Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 396 insertions, 0 deletions

diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S
new file mode 100644
index 00000000000..b6d8725c1f6
--- /dev/null
+++ b/arch/x86_64/kernel/head.S
@@ -0,0 +1,396 @@
+/*
+ *  linux/arch/x86_64/kernel/head.S -- start in 32bit and switch to 64bit
+ *
+ *  Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
+ *  Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
+ *  Copyright (C) 2000 Karsten Keil <kkeil@suse.de>
+ *  Copyright (C) 2001,2002 Andi Kleen <ak@suse.de>
+ *
+ *  $Id: head.S,v 1.49 2002/03/19 17:39:25 ak Exp $
+ */
+
+
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <asm/desc.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/msr.h>
+#include <asm/cache.h>
+	
+/* we are not able to switch in one step to the final KERNEL ADRESS SPACE
+ * because we need identity-mapped pages on setup so define __START_KERNEL to
+ * 0x100000 for this stage
+ * 
+ */
+
+	.text
+	.code32
+	.globl startup_32
+/* %bx:	 1 if coming from smp trampoline on secondary cpu */ 
+startup_32:
+	
+	/*
+	 * At this point the CPU runs in 32bit protected mode (CS.D = 1) with
+	 * paging disabled and the point of this file is to switch to 64bit
+	 * long mode with a kernel mapping for kerneland to jump into the
+	 * kernel virtual addresses.
+ 	 * There is no stack until we set one up.
+	 */
+
+	/* Initialize the %ds segment register */
+	movl $__KERNEL_DS,%eax
+	movl %eax,%ds
+
+	/* Load new GDT with the 64bit segments using 32bit descriptor */
+	lgdt	pGDT32 - __START_KERNEL_map
+
+	/* If the CPU doesn't support CPUID this will double fault.
+	 * Unfortunately it is hard to check for CPUID without a stack. 
+	 */
+	
+	/* Check if extended functions are implemented */		
+	movl	$0x80000000, %eax
+	cpuid
+	cmpl	$0x80000000, %eax
+	jbe	no_long_mode
+	/* Check if long mode is implemented */
+	mov	$0x80000001, %eax
+	cpuid
+	btl	$29, %edx
+	jnc	no_long_mode
+
+	/*
+	 * Prepare for entering 64bits mode
+	 */
+
+	/* Enable PAE mode */
+	xorl	%eax, %eax
+	btsl	$5, %eax
+	movl	%eax, %cr4
+
+	/* Setup early boot stage 4 level pagetables */
+	movl	$(init_level4_pgt - __START_KERNEL_map), %eax
+	movl	%eax, %cr3
+
+	/* Setup EFER (Extended Feature Enable Register) */
+	movl	$MSR_EFER, %ecx
+	rdmsr
+
+	/* Enable Long Mode */
+	btsl	$_EFER_LME, %eax
+				
+	/* Make changes effective */
+	wrmsr
+
+	xorl	%eax, %eax
+	btsl	$31, %eax			/* Enable paging and in turn activate Long Mode */
+	btsl	$0, %eax			/* Enable protected mode */
+	/* Make changes effective */
+	movl	%eax, %cr0
+	/*
+	 * At this point we're in long mode but in 32bit compatibility mode
+	 * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
+	 * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use
+	 * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
+	 */
+	ljmp	$__KERNEL_CS, $(startup_64 - __START_KERNEL_map)
+
+	.code64
+	.org 0x100	
+	.globl startup_64
+startup_64:
+	/* We come here either from startup_32
+	 * or directly from a 64bit bootloader.
+	 * Since we may have come directly from a bootloader we
+	 * reload the page tables here.
+	 */
+
+	/* Enable PAE mode and PGE */
+	xorq	%rax, %rax
+	btsq	$5, %rax
+	btsq	$7, %rax
+	movq	%rax, %cr4
+
+	/* Setup early boot stage 4 level pagetables. */
+	movq	$(init_level4_pgt - __START_KERNEL_map), %rax
+	movq	%rax, %cr3
+
+	/* Check if nx is implemented */
+	movl	$0x80000001, %eax
+	cpuid
+	movl	%edx,%edi
+
+	/* Setup EFER (Extended Feature Enable Register) */
+	movl	$MSR_EFER, %ecx
+	rdmsr
+
+	/* Enable System Call */
+	btsl	$_EFER_SCE, %eax
+
+	/* No Execute supported? */
+	btl	$20,%edi
+	jnc     1f
+	btsl	$_EFER_NX, %eax
+1:
+	/* Make changes effective */
+	wrmsr
+
+	/* Setup cr0 */
+	xorq	%rax, %rax
+	btsq	$31, %rax			/* Enable paging */
+	btsq	$0, %rax			/* Enable protected mode */
+	btsq	$1, %rax			/* Enable MP */
+	btsq	$4, %rax			/* Enable ET */
+	btsq	$5, %rax			/* Enable NE */
+	btsq	$16, %rax			/* Enable WP */
+	btsq	$18, %rax			/* Enable AM */
+	/* Make changes effective */
+	movq	%rax, %cr0
+
+	/* Setup a boot time stack */
+	movq init_rsp(%rip),%rsp
+
+	/* zero EFLAGS after setting rsp */
+	pushq $0
+	popfq
+
+	/*
+	 * We must switch to a new descriptor in kernel space for the GDT
+	 * because soon the kernel won't have access anymore to the userspace
+	 * addresses where we're currently running on. We have to do that here
+	 * because in 32bit we couldn't load a 64bit linear address.
+	 */
+	lgdt	cpu_gdt_descr
+
+	/* 
+	 * Setup up a dummy PDA. this is just for some early bootup code
+	 * that does in_interrupt() 
+	 */ 
+	movl	$MSR_GS_BASE,%ecx
+	movq	$empty_zero_page,%rax
+	movq    %rax,%rdx
+	shrq	$32,%rdx
+	wrmsr	
+
+	/* set up data segments. actually 0 would do too */
+	movl $__KERNEL_DS,%eax
+	movl %eax,%ds	
+	movl %eax,%ss
+	movl %eax,%es
+			
+	/* esi is pointer to real mode structure with interesting info.
+	   pass it to C */
+	movl	%esi, %edi
+	
+	/* Finally jump to run C code and to be on real kernel address
+	 * Since we are running on identity-mapped space we have to jump
+	 * to the full 64bit address , this is only possible as indirect
+	 * jump
+	 */
+	movq	initial_code(%rip),%rax
+	jmp	*%rax
+
+	/* SMP bootup changes these two */	
+	.globl	initial_code
+initial_code:
+	.quad	x86_64_start_kernel
+	.globl init_rsp
+init_rsp:
+	.quad  init_thread_union+THREAD_SIZE-8
+
+ENTRY(early_idt_handler)
+	xorl %eax,%eax
+	movq 8(%rsp),%rsi	# get rip
+	movq (%rsp),%rdx
+	movq %cr2,%rcx
+	leaq early_idt_msg(%rip),%rdi
+	call early_printk
+1:	hlt
+	jmp 1b
+
+early_idt_msg:
+	.asciz "PANIC: early exception rip %lx error %lx cr2 %lx\n"
+
+.code32
+ENTRY(no_long_mode)
+	/* This isn't an x86-64 CPU so hang */
+1:
+	jmp	1b
+
+.org 0xf00
+	.globl pGDT32
+pGDT32:
+	.word	gdt_end-cpu_gdt_table
+	.long	cpu_gdt_table-__START_KERNEL_map
+
+.org 0xf10	
+ljumpvector:
+	.long	startup_64-__START_KERNEL_map
+	.word	__KERNEL_CS
+
+ENTRY(stext)
+ENTRY(_stext)
+
+	/*
+	 * This default setting generates an ident mapping at address 0x100000
+	 * and a mapping for the kernel that precisely maps virtual address
+	 * 0xffffffff80000000 to physical address 0x000000. (always using
+	 * 2Mbyte large pages provided by PAE mode)
+	 */
+.org 0x1000
+ENTRY(init_level4_pgt)
+	.quad	0x0000000000102007		/* -> level3_ident_pgt */
+	.fill	255,8,0
+	.quad	0x000000000010a007
+	.fill	254,8,0
+	/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
+	.quad	0x0000000000103007		/* -> level3_kernel_pgt */
+
+.org 0x2000
+ENTRY(level3_ident_pgt)
+	.quad	0x0000000000104007
+	.fill	511,8,0
+
+.org 0x3000
+ENTRY(level3_kernel_pgt)
+	.fill	510,8,0
+	/* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
+	.quad	0x0000000000105007		/* -> level2_kernel_pgt */
+	.fill	1,8,0
+
+.org 0x4000
+ENTRY(level2_ident_pgt)
+	/* 40MB for bootup. 	*/
+	.quad	0x0000000000000283
+	.quad	0x0000000000200183
+	.quad	0x0000000000400183
+	.quad	0x0000000000600183
+	.quad	0x0000000000800183
+	.quad	0x0000000000A00183
+	.quad	0x0000000000C00183
+	.quad	0x0000000000E00183
+	.quad	0x0000000001000183
+	.quad	0x0000000001200183
+	.quad	0x0000000001400183
+	.quad	0x0000000001600183
+	.quad	0x0000000001800183
+	.quad	0x0000000001A00183
+	.quad	0x0000000001C00183
+	.quad	0x0000000001E00183
+	.quad	0x0000000002000183
+	.quad	0x0000000002200183
+	.quad	0x0000000002400183
+	.quad	0x0000000002600183
+	/* Temporary mappings for the super early allocator in arch/x86_64/mm/init.c */
+	.globl temp_boot_pmds
+temp_boot_pmds:
+	.fill	492,8,0
+	
+.org 0x5000
+ENTRY(level2_kernel_pgt)
+	/* 40MB kernel mapping. The kernel code cannot be bigger than that.
+	   When you change this change KERNEL_TEXT_SIZE in page.h too. */
+	/* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */
+	.quad	0x0000000000000183
+	.quad	0x0000000000200183
+	.quad	0x0000000000400183
+	.quad	0x0000000000600183
+	.quad	0x0000000000800183
+	.quad	0x0000000000A00183
+	.quad	0x0000000000C00183
+	.quad	0x0000000000E00183
+	.quad	0x0000000001000183
+	.quad	0x0000000001200183
+	.quad	0x0000000001400183
+	.quad	0x0000000001600183
+	.quad	0x0000000001800183
+	.quad	0x0000000001A00183
+	.quad	0x0000000001C00183
+	.quad	0x0000000001E00183
+	.quad	0x0000000002000183
+	.quad	0x0000000002200183
+	.quad	0x0000000002400183
+	.quad	0x0000000002600183
+	/* Module mapping starts here */
+	.fill	492,8,0
+
+.org 0x6000
+ENTRY(empty_zero_page)
+
+.org 0x7000
+ENTRY(empty_bad_page)
+
+.org 0x8000
+ENTRY(empty_bad_pte_table)
+
+.org 0x9000
+ENTRY(empty_bad_pmd_table)
+
+.org 0xa000
+ENTRY(level3_physmem_pgt)
+	.quad	0x0000000000105007		/* -> level2_kernel_pgt (so that __va works even before pagetable_init) */
+
+	.org 0xb000
+#ifdef CONFIG_ACPI_SLEEP
+ENTRY(wakeup_level4_pgt)
+	.quad	0x0000000000102007		/* -> level3_ident_pgt */
+	.fill	255,8,0
+	.quad	0x000000000010a007
+	.fill	254,8,0
+	/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
+	.quad	0x0000000000103007		/* -> level3_kernel_pgt */
+#endif
+
+	.data
+
+	.align 16
+	.globl cpu_gdt_descr
+cpu_gdt_descr:
+	.word	gdt_end-cpu_gdt_table
+gdt:
+	.quad	cpu_gdt_table
+#ifdef CONFIG_SMP
+	.rept	NR_CPUS-1
+	.word	0
+	.quad	0
+	.endr
+#endif
+
+/* We need valid kernel segments for data and code in long mode too
+ * IRET will check the segment types  kkeil 2000/10/28
+ * Also sysret mandates a special GDT layout 
+ */
+		 		
+.align L1_CACHE_BYTES
+
+/* The TLS descriptors are currently at a different place compared to i386.
+   Hopefully nobody expects them at a fixed place (Wine?) */
+	
+ENTRY(cpu_gdt_table)
+	.quad	0x0000000000000000	/* NULL descriptor */
+	.quad	0x008f9a000000ffff	/* __KERNEL_COMPAT32_CS */	
+	.quad	0x00af9a000000ffff	/* __KERNEL_CS */
+	.quad	0x00cf92000000ffff	/* __KERNEL_DS */
+	.quad	0x00cffa000000ffff	/* __USER32_CS */
+	.quad	0x00cff2000000ffff	/* __USER_DS, __USER32_DS  */		
+	.quad	0x00affa000000ffff	/* __USER_CS */
+	.quad	0x00cf9a000000ffff	/* __KERNEL32_CS */
+	.quad	0,0			/* TSS */
+	.quad	0,0			/* LDT */
+	.quad   0,0,0			/* three TLS descriptors */ 
+	.quad	0x00009a000000ffff	/* __KERNEL16_CS - 16bit PM for S3 wakeup. */
+					/* base must be patched for real base address. */
+gdt_end:	
+	/* asm/segment.h:GDT_ENTRIES must match this */	
+	/* This should be a multiple of the cache line size */
+	/* GDTs of other CPUs: */	
+	.fill (GDT_SIZE * NR_CPUS) - (gdt_end - cpu_gdt_table)
+
+	.align  L1_CACHE_BYTES
+ENTRY(idt_table)	
+	.rept   256
+	.quad   0
+	.quad 	0
+	.endr
+