Merge branches 'boards' and 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6

29 files changed, 981 insertions, 1800 deletions

diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 6e03a2a7863..2d658209509 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -13,15 +13,13 @@ obj-y    := entry.o wof.o wuf.o etrap.o rtrap.o traps.o $(IRQ_OBJS) \
 	    time.o windows.o cpu.o devices.o \
 	    tadpole.o tick14.o ptrace.o \
 	    unaligned.o una_asm.o muldiv.o \
-	    prom.o of_device.o devres.o
+	    prom.o of_device.o devres.o dma.o
 
 devres-y = ../../../kernel/irq/devres.o
 
 obj-$(CONFIG_PCI) += pcic.o
-obj-$(CONFIG_SUN4) += sun4setup.o
 obj-$(CONFIG_SMP) += trampoline.o smp.o sun4m_smp.o sun4d_smp.o
 obj-$(CONFIG_SUN_AUXIO) += auxio.o
-obj-$(CONFIG_PCI) += ebus.o
 obj-$(CONFIG_SUN_PM) += apc.o pmc.o
 obj-$(CONFIG_MODULES) += module.o sparc_ksyms.o
 obj-$(CONFIG_SPARC_LED) += led.o
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index 5267d48fb2c..4dd1ba752ce 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -12,9 +12,10 @@
 #include <linux/miscdevice.h>
 #include <linux/smp_lock.h>
 #include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
-#include <asm/sbus.h>
 #include <asm/oplib.h>
 #include <asm/uaccess.h>
 #include <asm/auxio.h>
@@ -29,11 +30,10 @@
 #define APC_OBPNAME	"power-management"
 #define APC_DEVNAME "apc"
 
-volatile static u8 __iomem *regs; 
-static int apc_regsize;
+static u8 __iomem *regs;
 static int apc_no_idle __initdata = 0;
 
-#define apc_readb(offs)			(sbus_readb(regs+offs))
+#define apc_readb(offs)		(sbus_readb(regs+offs))
 #define apc_writeb(val, offs) 	(sbus_writeb(val, regs+offs))
 
 /* Specify "apc=noidle" on the kernel command line to 
@@ -69,9 +69,9 @@ static void apc_swift_idle(void)
 #endif
 } 
 
-static inline void apc_free(void)
+static inline void apc_free(struct of_device *op)
 {
-	sbus_iounmap(regs, apc_regsize);
+	of_iounmap(&op->resource[0], regs, resource_size(&op->resource[0]));
 }
 
 static int apc_open(struct inode *inode, struct file *f)
@@ -153,52 +153,56 @@ static const struct file_operations apc_fops = {
 
 static struct miscdevice apc_miscdev = { APC_MINOR, APC_DEVNAME, &apc_fops };
 
-static int __init apc_probe(void)
+static int __devinit apc_probe(struct of_device *op,
+			       const struct of_device_id *match)
 {
-	struct sbus_bus *sbus = NULL;
-	struct sbus_dev *sdev = NULL;
-	int iTmp = 0;
-
-	for_each_sbus(sbus) {
-		for_each_sbusdev(sdev, sbus) {
-			if (!strcmp(sdev->prom_name, APC_OBPNAME)) {
-				goto sbus_done;
-			}
-		}
-	}
+	int err;
 
-sbus_done:
-	if (!sdev) {
-		return -ENODEV;
-	}
-
-	apc_regsize = sdev->reg_addrs[0].reg_size;
-	regs = sbus_ioremap(&sdev->resource[0], 0, 
-				   apc_regsize, APC_OBPNAME);
-	if(!regs) {
+	regs = of_ioremap(&op->resource[0], 0,
+			  resource_size(&op->resource[0]), APC_OBPNAME);
+	if (!regs) {
 		printk(KERN_ERR "%s: unable to map registers\n", APC_DEVNAME);
 		return -ENODEV;
 	}
 
-	iTmp = misc_register(&apc_miscdev);
-	if (iTmp != 0) {
+	err = misc_register(&apc_miscdev);
+	if (err) {
 		printk(KERN_ERR "%s: unable to register device\n", APC_DEVNAME);
-		apc_free();
+		apc_free(op);
 		return -ENODEV;
 	}
 
 	/* Assign power management IDLE handler */
-	if(!apc_no_idle)
+	if (!apc_no_idle)
 		pm_idle = apc_swift_idle;	
 
 	printk(KERN_INFO "%s: power management initialized%s\n", 
-		APC_DEVNAME, apc_no_idle ? " (CPU idle disabled)" : "");
+	       APC_DEVNAME, apc_no_idle ? " (CPU idle disabled)" : "");
+
 	return 0;
 }
 
+static struct of_device_id __initdata apc_match[] = {
+	{
+		.name = APC_OBPNAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, apc_match);
+
+static struct of_platform_driver apc_driver = {
+	.name		= "apc",
+	.match_table	= apc_match,
+	.probe		= apc_probe,
+};
+
+static int __init apc_init(void)
+{
+	return of_register_driver(&apc_driver, &of_bus_type);
+}
+
 /* This driver is not critical to the boot process
  * and is easiest to ioremap when SBus is already
  * initialized, so we install ourselves thusly:
  */
-__initcall(apc_probe);
-
+__initcall(apc_init);
diff --git a/arch/sparc/kernel/auxio.c b/arch/sparc/kernel/auxio.c
index baf4ed3fb0f..09c857215a5 100644
--- a/arch/sparc/kernel/auxio.c
+++ b/arch/sparc/kernel/auxio.c
@@ -6,6 +6,8 @@
 #include <linux/stddef.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <asm/oplib.h>
 #include <asm/io.h>
 #include <asm/auxio.h>
@@ -59,7 +61,7 @@ void __init auxio_probe(void)
 	r.flags = auxregs[0].which_io & 0xF;
 	r.start = auxregs[0].phys_addr;
 	r.end = auxregs[0].phys_addr + auxregs[0].reg_size - 1;
-	auxio_register = sbus_ioremap(&r, 0, auxregs[0].reg_size, "auxio");
+	auxio_register = of_ioremap(&r, 0, auxregs[0].reg_size, "auxio");
 	/* Fix the address on sun4m and sun4c. */
 	if((((unsigned long) auxregs[0].phys_addr) & 3) == 3 ||
 	   sparc_cpu_model == sun4c)
@@ -128,7 +130,7 @@ void __init auxio_power_probe(void)
 	r.flags = regs.which_io & 0xF;
 	r.start = regs.phys_addr;
 	r.end = regs.phys_addr + regs.reg_size - 1;
-	auxio_power_register = (unsigned char *) sbus_ioremap(&r, 0,
+	auxio_power_register = (unsigned char *) of_ioremap(&r, 0,
 	    regs.reg_size, "auxpower");
 
 	/* Display a quick message on the console. */
diff --git a/arch/sparc/kernel/devices.c b/arch/sparc/kernel/devices.c
index b240b8863fd..ad656b044b8 100644
--- a/arch/sparc/kernel/devices.c
+++ b/arch/sparc/kernel/devices.c
@@ -143,7 +143,7 @@ void __init device_scan(void)
 #endif
 	clock_stop_probe();
 
-	if (ARCH_SUN4C_SUN4)
+	if (ARCH_SUN4C)
 		sun4c_probe_memerr_reg();
 
 	return;
diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
new file mode 100644
index 00000000000..ebc8403b035
--- /dev/null
+++ b/arch/sparc/kernel/dma.c
@@ -0,0 +1,227 @@
+/* dma.c: PCI and SBUS DMA accessors for 32-bit sparc.
+ *
+ * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/mm.h>
+
+#ifdef CONFIG_PCI
+#include <linux/pci.h>
+#endif
+
+#include "dma.h"
+
+int dma_supported(struct device *dev, u64 mask)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_dma_supported(to_pci_dev(dev), mask);
+#endif
+	return 0;
+}
+EXPORT_SYMBOL(dma_supported);
+
+int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
+#endif
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(dma_set_mask);
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			 dma_addr_t *dma_handle, gfp_t flag)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_alloc_consistent(to_pci_dev(dev), size, dma_handle);
+#endif
+	return sbus_alloc_consistent(dev, size, dma_handle);
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void dma_free_coherent(struct device *dev, size_t size,
+		       void *cpu_addr, dma_addr_t dma_handle)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_free_consistent(to_pci_dev(dev), size,
+				    cpu_addr, dma_handle);
+		return;
+	}
+#endif
+	sbus_free_consistent(dev, size, cpu_addr, dma_handle);
+}
+EXPORT_SYMBOL(dma_free_coherent);
+
+dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+			  size_t size, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_map_single(to_pci_dev(dev), cpu_addr,
+				      size, (int)direction);
+#endif
+	return sbus_map_single(dev, cpu_addr, size, (int)direction);
+}
+EXPORT_SYMBOL(dma_map_single);
+
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+		      size_t size,
+		      enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_unmap_single(to_pci_dev(dev), dma_addr,
+				 size, (int)direction);
+		return;
+	}
+#endif
+	sbus_unmap_single(dev, dma_addr, size, (int)direction);
+}
+EXPORT_SYMBOL(dma_unmap_single);
+
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+			unsigned long offset, size_t size,
+			enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_map_page(to_pci_dev(dev), page, offset,
+				    size, (int)direction);
+#endif
+	return sbus_map_single(dev, page_address(page) + offset,
+			       size, (int)direction);
+}
+EXPORT_SYMBOL(dma_map_page);
+
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+		    size_t size, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_unmap_page(to_pci_dev(dev), dma_address,
+			       size, (int)direction);
+		return;
+	}
+#endif
+	sbus_unmap_single(dev, dma_address, size, (int)direction);
+}
+EXPORT_SYMBOL(dma_unmap_page);
+
+int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction);
+#endif
+	return sbus_map_sg(dev, sg, nents, direction);
+}
+EXPORT_SYMBOL(dma_map_sg);
+
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+		  int nents, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_unmap_sg(to_pci_dev(dev), sg, nents, (int)direction);
+		return;
+	}
+#endif
+	sbus_unmap_sg(dev, sg, nents, (int)direction);
+}
+EXPORT_SYMBOL(dma_unmap_sg);
+
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			     size_t size, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle,
+					    size, (int)direction);
+		return;
+	}
+#endif
+	sbus_dma_sync_single_for_cpu(dev, dma_handle, size, (int) direction);
+}
+EXPORT_SYMBOL(dma_sync_single_for_cpu);
+
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+				size_t size, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle,
+					       size, (int)direction);
+		return;
+	}
+#endif
+	sbus_dma_sync_single_for_device(dev, dma_handle, size, (int) direction);
+}
+EXPORT_SYMBOL(dma_sync_single_for_device);
+
+void dma_sync_single_range_for_cpu(struct device *dev,
+				   dma_addr_t dma_handle,
+				   unsigned long offset,
+				   size_t size,
+				   enum dma_data_direction direction)
+{
+	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+}
+EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
+
+void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction direction)
+{
+	dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
+}
+EXPORT_SYMBOL(dma_sync_single_range_for_device);
+
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+			 int nelems, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg,
+					nelems, (int)direction);
+		return;
+	}
+#endif
+	BUG();
+}
+EXPORT_SYMBOL(dma_sync_sg_for_cpu);
+
+void dma_sync_sg_for_device(struct device *dev,
+			    struct scatterlist *sg, int nelems,
+			    enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_dma_sync_sg_for_device(to_pci_dev(dev), sg,
+					   nelems, (int)direction);
+		return;
+	}
+#endif
+	BUG();
+}
+EXPORT_SYMBOL(dma_sync_sg_for_device);
+
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return (dma_addr == DMA_ERROR_CODE);
+}
+EXPORT_SYMBOL(dma_mapping_error);
+
+int dma_get_cache_alignment(void)
+{
+	return 32;
+}
+EXPORT_SYMBOL(dma_get_cache_alignment);
diff --git a/arch/sparc/kernel/dma.h b/arch/sparc/kernel/dma.h
new file mode 100644
index 00000000000..f8d8951adb5
--- /dev/null
+++ b/arch/sparc/kernel/dma.h
@@ -0,0 +1,14 @@
+void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp);
+void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba);
+dma_addr_t sbus_map_single(struct device *dev, void *va,
+			   size_t len, int direction);
+void sbus_unmap_single(struct device *dev, dma_addr_t ba,
+		       size_t n, int direction);
+int sbus_map_sg(struct device *dev, struct scatterlist *sg,
+		int n, int direction);
+void sbus_unmap_sg(struct device *dev, struct scatterlist *sg,
+		   int n, int direction);
+void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba,
+				  size_t size, int direction);
+void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba,
+				     size_t size, int direction);
diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c
deleted file mode 100644
index 97294232259..00000000000
--- a/arch/sparc/kernel/ebus.c
+++ /dev/null
@@ -1,393 +0,0 @@
-/*
- * ebus.c: PCI to EBus bridge device.
- *
- * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
- *
- * Adopted for sparc by V. Roganov and G. Raiko.
- * Fixes for different platforms by Pete Zaitcev.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-
-#include <asm/system.h>
-#include <asm/page.h>
-#include <asm/pbm.h>
-#include <asm/ebus.h>
-#include <asm/io.h>
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/bpp.h>
-
-struct linux_ebus *ebus_chain = NULL;
-
-/* We are together with pcic.c under CONFIG_PCI. */
-extern unsigned int pcic_pin_to_irq(unsigned int, const char *name);
-
-/*
- * IRQ Blacklist
- * Here we list PROMs and systems that are known to supply crap as IRQ numbers.
- */
-struct ebus_device_irq {
-	char *name;
-	unsigned int pin;
-};
-
-struct ebus_system_entry {
-	char *esname;
-	struct ebus_device_irq *ipt;
-};
-
-static struct ebus_device_irq je1_1[] = {
-	{ "8042",		 3 },
-	{ "SUNW,CS4231",	 0 },
-	{ "parallel",		 0 },
-	{ "se",			 2 },
-	{ NULL, 0 }
-};
-
-/*
- * Gleb's JE1 supplied reasonable pin numbers, but mine did not (OBP 2.32).
- * Blacklist the sucker... Note that Gleb's system will work.
- */
-static struct ebus_system_entry ebus_blacklist[] = {
-	{ "SUNW,JavaEngine1", je1_1 },
-	{ NULL, NULL }
-};
-
-static struct ebus_device_irq *ebus_blackp = NULL;
-
-/*
- */
-static inline unsigned long ebus_alloc(size_t size)
-{
-	return (unsigned long)kmalloc(size, GFP_ATOMIC);
-}
-
-/*
- */
-static int __init ebus_blacklist_irq(const char *name)
-{
-	struct ebus_device_irq *dp;
-
-	if ((dp = ebus_blackp) != NULL) {
-		for (; dp->name != NULL; dp++) {
-			if (strcmp(name, dp->name) == 0) {
-				return pcic_pin_to_irq(dp->pin, name);
-			}
-		}
-	}
-	return 0;
-}
-
-static void __init fill_ebus_child(struct device_node *dp,
-				   struct linux_ebus_child *dev)
-{
-	const int *regs;
-	const int *irqs;
-	int i, len;
-
-	dev->prom_node = dp;
-	regs = of_get_property(dp, "reg", &len);
-	if (!regs)
-		len = 0;
-	dev->num_addrs = len / sizeof(regs[0]);
-
-	for (i = 0; i < dev->num_addrs; i++) {
-		if (regs[i] >= dev->parent->num_addrs) {
-			prom_printf("UGH: property for %s was %d, need < %d\n",
-				    dev->prom_node->name, len,
-				    dev->parent->num_addrs);
-			panic(__func__);
-		}
-
-		/* XXX resource */
-		dev->resource[i].start =
-			dev->parent->resource[regs[i]].start;
-	}
-
-	for (i = 0; i < PROMINTR_MAX; i++)
-		dev->irqs[i] = PCI_IRQ_NONE;
-
-	if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_node->name)) != 0) {
-		dev->num_irqs = 1;
-	} else {
-		irqs = of_get_property(dp, "interrupts", &len);
-		if (!irqs) {
-			dev->num_irqs = 0;
-			dev->irqs[0] = 0;
-			if (dev->parent->num_irqs != 0) {
-				dev->num_irqs = 1;
-				dev->irqs[0] = dev->parent->irqs[0];
-			}
-		} else {
-			dev->num_irqs = len / sizeof(irqs[0]);
-			if (irqs[0] == 0 || irqs[0] >= 8) {
-				/*
-				 * XXX Zero is a valid pin number...
-				 * This works as long as Ebus is not wired
-				 * to INTA#.
-				 */
-				printk("EBUS: %s got bad irq %d from PROM\n",
-				       dev->prom_node->name, irqs[0]);
-				dev->num_irqs = 0;
-				dev->irqs[0] = 0;
-			} else {
-				dev->irqs[0] =
-					pcic_pin_to_irq(irqs[0],
-							dev->prom_node->name);
-			}
-		}
-	}
-}
-
-static void __init fill_ebus_device(struct device_node *dp,
-				    struct linux_ebus_device *dev)
-{
-	const struct linux_prom_registers *regs;
-	struct linux_ebus_child *child;
-	struct dev_archdata *sd;
-	const int *irqs;
-	int i, n, len;
-	unsigned long baseaddr;
-
-	dev->prom_node = dp;
-
-	regs = of_get_property(dp, "reg", &len);
-	if (!regs)
-		len = 0;
-	if (len % sizeof(struct linux_prom_registers)) {
-		prom_printf("UGH: proplen for %s was %d, need multiple of %d\n",
-			    dev->prom_node->name, len,
-			    (int)sizeof(struct linux_prom_registers));
-		panic(__func__);
-	}
-	dev->num_addrs = len / sizeof(struct linux_prom_registers);
-
-	for (i = 0; i < dev->num_addrs; i++) {
-		/*
-		 * XXX Collect JE-1 PROM
-		 * 
-		 * Example - JS-E with 3.11:
-		 *  /ebus
-		 *      regs 
-		 *        0x00000000, 0x0, 0x00000000, 0x0, 0x00000000,
-		 *        0x82000010, 0x0, 0xf0000000, 0x0, 0x01000000,
-		 *        0x82000014, 0x0, 0x38800000, 0x0, 0x00800000,
-		 *      ranges
-		 *        0x00, 0x00000000, 0x02000010, 0x0, 0x0, 0x01000000,
-		 *        0x01, 0x01000000, 0x02000014, 0x0, 0x0, 0x00800000,
-		 *  /ebus/8042
-		 *      regs
-		 *        0x00000001, 0x00300060, 0x00000008,
-		 *        0x00000001, 0x00300060, 0x00000008,
-		 */
-		n = regs[i].which_io;
-		if (n >= 4) {
-			/* XXX This is copied from old JE-1 by Gleb. */
-			n = (regs[i].which_io - 0x10) >> 2;
-		} else {
-			;
-		}
-
-/*
- * XXX Now as we have regions, why don't we make an on-demand allocation...
- */
-		dev->resource[i].start = 0;
-		if ((baseaddr = dev->bus->self->resource[n].start +
-		    regs[i].phys_addr) != 0) {
-			/* dev->resource[i].name = dev->prom_name; */
-			if ((baseaddr = (unsigned long) ioremap(baseaddr,
-			    regs[i].reg_size)) == 0) {
-				panic("ebus: unable to remap dev %s",
-				      dev->prom_node->name);
-			}
-		}
-		dev->resource[i].start = baseaddr;	/* XXX Unaligned */
-	}
-
-	for (i = 0; i < PROMINTR_MAX; i++)
-		dev->irqs[i] = PCI_IRQ_NONE;
-
-	if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_node->name)) != 0) {
-		dev->num_irqs = 1;
-	} else {
-		irqs = of_get_property(dp, "interrupts", &len);
-		if (!irqs) {
-			dev->num_irqs = 0;
-			if ((dev->irqs[0] = dev->bus->self->irq) != 0) {
-				dev->num_irqs = 1;
-/* P3 */ /* printk("EBUS: child %s irq %d from parent\n", dev->prom_name, dev->irqs[0]); */
-			}
-		} else {
-			dev->num_irqs = 1;  /* dev->num_irqs = len / sizeof(irqs[0]); */
-			if (irqs[0] == 0 || irqs[0] >= 8) {
-				/* See above for the parent. XXX */
-				printk("EBUS: %s got bad irq %d from PROM\n",
-				       dev->prom_node->name, irqs[0]);
-				dev->num_irqs = 0;
-				dev->irqs[0] = 0;
-			} else {
-				dev->irqs[0] =
-					pcic_pin_to_irq(irqs[0],
-							dev->prom_node->name);
-			}
-		}
-	}
-
-	sd = &dev->ofdev.dev.archdata;
-	sd->prom_node = dp;
-	sd->op = &dev->ofdev;
-	sd->iommu = dev->bus->ofdev.dev.parent->archdata.iommu;
-
-	dev->ofdev.node = dp;
-	dev->ofdev.dev.parent = &dev->bus->ofdev.dev;
-	dev->ofdev.dev.bus = &ebus_bus_type;
-	sprintf(dev->ofdev.dev.bus_id, "ebus[%08x]", dp->node);
-
-	/* Register with core */
-	if (of_device_register(&dev->ofdev) != 0)
-		printk(KERN_DEBUG "ebus: device registration error for %s!\n",
-		       dp->path_component_name);
-
-	if ((dp = dp->child) != NULL) {
-		dev->children = (struct linux_ebus_child *)
-			ebus_alloc(sizeof(struct linux_ebus_child));
-
-		child = dev->children;
-		child->next = NULL;
-		child->parent = dev;
-		child->bus = dev->bus;
-		fill_ebus_child(dp, child);
-
-		while ((dp = dp->sibling) != NULL) {
-			child->next = (struct linux_ebus_child *)
-				ebus_alloc(sizeof(struct linux_ebus_child));
-
-			child = child->next;
-			child->next = NULL;
-			child->parent = dev;
-			child->bus = dev->bus;
-			fill_ebus_child(dp, child);
-		}
-	}
-}
-
-void __init ebus_init(void)
-{
-	const struct linux_prom_pci_registers *regs;
-	struct linux_pbm_info *pbm;
-	struct linux_ebus_device *dev;
-	struct linux_ebus *ebus;
-	struct ebus_system_entry *sp;
-	struct pci_dev *pdev;
-	struct pcidev_cookie *cookie;
-	struct device_node *dp;
-	struct resource *p;
-	unsigned short pci_command;
-	int len, reg, nreg;
-	int num_ebus = 0;
-
-	dp = of_find_node_by_path("/");
-	for (sp = ebus_blacklist; sp->esname != NULL; sp++) {
-		if (strcmp(dp->name, sp->esname) == 0) {
-			ebus_blackp = sp->ipt;
-			break;
-		}
-	}
-
-	pdev = pci_get_device(PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_EBUS, NULL);
-	if (!pdev)
-		return;
-
-	cookie = pdev->sysdata;
-	dp = cookie->prom_node;
-
-	ebus_chain = ebus = (struct linux_ebus *)
-			ebus_alloc(sizeof(struct linux_ebus));
-	ebus->next = NULL;
-
-	while (dp) {
-		struct device_node *nd;
-
-		ebus->prom_node = dp;
-		ebus->self = pdev;
-		ebus->parent = pbm = cookie->pbm;
-
-		/* Enable BUS Master. */
-		pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
-		pci_command |= PCI_COMMAND_MASTER;
-		pci_write_config_word(pdev, PCI_COMMAND, pci_command);
-
-		regs = of_get_property(dp, "reg", &len);
-		if (!regs) {
-			prom_printf("%s: can't find reg property\n",
-				    __func__);
-			prom_halt();
-		}
-		nreg = len / sizeof(struct linux_prom_pci_registers);
-
-		p = &ebus->self->resource[0];
-		for (reg = 0; reg < nreg; reg++) {
-			if (!(regs[reg].which_io & 0x03000000))
-				continue;
-
-			(p++)->start = regs[reg].phys_lo;
-		}
-
-		ebus->ofdev.node = dp;
-		ebus->ofdev.dev.parent = &pdev->dev;
-		ebus->ofdev.dev.bus = &ebus_bus_type;
-		sprintf(ebus->ofdev.dev.bus_id, "ebus%d", num_ebus);
-
-		/* Register with core */
-		if (of_device_register(&ebus->ofdev) != 0)
-			printk(KERN_DEBUG "ebus: device registration error for %s!\n",
-			       dp->path_component_name);
-
-
-		nd = dp->child;
-		if (!nd)
-			goto next_ebus;
-
-		ebus->devices = (struct linux_ebus_device *)
-				ebus_alloc(sizeof(struct linux_ebus_device));
-
-		dev = ebus->devices;
-		dev->next = NULL;
-		dev->children = NULL;
-		dev->bus = ebus;
-		fill_ebus_device(nd, dev);
-
-		while ((nd = nd->sibling) != NULL) {
-			dev->next = (struct linux_ebus_device *)
-				ebus_alloc(sizeof(struct linux_ebus_device));
-
-			dev = dev->next;
-			dev->next = NULL;
-			dev->children = NULL;
-			dev->bus = ebus;
-			fill_ebus_device(nd, dev);
-		}
-
-	next_ebus:
-		pdev = pci_get_device(PCI_VENDOR_ID_SUN,
-				       PCI_DEVICE_ID_SUN_EBUS, pdev);
-		if (!pdev)
-			break;
-
-		cookie = pdev->sysdata;
-		dp = cookie->prom_node;
-
-		ebus->next = (struct linux_ebus *)
-			ebus_alloc(sizeof(struct linux_ebus));
-		ebus = ebus->next;
-		ebus->next = NULL;
-		++num_ebus;
-	}
-	if (pdev)
-		pci_dev_put(pdev);
-}
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index e8cdf715a54..faf9ccd9ef5 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -20,11 +20,7 @@
 #include <asm/memreg.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#ifdef CONFIG_SUN4
-#include <asm/pgtsun4.h>
-#else
 #include <asm/pgtsun4c.h>
-#endif
 #include <asm/winmacro.h>
 #include <asm/signal.h>
 #include <asm/obio.h>
@@ -276,17 +272,18 @@ smp4m_ticker:
 	 */
 maybe_smp4m_msg:
 	GET_PROCESSOR4M_ID(o3)
-	set	sun4m_interrupts, %l5
-	ld	[%l5], %o5
+	sethi	%hi(sun4m_irq_percpu), %l5
+	sll	%o3, 2, %o3
+	or	%l5, %lo(sun4m_irq_percpu), %o5
 	sethi	%hi(0x40000000), %o2
-	sll	%o3, 12, %o3
 	ld	[%o5 + %o3], %o1
-	andcc	%o1, %o2, %g0
+	ld	[%o1 + 0x00], %o3	! sun4m_irq_percpu[cpu]->pending
+	andcc	%o3, %o2, %g0
 	be,a	smp4m_ticker
 	 cmp	%l7, 14
-	st	%o2, [%o5 + 0x4]
+	st	%o2, [%o1 + 0x04]	! sun4m_irq_percpu[cpu]->clear=0x40000000
 	WRITE_PAUSE
-	ld	[%o5], %g0
+	ld	[%o1 + 0x00], %g0	! sun4m_irq_percpu[cpu]->pending
 	WRITE_PAUSE
 	or	%l0, PSR_PIL, %l4
 	wr	%l4, 0x0, %psr
@@ -304,16 +301,16 @@ linux_trap_ipi15_sun4m:
 	SAVE_ALL
 	sethi	%hi(0x80000000), %o2
 	GET_PROCESSOR4M_ID(o0)
-	set	sun4m_interrupts, %l5
-	ld	[%l5], %o5
-	sll	%o0, 12, %o0
-	add	%o5, %o0, %o5
-	ld	[%o5], %o3
+	sethi	%hi(sun4m_irq_percpu), %l5
+	or	%l5, %lo(sun4m_irq_percpu), %o5
+	sll	%o0, 2, %o0
+	ld	[%o5 + %o0], %o5
+	ld	[%o5 + 0x00], %o3	! sun4m_irq_percpu[cpu]->pending
 	andcc	%o3, %o2, %g0
 	be	1f			! Must be an NMI async memory error
-	 st	%o2, [%o5 + 4]
+	 st	%o2, [%o5 + 0x04]	! sun4m_irq_percpu[cpu]->clear=0x80000000
 	WRITE_PAUSE
-	ld	[%o5], %g0
+	ld	[%o5 + 0x00], %g0	! sun4m_irq_percpu[cpu]->pending
 	WRITE_PAUSE
 	or	%l0, PSR_PIL, %l4
 	wr	%l4, 0x0, %psr
@@ -327,12 +324,11 @@ linux_trap_ipi15_sun4m:
 1:
 	/* NMI async memory error handling. */
 	sethi	%hi(0x80000000), %l4
-	sethi	%hi(0x4000), %o3
-	sub	%o5, %o0, %o5
-	add	%o5, %o3, %l5
-	st	%l4, [%l5 + 0xc]
+	sethi	%hi(sun4m_irq_global), %o5
+	ld	[%o5 + %lo(sun4m_irq_global)], %l5
+	st	%l4, [%l5 + 0x0c]	! sun4m_irq_global->mask_set=0x80000000
 	WRITE_PAUSE
-	ld	[%l5], %g0
+	ld	[%l5 + 0x00], %g0	! sun4m_irq_global->pending
 	WRITE_PAUSE
 	or	%l0, PSR_PIL, %l4
 	wr	%l4, 0x0, %psr
@@ -341,9 +337,9 @@ linux_trap_ipi15_sun4m:
 	WRITE_PAUSE
 	call	sun4m_nmi
 	 nop
-	st	%l4, [%l5 + 0x8]
+	st	%l4, [%l5 + 0x08]	! sun4m_irq_global->mask_clear=0x80000000
 	WRITE_PAUSE
-	ld	[%l5], %g0
+	ld	[%l5 + 0x00], %g0	! sun4m_irq_global->pending
 	WRITE_PAUSE
 	RESTORE_ALL
 
@@ -775,11 +771,7 @@ vac_linesize_patch_32:		subcc	%l7, 32, %l7
  * Ugly, but we cant use hardware flushing on the sun4 and we'd require
  * two instructions (Anton)
  */
-#ifdef CONFIG_SUN4
-vac_hwflush_patch1_on:		nop
-#else
 vac_hwflush_patch1_on:		addcc	%l7, -PAGE_SIZE, %l7
-#endif
 
 vac_hwflush_patch2_on:		sta	%g0, [%l3 + %l7] ASI_HWFLUSHSEG
 
@@ -798,42 +790,10 @@ vac_hwflush_patch2_on:		sta	%g0, [%l3 + %l7] ASI_HWFLUSHSEG
 ! %l7 = 1 for textfault
 ! We want error in %l5, vaddr in %l6
 sun4c_fault:
-#ifdef CONFIG_SUN4
-	sethi	%hi(sun4c_memerr_reg), %l4
-	ld	[%l4+%lo(sun4c_memerr_reg)], %l4  ! memerr ctrl reg addr
-	ld	[%l4], %l6		! memerr ctrl reg
-	ld	[%l4 + 4], %l5		! memerr vaddr reg
-	andcc	%l6, 0x80, %g0		! check for error type
-	st	%g0, [%l4 + 4]		! clear the error
-	be	0f			! normal error
-	 sethi	%hi(AC_BUS_ERROR), %l4	! bus err reg addr
-
-	call	prom_halt	! something weird happened
-					! what exactly did happen?
-					! what should we do here?
-
-0:	or	%l4, %lo(AC_BUS_ERROR), %l4	! bus err reg addr
-	lduba	[%l4] ASI_CONTROL, %l6	! bus err reg
-
-	cmp    %l7, 1			! text fault?
-	be	1f			! yes
-	 nop
-
-	ld     [%l1], %l4		! load instruction that caused fault
-	srl	%l4, 21, %l4
-	andcc	%l4, 1, %g0		! store instruction?
-
-	be	1f			! no
-	 sethi	%hi(SUN4C_SYNC_BADWRITE), %l4 ! yep
-					! %lo(SUN4C_SYNC_BADWRITE) = 0
-	or	%l4, %l6, %l6		! set write bit to emulate sun4c
-1:
-#else
 	sethi	%hi(AC_SYNC_ERR), %l4
 	add	%l4, 0x4, %l6			! AC_SYNC_VA in %l6
 	lda	[%l6] ASI_CONTROL, %l5		! Address
 	lda	[%l4] ASI_CONTROL, %l6		! Error, retained for a bit
-#endif
 
 	andn	%l5, 0xfff, %l5			! Encode all info into l7
 	srl	%l6, 14, %l4
@@ -880,12 +840,7 @@ sun4c_fault:
 	or      %l4, %lo(swapper_pg_dir), %l4
 	sll     %l6, 2, %l6
 	ld      [%l4 + %l6], %l4
-#ifdef CONFIG_SUN4
-	sethi	%hi(PAGE_MASK), %l6
-	andcc	%l4, %l6, %g0
-#else
 	andcc   %l4, PAGE_MASK, %g0
-#endif
 	be      sun4c_fault_fromuser
 	 lduXa  [%l5] ASI_SEGMAP, %l4
 
@@ -937,11 +892,7 @@ invalid_segment_patch1:
 	ld	[%l6 + 0x08], %l3	! tmp = entry->vaddr
 
 	! Flush segment from the cache.
-#ifdef CONFIG_SUN4
-	sethi	%hi((128 * 1024)), %l7
-#else
 	sethi	%hi((64 * 1024)), %l7
-#endif
 9:
 vac_hwflush_patch1:
 vac_linesize_patch:
@@ -1029,12 +980,7 @@ invalid_segment_patch2:
 	or	%l4, %lo(swapper_pg_dir), %l4
 	sll	%l3, 2, %l3
 	ld	[%l4 + %l3], %l4
-#ifndef CONFIG_SUN4
 	and	%l4, PAGE_MASK, %l4
-#else
-	sethi	%hi(PAGE_MASK), %l6
-	and	%l4, %l6, %l4
-#endif
 
 	srl	%l5, (PAGE_SHIFT - 2), %l6
 	and	%l6, ((SUN4C_PTRS_PER_PTE - 1) << 2), %l6
diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S
index 50d9a16af79..2d325fd8457 100644
--- a/arch/sparc/kernel/head.S
+++ b/arch/sparc/kernel/head.S
@@ -63,15 +63,9 @@ cputypvar_sun4m:
 
 	.align 4
 
-#ifndef CONFIG_SUN4
 sun4_notsup:
-	.asciz	"Sparc-Linux sun4 needs a specially compiled kernel, turn CONFIG_SUN4 on.\n\n"
+	.asciz	"Sparc-Linux sun4 support does no longer exist.\n\n"
 	.align 4
-#else
-sun4cdm_notsup:
-	.asciz	"Kernel compiled with CONFIG_SUN4 cannot run on SUN4C/SUN4M/SUN4D\nTurn CONFIG_SUN4 off.\n\n"
-	.align 4
-#endif
 
 sun4e_notsup:
         .asciz  "Sparc-Linux sun4e support does not exist\n\n"
@@ -780,15 +774,6 @@ execute_in_high_mem:
 		 nop
 
 found_version:
-#ifdef CONFIG_SUN4
-/* For people who try sun4 kernels, even if Configure.help advises them. */
-		ld	[%g7 + 0x68], %o1
-		set	sun4cdm_notsup, %o0
-		call	%o1
-		 nop
-		b	halt_me
-		 nop
-#endif
 /* Get the machine type via the mysterious romvec node operations. */
 
 		add	%g7, 0x1c, %l1		
@@ -1150,15 +1135,6 @@ sun4c_continue_boot:
 		 nop
 
 sun4_init:
-#ifdef CONFIG_SUN4
-/* There, happy now Adrian? */
-		set	cputypval, %o2		! Let everyone know we
-		set	' ', %o0			! are a "sun4 " architecture
-		stb	%o0, [%o2 + 0x4]		
-
-		b got_prop 
-		 nop
-#else
 		sethi   %hi(SUN4_PROM_VECTOR+0x84), %o1
 		ld      [%o1 + %lo(SUN4_PROM_VECTOR+0x84)], %o1
 		set     sun4_notsup, %o0
@@ -1170,7 +1146,7 @@ sun4_init:
 		 nop
 1:		ba      1b                      ! Cannot exit into KMON
 		 nop
-#endif
+
 no_sun4e_here:
 		ld	[%g7 + 0x68], %o1
 		set	sun4e_notsup, %o0
diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c
index fc511f3c4c1..223a6582e1e 100644
--- a/arch/sparc/kernel/idprom.c
+++ b/arch/sparc/kernel/idprom.c
@@ -12,10 +12,6 @@
 #include <asm/oplib.h>
 #include <asm/idprom.h>
 #include <asm/machines.h>  /* Fun with Sun released architectures. */
-#ifdef CONFIG_SUN4
-#include <asm/sun4paddr.h>
-extern void sun4setup(void);
-#endif
 
 struct idprom *idprom;
 static struct idprom idprom_buffer;
@@ -101,7 +97,4 @@ void __init idprom_init(void)
 		    idprom->id_ethaddr[0], idprom->id_ethaddr[1],
 		    idprom->id_ethaddr[2], idprom->id_ethaddr[3],
 		    idprom->id_ethaddr[4], idprom->id_ethaddr[5]);
-#ifdef CONFIG_SUN4
-	sun4setup();
-#endif
 }
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 2a8a847764d..4f025b36934 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -42,10 +42,13 @@
 #include <asm/vaddrs.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/sbus.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/dma.h>
+#include <asm/iommu.h>
+#include <asm/io-unit.h>
+
+#include "dma.h"
 
 #define mmu_inval_dma_area(p, l)	/* Anton pulled it out for 2.4.0-xx */
 
@@ -139,15 +142,6 @@ void iounmap(volatile void __iomem *virtual)
 	}
 }
 
-/*
- */
-void __iomem *sbus_ioremap(struct resource *phyres, unsigned long offset,
-    unsigned long size, char *name)
-{
-	return _sparc_alloc_io(phyres->flags & 0xF,
-	    phyres->start + offset, size, name);
-}
-
 void __iomem *of_ioremap(struct resource *res, unsigned long offset,
 			 unsigned long size, char *name)
 {
@@ -164,13 +158,6 @@ void of_iounmap(struct resource *res, void __iomem *base, unsigned long size)
 EXPORT_SYMBOL(of_iounmap);
 
 /*
- */
-void sbus_iounmap(volatile void __iomem *addr, unsigned long size)
-{
-	iounmap(addr);
-}
-
-/*
  * Meat of mapping
  */
 static void __iomem *_sparc_alloc_io(unsigned int busno, unsigned long phys,
@@ -246,63 +233,19 @@ static void _sparc_free_io(struct resource *res)
 
 #ifdef CONFIG_SBUS
 
-void sbus_set_sbus64(struct sbus_dev *sdev, int x)
+void sbus_set_sbus64(struct device *dev, int x)
 {
 	printk("sbus_set_sbus64: unsupported\n");
 }
 
-extern unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq);
-void __init sbus_fill_device_irq(struct sbus_dev *sdev)
-{
-	struct linux_prom_irqs irqs[PROMINTR_MAX];
-	int len;
-
-	len = prom_getproperty(sdev->prom_node, "intr",
-			       (char *)irqs, sizeof(irqs));
-	if (len != -1) {
-		sdev->num_irqs = len / 8;
-		if (sdev->num_irqs == 0) {
-			sdev->irqs[0] = 0;
-		} else if (sparc_cpu_model == sun4d) {
-			for (len = 0; len < sdev->num_irqs; len++)
-				sdev->irqs[len] =
-					sun4d_build_irq(sdev, irqs[len].pri);
-		} else {
-			for (len = 0; len < sdev->num_irqs; len++)
-				sdev->irqs[len] = irqs[len].pri;
-		}
-	} else {
-		int interrupts[PROMINTR_MAX];
-
-		/* No "intr" node found-- check for "interrupts" node.
-		 * This node contains SBus interrupt levels, not IPLs
-		 * as in "intr", and no vector values.  We convert
-		 * SBus interrupt levels to PILs (platform specific).
-		 */
-		len = prom_getproperty(sdev->prom_node, "interrupts",
-				       (char *)interrupts, sizeof(interrupts));
-		if (len == -1) {
-			sdev->irqs[0] = 0;
-			sdev->num_irqs = 0;
-		} else {
-			sdev->num_irqs = len / sizeof(int);
-			for (len = 0; len < sdev->num_irqs; len++) {
-				sdev->irqs[len] =
-					sbint_to_irq(sdev, interrupts[len]);
-			}
-		}
-	} 
-}
-
 /*
  * Allocate a chunk of memory suitable for DMA.
  * Typically devices use them for control blocks.
  * CPU may access them without any explicit flushing.
- *
- * XXX Some clever people know that sdev is not used and supply NULL. Watch.
  */
-void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp)
+void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp)
 {
+	struct of_device *op = to_of_device(dev);
 	unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK;
 	unsigned long va;
 	struct resource *res;
@@ -336,13 +279,10 @@ void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp)
 	 * XXX That's where sdev would be used. Currently we load
 	 * all iommu tables with the same translations.
 	 */
-	if (mmu_map_dma_area(dma_addrp, va, res->start, len_total) != 0)
+	if (mmu_map_dma_area(dev, dma_addrp, va, res->start, len_total) != 0)
 		goto err_noiommu;
 
-	/* Set the resource name, if known. */
-	if (sdev) {
-		res->name = sdev->prom_name;
-	}
+	res->name = op->node->name;
 
 	return (void *)(unsigned long)res->start;
 
@@ -356,7 +296,7 @@ err_nopages:
 	return NULL;
 }
 
-void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba)
+void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba)
 {
 	struct resource *res;
 	struct page *pgv;
@@ -383,8 +323,8 @@ void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba)
 	kfree(res);
 
 	/* mmu_inval_dma_area(va, n); */ /* it's consistent, isn't it */
-	pgv = mmu_translate_dvma(ba);
-	mmu_unmap_dma_area(ba, n);
+	pgv = virt_to_page(p);
+	mmu_unmap_dma_area(dev, ba, n);
 
 	__free_pages(pgv, get_order(n));
 }
@@ -394,7 +334,7 @@ void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba)
  * CPU view of this memory may be inconsistent with
  * a device view and explicit flushing is necessary.
  */
-dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *va, size_t len, int direction)
+dma_addr_t sbus_map_single(struct device *dev, void *va, size_t len, int direction)
 {
 	/* XXX why are some lengths signed, others unsigned? */
 	if (len <= 0) {
@@ -404,17 +344,17 @@ dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *va, size_t len, int dire
 	if (len > 256*1024) {			/* __get_free_pages() limit */
 		return 0;
 	}
-	return mmu_get_scsi_one(va, len, sdev->bus);
+	return mmu_get_scsi_one(dev, va, len);
 }
 
-void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t ba, size_t n, int direction)
+void sbus_unmap_single(struct device *dev, dma_addr_t ba, size_t n, int direction)
 {
-	mmu_release_scsi_one(ba, n, sdev->bus);
+	mmu_release_scsi_one(dev, ba, n);
 }
 
-int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
+int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
 {
-	mmu_get_scsi_sgl(sg, n, sdev->bus);
+	mmu_get_scsi_sgl(dev, sg, n);
 
 	/*
 	 * XXX sparc64 can return a partial length here. sun4c should do this
@@ -423,145 +363,28 @@ int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direct
 	return n;
 }
 
-void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
-{
-	mmu_release_scsi_sgl(sg, n, sdev->bus);
-}
-
-/*
- */
-void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t ba, size_t size, int direction)
-{
-#if 0
-	unsigned long va;
-	struct resource *res;
-
-	/* We do not need the resource, just print a message if invalid. */
-	res = _sparc_find_resource(&_sparc_dvma, ba);
-	if (res == NULL)
-		panic("sbus_dma_sync_single: 0x%x\n", ba);
-
-	va = page_address(mmu_translate_dvma(ba)); /* XXX higmem */
-	/*
-	 * XXX This bogosity will be fixed with the iommu rewrite coming soon
-	 * to a kernel near you. - Anton
-	 */
-	/* mmu_inval_dma_area(va, (size + PAGE_SIZE-1) & PAGE_MASK); */
-#endif
-}
-
-void sbus_dma_sync_single_for_device(struct sbus_dev *sdev, dma_addr_t ba, size_t size, int direction)
+void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
 {
-#if 0
-	unsigned long va;
-	struct resource *res;
-
-	/* We do not need the resource, just print a message if invalid. */
-	res = _sparc_find_resource(&_sparc_dvma, ba);
-	if (res == NULL)
-		panic("sbus_dma_sync_single: 0x%x\n", ba);
-
-	va = page_address(mmu_translate_dvma(ba)); /* XXX higmem */
-	/*
-	 * XXX This bogosity will be fixed with the iommu rewrite coming soon
-	 * to a kernel near you. - Anton
-	 */
-	/* mmu_inval_dma_area(va, (size + PAGE_SIZE-1) & PAGE_MASK); */
-#endif
+	mmu_release_scsi_sgl(dev, sg, n);
 }
 
-void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
+void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba, size_t size, int direction)
 {
-	printk("sbus_dma_sync_sg_for_cpu: not implemented yet\n");
 }
 
-void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
+void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba, size_t size, int direction)
 {
-	printk("sbus_dma_sync_sg_for_device: not implemented yet\n");
-}
-
-/* Support code for sbus_init().  */
-/*
- * XXX This functions appears to be a distorted version of
- * prom_sbus_ranges_init(), with all sun4d stuff cut away.
- * Ask DaveM what is going on here, how is sun4d supposed to work... XXX
- */
-/* added back sun4d patch from Thomas Bogendoerfer - should be OK (crn) */
-void __init sbus_arch_bus_ranges_init(struct device_node *pn, struct sbus_bus *sbus)
-{
-	int parent_node = pn->node;
-
-	if (sparc_cpu_model == sun4d) {
-		struct linux_prom_ranges iounit_ranges[PROMREG_MAX];
-		int num_iounit_ranges, len;
-
-		len = prom_getproperty(parent_node, "ranges",
-				       (char *) iounit_ranges,
-				       sizeof (iounit_ranges));
-		if (len != -1) {
-			num_iounit_ranges =
-				(len / sizeof(struct linux_prom_ranges));
-			prom_adjust_ranges(sbus->sbus_ranges,
-					   sbus->num_sbus_ranges,
-					   iounit_ranges, num_iounit_ranges);
-		}
-	}
 }
 
-void __init sbus_setup_iommu(struct sbus_bus *sbus, struct device_node *dp)
-{
-#ifndef CONFIG_SUN4
-	struct device_node *parent = dp->parent;
-
-	if (sparc_cpu_model != sun4d &&
-	    parent != NULL &&
-	    !strcmp(parent->name, "iommu")) {
-		extern void iommu_init(int iommu_node, struct sbus_bus *sbus);
-
-		iommu_init(parent->node, sbus);
-	}
-
-	if (sparc_cpu_model == sun4d) {
-		extern void iounit_init(int sbi_node, int iounit_node,
-					struct sbus_bus *sbus);
-
-		iounit_init(dp->node, parent->node, sbus);
-	}
-#endif
-}
-
-void __init sbus_setup_arch_props(struct sbus_bus *sbus, struct device_node *dp)
-{
-	if (sparc_cpu_model == sun4d) {
-		struct device_node *parent = dp->parent;
-
-		sbus->devid = of_getintprop_default(parent, "device-id", 0);
-		sbus->board = of_getintprop_default(parent, "board#", 0);
-	}
-}
-
-int __init sbus_arch_preinit(void)
+static int __init sparc_register_ioport(void)
 {
 	register_proc_sparc_ioport();
 
-#ifdef CONFIG_SUN4
-	{
-		extern void sun4_dvma_init(void);
-		sun4_dvma_init();
-	}
-	return 1;
-#else
 	return 0;
-#endif
 }
 
-void __init sbus_arch_postinit(void)
-{
-	if (sparc_cpu_model == sun4d) {
-		extern void sun4d_init_sbi_irq(void);
-		sun4d_init_sbi_irq();
-	}
-}
+arch_initcall(sparc_register_ioport);
+
 #endif /* CONFIG_SBUS */
 
 #ifdef CONFIG_PCI
diff --git a/arch/sparc/kernel/irq.h b/arch/sparc/kernel/irq.h
index 32ef3ebd0a8..db751388153 100644
--- a/arch/sparc/kernel/irq.h
+++ b/arch/sparc/kernel/irq.h
@@ -13,7 +13,6 @@ BTFIXUPDEF_CALL(void, enable_irq, unsigned int)
 BTFIXUPDEF_CALL(void, disable_pil_irq, unsigned int)
 BTFIXUPDEF_CALL(void, enable_pil_irq, unsigned int)
 BTFIXUPDEF_CALL(void, clear_clock_irq, void)
-BTFIXUPDEF_CALL(void, clear_profile_irq, int)
 BTFIXUPDEF_CALL(void, load_profile_irq, int, unsigned int)
 
 static inline void __disable_irq(unsigned int irq)
@@ -41,11 +40,6 @@ static inline void clear_clock_irq(void)
 	BTFIXUP_CALL(clear_clock_irq)();
 }
 
-static inline void clear_profile_irq(int irq)
-{
-	BTFIXUP_CALL(clear_profile_irq)(irq);
-}
-
 static inline void load_profile_irq(int cpu, int limit)
 {
 	BTFIXUP_CALL(load_profile_irq)(cpu, limit);
diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c
index f58c537446a..0837bd52e28 100644
--- a/arch/sparc/kernel/of_device.c
+++ b/arch/sparc/kernel/of_device.c
@@ -29,15 +29,38 @@ struct of_device *of_find_device_by_node(struct device_node *dp)
 }
 EXPORT_SYMBOL(of_find_device_by_node);
 
-#ifdef CONFIG_PCI
-struct bus_type ebus_bus_type;
-EXPORT_SYMBOL(ebus_bus_type);
-#endif
+unsigned int irq_of_parse_and_map(struct device_node *node, int index)
+{
+	struct of_device *op = of_find_device_by_node(node);
+
+	if (!op || index >= op->num_irqs)
+		return 0;
+
+	return op->irqs[index];
+}
+EXPORT_SYMBOL(irq_of_parse_and_map);
+
+/* Take the archdata values for IOMMU, STC, and HOSTDATA found in
+ * BUS and propagate to all child of_device objects.
+ */
+void of_propagate_archdata(struct of_device *bus)
+{
+	struct dev_archdata *bus_sd = &bus->dev.archdata;
+	struct device_node *bus_dp = bus->node;
+	struct device_node *dp;
+
+	for (dp = bus_dp->child; dp; dp = dp->sibling) {
+		struct of_device *op = of_find_device_by_node(dp);
 
-#ifdef CONFIG_SBUS
-struct bus_type sbus_bus_type;
-EXPORT_SYMBOL(sbus_bus_type);
-#endif
+		op->dev.archdata.iommu = bus_sd->iommu;
+		op->dev.archdata.stc = bus_sd->stc;
+		op->dev.archdata.host_controller = bus_sd->host_controller;
+		op->dev.archdata.numa_node = bus_sd->numa_node;
+
+		if (dp->child)
+			of_propagate_archdata(op);
+	}
+}
 
 struct bus_type of_platform_bus_type;
 EXPORT_SYMBOL(of_platform_bus_type);
@@ -327,6 +350,27 @@ static int __init build_one_resource(struct device_node *parent,
 	return 1;
 }
 
+static int __init use_1to1_mapping(struct device_node *pp)
+{
+	/* If we have a ranges property in the parent, use it.  */
+	if (of_find_property(pp, "ranges", NULL) != NULL)
+		return 0;
+
+	/* Some SBUS devices use intermediate nodes to express
+	 * hierarchy within the device itself.  These aren't
+	 * real bus nodes, and don't have a 'ranges' property.
+	 * But, we should still pass the translation work up
+	 * to the SBUS itself.
+	 */
+	if (!strcmp(pp->name, "dma") ||
+	    !strcmp(pp->name, "espdma") ||
+	    !strcmp(pp->name, "ledma") ||
+	    !strcmp(pp->name, "lebuffer"))
+		return 0;
+
+	return 1;
+}
+
 static int of_resource_verbose;
 
 static void __init build_device_resources(struct of_device *op,
@@ -373,10 +417,7 @@ static void __init build_device_resources(struct of_device *op,
 
 		flags = bus->get_flags(reg, 0);
 
-		/* If the immediate parent has no ranges property to apply,
-		 * just use a 1<->1 mapping.
-		 */
-		if (of_find_property(pp, "ranges", NULL) == NULL) {
+		if (use_1to1_mapping(pp)) {
 			result = of_read_addr(addr, na);
 			goto build_res;
 		}
@@ -565,15 +606,6 @@ static int __init of_bus_driver_init(void)
 	int err;
 
 	err = of_bus_type_init(&of_platform_bus_type, "of");
-#ifdef CONFIG_PCI
-	if (!err)
-		err = of_bus_type_init(&ebus_bus_type, "ebus");
-#endif
-#ifdef CONFIG_SBUS
-	if (!err)
-		err = of_bus_type_init(&sbus_bus_type, "sbus");
-#endif
-
 	if (!err)
 		scan_of_devices();
 
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index a6a6f982337..462584e55fb 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -17,8 +17,6 @@
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 
-#include <asm/ebus.h>
-#include <asm/sbus.h> /* for sanity check... */
 #include <asm/swift.h> /* for cache flushing. */
 #include <asm/io.h>
 
@@ -430,7 +428,6 @@ static int __init pcic_init(void)
 
 	pcic_pbm_scan_bus(pcic);
 
-	ebus_init();
 	return 0;
 }
 
@@ -493,10 +490,6 @@ static void pcic_map_pci_device(struct linux_pcic *pcic,
 				 * do ioremap() before accessing PC-style I/O,
 				 * we supply virtual, ready to access address.
 				 *
-				 * Ebus devices do not come here even if
-				 * CheerIO makes a similar conversion.
-				 * See ebus.c for details.
-				 *
 				 * Note that request_region()
 				 * works for these devices.
 				 *
@@ -677,7 +670,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 }
 
 /*
- * pcic_pin_to_irq() is exported to ebus.c.
+ * pcic_pin_to_irq() is exported to bus probing code
  */
 unsigned int
 pcic_pin_to_irq(unsigned int pin, const char *name)
@@ -904,11 +897,6 @@ static void pcic_enable_irq(unsigned int irq_nr)
 	local_irq_restore(flags);
 }
 
-static void pcic_clear_profile_irq(int cpu)
-{
-	printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__);
-}
-
 static void pcic_load_profile_irq(int cpu, unsigned int limit)
 {
 	printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__);
@@ -934,7 +922,6 @@ void __init sun4m_pci_init_IRQ(void)
 	BTFIXUPSET_CALL(enable_pil_irq, pcic_enable_pil_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(disable_pil_irq, pcic_disable_pil_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(clear_clock_irq, pcic_clear_clock_irq, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(clear_profile_irq, pcic_clear_profile_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(load_profile_irq, pcic_load_profile_irq, BTFIXUPCALL_NORM);
 }
 
diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c
index 7eca8871ff4..2afcfab4f11 100644
--- a/arch/sparc/kernel/pmc.c
+++ b/arch/sparc/kernel/pmc.c
@@ -8,11 +8,11 @@
 #include <linux/fs.h>
 #include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/miscdevice.h>
 #include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
-#include <asm/sbus.h>
 #include <asm/oplib.h>
 #include <asm/uaccess.h>
 #include <asm/auxio.h>
@@ -23,17 +23,15 @@
  * #define PMC_NO_IDLE
  */
 
-#define PMC_MINOR	MISC_DYNAMIC_MINOR
 #define PMC_OBPNAME	"SUNW,pmc"
 #define PMC_DEVNAME "pmc"
 
 #define PMC_IDLE_REG	0x00
 #define PMC_IDLE_ON		0x01
 
-volatile static u8 __iomem *regs; 
-static int pmc_regsize;
+static u8 __iomem *regs;
 
-#define pmc_readb(offs)			(sbus_readb(regs+offs))
+#define pmc_readb(offs)		(sbus_readb(regs+offs))
 #define pmc_writeb(val, offs) 	(sbus_writeb(val, regs+offs))
 
 /* 
@@ -53,31 +51,11 @@ void pmc_swift_idle(void)
 #endif
 } 
 
-static inline void pmc_free(void)
+static int __devinit pmc_probe(struct of_device *op,
+			       const struct of_device_id *match)
 {
-	sbus_iounmap(regs, pmc_regsize);
-}
-
-static int __init pmc_probe(void)
-{
-	struct sbus_bus *sbus = NULL;
-	struct sbus_dev *sdev = NULL;
-	for_each_sbus(sbus) {
-		for_each_sbusdev(sdev, sbus) {
-			if (!strcmp(sdev->prom_name, PMC_OBPNAME)) {
-				goto sbus_done;
-			}
-		}
-	}
-
-sbus_done:
-	if (!sdev) {
-		return -ENODEV;
-	}
-
-	pmc_regsize = sdev->reg_addrs[0].reg_size;
-	regs = sbus_ioremap(&sdev->resource[0], 0, 
-				   pmc_regsize, PMC_OBPNAME);
+	regs = of_ioremap(&op->resource[0], 0,
+			  resource_size(&op->resource[0]), PMC_OBPNAME);
 	if (!regs) {
 		printk(KERN_ERR "%s: unable to map registers\n", PMC_DEVNAME);
 		return -ENODEV;
@@ -92,8 +70,27 @@ sbus_done:
 	return 0;
 }
 
+static struct of_device_id __initdata pmc_match[] = {
+	{
+		.name = PMC_OBPNAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, pmc_match);
+
+static struct of_platform_driver pmc_driver = {
+	.name		= "pmc",
+	.match_table	= pmc_match,
+	.probe		= pmc_probe,
+};
+
+static int __init pmc_init(void)
+{
+	return of_register_driver(&pmc_driver, &of_bus_type);
+}
+
 /* This driver is not critical to the boot process
  * and is easiest to ioremap when SBus is already
  * initialized, so we install ourselves thusly:
  */
-__initcall(pmc_probe);
+__initcall(pmc_init);
diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c
index 4bb430940a6..e8c43ffe317 100644
--- a/arch/sparc/kernel/process.c
+++ b/arch/sparc/kernel/process.c
@@ -75,7 +75,7 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	for (;;) {
-		if (ARCH_SUN4C_SUN4) {
+		if (ARCH_SUN4C) {
 			static int count = HZ;
 			static unsigned long last_jiffies;
 			static unsigned long last_faults;
diff --git a/arch/sparc/kernel/prom.c b/arch/sparc/kernel/prom.c
index cd4fb79aa3a..eee5efcfe50 100644
--- a/arch/sparc/kernel/prom.c
+++ b/arch/sparc/kernel/prom.c
@@ -54,6 +54,9 @@ int of_getintprop_default(struct device_node *np, const char *name, int def)
 }
 EXPORT_SYMBOL(of_getintprop_default);
 
+DEFINE_MUTEX(of_set_property_mutex);
+EXPORT_SYMBOL(of_set_property_mutex);
+
 int of_set_property(struct device_node *dp, const char *name, void *val, int len)
 {
 	struct property **prevp;
@@ -77,7 +80,10 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len
 			void *old_val = prop->value;
 			int ret;
 
+			mutex_lock(&of_set_property_mutex);
 			ret = prom_setprop(dp->node, (char *) name, val, len);
+			mutex_unlock(&of_set_property_mutex);
+
 			err = -EINVAL;
 			if (ret >= 0) {
 				prop->value = new_val;
@@ -436,7 +442,6 @@ static void __init of_console_init(void)
 
 	switch (prom_vers) {
 	case PROM_V0:
-	case PROM_SUN4:
 		skip = 0;
 		switch (*romvec->pv_stdout) {
 		case PROMDEV_SCREEN:
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
index 9e451b21202..24fe3078bd4 100644
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -213,23 +213,25 @@ void __init setup_arch(char **cmdline_p)
 	/* Initialize PROM console and command line. */
 	*cmdline_p = prom_getbootargs();
 	strcpy(boot_command_line, *cmdline_p);
+	parse_early_param();
 
 	/* Set sparc_cpu_model */
 	sparc_cpu_model = sun_unknown;
-	if(!strcmp(&cputypval,"sun4 ")) { sparc_cpu_model=sun4; }
-	if(!strcmp(&cputypval,"sun4c")) { sparc_cpu_model=sun4c; }
-	if(!strcmp(&cputypval,"sun4m")) { sparc_cpu_model=sun4m; }
-	if(!strcmp(&cputypval,"sun4s")) { sparc_cpu_model=sun4m; }  /* CP-1200 with PROM 2.30 -E */
-	if(!strcmp(&cputypval,"sun4d")) { sparc_cpu_model=sun4d; }
-	if(!strcmp(&cputypval,"sun4e")) { sparc_cpu_model=sun4e; }
-	if(!strcmp(&cputypval,"sun4u")) { sparc_cpu_model=sun4u; }
-
-#ifdef CONFIG_SUN4
-	if (sparc_cpu_model != sun4) {
-		prom_printf("This kernel is for Sun4 architecture only.\n");
-		prom_halt();
-	}
-#endif
+	if (!strcmp(&cputypval,"sun4 "))
+		sparc_cpu_model = sun4;
+	if (!strcmp(&cputypval,"sun4c"))
+		sparc_cpu_model = sun4c;
+	if (!strcmp(&cputypval,"sun4m"))
+		sparc_cpu_model = sun4m;
+	if (!strcmp(&cputypval,"sun4s"))
+		sparc_cpu_model = sun4m; /* CP-1200 with PROM 2.30 -E */
+	if (!strcmp(&cputypval,"sun4d"))
+		sparc_cpu_model = sun4d;
+	if (!strcmp(&cputypval,"sun4e"))
+		sparc_cpu_model = sun4e;
+	if (!strcmp(&cputypval,"sun4u"))
+		sparc_cpu_model = sun4u;
+
 	printk("ARCH: ");
 	switch(sparc_cpu_model) {
 	case sun4:
@@ -263,7 +265,7 @@ void __init setup_arch(char **cmdline_p)
 	boot_flags_init(*cmdline_p);
 
 	idprom_init();
-	if (ARCH_SUN4C_SUN4)
+	if (ARCH_SUN4C)
 		sun4c_probe_vac();
 	load_mmu();
 
diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c
index b23cea5ca5d..b0dfff84865 100644
--- a/arch/sparc/kernel/sparc_ksyms.c
+++ b/arch/sparc/kernel/sparc_ksyms.c
@@ -38,17 +38,12 @@
 #include <asm/idprom.h>
 #include <asm/head.h>
 #include <asm/smp.h>
-#include <asm/mostek.h>
 #include <asm/ptrace.h>
 #include <asm/uaccess.h>
 #include <asm/checksum.h>
 #ifdef CONFIG_SBUS
-#include <asm/sbus.h>
 #include <asm/dma.h>
 #endif
-#ifdef CONFIG_PCI
-#include <asm/ebus.h>
-#endif
 #include <asm/io-unit.h>
 #include <asm/bug.h>
 
@@ -127,16 +122,11 @@ EXPORT_SYMBOL(phys_cpu_present_map);
 EXPORT_SYMBOL(__udelay);
 EXPORT_SYMBOL(__ndelay);
 EXPORT_SYMBOL(rtc_lock);
-EXPORT_SYMBOL(mostek_lock);
-EXPORT_SYMBOL(mstk48t02_regs);
 #ifdef CONFIG_SUN_AUXIO
 EXPORT_SYMBOL(set_auxio);
 EXPORT_SYMBOL(get_auxio);
 #endif
 EXPORT_SYMBOL(io_remap_pfn_range);
-  /* P3: iounit_xxx may be needed, sun4d users */
-/* EXPORT_SYMBOL(iounit_map_dma_init); */
-/* EXPORT_SYMBOL(iounit_map_dma_page); */
 
 #ifndef CONFIG_SMP
 EXPORT_SYMBOL(BTFIXUP_CALL(___xchg32));
@@ -153,24 +143,9 @@ EXPORT_SYMBOL(BTFIXUP_CALL(mmu_release_scsi_one));
 EXPORT_SYMBOL(BTFIXUP_CALL(pgprot_noncached));
 
 #ifdef CONFIG_SBUS
-EXPORT_SYMBOL(sbus_root);
-EXPORT_SYMBOL(dma_chain);
 EXPORT_SYMBOL(sbus_set_sbus64);
-EXPORT_SYMBOL(sbus_alloc_consistent);
-EXPORT_SYMBOL(sbus_free_consistent);
-EXPORT_SYMBOL(sbus_map_single);
-EXPORT_SYMBOL(sbus_unmap_single);
-EXPORT_SYMBOL(sbus_map_sg);
-EXPORT_SYMBOL(sbus_unmap_sg);
-EXPORT_SYMBOL(sbus_dma_sync_single_for_cpu);
-EXPORT_SYMBOL(sbus_dma_sync_single_for_device);
-EXPORT_SYMBOL(sbus_dma_sync_sg_for_cpu);
-EXPORT_SYMBOL(sbus_dma_sync_sg_for_device);
-EXPORT_SYMBOL(sbus_iounmap);
-EXPORT_SYMBOL(sbus_ioremap);
 #endif
 #ifdef CONFIG_PCI
-EXPORT_SYMBOL(ebus_chain);
 EXPORT_SYMBOL(insb);
 EXPORT_SYMBOL(outsb);
 EXPORT_SYMBOL(insw);
diff --git a/arch/sparc/kernel/sun4c_irq.c b/arch/sparc/kernel/sun4c_irq.c
index 340fc395fe2..5dc8a576948 100644
--- a/arch/sparc/kernel/sun4c_irq.c
+++ b/arch/sparc/kernel/sun4c_irq.c
@@ -18,6 +18,8 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include "irq.h"
 
 #include <asm/ptrace.h>
@@ -31,15 +33,8 @@
 #include <asm/traps.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/sun4paddr.h>
 #include <asm/idprom.h>
 #include <asm/machines.h>
-#include <asm/sbus.h>
-
-#if 0
-static struct resource sun4c_timer_eb = { "sun4c_timer" };
-static struct resource sun4c_intr_eb = { "sun4c_intr" };
-#endif
 
 /*
  * Bit field defines for the interrupt registers on various
@@ -64,19 +59,7 @@ static struct resource sun4c_intr_eb = { "sun4c_intr" };
  *
  * so don't go making it static, like I tried. sigh.
  */
-unsigned char *interrupt_enable = NULL;
-
-static int sun4c_pil_map[] = { 0, 1, 2, 3, 5, 7, 8, 9 };
-
-static unsigned int sun4c_sbint_to_irq(struct sbus_dev *sdev,
-				       unsigned int sbint)
-{
-	if (sbint >= sizeof(sun4c_pil_map)) {
-		printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
-		BUG();
-	}
-	return sun4c_pil_map[sbint];
-}
+unsigned char __iomem *interrupt_enable = NULL;
 
 static void sun4c_disable_irq(unsigned int irq_nr)
 {
@@ -85,7 +68,7 @@ static void sun4c_disable_irq(unsigned int irq_nr)
     
 	local_irq_save(flags);
 	irq_nr &= (NR_IRQS - 1);
-	current_mask = *interrupt_enable;
+	current_mask = sbus_readb(interrupt_enable);
 	switch(irq_nr) {
 	case 1:
 		new_mask = ((current_mask) & (~(SUN4C_INT_E1)));
@@ -103,7 +86,7 @@ static void sun4c_disable_irq(unsigned int irq_nr)
 		local_irq_restore(flags);
 		return;
 	}
-	*interrupt_enable = new_mask;
+	sbus_writeb(new_mask, interrupt_enable);
 	local_irq_restore(flags);
 }
 
@@ -114,7 +97,7 @@ static void sun4c_enable_irq(unsigned int irq_nr)
     
 	local_irq_save(flags);
 	irq_nr &= (NR_IRQS - 1);
-	current_mask = *interrupt_enable;
+	current_mask = sbus_readb(interrupt_enable);
 	switch(irq_nr) {
 	case 1:
 		new_mask = ((current_mask) | SUN4C_INT_E1);
@@ -132,37 +115,22 @@ static void sun4c_enable_irq(unsigned int irq_nr)
 		local_irq_restore(flags);
 		return;
 	}
-	*interrupt_enable = new_mask;
+	sbus_writeb(new_mask, interrupt_enable);
 	local_irq_restore(flags);
 }
 
-#define TIMER_IRQ  	10    /* Also at level 14, but we ignore that one. */
-#define PROFILE_IRQ	14    /* Level14 ticker.. used by OBP for polling */
-
-volatile struct sun4c_timer_info *sun4c_timers;
+struct sun4c_timer_info {
+	u32		l10_count;
+	u32		l10_limit;
+	u32		l14_count;
+	u32		l14_limit;
+};
 
-#ifdef CONFIG_SUN4
-/* This is an ugly hack to work around the
-   current timer code, and make it work with 
-   the sun4/260 intersil 
-   */
-volatile struct sun4c_timer_info sun4_timer;
-#endif
+static struct sun4c_timer_info __iomem *sun4c_timers;
 
 static void sun4c_clear_clock_irq(void)
 {
-	volatile unsigned int clear_intr;
-#ifdef CONFIG_SUN4
-	if (idprom->id_machtype == (SM_SUN4 | SM_4_260)) 
-	  clear_intr = sun4_timer.timer_limit10;
-	else
-#endif
-	clear_intr = sun4c_timers->timer_limit10;
-}
-
-static void sun4c_clear_profile_irq(int cpu)
-{
-	/* Errm.. not sure how to do this.. */
+	sbus_readl(&sun4c_timers->l10_limit);
 }
 
 static void sun4c_load_profile_irq(int cpu, unsigned int limit)
@@ -172,41 +140,48 @@ static void sun4c_load_profile_irq(int cpu, unsigned int limit)
 
 static void __init sun4c_init_timers(irq_handler_t counter_fn)
 {
-	int irq;
+	const struct linux_prom_irqs *irq;
+	struct device_node *dp;
+	const u32 *addr;
+	int err;
+
+	dp = of_find_node_by_name(NULL, "counter-timer");
+	if (!dp) {
+		prom_printf("sun4c_init_timers: Unable to find counter-timer\n");
+		prom_halt();
+	}
 
-	/* Map the Timer chip, this is implemented in hardware inside
-	 * the cache chip on the sun4c.
-	 */
-#ifdef CONFIG_SUN4
-	if (idprom->id_machtype == (SM_SUN4 | SM_4_260))
-		sun4c_timers = &sun4_timer;
-	else
-#endif
-	sun4c_timers = ioremap(SUN_TIMER_PHYSADDR,
-	    sizeof(struct sun4c_timer_info));
+	addr = of_get_property(dp, "address", NULL);
+	if (!addr) {
+		prom_printf("sun4c_init_timers: No address property\n");
+		prom_halt();
+	}
+
+	sun4c_timers = (void __iomem *) (unsigned long) addr[0];
+
+	irq = of_get_property(dp, "intr", NULL);
+	if (!irq) {
+		prom_printf("sun4c_init_timers: No intr property\n");
+		prom_halt();
+	}
 
 	/* Have the level 10 timer tick at 100HZ.  We don't touch the
 	 * level 14 timer limit since we are letting the prom handle
 	 * them until we have a real console driver so L1-A works.
 	 */
-	sun4c_timers->timer_limit10 = (((1000000/HZ) + 1) << 10);
-	master_l10_counter = &sun4c_timers->cur_count10;
-	master_l10_limit = &sun4c_timers->timer_limit10;
+	sbus_writel((((1000000/HZ) + 1) << 10), &sun4c_timers->l10_limit);
 
-	irq = request_irq(TIMER_IRQ,
-			  counter_fn,
+	master_l10_counter = &sun4c_timers->l10_count;
+
+	err = request_irq(irq[0].pri, counter_fn,
 			  (IRQF_DISABLED | SA_STATIC_ALLOC),
 			  "timer", NULL);
-	if (irq) {
-		prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
+	if (err) {
+		prom_printf("sun4c_init_timers: request_irq() fails with %d\n", err);
 		prom_halt();
 	}
     
-#if 0
-	/* This does not work on 4/330 */
-	sun4c_enable_irq(10);
-#endif
-	claim_ticker14(NULL, PROFILE_IRQ, 0);
+	sun4c_disable_irq(irq[1].pri);
 }
 
 #ifdef CONFIG_SMP
@@ -215,41 +190,28 @@ static void sun4c_nop(void) {}
 
 void __init sun4c_init_IRQ(void)
 {
-	struct linux_prom_registers int_regs[2];
-	int ie_node;
+	struct device_node *dp;
+	const u32 *addr;
 
-	if (ARCH_SUN4) {
-		interrupt_enable = (char *)
-		    ioremap(sun4_ie_physaddr, PAGE_SIZE);
-	} else {
-		struct resource phyres;
-
-		ie_node = prom_searchsiblings (prom_getchild(prom_root_node),
-				       	"interrupt-enable");
-		if(ie_node == 0)
-			panic("Cannot find /interrupt-enable node");
+	dp = of_find_node_by_name(NULL, "interrupt-enable");
+	if (!dp) {
+		prom_printf("sun4c_init_IRQ: Unable to find interrupt-enable\n");
+		prom_halt();
+	}
 
-		/* Depending on the "address" property is bad news... */
-		interrupt_enable = NULL;
-		if (prom_getproperty(ie_node, "reg", (char *) int_regs,
-				     sizeof(int_regs)) != -1) {
-			memset(&phyres, 0, sizeof(struct resource));
-			phyres.flags = int_regs[0].which_io;
-			phyres.start = int_regs[0].phys_addr;
-			interrupt_enable = (char *) sbus_ioremap(&phyres, 0,
-			    int_regs[0].reg_size, "sun4c_intr");
-		}
+	addr = of_get_property(dp, "address", NULL);
+	if (!addr) {
+		prom_printf("sun4c_init_IRQ: No address property\n");
+		prom_halt();
 	}
-	if (!interrupt_enable)
-		panic("Cannot map interrupt_enable");
 
-	BTFIXUPSET_CALL(sbint_to_irq, sun4c_sbint_to_irq, BTFIXUPCALL_NORM);
+	interrupt_enable = (void __iomem *) (unsigned long) addr[0];
+
 	BTFIXUPSET_CALL(enable_irq, sun4c_enable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(disable_irq, sun4c_disable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(enable_pil_irq, sun4c_enable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(disable_pil_irq, sun4c_disable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(clear_clock_irq, sun4c_clear_clock_irq, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(clear_profile_irq, sun4c_clear_profile_irq, BTFIXUPCALL_NOP);
 	BTFIXUPSET_CALL(load_profile_irq, sun4c_load_profile_irq, BTFIXUPCALL_NOP);
 	sparc_init_timers = sun4c_init_timers;
 #ifdef CONFIG_SMP
@@ -257,6 +219,6 @@ void __init sun4c_init_IRQ(void)
 	BTFIXUPSET_CALL(clear_cpu_int, sun4c_nop, BTFIXUPCALL_NOP);
 	BTFIXUPSET_CALL(set_irq_udt, sun4c_nop, BTFIXUPCALL_NOP);
 #endif
-	*interrupt_enable = (SUN4C_INT_ENABLE);
+	sbus_writeb(SUN4C_INT_ENABLE, interrupt_enable);
 	/* Cannot enable interrupts until OBP ticker is disabled. */
 }
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index 1290b5998f8..d3cb76ce418 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -19,6 +19,8 @@
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 #include <linux/seq_file.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/ptrace.h>
 #include <asm/processor.h>
@@ -34,7 +36,6 @@
 #include <asm/io.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
-#include <asm/sbus.h>
 #include <asm/sbi.h>
 #include <asm/cacheflush.h>
 #include <asm/irq_regs.h>
@@ -44,16 +45,22 @@
 /* If you trust current SCSI layer to handle different SCSI IRQs, enable this. I don't trust it... -jj */
 /* #define DISTRIBUTE_IRQS */
 
-struct sun4d_timer_regs *sun4d_timers;
+struct sun4d_timer_regs {
+	u32	l10_timer_limit;
+	u32	l10_cur_countx;
+	u32	l10_limit_noclear;
+	u32	ctrl;
+	u32	l10_cur_count;
+};
+
+static struct sun4d_timer_regs __iomem *sun4d_timers;
+
 #define TIMER_IRQ	10
 
 #define MAX_STATIC_ALLOC	4
 extern struct irqaction static_irqaction[MAX_STATIC_ALLOC];
 extern int static_irq_count;
-unsigned char cpu_leds[32];
-#ifdef CONFIG_SMP
 static unsigned char sbus_tid[32];
-#endif
 
 static struct irqaction *irq_action[NR_IRQS];
 extern spinlock_t irq_action_lock;
@@ -72,9 +79,9 @@ static int sbus_to_pil[] = {
 };
 
 static int nsbi;
-#ifdef CONFIG_SMP
+
+/* Exported for sun4d_smp.c */
 DEFINE_SPINLOCK(sun4d_imsk_lock);
-#endif
 
 int show_sun4d_interrupts(struct seq_file *p, void *v)
 {
@@ -257,26 +264,6 @@ void sun4d_handler_irq(int irq, struct pt_regs * regs)
 	set_irq_regs(old_regs);
 }
 
-unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq)
-{
-	int sbusl = pil_to_sbus[irq];
-
-	if (sbusl)
-		return ((sdev->bus->board + 1) << 5) + (sbusl << 2) + sdev->slot;
-	else
-		return irq;
-}
-
-static unsigned int sun4d_sbint_to_irq(struct sbus_dev *sdev,
-				       unsigned int sbint)
-{
-	if (sbint >= sizeof(sbus_to_pil)) {
-		printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
-		BUG();
-	}
-	return sun4d_build_irq(sdev, sbus_to_pil[sbint]);
-}
-
 int sun4d_request_irq(unsigned int irq,
 		irq_handler_t handler,
 		unsigned long irqflags, const char * devname, void *dev_id)
@@ -360,36 +347,28 @@ out:
 
 static void sun4d_disable_irq(unsigned int irq)
 {
-#ifdef CONFIG_SMP
 	int tid = sbus_tid[(irq >> 5) - 1];
 	unsigned long flags;
-#endif	
 	
-	if (irq < NR_IRQS) return;
-#ifdef CONFIG_SMP
+	if (irq < NR_IRQS)
+		return;
+
 	spin_lock_irqsave(&sun4d_imsk_lock, flags);
 	cc_set_imsk_other(tid, cc_get_imsk_other(tid) | (1 << sbus_to_pil[(irq >> 2) & 7]));
 	spin_unlock_irqrestore(&sun4d_imsk_lock, flags);
-#else		
-	cc_set_imsk(cc_get_imsk() | (1 << sbus_to_pil[(irq >> 2) & 7]));
-#endif
 }
 
 static void sun4d_enable_irq(unsigned int irq)
 {
-#ifdef CONFIG_SMP
 	int tid = sbus_tid[(irq >> 5) - 1];
 	unsigned long flags;
-#endif	
 	
-	if (irq < NR_IRQS) return;
-#ifdef CONFIG_SMP
+	if (irq < NR_IRQS)
+		return;
+
 	spin_lock_irqsave(&sun4d_imsk_lock, flags);
 	cc_set_imsk_other(tid, cc_get_imsk_other(tid) & ~(1 << sbus_to_pil[(irq >> 2) & 7]));
 	spin_unlock_irqrestore(&sun4d_imsk_lock, flags);
-#else		
-	cc_set_imsk(cc_get_imsk() & ~(1 << sbus_to_pil[(irq >> 2) & 7]));
-#endif
 }
 
 #ifdef CONFIG_SMP
@@ -409,47 +388,55 @@ static void sun4d_set_udt(int cpu)
 /* Setup IRQ distribution scheme. */
 void __init sun4d_distribute_irqs(void)
 {
+	struct device_node *dp;
+
 #ifdef DISTRIBUTE_IRQS
-	struct sbus_bus *sbus;
-	unsigned long sbus_serving_map;
+	cpumask_t sbus_serving_map;
 
 	sbus_serving_map = cpu_present_map;
-	for_each_sbus(sbus) {
-		if ((sbus->board * 2) == boot_cpu_id && (cpu_present_map & (1 << (sbus->board * 2 + 1))))
-			sbus_tid[sbus->board] = (sbus->board * 2 + 1);
-		else if (cpu_present_map & (1 << (sbus->board * 2)))
-			sbus_tid[sbus->board] = (sbus->board * 2);
-		else if (cpu_present_map & (1 << (sbus->board * 2 + 1)))
-			sbus_tid[sbus->board] = (sbus->board * 2 + 1);
+	for_each_node_by_name(dp, "sbi") {
+		int board = of_getintprop_default(dp, "board#", 0);
+
+		if ((board * 2) == boot_cpu_id && cpu_isset(board * 2 + 1, cpu_present_map))
+			sbus_tid[board] = (board * 2 + 1);
+		else if (cpu_isset(board * 2, cpu_present_map))
+			sbus_tid[board] = (board * 2);
+		else if (cpu_isset(board * 2 + 1, cpu_present_map))
+			sbus_tid[board] = (board * 2 + 1);
 		else
-			sbus_tid[sbus->board] = 0xff;
-		if (sbus_tid[sbus->board] != 0xff)
-			sbus_serving_map &= ~(1 << sbus_tid[sbus->board]);
+			sbus_tid[board] = 0xff;
+		if (sbus_tid[board] != 0xff)
+			cpu_clear(sbus_tid[board], sbus_serving_map);
 	}
-	for_each_sbus(sbus)
-		if (sbus_tid[sbus->board] == 0xff) {
+	for_each_node_by_name(dp, "sbi") {
+		int board = of_getintprop_default(dp, "board#", 0);
+		if (sbus_tid[board] == 0xff) {
 			int i = 31;
 				
-			if (!sbus_serving_map)
+			if (cpus_empty(sbus_serving_map))
 				sbus_serving_map = cpu_present_map;
-			while (!(sbus_serving_map & (1 << i)))
+			while (cpu_isset(i, sbus_serving_map))
 				i--;
-			sbus_tid[sbus->board] = i;
-			sbus_serving_map &= ~(1 << i);
+			sbus_tid[board] = i;
+			cpu_clear(i, sbus_serving_map);
 		}
-	for_each_sbus(sbus) {
-		printk("sbus%d IRQs directed to CPU%d\n", sbus->board, sbus_tid[sbus->board]);
-		set_sbi_tid(sbus->devid, sbus_tid[sbus->board] << 3);
+	}
+	for_each_node_by_name(dp, "sbi") {
+		int devid = of_getintprop_default(dp, "device-id", 0);
+		int board = of_getintprop_default(dp, "board#", 0);
+		printk("sbus%d IRQs directed to CPU%d\n", board, sbus_tid[board]);
+		set_sbi_tid(devid, sbus_tid[board] << 3);
 	}
 #else
-	struct sbus_bus *sbus;
 	int cpuid = cpu_logical_map(1);
 
 	if (cpuid == -1)
 		cpuid = cpu_logical_map(0);
-	for_each_sbus(sbus) {
-		sbus_tid[sbus->board] = cpuid;
-		set_sbi_tid(sbus->devid, cpuid << 3);
+	for_each_node_by_name(dp, "sbi") {
+		int devid = of_getintprop_default(dp, "device-id", 0);
+		int board = of_getintprop_default(dp, "board#", 0);
+		sbus_tid[board] = cpuid;
+		set_sbi_tid(devid, cpuid << 3);
 	}
 	printk("All sbus IRQs directed to CPU%d\n", cpuid);
 #endif
@@ -458,13 +445,7 @@ void __init sun4d_distribute_irqs(void)
  
 static void sun4d_clear_clock_irq(void)
 {
-	volatile unsigned int clear_intr;
-	clear_intr = sun4d_timers->l10_timer_limit;
-}
-
-static void sun4d_clear_profile_irq(int cpu)
-{
-	bw_get_prof_limit(cpu);
+	sbus_readl(&sun4d_timers->l10_timer_limit);
 }
 
 static void sun4d_load_profile_irq(int cpu, unsigned int limit)
@@ -472,98 +453,121 @@ static void sun4d_load_profile_irq(int cpu, unsigned int limit)
 	bw_set_prof_limit(cpu, limit);
 }
 
-static void __init sun4d_init_timers(irq_handler_t counter_fn)
+static void __init sun4d_load_profile_irqs(void)
 {
-	int irq;
-	int cpu;
-	struct resource r;
-	int mid;
+	int cpu = 0, mid;
 
-	/* Map the User Timer registers. */
-	memset(&r, 0, sizeof(r));
+	while (!cpu_find_by_instance(cpu, NULL, &mid)) {
+		sun4d_load_profile_irq(mid >> 3, 0);
+		cpu++;
+	}
+}
+
+static void __init sun4d_fixup_trap_table(void)
+{
 #ifdef CONFIG_SMP
-	r.start = CSR_BASE(boot_cpu_id)+BW_TIMER_LIMIT;
-#else
-	r.start = CSR_BASE(0)+BW_TIMER_LIMIT;
+	unsigned long flags;
+	extern unsigned long lvl14_save[4];
+	struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
+	extern unsigned int real_irq_entry[], smp4d_ticker[];
+	extern unsigned int patchme_maybe_smp_msg[];
+
+	/* Adjust so that we jump directly to smp4d_ticker */
+	lvl14_save[2] += smp4d_ticker - real_irq_entry;
+
+	/* For SMP we use the level 14 ticker, however the bootup code
+	 * has copied the firmware's level 14 vector into the boot cpu's
+	 * trap table, we must fix this now or we get squashed.
+	 */
+	local_irq_save(flags);
+	patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */
+	trap_table->inst_one = lvl14_save[0];
+	trap_table->inst_two = lvl14_save[1];
+	trap_table->inst_three = lvl14_save[2];
+	trap_table->inst_four = lvl14_save[3];
+	local_flush_cache_all();
+	local_irq_restore(flags);
 #endif
-	r.flags = 0xf;
-	sun4d_timers = (struct sun4d_timer_regs *) sbus_ioremap(&r, 0,
-	    PAGE_SIZE, "user timer");
+}
 
-	sun4d_timers->l10_timer_limit =  (((1000000/HZ) + 1) << 10);
-	master_l10_counter = &sun4d_timers->l10_cur_count;
-	master_l10_limit = &sun4d_timers->l10_timer_limit;
+static void __init sun4d_init_timers(irq_handler_t counter_fn)
+{
+	struct device_node *dp;
+	struct resource res;
+	const u32 *reg;
+	int err;
+
+	dp = of_find_node_by_name(NULL, "cpu-unit");
+	if (!dp) {
+		prom_printf("sun4d_init_timers: Unable to find cpu-unit\n");
+		prom_halt();
+	}
 
-	irq = request_irq(TIMER_IRQ,
-			  counter_fn,
-			  (IRQF_DISABLED | SA_STATIC_ALLOC),
-			  "timer", NULL);
-	if (irq) {
-		prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
+	/* Which cpu-unit we use is arbitrary, we can view the bootbus timer
+	 * registers via any cpu's mapping.  The first 'reg' property is the
+	 * bootbus.
+	 */
+	reg = of_get_property(dp, "reg", NULL);
+	if (!reg) {
+		prom_printf("sun4d_init_timers: No reg property\n");
 		prom_halt();
 	}
-	
-	/* Enable user timer free run for CPU 0 in BW */
-	/* bw_set_ctrl(0, bw_get_ctrl(0) | BW_CTRL_USER_TIMER); */
 
-	cpu = 0;
-	while (!cpu_find_by_instance(cpu, NULL, &mid)) {
-		sun4d_load_profile_irq(mid >> 3, 0);
-		cpu++;
+	res.start = reg[1];
+	res.end = reg[2] - 1;
+	res.flags = reg[0] & 0xff;
+	sun4d_timers = of_ioremap(&res, BW_TIMER_LIMIT,
+				  sizeof(struct sun4d_timer_regs), "user timer");
+	if (!sun4d_timers) {
+		prom_printf("sun4d_init_timers: Can't map timer regs\n");
+		prom_halt();
 	}
-		
-#ifdef CONFIG_SMP
-	{
-		unsigned long flags;
-		extern unsigned long lvl14_save[4];
-		struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
-		extern unsigned int real_irq_entry[], smp4d_ticker[];
-		extern unsigned int patchme_maybe_smp_msg[];
-
-		/* Adjust so that we jump directly to smp4d_ticker */
-		lvl14_save[2] += smp4d_ticker - real_irq_entry;
-
-		/* For SMP we use the level 14 ticker, however the bootup code
-		 * has copied the firmware's level 14 vector into the boot cpu's
-		 * trap table, we must fix this now or we get squashed.
-		 */
-		local_irq_save(flags);
-		patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */
-		trap_table->inst_one = lvl14_save[0];
-		trap_table->inst_two = lvl14_save[1];
-		trap_table->inst_three = lvl14_save[2];
-		trap_table->inst_four = lvl14_save[3];
-		local_flush_cache_all();
-		local_irq_restore(flags);
+
+	sbus_writel((((1000000/HZ) + 1) << 10), &sun4d_timers->l10_timer_limit);
+
+	master_l10_counter = &sun4d_timers->l10_cur_count;
+
+	err = request_irq(TIMER_IRQ, counter_fn,
+			  (IRQF_DISABLED | SA_STATIC_ALLOC),
+			  "timer", NULL);
+	if (err) {
+		prom_printf("sun4d_init_timers: request_irq() failed with %d\n", err);
+		prom_halt();
 	}
-#endif
+	sun4d_load_profile_irqs();
+	sun4d_fixup_trap_table();
 }
 
 void __init sun4d_init_sbi_irq(void)
 {
-	struct sbus_bus *sbus;
-	unsigned mask;
+	struct device_node *dp;
+	int target_cpu = 0;
+
+#ifdef CONFIG_SMP
+	target_cpu = boot_cpu_id;
+#endif
 
 	nsbi = 0;
-	for_each_sbus(sbus)
+	for_each_node_by_name(dp, "sbi")
 		nsbi++;
 	sbus_actions = kzalloc (nsbi * 8 * 4 * sizeof(struct sbus_action), GFP_ATOMIC);
 	if (!sbus_actions) {
 		prom_printf("SUN4D: Cannot allocate sbus_actions, halting.\n");
 		prom_halt();
 	}
-	for_each_sbus(sbus) {
-#ifdef CONFIG_SMP	
-		extern unsigned char boot_cpu_id;
-		
-		set_sbi_tid(sbus->devid, boot_cpu_id << 3);
-		sbus_tid[sbus->board] = boot_cpu_id;
-#endif
+	for_each_node_by_name(dp, "sbi") {
+		int devid = of_getintprop_default(dp, "device-id", 0);
+		int board = of_getintprop_default(dp, "board#", 0);
+		unsigned int mask;
+
+		set_sbi_tid(devid, target_cpu << 3);
+		sbus_tid[board] = target_cpu;
+
 		/* Get rid of pending irqs from PROM */
-		mask = acquire_sbi(sbus->devid, 0xffffffff);
+		mask = acquire_sbi(devid, 0xffffffff);
 		if (mask) {
-			printk ("Clearing pending IRQs %08x on SBI %d\n", mask, sbus->board);
-			release_sbi(sbus->devid, mask);
+			printk ("Clearing pending IRQs %08x on SBI %d\n", mask, board);
+			release_sbi(devid, mask);
 		}
 	}
 }
@@ -572,11 +576,9 @@ void __init sun4d_init_IRQ(void)
 {
 	local_irq_disable();
 
-	BTFIXUPSET_CALL(sbint_to_irq, sun4d_sbint_to_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(enable_irq, sun4d_enable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(disable_irq, sun4d_disable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(clear_clock_irq, sun4d_clear_clock_irq, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(clear_profile_irq, sun4d_clear_profile_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(load_profile_irq, sun4d_load_profile_irq, BTFIXUPCALL_NORM);
 	sparc_init_timers = sun4d_init_timers;
 #ifdef CONFIG_SMP
diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index 69596402a50..7a6a5e79592 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -20,6 +20,7 @@
 #include <linux/swap.h>
 #include <linux/profile.h>
 #include <linux/delay.h>
+#include <linux/cpu.h>
 
 #include <asm/ptrace.h>
 #include <asm/atomic.h>
@@ -30,7 +31,6 @@
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/oplib.h>
-#include <asm/sbus.h>
 #include <asm/sbi.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
@@ -72,6 +72,17 @@ static void smp_setup_percpu_timer(void);
 extern void cpu_probe(void);
 extern void sun4d_distribute_irqs(void);
 
+static unsigned char cpu_leds[32];
+
+static inline void show_leds(int cpuid)
+{
+	cpuid &= 0x1e;
+	__asm__ __volatile__ ("stba %0, [%1] %2" : :
+			      "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]),
+			      "r" (ECSR_BASE(cpuid) | BB_LEDS),
+			      "i" (ASI_M_CTL));
+}
+
 void __init smp4d_callin(void)
 {
 	int cpuid = hard_smp4d_processor_id();
@@ -88,6 +99,7 @@ void __init smp4d_callin(void)
 	local_flush_cache_all();
 	local_flush_tlb_all();
 
+	notify_cpu_starting(cpuid);
 	/*
 	 * Unblock the master CPU _only_ when the scheduler state
 	 * of all secondary CPUs will be up-to-date, so after
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index 94e02de960e..f10317179ee 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -20,6 +20,8 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/ptrace.h>
 #include <asm/processor.h>
@@ -35,59 +37,27 @@
 #include <asm/smp.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/sbus.h>
 #include <asm/cacheflush.h>
 
 #include "irq.h"
 
-/* On the sun4m, just like the timers, we have both per-cpu and master
- * interrupt registers.
- */
-
-/* These registers are used for sending/receiving irqs from/to
- * different cpu's.
- */
-struct sun4m_intreg_percpu {
-	unsigned int tbt;        /* Interrupts still pending for this cpu. */
-
-	/* These next two registers are WRITE-ONLY and are only
-	 * "on bit" sensitive, "off bits" written have NO affect.
-	 */
-	unsigned int clear;  /* Clear this cpus irqs here. */
-	unsigned int set;    /* Set this cpus irqs here. */
-	unsigned char space[PAGE_SIZE - 12];
+struct sun4m_irq_percpu {
+	u32		pending;
+	u32		clear;
+	u32		set;
 };
 
-/*
- * djhr
- * Actually the clear and set fields in this struct are misleading..
- * according to the SLAVIO manual (and the same applies for the SEC)
- * the clear field clears bits in the mask which will ENABLE that IRQ
- * the set field sets bits in the mask to DISABLE the IRQ.
- *
- * Also the undirected_xx address in the SLAVIO is defined as
- * RESERVED and write only..
- *
- * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor
- *             sun4m machines, for MP the layout makes more sense.
- */
-struct sun4m_intregs {
-	struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS];
-	unsigned int tbt;                /* IRQ's that are still pending. */
-	unsigned int irqs;               /* Master IRQ bits. */
-
-	/* Again, like the above, two these registers are WRITE-ONLY. */
-	unsigned int clear;              /* Clear master IRQ's by setting bits here. */
-	unsigned int set;                /* Set master IRQ's by setting bits here. */
-
-	/* This register is both READ and WRITE. */
-	unsigned int undirected_target;  /* Which cpu gets undirected irqs. */
+struct sun4m_irq_global {
+	u32		pending;
+	u32		mask;
+	u32		mask_clear;
+	u32		mask_set;
+	u32		interrupt_target;
 };
 
-static unsigned long dummy;
-
-struct sun4m_intregs *sun4m_interrupts;
-unsigned long *irq_rcvreg = &dummy;
+/* Code in entry.S needs to get at these register mappings.  */
+struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS];
+struct sun4m_irq_global __iomem *sun4m_irq_global;
 
 /* Dave Redman (djhr@tadpole.co.uk)
  * The sun4m interrupt registers.
@@ -101,8 +71,9 @@ unsigned long *irq_rcvreg = &dummy;
 
 #define	SUN4M_INT_MASKALL	0x80000000	  /* mask all interrupts */
 #define	SUN4M_INT_MODULE_ERR	0x40000000	  /* module error */
-#define	SUN4M_INT_M2S_WRITE	0x20000000	  /* write buffer error */
-#define	SUN4M_INT_ECC		0x10000000	  /* ecc memory error */
+#define	SUN4M_INT_M2S_WRITE_ERR	0x20000000	  /* write buffer error */
+#define	SUN4M_INT_ECC_ERR	0x10000000	  /* ecc memory error */
+#define	SUN4M_INT_VME_ERR	0x08000000	  /* vme async error */
 #define	SUN4M_INT_FLOPPY	0x00400000	  /* floppy disk */
 #define	SUN4M_INT_MODULE	0x00200000	  /* module interrupt */
 #define	SUN4M_INT_VIDEO		0x00100000	  /* onboard video */
@@ -113,75 +84,126 @@ unsigned long *irq_rcvreg = &dummy;
 #define	SUN4M_INT_SERIAL	0x00008000	  /* serial ports */
 #define	SUN4M_INT_KBDMS		0x00004000	  /* keyboard/mouse */
 #define	SUN4M_INT_SBUSBITS	0x00003F80	  /* sbus int bits */
+#define	SUN4M_INT_VMEBITS	0x0000007F	  /* vme int bits */
+
+#define	SUN4M_INT_ERROR		(SUN4M_INT_MODULE_ERR |    \
+				 SUN4M_INT_M2S_WRITE_ERR | \
+				 SUN4M_INT_ECC_ERR |       \
+				 SUN4M_INT_VME_ERR)
 
 #define SUN4M_INT_SBUS(x)	(1 << (x+7))
 #define SUN4M_INT_VME(x)	(1 << (x))
 
-/* These tables only apply for interrupts greater than 15..
- * 
- * any intr value below 0x10 is considered to be a soft-int
- * this may be useful or it may not.. but that's how I've done it.
- * and it won't clash with what OBP is telling us about devices.
+/* Interrupt levels used by OBP */
+#define	OBP_INT_LEVEL_SOFT	0x10
+#define	OBP_INT_LEVEL_ONBOARD	0x20
+#define	OBP_INT_LEVEL_SBUS	0x30
+#define	OBP_INT_LEVEL_VME	0x40
+
+/* Interrupt level assignment on sun4m:
+ *
+ *	level		source
+ * ------------------------------------------------------------
+ *        1		softint-1
+ *	  2		softint-2, VME/SBUS level 1
+ *	  3		softint-3, VME/SBUS level 2
+ *	  4		softint-4, onboard SCSI
+ *	  5		softint-5, VME/SBUS level 3
+ *	  6		softint-6, onboard ETHERNET
+ *	  7		softint-7, VME/SBUS level 4
+ *	  8		softint-8, onboard VIDEO
+ *	  9		softint-9, VME/SBUS level 5, Module Interrupt
+ *	 10		softint-10, system counter/timer
+ *	 11		softint-11, VME/SBUS level 6, Floppy
+ *	 12		softint-12, Keyboard/Mouse, Serial
+ *	 13		softint-13, VME/SBUS level 7, ISDN Audio
+ *	 14		softint-14, per-processor counter/timer
+ *	 15		softint-15, Asynchronous Errors (broadcast)
  *
- * take an encoded intr value and lookup if it's valid
- * then get the mask bits that match from irq_mask
+ * Each interrupt source is masked distinctly in the sun4m interrupt
+ * registers.  The PIL level alone is therefore ambiguous, since multiple
+ * interrupt sources map to a single PIL.
  *
- * P3: Translation from irq 0x0d to mask 0x2000 is for MrCoffee.
+ * This ambiguity is resolved in the 'intr' property for device nodes
+ * in the OF device tree.  Each 'intr' property entry is composed of
+ * two 32-bit words.  The first word is the IRQ priority value, which
+ * is what we're intersted in.  The second word is the IRQ vector, which
+ * is unused.
+ *
+ * The low 4 bits of the IRQ priority indicate the PIL, and the upper
+ * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled.  0x20
+ * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled.
+ *
+ * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI
+ * whereas a value of 0x33 is SBUS level 2.  Here are some sample
+ * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and
+ * Tadpole S3 GX systems.
+ *
+ * esp: 	0x24	onboard ESP SCSI
+ * le:  	0x26	onboard Lance ETHERNET
+ * p9100:	0x32	SBUS level 1 P9100 video
+ * bpp:  	0x33	SBUS level 2 BPP parallel port device
+ * DBRI:	0x39	SBUS level 5 DBRI ISDN audio
+ * SUNW,leo:	0x39	SBUS level 5 LEO video
+ * pcmcia:	0x3b	SBUS level 6 PCMCIA controller
+ * uctrl:	0x3b	SBUS level 6 UCTRL device
+ * modem:	0x3d	SBUS level 7 MODEM
+ * zs:		0x2c	onboard keyboard/mouse/serial
+ * floppy:	0x2b	onboard Floppy
+ * power:	0x22	onboard power device (XXX unknown mask bit XXX)
  */
-static unsigned char irq_xlate[32] = {
-    /*  0,  1,  2,  3,  4,  5,  6,  7,  8,  9,  a,  b,  c,  d,  e,  f */
-	0,  0,  0,  0,  1,  0,  2,  0,  3,  0,  4,  5,  6, 14,  0,  7,
-	0,  0,  8,  9,  0, 10,  0, 11,  0, 12,  0, 13,  0, 14,  0,  0
-};
 
-static unsigned long irq_mask[] = {
-	0,						  /* illegal index */
-	SUN4M_INT_SCSI,				  	  /*  1 irq 4 */
-	SUN4M_INT_ETHERNET,				  /*  2 irq 6 */
-	SUN4M_INT_VIDEO,				  /*  3 irq 8 */
-	SUN4M_INT_REALTIME,				  /*  4 irq 10 */
-	SUN4M_INT_FLOPPY,				  /*  5 irq 11 */
-	(SUN4M_INT_SERIAL | SUN4M_INT_KBDMS),	  	  /*  6 irq 12 */
-	SUN4M_INT_MODULE_ERR,			  	  /*  7 irq 15 */
-	SUN4M_INT_SBUS(0),				  /*  8 irq 2 */
-	SUN4M_INT_SBUS(1),				  /*  9 irq 3 */
-	SUN4M_INT_SBUS(2),				  /* 10 irq 5 */
-	SUN4M_INT_SBUS(3),				  /* 11 irq 7 */
-	SUN4M_INT_SBUS(4),				  /* 12 irq 9 */
-	SUN4M_INT_SBUS(5),				  /* 13 irq 11 */
-	SUN4M_INT_SBUS(6)				  /* 14 irq 13 */
+static unsigned long irq_mask[0x50] = {
+	/* SMP */
+	0,  SUN4M_SOFT_INT(1),
+	SUN4M_SOFT_INT(2),  SUN4M_SOFT_INT(3),
+	SUN4M_SOFT_INT(4),  SUN4M_SOFT_INT(5),
+	SUN4M_SOFT_INT(6),  SUN4M_SOFT_INT(7),
+	SUN4M_SOFT_INT(8),  SUN4M_SOFT_INT(9),
+	SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
+	SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
+	SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
+	/* soft */
+	0,  SUN4M_SOFT_INT(1),
+	SUN4M_SOFT_INT(2),  SUN4M_SOFT_INT(3),
+	SUN4M_SOFT_INT(4),  SUN4M_SOFT_INT(5),
+	SUN4M_SOFT_INT(6),  SUN4M_SOFT_INT(7),
+	SUN4M_SOFT_INT(8),  SUN4M_SOFT_INT(9),
+	SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
+	SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
+	SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
+	/* onboard */
+	0, 0, 0, 0,
+	SUN4M_INT_SCSI,  0, SUN4M_INT_ETHERNET, 0,
+	SUN4M_INT_VIDEO, SUN4M_INT_MODULE,
+	SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY,
+	(SUN4M_INT_SERIAL | SUN4M_INT_KBDMS),
+	SUN4M_INT_AUDIO, 0, SUN4M_INT_MODULE_ERR,
+	/* sbus */
+	0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1),
+	0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3),
+	0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5),
+	0, SUN4M_INT_SBUS(6), 0, 0,
+	/* vme */
+	0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1),
+	0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3),
+	0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5),
+	0, SUN4M_INT_VME(6), 0, 0
 };
 
-static int sun4m_pil_map[] = { 0, 2, 3, 5, 7, 9, 11, 13 };
-
-static unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev,
-				       unsigned int sbint)
-{
-	if (sbint >= sizeof(sun4m_pil_map)) {
-		printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
-		BUG();
-	}
-	return sun4m_pil_map[sbint] | 0x30;
-}
-
 static unsigned long sun4m_get_irqmask(unsigned int irq)
 {
 	unsigned long mask;
     
-	if (irq > 0x20) {
-		/* OBIO/SBUS interrupts */
-		irq &= 0x1f;
-		mask = irq_mask[irq_xlate[irq]];
-		if (!mask)
-			printk("sun4m_get_irqmask: IRQ%d has no valid mask!\n",irq);
-	} else {
-		/* Soft Interrupts will come here.
-		 * Currently there is no way to trigger them but I'm sure
-		 * something could be cooked up.
-		 */
-		irq &= 0xf;
-		mask = SUN4M_SOFT_INT(irq);
-	}
+	if (irq < 0x50)
+		mask = irq_mask[irq];
+	else
+		mask = 0;
+
+	if (!mask)
+		printk(KERN_ERR "sun4m_get_irqmask: IRQ%d has no valid mask!\n",
+		       irq);
+
 	return mask;
 }
 
@@ -193,9 +215,9 @@ static void sun4m_disable_irq(unsigned int irq_nr)
 	mask = sun4m_get_irqmask(irq_nr);
 	local_irq_save(flags);
 	if (irq_nr > 15)
-		sun4m_interrupts->set = mask;
+		sbus_writel(mask, &sun4m_irq_global->mask_set);
 	else
-		sun4m_interrupts->cpu_intregs[cpu].set = mask;
+		sbus_writel(mask, &sun4m_irq_percpu[cpu]->set);
 	local_irq_restore(flags);    
 }
 
@@ -212,13 +234,13 @@ static void sun4m_enable_irq(unsigned int irq_nr)
 		mask = sun4m_get_irqmask(irq_nr);
 		local_irq_save(flags);
 		if (irq_nr > 15)
-			sun4m_interrupts->clear = mask;
+			sbus_writel(mask, &sun4m_irq_global->mask_clear);
 		else
-			sun4m_interrupts->cpu_intregs[cpu].clear = mask;
+			sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear);
 		local_irq_restore(flags);    
 	} else {
 		local_irq_save(flags);
-		sun4m_interrupts->clear = SUN4M_INT_FLOPPY;
+		sbus_writel(SUN4M_INT_FLOPPY, &sun4m_irq_global->mask_clear);
 		local_irq_restore(flags);
 	}
 }
@@ -236,10 +258,10 @@ static unsigned long cpu_pil_to_imask[16] = {
 /*9*/	SUN4M_INT_SBUS(4) | SUN4M_INT_VME(4) | SUN4M_INT_MODULE_ERR,
 /*10*/	SUN4M_INT_REALTIME,
 /*11*/	SUN4M_INT_SBUS(5) | SUN4M_INT_VME(5) | SUN4M_INT_FLOPPY,
-/*12*/	SUN4M_INT_SERIAL | SUN4M_INT_KBDMS,
-/*13*/	SUN4M_INT_AUDIO,
+/*12*/	SUN4M_INT_SERIAL  | SUN4M_INT_KBDMS,
+/*13*/	SUN4M_INT_SBUS(6) | SUN4M_INT_VME(6) | SUN4M_INT_AUDIO,
 /*14*/	SUN4M_INT_E14,
-/*15*/	0x00000000
+/*15*/	SUN4M_INT_ERROR
 };
 
 /* We assume the caller has disabled local interrupts when these are called,
@@ -247,126 +269,141 @@ static unsigned long cpu_pil_to_imask[16] = {
  */
 static void sun4m_disable_pil_irq(unsigned int pil)
 {
-	sun4m_interrupts->set = cpu_pil_to_imask[pil];
+	sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_set);
 }
 
 static void sun4m_enable_pil_irq(unsigned int pil)
 {
-	sun4m_interrupts->clear = cpu_pil_to_imask[pil];
+	sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_clear);
 }
 
 #ifdef CONFIG_SMP
 static void sun4m_send_ipi(int cpu, int level)
 {
-	unsigned long mask;
-
-	mask = sun4m_get_irqmask(level);
-	sun4m_interrupts->cpu_intregs[cpu].set = mask;
+	unsigned long mask = sun4m_get_irqmask(level);
+	sbus_writel(mask, &sun4m_irq_percpu[cpu]->set);
 }
 
 static void sun4m_clear_ipi(int cpu, int level)
 {
-	unsigned long mask;
-
-	mask = sun4m_get_irqmask(level);
-	sun4m_interrupts->cpu_intregs[cpu].clear = mask;
+	unsigned long mask = sun4m_get_irqmask(level);
+	sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear);
 }
 
 static void sun4m_set_udt(int cpu)
 {
-	sun4m_interrupts->undirected_target = cpu;
+	sbus_writel(cpu, &sun4m_irq_global->interrupt_target);
 }
 #endif
 
-#define OBIO_INTR	0x20
-#define TIMER_IRQ  	(OBIO_INTR | 10)
-#define PROFILE_IRQ	(OBIO_INTR | 14)
+struct sun4m_timer_percpu {
+	u32		l14_limit;
+	u32		l14_count;
+	u32		l14_limit_noclear;
+	u32		user_timer_start_stop;
+};
+
+static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS];
+
+struct sun4m_timer_global {
+	u32		l10_limit;
+	u32		l10_count;
+	u32		l10_limit_noclear;
+	u32		reserved;
+	u32		timer_config;
+};
+
+static struct sun4m_timer_global __iomem *timers_global;
+
+#define TIMER_IRQ  	(OBP_INT_LEVEL_ONBOARD | 10)
 
-static struct sun4m_timer_regs *sun4m_timers;
 unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10);
 
 static void sun4m_clear_clock_irq(void)
 {
-	volatile unsigned int clear_intr;
-	clear_intr = sun4m_timers->l10_timer_limit;
+	sbus_readl(&timers_global->l10_limit);
 }
 
-static void sun4m_clear_profile_irq(int cpu)
+void sun4m_nmi(struct pt_regs *regs)
 {
-	volatile unsigned int clear;
-    
-	clear = sun4m_timers->cpu_timers[cpu].l14_timer_limit;
+	unsigned long afsr, afar, si;
+
+	printk(KERN_ERR "Aieee: sun4m NMI received!\n");
+	/* XXX HyperSparc hack XXX */
+	__asm__ __volatile__("mov 0x500, %%g1\n\t"
+			     "lda [%%g1] 0x4, %0\n\t"
+			     "mov 0x600, %%g1\n\t"
+			     "lda [%%g1] 0x4, %1\n\t" :
+			     "=r" (afsr), "=r" (afar));
+	printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar);
+	si = sbus_readl(&sun4m_irq_global->pending);
+	printk(KERN_ERR "si=%08lx\n", si);
+	if (si & SUN4M_INT_MODULE_ERR)
+		printk(KERN_ERR "Module async error\n");
+	if (si & SUN4M_INT_M2S_WRITE_ERR)
+		printk(KERN_ERR "MBus/SBus async error\n");
+	if (si & SUN4M_INT_ECC_ERR)
+		printk(KERN_ERR "ECC memory error\n");
+	if (si & SUN4M_INT_VME_ERR)
+		printk(KERN_ERR "VME async error\n");
+	printk(KERN_ERR "you lose buddy boy...\n");
+	show_regs(regs);
+	prom_halt();
+}
+
+/* Exported for sun4m_smp.c */
+void sun4m_clear_profile_irq(int cpu)
+{
+	sbus_readl(&timers_percpu[cpu]->l14_limit);
 }
 
 static void sun4m_load_profile_irq(int cpu, unsigned int limit)
 {
-	sun4m_timers->cpu_timers[cpu].l14_timer_limit = limit;
+	sbus_writel(limit, &timers_percpu[cpu]->l14_limit);
 }
 
 static void __init sun4m_init_timers(irq_handler_t counter_fn)
 {
-	int reg_count, irq, cpu;
-	struct linux_prom_registers cnt_regs[PROMREG_MAX];
-	int obio_node, cnt_node;
-	struct resource r;
-
-	cnt_node = 0;
-	if((obio_node =
-	    prom_searchsiblings (prom_getchild(prom_root_node), "obio")) == 0 ||
-	   (obio_node = prom_getchild (obio_node)) == 0 ||
-	   (cnt_node = prom_searchsiblings (obio_node, "counter")) == 0) {
-		prom_printf("Cannot find /obio/counter node\n");
-		prom_halt();
+	struct device_node *dp = of_find_node_by_name(NULL, "counter");
+	int i, err, len, num_cpu_timers;
+	const u32 *addr;
+
+	if (!dp) {
+		printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n");
+		return;
 	}
-	reg_count = prom_getproperty(cnt_node, "reg",
-				     (void *) cnt_regs, sizeof(cnt_regs));
-	reg_count = (reg_count/sizeof(struct linux_prom_registers));
-    
-	/* Apply the obio ranges to the timer registers. */
-	prom_apply_obio_ranges(cnt_regs, reg_count);
-    
-	cnt_regs[4].phys_addr = cnt_regs[reg_count-1].phys_addr;
-	cnt_regs[4].reg_size = cnt_regs[reg_count-1].reg_size;
-	cnt_regs[4].which_io = cnt_regs[reg_count-1].which_io;
-	for(obio_node = 1; obio_node < 4; obio_node++) {
-		cnt_regs[obio_node].phys_addr =
-			cnt_regs[obio_node-1].phys_addr + PAGE_SIZE;
-		cnt_regs[obio_node].reg_size = cnt_regs[obio_node-1].reg_size;
-		cnt_regs[obio_node].which_io = cnt_regs[obio_node-1].which_io;
+
+	addr = of_get_property(dp, "address", &len);
+	if (!addr) {
+		printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n");
+		return;
 	}
 
-	memset((char*)&r, 0, sizeof(struct resource));
-	/* Map the per-cpu Counter registers. */
-	r.flags = cnt_regs[0].which_io;
-	r.start = cnt_regs[0].phys_addr;
-	sun4m_timers = (struct sun4m_timer_regs *) sbus_ioremap(&r, 0,
-	    PAGE_SIZE*SUN4M_NCPUS, "sun4m_cpu_cnt");
-	/* Map the system Counter register. */
-	/* XXX Here we expect consequent calls to yeld adjusent maps. */
-	r.flags = cnt_regs[4].which_io;
-	r.start = cnt_regs[4].phys_addr;
-	sbus_ioremap(&r, 0, cnt_regs[4].reg_size, "sun4m_sys_cnt");
-
-	sun4m_timers->l10_timer_limit =  (((1000000/HZ) + 1) << 10);
-	master_l10_counter = &sun4m_timers->l10_cur_count;
-	master_l10_limit = &sun4m_timers->l10_timer_limit;
-
-	irq = request_irq(TIMER_IRQ,
-			  counter_fn,
-			  (IRQF_DISABLED | SA_STATIC_ALLOC),
-			  "timer", NULL);
-	if (irq) {
-		prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
-		prom_halt();
+	num_cpu_timers = (len / sizeof(u32)) - 1;
+	for (i = 0; i < num_cpu_timers; i++) {
+		timers_percpu[i] = (void __iomem *)
+			(unsigned long) addr[i];
 	}
-   
-	if (!cpu_find_by_instance(1, NULL, NULL)) {
-		for(cpu = 0; cpu < 4; cpu++)
-			sun4m_timers->cpu_timers[cpu].l14_timer_limit = 0;
-		sun4m_interrupts->set = SUN4M_INT_E14;
-	} else {
-		sun4m_timers->cpu_timers[0].l14_timer_limit = 0;
+	timers_global = (void __iomem *)
+		(unsigned long) addr[num_cpu_timers];
+
+	sbus_writel((((1000000/HZ) + 1) << 10), &timers_global->l10_limit);
+
+	master_l10_counter = &timers_global->l10_count;
+
+	err = request_irq(TIMER_IRQ, counter_fn,
+			  (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL);
+	if (err) {
+		printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n",
+			err);
+		return;
 	}
+
+	for (i = 0; i < num_cpu_timers; i++)
+		sbus_writel(0, &timers_percpu[i]->l14_limit);
+	if (num_cpu_timers == 4)
+		sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set);
+
 #ifdef CONFIG_SMP
 	{
 		unsigned long flags;
@@ -390,70 +427,43 @@ static void __init sun4m_init_timers(irq_handler_t counter_fn)
 
 void __init sun4m_init_IRQ(void)
 {
-	int ie_node,i;
-	struct linux_prom_registers int_regs[PROMREG_MAX];
-	int num_regs;
-	struct resource r;
-	int mid;
-    
-	local_irq_disable();
-	if((ie_node = prom_searchsiblings(prom_getchild(prom_root_node), "obio")) == 0 ||
-	   (ie_node = prom_getchild (ie_node)) == 0 ||
-	   (ie_node = prom_searchsiblings (ie_node, "interrupt")) == 0) {
-		prom_printf("Cannot find /obio/interrupt node\n");
-		prom_halt();
+	struct device_node *dp = of_find_node_by_name(NULL, "interrupt");
+	int len, i, mid, num_cpu_iregs;
+	const u32 *addr;
+
+	if (!dp) {
+		printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n");
+		return;
 	}
-	num_regs = prom_getproperty(ie_node, "reg", (char *) int_regs,
-				    sizeof(int_regs));
-	num_regs = (num_regs/sizeof(struct linux_prom_registers));
-    
-	/* Apply the obio ranges to these registers. */
-	prom_apply_obio_ranges(int_regs, num_regs);
-    
-	int_regs[4].phys_addr = int_regs[num_regs-1].phys_addr;
-	int_regs[4].reg_size = int_regs[num_regs-1].reg_size;
-	int_regs[4].which_io = int_regs[num_regs-1].which_io;
-	for(ie_node = 1; ie_node < 4; ie_node++) {
-		int_regs[ie_node].phys_addr = int_regs[ie_node-1].phys_addr + PAGE_SIZE;
-		int_regs[ie_node].reg_size = int_regs[ie_node-1].reg_size;
-		int_regs[ie_node].which_io = int_regs[ie_node-1].which_io;
+
+	addr = of_get_property(dp, "address", &len);
+	if (!addr) {
+		printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n");
+		return;
 	}
 
-	memset((char *)&r, 0, sizeof(struct resource));
-	/* Map the interrupt registers for all possible cpus. */
-	r.flags = int_regs[0].which_io;
-	r.start = int_regs[0].phys_addr;
-	sun4m_interrupts = (struct sun4m_intregs *) sbus_ioremap(&r, 0,
-	    PAGE_SIZE*SUN4M_NCPUS, "interrupts_percpu");
+	num_cpu_iregs = (len / sizeof(u32)) - 1;
+	for (i = 0; i < num_cpu_iregs; i++) {
+		sun4m_irq_percpu[i] = (void __iomem *)
+			(unsigned long) addr[i];
+	}
+	sun4m_irq_global = (void __iomem *)
+		(unsigned long) addr[num_cpu_iregs];
 
-	/* Map the system interrupt control registers. */
-	r.flags = int_regs[4].which_io;
-	r.start = int_regs[4].phys_addr;
-	sbus_ioremap(&r, 0, int_regs[4].reg_size, "interrupts_system");
+	local_irq_disable();
 
-	sun4m_interrupts->set = ~SUN4M_INT_MASKALL;
+	sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set);
 	for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
-		sun4m_interrupts->cpu_intregs[mid].clear = ~0x17fff;
-
-	if (!cpu_find_by_instance(1, NULL, NULL)) {
-		/* system wide interrupts go to cpu 0, this should always
-		 * be safe because it is guaranteed to be fitted or OBP doesn't
-		 * come up
-		 *
-		 * Not sure, but writing here on SLAVIO systems may puke
-		 * so I don't do it unless there is more than 1 cpu.
-		 */
-		irq_rcvreg = (unsigned long *)
-				&sun4m_interrupts->undirected_target;
-		sun4m_interrupts->undirected_target = 0;
-	}
-	BTFIXUPSET_CALL(sbint_to_irq, sun4m_sbint_to_irq, BTFIXUPCALL_NORM);
+		sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear);
+
+	if (num_cpu_iregs == 4)
+		sbus_writel(0, &sun4m_irq_global->interrupt_target);
+
 	BTFIXUPSET_CALL(enable_irq, sun4m_enable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(disable_irq, sun4m_disable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(enable_pil_irq, sun4m_enable_pil_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(disable_pil_irq, sun4m_disable_pil_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(clear_profile_irq, sun4m_clear_profile_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM);
 	sparc_init_timers = sun4m_init_timers;
 #ifdef CONFIG_SMP
@@ -461,5 +471,6 @@ void __init sun4m_init_IRQ(void)
 	BTFIXUPSET_CALL(clear_cpu_int, sun4m_clear_ipi, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(set_irq_udt, sun4m_set_udt, BTFIXUPCALL_NORM);
 #endif
+
 	/* Cannot enable interrupts until OBP ticker is disabled. */
 }
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index a14a76ac7f3..5fc386d08c4 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -17,6 +17,7 @@
 #include <linux/swap.h>
 #include <linux/profile.h>
 #include <linux/delay.h>
+#include <linux/cpu.h>
 
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
@@ -71,6 +72,8 @@ void __cpuinit smp4m_callin(void)
 	local_flush_cache_all();
 	local_flush_tlb_all();
 
+	notify_cpu_starting(cpuid);
+
 	/* Get our local ticker going. */
 	smp_setup_percpu_timer();
 
@@ -313,6 +316,8 @@ void smp4m_cross_call_irq(void)
 	ccall_info.processors_out[i] = 1;
 }
 
+extern void sun4m_clear_profile_irq(int cpu);
+
 void smp4m_percpu_timer_interrupt(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs;
@@ -320,7 +325,7 @@ void smp4m_percpu_timer_interrupt(struct pt_regs *regs)
 
 	old_regs = set_irq_regs(regs);
 
-	clear_profile_irq(cpu);
+	sun4m_clear_profile_irq(cpu);
 
 	profile_tick(CPU_PROFILING);
 
diff --git a/arch/sparc/kernel/sun4setup.c b/arch/sparc/kernel/sun4setup.c
deleted file mode 100644
index 229a52f55f1..00000000000
--- a/arch/sparc/kernel/sun4setup.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/* sun4setup.c: Setup the hardware address of various items in the sun4
- * 		architecture. Called from idprom_init
- *
- * Copyright (C) 1998 Chris G. Davis (cdavis@cois.on.ca)
- */
-
-#include <asm/page.h>
-#include <asm/oplib.h>
-#include <asm/idprom.h>
-#include <asm/sun4paddr.h>
-#include <asm/machines.h>
-
-int sun4_memreg_physaddr;
-int sun4_ie_physaddr;
-int sun4_clock_physaddr;
-int sun4_timer_physaddr;
-int sun4_eth_physaddr;
-int sun4_si_physaddr;
-int sun4_bwtwo_physaddr;
-int sun4_zs0_physaddr;
-int sun4_zs1_physaddr;
-int sun4_dma_physaddr;
-int sun4_esp_physaddr;
-int sun4_ie_physaddr; 
-
-void __init sun4setup(void)
-{
-	printk("Sun4 Hardware Setup v1.0 18/May/98 Chris Davis (cdavis@cois.on.ca). ");
-	/*
-	  setup standard sun4 info
-	  */
-	sun4_ie_physaddr=SUN4_IE_PHYSADDR;
-
-	/*
-	  setup model specific info
-	  */
-	switch(idprom->id_machtype) {
-		case (SM_SUN4 | SM_4_260 ):
-			printk("Setup for a SUN4/260\n");
-			sun4_memreg_physaddr=SUN4_200_MEMREG_PHYSADDR;
-			sun4_clock_physaddr=SUN4_200_CLOCK_PHYSADDR;
-			sun4_timer_physaddr=SUN4_UNUSED_PHYSADDR;
-			sun4_eth_physaddr=SUN4_200_ETH_PHYSADDR;
-			sun4_si_physaddr=SUN4_200_SI_PHYSADDR;
-			sun4_bwtwo_physaddr=SUN4_200_BWTWO_PHYSADDR;
-			sun4_dma_physaddr=SUN4_UNUSED_PHYSADDR;
-			sun4_esp_physaddr=SUN4_UNUSED_PHYSADDR;
-			break;
-		case (SM_SUN4 | SM_4_330 ):
-			printk("Setup for a SUN4/330\n");
-			sun4_memreg_physaddr=SUN4_300_MEMREG_PHYSADDR;
-			sun4_clock_physaddr=SUN4_300_CLOCK_PHYSADDR;
-			sun4_timer_physaddr=SUN4_300_TIMER_PHYSADDR;
-			sun4_eth_physaddr=SUN4_300_ETH_PHYSADDR;
-			sun4_si_physaddr=SUN4_UNUSED_PHYSADDR;
-			sun4_bwtwo_physaddr=SUN4_300_BWTWO_PHYSADDR;
-			sun4_dma_physaddr=SUN4_300_DMA_PHYSADDR;
-			sun4_esp_physaddr=SUN4_300_ESP_PHYSADDR;
-			break;
-		case (SM_SUN4 | SM_4_470 ):
-			printk("Setup for a SUN4/470\n");
-			sun4_memreg_physaddr=SUN4_400_MEMREG_PHYSADDR;
-			sun4_clock_physaddr=SUN4_400_CLOCK_PHYSADDR;
-			sun4_timer_physaddr=SUN4_400_TIMER_PHYSADDR;
-			sun4_eth_physaddr=SUN4_400_ETH_PHYSADDR;
-			sun4_si_physaddr=SUN4_UNUSED_PHYSADDR;
-			sun4_bwtwo_physaddr=SUN4_400_BWTWO_PHYSADDR;
-			sun4_dma_physaddr=SUN4_400_DMA_PHYSADDR;
-			sun4_esp_physaddr=SUN4_400_ESP_PHYSADDR;
-			break;
-		default:
-			;
-	}
-}
-
diff --git a/arch/sparc/kernel/sys_sparc.c b/arch/sparc/kernel/sys_sparc.c
index 4d73421559c..03035c852a4 100644
--- a/arch/sparc/kernel/sys_sparc.c
+++ b/arch/sparc/kernel/sys_sparc.c
@@ -53,7 +53,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi
 	/* See asm-sparc/uaccess.h */
 	if (len > TASK_SIZE - PAGE_SIZE)
 		return -ENOMEM;
-	if (ARCH_SUN4C_SUN4 && len > 0x20000000)
+	if (ARCH_SUN4C && len > 0x20000000)
 		return -ENOMEM;
 	if (!addr)
 		addr = TASK_UNMAPPED_BASE;
@@ -65,7 +65,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi
 
 	for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) {
 		/* At this point:  (!vmm || addr < vmm->vm_end). */
-		if (ARCH_SUN4C_SUN4 && addr < 0xe0000000 && 0x20000000 - len < addr) {
+		if (ARCH_SUN4C && addr < 0xe0000000 && 0x20000000 - len < addr) {
 			addr = PAGE_OFFSET;
 			vmm = find_vma(current->mm, PAGE_OFFSET);
 		}
@@ -81,7 +81,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi
 
 asmlinkage unsigned long sparc_brk(unsigned long brk)
 {
-	if(ARCH_SUN4C_SUN4) {
+	if(ARCH_SUN4C) {
 		if ((brk & 0xe0000000) != (current->mm->brk & 0xe0000000))
 			return current->mm->brk;
 	}
@@ -221,7 +221,7 @@ out:
 
 int sparc_mmap_check(unsigned long addr, unsigned long len)
 {
-	if (ARCH_SUN4C_SUN4 &&
+	if (ARCH_SUN4C &&
 	    (len > 0x20000000 ||
 	     (addr < 0xe0000000 && addr + len > 0x20000000)))
 		return -EINVAL;
diff --git a/arch/sparc/kernel/tick14.c b/arch/sparc/kernel/tick14.c
index 707bfda8657..138bbf5f872 100644
--- a/arch/sparc/kernel/tick14.c
+++ b/arch/sparc/kernel/tick14.c
@@ -1,31 +1,12 @@
 /* tick14.c
- * linux/arch/sparc/kernel/tick14.c
  *
  * Copyright (C) 1996 David Redman (djhr@tadpole.co.uk)
  *
  * This file handles the Sparc specific level14 ticker
  * This is really useful for profiling OBP uses it for keyboard
  * aborts and other stuff.
- *
- *
  */
-#include <linux/errno.h>
-#include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/timex.h>
-#include <linux/interrupt.h>
-
-#include <asm/oplib.h>
-#include <asm/timer.h>
-#include <asm/mostek.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include "irq.h"
 
 extern unsigned long lvl14_save[5];
 static unsigned long *linux_lvl14 = NULL;
@@ -56,31 +37,3 @@ void install_obp_ticker(void)
 	linux_lvl14[2] =  obp_lvl14[2];
 	linux_lvl14[3] =  obp_lvl14[3]; 
 }
-
-void claim_ticker14(irq_handler_t handler,
-		    int irq_nr, unsigned int timeout )
-{
-	int cpu = smp_processor_id();
-
-	/* first we copy the obp handler instructions
-	 */
-	__disable_irq(irq_nr);
-	if (!handler)
-		return;
-    
-	linux_lvl14 = (unsigned long *)lvl14_save[4];
-	obp_lvl14[0] = linux_lvl14[0];
-	obp_lvl14[1] = linux_lvl14[1];
-	obp_lvl14[2] = linux_lvl14[2];
-	obp_lvl14[3] = linux_lvl14[3];
-
-	if (!request_irq(irq_nr,
-			 handler,
-			 (IRQF_DISABLED | SA_STATIC_ALLOC),
-			 "counter14",
-			 NULL)) {
-		install_linux_ticker();
-		load_profile_irq(cpu, timeout);
-		__enable_irq(irq_nr);
-	}
-}
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index 0762f5db192..62c1d94cb43 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -23,22 +23,24 @@
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/time.h>
+#include <linux/rtc.h>
+#include <linux/rtc/m48t59.h>
 #include <linux/timex.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
 #include <linux/profile.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/platform_device.h>
 
 #include <asm/oplib.h>
 #include <asm/timer.h>
-#include <asm/mostek.h>
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/idprom.h>
 #include <asm/machines.h>
-#include <asm/sun4paddr.h>
 #include <asm/page.h>
 #include <asm/pcic.h>
 #include <asm/irq_regs.h>
@@ -46,34 +48,9 @@
 #include "irq.h"
 
 DEFINE_SPINLOCK(rtc_lock);
-static enum sparc_clock_type sp_clock_typ;
-DEFINE_SPINLOCK(mostek_lock);
-void __iomem *mstk48t02_regs = NULL;
-static struct mostek48t08 __iomem *mstk48t08_regs = NULL;
 static int set_rtc_mmss(unsigned long);
 static int sbus_do_settimeofday(struct timespec *tv);
 
-#ifdef CONFIG_SUN4
-struct intersil *intersil_clock;
-#define intersil_cmd(intersil_reg, intsil_cmd) intersil_reg->int_cmd_reg = \
-	(intsil_cmd)
-
-#define intersil_intr(intersil_reg, intsil_cmd) intersil_reg->int_intr_reg = \
-	(intsil_cmd)
-
-#define intersil_start(intersil_reg) intersil_cmd(intersil_reg, \
-	( INTERSIL_START | INTERSIL_32K | INTERSIL_NORMAL | INTERSIL_24H |\
-	  INTERSIL_INTR_ENABLE))
-
-#define intersil_stop(intersil_reg) intersil_cmd(intersil_reg, \
-	( INTERSIL_STOP | INTERSIL_32K | INTERSIL_NORMAL | INTERSIL_24H |\
-	  INTERSIL_INTR_ENABLE))
-
-#define intersil_read_intr(intersil_reg, towhere) towhere = \
-	intersil_reg->int_intr_reg
-
-#endif
-
 unsigned long profile_pc(struct pt_regs *regs)
 {
 	extern char __copy_user_begin[], __copy_user_end[];
@@ -96,7 +73,6 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 
 __volatile__ unsigned int *master_l10_counter;
-__volatile__ unsigned int *master_l10_limit;
 
 /*
  * timer_interrupt() needs to keep up the real-time clock,
@@ -116,15 +92,7 @@ static irqreturn_t timer_interrupt(int dummy, void *dev_id)
 
 	/* Protect counter clear so that do_gettimeoffset works */
 	write_seqlock(&xtime_lock);
-#ifdef CONFIG_SUN4
-	if((idprom->id_machtype == (SM_SUN4 | SM_4_260)) ||
-	   (idprom->id_machtype == (SM_SUN4 | SM_4_110))) {
-		int temp;
-        	intersil_read_intr(intersil_clock, temp);
-		/* re-enable the irq */
-		enable_pil_irq(10);
-	}
-#endif
+
 	clear_clock_irq();
 
 	do_timer(1);
@@ -147,157 +115,56 @@ static irqreturn_t timer_interrupt(int dummy, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/* Kick start a stopped clock (procedure from the Sun NVRAM/hostid FAQ). */
-static void __devinit kick_start_clock(void)
+static unsigned char mostek_read_byte(struct device *dev, u32 ofs)
 {
-	struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs;
-	unsigned char sec;
-	int i, count;
-
-	prom_printf("CLOCK: Clock was stopped. Kick start ");
-
-	spin_lock_irq(&mostek_lock);
-
-	/* Turn on the kick start bit to start the oscillator. */
-	regs->creg |= MSTK_CREG_WRITE;
-	regs->sec &= ~MSTK_STOP;
-	regs->hour |= MSTK_KICK_START;
-	regs->creg &= ~MSTK_CREG_WRITE;
-
-	spin_unlock_irq(&mostek_lock);
-
-	/* Delay to allow the clock oscillator to start. */
-	sec = MSTK_REG_SEC(regs);
-	for (i = 0; i < 3; i++) {
-		while (sec == MSTK_REG_SEC(regs))
-			for (count = 0; count < 100000; count++)
-				/* nothing */ ;
-		prom_printf(".");
-		sec = regs->sec;
-	}
-	prom_printf("\n");
-
-	spin_lock_irq(&mostek_lock);
-
-	/* Turn off kick start and set a "valid" time and date. */
-	regs->creg |= MSTK_CREG_WRITE;
-	regs->hour &= ~MSTK_KICK_START;
-	MSTK_SET_REG_SEC(regs,0);
-	MSTK_SET_REG_MIN(regs,0);
-	MSTK_SET_REG_HOUR(regs,0);
-	MSTK_SET_REG_DOW(regs,5);
-	MSTK_SET_REG_DOM(regs,1);
-	MSTK_SET_REG_MONTH(regs,8);
-	MSTK_SET_REG_YEAR(regs,1996 - MSTK_YEAR_ZERO);
-	regs->creg &= ~MSTK_CREG_WRITE;
-
-	spin_unlock_irq(&mostek_lock);
-
-	/* Ensure the kick start bit is off. If it isn't, turn it off. */
-	while (regs->hour & MSTK_KICK_START) {
-		prom_printf("CLOCK: Kick start still on!\n");
-
-		spin_lock_irq(&mostek_lock);
-		regs->creg |= MSTK_CREG_WRITE;
-		regs->hour &= ~MSTK_KICK_START;
-		regs->creg &= ~MSTK_CREG_WRITE;
-		spin_unlock_irq(&mostek_lock);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_plat_data *pdata = pdev->dev.platform_data;
+	void __iomem *regs = pdata->ioaddr;
+	unsigned char val = readb(regs + ofs);
+
+	/* the year 0 is 1968 */
+	if (ofs == pdata->offset + M48T59_YEAR) {
+		val += 0x68;
+		if ((val & 0xf) > 9)
+			val += 6;
 	}
-
-	prom_printf("CLOCK: Kick start procedure successful.\n");
-}
-
-/* Return nonzero if the clock chip battery is low. */
-static inline int has_low_battery(void)
-{
-	struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs;
-	unsigned char data1, data2;
-
-	spin_lock_irq(&mostek_lock);
-	data1 = regs->eeprom[0];	/* Read some data. */
-	regs->eeprom[0] = ~data1;	/* Write back the complement. */
-	data2 = regs->eeprom[0];	/* Read back the complement. */
-	regs->eeprom[0] = data1;	/* Restore the original value. */
-	spin_unlock_irq(&mostek_lock);
-
-	return (data1 == data2);	/* Was the write blocked? */
+	return val;
 }
 
-static void __devinit mostek_set_system_time(void)
+static void mostek_write_byte(struct device *dev, u32 ofs, u8 val)
 {
-	unsigned int year, mon, day, hour, min, sec;
-	struct mostek48t02 *mregs;
-
-	mregs = (struct mostek48t02 *)mstk48t02_regs;
-	if(!mregs) {
-		prom_printf("Something wrong, clock regs not mapped yet.\n");
-		prom_halt();
-	}		
-	spin_lock_irq(&mostek_lock);
-	mregs->creg |= MSTK_CREG_READ;
-	sec = MSTK_REG_SEC(mregs);
-	min = MSTK_REG_MIN(mregs);
-	hour = MSTK_REG_HOUR(mregs);
-	day = MSTK_REG_DOM(mregs);
-	mon = MSTK_REG_MONTH(mregs);
-	year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
-        set_normalized_timespec(&wall_to_monotonic,
-                                -xtime.tv_sec, -xtime.tv_nsec);
-	mregs->creg &= ~MSTK_CREG_READ;
-	spin_unlock_irq(&mostek_lock);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_plat_data *pdata = pdev->dev.platform_data;
+	void __iomem *regs = pdata->ioaddr;
+
+	if (ofs == pdata->offset + M48T59_YEAR) {
+		if (val < 0x68)
+			val += 0x32;
+		else
+			val -= 0x68;
+		if ((val & 0xf) > 9)
+			val += 6;
+		if ((val & 0xf0) > 0x9A)
+			val += 0x60;
+	}
+	writeb(val, regs + ofs);
 }
 
-/* Probe for the real time clock chip on Sun4 */
-static inline void sun4_clock_probe(void)
-{
-#ifdef CONFIG_SUN4
-	int temp;
-	struct resource r;
-
-	memset(&r, 0, sizeof(r));
-	if( idprom->id_machtype == (SM_SUN4 | SM_4_330) ) {
-		sp_clock_typ = MSTK48T02;
-		r.start = sun4_clock_physaddr;
-		mstk48t02_regs = sbus_ioremap(&r, 0,
-				       sizeof(struct mostek48t02), NULL);
-		mstk48t08_regs = NULL;  /* To catch weirdness */
-		intersil_clock = NULL;  /* just in case */
-
-		/* Kick start the clock if it is completely stopped. */
-		if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP)
-			kick_start_clock();
-	} else if( idprom->id_machtype == (SM_SUN4 | SM_4_260)) {
-		/* intersil setup code */
-		printk("Clock: INTERSIL at %8x ",sun4_clock_physaddr);
-		sp_clock_typ = INTERSIL;
-		r.start = sun4_clock_physaddr;
-		intersil_clock = (struct intersil *) 
-		    sbus_ioremap(&r, 0, sizeof(*intersil_clock), "intersil");
-		mstk48t02_regs = 0;  /* just be sure */
-		mstk48t08_regs = NULL;  /* ditto */
-		/* initialise the clock */
-
-		intersil_intr(intersil_clock,INTERSIL_INT_100HZ);
-
-		intersil_start(intersil_clock);
-
-		intersil_read_intr(intersil_clock, temp);
-                while (!(temp & 0x80))
-                        intersil_read_intr(intersil_clock, temp);
-
-                intersil_read_intr(intersil_clock, temp);
-                while (!(temp & 0x80))
-                        intersil_read_intr(intersil_clock, temp);
-
-		intersil_stop(intersil_clock);
+static struct m48t59_plat_data m48t59_data = {
+	.read_byte = mostek_read_byte,
+	.write_byte = mostek_write_byte,
+};
 
-	}
-#endif
-}
+/* resource is set at runtime */
+static struct platform_device m48t59_rtc = {
+	.name		= "rtc-m48t59",
+	.id		= 0,
+	.num_resources	= 1,
+	.dev	= {
+		.platform_data = &m48t59_data,
+	},
+};
 
-#ifndef CONFIG_SUN4
 static int __devinit clock_probe(struct of_device *op, const struct of_device_id *match)
 {
 	struct device_node *dp = op->node;
@@ -306,38 +173,26 @@ static int __devinit clock_probe(struct of_device *op, const struct of_device_id
 	if (!model)
 		return -ENODEV;
 
+	m48t59_rtc.resource = &op->resource[0];
 	if (!strcmp(model, "mk48t02")) {
-		sp_clock_typ = MSTK48T02;
-
 		/* Map the clock register io area read-only */
-		mstk48t02_regs = of_ioremap(&op->resource[0], 0,
-					    sizeof(struct mostek48t02),
-					    "mk48t02");
-		mstk48t08_regs = NULL;  /* To catch weirdness */
+		m48t59_data.ioaddr = of_ioremap(&op->resource[0], 0,
+						2048, "rtc-m48t59");
+		m48t59_data.type = M48T59RTC_TYPE_M48T02;
 	} else if (!strcmp(model, "mk48t08")) {
-		sp_clock_typ = MSTK48T08;
-		mstk48t08_regs = of_ioremap(&op->resource[0], 0,
-					    sizeof(struct mostek48t08),
-					    "mk48t08");
-
-		mstk48t02_regs = &mstk48t08_regs->regs;
+		m48t59_data.ioaddr = of_ioremap(&op->resource[0], 0,
+						8192, "rtc-m48t59");
+		m48t59_data.type = M48T59RTC_TYPE_M48T08;
 	} else
 		return -ENODEV;
 
-	/* Report a low battery voltage condition. */
-	if (has_low_battery())
-		printk(KERN_CRIT "NVRAM: Low battery voltage!\n");
-
-	/* Kick start the clock if it is completely stopped. */
-	if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP)
-		kick_start_clock();
-
-	mostek_set_system_time();
+	if (platform_device_register(&m48t59_rtc) < 0)
+		printk(KERN_ERR "Registering RTC device failed\n");
 
 	return 0;
 }
 
-static struct of_device_id clock_match[] = {
+static struct of_device_id __initdata clock_match[] = {
 	{
 		.name = "eeprom",
 	},
@@ -348,7 +203,7 @@ static struct of_platform_driver clock_driver = {
 	.match_table	= clock_match,
 	.probe		= clock_probe,
 	.driver		= {
-		.name	= "clock",
+		.name	= "rtc",
 	},
 };
 
@@ -364,7 +219,6 @@ static int __init clock_init(void)
  * need to see the clock registers.
  */
 fs_initcall(clock_init);
-#endif /* !CONFIG_SUN4 */
 
 static void __init sbus_time_init(void)
 {
@@ -372,51 +226,8 @@ static void __init sbus_time_init(void)
 	BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM);
 	btfixup();
 
-	if (ARCH_SUN4)
-		sun4_clock_probe();
-
 	sparc_init_timers(timer_interrupt);
 	
-#ifdef CONFIG_SUN4
-	if(idprom->id_machtype == (SM_SUN4 | SM_4_330)) {
-		mostek_set_system_time();
-	} else if(idprom->id_machtype == (SM_SUN4 | SM_4_260) ) {
-		/* initialise the intersil on sun4 */
-		unsigned int year, mon, day, hour, min, sec;
-		int temp;
-		struct intersil *iregs;
-
-		iregs=intersil_clock;
-		if(!iregs) {
-			prom_printf("Something wrong, clock regs not mapped yet.\n");
-			prom_halt();
-		}
-
-		intersil_intr(intersil_clock,INTERSIL_INT_100HZ);
-		disable_pil_irq(10);
-		intersil_stop(iregs);
-		intersil_read_intr(intersil_clock, temp);
-
-		temp = iregs->clk.int_csec;
-
-		sec = iregs->clk.int_sec;
-		min = iregs->clk.int_min;
-		hour = iregs->clk.int_hour;
-		day = iregs->clk.int_day;
-		mon = iregs->clk.int_month;
-		year = MSTK_CVT_YEAR(iregs->clk.int_year);
-
-		enable_pil_irq(10);
-		intersil_start(iregs);
-
-		xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-		xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
-	        set_normalized_timespec(&wall_to_monotonic,
- 	                               -xtime.tv_sec, -xtime.tv_nsec);
-		printk("%u/%u/%u %u:%u:%u\n",day,mon,year,hour,min,sec);
-	}
-#endif
-
 	/* Now that OBP ticker has been silenced, it is safe to enable IRQ. */
 	local_irq_enable();
 }
@@ -522,80 +333,15 @@ static int sbus_do_settimeofday(struct timespec *tv)
 	return 0;
 }
 
-/*
- * BUG: This routine does not handle hour overflow properly; it just
- *      sets the minutes. Usually you won't notice until after reboot!
- */
-static int set_rtc_mmss(unsigned long nowtime)
+static int set_rtc_mmss(unsigned long secs)
 {
-	int real_seconds, real_minutes, mostek_minutes;
-	struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs;
-	unsigned long flags;
-#ifdef CONFIG_SUN4
-	struct intersil *iregs = intersil_clock;
-	int temp;
-#endif
+	struct rtc_device *rtc = rtc_class_open("rtc0");
+	int err = -1;
 
-	/* Not having a register set can lead to trouble. */
-	if (!regs) {
-#ifdef CONFIG_SUN4
-		if(!iregs)
-		return -1;
-	 	else {
-			temp = iregs->clk.int_csec;
-
-			mostek_minutes = iregs->clk.int_min;
-
-			real_seconds = nowtime % 60;
-			real_minutes = nowtime / 60;
-			if (((abs(real_minutes - mostek_minutes) + 15)/30) & 1)
-				real_minutes += 30;	/* correct for half hour time zone */
-			real_minutes %= 60;
-
-			if (abs(real_minutes - mostek_minutes) < 30) {
-				intersil_stop(iregs);
-				iregs->clk.int_sec=real_seconds;
-				iregs->clk.int_min=real_minutes;
-				intersil_start(iregs);
-			} else {
-				printk(KERN_WARNING
-			       "set_rtc_mmss: can't update from %d to %d\n",
-				       mostek_minutes, real_minutes);
-				return -1;
-			}
-			
-			return 0;
-		}
-#endif
+	if (rtc) {
+		err = rtc_set_mmss(rtc, secs);
+		rtc_class_close(rtc);
 	}
 
-	spin_lock_irqsave(&mostek_lock, flags);
-	/* Read the current RTC minutes. */
-	regs->creg |= MSTK_CREG_READ;
-	mostek_minutes = MSTK_REG_MIN(regs);
-	regs->creg &= ~MSTK_CREG_READ;
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - mostek_minutes) + 15)/30) & 1)
-		real_minutes += 30;	/* correct for half hour time zone */
-	real_minutes %= 60;
-
-	if (abs(real_minutes - mostek_minutes) < 30) {
-		regs->creg |= MSTK_CREG_WRITE;
-		MSTK_SET_REG_SEC(regs,real_seconds);
-		MSTK_SET_REG_MIN(regs,real_minutes);
-		regs->creg &= ~MSTK_CREG_WRITE;
-		spin_unlock_irqrestore(&mostek_lock, flags);
-		return 0;
-	} else {
-		spin_unlock_irqrestore(&mostek_lock, flags);
-		return -1;
-	}
+	return err;
 }
diff --git a/arch/sparc/kernel/traps.c b/arch/sparc/kernel/traps.c
index 5d45d5fd8c9..2b7d5065903 100644
--- a/arch/sparc/kernel/traps.c
+++ b/arch/sparc/kernel/traps.c
@@ -43,23 +43,6 @@ void syscall_trace_exit(struct pt_regs *regs)
 {
 }
 
-void sun4m_nmi(struct pt_regs *regs)
-{
-	unsigned long afsr, afar;
-
-	printk("Aieee: sun4m NMI received!\n");
-	/* XXX HyperSparc hack XXX */
-	__asm__ __volatile__("mov 0x500, %%g1\n\t"
-			     "lda [%%g1] 0x4, %0\n\t"
-			     "mov 0x600, %%g1\n\t"
-			     "lda [%%g1] 0x4, %1\n\t" :
-			     "=r" (afsr), "=r" (afar));
-	printk("afsr=%08lx afar=%08lx\n", afsr, afar);
-	printk("you lose buddy boy...\n");
-	show_regs(regs);
-	prom_halt();
-}
-
 void sun4d_nmi(struct pt_regs *regs)
 {
 	printk("Aieee: sun4d NMI received!\n");