aboutsummaryrefslogtreecommitdiff
path: root/arch/sparc64/Kconfig
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2005-08-30 21:46:19 -0700
committerDavid S. Miller <davem@davemloft.net>2005-08-30 21:46:19 -0700
commit5843e37e24d7cf32f7996dd015245633e0790595 (patch)
treed665ee3a23306c79f6b285c32e13a47b2db79fe6 /arch/sparc64/Kconfig
parent2ef27778a26dd828dd0d348ff12d2c180062746e (diff)
[SPARC64]: Use drivers/Kconfig
And move some other stuff into drivers/sbus/char/Kconfig. Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch/sparc64/Kconfig')
-rw-r--r--arch/sparc64/Kconfig328
1 files changed, 20 insertions, 308 deletions
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 9afd28e2c4d..17846f4ba9b 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -5,6 +5,16 @@
mainmenu "Linux/UltraSPARC Kernel Configuration"
+config SPARC64
+ bool
+ default y
+ help
+ SPARC is a family of RISC microprocessors designed and marketed by
+ Sun Microsystems, incorporated. This port covers the newer 64-bit
+ UltraSPARC. The UltraLinux project maintains both the SPARC32 and
+ SPARC64 ports; its web page is available at
+ <http://www.ultralinux.org/>.
+
config 64BIT
def_bool y
@@ -71,75 +81,6 @@ config SYSVIPC_COMPAT
menu "General machine setup"
-config BBC_I2C
- tristate "UltraSPARC-III bootbus i2c controller driver"
- depends on PCI
- help
- The BBC devices on the UltraSPARC III have two I2C controllers. The
- first I2C controller connects mainly to configuration PROMs (NVRAM,
- CPU configuration, DIMM types, etc.). The second I2C controller
- connects to environmental control devices such as fans and
- temperature sensors. The second controller also connects to the
- smartcard reader, if present. Say Y to enable support for these.
-
-config VT
- bool "Virtual terminal" if EMBEDDED
- select INPUT
- default y
- ---help---
- If you say Y here, you will get support for terminal devices with
- display and keyboard devices. These are called "virtual" because you
- can run several virtual terminals (also called virtual consoles) on
- one physical terminal. This is rather useful, for example one
- virtual terminal can collect system messages and warnings, another
- one can be used for a text-mode user session, and a third could run
- an X session, all in parallel. Switching between virtual terminals
- is done with certain key combinations, usually Alt-<function key>.
-
- The setterm command ("man setterm") can be used to change the
- properties (such as colors or beeping) of a virtual terminal. The
- man page console_codes(4) ("man console_codes") contains the special
- character sequences that can be used to change those properties
- directly. The fonts used on virtual terminals can be changed with
- the setfont ("man setfont") command and the key bindings are defined
- with the loadkeys ("man loadkeys") command.
-
- You need at least one virtual terminal device in order to make use
- of your keyboard and monitor. Therefore, only people configuring an
- embedded system would want to say N here in order to save some
- memory; the only way to log into such a system is then via a serial
- or network connection.
-
- If unsure, say Y, or else you won't be able to do much with your new
- shiny Linux system :-)
-
-config VT_CONSOLE
- bool "Support for console on virtual terminal" if EMBEDDED
- depends on VT
- default y
- ---help---
- The system console is the device which receives all kernel messages
- and warnings and which allows logins in single user mode. If you
- answer Y here, a virtual terminal (the device used to interact with
- a physical terminal) can be used as system console. This is the most
- common mode of operations, so you should say Y here unless you want
- the kernel messages be output only to a serial port (in which case
- you should say Y to "Console on serial port", below).
-
- If you do say Y here, by default the currently visible virtual
- terminal (/dev/tty0) will be used as system console. You can change
- that with a kernel command line option such as "console=tty3" which
- would use the third virtual terminal as system console. (Try "man
- bootparam" or see the documentation of your boot loader (lilo or
- loadlin) about how to pass options to the kernel at boot time.)
-
- If unsure, say Y.
-
-config HW_CONSOLE
- bool
- depends on VT
- default y
-
config SMP
bool "Symmetric multi-processing support"
---help---
@@ -205,17 +146,6 @@ config US2E_FREQ
If in doubt, say N.
-# Identify this as a Sparc64 build
-config SPARC64
- bool
- default y
- help
- SPARC is a family of RISC microprocessors designed and marketed by
- Sun Microsystems, incorporated. This port covers the newer 64-bit
- UltraSPARC. The UltraLinux project maintains both the SPARC32 and
- SPARC64 ports; its web page is available at
- <http://www.ultralinux.org/>.
-
# Global things across all Sun machines.
config RWSEM_GENERIC_SPINLOCK
bool
@@ -246,6 +176,12 @@ config HUGETLB_PAGE_SIZE_64K
endchoice
+endmenu
+
+source "drivers/firmware/Kconfig"
+
+source "mm/Kconfig"
+
config GENERIC_ISA_DMA
bool
default y
@@ -344,33 +280,6 @@ config PCI_DOMAINS
bool
default PCI
-config RTC
- tristate
- depends on PCI
- default y
- ---help---
- If you say Y here and create a character special file /dev/rtc with
- major number 10 and minor number 135 using mknod ("man mknod"), you
- will get access to the real time clock (or hardware clock) built
- into your computer.
-
- Every PC has such a clock built in. It can be used to generate
- signals from as low as 1Hz up to 8192Hz, and can also be used
- as a 24 hour alarm. It reports status information via the file
- /proc/driver/rtc and its behaviour is set by various ioctls on
- /dev/rtc.
-
- If you run Linux on a multiprocessor machine and said Y to
- "Symmetric Multi Processing" above, you should say Y here to read
- and set the RTC in an SMP compatible fashion.
-
- If you think you have a use for such a device (such as periodic data
- sampling), then say Y here, and read <file:Documentation/rtc.txt>
- for details.
-
- To compile this driver as a module, choose M here: the
- module will be called rtc.
-
source "drivers/pci/Kconfig"
config SUN_OPENPROMFS
@@ -414,6 +323,8 @@ config BINFMT_AOUT32
If you want to run SunOS binaries (see SunOS binary emulation below)
or other a.out binaries, say Y. If unsure, say N.
+menu "Executable file formats"
+
source "fs/Kconfig.binfmt"
config SUNOS_EMUL
@@ -436,74 +347,7 @@ config SOLARIS_EMUL
To compile this code as a module, choose M here: the
module will be called solaris.
-source "drivers/parport/Kconfig"
-
-config PRINTER
- tristate "Parallel printer support"
- depends on PARPORT
- ---help---
- If you intend to attach a printer to the parallel port of your Linux
- box (as opposed to using a serial printer; if the connector at the
- printer has 9 or 25 holes ["female"], then it's serial), say Y.
- Also read the Printing-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- It is possible to share one parallel port among several devices
- (e.g. printer and ZIP drive) and it is safe to compile the
- corresponding drivers into the kernel.
- To compile this driver as a module, choose M here and read
- <file:Documentation/parport.txt>. The module will be called lp.
-
- If you have several parallel ports, you can specify which ports to
- use with the "lp" kernel command line option. (Try "man bootparam"
- or see the documentation of your boot loader (lilo or loadlin) about
- how to pass options to the kernel at boot time.) The syntax of the
- "lp" command line option can be found in <file:drivers/char/lp.c>.
-
- If you have more than 8 printers, you need to increase the LP_NO
- macro in lp.c and the PARPORT_MAX macro in parport.h.
-
-config PPDEV
- tristate "Support for user-space parallel port device drivers"
- depends on PARPORT
- ---help---
- Saying Y to this adds support for /dev/parport device nodes. This
- is needed for programs that want portable access to the parallel
- port, for instance deviceid (which displays Plug-and-Play device
- IDs).
-
- This is the parallel port equivalent of SCSI generic support (sg).
- It is safe to say N to this -- it is not needed for normal printing
- or parallel port CD-ROM/disk support.
-
- To compile this driver as a module, choose M here: the
- module will be called ppdev.
-
- If unsure, say N.
-
-config ENVCTRL
- tristate "SUNW, envctrl support"
- depends on PCI
- help
- Kernel support for temperature and fan monitoring on Sun SME
- machines.
-
- To compile this driver as a module, choose M here: the
- module will be called envctrl.
-
-config DISPLAY7SEG
- tristate "7-Segment Display support"
- depends on PCI
- ---help---
- This is the driver for the 7-segment display and LED present on
- Sun Microsystems CompactPCI models CP1400 and CP1500.
-
- To compile this driver as a module, choose M here: the
- module will be called display7seg.
-
- If you do not have a CompactPCI model CP1400 or CP1500, or
- another UltraSPARC-IIi-cEngine boardset with a 7-segment display,
- you should say N to this option.
+endmenu
config CMDLINE_BOOL
bool "Default bootloader kernel arguments"
@@ -521,148 +365,16 @@ config CMDLINE
NOTE: This option WILL override the PROM bootargs setting!
-source "mm/Kconfig"
-
-endmenu
-
source "net/Kconfig"
-source "drivers/base/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "drivers/serial/Kconfig"
+source "drivers/Kconfig"
source "drivers/sbus/char/Kconfig"
-source "drivers/mtd/Kconfig"
-
-source "drivers/block/Kconfig"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
source "drivers/fc4/Kconfig"
-source "drivers/md/Kconfig"
-
-if PCI
-source "drivers/message/fusion/Kconfig"
-endif
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-source "drivers/telephony/Kconfig"
-
-# This one must be before the filesystem configs. -DaveM
-
-menu "Unix98 PTY support"
-
-config UNIX98_PTYS
- bool "Unix98 PTY support"
- ---help---
- A pseudo terminal (PTY) is a software device consisting of two
- halves: a master and a slave. The slave device behaves identical to
- a physical terminal; the master device is used by a process to
- read data from and write data to the slave, thereby emulating a
- terminal. Typical programs for the master side are telnet servers
- and xterms.
-
- Linux has traditionally used the BSD-like names /dev/ptyxx for
- masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
- has a number of problems. The GNU C library glibc 2.1 and later,
- however, supports the Unix98 naming standard: in order to acquire a
- pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
- terminal is then made available to the process and the pseudo
- terminal slave can be accessed as /dev/pts/<number>. What was
- traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
- The entries in /dev/pts/ are created on the fly by a virtual
- file system; therefore, if you say Y here you should say Y to
- "/dev/pts file system for Unix98 PTYs" as well.
-
- If you want to say Y here, you need to have the C library glibc 2.1
- or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
- Read the instructions in <file:Documentation/Changes> pertaining to
- pseudo terminals. It's safe to say N.
-
-config UNIX98_PTY_COUNT
- int "Maximum number of Unix98 PTYs in use (0-2048)"
- depends on UNIX98_PTYS
- default "256"
- help
- The maximum number of Unix98 PTYs that can be used at any one time.
- The default is 256, and should be enough for desktop systems. Server
- machines which support incoming telnet/rlogin/ssh connections and/or
- serve several X terminals may want to increase this: every incoming
- connection and every xterm uses up one PTY.
-
- When not in use, each additional set of 256 PTYs occupy
- approximately 8 KB of kernel memory on 32-bit architectures.
-
-endmenu
-
-menu "XFree86 DRI support"
-
-config DRM
- bool "Direct Rendering Manager (XFree86 DRI support)"
- help
- Kernel-level support for the Direct Rendering Infrastructure (DRI)
- introduced in XFree86 4.0. If you say Y here, you need to select
- the module that's right for your graphics card from the list below.
- These modules provide support for synchronization, security, and
- DMA transfers. Please see <http://dri.sourceforge.net/> for more
- details. You should also select and configure AGP
- (/dev/agpgart) support.
-
-config DRM_FFB
- tristate "Creator/Creator3D"
- depends on DRM && BROKEN
- help
- Choose this option if you have one of Sun's Creator3D-based graphics
- and frame buffer cards. Product page at
- <http://www.sun.com/desktop/products/Graphics/creator3d.html>.
-
-config DRM_TDFX
- tristate "3dfx Banshee/Voodoo3+"
- depends on DRM
- help
- Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
- graphics card. If M is selected, the module will be called tdfx.
-
-config DRM_R128
- tristate "ATI Rage 128"
- depends on DRM
- help
- Choose this option if you have an ATI Rage 128 graphics card. If M
- is selected, the module will be called r128. AGP support for
- this card is strongly suggested (unless you have a PCI version).
-
-endmenu
-
-source "drivers/input/Kconfig"
-
-source "drivers/i2c/Kconfig"
-
-source "drivers/hwmon/Kconfig"
-
source "fs/Kconfig"
-source "drivers/media/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "drivers/infiniband/Kconfig"
-
-source "drivers/char/watchdog/Kconfig"
-
source "arch/sparc64/oprofile/Kconfig"
source "arch/sparc64/Kconfig.debug"