[SPARC64]: of_device layer IRQ resolution

Do IRQ determination generically by parsing the PROM properties,
and using IRQ controller drivers for final resolution.

One immediate positive effect is that all of the IRQ frobbing
in the EBUS, ISA, and PCI controller layers has been eliminated.
We just look up the of_device and use the properly computed
value.

The PCI controller irq_build() routines are gone and no longer
used.  Unfortunately sbus_build_irq() has to remain as there is
a direct reference to this in the sunzilog driver.  That can be
killed off once the sparc32 side of this is written and the
sunzilog driver is transformed into an "of" bus driver.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 755 insertions, 2 deletions

diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c
index 6aa856a1815..8a70c52c044 100644
--- a/arch/sparc64/kernel/prom.c
+++ b/arch/sparc64/kernel/prom.c
@@ -15,6 +15,7 @@
  *      2 of the License, or (at your option) any later version.
  */
 
+#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/string.h>
@@ -23,7 +24,11 @@
 #include <linux/module.h>
 
 #include <asm/prom.h>
+#include <asm/of_device.h>
 #include <asm/oplib.h>
+#include <asm/irq.h>
+#include <asm/asi.h>
+#include <asm/upa.h>
 
 static struct device_node *allnodes;
 
@@ -283,6 +288,754 @@ static void * __init prom_early_alloc(unsigned long size)
 	return ret;
 }
 
+#ifdef CONFIG_PCI
+/* PSYCHO interrupt mapping support. */
+#define PSYCHO_IMAP_A_SLOT0	0x0c00UL
+#define PSYCHO_IMAP_B_SLOT0	0x0c20UL
+static unsigned long psycho_pcislot_imap_offset(unsigned long ino)
+{
+	unsigned int bus =  (ino & 0x10) >> 4;
+	unsigned int slot = (ino & 0x0c) >> 2;
+
+	if (bus == 0)
+		return PSYCHO_IMAP_A_SLOT0 + (slot * 8);
+	else
+		return PSYCHO_IMAP_B_SLOT0 + (slot * 8);
+}
+
+#define PSYCHO_IMAP_SCSI	0x1000UL
+#define PSYCHO_IMAP_ETH		0x1008UL
+#define PSYCHO_IMAP_BPP		0x1010UL
+#define PSYCHO_IMAP_AU_REC	0x1018UL
+#define PSYCHO_IMAP_AU_PLAY	0x1020UL
+#define PSYCHO_IMAP_PFAIL	0x1028UL
+#define PSYCHO_IMAP_KMS		0x1030UL
+#define PSYCHO_IMAP_FLPY	0x1038UL
+#define PSYCHO_IMAP_SHW		0x1040UL
+#define PSYCHO_IMAP_KBD		0x1048UL
+#define PSYCHO_IMAP_MS		0x1050UL
+#define PSYCHO_IMAP_SER		0x1058UL
+#define PSYCHO_IMAP_TIM0	0x1060UL
+#define PSYCHO_IMAP_TIM1	0x1068UL
+#define PSYCHO_IMAP_UE		0x1070UL
+#define PSYCHO_IMAP_CE		0x1078UL
+#define PSYCHO_IMAP_A_ERR	0x1080UL
+#define PSYCHO_IMAP_B_ERR	0x1088UL
+#define PSYCHO_IMAP_PMGMT	0x1090UL
+#define PSYCHO_IMAP_GFX		0x1098UL
+#define PSYCHO_IMAP_EUPA	0x10a0UL
+
+static unsigned long __psycho_onboard_imap_off[] = {
+/*0x20*/	PSYCHO_IMAP_SCSI,
+/*0x21*/	PSYCHO_IMAP_ETH,
+/*0x22*/	PSYCHO_IMAP_BPP,
+/*0x23*/	PSYCHO_IMAP_AU_REC,
+/*0x24*/	PSYCHO_IMAP_AU_PLAY,
+/*0x25*/	PSYCHO_IMAP_PFAIL,
+/*0x26*/	PSYCHO_IMAP_KMS,
+/*0x27*/	PSYCHO_IMAP_FLPY,
+/*0x28*/	PSYCHO_IMAP_SHW,
+/*0x29*/	PSYCHO_IMAP_KBD,
+/*0x2a*/	PSYCHO_IMAP_MS,
+/*0x2b*/	PSYCHO_IMAP_SER,
+/*0x2c*/	PSYCHO_IMAP_TIM0,
+/*0x2d*/	PSYCHO_IMAP_TIM1,
+/*0x2e*/	PSYCHO_IMAP_UE,
+/*0x2f*/	PSYCHO_IMAP_CE,
+/*0x30*/	PSYCHO_IMAP_A_ERR,
+/*0x31*/	PSYCHO_IMAP_B_ERR,
+/*0x32*/	PSYCHO_IMAP_PMGMT
+};
+#define PSYCHO_ONBOARD_IRQ_BASE		0x20
+#define PSYCHO_ONBOARD_IRQ_LAST		0x32
+#define psycho_onboard_imap_offset(__ino) \
+	__psycho_onboard_imap_off[(__ino) - PSYCHO_ONBOARD_IRQ_BASE]
+
+#define PSYCHO_ICLR_A_SLOT0	0x1400UL
+#define PSYCHO_ICLR_SCSI	0x1800UL
+
+#define psycho_iclr_offset(ino)					      \
+	((ino & 0x20) ? (PSYCHO_ICLR_SCSI + (((ino) & 0x1f) << 3)) :  \
+			(PSYCHO_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
+
+static unsigned int psycho_irq_build(struct device_node *dp,
+				     unsigned int ino,
+				     void *_data)
+{
+	unsigned long controller_regs = (unsigned long) _data;
+	unsigned long imap, iclr;
+	unsigned long imap_off, iclr_off;
+	int inofixup = 0;
+
+	ino &= 0x3f;
+	if (ino < PSYCHO_ONBOARD_IRQ_BASE) {
+		/* PCI slot */
+		imap_off = psycho_pcislot_imap_offset(ino);
+	} else {
+		/* Onboard device */
+		if (ino > PSYCHO_ONBOARD_IRQ_LAST) {
+			prom_printf("psycho_irq_build: Wacky INO [%x]\n", ino);
+			prom_halt();
+		}
+		imap_off = psycho_onboard_imap_offset(ino);
+	}
+
+	/* Now build the IRQ bucket. */
+	imap = controller_regs + imap_off;
+	imap += 4;
+
+	iclr_off = psycho_iclr_offset(ino);
+	iclr = controller_regs + iclr_off;
+	iclr += 4;
+
+	if ((ino & 0x20) == 0)
+		inofixup = ino & 0x03;
+
+	return build_irq(inofixup, iclr, imap);
+}
+
+static void psycho_irq_trans_init(struct device_node *dp)
+{
+	struct linux_prom64_registers *regs;
+
+	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+	dp->irq_trans->irq_build = psycho_irq_build;
+
+	regs = of_get_property(dp, "reg", NULL);
+	dp->irq_trans->data = (void *) regs[2].phys_addr;
+}
+
+#define sabre_read(__reg) \
+({	u64 __ret; \
+	__asm__ __volatile__("ldxa [%1] %2, %0" \
+			     : "=r" (__ret) \
+			     : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
+			     : "memory"); \
+	__ret; \
+})
+
+struct sabre_irq_data {
+	unsigned long controller_regs;
+	unsigned int pci_first_busno;
+};
+#define SABRE_CONFIGSPACE	0x001000000UL
+#define SABRE_WRSYNC		0x1c20UL
+
+#define SABRE_CONFIG_BASE(CONFIG_SPACE)	\
+	(CONFIG_SPACE | (1UL << 24))
+#define SABRE_CONFIG_ENCODE(BUS, DEVFN, REG)	\
+	(((unsigned long)(BUS)   << 16) |	\
+	 ((unsigned long)(DEVFN) << 8)  |	\
+	 ((unsigned long)(REG)))
+
+/* When a device lives behind a bridge deeper in the PCI bus topology
+ * than APB, a special sequence must run to make sure all pending DMA
+ * transfers at the time of IRQ delivery are visible in the coherency
+ * domain by the cpu.  This sequence is to perform a read on the far
+ * side of the non-APB bridge, then perform a read of Sabre's DMA
+ * write-sync register.
+ */
+static void sabre_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
+{
+	unsigned int phys_hi = (unsigned int) (unsigned long) _arg1;
+	struct sabre_irq_data *irq_data = _arg2;
+	unsigned long controller_regs = irq_data->controller_regs;
+	unsigned long sync_reg = controller_regs + SABRE_WRSYNC;
+	unsigned long config_space = controller_regs + SABRE_CONFIGSPACE;
+	unsigned int bus, devfn;
+	u16 _unused;
+
+	config_space = SABRE_CONFIG_BASE(config_space);
+
+	bus = (phys_hi >> 16) & 0xff;
+	devfn = (phys_hi >> 8) & 0xff;
+
+	config_space |= SABRE_CONFIG_ENCODE(bus, devfn, 0x00);
+
+	__asm__ __volatile__("membar #Sync\n\t"
+			     "lduha [%1] %2, %0\n\t"
+			     "membar #Sync"
+			     : "=r" (_unused)
+			     : "r" ((u16 *) config_space),
+			       "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	sabre_read(sync_reg);
+}
+
+#define SABRE_IMAP_A_SLOT0	0x0c00UL
+#define SABRE_IMAP_B_SLOT0	0x0c20UL
+#define SABRE_IMAP_SCSI		0x1000UL
+#define SABRE_IMAP_ETH		0x1008UL
+#define SABRE_IMAP_BPP		0x1010UL
+#define SABRE_IMAP_AU_REC	0x1018UL
+#define SABRE_IMAP_AU_PLAY	0x1020UL
+#define SABRE_IMAP_PFAIL	0x1028UL
+#define SABRE_IMAP_KMS		0x1030UL
+#define SABRE_IMAP_FLPY		0x1038UL
+#define SABRE_IMAP_SHW		0x1040UL
+#define SABRE_IMAP_KBD		0x1048UL
+#define SABRE_IMAP_MS		0x1050UL
+#define SABRE_IMAP_SER		0x1058UL
+#define SABRE_IMAP_UE		0x1070UL
+#define SABRE_IMAP_CE		0x1078UL
+#define SABRE_IMAP_PCIERR	0x1080UL
+#define SABRE_IMAP_GFX		0x1098UL
+#define SABRE_IMAP_EUPA		0x10a0UL
+#define SABRE_ICLR_A_SLOT0	0x1400UL
+#define SABRE_ICLR_B_SLOT0	0x1480UL
+#define SABRE_ICLR_SCSI		0x1800UL
+#define SABRE_ICLR_ETH		0x1808UL
+#define SABRE_ICLR_BPP		0x1810UL
+#define SABRE_ICLR_AU_REC	0x1818UL
+#define SABRE_ICLR_AU_PLAY	0x1820UL
+#define SABRE_ICLR_PFAIL	0x1828UL
+#define SABRE_ICLR_KMS		0x1830UL
+#define SABRE_ICLR_FLPY		0x1838UL
+#define SABRE_ICLR_SHW		0x1840UL
+#define SABRE_ICLR_KBD		0x1848UL
+#define SABRE_ICLR_MS		0x1850UL
+#define SABRE_ICLR_SER		0x1858UL
+#define SABRE_ICLR_UE		0x1870UL
+#define SABRE_ICLR_CE		0x1878UL
+#define SABRE_ICLR_PCIERR	0x1880UL
+
+static unsigned long sabre_pcislot_imap_offset(unsigned long ino)
+{
+	unsigned int bus =  (ino & 0x10) >> 4;
+	unsigned int slot = (ino & 0x0c) >> 2;
+
+	if (bus == 0)
+		return SABRE_IMAP_A_SLOT0 + (slot * 8);
+	else
+		return SABRE_IMAP_B_SLOT0 + (slot * 8);
+}
+
+static unsigned long __sabre_onboard_imap_off[] = {
+/*0x20*/	SABRE_IMAP_SCSI,
+/*0x21*/	SABRE_IMAP_ETH,
+/*0x22*/	SABRE_IMAP_BPP,
+/*0x23*/	SABRE_IMAP_AU_REC,
+/*0x24*/	SABRE_IMAP_AU_PLAY,
+/*0x25*/	SABRE_IMAP_PFAIL,
+/*0x26*/	SABRE_IMAP_KMS,
+/*0x27*/	SABRE_IMAP_FLPY,
+/*0x28*/	SABRE_IMAP_SHW,
+/*0x29*/	SABRE_IMAP_KBD,
+/*0x2a*/	SABRE_IMAP_MS,
+/*0x2b*/	SABRE_IMAP_SER,
+/*0x2c*/	0 /* reserved */,
+/*0x2d*/	0 /* reserved */,
+/*0x2e*/	SABRE_IMAP_UE,
+/*0x2f*/	SABRE_IMAP_CE,
+/*0x30*/	SABRE_IMAP_PCIERR,
+};
+#define SABRE_ONBOARD_IRQ_BASE		0x20
+#define SABRE_ONBOARD_IRQ_LAST		0x30
+#define sabre_onboard_imap_offset(__ino) \
+	__sabre_onboard_imap_off[(__ino) - SABRE_ONBOARD_IRQ_BASE]
+
+#define sabre_iclr_offset(ino)					      \
+	((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) :  \
+			(SABRE_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
+
+static unsigned int sabre_irq_build(struct device_node *dp,
+				    unsigned int ino,
+				    void *_data)
+{
+	struct sabre_irq_data *irq_data = _data;
+	unsigned long controller_regs = irq_data->controller_regs;
+	struct linux_prom_pci_registers *regs;
+	unsigned long imap, iclr;
+	unsigned long imap_off, iclr_off;
+	int inofixup = 0;
+	int virt_irq;
+
+	ino &= 0x3f;
+	if (ino < SABRE_ONBOARD_IRQ_BASE) {
+		/* PCI slot */
+		imap_off = sabre_pcislot_imap_offset(ino);
+	} else {
+		/* onboard device */
+		if (ino > SABRE_ONBOARD_IRQ_LAST) {
+			prom_printf("sabre_irq_build: Wacky INO [%x]\n", ino);
+			prom_halt();
+		}
+		imap_off = sabre_onboard_imap_offset(ino);
+	}
+
+	/* Now build the IRQ bucket. */
+	imap = controller_regs + imap_off;
+	imap += 4;
+
+	iclr_off = sabre_iclr_offset(ino);
+	iclr = controller_regs + iclr_off;
+	iclr += 4;
+
+	if ((ino & 0x20) == 0)
+		inofixup = ino & 0x03;
+
+	virt_irq = build_irq(inofixup, iclr, imap);
+
+	regs = of_get_property(dp, "reg", NULL);
+	if (regs &&
+	    ((regs->phys_hi >> 16) & 0xff) != irq_data->pci_first_busno) {
+		irq_install_pre_handler(virt_irq,
+					sabre_wsync_handler,
+					(void *) (long) regs->phys_hi,
+					(void *)
+					controller_regs +
+					SABRE_WRSYNC);
+	}
+
+	return virt_irq;
+}
+
+static void sabre_irq_trans_init(struct device_node *dp)
+{
+	struct linux_prom64_registers *regs;
+	struct sabre_irq_data *irq_data;
+	u32 *busrange;
+
+	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+	dp->irq_trans->irq_build = sabre_irq_build;
+
+	irq_data = prom_early_alloc(sizeof(struct sabre_irq_data));
+
+	regs = of_get_property(dp, "reg", NULL);
+	irq_data->controller_regs = regs[0].phys_addr;
+
+	busrange = of_get_property(dp, "bus-range", NULL);
+	irq_data->pci_first_busno = busrange[0];
+
+	dp->irq_trans->data = irq_data;
+}
+
+/* SCHIZO interrupt mapping support.  Unlike Psycho, for this controller the
+ * imap/iclr registers are per-PBM.
+ */
+#define SCHIZO_IMAP_BASE	0x1000UL
+#define SCHIZO_ICLR_BASE	0x1400UL
+
+static unsigned long schizo_imap_offset(unsigned long ino)
+{
+	return SCHIZO_IMAP_BASE + (ino * 8UL);
+}
+
+static unsigned long schizo_iclr_offset(unsigned long ino)
+{
+	return SCHIZO_ICLR_BASE + (ino * 8UL);
+}
+
+static unsigned long schizo_ino_to_iclr(unsigned long pbm_regs,
+					unsigned int ino)
+{
+	return pbm_regs + schizo_iclr_offset(ino) + 4;
+}
+
+static unsigned long schizo_ino_to_imap(unsigned long pbm_regs,
+					unsigned int ino)
+{
+	return pbm_regs + schizo_imap_offset(ino) + 4;
+}
+
+#define schizo_read(__reg) \
+({	u64 __ret; \
+	__asm__ __volatile__("ldxa [%1] %2, %0" \
+			     : "=r" (__ret) \
+			     : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
+			     : "memory"); \
+	__ret; \
+})
+#define schizo_write(__reg, __val) \
+	__asm__ __volatile__("stxa %0, [%1] %2" \
+			     : /* no outputs */ \
+			     : "r" (__val), "r" (__reg), \
+			       "i" (ASI_PHYS_BYPASS_EC_E) \
+			     : "memory")
+
+static void tomatillo_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
+{
+	unsigned long sync_reg = (unsigned long) _arg2;
+	u64 mask = 1UL << (ino & IMAP_INO);
+	u64 val;
+	int limit;
+
+	schizo_write(sync_reg, mask);
+
+	limit = 100000;
+	val = 0;
+	while (--limit) {
+		val = schizo_read(sync_reg);
+		if (!(val & mask))
+			break;
+	}
+	if (limit <= 0) {
+		printk("tomatillo_wsync_handler: DMA won't sync [%lx:%lx]\n",
+		       val, mask);
+	}
+
+	if (_arg1) {
+		static unsigned char cacheline[64]
+			__attribute__ ((aligned (64)));
+
+		__asm__ __volatile__("rd %%fprs, %0\n\t"
+				     "or %0, %4, %1\n\t"
+				     "wr %1, 0x0, %%fprs\n\t"
+				     "stda %%f0, [%5] %6\n\t"
+				     "wr %0, 0x0, %%fprs\n\t"
+				     "membar #Sync"
+				     : "=&r" (mask), "=&r" (val)
+				     : "0" (mask), "1" (val),
+				     "i" (FPRS_FEF), "r" (&cacheline[0]),
+				     "i" (ASI_BLK_COMMIT_P));
+	}
+}
+
+struct schizo_irq_data {
+	unsigned long pbm_regs;
+	unsigned long sync_reg;
+	u32 portid;
+	int chip_version;
+};
+
+static unsigned int schizo_irq_build(struct device_node *dp,
+				     unsigned int ino,
+				     void *_data)
+{
+	struct schizo_irq_data *irq_data = _data;
+	unsigned long pbm_regs = irq_data->pbm_regs;
+	unsigned long imap, iclr;
+	int ign_fixup;
+	int virt_irq;
+	int is_tomatillo;
+
+	ino &= 0x3f;
+
+	/* Now build the IRQ bucket. */
+	imap = schizo_ino_to_imap(pbm_regs, ino);
+	iclr = schizo_ino_to_iclr(pbm_regs, ino);
+
+	/* On Schizo, no inofixup occurs.  This is because each
+	 * INO has it's own IMAP register.  On Psycho and Sabre
+	 * there is only one IMAP register for each PCI slot even
+	 * though four different INOs can be generated by each
+	 * PCI slot.
+	 *
+	 * But, for JBUS variants (essentially, Tomatillo), we have
+	 * to fixup the lowest bit of the interrupt group number.
+	 */
+	ign_fixup = 0;
+
+	is_tomatillo = (irq_data->sync_reg != 0UL);
+
+	if (is_tomatillo) {
+		if (irq_data->portid & 1)
+			ign_fixup = (1 << 6);
+	}
+
+	virt_irq = build_irq(ign_fixup, iclr, imap);
+
+	if (is_tomatillo) {
+		irq_install_pre_handler(virt_irq,
+					tomatillo_wsync_handler,
+					((irq_data->chip_version <= 4) ?
+					 (void *) 1 : (void *) 0),
+					(void *) irq_data->sync_reg);
+	}
+
+	return virt_irq;
+}
+
+static void schizo_irq_trans_init(struct device_node *dp)
+{
+	struct linux_prom64_registers *regs;
+	struct schizo_irq_data *irq_data;
+
+	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+	dp->irq_trans->irq_build = schizo_irq_build;
+
+	irq_data = prom_early_alloc(sizeof(struct schizo_irq_data));
+
+	regs = of_get_property(dp, "reg", NULL);
+	dp->irq_trans->data = irq_data;
+
+	irq_data->pbm_regs = regs[0].phys_addr;
+	irq_data->sync_reg = regs[3].phys_addr + 0x1a18UL;
+	irq_data->portid = of_getintprop_default(dp, "portid", 0);
+	irq_data->chip_version = of_getintprop_default(dp, "version#", 0);
+}
+
+static unsigned int pci_sun4v_irq_build(struct device_node *dp,
+					unsigned int devino,
+					void *_data)
+{
+	u32 devhandle = (u32) (unsigned long) _data;
+
+	return sun4v_build_irq(devhandle, devino);
+}
+
+static void pci_sun4v_irq_trans_init(struct device_node *dp)
+{
+	struct linux_prom64_registers *regs;
+
+	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+	dp->irq_trans->irq_build = pci_sun4v_irq_build;
+
+	regs = of_get_property(dp, "reg", NULL);
+	dp->irq_trans->data = (void *) (unsigned long)
+		((regs->phys_addr >> 32UL) & 0x0fffffff);
+}
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_SBUS
+/* INO number to IMAP register offset for SYSIO external IRQ's.
+ * This should conform to both Sunfire/Wildfire server and Fusion
+ * desktop designs.
+ */
+#define SYSIO_IMAP_SLOT0	0x2c04UL
+#define SYSIO_IMAP_SLOT1	0x2c0cUL
+#define SYSIO_IMAP_SLOT2	0x2c14UL
+#define SYSIO_IMAP_SLOT3	0x2c1cUL
+#define SYSIO_IMAP_SCSI		0x3004UL
+#define SYSIO_IMAP_ETH		0x300cUL
+#define SYSIO_IMAP_BPP		0x3014UL
+#define SYSIO_IMAP_AUDIO	0x301cUL
+#define SYSIO_IMAP_PFAIL	0x3024UL
+#define SYSIO_IMAP_KMS		0x302cUL
+#define SYSIO_IMAP_FLPY		0x3034UL
+#define SYSIO_IMAP_SHW		0x303cUL
+#define SYSIO_IMAP_KBD		0x3044UL
+#define SYSIO_IMAP_MS		0x304cUL
+#define SYSIO_IMAP_SER		0x3054UL
+#define SYSIO_IMAP_TIM0		0x3064UL
+#define SYSIO_IMAP_TIM1		0x306cUL
+#define SYSIO_IMAP_UE		0x3074UL
+#define SYSIO_IMAP_CE		0x307cUL
+#define SYSIO_IMAP_SBERR	0x3084UL
+#define SYSIO_IMAP_PMGMT	0x308cUL
+#define SYSIO_IMAP_GFX		0x3094UL
+#define SYSIO_IMAP_EUPA		0x309cUL
+
+#define bogon     ((unsigned long) -1)
+static unsigned long sysio_irq_offsets[] = {
+	/* SBUS Slot 0 --> 3, level 1 --> 7 */
+	SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
+	SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
+	SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
+	SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
+	SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
+	SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
+	SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
+	SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
+
+	/* Onboard devices (not relevant/used on SunFire). */
+	SYSIO_IMAP_SCSI,
+	SYSIO_IMAP_ETH,
+	SYSIO_IMAP_BPP,
+	bogon,
+	SYSIO_IMAP_AUDIO,
+	SYSIO_IMAP_PFAIL,
+	bogon,
+	bogon,
+	SYSIO_IMAP_KMS,
+	SYSIO_IMAP_FLPY,
+	SYSIO_IMAP_SHW,
+	SYSIO_IMAP_KBD,
+	SYSIO_IMAP_MS,
+	SYSIO_IMAP_SER,
+	bogon,
+	bogon,
+	SYSIO_IMAP_TIM0,
+	SYSIO_IMAP_TIM1,
+	bogon,
+	bogon,
+	SYSIO_IMAP_UE,
+	SYSIO_IMAP_CE,
+	SYSIO_IMAP_SBERR,
+	SYSIO_IMAP_PMGMT,
+};
+
+#undef bogon
+
+#define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets)
+
+/* Convert Interrupt Mapping register pointer to associated
+ * Interrupt Clear register pointer, SYSIO specific version.
+ */
+#define SYSIO_ICLR_UNUSED0	0x3400UL
+#define SYSIO_ICLR_SLOT0	0x340cUL
+#define SYSIO_ICLR_SLOT1	0x344cUL
+#define SYSIO_ICLR_SLOT2	0x348cUL
+#define SYSIO_ICLR_SLOT3	0x34ccUL
+static unsigned long sysio_imap_to_iclr(unsigned long imap)
+{
+	unsigned long diff = SYSIO_ICLR_UNUSED0 - SYSIO_IMAP_SLOT0;
+	return imap + diff;
+}
+
+static unsigned int sbus_of_build_irq(struct device_node *dp,
+				      unsigned int ino,
+				      void *_data)
+{
+	unsigned long reg_base = (unsigned long) _data;
+	struct linux_prom_registers *regs;
+	unsigned long imap, iclr;
+	int sbus_slot = 0;
+	int sbus_level = 0;
+
+	ino &= 0x3f;
+
+	regs = of_get_property(dp, "reg", NULL);
+	if (regs)
+		sbus_slot = regs->which_io;
+
+	if (ino < 0x20)
+		ino += (sbus_slot * 8);
+
+	imap = sysio_irq_offsets[ino];
+	if (imap == ((unsigned long)-1)) {
+		prom_printf("get_irq_translations: Bad SYSIO INO[%x]\n",
+			    ino);
+		prom_halt();
+	}
+	imap += reg_base;
+
+	/* SYSIO inconsistency.  For external SLOTS, we have to select
+	 * the right ICLR register based upon the lower SBUS irq level
+	 * bits.
+	 */
+	if (ino >= 0x20) {
+		iclr = sysio_imap_to_iclr(imap);
+	} else {
+		sbus_level = ino & 0x7;
+
+		switch(sbus_slot) {
+		case 0:
+			iclr = reg_base + SYSIO_ICLR_SLOT0;
+			break;
+		case 1:
+			iclr = reg_base + SYSIO_ICLR_SLOT1;
+			break;
+		case 2:
+			iclr = reg_base + SYSIO_ICLR_SLOT2;
+			break;
+		default:
+		case 3:
+			iclr = reg_base + SYSIO_ICLR_SLOT3;
+			break;
+		};
+
+		iclr += ((unsigned long)sbus_level - 1UL) * 8UL;
+	}
+	return build_irq(sbus_level, iclr, imap);
+}
+
+static void sbus_irq_trans_init(struct device_node *dp)
+{
+	struct linux_prom64_registers *regs;
+
+	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+	dp->irq_trans->irq_build = sbus_of_build_irq;
+
+	regs = of_get_property(dp, "reg", NULL);
+	dp->irq_trans->data = (void *) (unsigned long) regs->phys_addr;
+}
+#endif /* CONFIG_SBUS */
+
+
+static unsigned int central_build_irq(struct device_node *dp,
+				      unsigned int ino,
+				      void *_data)
+{
+	struct device_node *central_dp = _data;
+	struct of_device *central_op = of_find_device_by_node(central_dp);
+	struct resource *res;
+	unsigned long imap, iclr;
+	u32 tmp;
+
+	if (!strcmp(dp->name, "eeprom")) {
+		res = &central_op->resource[5];
+	} else if (!strcmp(dp->name, "zs")) {
+		res = &central_op->resource[4];
+	} else if (!strcmp(dp->name, "clock-board")) {
+		res = &central_op->resource[3];
+	} else {
+		return ino;
+	}
+
+	imap = res->start + 0x00UL;
+	iclr = res->start + 0x10UL;
+
+	/* Set the INO state to idle, and disable.  */
+	upa_writel(0, iclr);
+	upa_readl(iclr);
+
+	tmp = upa_readl(imap);
+	tmp &= ~0x80000000;
+	upa_writel(tmp, imap);
+
+	return build_irq(0, iclr, imap);
+}
+
+static void central_irq_trans_init(struct device_node *dp)
+{
+	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+	dp->irq_trans->irq_build = central_build_irq;
+
+	dp->irq_trans->data = dp;
+}
+
+struct irq_trans {
+	const char *name;
+	void (*init)(struct device_node *);
+};
+
+#ifdef CONFIG_PCI
+static struct irq_trans pci_irq_trans_table[] = {
+	{ "SUNW,sabre", sabre_irq_trans_init },
+	{ "pci108e,a000", sabre_irq_trans_init },
+	{ "pci108e,a001", sabre_irq_trans_init },
+	{ "SUNW,psycho", psycho_irq_trans_init },
+	{ "pci108e,8000", psycho_irq_trans_init },
+	{ "SUNW,schizo", schizo_irq_trans_init },
+	{ "pci108e,8001", schizo_irq_trans_init },
+	{ "SUNW,schizo+", schizo_irq_trans_init },
+	{ "pci108e,8002", schizo_irq_trans_init },
+	{ "SUNW,tomatillo", schizo_irq_trans_init },
+	{ "pci108e,a801", schizo_irq_trans_init },
+	{ "SUNW,sun4v-pci", pci_sun4v_irq_trans_init },
+};
+#endif
+
+static void irq_trans_init(struct device_node *dp)
+{
+	const char *model;
+	int i;
+
+	model = of_get_property(dp, "model", NULL);
+	if (!model)
+		model = of_get_property(dp, "compatible", NULL);
+	if (!model)
+		return;
+
+#ifdef CONFIG_PCI
+	for (i = 0; i < ARRAY_SIZE(pci_irq_trans_table); i++) {
+		struct irq_trans *t = &pci_irq_trans_table[i];
+
+		if (!strcmp(model, t->name))
+			return t->init(dp);
+	}
+#endif
+#ifdef CONFIG_SBUS
+	if (!strcmp(dp->name, "sbus") ||
+	    !strcmp(dp->name, "sbi"))
+		return sbus_irq_trans_init(dp);
+#endif
+	if (!strcmp(dp->name, "central"))
+		return central_irq_trans_init(dp->child);
+}
+
 static int is_root_node(const struct device_node *dp)
 {
 	if (!dp)
@@ -706,10 +1459,10 @@ static struct device_node * __init create_node(phandle node)
 	dp->type = get_one_property(node, "device_type");
 	dp->node = node;
 
-	/* Build interrupts later... */
-
 	dp->properties = build_prop_list(node);
 
+	irq_trans_init(dp);
+
 	return dp;
 }