x86: remove the Voyager 32-bit subarch

Impact: remove unused/broken code

The Voyager subarch last built successfully on the v2.6.26 kernel
and has been stale since then and does not build on the v2.6.27,
v2.6.28 and v2.6.29-rc5 kernels.

No actual users beyond the maintainer reported this breakage.
Patches were sent and most of the fixes were accepted but the
discussion around how to do a few remaining issues cleanly
fizzled out with no resolution and the code remained broken.

In the v2.6.30 x86 tree development cycle 32-bit subarch support
has been reworked and removed - and the Voyager code, beyond the
build problems already known, needs serious and significant
changes and probably a rewrite to support it.

CONFIG_X86_VOYAGER has been marked BROKEN then. The maintainer has
been notified but no patches have been sent so far to fix it.

While all other subarchs have been converted to the new scheme,
voyager is still broken. We'd prefer to receive patches which
clean up the current situation in a constructive way, but even in
case of removal there is no obstacle to add that support back
after the issues have been sorted out in a mutually acceptable
fashion.

So remove this inactive code for now.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 0 insertions, 119 deletions

diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c
deleted file mode 100644
index 88c3c555634..00000000000
--- a/arch/x86/mach-voyager/setup.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- *	Machine specific setup for generic
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/arch_hooks.h>
-#include <asm/voyager.h>
-#include <asm/e820.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-#include <asm/cpu.h>
-
-void __init pre_intr_init_hook(void)
-{
-	init_ISA_irqs();
-}
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = {
-	.handler = no_action,
-	.mask = CPU_MASK_NONE,
-	.name = "cascade",
-};
-
-void __init intr_init_hook(void)
-{
-#ifdef CONFIG_SMP
-	voyager_smp_intr_init();
-#endif
-
-	setup_irq(2, &irq2);
-}
-
-static void voyager_disable_tsc(void)
-{
-	/* Voyagers run their CPUs from independent clocks, so disable
-	 * the TSC code because we can't sync them */
-	setup_clear_cpu_cap(X86_FEATURE_TSC);
-}
-
-void __init pre_setup_arch_hook(void)
-{
-	voyager_disable_tsc();
-}
-
-void __init pre_time_init_hook(void)
-{
-	voyager_disable_tsc();
-}
-
-void __init trap_init_hook(void)
-{
-}
-
-static struct irqaction irq0 = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
-	.mask = CPU_MASK_NONE,
-	.name = "timer"
-};
-
-void __init time_init_hook(void)
-{
-	irq0.mask = cpumask_of_cpu(safe_smp_processor_id());
-	setup_irq(0, &irq0);
-}
-
-/* Hook for machine specific memory setup. */
-
-char *__init machine_specific_memory_setup(void)
-{
-	char *who;
-	int new_nr;
-
-	who = "NOT VOYAGER";
-
-	if (voyager_level == 5) {
-		__u32 addr, length;
-		int i;
-
-		who = "Voyager-SUS";
-
-		e820.nr_map = 0;
-		for (i = 0; voyager_memory_detect(i, &addr, &length); i++) {
-			e820_add_region(addr, length, E820_RAM);
-		}
-		return who;
-	} else if (voyager_level == 4) {
-		__u32 tom;
-		__u16 catbase = inb(VOYAGER_SSPB_RELOCATION_PORT) << 8;
-		/* select the DINO config space */
-		outb(VOYAGER_DINO, VOYAGER_CAT_CONFIG_PORT);
-		/* Read DINO top of memory register */
-		tom = ((inb(catbase + 0x4) & 0xf0) << 16)
-		    + ((inb(catbase + 0x5) & 0x7f) << 24);
-
-		if (inb(catbase) != VOYAGER_DINO) {
-			printk(KERN_ERR
-			       "Voyager: Failed to get DINO for L4, setting tom to EXT_MEM_K\n");
-			tom = (boot_params.screen_info.ext_mem_k) << 10;
-		}
-		who = "Voyager-TOM";
-		e820_add_region(0, 0x9f000, E820_RAM);
-		/* map from 1M to top of memory */
-		e820_add_region(1 * 1024 * 1024, tom - 1 * 1024 * 1024,
-				  E820_RAM);
-		/* FIXME: Should check the ASICs to see if I need to
-		 * take out the 8M window.  Just do it at the moment
-		 * */
-		e820_add_region(8 * 1024 * 1024, 8 * 1024 * 1024,
-				  E820_RESERVED);
-		return who;
-	}
-
-	return default_machine_specific_memory_setup();
-}