cpu_data->dcache; + + return 0; +} + diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile new file mode 100644 index 00000000000..a64532e4dc6 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Linux/SuperH SH-3 backends. +# + +obj-y := ex.o probe.o + diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S new file mode 100644 index 00000000000..966c0858b71 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/ex.S @@ -0,0 +1,199 @@ +/* + * arch/sh/kernel/cpu/sh3/ex.S + * + * The SH-3 exception vector table. + + * Copyright (C) 1999, 2000, 2002 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include <linux/linkage.h> +#include <linux/config.h> + + .align 2 + .data + +ENTRY(exception_handling_table) + .long exception_error /* 000 */ + .long exception_error +#if defined(CONFIG_MMU) + .long tlb_miss_load /* 040 */ + .long tlb_miss_store + .long initial_page_write + .long tlb_protection_violation_load + .long tlb_protection_violation_store + .long address_error_load + .long address_error_store /* 100 */ +#else + .long exception_error ! tlb miss load /* 040 */ + .long exception_error ! tlb miss store + .long exception_error ! initial page write + .long exception_error ! tlb prot violation load + .long exception_error ! tlb prot violation store + .long exception_error ! address error load + .long exception_error ! address error store /* 100 */ +#endif + .long exception_error ! fpu_exception /* 120 */ + .long exception_error /* 140 */ + .long system_call ! Unconditional Trap /* 160 */ + .long exception_error ! reserved_instruction (filled by trap_init) /* 180 */ + .long exception_error ! illegal_slot_instruction (filled by trap_init) /*1A0*/ +ENTRY(nmi_slot) +#if defined (CONFIG_KGDB_NMI) + .long debug_enter /* 1C0 */ ! Allow trap to debugger +#else + .long exception_none /* 1C0 */ ! Not implemented yet +#endif +ENTRY(user_break_point_trap) + .long break_point_trap /* 1E0 */ +ENTRY(interrupt_table) + ! external hardware + .long do_IRQ ! 0000 /* 200 */ + .long do_IRQ ! 0001 + .long do_IRQ ! 0010 + .long do_IRQ ! 0011 + .long do_IRQ ! 0100 + .long do_IRQ ! 0101 + .long do_IRQ ! 0110 + .long do_IRQ ! 0111 + .long do_IRQ ! 1000 /* 300 */ + .long do_IRQ ! 1001 + .long do_IRQ ! 1010 + .long do_IRQ ! 1011 + .long do_IRQ ! 1100 + .long do_IRQ ! 1101 + .long do_IRQ ! 1110 + .long exception_error + ! Internal hardware + .long do_IRQ ! TMU0 tuni0 /* 400 */ + .long do_IRQ ! TMU1 tuni1 + .long do_IRQ ! TMU2 tuni2 + .long do_IRQ ! ticpi2 + .long do_IRQ ! RTC ati + .long do_IRQ ! pri + .long do_IRQ ! cui + .long do_IRQ ! SCI eri + .long do_IRQ ! rxi /* 500 */ + .long do_IRQ ! txi + .long do_IRQ ! tei + .long do_IRQ ! WDT iti /* 560 */ + .long do_IRQ ! REF rcmi + .long do_IRQ ! rovi + .long do_IRQ + .long do_IRQ /* 5E0 */ +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) + .long do_IRQ ! 32 IRQ irq0 /* 600 */ + .long do_IRQ ! 33 irq1 + .long do_IRQ ! 34 irq2 + .long do_IRQ ! 35 irq3 + .long do_IRQ ! 36 irq4 + .long do_IRQ ! 37 irq5 + .long do_IRQ ! 38 + .long do_IRQ ! 39 + .long do_IRQ ! 40 PINT pint0-7 /* 700 */ + .long do_IRQ ! 41 pint8-15 + .long do_IRQ ! 42 + .long do_IRQ ! 43 + .long do_IRQ ! 44 + .long do_IRQ ! 45 + .long do_IRQ ! 46 + .long do_IRQ ! 47 + .long do_IRQ ! 48 DMAC dei0 /* 800 */ + .long do_IRQ ! 49 dei1 + .long do_IRQ ! 50 dei2 + .long do_IRQ ! 51 dei3 + .long do_IRQ ! 52 IrDA eri1 + .long do_IRQ ! 53 rxi1 + .long do_IRQ ! 54 bri1 + .long do_IRQ ! 55 txi1 + .long do_IRQ ! 56 SCIF eri2 + .long do_IRQ ! 57 rxi2 + .long do_IRQ ! 58 bri2 + .long do_IRQ ! 59 txi2 + .long do_IRQ ! 60 ADC adi /* 980 */ +#if defined(CONFIG_CPU_SUBTYPE_SH7705) + .long exception_none ! 61 /* 9A0 */ + .long exception_none ! 62 + .long exception_none ! 63 + .long exception_none ! 64 /* A00 */ + .long do_IRQ ! 65 USB usi0 + .long do_IRQ ! 66 usi1 + .long exception_none ! 67 + .long exception_none ! 68 + .long exception_none ! 69 + .long exception_none ! 70 + .long exception_none ! 71 + .long exception_none ! 72 /* B00 */ + .long exception_none ! 73 + .long exception_none ! 74 + .long exception_none ! 75 + .long exception_none ! 76 + .long exception_none ! 77 + .long exception_none ! 78 + .long exception_none ! 79 + .long do_IRQ ! 80 TPU0 tpi0 /* C00 */ + .long do_IRQ ! 81 TPU1 tpi1 + .long exception_none ! 82 + .long exception_none ! 83 + .long do_IRQ ! 84 TPU2 tpi2 + .long do_IRQ ! 85 TPU3 tpi3 /* CA0 */ +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7300) + .long do_IRQ ! 61 LCDC lcdi /* 9A0 */ + .long do_IRQ ! 62 PCC pcc0i + .long do_IRQ ! 63 pcc1i /* 9E0 */ +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7300) + .long do_IRQ ! 64 + .long do_IRQ ! 65 + .long do_IRQ ! 66 + .long do_IRQ ! 67 + .long do_IRQ ! 68 + .long do_IRQ ! 69 + .long do_IRQ ! 70 + .long do_IRQ ! 71 + .long do_IRQ ! 72 + .long do_IRQ ! 73 + .long do_IRQ ! 74 + .long do_IRQ ! 75 + .long do_IRQ ! 76 + .long do_IRQ ! 77 + .long do_IRQ ! 78 + .long do_IRQ ! 79 + .long do_IRQ ! 80 SCIF0(SH7300) + .long do_IRQ ! 81 + .long do_IRQ ! 82 + .long do_IRQ ! 83 + .long do_IRQ ! 84 + .long do_IRQ ! 85 + .long do_IRQ ! 86 + .long do_IRQ ! 87 + .long do_IRQ ! 88 + .long do_IRQ ! 89 + .long do_IRQ ! 90 + .long do_IRQ ! 91 + .long do_IRQ ! 92 + .long do_IRQ ! 93 + .long do_IRQ ! 94 + .long do_IRQ ! 95 + .long do_IRQ ! 96 + .long do_IRQ ! 97 + .long do_IRQ ! 98 + .long do_IRQ ! 99 + .long do_IRQ ! 100 + .long do_IRQ ! 101 + .long do_IRQ ! 102 + .long do_IRQ ! 103 + .long do_IRQ ! 104 + .long do_IRQ ! 105 + .long do_IRQ ! 106 + .long do_IRQ ! 107 + .long do_IRQ ! 108 +#endif +#endif + diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c new file mode 100644 index 00000000000..5cdc8863860 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/probe.c @@ -0,0 +1,97 @@ +/* + * arch/sh/kernel/cpu/sh3/probe.c + * + * CPU Subtype Probing for SH-3. + * + * Copyright (C) 1999, 2000 Niibe Yutaka + * Copyright (C) 2002 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/io.h> + +int __init detect_cpu_and_cache_system(void) +{ + unsigned long addr0, addr1, data0, data1, data2, data3; + + jump_to_P2(); + /* + * Check if the entry shadows or not. + * When shadowed, it's 128-entry system. + * Otherwise, it's 256-entry system. + */ + addr0 = CACHE_OC_ADDRESS_ARRAY + (3 << 12); + addr1 = CACHE_OC_ADDRESS_ARRAY + (1 << 12); + + /* First, write back & invalidate */ + data0 = ctrl_inl(addr0); + ctrl_outl(data0&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr0); + data1 = ctrl_inl(addr1); + ctrl_outl(data1&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr1); + + /* Next, check if there's shadow or not */ + data0 = ctrl_inl(addr0); + data0 ^= SH_CACHE_VALID; + ctrl_outl(data0, addr0); + data1 = ctrl_inl(addr1); + data2 = data1 ^ SH_CACHE_VALID; + ctrl_outl(data2, addr1); + data3 = ctrl_inl(addr0); + + /* Lastly, invaliate them. */ + ctrl_outl(data0&~SH_CACHE_VALID, addr0); + ctrl_outl(data2&~SH_CACHE_VALID, addr1); + + back_to_P1(); + + cpu_data->dcache.ways = 4; + cpu_data->dcache.entry_shift = 4; + cpu_data->dcache.linesz = L1_CACHE_BYTES; + cpu_data->dcache.flags = 0; + + /* + * 7709A/7729 has 16K cache (256-entry), while 7702 has only + * 2K(direct) 7702 is not supported (yet) + */ + if (data0 == data1 && data2 == data3) { /* Shadow */ + cpu_data->dcache.way_incr = (1 << 11); + cpu_data->dcache.entry_mask = 0x7f0; + cpu_data->dcache.sets = 128; + cpu_data->type = CPU_SH7708; + + cpu_data->flags |= CPU_HAS_MMU_PAGE_ASSOC; + } else { /* 7709A or 7729 */ + cpu_data->dcache.way_incr = (1 << 12); + cpu_data->dcache.entry_mask = 0xff0; + cpu_data->dcache.sets = 256; + cpu_data->type = CPU_SH7729; + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) + cpu_data->type = CPU_SH7705; + +#if defined(CONFIG_SH7705_CACHE_32KB) + cpu_data->dcache.way_incr = (1 << 13); + cpu_data->dcache.entry_mask = 0x1ff0; + cpu_data->dcache.sets = 512; + ctrl_outl(CCR_CACHE_32KB, CCR3); +#else + ctrl_outl(CCR_CACHE_16KB, CCR3); +#endif +#endif + } + + /* + * SH-3 doesn't have separate caches + */ + cpu_data->dcache.flags |= SH_CACHE_COMBINED; + cpu_data->icache = cpu_data->dcache; + + return 0; +} + diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile new file mode 100644 index 00000000000..ead1071eac7 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the Linux/SuperH SH-4 backends. +# + +obj-y := ex.o probe.o + +obj-$(CONFIG_SH_FPU) += fpu.o +obj-$(CONFIG_CPU_SUBTYPE_ST40STB1) += irq_intc2.o +obj-$(CONFIG_SH_STORE_QUEUES) += sq.o + diff --git a/arch/sh/kernel/cpu/sh4/ex.S b/arch/sh/kernel/cpu/sh4/ex.S new file mode 100644 index 00000000000..8221e9d1551 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/ex.S @@ -0,0 +1,384 @@ +/* + * arch/sh/kernel/cpu/sh4/ex.S + * + * The SH-4 exception vector table. + + * Copyright (C) 1999, 2000, 2002 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include <linux/linkage.h> +#include <linux/config.h> + + .align 2 + .data + +ENTRY(exception_handling_table) + .long exception_error /* 000 */ + .long exception_error +#if defined(CONFIG_MMU) + .long tlb_miss_load /* 040 */ + .long tlb_miss_store + .long initial_page_write + .long tlb_protection_violation_load + .long tlb_protection_violation_store + .long address_error_load + .long address_error_store /* 100 */ +#else + .long exception_error ! tlb miss load /* 040 */ + .long exception_error ! tlb miss store + .long exception_error ! initial page write + .long exception_error ! tlb prot violation load + .long exception_error ! tlb prot violation store + .long exception_error ! address error load + .long exception_error ! address error store /* 100 */ +#endif +#if defined(CONFIG_SH_FPU) + .long do_fpu_error /* 120 */ +#else + .long exception_error /* 120 */ +#endif + .long exception_error /* 140 */ + .long system_call ! Unconditional Trap /* 160 */ + .long exception_error ! reserved_instruction (filled by trap_init) /* 180 */ + .long exception_error ! illegal_slot_instruction (filled by trap_init) /*1A0*/ +ENTRY(nmi_slot) +#if defined (CONFIG_KGDB_NMI) + .long debug_enter /* 1C0 */ ! Allow trap to debugger +#else + .long exception_none /* 1C0 */ ! Not implemented yet +#endif +ENTRY(user_break_point_trap) + .long break_point_trap /* 1E0 */ +ENTRY(interrupt_table) + ! external hardware + .long do_IRQ ! 0000 /* 200 */ + .long do_IRQ ! 0001 + .long do_IRQ ! 0010 + .long do_IRQ ! 0011 + .long do_IRQ ! 0100 + .long do_IRQ ! 0101 + .long do_IRQ ! 0110 + .long do_IRQ ! 0111 + .long do_IRQ ! 1000 /* 300 */ + .long do_IRQ ! 1001 + .long do_IRQ ! 1010 + .long do_IRQ ! 1011 + .long do_IRQ ! 1100 + .long do_IRQ ! 1101 + .long do_IRQ ! 1110 + .long exception_error + ! Internal hardware + .long do_IRQ ! TMU0 tuni0 /* 400 */ + .long do_IRQ ! TMU1 tuni1 + .long do_IRQ ! TMU2 tuni2 + .long do_IRQ ! ticpi2 +#if defined(CONFIG_CPU_SUBTYPE_SH7760) + .long exception_error + .long exception_error + .long exception_error + .long exception_error + .long exception_error /* 500 */ + .long exception_error + .long exception_error +#else + .long do_IRQ ! RTC ati + .long do_IRQ ! pri + .long do_IRQ ! cui + .long do_IRQ ! SCI eri + .long do_IRQ ! rxi /* 500 */ + .long do_IRQ ! txi + .long do_IRQ ! tei +#endif + .long do_IRQ ! WDT iti /* 560 */ + .long do_IRQ ! REF rcmi + .long do_IRQ ! rovi + .long do_IRQ + .long do_IRQ /* 5E0 */ + .long do_IRQ ! 32 Hitachi UDI /* 600 */ + .long do_IRQ ! 33 GPIO + .long do_IRQ ! 34 DMAC dmte0 + .long do_IRQ ! 35 dmte1 + .long do_IRQ ! 36 dmte2 + .long do_IRQ ! 37 dmte3 + .long do_IRQ ! 38 dmae + .long exception_error ! 39 /* 6E0 */ +#if defined(CONFIG_CPU_SUBTYPE_SH7760) + .long exception_error /* 700 */ + .long exception_error + .long exception_error + .long exception_error /* 760 */ +#else + .long do_IRQ ! 40 SCIF eri /* 700 */ + .long do_IRQ ! 41 rxi + .long do_IRQ ! 42 bri + .long do_IRQ ! 43 txi +#endif +#if CONFIG_NR_ONCHIP_DMA_CHANNELS == 8 + .long do_IRQ ! 44 DMAC dmte4 /* 780 */ + .long do_IRQ ! 45 dmte5 + .long do_IRQ ! 46 dmte6 + .long do_IRQ ! 47 dmte7 /* 7E0 */ +#else + .long exception_error ! 44 /* 780 */ + .long exception_error ! 45 + .long exception_error ! 46 + .long exception_error ! 47 +#endif +#if defined(CONFIG_SH_FPU) + .long do_fpu_state_restore ! 48 /* 800 */ + .long do_fpu_state_restore ! 49 /* 820 */ +#else + .long exception_error + .long exception_error +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7751) + .long exception_error /* 840 */ + .long exception_error + .long exception_error + .long exception_error + .long exception_error + .long exception_error + .long exception_error /* 900 */ + .long exception_error + .long exception_error + .long exception_error + .long exception_error + .long exception_error + .long exception_error + .long exception_error + .long do_IRQ ! PCI serr /* A00 */ + .long do_IRQ ! dma3 + .long do_IRQ ! dma2 + .long do_IRQ ! dma1 + .long do_IRQ ! dma0 + .long do_IRQ ! pwon + .long do_IRQ ! pwdwn + .long do_IRQ ! err + .long do_IRQ ! TMU3 tuni3 /* B00 */ + .long exception_error + .long exception_error + .long exception_error + .long do_IRQ ! TMU4 tuni4 /* B80 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7760) + .long do_IRQ ! IRQ irq6 /* 840 */ + .long do_IRQ ! irq7 + .long do_IRQ ! SCIF eri0 + .long do_IRQ ! rxi0 + .long do_IRQ ! bri0 + .long do_IRQ ! txi0 + .long do_IRQ ! HCAN2 cani0 /* 900 */ + .long do_IRQ ! cani1 + .long do_IRQ ! SSI ssii0 + .long do_IRQ ! ssii1 + .long do_IRQ ! HAC haci0 + .long do_IRQ ! haci1 + .long do_IRQ ! IIC iici0 + .long do_IRQ ! iici1 + .long do_IRQ ! USB usbi /* A00 */ + .long do_IRQ ! LCDC vint + .long exception_error + .long exception_error + .long do_IRQ ! DMABRG dmabrgi0 + .long do_IRQ ! dmabrgi1 + .long do_IRQ ! dmabrgi2 + .long exception_error + .long do_IRQ ! SCIF eri1 /* B00 */ + .long do_IRQ ! rxi1 + .long do_IRQ ! bri1 + .long do_IRQ ! txi1 + .long do_IRQ ! eri2 + .long do_IRQ ! rxi2 + .long do_IRQ ! bri2 + .long do_IRQ ! txi2 + .long do_IRQ ! SIM simeri /* C00 */ + .long do_IRQ ! simrxi + .long do_IRQ ! simtxi + .long do_IRQ ! simtei + .long do_IRQ ! HSPI spii + .long exception_error + .long exception_error + .long exception_error + .long do_IRQ ! MMCIF mmci0 /* D00 */ + .long do_IRQ ! mmci1 + .long do_IRQ ! mmci2 + .long do_IRQ ! mmci3 + .long exception_error + .long exception_error + .long exception_error + .long exception_error + .long exception_error /* E00 */ + .long exception_error + .long exception_error + .long exception_error + .long do_IRQ ! MFI mfii + .long exception_error + .long exception_error + .long exception_error + .long exception_error /* F00 */ + .long exception_error + .long exception_error + .long exception_error + .long do_IRQ ! ADC adi + .long do_IRQ ! CMT cmti /* FA0 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH73180) + .long do_IRQ ! 50 0x840 + .long do_IRQ ! 51 0x860 + .long do_IRQ ! 52 0x880 + .long do_IRQ ! 53 0x8a0 + .long do_IRQ ! 54 0x8c0 + .long do_IRQ ! 55 0x8e0 + .long do_IRQ ! 56 0x900 + .long do_IRQ ! 57 0x920 + .long do_IRQ ! 58 0x940 + .long do_IRQ ! 59 0x960 + .long do_IRQ ! 60 0x980 + .long do_IRQ ! 61 0x9a0 + .long do_IRQ ! 62 0x9c0 + .long do_IRQ ! 63 0x9e0 + .long do_IRQ ! 64 0xa00 + .long do_IRQ ! 65 0xa20 + .long do_IRQ ! 66 0xa40 + .long do_IRQ ! 67 0xa60 + .long do_IRQ ! 68 0xa80 + .long do_IRQ ! 69 0xaa0 + .long do_IRQ ! 70 0xac0 + .long do_IRQ ! 71 0xae0 + .long do_IRQ ! 72 0xb00 + .long do_IRQ ! 73 0xb20 + .long do_IRQ ! 74 0xb40 + .long do_IRQ ! 75 0xb60 + .long do_IRQ ! 76 0xb80 + .long do_IRQ ! 77 0xba0 + .long do_IRQ ! 78 0xbc0 + .long do_IRQ ! 79 0xbe0 + .long do_IRQ ! 80 0xc00 + .long do_IRQ ! 81 0xc20 + .long do_IRQ ! 82 0xc40 + .long do_IRQ ! 83 0xc60 + .long do_IRQ ! 84 0xc80 + .long do_IRQ ! 85 0xca0 + .long do_IRQ ! 86 0xcc0 + .long do_IRQ ! 87 0xce0 + .long do_IRQ ! 88 0xd00 + .long do_IRQ ! 89 0xd20 + .long do_IRQ ! 90 0xd40 + .long do_IRQ ! 91 0xd60 + .long do_IRQ ! 92 0xd80 + .long do_IRQ ! 93 0xda0 + .long do_IRQ ! 94 0xdc0 + .long do_IRQ ! 95 0xde0 + .long do_IRQ ! 96 0xe00 + .long do_IRQ ! 97 0xe20 + .long do_IRQ ! 98 0xe40 + .long do_IRQ ! 99 0xe60 + .long do_IRQ ! 100 0xe80 + .long do_IRQ ! 101 0xea0 + .long do_IRQ ! 102 0xec0 + .long do_IRQ ! 103 0xee0 + .long do_IRQ ! 104 0xf00 + .long do_IRQ ! 105 0xf20 + .long do_IRQ ! 106 0xf40 + .long do_IRQ ! 107 0xf60 + .long do_IRQ ! 108 0xf80 +#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) + .long exception_error ! 50 0x840 + .long exception_error ! 51 0x860 + .long exception_error ! 52 0x880 + .long exception_error ! 53 0x8a0 + .long exception_error ! 54 0x8c0 + .long exception_error ! 55 0x8e0 + .long exception_error ! 56 0x900 + .long exception_error ! 57 0x920 + .long exception_error ! 58 0x940 + .long exception_error ! 59 0x960 + .long exception_error ! 60 0x980 + .long exception_error ! 61 0x9a0 + .long exception_error ! 62 0x9c0 + .long exception_error ! 63 0x9e0 + .long do_IRQ ! 64 0xa00 PCI serr + .long do_IRQ ! 65 0xa20 err + .long do_IRQ ! 66 0xa40 ad + .long do_IRQ ! 67 0xa60 pwr_dwn + .long exception_error ! 68 0xa80 + .long exception_error ! 69 0xaa0 + .long exception_error ! 70 0xac0 + .long exception_error ! 71 0xae0 + .long do_IRQ ! 72 0xb00 DMA INT0 + .long do_IRQ ! 73 0xb20 INT1 + .long do_IRQ ! 74 0xb40 INT2 + .long do_IRQ ! 75 0xb60 INT3 + .long do_IRQ ! 76 0xb80 INT4 + .long exception_error ! 77 0xba0 + .long do_IRQ ! 78 0xbc0 DMA ERR + .long exception_error ! 79 0xbe0 + .long do_IRQ ! 80 0xc00 PIO0 + .long do_IRQ ! 81 0xc20 PIO1 + .long do_IRQ ! 82 0xc40 PIO2 + .long exception_error ! 83 0xc60 + .long exception_error ! 84 0xc80 + .long exception_error ! 85 0xca0 + .long exception_error ! 86 0xcc0 + .long exception_error ! 87 0xce0 + .long exception_error ! 88 0xd00 + .long exception_error ! 89 0xd20 + .long exception_error ! 90 0xd40 + .long exception_error ! 91 0xd60 + .long exception_error ! 92 0xd80 + .long exception_error ! 93 0xda0 + .long exception_error ! 94 0xdc0 + .long exception_error ! 95 0xde0 + .long exception_error ! 96 0xe00 + .long exception_error ! 97 0xe20 + .long exception_error ! 98 0xe40 + .long exception_error ! 99 0xe60 + .long exception_error ! 100 0xe80 + .long exception_error ! 101 0xea0 + .long exception_error ! 102 0xec0 + .long exception_error ! 103 0xee0 + .long exception_error ! 104 0xf00 + .long exception_error ! 105 0xf20 + .long exception_error ! 106 0xf40 + .long exception_error ! 107 0xf60 + .long exception_error ! 108 0xf80 + .long exception_error ! 109 0xfa0 + .long exception_error ! 110 0xfc0 + .long exception_error ! 111 0xfe0 + .long do_IRQ ! 112 0x1000 Mailbox + .long exception_error ! 113 0x1020 + .long exception_error ! 114 0x1040 + .long exception_error ! 115 0x1060 + .long exception_error ! 116 0x1080 + .long exception_error ! 117 0x10a0 + .long exception_error ! 118 0x10c0 + .long exception_error ! 119 0x10e0 + .long exception_error ! 120 0x1100 + .long exception_error ! 121 0x1120 + .long exception_error ! 122 0x1140 + .long exception_error ! 123 0x1160 + .long exception_error ! 124 0x1180 + .long exception_error ! 125 0x11a0 + .long exception_error ! 126 0x11c0 + .long exception_error ! 127 0x11e0 + .long exception_error ! 128 0x1200 + .long exception_error ! 129 0x1220 + .long exception_error ! 130 0x1240 + .long exception_error ! 131 0x1260 + .long exception_error ! 132 0x1280 + .long exception_error ! 133 0x12a0 + .long exception_error ! 134 0x12c0 + .long exception_error ! 135 0x12e0 + .long exception_error ! 136 0x1300 + .long exception_error ! 137 0x1320 + .long exception_error ! 138 0x1340 + .long exception_error ! 139 0x1360 + .long do_IRQ ! 140 0x1380 EMPI INV_ADDR + .long exception_error ! 141 0x13a0 + .long exception_error ! 142 0x13c0 + .long exception_error ! 143 0x13e0 +#endif + diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c new file mode 100644 index 00000000000..f486c07e10e --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -0,0 +1,335 @@ +/* $Id: fpu.c,v 1.4 2004/01/13 05:52:11 kkojima Exp $ + * + * linux/arch/sh/kernel/fpu.c + * + * Save/restore floating point context for signal handlers. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka + * + * FIXME! These routines can be optimized in big endian case. + */ + +#include <linux/sched.h> +#include <linux/signal.h> +#include <asm/processor.h> +#include <asm/io.h> + +/* The PR (precision) bit in the FP Status Register must be clear when + * an frchg instruction is executed, otherwise the instruction is undefined. + * Executing frchg with PR set causes a trap on some SH4 implementations. + */ + +#define FPSCR_RCHG 0x00000000 + + +/* + * Save FPU registers onto task structure. + * Assume called with FPU enabled (SR.FD=0). + */ +void +save_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + unsigned long dummy; + + clear_tsk_thread_flag(tsk, TIF_USEDFPU); + enable_fpu(); + asm volatile("sts.l fpul, @-%0\n\t" + "sts.l fpscr, @-%0\n\t" + "lds %2, fpscr\n\t" + "frchg\n\t" + "fmov.s fr15, @-%0\n\t" + "fmov.s fr14, @-%0\n\t" + "fmov.s fr13, @-%0\n\t" + "fmov.s fr12, @-%0\n\t" + "fmov.s fr11, @-%0\n\t" + "fmov.s fr10, @-%0\n\t" + "fmov.s fr9, @-%0\n\t" + "fmov.s fr8, @-%0\n\t" + "fmov.s fr7, @-%0\n\t" + "fmov.s fr6, @-%0\n\t" + "fmov.s fr5, @-%0\n\t" + "fmov.s fr4, @-%0\n\t" + "fmov.s fr3, @-%0\n\t" + "fmov.s fr2, @-%0\n\t" + "fmov.s fr1, @-%0\n\t" + "fmov.s fr0, @-%0\n\t" + "frchg\n\t" + "fmov.s fr15, @-%0\n\t" + "fmov.s fr14, @-%0\n\t" + "fmov.s fr13, @-%0\n\t" + "fmov.s fr12, @-%0\n\t" + "fmov.s fr11, @-%0\n\t" + "fmov.s fr10, @-%0\n\t" + "fmov.s fr9, @-%0\n\t" + "fmov.s fr8, @-%0\n\t" + "fmov.s fr7, @-%0\n\t" + "fmov.s fr6, @-%0\n\t" + "fmov.s fr5, @-%0\n\t" + "fmov.s fr4, @-%0\n\t" + "fmov.s fr3, @-%0\n\t" + "fmov.s fr2, @-%0\n\t" + "fmov.s fr1, @-%0\n\t" + "fmov.s fr0, @-%0\n\t" + "lds %3, fpscr\n\t" + : "=r" (dummy) + : "0" ((char *)(&tsk->thread.fpu.hard.status)), + "r" (FPSCR_RCHG), + "r" (FPSCR_INIT) + : "memory"); + + disable_fpu(); + release_fpu(regs); +} + +static void +restore_fpu(struct task_struct *tsk) +{ + unsigned long dummy; + + enable_fpu(); + asm volatile("lds %2, fpscr\n\t" + "fmov.s @%0+, fr0\n\t" + "fmov.s @%0+, fr1\n\t" + "fmov.s @%0+, fr2\n\t" + "fmov.s @%0+, fr3\n\t" + "fmov.s @%0+, fr4\n\t" + "fmov.s @%0+, fr5\n\t" + "fmov.s @%0+, fr6\n\t" + "fmov.s @%0+, fr7\n\t" + "fmov.s @%0+, fr8\n\t" + "fmov.s @%0+, fr9\n\t" + "fmov.s @%0+, fr10\n\t" + "fmov.s @%0+, fr11\n\t" + "fmov.s @%0+, fr12\n\t" + "fmov.s @%0+, fr13\n\t" + "fmov.s @%0+, fr14\n\t" + "fmov.s @%0+, fr15\n\t" + "frchg\n\t" + "fmov.s @%0+, fr0\n\t" + "fmov.s @%0+, fr1\n\t" + "fmov.s @%0+, fr2\n\t" + "fmov.s @%0+, fr3\n\t" + "fmov.s @%0+, fr4\n\t" + "fmov.s @%0+, fr5\n\t" + "fmov.s @%0+, fr6\n\t" + "fmov.s @%0+, fr7\n\t" + "fmov.s @%0+, fr8\n\t" + "fmov.s @%0+, fr9\n\t" + "fmov.s @%0+, fr10\n\t" + "fmov.s @%0+, fr11\n\t" + "fmov.s @%0+, fr12\n\t" + "fmov.s @%0+, fr13\n\t" + "fmov.s @%0+, fr14\n\t" + "fmov.s @%0+, fr15\n\t" + "frchg\n\t" + "lds.l @%0+, fpscr\n\t" + "lds.l @%0+, fpul\n\t" + : "=r" (dummy) + : "0" (&tsk->thread.fpu), "r" (FPSCR_RCHG) + : "memory"); + disable_fpu(); +} + +/* + * Load the FPU with signalling NANS. This bit pattern we're using + * has the property that no matter wether considered as single or as + * double precission represents signaling NANS. + */ + +static void +fpu_init(void) +{ + enable_fpu(); + asm volatile("lds %0, fpul\n\t" + "lds %1, fpscr\n\t" + "fsts fpul, fr0\n\t" + "fsts fpul, fr1\n\t" + "fsts fpul, fr2\n\t" + "fsts fpul, fr3\n\t" + "fsts fpul, fr4\n\t" + "fsts fpul, fr5\n\t" + "fsts fpul, fr6\n\t" + "fsts fpul, fr7\n\t" + "fsts fpul, fr8\n\t" + "fsts fpul, fr9\n\t" + "fsts fpul, fr10\n\t" + "fsts fpul, fr11\n\t" + "fsts fpul, fr12\n\t" + "fsts fpul, fr13\n\t" + "fsts fpul, fr14\n\t" + "fsts fpul, fr15\n\t" + "frchg\n\t" + "fsts fpul, fr0\n\t" + "fsts fpul, fr1\n\t" + "fsts fpul, fr2\n\t" + "fsts fpul, fr3\n\t" + "fsts fpul, fr4\n\t" + "fsts fpul, fr5\n\t" + "fsts fpul, fr6\n\t" + "fsts fpul, fr7\n\t" + "fsts fpul, fr8\n\t" + "fsts fpul, fr9\n\t" + "fsts fpul, fr10\n\t" + "fsts fpul, fr11\n\t" + "fsts fpul, fr12\n\t" + "fsts fpul, fr13\n\t" + "fsts fpul, fr14\n\t" + "fsts fpul, fr15\n\t" + "frchg\n\t" + "lds %2, fpscr\n\t" + : /* no output */ + : "r" (0), "r" (FPSCR_RCHG), "r" (FPSCR_INIT)); + disable_fpu(); +} + +/** + * denormal_to_double - Given denormalized float number, + * store double float + * + * @fpu: Pointer to sh_fpu_hard structure + * @n: Index to FP register + */ +static void +denormal_to_double (struct sh_fpu_hard_struct *fpu, int n) +{ + unsigned long du, dl; + unsigned long x = fpu->fpul; + int exp = 1023 - 126; + + if (x != 0 && (x & 0x7f800000) == 0) { + du = (x & 0x80000000); + while ((x & 0x00800000) == 0) { + x <<= 1; + exp--; + } + x &= 0x007fffff; + du |= (exp << 20) | (x >> 3); + dl = x << 29; + + fpu->fp_regs[n] = du; + fpu->fp_regs[n+1] = dl; + } +} + +/** + * ieee_fpe_handler - Handle denormalized number exception + * + * @regs: Pointer to register structure + * + * Returns 1 when it's handled (should not cause exception). + */ +static int +ieee_fpe_handler (struct pt_regs *regs) +{ + unsigned short insn = *(unsigned short *) regs->pc; + unsigned short finsn; + unsigned long nextpc; + int nib[4] = { + (insn >> 12) & 0xf, + (insn >> 8) & 0xf, + (insn >> 4) & 0xf, + insn & 0xf}; + + if (nib[0] == 0xb || + (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */ + regs->pr = regs->pc + 4; + + if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */ + nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3); + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */ + if (regs->sr & 1) + nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1); + else + nextpc = regs->pc + 4; + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */ + if (regs->sr & 1) + nextpc = regs->pc + 4; + else + nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1); + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x4 && nib[3] == 0xb && + (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */ + nextpc = regs->regs[nib[1]]; + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x0 && nib[3] == 0x3 && + (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */ + nextpc = regs->pc + 4 + regs->regs[nib[1]]; + finsn = *(unsigned short *) (regs->pc + 2); + } else if (insn == 0x000b) { /* rts */ + nextpc = regs->pr; + finsn = *(unsigned short *) (regs->pc + 2); + } else { + nextpc = regs->pc + 2; + finsn = insn; + } + + if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */ + struct task_struct *tsk = current; + + save_fpu(tsk, regs); + if ((tsk->thread.fpu.hard.fpscr & (1 << 17))) { + /* FPU error */ + denormal_to_double (&tsk->thread.fpu.hard, + (finsn >> 8) & 0xf); + tsk->thread.fpu.hard.fpscr &= + ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK); + grab_fpu(regs); + restore_fpu(tsk); + set_tsk_thread_flag(tsk, TIF_USEDFPU); + } else { + tsk->thread.trap_no = 11; + tsk->thread.error_code = 0; + force_sig(SIGFPE, tsk); + } + + regs->pc = nextpc; + return 1; + } + + return 0; +} + +asmlinkage void +do_fpu_error(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + struct task_struct *tsk = current; + + if (ieee_fpe_handler (®s)) + return; + + regs.pc += 2; + save_fpu(tsk, ®s); + tsk->thread.trap_no = 11; + tsk->thread.error_code = 0; + force_sig(SIGFPE, tsk); +} + +asmlinkage void +do_fpu_state_restore(unsigned long r4, unsigned long r5, unsigned long r6, + unsigned long r7, struct pt_regs regs) +{ + struct task_struct *tsk = current; + + grab_fpu(®s); + if (!user_mode(®s)) { + printk(KERN_ERR "BUG: FPU is used in kernel mode.\n"); + return; + } + + if (used_math()) { + /* Using the FPU again. */ + restore_fpu(tsk); + } else { + /* First time FPU user. */ + fpu_init(); + set_used_math(); + } + set_tsk_thread_flag(tsk, TIF_USEDFPU); +} diff --git a/arch/sh/kernel/cpu/sh4/irq_intc2.c b/arch/sh/kernel/cpu/sh4/irq_intc2.c new file mode 100644 index 00000000000..099ebbf8974 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/irq_intc2.c @@ -0,0 +1,222 @@ +/* + * linux/arch/sh/kernel/irq_intc2.c + * + * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Interrupt handling for INTC2-based IRQ. + * + * These are the "new Hitachi style" interrupts, as present on the + * Hitachi 7751 and the STM ST40 STB1. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/machvec.h> + + +struct intc2_data { + unsigned char msk_offset; + unsigned char msk_shift; +#ifdef CONFIG_CPU_SUBTYPE_ST40 + int (*clear_irq) (int); +#endif +}; + + +static struct intc2_data intc2_data[NR_INTC2_IRQS]; + +static void enable_intc2_irq(unsigned int irq); +static void disable_intc2_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_intc2_irq disable_intc2_irq + +static void mask_and_ack_intc2(unsigned int); +static void end_intc2_irq(unsigned int irq); + +static unsigned int startup_intc2_irq(unsigned int irq) +{ + enable_intc2_irq(irq); + return 0; /* never anything pending */ +} + +static struct hw_interrupt_type intc2_irq_type = { + "INTC2-IRQ", + startup_intc2_irq, + shutdown_intc2_irq, + enable_intc2_irq, + disable_intc2_irq, + mask_and_ack_intc2, + end_intc2_irq +}; + +static void disable_intc2_irq(unsigned int irq) +{ + int irq_offset = irq - INTC2_FIRST_IRQ; + int msk_shift, msk_offset; + + // Sanity check + if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS)) + return; + + msk_shift = intc2_data[irq_offset].msk_shift; + msk_offset = intc2_data[irq_offset].msk_offset; + + ctrl_outl(1<<msk_shift, + INTC2_BASE+INTC2_INTMSK_OFFSET+msk_offset); +} + +static void enable_intc2_irq(unsigned int irq) +{ + int irq_offset = irq - INTC2_FIRST_IRQ; + int msk_shift, msk_offset; + + /* Sanity check */ + if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS)) + return; + + msk_shift = intc2_data[irq_offset].msk_shift; + msk_offset = intc2_data[irq_offset].msk_offset; + + ctrl_outl(1<<msk_shift, + INTC2_BASE+INTC2_INTMSKCLR_OFFSET+msk_offset); +} + +static void mask_and_ack_intc2(unsigned int irq) +{ + disable_intc2_irq(irq); +} + +static void end_intc2_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_intc2_irq(irq); + +#ifdef CONFIG_CPU_SUBTYPE_ST40 + if (intc2_data[irq - INTC2_FIRST_IRQ].clear_irq) + intc2_data[irq - INTC2_FIRST_IRQ].clear_irq (irq); +#endif +} + +/* + * Setup an INTC2 style interrupt. + * NOTE: Unlike IPR interrupts, parameters are not shifted by this code, + * allowing the use of the numbers straight out of the datasheet. + * For example: + * PIO1 which is INTPRI00[19,16] and INTMSK00[13] + * would be: ^ ^ ^ ^ + * | | | | + * make_intc2_irq(84, 0, 16, 0, 13); + */ +void make_intc2_irq(unsigned int irq, + unsigned int ipr_offset, unsigned int ipr_shift, + unsigned int msk_offset, unsigned int msk_shift, + unsigned int priority) +{ + int irq_offset = irq - INTC2_FIRST_IRQ; + unsigned int flags; + unsigned long ipr; + + if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS)) + return; + + disable_irq_nosync(irq); + + /* Fill the data we need */ + intc2_data[irq_offset].msk_offset = msk_offset; + intc2_data[irq_offset].msk_shift = msk_shift; +#ifdef CONFIG_CPU_SUBTYPE_ST40 + intc2_data[irq_offset].clear_irq = NULL; +#endif + + /* Set the priority level */ + local_irq_save(flags); + + ipr=ctrl_inl(INTC2_BASE+INTC2_INTPRI_OFFSET+ipr_offset); + ipr&=~(0xf<<ipr_shift); + ipr|=(priority)<<ipr_shift; + ctrl_outl(ipr, INTC2_BASE+INTC2_INTPRI_OFFSET+ipr_offset); + + local_irq_restore(flags); + + irq_desc[irq].handler=&intc2_irq_type; + + disable_intc2_irq(irq); +} + +#ifdef CONFIG_CPU_SUBTYPE_ST40 + +struct intc2_init { + unsigned short irq; + unsigned char ipr_offset, ipr_shift; + unsigned char msk_offset, msk_shift; +}; + +static struct intc2_init intc2_init_data[] __initdata = { + {64, 0, 0, 0, 0}, /* PCI serr */ + {65, 0, 4, 0, 1}, /* PCI err */ + {66, 0, 4, 0, 2}, /* PCI ad */ + {67, 0, 4, 0, 3}, /* PCI pwd down */ + {72, 0, 8, 0, 5}, /* DMAC INT0 */ + {73, 0, 8, 0, 6}, /* DMAC INT1 */ + {74, 0, 8, 0, 7}, /* DMAC INT2 */ + {75, 0, 8, 0, 8}, /* DMAC INT3 */ + {76, 0, 8, 0, 9}, /* DMAC INT4 */ + {78, 0, 8, 0, 11}, /* DMAC ERR */ + {80, 0, 12, 0, 12}, /* PIO0 */ + {84, 0, 16, 0, 13}, /* PIO1 */ + {88, 0, 20, 0, 14}, /* PIO2 */ + {112, 4, 0, 4, 0}, /* Mailbox */ +#ifdef CONFIG_CPU_SUBTYPE_ST40GX1 + {116, 4, 4, 4, 4}, /* SSC0 */ + {120, 4, 8, 4, 8}, /* IR Blaster */ + {124, 4, 12, 4, 12}, /* USB host */ + {128, 4, 16, 4, 16}, /* Video processor BLITTER */ + {132, 4, 20, 4, 20}, /* UART0 */ + {134, 4, 20, 4, 22}, /* UART2 */ + {136, 4, 24, 4, 24}, /* IO_PIO0 */ + {140, 4, 28, 4, 28}, /* EMPI */ + {144, 8, 0, 8, 0}, /* MAFE */ + {148, 8, 4, 8, 4}, /* PWM */ + {152, 8, 8, 8, 8}, /* SSC1 */ + {156, 8, 12, 8, 12}, /* IO_PIO1 */ + {160, 8, 16, 8, 16}, /* USB target */ + {164, 8, 20, 8, 20}, /* UART1 */ + {168, 8, 24, 8, 24}, /* Teletext */ + {172, 8, 28, 8, 28}, /* VideoSync VTG */ + {173, 8, 28, 8, 29}, /* VideoSync DVP0 */ + {174, 8, 28, 8, 30}, /* VideoSync DVP1 */ +#endif +}; + +void __init init_IRQ_intc2(void) +{ + struct intc2_init *p; + + printk(KERN_ALERT "init_IRQ_intc2\n"); + + for (p = intc2_init_data; + p<intc2_init_data+ARRAY_SIZE(intc2_init_data); + p++) { + make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift, + p-> msk_offset, p->msk_shift, 13); + } +} + +/* Adds a termination callback to the interrupt */ +void intc2_add_clear_irq(int irq, int (*fn)(int)) +{ + if (irq < INTC2_FIRST_IRQ) + return; + + intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn; +} + +#endif /* CONFIG_CPU_SUBTYPE_ST40 */ diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c new file mode 100644 index 00000000000..42427b79697 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -0,0 +1,138 @@ +/* + * arch/sh/kernel/cpu/sh4/probe.c + * + * CPU Subtype Probing for SH-4. + * + * Copyright (C) 2001, 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2003 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/io.h> + +int __init detect_cpu_and_cache_system(void) +{ + unsigned long pvr, prr, cvr; + unsigned long size; + + static unsigned long sizes[16] = { + [1] = (1 << 12), + [2] = (1 << 13), + [4] = (1 << 14), + [8] = (1 << 15), + [9] = (1 << 16) + }; + + pvr = (ctrl_inl(CCN_PVR) >> 8) & 0xffff; + prr = (ctrl_inl(CCN_PRR) >> 4) & 0xff; + cvr = (ctrl_inl(CCN_CVR)); + + /* + * Setup some sane SH-4 defaults for the icache + */ + cpu_data->icache.way_incr = (1 << 13); + cpu_data->icache.entry_shift = 5; + cpu_data->icache.entry_mask = 0x1fe0; + cpu_data->icache.sets = 256; + cpu_data->icache.ways = 1; + cpu_data->icache.linesz = L1_CACHE_BYTES; + + /* + * And again for the dcache .. + */ + cpu_data->dcache.way_incr = (1 << 14); + cpu_data->dcache.entry_shift = 5; + cpu_data->dcache.entry_mask = 0x3fe0; + cpu_data->dcache.sets = 512; + cpu_data->dcache.ways = 1; + cpu_data->dcache.linesz = L1_CACHE_BYTES; + + /* Set the FPU flag, virtually all SH-4's have one */ + cpu_data->flags |= CPU_HAS_FPU; + + /* + * Probe the underlying processor version/revision and + * adjust cpu_data setup accordingly. + */ + switch (pvr) { + case 0x205: + cpu_data->type = CPU_SH7750; + cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_PERF_COUNTER; + break; + case 0x206: + cpu_data->type = CPU_SH7750S; + cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_PERF_COUNTER; + break; + case 0x1100: + cpu_data->type = CPU_SH7751; + break; + case 0x2000: + cpu_data->type = CPU_SH73180; + cpu_data->icache.ways = 4; + cpu_data->dcache.ways = 4; + cpu_data->flags &= ~CPU_HAS_FPU; + break; + case 0x8000: + cpu_data->type = CPU_ST40RA; + break; + case 0x8100: + cpu_data->type = CPU_ST40GX1; + break; + case 0x700: + cpu_data->type = CPU_SH4_501; + cpu_data->icache.ways = 2; + cpu_data->dcache.ways = 2; + + /* No FPU on the SH4-500 series.. */ + cpu_data->flags &= ~CPU_HAS_FPU; + break; + case 0x600: + cpu_data->type = CPU_SH4_202; + cpu_data->icache.ways = 2; + cpu_data->dcache.ways = 2; + break; + case 0x500 ... 0x501: + switch (prr) { + case 0x10: cpu_data->type = CPU_SH7750R; break; + case 0x11: cpu_data->type = CPU_SH7751R; break; + case 0x50: cpu_data->type = CPU_SH7760; break; + } + + cpu_data->icache.ways = 2; + cpu_data->dcache.ways = 2; + + break; + default: + cpu_data->type = CPU_SH_NONE; + break; + } + + /* + * On anything that's not a direct-mapped cache, look to the CVR + * for I/D-cache specifics. + */ + if (cpu_data->icache.ways > 1) { + size = sizes[(cvr >> 20) & 0xf]; + cpu_data->icache.way_incr = (size >> 1); + cpu_data->icache.sets = (size >> 6); + cpu_data->icache.entry_mask = + (cpu_data->icache.way_incr - (1 << 5)); + } + + if (cpu_data->dcache.ways > 1) { + size = sizes[(cvr >> 16) & 0xf]; + cpu_data->dcache.way_incr = (size >> 1); + cpu_data->dcache.sets = (size >> 6); + cpu_data->dcache.entry_mask = + (cpu_data->dcache.way_incr - (1 << 5)); + } + + return 0; +} + diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c new file mode 100644 index 00000000000..8437ea7430f --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -0,0 +1,453 @@ +/* + * arch/sh/kernel/cpu/sq.c + * + * General management API for SH-4 integrated Store Queues + * + * Copyright (C) 2001, 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2001, 2002 M. R. Brown + * + * Some of this code has been adopted directly from the old arch/sh/mm/sq.c + * hack that was part of the LinuxDC project. For all intents and purposes, + * this is a completely new interface that really doesn't have much in common + * with the old zone-based approach at all. In fact, it's only listed here for + * general completeness. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/config.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/proc_fs.h> +#include <linux/miscdevice.h> +#include <linux/vmalloc.h> + +#include <asm/io.h> +#include <asm/page.h> +#include <asm/mmu_context.h> +#include <asm/cpu/sq.h> + +static LIST_HEAD(sq_mapping_list); +static DEFINE_SPINLOCK(sq_mapping_lock); + +/** + * sq_flush - Flush (prefetch) the store queue cache + * @addr: the store queue address to flush + * + * Executes a prefetch instruction on the specified store queue cache, + * so that the cached data is written to physical memory. + */ +inline void sq_flush(void *addr) +{ + __asm__ __volatile__ ("pref @%0" : : "r" (addr) : "memory"); +} + +/** + * sq_flush_range - Flush (prefetch) a specific SQ range + * @start: the store queue address to start flushing from + * @len: the length to flush + * + * Flushes the store queue cache from @start to @start + @len in a + * linear fashion. + */ +void sq_flush_range(unsigned long start, unsigned int len) +{ + volatile unsigned long *sq = (unsigned long *)start; + unsigned long dummy; + + /* Flush the queues */ + for (len >>= 5; len--; sq += 8) + sq_flush((void *)sq); + + /* Wait for completion */ + dummy = ctrl_inl(P4SEG_STORE_QUE); + + ctrl_outl(0, P4SEG_STORE_QUE + 0); + ctrl_outl(0, P4SEG_STORE_QUE + 8); +} + +static struct sq_mapping *__sq_alloc_mapping(unsigned long virt, unsigned long phys, unsigned long size, const char *name) +{ + struct sq_mapping *map; + + if (virt + size > SQ_ADDRMAX) + return ERR_PTR(-ENOSPC); + + map = kmalloc(sizeof(struct sq_mapping), GFP_KERNEL); + if (!map) + return ERR_PTR(-ENOMEM); + + INIT_LIST_HEAD(&map->list); + + map->sq_addr = virt; + map->addr = phys; + map->size = size + 1; + map->name = name; + + list_add(&map->list, &sq_mapping_list); + + return map; +} + +static unsigned long __sq_get_next_addr(void) +{ + if (!list_empty(&sq_mapping_list)) { + struct list_head *pos, *tmp; + + /* + * Read one off the list head, as it will have the highest + * mapped allocation. Set the next one up right above it. + * + * This is somewhat sub-optimal, as we don't look at + * gaps between allocations or anything lower then the + * highest-level allocation. + * + * However, in the interest of performance and the general + * lack of desire to do constant list rebalancing, we don't + * worry about it. + */ + list_for_each_safe(pos, tmp, &sq_mapping_list) { + struct sq_mapping *entry; + + entry = list_entry(pos, typeof(*entry), list); + + return entry->sq_addr + entry->size; + } + } + + return P4SEG_STORE_QUE; +} + +/** + * __sq_remap - Perform a translation from the SQ to a phys addr + * @map: sq mapping containing phys and store queue addresses. + * + * Maps the store queue address specified in the mapping to the physical + * address specified in the mapping. + */ +static struct sq_mapping *__sq_remap(struct sq_mapping *map) +{ + unsigned long flags, pteh, ptel; + struct vm_struct *vma; + pgprot_t pgprot; + + /* + * Without an MMU (or with it turned off), this is much more + * straightforward, as we can just load up each queue's QACR with + * the physical address appropriately masked. + */ + + ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0); + ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1); + +#ifdef CONFIG_MMU + /* + * With an MMU on the other hand, things are slightly more involved. + * Namely, we have to have a direct mapping between the SQ addr and + * the associated physical address in the UTLB by way of setting up + * a virt<->phys translation by hand. We do this by simply specifying + * the SQ addr in UTLB.VPN and the associated physical address in + * UTLB.PPN. + * + * Notably, even though this is a special case translation, and some + * of the configuration bits are meaningless, we're still required + * to have a valid ASID context in PTEH. + * + * We could also probably get by without explicitly setting PTEA, but + * we do it here just for good measure. + */ + spin_lock_irqsave(&sq_mapping_lock, flags); + + pteh = map->sq_addr; + ctrl_outl((pteh & MMU_VPN_MASK) | get_asid(), MMU_PTEH); + + ptel = map->addr & PAGE_MASK; + ctrl_outl(((ptel >> 28) & 0xe) | (ptel & 0x1), MMU_PTEA); + + pgprot = pgprot_noncached(PAGE_KERNEL); + + ptel &= _PAGE_FLAGS_HARDWARE_MASK; + ptel |= pgprot_val(pgprot); + ctrl_outl(ptel, MMU_PTEL); + + __asm__ __volatile__ ("ldtlb" : : : "memory"); + + spin_unlock_irqrestore(&sq_mapping_lock, flags); + + /* + * Next, we need to map ourselves in the kernel page table, so that + * future accesses after a TLB flush will be handled when we take a + * page fault. + * + * Theoretically we could just do this directly and not worry about + * setting up the translation by hand ahead of time, but for the + * cases where we want a one-shot SQ mapping followed by a quick + * writeout before we hit the TLB flush, we do it anyways. This way + * we at least save ourselves the initial page fault overhead. + */ + vma = __get_vm_area(map->size, VM_ALLOC, map->sq_addr, SQ_ADDRMAX); + if (!vma) + return ERR_PTR(-ENOMEM); + + vma->phys_addr = map->addr; + + if (remap_area_pages((unsigned long)vma->addr, vma->phys_addr, + map->size, pgprot_val(pgprot))) { + vunmap(vma->addr); + return NULL; + } +#endif /* CONFIG_MMU */ + + return map; +} + +/** + * sq_remap - Map a physical address through the Store Queues + * @phys: Physical address of mapping. + * @size: Length of mapping. + * @name: User invoking mapping. + * + * Remaps the physical address @phys through the next available store queue + * address of @size length. @name is logged at boot time as well as through + * the procfs interface. + * + * A pre-allocated and filled sq_mapping pointer is returned, and must be + * cleaned up with a call to sq_unmap() when the user is done with the + * mapping. + */ +struct sq_mapping *sq_remap(unsigned long phys, unsigned int size, const char *name) +{ + struct sq_mapping *map; + unsigned long virt, end; + unsigned int psz; + + /* Don't allow wraparound or zero size */ + end = phys + size - 1; + if (!size || end < phys) + return NULL; + /* Don't allow anyone to remap normal memory.. */ + if (phys < virt_to_phys(high_memory)) + return NULL; + + phys &= PAGE_MASK; + + size = PAGE_ALIGN(end + 1) - phys; + virt = __sq_get_next_addr(); + psz = (size + (PAGE_SIZE - 1)) / PAGE_SIZE; + map = __sq_alloc_mapping(virt, phys, size, name); + + printk("sqremap: %15s [%4d page%s] va 0x%08lx pa 0x%08lx\n", + map->name ? map->name : "???", + psz, psz == 1 ? " " : "s", + map->sq_addr, map->addr); + + return __sq_remap(map); +} + +/** + * sq_unmap - Unmap a Store Queue allocation + * @map: Pre-allocated Store Queue mapping. + * + * Unmaps the store queue allocation @map that was previously created by + * sq_remap(). Also frees up the pte that was previously inserted into + * the kernel page table and discards the UTLB translation. + */ +void sq_unmap(struct sq_mapping *map) +{ + if (map->sq_addr > (unsigned long)high_memory) + vfree((void *)(map->sq_addr & PAGE_MASK)); + + list_del(&map->list); + kfree(map); +} + +/** + * sq_clear - Clear a store queue range + * @addr: Address to start clearing from. + * @len: Length to clear. + * + * A quick zero-fill implementation for clearing out memory that has been + * remapped through the store queues. + */ +void sq_clear(unsigned long addr, unsigned int len) +{ + int i; + + /* Clear out both queues linearly */ + for (i = 0; i < 8; i++) { + ctrl_outl(0, addr + i + 0); + ctrl_outl(0, addr + i + 8); + } + + sq_flush_range(addr, len); +} + +/** + * sq_vma_unmap - Unmap a VMA range + * @area: VMA containing range. + * @addr: Start of range. + * @len: Length of range. + * + * Searches the sq_mapping_list for a mapping matching the sq addr @addr, + * and subsequently frees up the entry. Further cleanup is done by generic + * code. + */ +static void sq_vma_unmap(struct vm_area_struct *area, + unsigned long addr, size_t len) +{ + struct list_head *pos, *tmp; + + list_for_each_safe(pos, tmp, &sq_mapping_list) { + struct sq_mapping *entry; + + entry = list_entry(pos, typeof(*entry), list); + + if (entry->sq_addr == addr) { + /* + * We could probably get away without doing the tlb flush + * here, as generic code should take care of most of this + * when unmapping the rest of the VMA range for us. Leave + * it in for added sanity for the time being.. + */ + __flush_tlb_page(get_asid(), entry->sq_addr & PAGE_MASK); + + list_del(&entry->list); + kfree(entry); + + return; + } + } +} + +/** + * sq_vma_sync - Sync a VMA range + * @area: VMA containing range. + * @start: Start of range. + * @len: Length of range. + * @flags: Additional flags. + * + * Synchronizes an sq mapped range by flushing the store queue cache for + * the duration of the mapping. + * + * Used internally for user mappings, which must use msync() to prefetch + * the store queue cache. + */ +static int sq_vma_sync(struct vm_area_struct *area, + unsigned long start, size_t len, unsigned int flags) +{ + sq_flush_range(start, len); + + return 0; +} + +static struct vm_operations_struct sq_vma_ops = { + .unmap = sq_vma_unmap, + .sync = sq_vma_sync, +}; + +/** + * sq_mmap - mmap() for /dev/cpu/sq + * @file: unused. + * @vma: VMA to remap. + * + * Remap the specified vma @vma through the store queues, and setup associated + * information for the new mapping. Also build up the page tables for the new + * area. + */ +static int sq_mmap(struct file *file, struct vm_area_struct *vma) +{ + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + unsigned long size = vma->vm_end - vma->vm_start; + struct sq_mapping *map; + + /* + * We're not interested in any arbitrary virtual address that has + * been stuck in the VMA, as we already know what addresses we + * want. Save off the size, and reposition the VMA to begin at + * the next available sq address. + */ + vma->vm_start = __sq_get_next_addr(); + vma->vm_end = vma->vm_start + size; + + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + vma->vm_flags |= VM_IO | VM_RESERVED; + + map = __sq_alloc_mapping(vma->vm_start, offset, size, "Userspace"); + + if (io_remap_pfn_range(vma, map->sq_addr, map->addr >> PAGE_SHIFT, + size, vma->vm_page_prot)) + return -EAGAIN; + + vma->vm_ops = &sq_vma_ops; + + return 0; +} + +#ifdef CONFIG_PROC_FS +static int sq_mapping_read_proc(char *buf, char **start, off_t off, + int len, int *eof, void *data) +{ + struct list_head *pos; + char *p = buf; + + list_for_each_prev(pos, &sq_mapping_list) { + struct sq_mapping *entry; + + entry = list_entry(pos, typeof(*entry), list); + + p += sprintf(p, "%08lx-%08lx [%08lx]: %s\n", entry->sq_addr, + entry->sq_addr + entry->size - 1, entry->addr, + entry->name); + } + + return p - buf; +} +#endif + +static struct file_operations sq_fops = { + .owner = THIS_MODULE, + .mmap = sq_mmap, +}; + +static struct miscdevice sq_dev = { + .minor = STORE_QUEUE_MINOR, + .name = "sq", + .devfs_name = "cpu/sq", + .fops = &sq_fops, +}; + +static int __init sq_api_init(void) +{ + printk(KERN_NOTICE "sq: Registering store queue API.\n"); + +#ifdef CONFIG_PROC_FS + create_proc_read_entry("sq_mapping", 0, 0, sq_mapping_read_proc, 0); +#endif + + return misc_register(&sq_dev); +} + +static void __exit sq_api_exit(void) +{ + misc_deregister(&sq_dev); +} + +module_init(sq_api_init); +module_exit(sq_api_exit); + +MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, M. R. Brown <mrbrown@0xd6.org>"); +MODULE_DESCRIPTION("Simple API for SH-4 integrated Store Queues"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(STORE_QUEUE_MINOR); + +EXPORT_SYMBOL(sq_remap); +EXPORT_SYMBOL(sq_unmap); +EXPORT_SYMBOL(sq_clear); +EXPORT_SYMBOL(sq_flush); +EXPORT_SYMBOL(sq_flush_range); + diff --git a/arch/sh/kernel/cpu/ubc.S b/arch/sh/kernel/cpu/ubc.S new file mode 100644 index 00000000000..0c569b20e1c --- /dev/null +++ b/arch/sh/kernel/cpu/ubc.S @@ -0,0 +1,59 @@ +/* + * arch/sh/kernel/ubc.S + * + * Set of management routines for the User Break Controller (UBC) + * + * Copyright (C) 2002 Paul Mundt + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/linkage.h> +#include <asm/ubc.h> + +#define STBCR2 0xffc00010 + +ENTRY(ubc_sleep) + mov #0, r0 + + mov.l 1f, r1 ! Zero out UBC_BBRA .. + mov.w r0, @r1 + + mov.l 2f, r1 ! .. same for BBRB .. + mov.w r0, @r1 + + mov.l 3f, r1 ! .. and again for BRCR. + mov.w r0, @r1 + + mov.w @r1, r0 ! Dummy read BRCR + + mov.l 4f, r1 ! Set MSTP5 in STBCR2 + mov.b @r1, r0 + or #0x01, r0 + mov.b r0, @r1 + + mov.b @r1, r0 ! Two dummy reads .. + mov.b @r1, r0 + + rts + nop + +ENTRY(ubc_wakeup) + mov.l 4f, r1 ! Clear MSTP5 + mov.b @r1, r0 + and #0xfe, r0 + mov.b r0, @r1 + + mov.b @r1, r0 ! Two more dummy reads .. + mov.b @r1, r0 + + rts + nop + +1: .long UBC_BBRA +2: .long UBC_BBRB +3: .long UBC_BRCR +4: .long STBCR2 + diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c new file mode 100644 index 00000000000..e0b384bef55 --- /dev/null +++ b/arch/sh/kernel/cpufreq.c @@ -0,0 +1,218 @@ +/* + * arch/sh/kernel/cpufreq.c + * + * cpufreq driver for the SuperH processors. + * + * Copyright (C) 2002, 2003, 2004, 2005 Paul Mundt + * Copyright (C) 2002 M. R. Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/types.h> +#include <linux/cpufreq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/cpumask.h> +#include <linux/smp.h> + +#include <asm/processor.h> +#include <asm/watchdog.h> +#include <asm/freq.h> +#include <asm/io.h> + +/* + * For SuperH, each policy change requires that we change the IFC, BFC, and + * PFC at the same time. Here we define sane values that won't trash the + * system. + * + * Note the max set is computed at runtime, we use the divisors that we booted + * with to setup our maximum operating frequencies. + */ +struct clock_set { + unsigned int ifc; + unsigned int bfc; + unsigned int pfc; +} clock_sets[] = { +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH2) + { 0, 0, 0 }, /* not implemented yet */ +#elif defined(CONFIG_CPU_SH4) + { 4, 8, 8 }, /* min - IFC: 1/4, BFC: 1/8, PFC: 1/8 */ + { 1, 2, 2 }, /* max - IFC: 1, BFC: 1/2, PFC: 1/2 */ +#endif +}; + +#define MIN_CLOCK_SET 0 +#define MAX_CLOCK_SET (ARRAY_SIZE(clock_sets) - 1) + +/* + * For the time being, we only support two frequencies, which in turn are + * aimed at the POWERSAVE and PERFORMANCE policies, which in turn are derived + * directly from the respective min/max clock sets. Technically we could + * support a wider range of frequencies, but these vary far too much for each + * CPU subtype (and we'd have to construct a frequency table for each subtype). + * + * Maybe something to implement in the future.. + */ +#define SH_FREQ_MAX 0 +#define SH_FREQ_MIN 1 + +static struct cpufreq_frequency_table sh_freqs[] = { + { SH_FREQ_MAX, 0 }, + { SH_FREQ_MIN, 0 }, + { 0, CPUFREQ_TABLE_END }, +}; + +static void sh_cpufreq_update_clocks(unsigned int set) +{ + current_cpu_data.cpu_clock = current_cpu_data.master_clock / clock_sets[set].ifc; + current_cpu_data.bus_clock = current_cpu_data.master_clock / clock_sets[set].bfc; + current_cpu_data.module_clock = current_cpu_data.master_clock / clock_sets[set].pfc; + current_cpu_data.loops_per_jiffy = loops_per_jiffy; +} + +/* XXX: This needs to be split out per CPU and CPU subtype. */ +/* + * Here we notify other drivers of the proposed change and the final change. + */ +static int sh_cpufreq_setstate(unsigned int cpu, unsigned int set) +{ + unsigned short frqcr = ctrl_inw(FRQCR); + cpumask_t cpus_allowed; + struct cpufreq_freqs freqs; + + if (!cpu_online(cpu)) + return -ENODEV; + + cpus_allowed = current->cpus_allowed; + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + + BUG_ON(smp_processor_id() != cpu); + + freqs.cpu = cpu; + freqs.old = current_cpu_data.cpu_clock / 1000; + freqs.new = (current_cpu_data.master_clock / clock_sets[set].ifc) / 1000; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); +#if defined(CONFIG_CPU_SH3) + frqcr |= (newstate & 0x4000) << 14; + frqcr |= (newstate & 0x000c) << 2; +#elif defined(CONFIG_CPU_SH4) + /* + * FRQCR.PLL2EN is 1, we need to allow the PLL to stabilize by + * initializing the WDT. + */ + if (frqcr & (1 << 9)) { + __u8 csr; + + /* + * Set the overflow period to the highest available, + * in this case a 1/4096 division ratio yields a 5.25ms + * overflow period. See asm-sh/watchdog.h for more + * information and a range of other divisors. + */ + csr = sh_wdt_read_csr(); + csr |= WTCSR_CKS_4096; + sh_wdt_write_csr(csr); + + sh_wdt_write_cnt(0); + } + frqcr &= 0x0e00; /* Clear ifc, bfc, pfc */ + frqcr |= get_ifc_value(clock_sets[set].ifc) << 6; + frqcr |= get_bfc_value(clock_sets[set].bfc) << 3; + frqcr |= get_pfc_value(clock_sets[set].pfc); +#endif + ctrl_outw(frqcr, FRQCR); + sh_cpufreq_update_clocks(set); + + set_cpus_allowed(current, cpus_allowed); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int min_freq, max_freq; + unsigned int ifc, bfc, pfc; + + if (!cpu_online(policy->cpu)) + return -ENODEV; + + /* Update our maximum clock set */ + get_current_frequency_divisors(&ifc, &bfc, &pfc); + clock_sets[MAX_CLOCK_SET].ifc = ifc; + clock_sets[MAX_CLOCK_SET].bfc = bfc; + clock_sets[MAX_CLOCK_SET].pfc = pfc; + + /* Convert from Hz to kHz */ + max_freq = current_cpu_data.cpu_clock / 1000; + min_freq = (current_cpu_data.master_clock / clock_sets[MIN_CLOCK_SET].ifc) / 1000; + + sh_freqs[SH_FREQ_MAX].frequency = max_freq; + sh_freqs[SH_FREQ_MIN].frequency = min_freq; + + /* cpuinfo and default policy values */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = max_freq; + + return cpufreq_frequency_table_cpuinfo(policy, &sh_freqs[0]); +} + +static int sh_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &sh_freqs[0]); +} + +static int sh_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int set, idx = 0; + + if (cpufreq_frequency_table_target(policy, &sh_freqs[0], target_freq, relation, &idx)) + return -EINVAL; + + set = (idx == SH_FREQ_MIN) ? MIN_CLOCK_SET : MAX_CLOCK_SET; + + sh_cpufreq_setstate(policy->cpu, set); + + return 0; +} + +static struct cpufreq_driver sh_cpufreq_driver = { + .owner = THIS_MODULE, + .name = "SH cpufreq", + .init = sh_cpufreq_cpu_init, + .verify = sh_cpufreq_verify, + .target = sh_cpufreq_target, +}; + +static int __init sh_cpufreq_init(void) +{ + if (!current_cpu_data.cpu_clock) + return -EINVAL; + if (cpufreq_register_driver(&sh_cpufreq_driver)) + return -EINVAL; + + return 0; +} + +static void __exit sh_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&sh_cpufreq_driver); +} + +module_init(sh_cpufreq_init); +module_exit(sh_cpufreq_exit); + +MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); +MODULE_DESCRIPTION("cpufreq driver for SuperH"); +MODULE_LICENSE("GPL"); + diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c new file mode 100644 index 00000000000..1378db375e1 --- /dev/null +++ b/arch/sh/kernel/early_printk.c @@ -0,0 +1,137 @@ +/* + * arch/sh/kernel/early_printk.c + * + * Copyright (C) 1999, 2000 Niibe Yutaka + * Copyright (C) 2002 M. R. Brown + * Copyright (C) 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/console.h> +#include <linux/tty.h> +#include <linux/init.h> +#include <asm/io.h> + +#ifdef CONFIG_SH_STANDARD_BIOS +#include <asm/sh_bios.h> + +/* + * Print a string through the BIOS + */ +static void sh_console_write(struct console *co, const char *s, + unsigned count) +{ + sh_bios_console_write(s, count); +} + +/* + * Setup initial baud/bits/parity. We do two things here: + * - construct a cflag setting for the first rs_open() + * - initialize the serial port + * Return non-zero if we didn't find a serial port. + */ +static int __init sh_console_setup(struct console *co, char *options) +{ + int cflag = CREAD | HUPCL | CLOCAL; + + /* + * Now construct a cflag setting. + * TODO: this is a totally bogus cflag, as we have + * no idea what serial settings the BIOS is using, or + * even if its using the serial port at all. + */ + cflag |= B115200 | CS8 | /*no parity*/0; + + co->cflag = cflag; + + return 0; +} + +static struct console early_console = { + .name = "bios", + .write = sh_console_write, + .setup = sh_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; +#endif + +#ifdef CONFIG_EARLY_SCIF_CONSOLE +#define SCIF_REG 0xffe80000 + +static void scif_sercon_putc(int c) +{ + while (!(ctrl_inw(SCIF_REG + 0x10) & 0x20)) ; + + ctrl_outb(c, SCIF_REG + 12); + ctrl_outw((ctrl_inw(SCIF_REG + 0x10) & 0x9f), SCIF_REG + 0x10); + + if (c == '\n') + scif_sercon_putc('\r'); +} + +static void scif_sercon_flush(void) +{ + ctrl_outw((ctrl_inw(SCIF_REG + 0x10) & 0xbf), SCIF_REG + 0x10); + + while (!(ctrl_inw(SCIF_REG + 0x10) & 0x40)) ; + + ctrl_outw((ctrl_inw(SCIF_REG + 0x10) & 0xbf), SCIF_REG + 0x10); +} + +static void scif_sercon_write(struct console *con, const char *s, unsigned count) +{ + while (count-- > 0) + scif_sercon_putc(*s++); + + scif_sercon_flush(); +} + +static int __init scif_sercon_setup(struct console *con, char *options) +{ + con->cflag = CREAD | HUPCL | CLOCAL | B115200 | CS8; + + return 0; +} + +static struct console early_console = { + .name = "sercon", + .write = scif_sercon_write, + .setup = scif_sercon_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +void scif_sercon_init(int baud) +{ + ctrl_outw(0, SCIF_REG + 8); + ctrl_outw(0, SCIF_REG); + + /* Set baud rate */ + ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) / + (32 * baud) - 1, SCIF_REG + 4); + + ctrl_outw(12, SCIF_REG + 24); + ctrl_outw(8, SCIF_REG + 24); + ctrl_outw(0, SCIF_REG + 32); + ctrl_outw(0x60, SCIF_REG + 16); + ctrl_outw(0, SCIF_REG + 36); + ctrl_outw(0x30, SCIF_REG + 8); +} +#endif + +void __init enable_early_printk(void) +{ +#ifdef CONFIG_EARLY_SCIF_CONSOLE + scif_sercon_init(115200); +#endif + register_console(&early_console); +} + +void disable_early_printk(void) +{ + unregister_console(&early_console); +} + diff --git a/arch/sh/kernel/entry.S b/arch/sh/kernel/entry.S new file mode 100644 index 00000000000..6615e4838ee --- /dev/null +++ b/arch/sh/kernel/entry.S @@ -0,0 +1,1149 @@ +/* $Id: entry.S,v 1.37 2004/06/11 13:02:46 doyu Exp $ + * + * linux/arch/sh/entry.S + * + * Copyright (C) 1999, 2000, 2002 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#include <linux/sys.h> +#include <linux/linkage.h> +#include <linux/config.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/unistd.h> + +#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE) +#define sys_nfsservctl sys_ni_syscall +#endif + +#if !defined(CONFIG_MMU) +#define sys_madvise sys_ni_syscall +#define sys_readahead sys_ni_syscall +#define sys_mprotect sys_ni_syscall +#define sys_msync sys_ni_syscall +#define sys_mlock sys_ni_syscall +#define sys_munlock sys_ni_syscall +#define sys_mlockall sys_ni_syscall +#define sys_munlockall sys_ni_syscall +#define sys_mremap sys_ni_syscall +#define sys_mincore sys_ni_syscall +#define sys_remap_file_pages sys_ni_syscall +#endif + +! NOTE: +! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address +! to be jumped is too far, but it causes illegal slot exception. + +/* + * entry.S contains the system-call and fault low-level handling routines. + * This also contains the timer-interrupt handler, as well as all interrupts + * and faults that can result in a task-switch. + * + * NOTE: This code handles signal-recognition, which happens every time + * after a timer-interrupt and after each system call. + * + * NOTE: This code uses a convention that instructions in the delay slot + * of a transfer-control instruction are indented by an extra space, thus: + * + * jmp @k0 ! control-transfer instruction + * ldc k1, ssr ! delay slot + * + * Stack layout in 'ret_from_syscall': + * ptrace needs to have all regs on the stack. + * if the order here is changed, it needs to be + * updated in ptrace.c and ptrace.h + * + * r0 + * ... + * r15 = stack pointer + * spc + * pr + * ssr + * gbr + * mach + * macl + * syscall # + * + */ + +ENOSYS = 38 +EINVAL = 22 + +#if defined(CONFIG_CPU_SH3) +TRA = 0xffffffd0 +EXPEVT = 0xffffffd4 +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) +INTEVT = 0xa4000000 ! INTEVTE2(0xa4000000) +#else +INTEVT = 0xffffffd8 +#endif +MMU_TEA = 0xfffffffc ! TLB Exception Address Register +#elif defined(CONFIG_CPU_SH4) +TRA = 0xff000020 +EXPEVT = 0xff000024 +INTEVT = 0xff000028 +MMU_TEA = 0xff00000c ! TLB Exception Address Register +#endif + +#if defined(CONFIG_KGDB_NMI) +NMI_VEC = 0x1c0 ! Must catch early for debounce +#endif + +/* Offsets to the stack */ +OFF_R0 = 0 /* Return value. New ABI also arg4 */ +OFF_R1 = 4 /* New ABI: arg5 */ +OFF_R2 = 8 /* New ABI: arg6 */ +OFF_R3 = 12 /* New ABI: syscall_nr */ +OFF_R4 = 16 /* New ABI: arg0 */ +OFF_R5 = 20 /* New ABI: arg1 */ +OFF_R6 = 24 /* New ABI: arg2 */ +OFF_R7 = 28 /* New ABI: arg3 */ +OFF_SP = (15*4) +OFF_PC = (16*4) +OFF_SR = (16*4+8) +OFF_TRA = (16*4+6*4) + + +#define k0 r0 +#define k1 r1 +#define k2 r2 +#define k3 r3 +#define k4 r4 + +#define k_ex_code r2_bank /* r2_bank1 */ +#define g_imask r6 /* r6_bank1 */ +#define k_g_imask r6_bank /* r6_bank1 */ +#define current r7 /* r7_bank1 */ + +/* + * Kernel mode register usage: + * k0 scratch + * k1 scratch + * k2 scratch (Exception code) + * k3 scratch (Return address) + * k4 scratch + * k5 reserved + * k6 Global Interrupt Mask (0--15 << 4) + * k7 CURRENT_THREAD_INFO (pointer to current thread info) + */ + +! +! TLB Miss / Initial Page write exception handling +! _and_ +! TLB hits, but the access violate the protection. +! It can be valid access, such as stack grow and/or C-O-W. +! +! +! Find the pmd/pte entry and loadtlb +! If it's not found, cause address error (SEGV) +! +! Although this could be written in assembly language (and it'd be faster), +! this first version depends *much* on C implementation. +! + +#define CLI() \ + stc sr, r0; \ + or #0xf0, r0; \ + ldc r0, sr + +#define STI() \ + mov.l __INV_IMASK, r11; \ + stc sr, r10; \ + and r11, r10; \ + stc k_g_imask, r11; \ + or r11, r10; \ + ldc r10, sr + +#if defined(CONFIG_PREEMPT) +# define preempt_stop() CLI() +#else +# define preempt_stop() +# define resume_kernel restore_all +#endif + +#if defined(CONFIG_MMU) + .align 2 +ENTRY(tlb_miss_load) + bra call_dpf + mov #0, r5 + + .align 2 +ENTRY(tlb_miss_store) + bra call_dpf + mov #1, r5 + + .align 2 +ENTRY(initial_page_write) + bra call_dpf + mov #1, r5 + + .align 2 +ENTRY(tlb_protection_violation_load) + bra call_dpf + mov #0, r5 + + .align 2 +ENTRY(tlb_protection_violation_store) + bra call_dpf + mov #1, r5 + +call_dpf: + mov.l 1f, r0 + mov r5, r8 + mov.l @r0, r6 + mov r6, r9 + mov.l 2f, r0 + sts pr, r10 + jsr @r0 + mov r15, r4 + ! + tst r0, r0 + bf/s 0f + lds r10, pr + rts + nop +0: STI() + mov.l 3f, r0 + mov r9, r6 + mov r8, r5 + jmp @r0 + mov r15, r4 + + .align 2 +1: .long MMU_TEA +2: .long __do_page_fault +3: .long do_page_fault + + .align 2 +ENTRY(address_error_load) + bra call_dae + mov #0,r5 ! writeaccess = 0 + + .align 2 +ENTRY(address_error_store) + bra call_dae + mov #1,r5 ! writeaccess = 1 + + .align 2 +call_dae: + mov.l 1f, r0 + mov.l @r0, r6 ! address + mov.l 2f, r0 + jmp @r0 + mov r15, r4 ! regs + + .align 2 +1: .long MMU_TEA +2: .long do_address_error +#endif /* CONFIG_MMU */ + +#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) +! Handle kernel debug if either kgdb (SW) or gdb-stub (FW) is present. +! If both are configured, handle the debug traps (breakpoints) in SW, +! but still allow BIOS traps to FW. + + .align 2 +debug_kernel: +#if defined(CONFIG_SH_STANDARD_BIOS) && defined(CONFIG_SH_KGDB) + /* Force BIOS call to FW (debug_trap put TRA in r8) */ + mov r8,r0 + shlr2 r0 + cmp/eq #0x3f,r0 + bt debug_kernel_fw +#endif /* CONFIG_SH_STANDARD_BIOS && CONFIG_SH_KGDB */ + +debug_enter: +#if defined(CONFIG_SH_KGDB) + /* Jump to kgdb, pass stacked regs as arg */ +debug_kernel_sw: + mov.l 3f, r0 + jmp @r0 + mov r15, r4 + .align 2 +3: .long kgdb_handle_exception +#endif /* CONFIG_SH_KGDB */ + +#if defined(CONFIG_SH_STANDARD_BIOS) + /* Unwind the stack and jmp to the debug entry */ +debug_kernel_fw: + mov.l @r15+, r0 + mov.l @r15+, r1 + mov.l @r15+, r2 + mov.l @r15+, r3 + mov.l @r15+, r4 + mov.l @r15+, r5 + mov.l @r15+, r6 + mov.l @r15+, r7 + stc sr, r8 + mov.l 1f, r9 ! BL =1, RB=1, IMASK=0x0F + or r9, r8 + ldc r8, sr ! here, change the register bank + mov.l @r15+, r8 + mov.l @r15+, r9 + mov.l @r15+, r10 + mov.l @r15+, r11 + mov.l @r15+, r12 + mov.l @r15+, r13 + mov.l @r15+, r14 + mov.l @r15+, k0 + ldc.l @r15+, spc + lds.l @r15+, pr + mov.l @r15+, k1 + ldc.l @r15+, gbr + lds.l @r15+, mach + lds.l @r15+, macl + mov k0, r15 + ! + mov.l 2f, k0 + mov.l @k0, k0 + jmp @k0 + ldc k1, ssr + .align 2 +1: .long 0x300000f0 +2: .long gdb_vbr_vector +#endif /* CONFIG_SH_STANDARD_BIOS */ + +#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ + + + .align 2 +debug_trap: +#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) + mov #OFF_SR, r0 + mov.l @(r0,r15), r0 ! get status register + shll r0 + shll r0 ! kernel space? + bt/s debug_kernel +#endif + mov.l @r15, r0 ! Restore R0 value + mov.l 1f, r8 + jmp @r8 + nop + + .align 2 +ENTRY(exception_error) + ! + STI() + mov.l 2f, r0 + jmp @r0 + nop + +! + .align 2 +1: .long break_point_trap_software +2: .long do_exception_error + + .align 2 +ret_from_exception: + preempt_stop() +ret_from_irq: + ! + mov #OFF_SR, r0 + mov.l @(r0,r15), r0 ! get status register + shll r0 + shll r0 ! kernel space? + bt/s resume_kernel ! Yes, it's from kernel, go back soon + GET_THREAD_INFO(r8) + +#ifdef CONFIG_PREEMPT + bra resume_userspace + nop +ENTRY(resume_kernel) + mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count + tst r0, r0 + bf noresched +need_resched: + mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags + tst #_TIF_NEED_RESCHED, r0 ! need_resched set? + bt noresched + + mov #OFF_SR, r0 + mov.l @(r0,r15), r0 ! get status register + and #0xf0, r0 ! interrupts off (exception path)? + cmp/eq #0xf0, r0 + bt noresched + + mov.l 1f, r0 + mov.l r0, @(TI_PRE_COUNT,r8) + + STI() + mov.l 2f, r0 + jsr @r0 + nop + mov #0, r0 + mov.l r0, @(TI_PRE_COUNT,r8) + CLI() + + bra need_resched + nop +noresched: + bra restore_all + nop + + .align 2 +1: .long PREEMPT_ACTIVE +2: .long schedule +#endif + +ENTRY(resume_userspace) + ! r8: current_thread_info + CLI() + mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags + tst #_TIF_WORK_MASK, r0 + bt/s restore_all + tst #_TIF_NEED_RESCHED, r0 + + .align 2 +work_pending: + ! r0: current_thread_info->flags + ! r8: current_thread_info + ! t: result of "tst #_TIF_NEED_RESCHED, r0" + bf/s work_resched + tst #_TIF_SIGPENDING, r0 +work_notifysig: + bt/s restore_all + mov r15, r4 + mov #0, r5 + mov.l 2f, r1 + mova restore_all, r0 + jmp @r1 + lds r0, pr +work_resched: +#ifndef CONFIG_PREEMPT + ! gUSA handling + mov.l @(OFF_SP,r15), r0 ! get user space stack pointer + mov r0, r1 + shll r0 + bf/s 1f + shll r0 + bf/s 1f + mov #OFF_PC, r0 + ! SP >= 0xc0000000 : gUSA mark + mov.l @(r0,r15), r2 ! get user space PC (program counter) + mov.l @(OFF_R0,r15), r3 ! end point + cmp/hs r3, r2 ! r2 >= r3? + bt 1f + add r3, r1 ! rewind point #2 + mov.l r1, @(r0,r15) ! reset PC to rewind point #2 + ! +1: +#endif + mov.l 1f, r1 + jsr @r1 ! schedule + nop + CLI() + ! + mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags + tst #_TIF_WORK_MASK, r0 + bt restore_all + bra work_pending + tst #_TIF_NEED_RESCHED, r0 + + .align 2 +1: .long schedule +2: .long do_signal + + .align 2 +syscall_exit_work: + ! r0: current_thread_info->flags + ! r8: current_thread_info + tst #_TIF_SYSCALL_TRACE, r0 + bt/s work_pending + tst #_TIF_NEED_RESCHED, r0 + STI() + ! XXX setup arguments... + mov.l 4f, r0 ! do_syscall_trace + jsr @r0 + nop + bra resume_userspace + nop + + .align 2 +syscall_trace_entry: + ! Yes it is traced. + ! XXX setup arguments... + mov.l 4f, r11 ! Call do_syscall_trace which notifies + jsr @r11 ! superior (will chomp R[0-7]) + nop + ! Reload R0-R4 from kernel stack, where the + ! parent may have modified them using + ! ptrace(POKEUSR). (Note that R0-R2 are + ! used by the system call handler directly + ! from the kernel stack anyway, so don't need + ! to be reloaded here.) This allows the parent + ! to rewrite system calls and args on the fly. + mov.l @(OFF_R4,r15), r4 ! arg0 + mov.l @(OFF_R5,r15), r5 + mov.l @(OFF_R6,r15), r6 + mov.l @(OFF_R7,r15), r7 ! arg3 + mov.l @(OFF_R3,r15), r3 ! syscall_nr + ! Arrange for do_syscall_trace to be called + ! again as the system call returns. + mov.l 2f, r10 ! Number of syscalls + cmp/hs r10, r3 + bf syscall_call + mov #-ENOSYS, r0 + bra syscall_exit + mov.l r0, @(OFF_R0,r15) ! Return value + +/* + * Syscall interface: + * + * Syscall #: R3 + * Arguments #0 to #3: R4--R7 + * Arguments #4 to #6: R0, R1, R2 + * TRA: (number of arguments + 0x10) x 4 + * + * This code also handles delegating other traps to the BIOS/gdb stub + * according to: + * + * Trap number + * (TRA>>2) Purpose + * -------- ------- + * 0x0-0xf old syscall ABI + * 0x10-0x1f new syscall ABI + * 0x20-0xff delegated through debug_trap to BIOS/gdb stub. + * + * Note: When we're first called, the TRA value must be shifted + * right 2 bits in order to get the value that was used as the "trapa" + * argument. + */ + + .align 2 + .globl ret_from_fork +ret_from_fork: + mov.l 1f, r8 + jsr @r8 + mov r0, r4 + bra syscall_exit + nop + .align 2 +1: .long schedule_tail + ! +ENTRY(system_call) + mov.l 1f, r9 + mov.l @r9, r8 ! Read from TRA (Trap Address) Register + ! + ! Is the trap argument >= 0x20? (TRA will be >= 0x80) + mov #0x7f, r9 + cmp/hi r9, r8 + bt/s 0f + mov #OFF_TRA, r9 + add r15, r9 + ! + mov.l r8, @r9 ! set TRA value to tra + STI() + ! Call the system call handler through the table. + ! First check for bad syscall number + mov r3, r9 + mov.l 2f, r8 ! Number of syscalls + cmp/hs r8, r9 + bf/s good_system_call + GET_THREAD_INFO(r8) +syscall_badsys: ! Bad syscall number + mov #-ENOSYS, r0 + bra resume_userspace + mov.l r0, @(OFF_R0,r15) ! Return value + ! +0: + bra debug_trap + nop + ! +good_system_call: ! Good syscall number + mov.l @(TI_FLAGS,r8), r8 + mov #_TIF_SYSCALL_TRACE, r10 + tst r10, r8 + bf syscall_trace_entry + ! +syscall_call: + shll2 r9 ! x4 + mov.l 3f, r8 ! Load the address of sys_call_table + add r8, r9 + mov.l @r9, r8 + jsr @r8 ! jump to specific syscall handler + nop + mov.l r0, @(OFF_R0,r15) ! save the return value + ! +syscall_exit: + CLI() + ! + GET_THREAD_INFO(r8) + mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags + tst #_TIF_ALLWORK_MASK, r0 + bf syscall_exit_work +restore_all: + mov.l @r15+, r0 + mov.l @r15+, r1 + mov.l @r15+, r2 + mov.l @r15+, r3 + mov.l @r15+, r4 + mov.l @r15+, r5 + mov.l @r15+, r6 + mov.l @r15+, r7 + ! + stc sr, r8 + mov.l 7f, r9 + or r9, r8 ! BL =1, RB=1 + ldc r8, sr ! here, change the register bank + ! + mov.l @r15+, r8 + mov.l @r15+, r9 + mov.l @r15+, r10 + mov.l @r15+, r11 + mov.l @r15+, r12 + mov.l @r15+, r13 + mov.l @r15+, r14 + mov.l @r15+, k4 ! original stack pointer + ldc.l @r15+, spc + lds.l @r15+, pr + mov.l @r15+, k3 ! original SR + ldc.l @r15+, gbr + lds.l @r15+, mach + lds.l @r15+, macl + add #4, r15 ! Skip syscall number + ! +#ifdef CONFIG_SH_DSP + mov.l @r15+, k0 ! DSP mode marker + mov.l 5f, k1 + cmp/eq k0, k1 ! Do we have a DSP stack frame? + bf skip_restore + + stc sr, k0 ! Enable CPU DSP mode + or k1, k0 ! (within kernel it may be disabled) + ldc k0, sr + mov r2, k0 ! Backup r2 + + ! Restore DSP registers from stack + mov r15, r2 + movs.l @r2+, a1 + movs.l @r2+, a0g + movs.l @r2+, a1g + movs.l @r2+, m0 + movs.l @r2+, m1 + mov r2, r15 + + lds.l @r15+, a0 + lds.l @r15+, x0 + lds.l @r15+, x1 + lds.l @r15+, y0 + lds.l @r15+, y1 + lds.l @r15+, dsr + ldc.l @r15+, rs + ldc.l @r15+, re + ldc.l @r15+, mod + + mov k0, r2 ! Restore r2 +skip_restore: +#endif + ! + ! Calculate new SR value + mov k3, k2 ! original SR value + mov.l 9f, k1 + and k1, k2 ! Mask orignal SR value + ! + mov k3, k0 ! Calculate IMASK-bits + shlr2 k0 + and #0x3c, k0 + cmp/eq #0x3c, k0 + bt/s 6f + shll2 k0 + mov g_imask, k0 + ! +6: or k0, k2 ! Set the IMASK-bits + ldc k2, ssr + ! +#if defined(CONFIG_KGDB_NMI) + ! Clear in_nmi + mov.l 4f, k0 + mov #0, k1 + mov.b k1, @k0 +#endif + mov.l @r15+, k2 ! restore EXPEVT + mov k4, r15 + rte + nop + + .align 2 +1: .long TRA +2: .long NR_syscalls +3: .long sys_call_table +4: .long do_syscall_trace +5: .long 0x00001000 ! DSP +7: .long 0x30000000 +9: +__INV_IMASK: + .long 0xffffff0f ! ~(IMASK) + +! Exception Vector Base +! +! Should be aligned page boundary. +! + .balign 4096,0,4096 +ENTRY(vbr_base) + .long 0 +! + .balign 256,0,256 +general_exception: + mov.l 1f, k2 + mov.l 2f, k3 + bra handle_exception + mov.l @k2, k2 + .align 2 +1: .long EXPEVT +2: .long ret_from_exception +! +! + .balign 1024,0,1024 +tlb_miss: + mov.l 1f, k2 + mov.l 4f, k3 + bra handle_exception + mov.l @k2, k2 +! + .balign 512,0,512 +interrupt: + mov.l 2f, k2 + mov.l 3f, k3 +#if defined(CONFIG_KGDB_NMI) + ! Debounce (filter nested NMI) + mov.l @k2, k0 + mov.l 5f, k1 + cmp/eq k1, k0 + bf 0f + mov.l 6f, k1 + tas.b @k1 + bt 0f + rte + nop + .align 2 +5: .long NMI_VEC +6: .long in_nmi +0: +#endif /* defined(CONFIG_KGDB_NMI) */ + bra handle_exception + mov.l @k2, k2 + + .align 2 +1: .long EXPEVT +2: .long INTEVT +3: .long ret_from_irq +4: .long ret_from_exception + +! +! + .align 2 +handle_exception: + ! Using k0, k1 for scratch registers (r0_bank1, r1_bank), + ! save all registers onto stack. + ! + stc ssr, k0 ! Is it from kernel space? + shll k0 ! Check MD bit (bit30) by shifting it into... + shll k0 ! ...the T bit + bt/s 1f ! It's a kernel to kernel transition. + mov r15, k0 ! save original stack to k0 + /* User space to kernel */ + mov #0x20, k1 + shll8 k1 ! k1 := 8192 (== THREAD_SIZE) + add current, k1 + mov k1, r15 ! change to kernel stack + ! +1: mov #-1, k4 + mov.l 2f, k1 + ! +#ifdef CONFIG_SH_DSP + mov.l r2, @-r15 ! Save r2, we need another reg + stc sr, k4 + mov.l 1f, r2 + tst r2, k4 ! Check if in DSP mode + mov.l @r15+, r2 ! Restore r2 now + bt/s skip_save + mov #0, k4 ! Set marker for no stack frame + + mov r2, k4 ! Backup r2 (in k4) for later + + ! Save DSP registers on stack + stc.l mod, @-r15 + stc.l re, @-r15 + stc.l rs, @-r15 + sts.l dsr, @-r15 + sts.l y1, @-r15 + sts.l y0, @-r15 + sts.l x1, @-r15 + sts.l x0, @-r15 + sts.l a0, @-r15 + + ! GAS is broken, does not generate correct "movs.l Ds,@-As" instr. + + ! FIXME: Make sure that this is still the case with newer toolchains, + ! as we're not at all interested in supporting ancient toolchains at + ! this point. -- PFM. + + mov r15, r2 + .word 0xf653 ! movs.l a1, @-r2 + .word 0xf6f3 ! movs.l a0g, @-r2 + .word 0xf6d3 ! movs.l a1g, @-r2 + .word 0xf6c3 ! movs.l m0, @-r2 + .word 0xf6e3 ! movs.l m1, @-r2 + mov r2, r15 + + mov k4, r2 ! Restore r2 + mov.l 1f, k4 ! Force DSP stack frame +skip_save: + mov.l k4, @-r15 ! Push DSP mode marker onto stack +#endif + ! Save the user registers on the stack. + mov.l k2, @-r15 ! EXPEVT + mov.l k4, @-r15 ! set TRA (default: -1) + ! + sts.l macl, @-r15 + sts.l mach, @-r15 + stc.l gbr, @-r15 + stc.l ssr, @-r15 + sts.l pr, @-r15 + stc.l spc, @-r15 + ! + lds k3, pr ! Set the return address to pr + ! + mov.l k0, @-r15 ! save orignal stack + mov.l r14, @-r15 + mov.l r13, @-r15 + mov.l r12, @-r15 + mov.l r11, @-r15 + mov.l r10, @-r15 + mov.l r9, @-r15 + mov.l r8, @-r15 + ! + stc sr, r8 ! Back to normal register bank, and + or k1, r8 ! Block all interrupts + mov.l 3f, k1 + and k1, r8 ! ... + ldc r8, sr ! ...changed here. + ! + mov.l r7, @-r15 + mov.l r6, @-r15 + mov.l r5, @-r15 + mov.l r4, @-r15 + mov.l r3, @-r15 + mov.l r2, @-r15 + mov.l r1, @-r15 + mov.l r0, @-r15 + ! Then, dispatch to the handler, according to the exception code. + stc k_ex_code, r8 + shlr2 r8 + shlr r8 + mov.l 4f, r9 + add r8, r9 + mov.l @r9, r9 + jmp @r9 + nop + + .align 2 +1: .long 0x00001000 ! DSP=1 +2: .long 0x000080f0 ! FD=1, IMASK=15 +3: .long 0xcfffffff ! RB=0, BL=0 +4: .long exception_handling_table + + .align 2 +ENTRY(exception_none) + rts + nop + + .data +ENTRY(sys_call_table) + .long sys_ni_syscall /* 0 - old "setup()" system call*/ + .long sys_exit + .long sys_fork + .long sys_read + .long sys_write + .long sys_open /* 5 */ + .long sys_close + .long sys_waitpid + .long sys_creat + .long sys_link + .long sys_unlink /* 10 */ + .long sys_execve + .long sys_chdir + .long sys_time + .long sys_mknod + .long sys_chmod /* 15 */ + .long sys_lchown16 + .long sys_ni_syscall /* old break syscall holder */ + .long sys_stat + .long sys_lseek + .long sys_getpid /* 20 */ + .long sys_mount + .long sys_oldumount + .long sys_setuid16 + .long sys_getuid16 + .long sys_stime /* 25 */ + .long sys_ptrace + .long sys_alarm + .long sys_fstat + .long sys_pause + .long sys_utime /* 30 */ + .long sys_ni_syscall /* old stty syscall holder */ + .long sys_ni_syscall /* old gtty syscall holder */ + .long sys_access + .long sys_nice + .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ + .long sys_sync + .long sys_kill + .long sys_rename + .long sys_mkdir + .long sys_rmdir /* 40 */ + .long sys_dup + .long sys_pipe + .long sys_times + .long sys_ni_syscall /* old prof syscall holder */ + .long sys_brk /* 45 */ + .long sys_setgid16 + .long sys_getgid16 + .long sys_signal + .long sys_geteuid16 + .long sys_getegid16 /* 50 */ + .long sys_acct + .long sys_umount /* recycled never used phys() */ + .long sys_ni_syscall /* old lock syscall holder */ + .long sys_ioctl + .long sys_fcntl /* 55 */ + .long sys_ni_syscall /* old mpx syscall holder */ + .long sys_setpgid + .long sys_ni_syscall /* old ulimit syscall holder */ + .long sys_ni_syscall /* sys_olduname */ + .long sys_umask /* 60 */ + .long sys_chroot + .long sys_ustat + .long sys_dup2 + .long sys_getppid + .long sys_getpgrp /* 65 */ + .long sys_setsid + .long sys_sigaction + .long sys_sgetmask + .long sys_ssetmask + .long sys_setreuid16 /* 70 */ + .long sys_setregid16 + .long sys_sigsuspend + .long sys_sigpending + .long sys_sethostname + .long sys_setrlimit /* 75 */ + .long sys_old_getrlimit + .long sys_getrusage + .long sys_gettimeofday + .long sys_settimeofday + .long sys_getgroups16 /* 80 */ + .long sys_setgroups16 + .long sys_ni_syscall /* sys_oldselect */ + .long sys_symlink + .long sys_lstat + .long sys_readlink /* 85 */ + .long sys_uselib + .long sys_swapon + .long sys_reboot + .long old_readdir + .long old_mmap /* 90 */ + .long sys_munmap + .long sys_truncate + .long sys_ftruncate + .long sys_fchmod + .long sys_fchown16 /* 95 */ + .long sys_getpriority + .long sys_setpriority + .long sys_ni_syscall /* old profil syscall holder */ + .long sys_statfs + .long sys_fstatfs /* 100 */ + .long sys_ni_syscall /* ioperm */ + .long sys_socketcall + .long sys_syslog + .long sys_setitimer + .long sys_getitimer /* 105 */ + .long sys_newstat + .long sys_newlstat + .long sys_newfstat + .long sys_uname + .long sys_ni_syscall /* 110 */ /* iopl */ + .long sys_vhangup + .long sys_ni_syscall /* idle */ + .long sys_ni_syscall /* vm86old */ + .long sys_wait4 + .long sys_swapoff /* 115 */ + .long sys_sysinfo + .long sys_ipc + .long sys_fsync + .long sys_sigreturn + .long sys_clone /* 120 */ + .long sys_setdomainname + .long sys_newuname + .long sys_ni_syscall /* sys_modify_ldt */ + .long sys_adjtimex + .long sys_mprotect /* 125 */ + .long sys_sigprocmask + .long sys_ni_syscall /* old "create_module" */ + .long sys_init_module + .long sys_delete_module + .long sys_ni_syscall /* 130: old "get_kernel_syms" */ + .long sys_quotactl + .long sys_getpgid + .long sys_fchdir + .long sys_bdflush + .long sys_sysfs /* 135 */ + .long sys_personality + .long sys_ni_syscall /* for afs_syscall */ + .long sys_setfsuid16 + .long sys_setfsgid16 + .long sys_llseek /* 140 */ + .long sys_getdents + .long sys_select + .long sys_flock + .long sys_msync + .long sys_readv /* 145 */ + .long sys_writev + .long sys_getsid + .long sys_fdatasync + .long sys_sysctl + .long sys_mlock /* 150 */ + .long sys_munlock + .long sys_mlockall + .long sys_munlockall + .long sys_sched_setparam + .long sys_sched_getparam /* 155 */ + .long sys_sched_setscheduler + .long sys_sched_getscheduler + .long sys_sched_yield + .long sys_sched_get_priority_max + .long sys_sched_get_priority_min /* 160 */ + .long sys_sched_rr_get_interval + .long sys_nanosleep + .long sys_mremap + .long sys_setresuid16 + .long sys_getresuid16 /* 165 */ + .long sys_ni_syscall /* vm86 */ + .long sys_ni_syscall /* old "query_module" */ + .long sys_poll + .long sys_nfsservctl + .long sys_setresgid16 /* 170 */ + .long sys_getresgid16 + .long sys_prctl + .long sys_rt_sigreturn + .long sys_rt_sigaction + .long sys_rt_sigprocmask /* 175 */ + .long sys_rt_sigpending + .long sys_rt_sigtimedwait + .long sys_rt_sigqueueinfo + .long sys_rt_sigsuspend + .long sys_pread_wrapper /* 180 */ + .long sys_pwrite_wrapper + .long sys_chown16 + .long sys_getcwd + .long sys_capget + .long sys_capset /* 185 */ + .long sys_sigaltstack + .long sys_sendfile + .long sys_ni_syscall /* streams1 */ + .long sys_ni_syscall /* streams2 */ + .long sys_vfork /* 190 */ + .long sys_getrlimit + .long sys_mmap2 + .long sys_truncate64 + .long sys_ftruncate64 + .long sys_stat64 /* 195 */ + .long sys_lstat64 + .long sys_fstat64 + .long sys_lchown + .long sys_getuid + .long sys_getgid /* 200 */ + .long sys_geteuid + .long sys_getegid + .long sys_setreuid + .long sys_setregid + .long sys_getgroups /* 205 */ + .long sys_setgroups + .long sys_fchown + .long sys_setresuid + .long sys_getresuid + .long sys_setresgid /* 210 */ + .long sys_getresgid + .long sys_chown + .long sys_setuid + .long sys_setgid + .long sys_setfsuid /* 215 */ + .long sys_setfsgid + .long sys_pivot_root + .long sys_mincore + .long sys_madvise + .long sys_getdents64 /* 220 */ + .long sys_fcntl64 + .long sys_ni_syscall /* reserved for TUX */ + .long sys_ni_syscall /* Reserved for Security */ + .long sys_gettid + .long sys_readahead /* 225 */ + .long sys_setxattr + .long sys_lsetxattr + .long sys_fsetxattr + .long sys_getxattr + .long sys_lgetxattr /* 230 */ + .long sys_fgetxattr + .long sys_listxattr + .long sys_llistxattr + .long sys_flistxattr + .long sys_removexattr /* 235 */ + .long sys_lremovexattr + .long sys_fremovexattr + .long sys_tkill + .long sys_sendfile64 + .long sys_futex /* 240 */ + .long sys_sched_setaffinity + .long sys_sched_getaffinity + .long sys_ni_syscall + .long sys_ni_syscall + .long sys_io_setup /* 245 */ + .long sys_io_destroy + .long sys_io_getevents + .long sys_io_submit + .long sys_io_cancel + .long sys_fadvise64 /* 250 */ + .long sys_ni_syscall + .long sys_exit_group + .long sys_lookup_dcookie + .long sys_epoll_create + .long sys_epoll_ctl /* 255 */ + .long sys_epoll_wait + .long sys_remap_file_pages + .long sys_set_tid_address + .long sys_timer_create + .long sys_timer_settime /* 260 */ + .long sys_timer_gettime + .long sys_timer_getoverrun + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime /* 265 */ + .long sys_clock_getres + .long sys_clock_nanosleep + .long sys_statfs64 + .long sys_fstatfs64 + .long sys_tgkill /* 270 */ + .long sys_utimes + .long sys_fadvise64_64_wrapper + .long sys_ni_syscall /* Reserved for vserver */ + .long sys_ni_syscall /* Reserved for mbind */ + .long sys_ni_syscall /* 275 - get_mempolicy */ + .long sys_ni_syscall /* set_mempolicy */ + .long sys_mq_open + .long sys_mq_unlink + .long sys_mq_timedsend + .long sys_mq_timedreceive /* 280 */ + .long sys_mq_notify + .long sys_mq_getsetattr + .long sys_ni_syscall /* Reserved for kexec */ + .long sys_waitid + .long sys_add_key /* 285 */ + .long sys_request_key + .long sys_keyctl + +/* End of entry.S */ diff --git a/arch/sh/kernel/head.S b/arch/sh/kernel/head.S new file mode 100644 index 00000000000..9b9e6ef626c --- /dev/null +++ b/arch/sh/kernel/head.S @@ -0,0 +1,76 @@ +/* $Id: head.S,v 1.7 2003/09/01 17:58:19 lethal Exp $ + * + * arch/sh/kernel/head.S + * + * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Head.S contains the SH exception handlers and startup code. + */ +#include <linux/linkage.h> + + .section .empty_zero_page, "aw" +ENTRY(empty_zero_page) + .long 1 /* MOUNT_ROOT_RDONLY */ + .long 0 /* RAMDISK_FLAGS */ + .long 0x0200 /* ORIG_ROOT_DEV */ + .long 1 /* LOADER_TYPE */ + .long 0x00360000 /* INITRD_START */ + .long 0x000a0000 /* INITRD_SIZE */ + .long 0 + .balign 4096,0,4096 + + .text +/* + * Condition at the entry of _stext: + * + * BSC has already been initialized. + * INTC may or may not be initialized. + * VBR may or may not be initialized. + * MMU may or may not be initialized. + * Cache may or may not be initialized. + * Hardware (including on-chip modules) may or may not be initialized. + * + */ +ENTRY(_stext) + ! Initialize Status Register + mov.l 1f, r0 ! MD=1, RB=0, BL=0, IMASK=0xF + ldc r0, sr + ! Initialize global interrupt mask + mov #0, r0 + ldc r0, r6_bank + ! + mov.l 2f, r0 + mov r0, r15 ! Set initial r15 (stack pointer) + mov #0x20, r1 ! + shll8 r1 ! r1 = 8192 + sub r1, r0 ! + ldc r0, r7_bank ! ... and initial thread_info + ! + ! Additional CPU initialization + mov.l 6f, r0 + jsr @r0 + nop + ! Clear BSS area + mov.l 3f, r1 + add #4, r1 + mov.l 4f, r2 + mov #0, r0 +9: cmp/hs r2, r1 + bf/s 9b ! while (r1 < r2) + mov.l r0,@-r2 + ! Start kernel + mov.l 5f, r0 + jmp @r0 + nop + + .balign 4 +1: .long 0x400080F0 ! MD=1, RB=0, BL=0, FD=1, IMASK=0xF +2: .long stack +3: .long __bss_start +4: .long _end +5: .long start_kernel +6: .long sh_cpu_init diff --git a/arch/sh/kernel/init_task.c b/arch/sh/kernel/init_task.c new file mode 100644 index 00000000000..44053ea9293 --- /dev/null +++ b/arch/sh/kernel/init_task.c @@ -0,0 +1,36 @@ +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init_task.h> +#include <linux/mqueue.h> + +#include <asm/uaccess.h> +#include <asm/pgtable.h> + +static struct fs_struct init_fs = INIT_FS; +static struct files_struct init_files = INIT_FILES; +static struct signal_struct init_signals = INIT_SIGNALS(init_signals); +static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); +struct mm_struct init_mm = INIT_MM(init_mm); + +EXPORT_SYMBOL(init_mm); + +/* + * Initial thread structure. + * + * We need to make sure that this is 8192-byte aligned due to the + * way process stacks are handled. This is done by having a special + * "init_task" linker map entry.. + */ +union thread_union init_thread_union + __attribute__((__section__(".data.init_task"))) = + { INIT_THREAD_INFO(init_task) }; + +/* + * Initial task structure. + * + * All other task structs will be allocated on slabs in fork.c + */ +struct task_struct init_task = INIT_TASK(init_task); + +EXPORT_SYMBOL(init_task); diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c new file mode 100644 index 00000000000..d9932f25993 --- /dev/null +++ b/arch/sh/kernel/io.c @@ -0,0 +1,59 @@ +/* + * linux/arch/sh/kernel/io.c + * + * Copyright (C) 2000 Stuart Menefy + * + * Provide real functions which expand to whatever the header file defined. + * Also definitions of machine independent IO functions. + */ + +#include <asm/io.h> +#include <linux/module.h> + +/* + * Copy data from IO memory space to "real" memory space. + * This needs to be optimized. + */ +void memcpy_fromio(void * to, unsigned long from, unsigned long count) +{ + char *p = to; + while (count) { + count--; + *p = readb(from); + p++; + from++; + } +} + +/* + * Copy data from "real" memory space to IO memory space. + * This needs to be optimized. + */ +void memcpy_toio(unsigned long to, const void * from, unsigned long count) +{ + const char *p = from; + while (count) { + count--; + writeb(*p, to); + p++; + to++; + } +} + +/* + * "memset" on IO memory space. + * This needs to be optimized. + */ +void memset_io(unsigned long dst, int c, unsigned long count) +{ + while (count) { + count--; + writeb(c, dst); + dst++; + } +} + +EXPORT_SYMBOL(memcpy_fromio); +EXPORT_SYMBOL(memcpy_toio); +EXPORT_SYMBOL(memset_io); + diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c new file mode 100644 index 00000000000..a911b0149d1 --- /dev/null +++ b/arch/sh/kernel/io_generic.c @@ -0,0 +1,243 @@ +/* $Id: io_generic.c,v 1.2 2003/05/04 19:29:53 lethal Exp $ + * + * linux/arch/sh/kernel/io_generic.c + * + * Copyright (C) 2000 Niibe Yutaka + * + * Generic I/O routine. These can be used where a machine specific version + * is not required. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#include <asm/io.h> +#include <asm/machvec.h> +#include <linux/module.h> + +#if defined(CONFIG_CPU_SH3) +/* I'm not sure SH7709 has this kind of bug */ +#define SH3_PCMCIA_BUG_WORKAROUND 1 +#define DUMMY_READ_AREA6 0xba000000 +#endif + +#define PORT2ADDR(x) (sh_mv.mv_isa_port2addr(x)) + +unsigned long generic_io_base; + +static inline void delay(void) +{ + ctrl_inw(0xa0000000); +} + +unsigned char generic_inb(unsigned long port) +{ + return *(volatile unsigned char*)PORT2ADDR(port); +} + +unsigned short generic_inw(unsigned long port) +{ + return *(volatile unsigned short*)PORT2ADDR(port); +} + +unsigned int generic_inl(unsigned long port) +{ + return *(volatile unsigned long*)PORT2ADDR(port); +} + +unsigned char generic_inb_p(unsigned long port) +{ + unsigned long v = *(volatile unsigned char*)PORT2ADDR(port); + + delay(); + return v; +} + +unsigned short generic_inw_p(unsigned long port) +{ + unsigned long v = *(volatile unsigned short*)PORT2ADDR(port); + + delay(); + return v; +} + +unsigned int generic_inl_p(unsigned long port) +{ + unsigned long v = *(volatile unsigned long*)PORT2ADDR(port); + + delay(); + return v; +} + +/* + * insb/w/l all read a series of bytes/words/longs from a fixed port + * address. However as the port address doesn't change we only need to + * convert the port address to real address once. + */ + +void generic_insb(unsigned long port, void *buffer, unsigned long count) +{ + volatile unsigned char *port_addr; + unsigned char *buf=buffer; + + port_addr = (volatile unsigned char *)PORT2ADDR(port); + + while(count--) + *buf++ = *port_addr; +} + +void generic_insw(unsigned long port, void *buffer, unsigned long count) +{ + volatile unsigned short *port_addr; + unsigned short *buf=buffer; + + port_addr = (volatile unsigned short *)PORT2ADDR(port); + + while(count--) + *buf++ = *port_addr; +#ifdef SH3_PCMCIA_BUG_WORKAROUND + ctrl_inb (DUMMY_READ_AREA6); +#endif +} + +void generic_insl(unsigned long port, void *buffer, unsigned long count) +{ + volatile unsigned long *port_addr; + unsigned long *buf=buffer; + + port_addr = (volatile unsigned long *)PORT2ADDR(port); + + while(count--) + *buf++ = *port_addr; +#ifdef SH3_PCMCIA_BUG_WORKAROUND + ctrl_inb (DUMMY_READ_AREA6); +#endif +} + +void generic_outb(unsigned char b, unsigned long port) +{ + *(volatile unsigned char*)PORT2ADDR(port) = b; +} + +void generic_outw(unsigned short b, unsigned long port) +{ + *(volatile unsigned short*)PORT2ADDR(port) = b; +} + +void generic_outl(unsigned int b, unsigned long port) +{ + *(volatile unsigned long*)PORT2ADDR(port) = b; +} + +void generic_outb_p(unsigned char b, unsigned long port) +{ + *(volatile unsigned char*)PORT2ADDR(port) = b; + delay(); +} + +void generic_outw_p(unsigned short b, unsigned long port) +{ + *(volatile unsigned short*)PORT2ADDR(port) = b; + delay(); +} + +void generic_outl_p(unsigned int b, unsigned long port) +{ + *(volatile unsigned long*)PORT2ADDR(port) = b; + delay(); +} + +/* + * outsb/w/l all write a series of bytes/words/longs to a fixed port + * address. However as the port address doesn't change we only need to + * convert the port address to real address once. + */ + +void generic_outsb(unsigned long port, const void *buffer, unsigned long count) +{ + volatile unsigned char *port_addr; + const unsigned char *buf=buffer; + + port_addr = (volatile unsigned char *)PORT2ADDR(port); + + while(count--) + *port_addr = *buf++; +} + +void generic_outsw(unsigned long port, const void *buffer, unsigned long count) +{ + volatile unsigned short *port_addr; + const unsigned short *buf=buffer; + + port_addr = (volatile unsigned short *)PORT2ADDR(port); + + while(count--) + *port_addr = *buf++; + +#ifdef SH3_PCMCIA_BUG_WORKAROUND + ctrl_inb (DUMMY_READ_AREA6); +#endif +} + +void generic_outsl(unsigned long port, const void *buffer, unsigned long count) +{ + volatile unsigned long *port_addr; + const unsigned long *buf=buffer; + + port_addr = (volatile unsigned long *)PORT2ADDR(port); + + while(count--) + *port_addr = *buf++; + +#ifdef SH3_PCMCIA_BUG_WORKAROUND + ctrl_inb (DUMMY_READ_AREA6); +#endif +} + +unsigned char generic_readb(unsigned long addr) +{ + return *(volatile unsigned char*)addr; +} + +unsigned short generic_readw(unsigned long addr) +{ + return *(volatile unsigned short*)addr; +} + +unsigned int generic_readl(unsigned long addr) +{ + return *(volatile unsigned long*)addr; +} + +void generic_writeb(unsigned char b, unsigned long addr) +{ + *(volatile unsigned char*)addr = b; +} + +void generic_writew(unsigned short b, unsigned long addr) +{ + *(volatile unsigned short*)addr = b; +} + +void generic_writel(unsigned int b, unsigned long addr) +{ + *(volatile unsigned long*)addr = b; +} + +void * generic_ioremap(unsigned long offset, unsigned long size) +{ + return (void *) P2SEGADDR(offset); +} +EXPORT_SYMBOL(generic_ioremap); + +void generic_iounmap(void *addr) +{ +} +EXPORT_SYMBOL(generic_iounmap); + +unsigned long generic_isa_port2addr(unsigned long offset) +{ + return offset + generic_io_base; +} diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c new file mode 100644 index 00000000000..54c171225b7 --- /dev/null +++ b/arch/sh/kernel/irq.c @@ -0,0 +1,106 @@ +/* $Id: irq.c,v 1.20 2004/01/13 05:52:11 kkojima Exp $ + * + * linux/arch/sh/kernel/irq.c + * + * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar + * + * + * SuperH version: Copyright (C) 1999 Niibe Yutaka + */ + +/* + * IRQs are in fact implemented a bit like signal handlers for the kernel. + * Naturally it's not a 1:1 relation, but there are similarities. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/ptrace.h> +#include <linux/errno.h> +#include <linux/kernel_stat.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/timex.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/init.h> +#include <linux/seq_file.h> +#include <linux/kallsyms.h> +#include <linux/bitops.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/pgalloc.h> +#include <asm/delay.h> +#include <asm/irq.h> +#include <linux/irq.h> + + +/* + * 'what should we do if we get a hw irq event on an illegal vector'. + * each architecture has to answer this themselves, it doesn't deserve + * a generic callback i think. + */ +void ack_bad_irq(unsigned int irq) +{ + printk("unexpected IRQ trap at vector %02x\n", irq); +} + +#if defined(CONFIG_PROC_FS) +int show_interrupts(struct seq_file *p, void *v) +{ + int i = *(loff_t *) v, j; + struct irqaction * action; + unsigned long flags; + + if (i == 0) { + seq_puts(p, " "); + for (j=0; j<NR_CPUS; j++) + if (cpu_online(j)) + seq_printf(p, "CPU%d ",j); + seq_putc(p, '\n'); + } + + if (i < ACTUAL_NR_IRQS) { + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; + if (!action) + goto unlock; + seq_printf(p, "%3d: ",i); + seq_printf(p, "%10u ", kstat_irqs(i)); + seq_printf(p, " %14s", irq_desc[i].handler->typename); + seq_printf(p, " %s", action->name); + + for (action=action->next; action; action = action->next) + seq_printf(p, ", %s", action->name); + seq_putc(p, '\n'); +unlock: + spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } + return 0; +} +#endif + +asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + int irq; + + irq_enter(); + asm volatile("stc r2_bank, %0\n\t" + "shlr2 %0\n\t" + "shlr2 %0\n\t" + "shlr %0\n\t" + "add #-16, %0\n\t" + :"=z" (irq)); + irq = irq_demux(irq); + __do_IRQ(irq, ®s); + irq_exit(); + return 1; +} diff --git a/arch/sh/kernel/kgdb_jmp.S b/arch/sh/kernel/kgdb_jmp.S new file mode 100644 index 00000000000..339bb1d7ff0 --- /dev/null +++ b/arch/sh/kernel/kgdb_jmp.S @@ -0,0 +1,33 @@ +#include <linux/linkage.h> + +ENTRY(setjmp) + add #(9*4), r4 + sts.l pr, @-r4 + mov.l r15, @-r4 + mov.l r14, @-r4 + mov.l r13, @-r4 + mov.l r12, @-r4 + mov.l r11, @-r4 + mov.l r10, @-r4 + mov.l r9, @-r4 + mov.l r8, @-r4 + rts + mov #0, r0 + +ENTRY(longjmp) + mov.l @r4+, r8 + mov.l @r4+, r9 + mov.l @r4+, r10 + mov.l @r4+, r11 + mov.l @r4+, r12 + mov.l @r4+, r13 + mov.l @r4+, r14 + mov.l @r4+, r15 + lds.l @r4+, pr + mov r5, r0 + tst r0, r0 + bf 1f + mov #1, r0 ! in case val==0 +1: rts + nop + diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c new file mode 100644 index 00000000000..42638b92b51 --- /dev/null +++ b/arch/sh/kernel/kgdb_stub.c @@ -0,0 +1,1491 @@ +/* + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Containes extracts from code by Glenn Engel, Jim Kingdon, + * David Grothe <dave@gcom.com>, Tigran Aivazian <tigran@sco.com>, + * Amit S. Kale <akale@veritas.com>, William Gatliff <bgat@open-widgets.com>, + * Ben Lee, Steve Chamberlain and Benoit Miller <fulg@iname.com>. + * + * This version by Henry Bell <henry.bell@st.com> + * Minor modifications by Jeremy Siegel <jsiegel@mvista.com> + * + * Contains low-level support for remote debug using GDB. + * + * To enable debugger support, two things need to happen. A call to + * set_debug_traps() is necessary in order to allow any breakpoints + * or error conditions to be properly intercepted and reported to gdb. + * A breakpoint also needs to be generated to begin communication. This + * is most easily accomplished by a call to breakpoint() which does + * a trapa if the initialisation phase has been successfully completed. + * + * In this case, set_debug_traps() is not used to "take over" exceptions; + * other kernel code is modified instead to enter the kgdb functions here + * when appropriate (see entry.S for breakpoint traps and NMI interrupts, + * see traps.c for kernel error exceptions). + * + * The following gdb commands are supported: + * + * Command Function Return value + * + * g return the value of the CPU registers hex data or ENN + * G set the value of the CPU registers OK or ENN + * + * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN + * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN + * XAA..AA,LLLL: Same, but data is binary (not hex) OK or ENN + * + * c Resume at current address SNN ( signal NN) + * cAA..AA Continue at address AA..AA SNN + * CNN; Resume at current address with signal SNN + * CNN;AA..AA Resume at address AA..AA with signal SNN + * + * s Step one instruction SNN + * sAA..AA Step one instruction from AA..AA SNN + * SNN; Step one instruction with signal SNN + * SNNAA..AA Step one instruction from AA..AA w/NN SNN + * + * k kill (Detach GDB) + * + * d Toggle debug flag + * D Detach GDB + * + * Hct Set thread t for operations, OK or ENN + * c = 'c' (step, cont), c = 'g' (other + * operations) + * + * qC Query current thread ID QCpid + * qfThreadInfo Get list of current threads (first) m<id> + * qsThreadInfo " " " " " (subsequent) + * qOffsets Get section offsets Text=x;Data=y;Bss=z + * + * TXX Find if thread XX is alive OK or ENN + * ? What was the last sigval ? SNN (signal NN) + * O Output to GDB console + * + * Remote communication protocol. + * + * A debug packet whose contents are <data> is encapsulated for + * transmission in the form: + * + * $ <data> # CSUM1 CSUM2 + * + * <data> must be ASCII alphanumeric and cannot include characters + * '$' or '#'. If <data> starts with two characters followed by + * ':', then the existing stubs interpret this as a sequence number. + * + * CSUM1 and CSUM2 are ascii hex representation of an 8-bit + * checksum of <data>, the most significant nibble is sent first. + * the hex digits 0-9,a-f are used. + * + * Receiver responds with: + * + * + - if CSUM is correct and ready for next packet + * - - if CSUM is incorrect + * + * Responses can be run-length encoded to save space. A '*' means that + * the next character is an ASCII encoding giving a repeat count which + * stands for that many repititions of the character preceding the '*'. + * The encoding is n+29, yielding a printable character where n >=3 + * (which is where RLE starts to win). Don't use an n > 126. + * + * So "0* " means the same as "0000". + */ + +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/linkage.h> +#include <linux/init.h> + +#include <asm/system.h> +#include <asm/current.h> +#include <asm/signal.h> +#include <asm/pgtable.h> +#include <asm/ptrace.h> +#include <asm/kgdb.h> + +#ifdef CONFIG_SH_KGDB_CONSOLE +#include <linux/console.h> +#endif + +/* Function pointers for linkage */ +kgdb_debug_hook_t *kgdb_debug_hook; +kgdb_bus_error_hook_t *kgdb_bus_err_hook; + +int (*kgdb_getchar)(void); +void (*kgdb_putchar)(int); + +static void put_debug_char(int c) +{ + if (!kgdb_putchar) + return; + (*kgdb_putchar)(c); +} +static int get_debug_char(void) +{ + if (!kgdb_getchar) + return -1; + return (*kgdb_getchar)(); +} + +/* Num chars in in/out bound buffers, register packets need NUMREGBYTES * 2 */ +#define BUFMAX 1024 +#define NUMREGBYTES (MAXREG*4) +#define OUTBUFMAX (NUMREGBYTES*2+512) + +enum regs { + R0 = 0, R1, R2, R3, R4, R5, R6, R7, + R8, R9, R10, R11, R12, R13, R14, R15, + PC, PR, GBR, VBR, MACH, MACL, SR, + /* */ + MAXREG +}; + +static unsigned int registers[MAXREG]; +struct kgdb_regs trap_registers; + +char kgdb_in_gdb_mode; +char in_nmi; /* Set during NMI to prevent reentry */ +int kgdb_nofault; /* Boolean to ignore bus errs (i.e. in GDB) */ +int kgdb_enabled = 1; /* Default to enabled, cmdline can disable */ +int kgdb_halt; + +/* Exposed for user access */ +struct task_struct *kgdb_current; +unsigned int kgdb_g_imask; +int kgdb_trapa_val; +int kgdb_excode; + +/* Default values for SCI (can override via kernel args in setup.c) */ +#ifndef CONFIG_KGDB_DEFPORT +#define CONFIG_KGDB_DEFPORT 1 +#endif + +#ifndef CONFIG_KGDB_DEFBAUD +#define CONFIG_KGDB_DEFBAUD 115200 +#endif + +#if defined(CONFIG_KGDB_DEFPARITY_E) +#define CONFIG_KGDB_DEFPARITY 'E' +#elif defined(CONFIG_KGDB_DEFPARITY_O) +#define CONFIG_KGDB_DEFPARITY 'O' +#else /* CONFIG_KGDB_DEFPARITY_N */ +#define CONFIG_KGDB_DEFPARITY 'N' +#endif + +#ifdef CONFIG_KGDB_DEFBITS_7 +#define CONFIG_KGDB_DEFBITS '7' +#else /* CONFIG_KGDB_DEFBITS_8 */ +#define CONFIG_KGDB_DEFBITS '8' +#endif + +/* SCI/UART settings, used in kgdb_console_setup() */ +int kgdb_portnum = CONFIG_KGDB_DEFPORT; +int kgdb_baud = CONFIG_KGDB_DEFBAUD; +char kgdb_parity = CONFIG_KGDB_DEFPARITY; +char kgdb_bits = CONFIG_KGDB_DEFBITS; + +/* Jump buffer for setjmp/longjmp */ +static jmp_buf rem_com_env; + +/* TRA differs sh3/4 */ +#if defined(CONFIG_CPU_SH3) +#define TRA 0xffffffd0 +#elif defined(CONFIG_CPU_SH4) +#define TRA 0xff000020 +#endif + +/* Macros for single step instruction identification */ +#define OPCODE_BT(op) (((op) & 0xff00) == 0x8900) +#define OPCODE_BF(op) (((op) & 0xff00) == 0x8b00) +#define OPCODE_BTF_DISP(op) (((op) & 0x80) ? (((op) | 0xffffff80) << 1) : \ + (((op) & 0x7f ) << 1)) +#define OPCODE_BFS(op) (((op) & 0xff00) == 0x8f00) +#define OPCODE_BTS(op) (((op) & 0xff00) == 0x8d00) +#define OPCODE_BRA(op) (((op) & 0xf000) == 0xa000) +#define OPCODE_BRA_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \ + (((op) & 0x7ff) << 1)) +#define OPCODE_BRAF(op) (((op) & 0xf0ff) == 0x0023) +#define OPCODE_BRAF_REG(op) (((op) & 0x0f00) >> 8) +#define OPCODE_BSR(op) (((op) & 0xf000) == 0xb000) +#define OPCODE_BSR_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \ + (((op) & 0x7ff) << 1)) +#define OPCODE_BSRF(op) (((op) & 0xf0ff) == 0x0003) +#define OPCODE_BSRF_REG(op) (((op) >> 8) & 0xf) +#define OPCODE_JMP(op) (((op) & 0xf0ff) == 0x402b) +#define OPCODE_JMP_REG(op) (((op) >> 8) & 0xf) +#define OPCODE_JSR(op) (((op) & 0xf0ff) == 0x400b) +#define OPCODE_JSR_REG(op) (((op) >> 8) & 0xf) +#define OPCODE_RTS(op) ((op) == 0xb) +#define OPCODE_RTE(op) ((op) == 0x2b) + +#define SR_T_BIT_MASK 0x1 +#define STEP_OPCODE 0xc320 +#define BIOS_CALL_TRAP 0x3f + +/* Exception codes as per SH-4 core manual */ +#define ADDRESS_ERROR_LOAD_VEC 7 +#define ADDRESS_ERROR_STORE_VEC 8 +#define TRAP_VEC 11 +#define INVALID_INSN_VEC 12 +#define INVALID_SLOT_VEC 13 +#define NMI_VEC 14 +#define USER_BREAK_VEC 15 +#define SERIAL_BREAK_VEC 58 + +/* Misc static */ +static int stepped_address; +static short stepped_opcode; +static const char hexchars[] = "0123456789abcdef"; +static char in_buffer[BUFMAX]; +static char out_buffer[OUTBUFMAX]; + +static void kgdb_to_gdb(const char *s); + +#ifdef CONFIG_KGDB_THREAD +static struct task_struct *trapped_thread; +static struct task_struct *current_thread; +typedef unsigned char threadref[8]; +#define BUF_THREAD_ID_SIZE 16 +#endif + +/* Return addr as a real volatile address */ +static inline unsigned int ctrl_inl(const unsigned long addr) +{ + return *(volatile unsigned long *) addr; +} + +/* Correctly set *addr using volatile */ +static inline void ctrl_outl(const unsigned int b, unsigned long addr) +{ + *(volatile unsigned long *) addr = b; +} + +/* Get high hex bits */ +static char highhex(const int x) +{ + return hexchars[(x >> 4) & 0xf]; +} + +/* Get low hex bits */ +static char lowhex(const int x) +{ + return hexchars[x & 0xf]; +} + +/* Convert ch to hex */ +static int hex(const char ch) +{ + if ((ch >= 'a') && (ch <= 'f')) + return (ch - 'a' + 10); + if ((ch >= '0') && (ch <= '9')) + return (ch - '0'); + if ((ch >= 'A') && (ch <= 'F')) + return (ch - 'A' + 10); + return (-1); +} + +/* Convert the memory pointed to by mem into hex, placing result in buf. + Returns a pointer to the last char put in buf (null) */ +static char *mem_to_hex(const char *mem, char *buf, const int count) +{ + int i; + int ch; + unsigned short s_val; + unsigned long l_val; + + /* Check for 16 or 32 */ + if (count == 2 && ((long) mem & 1) == 0) { + s_val = *(unsigned short *) mem; + mem = (char *) &s_val; + } else if (count == 4 && ((long) mem & 3) == 0) { + l_val = *(unsigned long *) mem; + mem = (char *) &l_val; + } + for (i = 0; i < count; i++) { + ch = *mem++; + *buf++ = highhex(ch); + *buf++ = lowhex(ch); + } + *buf = 0; + return (buf); +} + +/* Convert the hex array pointed to by buf into binary, to be placed in mem. + Return a pointer to the character after the last byte written */ +static char *hex_to_mem(const char *buf, char *mem, const int count) +{ + int i; + unsigned char ch; + + for (i = 0; i < count; i++) { + ch = hex(*buf++) << 4; + ch = ch + hex(*buf++); + *mem++ = ch; + } + return (mem); +} + +/* While finding valid hex chars, convert to an integer, then return it */ +static int hex_to_int(char **ptr, int *int_value) +{ + int num_chars = 0; + int hex_value; + + *int_value = 0; + + while (**ptr) { + hex_value = hex(**ptr); + if (hex_value >= 0) { + *int_value = (*int_value << 4) | hex_value; + num_chars++; + } else + break; + (*ptr)++; + } + return num_chars; +} + +/* Copy the binary array pointed to by buf into mem. Fix $, #, + and 0x7d escaped with 0x7d. Return a pointer to the character + after the last byte written. */ +static char *ebin_to_mem(const char *buf, char *mem, int count) +{ + for (; count > 0; count--, buf++) { + if (*buf == 0x7d) + *mem++ = *(++buf) ^ 0x20; + else + *mem++ = *buf; + } + return mem; +} + +/* Pack a hex byte */ +static char *pack_hex_byte(char *pkt, int byte) +{ + *pkt++ = hexchars[(byte >> 4) & 0xf]; + *pkt++ = hexchars[(byte & 0xf)]; + return pkt; +} + +#ifdef CONFIG_KGDB_THREAD + +/* Pack a thread ID */ +static char *pack_threadid(char *pkt, threadref * id) +{ + char *limit; + unsigned char *altid; + + altid = (unsigned char *) id; + + limit = pkt + BUF_THREAD_ID_SIZE; + while (pkt < limit) + pkt = pack_hex_byte(pkt, *altid++); + return pkt; +} + +/* Convert an integer into our threadref */ +static void int_to_threadref(threadref * id, const int value) +{ + unsigned char *scan = (unsigned char *) id; + int i = 4; + + while (i--) + *scan++ = 0; + + *scan++ = (value >> 24) & 0xff; + *scan++ = (value >> 16) & 0xff; + *scan++ = (value >> 8) & 0xff; + *scan++ = (value & 0xff); +} + +/* Return a task structure ptr for a particular pid */ +static struct task_struct *get_thread(int pid) +{ + struct task_struct *thread; + + /* Use PID_MAX w/gdb for pid 0 */ + if (pid == PID_MAX) pid = 0; + + /* First check via PID */ + thread = find_task_by_pid(pid); + + if (thread) + return thread; + + /* Start at the start */ + thread = init_tasks[0]; + + /* Walk along the linked list of tasks */ + do { + if (thread->pid == pid) + return thread; + thread = thread->next_task; + } while (thread != init_tasks[0]); + + return NULL; +} + +#endif /* CONFIG_KGDB_THREAD */ + +/* Scan for the start char '$', read the packet and check the checksum */ +static void get_packet(char *buffer, int buflen) +{ + unsigned char checksum; + unsigned char xmitcsum; + int i; + int count; + char ch; + + do { + /* Ignore everything until the start character */ + while ((ch = get_debug_char()) != '$'); + + checksum = 0; + xmitcsum = -1; + count = 0; + + /* Now, read until a # or end of buffer is found */ + while (count < (buflen - 1)) { + ch = get_debug_char(); + + if (ch == '#') + break; + + checksum = checksum + ch; + buffer[count] = ch; + count = count + 1; + } + + buffer[count] = 0; + + /* Continue to read checksum following # */ + if (ch == '#') { + xmitcsum = hex(get_debug_char()) << 4; + xmitcsum += hex(get_debug_char()); + + /* Checksum */ + if (checksum != xmitcsum) + put_debug_char('-'); /* Failed checksum */ + else { + /* Ack successful transfer */ + put_debug_char('+'); + + /* If a sequence char is present, reply + the sequence ID */ + if (buffer[2] == ':') { + put_debug_char(buffer[0]); + put_debug_char(buffer[1]); + + /* Remove sequence chars from buffer */ + count = strlen(buffer); + for (i = 3; i <= count; i++) + buffer[i - 3] = buffer[i]; + } + } + } + } + while (checksum != xmitcsum); /* Keep trying while we fail */ +} + +/* Send the packet in the buffer with run-length encoding */ +static void put_packet(char *buffer) +{ + int checksum; + char *src; + int runlen; + int encode; + + do { + src = buffer; + put_debug_char('$'); + checksum = 0; + + /* Continue while we still have chars left */ + while (*src) { + /* Check for runs up to 99 chars long */ + for (runlen = 1; runlen < 99; runlen++) { + if (src[0] != src[runlen]) + break; + } + + if (runlen > 3) { + /* Got a useful amount, send encoding */ + encode = runlen + ' ' - 4; + put_debug_char(*src); checksum += *src; + put_debug_char('*'); checksum += '*'; + put_debug_char(encode); checksum += encode; + src += runlen; + } else { + /* Otherwise just send the current char */ + put_debug_char(*src); checksum += *src; + src += 1; + } + } + + /* '#' Separator, put high and low components of checksum */ + put_debug_char('#'); + put_debug_char(highhex(checksum)); + put_debug_char(lowhex(checksum)); + } + while ((get_debug_char()) != '+'); /* While no ack */ +} + +/* A bus error has occurred - perform a longjmp to return execution and + allow handling of the error */ +static void kgdb_handle_bus_error(void) +{ + longjmp(rem_com_env, 1); +} + +/* Translate SH-3/4 exception numbers to unix-like signal values */ +static int compute_signal(const int excep_code) +{ + int sigval; + + switch (excep_code) { + + case INVALID_INSN_VEC: + case INVALID_SLOT_VEC: + sigval = SIGILL; + break; + case ADDRESS_ERROR_LOAD_VEC: + case ADDRESS_ERROR_STORE_VEC: + sigval = SIGSEGV; + break; + + case SERIAL_BREAK_VEC: + case NMI_VEC: + sigval = SIGINT; + break; + + case USER_BREAK_VEC: + case TRAP_VEC: + sigval = SIGTRAP; + break; + + default: + sigval = SIGBUS; /* "software generated" */ + break; + } + + return (sigval); +} + +/* Make a local copy of the registers passed into the handler (bletch) */ +static void kgdb_regs_to_gdb_regs(const struct kgdb_regs *regs, + int *gdb_regs) +{ + gdb_regs[R0] = regs->regs[R0]; + gdb_regs[R1] = regs->regs[R1]; + gdb_regs[R2] = regs->regs[R2]; + gdb_regs[R3] = regs->regs[R3]; + gdb_regs[R4] = regs->regs[R4]; + gdb_regs[R5] = regs->regs[R5]; + gdb_regs[R6] = regs->regs[R6]; + gdb_regs[R7] = regs->regs[R7]; + gdb_regs[R8] = regs->regs[R8]; + gdb_regs[R9] = regs->regs[R9]; + gdb_regs[R10] = regs->regs[R10]; + gdb_regs[R11] = regs->regs[R11]; + gdb_regs[R12] = regs->regs[R12]; + gdb_regs[R13] = regs->regs[R13]; + gdb_regs[R14] = regs->regs[R14]; + gdb_regs[R15] = regs->regs[R15]; + gdb_regs[PC] = regs->pc; + gdb_regs[PR] = regs->pr; + gdb_regs[GBR] = regs->gbr; + gdb_regs[MACH] = regs->mach; + gdb_regs[MACL] = regs->macl; + gdb_regs[SR] = regs->sr; + gdb_regs[VBR] = regs->vbr; +} + +/* Copy local gdb registers back to kgdb regs, for later copy to kernel */ +static void gdb_regs_to_kgdb_regs(const int *gdb_regs, + struct kgdb_regs *regs) +{ + regs->regs[R0] = gdb_regs[R0]; + regs->regs[R1] = gdb_regs[R1]; + regs->regs[R2] = gdb_regs[R2]; + regs->regs[R3] = gdb_regs[R3]; + regs->regs[R4] = gdb_regs[R4]; + regs->regs[R5] = gdb_regs[R5]; + regs->regs[R6] = gdb_regs[R6]; + regs->regs[R7] = gdb_regs[R7]; + regs->regs[R8] = gdb_regs[R8]; + regs->regs[R9] = gdb_regs[R9]; + regs->regs[R10] = gdb_regs[R10]; + regs->regs[R11] = gdb_regs[R11]; + regs->regs[R12] = gdb_regs[R12]; + regs->regs[R13] = gdb_regs[R13]; + regs->regs[R14] = gdb_regs[R14]; + regs->regs[R15] = gdb_regs[R15]; + regs->pc = gdb_regs[PC]; + regs->pr = gdb_regs[PR]; + regs->gbr = gdb_regs[GBR]; + regs->mach = gdb_regs[MACH]; + regs->macl = gdb_regs[MACL]; + regs->sr = gdb_regs[SR]; + regs->vbr = gdb_regs[VBR]; +} + +#ifdef CONFIG_KGDB_THREAD +/* Make a local copy of registers from the specified thread */ +asmlinkage void ret_from_fork(void); +static void thread_regs_to_gdb_regs(const struct task_struct *thread, + int *gdb_regs) +{ + int regno; + int *tregs; + + /* Initialize to zero */ + for (regno = 0; regno < MAXREG; regno++) + gdb_regs[regno] = 0; + + /* Just making sure... */ + if (thread == NULL) + return; + + /* A new fork has pt_regs on the stack from a fork() call */ + if (thread->thread.pc == (unsigned long)ret_from_fork) { + + int vbr_val; + struct pt_regs *kregs; + kregs = (struct pt_regs*)thread->thread.sp; + + gdb_regs[R0] = kregs->regs[R0]; + gdb_regs[R1] = kregs->regs[R1]; + gdb_regs[R2] = kregs->regs[R2]; + gdb_regs[R3] = kregs->regs[R3]; + gdb_regs[R4] = kregs->regs[R4]; + gdb_regs[R5] = kregs->regs[R5]; + gdb_regs[R6] = kregs->regs[R6]; + gdb_regs[R7] = kregs->regs[R7]; + gdb_regs[R8] = kregs->regs[R8]; + gdb_regs[R9] = kregs->regs[R9]; + gdb_regs[R10] = kregs->regs[R10]; + gdb_regs[R11] = kregs->regs[R11]; + gdb_regs[R12] = kregs->regs[R12]; + gdb_regs[R13] = kregs->regs[R13]; + gdb_regs[R14] = kregs->regs[R14]; + gdb_regs[R15] = kregs->regs[R15]; + gdb_regs[PC] = kregs->pc; + gdb_regs[PR] = kregs->pr; + gdb_regs[GBR] = kregs->gbr; + gdb_regs[MACH] = kregs->mach; + gdb_regs[MACL] = kregs->macl; + gdb_regs[SR] = kregs->sr; + + asm("stc vbr, %0":"=r"(vbr_val)); + gdb_regs[VBR] = vbr_val; + return; + } + + /* Otherwise, we have only some registers from switch_to() */ + tregs = (int *)thread->thread.sp; + gdb_regs[R15] = (int)tregs; + gdb_regs[R14] = *tregs++; + gdb_regs[R13] = *tregs++; + gdb_regs[R12] = *tregs++; + gdb_regs[R11] = *tregs++; + gdb_regs[R10] = *tregs++; + gdb_regs[R9] = *tregs++; + gdb_regs[R8] = *tregs++; + gdb_regs[PR] = *tregs++; + gdb_regs[GBR] = *tregs++; + gdb_regs[PC] = thread->thread.pc; +} +#endif /* CONFIG_KGDB_THREAD */ + +/* Calculate the new address for after a step */ +static short *get_step_address(void) +{ + short op = *(short *) trap_registers.pc; + long addr; + + /* BT */ + if (OPCODE_BT(op)) { + if (trap_registers.sr & SR_T_BIT_MASK) + addr = trap_registers.pc + 4 + OPCODE_BTF_DISP(op); + else + addr = trap_registers.pc + 2; + } + + /* BTS */ + else if (OPCODE_BTS(op)) { + if (trap_registers.sr & SR_T_BIT_MASK) + addr = trap_registers.pc + 4 + OPCODE_BTF_DISP(op); + else + addr = trap_registers.pc + 4; /* Not in delay slot */ + } + + /* BF */ + else if (OPCODE_BF(op)) { + if (!(trap_registers.sr & SR_T_BIT_MASK)) + addr = trap_registers.pc + 4 + OPCODE_BTF_DISP(op); + else + addr = trap_registers.pc + 2; + } + + /* BFS */ + else if (OPCODE_BFS(op)) { + if (!(trap_registers.sr & SR_T_BIT_MASK)) + addr = trap_registers.pc + 4 + OPCODE_BTF_DISP(op); + else + addr = trap_registers.pc + 4; /* Not in delay slot */ + } + + /* BRA */ + else if (OPCODE_BRA(op)) + addr = trap_registers.pc + 4 + OPCODE_BRA_DISP(op); + + /* BRAF */ + else if (OPCODE_BRAF(op)) + addr = trap_registers.pc + 4 + + trap_registers.regs[OPCODE_BRAF_REG(op)]; + + /* BSR */ + else if (OPCODE_BSR(op)) + addr = trap_registers.pc + 4 + OPCODE_BSR_DISP(op); + + /* BSRF */ + else if (OPCODE_BSRF(op)) + addr = trap_registers.pc + 4 + + trap_registers.regs[OPCODE_BSRF_REG(op)]; + + /* JMP */ + else if (OPCODE_JMP(op)) + addr = trap_registers.regs[OPCODE_JMP_REG(op)]; + + /* JSR */ + else if (OPCODE_JSR(op)) + addr = trap_registers.regs[OPCODE_JSR_REG(op)]; + + /* RTS */ + else if (OPCODE_RTS(op)) + addr = trap_registers.pr; + + /* RTE */ + else if (OPCODE_RTE(op)) + addr = trap_registers.regs[15]; + + /* Other */ + else + addr = trap_registers.pc + 2; + + kgdb_flush_icache_range(addr, addr + 2); + return (short *) addr; +} + +/* Set up a single-step. Replace the instruction immediately after the + current instruction (i.e. next in the expected flow of control) with a + trap instruction, so that returning will cause only a single instruction + to be executed. Note that this model is slightly broken for instructions + with delay slots (e.g. B[TF]S, BSR, BRA etc), where both the branch + and the instruction in the delay slot will be executed. */ +static void do_single_step(void) +{ + unsigned short *addr = 0; + + /* Determine where the target instruction will send us to */ + addr = get_step_address(); + stepped_address = (int)addr; + + /* Replace it */ + stepped_opcode = *(short *)addr; + *addr = STEP_OPCODE; + + /* Flush and return */ + kgdb_flush_icache_range((long) addr, (long) addr + 2); + return; +} + +/* Undo a single step */ +static void undo_single_step(void) +{ + /* If we have stepped, put back the old instruction */ + /* Use stepped_address in case we stopped elsewhere */ + if (stepped_opcode != 0) { + *(short*)stepped_address = stepped_opcode; + kgdb_flush_icache_range(stepped_address, stepped_address + 2); + } + stepped_opcode = 0; +} + +/* Send a signal message */ +static void send_signal_msg(const int signum) +{ +#ifndef CONFIG_KGDB_THREAD + out_buffer[0] = 'S'; + out_buffer[1] = highhex(signum); + out_buffer[2] = lowhex(signum); + out_buffer[3] = 0; + put_packet(out_buffer); +#else /* CONFIG_KGDB_THREAD */ + int threadid; + threadref thref; + char *out = out_buffer; + const char *tstring = "thread"; + + *out++ = 'T'; + *out++ = highhex(signum); + *out++ = lowhex(signum); + + while (*tstring) { + *out++ = *tstring++; + } + *out++ = ':'; + + threadid = trapped_thread->pid; + if (threadid == 0) threadid = PID_MAX; + int_to_threadref(&thref, threadid); + pack_threadid(out, &thref); + out += BUF_THREAD_ID_SIZE; + *out++ = ';'; + + *out = 0; + put_packet(out_buffer); +#endif /* CONFIG_KGDB_THREAD */ +} + +/* Reply that all was well */ +static void send_ok_msg(void) +{ + strcpy(out_buffer, "OK"); + put_packet(out_buffer); +} + +/* Reply that an error occurred */ +static void send_err_msg(void) +{ + strcpy(out_buffer, "E01"); + put_packet(out_buffer); +} + +/* Empty message indicates unrecognised command */ +static void send_empty_msg(void) +{ + put_packet(""); +} + +/* Read memory due to 'm' message */ +static void read_mem_msg(void) +{ + char *ptr; + int addr; + int length; + + /* Jmp, disable bus error handler */ + if (setjmp(rem_com_env) == 0) { + + kgdb_nofault = 1; + + /* Walk through, have m<addr>,<length> */ + ptr = &in_buffer[1]; + if (hex_to_int(&ptr, &addr) && (*ptr++ == ',')) + if (hex_to_int(&ptr, &length)) { + ptr = 0; + if (length * 2 > OUTBUFMAX) + length = OUTBUFMAX / 2; + mem_to_hex((char *) addr, out_buffer, length); + } + if (ptr) + send_err_msg(); + else + put_packet(out_buffer); + } else + send_err_msg(); + + /* Restore bus error handler */ + kgdb_nofault = 0; +} + +/* Write memory due to 'M' or 'X' message */ +static void write_mem_msg(int binary) +{ + char *ptr; + int addr; + int length; + + if (setjmp(rem_com_env) == 0) { + + kgdb_nofault = 1; + + /* Walk through, have M<addr>,<length>:<data> */ + ptr = &in_buffer[1]; + if (hex_to_int(&ptr, &addr) && (*ptr++ == ',')) + if (hex_to_int(&ptr, &length) && (*ptr++ == ':')) { + if (binary) + ebin_to_mem(ptr, (char*)addr, length); + else + hex_to_mem(ptr, (char*)addr, length); + kgdb_flush_icache_range(addr, addr + length); + ptr = 0; + send_ok_msg(); + } + if (ptr) + send_err_msg(); + } else + send_err_msg(); + + /* Restore bus error handler */ + kgdb_nofault = 0; +} + +/* Continue message */ +static void continue_msg(void) +{ + /* Try to read optional parameter, PC unchanged if none */ + char *ptr = &in_buffer[1]; + int addr; + + if (hex_to_int(&ptr, &addr)) + trap_registers.pc = addr; +} + +/* Continue message with signal */ +static void continue_with_sig_msg(void) +{ + int signal; + char *ptr = &in_buffer[1]; + int addr; + + /* Report limitation */ + kgdb_to_gdb("Cannot force signal in kgdb, continuing anyway.\n"); + + /* Signal */ + hex_to_int(&ptr, &signal); + if (*ptr == ';') + ptr++; + + /* Optional address */ + if (hex_to_int(&ptr, &addr)) + trap_registers.pc = addr; +} + +/* Step message */ +static void step_msg(void) +{ + continue_msg(); + do_single_step(); +} + +/* Step message with signal */ +static void step_with_sig_msg(void) +{ + continue_with_sig_msg(); + do_single_step(); +} + +/* Send register contents */ +static void send_regs_msg(void) +{ +#ifdef CONFIG_KGDB_THREAD + if (!current_thread) + kgdb_regs_to_gdb_regs(&trap_registers, registers); + else + thread_regs_to_gdb_regs(current_thread, registers); +#else + kgdb_regs_to_gdb_regs(&trap_registers, registers); +#endif + + mem_to_hex((char *) registers, out_buffer, NUMREGBYTES); + put_packet(out_buffer); +} + +/* Set register contents - currently can't set other thread's registers */ +static void set_regs_msg(void) +{ +#ifdef CONFIG_KGDB_THREAD + if (!current_thread) { +#endif + kgdb_regs_to_gdb_regs(&trap_registers, registers); + hex_to_mem(&in_buffer[1], (char *) registers, NUMREGBYTES); + gdb_regs_to_kgdb_regs(registers, &trap_registers); + send_ok_msg(); +#ifdef CONFIG_KGDB_THREAD + } else + send_err_msg(); +#endif +} + + +#ifdef CONFIG_KGDB_THREAD + +/* Set the status for a thread */ +void set_thread_msg(void) +{ + int threadid; + struct task_struct *thread = NULL; + char *ptr; + + switch (in_buffer[1]) { + + /* To select which thread for gG etc messages, i.e. supported */ + case 'g': + + ptr = &in_buffer[2]; + hex_to_int(&ptr, &threadid); + thread = get_thread(threadid); + + /* If we haven't found it */ + if (!thread) { + send_err_msg(); + break; + } + + /* Set current_thread (or not) */ + if (thread == trapped_thread) + current_thread = NULL; + else + current_thread = thread; + send_ok_msg(); + break; + + /* To select which thread for cCsS messages, i.e. unsupported */ + case 'c': + send_ok_msg(); + break; + + default: + send_empty_msg(); + break; + } +} + +/* Is a thread alive? */ +static void thread_status_msg(void) +{ + char *ptr; + int threadid; + struct task_struct *thread = NULL; + + ptr = &in_buffer[1]; + hex_to_int(&ptr, &threadid); + thread = get_thread(threadid); + if (thread) + send_ok_msg(); + else + send_err_msg(); +} +/* Send the current thread ID */ +static void thread_id_msg(void) +{ + int threadid; + threadref thref; + + out_buffer[0] = 'Q'; + out_buffer[1] = 'C'; + + if (current_thread) + threadid = current_thread->pid; + else if (trapped_thread) + threadid = trapped_thread->pid; + else /* Impossible, but just in case! */ + { + send_err_msg(); + return; + } + + /* Translate pid 0 to PID_MAX for gdb */ + if (threadid == 0) threadid = PID_MAX; + + int_to_threadref(&thref, threadid); + pack_threadid(out_buffer + 2, &thref); + out_buffer[2 + BUF_THREAD_ID_SIZE] = '\0'; + put_packet(out_buffer); +} + +/* Send thread info */ +static void thread_info_msg(void) +{ + struct task_struct *thread = NULL; + int threadid; + char *pos; + threadref thref; + + /* Start with 'm' */ + out_buffer[0] = 'm'; + pos = &out_buffer[1]; + + /* For all possible thread IDs - this will overrun if > 44 threads! */ + /* Start at 1 and include PID_MAX (since GDB won't use pid 0...) */ + for (threadid = 1; threadid <= PID_MAX; threadid++) { + + read_lock(&tasklist_lock); + thread = get_thread(threadid); + read_unlock(&tasklist_lock); + + /* If it's a valid thread */ + if (thread) { + int_to_threadref(&thref, threadid); + pack_threadid(pos, &thref); + pos += BUF_THREAD_ID_SIZE; + *pos++ = ','; + } + } + *--pos = 0; /* Lose final comma */ + put_packet(out_buffer); + +} + +/* Return printable info for gdb's 'info threads' command */ +static void thread_extra_info_msg(void) +{ + int threadid; + struct task_struct *thread = NULL; + char buffer[20], *ptr; + int i; + + /* Extract thread ID */ + ptr = &in_buffer[17]; + hex_to_int(&ptr, &threadid); + thread = get_thread(threadid); + + /* If we don't recognise it, say so */ + if (thread == NULL) + strcpy(buffer, "(unknown)"); + else + strcpy(buffer, thread->comm); + + /* Construct packet */ + for (i = 0, ptr = out_buffer; buffer[i]; i++) + ptr = pack_hex_byte(ptr, buffer[i]); + + if (thread->thread.pc == (unsigned long)ret_from_fork) { + strcpy(buffer, "<new fork>"); + for (i = 0; buffer[i]; i++) + ptr = pack_hex_byte(ptr, buffer[i]); + } + + *ptr = '\0'; + put_packet(out_buffer); +} + +/* Handle all qFooBarBaz messages - have to use an if statement as + opposed to a switch because q messages can have > 1 char id. */ +static void query_msg(void) +{ + const char *q_start = &in_buffer[1]; + + /* qC = return current thread ID */ + if (strncmp(q_start, "C", 1) == 0) + thread_id_msg(); + + /* qfThreadInfo = query all threads (first) */ + else if (strncmp(q_start, "fThreadInfo", 11) == 0) + thread_info_msg(); + + /* qsThreadInfo = query all threads (subsequent). We know we have sent + them all after the qfThreadInfo message, so there are no to send */ + else if (strncmp(q_start, "sThreadInfo", 11) == 0) + put_packet("l"); /* el = last */ + + /* qThreadExtraInfo = supply printable information per thread */ + else if (strncmp(q_start, "ThreadExtraInfo", 15) == 0) + thread_extra_info_msg(); + + /* Unsupported - empty message as per spec */ + else + send_empty_msg(); +} +#endif /* CONFIG_KGDB_THREAD */ + +/* + * Bring up the ports.. + */ +static int kgdb_serial_setup(void) +{ + extern int kgdb_console_setup(struct console *co, char *options); + struct console dummy; + + kgdb_console_setup(&dummy, 0); + + return 0; +} + +/* The command loop, read and act on requests */ +static void kgdb_command_loop(const int excep_code, const int trapa_value) +{ + int sigval; + + if (excep_code == NMI_VEC) { +#ifndef CONFIG_KGDB_NMI + KGDB_PRINTK("Ignoring unexpected NMI?\n"); + return; +#else /* CONFIG_KGDB_NMI */ + if (!kgdb_enabled) { + kgdb_enabled = 1; + kgdb_init(); + } +#endif /* CONFIG_KGDB_NMI */ + } + + /* Ignore if we're disabled */ + if (!kgdb_enabled) + return; + +#ifdef CONFIG_KGDB_THREAD + /* Until GDB specifies a thread */ + current_thread = NULL; + trapped_thread = current; +#endif + + /* Enter GDB mode (e.g. after detach) */ + if (!kgdb_in_gdb_mode) { + /* Do serial setup, notify user, issue preemptive ack */ + kgdb_serial_setup(); + KGDB_PRINTK("Waiting for GDB (on %s%d at %d baud)\n", + (kgdb_porttype ? kgdb_porttype->name : ""), + kgdb_portnum, kgdb_baud); + kgdb_in_gdb_mode = 1; + put_debug_char('+'); + } + + /* Reply to host that an exception has occurred */ + sigval = compute_signal(excep_code); + send_signal_msg(sigval); + + /* TRAP_VEC exception indicates a software trap inserted in place of + code by GDB so back up PC by one instruction, as this instruction + will later be replaced by its original one. Do NOT do this for + trap 0xff, since that indicates a compiled-in breakpoint which + will not be replaced (and we would retake the trap forever) */ + if ((excep_code == TRAP_VEC) && (trapa_value != (0xff << 2))) { + trap_registers.pc -= 2; + } + + /* Undo any stepping we may have done */ + undo_single_step(); + + while (1) { + + out_buffer[0] = 0; + get_packet(in_buffer, BUFMAX); + + /* Examine first char of buffer to see what we need to do */ + switch (in_buffer[0]) { + + case '?': /* Send which signal we've received */ + send_signal_msg(sigval); + break; + + case 'g': /* Return the values of the CPU registers */ + send_regs_msg(); + break; + + case 'G': /* Set the value of the CPU registers */ + set_regs_msg(); + break; + + case 'm': /* Read LLLL bytes address AA..AA */ + read_mem_msg(); + break; + + case 'M': /* Write LLLL bytes address AA..AA, ret OK */ + write_mem_msg(0); /* 0 = data in hex */ + break; + + case 'X': /* Write LLLL bytes esc bin address AA..AA */ + if (kgdb_bits == '8') + write_mem_msg(1); /* 1 = data in binary */ + else + send_empty_msg(); + break; + + case 'C': /* Continue, signum included, we ignore it */ + continue_with_sig_msg(); + return; + + case 'c': /* Continue at address AA..AA (optional) */ + continue_msg(); + return; + + case 'S': /* Step, signum included, we ignore it */ + step_with_sig_msg(); + return; + + case 's': /* Step one instruction from AA..AA */ + step_msg(); + return; + +#ifdef CONFIG_KGDB_THREAD + + case 'H': /* Task related */ + set_thread_msg(); + break; + + case 'T': /* Query thread status */ + thread_status_msg(); + break; + + case 'q': /* Handle query - currently thread-related */ + query_msg(); + break; +#endif + + case 'k': /* 'Kill the program' with a kernel ? */ + break; + + case 'D': /* Detach from program, send reply OK */ + kgdb_in_gdb_mode = 0; + send_ok_msg(); + get_debug_char(); + return; + + default: + send_empty_msg(); + break; + } + } +} + +/* There has been an exception, most likely a breakpoint. */ +void kgdb_handle_exception(struct pt_regs *regs) +{ + int excep_code, vbr_val; + int count; + int trapa_value = ctrl_inl(TRA); + + /* Copy kernel regs (from stack) */ + for (count = 0; count < 16; count++) + trap_registers.regs[count] = regs->regs[count]; + trap_registers.pc = regs->pc; + trap_registers.pr = regs->pr; + trap_registers.sr = regs->sr; + trap_registers.gbr = regs->gbr; + trap_registers.mach = regs->mach; + trap_registers.macl = regs->macl; + + asm("stc vbr, %0":"=r"(vbr_val)); + trap_registers.vbr = vbr_val; + + /* Get excode for command loop call, user access */ + asm("stc r2_bank, %0":"=r"(excep_code)); + kgdb_excode = excep_code; + + /* Other interesting environment items for reference */ + asm("stc r6_bank, %0":"=r"(kgdb_g_imask)); + kgdb_current = current; + kgdb_trapa_val = trapa_value; + + /* Act on the exception */ + kgdb_command_loop(excep_code >> 5, trapa_value); + + kgdb_current = NULL; + + /* Copy back the (maybe modified) registers */ + for (count = 0; count < 16; count++) + regs->regs[count] = trap_registers.regs[count]; + regs->pc = trap_registers.pc; + regs->pr = trap_registers.pr; + regs->sr = trap_registers.sr; + regs->gbr = trap_registers.gbr; + regs->mach = trap_registers.mach; + regs->macl = trap_registers.macl; + + vbr_val = trap_registers.vbr; + asm("ldc %0, vbr": :"r"(vbr_val)); + + return; +} + +/* Trigger a breakpoint by function */ +void breakpoint(void) +{ + if (!kgdb_enabled) { + kgdb_enabled = 1; + kgdb_init(); + } + BREAKPOINT(); +} + +/* Initialise the KGDB data structures and serial configuration */ +int kgdb_init(void) +{ + if (!kgdb_enabled) + return 1; + + in_nmi = 0; + kgdb_nofault = 0; + stepped_opcode = 0; + kgdb_in_gdb_mode = 0; + + if (kgdb_serial_setup() != 0) { + KGDB_PRINTK("serial setup error\n"); + return -1; + } + + /* Init ptr to exception handler */ + kgdb_debug_hook = kgdb_handle_exception; + kgdb_bus_err_hook = kgdb_handle_bus_error; + + /* Enter kgdb now if requested, or just report init done */ + if (kgdb_halt) { + kgdb_in_gdb_mode = 1; + put_debug_char('+'); + breakpoint(); + } + else + { + KGDB_PRINTK("stub is initialized.\n"); + } + + return 0; +} + +/* Make function available for "user messages"; console will use it too. */ + +char gdbmsgbuf[BUFMAX]; +#define MAXOUT ((BUFMAX-2)/2) + +static void kgdb_msg_write(const char *s, unsigned count) +{ + int i; + int wcount; + char *bufptr; + + /* 'O'utput */ + gdbmsgbuf[0] = 'O'; + + /* Fill and send buffers... */ + while (count > 0) { + bufptr = gdbmsgbuf + 1; + + /* Calculate how many this time */ + wcount = (count > MAXOUT) ? MAXOUT : count; + + /* Pack in hex chars */ + for (i = 0; i < wcount; i++) + bufptr = pack_hex_byte(bufptr, s[i]); + *bufptr = '\0'; + + /* Move up */ + s += wcount; + count -= wcount; + + /* Write packet */ + put_packet(gdbmsgbuf); + } +} + +static void kgdb_to_gdb(const char *s) +{ + kgdb_msg_write(s, strlen(s)); +} + +#ifdef CONFIG_SH_KGDB_CONSOLE +void kgdb_console_write(struct console *co, const char *s, unsigned count) +{ + /* Bail if we're not talking to GDB */ + if (!kgdb_in_gdb_mode) + return; + + kgdb_msg_write(s, count); +} +#endif diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c new file mode 100644 index 00000000000..142a4e5b7eb --- /dev/null +++ b/arch/sh/kernel/module.c @@ -0,0 +1,146 @@ +/* Kernel module help for SH. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ +#include <linux/moduleloader.h> +#include <linux/elf.h> +#include <linux/vmalloc.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/kernel.h> + +#if 0 +#define DEBUGP printk +#else +#define DEBUGP(fmt...) +#endif + +void *module_alloc(unsigned long size) +{ + if (size == 0) + return NULL; + return vmalloc(size); +} + + +/* Free memory returned from module_alloc */ +void module_free(struct module *mod, void *module_region) +{ + vfree(module_region); + /* FIXME: If module_region == mod->init_region, trim exception + table entries. */ +} + +/* We don't need anything special. */ +int module_frob_arch_sections(Elf_Ehdr *hdr, + Elf_Shdr *sechdrs, + char *secstrings, + struct module *mod) +{ + return 0; +} + +#define COPY_UNALIGNED_WORD(sw, tw, align) \ +{ \ + void *__s = &(sw), *__t = &(tw); \ + unsigned short *__s2 = __s, *__t2 = __t; \ + unsigned char *__s1 = __s, *__t1 = __t; \ + switch ((align)) \ + { \ + case 0: \ + *(unsigned long *) __t = *(unsigned long *) __s; \ + break; \ + case 2: \ + *__t2++ = *__s2++; \ + *__t2 = *__s2; \ + break; \ + default: \ + *__t1++ = *__s1++; \ + *__t1++ = *__s1++; \ + *__t1++ = *__s1++; \ + *__t1 = *__s1; \ + break; \ + } \ +} + +int apply_relocate_add(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + unsigned int i; + Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr; + Elf32_Sym *sym; + Elf32_Addr relocation; + uint32_t *location; + uint32_t value; + int align; + + DEBUGP("Applying relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { + /* This is where to make the change */ + location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rel[i].r_offset; + /* This is the symbol it is referring to. Note that all + undefined symbols have been resolved. */ + sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + + ELF32_R_SYM(rel[i].r_info); + relocation = sym->st_value + rel[i].r_addend; + align = (int)location & 3; + + switch (ELF32_R_TYPE(rel[i].r_info)) { + case R_SH_DIR32: + COPY_UNALIGNED_WORD (*location, value, align); + value += relocation; + COPY_UNALIGNED_WORD (value, *location, align); + break; + case R_SH_REL32: + relocation = (relocation - (Elf32_Addr) location); + COPY_UNALIGNED_WORD (*location, value, align); + value += relocation; + COPY_UNALIGNED_WORD (value, *location, align); + break; + default: + printk(KERN_ERR "module %s: Unknown relocation: %u\n", + me->name, ELF32_R_TYPE(rel[i].r_info)); + return -ENOEXEC; + } + } + return 0; +} + +int apply_relocate(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + printk(KERN_ERR "module %s: REL RELOCATION unsupported\n", + me->name); + return -ENOEXEC; +} + +int module_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + struct module *me) +{ + return 0; +} + +void module_arch_cleanup(struct module *mod) +{ +} diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c new file mode 100644 index 00000000000..3d024590c24 --- /dev/null +++ b/arch/sh/kernel/process.c @@ -0,0 +1,531 @@ +/* $Id: process.c,v 1.28 2004/05/05 16:54:23 lethal Exp $ + * + * linux/arch/sh/kernel/process.c + * + * Copyright (C) 1995 Linus Torvalds + * + * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima + */ + +/* + * This file handles the architecture-dependent parts of process handling.. + */ + +#include <linux/module.h> +#include <linux/unistd.h> +#include <linux/mm.h> +#include <linux/elfcore.h> +#include <linux/slab.h> +#include <linux/a.out.h> +#include <linux/ptrace.h> +#include <linux/platform.h> +#include <linux/kallsyms.h> + +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/mmu_context.h> +#include <asm/elf.h> +#if defined(CONFIG_SH_HS7751RVOIP) +#include <asm/hs7751rvoip/hs7751rvoip.h> +#elif defined(CONFIG_SH_RTS7751R2D) +#include <asm/rts7751r2d/rts7751r2d.h> +#endif + +static int hlt_counter=0; + +int ubc_usercnt = 0; + +#define HARD_IDLE_TIMEOUT (HZ / 3) + +void disable_hlt(void) +{ + hlt_counter++; +} + +EXPORT_SYMBOL(disable_hlt); + +void enable_hlt(void) +{ + hlt_counter--; +} + +EXPORT_SYMBOL(enable_hlt); + +void default_idle(void) +{ + /* endless idle loop with no priority at all */ + while (1) { + if (hlt_counter) { + while (1) + if (need_resched()) + break; + } else { + while (!need_resched()) + cpu_sleep(); + } + + schedule(); + } +} + +void cpu_idle(void) +{ + default_idle(); +} + +void machine_restart(char * __unused) +{ + /* SR.BL=1 and invoke address error to let CPU reset (manual reset) */ + asm volatile("ldc %0, sr\n\t" + "mov.l @%1, %0" : : "r" (0x10000000), "r" (0x80000001)); +} + +EXPORT_SYMBOL(machine_restart); + +void machine_halt(void) +{ +#if defined(CONFIG_SH_HS7751RVOIP) + unsigned short value; + + value = ctrl_inw(PA_OUTPORTR); + ctrl_outw((value & 0xffdf), PA_OUTPORTR); +#elif defined(CONFIG_SH_RTS7751R2D) + ctrl_outw(0x0001, PA_POWOFF); +#endif + while (1) + cpu_sleep(); +} + +EXPORT_SYMBOL(machine_halt); + +void machine_power_off(void) +{ +#if defined(CONFIG_SH_HS7751RVOIP) + unsigned short value; + + value = ctrl_inw(PA_OUTPORTR); + ctrl_outw((value & 0xffdf), PA_OUTPORTR); +#elif defined(CONFIG_SH_RTS7751R2D) + ctrl_outw(0x0001, PA_POWOFF); +#endif +} + +EXPORT_SYMBOL(machine_power_off); + +void show_regs(struct pt_regs * regs) +{ + printk("\n"); + printk("Pid : %d, Comm: %20s\n", current->pid, current->comm); + print_symbol("PC is at %s\n", regs->pc); + printk("PC : %08lx SP : %08lx SR : %08lx ", + regs->pc, regs->regs[15], regs->sr); +#ifdef CONFIG_MMU + printk("TEA : %08x ", ctrl_inl(MMU_TEA)); +#else + printk(" "); +#endif + printk("%s\n", print_tainted()); + + printk("R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n", + regs->regs[0],regs->regs[1], + regs->regs[2],regs->regs[3]); + printk("R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n", + regs->regs[4],regs->regs[5], + regs->regs[6],regs->regs[7]); + printk("R8 : %08lx R9 : %08lx R10 : %08lx R11 : %08lx\n", + regs->regs[8],regs->regs[9], + regs->regs[10],regs->regs[11]); + printk("R12 : %08lx R13 : %08lx R14 : %08lx\n", + regs->regs[12],regs->regs[13], + regs->regs[14]); + printk("MACH: %08lx MACL: %08lx GBR : %08lx PR : %08lx\n", + regs->mach, regs->macl, regs->gbr, regs->pr); + + /* + * If we're in kernel mode, dump the stack too.. + */ + if (!user_mode(regs)) { + extern void show_task(unsigned long *sp); + unsigned long sp = regs->regs[15]; + + show_task((unsigned long *)sp); + } +} + +/* + * Create a kernel thread + */ + +/* + * This is the mechanism for creating a new kernel thread. + * + */ +extern void kernel_thread_helper(void); +__asm__(".align 5\n" + "kernel_thread_helper:\n\t" + "jsr @r5\n\t" + " nop\n\t" + "mov.l 1f, r1\n\t" + "jsr @r1\n\t" + " mov r0, r4\n\t" + ".align 2\n\t" + "1:.long do_exit"); + +int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) +{ /* Don't use this in BL=1(cli). Or else, CPU resets! */ + struct pt_regs regs; + + memset(®s, 0, sizeof(regs)); + regs.regs[4] = (unsigned long) arg; + regs.regs[5] = (unsigned long) fn; + + regs.pc = (unsigned long) kernel_thread_helper; + regs.sr = (1 << 30); + + /* Ok, create the new process.. */ + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); +} + +/* + * Free current thread data structures etc.. + */ +void exit_thread(void) +{ + if (current->thread.ubc_pc) { + current->thread.ubc_pc = 0; + ubc_usercnt -= 1; + } +} + +void flush_thread(void) +{ +#if defined(CONFIG_SH_FPU) + struct task_struct *tsk = current; + struct pt_regs *regs = (struct pt_regs *) + ((unsigned long)tsk->thread_info + + THREAD_SIZE - sizeof(struct pt_regs) + - sizeof(unsigned long)); + + /* Forget lazy FPU state */ + clear_fpu(tsk, regs); + clear_used_math(); +#endif +} + +void release_thread(struct task_struct *dead_task) +{ + /* do nothing */ +} + +/* Fill in the fpu structure for a core dump.. */ +int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu) +{ + int fpvalid = 0; + +#if defined(CONFIG_SH_FPU) + struct task_struct *tsk = current; + + fpvalid = !!tsk_used_math(tsk); + if (fpvalid) { + unlazy_fpu(tsk, regs); + memcpy(fpu, &tsk->thread.fpu.hard, sizeof(*fpu)); + } +#endif + + return fpvalid; +} + +/* + * Capture the user space registers if the task is not running (in user space) + */ +int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) +{ + struct pt_regs ptregs; + + ptregs = *(struct pt_regs *) + ((unsigned long)tsk->thread_info + THREAD_SIZE + - sizeof(struct pt_regs) +#ifdef CONFIG_SH_DSP + - sizeof(struct pt_dspregs) +#endif + - sizeof(unsigned long)); + elf_core_copy_regs(regs, &ptregs); + + return 1; +} + +int +dump_task_fpu (struct task_struct *tsk, elf_fpregset_t *fpu) +{ + int fpvalid = 0; + +#if defined(CONFIG_SH_FPU) + fpvalid = !!tsk_used_math(tsk); + if (fpvalid) { + struct pt_regs *regs = (struct pt_regs *) + ((unsigned long)tsk->thread_info + + THREAD_SIZE - sizeof(struct pt_regs) + - sizeof(unsigned long)); + unlazy_fpu(tsk, regs); + memcpy(fpu, &tsk->thread.fpu.hard, sizeof(*fpu)); + } +#endif + + return fpvalid; +} + +asmlinkage void ret_from_fork(void); + +int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, + unsigned long unused, + struct task_struct *p, struct pt_regs *regs) +{ + struct pt_regs *childregs; +#if defined(CONFIG_SH_FPU) + struct task_struct *tsk = current; + + unlazy_fpu(tsk, regs); + p->thread.fpu = tsk->thread.fpu; + copy_to_stopped_child_used_math(p); +#endif + + childregs = ((struct pt_regs *) + (THREAD_SIZE + (unsigned long) p->thread_info) +#ifdef CONFIG_SH_DSP + - sizeof(struct pt_dspregs) +#endif + - sizeof(unsigned long)) - 1; + *childregs = *regs; + + if (user_mode(regs)) { + childregs->regs[15] = usp; + } else { + childregs->regs[15] = (unsigned long)p->thread_info + THREAD_SIZE; + } + if (clone_flags & CLONE_SETTLS) { + childregs->gbr = childregs->regs[0]; + } + childregs->regs[0] = 0; /* Set return value for child */ + + p->thread.sp = (unsigned long) childregs; + p->thread.pc = (unsigned long) ret_from_fork; + + p->thread.ubc_pc = 0; + + return 0; +} + +/* + * fill in the user structure for a core dump.. + */ +void dump_thread(struct pt_regs * regs, struct user * dump) +{ + dump->magic = CMAGIC; + dump->start_code = current->mm->start_code; + dump->start_data = current->mm->start_data; + dump->start_stack = regs->regs[15] & ~(PAGE_SIZE - 1); + dump->u_tsize = (current->mm->end_code - dump->start_code) >> PAGE_SHIFT; + dump->u_dsize = (current->mm->brk + (PAGE_SIZE-1) - dump->start_data) >> PAGE_SHIFT; + dump->u_ssize = (current->mm->start_stack - dump->start_stack + + PAGE_SIZE - 1) >> PAGE_SHIFT; + /* Debug registers will come here. */ + + dump->regs = *regs; + + dump->u_fpvalid = dump_fpu(regs, &dump->fpu); +} + +/* Tracing by user break controller. */ +static void +ubc_set_tracing(int asid, unsigned long pc) +{ + ctrl_outl(pc, UBC_BARA); + + /* We don't have any ASID settings for the SH-2! */ + if (cpu_data->type != CPU_SH7604) + ctrl_outb(asid, UBC_BASRA); + + ctrl_outl(0, UBC_BAMRA); + + if (cpu_data->type == CPU_SH7729) { + ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA); + ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR); + } else { + ctrl_outw(BBR_INST | BBR_READ, UBC_BBRA); + ctrl_outw(BRCR_PCBA, UBC_BRCR); + } +} + +/* + * switch_to(x,y) should switch tasks from x to y. + * + */ +struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *next) +{ +#if defined(CONFIG_SH_FPU) + struct pt_regs *regs = (struct pt_regs *) + ((unsigned long)prev->thread_info + + THREAD_SIZE - sizeof(struct pt_regs) + - sizeof(unsigned long)); + unlazy_fpu(prev, regs); +#endif + +#ifdef CONFIG_PREEMPT + { + unsigned long flags; + struct pt_regs *regs; + + local_irq_save(flags); + regs = (struct pt_regs *) + ((unsigned long)prev->thread_info + + THREAD_SIZE - sizeof(struct pt_regs) +#ifdef CONFIG_SH_DSP + - sizeof(struct pt_dspregs) +#endif + - sizeof(unsigned long)); + if (user_mode(regs) && regs->regs[15] >= 0xc0000000) { + int offset = (int)regs->regs[15]; + + /* Reset stack pointer: clear critical region mark */ + regs->regs[15] = regs->regs[1]; + if (regs->pc < regs->regs[0]) + /* Go to rewind point */ + regs->pc = regs->regs[0] + offset; + } + local_irq_restore(flags); + } +#endif + + /* + * Restore the kernel mode register + * k7 (r7_bank1) + */ + asm volatile("ldc %0, r7_bank" + : /* no output */ + : "r" (next->thread_info)); + +#ifdef CONFIG_MMU + /* If no tasks are using the UBC, we're done */ + if (ubc_usercnt == 0) + /* If no tasks are using the UBC, we're done */; + else if (next->thread.ubc_pc && next->mm) { + ubc_set_tracing(next->mm->context & MMU_CONTEXT_ASID_MASK, + next->thread.ubc_pc); + } else { + ctrl_outw(0, UBC_BBRA); + ctrl_outw(0, UBC_BBRB); + } +#endif + + return prev; +} + +asmlinkage int sys_fork(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ +#ifdef CONFIG_MMU + return do_fork(SIGCHLD, regs.regs[15], ®s, 0, NULL, NULL); +#else + /* fork almost works, enough to trick you into looking elsewhere :-( */ + return -EINVAL; +#endif +} + +asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp, + unsigned long parent_tidptr, + unsigned long child_tidptr, + struct pt_regs regs) +{ + if (!newsp) + newsp = regs.regs[15]; + return do_fork(clone_flags, newsp, ®s, 0, + (int __user *)parent_tidptr, (int __user *)child_tidptr); +} + +/* + * This is trivial, and on the face of it looks like it + * could equally well be done in user mode. + * + * Not so, for quite unobvious reasons - register pressure. + * In user mode vfork() cannot have a stack frame, and if + * done by calling the "clone()" system call directly, you + * do not have enough call-clobbered registers to hold all + * the information you need. + */ +asmlinkage int sys_vfork(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs.regs[15], ®s, + 0, NULL, NULL); +} + +/* + * sys_execve() executes a new program. + */ +asmlinkage int sys_execve(char *ufilename, char **uargv, + char **uenvp, unsigned long r7, + struct pt_regs regs) +{ + int error; + char *filename; + + filename = getname((char __user *)ufilename); + error = PTR_ERR(filename); + if (IS_ERR(filename)) + goto out; + + error = do_execve(filename, + (char __user * __user *)uargv, + (char __user * __user *)uenvp, + ®s); + if (error == 0) { + task_lock(current); + current->ptrace &= ~PT_DTRACE; + task_unlock(current); + } + putname(filename); +out: + return error; +} + +unsigned long get_wchan(struct task_struct *p) +{ + unsigned long schedule_frame; + unsigned long pc; + + if (!p || p == current || p->state == TASK_RUNNING) + return 0; + + /* + * The same comment as on the Alpha applies here, too ... + */ + pc = thread_saved_pc(p); + if (in_sched_functions(pc)) { + schedule_frame = ((unsigned long *)(long)p->thread.sp)[1]; + return (unsigned long)((unsigned long *)schedule_frame)[1]; + } + return pc; +} + +asmlinkage void break_point_trap(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + /* Clear tracing. */ + ctrl_outw(0, UBC_BBRA); + ctrl_outw(0, UBC_BBRB); + current->thread.ubc_pc = 0; + ubc_usercnt -= 1; + + force_sig(SIGTRAP, current); +} + +asmlinkage void break_point_trap_software(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + regs.pc -= 2; + force_sig(SIGTRAP, current); +} diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c new file mode 100644 index 00000000000..1b0dfb4d8ea --- /dev/null +++ b/arch/sh/kernel/ptrace.c @@ -0,0 +1,320 @@ +/* + * linux/arch/sh/kernel/ptrace.c + * + * Original x86 implementation: + * By Ross Biro 1/23/92 + * edited by Linus Torvalds + * + * SuperH version: Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/user.h> +#include <linux/slab.h> +#include <linux/security.h> + +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/mmu_context.h> + +/* + * does not yet catch signals sent when the child dies. + * in exit.c or in signal.c. + */ + +/* + * This routine will get a word off of the process kernel stack. + */ +static inline int get_stack_long(struct task_struct *task, int offset) +{ + unsigned char *stack; + + stack = (unsigned char *) + task->thread_info + THREAD_SIZE - sizeof(struct pt_regs) +#ifdef CONFIG_SH_DSP + - sizeof(struct pt_dspregs) +#endif + - sizeof(unsigned long); + stack += offset; + return (*((int *)stack)); +} + +/* + * This routine will put a word on the process kernel stack. + */ +static inline int put_stack_long(struct task_struct *task, int offset, + unsigned long data) +{ + unsigned char *stack; + + stack = (unsigned char *) + task->thread_info + THREAD_SIZE - sizeof(struct pt_regs) +#ifdef CONFIG_SH_DSP + - sizeof(struct pt_dspregs) +#endif + - sizeof(unsigned long); + stack += offset; + *(unsigned long *) stack = data; + return 0; +} + +/* + * Called by kernel/ptrace.c when detaching.. + * + * Make sure single step bits etc are not set. + */ +void ptrace_disable(struct task_struct *child) +{ + /* nothing to do.. */ +} + +asmlinkage int sys_ptrace(long request, long pid, long addr, long data) +{ + struct task_struct *child; + struct user * dummy = NULL; + int ret; + + lock_kernel(); + ret = -EPERM; + if (request == PTRACE_TRACEME) { + /* are we already being traced? */ + if (current->ptrace & PT_PTRACED) + goto out; + ret = security_ptrace(current->parent, current); + if (ret) + goto out; + /* set the ptrace bit in the process flags. */ + current->ptrace |= PT_PTRACED; + ret = 0; + goto out; + } + ret = -ESRCH; + read_lock(&tasklist_lock); + child = find_task_by_pid(pid); + if (child) + get_task_struct(child); + read_unlock(&tasklist_lock); + if (!child) + goto out; + + ret = -EPERM; + if (pid == 1) /* you may not mess with init */ + goto out_tsk; + + if (request == PTRACE_ATTACH) { + ret = ptrace_attach(child); + goto out_tsk; + } + + ret = ptrace_check_attach(child, request == PTRACE_KILL); + if (ret < 0) + goto out_tsk; + + switch (request) { + /* when I and D space are separate, these will need to be fixed. */ + case PTRACE_PEEKTEXT: /* read word at location addr. */ + case PTRACE_PEEKDATA: { + unsigned long tmp; + int copied; + + copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); + ret = -EIO; + if (copied != sizeof(tmp)) + break; + ret = put_user(tmp,(unsigned long *) data); + break; + } + + /* read the word at location addr in the USER area. */ + case PTRACE_PEEKUSR: { + unsigned long tmp; + + ret = -EIO; + if ((addr & 3) || addr < 0 || + addr > sizeof(struct user) - 3) + break; + + if (addr < sizeof(struct pt_regs)) + tmp = get_stack_long(child, addr); + else if (addr >= (long) &dummy->fpu && + addr < (long) &dummy->u_fpvalid) { + if (!tsk_used_math(child)) { + if (addr == (long)&dummy->fpu.fpscr) + tmp = FPSCR_INIT; + else + tmp = 0; + } else + tmp = ((long *)&child->thread.fpu) + [(addr - (long)&dummy->fpu) >> 2]; + } else if (addr == (long) &dummy->u_fpvalid) + tmp = !!tsk_used_math(child); + else + tmp = 0; + ret = put_user(tmp, (unsigned long *)data); + break; + } + + /* when I and D space are separate, this will have to be fixed. */ + case PTRACE_POKETEXT: /* write the word at location addr. */ + case PTRACE_POKEDATA: + ret = 0; + if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data)) + break; + ret = -EIO; + break; + + case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ + ret = -EIO; + if ((addr & 3) || addr < 0 || + addr > sizeof(struct user) - 3) + break; + + if (addr < sizeof(struct pt_regs)) + ret = put_stack_long(child, addr, data); + else if (addr >= (long) &dummy->fpu && + addr < (long) &dummy->u_fpvalid) { + set_stopped_child_used_math(child); + ((long *)&child->thread.fpu) + [(addr - (long)&dummy->fpu) >> 2] = data; + ret = 0; + } else if (addr == (long) &dummy->u_fpvalid) { + conditional_stopped_child_used_math(data, child); + ret = 0; + } + break; + + case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ + case PTRACE_CONT: { /* restart after signal. */ + ret = -EIO; + if ((unsigned long) data > _NSIG) + break; + if (request == PTRACE_SYSCALL) + set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + else + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + child->exit_code = data; + wake_up_process(child); + ret = 0; + break; + } + +/* + * make the child exit. Best I can do is send it a sigkill. + * perhaps it should be put in the status that it wants to + * exit. + */ + case PTRACE_KILL: { + ret = 0; + if (child->exit_state == EXIT_ZOMBIE) /* already dead */ + break; + child->exit_code = SIGKILL; + wake_up_process(child); + break; + } + + case PTRACE_SINGLESTEP: { /* set the trap flag. */ + long pc; + struct pt_regs *dummy = NULL; + + ret = -EIO; + if ((unsigned long) data > _NSIG) + break; + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + if ((child->ptrace & PT_DTRACE) == 0) { + /* Spurious delayed TF traps may occur */ + child->ptrace |= PT_DTRACE; + } + + pc = get_stack_long(child, (long)&dummy->pc); + + /* Next scheduling will set up UBC */ + if (child->thread.ubc_pc == 0) + ubc_usercnt += 1; + child->thread.ubc_pc = pc; + + child->exit_code = data; + /* give it a chance to run. */ + wake_up_process(child); + ret = 0; + break; + } + + case PTRACE_DETACH: /* detach a process that was attached. */ + ret = ptrace_detach(child, data); + break; + +#ifdef CONFIG_SH_DSP + case PTRACE_GETDSPREGS: { + unsigned long dp; + + ret = -EIO; + dp = ((unsigned long) child) + THREAD_SIZE - + sizeof(struct pt_dspregs); + if (*((int *) (dp - 4)) == SR_FD) { + copy_to_user(addr, (void *) dp, + sizeof(struct pt_dspregs)); + ret = 0; + } + break; + } + + case PTRACE_SETDSPREGS: { + unsigned long dp; + int i; + + ret = -EIO; + dp = ((unsigned long) child) + THREAD_SIZE - + sizeof(struct pt_dspregs); + if (*((int *) (dp - 4)) == SR_FD) { + copy_from_user((void *) dp, addr, + sizeof(struct pt_dspregs)); + ret = 0; + } + break; + } +#endif + default: + ret = ptrace_request(child, request, addr, data); + break; + } +out_tsk: + put_task_struct(child); +out: + unlock_kernel(); + return ret; +} + +asmlinkage void do_syscall_trace(void) +{ + struct task_struct *tsk = current; + + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; + if (!(tsk->ptrace & PT_PTRACED)) + return; + /* the 0x80 provides a way for the tracing parent to distinguish + between a syscall stop and SIGTRAP delivery */ + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) + ? 0x80 : 0)); + + /* + * this isn't the same as continuing with a signal, but it will do + * for normal use. strace only continues with a signal if the + * stopping signal is not SIGTRAP. -brl + */ + if (tsk->exit_code) { + send_sig(tsk->exit_code, tsk, 1); + tsk->exit_code = 0; + } +} diff --git a/arch/sh/kernel/semaphore.c b/arch/sh/kernel/semaphore.c new file mode 100644 index 00000000000..a3c24dcbf01 --- /dev/null +++ b/arch/sh/kernel/semaphore.c @@ -0,0 +1,139 @@ +/* + * Just taken from alpha implementation. + * This can't work well, perhaps. + */ +/* + * Generic semaphore code. Buyer beware. Do your own + * specific changes in <asm/semaphore-helper.h> + */ + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/init.h> +#include <asm/semaphore.h> +#include <asm/semaphore-helper.h> + +spinlock_t semaphore_wake_lock; + +/* + * Semaphores are implemented using a two-way counter: + * The "count" variable is decremented for each process + * that tries to sleep, while the "waking" variable is + * incremented when the "up()" code goes to wake up waiting + * processes. + * + * Notably, the inline "up()" and "down()" functions can + * efficiently test if they need to do any extra work (up + * needs to do something only if count was negative before + * the increment operation. + * + * waking_non_zero() (from asm/semaphore.h) must execute + * atomically. + * + * When __up() is called, the count was negative before + * incrementing it, and we need to wake up somebody. + * + * This routine adds one to the count of processes that need to + * wake up and exit. ALL waiting processes actually wake up but + * only the one that gets to the "waking" field first will gate + * through and acquire the semaphore. The others will go back + * to sleep. + * + * Note that these functions are only called when there is + * contention on the lock, and as such all this is the + * "non-critical" part of the whole semaphore business. The + * critical part is the inline stuff in <asm/semaphore.h> + * where we want to avoid any extra jumps and calls. + */ +void __up(struct semaphore *sem) +{ + wake_one_more(sem); + wake_up(&sem->wait); +} + +/* + * Perform the "down" function. Return zero for semaphore acquired, + * return negative for signalled out of the function. + * + * If called from __down, the return is ignored and the wait loop is + * not interruptible. This means that a task waiting on a semaphore + * using "down()" cannot be killed until someone does an "up()" on + * the semaphore. + * + * If called from __down_interruptible, the return value gets checked + * upon return. If the return value is negative then the task continues + * with the negative value in the return register (it can be tested by + * the caller). + * + * Either form may be used in conjunction with "up()". + * + */ + +#define DOWN_VAR \ + struct task_struct *tsk = current; \ + wait_queue_t wait; \ + init_waitqueue_entry(&wait, tsk); + +#define DOWN_HEAD(task_state) \ + \ + \ + tsk->state = (task_state); \ + add_wait_queue(&sem->wait, &wait); \ + \ + /* \ + * Ok, we're set up. sem->count is known to be less than zero \ + * so we must wait. \ + * \ + * We can let go the lock for purposes of waiting. \ + * We re-acquire it after awaking so as to protect \ + * all semaphore operations. \ + * \ + * If "up()" is called before we call waking_non_zero() then \ + * we will catch it right away. If it is called later then \ + * we will have to go through a wakeup cycle to catch it. \ + * \ + * Multiple waiters contend for the semaphore lock to see \ + * who gets to gate through and who has to wait some more. \ + */ \ + for (;;) { + +#define DOWN_TAIL(task_state) \ + tsk->state = (task_state); \ + } \ + tsk->state = TASK_RUNNING; \ + remove_wait_queue(&sem->wait, &wait); + +void __sched __down(struct semaphore * sem) +{ + DOWN_VAR + DOWN_HEAD(TASK_UNINTERRUPTIBLE) + if (waking_non_zero(sem)) + break; + schedule(); + DOWN_TAIL(TASK_UNINTERRUPTIBLE) +} + +int __sched __down_interruptible(struct semaphore * sem) +{ + int ret = 0; + DOWN_VAR + DOWN_HEAD(TASK_INTERRUPTIBLE) + + ret = waking_non_zero_interruptible(sem, tsk); + if (ret) + { + if (ret == 1) + /* ret != 0 only if we get interrupted -arca */ + ret = 0; + break; + } + schedule(); + DOWN_TAIL(TASK_INTERRUPTIBLE) + return ret; +} + +int __down_trylock(struct semaphore * sem) +{ + return waking_non_zero_trylock(sem); +} diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c new file mode 100644 index 00000000000..25b9d9ebe85 --- /dev/null +++ b/arch/sh/kernel/setup.c @@ -0,0 +1,649 @@ +/* $Id: setup.c,v 1.30 2003/10/13 07:21:19 lethal Exp $ + * + * linux/arch/sh/kernel/setup.c + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2002, 2003 Paul Mundt + */ + +/* + * This file handles the architecture-dependent parts of initialization + */ + +#include <linux/tty.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/initrd.h> +#include <linux/bootmem.h> +#include <linux/console.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/utsname.h> +#include <linux/cpu.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/io_generic.h> +#include <asm/sections.h> +#include <asm/irq.h> +#include <asm/setup.h> + +#ifdef CONFIG_SH_KGDB +#include <asm/kgdb.h> +static int kgdb_parse_options(char *options); +#endif +extern void * __rd_start, * __rd_end; +/* + * Machine setup.. + */ + +/* + * Initialize loops_per_jiffy as 10000000 (1000MIPS). + * This value will be used at the very early stage of serial setup. + * The bigger value means no problem. + */ +struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 0, 10000000, }; +struct screen_info screen_info; + +#if defined(CONFIG_SH_UNKNOWN) +struct sh_machine_vector sh_mv; +#endif + +/* We need this to satisfy some external references. */ +struct screen_info screen_info = { + 0, 25, /* orig-x, orig-y */ + 0, /* unused */ + 0, /* orig-video-page */ + 0, /* orig-video-mode */ + 80, /* orig-video-cols */ + 0,0,0, /* ega_ax, ega_bx, ega_cx */ + 25, /* orig-video-lines */ + 0, /* orig-video-isVGA */ + 16 /* orig-video-points */ +}; + +extern void platform_setup(void); +extern char *get_system_type(void); +extern int root_mountflags; + +#define MV_NAME_SIZE 32 + +static struct sh_machine_vector* __init get_mv_byname(const char* name); + +/* + * This is set up by the setup-routine at boot-time + */ +#define PARAM ((unsigned char *)empty_zero_page) + +#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000)) +#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004)) +#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008)) +#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c)) +#define INITRD_START (*(unsigned long *) (PARAM+0x010)) +#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014)) +/* ... */ +#define COMMAND_LINE ((char *) (PARAM+0x100)) + +#define RAMDISK_IMAGE_START_MASK 0x07FF +#define RAMDISK_PROMPT_FLAG 0x8000 +#define RAMDISK_LOAD_FLAG 0x4000 + +static char command_line[COMMAND_LINE_SIZE] = { 0, }; + +struct resource standard_io_resources[] = { + { "dma1", 0x00, 0x1f }, + { "pic1", 0x20, 0x3f }, + { "timer", 0x40, 0x5f }, + { "keyboard", 0x60, 0x6f }, + { "dma page reg", 0x80, 0x8f }, + { "pic2", 0xa0, 0xbf }, + { "dma2", 0xc0, 0xdf }, + { "fpu", 0xf0, 0xff } +}; + +#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource)) + +/* System RAM - interrupted by the 640kB-1M hole */ +#define code_resource (ram_resources[3]) +#define data_resource (ram_resources[4]) +static struct resource ram_resources[] = { + { "System RAM", 0x000000, 0x09ffff, IORESOURCE_BUSY }, + { "System RAM", 0x100000, 0x100000, IORESOURCE_BUSY }, + { "Video RAM area", 0x0a0000, 0x0bffff }, + { "Kernel code", 0x100000, 0 }, + { "Kernel data", 0, 0 } +}; + +unsigned long memory_start, memory_end; + +static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE], + struct sh_machine_vector** mvp, + unsigned long *mv_io_base, + int *mv_mmio_enable) +{ + char c = ' ', *to = command_line, *from = COMMAND_LINE; + int len = 0; + + /* Save unparsed command line copy for /proc/cmdline */ + memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); + saved_command_line[COMMAND_LINE_SIZE-1] = '\0'; + + memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START; + memory_end = memory_start + __MEMORY_SIZE; + + for (;;) { + /* + * "mem=XXX[kKmM]" defines a size of memory. + */ + if (c == ' ' && !memcmp(from, "mem=", 4)) { + if (to != command_line) + to--; + { + unsigned long mem_size; + + mem_size = memparse(from+4, &from); + memory_end = memory_start + mem_size; + } + } + if (c == ' ' && !memcmp(from, "sh_mv=", 6)) { + char* mv_end; + char* mv_comma; + int mv_len; + if (to != command_line) + to--; + from += 6; + mv_end = strchr(from, ' '); + if (mv_end == NULL) + mv_end = from + strlen(from); + + mv_comma = strchr(from, ','); + if ((mv_comma != NULL) && (mv_comma < mv_end)) { + int ints[3]; + get_options(mv_comma+1, ARRAY_SIZE(ints), ints); + *mv_io_base = ints[1]; + *mv_mmio_enable = ints[2]; + mv_len = mv_comma - from; + } else { + mv_len = mv_end - from; + } + if (mv_len > (MV_NAME_SIZE-1)) + mv_len = MV_NAME_SIZE-1; + memcpy(mv_name, from, mv_len); + mv_name[mv_len] = '\0'; + from = mv_end; + + *mvp = get_mv_byname(mv_name); + } + c = *(from++); + if (!c) + break; + if (COMMAND_LINE_SIZE <= ++len) + break; + *(to++) = c; + } + *to = '\0'; + *cmdline_p = command_line; +} + +static int __init sh_mv_setup(char **cmdline_p) +{ +#if defined(CONFIG_SH_UNKNOWN) + extern struct sh_machine_vector mv_unknown; +#endif + struct sh_machine_vector *mv = NULL; + char mv_name[MV_NAME_SIZE] = ""; + unsigned long mv_io_base = 0; + int mv_mmio_enable = 0; + + parse_cmdline(cmdline_p, mv_name, &mv, &mv_io_base, &mv_mmio_enable); + +#ifdef CONFIG_SH_GENERIC + if (mv == NULL) { + mv = &mv_unknown; + if (*mv_name != '\0') { + printk("Warning: Unsupported machine %s, using unknown\n", + mv_name); + } + } + sh_mv = *mv; +#endif +#ifdef CONFIG_SH_UNKNOWN + sh_mv = mv_unknown; +#endif + + /* + * Manually walk the vec, fill in anything that the board hasn't yet + * by hand, wrapping to the generic implementation. + */ +#define mv_set(elem) do { \ + if (!sh_mv.mv_##elem) \ + sh_mv.mv_##elem = generic_##elem; \ +} while (0) + + mv_set(inb); mv_set(inw); mv_set(inl); + mv_set(outb); mv_set(outw); mv_set(outl); + + mv_set(inb_p); mv_set(inw_p); mv_set(inl_p); + mv_set(outb_p); mv_set(outw_p); mv_set(outl_p); + + mv_set(insb); mv_set(insw); mv_set(insl); + mv_set(outsb); mv_set(outsw); mv_set(outsl); + + mv_set(readb); mv_set(readw); mv_set(readl); + mv_set(writeb); mv_set(writew); mv_set(writel); + + mv_set(ioremap); + mv_set(iounmap); + + mv_set(isa_port2addr); + mv_set(irq_demux); + +#ifdef CONFIG_SH_UNKNOWN + __set_io_port_base(mv_io_base); +#endif + + return 0; +} + +void __init setup_arch(char **cmdline_p) +{ + unsigned long bootmap_size; + unsigned long start_pfn, max_pfn, max_low_pfn; + +#ifdef CONFIG_EARLY_PRINTK + extern void enable_early_printk(void); + + enable_early_printk(); +#endif +#ifdef CONFIG_CMDLINE_BOOL + strcpy(COMMAND_LINE, CONFIG_CMDLINE); +#endif + + ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); + +#ifdef CONFIG_BLK_DEV_RAM + rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK; + rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0); + rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0); +#endif + + if (!MOUNT_ROOT_RDONLY) + root_mountflags &= ~MS_RDONLY; + init_mm.start_code = (unsigned long) _text; + init_mm.end_code = (unsigned long) _etext; + init_mm.end_data = (unsigned long) _edata; + init_mm.brk = (unsigned long) _end; + + code_resource.start = virt_to_bus(_text); + code_resource.end = virt_to_bus(_etext)-1; + data_resource.start = virt_to_bus(_etext); + data_resource.end = virt_to_bus(_edata)-1; + + sh_mv_setup(cmdline_p); + +#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) +#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) +#define PFN_PHYS(x) ((x) << PAGE_SHIFT) + +#ifdef CONFIG_DISCONTIGMEM + NODE_DATA(0)->bdata = &discontig_node_bdata[0]; + NODE_DATA(1)->bdata = &discontig_node_bdata[1]; + + bootmap_size = init_bootmem_node(NODE_DATA(1), + PFN_UP(__MEMORY_START_2ND), + PFN_UP(__MEMORY_START_2ND), + PFN_DOWN(__MEMORY_START_2ND+__MEMORY_SIZE_2ND)); + free_bootmem_node(NODE_DATA(1), __MEMORY_START_2ND, __MEMORY_SIZE_2ND); + reserve_bootmem_node(NODE_DATA(1), __MEMORY_START_2ND, bootmap_size); +#endif + + /* + * Find the highest page frame number we have available + */ + max_pfn = PFN_DOWN(__pa(memory_end)); + + /* + * Determine low and high memory ranges: + */ + max_low_pfn = max_pfn; + + /* + * Partially used pages are not usable - thus + * we are rounding upwards: + */ + start_pfn = PFN_UP(__pa(_end)); + + /* + * Find a proper area for the bootmem bitmap. After this + * bootstrap step all allocations (until the page allocator + * is intact) must be done via bootmem_alloc(). + */ + bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn, + __MEMORY_START>>PAGE_SHIFT, + max_low_pfn); + /* + * Register fully available low RAM pages with the bootmem allocator. + */ + { + unsigned long curr_pfn, last_pfn, pages; + + /* + * We are rounding up the start address of usable memory: + */ + curr_pfn = PFN_UP(__MEMORY_START); + /* + * ... and at the end of the usable range downwards: + */ + last_pfn = PFN_DOWN(__pa(memory_end)); + + if (last_pfn > max_low_pfn) + last_pfn = max_low_pfn; + + pages = last_pfn - curr_pfn; + free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn), + PFN_PHYS(pages)); + } + + /* + * Reserve the kernel text and + * Reserve the bootmem bitmap. We do this in two steps (first step + * was init_bootmem()), because this catches the (definitely buggy) + * case of us accidentally initializing the bootmem allocator with + * an invalid RAM area. + */ + reserve_bootmem_node(NODE_DATA(0), __MEMORY_START+PAGE_SIZE, + (PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START); + + /* + * reserve physical page 0 - it's a special BIOS page on many boxes, + * enabling clean reboots, SMP operation, laptop functions. + */ + reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE); + +#ifdef CONFIG_BLK_DEV_INITRD + ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); + if (&__rd_start != &__rd_end) { + LOADER_TYPE = 1; + INITRD_START = PHYSADDR((unsigned long)&__rd_start) - __MEMORY_START; + INITRD_SIZE = (unsigned long)&__rd_end - (unsigned long)&__rd_start; + } + + if (LOADER_TYPE && INITRD_START) { + if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) { + reserve_bootmem_node(NODE_DATA(0), INITRD_START+__MEMORY_START, INITRD_SIZE); + initrd_start = + INITRD_START ? INITRD_START + PAGE_OFFSET + __MEMORY_START : 0; + initrd_end = initrd_start + INITRD_SIZE; + } else { + printk("initrd extends beyond end of memory " + "(0x%08lx > 0x%08lx)\ndisabling initrd\n", + INITRD_START + INITRD_SIZE, + max_low_pfn << PAGE_SHIFT); + initrd_start = 0; + } + } +#endif + +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif + + /* Perform the machine specific initialisation */ + platform_setup(); + + paging_init(); +} + +struct sh_machine_vector* __init get_mv_byname(const char* name) +{ + extern int strcasecmp(const char *, const char *); + extern long __machvec_start, __machvec_end; + struct sh_machine_vector *all_vecs = + (struct sh_machine_vector *)&__machvec_start; + + int i, n = ((unsigned long)&__machvec_end + - (unsigned long)&__machvec_start)/ + sizeof(struct sh_machine_vector); + + for (i = 0; i < n; ++i) { + struct sh_machine_vector *mv = &all_vecs[i]; + if (mv == NULL) + continue; + if (strcasecmp(name, get_system_type()) == 0) { + return mv; + } + } + return NULL; +} + +static struct cpu cpu[NR_CPUS]; + +static int __init topology_init(void) +{ + int cpu_id; + + for (cpu_id = 0; cpu_id < NR_CPUS; cpu_id++) + if (cpu_possible(cpu_id)) + register_cpu(&cpu[cpu_id], cpu_id, NULL); + + return 0; +} + +subsys_initcall(topology_init); + +static const char *cpu_name[] = { + [CPU_SH7604] = "SH7604", + [CPU_SH7705] = "SH7705", + [CPU_SH7708] = "SH7708", + [CPU_SH7729] = "SH7729", + [CPU_SH7300] = "SH7300", + [CPU_SH7750] = "SH7750", + [CPU_SH7750S] = "SH7750S", + [CPU_SH7750R] = "SH7750R", + [CPU_SH7751] = "SH7751", + [CPU_SH7751R] = "SH7751R", + [CPU_SH7760] = "SH7760", + [CPU_SH73180] = "SH73180", + [CPU_ST40RA] = "ST40RA", + [CPU_ST40GX1] = "ST40GX1", + [CPU_SH4_202] = "SH4-202", + [CPU_SH4_501] = "SH4-501", + [CPU_SH_NONE] = "Unknown" +}; + +const char *get_cpu_subtype(void) +{ + return cpu_name[boot_cpu_data.type]; +} + +#ifdef CONFIG_PROC_FS +static const char *cpu_flags[] = { + "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", +}; + +static void show_cpuflags(struct seq_file *m) +{ + unsigned long i; + + seq_printf(m, "cpu flags\t:"); + + if (!cpu_data->flags) { + seq_printf(m, " %s\n", cpu_flags[0]); + return; + } + + for (i = 0; i < cpu_data->flags; i++) + if ((cpu_data->flags & (1 << i))) + seq_printf(m, " %s", cpu_flags[i+1]); + + seq_printf(m, "\n"); +} + +static void show_cacheinfo(struct seq_file *m, const char *type, struct cache_info info) +{ + unsigned int cache_size; + + cache_size = info.ways * info.sets * info.linesz; + + seq_printf(m, "%s size\t: %dKiB\n", type, cache_size >> 10); +} + +/* + * Get CPU information for use by the procfs. + */ +static int show_cpuinfo(struct seq_file *m, void *v) +{ + unsigned int cpu = smp_processor_id(); + + if (!cpu && cpu_online(cpu)) + seq_printf(m, "machine\t\t: %s\n", get_system_type()); + + seq_printf(m, "processor\t: %d\n", cpu); + seq_printf(m, "cpu family\t: %s\n", system_utsname.machine); + seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype()); + + show_cpuflags(m); + + seq_printf(m, "cache type\t: "); + + /* + * Check for what type of cache we have, we support both the + * unified cache on the SH-2 and SH-3, as well as the harvard + * style cache on the SH-4. + */ + if (test_bit(SH_CACHE_COMBINED, &(boot_cpu_data.icache.flags))) { + seq_printf(m, "unified\n"); + show_cacheinfo(m, "cache", boot_cpu_data.icache); + } else { + seq_printf(m, "split (harvard)\n"); + show_cacheinfo(m, "icache", boot_cpu_data.icache); + show_cacheinfo(m, "dcache", boot_cpu_data.dcache); + } + + seq_printf(m, "bogomips\t: %lu.%02lu\n", + boot_cpu_data.loops_per_jiffy/(500000/HZ), + (boot_cpu_data.loops_per_jiffy/(5000/HZ)) % 100); + +#define PRINT_CLOCK(name, value) \ + seq_printf(m, name " clock\t: %d.%02dMHz\n", \ + ((value) / 1000000), ((value) % 1000000)/10000) + + PRINT_CLOCK("cpu", boot_cpu_data.cpu_clock); + PRINT_CLOCK("bus", boot_cpu_data.bus_clock); +#ifdef CONFIG_CPU_SUBTYPE_ST40STB1 + PRINT_CLOCK("memory", boot_cpu_data.memory_clock); +#endif + PRINT_CLOCK("module", boot_cpu_data.module_clock); + + return 0; +} + + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + return *pos < NR_CPUS ? cpu_data + *pos : NULL; +} +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} +static void c_stop(struct seq_file *m, void *v) +{ +} +struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, +}; +#endif /* CONFIG_PROC_FS */ + +#ifdef CONFIG_SH_KGDB +/* + * Parse command-line kgdb options. By default KGDB is enabled, + * entered on error (or other action) using default serial info. + * The command-line option can include a serial port specification + * and an action to override default or configured behavior. + */ +struct kgdb_sermap kgdb_sci_sermap = +{ "ttySC", 5, kgdb_sci_setup, NULL }; + +struct kgdb_sermap *kgdb_serlist = &kgdb_sci_sermap; +struct kgdb_sermap *kgdb_porttype = &kgdb_sci_sermap; + +void kgdb_register_sermap(struct kgdb_sermap *map) +{ + struct kgdb_sermap *last; + + for (last = kgdb_serlist; last->next; last = last->next) + ; + last->next = map; + if (!map->namelen) { + map->namelen = strlen(map->name); + } +} + +static int __init kgdb_parse_options(char *options) +{ + char c; + int baud; + + /* Check for port spec (or use default) */ + + /* Determine port type and instance */ + if (!memcmp(options, "tty", 3)) { + struct kgdb_sermap *map = kgdb_serlist; + + while (map && memcmp(options, map->name, map->namelen)) + map = map->next; + + if (!map) { + KGDB_PRINTK("unknown port spec in %s\n", options); + return -1; + } + + kgdb_porttype = map; + kgdb_serial_setup = map->setup_fn; + kgdb_portnum = options[map->namelen] - '0'; + options += map->namelen + 1; + + options = (*options == ',') ? options+1 : options; + + /* Read optional parameters (baud/parity/bits) */ + baud = simple_strtoul(options, &options, 10); + if (baud != 0) { + kgdb_baud = baud; + + c = toupper(*options); + if (c == 'E' || c == 'O' || c == 'N') { + kgdb_parity = c; + options++; + } + + c = *options; + if (c == '7' || c == '8') { + kgdb_bits = c; + options++; + } + options = (*options == ',') ? options+1 : options; + } + } + + /* Check for action specification */ + if (!memcmp(options, "halt", 4)) { + kgdb_halt = 1; + options += 4; + } else if (!memcmp(options, "disabled", 8)) { + kgdb_enabled = 0; + options += 8; + } + + if (*options) { + KGDB_PRINTK("ignored unknown options: %s\n", options); + return 0; + } + return 1; +} +__setup("kgdb=", kgdb_parse_options); +#endif /* CONFIG_SH_KGDB */ + diff --git a/arch/sh/kernel/sh_bios.c b/arch/sh/kernel/sh_bios.c new file mode 100644 index 00000000000..5b53e10bb9c --- /dev/null +++ b/arch/sh/kernel/sh_bios.c @@ -0,0 +1,75 @@ +/* + * linux/arch/sh/kernel/sh_bios.c + * C interface for trapping into the standard LinuxSH BIOS. + * + * Copyright (C) 2000 Greg Banks, Mitch Davis + * + */ + +#include <asm/sh_bios.h> + +#define BIOS_CALL_CONSOLE_WRITE 0 +#define BIOS_CALL_READ_BLOCK 1 +#define BIOS_CALL_ETH_NODE_ADDR 10 +#define BIOS_CALL_SHUTDOWN 11 +#define BIOS_CALL_CHAR_OUT 0x1f /* TODO: hack */ +#define BIOS_CALL_GDB_GET_MODE_PTR 0xfe +#define BIOS_CALL_GDB_DETACH 0xff + +static __inline__ long sh_bios_call(long func, long arg0, long arg1, long arg2, long arg3) +{ + register long r0 __asm__("r0") = func; + register long r4 __asm__("r4") = arg0; + register long r5 __asm__("r5") = arg1; + register long r6 __asm__("r6") = arg2; + register long r7 __asm__("r7") = arg3; + __asm__ __volatile__("trapa #0x3f" + : "=z" (r0) + : "0" (r0), "r" (r4), "r" (r5), "r" (r6), "r" (r7) + : "memory"); + return r0; +} + + +void sh_bios_console_write(const char *buf, unsigned int len) +{ + sh_bios_call(BIOS_CALL_CONSOLE_WRITE, (long)buf, (long)len, 0, 0); +} + + +void sh_bios_char_out(char ch) +{ + sh_bios_call(BIOS_CALL_CHAR_OUT, ch, 0, 0, 0); +} + + +int sh_bios_in_gdb_mode(void) +{ + static char queried = 0; + static char *gdb_mode_p = 0; + + if (!queried) + { + /* Query the gdb stub for address of its gdb mode variable */ + long r = sh_bios_call(BIOS_CALL_GDB_GET_MODE_PTR, 0, 0, 0, 0); + if (r != ~0) /* BIOS returns -1 for unknown function */ + gdb_mode_p = (char *)r; + queried = 1; + } + return (gdb_mode_p != 0 ? *gdb_mode_p : 0); +} + +void sh_bios_gdb_detach(void) +{ + sh_bios_call(BIOS_CALL_GDB_DETACH, 0, 0, 0, 0); +} + +void sh_bios_get_node_addr (unsigned char *node_addr) +{ + sh_bios_call(BIOS_CALL_ETH_NODE_ADDR, 0, (long)node_addr, 0, 0); +} + +void sh_bios_shutdown(unsigned int how) +{ + sh_bios_call(BIOS_CALL_SHUTDOWN, how, 0, 0, 0); +} diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c new file mode 100644 index 00000000000..6954fd62470 --- /dev/null +++ b/arch/sh/kernel/sh_ksyms.c @@ -0,0 +1,126 @@ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/smp.h> +#include <linux/user.h> +#include <linux/elfcore.h> +#include <linux/sched.h> +#include <linux/in6.h> +#include <linux/interrupt.h> +#include <linux/smp_lock.h> +#include <linux/vmalloc.h> +#include <linux/pci.h> +#include <linux/irq.h> + +#include <asm/semaphore.h> +#include <asm/processor.h> +#include <asm/uaccess.h> +#include <asm/checksum.h> +#include <asm/io.h> +#include <asm/delay.h> +#include <asm/tlbflush.h> +#include <asm/cacheflush.h> +#include <asm/checksum.h> + +extern void dump_thread(struct pt_regs *, struct user *); +extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); +extern struct hw_interrupt_type no_irq_type; + +EXPORT_SYMBOL(sh_mv); + +/* platform dependent support */ +EXPORT_SYMBOL(dump_thread); +EXPORT_SYMBOL(dump_fpu); +EXPORT_SYMBOL(iounmap); +EXPORT_SYMBOL(enable_irq); +EXPORT_SYMBOL(disable_irq); +EXPORT_SYMBOL(probe_irq_mask); +EXPORT_SYMBOL(kernel_thread); +EXPORT_SYMBOL(disable_irq_nosync); +EXPORT_SYMBOL(irq_desc); +EXPORT_SYMBOL(no_irq_type); + +EXPORT_SYMBOL(strpbrk); +EXPORT_SYMBOL(strstr); +EXPORT_SYMBOL(strlen); +EXPORT_SYMBOL(strnlen); +EXPORT_SYMBOL(strchr); +EXPORT_SYMBOL(strcat); +EXPORT_SYMBOL(strncat); + +/* PCI exports */ +#ifdef CONFIG_PCI +EXPORT_SYMBOL(pci_alloc_consistent); +EXPORT_SYMBOL(pci_free_consistent); +#endif + +/* mem exports */ +EXPORT_SYMBOL(memchr); +EXPORT_SYMBOL(memcpy); +EXPORT_SYMBOL(memcpy_fromio); +EXPORT_SYMBOL(memcpy_toio); +EXPORT_SYMBOL(memset); +EXPORT_SYMBOL(memset_io); +EXPORT_SYMBOL(memmove); +EXPORT_SYMBOL(memcmp); +EXPORT_SYMBOL(memscan); +EXPORT_SYMBOL(__copy_user); +EXPORT_SYMBOL(boot_cpu_data); + +#ifdef CONFIG_MMU +EXPORT_SYMBOL(get_vm_area); +#endif + +/* semaphore exports */ +EXPORT_SYMBOL(__up); +EXPORT_SYMBOL(__down); +EXPORT_SYMBOL(__down_interruptible); + +EXPORT_SYMBOL(__udelay); +EXPORT_SYMBOL(__ndelay); +EXPORT_SYMBOL(__const_udelay); + +EXPORT_SYMBOL(__div64_32); + +#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name) + +/* These symbols are generated by the compiler itself */ +DECLARE_EXPORT(__udivsi3); +DECLARE_EXPORT(__udivdi3); +DECLARE_EXPORT(__sdivsi3); +DECLARE_EXPORT(__ashrdi3); +DECLARE_EXPORT(__ashldi3); +DECLARE_EXPORT(__lshrdi3); +DECLARE_EXPORT(__movstr); + +EXPORT_SYMBOL(strcpy); + +#ifdef CONFIG_CPU_SH4 +DECLARE_EXPORT(__movstr_i4_even); +DECLARE_EXPORT(__movstr_i4_odd); +DECLARE_EXPORT(__movstrSI12_i4); + +/* needed by some modules */ +EXPORT_SYMBOL(flush_cache_all); +EXPORT_SYMBOL(flush_cache_range); +EXPORT_SYMBOL(flush_dcache_page); +EXPORT_SYMBOL(__flush_purge_region); +#endif + +#if defined(CONFIG_SH7705_CACHE_32KB) +EXPORT_SYMBOL(flush_cache_all); +EXPORT_SYMBOL(flush_cache_range); +EXPORT_SYMBOL(flush_dcache_page); +EXPORT_SYMBOL(__flush_purge_region); +#endif + +EXPORT_SYMBOL(flush_tlb_page); +EXPORT_SYMBOL(__down_trylock); + +#ifdef CONFIG_SMP +EXPORT_SYMBOL(synchronize_irq); +#endif + +EXPORT_SYMBOL(csum_partial); +EXPORT_SYMBOL(csum_ipv6_magic); +EXPORT_SYMBOL(consistent_sync); +EXPORT_SYMBOL(clear_page); diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c new file mode 100644 index 00000000000..06f1b47eded --- /dev/null +++ b/arch/sh/kernel/signal.c @@ -0,0 +1,607 @@ +/* + * linux/arch/sh/kernel/signal.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson + * + * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima + * + */ + +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/errno.h> +#include <linux/wait.h> +#include <linux/ptrace.h> +#include <linux/unistd.h> +#include <linux/stddef.h> +#include <linux/tty.h> +#include <linux/personality.h> +#include <linux/binfmts.h> + +#include <asm/ucontext.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/cacheflush.h> + +#define DEBUG_SIG 0 + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset); + +/* + * Atomically swap in the new signal mask, and wait for a signal. + */ +asmlinkage int +sys_sigsuspend(old_sigset_t mask, + unsigned long r5, unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + sigset_t saveset; + + mask &= _BLOCKABLE; + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + siginitset(¤t->blocked, mask); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + regs.regs[0] = -EINTR; + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + if (do_signal(®s, &saveset)) + return -EINTR; + } +} + +asmlinkage int +sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, + unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + sigset_t saveset, newset; + + /* XXX: Don't preclude handling different sized sigset_t's. */ + if (sigsetsize != sizeof(sigset_t)) + return -EINVAL; + + if (copy_from_user(&newset, unewset, sizeof(newset))) + return -EFAULT; + sigdelsetmask(&newset, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + current->blocked = newset; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + regs.regs[0] = -EINTR; + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + if (do_signal(®s, &saveset)) + return -EINTR; + } +} + +asmlinkage int +sys_sigaction(int sig, const struct old_sigaction __user *act, + struct old_sigaction __user *oact) +{ + struct k_sigaction new_ka, old_ka; + int ret; + + if (act) { + old_sigset_t mask; + if (!access_ok(VERIFY_READ, act, sizeof(*act)) || + __get_user(new_ka.sa.sa_handler, &act->sa_handler) || + __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) + return -EFAULT; + __get_user(new_ka.sa.sa_flags, &act->sa_flags); + __get_user(mask, &act->sa_mask); + siginitset(&new_ka.sa.sa_mask, mask); + } + + ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); + + if (!ret && oact) { + if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || + __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || + __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) + return -EFAULT; + __put_user(old_ka.sa.sa_flags, &oact->sa_flags); + __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); + } + + return ret; +} + +asmlinkage int +sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, + unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + return do_sigaltstack(uss, uoss, regs.regs[15]); +} + + +/* + * Do a signal return; undo the signal stack. + */ + +#define MOVW(n) (0x9300|((n)-2)) /* Move mem word at PC+n to R3 */ +#define TRAP16 0xc310 /* Syscall w/no args (NR in R3) */ +#define OR_R0_R0 0x200b /* or r0,r0 (insert to avoid hardware bug) */ + +struct sigframe +{ + struct sigcontext sc; + unsigned long extramask[_NSIG_WORDS-1]; + u16 retcode[8]; +}; + +struct rt_sigframe +{ + struct siginfo info; + struct ucontext uc; + u16 retcode[8]; +}; + +#ifdef CONFIG_SH_FPU +static inline int restore_sigcontext_fpu(struct sigcontext __user *sc) +{ + struct task_struct *tsk = current; + + if (!(cpu_data->flags & CPU_HAS_FPU)) + return 0; + + set_used_math(); + return __copy_from_user(&tsk->thread.fpu.hard, &sc->sc_fpregs[0], + sizeof(long)*(16*2+2)); +} + +static inline int save_sigcontext_fpu(struct sigcontext __user *sc, + struct pt_regs *regs) +{ + struct task_struct *tsk = current; + + if (!(cpu_data->flags & CPU_HAS_FPU)) + return 0; + + if (!used_math()) { + __put_user(0, &sc->sc_ownedfp); + return 0; + } + + __put_user(1, &sc->sc_ownedfp); + + /* This will cause a "finit" to be triggered by the next + attempted FPU operation by the 'current' process. + */ + clear_used_math(); + + unlazy_fpu(tsk, regs); + return __copy_to_user(&sc->sc_fpregs[0], &tsk->thread.fpu.hard, + sizeof(long)*(16*2+2)); +} +#endif /* CONFIG_SH_FPU */ + +static int +restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p) +{ + unsigned int err = 0; + +#define COPY(x) err |= __get_user(regs->x, &sc->sc_##x) + COPY(regs[1]); + COPY(regs[2]); COPY(regs[3]); + COPY(regs[4]); COPY(regs[5]); + COPY(regs[6]); COPY(regs[7]); + COPY(regs[8]); COPY(regs[9]); + COPY(regs[10]); COPY(regs[11]); + COPY(regs[12]); COPY(regs[13]); + COPY(regs[14]); COPY(regs[15]); + COPY(gbr); COPY(mach); + COPY(macl); COPY(pr); + COPY(sr); COPY(pc); +#undef COPY + +#ifdef CONFIG_SH_FPU + if (cpu_data->flags & CPU_HAS_FPU) { + int owned_fp; + struct task_struct *tsk = current; + + regs->sr |= SR_FD; /* Release FPU */ + clear_fpu(tsk, regs); + clear_used_math(); + __get_user (owned_fp, &sc->sc_ownedfp); + if (owned_fp) + err |= restore_sigcontext_fpu(sc); + } +#endif + + regs->tra = -1; /* disable syscall checks */ + err |= __get_user(*r0_p, &sc->sc_regs[0]); + return err; +} + +asmlinkage int sys_sigreturn(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + struct sigframe __user *frame = (struct sigframe __user *)regs.regs[15]; + sigset_t set; + int r0; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + + if (__get_user(set.sig[0], &frame->sc.oldmask) + || (_NSIG_WORDS > 1 + && __copy_from_user(&set.sig[1], &frame->extramask, + sizeof(frame->extramask)))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(®s, &frame->sc, &r0)) + goto badframe; + return r0; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs.regs[15]; + sigset_t set; + stack_t st; + int r0; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(®s, &frame->uc.uc_mcontext, &r0)) + goto badframe; + + if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st))) + goto badframe; + /* It is more difficult to avoid calling this function than to + call it and ignore errors. */ + do_sigaltstack(&st, NULL, regs.regs[15]); + + return r0; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +/* + * Set up a signal frame. + */ + +static int +setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, + unsigned long mask) +{ + int err = 0; + +#define COPY(x) err |= __put_user(regs->x, &sc->sc_##x) + COPY(regs[0]); COPY(regs[1]); + COPY(regs[2]); COPY(regs[3]); + COPY(regs[4]); COPY(regs[5]); + COPY(regs[6]); COPY(regs[7]); + COPY(regs[8]); COPY(regs[9]); + COPY(regs[10]); COPY(regs[11]); + COPY(regs[12]); COPY(regs[13]); + COPY(regs[14]); COPY(regs[15]); + COPY(gbr); COPY(mach); + COPY(macl); COPY(pr); + COPY(sr); COPY(pc); +#undef COPY + +#ifdef CONFIG_SH_FPU + err |= save_sigcontext_fpu(sc, regs); +#endif + + /* non-iBCS2 extensions.. */ + err |= __put_user(mask, &sc->oldmask); + + return err; +} + +/* + * Determine which stack to use.. + */ +static inline void __user * +get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) +{ + if (ka->sa.sa_flags & SA_ONSTACK) { + if (sas_ss_flags(sp) == 0) + sp = current->sas_ss_sp + current->sas_ss_size; + } + + return (void __user *)((sp - frame_size) & -8ul); +} + +static void setup_frame(int sig, struct k_sigaction *ka, + sigset_t *set, struct pt_regs *regs) +{ + struct sigframe __user *frame; + int err = 0; + int signal; + + frame = get_sigframe(ka, regs->regs[15], sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + signal = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err |= setup_sigcontext(&frame->sc, regs, set->sig[0]); + + if (_NSIG_WORDS > 1) { + err |= __copy_to_user(frame->extramask, &set->sig[1], + sizeof(frame->extramask)); + } + + /* Set up to return from userspace. If provided, use a stub + already in userspace. */ + if (ka->sa.sa_flags & SA_RESTORER) { + regs->pr = (unsigned long) ka->sa.sa_restorer; + } else { + /* Generate return code (system call to sigreturn) */ + err |= __put_user(MOVW(7), &frame->retcode[0]); + err |= __put_user(TRAP16, &frame->retcode[1]); + err |= __put_user(OR_R0_R0, &frame->retcode[2]); + err |= __put_user(OR_R0_R0, &frame->retcode[3]); + err |= __put_user(OR_R0_R0, &frame->retcode[4]); + err |= __put_user(OR_R0_R0, &frame->retcode[5]); + err |= __put_user(OR_R0_R0, &frame->retcode[6]); + err |= __put_user((__NR_sigreturn), &frame->retcode[7]); + regs->pr = (unsigned long) frame->retcode; + } + + if (err) + goto give_sigsegv; + + /* Set up registers for signal handler */ + regs->regs[15] = (unsigned long) frame; + regs->regs[4] = signal; /* Arg for signal handler */ + regs->regs[5] = 0; + regs->regs[6] = (unsigned long) &frame->sc; + regs->pc = (unsigned long) ka->sa.sa_handler; + + set_fs(USER_DS); + +#if DEBUG_SIG + printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", + current->comm, current->pid, frame, regs->pc, regs->pr); +#endif + + flush_cache_sigtramp(regs->pr); + if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) + flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); + return; + +give_sigsegv: + force_sigsegv(sig, current); +} + +static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs) +{ + struct rt_sigframe __user *frame; + int err = 0; + int signal; + + frame = get_sigframe(ka, regs->regs[15], sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + signal = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err |= copy_siginfo_to_user(&frame->info, info); + + /* Create the ucontext. */ + err |= __put_user(0, &frame->uc.uc_flags); + err |= __put_user(0, &frame->uc.uc_link); + err |= __put_user((void *)current->sas_ss_sp, + &frame->uc.uc_stack.ss_sp); + err |= __put_user(sas_ss_flags(regs->regs[15]), + &frame->uc.uc_stack.ss_flags); + err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= setup_sigcontext(&frame->uc.uc_mcontext, + regs, set->sig[0]); + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + /* Set up to return from userspace. If provided, use a stub + already in userspace. */ + if (ka->sa.sa_flags & SA_RESTORER) { + regs->pr = (unsigned long) ka->sa.sa_restorer; + } else { + /* Generate return code (system call to rt_sigreturn) */ + err |= __put_user(MOVW(7), &frame->retcode[0]); + err |= __put_user(TRAP16, &frame->retcode[1]); + err |= __put_user(OR_R0_R0, &frame->retcode[2]); + err |= __put_user(OR_R0_R0, &frame->retcode[3]); + err |= __put_user(OR_R0_R0, &frame->retcode[4]); + err |= __put_user(OR_R0_R0, &frame->retcode[5]); + err |= __put_user(OR_R0_R0, &frame->retcode[6]); + err |= __put_user((__NR_rt_sigreturn), &frame->retcode[7]); + regs->pr = (unsigned long) frame->retcode; + } + + if (err) + goto give_sigsegv; + + /* Set up registers for signal handler */ + regs->regs[15] = (unsigned long) frame; + regs->regs[4] = signal; /* Arg for signal handler */ + regs->regs[5] = (unsigned long) &frame->info; + regs->regs[6] = (unsigned long) &frame->uc; + regs->pc = (unsigned long) ka->sa.sa_handler; + + set_fs(USER_DS); + +#if DEBUG_SIG + printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", + current->comm, current->pid, frame, regs->pc, regs->pr); +#endif + + flush_cache_sigtramp(regs->pr); + if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) + flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); + return; + +give_sigsegv: + force_sigsegv(sig, current); +} + +/* + * OK, we're invoking a handler + */ + +static void +handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *oldset, struct pt_regs *regs) +{ + /* Are we from a system call? */ + if (regs->tra >= 0) { + /* If so, check system call restarting.. */ + switch (regs->regs[0]) { + case -ERESTARTNOHAND: + regs->regs[0] = -EINTR; + break; + + case -ERESTARTSYS: + if (!(ka->sa.sa_flags & SA_RESTART)) { + regs->regs[0] = -EINTR; + break; + } + /* fallthrough */ + case -ERESTARTNOINTR: + regs->pc -= 2; + } + } else { + /* gUSA handling */ +#ifdef CONFIG_PREEMPT + unsigned long flags; + + local_irq_save(flags); +#endif + if (regs->regs[15] >= 0xc0000000) { + int offset = (int)regs->regs[15]; + + /* Reset stack pointer: clear critical region mark */ + regs->regs[15] = regs->regs[1]; + if (regs->pc < regs->regs[0]) + /* Go to rewind point #1 */ + regs->pc = regs->regs[0] + offset - 2; + } +#ifdef CONFIG_PREEMPT + local_irq_restore(flags); +#endif + } + + /* Set up the stack frame */ + if (ka->sa.sa_flags & SA_SIGINFO) + setup_rt_frame(sig, ka, info, oldset, regs); + else + setup_frame(sig, ka, oldset, regs); + + if (ka->sa.sa_flags & SA_ONESHOT) + ka->sa.sa_handler = SIG_DFL; + + if (!(ka->sa.sa_flags & SA_NODEFER)) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + sigaddset(¤t->blocked,sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } +} + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + * + * Note that we go through the signals twice: once to check the signals that + * the kernel can handle, and then we build all the user-level signal handling + * stack-frames in one go after that. + */ +int do_signal(struct pt_regs *regs, sigset_t *oldset) +{ + siginfo_t info; + int signr; + struct k_sigaction ka; + + /* + * We want the common case to go fast, which + * is why we may in certain cases get here from + * kernel mode. Just return without doing anything + * if so. + */ + if (!user_mode(regs)) + return 1; + + if (try_to_freeze(0)) + goto no_signal; + + if (!oldset) + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); + if (signr > 0) { + /* Whee! Actually deliver the signal. */ + handle_signal(signr, &ka, &info, oldset, regs); + return 1; + } + + no_signal: + /* Did we come from a system call? */ + if (regs->tra >= 0) { + /* Restart the system call - no handlers present */ + if (regs->regs[0] == -ERESTARTNOHAND || + regs->regs[0] == -ERESTARTSYS || + regs->regs[0] == -ERESTARTNOINTR || + regs->regs[0] == -ERESTART_RESTARTBLOCK) { + regs->pc -= 2; + } + } + return 0; +} diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c new file mode 100644 index 00000000000..56a39d69e08 --- /dev/null +++ b/arch/sh/kernel/smp.c @@ -0,0 +1,199 @@ +/* + * arch/sh/kernel/smp.c + * + * SMP support for the SuperH processors. + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/config.h> +#include <linux/cache.h> +#include <linux/cpumask.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/threads.h> +#include <linux/module.h> +#include <linux/time.h> +#include <linux/timex.h> +#include <linux/sched.h> + +#include <asm/atomic.h> +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/mmu_context.h> +#include <asm/smp.h> + +/* + * This was written with the Sega Saturn (SMP SH-2 7604) in mind, + * but is designed to be usable regardless if there's an MMU + * present or not. + */ +struct sh_cpuinfo cpu_data[NR_CPUS]; + +extern void per_cpu_trap_init(void); + +cpumask_t cpu_possible_map; +cpumask_t cpu_online_map; +static atomic_t cpus_booted = ATOMIC_INIT(0); + +/* These are defined by the board-specific code. */ + +/* + * Cause the function described by call_data to be executed on the passed + * cpu. When the function has finished, increment the finished field of + * call_data. + */ +void __smp_send_ipi(unsigned int cpu, unsigned int action); + +/* + * Find the number of available processors + */ +unsigned int __smp_probe_cpus(void); + +/* + * Start a particular processor + */ +void __smp_slave_init(unsigned int cpu); + +/* + * Run specified function on a particular processor. + */ +void __smp_call_function(unsigned int cpu); + +static inline void __init smp_store_cpu_info(unsigned int cpu) +{ + cpu_data[cpu].loops_per_jiffy = loops_per_jiffy; +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int cpu = smp_processor_id(); + int i; + + atomic_set(&cpus_booted, 1); + smp_store_cpu_info(cpu); + + for (i = 0; i < __smp_probe_cpus(); i++) + cpu_set(i, cpu_possible_map); +} + +void __devinit smp_prepare_boot_cpu(void) +{ + unsigned int cpu = smp_processor_id(); + + cpu_set(cpu, cpu_online_map); + cpu_set(cpu, cpu_possible_map); +} + +int __cpu_up(unsigned int cpu) +{ + struct task_struct *tsk; + + tsk = fork_idle(cpu); + + if (IS_ERR(tsk)) + panic("Failed forking idle task for cpu %d\n", cpu); + + tsk->thread_info->cpu = cpu; + + cpu_set(cpu, cpu_online_map); + + return 0; +} + +int start_secondary(void *unused) +{ + unsigned int cpu = smp_processor_id(); + + atomic_inc(&init_mm.mm_count); + current->active_mm = &init_mm; + + smp_store_cpu_info(cpu); + + __smp_slave_init(cpu); + per_cpu_trap_init(); + + atomic_inc(&cpus_booted); + + cpu_idle(); + return 0; +} + +void __init smp_cpus_done(unsigned int max_cpus) +{ + smp_mb(); +} + +void smp_send_reschedule(int cpu) +{ + __smp_send_ipi(cpu, SMP_MSG_RESCHEDULE); +} + +static void stop_this_cpu(void *unused) +{ + cpu_clear(smp_processor_id(), cpu_online_map); + local_irq_disable(); + + for (;;) + cpu_relax(); +} + +void smp_send_stop(void) +{ + smp_call_function(stop_this_cpu, 0, 1, 0); +} + + +struct smp_fn_call_struct smp_fn_call = { + .lock = SPIN_LOCK_UNLOCKED, + .finished = ATOMIC_INIT(0), +}; + +/* + * The caller of this wants the passed function to run on every cpu. If wait + * is set, wait until all cpus have finished the function before returning. + * The lock is here to protect the call structure. + * You must not call this function with disabled interrupts or from a + * hardware interrupt handler or from a bottom half handler. + */ +int smp_call_function(void (*func)(void *info), void *info, int retry, int wait) +{ + unsigned int nr_cpus = atomic_read(&cpus_booted); + int i; + + if (nr_cpus < 2) + return 0; + + /* Can deadlock when called with interrupts disabled */ + WARN_ON(irqs_disabled()); + + spin_lock(&smp_fn_call.lock); + + atomic_set(&smp_fn_call.finished, 0); + smp_fn_call.fn = func; + smp_fn_call.data = info; + + for (i = 0; i < nr_cpus; i++) + if (i != smp_processor_id()) + __smp_call_function(i); + + if (wait) + while (atomic_read(&smp_fn_call.finished) != (nr_cpus - 1)); + + spin_unlock(&smp_fn_call.lock); + + return 0; +} + +/* Not really SMP stuff ... */ +int setup_profiling_timer(unsigned int multiplier) +{ + return 0; +} + diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c new file mode 100644 index 00000000000..df5ac294c37 --- /dev/null +++ b/arch/sh/kernel/sys_sh.c @@ -0,0 +1,289 @@ +/* + * linux/arch/sh/kernel/sys_sh.c + * + * This file contains various random system calls that + * have a non-standard calling sequence on the Linux/SuperH + * platform. + * + * Taken from i386 version. + */ + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/sem.h> +#include <linux/msg.h> +#include <linux/shm.h> +#include <linux/stat.h> +#include <linux/syscalls.h> +#include <linux/mman.h> +#include <linux/file.h> +#include <linux/utsname.h> + +#include <asm/uaccess.h> +#include <asm/ipc.h> + +/* + * sys_pipe() is the normal C calling standard for creating + * a pipe. It's not the way Unix traditionally does this, though. + */ +asmlinkage int sys_pipe(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + int fd[2]; + int error; + + error = do_pipe(fd); + if (!error) { + regs.regs[1] = fd[1]; + return fd[0]; + } + return error; +} + +#if defined(HAVE_ARCH_UNMAPPED_AREA) +/* + * To avoid cache alias, we map the shard page with same color. + */ +#define COLOUR_ALIGN(addr) (((addr)+SHMLBA-1)&~(SHMLBA-1)) + +unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + unsigned long start_addr; + + if (flags & MAP_FIXED) { + /* We do not accept a shared mapping if it would violate + * cache aliasing constraints. + */ + if ((flags & MAP_SHARED) && (addr & (SHMLBA - 1))) + return -EINVAL; + return addr; + } + + if (len > TASK_SIZE) + return -ENOMEM; + + if (addr) { + if (flags & MAP_PRIVATE) + addr = PAGE_ALIGN(addr); + else + addr = COLOUR_ALIGN(addr); + vma = find_vma(mm, addr); + if (TASK_SIZE - len >= addr && + (!vma || addr + len <= vma->vm_start)) + return addr; + } + if (flags & MAP_PRIVATE) + addr = PAGE_ALIGN(mm->free_area_cache); + else + addr = COLOUR_ALIGN(mm->free_area_cache); + start_addr = addr; + +full_search: + for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { + /* At this point: (!vma || addr < vma->vm_end). */ + if (TASK_SIZE - len < addr) { + /* + * Start a new search - just in case we missed + * some holes. + */ + if (start_addr != TASK_UNMAPPED_BASE) { + start_addr = addr = TASK_UNMAPPED_BASE; + goto full_search; + } + return -ENOMEM; + } + if (!vma || addr + len <= vma->vm_start) { + /* + * Remember the place where we stopped the search: + */ + mm->free_area_cache = addr + len; + return addr; + } + addr = vma->vm_end; + if (!(flags & MAP_PRIVATE)) + addr = COLOUR_ALIGN(addr); + } +} +#endif + +static inline long +do_mmap2(unsigned long addr, unsigned long len, unsigned long prot, + unsigned long flags, int fd, unsigned long pgoff) +{ + int error = -EBADF; + struct file *file = NULL; + + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + if (!(flags & MAP_ANONYMOUS)) { + file = fget(fd); + if (!file) + goto out; + } + + down_write(¤t->mm->mmap_sem); + error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); + up_write(¤t->mm->mmap_sem); + + if (file) + fput(file); +out: + return error; +} + +asmlinkage int old_mmap(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + int fd, unsigned long off) +{ + if (off & ~PAGE_MASK) + return -EINVAL; + return do_mmap2(addr, len, prot, flags, fd, off>>PAGE_SHIFT); +} + +asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff) +{ + return do_mmap2(addr, len, prot, flags, fd, pgoff); +} + +/* + * sys_ipc() is the de-multiplexer for the SysV IPC calls.. + * + * This is really horribly ugly. + */ +asmlinkage int sys_ipc(uint call, int first, int second, + int third, void __user *ptr, long fifth) +{ + int version, ret; + + version = call >> 16; /* hack for backward compatibility */ + call &= 0xffff; + + if (call <= SEMCTL) + switch (call) { + case SEMOP: + return sys_semtimedop(first, (struct sembuf __user *)ptr, + second, NULL); + case SEMTIMEDOP: + return sys_semtimedop(first, (struct sembuf __user *)ptr, + second, + (const struct timespec __user *)fifth); + case SEMGET: + return sys_semget (first, second, third); + case SEMCTL: { + union semun fourth; + if (!ptr) + return -EINVAL; + if (get_user(fourth.__pad, (void * __user *) ptr)) + return -EFAULT; + return sys_semctl (first, second, third, fourth); + } + default: + return -EINVAL; + } + + if (call <= MSGCTL) + switch (call) { + case MSGSND: + return sys_msgsnd (first, (struct msgbuf __user *) ptr, + second, third); + case MSGRCV: + switch (version) { + case 0: { + struct ipc_kludge tmp; + if (!ptr) + return -EINVAL; + + if (copy_from_user(&tmp, + (struct ipc_kludge __user *) ptr, + sizeof (tmp))) + return -EFAULT; + return sys_msgrcv (first, tmp.msgp, second, + tmp.msgtyp, third); + } + default: + return sys_msgrcv (first, + (struct msgbuf __user *) ptr, + second, fifth, third); + } + case MSGGET: + return sys_msgget ((key_t) first, second); + case MSGCTL: + return sys_msgctl (first, second, + (struct msqid_ds __user *) ptr); + default: + return -EINVAL; + } + if (call <= SHMCTL) + switch (call) { + case SHMAT: + switch (version) { + default: { + ulong raddr; + ret = do_shmat (first, (char __user *) ptr, + second, &raddr); + if (ret) + return ret; + return put_user (raddr, (ulong __user *) third); + } + case 1: /* iBCS2 emulator entry point */ + if (!segment_eq(get_fs(), get_ds())) + return -EINVAL; + return do_shmat (first, (char __user *) ptr, + second, (ulong *) third); + } + case SHMDT: + return sys_shmdt ((char __user *)ptr); + case SHMGET: + return sys_shmget (first, second, third); + case SHMCTL: + return sys_shmctl (first, second, + (struct shmid_ds __user *) ptr); + default: + return -EINVAL; + } + + return -EINVAL; +} + +asmlinkage int sys_uname(struct old_utsname * name) +{ + int err; + if (!name) + return -EFAULT; + down_read(&uts_sem); + err=copy_to_user(name, &system_utsname, sizeof (*name)); + up_read(&uts_sem); + return err?-EFAULT:0; +} + +asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char * buf, + size_t count, long dummy, loff_t pos) +{ + return sys_pread64(fd, buf, count, pos); +} + +asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char * buf, + size_t count, long dummy, loff_t pos) +{ + return sys_pwrite64(fd, buf, count, pos); +} + +asmlinkage int sys_fadvise64_64_wrapper(int fd, u32 offset0, u32 offset1, + u32 len0, u32 len1, int advice) +{ +#ifdef __LITTLE_ENDIAN__ + return sys_fadvise64_64(fd, (u64)offset1 << 32 | offset0, + (u64)len1 << 32 | len0, advice); +#else + return sys_fadvise64_64(fd, (u64)offset0 << 32 | offset1, + (u64)len0 << 32 | len1, advice); +#endif +} diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c new file mode 100644 index 00000000000..df7a9b9d4cb --- /dev/null +++ b/arch/sh/kernel/time.c @@ -0,0 +1,657 @@ +/* + * arch/sh/kernel/time.c + * + * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka + * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> + * Copyright (C) 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org> + * + * Some code taken from i386 version. + * Copyright (C) 1991, 1992, 1995 Linus Torvalds + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/profile.h> + +#include <asm/processor.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/delay.h> +#include <asm/machvec.h> +#include <asm/rtc.h> +#include <asm/freq.h> +#include <asm/cpu/timer.h> +#ifdef CONFIG_SH_KGDB +#include <asm/kgdb.h> +#endif + +#include <linux/timex.h> +#include <linux/irq.h> + +#define TMU_TOCR_INIT 0x00 +#define TMU0_TCR_INIT 0x0020 +#define TMU_TSTR_INIT 1 + +#define TMU0_TCR_CALIB 0x0000 + +#ifdef CONFIG_CPU_SUBTYPE_ST40STB1 +#define CLOCKGEN_MEMCLKCR 0xbb040038 +#define MEMCLKCR_RATIO_MASK 0x7 +#endif /* CONFIG_CPU_SUBTYPE_ST40STB1 */ + +extern unsigned long wall_jiffies; +#define TICK_SIZE (tick_nsec / 1000) +DEFINE_SPINLOCK(tmu0_lock); + +u64 jiffies_64 = INITIAL_JIFFIES; + +EXPORT_SYMBOL(jiffies_64); + +/* XXX: Can we initialize this in a routine somewhere? Dreamcast doesn't want + * these routines anywhere... */ +#ifdef CONFIG_SH_RTC +void (*rtc_get_time)(struct timespec *) = sh_rtc_gettimeofday; +int (*rtc_set_time)(const time_t) = sh_rtc_settimeofday; +#else +void (*rtc_get_time)(struct timespec *); +int (*rtc_set_time)(const time_t); +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7300) +static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 }; +#endif +#if defined(CONFIG_CPU_SH3) +static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 }; +static int stc_values[] = { 0, 1, 4, 2, 5, 0, 0, 0 }; +#define bfc_divisors stc_multipliers +#define bfc_values stc_values +static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 }; +static int ifc_values[] = { 0, 1, 4, 2, 0, 0, 0, 0 }; +static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 }; +static int pfc_values[] = { 0, 1, 4, 2, 5, 0, 0, 0 }; +#elif defined(CONFIG_CPU_SH4) +#if defined(CONFIG_CPU_SUBTYPE_SH73180) +static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 12, 16 }; +static int ifc_values[] = { 0, 1, 2, 3, 4, 5, 6, 7 }; +#define bfc_divisors ifc_divisors /* Same */ +#define bfc_values ifc_values +#define pfc_divisors ifc_divisors /* Same */ +#define pfc_values ifc_values +#else +static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 1, 1 }; +static int ifc_values[] = { 0, 1, 2, 3, 0, 4, 0, 5 }; +#define bfc_divisors ifc_divisors /* Same */ +#define bfc_values ifc_values +static int pfc_divisors[] = { 2, 3, 4, 6, 8, 2, 2, 2 }; +static int pfc_values[] = { 0, 0, 1, 2, 0, 3, 0, 4 }; +#endif +#else +#error "Unknown ifc/bfc/pfc/stc values for this processor" +#endif + +/* + * Scheduler clock - returns current time in nanosec units. + */ +unsigned long long sched_clock(void) +{ + return (unsigned long long)jiffies * (1000000000 / HZ); +} + +static unsigned long do_gettimeoffset(void) +{ + int count; + unsigned long flags; + + static int count_p = 0x7fffffff; /* for the first call after boot */ + static unsigned long jiffies_p = 0; + + /* + * cache volatile jiffies temporarily; we have IRQs turned off. + */ + unsigned long jiffies_t; + + spin_lock_irqsave(&tmu0_lock, flags); + /* timer count may underflow right here */ + count = ctrl_inl(TMU0_TCNT); /* read the latched count */ + + jiffies_t = jiffies; + + /* + * avoiding timer inconsistencies (they are rare, but they happen)... + * there is one kind of problem that must be avoided here: + * 1. the timer counter underflows + */ + + if( jiffies_t == jiffies_p ) { + if( count > count_p ) { + /* the nutcase */ + + if(ctrl_inw(TMU0_TCR) & 0x100) { /* Check UNF bit */ + /* + * We cannot detect lost timer interrupts ... + * well, that's why we call them lost, don't we? :) + * [hmm, on the Pentium and Alpha we can ... sort of] + */ + count -= LATCH; + } else { + printk("do_slow_gettimeoffset(): hardware timer problem?\n"); + } + } + } else + jiffies_p = jiffies_t; + + count_p = count; + spin_unlock_irqrestore(&tmu0_lock, flags); + + count = ((LATCH-1) - count) * TICK_SIZE; + count = (count + LATCH/2) / LATCH; + + return count; +} + +void do_gettimeofday(struct timeval *tv) +{ + unsigned long seq; + unsigned long usec, sec; + unsigned long lost; + + do { + seq = read_seqbegin(&xtime_lock); + usec = do_gettimeoffset(); + + lost = jiffies - wall_jiffies; + if (lost) + usec += lost * (1000000 / HZ); + + sec = xtime.tv_sec; + usec += xtime.tv_nsec / 1000; + } while (read_seqretry(&xtime_lock, seq)); + + while (usec >= 1000000) { + usec -= 1000000; + sec++; + } + + tv->tv_sec = sec; + tv->tv_usec = usec; +} + +EXPORT_SYMBOL(do_gettimeofday); + +int do_settimeofday(struct timespec *tv) +{ + time_t wtm_sec, sec = tv->tv_sec; + long wtm_nsec, nsec = tv->tv_nsec; + + if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) + return -EINVAL; + + write_seqlock_irq(&xtime_lock); + /* + * This is revolting. We need to set "xtime" correctly. However, the + * value in this location is the value at the most recent update of + * wall time. Discover what correction gettimeofday() would have + * made, and then undo it! + */ + nsec -= 1000 * (do_gettimeoffset() + + (jiffies - wall_jiffies) * (1000000 / HZ)); + + wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); + wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); + + set_normalized_timespec(&xtime, sec, nsec); + set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); + + time_adjust = 0; /* stop active adjtime() */ + time_status |= STA_UNSYNC; + time_maxerror = NTP_PHASE_LIMIT; + time_esterror = NTP_PHASE_LIMIT; + write_sequnlock_irq(&xtime_lock); + clock_was_set(); + + return 0; +} + +EXPORT_SYMBOL(do_settimeofday); + +/* last time the RTC clock got updated */ +static long last_rtc_update; + +/* + * timer_interrupt() needs to keep up the real-time clock, + * as well as call the "do_timer()" routine every clocktick + */ +static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + do_timer(regs); +#ifndef CONFIG_SMP + update_process_times(user_mode(regs)); +#endif + profile_tick(CPU_PROFILING, regs); + +#ifdef CONFIG_HEARTBEAT + if (sh_mv.mv_heartbeat != NULL) + sh_mv.mv_heartbeat(); +#endif + + /* + * If we have an externally synchronized Linux clock, then update + * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be + * called as close as possible to 500 ms before the new second starts. + */ + if ((time_status & STA_UNSYNC) == 0 && + xtime.tv_sec > last_rtc_update + 660 && + (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && + (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { + if (rtc_set_time(xtime.tv_sec) == 0) + last_rtc_update = xtime.tv_sec; + else + last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */ + } +} + +/* + * This is the same as the above, except we _also_ save the current + * Time Stamp Counter value at the time of the timer interrupt, so that + * we later on can estimate the time of day more exactly. + */ +static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned long timer_status; + + /* Clear UNF bit */ + timer_status = ctrl_inw(TMU0_TCR); + timer_status &= ~0x100; + ctrl_outw(timer_status, TMU0_TCR); + + /* + * Here we are in the timer irq handler. We just have irqs locally + * disabled but we don't know if the timer_bh is running on the other + * CPU. We need to avoid to SMP race with it. NOTE: we don' t need + * the irq version of write_lock because as just said we have irq + * locally disabled. -arca + */ + write_seqlock(&xtime_lock); + do_timer_interrupt(irq, NULL, regs); + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +/* + * Hah! We'll see if this works (switching from usecs to nsecs). + */ +static unsigned int __init get_timer_frequency(void) +{ + u32 freq; + struct timespec ts1, ts2; + unsigned long diff_nsec; + unsigned long factor; + + /* Setup the timer: We don't want to generate interrupts, just + * have it count down at its natural rate. + */ + ctrl_outb(0, TMU_TSTR); +#if !defined(CONFIG_CPU_SUBTYPE_SH7300) + ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); +#endif + ctrl_outw(TMU0_TCR_CALIB, TMU0_TCR); + ctrl_outl(0xffffffff, TMU0_TCOR); + ctrl_outl(0xffffffff, TMU0_TCNT); + + rtc_get_time(&ts2); + + do { + rtc_get_time(&ts1); + } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); + + /* actually start the timer */ + ctrl_outb(TMU_TSTR_INIT, TMU_TSTR); + + do { + rtc_get_time(&ts2); + } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); + + freq = 0xffffffff - ctrl_inl(TMU0_TCNT); + if (ts2.tv_nsec < ts1.tv_nsec) { + ts2.tv_nsec += 1000000000; + ts2.tv_sec--; + } + + diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec); + + /* this should work well if the RTC has a precision of n Hz, where + * n is an integer. I don't think we have to worry about the other + * cases. */ + factor = (1000000000 + diff_nsec/2) / diff_nsec; + + if (factor * diff_nsec > 1100000000 || + factor * diff_nsec < 900000000) + panic("weird RTC (diff_nsec %ld)", diff_nsec); + + return freq * factor; +} + +void (*board_time_init)(void); +void (*board_timer_setup)(struct irqaction *irq); + +static unsigned int sh_pclk_freq __initdata = CONFIG_SH_PCLK_FREQ; + +static int __init sh_pclk_setup(char *str) +{ + unsigned int freq; + + if (get_option(&str, &freq)) + sh_pclk_freq = freq; + + return 1; +} +__setup("sh_pclk=", sh_pclk_setup); + +static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL}; + +void get_current_frequency_divisors(unsigned int *ifc, unsigned int *bfc, unsigned int *pfc) +{ + unsigned int frqcr = ctrl_inw(FRQCR); + +#if defined(CONFIG_CPU_SH3) +#if defined(CONFIG_CPU_SUBTYPE_SH7300) + *ifc = md_table[((frqcr & 0x0070) >> 4)]; + *bfc = md_table[((frqcr & 0x0700) >> 8)]; + *pfc = md_table[frqcr & 0x0007]; +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) + *bfc = stc_multipliers[(frqcr & 0x0300) >> 8]; + *ifc = ifc_divisors[(frqcr & 0x0030) >> 4]; + *pfc = pfc_divisors[frqcr & 0x0003]; +#else + unsigned int tmp; + + tmp = (frqcr & 0x8000) >> 13; + tmp |= (frqcr & 0x0030) >> 4; + *bfc = stc_multipliers[tmp]; + tmp = (frqcr & 0x4000) >> 12; + tmp |= (frqcr & 0x000c) >> 2; + *ifc = ifc_divisors[tmp]; + tmp = (frqcr & 0x2000) >> 11; + tmp |= frqcr & 0x0003; + *pfc = pfc_divisors[tmp]; +#endif +#elif defined(CONFIG_CPU_SH4) +#if defined(CONFIG_CPU_SUBTYPE_SH73180) + *ifc = ifc_divisors[(frqcr>> 20) & 0x0007]; + *bfc = bfc_divisors[(frqcr>> 12) & 0x0007]; + *pfc = pfc_divisors[frqcr & 0x0007]; +#else + *ifc = ifc_divisors[(frqcr >> 6) & 0x0007]; + *bfc = bfc_divisors[(frqcr >> 3) & 0x0007]; + *pfc = pfc_divisors[frqcr & 0x0007]; +#endif +#endif +} + +/* + * This bit of ugliness builds up accessor routines to get at both + * the divisors and the physical values. + */ +#define _FREQ_TABLE(x) \ + unsigned int get_##x##_divisor(unsigned int value) \ + { return x##_divisors[value]; } \ + \ + unsigned int get_##x##_value(unsigned int divisor) \ + { return x##_values[(divisor - 1)]; } + +_FREQ_TABLE(ifc); +_FREQ_TABLE(bfc); +_FREQ_TABLE(pfc); + +#ifdef CONFIG_CPU_SUBTYPE_ST40STB1 + +/* + * The ST40 divisors are totally different so we set the cpu data + * clocks using a different algorithm + * + * I've just plugged this from the 2.4 code + * - Alex Bennee <kernel-hacker@bennee.com> + */ +#define CCN_PVR_CHIP_SHIFT 24 +#define CCN_PVR_CHIP_MASK 0xff +#define CCN_PVR_CHIP_ST40STB1 0x4 + + +struct frqcr_data { + unsigned short frqcr; + + struct { + unsigned char multiplier; + unsigned char divisor; + } factor[3]; +}; + +static struct frqcr_data st40_frqcr_table[] = { + { 0x000, {{1,1}, {1,1}, {1,2}}}, + { 0x002, {{1,1}, {1,1}, {1,4}}}, + { 0x004, {{1,1}, {1,1}, {1,8}}}, + { 0x008, {{1,1}, {1,2}, {1,2}}}, + { 0x00A, {{1,1}, {1,2}, {1,4}}}, + { 0x00C, {{1,1}, {1,2}, {1,8}}}, + { 0x011, {{1,1}, {2,3}, {1,6}}}, + { 0x013, {{1,1}, {2,3}, {1,3}}}, + { 0x01A, {{1,1}, {1,2}, {1,4}}}, + { 0x01C, {{1,1}, {1,2}, {1,8}}}, + { 0x023, {{1,1}, {2,3}, {1,3}}}, + { 0x02C, {{1,1}, {1,2}, {1,8}}}, + { 0x048, {{1,2}, {1,2}, {1,4}}}, + { 0x04A, {{1,2}, {1,2}, {1,6}}}, + { 0x04C, {{1,2}, {1,2}, {1,8}}}, + { 0x05A, {{1,2}, {1,3}, {1,6}}}, + { 0x05C, {{1,2}, {1,3}, {1,6}}}, + { 0x063, {{1,2}, {1,4}, {1,4}}}, + { 0x06C, {{1,2}, {1,4}, {1,8}}}, + { 0x091, {{1,3}, {1,3}, {1,6}}}, + { 0x093, {{1,3}, {1,3}, {1,6}}}, + { 0x0A3, {{1,3}, {1,6}, {1,6}}}, + { 0x0DA, {{1,4}, {1,4}, {1,8}}}, + { 0x0DC, {{1,4}, {1,4}, {1,8}}}, + { 0x0EC, {{1,4}, {1,8}, {1,8}}}, + { 0x123, {{1,4}, {1,4}, {1,8}}}, + { 0x16C, {{1,4}, {1,8}, {1,8}}}, +}; + +struct memclk_data { + unsigned char multiplier; + unsigned char divisor; +}; + +static struct memclk_data st40_memclk_table[8] = { + {1,1}, // 000 + {1,2}, // 001 + {1,3}, // 010 + {2,3}, // 011 + {1,4}, // 100 + {1,6}, // 101 + {1,8}, // 110 + {1,8} // 111 +}; + +static void st40_specific_time_init(unsigned int module_clock, unsigned short frqcr) +{ + unsigned int cpu_clock, master_clock, bus_clock, memory_clock; + struct frqcr_data *d; + int a; + unsigned long memclkcr; + struct memclk_data *e; + + for (a = 0; a < ARRAY_SIZE(st40_frqcr_table); a++) { + d = &st40_frqcr_table[a]; + + if (d->frqcr == (frqcr & 0x1ff)) + break; + } + + if (a == ARRAY_SIZE(st40_frqcr_table)) { + d = st40_frqcr_table; + + printk("ERROR: Unrecognised FRQCR value (0x%x), " + "using default multipliers\n", frqcr); + } + + memclkcr = ctrl_inl(CLOCKGEN_MEMCLKCR); + e = &st40_memclk_table[memclkcr & MEMCLKCR_RATIO_MASK]; + + printk(KERN_INFO "Clock multipliers: CPU: %d/%d Bus: %d/%d " + "Mem: %d/%d Periph: %d/%d\n", + d->factor[0].multiplier, d->factor[0].divisor, + d->factor[1].multiplier, d->factor[1].divisor, + e->multiplier, e->divisor, + d->factor[2].multiplier, d->factor[2].divisor); + + master_clock = module_clock * d->factor[2].divisor + / d->factor[2].multiplier; + bus_clock = master_clock * d->factor[1].multiplier + / d->factor[1].divisor; + memory_clock = master_clock * e->multiplier + / e->divisor; + cpu_clock = master_clock * d->factor[0].multiplier + / d->factor[0].divisor; + + current_cpu_data.cpu_clock = cpu_clock; + current_cpu_data.master_clock = master_clock; + current_cpu_data.bus_clock = bus_clock; + current_cpu_data.memory_clock = memory_clock; + current_cpu_data.module_clock = module_clock; +} +#endif + +void __init time_init(void) +{ + unsigned int timer_freq = 0; + unsigned int ifc, pfc, bfc; + unsigned long interval; +#ifdef CONFIG_CPU_SUBTYPE_ST40STB1 + unsigned long pvr; + unsigned short frqcr; +#endif + + if (board_time_init) + board_time_init(); + + /* + * If we don't have an RTC (such as with the SH7300), don't attempt to + * probe the timer frequency. Rely on an either hardcoded peripheral + * clock value, or on the sh_pclk command line option. Note that we + * still need to have CONFIG_SH_PCLK_FREQ set in order for things like + * CLOCK_TICK_RATE to be sane. + */ + current_cpu_data.module_clock = sh_pclk_freq; + +#ifdef CONFIG_SH_PCLK_CALC + /* XXX: Switch this over to a more generic test. */ + { + unsigned int freq; + + /* + * If we've specified a peripheral clock frequency, and we have + * an RTC, compare it against the autodetected value. Complain + * if there's a mismatch. + */ + timer_freq = get_timer_frequency(); + freq = timer_freq * 4; + + if (sh_pclk_freq && (sh_pclk_freq/100*99 > freq || sh_pclk_freq/100*101 < freq)) { + printk(KERN_NOTICE "Calculated peripheral clock value " + "%d differs from sh_pclk value %d, fixing..\n", + freq, sh_pclk_freq); + current_cpu_data.module_clock = freq; + } + } +#endif + +#ifdef CONFIG_CPU_SUBTYPE_ST40STB1 + /* XXX: Update ST40 code to use board_time_init() */ + pvr = ctrl_inl(CCN_PVR); + frqcr = ctrl_inw(FRQCR); + printk("time.c ST40 Probe: PVR %08lx, FRQCR %04hx\n", pvr, frqcr); + + if (((pvr >> CCN_PVR_CHIP_SHIFT) & CCN_PVR_CHIP_MASK) == CCN_PVR_CHIP_ST40STB1) + st40_specific_time_init(current_cpu_data.module_clock, frqcr); + else +#endif + get_current_frequency_divisors(&ifc, &bfc, &pfc); + + if (rtc_get_time) { + rtc_get_time(&xtime); + } else { + xtime.tv_sec = mktime(2000, 1, 1, 0, 0, 0); + xtime.tv_nsec = 0; + } + + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); + + if (board_timer_setup) { + board_timer_setup(&irq0); + } else { + setup_irq(TIMER_IRQ, &irq0); + } + + /* + * for ST40 chips the current_cpu_data should already be set + * so not having valid pfc/bfc/ifc shouldn't be a problem + */ + if (!current_cpu_data.master_clock) + current_cpu_data.master_clock = current_cpu_data.module_clock * pfc; + if (!current_cpu_data.bus_clock) + current_cpu_data.bus_clock = current_cpu_data.master_clock / bfc; + if (!current_cpu_data.cpu_clock) + current_cpu_data.cpu_clock = current_cpu_data.master_clock / ifc; + + printk("CPU clock: %d.%02dMHz\n", + (current_cpu_data.cpu_clock / 1000000), + (current_cpu_data.cpu_clock % 1000000)/10000); + printk("Bus clock: %d.%02dMHz\n", + (current_cpu_data.bus_clock / 1000000), + (current_cpu_data.bus_clock % 1000000)/10000); +#ifdef CONFIG_CPU_SUBTYPE_ST40STB1 + printk("Memory clock: %d.%02dMHz\n", + (current_cpu_data.memory_clock / 1000000), + (current_cpu_data.memory_clock % 1000000)/10000); +#endif + printk("Module clock: %d.%02dMHz\n", + (current_cpu_data.module_clock / 1000000), + (current_cpu_data.module_clock % 1000000)/10000); + + interval = (current_cpu_data.module_clock/4 + HZ/2) / HZ; + + printk("Interval = %ld\n", interval); + + /* Start TMU0 */ + ctrl_outb(0, TMU_TSTR); +#if !defined(CONFIG_CPU_SUBTYPE_SH7300) + ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); +#endif + ctrl_outw(TMU0_TCR_INIT, TMU0_TCR); + ctrl_outl(interval, TMU0_TCOR); + ctrl_outl(interval, TMU0_TCNT); + ctrl_outb(TMU_TSTR_INIT, TMU_TSTR); + +#if defined(CONFIG_SH_KGDB) + /* + * Set up kgdb as requested. We do it here because the serial + * init uses the timer vars we just set up for figuring baud. + */ + kgdb_init(); +#endif +} diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c new file mode 100644 index 00000000000..7eb06719d84 --- /dev/null +++ b/arch/sh/kernel/traps.c @@ -0,0 +1,712 @@ +/* $Id: traps.c,v 1.17 2004/05/02 01:46:30 sugioka Exp $ + * + * linux/arch/sh/traps.c + * + * SuperH version: Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2000 Philipp Rumpf + * Copyright (C) 2000 David Howells + * Copyright (C) 2002, 2003 Paul Mundt + */ + +/* + * 'Traps.c' handles hardware traps and faults after we have saved some + * state in 'entry.S'. + */ +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/module.h> +#include <linux/kallsyms.h> + +#include <asm/system.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/atomic.h> +#include <asm/processor.h> +#include <asm/sections.h> + +#ifdef CONFIG_SH_KGDB +#include <asm/kgdb.h> +#define CHK_REMOTE_DEBUG(regs) \ +{ \ + if ((kgdb_debug_hook != (kgdb_debug_hook_t *) NULL) && (!user_mode(regs))) \ + { \ + (*kgdb_debug_hook)(regs); \ + } \ +} +#else +#define CHK_REMOTE_DEBUG(regs) +#endif + +#define DO_ERROR(trapnr, signr, str, name, tsk) \ +asmlinkage void do_##name(unsigned long r4, unsigned long r5, \ + unsigned long r6, unsigned long r7, \ + struct pt_regs regs) \ +{ \ + unsigned long error_code; \ + \ + /* Check if it's a DSP instruction */ \ + if (is_dsp_inst(®s)) { \ + /* Enable DSP mode, and restart instruction. */ \ + regs.sr |= SR_DSP; \ + return; \ + } \ + \ + asm volatile("stc r2_bank, %0": "=r" (error_code)); \ + local_irq_enable(); \ + tsk->thread.error_code = error_code; \ + tsk->thread.trap_no = trapnr; \ + CHK_REMOTE_DEBUG(®s); \ + force_sig(signr, tsk); \ + die_if_no_fixup(str,®s,error_code); \ +} + +#ifdef CONFIG_CPU_SH2 +#define TRAP_RESERVED_INST 4 +#define TRAP_ILLEGAL_SLOT_INST 6 +#else +#define TRAP_RESERVED_INST 12 +#define TRAP_ILLEGAL_SLOT_INST 13 +#endif + +/* + * These constants are for searching for possible module text + * segments. VMALLOC_OFFSET comes from mm/vmalloc.c; MODULE_RANGE is + * a guess of how much space is likely to be vmalloced. + */ +#define VMALLOC_OFFSET (8*1024*1024) +#define MODULE_RANGE (8*1024*1024) + +spinlock_t die_lock; + +void die(const char * str, struct pt_regs * regs, long err) +{ + static int die_counter; + + console_verbose(); + spin_lock_irq(&die_lock); + printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter); + CHK_REMOTE_DEBUG(regs); + show_regs(regs); + spin_unlock_irq(&die_lock); + do_exit(SIGSEGV); +} + +static inline void die_if_kernel(const char * str, struct pt_regs * regs, long err) +{ + if (!user_mode(regs)) + die(str, regs, err); +} + +static int handle_unaligned_notify_count = 10; + +/* + * try and fix up kernelspace address errors + * - userspace errors just cause EFAULT to be returned, resulting in SEGV + * - kernel/userspace interfaces cause a jump to an appropriate handler + * - other kernel errors are bad + * - return 0 if fixed-up, -EFAULT if non-fatal (to the kernel) fault + */ +static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err) +{ + if (!user_mode(regs)) + { + const struct exception_table_entry *fixup; + fixup = search_exception_tables(regs->pc); + if (fixup) { + regs->pc = fixup->fixup; + return 0; + } + die(str, regs, err); + } + return -EFAULT; +} + +/* + * handle an instruction that does an unaligned memory access by emulating the + * desired behaviour + * - note that PC _may not_ point to the faulting instruction + * (if that instruction is in a branch delay slot) + * - return 0 if emulation okay, -EFAULT on existential error + */ +static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs) +{ + int ret, index, count; + unsigned long *rm, *rn; + unsigned char *src, *dst; + + index = (instruction>>8)&15; /* 0x0F00 */ + rn = ®s->regs[index]; + + index = (instruction>>4)&15; /* 0x00F0 */ + rm = ®s->regs[index]; + + count = 1<<(instruction&3); + + ret = -EFAULT; + switch (instruction>>12) { + case 0: /* mov.[bwl] to/from memory via r0+rn */ + if (instruction & 8) { + /* from memory */ + src = (unsigned char*) *rm; + src += regs->regs[0]; + dst = (unsigned char*) rn; + *(unsigned long*)dst = 0; + +#ifdef __LITTLE_ENDIAN__ + if (copy_from_user(dst, src, count)) + goto fetch_fault; + + if ((count == 2) && dst[1] & 0x80) { + dst[2] = 0xff; + dst[3] = 0xff; + } +#else + dst += 4-count; + + if (__copy_user(dst, src, count)) + goto fetch_fault; + + if ((count == 2) && dst[2] & 0x80) { + dst[0] = 0xff; + dst[1] = 0xff; + } +#endif + } else { + /* to memory */ + src = (unsigned char*) rm; +#if !defined(__LITTLE_ENDIAN__) + src += 4-count; +#endif + dst = (unsigned char*) *rn; + dst += regs->regs[0]; + + if (copy_to_user(dst, src, count)) + goto fetch_fault; + } + ret = 0; + break; + + case 1: /* mov.l Rm,@(disp,Rn) */ + src = (unsigned char*) rm; + dst = (unsigned char*) *rn; + dst += (instruction&0x000F)<<2; + + if (copy_to_user(dst,src,4)) + goto fetch_fault; + ret = 0; + break; + + case 2: /* mov.[bwl] to memory, possibly with pre-decrement */ + if (instruction & 4) + *rn -= count; + src = (unsigned char*) rm; + dst = (unsigned char*) *rn; +#if !defined(__LITTLE_ENDIAN__) + src += 4-count; +#endif + if (copy_to_user(dst, src, count)) + goto fetch_fault; + ret = 0; + break; + + case 5: /* mov.l @(disp,Rm),Rn */ + src = (unsigned char*) *rm; + src += (instruction&0x000F)<<2; + dst = (unsigned char*) rn; + *(unsigned long*)dst = 0; + + if (copy_from_user(dst,src,4)) + goto fetch_fault; + ret = 0; + break; + + case 6: /* mov.[bwl] from memory, possibly with post-increment */ + src = (unsigned char*) *rm; + if (instruction & 4) + *rm += count; + dst = (unsigned char*) rn; + *(unsigned long*)dst = 0; + +#ifdef __LITTLE_ENDIAN__ + if (copy_from_user(dst, src, count)) + goto fetch_fault; + + if ((count == 2) && dst[1] & 0x80) { + dst[2] = 0xff; + dst[3] = 0xff; + } +#else + dst += 4-count; + + if (copy_from_user(dst, src, count)) + goto fetch_fault; + + if ((count == 2) && dst[2] & 0x80) { + dst[0] = 0xff; + dst[1] = 0xff; + } +#endif + ret = 0; + break; + + case 8: + switch ((instruction&0xFF00)>>8) { + case 0x81: /* mov.w R0,@(disp,Rn) */ + src = (unsigned char*) ®s->regs[0]; +#if !defined(__LITTLE_ENDIAN__) + src += 2; +#endif + dst = (unsigned char*) *rm; /* called Rn in the spec */ + dst += (instruction&0x000F)<<1; + + if (copy_to_user(dst, src, 2)) + goto fetch_fault; + ret = 0; + break; + + case 0x85: /* mov.w @(disp,Rm),R0 */ + src = (unsigned char*) *rm; + src += (instruction&0x000F)<<1; + dst = (unsigned char*) ®s->regs[0]; + *(unsigned long*)dst = 0; + +#if !defined(__LITTLE_ENDIAN__) + dst += 2; +#endif + + if (copy_from_user(dst, src, 2)) + goto fetch_fault; + +#ifdef __LITTLE_ENDIAN__ + if (dst[1] & 0x80) { + dst[2] = 0xff; + dst[3] = 0xff; + } +#else + if (dst[2] & 0x80) { + dst[0] = 0xff; + dst[1] = 0xff; + } +#endif + ret = 0; + break; + } + break; + } + return ret; + + fetch_fault: + /* Argh. Address not only misaligned but also non-existent. + * Raise an EFAULT and see if it's trapped + */ + return die_if_no_fixup("Fault in unaligned fixup", regs, 0); +} + +/* + * emulate the instruction in the delay slot + * - fetches the instruction from PC+2 + */ +static inline int handle_unaligned_delayslot(struct pt_regs *regs) +{ + u16 instruction; + + if (copy_from_user(&instruction, (u16 *)(regs->pc+2), 2)) { + /* the instruction-fetch faulted */ + if (user_mode(regs)) + return -EFAULT; + + /* kernel */ + die("delay-slot-insn faulting in handle_unaligned_delayslot", regs, 0); + } + + return handle_unaligned_ins(instruction,regs); +} + +/* + * handle an instruction that does an unaligned memory access + * - have to be careful of branch delay-slot instructions that fault + * SH3: + * - if the branch would be taken PC points to the branch + * - if the branch would not be taken, PC points to delay-slot + * SH4: + * - PC always points to delayed branch + * - return 0 if handled, -EFAULT if failed (may not return if in kernel) + */ + +/* Macros to determine offset from current PC for branch instructions */ +/* Explicit type coercion is used to force sign extension where needed */ +#define SH_PC_8BIT_OFFSET(instr) ((((signed char)(instr))*2) + 4) +#define SH_PC_12BIT_OFFSET(instr) ((((signed short)(instr<<4))>>3) + 4) + +static int handle_unaligned_access(u16 instruction, struct pt_regs *regs) +{ + u_int rm; + int ret, index; + + index = (instruction>>8)&15; /* 0x0F00 */ + rm = regs->regs[index]; + + /* shout about the first ten userspace fixups */ + if (user_mode(regs) && handle_unaligned_notify_count>0) { + handle_unaligned_notify_count--; + + printk("Fixing up unaligned userspace access in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", + current->comm,current->pid,(u16*)regs->pc,instruction); + } + + ret = -EFAULT; + switch (instruction&0xF000) { + case 0x0000: + if (instruction==0x000B) { + /* rts */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) + regs->pc = regs->pr; + } + else if ((instruction&0x00FF)==0x0023) { + /* braf @Rm */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) + regs->pc += rm + 4; + } + else if ((instruction&0x00FF)==0x0003) { + /* bsrf @Rm */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) { + regs->pr = regs->pc + 4; + regs->pc += rm + 4; + } + } + else { + /* mov.[bwl] to/from memory via r0+rn */ + goto simple; + } + break; + + case 0x1000: /* mov.l Rm,@(disp,Rn) */ + goto simple; + + case 0x2000: /* mov.[bwl] to memory, possibly with pre-decrement */ + goto simple; + + case 0x4000: + if ((instruction&0x00FF)==0x002B) { + /* jmp @Rm */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) + regs->pc = rm; + } + else if ((instruction&0x00FF)==0x000B) { + /* jsr @Rm */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) { + regs->pr = regs->pc + 4; + regs->pc = rm; + } + } + else { + /* mov.[bwl] to/from memory via r0+rn */ + goto simple; + } + break; + + case 0x5000: /* mov.l @(disp,Rm),Rn */ + goto simple; + + case 0x6000: /* mov.[bwl] from memory, possibly with post-increment */ + goto simple; + + case 0x8000: /* bf lab, bf/s lab, bt lab, bt/s lab */ + switch (instruction&0x0F00) { + case 0x0100: /* mov.w R0,@(disp,Rm) */ + goto simple; + case 0x0500: /* mov.w @(disp,Rm),R0 */ + goto simple; + case 0x0B00: /* bf lab - no delayslot*/ + break; + case 0x0F00: /* bf/s lab */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) { +#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB) + if ((regs->sr & 0x00000001) != 0) + regs->pc += 4; /* next after slot */ + else +#endif + regs->pc += SH_PC_8BIT_OFFSET(instruction); + } + break; + case 0x0900: /* bt lab - no delayslot */ + break; + case 0x0D00: /* bt/s lab */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) { +#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB) + if ((regs->sr & 0x00000001) == 0) + regs->pc += 4; /* next after slot */ + else +#endif + regs->pc += SH_PC_8BIT_OFFSET(instruction); + } + break; + } + break; + + case 0xA000: /* bra label */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) + regs->pc += SH_PC_12BIT_OFFSET(instruction); + break; + + case 0xB000: /* bsr label */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) { + regs->pr = regs->pc + 4; + regs->pc += SH_PC_12BIT_OFFSET(instruction); + } + break; + } + return ret; + + /* handle non-delay-slot instruction */ + simple: + ret = handle_unaligned_ins(instruction,regs); + if (ret==0) + regs->pc += 2; + return ret; +} + +/* + * Handle various address error exceptions + */ +asmlinkage void do_address_error(struct pt_regs *regs, + unsigned long writeaccess, + unsigned long address) +{ + unsigned long error_code; + mm_segment_t oldfs; + u16 instruction; + int tmp; + + asm volatile("stc r2_bank,%0": "=r" (error_code)); + + oldfs = get_fs(); + + if (user_mode(regs)) { + local_irq_enable(); + current->thread.error_code = error_code; + current->thread.trap_no = (writeaccess) ? 8 : 7; + + /* bad PC is not something we can fix */ + if (regs->pc & 1) + goto uspace_segv; + + set_fs(USER_DS); + if (copy_from_user(&instruction, (u16 *)(regs->pc), 2)) { + /* Argh. Fault on the instruction itself. + This should never happen non-SMP + */ + set_fs(oldfs); + goto uspace_segv; + } + + tmp = handle_unaligned_access(instruction, regs); + set_fs(oldfs); + + if (tmp==0) + return; /* sorted */ + + uspace_segv: + printk(KERN_NOTICE "Killing process \"%s\" due to unaligned access\n", current->comm); + force_sig(SIGSEGV, current); + } else { + if (regs->pc & 1) + die("unaligned program counter", regs, error_code); + + set_fs(KERNEL_DS); + if (copy_from_user(&instruction, (u16 *)(regs->pc), 2)) { + /* Argh. Fault on the instruction itself. + This should never happen non-SMP + */ + set_fs(oldfs); + die("insn faulting in do_address_error", regs, 0); + } + + handle_unaligned_access(instruction, regs); + set_fs(oldfs); + } +} + +#ifdef CONFIG_SH_DSP +/* + * SH-DSP support gerg@snapgear.com. + */ +int is_dsp_inst(struct pt_regs *regs) +{ + unsigned short inst; + + /* + * Safe guard if DSP mode is already enabled or we're lacking + * the DSP altogether. + */ + if (!(cpu_data->flags & CPU_HAS_DSP) || (regs->sr & SR_DSP)) + return 0; + + get_user(inst, ((unsigned short *) regs->pc)); + + inst &= 0xf000; + + /* Check for any type of DSP or support instruction */ + if ((inst == 0xf000) || (inst == 0x4000)) + return 1; + + return 0; +} +#else +#define is_dsp_inst(regs) (0) +#endif /* CONFIG_SH_DSP */ + +DO_ERROR(TRAP_RESERVED_INST, SIGILL, "reserved instruction", reserved_inst, current) +DO_ERROR(TRAP_ILLEGAL_SLOT_INST, SIGILL, "illegal slot instruction", illegal_slot_inst, current) + +asmlinkage void do_exception_error(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + long ex; + asm volatile("stc r2_bank, %0" : "=r" (ex)); + die_if_kernel("exception", ®s, ex); +} + +#if defined(CONFIG_SH_STANDARD_BIOS) +void *gdb_vbr_vector; + +static inline void __init gdb_vbr_init(void) +{ + register unsigned long vbr; + + /* + * Read the old value of the VBR register to initialise + * the vector through which debug and BIOS traps are + * delegated by the Linux trap handler. + */ + asm volatile("stc vbr, %0" : "=r" (vbr)); + + gdb_vbr_vector = (void *)(vbr + 0x100); + printk("Setting GDB trap vector to 0x%08lx\n", + (unsigned long)gdb_vbr_vector); +} +#endif + +void __init per_cpu_trap_init(void) +{ + extern void *vbr_base; + +#ifdef CONFIG_SH_STANDARD_BIOS + gdb_vbr_init(); +#endif + + /* NOTE: The VBR value should be at P1 + (or P2, virtural "fixed" address space). + It's definitely should not in physical address. */ + + asm volatile("ldc %0, vbr" + : /* no output */ + : "r" (&vbr_base) + : "memory"); +} + +void __init trap_init(void) +{ + extern void *exception_handling_table[]; + + exception_handling_table[TRAP_RESERVED_INST] + = (void *)do_reserved_inst; + exception_handling_table[TRAP_ILLEGAL_SLOT_INST] + = (void *)do_illegal_slot_inst; + +#ifdef CONFIG_CPU_SH4 + if (!(cpu_data->flags & CPU_HAS_FPU)) { + /* For SH-4 lacking an FPU, treat floating point instructions + as reserved. */ + /* entry 64 corresponds to EXPEVT=0x800 */ + exception_handling_table[64] = (void *)do_reserved_inst; + exception_handling_table[65] = (void *)do_illegal_slot_inst; + } +#endif + + /* Setup VBR for boot cpu */ + per_cpu_trap_init(); +} + +void show_stack(struct task_struct *tsk, unsigned long *sp) +{ + unsigned long *stack, addr; + unsigned long module_start = VMALLOC_START; + unsigned long module_end = VMALLOC_END; + int i = 1; + + if (tsk && !sp) { + sp = (unsigned long *)tsk->thread.sp; + } + + if (!sp) { + __asm__ __volatile__ ( + "mov r15, %0\n\t" + "stc r7_bank, %1\n\t" + : "=r" (module_start), + "=r" (module_end) + ); + + sp = (unsigned long *)module_start; + } + + stack = sp; + + printk("\nCall trace: "); +#ifdef CONFIG_KALLSYMS + printk("\n"); +#endif + + while (!kstack_end(stack)) { + addr = *stack++; + if (((addr >= (unsigned long)_text) && + (addr <= (unsigned long)_etext)) || + ((addr >= module_start) && (addr <= module_end))) { + /* + * For 80-columns display, 6 entry is maximum. + * NOTE: '[<8c00abcd>] ' consumes 13 columns . + */ +#ifndef CONFIG_KALLSYMS + if (i && ((i % 6) == 0)) + printk("\n "); +#endif + printk("[<%08lx>] ", addr); + print_symbol("%s\n", addr); + i++; + } + } + + printk("\n"); +} + +void show_task(unsigned long *sp) +{ + show_stack(NULL, sp); +} + +void dump_stack(void) +{ + show_stack(NULL, NULL); +} +EXPORT_SYMBOL(dump_stack); diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S new file mode 100644 index 00000000000..51bdc1cf783 --- /dev/null +++ b/arch/sh/kernel/vmlinux.lds.S @@ -0,0 +1,155 @@ +/* $Id: vmlinux.lds.S,v 1.8 2003/05/16 17:18:14 lethal Exp $ + * ld script to make SuperH Linux kernel + * Written by Niibe Yutaka + */ +#include <linux/config.h> +#include <asm-generic/vmlinux.lds.h> + +#ifdef CONFIG_CPU_LITTLE_ENDIAN +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +#else +OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux") +#endif +OUTPUT_ARCH(sh) +ENTRY(_start) +SECTIONS +{ + . = 0x80000000 + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET; + _text = .; /* Text and read-only data */ + text = .; /* Text and read-only data */ + .empty_zero_page : { + *(.empty_zero_page) + } = 0 + .text : { + *(.text) + SCHED_TEXT + LOCK_TEXT + *(.fixup) + *(.gnu.warning) + } = 0x0009 + + . = ALIGN(16); /* Exception table */ + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + RODATA + + _etext = .; /* End of text section */ + + .data : { /* Data */ + *(.data) + + /* Align the initial ramdisk image (INITRD) on page boundaries. */ + . = ALIGN(4096); + __rd_start = .; + *(.initrd) + . = ALIGN(4096); + __rd_end = .; + + CONSTRUCTORS + } + + . = ALIGN(4096); + .data.page_aligned : { *(.data.idt) } + + . = ALIGN(32); + __per_cpu_start = .; + .data.percpu : { *(.data.percpu) } + __per_cpu_end = .; + .data.cacheline_aligned : { *(.data.cacheline_aligned) } + + _edata = .; /* End of data section */ + + . = ALIGN(8192); /* init_task */ + .data.init_task : { *(.data.init_task) } + /* stack */ + .stack : { stack = .; _stack = .; } + + . = ALIGN(4096); /* Init code and data */ + __init_begin = .; + _sinittext = .; + .init.text : { *(.init.text) } + _einittext = .; + .init.data : { *(.init.data) } + . = ALIGN(16); + __setup_start = .; + .init.setup : { *(.init.setup) } + __setup_end = .; + __initcall_start = .; + .initcall.init : { + *(.initcall1.init) + *(.initcall2.init) + *(.initcall3.init) + *(.initcall4.init) + *(.initcall5.init) + *(.initcall6.init) + *(.initcall7.init) + } + __initcall_end = .; + __con_initcall_start = .; + .con_initcall.init : { *(.con_initcall.init) } + __con_initcall_end = .; + SECURITY_INIT + __initramfs_start = .; + .init.ramfs : { *(.init.ramfs) } + __initramfs_end = .; + __machvec_start = .; + .init.machvec : { *(.init.machvec) } + __machvec_end = .; + . = ALIGN(4096); + __init_end = .; + + . = ALIGN(4); + __bss_start = .; /* BSS */ + .bss : { *(.bss) } + + . = ALIGN(4); + _end = . ; + + /* When something in the kernel is NOT compiled as a module, the + * module cleanup code and data are put into these segments. Both + * can then be thrown away, as cleanup code is never called unless + * it's a module. + */ + /DISCARD/ : { + *(.exit.text) + *(.exit.data) + *(.exitcall.exit) + } + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + Symbols in the DWARF debugging section are relative to the beginning + of the section so we begin .debug at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + /* These must appear regardless of . */ +} diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile new file mode 100644 index 00000000000..b5681e3f968 --- /dev/null +++ b/arch/sh/lib/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for SuperH-specific library files.. +# + +lib-y = delay.o memset.o memmove.o memchr.o \ + checksum.o strcasecmp.o strlen.o div64.o udivdi3.o \ + div64-generic.o + +memcpy-y := memcpy.o +memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o + +lib-y += $(memcpy-y) + diff --git a/arch/sh/lib/checksum.S b/arch/sh/lib/checksum.S new file mode 100644 index 00000000000..7c50dfe68c0 --- /dev/null +++ b/arch/sh/lib/checksum.S @@ -0,0 +1,385 @@ +/* $Id: checksum.S,v 1.10 2001/07/06 13:11:32 gniibe Exp $ + * + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * IP/TCP/UDP checksumming routines + * + * Authors: Jorge Cwik, <jorge@laser.satlink.net> + * Arnt Gulbrandsen, <agulbra@nvg.unit.no> + * Tom May, <ftom@netcom.com> + * Pentium Pro/II routines: + * Alexander Kjeldaas <astor@guardian.no> + * Finn Arne Gangstad <finnag@guardian.no> + * Lots of code moved from tcp.c and ip.c; see those files + * for more names. + * + * Changes: Ingo Molnar, converted csum_partial_copy() to 2.1 exception + * handling. + * Andi Kleen, add zeroing on error + * converted to pure assembler + * + * SuperH version: Copyright (C) 1999 Niibe Yutaka + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/errno.h> +#include <linux/linkage.h> + +/* + * computes a partial checksum, e.g. for TCP/UDP fragments + */ + +/* + * unsigned int csum_partial(const unsigned char *buf, int len, + * unsigned int sum); + */ + +.text +ENTRY(csum_partial) + /* + * Experiments with Ethernet and SLIP connections show that buff + * is aligned on either a 2-byte or 4-byte boundary. We get at + * least a twofold speedup on 486 and Pentium if it is 4-byte aligned. + * Fortunately, it is easy to convert 2-byte alignment to 4-byte + * alignment for the unrolled loop. + */ + mov r5, r1 + mov r4, r0 + tst #2, r0 ! Check alignment. + bt 2f ! Jump if alignment is ok. + ! + add #-2, r5 ! Alignment uses up two bytes. + cmp/pz r5 ! + bt/s 1f ! Jump if we had at least two bytes. + clrt + bra 6f + add #2, r5 ! r5 was < 2. Deal with it. +1: + mov r5, r1 ! Save new len for later use. + mov.w @r4+, r0 + extu.w r0, r0 + addc r0, r6 + bf 2f + add #1, r6 +2: + mov #-5, r0 + shld r0, r5 + tst r5, r5 + bt/s 4f ! if it's =0, go to 4f + clrt + .align 2 +3: + mov.l @r4+, r0 + mov.l @r4+, r2 + mov.l @r4+, r3 + addc r0, r6 + mov.l @r4+, r0 + addc r2, r6 + mov.l @r4+, r2 + addc r3, r6 + mov.l @r4+, r3 + addc r0, r6 + mov.l @r4+, r0 + addc r2, r6 + mov.l @r4+, r2 + addc r3, r6 + addc r0, r6 + addc r2, r6 + movt r0 + dt r5 + bf/s 3b + cmp/eq #1, r0 + ! here, we know r5==0 + addc r5, r6 ! add carry to r6 +4: + mov r1, r0 + and #0x1c, r0 + tst r0, r0 + bt/s 6f + mov r0, r5 + shlr2 r5 + mov #0, r2 +5: + addc r2, r6 + mov.l @r4+, r2 + movt r0 + dt r5 + bf/s 5b + cmp/eq #1, r0 + addc r2, r6 + addc r5, r6 ! r5==0 here, so it means add carry-bit +6: + mov r1, r5 + mov #3, r0 + and r0, r5 + tst r5, r5 + bt 9f ! if it's =0 go to 9f + mov #2, r1 + cmp/hs r1, r5 + bf 7f + mov.w @r4+, r0 + extu.w r0, r0 + cmp/eq r1, r5 + bt/s 8f + clrt + shll16 r0 + addc r0, r6 +7: + mov.b @r4+, r0 + extu.b r0, r0 +#ifndef __LITTLE_ENDIAN__ + shll8 r0 +#endif +8: + addc r0, r6 + mov #0, r0 + addc r0, r6 +9: + rts + mov r6, r0 + +/* +unsigned int csum_partial_copy_generic (const char *src, char *dst, int len, + int sum, int *src_err_ptr, int *dst_err_ptr) + */ + +/* + * Copy from ds while checksumming, otherwise like csum_partial + * + * The macros SRC and DST specify the type of access for the instruction. + * thus we can call a custom exception handler for all access types. + * + * FIXME: could someone double-check whether I haven't mixed up some SRC and + * DST definitions? It's damn hard to trigger all cases. I hope I got + * them all but there's no guarantee. + */ + +#define SRC(...) \ + 9999: __VA_ARGS__ ; \ + .section __ex_table, "a"; \ + .long 9999b, 6001f ; \ + .previous + +#define DST(...) \ + 9999: __VA_ARGS__ ; \ + .section __ex_table, "a"; \ + .long 9999b, 6002f ; \ + .previous + +! +! r4: const char *SRC +! r5: char *DST +! r6: int LEN +! r7: int SUM +! +! on stack: +! int *SRC_ERR_PTR +! int *DST_ERR_PTR +! +ENTRY(csum_partial_copy_generic) + mov.l r5,@-r15 + mov.l r6,@-r15 + + mov #3,r0 ! Check src and dest are equally aligned + mov r4,r1 + and r0,r1 + and r5,r0 + cmp/eq r1,r0 + bf 3f ! Different alignments, use slow version + tst #1,r0 ! Check dest word aligned + bf 3f ! If not, do it the slow way + + mov #2,r0 + tst r0,r5 ! Check dest alignment. + bt 2f ! Jump if alignment is ok. + add #-2,r6 ! Alignment uses up two bytes. + cmp/pz r6 ! Jump if we had at least two bytes. + bt/s 1f + clrt + bra 4f + add #2,r6 ! r6 was < 2. Deal with it. + +3: ! Handle different src and dest alignments. + ! This is not common, so simple byte by byte copy will do. + mov r6,r2 + shlr r6 + tst r6,r6 + bt 4f + clrt + .align 2 +5: +SRC( mov.b @r4+,r1 ) +SRC( mov.b @r4+,r0 ) + extu.b r1,r1 +DST( mov.b r1,@r5 ) +DST( mov.b r0,@(1,r5) ) + extu.b r0,r0 + add #2,r5 + +#ifdef __LITTLE_ENDIAN__ + shll8 r0 +#else + shll8 r1 +#endif + or r1,r0 + + addc r0,r7 + movt r0 + dt r6 + bf/s 5b + cmp/eq #1,r0 + mov #0,r0 + addc r0, r7 + + mov r2, r0 + tst #1, r0 + bt 7f + bra 5f + clrt + + ! src and dest equally aligned, but to a two byte boundary. + ! Handle first two bytes as a special case + .align 2 +1: +SRC( mov.w @r4+,r0 ) +DST( mov.w r0,@r5 ) + add #2,r5 + extu.w r0,r0 + addc r0,r7 + mov #0,r0 + addc r0,r7 +2: + mov r6,r2 + mov #-5,r0 + shld r0,r6 + tst r6,r6 + bt/s 2f + clrt + .align 2 +1: +SRC( mov.l @r4+,r0 ) +SRC( mov.l @r4+,r1 ) + addc r0,r7 +DST( mov.l r0,@r5 ) +DST( mov.l r1,@(4,r5) ) + addc r1,r7 + +SRC( mov.l @r4+,r0 ) +SRC( mov.l @r4+,r1 ) + addc r0,r7 +DST( mov.l r0,@(8,r5) ) +DST( mov.l r1,@(12,r5) ) + addc r1,r7 + +SRC( mov.l @r4+,r0 ) +SRC( mov.l @r4+,r1 ) + addc r0,r7 +DST( mov.l r0,@(16,r5) ) +DST( mov.l r1,@(20,r5) ) + addc r1,r7 + +SRC( mov.l @r4+,r0 ) +SRC( mov.l @r4+,r1 ) + addc r0,r7 +DST( mov.l r0,@(24,r5) ) +DST( mov.l r1,@(28,r5) ) + addc r1,r7 + add #32,r5 + movt r0 + dt r6 + bf/s 1b + cmp/eq #1,r0 + mov #0,r0 + addc r0,r7 + +2: mov r2,r6 + mov #0x1c,r0 + and r0,r6 + cmp/pl r6 + bf/s 4f + clrt + shlr2 r6 +3: +SRC( mov.l @r4+,r0 ) + addc r0,r7 +DST( mov.l r0,@r5 ) + add #4,r5 + movt r0 + dt r6 + bf/s 3b + cmp/eq #1,r0 + mov #0,r0 + addc r0,r7 +4: mov r2,r6 + mov #3,r0 + and r0,r6 + cmp/pl r6 + bf 7f + mov #2,r1 + cmp/hs r1,r6 + bf 5f +SRC( mov.w @r4+,r0 ) +DST( mov.w r0,@r5 ) + extu.w r0,r0 + add #2,r5 + cmp/eq r1,r6 + bt/s 6f + clrt + shll16 r0 + addc r0,r7 +5: +SRC( mov.b @r4+,r0 ) +DST( mov.b r0,@r5 ) + extu.b r0,r0 +#ifndef __LITTLE_ENDIAN__ + shll8 r0 +#endif +6: addc r0,r7 + mov #0,r0 + addc r0,r7 +7: +5000: + +# Exception handler: +.section .fixup, "ax" + +6001: + mov.l @(8,r15),r0 ! src_err_ptr + mov #-EFAULT,r1 + mov.l r1,@r0 + + ! zero the complete destination - computing the rest + ! is too much work + mov.l @(4,r15),r5 ! dst + mov.l @r15,r6 ! len + mov #0,r7 +1: mov.b r7,@r5 + dt r6 + bf/s 1b + add #1,r5 + mov.l 8000f,r0 + jmp @r0 + nop + .align 2 +8000: .long 5000b + +6002: + mov.l @(12,r15),r0 ! dst_err_ptr + mov #-EFAULT,r1 + mov.l r1,@r0 + mov.l 8001f,r0 + jmp @r0 + nop + .align 2 +8001: .long 5000b + +.previous + add #8,r15 + rts + mov r7,r0 diff --git a/arch/sh/lib/delay.c b/arch/sh/lib/delay.c new file mode 100644 index 00000000000..50b36037d86 --- /dev/null +++ b/arch/sh/lib/delay.c @@ -0,0 +1,41 @@ +/* + * Precise Delay Loops for SuperH + * + * Copyright (C) 1999 Niibe Yutaka & Kaz Kojima + */ + +#include <linux/sched.h> +#include <linux/delay.h> + +void __delay(unsigned long loops) +{ + __asm__ __volatile__( + "tst %0, %0\n\t" + "1:\t" + "bf/s 1b\n\t" + " dt %0" + : "=r" (loops) + : "0" (loops) + : "t"); +} + +inline void __const_udelay(unsigned long xloops) +{ + __asm__("dmulu.l %0, %2\n\t" + "sts mach, %0" + : "=r" (xloops) + : "0" (xloops), "r" (cpu_data[_smp_processor_id()].loops_per_jiffy) + : "macl", "mach"); + __delay(xloops * HZ); +} + +void __udelay(unsigned long usecs) +{ + __const_udelay(usecs * 0x000010c6); /* 2**32 / 1000000 */ +} + +void __ndelay(unsigned long nsecs) +{ + __const_udelay(nsecs * 0x00000005); +} + diff --git a/arch/sh/lib/div64-generic.c b/arch/sh/lib/div64-generic.c new file mode 100644 index 00000000000..c02473afd58 --- /dev/null +++ b/arch/sh/lib/div64-generic.c @@ -0,0 +1,19 @@ +/* + * Generic __div64_32 wrapper for __xdiv64_32. + */ + +#include <linux/types.h> + +extern u64 __xdiv64_32(u64 n, u32 d); + +u64 __div64_32(u64 *xp, u32 y) +{ + u64 rem; + u64 q = __xdiv64_32(*xp, y); + + rem = *xp - q * y; + *xp = q; + + return rem; +} + diff --git a/arch/sh/lib/div64.S b/arch/sh/lib/div64.S new file mode 100644 index 00000000000..eefc275d64a --- /dev/null +++ b/arch/sh/lib/div64.S @@ -0,0 +1,46 @@ +/* + * unsigned long long __xdiv64_32(unsigned long long n, unsigned long d); + */ + +#include <linux/linkage.h> + +.text +ENTRY(__xdiv64_32) +#ifdef __LITTLE_ENDIAN__ + mov r4, r0 + mov r5, r1 +#else + mov r4, r1 + mov r5, r0 +#endif + cmp/hs r6, r1 + bf.s 1f + mov #0, r2 + + mov r1, r2 + mov #0, r3 + div0u + .rept 32 + rotcl r2 + div1 r6, r3 + .endr + rotcl r2 + mul.l r6, r2 + sts macl, r3 + sub r3, r1 +1: + div0u + .rept 32 + rotcl r0 + div1 r6, r1 + .endr +#ifdef __LITTLE_ENDIAN__ + mov r2, r1 + rts + rotcl r0 +#else + rotcl r0 + mov r0, r1 + rts + mov r2, r0 +#endif diff --git a/arch/sh/lib/memchr.S b/arch/sh/lib/memchr.S new file mode 100644 index 00000000000..bc6036ad570 --- /dev/null +++ b/arch/sh/lib/memchr.S @@ -0,0 +1,26 @@ +/* $Id: memchr.S,v 1.1 2000/04/14 16:49:01 mjd Exp $ + * + * "memchr" implementation of SuperH + * + * Copyright (C) 1999 Niibe Yutaka + * + */ + +/* + * void *memchr(const void *s, int c, size_t n); + */ + +#include <linux/linkage.h> +ENTRY(memchr) + tst r6,r6 + bt/s 2f + exts.b r5,r5 +1: mov.b @r4,r1 + cmp/eq r1,r5 + bt/s 3f + dt r6 + bf/s 1b + add #1,r4 +2: mov #0,r4 +3: rts + mov r4,r0 diff --git a/arch/sh/lib/memcpy-sh4.S b/arch/sh/lib/memcpy-sh4.S new file mode 100644 index 00000000000..55f227441f9 --- /dev/null +++ b/arch/sh/lib/memcpy-sh4.S @@ -0,0 +1,800 @@ +/* + * "memcpy" implementation of SuperH + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (c) 2002 STMicroelectronics Ltd + * Modified from memcpy.S and micro-optimised for SH4 + * Stuart Menefy (stuart.menefy@st.com) + * + */ +#include <linux/linkage.h> +#include <linux/config.h> + +/* + * void *memcpy(void *dst, const void *src, size_t n); + * + * It is assumed that there is no overlap between src and dst. + * If there is an overlap, then the results are undefined. + */ + + ! + ! GHIJ KLMN OPQR --> ...G HIJK LMNO PQR. + ! + + ! Size is 16 or greater, and may have trailing bytes + + .balign 32 +.Lcase1: + ! Read a long word and write a long word at once + ! At the start of each iteration, r7 contains last long load + add #-1,r5 ! 79 EX + mov r4,r2 ! 5 MT (0 cycles latency) + + mov.l @(r0,r5),r7 ! 21 LS (2 cycles latency) + add #-4,r5 ! 50 EX + + add #7,r2 ! 79 EX + ! +#ifdef CONFIG_CPU_LITTLE_ENDIAN + ! 6 cycles, 4 bytes per iteration +3: mov.l @(r0,r5),r1 ! 21 LS (latency=2) ! NMLK + mov r7, r3 ! 5 MT (latency=0) ! RQPO + + cmp/hi r2,r0 ! 57 MT + shll16 r3 ! 103 EX + + mov r1,r6 ! 5 MT (latency=0) + shll8 r3 ! 102 EX ! Oxxx + + shlr8 r6 ! 106 EX ! xNML + mov r1, r7 ! 5 MT (latency=0) + + or r6,r3 ! 82 EX ! ONML + bt/s 3b ! 109 BR + + mov.l r3,@-r0 ! 30 LS +#else +3: mov.l @(r0,r5),r1 ! 21 LS (latency=2) ! KLMN + mov r7,r3 ! 5 MT (latency=0) ! OPQR + + cmp/hi r2,r0 ! 57 MT + shlr16 r3 ! 107 EX + + shlr8 r3 ! 106 EX ! xxxO + mov r1,r6 ! 5 MT (latency=0) + + shll8 r6 ! 102 EX ! LMNx + mov r1,r7 ! 5 MT (latency=0) + + or r6,r3 ! 82 EX ! LMNO + bt/s 3b ! 109 BR + + mov.l r3,@-r0 ! 30 LS +#endif + ! Finally, copy a byte at once, if necessary + + add #4,r5 ! 50 EX + cmp/eq r4,r0 ! 54 MT + + add #-6,r2 ! 50 EX + bt 9f ! 109 BR + +8: cmp/hi r2,r0 ! 57 MT + mov.b @(r0,r5),r1 ! 20 LS (latency=2) + + bt/s 8b ! 109 BR + + mov.b r1,@-r0 ! 29 LS + +9: rts + nop + + + ! + ! GHIJ KLMN OPQR --> .GHI JKLM NOPQ R... + ! + + ! Size is 16 or greater, and may have trailing bytes + + .balign 32 +.Lcase3: + ! Read a long word and write a long word at once + ! At the start of each iteration, r7 contains last long load + add #-3,r5 ! 79 EX + mov r4,r2 ! 5 MT (0 cycles latency) + + mov.l @(r0,r5),r7 ! 21 LS (2 cycles latency) + add #-4,r5 ! 50 EX + + add #7,r2 ! 79 EX + ! +#ifdef CONFIG_CPU_LITTLE_ENDIAN + ! 6 cycles, 4 bytes per iteration +3: mov.l @(r0,r5),r1 ! 21 LS (latency=2) ! NMLK + mov r7, r3 ! 5 MT (latency=0) ! RQPO + + cmp/hi r2,r0 ! 57 MT + shll8 r3 ! 102 EX ! QPOx + + mov r1,r6 ! 5 MT (latency=0) + shlr16 r6 ! 107 EX + + shlr8 r6 ! 106 EX ! xxxN + mov r1, r7 ! 5 MT (latency=0) + + or r6,r3 ! 82 EX ! QPON + bt/s 3b ! 109 BR + + mov.l r3,@-r0 ! 30 LS +#else +3: mov r1,r3 ! OPQR + shlr8 r3 ! xOPQ + mov.l @(r0,r5),r1 ! KLMN + mov r1,r6 + shll16 r6 + shll8 r6 ! Nxxx + or r6,r3 ! NOPQ + cmp/hi r2,r0 + bt/s 3b + mov.l r3,@-r0 +#endif + + ! Finally, copy a byte at once, if necessary + + add #6,r5 ! 50 EX + cmp/eq r4,r0 ! 54 MT + + add #-6,r2 ! 50 EX + bt 9f ! 109 BR + +8: cmp/hi r2,r0 ! 57 MT + mov.b @(r0,r5),r1 ! 20 LS (latency=2) + + bt/s 8b ! 109 BR + + mov.b r1,@-r0 ! 29 LS + +9: rts + nop + +ENTRY(memcpy) + + ! Calculate the invariants which will be used in the remainder + ! of the code: + ! + ! r4 --> [ ... ] DST [ ... ] SRC + ! [ ... ] [ ... ] + ! : : + ! r0 --> [ ... ] r0+r5 --> [ ... ] + ! + ! + + ! Short circuit the common case of src, dst and len being 32 bit aligned + ! and test for zero length move + + mov r6, r0 ! 5 MT (0 cycle latency) + or r4, r0 ! 82 EX + + or r5, r0 ! 82 EX + tst r6, r6 ! 86 MT + + bt/s 99f ! 111 BR (zero len) + tst #3, r0 ! 87 MT + + mov r4, r0 ! 5 MT (0 cycle latency) + add r6, r0 ! 49 EX + + mov #16, r1 ! 6 EX + bt/s .Lcase00 ! 111 BR (aligned) + + sub r4, r5 ! 75 EX + + ! Arguments are not nicely long word aligned or zero len. + ! Check for small copies, and if so do a simple byte at a time copy. + ! + ! Deciding on an exact value of 'small' is not easy, as the point at which + ! using the optimised routines become worthwhile varies (these are the + ! cycle counts for differnet sizes using byte-at-a-time vs. optimised): + ! size byte-at-time long word byte + ! 16 42 39-40 46-50 50-55 + ! 24 58 43-44 54-58 62-67 + ! 36 82 49-50 66-70 80-85 + ! However the penalty for getting it 'wrong' is much higher for long word + ! aligned data (and this is more common), so use a value of 16. + + cmp/gt r6,r1 ! 56 MT + + add #-1,r5 ! 50 EX + bf/s 6f ! 108 BR (not small) + + mov r5, r3 ! 5 MT (latency=0) + shlr r6 ! 104 EX + + mov.b @(r0,r5),r1 ! 20 LS (latency=2) + bf/s 4f ! 111 BR + + add #-1,r3 ! 50 EX + tst r6, r6 ! 86 MT + + bt/s 98f ! 110 BR + mov.b r1,@-r0 ! 29 LS + + ! 4 cycles, 2 bytes per iteration +3: mov.b @(r0,r5),r1 ! 20 LS (latency=2) + +4: mov.b @(r0,r3),r2 ! 20 LS (latency=2) + dt r6 ! 67 EX + + mov.b r1,@-r0 ! 29 LS + bf/s 3b ! 111 BR + + mov.b r2,@-r0 ! 29 LS +98: + rts + nop + +99: rts + mov r4, r0 + + ! Size is not small, so its worthwhile looking for optimisations. + ! First align destination to a long word boundary. + ! + ! r5 = normal value -1 + +6: tst #3, r0 ! 87 MT + mov #3, r3 ! 6 EX + + bt/s 2f ! 111 BR + and r0,r3 ! 78 EX + + ! 3 cycles, 1 byte per iteration +1: dt r3 ! 67 EX + mov.b @(r0,r5),r1 ! 19 LS (latency=2) + + add #-1, r6 ! 79 EX + bf/s 1b ! 109 BR + + mov.b r1,@-r0 ! 28 LS + +2: add #1, r5 ! 79 EX + + ! Now select the appropriate bulk transfer code based on relative + ! alignment of src and dst. + + mov r0, r3 ! 5 MT (latency=0) + + mov r5, r0 ! 5 MT (latency=0) + tst #1, r0 ! 87 MT + + bf/s 1f ! 111 BR + mov #64, r7 ! 6 EX + + ! bit 0 clear + + cmp/ge r7, r6 ! 55 MT + + bt/s 2f ! 111 BR + tst #2, r0 ! 87 MT + + ! small + bt/s .Lcase0 + mov r3, r0 + + bra .Lcase2 + nop + + ! big +2: bt/s .Lcase0b + mov r3, r0 + + bra .Lcase2b + nop + + ! bit 0 set +1: tst #2, r0 ! 87 MT + + bt/s .Lcase1 + mov r3, r0 + + bra .Lcase3 + nop + + + ! + ! GHIJ KLMN OPQR --> GHIJ KLMN OPQR + ! + + ! src, dst and size are all long word aligned + ! size is non-zero + + .balign 32 +.Lcase00: + mov #64, r1 ! 6 EX + mov r5, r3 ! 5 MT (latency=0) + + cmp/gt r6, r1 ! 56 MT + add #-4, r5 ! 50 EX + + bf .Lcase00b ! 108 BR (big loop) + shlr2 r6 ! 105 EX + + shlr r6 ! 104 EX + mov.l @(r0, r5), r1 ! 21 LS (latency=2) + + bf/s 4f ! 111 BR + add #-8, r3 ! 50 EX + + tst r6, r6 ! 86 MT + bt/s 5f ! 110 BR + + mov.l r1,@-r0 ! 30 LS + + ! 4 cycles, 2 long words per iteration +3: mov.l @(r0, r5), r1 ! 21 LS (latency=2) + +4: mov.l @(r0, r3), r2 ! 21 LS (latency=2) + dt r6 ! 67 EX + + mov.l r1, @-r0 ! 30 LS + bf/s 3b ! 109 BR + + mov.l r2, @-r0 ! 30 LS + +5: rts + nop + + + ! Size is 16 or greater and less than 64, but may have trailing bytes + + .balign 32 +.Lcase0: + add #-4, r5 ! 50 EX + mov r4, r7 ! 5 MT (latency=0) + + mov.l @(r0, r5), r1 ! 21 LS (latency=2) + mov #4, r2 ! 6 EX + + add #11, r7 ! 50 EX + tst r2, r6 ! 86 MT + + mov r5, r3 ! 5 MT (latency=0) + bt/s 4f ! 111 BR + + add #-4, r3 ! 50 EX + mov.l r1,@-r0 ! 30 LS + + ! 4 cycles, 2 long words per iteration +3: mov.l @(r0, r5), r1 ! 21 LS (latency=2) + +4: mov.l @(r0, r3), r2 ! 21 LS (latency=2) + cmp/hi r7, r0 + + mov.l r1, @-r0 ! 30 LS + bt/s 3b ! 109 BR + + mov.l r2, @-r0 ! 30 LS + + ! Copy the final 0-3 bytes + + add #3,r5 ! 50 EX + + cmp/eq r0, r4 ! 54 MT + add #-10, r7 ! 50 EX + + bt 9f ! 110 BR + + ! 3 cycles, 1 byte per iteration +1: mov.b @(r0,r5),r1 ! 19 LS + cmp/hi r7,r0 ! 57 MT + + bt/s 1b ! 111 BR + mov.b r1,@-r0 ! 28 LS + +9: rts + nop + + ! Size is at least 64 bytes, so will be going round the big loop at least once. + ! + ! r2 = rounded up r4 + ! r3 = rounded down r0 + + .balign 32 +.Lcase0b: + add #-4, r5 ! 50 EX + +.Lcase00b: + mov r0, r3 ! 5 MT (latency=0) + mov #(~0x1f), r1 ! 6 EX + + and r1, r3 ! 78 EX + mov r4, r2 ! 5 MT (latency=0) + + cmp/eq r3, r0 ! 54 MT + add #0x1f, r2 ! 50 EX + + bt/s 1f ! 110 BR + and r1, r2 ! 78 EX + + ! copy initial words until cache line aligned + + mov.l @(r0, r5), r1 ! 21 LS (latency=2) + tst #4, r0 ! 87 MT + + mov r5, r6 ! 5 MT (latency=0) + add #-4, r6 ! 50 EX + + bt/s 4f ! 111 BR + add #8, r3 ! 50 EX + + tst #0x18, r0 ! 87 MT + + bt/s 1f ! 109 BR + mov.l r1,@-r0 ! 30 LS + + ! 4 cycles, 2 long words per iteration +3: mov.l @(r0, r5), r1 ! 21 LS (latency=2) + +4: mov.l @(r0, r6), r7 ! 21 LS (latency=2) + cmp/eq r3, r0 ! 54 MT + + mov.l r1, @-r0 ! 30 LS + bf/s 3b ! 109 BR + + mov.l r7, @-r0 ! 30 LS + + ! Copy the cache line aligned blocks + ! + ! In use: r0, r2, r4, r5 + ! Scratch: r1, r3, r6, r7 + ! + ! We could do this with the four scratch registers, but if src + ! and dest hit the same cache line, this will thrash, so make + ! use of additional registers. + ! + ! We also need r0 as a temporary (for movca), so 'undo' the invariant: + ! r5: src (was r0+r5) + ! r1: dest (was r0) + ! this can be reversed at the end, so we don't need to save any extra + ! state. + ! +1: mov.l r8, @-r15 ! 30 LS + add r0, r5 ! 49 EX + + mov.l r9, @-r15 ! 30 LS + mov r0, r1 ! 5 MT (latency=0) + + mov.l r10, @-r15 ! 30 LS + add #-0x1c, r5 ! 50 EX + + mov.l r11, @-r15 ! 30 LS + + ! 16 cycles, 32 bytes per iteration +2: mov.l @(0x00,r5),r0 ! 18 LS (latency=2) + add #-0x20, r1 ! 50 EX + mov.l @(0x04,r5),r3 ! 18 LS (latency=2) + mov.l @(0x08,r5),r6 ! 18 LS (latency=2) + mov.l @(0x0c,r5),r7 ! 18 LS (latency=2) + mov.l @(0x10,r5),r8 ! 18 LS (latency=2) + mov.l @(0x14,r5),r9 ! 18 LS (latency=2) + mov.l @(0x18,r5),r10 ! 18 LS (latency=2) + mov.l @(0x1c,r5),r11 ! 18 LS (latency=2) + movca.l r0,@r1 ! 40 LS (latency=3-7) + mov.l r3,@(0x04,r1) ! 33 LS + mov.l r6,@(0x08,r1) ! 33 LS + mov.l r7,@(0x0c,r1) ! 33 LS + + mov.l r8,@(0x10,r1) ! 33 LS + add #-0x20, r5 ! 50 EX + + mov.l r9,@(0x14,r1) ! 33 LS + cmp/eq r2,r1 ! 54 MT + + mov.l r10,@(0x18,r1) ! 33 LS + bf/s 2b ! 109 BR + + mov.l r11,@(0x1c,r1) ! 33 LS + + mov r1, r0 ! 5 MT (latency=0) + + mov.l @r15+, r11 ! 15 LS + sub r1, r5 ! 75 EX + + mov.l @r15+, r10 ! 15 LS + cmp/eq r4, r0 ! 54 MT + + bf/s 1f ! 109 BR + mov.l @r15+, r9 ! 15 LS + + rts +1: mov.l @r15+, r8 ! 15 LS + sub r4, r1 ! 75 EX (len remaining) + + ! number of trailing bytes is non-zero + ! + ! invariants restored (r5 already decremented by 4) + ! also r1=num bytes remaining + + mov #4, r2 ! 6 EX + mov r4, r7 ! 5 MT (latency=0) + + add #0x1c, r5 ! 50 EX (back to -4) + cmp/hs r2, r1 ! 58 MT + + bf/s 5f ! 108 BR + add #11, r7 ! 50 EX + + mov.l @(r0, r5), r6 ! 21 LS (latency=2) + tst r2, r1 ! 86 MT + + mov r5, r3 ! 5 MT (latency=0) + bt/s 4f ! 111 BR + + add #-4, r3 ! 50 EX + cmp/hs r2, r1 ! 58 MT + + bt/s 5f ! 111 BR + mov.l r6,@-r0 ! 30 LS + + ! 4 cycles, 2 long words per iteration +3: mov.l @(r0, r5), r6 ! 21 LS (latency=2) + +4: mov.l @(r0, r3), r2 ! 21 LS (latency=2) + cmp/hi r7, r0 + + mov.l r6, @-r0 ! 30 LS + bt/s 3b ! 109 BR + + mov.l r2, @-r0 ! 30 LS + + ! Copy the final 0-3 bytes + +5: cmp/eq r0, r4 ! 54 MT + add #-10, r7 ! 50 EX + + bt 9f ! 110 BR + add #3,r5 ! 50 EX + + ! 3 cycles, 1 byte per iteration +1: mov.b @(r0,r5),r1 ! 19 LS + cmp/hi r7,r0 ! 57 MT + + bt/s 1b ! 111 BR + mov.b r1,@-r0 ! 28 LS + +9: rts + nop + + ! + ! GHIJ KLMN OPQR --> ..GH IJKL MNOP QR.. + ! + + .balign 32 +.Lcase2: + ! Size is 16 or greater and less then 64, but may have trailing bytes + +2: mov r5, r6 ! 5 MT (latency=0) + add #-2,r5 ! 50 EX + + mov r4,r2 ! 5 MT (latency=0) + add #-4,r6 ! 50 EX + + add #7,r2 ! 50 EX +3: mov.w @(r0,r5),r1 ! 20 LS (latency=2) + + mov.w @(r0,r6),r3 ! 20 LS (latency=2) + cmp/hi r2,r0 ! 57 MT + + mov.w r1,@-r0 ! 29 LS + bt/s 3b ! 111 BR + + mov.w r3,@-r0 ! 29 LS + + bra 10f + nop + + + .balign 32 +.Lcase2b: + ! Size is at least 64 bytes, so will be going round the big loop at least once. + ! + ! r2 = rounded up r4 + ! r3 = rounded down r0 + + mov r0, r3 ! 5 MT (latency=0) + mov #(~0x1f), r1 ! 6 EX + + and r1, r3 ! 78 EX + mov r4, r2 ! 5 MT (latency=0) + + cmp/eq r3, r0 ! 54 MT + add #0x1f, r2 ! 50 EX + + add #-2, r5 ! 50 EX + bt/s 1f ! 110 BR + and r1, r2 ! 78 EX + + ! Copy a short word one at a time until we are cache line aligned + ! Normal values: r0, r2, r3, r4 + ! Unused: r1, r6, r7 + ! Mod: r5 (=r5-2) + ! + add #2, r3 ! 50 EX + +2: mov.w @(r0,r5),r1 ! 20 LS (latency=2) + cmp/eq r3,r0 ! 54 MT + + bf/s 2b ! 111 BR + + mov.w r1,@-r0 ! 29 LS + + ! Copy the cache line aligned blocks + ! + ! In use: r0, r2, r4, r5 (=r5-2) + ! Scratch: r1, r3, r6, r7 + ! + ! We could do this with the four scratch registers, but if src + ! and dest hit the same cache line, this will thrash, so make + ! use of additional registers. + ! + ! We also need r0 as a temporary (for movca), so 'undo' the invariant: + ! r5: src (was r0+r5) + ! r1: dest (was r0) + ! this can be reversed at the end, so we don't need to save any extra + ! state. + ! +1: mov.l r8, @-r15 ! 30 LS + add r0, r5 ! 49 EX + + mov.l r9, @-r15 ! 30 LS + mov r0, r1 ! 5 MT (latency=0) + + mov.l r10, @-r15 ! 30 LS + add #-0x1e, r5 ! 50 EX + + mov.l r11, @-r15 ! 30 LS + + mov.l r12, @-r15 ! 30 LS + + ! 17 cycles, 32 bytes per iteration +#ifdef CONFIG_CPU_LITTLE_ENDIAN +2: mov.w @r5+, r0 ! 14 LS (latency=2) ..JI + add #-0x20, r1 ! 50 EX + + mov.l @r5+, r3 ! 15 LS (latency=2) NMLK + + mov.l @r5+, r6 ! 15 LS (latency=2) RQPO + shll16 r0 ! 103 EX JI.. + + mov.l @r5+, r7 ! 15 LS (latency=2) + xtrct r3, r0 ! 48 EX LKJI + + mov.l @r5+, r8 ! 15 LS (latency=2) + xtrct r6, r3 ! 48 EX PONM + + mov.l @r5+, r9 ! 15 LS (latency=2) + xtrct r7, r6 ! 48 EX + + mov.l @r5+, r10 ! 15 LS (latency=2) + xtrct r8, r7 ! 48 EX + + mov.l @r5+, r11 ! 15 LS (latency=2) + xtrct r9, r8 ! 48 EX + + mov.w @r5+, r12 ! 15 LS (latency=2) + xtrct r10, r9 ! 48 EX + + movca.l r0,@r1 ! 40 LS (latency=3-7) + xtrct r11, r10 ! 48 EX + + mov.l r3, @(0x04,r1) ! 33 LS + xtrct r12, r11 ! 48 EX + + mov.l r6, @(0x08,r1) ! 33 LS + + mov.l r7, @(0x0c,r1) ! 33 LS + + mov.l r8, @(0x10,r1) ! 33 LS + add #-0x40, r5 ! 50 EX + + mov.l r9, @(0x14,r1) ! 33 LS + cmp/eq r2,r1 ! 54 MT + + mov.l r10, @(0x18,r1) ! 33 LS + bf/s 2b ! 109 BR + + mov.l r11, @(0x1c,r1) ! 33 LS +#else +2: mov.w @(0x1e,r5), r0 ! 17 LS (latency=2) + add #-2, r5 ! 50 EX + + mov.l @(0x1c,r5), r3 ! 18 LS (latency=2) + add #-4, r1 ! 50 EX + + mov.l @(0x18,r5), r6 ! 18 LS (latency=2) + shll16 r0 ! 103 EX + + mov.l @(0x14,r5), r7 ! 18 LS (latency=2) + xtrct r3, r0 ! 48 EX + + mov.l @(0x10,r5), r8 ! 18 LS (latency=2) + xtrct r6, r3 ! 48 EX + + mov.l @(0x0c,r5), r9 ! 18 LS (latency=2) + xtrct r7, r6 ! 48 EX + + mov.l @(0x08,r5), r10 ! 18 LS (latency=2) + xtrct r8, r7 ! 48 EX + + mov.l @(0x04,r5), r11 ! 18 LS (latency=2) + xtrct r9, r8 ! 48 EX + + mov.w @(0x02,r5), r12 ! 18 LS (latency=2) + xtrct r10, r9 ! 48 EX + + movca.l r0,@r1 ! 40 LS (latency=3-7) + add #-0x1c, r1 ! 50 EX + + mov.l r3, @(0x1c,r1) ! 33 LS + xtrct r11, r10 ! 48 EX + + mov.l r6, @(0x18,r1) ! 33 LS + xtrct r12, r11 ! 48 EX + + mov.l r7, @(0x14,r1) ! 33 LS + + mov.l r8, @(0x10,r1) ! 33 LS + add #-0x3e, r5 ! 50 EX + + mov.l r9, @(0x0c,r1) ! 33 LS + cmp/eq r2,r1 ! 54 MT + + mov.l r10, @(0x08,r1) ! 33 LS + bf/s 2b ! 109 BR + + mov.l r11, @(0x04,r1) ! 33 LS +#endif + + mov.l @r15+, r12 + mov r1, r0 ! 5 MT (latency=0) + + mov.l @r15+, r11 ! 15 LS + sub r1, r5 ! 75 EX + + mov.l @r15+, r10 ! 15 LS + cmp/eq r4, r0 ! 54 MT + + bf/s 1f ! 109 BR + mov.l @r15+, r9 ! 15 LS + + rts +1: mov.l @r15+, r8 ! 15 LS + + add #0x1e, r5 ! 50 EX + + ! Finish off a short word at a time + ! r5 must be invariant - 2 +10: mov r4,r2 ! 5 MT (latency=0) + add #1,r2 ! 50 EX + + cmp/hi r2, r0 ! 57 MT + bf/s 1f ! 109 BR + + add #2, r2 ! 50 EX + +3: mov.w @(r0,r5),r1 ! 20 LS + cmp/hi r2,r0 ! 57 MT + + bt/s 3b ! 109 BR + + mov.w r1,@-r0 ! 29 LS +1: + + ! + ! Finally, copy the last byte if necessary + cmp/eq r4,r0 ! 54 MT + bt/s 9b + add #1,r5 + mov.b @(r0,r5),r1 + rts + mov.b r1,@-r0 + diff --git a/arch/sh/lib/memcpy.S b/arch/sh/lib/memcpy.S new file mode 100644 index 00000000000..232fab34c26 --- /dev/null +++ b/arch/sh/lib/memcpy.S @@ -0,0 +1,227 @@ +/* $Id: memcpy.S,v 1.3 2001/07/27 11:50:52 gniibe Exp $ + * + * "memcpy" implementation of SuperH + * + * Copyright (C) 1999 Niibe Yutaka + * + */ + +/* + * void *memcpy(void *dst, const void *src, size_t n); + * No overlap between the memory of DST and of SRC are assumed. + */ + +#include <linux/linkage.h> +ENTRY(memcpy) + tst r6,r6 + bt/s 9f ! if n=0, do nothing + mov r4,r0 + sub r4,r5 ! From here, r5 has the distance to r0 + add r6,r0 ! From here, r0 points the end of copying point + mov #12,r1 + cmp/gt r6,r1 + bt/s 7f ! if it's too small, copy a byte at once + add #-1,r5 + add #1,r5 + ! From here, r6 is free + ! + ! r4 --> [ ... ] DST [ ... ] SRC + ! [ ... ] [ ... ] + ! : : + ! r0 --> [ ... ] r0+r5 --> [ ... ] + ! + ! + mov r5,r1 + mov #3,r2 + and r2,r1 + shll2 r1 + mov r0,r3 ! Save the value on R0 to R3 + mova jmptable,r0 + add r1,r0 + mov.l @r0,r1 + jmp @r1 + mov r3,r0 ! and back to R0 + .balign 4 +jmptable: + .long case0 + .long case1 + .long case2 + .long case3 + + ! copy a byte at once +7: mov r4,r2 + add #1,r2 +8: + cmp/hi r2,r0 + mov.b @(r0,r5),r1 + bt/s 8b ! while (r0>r2) + mov.b r1,@-r0 +9: + rts + nop + +case0: + ! + ! GHIJ KLMN OPQR --> GHIJ KLMN OPQR + ! + ! First, align to long word boundary + mov r0,r3 + and r2,r3 + tst r3,r3 + bt/s 2f + add #-4,r5 + add #3,r5 +1: dt r3 + mov.b @(r0,r5),r1 + bf/s 1b + mov.b r1,@-r0 + ! + add #-3,r5 +2: ! Second, copy a long word at once + mov r4,r2 + add #7,r2 +3: mov.l @(r0,r5),r1 + cmp/hi r2,r0 + bt/s 3b + mov.l r1,@-r0 + ! + ! Third, copy a byte at once, if necessary + cmp/eq r4,r0 + bt/s 9b + add #3,r5 + bra 8b + add #-6,r2 + +case1: + ! + ! GHIJ KLMN OPQR --> ...G HIJK LMNO PQR. + ! + ! First, align to long word boundary + mov r0,r3 + and r2,r3 + tst r3,r3 + bt/s 2f + add #-1,r5 +1: dt r3 + mov.b @(r0,r5),r1 + bf/s 1b + mov.b r1,@-r0 + ! +2: ! Second, read a long word and write a long word at once + mov.l @(r0,r5),r1 + add #-4,r5 + mov r4,r2 + add #7,r2 + ! +#ifdef __LITTLE_ENDIAN__ +3: mov r1,r3 ! RQPO + shll16 r3 + shll8 r3 ! Oxxx + mov.l @(r0,r5),r1 ! NMLK + mov r1,r6 + shlr8 r6 ! xNML + or r6,r3 ! ONML + cmp/hi r2,r0 + bt/s 3b + mov.l r3,@-r0 +#else +3: mov r1,r3 ! OPQR + shlr16 r3 + shlr8 r3 ! xxxO + mov.l @(r0,r5),r1 ! KLMN + mov r1,r6 + shll8 r6 ! LMNx + or r6,r3 ! LMNO + cmp/hi r2,r0 + bt/s 3b + mov.l r3,@-r0 +#endif + ! + ! Third, copy a byte at once, if necessary + cmp/eq r4,r0 + bt/s 9b + add #4,r5 + bra 8b + add #-6,r2 + +case2: + ! + ! GHIJ KLMN OPQR --> ..GH IJKL MNOP QR.. + ! + ! First, align to word boundary + tst #1,r0 + bt/s 2f + add #-1,r5 + mov.b @(r0,r5),r1 + mov.b r1,@-r0 + ! +2: ! Second, read a word and write a word at once + add #-1,r5 + mov r4,r2 + add #3,r2 + ! +3: mov.w @(r0,r5),r1 + cmp/hi r2,r0 + bt/s 3b + mov.w r1,@-r0 + ! + ! Third, copy a byte at once, if necessary + cmp/eq r4,r0 + bt/s 9b + add #1,r5 + mov.b @(r0,r5),r1 + rts + mov.b r1,@-r0 + +case3: + ! + ! GHIJ KLMN OPQR --> .GHI JKLM NOPQ R... + ! + ! First, align to long word boundary + mov r0,r3 + and r2,r3 + tst r3,r3 + bt/s 2f + add #-1,r5 +1: dt r3 + mov.b @(r0,r5),r1 + bf/s 1b + mov.b r1,@-r0 + ! +2: ! Second, read a long word and write a long word at once + add #-2,r5 + mov.l @(r0,r5),r1 + add #-4,r5 + mov r4,r2 + add #7,r2 + ! +#ifdef __LITTLE_ENDIAN__ +3: mov r1,r3 ! RQPO + shll8 r3 ! QPOx + mov.l @(r0,r5),r1 ! NMLK + mov r1,r6 + shlr16 r6 + shlr8 r6 ! xxxN + or r6,r3 ! QPON + cmp/hi r2,r0 + bt/s 3b + mov.l r3,@-r0 +#else +3: mov r1,r3 ! OPQR + shlr8 r3 ! xOPQ + mov.l @(r0,r5),r1 ! KLMN + mov r1,r6 + shll16 r6 + shll8 r6 ! Nxxx + or r6,r3 ! NOPQ + cmp/hi r2,r0 + bt/s 3b + mov.l r3,@-r0 +#endif + ! + ! Third, copy a byte at once, if necessary + cmp/eq r4,r0 + bt/s 9b + add #6,r5 + bra 8b + add #-6,r2 diff --git a/arch/sh/lib/memmove.S b/arch/sh/lib/memmove.S new file mode 100644 index 00000000000..5a2211f0920 --- /dev/null +++ b/arch/sh/lib/memmove.S @@ -0,0 +1,254 @@ +/* $Id: memmove.S,v 1.2 2001/07/27 11:51:09 gniibe Exp $ + * + * "memmove" implementation of SuperH + * + * Copyright (C) 1999 Niibe Yutaka + * + */ + +/* + * void *memmove(void *dst, const void *src, size_t n); + * The memory areas may overlap. + */ + +#include <linux/linkage.h> +ENTRY(memmove) + ! if dest > src, call memcpy (it copies in decreasing order) + cmp/hi r5,r4 + bf 1f + mov.l 2f,r0 + jmp @r0 + nop + .balign 4 +2: .long memcpy +1: + sub r5,r4 ! From here, r4 has the distance to r0 + tst r6,r6 + bt/s 9f ! if n=0, do nothing + mov r5,r0 + add r6,r5 + mov #12,r1 + cmp/gt r6,r1 + bt/s 8f ! if it's too small, copy a byte at once + add #-1,r4 + add #1,r4 + ! + ! [ ... ] DST [ ... ] SRC + ! [ ... ] [ ... ] + ! : : + ! r0+r4--> [ ... ] r0 --> [ ... ] + ! : : + ! [ ... ] [ ... ] + ! r5 --> + ! + mov r4,r1 + mov #3,r2 + and r2,r1 + shll2 r1 + mov r0,r3 ! Save the value on R0 to R3 + mova jmptable,r0 + add r1,r0 + mov.l @r0,r1 + jmp @r1 + mov r3,r0 ! and back to R0 + .balign 4 +jmptable: + .long case0 + .long case1 + .long case2 + .long case3 + + ! copy a byte at once +8: mov.b @r0+,r1 + cmp/hs r5,r0 + bf/s 8b ! while (r0<r5) + mov.b r1,@(r0,r4) + add #1,r4 +9: + add r4,r0 + rts + sub r6,r0 + +case_none: + bra 8b + add #-1,r4 + +case0: + ! + ! GHIJ KLMN OPQR --> GHIJ KLMN OPQR + ! + ! First, align to long word boundary + mov r0,r3 + and r2,r3 + tst r3,r3 + bt/s 2f + add #-1,r4 + mov #4,r2 + sub r3,r2 +1: dt r2 + mov.b @r0+,r1 + bf/s 1b + mov.b r1,@(r0,r4) + ! +2: ! Second, copy a long word at once + add #-3,r4 + add #-3,r5 +3: mov.l @r0+,r1 + cmp/hs r5,r0 + bf/s 3b + mov.l r1,@(r0,r4) + add #3,r5 + ! + ! Third, copy a byte at once, if necessary + cmp/eq r5,r0 + bt/s 9b + add #4,r4 + bra 8b + add #-1,r4 + +case3: + ! + ! GHIJ KLMN OPQR --> ...G HIJK LMNO PQR. + ! + ! First, align to long word boundary + mov r0,r3 + and r2,r3 + tst r3,r3 + bt/s 2f + add #-1,r4 + mov #4,r2 + sub r3,r2 +1: dt r2 + mov.b @r0+,r1 + bf/s 1b + mov.b r1,@(r0,r4) + ! +2: ! Second, read a long word and write a long word at once + add #-2,r4 + mov.l @(r0,r4),r1 + add #-7,r5 + add #-4,r4 + ! +#ifdef __LITTLE_ENDIAN__ + shll8 r1 +3: mov r1,r3 ! JIHG + shlr8 r3 ! xJIH + mov.l @r0+,r1 ! NMLK + mov r1,r2 + shll16 r2 + shll8 r2 ! Kxxx + or r2,r3 ! KJIH + cmp/hs r5,r0 + bf/s 3b + mov.l r3,@(r0,r4) +#else + shlr8 r1 +3: mov r1,r3 ! GHIJ + shll8 r3 ! HIJx + mov.l @r0+,r1 ! KLMN + mov r1,r2 + shlr16 r2 + shlr8 r2 ! xxxK + or r2,r3 ! HIJK + cmp/hs r5,r0 + bf/s 3b + mov.l r3,@(r0,r4) +#endif + add #7,r5 + ! + ! Third, copy a byte at once, if necessary + cmp/eq r5,r0 + bt/s 9b + add #7,r4 + add #-3,r0 + bra 8b + add #-1,r4 + +case2: + ! + ! GHIJ KLMN OPQR --> ..GH IJKL MNOP QR.. + ! + ! First, align to word boundary + tst #1,r0 + bt/s 2f + add #-1,r4 + mov.b @r0+,r1 + mov.b r1,@(r0,r4) + ! +2: ! Second, read a word and write a word at once + add #-1,r4 + add #-1,r5 + ! +3: mov.w @r0+,r1 + cmp/hs r5,r0 + bf/s 3b + mov.w r1,@(r0,r4) + add #1,r5 + ! + ! Third, copy a byte at once, if necessary + cmp/eq r5,r0 + bt/s 9b + add #2,r4 + mov.b @r0,r1 + mov.b r1,@(r0,r4) + bra 9b + add #1,r0 + +case1: + ! + ! GHIJ KLMN OPQR --> .GHI JKLM NOPQ R... + ! + ! First, align to long word boundary + mov r0,r3 + and r2,r3 + tst r3,r3 + bt/s 2f + add #-1,r4 + mov #4,r2 + sub r3,r2 +1: dt r2 + mov.b @r0+,r1 + bf/s 1b + mov.b r1,@(r0,r4) + ! +2: ! Second, read a long word and write a long word at once + mov.l @(r0,r4),r1 + add #-7,r5 + add #-4,r4 + ! +#ifdef __LITTLE_ENDIAN__ + shll16 r1 + shll8 r1 +3: mov r1,r3 ! JIHG + shlr16 r3 + shlr8 r3 ! xxxJ + mov.l @r0+,r1 ! NMLK + mov r1,r2 + shll8 r2 ! MLKx + or r2,r3 ! MLKJ + cmp/hs r5,r0 + bf/s 3b + mov.l r3,@(r0,r4) +#else + shlr16 r1 + shlr8 r1 +3: mov r1,r3 ! GHIJ + shll16 r3 + shll8 r3 ! Jxxx + mov.l @r0+,r1 ! KLMN + mov r1,r2 + shlr8 r2 ! xKLM + or r2,r3 ! JKLM + cmp/hs r5,r0 + bf/s 3b ! while(r0<r5) + mov.l r3,@(r0,r4) +#endif + add #7,r5 + ! + ! Third, copy a byte at once, if necessary + cmp/eq r5,r0 + bt/s 9b + add #5,r4 + add #-3,r0 + bra 8b + add #-1,r4 diff --git a/arch/sh/lib/memset.S b/arch/sh/lib/memset.S new file mode 100644 index 00000000000..95670090680 --- /dev/null +++ b/arch/sh/lib/memset.S @@ -0,0 +1,57 @@ +/* $Id: memset.S,v 1.1 2000/04/14 16:49:01 mjd Exp $ + * + * "memset" implementation of SuperH + * + * Copyright (C) 1999 Niibe Yutaka + * + */ + +/* + * void *memset(void *s, int c, size_t n); + */ + +#include <linux/linkage.h> + +ENTRY(memset) + tst r6,r6 + bt/s 5f ! if n=0, do nothing + add r6,r4 + mov #12,r0 + cmp/gt r6,r0 + bt/s 4f ! if it's too small, set a byte at once + mov r4,r0 + and #3,r0 + cmp/eq #0,r0 + bt/s 2f ! It's aligned + sub r0,r6 +1: + dt r0 + bf/s 1b + mov.b r5,@-r4 +2: ! make VVVV + swap.b r5,r0 ! V0 + or r0,r5 ! VV + swap.w r5,r0 ! VV00 + or r0,r5 ! VVVV + ! + mov r6,r0 + shlr2 r0 + shlr r0 ! r0 = r6 >> 3 +3: + dt r0 + mov.l r5,@-r4 ! set 8-byte at once + bf/s 3b + mov.l r5,@-r4 + ! + mov #7,r0 + and r0,r6 + tst r6,r6 + bt 5f + ! fill bytes +4: + dt r6 + bf/s 4b + mov.b r5,@-r4 +5: + rts + mov r4,r0 diff --git a/arch/sh/lib/strcasecmp.c b/arch/sh/lib/strcasecmp.c new file mode 100644 index 00000000000..4e57a216fea --- /dev/null +++ b/arch/sh/lib/strcasecmp.c @@ -0,0 +1,26 @@ +/* + * linux/arch/alpha/lib/strcasecmp.c + */ + +#include <linux/string.h> + + +/* We handle nothing here except the C locale. Since this is used in + only one place, on strings known to contain only 7 bit ASCII, this + is ok. */ + +int strcasecmp(const char *a, const char *b) +{ + int ca, cb; + + do { + ca = *a++ & 0xff; + cb = *b++ & 0xff; + if (ca >= 'A' && ca <= 'Z') + ca += 'a' - 'A'; + if (cb >= 'A' && cb <= 'Z') + cb += 'a' - 'A'; + } while (ca == cb && ca != '\0'); + + return ca - cb; +} diff --git a/arch/sh/lib/strlen.S b/arch/sh/lib/strlen.S new file mode 100644 index 00000000000..f8ab296047b --- /dev/null +++ b/arch/sh/lib/strlen.S @@ -0,0 +1,70 @@ +/* $Id: strlen.S,v 1.2 2001/06/29 14:07:15 gniibe Exp $ + * + * "strlen" implementation of SuperH + * + * Copyright (C) 1999 Kaz Kojima + * + */ + +/* size_t strlen (const char *s) */ + +#include <linux/linkage.h> +ENTRY(strlen) + mov r4,r0 + and #3,r0 + tst r0,r0 + bt/s 1f + mov #0,r2 + + add #-1,r0 + shll2 r0 + shll r0 + braf r0 + nop + + mov.b @r4+,r1 + tst r1,r1 + bt 8f + add #1,r2 + + mov.b @r4+,r1 + tst r1,r1 + bt 8f + add #1,r2 + + mov.b @r4+,r1 + tst r1,r1 + bt 8f + add #1,r2 + +1: + mov #0,r3 +2: + mov.l @r4+,r1 + cmp/str r3,r1 + bf/s 2b + add #4,r2 + + add #-4,r2 +#ifndef __LITTLE_ENDIAN__ + swap.b r1,r1 + swap.w r1,r1 + swap.b r1,r1 +#endif + extu.b r1,r0 + tst r0,r0 + bt/s 8f + shlr8 r1 + add #1,r2 + extu.b r1,r0 + tst r0,r0 + bt/s 8f + shlr8 r1 + add #1,r2 + extu.b r1,r0 + tst r0,r0 + bt 8f + add #1,r2 +8: + rts + mov r2,r0 diff --git a/arch/sh/lib/udivdi3.c b/arch/sh/lib/udivdi3.c new file mode 100644 index 00000000000..68f038bf3c5 --- /dev/null +++ b/arch/sh/lib/udivdi3.c @@ -0,0 +1,16 @@ +/* + * Simple __udivdi3 function which doesn't use FPU. + */ + +#include <linux/types.h> + +extern u64 __xdiv64_32(u64 n, u32 d); +extern void panic(const char * fmt, ...); + +u64 __udivdi3(u64 n, u64 d) +{ + if (d & ~0xffffffff) + panic("Need true 64-bit/64-bit division"); + return __xdiv64_32(n, (u32)d); +} + diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile new file mode 100644 index 00000000000..9489a142464 --- /dev/null +++ b/arch/sh/mm/Makefile @@ -0,0 +1,25 @@ +# +# Makefile for the Linux SuperH-specific parts of the memory manager. +# + +obj-y := init.o extable.o consistent.o + +obj-$(CONFIG_CPU_SH2) += cache-sh2.o +obj-$(CONFIG_CPU_SH3) += cache-sh3.o +obj-$(CONFIG_CPU_SH4) += cache-sh4.o pg-sh4.o + +obj-$(CONFIG_DMA_PAGE_OPS) += pg-dma.o +obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o + +mmu-y := fault-nommu.o tlb-nommu.o pg-nommu.o +mmu-$(CONFIG_MMU) := fault.o clear_page.o copy_page.o + +obj-y += $(mmu-y) + +ifdef CONFIG_MMU +obj-$(CONFIG_CPU_SH3) += tlb-sh3.o +obj-$(CONFIG_CPU_SH4) += tlb-sh4.o ioremap.o +obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o +endif + +obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c new file mode 100644 index 00000000000..2689cb24ea2 --- /dev/null +++ b/arch/sh/mm/cache-sh2.c @@ -0,0 +1,50 @@ +/* + * arch/sh/mm/cache-sh2.c + * + * Copyright (C) 2002 Paul Mundt + * + * Released under the terms of the GNU GPL v2.0. + */ +#include <linux/init.h> +#include <linux/mm.h> + +#include <asm/cache.h> +#include <asm/addrspace.h> +#include <asm/processor.h> +#include <asm/cacheflush.h> +#include <asm/io.h> + +/* + * Calculate the OC address and set the way bit on the SH-2. + * + * We must have already jump_to_P2()'ed prior to calling this + * function, since we rely on CCR manipulation to do the + * Right Thing(tm). + */ +unsigned long __get_oc_addr(unsigned long set, unsigned long way) +{ + unsigned long ccr; + + /* + * On SH-2 the way bit isn't tracked in the address field + * if we're doing address array access .. instead, we need + * to manually switch out the way in the CCR. + */ + ccr = ctrl_inl(CCR); + ccr &= ~0x00c0; + ccr |= way << cpu_data->dcache.way_shift; + + /* + * Despite the number of sets being halved, we end up losing + * the first 2 ways to OCRAM instead of the last 2 (if we're + * 4-way). As a result, forcibly setting the W1 bit handily + * bumps us up 2 ways. + */ + if (ccr & CCR_CACHE_ORA) + ccr |= 1 << (cpu_data->dcache.way_shift + 1); + + ctrl_outl(ccr, CCR); + + return CACHE_OC_ADDRESS_ARRAY | (set << cpu_data->dcache.entry_shift); +} + diff --git a/arch/sh/mm/cache-sh3.c b/arch/sh/mm/cache-sh3.c new file mode 100644 index 00000000000..838731fc608 --- /dev/null +++ b/arch/sh/mm/cache-sh3.c @@ -0,0 +1,100 @@ +/* + * arch/sh/mm/cache-sh3.c + * + * Copyright (C) 1999, 2000 Niibe Yutaka + * Copyright (C) 2002 Paul Mundt + * + * Released under the terms of the GNU GPL v2.0. + */ + +#include <linux/init.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/threads.h> +#include <asm/addrspace.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> +#include <asm/cacheflush.h> + +/* + * Write back the dirty D-caches, but not invalidate them. + * + * Is this really worth it, or should we just alias this routine + * to __flush_purge_region too? + * + * START: Virtual Address (U0, P1, or P3) + * SIZE: Size of the region. + */ + +void __flush_wback_region(void *start, int size) +{ + unsigned long v, j; + unsigned long begin, end; + unsigned long flags; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + unsigned long addrstart = CACHE_OC_ADDRESS_ARRAY; + for (j = 0; j < cpu_data->dcache.ways; j++) { + unsigned long data, addr, p; + + p = __pa(v); + addr = addrstart | (v & cpu_data->dcache.entry_mask); + local_irq_save(flags); + data = ctrl_inl(addr); + + if ((data & CACHE_PHYSADDR_MASK) == + (p & CACHE_PHYSADDR_MASK)) { + data &= ~SH_CACHE_UPDATED; + ctrl_outl(data, addr); + local_irq_restore(flags); + break; + } + local_irq_restore(flags); + addrstart += cpu_data->dcache.way_incr; + } + } +} + +/* + * Write back the dirty D-caches and invalidate them. + * + * START: Virtual Address (U0, P1, or P3) + * SIZE: Size of the region. + */ +void __flush_purge_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + unsigned long data, addr; + + data = (v & 0xfffffc00); /* _Virtual_ address, ~U, ~V */ + addr = CACHE_OC_ADDRESS_ARRAY | + (v & cpu_data->dcache.entry_mask) | SH_CACHE_ASSOC; + ctrl_outl(data, addr); + } +} + +/* + * No write back please + * + * Except I don't think there's any way to avoid the writeback. So we + * just alias it to __flush_purge_region(). dwmw2. + */ +void __flush_invalidate_region(void *start, int size) + __attribute__((alias("__flush_purge_region"))); diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c new file mode 100644 index 00000000000..ab833adf28c --- /dev/null +++ b/arch/sh/mm/cache-sh4.c @@ -0,0 +1,362 @@ +/* + * arch/sh/mm/cache-sh4.c + * + * Copyright (C) 1999, 2000, 2002 Niibe Yutaka + * Copyright (C) 2001, 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2003 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/threads.h> +#include <asm/addrspace.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> +#include <asm/cacheflush.h> + +extern void __flush_cache_4096_all(unsigned long start); +static void __flush_cache_4096_all_ex(unsigned long start); +extern void __flush_dcache_all(void); +static void __flush_dcache_all_ex(void); + +/* + * SH-4 has virtually indexed and physically tagged cache. + */ + +struct semaphore p3map_sem[4]; + +void __init p3_cache_init(void) +{ + if (remap_area_pages(P3SEG, 0, PAGE_SIZE*4, _PAGE_CACHABLE)) + panic("%s failed.", __FUNCTION__); + + sema_init (&p3map_sem[0], 1); + sema_init (&p3map_sem[1], 1); + sema_init (&p3map_sem[2], 1); + sema_init (&p3map_sem[3], 1); +} + +/* + * Write back the dirty D-caches, but not invalidate them. + * + * START: Virtual Address (U0, P1, or P3) + * SIZE: Size of the region. + */ +void __flush_wback_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + asm volatile("ocbwb %0" + : /* no output */ + : "m" (__m(v))); + } +} + +/* + * Write back the dirty D-caches and invalidate them. + * + * START: Virtual Address (U0, P1, or P3) + * SIZE: Size of the region. + */ +void __flush_purge_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + asm volatile("ocbp %0" + : /* no output */ + : "m" (__m(v))); + } +} + + +/* + * No write back please + */ +void __flush_invalidate_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + asm volatile("ocbi %0" + : /* no output */ + : "m" (__m(v))); + } +} + +static void __flush_dcache_all_ex(void) +{ + unsigned long addr, end_addr, entry_offset; + + end_addr = CACHE_OC_ADDRESS_ARRAY + (cpu_data->dcache.sets << cpu_data->dcache.entry_shift) * cpu_data->dcache.ways; + entry_offset = 1 << cpu_data->dcache.entry_shift; + for (addr = CACHE_OC_ADDRESS_ARRAY; addr < end_addr; addr += entry_offset) { + ctrl_outl(0, addr); + } +} + +static void __flush_cache_4096_all_ex(unsigned long start) +{ + unsigned long addr, entry_offset; + int i; + + entry_offset = 1 << cpu_data->dcache.entry_shift; + for (i = 0; i < cpu_data->dcache.ways; i++, start += cpu_data->dcache.way_incr) { + for (addr = CACHE_OC_ADDRESS_ARRAY + start; + addr < CACHE_OC_ADDRESS_ARRAY + 4096 + start; + addr += entry_offset) { + ctrl_outl(0, addr); + } + } +} + +void flush_cache_4096_all(unsigned long start) +{ + if (cpu_data->dcache.ways == 1) + __flush_cache_4096_all(start); + else + __flush_cache_4096_all_ex(start); +} + +/* + * Write back the range of D-cache, and purge the I-cache. + * + * Called from kernel/module.c:sys_init_module and routine for a.out format. + */ +void flush_icache_range(unsigned long start, unsigned long end) +{ + flush_cache_all(); +} + +/* + * Write back the D-cache and purge the I-cache for signal trampoline. + * .. which happens to be the same behavior as flush_icache_range(). + * So, we simply flush out a line. + */ +void flush_cache_sigtramp(unsigned long addr) +{ + unsigned long v, index; + unsigned long flags; + int i; + + v = addr & ~(L1_CACHE_BYTES-1); + asm volatile("ocbwb %0" + : /* no output */ + : "m" (__m(v))); + + index = CACHE_IC_ADDRESS_ARRAY | (v & cpu_data->icache.entry_mask); + + local_irq_save(flags); + jump_to_P2(); + for(i = 0; i < cpu_data->icache.ways; i++, index += cpu_data->icache.way_incr) + ctrl_outl(0, index); /* Clear out Valid-bit */ + back_to_P1(); + local_irq_restore(flags); +} + +static inline void flush_cache_4096(unsigned long start, + unsigned long phys) +{ + unsigned long flags; + extern void __flush_cache_4096(unsigned long addr, unsigned long phys, unsigned long exec_offset); + + /* + * SH7751, SH7751R, and ST40 have no restriction to handle cache. + * (While SH7750 must do that at P2 area.) + */ + if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG) + || start < CACHE_OC_ADDRESS_ARRAY) { + local_irq_save(flags); + __flush_cache_4096(start | SH_CACHE_ASSOC, P1SEGADDR(phys), 0x20000000); + local_irq_restore(flags); + } else { + __flush_cache_4096(start | SH_CACHE_ASSOC, P1SEGADDR(phys), 0); + } +} + +/* + * Write back & invalidate the D-cache of the page. + * (To avoid "alias" issues) + */ +void flush_dcache_page(struct page *page) +{ + if (test_bit(PG_mapped, &page->flags)) { + unsigned long phys = PHYSADDR(page_address(page)); + + /* Loop all the D-cache */ + flush_cache_4096(CACHE_OC_ADDRESS_ARRAY, phys); + flush_cache_4096(CACHE_OC_ADDRESS_ARRAY | 0x1000, phys); + flush_cache_4096(CACHE_OC_ADDRESS_ARRAY | 0x2000, phys); + flush_cache_4096(CACHE_OC_ADDRESS_ARRAY | 0x3000, phys); + } +} + +static inline void flush_icache_all(void) +{ + unsigned long flags, ccr; + + local_irq_save(flags); + jump_to_P2(); + + /* Flush I-cache */ + ccr = ctrl_inl(CCR); + ccr |= CCR_CACHE_ICI; + ctrl_outl(ccr, CCR); + + back_to_P1(); + local_irq_restore(flags); +} + +void flush_cache_all(void) +{ + if (cpu_data->dcache.ways == 1) + __flush_dcache_all(); + else + __flush_dcache_all_ex(); + flush_icache_all(); +} + +void flush_cache_mm(struct mm_struct *mm) +{ + /* Is there any good way? */ + /* XXX: possibly call flush_cache_range for each vm area */ + /* + * FIXME: Really, the optimal solution here would be able to flush out + * individual lines created by the specified context, but this isn't + * feasible for a number of architectures (such as MIPS, and some + * SPARC) .. is this possible for SuperH? + * + * In the meantime, we'll just flush all of the caches.. this + * seems to be the simplest way to avoid at least a few wasted + * cache flushes. -Lethal + */ + flush_cache_all(); +} + +/* + * Write back and invalidate I/D-caches for the page. + * + * ADDR: Virtual Address (U0 address) + * PFN: Physical page number + */ +void flush_cache_page(struct vm_area_struct *vma, unsigned long address, unsigned long pfn) +{ + unsigned long phys = pfn << PAGE_SHIFT; + + /* We only need to flush D-cache when we have alias */ + if ((address^phys) & CACHE_ALIAS) { + /* Loop 4K of the D-cache */ + flush_cache_4096( + CACHE_OC_ADDRESS_ARRAY | (address & CACHE_ALIAS), + phys); + /* Loop another 4K of the D-cache */ + flush_cache_4096( + CACHE_OC_ADDRESS_ARRAY | (phys & CACHE_ALIAS), + phys); + } + + if (vma->vm_flags & VM_EXEC) + /* Loop 4K (half) of the I-cache */ + flush_cache_4096( + CACHE_IC_ADDRESS_ARRAY | (address & 0x1000), + phys); +} + +/* + * Write back and invalidate D-caches. + * + * START, END: Virtual Address (U0 address) + * + * NOTE: We need to flush the _physical_ page entry. + * Flushing the cache lines for U0 only isn't enough. + * We need to flush for P1 too, which may contain aliases. + */ +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + unsigned long p = start & PAGE_MASK; + pgd_t *dir; + pmd_t *pmd; + pte_t *pte; + pte_t entry; + unsigned long phys; + unsigned long d = 0; + + dir = pgd_offset(vma->vm_mm, p); + pmd = pmd_offset(dir, p); + + do { + if (pmd_none(*pmd) || pmd_bad(*pmd)) { + p &= ~((1 << PMD_SHIFT) -1); + p += (1 << PMD_SHIFT); + pmd++; + continue; + } + pte = pte_offset_kernel(pmd, p); + do { + entry = *pte; + if ((pte_val(entry) & _PAGE_PRESENT)) { + phys = pte_val(entry)&PTE_PHYS_MASK; + if ((p^phys) & CACHE_ALIAS) { + d |= 1 << ((p & CACHE_ALIAS)>>12); + d |= 1 << ((phys & CACHE_ALIAS)>>12); + if (d == 0x0f) + goto loop_exit; + } + } + pte++; + p += PAGE_SIZE; + } while (p < end && ((unsigned long)pte & ~PAGE_MASK)); + pmd++; + } while (p < end); + loop_exit: + if (d & 1) + flush_cache_4096_all(0); + if (d & 2) + flush_cache_4096_all(0x1000); + if (d & 4) + flush_cache_4096_all(0x2000); + if (d & 8) + flush_cache_4096_all(0x3000); + if (vma->vm_flags & VM_EXEC) + flush_icache_all(); +} + +/* + * flush_icache_user_range + * @vma: VMA of the process + * @page: page + * @addr: U0 address + * @len: length of the range (< page size) + */ +void flush_icache_user_range(struct vm_area_struct *vma, + struct page *page, unsigned long addr, int len) +{ + flush_cache_page(vma, addr, page_to_pfn(page)); +} + diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c new file mode 100644 index 00000000000..ad8ed7d41e1 --- /dev/null +++ b/arch/sh/mm/cache-sh7705.c @@ -0,0 +1,206 @@ +/* + * arch/sh/mm/cache-sh7705.c + * + * Copyright (C) 1999, 2000 Niibe Yutaka + * Copyright (C) 2004 Alex Song + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#include <linux/init.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/threads.h> +#include <asm/addrspace.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> +#include <asm/cacheflush.h> + +/* The 32KB cache on the SH7705 suffers from the same synonym problem + * as SH4 CPUs */ + +#define __pte_offset(address) \ + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset(dir, address) ((pte_t *) pmd_page_kernel(*(dir)) + \ + __pte_offset(address)) + +static inline void cache_wback_all(void) +{ + unsigned long ways, waysize, addrstart; + + ways = cpu_data->dcache.ways; + waysize = cpu_data->dcache.sets; + waysize <<= cpu_data->dcache.entry_shift; + + addrstart = CACHE_OC_ADDRESS_ARRAY; + + do { + unsigned long addr; + + for (addr = addrstart; + addr < addrstart + waysize; + addr += cpu_data->dcache.linesz) { + unsigned long data; + int v = SH_CACHE_UPDATED | SH_CACHE_VALID; + + data = ctrl_inl(addr); + + if ((data & v) == v) + ctrl_outl(data & ~v, addr); + + } + + addrstart += cpu_data->dcache.way_incr; + } while (--ways); +} + +/* + * Write back the range of D-cache, and purge the I-cache. + * + * Called from kernel/module.c:sys_init_module and routine for a.out format. + */ +void flush_icache_range(unsigned long start, unsigned long end) +{ + __flush_wback_region((void *)start, end - start); +} + + +/* + * Writeback&Invalidate the D-cache of the page + */ +static void __flush_dcache_page(unsigned long phys) +{ + unsigned long ways, waysize, addrstart; + unsigned long flags; + + phys |= SH_CACHE_VALID; + + /* + * Here, phys is the physical address of the page. We check all the + * tags in the cache for those with the same page number as this page + * (by masking off the lowest 2 bits of the 19-bit tag; these bits are + * derived from the offset within in the 4k page). Matching valid + * entries are invalidated. + * + * Since 2 bits of the cache index are derived from the virtual page + * number, knowing this would reduce the number of cache entries to be + * searched by a factor of 4. However this function exists to deal with + * potential cache aliasing, therefore the optimisation is probably not + * possible. + */ + local_irq_save(flags); + jump_to_P2(); + + ways = cpu_data->dcache.ways; + waysize = cpu_data->dcache.sets; + waysize <<= cpu_data->dcache.entry_shift; + + addrstart = CACHE_OC_ADDRESS_ARRAY; + + do { + unsigned long addr; + + for (addr = addrstart; + addr < addrstart + waysize; + addr += cpu_data->dcache.linesz) { + unsigned long data; + + data = ctrl_inl(addr) & (0x1ffffC00 | SH_CACHE_VALID); + if (data == phys) { + data &= ~(SH_CACHE_VALID | SH_CACHE_UPDATED); + ctrl_outl(data, addr); + } + } + + addrstart += cpu_data->dcache.way_incr; + } while (--ways); + + back_to_P1(); + local_irq_restore(flags); +} + + +/* + * Write back & invalidate the D-cache of the page. + * (To avoid "alias" issues) + */ +void flush_dcache_page(struct page *page) +{ + if (test_bit(PG_mapped, &page->flags)) + __flush_dcache_page(PHYSADDR(page_address(page))); +} + +void flush_cache_all(void) +{ + unsigned long flags; + + local_irq_save(flags); + jump_to_P2(); + + cache_wback_all(); + back_to_P1(); + local_irq_restore(flags); +} + +void flush_cache_mm(struct mm_struct *mm) +{ + /* Is there any good way? */ + /* XXX: possibly call flush_cache_range for each vm area */ + flush_cache_all(); +} + +/* + * Write back and invalidate D-caches. + * + * START, END: Virtual Address (U0 address) + * + * NOTE: We need to flush the _physical_ page entry. + * Flushing the cache lines for U0 only isn't enough. + * We need to flush for P1 too, which may contain aliases. + */ +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + + /* + * We could call flush_cache_page for the pages of these range, + * but it's not efficient (scan the caches all the time...). + * + * We can't use A-bit magic, as there's the case we don't have + * valid entry on TLB. + */ + flush_cache_all(); +} + +/* + * Write back and invalidate I/D-caches for the page. + * + * ADDRESS: Virtual Address (U0 address) + */ +void flush_cache_page(struct vm_area_struct *vma, unsigned long address, unsigned long pfn) +{ + __flush_dcache_page(pfn << PAGE_SHIFT); +} + +/* + * This is called when a page-cache page is about to be mapped into a + * user process' address space. It offers an opportunity for a + * port to ensure d-cache/i-cache coherency if necessary. + * + * Not entirely sure why this is necessary on SH3 with 32K cache but + * without it we get occasional "Memory fault" when loading a program. + */ +void flush_icache_page(struct vm_area_struct *vma, struct page *page) +{ + __flush_purge_region(page_address(page), PAGE_SIZE); +} + diff --git a/arch/sh/mm/clear_page.S b/arch/sh/mm/clear_page.S new file mode 100644 index 00000000000..ae58a61f0e6 --- /dev/null +++ b/arch/sh/mm/clear_page.S @@ -0,0 +1,295 @@ +/* $Id: clear_page.S,v 1.13 2003/08/25 17:03:10 lethal Exp $ + * + * __clear_user_page, __clear_user, clear_page implementation of SuperH + * + * Copyright (C) 2001 Kaz Kojima + * Copyright (C) 2001, 2002 Niibe Yutaka + * + */ +#include <linux/config.h> +#include <linux/linkage.h> + +/* + * clear_page_slow + * @to: P1 address + * + * void clear_page_slow(void *to) + */ + +/* + * r0 --- scratch + * r4 --- to + * r5 --- to + 4096 + */ +ENTRY(clear_page_slow) + mov r4,r5 + mov.w .Llimit,r0 + add r0,r5 + mov #0,r0 + ! +1: +#if defined(CONFIG_CPU_SH3) + mov.l r0,@r4 +#elif defined(CONFIG_CPU_SH4) + movca.l r0,@r4 + mov r4,r1 +#endif + add #32,r4 + mov.l r0,@-r4 + mov.l r0,@-r4 + mov.l r0,@-r4 + mov.l r0,@-r4 + mov.l r0,@-r4 + mov.l r0,@-r4 + mov.l r0,@-r4 +#if defined(CONFIG_CPU_SH4) + ocbwb @r1 +#endif + cmp/eq r5,r4 + bf/s 1b + add #28,r4 + ! + rts + nop +.Llimit: .word (4096-28) + +ENTRY(__clear_user) + ! + mov #0, r0 + mov #0xe0, r1 ! 0xffffffe0 + ! + ! r4..(r4+31)&~32 -------- not aligned [ Area 0 ] + ! (r4+31)&~32..(r4+r5)&~32 -------- aligned [ Area 1 ] + ! (r4+r5)&~32..r4+r5 -------- not aligned [ Area 2 ] + ! + ! Clear area 0 + mov r4, r2 + ! + tst r1, r5 ! length < 32 + bt .Larea2 ! skip to remainder + ! + add #31, r2 + and r1, r2 + cmp/eq r4, r2 + bt .Larea1 + mov r2, r3 + sub r4, r3 + mov r3, r7 + mov r4, r2 + ! +.L0: dt r3 +0: mov.b r0, @r2 + bf/s .L0 + add #1, r2 + ! + sub r7, r5 + mov r2, r4 +.Larea1: + mov r4, r3 + add r5, r3 + and r1, r3 + cmp/hi r2, r3 + bf .Larea2 + ! + ! Clear area 1 +#if defined(CONFIG_CPU_SH4) +1: movca.l r0, @r2 +#else +1: mov.l r0, @r2 +#endif + add #4, r2 +2: mov.l r0, @r2 + add #4, r2 +3: mov.l r0, @r2 + add #4, r2 +4: mov.l r0, @r2 + add #4, r2 +5: mov.l r0, @r2 + add #4, r2 +6: mov.l r0, @r2 + add #4, r2 +7: mov.l r0, @r2 + add #4, r2 +8: mov.l r0, @r2 + add #4, r2 + cmp/hi r2, r3 + bt/s 1b + nop + ! + ! Clear area 2 +.Larea2: + mov r4, r3 + add r5, r3 + cmp/hs r3, r2 + bt/s .Ldone + sub r2, r3 +.L2: dt r3 +9: mov.b r0, @r2 + bf/s .L2 + add #1, r2 + ! +.Ldone: rts + mov #0, r0 ! return 0 as normal return + + ! return the number of bytes remained +.Lbad_clear_user: + mov r4, r0 + add r5, r0 + rts + sub r2, r0 + +.section __ex_table,"a" + .align 2 + .long 0b, .Lbad_clear_user + .long 1b, .Lbad_clear_user + .long 2b, .Lbad_clear_user + .long 3b, .Lbad_clear_user + .long 4b, .Lbad_clear_user + .long 5b, .Lbad_clear_user + .long 6b, .Lbad_clear_user + .long 7b, .Lbad_clear_user + .long 8b, .Lbad_clear_user + .long 9b, .Lbad_clear_user +.previous + +#if defined(CONFIG_CPU_SH4) +/* + * __clear_user_page + * @to: P3 address (with same color) + * @orig_to: P1 address + * + * void __clear_user_page(void *to, void *orig_to) + */ + +/* + * r0 --- scratch + * r4 --- to + * r5 --- orig_to + * r6 --- to + 4096 + */ +ENTRY(__clear_user_page) + mov.w .L4096,r0 + mov r4,r6 + add r0,r6 + mov #0,r0 + ! +1: ocbi @r5 + add #32,r5 + movca.l r0,@r4 + mov r4,r1 + add #32,r4 + mov.l r0,@-r4 + mov.l r0,@-r4 + mov.l r0,@-r4 + mov.l r0,@-r4 + mov.l r0,@-r4 + mov.l r0,@-r4 + mov.l r0,@-r4 + add #28,r4 + cmp/eq r6,r4 + bf/s 1b + ocbwb @r1 + ! + rts + nop +.L4096: .word 4096 + +ENTRY(__flush_cache_4096) + mov.l 1f,r3 + add r6,r3 + mov r4,r0 + mov #64,r2 + shll r2 + mov #64,r6 + jmp @r3 + mov #96,r7 + .align 2 +1: .long 2f +2: + .rept 32 + mov.l r5,@r0 + mov.l r5,@(32,r0) + mov.l r5,@(r0,r6) + mov.l r5,@(r0,r7) + add r2,r5 + add r2,r0 + .endr + nop + nop + nop + nop + nop + nop + nop + rts + nop + +ENTRY(__flush_dcache_all) + mov.l 2f,r0 + mov.l 3f,r4 + and r0,r4 ! r4 = (unsigned long)&empty_zero_page[0] & ~0xffffc000 + stc sr,r1 ! save SR + mov.l 4f,r2 + or r1,r2 + mov #32,r3 + shll2 r3 +1: + ldc r2,sr ! set BL bit + movca.l r0,@r4 + ocbi @r4 + add #32,r4 + movca.l r0,@r4 + ocbi @r4 + add #32,r4 + movca.l r0,@r4 + ocbi @r4 + add #32,r4 + movca.l r0,@r4 + ocbi @r4 + ldc r1,sr ! restore SR + dt r3 + bf/s 1b + add #32,r4 + + rts + nop + .align 2 +2: .long 0xffffc000 +3: .long empty_zero_page +4: .long 0x10000000 ! BL bit + +/* __flush_cache_4096_all(unsigned long addr) */ +ENTRY(__flush_cache_4096_all) + mov.l 2f,r0 + mov.l 3f,r2 + and r0,r2 + or r2,r4 ! r4 = addr | (unsigned long)&empty_zero_page[0] & ~0x3fff + stc sr,r1 ! save SR + mov.l 4f,r2 + or r1,r2 + mov #32,r3 +1: + ldc r2,sr ! set BL bit + movca.l r0,@r4 + ocbi @r4 + add #32,r4 + movca.l r0,@r4 + ocbi @r4 + add #32,r4 + movca.l r0,@r4 + ocbi @r4 + add #32,r4 + movca.l r0,@r4 + ocbi @r4 + ldc r1,sr ! restore SR + dt r3 + bf/s 1b + add #32,r4 + + rts + nop + .align 2 +2: .long 0xffffc000 +3: .long empty_zero_page +4: .long 0x10000000 ! BL bit +#endif diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c new file mode 100644 index 00000000000..1f7af0c73cf --- /dev/null +++ b/arch/sh/mm/consistent.c @@ -0,0 +1,85 @@ +/* + * arch/sh/mm/consistent.c + * + * Copyright (C) 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/mm.h> +#include <linux/dma-mapping.h> +#include <asm/io.h> + +void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle) +{ + struct page *page, *end, *free; + void *ret; + int order; + + size = PAGE_ALIGN(size); + order = get_order(size); + + page = alloc_pages(gfp, order); + if (!page) + return NULL; + + ret = page_address(page); + *handle = virt_to_phys(ret); + + /* + * We must flush the cache before we pass it on to the device + */ + dma_cache_wback_inv(ret, size); + + page = virt_to_page(ret); + free = page + (size >> PAGE_SHIFT); + end = page + (1 << order); + + while (++page < end) { + set_page_count(page, 1); + + /* Free any unused pages */ + if (page >= free) { + __free_page(page); + } + } + + return P2SEGADDR(ret); +} + +void consistent_free(void *vaddr, size_t size) +{ + unsigned long addr = P1SEGADDR((unsigned long)vaddr); + struct page *page=virt_to_page(addr); + int num_pages=(size+PAGE_SIZE-1) >> PAGE_SHIFT; + int i; + + for(i=0;i<num_pages;i++) { + __free_page((page+i)); + } +} + +void consistent_sync(void *vaddr, size_t size, int direction) +{ + void * p1addr = (void*) P1SEGADDR((unsigned long)vaddr); + + switch (direction) { + case DMA_FROM_DEVICE: /* invalidate only */ + dma_cache_inv(p1addr, size); + break; + case DMA_TO_DEVICE: /* writeback only */ + dma_cache_wback(p1addr, size); + break; + case DMA_BIDIRECTIONAL: /* writeback and invalidate */ + dma_cache_wback_inv(p1addr, size); + break; + default: + BUG(); + } +} + +EXPORT_SYMBOL(consistent_alloc); +EXPORT_SYMBOL(consistent_free); +EXPORT_SYMBOL(consistent_sync); + diff --git a/arch/sh/mm/copy_page.S b/arch/sh/mm/copy_page.S new file mode 100644 index 00000000000..1addffe117c --- /dev/null +++ b/arch/sh/mm/copy_page.S @@ -0,0 +1,397 @@ +/* $Id: copy_page.S,v 1.8 2003/08/25 17:03:10 lethal Exp $ + * + * copy_page, __copy_user_page, __copy_user implementation of SuperH + * + * Copyright (C) 2001 Niibe Yutaka & Kaz Kojima + * Copyright (C) 2002 Toshinobu Sugioka + * + */ +#include <linux/linkage.h> + +/* + * copy_page_slow + * @to: P1 address + * @from: P1 address + * + * void copy_page_slow(void *to, void *from) + */ + +/* + * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch + * r8 --- from + 4096 + * r9 --- not used + * r10 --- to + * r11 --- from + */ +ENTRY(copy_page_slow) + mov.l r8,@-r15 + mov.l r10,@-r15 + mov.l r11,@-r15 + mov r4,r10 + mov r5,r11 + mov r5,r8 + mov.w .L4096,r0 + add r0,r8 + ! +1: mov.l @r11+,r0 + mov.l @r11+,r1 + mov.l @r11+,r2 + mov.l @r11+,r3 + mov.l @r11+,r4 + mov.l @r11+,r5 + mov.l @r11+,r6 + mov.l @r11+,r7 +#if defined(CONFIG_CPU_SH3) + mov.l r0,@r10 +#elif defined(CONFIG_CPU_SH4) + movca.l r0,@r10 + mov r10,r0 +#endif + add #32,r10 + mov.l r7,@-r10 + mov.l r6,@-r10 + mov.l r5,@-r10 + mov.l r4,@-r10 + mov.l r3,@-r10 + mov.l r2,@-r10 + mov.l r1,@-r10 +#if defined(CONFIG_CPU_SH4) + ocbwb @r0 +#endif + cmp/eq r11,r8 + bf/s 1b + add #28,r10 + ! + mov.l @r15+,r11 + mov.l @r15+,r10 + mov.l @r15+,r8 + rts + nop + +#if defined(CONFIG_CPU_SH4) +/* + * __copy_user_page + * @to: P1 address (with same color) + * @from: P1 address + * @orig_to: P1 address + * + * void __copy_user_page(void *to, void *from, void *orig_to) + */ + +/* + * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch + * r8 --- from + 4096 + * r9 --- orig_to + * r10 --- to + * r11 --- from + */ +ENTRY(__copy_user_page) + mov.l r8,@-r15 + mov.l r9,@-r15 + mov.l r10,@-r15 + mov.l r11,@-r15 + mov r4,r10 + mov r5,r11 + mov r6,r9 + mov r5,r8 + mov.w .L4096,r0 + add r0,r8 + ! +1: ocbi @r9 + add #32,r9 + mov.l @r11+,r0 + mov.l @r11+,r1 + mov.l @r11+,r2 + mov.l @r11+,r3 + mov.l @r11+,r4 + mov.l @r11+,r5 + mov.l @r11+,r6 + mov.l @r11+,r7 + movca.l r0,@r10 + mov r10,r0 + add #32,r10 + mov.l r7,@-r10 + mov.l r6,@-r10 + mov.l r5,@-r10 + mov.l r4,@-r10 + mov.l r3,@-r10 + mov.l r2,@-r10 + mov.l r1,@-r10 + ocbwb @r0 + cmp/eq r11,r8 + bf/s 1b + add #28,r10 + ! + mov.l @r15+,r11 + mov.l @r15+,r10 + mov.l @r15+,r9 + mov.l @r15+,r8 + rts + nop +#endif +.L4096: .word 4096 +/* + * __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); + * Return the number of bytes NOT copied + */ +#define EX(...) \ + 9999: __VA_ARGS__ ; \ + .section __ex_table, "a"; \ + .long 9999b, 6000f ; \ + .previous +ENTRY(__copy_user) + tst r6,r6 ! Check explicitly for zero + bf 1f + rts + mov #0,r0 ! normal return +1: + mov.l r10,@-r15 + mov.l r9,@-r15 + mov.l r8,@-r15 + mov r4,r3 + add r6,r3 ! last destination address + mov #12,r0 ! Check if small number of bytes + cmp/gt r0,r6 + bt 2f + bra .L_cleanup_loop + nop +2: + neg r5,r0 ! Calculate bytes needed to align source + add #4,r0 + and #3,r0 + tst r0,r0 + bt .L_jump + mov r0,r1 + +.L_loop1: + ! Copy bytes to align source +EX( mov.b @r5+,r0 ) + dt r1 +EX( mov.b r0,@r4 ) + add #-1,r6 + bf/s .L_loop1 + add #1,r4 + +.L_jump: + mov r6,r2 ! Calculate number of longwords to copy + shlr2 r2 + tst r2,r2 + bt .L_cleanup + + mov r4,r0 ! Jump to appropriate routine + and #3,r0 + mov r0,r1 + shll2 r1 + mova .L_jump_tbl,r0 + mov.l @(r0,r1),r1 + jmp @r1 + nop + + .align 2 +.L_jump_tbl: + .long .L_dest00 + .long .L_dest01 + .long .L_dest10 + .long .L_dest11 + +! Destination = 00 + +.L_dest00: + mov r2,r7 + shlr2 r7 + shlr r7 + tst r7,r7 + mov #7,r0 + bt/s 1f + and r0,r2 + .align 2 +2: +EX( mov.l @r5+,r0 ) +EX( mov.l @r5+,r8 ) +EX( mov.l @r5+,r9 ) +EX( mov.l @r5+,r10 ) +EX( mov.l r0,@r4 ) +EX( mov.l r8,@(4,r4) ) +EX( mov.l r9,@(8,r4) ) +EX( mov.l r10,@(12,r4) ) +EX( mov.l @r5+,r0 ) +EX( mov.l @r5+,r8 ) +EX( mov.l @r5+,r9 ) +EX( mov.l @r5+,r10 ) + dt r7 +EX( mov.l r0,@(16,r4) ) +EX( mov.l r8,@(20,r4) ) +EX( mov.l r9,@(24,r4) ) +EX( mov.l r10,@(28,r4) ) + bf/s 2b + add #32,r4 + tst r2,r2 + bt .L_cleanup +1: +EX( mov.l @r5+,r0 ) + dt r2 +EX( mov.l r0,@r4 ) + bf/s 1b + add #4,r4 + + bra .L_cleanup + nop + +! Destination = 10 + +.L_dest10: + mov r2,r7 + shlr2 r7 + shlr r7 + tst r7,r7 + mov #7,r0 + bt/s 1f + and r0,r2 +2: + dt r7 +#ifdef __LITTLE_ENDIAN__ +EX( mov.l @r5+,r0 ) +EX( mov.l @r5+,r1 ) +EX( mov.l @r5+,r8 ) +EX( mov.l @r5+,r9 ) +EX( mov.l @r5+,r10 ) +EX( mov.w r0,@r4 ) + add #2,r4 + xtrct r1,r0 + xtrct r8,r1 + xtrct r9,r8 + xtrct r10,r9 + +EX( mov.l r0,@r4 ) +EX( mov.l r1,@(4,r4) ) +EX( mov.l r8,@(8,r4) ) +EX( mov.l r9,@(12,r4) ) + +EX( mov.l @r5+,r1 ) +EX( mov.l @r5+,r8 ) +EX( mov.l @r5+,r0 ) + xtrct r1,r10 + xtrct r8,r1 + xtrct r0,r8 + shlr16 r0 +EX( mov.l r10,@(16,r4) ) +EX( mov.l r1,@(20,r4) ) +EX( mov.l r8,@(24,r4) ) +EX( mov.w r0,@(28,r4) ) + bf/s 2b + add #30,r4 +#else +EX( mov.l @(28,r5),r0 ) +EX( mov.l @(24,r5),r8 ) +EX( mov.l @(20,r5),r9 ) +EX( mov.l @(16,r5),r10 ) +EX( mov.w r0,@(30,r4) ) + add #-2,r4 + xtrct r8,r0 + xtrct r9,r8 + xtrct r10,r9 +EX( mov.l r0,@(28,r4) ) +EX( mov.l r8,@(24,r4) ) +EX( mov.l r9,@(20,r4) ) + +EX( mov.l @(12,r5),r0 ) +EX( mov.l @(8,r5),r8 ) + xtrct r0,r10 +EX( mov.l @(4,r5),r9 ) + mov.l r10,@(16,r4) +EX( mov.l @r5,r10 ) + xtrct r8,r0 + xtrct r9,r8 + xtrct r10,r9 +EX( mov.l r0,@(12,r4) ) +EX( mov.l r8,@(8,r4) ) + swap.w r10,r0 +EX( mov.l r9,@(4,r4) ) +EX( mov.w r0,@(2,r4) ) + + add #32,r5 + bf/s 2b + add #34,r4 +#endif + tst r2,r2 + bt .L_cleanup + +1: ! Read longword, write two words per iteration +EX( mov.l @r5+,r0 ) + dt r2 +#ifdef __LITTLE_ENDIAN__ +EX( mov.w r0,@r4 ) + shlr16 r0 +EX( mov.w r0,@(2,r4) ) +#else +EX( mov.w r0,@(2,r4) ) + shlr16 r0 +EX( mov.w r0,@r4 ) +#endif + bf/s 1b + add #4,r4 + + bra .L_cleanup + nop + +! Destination = 01 or 11 + +.L_dest01: +.L_dest11: + ! Read longword, write byte, word, byte per iteration +EX( mov.l @r5+,r0 ) + dt r2 +#ifdef __LITTLE_ENDIAN__ +EX( mov.b r0,@r4 ) + shlr8 r0 + add #1,r4 +EX( mov.w r0,@r4 ) + shlr16 r0 +EX( mov.b r0,@(2,r4) ) + bf/s .L_dest01 + add #3,r4 +#else +EX( mov.b r0,@(3,r4) ) + shlr8 r0 + swap.w r0,r7 +EX( mov.b r7,@r4 ) + add #1,r4 +EX( mov.w r0,@r4 ) + bf/s .L_dest01 + add #3,r4 +#endif + +! Cleanup last few bytes +.L_cleanup: + mov r6,r0 + and #3,r0 + tst r0,r0 + bt .L_exit + mov r0,r6 + +.L_cleanup_loop: +EX( mov.b @r5+,r0 ) + dt r6 +EX( mov.b r0,@r4 ) + bf/s .L_cleanup_loop + add #1,r4 + +.L_exit: + mov #0,r0 ! normal return +5000: + +# Exception handler: +.section .fixup, "ax" +6000: + mov.l 8000f,r1 + mov r3,r0 + jmp @r1 + sub r4,r0 + .align 2 +8000: .long 5000b + +.previous + mov.l @r15+,r8 + mov.l @r15+,r9 + rts + mov.l @r15+,r10 diff --git a/arch/sh/mm/extable.c b/arch/sh/mm/extable.c new file mode 100644 index 00000000000..505ede7c21b --- /dev/null +++ b/arch/sh/mm/extable.c @@ -0,0 +1,22 @@ +/* + * linux/arch/sh/mm/extable.c + * Taken from: + * linux/arch/i386/mm/extable.c + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <asm/uaccess.h> + +int fixup_exception(struct pt_regs *regs) +{ + const struct exception_table_entry *fixup; + + fixup = search_exception_tables(regs->pc); + if (fixup) { + regs->pc = fixup->fixup; + return 1; + } + + return 0; +} diff --git a/arch/sh/mm/fault-nommu.c b/arch/sh/mm/fault-nommu.c new file mode 100644 index 00000000000..34d4e0c68fb --- /dev/null +++ b/arch/sh/mm/fault-nommu.c @@ -0,0 +1,82 @@ +/* + * arch/sh/mm/fault-nommu.c + * + * Copyright (C) 2002 Paul Mundt + * + * Based on linux/arch/sh/mm/fault.c: + * Copyright (C) 1999 Niibe Yutaka + * + * Released under the terms of the GNU GPL v2.0. + */ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/interrupt.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> +#include <asm/cacheflush.h> + +#if defined(CONFIG_SH_KGDB) +#include <asm/kgdb.h> +#endif + +extern void die(const char *,struct pt_regs *,long); + +/* + * This routine handles page faults. It determines the address, + * and the problem, and then passes it off to one of the appropriate + * routines. + */ +asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess, + unsigned long address) +{ +#if defined(CONFIG_SH_KGDB) + if (kgdb_nofault && kgdb_bus_err_hook) + kgdb_bus_err_hook(); +#endif + + /* + * Oops. The kernel tried to access some bad page. We'll have to + * terminate things with extreme prejudice. + * + */ + if (address < PAGE_SIZE) { + printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); + } else { + printk(KERN_ALERT "Unable to handle kernel paging request"); + } + + printk(" at virtual address %08lx\n", address); + printk(KERN_ALERT "pc = %08lx\n", regs->pc); + + die("Oops", regs, writeaccess); + do_exit(SIGKILL); +} + +asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess, + unsigned long address) +{ +#if defined(CONFIG_SH_KGDB) + if (kgdb_nofault && kgdb_bus_err_hook) + kgdb_bus_err_hook(); +#endif + + if (address >= TASK_SIZE) + return 1; + + return 0; +} + diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c new file mode 100644 index 00000000000..7abba2161da --- /dev/null +++ b/arch/sh/mm/fault.c @@ -0,0 +1,374 @@ +/* $Id: fault.c,v 1.14 2004/01/13 05:52:11 kkojima Exp $ + * + * linux/arch/sh/mm/fault.c + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * Based on linux/arch/i386/mm/fault.c: + * Copyright (C) 1995 Linus Torvalds + */ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/interrupt.h> +#include <linux/module.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> +#include <asm/cacheflush.h> +#include <asm/kgdb.h> + +extern void die(const char *,struct pt_regs *,long); + +/* + * This routine handles page faults. It determines the address, + * and the problem, and then passes it off to one of the appropriate + * routines. + */ +asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess, + unsigned long address) +{ + struct task_struct *tsk; + struct mm_struct *mm; + struct vm_area_struct * vma; + unsigned long page; + +#ifdef CONFIG_SH_KGDB + if (kgdb_nofault && kgdb_bus_err_hook) + kgdb_bus_err_hook(); +#endif + + tsk = current; + mm = tsk->mm; + + /* + * If we're in an interrupt or have no user + * context, we must not take the fault.. + */ + if (in_atomic() || !mm) + goto no_context; + + down_read(&mm->mmap_sem); + + vma = find_vma(mm, address); + if (!vma) + goto bad_area; + if (vma->vm_start <= address) + goto good_area; + if (!(vma->vm_flags & VM_GROWSDOWN)) + goto bad_area; + if (expand_stack(vma, address)) + goto bad_area; +/* + * Ok, we have a good vm_area for this memory access, so + * we can handle it.. + */ +good_area: + if (writeaccess) { + if (!(vma->vm_flags & VM_WRITE)) + goto bad_area; + } else { + if (!(vma->vm_flags & (VM_READ | VM_EXEC))) + goto bad_area; + } + + /* + * If for any reason at all we couldn't handle the fault, + * make sure we exit gracefully rather than endlessly redo + * the fault. + */ +survive: + switch (handle_mm_fault(mm, vma, address, writeaccess)) { + case VM_FAULT_MINOR: + tsk->min_flt++; + break; + case VM_FAULT_MAJOR: + tsk->maj_flt++; + break; + case VM_FAULT_SIGBUS: + goto do_sigbus; + case VM_FAULT_OOM: + goto out_of_memory; + default: + BUG(); + } + + up_read(&mm->mmap_sem); + return; + +/* + * Something tried to access memory that isn't in our memory map.. + * Fix it, but check if it's kernel or user first.. + */ +bad_area: + up_read(&mm->mmap_sem); + + if (user_mode(regs)) { + tsk->thread.address = address; + tsk->thread.error_code = writeaccess; + force_sig(SIGSEGV, tsk); + return; + } + +no_context: + /* Are we prepared to handle this kernel fault? */ + if (fixup_exception(regs)) + return; + +/* + * Oops. The kernel tried to access some bad page. We'll have to + * terminate things with extreme prejudice. + * + */ + if (address < PAGE_SIZE) + printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); + else + printk(KERN_ALERT "Unable to handle kernel paging request"); + printk(" at virtual address %08lx\n", address); + printk(KERN_ALERT "pc = %08lx\n", regs->pc); + asm volatile("mov.l %1, %0" + : "=r" (page) + : "m" (__m(MMU_TTB))); + if (page) { + page = ((unsigned long *) page)[address >> 22]; + printk(KERN_ALERT "*pde = %08lx\n", page); + if (page & _PAGE_PRESENT) { + page &= PAGE_MASK; + address &= 0x003ff000; + page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT]; + printk(KERN_ALERT "*pte = %08lx\n", page); + } + } + die("Oops", regs, writeaccess); + do_exit(SIGKILL); + +/* + * We ran out of memory, or some other thing happened to us that made + * us unable to handle the page fault gracefully. + */ +out_of_memory: + up_read(&mm->mmap_sem); + if (current->pid == 1) { + yield(); + down_read(&mm->mmap_sem); + goto survive; + } + printk("VM: killing process %s\n", tsk->comm); + if (user_mode(regs)) + do_exit(SIGKILL); + goto no_context; + +do_sigbus: + up_read(&mm->mmap_sem); + + /* + * Send a sigbus, regardless of whether we were in kernel + * or user mode. + */ + tsk->thread.address = address; + tsk->thread.error_code = writeaccess; + tsk->thread.trap_no = 14; + force_sig(SIGBUS, tsk); + + /* Kernel mode? Handle exceptions or die */ + if (!user_mode(regs)) + goto no_context; +} + +/* + * Called with interrupt disabled. + */ +asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess, + unsigned long address) +{ + unsigned long addrmax = P4SEG; + pgd_t *dir; + pmd_t *pmd; + pte_t *pte; + pte_t entry; + +#ifdef CONFIG_SH_KGDB + if (kgdb_nofault && kgdb_bus_err_hook) + kgdb_bus_err_hook(); +#endif + +#ifdef CONFIG_SH_STORE_QUEUES + addrmax = P4SEG_STORE_QUE + 0x04000000; +#endif + + if (address >= P3SEG && address < addrmax) + dir = pgd_offset_k(address); + else if (address >= TASK_SIZE) + return 1; + else if (!current->mm) + return 1; + else + dir = pgd_offset(current->mm, address); + + pmd = pmd_offset(dir, address); + if (pmd_none(*pmd)) + return 1; + if (pmd_bad(*pmd)) { + pmd_ERROR(*pmd); + pmd_clear(pmd); + return 1; + } + pte = pte_offset_kernel(pmd, address); + entry = *pte; + if (pte_none(entry) || pte_not_present(entry) + || (writeaccess && !pte_write(entry))) + return 1; + + if (writeaccess) + entry = pte_mkdirty(entry); + entry = pte_mkyoung(entry); + +#ifdef CONFIG_CPU_SH4 + /* + * ITLB is not affected by "ldtlb" instruction. + * So, we need to flush the entry by ourselves. + */ + + { + unsigned long flags; + local_irq_save(flags); + __flush_tlb_page(get_asid(), address&PAGE_MASK); + local_irq_restore(flags); + } +#endif + + set_pte(pte, entry); + update_mmu_cache(NULL, address, entry); + + return 0; +} + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) +{ + if (vma->vm_mm && vma->vm_mm->context != NO_CONTEXT) { + unsigned long flags; + unsigned long asid; + unsigned long saved_asid = MMU_NO_ASID; + + asid = vma->vm_mm->context & MMU_CONTEXT_ASID_MASK; + page &= PAGE_MASK; + + local_irq_save(flags); + if (vma->vm_mm != current->mm) { + saved_asid = get_asid(); + set_asid(asid); + } + __flush_tlb_page(asid, page); + if (saved_asid != MMU_NO_ASID) + set_asid(saved_asid); + local_irq_restore(flags); + } +} + +void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + struct mm_struct *mm = vma->vm_mm; + + if (mm->context != NO_CONTEXT) { + unsigned long flags; + int size; + + local_irq_save(flags); + size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; + if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */ + mm->context = NO_CONTEXT; + if (mm == current->mm) + activate_context(mm); + } else { + unsigned long asid = mm->context&MMU_CONTEXT_ASID_MASK; + unsigned long saved_asid = MMU_NO_ASID; + + start &= PAGE_MASK; + end += (PAGE_SIZE - 1); + end &= PAGE_MASK; + if (mm != current->mm) { + saved_asid = get_asid(); + set_asid(asid); + } + while (start < end) { + __flush_tlb_page(asid, start); + start += PAGE_SIZE; + } + if (saved_asid != MMU_NO_ASID) + set_asid(saved_asid); + } + local_irq_restore(flags); + } +} + +void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + unsigned long flags; + int size; + + local_irq_save(flags); + size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; + if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */ + flush_tlb_all(); + } else { + unsigned long asid = init_mm.context&MMU_CONTEXT_ASID_MASK; + unsigned long saved_asid = get_asid(); + + start &= PAGE_MASK; + end += (PAGE_SIZE - 1); + end &= PAGE_MASK; + set_asid(asid); + while (start < end) { + __flush_tlb_page(asid, start); + start += PAGE_SIZE; + } + set_asid(saved_asid); + } + local_irq_restore(flags); +} + +void flush_tlb_mm(struct mm_struct *mm) +{ + /* Invalidate all TLB of this process. */ + /* Instead of invalidating each TLB, we get new MMU context. */ + if (mm->context != NO_CONTEXT) { + unsigned long flags; + + local_irq_save(flags); + mm->context = NO_CONTEXT; + if (mm == current->mm) + activate_context(mm); + local_irq_restore(flags); + } +} + +void flush_tlb_all(void) +{ + unsigned long flags, status; + + /* + * Flush all the TLB. + * + * Write to the MMU control register's bit: + * TF-bit for SH-3, TI-bit for SH-4. + * It's same position, bit #2. + */ + local_irq_save(flags); + status = ctrl_inl(MMUCR); + status |= 0x04; + ctrl_outl(status, MMUCR); + local_irq_restore(flags); +} diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c new file mode 100644 index 00000000000..1f897bab231 --- /dev/null +++ b/arch/sh/mm/hugetlbpage.c @@ -0,0 +1,264 @@ +/* + * arch/sh/mm/hugetlbpage.c + * + * SuperH HugeTLB page support. + * + * Cloned from sparc64 by Paul Mundt. + * + * Copyright (C) 2002, 2003 David S. Miller (davem@redhat.com) + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/hugetlb.h> +#include <linux/pagemap.h> +#include <linux/smp_lock.h> +#include <linux/slab.h> +#include <linux/sysctl.h> + +#include <asm/mman.h> +#include <asm/pgalloc.h> +#include <asm/tlb.h> +#include <asm/tlbflush.h> +#include <asm/cacheflush.h> + +static pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) +{ + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte = NULL; + + pgd = pgd_offset(mm, addr); + if (pgd) { + pmd = pmd_alloc(mm, pgd, addr); + if (pmd) + pte = pte_alloc_map(mm, pmd, addr); + } + return pte; +} + +static pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) +{ + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte = NULL; + + pgd = pgd_offset(mm, addr); + if (pgd) { + pmd = pmd_offset(pgd, addr); + if (pmd) + pte = pte_offset_map(pmd, addr); + } + return pte; +} + +#define mk_pte_huge(entry) do { pte_val(entry) |= _PAGE_SZHUGE; } while (0) + +static void set_huge_pte(struct mm_struct *mm, struct vm_area_struct *vma, + struct page *page, pte_t * page_table, int write_access) +{ + unsigned long i; + pte_t entry; + + add_mm_counter(mm, rss, HPAGE_SIZE / PAGE_SIZE); + + if (write_access) + entry = pte_mkwrite(pte_mkdirty(mk_pte(page, + vma->vm_page_prot))); + else + entry = pte_wrprotect(mk_pte(page, vma->vm_page_prot)); + entry = pte_mkyoung(entry); + mk_pte_huge(entry); + + for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { + set_pte(page_table, entry); + page_table++; + + pte_val(entry) += PAGE_SIZE; + } +} + +/* + * This function checks for proper alignment of input addr and len parameters. + */ +int is_aligned_hugepage_range(unsigned long addr, unsigned long len) +{ + if (len & ~HPAGE_MASK) + return -EINVAL; + if (addr & ~HPAGE_MASK) + return -EINVAL; + return 0; +} + +int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, + struct vm_area_struct *vma) +{ + pte_t *src_pte, *dst_pte, entry; + struct page *ptepage; + unsigned long addr = vma->vm_start; + unsigned long end = vma->vm_end; + int i; + + while (addr < end) { + dst_pte = huge_pte_alloc(dst, addr); + if (!dst_pte) + goto nomem; + src_pte = huge_pte_offset(src, addr); + BUG_ON(!src_pte || pte_none(*src_pte)); + entry = *src_pte; + ptepage = pte_page(entry); + get_page(ptepage); + for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { + set_pte(dst_pte, entry); + pte_val(entry) += PAGE_SIZE; + dst_pte++; + } + add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE); + addr += HPAGE_SIZE; + } + return 0; + +nomem: + return -ENOMEM; +} + +int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma, + struct page **pages, struct vm_area_struct **vmas, + unsigned long *position, int *length, int i) +{ + unsigned long vaddr = *position; + int remainder = *length; + + WARN_ON(!is_vm_hugetlb_page(vma)); + + while (vaddr < vma->vm_end && remainder) { + if (pages) { + pte_t *pte; + struct page *page; + + pte = huge_pte_offset(mm, vaddr); + + /* hugetlb should be locked, and hence, prefaulted */ + BUG_ON(!pte || pte_none(*pte)); + + page = pte_page(*pte); + + WARN_ON(!PageCompound(page)); + + get_page(page); + pages[i] = page; + } + + if (vmas) + vmas[i] = vma; + + vaddr += PAGE_SIZE; + --remainder; + ++i; + } + + *length = remainder; + *position = vaddr; + + return i; +} + +struct page *follow_huge_addr(struct mm_struct *mm, + unsigned long address, int write) +{ + return ERR_PTR(-EINVAL); +} + +int pmd_huge(pmd_t pmd) +{ + return 0; +} + +struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address, + pmd_t *pmd, int write) +{ + return NULL; +} + +void unmap_hugepage_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + struct mm_struct *mm = vma->vm_mm; + unsigned long address; + pte_t *pte; + struct page *page; + int i; + + BUG_ON(start & (HPAGE_SIZE - 1)); + BUG_ON(end & (HPAGE_SIZE - 1)); + + for (address = start; address < end; address += HPAGE_SIZE) { + pte = huge_pte_offset(mm, address); + BUG_ON(!pte); + if (pte_none(*pte)) + continue; + page = pte_page(*pte); + put_page(page); + for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { + pte_clear(mm, address+(i*PAGE_SIZE), pte); + pte++; + } + } + add_mm_counter(mm, rss, -((end - start) >> PAGE_SHIFT)); + flush_tlb_range(vma, start, end); +} + +int hugetlb_prefault(struct address_space *mapping, struct vm_area_struct *vma) +{ + struct mm_struct *mm = current->mm; + unsigned long addr; + int ret = 0; + + BUG_ON(vma->vm_start & ~HPAGE_MASK); + BUG_ON(vma->vm_end & ~HPAGE_MASK); + + spin_lock(&mm->page_table_lock); + for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) { + unsigned long idx; + pte_t *pte = huge_pte_alloc(mm, addr); + struct page *page; + + if (!pte) { + ret = -ENOMEM; + goto out; + } + if (!pte_none(*pte)) + continue; + + idx = ((addr - vma->vm_start) >> HPAGE_SHIFT) + + (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT)); + page = find_get_page(mapping, idx); + if (!page) { + /* charge the fs quota first */ + if (hugetlb_get_quota(mapping)) { + ret = -ENOMEM; + goto out; + } + page = alloc_huge_page(); + if (!page) { + hugetlb_put_quota(mapping); + ret = -ENOMEM; + goto out; + } + ret = add_to_page_cache(page, mapping, idx, GFP_ATOMIC); + if (! ret) { + unlock_page(page); + } else { + hugetlb_put_quota(mapping); + free_huge_page(page); + goto out; + } + } + set_huge_pte(mm, vma, page, pte, vma->vm_flags & VM_WRITE); + } +out: + spin_unlock(&mm->page_table_lock); + return ret; +} diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c new file mode 100644 index 00000000000..4e9c854845a --- /dev/null +++ b/arch/sh/mm/init.c @@ -0,0 +1,313 @@ +/* $Id: init.c,v 1.19 2004/02/21 04:42:16 kkojima Exp $ + * + * linux/arch/sh/mm/init.c + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2002, 2004 Paul Mundt + * + * Based on linux/arch/i386/mm/init.c: + * Copyright (C) 1995 Linus Torvalds + */ + +#include <linux/config.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/swap.h> +#include <linux/smp.h> +#include <linux/init.h> +#include <linux/highmem.h> +#include <linux/bootmem.h> +#include <linux/pagemap.h> + +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> +#include <asm/io.h> +#include <asm/tlb.h> +#include <asm/cacheflush.h> +#include <asm/cache.h> + +DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); +pgd_t swapper_pg_dir[PTRS_PER_PGD]; + +/* + * Cache of MMU context last used. + */ +unsigned long mmu_context_cache = NO_CONTEXT; + +#ifdef CONFIG_MMU +/* It'd be good if these lines were in the standard header file. */ +#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT) +#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn) +#endif + +#ifdef CONFIG_DISCONTIGMEM +pg_data_t discontig_page_data[MAX_NUMNODES]; +bootmem_data_t discontig_node_bdata[MAX_NUMNODES]; +#endif + +void (*copy_page)(void *from, void *to); +void (*clear_page)(void *to); + +void show_mem(void) +{ + int i, total = 0, reserved = 0; + int shared = 0, cached = 0; + + printk("Mem-info:\n"); + show_free_areas(); + printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); + i = max_mapnr; + while (i-- > 0) { + total++; + if (PageReserved(mem_map+i)) + reserved++; + else if (PageSwapCache(mem_map+i)) + cached++; + else if (page_count(mem_map+i)) + shared += page_count(mem_map+i) - 1; + } + printk("%d pages of RAM\n",total); + printk("%d reserved pages\n",reserved); + printk("%d pages shared\n",shared); + printk("%d pages swap cached\n",cached); +} + +static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) +{ + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte; + + pgd = swapper_pg_dir + pgd_index(addr); + if (pgd_none(*pgd)) { + pgd_ERROR(*pgd); + return; + } + + pmd = pmd_offset(pgd, addr); + if (pmd_none(*pmd)) { + pte = (pte_t *)get_zeroed_page(GFP_ATOMIC); + set_pmd(pmd, __pmd(__pa(pte) | _KERNPG_TABLE | _PAGE_USER)); + if (pte != pte_offset_kernel(pmd, 0)) { + pmd_ERROR(*pmd); + return; + } + } + + pte = pte_offset_kernel(pmd, addr); + if (!pte_none(*pte)) { + pte_ERROR(*pte); + return; + } + + set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot)); + + __flush_tlb_page(get_asid(), addr); +} + +/* + * As a performance optimization, other platforms preserve the fixmap mapping + * across a context switch, we don't presently do this, but this could be done + * in a similar fashion as to the wired TLB interface that sh64 uses (by way + * of the memorry mapped UTLB configuration) -- this unfortunately forces us to + * give up a TLB entry for each mapping we want to preserve. While this may be + * viable for a small number of fixmaps, it's not particularly useful for + * everything and needs to be carefully evaluated. (ie, we may want this for + * the vsyscall page). + * + * XXX: Perhaps add a _PAGE_WIRED flag or something similar that we can pass + * in at __set_fixmap() time to determine the appropriate behavior to follow. + * + * -- PFM. + */ +void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot) +{ + unsigned long address = __fix_to_virt(idx); + + if (idx >= __end_of_fixed_addresses) { + BUG(); + return; + } + + set_pte_phys(address, phys, prot); +} + +/* References to section boundaries */ + +extern char _text, _etext, _edata, __bss_start, _end; +extern char __init_begin, __init_end; + +/* + * paging_init() sets up the page tables + * + * This routines also unmaps the page at virtual kernel address 0, so + * that we can trap those pesky NULL-reference errors in the kernel. + */ +void __init paging_init(void) +{ + unsigned long zones_size[MAX_NR_ZONES] = { 0, }; + + /* + * Setup some defaults for the zone sizes.. these should be safe + * regardless of distcontiguous memory or MMU settings. + */ + zones_size[ZONE_DMA] = 0 >> PAGE_SHIFT; + zones_size[ZONE_NORMAL] = __MEMORY_SIZE >> PAGE_SHIFT; +#ifdef CONFIG_HIGHMEM + zones_size[ZONE_HIGHMEM] = 0 >> PAGE_SHIFT; +#endif + +#ifdef CONFIG_MMU + /* + * If we have an MMU, and want to be using it .. we need to adjust + * the zone sizes accordingly, in addition to turning it on. + */ + { + unsigned long max_dma, low, start_pfn; + pgd_t *pg_dir; + int i; + + /* We don't need kernel mapping as hardware support that. */ + pg_dir = swapper_pg_dir; + + for (i = 0; i < PTRS_PER_PGD; i++) + pgd_val(pg_dir[i]) = 0; + + /* Turn on the MMU */ + enable_mmu(); + + /* Fixup the zone sizes */ + start_pfn = START_PFN; + max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; + low = MAX_LOW_PFN; + + if (low < max_dma) { + zones_size[ZONE_DMA] = low - start_pfn; + zones_size[ZONE_NORMAL] = 0; + } else { + zones_size[ZONE_DMA] = max_dma - start_pfn; + zones_size[ZONE_NORMAL] = low - max_dma; + } + } + +#elif defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4) + /* + * If we don't have CONFIG_MMU set and the processor in question + * still has an MMU, care needs to be taken to make sure it doesn't + * stay on.. Since the boot loader could have potentially already + * turned it on, and we clearly don't want it, we simply turn it off. + * + * We don't need to do anything special for the zone sizes, since the + * default values that were already configured up above should be + * satisfactory. + */ + disable_mmu(); +#endif + NODE_DATA(0)->node_mem_map = NULL; + free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0); + +#ifdef CONFIG_DISCONTIGMEM + /* + * And for discontig, do some more fixups on the zone sizes.. + */ + zones_size[ZONE_DMA] = __MEMORY_SIZE_2ND >> PAGE_SHIFT; + zones_size[ZONE_NORMAL] = 0; + free_area_init_node(1, NODE_DATA(1), zones_size, __MEMORY_START_2ND >> PAGE_SHIFT, 0); +#endif +} + +void __init mem_init(void) +{ + extern unsigned long empty_zero_page[1024]; + int codesize, reservedpages, datasize, initsize; + int tmp; + extern unsigned long memory_start; + +#ifdef CONFIG_MMU + high_memory = (void *)__va(MAX_LOW_PFN * PAGE_SIZE); +#else + extern unsigned long memory_end; + + high_memory = (void *)(memory_end & PAGE_MASK); +#endif + + max_mapnr = num_physpages = MAP_NR(high_memory) - MAP_NR(memory_start); + + /* clear the zero-page */ + memset(empty_zero_page, 0, PAGE_SIZE); + __flush_wback_region(empty_zero_page, PAGE_SIZE); + + /* + * Setup wrappers for copy/clear_page(), these will get overridden + * later in the boot process if a better method is available. + */ + copy_page = copy_page_slow; + clear_page = clear_page_slow; + + /* this will put all low memory onto the freelists */ + totalram_pages += free_all_bootmem_node(NODE_DATA(0)); +#ifdef CONFIG_DISCONTIGMEM + totalram_pages += free_all_bootmem_node(NODE_DATA(1)); +#endif + reservedpages = 0; + for (tmp = 0; tmp < num_physpages; tmp++) + /* + * Only count reserved RAM pages + */ + if (PageReserved(mem_map+tmp)) + reservedpages++; + + codesize = (unsigned long) &_etext - (unsigned long) &_text; + datasize = (unsigned long) &_edata - (unsigned long) &_etext; + initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; + + printk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n", + (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), + max_mapnr << (PAGE_SHIFT-10), + codesize >> 10, + reservedpages << (PAGE_SHIFT-10), + datasize >> 10, + initsize >> 10); + + p3_cache_init(); +} + +void free_initmem(void) +{ + unsigned long addr; + + addr = (unsigned long)(&__init_begin); + for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { + ClearPageReserved(virt_to_page(addr)); + set_page_count(virt_to_page(addr), 1); + free_page(addr); + totalram_pages++; + } + printk ("Freeing unused kernel memory: %dk freed\n", (&__init_end - &__init_begin) >> 10); +} + +#ifdef CONFIG_BLK_DEV_INITRD +void free_initrd_mem(unsigned long start, unsigned long end) +{ + unsigned long p; + for (p = start; p < end; p += PAGE_SIZE) { + ClearPageReserved(virt_to_page(p)); + set_page_count(virt_to_page(p), 1); + free_page(p); + totalram_pages++; + } + printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); +} +#endif + diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c new file mode 100644 index 00000000000..9f490c2742f --- /dev/null +++ b/arch/sh/mm/ioremap.c @@ -0,0 +1,163 @@ +/* + * arch/sh/mm/ioremap.c + * + * Re-map IO memory to kernel address space so that we can access it. + * This is needed for high PCI addresses that aren't mapped in the + * 640k-1MB IO memory area on PC's + * + * (C) Copyright 1995 1996 Linus Torvalds + */ + +#include <linux/vmalloc.h> +#include <linux/mm.h> +#include <asm/io.h> +#include <asm/page.h> +#include <asm/pgalloc.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> + +static inline void remap_area_pte(pte_t * pte, unsigned long address, + unsigned long size, unsigned long phys_addr, unsigned long flags) +{ + unsigned long end; + unsigned long pfn; + pgprot_t pgprot = __pgprot(_PAGE_PRESENT | _PAGE_RW | + _PAGE_DIRTY | _PAGE_ACCESSED | + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | flags); + + address &= ~PMD_MASK; + end = address + size; + if (end > PMD_SIZE) + end = PMD_SIZE; + if (address >= end) + BUG(); + pfn = phys_addr >> PAGE_SHIFT; + do { + if (!pte_none(*pte)) { + printk("remap_area_pte: page already exists\n"); + BUG(); + } + set_pte(pte, pfn_pte(pfn, pgprot)); + address += PAGE_SIZE; + pfn++; + pte++; + } while (address && (address < end)); +} + +static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, + unsigned long size, unsigned long phys_addr, unsigned long flags) +{ + unsigned long end; + + address &= ~PGDIR_MASK; + end = address + size; + if (end > PGDIR_SIZE) + end = PGDIR_SIZE; + phys_addr -= address; + if (address >= end) + BUG(); + do { + pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address); + if (!pte) + return -ENOMEM; + remap_area_pte(pte, address, end - address, address + phys_addr, flags); + address = (address + PMD_SIZE) & PMD_MASK; + pmd++; + } while (address && (address < end)); + return 0; +} + +int remap_area_pages(unsigned long address, unsigned long phys_addr, + unsigned long size, unsigned long flags) +{ + int error; + pgd_t * dir; + unsigned long end = address + size; + + phys_addr -= address; + dir = pgd_offset_k(address); + flush_cache_all(); + if (address >= end) + BUG(); + spin_lock(&init_mm.page_table_lock); + do { + pmd_t *pmd; + pmd = pmd_alloc(&init_mm, dir, address); + error = -ENOMEM; + if (!pmd) + break; + if (remap_area_pmd(pmd, address, end - address, + phys_addr + address, flags)) + break; + error = 0; + address = (address + PGDIR_SIZE) & PGDIR_MASK; + dir++; + } while (address && (address < end)); + spin_unlock(&init_mm.page_table_lock); + flush_tlb_all(); + return error; +} + +/* + * Generic mapping function (not visible outside): + */ + +/* + * Remap an arbitrary physical address space into the kernel virtual + * address space. Needed when the kernel wants to access high addresses + * directly. + * + * NOTE! We need to allow non-page-aligned mappings too: we will obviously + * have to convert them into an offset in a page-aligned mapping, but the + * caller shouldn't need to know that small detail. + */ +void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags) +{ + void * addr; + struct vm_struct * area; + unsigned long offset, last_addr; + + /* Don't allow wraparound or zero size */ + last_addr = phys_addr + size - 1; + if (!size || last_addr < phys_addr) + return NULL; + + /* + * Don't remap the low PCI/ISA area, it's always mapped.. + */ + if (phys_addr >= 0xA0000 && last_addr < 0x100000) + return phys_to_virt(phys_addr); + + /* + * Don't allow anybody to remap normal RAM that we're using.. + */ + if (phys_addr < virt_to_phys(high_memory)) + return NULL; + + /* + * Mappings have to be page-aligned + */ + offset = phys_addr & ~PAGE_MASK; + phys_addr &= PAGE_MASK; + size = PAGE_ALIGN(last_addr+1) - phys_addr; + + /* + * Ok, go for it.. + */ + area = get_vm_area(size, VM_IOREMAP); + if (!area) + return NULL; + area->phys_addr = phys_addr; + addr = area->addr; + if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) { + vunmap(addr); + return NULL; + } + return (void *) (offset + (char *)addr); +} + +void p3_iounmap(void *addr) +{ + if (addr > high_memory) + vfree((void *)(PAGE_MASK & (unsigned long)addr)); +} diff --git a/arch/sh/mm/pg-dma.c b/arch/sh/mm/pg-dma.c new file mode 100644 index 00000000000..1406d2e348c --- /dev/null +++ b/arch/sh/mm/pg-dma.c @@ -0,0 +1,97 @@ +/* + * arch/sh/mm/pg-dma.c + * + * Fast clear_page()/copy_page() implementation using the SH DMAC + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <asm/semaphore.h> +#include <asm/mmu_context.h> +#include <asm/addrspace.h> +#include <asm/atomic.h> +#include <asm/page.h> +#include <asm/dma.h> +#include <asm/io.h> + +/* Channel to use for page ops, must be dual-address mode capable. */ +static int dma_channel = CONFIG_DMA_PAGE_OPS_CHANNEL; + +static void copy_page_dma(void *to, void *from) +{ + /* + * This doesn't seem to get triggered until further along in the + * boot process, at which point the DMAC is already initialized. + * Fix this in the same fashion as clear_page_dma() in the event + * that this crashes due to the DMAC not being initialized. + */ + + flush_icache_range((unsigned long)from, PAGE_SIZE); + dma_write_page(dma_channel, (unsigned long)from, (unsigned long)to); + dma_wait_for_completion(dma_channel); +} + +static void clear_page_dma(void *to) +{ + extern unsigned long empty_zero_page[1024]; + + /* + * We get invoked quite early on, if the DMAC hasn't been initialized + * yet, fall back on the slow manual implementation. + */ + if (dma_info[dma_channel].chan != dma_channel) { + clear_page_slow(to); + return; + } + + dma_write_page(dma_channel, (unsigned long)empty_zero_page, + (unsigned long)to); + + /* + * FIXME: Something is a bit racy here, if we poll the counter right + * away, we seem to lock. flushing the page from the dcache doesn't + * seem to make a difference one way or the other, though either a full + * icache or dcache flush does. + * + * The location of this is important as well, and must happen prior to + * the completion loop but after the transfer was initiated. + * + * Oddly enough, this doesn't appear to be an issue for copy_page().. + */ + flush_icache_range((unsigned long)to, PAGE_SIZE); + + dma_wait_for_completion(dma_channel); +} + +static int __init pg_dma_init(void) +{ + int ret; + + ret = request_dma(dma_channel, "page ops"); + if (ret != 0) + return ret; + + copy_page = copy_page_dma; + clear_page = clear_page_dma; + + return ret; +} + +static void __exit pg_dma_exit(void) +{ + free_dma(dma_channel); +} + +module_init(pg_dma_init); +module_exit(pg_dma_exit); + +MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); +MODULE_DESCRIPTION("Optimized page copy/clear routines using a dual-address mode capable DMAC channel"); +MODULE_LICENSE("GPL"); + diff --git a/arch/sh/mm/pg-nommu.c b/arch/sh/mm/pg-nommu.c new file mode 100644 index 00000000000..8f9165a4e33 --- /dev/null +++ b/arch/sh/mm/pg-nommu.c @@ -0,0 +1,36 @@ +/* + * arch/sh/mm/pg-nommu.c + * + * clear_page()/copy_page() implementation for MMUless SH. + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <asm/page.h> + +static void copy_page_nommu(void *to, void *from) +{ + memcpy(to, from, PAGE_SIZE); +} + +static void clear_page_nommu(void *to) +{ + memset(to, 0, PAGE_SIZE); +} + +static int __init pg_nommu_init(void) +{ + copy_page = copy_page_nommu; + clear_page = clear_page_nommu; + + return 0; +} + +subsys_initcall(pg_nommu_init); + diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c new file mode 100644 index 00000000000..e5907c7330e --- /dev/null +++ b/arch/sh/mm/pg-sh4.c @@ -0,0 +1,122 @@ +/* + * arch/sh/mm/pg-sh4.c + * + * Copyright (C) 1999, 2000, 2002 Niibe Yutaka + * Copyright (C) 2002 Paul Mundt + * + * Released under the terms of the GNU GPL v2.0. + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/threads.h> +#include <asm/addrspace.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> +#include <asm/cacheflush.h> + +extern struct semaphore p3map_sem[]; + +/* + * clear_user_page + * @to: P1 address + * @address: U0 address to be mapped + * @page: page (virt_to_page(to)) + */ +void clear_user_page(void *to, unsigned long address, struct page *page) +{ + __set_bit(PG_mapped, &page->flags); + if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) + clear_page(to); + else { + pgprot_t pgprot = __pgprot(_PAGE_PRESENT | + _PAGE_RW | _PAGE_CACHABLE | + _PAGE_DIRTY | _PAGE_ACCESSED | + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD); + unsigned long phys_addr = PHYSADDR(to); + unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS); + pgd_t *dir = pgd_offset_k(p3_addr); + pmd_t *pmd = pmd_offset(dir, p3_addr); + pte_t *pte = pte_offset_kernel(pmd, p3_addr); + pte_t entry; + unsigned long flags; + + entry = pfn_pte(phys_addr >> PAGE_SHIFT, pgprot); + down(&p3map_sem[(address & CACHE_ALIAS)>>12]); + set_pte(pte, entry); + local_irq_save(flags); + __flush_tlb_page(get_asid(), p3_addr); + local_irq_restore(flags); + update_mmu_cache(NULL, p3_addr, entry); + __clear_user_page((void *)p3_addr, to); + pte_clear(&init_mm, p3_addr, pte); + up(&p3map_sem[(address & CACHE_ALIAS)>>12]); + } +} + +/* + * copy_user_page + * @to: P1 address + * @from: P1 address + * @address: U0 address to be mapped + * @page: page (virt_to_page(to)) + */ +void copy_user_page(void *to, void *from, unsigned long address, + struct page *page) +{ + __set_bit(PG_mapped, &page->flags); + if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) + copy_page(to, from); + else { + pgprot_t pgprot = __pgprot(_PAGE_PRESENT | + _PAGE_RW | _PAGE_CACHABLE | + _PAGE_DIRTY | _PAGE_ACCESSED | + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD); + unsigned long phys_addr = PHYSADDR(to); + unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS); + pgd_t *dir = pgd_offset_k(p3_addr); + pmd_t *pmd = pmd_offset(dir, p3_addr); + pte_t *pte = pte_offset_kernel(pmd, p3_addr); + pte_t entry; + unsigned long flags; + + entry = pfn_pte(phys_addr >> PAGE_SHIFT, pgprot); + down(&p3map_sem[(address & CACHE_ALIAS)>>12]); + set_pte(pte, entry); + local_irq_save(flags); + __flush_tlb_page(get_asid(), p3_addr); + local_irq_restore(flags); + update_mmu_cache(NULL, p3_addr, entry); + __copy_user_page((void *)p3_addr, from, to); + pte_clear(&init_mm, p3_addr, pte); + up(&p3map_sem[(address & CACHE_ALIAS)>>12]); + } +} + +/* + * For SH-4, we have our own implementation for ptep_get_and_clear + */ +inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + pte_t pte = *ptep; + + pte_clear(mm, addr, ptep); + if (!pte_not_present(pte)) { + unsigned long pfn = pte_pfn(pte); + if (pfn_valid(pfn)) { + struct page *page = pfn_to_page(pfn); + struct address_space *mapping = page_mapping(page); + if (!mapping || !mapping_writably_mapped(mapping)) + __clear_bit(PG_mapped, &page->flags); + } + } + return pte; +} + diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c new file mode 100644 index 00000000000..ff9ece986cb --- /dev/null +++ b/arch/sh/mm/pg-sh7705.c @@ -0,0 +1,137 @@ +/* + * arch/sh/mm/pg-sh7705.c + * + * Copyright (C) 1999, 2000 Niibe Yutaka + * Copyright (C) 2004 Alex Song + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#include <linux/init.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/threads.h> +#include <asm/addrspace.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> +#include <asm/cacheflush.h> + +static inline void __flush_purge_virtual_region(void *p1, void *virt, int size) +{ + unsigned long v; + unsigned long begin, end; + unsigned long p1_begin; + + + begin = L1_CACHE_ALIGN((unsigned long)virt); + end = L1_CACHE_ALIGN((unsigned long)virt + size); + + p1_begin = (unsigned long)p1 & ~(L1_CACHE_BYTES - 1); + + /* do this the slow way as we may not have TLB entries + * for virt yet. */ + for (v = begin; v < end; v += L1_CACHE_BYTES) { + unsigned long p; + unsigned long ways, addr; + + p = __pa(p1_begin); + + ways = cpu_data->dcache.ways; + addr = CACHE_OC_ADDRESS_ARRAY; + + do { + unsigned long data; + + addr |= (v & cpu_data->dcache.entry_mask); + + data = ctrl_inl(addr); + if ((data & CACHE_PHYSADDR_MASK) == + (p & CACHE_PHYSADDR_MASK)) { + data &= ~(SH_CACHE_UPDATED|SH_CACHE_VALID); + ctrl_outl(data, addr); + } + + addr += cpu_data->dcache.way_incr; + } while (--ways); + + p1_begin += L1_CACHE_BYTES; + } +} + +/* + * clear_user_page + * @to: P1 address + * @address: U0 address to be mapped + */ +void clear_user_page(void *to, unsigned long address, struct page *pg) +{ + struct page *page = virt_to_page(to); + + __set_bit(PG_mapped, &page->flags); + if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) { + clear_page(to); + __flush_wback_region(to, PAGE_SIZE); + } else { + __flush_purge_virtual_region(to, + (void *)(address & 0xfffff000), + PAGE_SIZE); + clear_page(to); + __flush_wback_region(to, PAGE_SIZE); + } +} + +/* + * copy_user_page + * @to: P1 address + * @from: P1 address + * @address: U0 address to be mapped + */ +void copy_user_page(void *to, void *from, unsigned long address, struct page *pg) +{ + struct page *page = virt_to_page(to); + + + __set_bit(PG_mapped, &page->flags); + if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) { + copy_page(to, from); + __flush_wback_region(to, PAGE_SIZE); + } else { + __flush_purge_virtual_region(to, + (void *)(address & 0xfffff000), + PAGE_SIZE); + copy_page(to, from); + __flush_wback_region(to, PAGE_SIZE); + } +} + +/* + * For SH7705, we have our own implementation for ptep_get_and_clear + * Copied from pg-sh4.c + */ +inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + pte_t pte = *ptep; + + pte_clear(mm, addr, ptep); + if (!pte_not_present(pte)) { + unsigned long pfn = pte_pfn(pte); + if (pfn_valid(pfn)) { + struct page *page = pfn_to_page(pfn); + struct address_space *mapping = page_mapping(page); + if (!mapping || !mapping_writably_mapped(mapping)) + __clear_bit(PG_mapped, &page->flags); + } + } + + return pte; +} + diff --git a/arch/sh/mm/tlb-nommu.c b/arch/sh/mm/tlb-nommu.c new file mode 100644 index 00000000000..e55cfea0109 --- /dev/null +++ b/arch/sh/mm/tlb-nommu.c @@ -0,0 +1,58 @@ +/* + * arch/sh/mm/tlb-nommu.c + * + * TLB Operations for MMUless SH. + * + * Copyright (C) 2002 Paul Mundt + * + * Released under the terms of the GNU GPL v2.0. + */ +#include <linux/kernel.h> +#include <linux/mm.h> + +/* + * Nothing too terribly exciting here .. + */ + +void flush_tlb(void) +{ + BUG(); +} + +void flush_tlb_all(void) +{ + BUG(); +} + +void flush_tlb_mm(struct mm_struct *mm) +{ + BUG(); +} + +void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + BUG(); +} + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) +{ + BUG(); +} + +void __flush_tlb_page(unsigned long asid, unsigned long page) +{ + BUG(); +} + +void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + BUG(); +} + +void update_mmu_cache(struct vm_area_struct * vma, + unsigned long address, pte_t pte) +{ + BUG(); +} + diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c new file mode 100644 index 00000000000..7a0d5c10bf2 --- /dev/null +++ b/arch/sh/mm/tlb-sh3.c @@ -0,0 +1,92 @@ +/* + * arch/sh/mm/tlb-sh3.c + * + * SH-3 specific TLB operations + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2002 Paul Mundt + * + * Released under the terms of the GNU GPL v2.0. + */ +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/interrupt.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> +#include <asm/cacheflush.h> + +void update_mmu_cache(struct vm_area_struct * vma, + unsigned long address, pte_t pte) +{ + unsigned long flags; + unsigned long pteval; + unsigned long vpn; + + /* Ptrace may call this routine. */ + if (vma && current->active_mm != vma->vm_mm) + return; + +#if defined(CONFIG_SH7705_CACHE_32KB) + struct page *page; + page = pte_page(pte); + if (VALID_PAGE(page) && !test_bit(PG_mapped, &page->flags)) { + unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; + __flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE); + __set_bit(PG_mapped, &page->flags); + } +#endif + + local_irq_save(flags); + + /* Set PTEH register */ + vpn = (address & MMU_VPN_MASK) | get_asid(); + ctrl_outl(vpn, MMU_PTEH); + + pteval = pte_val(pte); + + /* Set PTEL register */ + pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ + /* conveniently, we want all the software flags to be 0 anyway */ + ctrl_outl(pteval, MMU_PTEL); + + /* Load the TLB */ + asm volatile("ldtlb": /* no output */ : /* no input */ : "memory"); + local_irq_restore(flags); +} + +void __flush_tlb_page(unsigned long asid, unsigned long page) +{ + unsigned long addr, data; + int i, ways = MMU_NTLB_WAYS; + + /* + * NOTE: PTEH.ASID should be set to this MM + * _AND_ we need to write ASID to the array. + * + * It would be simple if we didn't need to set PTEH.ASID... + */ + addr = MMU_TLB_ADDRESS_ARRAY | (page & 0x1F000); + data = (page & 0xfffe0000) | asid; /* VALID bit is off */ + + if ((cpu_data->flags & CPU_HAS_MMU_PAGE_ASSOC)) { + addr |= MMU_PAGE_ASSOC_BIT; + ways = 1; /* we already know the way .. */ + } + + for (i = 0; i < ways; i++) + ctrl_outl(data, addr + (i << 8)); +} + diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c new file mode 100644 index 00000000000..115b1b6be40 --- /dev/null +++ b/arch/sh/mm/tlb-sh4.c @@ -0,0 +1,96 @@ +/* + * arch/sh/mm/tlb-sh4.c + * + * SH-4 specific TLB operations + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2002 Paul Mundt + * + * Released under the terms of the GNU GPL v2.0. + */ +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/interrupt.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> +#include <asm/cacheflush.h> + +void update_mmu_cache(struct vm_area_struct * vma, + unsigned long address, pte_t pte) +{ + unsigned long flags; + unsigned long pteval; + unsigned long vpn; + struct page *page; + unsigned long pfn; + unsigned long ptea; + + /* Ptrace may call this routine. */ + if (vma && current->active_mm != vma->vm_mm) + return; + + pfn = pte_pfn(pte); + if (pfn_valid(pfn)) { + page = pfn_to_page(pfn); + if (!test_bit(PG_mapped, &page->flags)) { + unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; + __flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE); + __set_bit(PG_mapped, &page->flags); + } + } + + local_irq_save(flags); + + /* Set PTEH register */ + vpn = (address & MMU_VPN_MASK) | get_asid(); + ctrl_outl(vpn, MMU_PTEH); + + pteval = pte_val(pte); + /* Set PTEA register */ + /* TODO: make this look less hacky */ + ptea = ((pteval >> 28) & 0xe) | (pteval & 0x1); + ctrl_outl(ptea, MMU_PTEA); + + /* Set PTEL register */ + pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ +#ifdef CONFIG_SH_WRITETHROUGH + pteval |= _PAGE_WT; +#endif + /* conveniently, we want all the software flags to be 0 anyway */ + ctrl_outl(pteval, MMU_PTEL); + + /* Load the TLB */ + asm volatile("ldtlb": /* no output */ : /* no input */ : "memory"); + local_irq_restore(flags); +} + +void __flush_tlb_page(unsigned long asid, unsigned long page) +{ + unsigned long addr, data; + + /* + * NOTE: PTEH.ASID should be set to this MM + * _AND_ we need to write ASID to the array. + * + * It would be simple if we didn't need to set PTEH.ASID... + */ + addr = MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT; + data = page | asid; /* VALID bit is off */ + jump_to_P2(); + ctrl_outl(data, addr); + back_to_P1(); +} + diff --git a/arch/sh/oprofile/Kconfig b/arch/sh/oprofile/Kconfig new file mode 100644 index 00000000000..5ade19801b9 --- /dev/null +++ b/arch/sh/oprofile/Kconfig @@ -0,0 +1,23 @@ + +menu "Profiling support" + depends on EXPERIMENTAL + +config PROFILING + bool "Profiling support (EXPERIMENTAL)" + help + Say Y here to enable the extended profiling support mechanisms used + by profilers such as OProfile. + + +config OPROFILE + tristate "OProfile system profiling (EXPERIMENTAL)" + depends on PROFILING + help + OProfile is a profiling system capable of profiling the + whole system, include the kernel, kernel modules, libraries, + and applications. + + If unsure, say N. + +endmenu + diff --git a/arch/sh/oprofile/Makefile b/arch/sh/oprofile/Makefile new file mode 100644 index 00000000000..686738d4aa3 --- /dev/null +++ b/arch/sh/oprofile/Makefile @@ -0,0 +1,13 @@ +obj-$(CONFIG_OPROFILE) += oprofile.o + +DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ + oprof.o cpu_buffer.o buffer_sync.o \ + event_buffer.o oprofile_files.o \ + oprofilefs.o oprofile_stats.o \ + timer_int.o ) + +profdrvr-y := op_model_null.o +profdrvr-$(CONFIG_CPU_SUBTYPE_SH7750) := op_model_sh7750.o + +oprofile-y := $(DRIVER_OBJS) $(profdrvr-y) + diff --git a/arch/sh/oprofile/op_model_null.c b/arch/sh/oprofile/op_model_null.c new file mode 100644 index 00000000000..a845b088edb --- /dev/null +++ b/arch/sh/oprofile/op_model_null.c @@ -0,0 +1,23 @@ +/* + * arch/sh/oprofile/op_model_null.c + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/errno.h> + +int __init oprofile_arch_init(struct oprofile_operations *ops) +{ + return -ENODEV; +} + +void oprofile_arch_exit(void) +{ +} + diff --git a/arch/sh/oprofile/op_model_sh7750.c b/arch/sh/oprofile/op_model_sh7750.c new file mode 100644 index 00000000000..5ec9ddcc4b0 --- /dev/null +++ b/arch/sh/oprofile/op_model_sh7750.c @@ -0,0 +1,281 @@ +/* + * arch/sh/oprofile/op_model_sh7750.c + * + * OProfile support for SH7750/SH7750S Performance Counters + * + * Copyright (C) 2003, 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/oprofile.h> +#include <linux/profile.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/fs.h> +#include <linux/notifier.h> +#include <asm/uaccess.h> +#include <asm/io.h> + +#define PM_CR_BASE 0xff000084 /* 16-bit */ +#define PM_CTR_BASE 0xff100004 /* 32-bit */ + +#define PMCR1 (PM_CR_BASE + 0x00) +#define PMCR2 (PM_CR_BASE + 0x04) +#define PMCTR1H (PM_CTR_BASE + 0x00) +#define PMCTR1L (PM_CTR_BASE + 0x04) +#define PMCTR2H (PM_CTR_BASE + 0x08) +#define PMCTR2L (PM_CTR_BASE + 0x0c) + +#define PMCR_PMM_MASK 0x0000003f + +#define PMCR_CLKF 0x00000100 +#define PMCR_PMCLR 0x00002000 +#define PMCR_PMST 0x00004000 +#define PMCR_PMEN 0x00008000 + +#define PMCR_ENABLE (PMCR_PMST | PMCR_PMEN) + +/* + * SH7750/SH7750S have 2 perf counters + */ +#define NR_CNTRS 2 + +extern const char *get_cpu_subtype(void); + +struct op_counter_config { + unsigned long enabled; + unsigned long event; + unsigned long count; + + /* Dummy values for userspace tool compliance */ + unsigned long kernel; + unsigned long user; + unsigned long unit_mask; +}; + +static struct op_counter_config ctr[NR_CNTRS]; + +/* + * There are a number of events supported by each counter (33 in total). + * Since we have 2 counters, each counter will take the event code as it + * corresponds to the PMCR PMM setting. Each counter can be configured + * independently. + * + * Event Code Description + * ---------- ----------- + * + * 0x01 Operand read access + * 0x02 Operand write access + * 0x03 UTLB miss + * 0x04 Operand cache read miss + * 0x05 Operand cache write miss + * 0x06 Instruction fetch (w/ cache) + * 0x07 Instruction TLB miss + * 0x08 Instruction cache miss + * 0x09 All operand accesses + * 0x0a All instruction accesses + * 0x0b OC RAM operand access + * 0x0d On-chip I/O space access + * 0x0e Operand access (r/w) + * 0x0f Operand cache miss (r/w) + * 0x10 Branch instruction + * 0x11 Branch taken + * 0x12 BSR/BSRF/JSR + * 0x13 Instruction execution + * 0x14 Instruction execution in parallel + * 0x15 FPU Instruction execution + * 0x16 Interrupt + * 0x17 NMI + * 0x18 trapa instruction execution + * 0x19 UBCA match + * 0x1a UBCB match + * 0x21 Instruction cache fill + * 0x22 Operand cache fill + * 0x23 Elapsed time + * 0x24 Pipeline freeze by I-cache miss + * 0x25 Pipeline freeze by D-cache miss + * 0x27 Pipeline freeze by branch instruction + * 0x28 Pipeline freeze by CPU register + * 0x29 Pipeline freeze by FPU + * + * Unfortunately we don't have a native exception or interrupt for counter + * overflow (although since these counters can run for 16.3 days without + * overflowing, it's not really necessary). + * + * OProfile on the other hand likes to have samples taken periodically, so + * for now we just piggyback the timer interrupt to get the expected + * behavior. + */ + +static int sh7750_timer_notify(struct notifier_block *self, + unsigned long val, void *regs) +{ + oprofile_add_sample((struct pt_regs *)regs, 0); + return 0; +} + +static struct notifier_block sh7750_timer_notifier = { + .notifier_call = sh7750_timer_notify, +}; + +static u64 sh7750_read_counter(int counter) +{ + u32 hi, lo; + + hi = (counter == 0) ? ctrl_inl(PMCTR1H) : ctrl_inl(PMCTR2H); + lo = (counter == 0) ? ctrl_inl(PMCTR1L) : ctrl_inl(PMCTR2L); + + return (u64)((u64)(hi & 0xffff) << 32) | lo; +} + +/* + * Files will be in a path like: + * + * /<oprofilefs mount point>/<counter number>/<file> + * + * So when dealing with <file>, we look to the parent dentry for the counter + * number. + */ +static inline int to_counter(struct file *file) +{ + const unsigned char *name = file->f_dentry->d_parent->d_name.name; + + return (int)simple_strtol(name, NULL, 10); +} + +/* + * XXX: We have 48-bit counters, so we're probably going to want something + * more along the lines of oprofilefs_ullong_to_user().. Truncating to + * unsigned long works fine for now though, as long as we don't attempt to + * profile for too horribly long. + */ +static ssize_t sh7750_read_count(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + int counter = to_counter(file); + u64 val = sh7750_read_counter(counter); + + return oprofilefs_ulong_to_user((unsigned long)val, buf, count, ppos); +} + +static ssize_t sh7750_write_count(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + int counter = to_counter(file); + unsigned long val; + + if (oprofilefs_ulong_from_user(&val, buf, count)) + return -EFAULT; + + /* + * Any write will clear the counter, although only 0 should be + * written for this purpose, as we do not support setting the + * counter to an arbitrary value. + */ + WARN_ON(val != 0); + + if (counter == 0) { + ctrl_outw(ctrl_inw(PMCR1) | PMCR_PMCLR, PMCR1); + } else { + ctrl_outw(ctrl_inw(PMCR2) | PMCR_PMCLR, PMCR2); + } + + return count; +} + +static struct file_operations count_fops = { + .read = sh7750_read_count, + .write = sh7750_write_count, +}; + +static int sh7750_perf_counter_create_files(struct super_block *sb, struct dentry *root) +{ + int i; + + for (i = 0; i < NR_CNTRS; i++) { + struct dentry *dir; + char buf[3]; + + snprintf(buf, sizeof(buf), "%d", i); + dir = oprofilefs_mkdir(sb, root, buf); + + oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled); + oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event); + oprofilefs_create_file(sb, dir, "count", &count_fops); + + /* Dummy entries */ + oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel); + oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user); + oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask); + } + + return 0; +} + +static int sh7750_perf_counter_start(void) +{ + u16 pmcr; + + /* Enable counter 1 */ + if (ctr[0].enabled) { + pmcr = ctrl_inw(PMCR1); + WARN_ON(pmcr & PMCR_PMEN); + + pmcr &= ~PMCR_PMM_MASK; + pmcr |= ctr[0].event; + ctrl_outw(pmcr | PMCR_ENABLE, PMCR1); + } + + /* Enable counter 2 */ + if (ctr[1].enabled) { + pmcr = ctrl_inw(PMCR2); + WARN_ON(pmcr & PMCR_PMEN); + + pmcr &= ~PMCR_PMM_MASK; + pmcr |= ctr[1].event; + ctrl_outw(pmcr | PMCR_ENABLE, PMCR2); + } + + return register_profile_notifier(&sh7750_timer_notifier); +} + +static void sh7750_perf_counter_stop(void) +{ + ctrl_outw(ctrl_inw(PMCR1) & ~PMCR_PMEN, PMCR1); + ctrl_outw(ctrl_inw(PMCR2) & ~PMCR_PMEN, PMCR2); + + unregister_profile_notifier(&sh7750_timer_notifier); +} + +static struct oprofile_operations sh7750_perf_counter_ops = { + .create_files = sh7750_perf_counter_create_files, + .start = sh7750_perf_counter_start, + .stop = sh7750_perf_counter_stop, +}; + +int __init oprofile_arch_init(struct oprofile_operations **ops) +{ + if (!(cpu_data->flags & CPU_HAS_PERF_COUNTER)) + return -ENODEV; + + sh7750_perf_counter_ops.cpu_type = (char *)get_cpu_subtype(); + *ops = &sh7750_perf_counter_ops; + + printk(KERN_INFO "oprofile: using SH-4 (%s) performance monitoring.\n", + sh7750_perf_counter_ops.cpu_type); + + /* Clear the counters */ + ctrl_outw(ctrl_inw(PMCR1) | PMCR_PMCLR, PMCR1); + ctrl_outw(ctrl_inw(PMCR2) | PMCR_PMCLR, PMCR2); + + return 0; +} + +void oprofile_arch_exit(void) +{ +} + diff --git a/arch/sh/ramdisk/Makefile b/arch/sh/ramdisk/Makefile new file mode 100644 index 00000000000..99e1c68673c --- /dev/null +++ b/arch/sh/ramdisk/Makefile @@ -0,0 +1,20 @@ +# +# Makefile for a ramdisk image +# + +obj-y += ramdisk.o + + +O_FORMAT = $(shell $(OBJDUMP) -i | head -n 2 | grep elf32) +img := $(subst ",,$(CONFIG_EMBEDDED_RAMDISK_IMAGE)) +# add $(src) when $(img) is relative +img := $(subst $(src)//,/,$(src)/$(img)) + +quiet_cmd_ramdisk = LD $@ +define cmd_ramdisk + $(LD) -T $(srctree)/$(src)/ld.script -b binary --oformat $(O_FORMAT) \ + -o $@ $(img) +endef + +$(obj)/ramdisk.o: $(img) $(srctree)/$(src)/ld.script + $(call cmd,ramdisk) diff --git a/arch/sh/ramdisk/ld.script b/arch/sh/ramdisk/ld.script new file mode 100644 index 00000000000..94beee248c0 --- /dev/null +++ b/arch/sh/ramdisk/ld.script @@ -0,0 +1,9 @@ +OUTPUT_ARCH(sh) +SECTIONS +{ + .initrd : + { + *(.data) + } +} + diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile new file mode 100644 index 00000000000..3c370a11329 --- /dev/null +++ b/arch/sh/tools/Makefile @@ -0,0 +1,15 @@ +# +# arch/sh/tools/Makefile +# +# Copyright (C) 2003 Paul Mundt +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Shamelessly cloned from ARM. +# + +include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types + @echo ' Generating $@' + $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/sh/tools/gen-mach-types b/arch/sh/tools/gen-mach-types new file mode 100644 index 00000000000..bb2b82234e8 --- /dev/null +++ b/arch/sh/tools/gen-mach-types @@ -0,0 +1,49 @@ +#!/bin/awk +# +# Awk script to generate include/asm-sh/machtypes.h +# Heavily based on arch/arm/tools/gen-mach-types +# +BEGIN { nr = 0 } +/^#/ { next } +/^[ ]*$/ { next } + +NF == 2 { + mach[nr] = $1; + config[nr] = "CONFIG_"$2; + nr++; + } + +END { + printf("/*\n"); + printf(" * Automagically generated, don't touch.\n"); + printf(" */\n"); + printf("#ifndef __ASM_SH_MACHTYPES_H\n"); + printf("#define __ASM_SH_MACHTYPES_H\n"); + printf("\n"); + printf("#include <linux/config.h>\n"); + printf("\n"); + printf("/*\n"); + printf(" * We'll use the following MACH_xxx defs for placeholders for the time\n"); + printf(" * being .. these will all go away once sh_machtype is assigned per-board.\n"); + printf(" *\n"); + printf(" * For now we leave things the way they are for backwards compatibility.\n"); + printf(" */\n"); + printf("\n"); + printf("/* Mach types */\n"); + + for (i = 0; i < nr; i++) { + printf("#ifdef %s\n", config[i]); + printf(" #define MACH_%s\t\t1\n", mach[i]); + printf("#else\n"); + printf(" #define MACH_%s\t\t0\n", mach[i]); + printf("#endif\n"); + } + + printf("\n"); + printf("/* Machtype checks */\n"); + for (i = 0; i < nr; i++) + printf("#define mach_is_%s()\t\t\t(MACH_%s)\n", + tolower(mach[i]), mach[i]); + printf("\n"); + printf("#endif /* __ASM_SH_MACHTYPES_H */\n"); + } diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types new file mode 100644 index 00000000000..0693fbd1f95 --- /dev/null +++ b/arch/sh/tools/mach-types @@ -0,0 +1,31 @@ +# +# List of boards. +# + +# +# MACH_<xxx> CONFIG_<xxx> +# +SE SH_SOLUTION_ENGINE +7751SE SH_7751_SOLUTION_ENGINE +7300SE SH_7300_SOLUTION_ENGINE +73180SE SH_73180_SOLUTION_ENGINE +7751SYSTEMH SH_7751_SYSTEMH +HP600 SH_HP600 +HP620 SH_HP620 +HP680 SH_HP680 +HP690 SH_HP690 +HD64461 HD64461 +HD64465 HD64465 +SH2000 SH_SH2000 +SATURN SH_SATURN +DREAMCAST SH_DREAMCAST +BIGSUR SH_BIGSUR +ADX SH_ADX +MPC1211 SH_MPC1211 +SNAPGEAR SH_SECUREEDGE5410 +HS7751RVOIP SH_HS7751RVOIP +RTS7751R2D SH_RTS7751R2D +EDOSK7705 SH_EDOSK7705 +SH4202_MICRODEV SH_SH4202_MICRODEV +SH03 SH_SH03 + |