diff options
| author | Linus Torvalds <torvalds@g5.osdl.org> | 2006-09-28 14:40:39 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@g5.osdl.org> | 2006-09-28 14:40:39 -0700 |
| commit | ebdea46fecae40c4d7effcd33f40918a37a1df4b (patch) | |
| tree | e4312bf7f1f3d184738963a0ec300aa9fdfd55c1 /arch | |
| parent | fecf3404f4aba6d0edeba31eeb018cbb6326dff2 (diff) | |
| parent | 250d375d1da45a5e08ab8baf5eaa7eb258afd82b (diff) | |
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (130 commits)
[ARM] 3856/1: Add clocksource for Intel IXP4xx platforms
[ARM] 3855/1: Add generic time support
[ARM] 3873/1: S3C24XX: Add irq_chip names
[ARM] 3872/1: S3C24XX: Apply consistant tabbing to irq_chips
[ARM] 3871/1: S3C24XX: Fix ordering of EINT4..23
[ARM] nommu: confirms the CR_V bit in nommu mode
[ARM] nommu: abort handler fixup for !CPU_CP15_MMU cores.
[ARM] 3870/1: AT91: Start removing static memory mappings
[ARM] 3869/1: AT91: NAND support for DK and KB9202 boards
[ARM] 3868/1: AT91 hardware header update
[ARM] 3867/1: AT91 GPIO update
[ARM] 3866/1: AT91 clock update
[ARM] 3865/1: AT91RM9200 header updates
[ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 series
[ARM] kthread: switch arch/arm/kernel/apm.c
[ARM] Off-by-one in arch/arm/common/icst*
[ARM] 3864/1: Refactore sharpsl_pm
[ARM] 3863/1: Add Locomo SPI Device
[ARM] 3847/2: Convert LOMOMO to use struct device for GPIOs
[ARM] Use CPU_CACHE_* where possible in asm/cacheflush.h
...
Diffstat (limited to 'arch')
174 files changed, 9075 insertions, 7941 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f81a62380ad..f9362ee9955 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -17,6 +17,10 @@ config ARM Europe. There is an ARM Linux project with a web page at <http://www.arm.linux.org.uk/>. +config GENERIC_TIME + bool + default n + config MMU bool default y @@ -51,6 +55,10 @@ config GENERIC_HARDIRQS bool default y +config TRACE_IRQFLAGS_SUPPORT + bool + default y + config HARDIRQS_SW_RESEND bool default y @@ -91,7 +99,7 @@ config ARCH_MTD_XIP config VECTORS_BASE hex - default 0xffff0000 if MMU + default 0xffff0000 if MMU || CPU_HIGH_VECTOR default DRAM_BASE if REMAP_VECTORS_TO_RAM default 0x00000000 help @@ -198,16 +206,27 @@ config ARCH_IMX help Support for Motorola's i.MX family of processors (MX1, MXL). -config ARCH_IOP3XX - bool "IOP3xx-based" +config ARCH_IOP32X + bool "IOP32x-based" + depends on MMU + select PLAT_IOP + select PCI + help + Support for Intel's 80219 and IOP32X (XScale) family of + processors. + +config ARCH_IOP33X + bool "IOP33x-based" depends on MMU + select PLAT_IOP select PCI help - Support for Intel's IOP3XX (XScale) family of processors. + Support for Intel's IOP33X (XScale) family of processors. config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU + select GENERIC_TIME help Support for Intel's IXP4XX (XScale) family of processors. @@ -308,7 +327,9 @@ source "arch/arm/mach-footbridge/Kconfig" source "arch/arm/mach-integrator/Kconfig" -source "arch/arm/mach-iop3xx/Kconfig" +source "arch/arm/mach-iop32x/Kconfig" + +source "arch/arm/mach-iop33x/Kconfig" source "arch/arm/mach-ixp4xx/Kconfig" @@ -348,6 +369,9 @@ source "arch/arm/mach-netx/Kconfig" config ARCH_ACORN bool +config PLAT_IOP + bool + source arch/arm/mm/Kconfig # bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER @@ -602,6 +626,7 @@ config LEDS_CPU config ALIGNMENT_TRAP bool + depends on CPU_CP15_MMU default y if !ARCH_EBSA110 help ARM processors can not fetch/store information which is not @@ -633,11 +658,12 @@ config ZBOOT_ROM_BSS hex "Compressed ROM boot loader BSS address" default "0" help - The base address of 64KiB of read/write memory in the target - for the ROM-able zImage, which must be available while the - decompressor is running. Platforms which normally make use of - ROM-able zImage formats normally set this to a suitable - value in their defconfig file. + The base address of an area of read/write memory in the target + for the ROM-able zImage which must be available while the + decompressor is running. It must be large enough to hold the + entire decompressed kernel plus an additional 128 KiB. + Platforms which normally make use of ROM-able zImage formats + normally set this to a suitable value in their defconfig file. If ZBOOT_ROM is not enabled, this has no effect. @@ -832,7 +858,7 @@ source "drivers/base/Kconfig" source "drivers/connector/Kconfig" -if ALIGNMENT_TRAP +if ALIGNMENT_TRAP || !CPU_CP15_MMU source "drivers/mtd/Kconfig" endif @@ -844,7 +870,7 @@ source "drivers/block/Kconfig" source "drivers/acorn/block/Kconfig" -if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ +if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ || ARCH_IXP23XX diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu index e1574be2ded..f087376748d 100644 --- a/arch/arm/Kconfig-nommu +++ b/arch/arm/Kconfig-nommu @@ -25,6 +25,14 @@ config FLASH_SIZE hex 'FLASH Size' if SET_MEM_PARAM default 0x00400000 +config PROCESSOR_ID + hex + default 0x00007700 + depends on !CPU_CP15 + help + If processor has no CP15 register, this processor ID is + used instead of the auto-probing which utilizes the register. + config REMAP_VECTORS_TO_RAM bool 'Install vectors to the begining of RAM' if DRAM_BASE depends on DRAM_BASE diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 92873cdee31..2a0b2c8a1fe 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -55,7 +55,12 @@ arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3 # This selects how we optimise for the processor. tune-$(CONFIG_CPU_ARM610) :=-mtune=arm610 tune-$(CONFIG_CPU_ARM710) :=-mtune=arm710 +tune-$(CONFIG_CPU_ARM7TDMI) :=-mtune=arm7tdmi tune-$(CONFIG_CPU_ARM720T) :=-mtune=arm7tdmi +tune-$(CONFIG_CPU_ARM740T) :=-mtune=arm7tdmi +tune-$(CONFIG_CPU_ARM9TDMI) :=-mtune=arm9tdmi +tune-$(CONFIG_CPU_ARM940T) :=-mtune=arm9tdmi +tune-$(CONFIG_CPU_ARM946T) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi) tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi @@ -101,7 +106,8 @@ endif machine-$(CONFIG_ARCH_INTEGRATOR) := integrator textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 machine-$(CONFIG_ARCH_CLPS711X) := clps711x - machine-$(CONFIG_ARCH_IOP3XX) := iop3xx + machine-$(CONFIG_ARCH_IOP32X) := iop32x + machine-$(CONFIG_ARCH_IOP33X) := iop33x machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_IXP2000) := ixp2000 machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx @@ -157,6 +163,7 @@ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ # If we have a common platform directory, then include it in the build. +core-$(CONFIG_PLAT_IOP) += arch/arm/plat-iop/ core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/ drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 2adc1527e0e..adddc713168 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -51,7 +51,11 @@ OBJS += head-at91rm9200.o endif ifeq ($(CONFIG_CPU_BIG_ENDIAN),y) +ifeq ($(CONFIG_CPU_CP15),y) OBJS += big-endian.o +else +# The endian should be set by h/w design. +endif endif # diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 14a9ff9c68d..e5ab51b9cce 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -20,11 +20,21 @@ #ifdef DEBUG #if defined(CONFIG_DEBUG_ICEDCC) + +#ifdef CONFIG_CPU_V6 + .macro loadsp, rb + .endm + .macro writeb, ch, rb + mcr p14, 0, \ch, c0, c5, 0 + .endm +#else .macro loadsp, rb .endm .macro writeb, ch, rb mcr p14, 0, \ch, c0, c1, 0 .endm +#endif + #else #include <asm/arch/debug-macro.S> @@ -42,12 +52,6 @@ add \rb, \rb, #0x00010000 @ Ser1 #endif .endm -#elif defined(CONFIG_ARCH_IOP331) - .macro loadsp, rb - mov \rb, #0xff000000 - orr \rb, \rb, #0x00ff0000 - orr \rb, \rb, #0x0000f700 @ location of the UART - .endm #elif defined(CONFIG_ARCH_S3C2410) .macro loadsp, rb mov \rb, #0x50000000 @@ -78,9 +82,11 @@ kphex r6, 8 /* processor id */ kputc #':' kphex r7, 8 /* architecture id */ +#ifdef CONFIG_CPU_CP15 kputc #':' mrc p15, 0, r0, c1, c0 kphex r0, 8 /* control reg */ +#endif kputc #'\n' kphex r5, 8 /* decompressed kernel start */ kputc #'-' @@ -503,7 +509,11 @@ call_kernel: bl cache_clean_flush */ call_cache_fn: adr r12, proc_types +#ifdef CONFIG_CPU_CP15 mrc p15, 0, r6, c0, c0 @ get processor ID +#else + ldr r6, =CONFIG_PROCESSOR_ID +#endif 1: ldr r1, [r12, #0] @ get value ldr r2, [r12, #4] @ get mask eor r1, r1, r6 @ (real ^ match) diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index ace3fb5835d..283891c736c 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -30,6 +30,25 @@ static void putstr(const char *ptr); #include <asm/arch/uncompress.h> #ifdef CONFIG_DEBUG_ICEDCC + +#ifdef CONFIG_CPU_V6 + +static void icedcc_putc(int ch) +{ + int status, i = 0x4000000; + + do { + if (--i < 0) + return; + + asm volatile ("mrc p14, 0, %0, c0, c1, 0" : "=r" (status)); + } while (status & (1 << 29)); + + asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch)); +} + +#else + static void icedcc_putc(int ch) { int status, i = 0x4000000; @@ -44,6 +63,8 @@ static void icedcc_putc(int ch) asm("mcr p14, 0, %0, c1, c0, 0" : : "r" (ch)); } +#endif + #define putc(ch) icedcc_putc(ch) #define flush() do { } while (0) #endif diff --git a/arch/arm/common/icst307.c b/arch/arm/common/icst307.c index bafe8b19be8..6d094c15754 100644 --- a/arch/arm/common/icst307.c +++ b/arch/arm/common/icst307.c @@ -57,7 +57,7 @@ icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq) break; } while (i < ARRAY_SIZE(idx2s)); - if (i > ARRAY_SIZE(idx2s)) + if (i >= ARRAY_SIZE(idx2s)) return vco; vco.s = idx2s[i]; @@ -119,7 +119,7 @@ icst307_ps_to_vco(const struct icst307_params *p, unsigned long period) break; } while (i < ARRAY_SIZE(idx2s)); - if (i > ARRAY_SIZE(idx2s)) + if (i >= ARRAY_SIZE(idx2s)) return vco; vco.s = idx2s[i]; diff --git a/arch/arm/common/icst525.c b/arch/arm/common/icst525.c index 943ef88c037..3d377c5bdef 100644 --- a/arch/arm/common/icst525.c +++ b/arch/arm/common/icst525.c @@ -55,7 +55,7 @@ icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq) break; } while (i < ARRAY_SIZE(idx2s)); - if (i > ARRAY_SIZE(idx2s)) + if (i >= ARRAY_SIZE(idx2s)) return vco; vco.s = idx2s[i]; @@ -118,7 +118,7 @@ icst525_ps_to_vco(const struct icst525_params *p, unsigned long period) break; } while (i < ARRAY_SIZE(idx2s)); - if (i > ARRAY_SIZE(idx2s)) + if (i >= ARRAY_SIZE(idx2s)) return vco; vco.s = idx2s[i]; diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 4e0dcaef6eb..181ef1ead5b 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -121,6 +121,13 @@ static struct locomo_dev_info locomo_devices[] = { .offset = 0, .length = 0, }, + { + .devid = LOCOMO_DEVID_SPI, + .irq = {}, + .name = "locomo-spi", + .offset = LOCOMO_SPI, + .length = 0x30, + }, }; @@ -374,7 +381,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc, struct irqdesc *d; void __iomem *mapbase = get_irq_chipdata(irq); - req = locomo_readl(mapbase + LOCOMO_SPIIR) & 0x000F; + req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F; if (req) { irq = LOCOMO_IRQ_SPI_START; d = irq_desc + irq; @@ -391,35 +398,35 @@ static void locomo_spi_ack_irq(unsigned int irq) { void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; - r = locomo_readl(mapbase + LOCOMO_SPIWE); + r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE); r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START)); - locomo_writel(r, mapbase + LOCOMO_SPIWE); + locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE); - r = locomo_readl(mapbase + LOCOMO_SPIIS); + r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIS); r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START)); - locomo_writel(r, mapbase + LOCOMO_SPIIS); + locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIS); - r = locomo_readl(mapbase + LOCOMO_SPIWE); + r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE); r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START)); - locomo_writel(r, mapbase + LOCOMO_SPIWE); + locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE); } static void locomo_spi_mask_irq(unsigned int irq) { void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; - r = locomo_readl(mapbase + LOCOMO_SPIIE); + r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE); r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START)); - locomo_writel(r, mapbase + LOCOMO_SPIIE); + locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE); } static void locomo_spi_unmask_irq(unsigned int irq) { void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; - r = locomo_readl(mapbase + LOCOMO_SPIIE); + r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE); r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START)); - locomo_writel(r, mapbase + LOCOMO_SPIIE); + locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE); } static struct irq_chip locomo_spi_chip = { @@ -814,12 +821,15 @@ static inline struct locomo *locomo_chip_driver(struct locomo_dev *ldev) return (struct locomo *)dev_get_drvdata(ldev->dev.parent); } -void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned int dir) +void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir) { - struct locomo *lchip = locomo_chip_driver(ldev); + struct locomo *lchip = dev_get_drvdata(dev); unsigned long flags; unsigned int r; + if (!lchip) + return; + spin_lock_irqsave(&lchip->lock, flags); r = locomo_readl(lchip->base + LOCOMO_GPD); @@ -836,12 +846,15 @@ void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned in spin_unlock_irqrestore(&lchip->lock, flags); } -unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits) +int locomo_gpio_read_level(struct device *dev, unsigned int bits) { - struct locomo *lchip = locomo_chip_driver(ldev); + struct locomo *lchip = dev_get_drvdata(dev); unsigned long flags; unsigned int ret; + if (!lchip) + return -ENODEV; + spin_lock_irqsave(&lchip->lock, flags); ret = locomo_readl(lchip->base + LOCOMO_GPL); spin_unlock_irqrestore(&lchip->lock, flags); @@ -850,12 +863,15 @@ unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits) return ret; } -unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits) +int locomo_gpio_read_output(struct device *dev, unsigned int bits) { - struct locomo *lchip = locomo_chip_driver(ldev); + struct locomo *lchip = dev_get_drvdata(dev); unsigned long flags; unsigned int ret; + if (!lchip) + return -ENODEV; + spin_lock_irqsave(&lchip->lock, flags); ret = locomo_readl(lchip->base + LOCOMO_GPO); spin_unlock_irqrestore(&lchip->lock, flags); @@ -864,12 +880,15 @@ unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits) return ret; } -void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int set) +void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set) { - struct locomo *lchip = locomo_chip_driver(ldev); + struct locomo *lchip = dev_get_drvdata(dev); unsigned long flags; unsigned int r; + if (!lchip) + return; + spin_lock_irqsave(&lchip->lock, flags); r = locomo_readl(lchip->base + LOCOMO_GPO); @@ -1058,9 +1077,9 @@ void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf) struct locomo *lchip = locomo_chip_driver(dev); if (vr) - locomo_gpio_write(dev, LOCOMO_GPIO_FL_VR, 1); + locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 1); else - locomo_gpio_write(dev, LOCOMO_GPIO_FL_VR, 0); + locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 0); spin_lock_irqsave(&lchip->lock, flags); locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 59b5ddec480..f412dedda68 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -40,6 +40,7 @@ #define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ #define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ #define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ + #define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ #define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ #define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ @@ -575,6 +576,9 @@ static int corgi_pxa_pm_enter(suspend_state_t state) while (corgi_enter_suspend(alarm_time,alarm_status,state)) {} + if (sharpsl_pm.machinfo->earlyresume) + sharpsl_pm.machinfo->earlyresume(); + dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n"); return 0; diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 2948b4589a8..3b4802a849e 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -126,6 +126,7 @@ CONFIG_CRUNCH=y # EP93xx Platforms # CONFIG_MACH_EDB9302=y +CONFIG_MACH_EDB9312=y CONFIG_MACH_EDB9315=y CONFIG_MACH_EDB9315A=y CONFIG_MACH_GESBC9312=y diff --git a/arch/arm/configs/ep80219_defconfig b/arch/arm/configs/iop32x_defconfig index 3c73b707c2f..0d67f66e78c 100644 --- a/arch/arm/configs/ep80219_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -1,50 +1,63 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 22:34:12 2005 +# Linux kernel version: 2.6.18-rc7 +# Tue Sep 19 00:30:18 2006 # CONFIG_ARM=y CONFIG_MMU=y -CONFIG_UID16=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -52,24 +65,52 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # +# Block layer +# +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -CONFIG_ARCH_IOP3XX=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +CONFIG_ARCH_IOP32X=y +# CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set @@ -77,28 +118,19 @@ CONFIG_ARCH_IOP3XX=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set # -# IOP3xx Implementation Options +# IOP32x Implementation Options # # -# IOP3xx Platform Types +# IOP32x Platform Types # -# CONFIG_ARCH_IQ80321 is not set +CONFIG_MACH_GLANTANK=y +CONFIG_ARCH_IQ80321=y CONFIG_ARCH_IQ31244=y -# CONFIG_ARCH_IQ80331 is not set -# CONFIG_MACH_IQ80332 is not set -CONFIG_ARCH_EP80219=y -CONFIG_ARCH_IOP321=y -# CONFIG_ARCH_IOP331 is not set - -# -# IOP3xx Chipset Features -# +CONFIG_MACH_N2100=y +CONFIG_PLAT_IOP=y # # Processor Type @@ -109,7 +141,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -121,8 +152,7 @@ CONFIG_XSCALE_PMU=y # Bus support # CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -133,6 +163,19 @@ CONFIG_PCI_NAMES=y # Kernel Features # # CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set CONFIG_ALIGNMENT_TRAP=y # @@ -140,7 +183,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200" +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp" # CONFIG_XIP_KERNEL is not set # @@ -166,6 +209,93 @@ CONFIG_BINFMT_AOUT=y # Power management options # # CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -177,6 +307,13 @@ CONFIG_BINFMT_AOUT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -200,6 +337,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -225,18 +363,18 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xf0000000 -CONFIG_MTD_PHYSMAP_LEN=0x00800000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -245,7 +383,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -261,6 +398,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -272,7 +414,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -284,17 +425,9 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -305,6 +438,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -316,6 +450,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -330,10 +465,12 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -344,25 +481,19 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set @@ -377,8 +508,7 @@ CONFIG_BLK_DEV_MD=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=y -# CONFIG_MD_RAID6 is not set +# CONFIG_MD_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y @@ -392,6 +522,9 @@ CONFIG_BLK_DEV_DM=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -404,71 +537,8 @@ CONFIG_BLK_DEV_DM=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -481,14 +551,21 @@ CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -526,16 +603,23 @@ CONFIG_E1000_NAPI=y # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -558,6 +642,8 @@ CONFIG_E1000_NAPI=y # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -595,7 +681,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -603,6 +688,7 @@ CONFIG_SOUND_GAMEPORT=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -610,7 +696,9 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -618,6 +706,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -631,8 +720,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -647,6 +736,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -671,14 +761,13 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set CONFIG_I2C_IOP3XX=y -# CONFIG_I2C_ISA is not set # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -689,15 +778,45 @@ CONFIG_I2C_IOP3XX=y # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus # -# CONFIG_I2C_SENSOR is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -712,36 +831,45 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support +# Misc devices # -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # -# Misc devices +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers # # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -751,6 +879,7 @@ CONFIG_I2C_IOP3XX=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # @@ -758,6 +887,7 @@ CONFIG_I2C_IOP3XX=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -769,7 +899,125 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set + +# +# USB DSL modem support +# # # USB Gadget Support @@ -782,10 +1030,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -795,22 +1050,22 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set CONFIG_XFS_FS=y -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -830,12 +1085,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -850,8 +1103,9 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -868,16 +1122,19 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -886,6 +1143,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -905,6 +1163,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -921,11 +1180,34 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +# CONFIG_FORCED_INLINING is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set # # Security options @@ -946,7 +1228,9 @@ CONFIG_DEBUG_USER=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y diff --git a/arch/arm/configs/iq80332_defconfig b/arch/arm/configs/iop33x_defconfig index 11959b705d8..2a8fc153969 100644 --- a/arch/arm/configs/iq80332_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -1,50 +1,63 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 17:33:39 2005 +# Linux kernel version: 2.6.18-rc7 +# Tue Sep 19 00:30:42 2006 # CONFIG_ARM=y CONFIG_MMU=y -CONFIG_UID16=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -52,24 +65,52 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # +# Block layer +# +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -CONFIG_ARCH_IOP3XX=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +CONFIG_ARCH_IOP33X=y # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set @@ -77,28 +118,17 @@ CONFIG_ARCH_IOP3XX=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set # -# IOP3xx Implementation Options +# IOP33x Implementation Options # # -# IOP3xx Platform Types +# IOP33x Platform Types # -# CONFIG_ARCH_IQ80321 is not set -# CONFIG_ARCH_IQ31244 is not set -# CONFIG_ARCH_IQ80331 is not set +CONFIG_ARCH_IQ80331=y CONFIG_MACH_IQ80332=y -# CONFIG_ARCH_EP80219 is not set -CONFIG_ARCH_IOP331=y - -# -# IOP3xx Chipset Features -# -# CONFIG_IOP331_STEPD is not set +CONFIG_PLAT_IOP=y # # Processor Type @@ -109,7 +139,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -121,8 +150,7 @@ CONFIG_XSCALE_PMU=y # Bus support # CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -133,6 +161,19 @@ CONFIG_PCI_NAMES=y # Kernel Features # # CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set CONFIG_ALIGNMENT_TRAP=y # @@ -140,7 +181,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200" +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp" # CONFIG_XIP_KERNEL is not set # @@ -166,6 +207,93 @@ CONFIG_BINFMT_AOUT=y # Power management options # # CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -177,6 +305,13 @@ CONFIG_BINFMT_AOUT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -200,6 +335,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -222,6 +358,7 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set @@ -229,18 +366,18 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xc0000000 -CONFIG_MTD_PHYSMAP_LEN=0x00800000 +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -249,7 +386,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -265,6 +401,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -276,7 +417,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -288,17 +428,9 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -309,6 +441,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -320,6 +453,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -334,10 +468,12 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -348,25 +484,19 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set @@ -381,8 +511,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=y -# CONFIG_MD_RAID6 is not set +# CONFIG_MD_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y @@ -396,6 +525,9 @@ CONFIG_BLK_DEV_DM=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -408,71 +540,8 @@ CONFIG_BLK_DEV_DM=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - +# Network device support # -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -485,6 +554,10 @@ CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set # +# PHY device support +# + +# # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set @@ -501,14 +574,20 @@ CONFIG_E1000_NAPI=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -531,6 +610,8 @@ CONFIG_E1000_NAPI=y # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -568,7 +649,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -576,6 +656,7 @@ CONFIG_SOUND_GAMEPORT=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -583,7 +664,9 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -591,6 +674,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -604,8 +688,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -620,6 +704,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -644,14 +729,13 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set CONFIG_I2C_IOP3XX=y -# CONFIG_I2C_ISA is not set # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -662,15 +746,45 @@ CONFIG_I2C_IOP3XX=y # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -# CONFIG_I2C_SENSOR is not set +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -685,36 +799,45 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support +# Misc devices # -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # -# Misc devices +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers # # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -724,6 +847,7 @@ CONFIG_I2C_IOP3XX=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # @@ -731,6 +855,7 @@ CONFIG_I2C_IOP3XX=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -742,9 +867,14 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -755,10 +885,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -768,22 +905,22 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set CONFIG_XFS_FS=y -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -803,12 +940,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -834,16 +969,19 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -852,6 +990,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -871,6 +1010,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -887,11 +1027,34 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +# CONFIG_FORCED_INLINING is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set # # Security options @@ -912,5 +1075,7 @@ CONFIG_DEBUG_USER=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set # CONFIG_CRC32 is not set # CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y diff --git a/arch/arm/configs/iq31244_defconfig b/arch/arm/configs/iq31244_defconfig deleted file mode 100644 index 32467160a6d..00000000000 --- a/arch/arm/configs/iq31244_defconfig +++ /dev/null @@ -1,922 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 02:10:38 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -CONFIG_ARCH_IOP3XX=y -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set - -# -# IOP3xx Implementation Options -# - -# -# IOP3xx Platform Types -# -# CONFIG_ARCH_IQ80321 is not set -CONFIG_ARCH_IQ31244=y -# CONFIG_ARCH_IQ80331 is not set -# CONFIG_MACH_IQ80332 is not set -# CONFIG_ARCH_EP80219 is not set -CONFIG_ARCH_IOP321=y -# CONFIG_ARCH_IOP331 is not set - -# -# IOP3xx Chipset Features -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xf0000000 -CONFIG_MTD_PHYSMAP_LEN=0x00800000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -# CONFIG_MD_LINEAR is not set -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=y -# CONFIG_MD_RAID6 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_CRYPT is not set -# CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=y -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -CONFIG_I2C_IOP3XX=y -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -CONFIG_XFS_FS=y -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/iq80321_defconfig b/arch/arm/configs/iq80321_defconfig deleted file mode 100644 index b000da753c4..00000000000 --- a/arch/arm/configs/iq80321_defconfig +++ /dev/null @@ -1,843 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 13:24:10 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -CONFIG_ARCH_IOP3XX=y -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set - -# -# IOP3xx Implementation Options -# - -# -# IOP3xx Platform Types -# -CONFIG_ARCH_IQ80321=y -# CONFIG_ARCH_IQ31244 is not set -# CONFIG_ARCH_IQ80331 is not set -# CONFIG_MACH_IQ80332 is not set -# CONFIG_ARCH_EP80219 is not set -CONFIG_ARCH_IOP321=y -# CONFIG_ARCH_IOP331 is not set - -# -# IOP3xx Chipset Features -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xf0000000 -CONFIG_MTD_PHYSMAP_LEN=0x00800000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=y -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -CONFIG_I2C_IOP3XX=y -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -CONFIG_XFS_FS=y -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/iq80331_defconfig b/arch/arm/configs/iq80331_defconfig deleted file mode 100644 index 46c79e1efe0..00000000000 --- a/arch/arm/configs/iq80331_defconfig +++ /dev/null @@ -1,916 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 15:13:37 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -CONFIG_ARCH_IOP3XX=y -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set - -# -# IOP3xx Implementation Options -# - -# -# IOP3xx Platform Types -# -# CONFIG_ARCH_IQ80321 is not set -# CONFIG_ARCH_IQ31244 is not set -CONFIG_ARCH_IQ80331=y -# CONFIG_MACH_IQ80332 is not set -# CONFIG_ARCH_EP80219 is not set -CONFIG_ARCH_IOP331=y - -# -# IOP3xx Chipset Features -# -CONFIG_IOP331_STEPD=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_GEOMETRY is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xc0000000 -CONFIG_MTD_PHYSMAP_LEN=0x00800000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=y -# CONFIG_MD_RAID6 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_CRYPT is not set -# CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=y -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -CONFIG_I2C_IOP3XX=y -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -CONFIG_XFS_FS=y -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC32 is not set -# CONFIG_LIBCRC32C is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index f20814e6f49..a8322264104 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,14 +1,19 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-git9 -# Sun Jun 25 23:56:32 2006 +# Linux kernel version: 2.6.18 +# Wed Sep 20 20:27:31 2006 # CONFIG_ARM=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -26,14 +31,15 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -46,6 +52,8 @@ CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -84,7 +92,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set @@ -94,7 +102,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set @@ -122,13 +131,18 @@ CONFIG_ARCH_SMDK2410=y CONFIG_ARCH_S3C2440=y CONFIG_SMDK2440_CPU2440=y CONFIG_SMDK2440_CPU2442=y +CONFIG_MACH_S3C2413=y CONFIG_MACH_SMDK2413=y CONFIG_MACH_VR1000=y CONFIG_MACH_RX3715=y CONFIG_MACH_OTOM=y CONFIG_MACH_NEXCODER_2440=y +CONFIG_MACH_VSTMS=y CONFIG_S3C2410_CLOCK=y +CONFIG_S3C2410_PM=y +CONFIG_CPU_S3C2410_DMA=y CONFIG_CPU_S3C2410=y +CONFIG_S3C2412_PM=y CONFIG_CPU_S3C2412=y CONFIG_CPU_S3C244X=y CONFIG_CPU_S3C2440=y @@ -156,7 +170,7 @@ CONFIG_S3C2410_LOWLEVEL_UART_PORT=0 CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v4=y +CONFIG_CPU_32v4T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV4T=y CONFIG_CPU_ABRT_EV5TJ=y @@ -200,6 +214,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set CONFIG_ALIGNMENT_TRAP=y # @@ -304,7 +319,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -460,6 +474,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m @@ -640,6 +655,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set @@ -716,6 +732,7 @@ CONFIG_S3C2410_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_S3C2410_RTC=y # CONFIG_DTLK is not set @@ -857,12 +874,12 @@ CONFIG_VIDEO_V4L2=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set -CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set @@ -995,7 +1012,7 @@ CONFIG_USB_MON=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set -# CONFIG_USB_CY7C63 is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set @@ -1095,6 +1112,7 @@ CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -1202,14 +1220,19 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y @@ -1251,3 +1274,4 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c index 33c55689f99..ecf4f9472d9 100644 --- a/arch/arm/kernel/apm.c +++ b/arch/arm/kernel/apm.c @@ -25,6 +25,7 @@ #include <linux/list.h> #include <linux/init.h> #include <linux/completion.h> +#include <linux/kthread.h> #include <asm/apm.h> /* apm_power_info */ #include <asm/system.h> @@ -80,7 +81,7 @@ struct apm_user { */ static int suspends_pending; static int apm_disabled; -static int arm_apm_active; +static struct task_struct *kapmd_tsk; static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue); static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue); @@ -97,7 +98,6 @@ static LIST_HEAD(apm_user_list); * to be suspending the system. */ static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait); -static DECLARE_COMPLETION(kapmd_exit); static DEFINE_SPINLOCK(kapmd_queue_lock); static struct apm_queue kapmd_queue; @@ -468,16 +468,13 @@ static int apm_get_info(char *buf, char **start, off_t fpos, int length) static int kapmd(void *arg) { - daemonize("kapmd"); - current->flags |= PF_NOFREEZE; - do { apm_event_t event; wait_event_interruptible(kapmd_wait, - !queue_empty(&kapmd_queue) || !arm_apm_active); + !queue_empty(&kapmd_queue) || kthread_should_stop()); - if (!arm_apm_active) + if (kthread_should_stop()) break; spin_lock_irq(&kapmd_queue_lock); @@ -508,7 +505,7 @@ static int kapmd(void *arg) } } while (1); - complete_and_exit(&kapmd_exit, 0); + return 0; } static int __init apm_init(void) @@ -520,13 +517,14 @@ static int __init apm_init(void) return -ENODEV; } - arm_apm_active = 1; - - ret = kernel_thread(kapmd, NULL, CLONE_KERNEL); - if (ret < 0) { - arm_apm_active = 0; + kapmd_tsk = kthread_create(kapmd, NULL, "kapmd"); + if (IS_ERR(kapmd_tsk)) { + ret = PTR_ERR(kapmd_tsk); + kapmd_tsk = NULL; return ret; } + kapmd_tsk->flags |= PF_NOFREEZE; + wake_up_process(kapmd_tsk); #ifdef CONFIG_PROC_FS create_proc_info_entry("apm", 0, NULL, apm_get_info); @@ -535,10 +533,7 @@ static int __init apm_init(void) ret = misc_register(&apm_device); if (ret != 0) { remove_proc_entry("apm", NULL); - - arm_apm_active = 0; - wake_up(&kapmd_wait); - wait_for_completion(&kapmd_exit); + kthread_stop(kapmd_tsk); } return ret; @@ -549,9 +544,7 @@ static void __exit apm_exit(void) misc_deregister(&apm_device); remove_proc_entry("apm", NULL); - arm_apm_active = 0; - wake_up(&kapmd_wait); - wait_for_completion(&kapmd_exit); + kthread_stop(kapmd_tsk); } module_init(apm_init); diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index a5747e58a9d..5617566477b 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -21,6 +21,36 @@ #if defined(CONFIG_DEBUG_ICEDCC) @@ debug using ARM EmbeddedICE DCC channel + +#if defined(CONFIG_CPU_V6) + + .macro addruart, rx + .endm + + .macro senduart, rd, rx + mcr p14, 0, \rd, c0, c5, 0 + .endm + + .macro busyuart, rd, rx +1001: + mrc p14, 0, \rx, c0, c1, 0 + tst \rx, #0x20000000 + beq 1001b + .endm + + .macro waituart, rd, rx + mov \rd, #0x2000000 +1001: + subs \rd, \rd, #1 + bmi 1002f + mrc p14, 0, \rx, c0, c1, 0 + tst \rx, #0x20000000 + bne 1001b +1002: + .endm + +#else + .macro addruart, rx .endm @@ -46,9 +76,12 @@ bne 1001b 1002: .endm + +#endif /* CONFIG_CPU_V6 */ + #else #include <asm/arch/debug-macro.S> -#endif +#endif /* CONFIG_DEBUG_ICEDCC */ /* * Useful debugging routines diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index de4e3313790..bd623b73445 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -191,6 +191,9 @@ __dabt_svc: __irq_svc: svc_entry +#ifdef CONFIG_TRACE_IRQFLAGS + bl trace_hardirqs_off +#endif #ifdef CONFIG_PREEMPT get_thread_info tsk ldr r8, [tsk, #TI_PREEMPT] @ get preempt count @@ -211,6 +214,10 @@ preempt_return: #endif ldr r0, [sp, #S_PSR] @ irqs are already disabled msr spsr_cxsf, r0 +#ifdef CONFIG_TRACE_IRQFLAGS + tst r0, #PSR_I_BIT + bleq trace_hardirqs_on +#endif ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr .ltorg @@ -398,6 +405,9 @@ __dabt_usr: __irq_usr: usr_entry +#ifdef CONFIG_TRACE_IRQFLAGS + bl trace_hardirqs_off +#endif get_thread_info tsk #ifdef CONFIG_PREEMPT ldr r8, [tsk, #TI_PREEMPT] @ get preempt count @@ -412,6 +422,9 @@ __irq_usr: teq r0, r7 strne r0, [r0, -r0] #endif +#ifdef CONFIG_TRACE_IRQFLAGS + bl trace_hardirqs_on +#endif mov why, #0 b ret_to_user diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index ac9eb3d3051..f359a189dcf 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -9,7 +9,6 @@ * published by the Free Software Foundation. * * Common kernel startup code (non-paged MM) - * for 32-bit CPUs which has a process ID register(CP15). * */ #include <linux/linkage.h> @@ -40,7 +39,11 @@ ENTRY(stext) msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode @ and irqs disabled +#ifndef CONFIG_CPU_CP15 + ldr r9, =CONFIG_PROCESSOR_ID +#else mrc p15, 0, r9, c0, c0 @ get processor id +#endif bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? beq __error_p @ yes, error 'p' @@ -58,6 +61,7 @@ ENTRY(stext) */ .type __after_proc_init, %function __after_proc_init: +#ifdef CONFIG_CPU_CP15 mrc p15, 0, r0, c1, c0, 0 @ read control reg #ifdef CONFIG_ALIGNMENT_TRAP orr r0, r0, #CR_A @@ -73,7 +77,13 @@ __after_proc_init: #ifdef CONFIG_CPU_ICACHE_DISABLE bic r0, r0, #CR_I #endif +#ifdef CONFIG_CPU_HIGH_VECTOR + orr r0, r0, #CR_V +#else + bic r0, r0, #CR_V +#endif mcr p15, 0, r0, c1, c0, 0 @ write control reg +#endif /* CONFIG_CPU_CP15 */ mov pc, r13 @ clear the BSS and jump @ to start_kernel diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 298363d9704..1b061583408 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -2,6 +2,7 @@ * linux/arch/arm/kernel/module.c * * Copyright (C) 2002 Russell King. + * Modified for nommu by Hyok S. Choi * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -32,6 +33,7 @@ extern void _etext; #define MODULE_START (((unsigned long)&_etext + ~PGDIR_MASK) & PGDIR_MASK) #endif +#ifdef CONFIG_MMU void *module_alloc(unsigned long size) { struct vm_struct *area; @@ -46,6 +48,12 @@ void *module_alloc(unsigned long size) return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL); } +#else /* CONFIG_MMU */ +void *module_alloc(unsigned long size) +{ + return size == 0 ? NULL : vmalloc(size); +} +#endif /* !CONFIG_MMU */ void module_free(struct module *module, void *region) { diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 3079535afcc..bf35c178a87 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -221,16 +221,26 @@ void __show_regs(struct pt_regs *regs) processor_modes[processor_mode(regs)], thumb_mode(regs) ? " (T)" : "", get_fs() == get_ds() ? "kernel" : "user"); +#if CONFIG_CPU_CP15 { - unsigned int ctrl, transbase, dac; + unsigned int ctrl; __asm__ ( " mrc p15, 0, %0, c1, c0\n" - " mrc p15, 0, %1, c2, c0\n" - " mrc p15, 0, %2, c3, c0\n" - : "=r" (ctrl), "=r" (transbase), "=r" (dac)); - printk("Control: %04X Table: %08X DAC: %08X\n", - ctrl, transbase, dac); + : "=r" (ctrl)); + printk("Control: %04X\n", ctrl); } +#ifdef CONFIG_CPU_CP15_MMU + { + unsigned int transbase, dac; + __asm__ ( + " mrc p15, 0, %0, c2, c0\n" + " mrc p15, 0, %1, c3, c0\n" + : "=r" (transbase), "=r" (dac)); + printk("Table: %08X DAC: %08X\n", + transbase, dac); + } +#endif +#endif } void show_regs(struct pt_regs * regs) diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 09a67d77185..d4dceb5f06e 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -69,10 +69,12 @@ EXPORT_SYMBOL(profile_pc); */ int (*set_rtc)(void); +#ifndef CONFIG_GENERIC_TIME static unsigned long dummy_gettimeoffset(void) { return 0; } +#endif /* * Scheduler clock - returns current time in nanosec units. @@ -230,6 +232,7 @@ static inline void do_leds(void) #define do_leds() #endif +#ifndef CONFIG_GENERIC_TIME void do_gettimeofday(struct timeval *tv) { unsigned long flags; @@ -291,6 +294,7 @@ int do_settimeofday(struct timespec *tv) } EXPORT_SYMBOL(do_settimeofday); +#endif /* !CONFIG_GENERIC_TIME */ /** * save_time_delta - Save the offset between system time and RTC time @@ -500,8 +504,10 @@ device_initcall(timer_init_sysfs); void __init time_init(void) { +#ifndef CONFIG_GENERIC_TIME if (system_timer->offset == NULL) system_timer->offset = dummy_gettimeoffset; +#endif system_timer->init(); #ifdef CONFIG_NO_IDLE_HZ diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index aeeed806f99..bede380c07a 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -191,7 +191,7 @@ void show_stack(struct task_struct *tsk, unsigned long *sp) if (tsk != current) fp = thread_saved_fp(tsk); else - asm("mov%? %0, fp" : "=r" (fp)); + asm("mov %0, fp" : "=r" (fp) : : "cc"); c_backtrace(fp, 0x10); barrier(); diff --git a/arch/arm/mach-at91rm9200/at91rm9200.c b/arch/arm/mach-at91rm9200/at91rm9200.c index 0985b1c42c7..dcf6136fedf 100644 --- a/arch/arm/mach-at91rm9200/at91rm9200.c +++ b/arch/arm/mach-at91rm9200/at91rm9200.c @@ -17,6 +17,7 @@ #include <asm/hardware.h> #include "generic.h" +#include "clock.h" static struct map_desc at91rm9200_io_desc[] __initdata = { { @@ -26,87 +27,224 @@ static struct map_desc at91rm9200_io_desc[] __initdata = { .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_SPI, - .pfn = __phys_to_pfn(AT91_BASE_SPI), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_SSC2, - .pfn = __phys_to_pfn(AT91_BASE_SSC2), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_SSC1, - .pfn = __phys_to_pfn(AT91_BASE_SSC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_SSC0, - .pfn = __phys_to_pfn(AT91_BASE_SSC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_US3, - .pfn = __phys_to_pfn(AT91_BASE_US3), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_US2, - .pfn = __phys_to_pfn(AT91_BASE_US2), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_US1, - .pfn = __phys_to_pfn(AT91_BASE_US1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_US0, - .pfn = __phys_to_pfn(AT91_BASE_US0), + .pfn = __phys_to_pfn(AT91RM9200_BASE_SPI), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_EMAC, - .pfn = __phys_to_pfn(AT91_BASE_EMAC), + .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_TWI, - .pfn = __phys_to_pfn(AT91_BASE_TWI), + .pfn = __phys_to_pfn(AT91RM9200_BASE_TWI), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_MCI, - .pfn = __phys_to_pfn(AT91_BASE_MCI), + .pfn = __phys_to_pfn(AT91RM9200_BASE_MCI), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_UDP, - .pfn = __phys_to_pfn(AT91_BASE_UDP), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_TCB1, - .pfn = __phys_to_pfn(AT91_BASE_TCB1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_TCB0, - .pfn = __phys_to_pfn(AT91_BASE_TCB0), + .pfn = __phys_to_pfn(AT91RM9200_BASE_UDP), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_SRAM_VIRT_BASE, - .pfn = __phys_to_pfn(AT91_SRAM_BASE), - .length = AT91_SRAM_SIZE, + .pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE), + .length = AT91RM9200_SRAM_SIZE, .type = MT_DEVICE, }, }; -void __init at91rm9200_map_io(void) +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ +static struct clk udc_clk = { + .name = "udc_clk", + .pmc_mask = 1 << AT91RM9200_ID_UDP, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ohci_clk = { + .name = "ohci_clk", + .pmc_mask = 1 << AT91RM9200_ID_UHP, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ether_clk = { + .name = "ether_clk", + .pmc_mask = 1 << AT91RM9200_ID_EMAC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc_clk = { + .name = "mci_clk", + .pmc_mask = 1 << AT91RM9200_ID_MCI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi_clk = { + .name = "twi_clk", + .pmc_mask = 1 << AT91RM9200_ID_TWI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pmc_mask = 1 << AT91RM9200_ID_US0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pmc_mask = 1 << AT91RM9200_ID_US1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pmc_mask = 1 << AT91RM9200_ID_US2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart3_clk = { + .name = "usart3_clk", + .pmc_mask = 1 << AT91RM9200_ID_US3, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi_clk = { + .name = "spi_clk", + .pmc_mask = 1 << AT91RM9200_ID_SPI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioA_clk = { + .name = "pioA_clk", + .pmc_mask = 1 << AT91RM9200_ID_PIOA, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioB_clk = { + .name = "pioB_clk", + .pmc_mask = 1 << AT91RM9200_ID_PIOB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioC_clk = { + .name = "pioC_clk", + .pmc_mask = 1 << AT91RM9200_ID_PIOC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioD_clk = { + .name = "pioD_clk", + .pmc_mask = 1 << AT91RM9200_ID_PIOD, + .type = CLK_TYPE_PERIPHERAL, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioA_clk, + &pioB_clk, + &pioC_clk, + &pioD_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &usart3_clk, + &mmc_clk, + &udc_clk, + &twi_clk, + &spi_clk, + // ssc 0 .. ssc2 + // tc0 .. tc5 + &ohci_clk, + ðer_clk, + // irq0 .. irq6 +}; + +/* + * The four programmable clocks. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; +static struct clk pck2 = { + .name = "pck2", + .pmc_mask = AT91_PMC_PCK2, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 2, +}; +static struct clk pck3 = { + .name = "pck3", + .pmc_mask = AT91_PMC_PCK3, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 3, +}; + +static void __init at91rm9200_register_clocks(void) { + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + + clk_register(&pck0); + clk_register(&pck1); + clk_register(&pck2); + clk_register(&pck3); +} + +/* -------------------------------------------------------------------- + * GPIO + * -------------------------------------------------------------------- */ + +static struct at91_gpio_bank at91rm9200_gpio[] = { + { + .id = AT91RM9200_ID_PIOA, + .offset = AT91_PIOA, + .clock = &pioA_clk, + }, { + .id = AT91RM9200_ID_PIOB, + .offset = AT91_PIOB, + .clock = &pioB_clk, + }, { + .id = AT91RM9200_ID_PIOC, + .offset = AT91_PIOC, + .clock = &pioC_clk, + }, { + .id = AT91RM9200_ID_PIOD, + .offset = AT91_PIOD, + .clock = &pioD_clk, + } +}; + +/* -------------------------------------------------------------------- + * AT91RM9200 processor initialization + * -------------------------------------------------------------------- */ +void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) +{ + /* Map peripherals */ iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); + + /* Init clock subsystem */ + at91_clock_init(main_clock); + + /* Register the processor-specific clocks */ + at91rm9200_register_clocks(); + + /* Initialize GPIO subsystem */ + at91_gpio_init(at91rm9200_gpio, banks); } + +/* -------------------------------------------------------------------- + * Interrupt initialization + * -------------------------------------------------------------------- */ + /* * The default interrupt priority levels (0 = lowest, 7 = highest). */ @@ -145,10 +283,14 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 0 /* Advanced Interrupt Controller (IRQ6) */ }; -void __init at91rm9200_init_irq(unsigned int priority[NR_AIC_IRQS]) +void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS]) { if (!priority) priority = at91rm9200_default_irq_priority; + /* Initialize the AIC interrupt controller */ at91_aic_init(priority); + + /* Enable GPIO interrupts */ + at91_gpio_irq_setup(); } diff --git a/arch/arm/mach-at91rm9200/board-1arm.c b/arch/arm/mach-at91rm9200/board-1arm.c index dc79e0992af..36eecd7161f 100644 --- a/arch/arm/mach-at91rm9200/board-1arm.c +++ b/arch/arm/mach-at91rm9200/board-1arm.c @@ -34,20 +34,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init onearm_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(PQFP_GPIO_BANKS); -} /* * Serial port configuration. @@ -62,15 +53,18 @@ static struct at91_uart_config __initdata onearm_uart_config = { static void __init onearm_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 18.432 MHz crystal */ - at91_clock_init(18432000); + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); /* Setup the serial ports and console */ at91_init_serial(&onearm_uart_config); } +static void __init onearm_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata onearm_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, diff --git a/arch/arm/mach-at91rm9200/board-carmeva.c b/arch/arm/mach-at91rm9200/board-carmeva.c index 2c138b542eb..50e513681ae 100644 --- a/arch/arm/mach-at91rm9200/board-carmeva.c +++ b/arch/arm/mach-at91rm9200/board-carmeva.c @@ -35,20 +35,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init carmeva_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(BGA_GPIO_BANKS); -} /* * Serial port configuration. @@ -63,15 +54,19 @@ static struct at91_uart_config __initdata carmeva_uart_config = { static void __init carmeva_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 20.000 MHz crystal */ - at91_clock_init(20000000); + /* Initialize processor: 20.000 MHz crystal */ + at91rm9200_initialize(20000000, AT91RM9200_BGA); /* Setup the serial ports and console */ at91_init_serial(&carmeva_uart_config); } +static void __init carmeva_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + + static struct at91_eth_data __initdata carmeva_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c index 794d3fbb449..8eeae491ce7 100644 --- a/arch/arm/mach-at91rm9200/board-csb337.c +++ b/arch/arm/mach-at91rm9200/board-csb337.c @@ -34,20 +34,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init csb337_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(BGA_GPIO_BANKS); -} /* * Serial port configuration. @@ -62,10 +53,8 @@ static struct at91_uart_config __initdata csb337_uart_config = { static void __init csb337_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 3.6864 MHz crystal */ - at91_clock_init(3686400); + /* Initialize processor: 3.6864 MHz crystal */ + at91rm9200_initialize(3686400, AT91RM9200_BGA); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -74,6 +63,11 @@ static void __init csb337_map_io(void) at91_init_serial(&csb337_uart_config); } +static void __init csb337_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata csb337_eth_data = { .phy_irq_pin = AT91_PIN_PC2, .is_rmii = 0, diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91rm9200/board-csb637.c index c8b6f334246..a29fa0e822c 100644 --- a/arch/arm/mach-at91rm9200/board-csb637.c +++ b/arch/arm/mach-at91rm9200/board-csb637.c @@ -33,20 +33,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init csb637_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(BGA_GPIO_BANKS); -} /* * Serial port configuration. @@ -61,10 +52,8 @@ static struct at91_uart_config __initdata csb637_uart_config = { static void __init csb637_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 3.6864 MHz crystal */ - at91_clock_init(3686400); + /* Initialize processor: 3.6864 MHz crystal */ + at91rm9200_initialize(3686400, AT91RM9200_BGA); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); @@ -73,6 +62,11 @@ static void __init csb637_map_io(void) at91_init_serial(&csb637_uart_config); } +static void __init csb637_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata csb637_eth_data = { .phy_irq_pin = AT91_PIN_PC0, .is_rmii = 0, diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c index 65873037e02..c699f3984d4 100644 --- a/arch/arm/mach-at91rm9200/board-dk.c +++ b/arch/arm/mach-at91rm9200/board-dk.c @@ -37,20 +37,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init dk_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(BGA_GPIO_BANKS); -} /* * Serial port configuration. @@ -65,10 +56,8 @@ static struct at91_uart_config __initdata dk_uart_config = { static void __init dk_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 18.432 MHz crystal */ - at91_clock_init(18432000); + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_BGA); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); @@ -77,6 +66,11 @@ static void __init dk_map_io(void) at91_init_serial(&dk_uart_config); } +static void __init dk_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata dk_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -128,6 +122,29 @@ static struct spi_board_info dk_spi_devices[] = { #endif }; +static struct mtd_partition __initdata dk_nand_partition[] = { + { + .name = "NAND Partition 1", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition *nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(dk_nand_partition); + return dk_nand_partition; +} + +static struct at91_nand_data __initdata dk_nand_data = { + .ale = 22, + .cle = 21, + .det_pin = AT91_PIN_PB1, + .rdy_pin = AT91_PIN_PC2, + // .enable_pin = ... not there + .partition_info = nand_partitions, +}; + static void __init dk_board_init(void) { /* Serial */ @@ -153,6 +170,8 @@ static void __init dk_board_init(void) at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ at91_add_device_mmc(&dk_mmc_data); #endif + /* NAND */ + at91_add_device_nand(&dk_nand_data); /* VGA */ // dk_add_device_video(); } diff --git a/arch/arm/mach-at91rm9200/board-eb9200.c b/arch/arm/mach-at91rm9200/board-eb9200.c index a3e2df968a6..c6e0d51fbea 100644 --- a/arch/arm/mach-at91rm9200/board-eb9200.c +++ b/arch/arm/mach-at91rm9200/board-eb9200.c @@ -35,20 +35,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init eb9200_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(BGA_GPIO_BANKS); -} /* * Serial port configuration. @@ -63,15 +54,18 @@ static struct at91_uart_config __initdata eb9200_uart_config = { static void __init eb9200_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 18.432 MHz crystal */ - at91_clock_init(18432000); + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_BGA); /* Setup the serial ports and console */ at91_init_serial(&eb9200_uart_config); } +static void __init eb9200_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata eb9200_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c index 868192351dd..830eb793217 100644 --- a/arch/arm/mach-at91rm9200/board-ek.c +++ b/arch/arm/mach-at91rm9200/board-ek.c @@ -37,20 +37,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init ek_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(BGA_GPIO_BANKS); -} /* * Serial port configuration. @@ -65,10 +56,8 @@ static struct at91_uart_config __initdata ek_uart_config = { static void __init ek_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 18.432 MHz crystal */ - at91_clock_init(18432000); + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_BGA); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); @@ -77,6 +66,11 @@ static void __init ek_map_io(void) at91_init_serial(&ek_uart_config); } +static void __init ek_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata ek_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, diff --git a/arch/arm/mach-at91rm9200/board-kafa.c b/arch/arm/mach-at91rm9200/board-kafa.c index bf760c5e0c4..91e301924f2 100644 --- a/arch/arm/mach-at91rm9200/board-kafa.c +++ b/arch/arm/mach-at91rm9200/board-kafa.c @@ -34,20 +34,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init kafa_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(PQFP_GPIO_BANKS); -} /* * Serial port configuration. @@ -62,10 +53,8 @@ static struct at91_uart_config __initdata kafa_uart_config = { static void __init kafa_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 18.432 MHz crystal */ - at91_clock_init(18432000); + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); @@ -74,6 +63,11 @@ static void __init kafa_map_io(void) at91_init_serial(&kafa_uart_config); } +static void __init kafa_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata kafa_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 0, diff --git a/arch/arm/mach-at91rm9200/board-kb9202.c b/arch/arm/mach-at91rm9200/board-kb9202.c index f06d2b54cc9..272fe43bcec 100644 --- a/arch/arm/mach-at91rm9200/board-kb9202.c +++ b/arch/arm/mach-at91rm9200/board-kb9202.c @@ -35,20 +35,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init kb9202_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(PQFP_GPIO_BANKS); -} /* * Serial port configuration. @@ -63,10 +54,8 @@ static struct at91_uart_config __initdata kb9202_uart_config = { static void __init kb9202_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 10 MHz crystal */ - at91_clock_init(10000000); + /* Initialize processor: 10 MHz crystal */ + at91rm9200_initialize(10000000, AT91RM9200_PQFP); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); @@ -75,6 +64,11 @@ static void __init kb9202_map_io(void) at91_init_serial(&kb9202_uart_config); } +static void __init kb9202_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata kb9202_eth_data = { .phy_irq_pin = AT91_PIN_PB29, .is_rmii = 0, @@ -95,6 +89,29 @@ static struct at91_mmc_data __initdata kb9202_mmc_data = { .wire4 = 1, }; +static struct mtd_partition __initdata kb9202_nand_partition[] = { + { + .name = "nand_fs", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition *nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(kb9202_nand_partition); + return kb9202_nand_partition; +} + +static struct at91_nand_data __initdata kb9202_nand_data = { + .ale = 22, + .cle = 21, + // .det_pin = ... not there + .rdy_pin = AT91_PIN_PC29, + .enable_pin = AT91_PIN_PC28, + .partition_info = nand_partitions, +}; + static void __init kb9202_board_init(void) { /* Serial */ @@ -111,6 +128,8 @@ static void __init kb9202_board_init(void) at91_add_device_i2c(); /* SPI */ at91_add_device_spi(NULL, 0); + /* NAND */ + at91_add_device_nand(&kb9202_nand_data); } MACHINE_START(KB9200, "KB920x") diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c index edc2cc837ae..a43b061a7c8 100644 --- a/arch/arm/mach-at91rm9200/clock.c +++ b/arch/arm/mach-at91rm9200/clock.c @@ -29,7 +29,7 @@ #include <asm/hardware.h> -#include "generic.h" +#include "clock.h" /* @@ -38,23 +38,15 @@ * PLLB be used at other rates (on boards that don't need USB), etc. */ -struct clk { - const char *name; /* unique clock name */ - const char *function; /* function of the clock */ - struct device *dev; /* device associated with function */ - unsigned long rate_hz; - struct clk *parent; - u32 pmc_mask; - void (*mode)(struct clk *, int); - unsigned id:2; /* PCK0..3, or 32k/main/a/b */ - unsigned primary:1; - unsigned pll:1; - unsigned programmable:1; - u16 users; -}; +#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY) +#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE) +#define clk_is_peripheral(x) ((x)->type & CLK_TYPE_PERIPHERAL) + + +static LIST_HEAD(clocks); +static DEFINE_SPINLOCK(clk_lock); -static spinlock_t clk_lock; -static u32 at91_pllb_usb_init; +static u32 at91_pllb_usb_init; /* * Four primary clock sources: two crystal oscillators (32K, main), and @@ -67,21 +59,20 @@ static struct clk clk32k = { .rate_hz = AT91_SLOW_CLOCK, .users = 1, /* always on */ .id = 0, - .primary = 1, + .type = CLK_TYPE_PRIMARY, }; static struct clk main_clk = { .name = "main", .pmc_mask = AT91_PMC_MOSCS, /* in PMC_SR */ .id = 1, - .primary = 1, + .type = CLK_TYPE_PRIMARY, }; static struct clk plla = { .name = "plla", .parent = &main_clk, .pmc_mask = AT91_PMC_LOCKA, /* in PMC_SR */ .id = 2, - .primary = 1, - .pll = 1, + .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL, }; static void pllb_mode(struct clk *clk, int is_on) @@ -94,6 +85,7 @@ static void pllb_mode(struct clk *clk, int is_on) } else value = 0; + // REVISIT: Add work-around for AT91RM9200 Errata #26 ? at91_sys_write(AT91_CKGR_PLLBR, value); do { @@ -107,8 +99,7 @@ static struct clk pllb = { .pmc_mask = AT91_PMC_LOCKB, /* in PMC_SR */ .mode = pllb_mode, .id = 3, - .primary = 1, - .pll = 1, + .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL, }; static void pmc_sys_mode(struct clk *clk, int is_on) @@ -133,41 +124,6 @@ static struct clk uhpck = { .mode = pmc_sys_mode, }; -#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS -/* - * The four programmable clocks can be parented by any primary clock. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .mode = pmc_sys_mode, - .programmable = 1, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .mode = pmc_sys_mode, - .programmable = 1, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .mode = pmc_sys_mode, - .programmable = 1, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .mode = pmc_sys_mode, - .programmable = 1, - .id = 3, -}; -#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ - /* * The master clock is divided from the CPU clock (by 1-4). It's used for @@ -187,131 +143,21 @@ static void pmc_periph_mode(struct clk *clk, int is_on) at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask); } -static struct clk udc_clk = { - .name = "udc_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_UDP, - .mode = pmc_periph_mode, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_UHP, - .mode = pmc_periph_mode, -}; -static struct clk ether_clk = { - .name = "ether_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_EMAC, - .mode = pmc_periph_mode, -}; -static struct clk mmc_clk = { - .name = "mci_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_MCI, - .mode = pmc_periph_mode, -}; -static struct clk twi_clk = { - .name = "twi_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_TWI, - .mode = pmc_periph_mode, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_US0, - .mode = pmc_periph_mode, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_US1, - .mode = pmc_periph_mode, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_US2, - .mode = pmc_periph_mode, -}; -static struct clk usart3_clk = { - .name = "usart3_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_US3, - .mode = pmc_periph_mode, -}; -static struct clk spi_clk = { - .name = "spi0_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_SPI, - .mode = pmc_periph_mode, -}; -static struct clk pioA_clk = { - .name = "pioA_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_PIOA, - .mode = pmc_periph_mode, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_PIOB, - .mode = pmc_periph_mode, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_PIOC, - .mode = pmc_periph_mode, -}; -static struct clk pioD_clk = { - .name = "pioD_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_PIOD, - .mode = pmc_periph_mode, -}; - -static struct clk *const clock_list[] = { - /* four primary clocks -- MUST BE FIRST! */ - &clk32k, - &main_clk, - &plla, - &pllb, - - /* PLLB children (USB) */ - &udpck, - &uhpck, - -#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS - /* programmable clocks */ - &pck0, - &pck1, - &pck2, - &pck3, -#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ - - /* MCK and peripherals */ - &mck, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &usart3_clk, - &mmc_clk, - &udc_clk, - &twi_clk, - &spi_clk, - &pioA_clk, - &pioB_clk, - &pioC_clk, - &pioD_clk, - // ssc0..ssc2 - // tc0..tc5 - // irq0..irq6 - &ohci_clk, - ðer_clk, -}; +static struct clk __init *at91_css_to_clk(unsigned long css) +{ + switch (css) { + case AT91_PMC_CSS_SLOW: + return &clk32k; + case AT91_PMC_CSS_MAIN: + return &main_clk; + case AT91_PMC_CSS_PLLA: + return &plla; + case AT91_PMC_CSS_PLLB: + return &pllb; + } + return NULL; +} /* * Associate a particular clock with a function (eg, "uart") and device. @@ -329,14 +175,12 @@ void __init at91_clock_associate(const char *id, struct device *dev, const char clk->dev = dev; } -/* clocks are all static for now; no refcounting necessary */ +/* clocks cannot be de-registered no refcounting necessary */ struct clk *clk_get(struct device *dev, const char *id) { - int i; - - for (i = 0; i < ARRAY_SIZE(clock_list); i++) { - struct clk *clk = clock_list[i]; + struct clk *clk; + list_for_each_entry(clk, &clocks, node) { if (strcmp(id, clk->name) == 0) return clk; if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0) @@ -424,7 +268,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate) unsigned prescale; unsigned long actual; - if (!clk->programmable) + if (!clk_is_programmable(clk)) return -EINVAL; spin_lock_irqsave(&clk_lock, flags); @@ -446,7 +290,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) unsigned prescale; unsigned long actual; - if (!clk->programmable) + if (!clk_is_programmable(clk)) return -EINVAL; if (clk->users) return -EBUSY; @@ -484,7 +328,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) if (clk->users) return -EBUSY; - if (!parent->primary || !clk->programmable) + if (!clk_is_primary(parent) || !clk_is_programmable(clk)) return -EINVAL; spin_lock_irqsave(&clk_lock, flags); @@ -497,6 +341,18 @@ int clk_set_parent(struct clk *clk, struct clk *parent) } EXPORT_SYMBOL(clk_set_parent); +/* establish PCK0..PCK3 parentage and rate */ +static void init_programmable_clock(struct clk *clk) +{ + struct clk *parent; + u32 pckr; + + pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); + parent = at91_css_to_clk(pckr & AT91_PMC_CSS); + clk->parent = parent; + clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3)); +} + #endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ /*------------------------------------------------------------------------*/ @@ -506,6 +362,7 @@ EXPORT_SYMBOL(clk_set_parent); static int at91_clk_show(struct seq_file *s, void *unused) { u32 scsr, pcsr, sr; + struct clk *clk; unsigned i; seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR)); @@ -523,9 +380,8 @@ static int at91_clk_show(struct seq_file *s, void *unused) seq_printf(s, "\n"); - for (i = 0; i < ARRAY_SIZE(clock_list); i++) { - char *state; - struct clk *clk = clock_list[i]; + list_for_each_entry(clk, &clocks, node) { + char *state; if (clk->mode == pmc_sys_mode) state = (scsr & clk->pmc_mask) ? "on" : "off"; @@ -570,6 +426,28 @@ postcore_initcall(at91_clk_debugfs_init); /*------------------------------------------------------------------------*/ +/* Register a new clock */ +int __init clk_register(struct clk *clk) +{ + if (clk_is_peripheral(clk)) { + clk->parent = &mck; + clk->mode = pmc_periph_mode; + list_add_tail(&clk->node, &clocks); + } +#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + else if (clk_is_programmable(clk)) { + clk->mode = pmc_sys_mode; + init_programmable_clock(clk); + list_add_tail(&clk->node, &clocks); + } +#endif + + return 0; +} + + +/*------------------------------------------------------------------------*/ + static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) { unsigned mul, div; @@ -640,20 +518,17 @@ fail: return 0; } - /* * Several unused clocks may be active. Turn them off. */ -static void at91_periphclk_reset(void) +static void __init at91_periphclk_reset(void) { unsigned long reg; - int i; + struct clk *clk; reg = at91_sys_read(AT91_PMC_PCSR); - for (i = 0; i < ARRAY_SIZE(clock_list); i++) { - struct clk *clk = clock_list[i]; - + list_for_each_entry(clk, &clocks, node) { if (clk->mode != pmc_periph_mode) continue; @@ -664,11 +539,25 @@ static void at91_periphclk_reset(void) at91_sys_write(AT91_PMC_PCDR, reg); } +static struct clk *const standard_pmc_clocks[] __initdata = { + /* four primary clocks */ + &clk32k, + &main_clk, + &plla, + &pllb, + + /* PLLB children (USB) */ + &udpck, + &uhpck, + + /* MCK */ + &mck +}; + int __init at91_clock_init(unsigned long main_clock) { unsigned tmp, freq, mckr; - - spin_lock_init(&clk_lock); + int i; /* * When the bootloader initialized the main oscillator correctly, @@ -709,11 +598,15 @@ int __init at91_clock_init(unsigned long main_clock) * For now, assume this parentage won't change. */ mckr = at91_sys_read(AT91_PMC_MCKR); - mck.parent = clock_list[mckr & AT91_PMC_CSS]; + mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS); freq = mck.parent->rate_hz; freq /= (1 << ((mckr >> 2) & 3)); /* prescale */ mck.rate_hz = freq / (1 + ((mckr >> 8) & 3)); /* mdiv */ + /* Register the PMC's standard clocks */ + for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) + list_add_tail(&standard_pmc_clocks[i]->node, &clocks); + /* MCK and CPU clock are "always on" */ clk_enable(&mck); @@ -722,35 +615,8 @@ int __init at91_clock_init(unsigned long main_clock) (unsigned) main_clock / 1000000, ((unsigned) main_clock % 1000000) / 1000); -#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS - /* establish PCK0..PCK3 parentage */ - for (tmp = 0; tmp < ARRAY_SIZE(clock_list); tmp++) { - struct clk *clk = clock_list[tmp], *parent; - u32 pckr; - - if (!clk->programmable) - continue; - - pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); - parent = clock_list[pckr & AT91_PMC_CSS]; - clk->parent = parent; - clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3)); - - if (clk->users == 0) { - /* not being used, so switch it off */ - at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask); - } - } -#else /* disable all programmable clocks */ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3); -#endif - - /* enable the PIO clocks */ - clk_enable(&pioA_clk); - clk_enable(&pioB_clk); - clk_enable(&pioC_clk); - clk_enable(&pioD_clk); /* disable all other unused peripheral clocks */ at91_periphclk_reset(); diff --git a/arch/arm/mach-at91rm9200/clock.h b/arch/arm/mach-at91rm9200/clock.h new file mode 100644 index 00000000000..0592e662ab3 --- /dev/null +++ b/arch/arm/mach-at91rm9200/clock.h @@ -0,0 +1,30 @@ +/* + * linux/arch/arm/mach-at91rm9200/clock.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define CLK_TYPE_PRIMARY 0x1 +#define CLK_TYPE_PLL 0x2 +#define CLK_TYPE_PROGRAMMABLE 0x4 +#define CLK_TYPE_PERIPHERAL 0x8 + + +struct clk { + struct list_head node; + const char *name; /* unique clock name */ + const char *function; /* function of the clock */ + struct device *dev; /* device associated with function */ + unsigned long rate_hz; + struct clk *parent; + u32 pmc_mask; + void (*mode)(struct clk *, int); + unsigned id:2; /* PCK0..3, or 32k/main/a/b */ + unsigned type; /* clock type */ + u16 users; +}; + + +extern int __init clk_register(struct clk *clk); diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index 4352acb8817..01525530c28 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -35,13 +35,13 @@ static struct at91_usbh_data usbh_data; static struct resource at91_usbh_resources[] = { [0] = { - .start = AT91_UHP_BASE, - .end = AT91_UHP_BASE + SZ_1M - 1, + .start = AT91RM9200_UHP_BASE, + .end = AT91RM9200_UHP_BASE + SZ_1M - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_UHP, - .end = AT91_ID_UHP, + .start = AT91RM9200_ID_UHP, + .end = AT91RM9200_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -80,13 +80,13 @@ static struct at91_udc_data udc_data; static struct resource at91_udc_resources[] = { [0] = { - .start = AT91_BASE_UDP, - .end = AT91_BASE_UDP + SZ_16K - 1, + .start = AT91RM9200_BASE_UDP, + .end = AT91RM9200_BASE_UDP + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_UDP, - .end = AT91_ID_UDP, + .start = AT91RM9200_ID_UDP, + .end = AT91RM9200_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -131,13 +131,13 @@ static struct at91_eth_data eth_data; static struct resource at91_eth_resources[] = { [0] = { - .start = AT91_BASE_EMAC, - .end = AT91_BASE_EMAC + SZ_16K - 1, + .start = AT91_VA_BASE_EMAC, + .end = AT91_VA_BASE_EMAC + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_EMAC, - .end = AT91_ID_EMAC, + .start = AT91RM9200_ID_EMAC, + .end = AT91RM9200_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -263,13 +263,13 @@ static struct at91_mmc_data mmc_data; static struct resource at91_mmc_resources[] = { [0] = { - .start = AT91_BASE_MCI, - .end = AT91_BASE_MCI + SZ_16K - 1, + .start = AT91RM9200_BASE_MCI, + .end = AT91RM9200_BASE_MCI + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_MCI, - .end = AT91_ID_MCI, + .start = AT91RM9200_ID_MCI, + .end = AT91RM9200_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -423,13 +423,13 @@ static u64 spi_dmamask = 0xffffffffUL; static struct resource at91_spi_resources[] = { [0] = { - .start = AT91_BASE_SPI, - .end = AT91_BASE_SPI + SZ_16K - 1, + .start = AT91RM9200_BASE_SPI, + .end = AT91RM9200_BASE_SPI + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SPI, - .end = AT91_ID_SPI, + .start = AT91RM9200_ID_SPI, + .end = AT91RM9200_ID_SPI, .flags = IORESOURCE_IRQ, }, }; @@ -582,13 +582,13 @@ static inline void configure_dbgu_pins(void) static struct resource uart0_resources[] = { [0] = { - .start = AT91_BASE_US0, - .end = AT91_BASE_US0 + SZ_16K - 1, + .start = AT91RM9200_BASE_US0, + .end = AT91RM9200_BASE_US0 + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_US0, - .end = AT91_ID_US0, + .start = AT91RM9200_ID_US0, + .end = AT91RM9200_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -624,13 +624,13 @@ static inline void configure_usart0_pins(void) static struct resource uart1_resources[] = { [0] = { - .start = AT91_BASE_US1, - .end = AT91_BASE_US1 + SZ_16K - 1, + .start = AT91RM9200_BASE_US1, + .end = AT91RM9200_BASE_US1 + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_US1, - .end = AT91_ID_US1, + .start = AT91RM9200_ID_US1, + .end = AT91RM9200_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -665,13 +665,13 @@ static inline void configure_usart1_pins(void) static struct resource uart2_resources[] = { [0] = { - .start = AT91_BASE_US2, - .end = AT91_BASE_US2 + SZ_16K - 1, + .start = AT91RM9200_BASE_US2, + .end = AT91RM9200_BASE_US2 + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_US2, - .end = AT91_ID_US2, + .start = AT91RM9200_ID_US2, + .end = AT91RM9200_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -700,13 +700,13 @@ static inline void configure_usart2_pins(void) static struct resource uart3_resources[] = { [0] = { - .start = AT91_BASE_US3, - .end = AT91_BASE_US3 + SZ_16K - 1, + .start = AT91RM9200_BASE_US3, + .end = AT91RM9200_BASE_US3 + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_US3, - .end = AT91_ID_US3, + .start = AT91RM9200_ID_US3, + .end = AT91RM9200_ID_US3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91rm9200/generic.h b/arch/arm/mach-at91rm9200/generic.h index 7979d8ab7e0..694e411e285 100644 --- a/arch/arm/mach-at91rm9200/generic.h +++ b/arch/arm/mach-at91rm9200/generic.h @@ -8,18 +8,17 @@ * published by the Free Software Foundation. */ + /* Processors */ +extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks); + /* Interrupts */ -extern void __init at91rm9200_init_irq(unsigned int priority[]); +extern void __init at91rm9200_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); -extern void __init at91_gpio_irq_setup(unsigned banks); /* Timer */ struct sys_timer; extern struct sys_timer at91rm9200_timer; - /* Memory Map */ -extern void __init at91rm9200_map_io(void); - /* Clocks */ extern int __init at91_clock_init(unsigned long main_clock); struct device; @@ -29,3 +28,14 @@ extern void __init at91_clock_associate(const char *id, struct device *dev, cons extern void at91_irq_suspend(void); extern void at91_irq_resume(void); + /* GPIO */ +#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */ +#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */ + +struct at91_gpio_bank { + unsigned short id; /* peripheral ID */ + unsigned long offset; /* offset from system peripheral base */ + struct clk *clock; /* associated clock */ +}; +extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks); +extern void __init at91_gpio_irq_setup(void); diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index cec199fd672..58c9bf5e952 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -9,6 +9,7 @@ * (at your option) any later version. */ +#include <linux/clk.h> #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -20,12 +21,12 @@ #include <asm/hardware.h> #include <asm/arch/gpio.h> -static const u32 pio_controller_offset[4] = { - AT91_PIOA, - AT91_PIOB, - AT91_PIOC, - AT91_PIOD, -}; +#include "generic.h" + + +static struct at91_gpio_bank *gpio; +static int gpio_banks; + static inline void __iomem *pin_to_controller(unsigned pin) { @@ -33,8 +34,8 @@ static inline void __iomem *pin_to_controller(unsigned pin) pin -= PIN_BASE; pin /= 32; - if (likely(pin < BGA_GPIO_BANKS)) - return sys_base + pio_controller_offset[pin]; + if (likely(pin < gpio_banks)) + return sys_base + gpio[pin].offset; return NULL; } @@ -179,7 +180,6 @@ EXPORT_SYMBOL(at91_set_multi_drive); /*--------------------------------------------------------------------------*/ - /* * assuming the pin is muxed as a gpio output, set its value. */ @@ -216,8 +216,8 @@ EXPORT_SYMBOL(at91_get_gpio_value); #ifdef CONFIG_PM -static u32 wakeups[BGA_GPIO_BANKS]; -static u32 backups[BGA_GPIO_BANKS]; +static u32 wakeups[MAX_GPIO_BANKS]; +static u32 backups[MAX_GPIO_BANKS]; static int gpio_irq_set_wake(unsigned pin, unsigned state) { @@ -226,7 +226,7 @@ static int gpio_irq_set_wake(unsigned pin, unsigned state) pin -= PIN_BASE; pin /= 32; - if (unlikely(pin >= BGA_GPIO_BANKS)) + if (unlikely(pin >= MAX_GPIO_BANKS)) return -EINVAL; if (state) @@ -241,8 +241,8 @@ void at91_gpio_suspend(void) { int i; - for (i = 0; i < BGA_GPIO_BANKS; i++) { - u32 pio = pio_controller_offset[i]; + for (i = 0; i < gpio_banks; i++) { + u32 pio = gpio[i].offset; /* * Note: drivers should have disabled GPIO interrupts that @@ -257,14 +257,14 @@ void at91_gpio_suspend(void) * first place! */ backups[i] = at91_sys_read(pio + PIO_IMR); - at91_sys_write(pio_controller_offset[i] + PIO_IDR, backups[i]); - at91_sys_write(pio_controller_offset[i] + PIO_IER, wakeups[i]); + at91_sys_write(pio + PIO_IDR, backups[i]); + at91_sys_write(pio + PIO_IER, wakeups[i]); if (!wakeups[i]) { - disable_irq_wake(AT91_ID_PIOA + i); - at91_sys_write(AT91_PMC_PCDR, 1 << (AT91_ID_PIOA + i)); + disable_irq_wake(gpio[i].id); + at91_sys_write(AT91_PMC_PCDR, 1 << gpio[i].id); } else { - enable_irq_wake(AT91_ID_PIOA + i); + enable_irq_wake(gpio[i].id); #ifdef CONFIG_PM_DEBUG printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]); #endif @@ -276,16 +276,13 @@ void at91_gpio_resume(void) { int i; - for (i = 0; i < BGA_GPIO_BANKS; i++) { - at91_sys_write(pio_controller_offset[i] + PIO_IDR, wakeups[i]); - at91_sys_write(pio_controller_offset[i] + PIO_IER, backups[i]); - } + for (i = 0; i < gpio_banks; i++) { + u32 pio = gpio[i].offset; - at91_sys_write(AT91_PMC_PCER, - (1 << AT91_ID_PIOA) - | (1 << AT91_ID_PIOB) - | (1 << AT91_ID_PIOC) - | (1 << AT91_ID_PIOD)); + at91_sys_write(pio + PIO_IDR, wakeups[i]); + at91_sys_write(pio + PIO_IER, backups[i]); + at91_sys_write(AT91_PMC_PCER, 1 << gpio[i].id); + } } #else @@ -377,20 +374,25 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs /* now it may re-trigger */ } -/* call this from board-specific init_irq */ -void __init at91_gpio_irq_setup(unsigned banks) +/*--------------------------------------------------------------------------*/ + +/* + * Called from the processor-specific init to enable GPIO interrupt support. + */ +void __init at91_gpio_irq_setup(void) { - unsigned pioc, pin, id; + unsigned pioc, pin; - if (banks > 4) - banks = 4; - for (pioc = 0, pin = PIN_BASE, id = AT91_ID_PIOA; - pioc < banks; - pioc++, id++) { + for (pioc = 0, pin = PIN_BASE; + pioc < gpio_banks; + pioc++) { void __iomem *controller; + unsigned id = gpio[pioc].id; unsigned i; - controller = (void __iomem *) AT91_VA_BASE_SYS + pio_controller_offset[pioc]; + clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */ + + controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset; __raw_writel(~0, controller + PIO_IDR); set_irq_data(id, (void *) pin); @@ -408,5 +410,16 @@ void __init at91_gpio_irq_setup(unsigned banks) set_irq_chained_handler(id, gpio_irq_handler); } - pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, banks); + pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks); +} + +/* + * Called from the processor-specific init to enable GPIO pin support. + */ +void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) +{ + BUG_ON(nr_banks > MAX_GPIO_BANKS); + + gpio = data; + gpio_banks = nr_banks; } diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c index c3a5e777f9f..3e488117ca9 100644 --- a/arch/arm/mach-at91rm9200/irq.c +++ b/arch/arm/mach-at91rm9200/irq.c @@ -34,8 +34,6 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include "generic.h" - static void at91_aic_mask_irq(unsigned int irq) { @@ -61,12 +59,12 @@ static int at91_aic_set_type(unsigned irq, unsigned type) srctype = AT91_AIC_SRCTYPE_RISING; break; case IRQT_LOW: - if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0)) /* only supported on external interrupts */ + if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0)) /* only supported on external interrupts */ return -EINVAL; srctype = AT91_AIC_SRCTYPE_LOW; break; case IRQT_FALLING: - if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0)) /* only supported on external interrupts */ + if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0)) /* only supported on external interrupts */ return -EINVAL; srctype = AT91_AIC_SRCTYPE_FALLING; break; diff --git a/arch/arm/mach-at91rm9200/pm.c b/arch/arm/mach-at91rm9200/pm.c index 47e5480feb7..32c95d8eaac 100644 --- a/arch/arm/mach-at91rm9200/pm.c +++ b/arch/arm/mach-at91rm9200/pm.c @@ -123,13 +123,13 @@ static int at91_pm_enter(suspend_state_t state) (at91_sys_read(AT91_PMC_PCSR) | (1 << AT91_ID_FIQ) | (1 << AT91_ID_SYS) - | (1 << AT91_ID_IRQ0) - | (1 << AT91_ID_IRQ1) - | (1 << AT91_ID_IRQ2) - | (1 << AT91_ID_IRQ3) - | (1 << AT91_ID_IRQ4) - | (1 << AT91_ID_IRQ5) - | (1 << AT91_ID_IRQ6)) + | (1 << AT91RM9200_ID_IRQ0) + | (1 << AT91RM9200_ID_IRQ1) + | (1 << AT91RM9200_ID_IRQ2) + | (1 << AT91RM9200_ID_IRQ3) + | (1 << AT91RM9200_ID_IRQ4) + | (1 << AT91RM9200_ID_IRQ5) + | (1 << AT91RM9200_ID_IRQ6)) & at91_sys_read(AT91_AIC_IMR), state); diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index f1b740083ae..e346b03cd92 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -15,6 +15,12 @@ config MACH_EDB9302 Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9302 Evaluation Board. +config MACH_EDB9312 + bool "Support Cirrus Logic EDB9312" + help + Say 'Y' here if you want your kernel to support the Cirrus + Logic EDB9312 Evaluation Board. + config MACH_EDB9315 bool "Support Cirrus Logic EDB9315" help diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 1f5a6b0487e..c2eb18b530c 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -7,6 +7,7 @@ obj-n := obj- := obj-$(CONFIG_MACH_EDB9302) += edb9302.o +obj-$(CONFIG_MACH_EDB9312) += edb9312.o obj-$(CONFIG_MACH_EDB9315) += edb9315.o obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c new file mode 100644 index 00000000000..9e399211108 --- /dev/null +++ b/arch/arm/mach-ep93xx/edb9312.c @@ -0,0 +1,63 @@ +/* + * arch/arm/mach-ep93xx/edb9312.c + * Cirrus Logic EDB9312 support. + * + * Copyright (C) 2006 Infosys Technologies Limited + * Toufeeq Hussain <toufeeq_hussain@infosys.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <asm/io.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static struct physmap_flash_data edb9312_flash_data = { + .width = 4, +}; + +static struct resource edb9312_flash_resource = { + .start = 0x60000000, + .end = 0x61ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device edb9312_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &edb9312_flash_data, + }, + .num_resources = 1, + .resource = &edb9312_flash_resource, +}; + +static void __init edb9312_init_machine(void) +{ + ep93xx_init_devices(); + platform_device_register(&edb9312_flash); +} + +MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") + /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb9312_init_machine, +MACHINE_END diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 823e25d4547..a1ae49df5c3 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -69,16 +69,16 @@ dc21285_read_config(struct pci_bus *bus, unsigned int devfn, int where, if (addr) switch (size) { case 1: - asm("ldr%?b %0, [%1, %2]" - : "=r" (v) : "r" (addr), "r" (where)); + asm("ldrb %0, [%1, %2]" + : "=r" (v) : "r" (addr), "r" (where) : "cc"); break; case 2: - asm("ldr%?h %0, [%1, %2]" - : "=r" (v) : "r" (addr), "r" (where)); + asm("ldrh %0, [%1, %2]" + : "=r" (v) : "r" (addr), "r" (where) : "cc"); break; case 4: - asm("ldr%? %0, [%1, %2]" - : "=r" (v) : "r" (addr), "r" (where)); + asm("ldr %0, [%1, %2]" + : "=r" (v) : "r" (addr), "r" (where) : "cc"); break; } @@ -103,16 +103,19 @@ dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where, if (addr) switch (size) { case 1: - asm("str%?b %0, [%1, %2]" - : : "r" (value), "r" (addr), "r" (where)); + asm("strb %0, [%1, %2]" + : : "r" (value), "r" (addr), "r" (where) + : "cc"); break; case 2: - asm("str%?h %0, [%1, %2]" - : : "r" (value), "r" (addr), "r" (where)); + asm("strh %0, [%1, %2]" + : : "r" (value), "r" (addr), "r" (where) + : "cc"); break; case 4: - asm("str%? %0, [%1, %2]" - : : "r" (value), "r" (addr), "r" (where)); + asm("str %0, [%1, %2]" + : : "r" (value), "r" (addr), "r" (where) + : "cc"); break; } diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig new file mode 100644 index 00000000000..c072d94070d --- /dev/null +++ b/arch/arm/mach-iop32x/Kconfig @@ -0,0 +1,35 @@ +if ARCH_IOP32X + +menu "IOP32x Implementation Options" + +comment "IOP32x Platform Types" + +config MACH_GLANTANK + bool "Enable support for the IO-Data GLAN Tank" + help + Say Y here if you want to run your kernel on the GLAN Tank + NAS appliance or machines from IO-Data's HDL-Gxxx, HDL-GWxxx + and HDL-GZxxx series. + +config ARCH_IQ80321 + bool "Enable support for IQ80321" + help + Say Y here if you want to run your kernel on the Intel IQ80321 + evaluation kit for the IOP321 processor. + +config ARCH_IQ31244 + bool "Enable support for EP80219/IQ31244" + help + Say Y here if you want to run your kernel on the Intel EP80219 + evaluation kit for the Intel 80219 processor (a IOP321 variant) + or the IQ31244 evaluation kit for the IOP321 processor. + +config MACH_N2100 + bool "Enable support for the Thecus n2100" + help + Say Y here if you want to run your kernel on the Thecus n2100 + NAS appliance. + +endmenu + +endif diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile new file mode 100644 index 00000000000..7b05b37e1f9 --- /dev/null +++ b/arch/arm/mach-iop32x/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for the linux kernel. +# + +obj-y := irq.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_MACH_GLANTANK) += glantank.o +obj-$(CONFIG_ARCH_IQ80321) += iq80321.o +obj-$(CONFIG_ARCH_IQ31244) += iq31244.o +obj-$(CONFIG_MACH_N2100) += n2100.o diff --git a/arch/arm/mach-iop32x/Makefile.boot b/arch/arm/mach-iop32x/Makefile.boot new file mode 100644 index 00000000000..47000dccd61 --- /dev/null +++ b/arch/arm/mach-iop32x/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0xa0008000 +params_phys-y := 0xa0000100 +initrd_phys-y := 0xa0800000 diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c new file mode 100644 index 00000000000..b9b765057db --- /dev/null +++ b/arch/arm/mach-iop32x/glantank.c @@ -0,0 +1,195 @@ +/* + * arch/arm/mach-iop32x/glantank.c + * + * Board support code for the GLAN Tank. + * + * Copyright (C) 2006 Martin Michlmayr <tbm@cyrius.com> + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/pci.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> +#include <asm/page.h> + +/* + * GLAN Tank timer tick configuration. + */ +static void __init glantank_timer_init(void) +{ + /* 33.333 MHz crystal. */ + iop3xx_init_time(200000000); +} + +static struct sys_timer glantank_timer = { + .init = glantank_timer_init, + .offset = iop3xx_gettimeoffset, +}; + + +/* + * GLAN Tank I/O. + */ +static struct map_desc glantank_io_desc[] __initdata = { + { /* on-board devices */ + .virtual = GLANTANK_UART, + .pfn = __phys_to_pfn(GLANTANK_UART), + .length = 0x00100000, + .type = MT_DEVICE + }, +}; + +void __init glantank_map_io(void) +{ + iop3xx_map_io(); + iotable_init(glantank_io_desc, ARRAY_SIZE(glantank_io_desc)); +} + + +/* + * GLAN Tank PCI. + */ +#define INTA IRQ_IOP32X_XINT0 +#define INTB IRQ_IOP32X_XINT1 +#define INTC IRQ_IOP32X_XINT2 +#define INTD IRQ_IOP32X_XINT3 + +static inline int __init +glantank_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[][4] = { + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + {INTD, INTD, INTD, INTD}, /* UART (8250) */ + {INTA, INTA, INTA, INTA}, /* Ethernet (E1000) */ + {INTB, INTB, INTB, INTB}, /* IDE (AEC6280R) */ + {INTC, INTC, INTC, INTC}, /* USB (NEC) */ + }; + + BUG_ON(pin < 1 || pin > 4); + + return pci_irq_table[slot % 4][pin - 1]; +} + +static struct hw_pci glantank_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = glantank_pci_map_irq, +}; + +static int __init glantank_pci_init(void) +{ + if (machine_is_glantank()) + pci_common_init(&glantank_pci); + + return 0; +} + +subsys_initcall(glantank_pci_init); + + +/* + * GLAN Tank machine initialization. + */ +static struct physmap_flash_data glantank_flash_data = { + .width = 1, +}; + +static struct resource glantank_flash_resource = { + .start = 0xf0000000, + .end = 0xf007ffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device glantank_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &glantank_flash_data, + }, + .num_resources = 1, + .resource = &glantank_flash_resource, +}; + +static struct plat_serial8250_port glantank_serial_port[] = { + { + .mapbase = GLANTANK_UART, + .membase = (char *)GLANTANK_UART, + .irq = IRQ_IOP32X_XINT3, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = 1843200, + }, + { }, +}; + +static struct resource glantank_uart_resource = { + .start = GLANTANK_UART, + .end = GLANTANK_UART + 7, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device glantank_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = glantank_serial_port, + }, + .num_resources = 1, + .resource = &glantank_uart_resource, +}; + +static void glantank_power_off(void) +{ + __raw_writeb(0x01, 0xfe8d0004); + + while (1) + ; +} + +static void __init glantank_init_machine(void) +{ + platform_device_register(&iop3xx_i2c0_device); + platform_device_register(&iop3xx_i2c1_device); + platform_device_register(&glantank_flash_device); + platform_device_register(&glantank_serial_device); + + pm_power_off = glantank_power_off; +} + +MACHINE_START(GLANTANK, "GLAN Tank") + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_io = GLANTANK_UART, + .io_pg_offst = ((GLANTANK_UART) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = glantank_map_io, + .init_irq = iop32x_init_irq, + .timer = &glantank_timer, + .init_machine = glantank_init_machine, +MACHINE_END diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c new file mode 100644 index 00000000000..be4aedfa0de --- /dev/null +++ b/arch/arm/mach-iop32x/iq31244.c @@ -0,0 +1,293 @@ +/* + * arch/arm/mach-iop32x/iq31244.c + * + * Board support code for the Intel EP80219 and IQ31244 platforms. + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * Copyright 2003 (c) MontaVista, Software, Inc. + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/pm.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/pci.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> +#include <asm/page.h> +#include <asm/pgtable.h> + + +/* + * The EP80219 and IQ31244 use the same machine ID. To find out + * which of the two we're running on, we look at the processor ID. + */ +static int is_80219(void) +{ + extern int processor_id; + return !!((processor_id & 0xffffffe0) == 0x69052e20); +} + + +/* + * EP80219/IQ31244 timer tick configuration. + */ +static void __init iq31244_timer_init(void) +{ + if (is_80219()) { + /* 33.333 MHz crystal. */ + iop3xx_init_time(200000000); + } else { + /* 33.000 MHz crystal. */ + iop3xx_init_time(198000000); + } +} + +static struct sys_timer iq31244_timer = { + .init = iq31244_timer_init, + .offset = iop3xx_gettimeoffset, +}; + + +/* + * IQ31244 I/O. + */ +static struct map_desc iq31244_io_desc[] __initdata = { + { /* on-board devices */ + .virtual = IQ31244_UART, + .pfn = __phys_to_pfn(IQ31244_UART), + .length = 0x00100000, + .type = MT_DEVICE, + }, +}; + +void __init iq31244_map_io(void) +{ + iop3xx_map_io(); + iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc)); +} + + +/* + * EP80219/IQ31244 PCI. + */ +static inline int __init +ep80219_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if (slot == 0) { + /* CFlash */ + irq = IRQ_IOP32X_XINT1; + } else if (slot == 1) { + /* 82551 Pro 100 */ + irq = IRQ_IOP32X_XINT0; + } else if (slot == 2) { + /* PCI-X Slot */ + irq = IRQ_IOP32X_XINT3; + } else if (slot == 3) { + /* SATA */ + irq = IRQ_IOP32X_XINT2; + } else { + printk(KERN_ERR "ep80219_pci_map_irq() called for unknown " + "device PCI:%d:%d:%d\n", dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + irq = -1; + } + + return irq; +} + +static struct hw_pci ep80219_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = ep80219_pci_map_irq, +}; + +static inline int __init +iq31244_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if (slot == 0) { + /* CFlash */ + irq = IRQ_IOP32X_XINT1; + } else if (slot == 1) { + /* SATA */ + irq = IRQ_IOP32X_XINT2; + } else if (slot == 2) { + /* PCI-X Slot */ + irq = IRQ_IOP32X_XINT3; + } else if (slot == 3) { + /* 82546 GigE */ + irq = IRQ_IOP32X_XINT0; + } else { + printk(KERN_ERR "iq31244_pci_map_irq called for unknown " + "device PCI:%d:%d:%d\n", dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + irq = -1; + } + + return irq; +} + +static struct hw_pci iq31244_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = iq31244_pci_map_irq, +}; + +static int __init iq31244_pci_init(void) +{ + if (machine_is_iq31244()) { + if (is_80219()) { + pci_common_init(&ep80219_pci); + } else { + pci_common_init(&iq31244_pci); + } + } + + return 0; +} + +subsys_initcall(iq31244_pci_init); + + +/* + * IQ31244 machine initialisation. + */ +static struct physmap_flash_data iq31244_flash_data = { + .width = 2, +}; + +static struct resource iq31244_flash_resource = { + .start = 0xf0000000, + .end = 0xf07fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device iq31244_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &iq31244_flash_data, + }, + .num_resources = 1, + .resource = &iq31244_flash_resource, +}; + +static struct plat_serial8250_port iq31244_serial_port[] = { + { + .mapbase = IQ31244_UART, + .membase = (char *)IQ31244_UART, + .irq = IRQ_IOP32X_XINT1, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = 1843200, + }, + { }, +}; + +static struct resource iq31244_uart_resource = { + .start = IQ31244_UART, + .end = IQ31244_UART + 7, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device iq31244_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = iq31244_serial_port, + }, + .num_resources = 1, + .resource = &iq31244_uart_resource, +}; + +/* + * This function will send a SHUTDOWN_COMPLETE message to the PIC + * controller over I2C. We are not using the i2c subsystem since + * we are going to power off and it may be removed + */ +void ep80219_power_off(void) +{ + /* + * Send the Address byte w/ the start condition + */ + *IOP3XX_IDBR1 = 0x60; + *IOP3XX_ICR1 = 0xE9; + mdelay(1); + + /* + * Send the START_MSG byte w/ no start or stop condition + */ + *IOP3XX_IDBR1 = 0x0F; + *IOP3XX_ICR1 = 0xE8; + mdelay(1); + + /* + * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or + * stop condition + */ + *IOP3XX_IDBR1 = 0x03; + *IOP3XX_ICR1 = 0xE8; + mdelay(1); + + /* + * Send an ignored byte w/ stop condition + */ + *IOP3XX_IDBR1 = 0x00; + *IOP3XX_ICR1 = 0xEA; + + while (1) + ; +} + +static void __init iq31244_init_machine(void) +{ + platform_device_register(&iop3xx_i2c0_device); + platform_device_register(&iop3xx_i2c1_device); + platform_device_register(&iq31244_flash_device); + platform_device_register(&iq31244_serial_device); + + if (is_80219()) + pm_power_off = ep80219_power_off; +} + +MACHINE_START(IQ31244, "Intel IQ31244") + /* Maintainer: Intel Corp. */ + .phys_io = IQ31244_UART, + .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = iq31244_map_io, + .init_irq = iop32x_init_irq, + .timer = &iq31244_timer, + .init_machine = iq31244_init_machine, +MACHINE_END diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c new file mode 100644 index 00000000000..1f37b550188 --- /dev/null +++ b/arch/arm/mach-iop32x/iq80321.c @@ -0,0 +1,193 @@ +/* + * arch/arm/mach-iop32x/iq80321.c + * + * Board support code for the Intel IQ80321 platform. + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/pci.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> +#include <asm/page.h> +#include <asm/pgtable.h> + +/* + * IQ80321 timer tick configuration. + */ +static void __init iq80321_timer_init(void) +{ + /* 33.333 MHz crystal. */ + iop3xx_init_time(200000000); +} + +static struct sys_timer iq80321_timer = { + .init = iq80321_timer_init, + .offset = iop3xx_gettimeoffset, +}; + + +/* + * IQ80321 I/O. + */ +static struct map_desc iq80321_io_desc[] __initdata = { + { /* on-board devices */ + .virtual = IQ80321_UART, + .pfn = __phys_to_pfn(IQ80321_UART), + .length = 0x00100000, + .type = MT_DEVICE, + }, +}; + +void __init iq80321_map_io(void) +{ + iop3xx_map_io(); + iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc)); +} + + +/* + * IQ80321 PCI. + */ +static inline int __init +iq80321_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if ((slot == 2 || slot == 6) && pin == 1) { + /* PCI-X Slot INTA */ + irq = IRQ_IOP32X_XINT2; + } else if ((slot == 2 || slot == 6) && pin == 2) { + /* PCI-X Slot INTA */ + irq = IRQ_IOP32X_XINT3; + } else if ((slot == 2 || slot == 6) && pin == 3) { + /* PCI-X Slot INTA */ + irq = IRQ_IOP32X_XINT0; + } else if ((slot == 2 || slot == 6) && pin == 4) { + /* PCI-X Slot INTA */ + irq = IRQ_IOP32X_XINT1; + } else if (slot == 4 || slot == 8) { + /* Gig-E */ + irq = IRQ_IOP32X_XINT0; + } else { + printk(KERN_ERR "iq80321_pci_map_irq() called for unknown " + "device PCI:%d:%d:%d\n", dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + irq = -1; + } + + return irq; +} + +static struct hw_pci iq80321_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = iq80321_pci_map_irq, +}; + +static int __init iq80321_pci_init(void) +{ + if (machine_is_iq80321()) + pci_common_init(&iq80321_pci); + + return 0; +} + +subsys_initcall(iq80321_pci_init); + + +/* + * IQ80321 machine initialisation. + */ +static struct physmap_flash_data iq80321_flash_data = { + .width = 1, +}; + +static struct resource iq80321_flash_resource = { + .start = 0xf0000000, + .end = 0xf07fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device iq80321_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &iq80321_flash_data, + }, + .num_resources = 1, + .resource = &iq80321_flash_resource, +}; + +static struct plat_serial8250_port iq80321_serial_port[] = { + { + .mapbase = IQ80321_UART, + .membase = (char *)IQ80321_UART, + .irq = IRQ_IOP32X_XINT1, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = 1843200, + }, + { }, +}; + +static struct resource iq80321_uart_resource = { + .start = IQ80321_UART, + .end = IQ80321_UART + 7, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device iq80321_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = iq80321_serial_port, + }, + .num_resources = 1, + .resource = &iq80321_uart_resource, +}; + +static void __init iq80321_init_machine(void) +{ + platform_device_register(&iop3xx_i2c0_device); + platform_device_register(&iop3xx_i2c1_device); + platform_device_register(&iq80321_flash_device); + platform_device_register(&iq80321_serial_device); +} + +MACHINE_START(IQ80321, "Intel IQ80321") + /* Maintainer: Intel Corp. */ + .phys_io = IQ80321_UART, + .io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = iq80321_map_io, + .init_irq = iop32x_init_irq, + .timer = &iq80321_timer, + .init_machine = iq80321_init_machine, +MACHINE_END diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c new file mode 100644 index 00000000000..69d6302f40c --- /dev/null +++ b/arch/arm/mach-iop32x/irq.c @@ -0,0 +1,76 @@ +/* + * arch/arm/mach-iop32x/irq.c + * + * Generic IOP32X IRQ handling functionality + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <asm/mach/irq.h> +#include <asm/irq.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> + +static u32 iop32x_mask; + +static inline void intctl_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static inline void intstr_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static void +iop32x_irq_mask(unsigned int irq) +{ + iop32x_mask &= ~(1 << irq); + intctl_write(iop32x_mask); +} + +static void +iop32x_irq_unmask(unsigned int irq) +{ + iop32x_mask |= 1 << irq; + intctl_write(iop32x_mask); +} + +struct irq_chip ext_chip = { + .name = "IOP32x", + .ack = iop32x_irq_mask, + .mask = iop32x_irq_mask, + .unmask = iop32x_irq_unmask, +}; + +void __init iop32x_init_irq(void) +{ + int i; + + intctl_write(0); + intstr_write(0); + if (machine_is_glantank() || + machine_is_iq80321() || + machine_is_iq31244() || + machine_is_n2100()) + *IOP3XX_PCIIRSR = 0x0f; + + for (i = 0; i < NR_IRQS; i++) { + set_irq_chip(i, &ext_chip); + set_irq_handler(i, do_level_IRQ); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + } +} diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c new file mode 100644 index 00000000000..a2c94a47b2b --- /dev/null +++ b/arch/arm/mach-iop32x/n2100.c @@ -0,0 +1,251 @@ +/* + * arch/arm/mach-iop32x/n2100.c + * + * Board support code for the Thecus N2100 platform. + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * Copyright 2003 (c) MontaVista, Software, Inc. + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/pm.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/pci.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> +#include <asm/page.h> +#include <asm/pgtable.h> + +/* + * N2100 timer tick configuration. + */ +static void __init n2100_timer_init(void) +{ + /* 33.000 MHz crystal. */ + iop3xx_init_time(198000000); +} + +static struct sys_timer n2100_timer = { + .init = n2100_timer_init, + .offset = iop3xx_gettimeoffset, +}; + + +/* + * N2100 I/O. + */ +static struct map_desc n2100_io_desc[] __initdata = { + { /* on-board devices */ + .virtual = N2100_UART, + .pfn = __phys_to_pfn(N2100_UART), + .length = 0x00100000, + .type = MT_DEVICE + }, +}; + +void __init n2100_map_io(void) +{ + iop3xx_map_io(); + iotable_init(n2100_io_desc, ARRAY_SIZE(n2100_io_desc)); +} + + +/* + * N2100 PCI. + */ +static inline int __init +n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if (PCI_SLOT(dev->devfn) == 1) { + /* RTL8110SB #1 */ + irq = IRQ_IOP32X_XINT0; + } else if (PCI_SLOT(dev->devfn) == 2) { + /* RTL8110SB #2 */ + irq = IRQ_IOP32X_XINT1; + } else if (PCI_SLOT(dev->devfn) == 3) { + /* Sil3512 */ + irq = IRQ_IOP32X_XINT2; + } else if (PCI_SLOT(dev->devfn) == 4 && pin == 1) { + /* VT6212 INTA */ + irq = IRQ_IOP32X_XINT1; + } else if (PCI_SLOT(dev->devfn) == 4 && pin == 2) { + /* VT6212 INTB */ + irq = IRQ_IOP32X_XINT0; + } else if (PCI_SLOT(dev->devfn) == 4 && pin == 3) { + /* VT6212 INTC */ + irq = IRQ_IOP32X_XINT2; + } else if (PCI_SLOT(dev->devfn) == 5) { + /* Mini-PCI slot */ + irq = IRQ_IOP32X_XINT3; + } else { + printk(KERN_ERR "n2100_pci_map_irq() called for unknown " + "device PCI:%d:%d:%d\n", dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + irq = -1; + } + + return irq; +} + +static struct hw_pci n2100_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = n2100_pci_map_irq, +}; + +static int __init n2100_pci_init(void) +{ + if (machine_is_n2100()) + pci_common_init(&n2100_pci); + + return 0; +} + +subsys_initcall(n2100_pci_init); + + +/* + * N2100 machine initialisation. + */ +static struct physmap_flash_data n2100_flash_data = { + .width = 2, +}; + +static struct resource n2100_flash_resource = { + .start = 0xf0000000, + .end = 0xf0ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device n2100_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &n2100_flash_data, + }, + .num_resources = 1, + .resource = &n2100_flash_resource, +}; + + +static struct plat_serial8250_port n2100_serial_port[] = { + { + .mapbase = N2100_UART, + .membase = (char *)N2100_UART, + .irq = 0, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = 1843200, + }, + { }, +}; + +static struct resource n2100_uart_resource = { + .start = N2100_UART, + .end = N2100_UART + 7, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device n2100_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = n2100_serial_port, + }, + .num_resources = 1, + .resource = &n2100_uart_resource, +}; + + +/* + * Pull PCA9532 GPIO #8 low to power off the machine. + */ +static void n2100_power_off(void) +{ + local_irq_disable(); + + /* Start condition, I2C address of PCA9532, write transaction. */ + *IOP3XX_IDBR0 = 0xc0; + *IOP3XX_ICR0 = 0xe9; + mdelay(1); + + /* Write address 0x08. */ + *IOP3XX_IDBR0 = 0x08; + *IOP3XX_ICR0 = 0xe8; + mdelay(1); + + /* Write data 0x01, stop condition. */ + *IOP3XX_IDBR0 = 0x01; + *IOP3XX_ICR0 = 0xea; + + while (1) + ; +} + + +static struct timer_list power_button_poll_timer; + +static void power_button_poll(unsigned long dummy) +{ + if (gpio_line_get(N2100_POWER_BUTTON) == 0) { + ctrl_alt_del(); + return; + } + + power_button_poll_timer.expires = jiffies + (HZ / 10); + add_timer(&power_button_poll_timer); +} + + +static void __init n2100_init_machine(void) +{ + platform_device_register(&iop3xx_i2c0_device); + platform_device_register(&n2100_flash_device); + platform_device_register(&n2100_serial_device); + + pm_power_off = n2100_power_off; + + init_timer(&power_button_poll_timer); + power_button_poll_timer.function = power_button_poll; + power_button_poll_timer.expires = jiffies + (HZ / 10); + add_timer(&power_button_poll_timer); +} + +MACHINE_START(N2100, "Thecus N2100") + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_io = N2100_UART, + .io_pg_offst = ((N2100_UART) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = n2100_map_io, + .init_irq = iop32x_init_irq, + .timer = &n2100_timer, + .init_machine = n2100_init_machine, +MACHINE_END diff --git a/arch/arm/mach-iop33x/Kconfig b/arch/arm/mach-iop33x/Kconfig new file mode 100644 index 00000000000..9aa016bb18f --- /dev/null +++ b/arch/arm/mach-iop33x/Kconfig @@ -0,0 +1,21 @@ +if ARCH_IOP33X + +menu "IOP33x Implementation Options" + +comment "IOP33x Platform Types" + +config ARCH_IQ80331 + bool "Enable support for IQ80331" + help + Say Y here if you want to run your kernel on the Intel IQ80331 + evaluation kit for the IOP331 chipset. + +config MACH_IQ80332 + bool "Enable support for IQ80332" + help + Say Y here if you want to run your kernel on the Intel IQ80332 + evaluation kit for the IOP332 chipset. + +endmenu + +endif diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile new file mode 100644 index 00000000000..90081d8c9d1 --- /dev/null +++ b/arch/arm/mach-iop33x/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the linux kernel. +# + +obj-y := irq.o uart.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_ARCH_IQ80331) += iq80331.o +obj-$(CONFIG_MACH_IQ80332) += iq80332.o diff --git a/arch/arm/mach-iop33x/Makefile.boot b/arch/arm/mach-iop33x/Makefile.boot new file mode 100644 index 00000000000..67039c3e0c4 --- /dev/null +++ b/arch/arm/mach-iop33x/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c new file mode 100644 index 00000000000..97a7b748826 --- /dev/null +++ b/arch/arm/mach-iop33x/iq80331.c @@ -0,0 +1,148 @@ +/* + * arch/arm/mach-iop33x/iq80331.c + * + * Board support code for the Intel IQ80331 platform. + * + * Author: Dave Jiang <dave.jiang@intel.com> + * Copyright (C) 2003 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/pci.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> +#include <asm/page.h> +#include <asm/pgtable.h> + +/* + * IQ80331 timer tick configuration. + */ +static void __init iq80331_timer_init(void) +{ + /* D-Step parts run at a higher internal bus frequency */ + if (*IOP3XX_ATURID >= 0xa) + iop3xx_init_time(333000000); + else + iop3xx_init_time(266000000); +} + +static struct sys_timer iq80331_timer = { + .init = iq80331_timer_init, + .offset = iop3xx_gettimeoffset, +}; + + +/* + * IQ80331 PCI. + */ +static inline int __init +iq80331_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if (slot == 1 && pin == 1) { + /* PCI-X Slot INTA */ + irq = IRQ_IOP33X_XINT1; + } else if (slot == 1 && pin == 2) { + /* PCI-X Slot INTB */ + irq = IRQ_IOP33X_XINT2; + } else if (slot == 1 && pin == 3) { + /* PCI-X Slot INTC */ + irq = IRQ_IOP33X_XINT3; + } else if (slot == 1 && pin == 4) { + /* PCI-X Slot INTD */ + irq = IRQ_IOP33X_XINT0; + } else if (slot == 2) { + /* GigE */ + irq = IRQ_IOP33X_XINT2; + } else { + printk(KERN_ERR "iq80331_pci_map_irq() called for unknown " + "device PCI:%d:%d:%d\n", dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + irq = -1; + } + + return irq; +} + +static struct hw_pci iq80331_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = iq80331_pci_map_irq, +}; + +static int __init iq80331_pci_init(void) +{ + if (machine_is_iq80331()) + pci_common_init(&iq80331_pci); + + return 0; +} + +subsys_initcall(iq80331_pci_init); + + +/* + * IQ80331 machine initialisation. + */ +static struct physmap_flash_data iq80331_flash_data = { + .width = 1, +}; + +static struct resource iq80331_flash_resource = { + .start = 0xc0000000, + .end = 0xc07fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device iq80331_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &iq80331_flash_data, + }, + .num_resources = 1, + .resource = &iq80331_flash_resource, +}; + +static void __init iq80331_init_machine(void) +{ + platform_device_register(&iop3xx_i2c0_device); + platform_device_register(&iop3xx_i2c1_device); + platform_device_register(&iop33x_uart0_device); + platform_device_register(&iop33x_uart1_device); + platform_device_register(&iq80331_flash_device); +} + +MACHINE_START(IQ80331, "Intel IQ80331") + /* Maintainer: Intel Corp. */ + .phys_io = 0xfefff000, + .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = iop3xx_map_io, + .init_irq = iop33x_init_irq, + .timer = &iq80331_timer, + .init_machine = iq80331_init_machine, +MACHINE_END diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c new file mode 100644 index 00000000000..9887bfc1c07 --- /dev/null +++ b/arch/arm/mach-iop33x/iq80332.c @@ -0,0 +1,148 @@ +/* + * arch/arm/mach-iop33x/iq80332.c + * + * Board support code for the Intel IQ80332 platform. + * + * Author: Dave Jiang <dave.jiang@intel.com> + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/pci.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> +#include <asm/page.h> +#include <asm/pgtable.h> + +/* + * IQ80332 timer tick configuration. + */ +static void __init iq80332_timer_init(void) +{ + /* D-Step parts and the iop333 run at a higher internal bus frequency */ + if (*IOP3XX_ATURID >= 0xa || *IOP3XX_ATUDID == 0x374) + iop3xx_init_time(333000000); + else + iop3xx_init_time(266000000); +} + +static struct sys_timer iq80332_timer = { + .init = iq80332_timer_init, + .offset = iop3xx_gettimeoffset, +}; + + +/* + * IQ80332 PCI. + */ +static inline int __init +iq80332_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if (slot == 4 && pin == 1) { + /* PCI-X Slot INTA */ + irq = IRQ_IOP33X_XINT0; + } else if (slot == 4 && pin == 2) { + /* PCI-X Slot INTB */ + irq = IRQ_IOP33X_XINT1; + } else if (slot == 4 && pin == 3) { + /* PCI-X Slot INTC */ + irq = IRQ_IOP33X_XINT2; + } else if (slot == 4 && pin == 4) { + /* PCI-X Slot INTD */ + irq = IRQ_IOP33X_XINT3; + } else if (slot == 6) { + /* GigE */ + irq = IRQ_IOP33X_XINT2; + } else { + printk(KERN_ERR "iq80332_pci_map_irq() called for unknown " + "device PCI:%d:%d:%d\n", dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + irq = -1; + } + + return irq; +} + +static struct hw_pci iq80332_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = iq80332_pci_map_irq, +}; + +static int __init iq80332_pci_init(void) +{ + if (machine_is_iq80332()) + pci_common_init(&iq80332_pci); + + return 0; +} + +subsys_initcall(iq80332_pci_init); + + +/* + * IQ80332 machine initialisation. + */ +static struct physmap_flash_data iq80332_flash_data = { + .width = 1, +}; + +static struct resource iq80332_flash_resource = { + .start = 0xc0000000, + .end = 0xc07fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device iq80332_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &iq80332_flash_data, + }, + .num_resources = 1, + .resource = &iq80332_flash_resource, +}; + +static void __init iq80332_init_machine(void) +{ + platform_device_register(&iop3xx_i2c0_device); + platform_device_register(&iop3xx_i2c1_device); + platform_device_register(&iop33x_uart0_device); + platform_device_register(&iop33x_uart1_device); + platform_device_register(&iq80332_flash_device); +} + +MACHINE_START(IQ80332, "Intel IQ80332") + /* Maintainer: Intel Corp. */ + .phys_io = 0xfefff000, + .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = iop3xx_map_io, + .init_irq = iop33x_init_irq, + .timer = &iq80332_timer, + .init_machine = iq80332_init_machine, +MACHINE_END diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c new file mode 100644 index 00000000000..63304b3d0d7 --- /dev/null +++ b/arch/arm/mach-iop33x/irq.c @@ -0,0 +1,127 @@ +/* + * arch/arm/mach-iop33x/irq.c + * + * Generic IOP331 IRQ handling functionality + * + * Author: Dave Jiang <dave.jiang@intel.com> + * Copyright (C) 2003 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <asm/mach/irq.h> +#include <asm/irq.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> + +static u32 iop33x_mask0; +static u32 iop33x_mask1; + +static inline void intctl0_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static inline void intctl1_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c1, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static inline void intstr0_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c2, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static inline void intstr1_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c3, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static inline void intbase_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c12, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static inline void intsize_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c13, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static void +iop33x_irq_mask1 (unsigned int irq) +{ + iop33x_mask0 &= ~(1 << irq); + intctl0_write(iop33x_mask0); +} + +static void +iop33x_irq_mask2 (unsigned int irq) +{ + iop33x_mask1 &= ~(1 << (irq - 32)); + intctl1_write(iop33x_mask1); +} + +static void +iop33x_irq_unmask1(unsigned int irq) +{ + iop33x_mask0 |= 1 << irq; + intctl0_write(iop33x_mask0); +} + +static void +iop33x_irq_unmask2(unsigned int irq) +{ + iop33x_mask1 |= (1 << (irq - 32)); + intctl1_write(iop33x_mask1); +} + +struct irq_chip iop33x_irqchip1 = { + .name = "IOP33x-1", + .ack = iop33x_irq_mask1, + .mask = iop33x_irq_mask1, + .unmask = iop33x_irq_unmask1, +}; + +struct irq_chip iop33x_irqchip2 = { + .name = "IOP33x-2", + .ack = iop33x_irq_mask2, + .mask = iop33x_irq_mask2, + .unmask = iop33x_irq_unmask2, +}; + +void __init iop33x_init_irq(void) +{ + int i; + + intctl0_write(0); + intctl1_write(0); + intstr0_write(0); + intstr1_write(0); + intbase_write(0); + intsize_write(1); + if (machine_is_iq80331()) + *IOP3XX_PCIIRSR = 0x0f; + + for (i = 0; i < NR_IRQS; i++) { + set_irq_chip(i, (i < 32) ? &iop33x_irqchip1 : &iop33x_irqchip2); + set_irq_handler(i, do_level_IRQ); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + } +} diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c new file mode 100644 index 00000000000..ac297cd0276 --- /dev/null +++ b/arch/arm/mach-iop33x/uart.c @@ -0,0 +1,105 @@ +/* + * arch/arm/mach-iop33x/uart.c + * + * Author: Dave Jiang (dave.jiang@intel.com) + * Copyright (C) 2004 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/major.h> +#include <linux/fs.h> +#include <linux/platform_device.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_8250.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/system.h> +#include <asm/memory.h> +#include <asm/hardware.h> +#include <asm/hardware/iop3xx.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#define IOP33X_UART_XTAL 33334000 + +static struct plat_serial8250_port iop33x_uart0_data[] = { + { + .membase = (char *)IOP33X_UART0_VIRT, + .mapbase = IOP33X_UART0_PHYS, + .irq = IRQ_IOP33X_UART0, + .uartclk = IOP33X_UART_XTAL, + .regshift = 2, + .iotype = UPIO_MEM, + .flags = UPF_SKIP_TEST, + }, + { }, +}; + +static struct resource iop33x_uart0_resources[] = { + [0] = { + .start = IOP33X_UART0_PHYS, + .end = IOP33X_UART0_PHYS + 0x3f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP33X_UART0, + .end = IRQ_IOP33X_UART0, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device iop33x_uart0_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = iop33x_uart0_data, + }, + .num_resources = 2, + .resource = iop33x_uart0_resources, +}; + + +static struct resource iop33x_uart1_resources[] = { + [0] = { + .start = IOP33X_UART1_PHYS, + .end = IOP33X_UART1_PHYS + 0x3f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP33X_UART1, + .end = IRQ_IOP33X_UART1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct plat_serial8250_port iop33x_uart1_data[] = { + { + .membase = (char *)IOP33X_UART1_VIRT, + .mapbase = IOP33X_UART1_PHYS, + .irq = IRQ_IOP33X_UART1, + .uartclk = IOP33X_UART_XTAL, + .regshift = 2, + .iotype = UPIO_MEM, + .flags = UPF_SKIP_TEST, + }, + { }, +}; + +struct platform_device iop33x_uart1_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = iop33x_uart1_data, + }, + .num_resources = 2, + .resource = iop33x_uart1_resources, +}; diff --git a/arch/arm/mach-iop3xx/Kconfig b/arch/arm/mach-iop3xx/Kconfig deleted file mode 100644 index 4422f238860..00000000000 --- a/arch/arm/mach-iop3xx/Kconfig +++ /dev/null @@ -1,66 +0,0 @@ -if ARCH_IOP3XX - -menu "IOP3xx Implementation Options" - -comment "IOP3xx Platform Types" - -config ARCH_IQ80321 - bool "Enable support for IQ80321" - select ARCH_IOP321 - help - Say Y here if you want to run your kernel on the Intel IQ80321 - evaluation kit for the IOP321 chipset. - -config ARCH_IQ31244 - bool "Enable support for IQ31244" - select ARCH_IOP321 - help - Say Y here if you want to run your kernel on the Intel IQ31244 - evaluation kit for the IOP321 chipset. - -config ARCH_IQ80331 - bool "Enable support for IQ80331" - select ARCH_IOP331 - help - Say Y here if you want to run your kernel on the Intel IQ80331 - evaluation kit for the IOP331 chipset. - -config MACH_IQ80332 - bool "Enable support for IQ80332" - select ARCH_IOP331 - help - Say Y here if you want to run your kernel on the Intel IQ80332 - evaluation kit for the IOP332 chipset. - -config ARCH_EP80219 - bool "Enable support for EP80219" - select ARCH_IOP321 - select ARCH_IQ31244 - help - Say Y here if you want to run your kernel on the Intel EP80219 - evaluation kit for the Intel 80219 chipset (a IOP321 variant). - -# Which IOP variant are we running? -config ARCH_IOP321 - bool - help - The IQ80321 uses the IOP321 variant. - The IQ31244 and EP80219 uses the IOP321 variant. - -config ARCH_IOP331 - bool - default ARCH_IQ80331 - help - The IQ80331, IQ80332, and IQ80333 uses the IOP331 variant. - -comment "IOP3xx Chipset Features" - -config IOP331_STEPD - bool "Chip stepping D of the IOP80331 processor or IOP80333" - depends on (ARCH_IOP331) - help - Say Y here if you have StepD of the IOP80331 or IOP8033 - based platforms. - -endmenu -endif diff --git a/arch/arm/mach-iop3xx/Makefile b/arch/arm/mach-iop3xx/Makefile deleted file mode 100644 index b17eb1f4610..00000000000 --- a/arch/arm/mach-iop3xx/Makefile +++ /dev/null @@ -1,23 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := common.o - -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_ARCH_IOP321) += iop321-setup.o iop321-irq.o iop321-pci.o iop321-time.o - -obj-$(CONFIG_ARCH_IOP331) += iop331-setup.o iop331-irq.o iop331-pci.o iop331-time.o - -obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o - -obj-$(CONFIG_ARCH_IQ31244) += iq31244-mm.o iq31244-pci.o - -obj-$(CONFIG_ARCH_IQ80331) += iq80331-mm.o iq80331-pci.o - -obj-$(CONFIG_MACH_IQ80332) += iq80332-mm.o iq80332-pci.o diff --git a/arch/arm/mach-iop3xx/Makefile.boot b/arch/arm/mach-iop3xx/Makefile.boot deleted file mode 100644 index 6387aa20461..00000000000 --- a/arch/arm/mach-iop3xx/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ - zreladdr-y := 0xa0008000 -params_phys-y := 0xa0000100 -initrd_phys-y := 0xa0800000 -ifeq ($(CONFIG_ARCH_IOP331),y) - zreladdr-y := 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 -endif - diff --git a/arch/arm/mach-iop3xx/common.c b/arch/arm/mach-iop3xx/common.c deleted file mode 100644 index d7f50e57e75..00000000000 --- a/arch/arm/mach-iop3xx/common.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * arch/arm/mach-iop3xx/common.c - * - * Common routines shared across all IOP3xx implementations - * - * Author: Deepak Saxena <dsaxena@mvista.com> - * - * Copyright 2003 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/delay.h> -#include <asm/hardware.h> - -/* - * Shared variables - */ -unsigned long iop3xx_pcibios_min_io = 0; -unsigned long iop3xx_pcibios_min_mem = 0; - -#ifdef CONFIG_ARCH_EP80219 -#include <linux/kernel.h> -/* - * Default power-off for EP80219 - */ - -static inline void ep80219_send_to_pic(__u8 c) { -} - -void ep80219_power_off(void) -{ - /* - * This function will send a SHUTDOWN_COMPLETE message to the PIC controller - * over I2C. We are not using the i2c subsystem since we are going to power - * off and it may be removed - */ - - /* Send the Address byte w/ the start condition */ - *IOP321_IDBR1 = 0x60; - *IOP321_ICR1 = 0xE9; - mdelay(1); - - /* Send the START_MSG byte w/ no start or stop condition */ - *IOP321_IDBR1 = 0x0F; - *IOP321_ICR1 = 0xE8; - mdelay(1); - - /* Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or stop condition */ - *IOP321_IDBR1 = 0x03; - *IOP321_ICR1 = 0xE8; - mdelay(1); - - /* Send an ignored byte w/ stop condition */ - *IOP321_IDBR1 = 0x00; - *IOP321_ICR1 = 0xEA; - - while (1) ; -} - -#include <linux/init.h> -#include <linux/pm.h> - -static int __init ep80219_init(void) -{ - pm_power_off = ep80219_power_off; - return 0; -} -arch_initcall(ep80219_init); -#endif diff --git a/arch/arm/mach-iop3xx/iop321-irq.c b/arch/arm/mach-iop3xx/iop321-irq.c deleted file mode 100644 index 88ac333472c..00000000000 --- a/arch/arm/mach-iop3xx/iop321-irq.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/iop321-irq.c - * - * Generic IOP321 IRQ handling functionality - * - * Author: Rory Bolt <rorybolt@pacbell.net> - * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Added IOP3XX chipset and IQ80321 board masking code. - * - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/list.h> - -#include <asm/mach/irq.h> -#include <asm/irq.h> -#include <asm/hardware.h> - -#include <asm/mach-types.h> - -static u32 iop321_mask /* = 0 */; - -static inline void intctl_write(u32 val) -{ - asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val)); -} - -static inline void intstr_write(u32 val) -{ - asm volatile("mcr p6,0,%0,c4,c0,0"::"r" (val)); -} - -static void -iop321_irq_mask (unsigned int irq) -{ - - iop321_mask &= ~(1 << (irq - IOP321_IRQ_OFS)); - - intctl_write(iop321_mask); -} - -static void -iop321_irq_unmask (unsigned int irq) -{ - iop321_mask |= (1 << (irq - IOP321_IRQ_OFS)); - - intctl_write(iop321_mask); -} - -struct irq_chip ext_chip = { - .name = "IOP", - .ack = iop321_irq_mask, - .mask = iop321_irq_mask, - .unmask = iop321_irq_unmask, -}; - -void __init iop321_init_irq(void) -{ - unsigned int i, tmp; - - /* Enable access to coprocessor 6 for dealing with IRQs. - * From RMK: - * Basically, the Intel documentation here is poor. It appears that - * you need to set the bit to be able to access the coprocessor from - * SVC mode. Whether that allows access from user space or not is - * unclear. - */ - asm volatile ( - "mrc p15, 0, %0, c15, c1, 0\n\t" - "orr %0, %0, %1\n\t" - "mcr p15, 0, %0, c15, c1, 0\n\t" - /* The action is delayed, so we have to do this: */ - "mrc p15, 0, %0, c15, c1, 0\n\t" - "mov %0, %0\n\t" - "sub pc, pc, #4" - : "=r" (tmp) : "i" (1 << 6) ); - - intctl_write(0); // disable all interrupts - intstr_write(0); // treat all as IRQ - if(machine_is_iq80321() || - machine_is_iq31244()) // all interrupts are inputs to chip - *IOP321_PCIIRSR = 0x0f; - - for(i = IOP321_IRQ_OFS; i < NR_IOP321_IRQS; i++) - { - set_irq_chip(i, &ext_chip); - set_irq_handler(i, do_level_IRQ); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - - } -} - diff --git a/arch/arm/mach-iop3xx/iop321-pci.c b/arch/arm/mach-iop3xx/iop321-pci.c deleted file mode 100644 index 8ba6a0e2313..00000000000 --- a/arch/arm/mach-iop3xx/iop321-pci.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iop321-pci.c - * - * PCI support for the Intel IOP321 chipset - * - * Author: Rory Bolt <rorybolt@pacbell.net> - * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/ioport.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/system.h> -#include <asm/hardware.h> -#include <asm/mach/pci.h> - -#include <asm/arch/iop321.h> - -// #define DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) do { } while (0) -#endif - -/* - * This routine builds either a type0 or type1 configuration command. If the - * bus is on the 80321 then a type0 made, else a type1 is created. - */ -static u32 iop321_cfg_address(struct pci_bus *bus, int devfn, int where) -{ - struct pci_sys_data *sys = bus->sysdata; - u32 addr; - - if (sys->busnr == bus->number) - addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); - else - addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; - - addr |= PCI_FUNC(devfn) << 8 | (where & ~3); - - return addr; -} - -/* - * This routine checks the status of the last configuration cycle. If an error - * was detected it returns a 1, else it returns a 0. The errors being checked - * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during - * the discovery stage. - */ -static int iop321_pci_status(void) -{ - unsigned int status; - int ret = 0; - - /* - * Check the status registers. - */ - status = *IOP321_ATUSR; - if (status & 0xf900) - { - DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); - *IOP321_ATUSR = status & 0xf900; - ret = 1; - } - status = *IOP321_ATUISR; - if (status & 0x679f) - { - DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); - *IOP321_ATUISR = status & 0x679f; - ret = 1; - } - return ret; -} - -/* - * Simply write the address register and read the configuration - * data. Note that the 4 nop's ensure that we are able to handle - * a delayed abort (in theory.) - */ -static inline u32 iop321_read(unsigned long addr) -{ - u32 val; - - __asm__ __volatile__( - "str %1, [%2]\n\t" - "ldr %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : "=r" (val) - : "r" (addr), "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); - - return val; -} - -/* - * The read routines must check the error status of the last configuration - * cycle. If there was an error, the routine returns all hex f's. - */ -static int -iop321_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *value) -{ - unsigned long addr = iop321_cfg_address(bus, devfn, where); - u32 val = iop321_read(addr) >> ((where & 3) * 8); - - if( iop321_pci_status() ) - val = 0xffffffff; - - *value = val; - - return PCIBIOS_SUCCESSFUL; -} - -static int -iop321_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 value) -{ - unsigned long addr = iop321_cfg_address(bus, devfn, where); - u32 val; - - if (size != 4) { - val = iop321_read(addr); - if (!iop321_pci_status() == 0) - return PCIBIOS_SUCCESSFUL; - - where = (where & 3) * 8; - - if (size == 1) - val &= ~(0xff << where); - else - val &= ~(0xffff << where); - - *IOP321_OCCDR = val | value << where; - } else { - asm volatile( - "str %1, [%2]\n\t" - "str %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : - : "r" (value), "r" (addr), - "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops iop321_ops = { - .read = iop321_read_config, - .write = iop321_write_config, -}; - -/* - * When a PCI device does not exist during config cycles, the 80200 gets a - * bus error instead of returning 0xffffffff. This handler simply returns. - */ -int -iop321_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", - addr, fsr, regs->ARM_pc, regs->ARM_lr); - - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return 0; -} - -/* - * Scan an IOP321 PCI bus. sys->bus defines which bus we scan. - */ -struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *sys) -{ - return pci_scan_bus(sys->busnr, &iop321_ops, sys); -} - -void iop321_init(void) -{ - DBG("PCI: Intel 80321 PCI init code.\n"); - DBG("ATU: IOP321_ATUCMD=0x%04x\n", *IOP321_ATUCMD); - DBG("ATU: IOP321_OMWTVR0=0x%04x, IOP321_OIOWTVR=0x%04x\n", - *IOP321_OMWTVR0, - *IOP321_OIOWTVR); - DBG("ATU: IOP321_ATUCR=0x%08x\n", *IOP321_ATUCR); - DBG("ATU: IOP321_IABAR0=0x%08x IOP321_IALR0=0x%08x IOP321_IATVR0=%08x\n", - *IOP321_IABAR0, *IOP321_IALR0, *IOP321_IATVR0); - DBG("ATU: IOP321_OMWTVR0=0x%08x\n", *IOP321_OMWTVR0); - DBG("ATU: IOP321_IABAR1=0x%08x IOP321_IALR1=0x%08x\n", - *IOP321_IABAR1, *IOP321_IALR1); - DBG("ATU: IOP321_ERBAR=0x%08x IOP321_ERLR=0x%08x IOP321_ERTVR=%08x\n", - *IOP321_ERBAR, *IOP321_ERLR, *IOP321_ERTVR); - DBG("ATU: IOP321_IABAR2=0x%08x IOP321_IALR2=0x%08x IOP321_IATVR2=%08x\n", - *IOP321_IABAR2, *IOP321_IALR2, *IOP321_IATVR2); - DBG("ATU: IOP321_IABAR3=0x%08x IOP321_IALR3=0x%08x IOP321_IATVR3=%08x\n", - *IOP321_IABAR3, *IOP321_IALR3, *IOP321_IATVR3); - - hook_fault_code(16+6, iop321_pci_abort, SIGBUS, "imprecise external abort"); -} - diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c deleted file mode 100644 index b6d096903c4..00000000000 --- a/arch/arm/mach-iop3xx/iop321-setup.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/iop321-setup.c - * - * Author: Nicolas Pitre <nico@cam.org> - * Copyright (C) 2001 MontaVista Software, Inc. - * Copyright (C) 2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/major.h> -#include <linux/fs.h> -#include <linux/platform_device.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_core.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/system.h> -#include <asm/memory.h> -#include <asm/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#define IOP321_UART_XTAL 1843200 - -/* - * Standard IO mapping for all IOP321 based systems - */ -static struct map_desc iop321_std_desc[] __initdata = { - { /* mem mapped registers */ - .virtual = IOP321_VIRT_MEM_BASE, - .pfn = __phys_to_pfn(IOP321_PHYS_MEM_BASE), - .length = 0x00002000, - .type = MT_DEVICE - }, { /* PCI IO space */ - .virtual = IOP321_PCI_LOWER_IO_VA, - .pfn = __phys_to_pfn(IOP321_PCI_LOWER_IO_PA), - .length = IOP321_PCI_IO_WINDOW_SIZE, - .type = MT_DEVICE - } -}; - -#ifdef CONFIG_ARCH_IQ80321 -#define UARTBASE IQ80321_UART -#define IRQ_UART IRQ_IQ80321_UART -#endif - -#ifdef CONFIG_ARCH_IQ31244 -#define UARTBASE IQ31244_UART -#define IRQ_UART IRQ_IQ31244_UART -#endif - -static struct uart_port iop321_serial_ports[] = { - { - .membase = (char*)(UARTBASE), - .mapbase = (UARTBASE), - .irq = IRQ_UART, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 0, - .uartclk = IOP321_UART_XTAL, - .line = 0, - .type = PORT_16550A, - .fifosize = 16 - } -}; - -static struct resource iop32x_i2c_0_resources[] = { - [0] = { - .start = 0xfffff680, - .end = 0xfffff698, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP321_I2C_0, - .end = IRQ_IOP321_I2C_0, - .flags = IORESOURCE_IRQ - } -}; - -static struct resource iop32x_i2c_1_resources[] = { - [0] = { - .start = 0xfffff6a0, - .end = 0xfffff6b8, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP321_I2C_1, - .end = IRQ_IOP321_I2C_1, - .flags = IORESOURCE_IRQ - } -}; - -static struct platform_device iop32x_i2c_0_controller = { - .name = "IOP3xx-I2C", - .id = 0, - .num_resources = 2, - .resource = iop32x_i2c_0_resources -}; - -static struct platform_device iop32x_i2c_1_controller = { - .name = "IOP3xx-I2C", - .id = 1, - .num_resources = 2, - .resource = iop32x_i2c_1_resources -}; - -static struct platform_device *iop32x_devices[] __initdata = { - &iop32x_i2c_0_controller, - &iop32x_i2c_1_controller -}; - -void __init iop32x_init(void) -{ - if(iop_is_321()) - { - platform_add_devices(iop32x_devices, - ARRAY_SIZE(iop32x_devices)); - } -} - -void __init iop321_map_io(void) -{ - iotable_init(iop321_std_desc, ARRAY_SIZE(iop321_std_desc)); - early_serial_setup(&iop321_serial_ports[0]); -} - -#ifdef CONFIG_ARCH_IQ80321 -extern void iq80321_map_io(void); -extern struct sys_timer iop321_timer; -extern void iop321_init_time(void); -#endif - -#ifdef CONFIG_ARCH_IQ31244 -extern void iq31244_map_io(void); -extern struct sys_timer iop321_timer; -extern void iop321_init_time(void); -#endif - -#if defined(CONFIG_ARCH_IQ80321) -MACHINE_START(IQ80321, "Intel IQ80321") - /* Maintainer: Intel Corporation */ - .phys_io = IQ80321_UART, - .io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc, - .map_io = iq80321_map_io, - .init_irq = iop321_init_irq, - .timer = &iop321_timer, - .boot_params = 0xa0000100, - .init_machine = iop32x_init, -MACHINE_END -#elif defined(CONFIG_ARCH_IQ31244) -MACHINE_START(IQ31244, "Intel IQ31244") - /* Maintainer: Intel Corp. */ - .phys_io = IQ31244_UART, - .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, - .map_io = iq31244_map_io, - .init_irq = iop321_init_irq, - .timer = &iop321_timer, - .boot_params = 0xa0000100, - .init_machine = iop32x_init, -MACHINE_END -#else -#error No machine descriptor defined for this IOP3XX implementation -#endif diff --git a/arch/arm/mach-iop3xx/iop321-time.c b/arch/arm/mach-iop3xx/iop321-time.c deleted file mode 100644 index 04b1a6f7eba..00000000000 --- a/arch/arm/mach-iop3xx/iop321-time.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iop321-time.c - * - * Timer code for IOP321 based systems - * - * Author: Deepak Saxena <dsaxena@mvista.com> - * - * Copyright 2002-2003 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/init.h> -#include <linux/timex.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> - -#define IOP321_TIME_SYNC 0 - -static inline unsigned long get_elapsed(void) -{ - return LATCH - *IOP321_TU_TCR0; -} - -static unsigned long iop321_gettimeoffset(void) -{ - unsigned long elapsed, usec; - u32 tisr1, tisr2; - - /* - * If an interrupt was pending before we read the timer, - * we've already wrapped. Factor this into the time. - * If an interrupt was pending after we read the timer, - * it may have wrapped between checking the interrupt - * status and reading the timer. Re-read the timer to - * be sure its value is after the wrap. - */ - - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr1)); - elapsed = get_elapsed(); - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr2)); - - if(tisr1 & 1) - elapsed += LATCH; - else if (tisr2 & 1) - elapsed = LATCH + get_elapsed(); - - /* - * Now convert them to usec. - */ - usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); - - return usec; -} - -static irqreturn_t -iop321_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - u32 tisr; - - write_seqlock(&xtime_lock); - - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr)); - tisr |= 1; - asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr)); - - timer_tick(regs); - - write_sequnlock(&xtime_lock); - - return IRQ_HANDLED; -} - -static struct irqaction iop321_timer_irq = { - .name = "IOP321 Timer Tick", - .handler = iop321_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER, -}; - -static void __init iop321_timer_init(void) -{ - u32 timer_ctl; - - setup_irq(IRQ_IOP321_TIMER0, &iop321_timer_irq); - - timer_ctl = IOP321_TMR_EN | IOP321_TMR_PRIVILEGED | IOP321_TMR_RELOAD | - IOP321_TMR_RATIO_1_1; - - asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (LATCH)); - - asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl)); -} - -struct sys_timer iop321_timer = { - .init = &iop321_timer_init, - .offset = iop321_gettimeoffset, -}; diff --git a/arch/arm/mach-iop3xx/iop331-irq.c b/arch/arm/mach-iop3xx/iop331-irq.c deleted file mode 100644 index cab11722ced..00000000000 --- a/arch/arm/mach-iop3xx/iop331-irq.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/iop331-irq.c - * - * Generic IOP331 IRQ handling functionality - * - * Author: Dave Jiang <dave.jiang@intel.com> - * Copyright (C) 2003 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/list.h> - -#include <asm/mach/irq.h> -#include <asm/irq.h> -#include <asm/hardware.h> - -#include <asm/mach-types.h> - -static u32 iop331_mask0 = 0; -static u32 iop331_mask1 = 0; - -static inline void intctl_write0(u32 val) -{ - // INTCTL0 - asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val)); -} - -static inline void intctl_write1(u32 val) -{ - // INTCTL1 - asm volatile("mcr p6,0,%0,c1,c0,0"::"r" (val)); -} - -static inline void intstr_write0(u32 val) -{ - // INTSTR0 - asm volatile("mcr p6,0,%0,c2,c0,0"::"r" (val)); -} - -static inline void intstr_write1(u32 val) -{ - // INTSTR1 - asm volatile("mcr p6,0,%0,c3,c0,0"::"r" (val)); -} - -static void -iop331_irq_mask1 (unsigned int irq) -{ - iop331_mask0 &= ~(1 << (irq - IOP331_IRQ_OFS)); - intctl_write0(iop331_mask0); -} - -static void -iop331_irq_mask2 (unsigned int irq) -{ - iop331_mask1 &= ~(1 << (irq - IOP331_IRQ_OFS - 32)); - intctl_write1(iop331_mask1); -} - -static void -iop331_irq_unmask1(unsigned int irq) -{ - iop331_mask0 |= (1 << (irq - IOP331_IRQ_OFS)); - intctl_write0(iop331_mask0); -} - -static void -iop331_irq_unmask2(unsigned int irq) -{ - iop331_mask1 |= (1 << (irq - IOP331_IRQ_OFS - 32)); - intctl_write1(iop331_mask1); -} - -struct irq_chip iop331_irqchip1 = { - .name = "IOP-1", - .ack = iop331_irq_mask1, - .mask = iop331_irq_mask1, - .unmask = iop331_irq_unmask1, -}; - -struct irq_chip iop331_irqchip2 = { - .name = "IOP-2", - .ack = iop331_irq_mask2, - .mask = iop331_irq_mask2, - .unmask = iop331_irq_unmask2, -}; - -void __init iop331_init_irq(void) -{ - unsigned int i, tmp; - - /* Enable access to coprocessor 6 for dealing with IRQs. - * From RMK: - * Basically, the Intel documentation here is poor. It appears that - * you need to set the bit to be able to access the coprocessor from - * SVC mode. Whether that allows access from user space or not is - * unclear. - */ - asm volatile ( - "mrc p15, 0, %0, c15, c1, 0\n\t" - "orr %0, %0, %1\n\t" - "mcr p15, 0, %0, c15, c1, 0\n\t" - /* The action is delayed, so we have to do this: */ - "mrc p15, 0, %0, c15, c1, 0\n\t" - "mov %0, %0\n\t" - "sub pc, pc, #4" - : "=r" (tmp) : "i" (1 << 6) ); - - intctl_write0(0); // disable all interrupts - intctl_write1(0); - intstr_write0(0); // treat all as IRQ - intstr_write1(0); - if(machine_is_iq80331()) // all interrupts are inputs to chip - *IOP331_PCIIRSR = 0x0f; - - for(i = IOP331_IRQ_OFS; i < NR_IOP331_IRQS; i++) - { - set_irq_chip(i, (i < 32) ? &iop331_irqchip1 : &iop331_irqchip2); - set_irq_handler(i, do_level_IRQ); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } -} - diff --git a/arch/arm/mach-iop3xx/iop331-pci.c b/arch/arm/mach-iop3xx/iop331-pci.c deleted file mode 100644 index 44dd213b48a..00000000000 --- a/arch/arm/mach-iop3xx/iop331-pci.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iop331-pci.c - * - * PCI support for the Intel IOP331 chipset - * - * Author: Dave Jiang (dave.jiang@intel.com) - * Copyright (C) 2003, 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/ioport.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/system.h> -#include <asm/hardware.h> -#include <asm/mach/pci.h> - -#include <asm/arch/iop331.h> - -#undef DEBUG -#undef DEBUG1 - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) do { } while (0) -#endif - -#ifdef DEBUG1 -#define DBG1(x...) printk(x) -#else -#define DBG1(x...) do { } while (0) -#endif - -/* - * This routine builds either a type0 or type1 configuration command. If the - * bus is on the 80331 then a type0 made, else a type1 is created. - */ -static u32 iop331_cfg_address(struct pci_bus *bus, int devfn, int where) -{ - struct pci_sys_data *sys = bus->sysdata; - u32 addr; - - if (sys->busnr == bus->number) - addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); - else - addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; - - addr |= PCI_FUNC(devfn) << 8 | (where & ~3); - - return addr; -} - -/* - * This routine checks the status of the last configuration cycle. If an error - * was detected it returns a 1, else it returns a 0. The errors being checked - * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during - * the discovery stage. - */ -static int iop331_pci_status(void) -{ - unsigned int status; - int ret = 0; - - /* - * Check the status registers. - */ - status = *IOP331_ATUSR; - if (status & 0xf900) - { - DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); - *IOP331_ATUSR = status & 0xf900; - ret = 1; - } - status = *IOP331_ATUISR; - if (status & 0x679f) - { - DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); - *IOP331_ATUISR = status & 0x679f; - ret = 1; - } - return ret; -} - -/* - * Simply write the address register and read the configuration - * data. Note that the 4 nop's ensure that we are able to handle - * a delayed abort (in theory.) - */ -static inline u32 iop331_read(unsigned long addr) -{ - u32 val; - - __asm__ __volatile__( - "str %1, [%2]\n\t" - "ldr %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : "=r" (val) - : "r" (addr), "r" (IOP331_OCCAR), "r" (IOP331_OCCDR)); - - return val; -} - -/* - * The read routines must check the error status of the last configuration - * cycle. If there was an error, the routine returns all hex f's. - */ -static int -iop331_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *value) -{ - unsigned long addr = iop331_cfg_address(bus, devfn, where); - u32 val = iop331_read(addr) >> ((where & 3) * 8); - - if( iop331_pci_status() ) - val = 0xffffffff; - - *value = val; - - return PCIBIOS_SUCCESSFUL; -} - -static int -iop331_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 value) -{ - unsigned long addr = iop331_cfg_address(bus, devfn, where); - u32 val; - - if (size != 4) { - val = iop331_read(addr); - if (!iop331_pci_status() == 0) - return PCIBIOS_SUCCESSFUL; - - where = (where & 3) * 8; - - if (size == 1) - val &= ~(0xff << where); - else - val &= ~(0xffff << where); - - *IOP331_OCCDR = val | value << where; - } else { - asm volatile( - "str %1, [%2]\n\t" - "str %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : - : "r" (value), "r" (addr), - "r" (IOP331_OCCAR), "r" (IOP331_OCCDR)); - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops iop331_ops = { - .read = iop331_read_config, - .write = iop331_write_config, -}; - -/* - * When a PCI device does not exist during config cycles, the XScale gets a - * bus error instead of returning 0xffffffff. This handler simply returns. - */ -int -iop331_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", - addr, fsr, regs->ARM_pc, regs->ARM_lr); - - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return 0; -} - -/* - * Scan an IOP331 PCI bus. sys->bus defines which bus we scan. - */ -struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *sys) -{ - return pci_scan_bus(sys->busnr, &iop331_ops, sys); -} - -void iop331_init(void) -{ - DBG1("PCI: Intel 80331 PCI init code.\n"); - DBG1("\tATU: IOP331_ATUCMD=0x%04x\n", *IOP331_ATUCMD); - DBG1("\tATU: IOP331_OMWTVR0=0x%04x, IOP331_OIOWTVR=0x%04x\n", - *IOP331_OMWTVR0, - *IOP331_OIOWTVR); - DBG1("\tATU: IOP331_OMWTVR1=0x%04x\n", *IOP331_OMWTVR1); - DBG1("\tATU: IOP331_ATUCR=0x%08x\n", *IOP331_ATUCR); - DBG1("\tATU: IOP331_IABAR0=0x%08x IOP331_IALR0=0x%08x IOP331_IATVR0=%08x\n", *IOP331_IABAR0, *IOP331_IALR0, *IOP331_IATVR0); - DBG1("\tATU: IOP31_IABAR1=0x%08x IOP331_IALR1=0x%08x\n", *IOP331_IABAR1, *IOP331_IALR1); - DBG1("\tATU: IOP331_ERBAR=0x%08x IOP331_ERLR=0x%08x IOP331_ERTVR=%08x\n", *IOP331_ERBAR, *IOP331_ERLR, *IOP331_ERTVR); - DBG1("\tATU: IOP331_IABAR2=0x%08x IOP331_IALR2=0x%08x IOP331_IATVR2=%08x\n", *IOP331_IABAR2, *IOP331_IALR2, *IOP331_IATVR2); - DBG1("\tATU: IOP331_IABAR3=0x%08x IOP331_IALR3=0x%08x IOP331_IATVR3=%08x\n", *IOP331_IABAR3, *IOP331_IALR3, *IOP331_IATVR3); - - hook_fault_code(16+6, iop331_pci_abort, SIGBUS, "imprecise external abort"); -} - diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c deleted file mode 100644 index 3cc98d892ad..00000000000 --- a/arch/arm/mach-iop3xx/iop331-setup.c +++ /dev/null @@ -1,221 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/iop331-setup.c - * - * Author: Dave Jiang (dave.jiang@intel.com) - * Copyright (C) 2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/major.h> -#include <linux/fs.h> -#include <linux/platform_device.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_8250.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/system.h> -#include <asm/memory.h> -#include <asm/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#define IOP331_UART_XTAL 33334000 - -/* - * Standard IO mapping for all IOP331 based systems - */ -static struct map_desc iop331_std_desc[] __initdata = { - { /* mem mapped registers */ - .virtual = IOP331_VIRT_MEM_BASE, - .pfn = __phys_to_pfn(IOP331_PHYS_MEM_BASE), - .length = 0x00002000, - .type = MT_DEVICE - }, { /* PCI IO space */ - .virtual = IOP331_PCI_LOWER_IO_VA, - .pfn = __phys_to_pfn(IOP331_PCI_LOWER_IO_PA), - .length = IOP331_PCI_IO_WINDOW_SIZE, - .type = MT_DEVICE - } -}; - -static struct resource iop33x_uart0_resources[] = { - [0] = { - .start = IOP331_UART0_PHYS, - .end = IOP331_UART0_PHYS + 0x3f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP331_UART0, - .end = IRQ_IOP331_UART0, - .flags = IORESOURCE_IRQ - } -}; - -static struct resource iop33x_uart1_resources[] = { - [0] = { - .start = IOP331_UART1_PHYS, - .end = IOP331_UART1_PHYS + 0x3f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP331_UART1, - .end = IRQ_IOP331_UART1, - .flags = IORESOURCE_IRQ - } -}; - -static struct plat_serial8250_port iop33x_uart0_data[] = { - { - .membase = (char*)(IOP331_UART0_VIRT), - .mapbase = (IOP331_UART0_PHYS), - .irq = IRQ_IOP331_UART0, - .uartclk = IOP331_UART_XTAL, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_SKIP_TEST, - }, - { }, -}; - -static struct plat_serial8250_port iop33x_uart1_data[] = { - { - .membase = (char*)(IOP331_UART1_VIRT), - .mapbase = (IOP331_UART1_PHYS), - .irq = IRQ_IOP331_UART1, - .uartclk = IOP331_UART_XTAL, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_SKIP_TEST, - }, - { }, -}; - -static struct platform_device iop33x_uart0 = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev.platform_data = iop33x_uart0_data, - .num_resources = 2, - .resource = iop33x_uart0_resources, -}; - -static struct platform_device iop33x_uart1 = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, - .dev.platform_data = iop33x_uart1_data, - .num_resources = 2, - .resource = iop33x_uart1_resources, -}; - -static struct resource iop33x_i2c_0_resources[] = { - [0] = { - .start = 0xfffff680, - .end = 0xfffff698, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP331_I2C_0, - .end = IRQ_IOP331_I2C_0, - .flags = IORESOURCE_IRQ - } -}; - -static struct resource iop33x_i2c_1_resources[] = { - [0] = { - .start = 0xfffff6a0, - .end = 0xfffff6b8, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP331_I2C_1, - .end = IRQ_IOP331_I2C_1, - .flags = IORESOURCE_IRQ - } -}; - -static struct platform_device iop33x_i2c_0_controller = { - .name = "IOP3xx-I2C", - .id = 0, - .num_resources = 2, - .resource = iop33x_i2c_0_resources -}; - -static struct platform_device iop33x_i2c_1_controller = { - .name = "IOP3xx-I2C", - .id = 1, - .num_resources = 2, - .resource = iop33x_i2c_1_resources -}; - -static struct platform_device *iop33x_devices[] __initdata = { - &iop33x_uart0, - &iop33x_uart1, - &iop33x_i2c_0_controller, - &iop33x_i2c_1_controller -}; - -void __init iop33x_init(void) -{ - if(iop_is_331()) - { - platform_add_devices(iop33x_devices, - ARRAY_SIZE(iop33x_devices)); - } -} - -void __init iop331_map_io(void) -{ - iotable_init(iop331_std_desc, ARRAY_SIZE(iop331_std_desc)); -} - -#ifdef CONFIG_ARCH_IOP331 -extern void iop331_init_irq(void); -extern struct sys_timer iop331_timer; -#endif - -#ifdef CONFIG_ARCH_IQ80331 -extern void iq80331_map_io(void); -#endif - -#ifdef CONFIG_MACH_IQ80332 -extern void iq80332_map_io(void); -#endif - -#if defined(CONFIG_ARCH_IQ80331) -MACHINE_START(IQ80331, "Intel IQ80331") - /* Maintainer: Intel Corp. */ - .phys_io = 0xfefff000, - .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical - .map_io = iq80331_map_io, - .init_irq = iop331_init_irq, - .timer = &iop331_timer, - .boot_params = 0x0100, - .init_machine = iop33x_init, -MACHINE_END - -#elif defined(CONFIG_MACH_IQ80332) -MACHINE_START(IQ80332, "Intel IQ80332") - /* Maintainer: Intel Corp. */ - .phys_io = 0xfefff000, - .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical - .map_io = iq80332_map_io, - .init_irq = iop331_init_irq, - .timer = &iop331_timer, - .boot_params = 0x0100, - .init_machine = iop33x_init, -MACHINE_END - -#else -#error No machine descriptor defined for this IOP3XX implementation -#endif - - diff --git a/arch/arm/mach-iop3xx/iop331-time.c b/arch/arm/mach-iop3xx/iop331-time.c deleted file mode 100644 index 0c09e74c574..00000000000 --- a/arch/arm/mach-iop3xx/iop331-time.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iop331-time.c - * - * Timer code for IOP331 based systems - * - * Author: Dave Jiang <dave.jiang@intel.com> - * - * Copyright 2003 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/init.h> -#include <linux/timex.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> - -static inline unsigned long get_elapsed(void) -{ - return LATCH - *IOP331_TU_TCR0; -} - -static unsigned long iop331_gettimeoffset(void) -{ - unsigned long elapsed, usec; - u32 tisr1, tisr2; - - /* - * If an interrupt was pending before we read the timer, - * we've already wrapped. Factor this into the time. - * If an interrupt was pending after we read the timer, - * it may have wrapped between checking the interrupt - * status and reading the timer. Re-read the timer to - * be sure its value is after the wrap. - */ - - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr1)); - elapsed = get_elapsed(); - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr2)); - - if(tisr1 & 1) - elapsed += LATCH; - else if (tisr2 & 1) - elapsed = LATCH + get_elapsed(); - - /* - * Now convert them to usec. - */ - usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); - - return usec; -} - -static irqreturn_t -iop331_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - u32 tisr; - - write_seqlock(&xtime_lock); - - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr)); - tisr |= 1; - asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr)); - - timer_tick(regs); - - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; -} - -static struct irqaction iop331_timer_irq = { - .name = "IOP331 Timer Tick", - .handler = iop331_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER, -}; - -static void __init iop331_timer_init(void) -{ - u32 timer_ctl; - - setup_irq(IRQ_IOP331_TIMER0, &iop331_timer_irq); - - timer_ctl = IOP331_TMR_EN | IOP331_TMR_PRIVILEGED | IOP331_TMR_RELOAD | - IOP331_TMR_RATIO_1_1; - - asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (LATCH)); - - asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl)); - -} - -struct sys_timer iop331_timer = { - .init = iop331_timer_init, - .offset = iop331_gettimeoffset, -}; diff --git a/arch/arm/mach-iop3xx/iq31244-mm.c b/arch/arm/mach-iop3xx/iq31244-mm.c deleted file mode 100644 index e874b54eefe..00000000000 --- a/arch/arm/mach-iop3xx/iq31244-mm.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/mm.c - * - * Low level memory initialization for iq80321 platform - * - * Author: Rory Bolt <rorybolt@pacbell.net> - * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/mm.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> - -#include <asm/mach/map.h> - - -/* - * IQ80321 specific IO mappings - * - * We use RedBoot's setup for the onboard devices. - */ -static struct map_desc iq31244_io_desc[] __initdata = { - { /* on-board devices */ - .virtual = IQ31244_UART, - .pfn = __phys_to_pfn(IQ31244_UART), - .length = 0x00100000, - .type = MT_DEVICE - } -}; - -void __init iq31244_map_io(void) -{ - iop321_map_io(); - - iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc)); -} diff --git a/arch/arm/mach-iop3xx/iq31244-pci.c b/arch/arm/mach-iop3xx/iq31244-pci.c deleted file mode 100644 index f3c6413fa5b..00000000000 --- a/arch/arm/mach-iop3xx/iq31244-pci.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iq80321-pci.c - * - * PCI support for the Intel IQ80321 reference board - * - * Author: Rory Bolt <rorybolt@pacbell.net> - * Copyright (C) 2002 Rory Bolt - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/slab.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -/* - * The following macro is used to lookup irqs in a standard table - * format for those systems that do not already have PCI - * interrupts properly routed. We assume 1 <= pin <= 4 - */ -#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ -({ int _ctl_ = -1; \ - unsigned int _idsel = idsel - minid; \ - if (_idsel <= maxid) \ - _ctl_ = pci_irq_table[_idsel][pin-1]; \ - _ctl_; }) - -#define INTA IRQ_IQ31244_INTA -#define INTB IRQ_IQ31244_INTB -#define INTC IRQ_IQ31244_INTC -#define INTD IRQ_IQ31244_INTD - -#define INTE IRQ_IQ31244_I82546 - -static inline int __init -iq31244_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) -{ - static int pci_irq_table[][4] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ -#ifdef CONFIG_ARCH_EP80219 - {INTB, INTB, INTB, INTB}, /* CFlash */ - {INTE, INTE, INTE, INTE}, /* 82551 Pro 100 */ - {INTD, INTD, INTD, INTD}, /* PCI-X Slot */ - {INTC, INTC, INTC, INTC}, /* SATA */ -#else - {INTB, INTB, INTB, INTB}, /* CFlash */ - {INTC, INTC, INTC, INTC}, /* SATA */ - {INTD, INTD, INTD, INTD}, /* PCI-X Slot */ - {INTE, INTE, INTE, INTE}, /* 82546 GigE */ -#endif // CONFIG_ARCH_EP80219 - }; - - BUG_ON(pin < 1 || pin > 4); - - return PCI_IRQ_TABLE_LOOKUP(0, 7); -} - -static int iq31244_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP321_PCI_LOWER_IO_VA; - res[0].end = IOP321_PCI_UPPER_IO_VA; - res[0].name = "IQ31244 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP321_PCI_LOWER_MEM_PA; - res[1].end = IOP321_PCI_UPPER_MEM_PA; - res[1].name = "IQ31244 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP321_PCI_MEM_OFFSET; - sys->io_offset = IOP321_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq31244_preinit(void) -{ - iop321_init(); -} - -static struct hw_pci iq31244_pci __initdata = { - .swizzle = pci_std_swizzle, - .nr_controllers = 1, - .setup = iq31244_setup, - .scan = iop321_scan_bus, - .preinit = iq31244_preinit, - .map_irq = iq31244_map_irq -}; - -static int __init iq31244_pci_init(void) -{ - if (machine_is_iq31244()) - pci_common_init(&iq31244_pci); - return 0; -} - -subsys_initcall(iq31244_pci_init); - - - - diff --git a/arch/arm/mach-iop3xx/iq80321-mm.c b/arch/arm/mach-iop3xx/iq80321-mm.c deleted file mode 100644 index d9cac5e1fc3..00000000000 --- a/arch/arm/mach-iop3xx/iq80321-mm.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/mm.c - * - * Low level memory initialization for iq80321 platform - * - * Author: Rory Bolt <rorybolt@pacbell.net> - * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/mm.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> - -#include <asm/mach/map.h> - - -/* - * IQ80321 specific IO mappings - * - * We use RedBoot's setup for the onboard devices. - */ -static struct map_desc iq80321_io_desc[] __initdata = { - { /* on-board devices */ - .virtual = IQ80321_UART, - .pfn = __phys_to_pfn(IQ80321_UART), - .length = 0x00100000, - .type = MT_DEVICE - } -}; - -void __init iq80321_map_io(void) -{ - iop321_map_io(); - - iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc)); -} diff --git a/arch/arm/mach-iop3xx/iq80321-pci.c b/arch/arm/mach-iop3xx/iq80321-pci.c deleted file mode 100644 index d9758d3f6e7..00000000000 --- a/arch/arm/mach-iop3xx/iq80321-pci.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iq80321-pci.c - * - * PCI support for the Intel IQ80321 reference board - * - * Author: Rory Bolt <rorybolt@pacbell.net> - * Copyright (C) 2002 Rory Bolt - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/slab.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -/* - * The following macro is used to lookup irqs in a standard table - * format for those systems that do not already have PCI - * interrupts properly routed. We assume 1 <= pin <= 4 - */ -#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ -({ int _ctl_ = -1; \ - unsigned int _idsel = idsel - minid; \ - if (_idsel <= maxid) \ - _ctl_ = pci_irq_table[_idsel][pin-1]; \ - _ctl_; }) - -#define INTA IRQ_IQ80321_INTA -#define INTB IRQ_IQ80321_INTB -#define INTC IRQ_IQ80321_INTC -#define INTD IRQ_IQ80321_INTD - -#define INTE IRQ_IQ80321_I82544 - -static inline int __init -iq80321_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) -{ - static int pci_irq_table[][4] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - {INTE, INTE, INTE, INTE}, /* Gig-E */ - {-1, -1, -1, -1}, /* Unused */ - {INTC, INTD, INTA, INTB}, /* PCI-X Slot */ - {-1, -1, -1, -1}, - }; - - BUG_ON(pin < 1 || pin > 4); - -// return PCI_IRQ_TABLE_LOOKUP(4, 7); - return pci_irq_table[idsel%4][pin-1]; -} - -static int iq80321_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP321_PCI_LOWER_IO_VA; - res[0].end = IOP321_PCI_UPPER_IO_VA; - res[0].name = "IQ80321 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP321_PCI_LOWER_MEM_PA; - res[1].end = IOP321_PCI_UPPER_MEM_PA; - res[1].name = "IQ80321 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP321_PCI_MEM_OFFSET; - sys->io_offset = IOP321_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq80321_preinit(void) -{ - iop321_init(); -} - -static struct hw_pci iq80321_pci __initdata = { - .swizzle = pci_std_swizzle, - .nr_controllers = 1, - .setup = iq80321_setup, - .scan = iop321_scan_bus, - .preinit = iq80321_preinit, - .map_irq = iq80321_map_irq -}; - -static int __init iq80321_pci_init(void) -{ - if (machine_is_iq80321()) - pci_common_init(&iq80321_pci); - return 0; -} - -subsys_initcall(iq80321_pci_init); - - - - diff --git a/arch/arm/mach-iop3xx/iq80331-mm.c b/arch/arm/mach-iop3xx/iq80331-mm.c deleted file mode 100644 index 129eb49b067..00000000000 --- a/arch/arm/mach-iop3xx/iq80331-mm.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/mm.c - * - * Low level memory initialization for iq80331 platform - * - * Author: Dave Jiang <dave.jiang@intel.com> - * Copyright (C) 2003 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/mm.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> - -#include <asm/mach/map.h> - - -/* - * IQ80331 specific IO mappings - * - * We use RedBoot's setup for the onboard devices. - */ - -void __init iq80331_map_io(void) -{ - iop331_map_io(); -} diff --git a/arch/arm/mach-iop3xx/iq80331-pci.c b/arch/arm/mach-iop3xx/iq80331-pci.c deleted file mode 100644 index 40d86100249..00000000000 --- a/arch/arm/mach-iop3xx/iq80331-pci.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iq80331-pci.c - * - * PCI support for the Intel IQ80331 reference board - * - * Author: Dave Jiang <dave.jiang@intel.com> - * Copyright (C) 2003, 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/slab.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -/* - * The following macro is used to lookup irqs in a standard table - * format for those systems that do not already have PCI - * interrupts properly routed. We assume 1 <= pin <= 4 - */ -#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ -({ int _ctl_ = -1; \ - unsigned int _idsel = idsel - minid; \ - if (_idsel <= maxid) \ - _ctl_ = pci_irq_table[_idsel][pin-1]; \ - _ctl_; }) - -#define INTA IRQ_IQ80331_INTA -#define INTB IRQ_IQ80331_INTB -#define INTC IRQ_IQ80331_INTC -#define INTD IRQ_IQ80331_INTD - -//#define INTE IRQ_IQ80331_I82544 - -static inline int __init -iq80331_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) -{ - static int pci_irq_table[][4] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - {INTB, INTC, INTD, INTA}, /* PCI-X Slot */ - {INTC, INTC, INTC, INTC}, /* GigE */ - }; - - BUG_ON(pin < 1 || pin > 4); - - return PCI_IRQ_TABLE_LOOKUP(1, 7); -} - -static int iq80331_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP331_PCI_LOWER_IO_VA; - res[0].end = IOP331_PCI_UPPER_IO_VA; - res[0].name = "IQ80331 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP331_PCI_LOWER_MEM_PA; - res[1].end = IOP331_PCI_UPPER_MEM_PA; - res[1].name = "IQ80331 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP331_PCI_MEM_OFFSET; - sys->io_offset = IOP331_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq80331_preinit(void) -{ - iop331_init(); -} - -static struct hw_pci iq80331_pci __initdata = { - .swizzle = pci_std_swizzle, - .nr_controllers = 1, - .setup = iq80331_setup, - .scan = iop331_scan_bus, - .preinit = iq80331_preinit, - .map_irq = iq80331_map_irq -}; - -static int __init iq80331_pci_init(void) -{ - if (machine_is_iq80331()) - pci_common_init(&iq80331_pci); - return 0; -} - -subsys_initcall(iq80331_pci_init); - - - - diff --git a/arch/arm/mach-iop3xx/iq80332-mm.c b/arch/arm/mach-iop3xx/iq80332-mm.c deleted file mode 100644 index 2feaf7591f5..00000000000 --- a/arch/arm/mach-iop3xx/iq80332-mm.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/mm.c - * - * Low level memory initialization for iq80332 platform - * - * Author: Dave Jiang <dave.jiang@intel.com> - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/mm.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> - -#include <asm/mach/map.h> - - -/* - * IQ80332 specific IO mappings - * - * We use RedBoot's setup for the onboard devices. - */ - -void __init iq80332_map_io(void) -{ - iop331_map_io(); -} diff --git a/arch/arm/mach-iop3xx/iq80332-pci.c b/arch/arm/mach-iop3xx/iq80332-pci.c deleted file mode 100644 index afc0676318e..00000000000 --- a/arch/arm/mach-iop3xx/iq80332-pci.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iq80332-pci.c - * - * PCI support for the Intel IQ80332 reference board - * - * Author: Dave Jiang <dave.jiang@intel.com> - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/slab.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -/* - * The following macro is used to lookup irqs in a standard table - * format for those systems that do not already have PCI - * interrupts properly routed. We assume 1 <= pin <= 4 - */ -#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ -({ int _ctl_ = -1; \ - unsigned int _idsel = idsel - minid; \ - if (_idsel <= maxid) \ - _ctl_ = pci_irq_table[_idsel][pin-1]; \ - _ctl_; }) - -#define INTA IRQ_IQ80332_INTA -#define INTB IRQ_IQ80332_INTB -#define INTC IRQ_IQ80332_INTC -#define INTD IRQ_IQ80332_INTD - -//#define INTE IRQ_IQ80332_I82544 - -static inline int __init -iq80332_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) -{ - static int pci_irq_table[][8] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - {-1, -1, -1, -1}, - {-1, -1, -1, -1}, - {-1, -1, -1, -1}, - {INTA, INTB, INTC, INTD}, /* PCI-X Slot */ - {-1, -1, -1, -1}, - {INTC, INTC, INTC, INTC}, /* GigE */ - {-1, -1, -1, -1}, - {-1, -1, -1, -1}, - }; - - BUG_ON(pin < 1 || pin > 4); - - return PCI_IRQ_TABLE_LOOKUP(1, 7); -} - -static int iq80332_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP331_PCI_LOWER_IO_VA; - res[0].end = IOP331_PCI_UPPER_IO_VA; - res[0].name = "IQ80332 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP331_PCI_LOWER_MEM_PA; - res[1].end = IOP331_PCI_UPPER_MEM_PA; - res[1].name = "IQ80332 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP331_PCI_MEM_OFFSET; - sys->io_offset = IOP331_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq80332_preinit(void) -{ - iop331_init(); -} - -static struct hw_pci iq80332_pci __initdata = { - .swizzle = pci_std_swizzle, - .nr_controllers = 1, - .setup = iq80332_setup, - .scan = iop331_scan_bus, - .preinit = iq80332_preinit, - .map_irq = iq80332_map_irq -}; - -static int __init iq80332_pci_init(void) -{ - if (machine_is_iq80332()) - pci_common_init(&iq80332_pci); - return 0; -} - -subsys_initcall(iq80332_pci_init); - - - - diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 7c25dbd5a18..35dd8b3824b 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -26,6 +26,7 @@ #include <linux/bitops.h> #include <linux/time.h> #include <linux/timex.h> +#include <linux/clocksource.h> #include <asm/hardware.h> #include <asm/uaccess.h> @@ -255,16 +256,6 @@ static unsigned volatile last_jiffy_time; #define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) -/* IRQs are disabled before entering here from do_gettimeofday() */ -static unsigned long ixp4xx_gettimeoffset(void) -{ - u32 elapsed; - - elapsed = *IXP4XX_OSTS - last_jiffy_time; - - return elapsed / CLOCK_TICKS_PER_USEC; -} - static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { write_seqlock(&xtime_lock); @@ -309,7 +300,6 @@ static void __init ixp4xx_timer_init(void) struct sys_timer ixp4xx_timer = { .init = ixp4xx_timer_init, - .offset = ixp4xx_gettimeoffset, }; static struct resource ixp46x_i2c_resources[] = { @@ -365,3 +355,29 @@ void __init ixp4xx_sys_init(void) ixp4xx_exp_bus_size >> 20); } +cycle_t ixp4xx_get_cycles(void) +{ + return *IXP4XX_OSTS; +} + +static struct clocksource clocksource_ixp4xx = { + .name = "OSTS", + .rating = 200, + .read = ixp4xx_get_cycles, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .is_continuous = 1, +}; + +unsigned long ixp4xx_timer_freq = FREQ; +static int __init ixp4xx_clocksource_init(void) +{ + clocksource_ixp4xx.mult = + clocksource_hz2mult(ixp4xx_timer_freq, + clocksource_ixp4xx.shift); + clocksource_register(&clocksource_ixp4xx); + + return 0; +} + +device_initcall(ixp4xx_clocksource_init); diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 749a337494d..162c266e5f8 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -159,6 +159,8 @@ static void nslu2_power_off(void) static void __init nslu2_init(void) { + ixp4xx_timer_freq = NSLU2_FREQ; + ixp4xx_sys_init(); nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index f1958e882e8..638490e62d5 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -20,6 +20,7 @@ #include <linux/clk.h> #include <asm/io.h> +#include <asm/mach-types.h> #include <asm/arch/cpu.h> #include <asm/arch/usb.h> @@ -586,77 +587,53 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) *-------------------------------------------------------------------------*/ #ifdef CONFIG_OMAP_RESET_CLOCKS -/* - * Resets some clocks that may be left on from bootloader, - * but leaves serial clocks on. See also omap_late_clk_reset(). - */ -static inline void omap1_early_clk_reset(void) -{ - //omap_writel(0x3 << 29, MOD_CONF_CTRL_0); -} -static int __init omap1_late_clk_reset(void) +static void __init omap1_clk_disable_unused(struct clk *clk) { - /* Turn off all unused clocks */ - struct clk *p; __u32 regval32; - /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ - regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4); - omap_writew(regval32, SOFT_REQ_REG); - omap_writew(0, SOFT_REQ_REG2); - - list_for_each_entry(p, &clocks, node) { - if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) || - p->enable_reg == 0) - continue; - - /* Clocks in the DSP domain need api_ck. Just assume bootloader - * has not enabled any DSP clocks */ - if ((u32)p->enable_reg == DSP_IDLECT2) { - printk(KERN_INFO "Skipping reset check for DSP domain " - "clock \"%s\"\n", p->name); - continue; - } + /* Clocks in the DSP domain need api_ck. Just assume bootloader + * has not enabled any DSP clocks */ + if ((u32)clk->enable_reg == DSP_IDLECT2) { + printk(KERN_INFO "Skipping reset check for DSP domain " + "clock \"%s\"\n", clk->name); + return; + } - /* Is the clock already disabled? */ - if (p->flags & ENABLE_REG_32BIT) { - if (p->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readl(p->enable_reg); - else - regval32 = omap_readl(p->enable_reg); - } else { - if (p->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readw(p->enable_reg); + /* Is the clock already disabled? */ + if (clk->flags & ENABLE_REG_32BIT) { + if (clk->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readl(clk->enable_reg); else - regval32 = omap_readw(p->enable_reg); - } - - if ((regval32 & (1 << p->enable_bit)) == 0) - continue; + regval32 = omap_readl(clk->enable_reg); + } else { + if (clk->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readw(clk->enable_reg); + else + regval32 = omap_readw(clk->enable_reg); + } - /* FIXME: This clock seems to be necessary but no-one - * has asked for its activation. */ - if (p == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera - || p == &ck_dpll1out.clk // FIX: SoSSI, SSR - || p == &arm_gpio_ck // FIX: GPIO code for 1510 - ) { - printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", - p->name); - continue; - } + if ((regval32 & (1 << clk->enable_bit)) == 0) + return; - printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name); - p->disable(p); - printk(" done\n"); + /* FIXME: This clock seems to be necessary but no-one + * has asked for its activation. */ + if (clk == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera + || clk == &ck_dpll1out.clk // FIX: SoSSI, SSR + || clk == &arm_gpio_ck // FIX: GPIO code for 1510 + ) { + printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", + clk->name); + return; } - return 0; + printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name); + clk->disable(clk); + printk(" done\n"); } -late_initcall(omap1_late_clk_reset); #else -#define omap1_early_clk_reset() {} +#define omap1_clk_disable_unused NULL #endif static struct clk_functions omap1_clk_functions = { @@ -664,6 +641,7 @@ static struct clk_functions omap1_clk_functions = { .clk_disable = omap1_clk_disable, .clk_round_rate = omap1_clk_round_rate, .clk_set_rate = omap1_clk_set_rate, + .clk_disable_unused = omap1_clk_disable_unused, }; int __init omap1_clk_init(void) @@ -671,8 +649,13 @@ int __init omap1_clk_init(void) struct clk ** clkp; const struct omap_clock_config *info; int crystal_type = 0; /* Default 12 MHz */ + u32 reg; + + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + reg = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(reg, SOFT_REQ_REG); + omap_writew(0, SOFT_REQ_REG2); - omap1_early_clk_reset(); clk_init(&omap1_clk_functions); /* By default all idlect1 clocks are allowed to idle */ @@ -772,6 +755,12 @@ int __init omap1_clk_init(void) omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); #endif + /* Amstrad Delta wants BCLK high when inactive */ + if (machine_is_ams_delta()) + omap_writel(omap_readl(ULPD_CLOCK_CTRL) | + (1 << SDW_MCLK_INV_BIT), + ULPD_CLOCK_CTRL); + /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ /* (on 730, bit 13 must not be cleared) */ if (cpu_is_omap730()) diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index b7c68819c4e..f7df00205c4 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -89,6 +89,7 @@ struct arm_idlect1_clk { #define EN_DSPTIMCK 5 /* Various register defines for clock controls scattered around OMAP chip */ +#define SDW_MCLK_INV_BIT 2 /* In ULPD_CLKC_CTRL */ #define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */ #define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */ #define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */ @@ -741,6 +742,18 @@ static struct clk i2c_fck = { .disable = &omap1_clk_disable_generic, }; +static struct clk i2c_ick = { + .name = "i2c_ick", + .id = 1, + .flags = CLOCK_IN_OMAP16XX | + VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT | + ALWAYS_ENABLED, + .parent = &armper_ck.clk, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable_generic, + .disable = &omap1_clk_disable_generic, +}; + static struct clk * onchip_clks[] = { /* non-ULPD clocks */ &ck_ref, @@ -790,6 +803,7 @@ static struct clk * onchip_clks[] = { /* Virtual clocks */ &virtual_ck_mpu, &i2c_fck, + &i2c_ick, }; #endif diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index fa74ef7af15..5432335bc49 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -199,6 +199,17 @@ MUX_CFG("N14_1610_UWIRE_CS0", 8, 9, 1, 1, 21, 0, 1, 1, 1) MUX_CFG("P15_1610_UWIRE_CS3", 8, 12, 1, 1, 22, 0, 1, 1, 1) MUX_CFG("N15_1610_UWIRE_CS1", 7, 18, 2, 1, 14, 0, NA, 0, 1) +/* OMAP-1610 SPI */ +MUX_CFG("U19_1610_SPIF_SCK", 7, 21, 6, 1, 15, 0, 1, 1, 1) +MUX_CFG("U18_1610_SPIF_DIN", 8, 0, 6, 1, 18, 1, 1, 0, 1) +MUX_CFG("P20_1610_SPIF_DIN", 6, 27, 4, 1, 7, 1, 1, 0, 1) +MUX_CFG("W21_1610_SPIF_DOUT", 8, 3, 6, 1, 19, 0, 1, 0, 1) +MUX_CFG("R18_1610_SPIF_DOUT", 7, 9, 3, 1, 11, 0, 1, 0, 1) +MUX_CFG("N14_1610_SPIF_CS0", 8, 9, 6, 1, 21, 0, 1, 1, 1) +MUX_CFG("N15_1610_SPIF_CS1", 7, 18, 6, 1, 14, 0, 1, 1, 1) +MUX_CFG("T19_1610_SPIF_CS2", 7, 15, 4, 1, 13, 0, 1, 1, 1) +MUX_CFG("P15_1610_SPIF_CS3", 8, 12, 3, 1, 22, 0, 1, 1, 1) + /* OMAP-1610 Flash */ MUX_CFG("L3_1610_FLASH_CS2B_OE",10, 6, 1, NA, 0, 0, NA, 0, 1) MUX_CFG("M8_1610_FLASH_CS2B_WE",10, 3, 1, NA, 0, 0, NA, 0, 1) diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 7993b7bae2b..2db6b732b08 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -166,8 +166,8 @@ static struct omap_uart_config apollon_uart_config __initdata = { static struct omap_mmc_config apollon_mmc_config __initdata = { .mmc [0] = { - .enabled = 0, - .wire4 = 0, + .enabled = 1, + .wire4 = 1, .wp_pin = -1, .power_pin = -1, .switch_pin = -1, @@ -257,6 +257,9 @@ static void __init omap_apollon_init(void) /* REVISIT: where's the correct place */ omap_cfg_reg(W19_24XX_SYS_NIRQ); + /* Use Interal loop-back in MMC/SDIO Module Input Clock selection */ + CONTROL_DEVCONF |= (1 << 24); + /* * Make sure the serial ports are muxed on at this point. * You have to mux them off in device drivers later on diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index d1b648a4efb..0de201c3d50 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -32,10 +32,14 @@ #include "memory.h" #include "clock.h" +#undef DEBUG + //#define DOWN_VARIABLE_DPLL 1 /* Experimental */ static struct prcm_config *curr_prcm_set; static u32 curr_perf_level = PRCM_FULL_SPEED; +static struct clk *vclk; +static struct clk *sclk; /*------------------------------------------------------------------------- * Omap2 specific clock functions @@ -79,6 +83,14 @@ static void omap2_propagate_rate(struct clk * clk) propagate_rate(clk); } +static void omap2_set_osc_ck(int enable) +{ + if (enable) + PRCM_CLKSRC_CTRL &= ~(0x3 << 3); + else + PRCM_CLKSRC_CTRL |= 0x3 << 3; +} + /* Enable an APLL if off */ static void omap2_clk_fixed_enable(struct clk *clk) { @@ -101,12 +113,54 @@ static void omap2_clk_fixed_enable(struct clk *clk) else if (clk == &apll54_ck) cval = (1 << 6); - while (!CM_IDLEST_CKGEN & cval) { /* Wait for lock */ + while (!(CM_IDLEST_CKGEN & cval)) { /* Wait for lock */ ++i; udelay(1); - if (i == 100000) + if (i == 100000) { + printk(KERN_ERR "Clock %s didn't lock\n", clk->name); + break; + } + } +} + +static void omap2_clk_wait_ready(struct clk *clk) +{ + unsigned long reg, other_reg, st_reg; + u32 bit; + int i; + + reg = (unsigned long) clk->enable_reg; + if (reg == (unsigned long) &CM_FCLKEN1_CORE || + reg == (unsigned long) &CM_FCLKEN2_CORE) + other_reg = (reg & ~0xf0) | 0x10; + else if (reg == (unsigned long) &CM_ICLKEN1_CORE || + reg == (unsigned long) &CM_ICLKEN2_CORE) + other_reg = (reg & ~0xf0) | 0x00; + else + return; + + /* No check for DSS or cam clocks */ + if ((reg & 0x0f) == 0) { + if (clk->enable_bit <= 1 || clk->enable_bit == 31) + return; + } + + /* Check if both functional and interface clocks + * are running. */ + bit = 1 << clk->enable_bit; + if (!(__raw_readl(other_reg) & bit)) + return; + st_reg = (other_reg & ~0xf0) | 0x20; + i = 0; + while (!(__raw_readl(st_reg) & bit)) { + i++; + if (i == 100000) { + printk(KERN_ERR "Timeout enabling clock %s\n", clk->name); break; + } } + if (i) + pr_debug("Clock %s stable after %d loops\n", clk->name, i); } /* Enables clock without considering parent dependencies or use count @@ -119,6 +173,11 @@ static int _omap2_clk_enable(struct clk * clk) if (clk->flags & ALWAYS_ENABLED) return 0; + if (unlikely(clk == &osc_ck)) { + omap2_set_osc_ck(1); + return 0; + } + if (unlikely(clk->enable_reg == 0)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", clk->name); @@ -133,6 +192,9 @@ static int _omap2_clk_enable(struct clk * clk) regval32 = __raw_readl(clk->enable_reg); regval32 |= (1 << clk->enable_bit); __raw_writel(regval32, clk->enable_reg); + wmb(); + + omap2_clk_wait_ready(clk); return 0; } @@ -155,6 +217,11 @@ static void _omap2_clk_disable(struct clk *clk) { u32 regval32; + if (unlikely(clk == &osc_ck)) { + omap2_set_osc_ck(0); + return; + } + if (clk->enable_reg == 0) return; @@ -166,6 +233,7 @@ static void _omap2_clk_disable(struct clk *clk) regval32 = __raw_readl(clk->enable_reg); regval32 &= ~(1 << clk->enable_bit); __raw_writel(regval32, clk->enable_reg); + wmb(); } static int omap2_clk_enable(struct clk *clk) @@ -695,12 +763,14 @@ static int omap2_clk_set_rate(struct clk *clk, unsigned long rate) reg_val = __raw_readl(reg); reg_val &= ~(field_mask << div_off); reg_val |= (field_val << div_off); - __raw_writel(reg_val, reg); + wmb(); clk->rate = clk->parent->rate / field_val; - if (clk->flags & DELAYED_APP) + if (clk->flags & DELAYED_APP) { __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL); + wmb(); + } ret = 0; } else if (clk->set_rate != 0) ret = clk->set_rate(clk, rate); @@ -836,10 +906,12 @@ static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) reg_val = __raw_readl(reg) & ~(field_mask << src_off); reg_val |= (field_val << src_off); __raw_writel(reg_val, reg); + wmb(); - if (clk->flags & DELAYED_APP) + if (clk->flags & DELAYED_APP) { __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL); - + wmb(); + } if (clk->usecount > 0) _omap2_clk_enable(clk); @@ -953,12 +1025,29 @@ static int omap2_select_table_rate(struct clk * clk, unsigned long rate) * Omap2 clock reset and init functions *-------------------------------------------------------------------------*/ +#ifdef CONFIG_OMAP_RESET_CLOCKS +static void __init omap2_clk_disable_unused(struct clk *clk) +{ + u32 regval32; + + regval32 = __raw_readl(clk->enable_reg); + if ((regval32 & (1 << clk->enable_bit)) == 0) + return; + + printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name); + _omap2_clk_disable(clk); +} +#else +#define omap2_clk_disable_unused NULL +#endif + static struct clk_functions omap2_clk_functions = { .clk_enable = omap2_clk_enable, .clk_disable = omap2_clk_disable, .clk_round_rate = omap2_clk_round_rate, .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, + .clk_disable_unused = omap2_clk_disable_unused, }; static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys) @@ -984,27 +1073,19 @@ static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys) sys->rate = sclk; } -#ifdef CONFIG_OMAP_RESET_CLOCKS -static void __init omap2_disable_unused_clocks(void) +/* + * Set clocks for bypass mode for reboot to work. + */ +void omap2_clk_prepare_for_reboot(void) { - struct clk *ck; - u32 regval32; + u32 rate; - list_for_each_entry(ck, &clocks, node) { - if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) || - ck->enable_reg == 0) - continue; - - regval32 = __raw_readl(ck->enable_reg); - if ((regval32 & (1 << ck->enable_bit)) == 0) - continue; + if (vclk == NULL || sclk == NULL) + return; - printk(KERN_INFO "Disabling unused clock \"%s\"\n", ck->name); - _omap2_clk_disable(ck); - } + rate = clk_get_rate(sclk); + clk_set_rate(vclk, rate); } -late_initcall(omap2_disable_unused_clocks); -#endif /* * Switch the MPU rate if specified on cmdline. @@ -1077,8 +1158,27 @@ int __init omap2_clk_init(void) */ clk_enable(&sync_32k_ick); clk_enable(&omapctrl_ick); + + /* Force the APLLs active during bootup to avoid disabling and + * enabling them unnecessarily. */ + clk_enable(&apll96_ck); + clk_enable(&apll54_ck); + if (cpu_is_omap2430()) clk_enable(&sdrc_ick); + /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ + vclk = clk_get(NULL, "virt_prcm_set"); + sclk = clk_get(NULL, "sys_ck"); + + return 0; +} + +static int __init omap2_disable_aplls(void) +{ + clk_disable(&apll96_ck); + clk_disable(&apll54_ck); + return 0; } +late_initcall(omap2_disable_aplls); diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 2781dfbc516..8816f5a33a2 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -560,7 +560,7 @@ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", .rate = 26000000, /* fixed up in clock init */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + RATE_FIXED | RATE_PROPAGATES, }; /* With out modem likely 12MHz, with modem likely 13MHz */ @@ -1368,7 +1368,8 @@ static struct clk mcbsp5_fck = { }; static struct clk mcspi1_ick = { - .name = "mcspi1_ick", + .name = "mcspi_ick", + .id = 1, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, @@ -1377,7 +1378,8 @@ static struct clk mcspi1_ick = { }; static struct clk mcspi1_fck = { - .name = "mcspi1_fck", + .name = "mcspi_fck", + .id = 1, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, @@ -1386,7 +1388,8 @@ static struct clk mcspi1_fck = { }; static struct clk mcspi2_ick = { - .name = "mcspi2_ick", + .name = "mcspi_ick", + .id = 2, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, @@ -1395,7 +1398,8 @@ static struct clk mcspi2_ick = { }; static struct clk mcspi2_fck = { - .name = "mcspi2_fck", + .name = "mcspi_fck", + .id = 2, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, @@ -1404,7 +1408,8 @@ static struct clk mcspi2_fck = { }; static struct clk mcspi3_ick = { - .name = "mcspi3_ick", + .name = "mcspi_ick", + .id = 3, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, @@ -1413,7 +1418,8 @@ static struct clk mcspi3_ick = { }; static struct clk mcspi3_fck = { - .name = "mcspi3_fck", + .name = "mcspi_fck", + .id = 3, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index c7a48f921fe..f4f04d87df3 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -13,6 +13,8 @@ #include <linux/init.h> #include <linux/err.h> #include <linux/clk.h> +#include <linux/ioport.h> +#include <linux/spinlock.h> #include <asm/io.h> #include <asm/arch/gpmc.h> @@ -41,6 +43,19 @@ #define GPMC_CS0 0x60 #define GPMC_CS_SIZE 0x30 +#define GPMC_CS_NUM 8 +#define GPMC_MEM_START 0x00000000 +#define GPMC_MEM_END 0x3FFFFFFF +#define BOOT_ROM_SPACE 0x100000 /* 1MB */ + +#define GPMC_CHUNK_SHIFT 24 /* 16 MB */ +#define GPMC_SECTION_SHIFT 28 /* 128 MB */ + +static struct resource gpmc_mem_root; +static struct resource gpmc_cs_mem[GPMC_CS_NUM]; +static spinlock_t gpmc_mem_lock = SPIN_LOCK_UNLOCKED; +static unsigned gpmc_cs_map; + static void __iomem *gpmc_base = (void __iomem *) IO_ADDRESS(GPMC_BASE); static void __iomem *gpmc_cs_base = @@ -187,9 +202,168 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) return 0; } -unsigned long gpmc_cs_get_base_addr(int cs) +static void gpmc_cs_enable_mem(int cs, u32 base, u32 size) +{ + u32 l; + u32 mask; + + mask = (1 << GPMC_SECTION_SHIFT) - size; + l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); + l &= ~0x3f; + l = (base >> GPMC_CHUNK_SHIFT) & 0x3f; + l &= ~(0x0f << 8); + l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8; + l |= 1 << 6; /* CSVALID */ + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l); +} + +static void gpmc_cs_disable_mem(int cs) +{ + u32 l; + + l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); + l &= ~(1 << 6); /* CSVALID */ + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l); +} + +static void gpmc_cs_get_memconf(int cs, u32 *base, u32 *size) +{ + u32 l; + u32 mask; + + l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); + *base = (l & 0x3f) << GPMC_CHUNK_SHIFT; + mask = (l >> 8) & 0x0f; + *size = (1 << GPMC_SECTION_SHIFT) - (mask << GPMC_CHUNK_SHIFT); +} + +static int gpmc_cs_mem_enabled(int cs) +{ + u32 l; + + l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); + return l & (1 << 6); +} + +static void gpmc_cs_set_reserved(int cs, int reserved) { - return (gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7) & 0x1f) << 24; + gpmc_cs_map &= ~(1 << cs); + gpmc_cs_map |= (reserved ? 1 : 0) << cs; +} + +static int gpmc_cs_reserved(int cs) +{ + return gpmc_cs_map & (1 << cs); +} + +static unsigned long gpmc_mem_align(unsigned long size) +{ + int order; + + size = (size - 1) >> (GPMC_CHUNK_SHIFT - 1); + order = GPMC_CHUNK_SHIFT - 1; + do { + size >>= 1; + order++; + } while (size); + size = 1 << order; + return size; +} + +static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size) +{ + struct resource *res = &gpmc_cs_mem[cs]; + int r; + + size = gpmc_mem_align(size); + spin_lock(&gpmc_mem_lock); + res->start = base; + res->end = base + size - 1; + r = request_resource(&gpmc_mem_root, res); + spin_unlock(&gpmc_mem_lock); + + return r; +} + +int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) +{ + struct resource *res = &gpmc_cs_mem[cs]; + int r = -1; + + if (cs > GPMC_CS_NUM) + return -ENODEV; + + size = gpmc_mem_align(size); + if (size > (1 << GPMC_SECTION_SHIFT)) + return -ENOMEM; + + spin_lock(&gpmc_mem_lock); + if (gpmc_cs_reserved(cs)) { + r = -EBUSY; + goto out; + } + if (gpmc_cs_mem_enabled(cs)) + r = adjust_resource(res, res->start & ~(size - 1), size); + if (r < 0) + r = allocate_resource(&gpmc_mem_root, res, size, 0, ~0, + size, NULL, NULL); + if (r < 0) + goto out; + + gpmc_cs_enable_mem(cs, res->start, res->end - res->start + 1); + *base = res->start; + gpmc_cs_set_reserved(cs, 1); +out: + spin_unlock(&gpmc_mem_lock); + return r; +} + +void gpmc_cs_free(int cs) +{ + spin_lock(&gpmc_mem_lock); + if (cs >= GPMC_CS_NUM || !gpmc_cs_reserved(cs)) { + printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs); + BUG(); + spin_unlock(&gpmc_mem_lock); + return; + } + gpmc_cs_disable_mem(cs); + release_resource(&gpmc_cs_mem[cs]); + gpmc_cs_set_reserved(cs, 0); + spin_unlock(&gpmc_mem_lock); +} + +void __init gpmc_mem_init(void) +{ + int cs; + unsigned long boot_rom_space = 0; + + if (cpu_is_omap242x()) { + u32 l; + l = omap_readl(OMAP242X_CONTROL_STATUS); + /* In case of internal boot the 1st MB is redirected to the + * boot ROM memory space. + */ + if (l & (1 << 3)) + boot_rom_space = BOOT_ROM_SPACE; + } else + /* We assume internal boot if the mode can't be + * determined. + */ + boot_rom_space = BOOT_ROM_SPACE; + gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space; + gpmc_mem_root.end = GPMC_MEM_END; + + /* Reserve all regions that has been set up by bootloader */ + for (cs = 0; cs < GPMC_CS_NUM; cs++) { + u32 base, size; + + if (!gpmc_cs_mem_enabled(cs)) + continue; + gpmc_cs_get_memconf(cs, &base, &size); + if (gpmc_cs_insert_mem(cs, base, size) < 0) + BUG(); + } } void __init gpmc_init(void) @@ -206,4 +380,6 @@ void __init gpmc_init(void) l &= 0x03 << 3; l |= (0x02 << 3) | (1 << 0); gpmc_write_reg(GPMC_SYSCONFIG, l); + + gpmc_mem_init(); } diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index dfc3b35cc1f..1ed2fff4691 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -41,18 +41,6 @@ static struct omap_irq_bank { .nr_irqs = 96, }, { /* XXX: DSP INTC */ - -#if 0 - /* - * Commented out for now until we fix the IVA clocking - */ -#ifdef CONFIG_ARCH_OMAP2420 - }, { - /* IVA INTC (2420 only) */ - .base_reg = OMAP24XX_IVA_INTC_BASE, - .nr_irqs = 16, /* Actually 32, but only 16 are used */ -#endif -#endif } }; diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 60ef084faff..f538d0fdb13 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -104,6 +104,20 @@ MUX_CFG_24XX("P20_24XX_TSC_IRQ", 0x108, 0, 0, 0, 1) MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1) MUX_CFG_24XX("K14_24XX_UART3_RX", 0x119, 0, 0, 0, 1) +/* MMC/SDIO */ +MUX_CFG_24XX("G19_24XX_MMC_CLKO", 0x0f3, 0, 0, 0, 1) +MUX_CFG_24XX("H18_24XX_MMC_CMD", 0x0f4, 0, 0, 0, 1) +MUX_CFG_24XX("F20_24XX_MMC_DAT0", 0x0f5, 0, 0, 0, 1) +MUX_CFG_24XX("H14_24XX_MMC_DAT1", 0x0f6, 0, 0, 0, 1) +MUX_CFG_24XX("E19_24XX_MMC_DAT2", 0x0f7, 0, 0, 0, 1) +MUX_CFG_24XX("D19_24XX_MMC_DAT3", 0x0f8, 0, 0, 0, 1) +MUX_CFG_24XX("F19_24XX_MMC_DAT_DIR0", 0x0f9, 0, 0, 0, 1) +MUX_CFG_24XX("E20_24XX_MMC_DAT_DIR1", 0x0fa, 0, 0, 0, 1) +MUX_CFG_24XX("F18_24XX_MMC_DAT_DIR2", 0x0fb, 0, 0, 0, 1) +MUX_CFG_24XX("E18_24XX_MMC_DAT_DIR3", 0x0fc, 0, 0, 0, 1) +MUX_CFG_24XX("G18_24XX_MMC_CMD_DIR", 0x0fd, 0, 0, 0, 1) +MUX_CFG_24XX("H15_24XX_MMC_CLKI", 0x0fe, 0, 0, 0, 1) + /* Keypad GPIO*/ MUX_CFG_24XX("T19_24XX_KBR0", 0x106, 3, 1, 1, 1) MUX_CFG_24XX("R19_24XX_KBR1", 0x107, 3, 1, 1, 1) diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index c2bf57ef682..90f530540c6 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -19,6 +19,8 @@ #include "prcm-regs.h" +extern void omap2_clk_prepare_for_reboot(void); + u32 omap_prcm_get_reset_sources(void) { return RM_RSTST_WKUP & 0x7f; @@ -28,12 +30,6 @@ EXPORT_SYMBOL(omap_prcm_get_reset_sources); /* Resets clock rates and reboots the system. Only called from system.h */ void omap_prcm_arch_reset(char mode) { - u32 rate; - struct clk *vclk, *sclk; - - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); - rate = clk_get_rate(sclk); - clk_set_rate(vclk, rate); /* go to bypass for OMAP limitation */ + omap2_clk_prepare_for_reboot(); RM_RSTCTRL_WKUP |= 2; } diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index bbd138be6a7..df37594c30f 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -2,6 +2,13 @@ if ARCH_S3C2410 menu "S3C24XX Implementations" +config MACH_AML_M5900 + bool "AML M5900 Series" + select CPU_S3C2410 + help + Say Y here if you are using the American Microsystems M5900 Series + <http://www.amltd.com> + config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select CPU_S3C2440 @@ -126,6 +133,12 @@ config MACH_NEXCODER_2440 help Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board +config MACH_VSTMS + bool "VMSTMS" + select CPU_S3C2412 + help + Say Y here if you are using an VSTMS board + endmenu config S3C2410_CLOCK @@ -133,10 +146,24 @@ config S3C2410_CLOCK help Clock code for the S3C2410, and similar processors +config S3C2410_PM + bool + depends on CONFIG_PM + help + Power Management code common to S3C2410 and better + +config CPU_S3C2410_DMA + bool + depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442) + default y if CPU_S3C2410 || CPU_S3C2442 + help + DMA device selection for S3C2410 and compatible CPUs + config CPU_S3C2410 bool depends on ARCH_S3C2410 select S3C2410_CLOCK + select S3C2410_PM help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. @@ -149,6 +176,13 @@ config CPU_S3C2412_ONLY !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412 default y if CPU_S3C2412 +config S3C2412_PM + bool + default y if PM + depends on CPU_S3C2412 + help + Internal config node to apply S3C2412 power management + config CPU_S3C2412 bool depends on ARCH_S3C2410 @@ -165,6 +199,7 @@ config CPU_S3C2440 bool depends on ARCH_S3C2410 select S3C2410_CLOCK + select S3C2410_PM select CPU_S3C244X help Support for S3C2440 Samsung Mobile CPU based systems. @@ -173,6 +208,7 @@ config CPU_S3C2442 bool depends on ARCH_S3C2420 select S3C2410_CLOCK + select S3C2410_PM select CPU_S3C244X help Support for S3C2442 Samsung Mobile CPU based systems. @@ -256,7 +292,7 @@ config S3C2410_PM_CHECK_CHUNKSIZE config PM_SIMTEC bool - depends on PM && (ARCH_BAST || MACH_VR1000) + depends on PM && (ARCH_BAST || MACH_VR1000 || MACH_AML_M5900) default y config S3C2410_LOWLEVEL_UART_PORT diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 0eadec91621..d66013365b6 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -9,6 +9,8 @@ obj-y := cpu.o irq.o time.o gpio.o clock.o devs.o obj-m := obj-n := obj- := +obj-dma-y := +obj-dma-n := # DMA obj-$(CONFIG_S3C2410_DMA) += dma.o @@ -20,6 +22,10 @@ obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o +obj-$(CONFIG_CPU_S3C2410) += s3c2410-irq.o + +obj-$(CONFIG_S3C2410_PM) += s3c2410-pm.o s3c2410-sleep.o +obj-$(CONFIG_CPU_S3C2410_DMA) += s3c2410-dma.o # Power Management support @@ -30,6 +36,9 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_CPU_S3C2412) += s3c2412-irq.o obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o +obj-dma-$(CONFIG_CPU_S3C2412) += s3c2412-dma.o + +obj-$(CONFIG_S3C2412_PM) += s3c2412-pm.o # # S3C244X support @@ -47,6 +56,7 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o +obj-dma-$(CONFIG_CPU_S3C2440) += s3c2440-dma.o # S3C2442 support @@ -57,8 +67,13 @@ obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o +# merge in dma objects + +obj-y += $(obj-dma-y) + # machine specific support +obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o @@ -71,5 +86,6 @@ obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o obj-$(CONFIG_MACH_OTOM) += mach-otom.o obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o +obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o obj-$(CONFIG_MACH_SMDK) += common-smdk.o
\ No newline at end of file diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index def4441d244..440e9aa0211 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -18,10 +18,6 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Modifications: - * 08-Jan-2003 BJD Moved from central IRQ code - * 21-Aug-2005 BJD Fixed missing code and compile errors */ diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c index 1c3c6adae6c..9d4899eddf1 100644 --- a/arch/arm/mach-s3c2410/cpu.c +++ b/arch/arm/mach-s3c2410/cpu.c @@ -124,6 +124,15 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s3c2412_init, .name = name_s3c2412, }, + { /* a newer version of the s3c2412 */ + .idcode = 0x32412003, + .idmask = 0xffffffff, + .map_io = s3c2412_map_io, + .init_clocks = s3c2412_init_clocks, + .init_uarts = s3c2412_init_uarts, + .init = s3c2412_init, + .name = name_s3c2412, + }, { .idcode = 0x0, /* S3C2400 doesn't have an idcode */ .idmask = 0xffffffff, diff --git a/arch/arm/mach-s3c2410/devs.h b/arch/arm/mach-s3c2410/devs.h index 726e2eaf879..14fb0bade71 100644 --- a/arch/arm/mach-s3c2410/devs.h +++ b/arch/arm/mach-s3c2410/devs.h @@ -8,11 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 18-Aug-2004 BJD Created initial version - * 27-Aug-2004 BJD Added timers 0 through 3 - * 10-Feb-2005 BJD Added camera from guillaume.gourat@nexvision.tv */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index cc92a7b2db8..d264bbbd8be 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -1,35 +1,16 @@ -/* linux/arch/arm/mach-bast/dma.c +/* linux/arch/arm/mach-s3c2410/dma.c * - * (c) 2003-2005 Simtec Electronics + * (c) 2003-2005,2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2410 DMA core * - * http://www.simtec.co.uk/products/EB2410ITX/ + * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 27-Feb-2005 BJD Added kmem cache for dma descriptors - * 18-Nov-2004 BJD Removed error for loading onto stopped channel - * 10-Nov-2004 BJD Ensure all external symbols exported for modules - * 10-Nov-2004 BJD Use sys_device and sysdev_class for power management - * 08-Aug-2004 BJD Apply rmk's suggestions - * 21-Jul-2004 BJD Ported to linux 2.6 - * 12-Jul-2004 BJD Finished re-write and change of API - * 06-Jul-2004 BJD Rewrote dma code to try and cope with various problems - * 23-May-2003 BJD Created file - * 19-Aug-2003 BJD Cleanup, header fix, added URL - * - * This file is based on the Sangwook Lee/Samsung patches, re-written due - * to various ommisions from the code (such as flexible dma configuration) - * for use with the BAST system board. - * - * The re-write is pretty much complete, and should be good enough for any - * possible DMA function - */ +*/ #ifdef CONFIG_S3C2410_DMA_DEBUG @@ -55,10 +36,14 @@ #include <asm/mach/dma.h> #include <asm/arch/map.h> +#include "dma.h" + /* io map for dma */ static void __iomem *dma_base; static kmem_cache_t *dma_kmem; +struct s3c24xx_dma_selection dma_sel; + /* dma channel state information */ struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; @@ -79,7 +64,6 @@ dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val) pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg); writel(val, dma_regaddr(chan, reg)); } - #endif #define dma_rdreg(chan, reg) readl((chan)->regs + (reg)) @@ -151,12 +135,20 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan) #define dbg_showchan(chan) do { } while(0) #endif /* CONFIG_S3C2410_DMA_DEBUG */ -#define check_channel(chan) \ - do { if ((chan) >= S3C2410_DMA_CHANNELS) { \ - printk(KERN_ERR "%s: invalid channel %d\n", __FUNCTION__, (chan)); \ - return -EINVAL; \ - } } while(0) +static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX]; +/* lookup_dma_channel + * + * change the dma channel number given into a real dma channel id +*/ + +static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel) +{ + if (channel & DMACH_LOW_LEVEL) + return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL]; + else + return dma_chan_map[channel]; +} /* s3c2410_dma_stats_timeout * @@ -321,8 +313,10 @@ static inline void s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf, enum s3c2410_dma_buffresult result) { +#if 0 pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n", chan->callback_fn, buf, buf->id, buf->size, result); +#endif if (chan->callback_fn != NULL) { (chan->callback_fn)(chan, buf->id, buf->size, result); @@ -439,7 +433,6 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) return 0; } - /* s3c2410_dma_enqueue * * queue an given buffer for dma transfer. @@ -460,11 +453,12 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) int s3c2410_dma_enqueue(unsigned int channel, void *id, dma_addr_t data, int size) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); struct s3c2410_dma_buf *buf; unsigned long flags; - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: id=%p, data=%08x, size=%d\n", __FUNCTION__, id, (unsigned int)data, size); @@ -562,8 +556,10 @@ s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf) static inline void s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) { +#if 0 pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n", chan->number, chan->load_state); +#endif switch (chan->load_state) { case S3C2410_DMALOAD_NONE: @@ -718,7 +714,8 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs) if (chan->load_state == S3C2410_DMALOAD_NONE) { pr_debug("dma%d: end of transfer, stopping channel (%ld)\n", chan->number, jiffies); - s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP); + s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, + S3C2410_DMAOP_STOP); } } @@ -726,37 +723,34 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs) return IRQ_HANDLED; } +static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); + /* s3c2410_request_dma * * get control of an dma channel */ -int s3c2410_dma_request(unsigned int channel, struct s3c2410_dma_client *client, +int s3c2410_dma_request(unsigned int channel, + struct s3c2410_dma_client *client, void *dev) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan; unsigned long flags; int err; pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n", channel, client->name, dev); - check_channel(channel); - local_irq_save(flags); - dbg_showchan(chan); - - if (chan->in_use) { - if (client != chan->client) { - printk(KERN_ERR "dma%d: already in use\n", channel); - local_irq_restore(flags); - return -EBUSY; - } else { - printk(KERN_ERR "dma%d: client already has channel\n", channel); - } + chan = s3c2410_dma_map_channel(channel); + if (chan == NULL) { + local_irq_restore(flags); + return -EBUSY; } + dbg_showchan(chan); + chan->client = client; chan->in_use = 1; @@ -809,14 +803,14 @@ EXPORT_SYMBOL(s3c2410_dma_request); int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); unsigned long flags; - check_channel(channel); + if (chan == NULL) + return -EINVAL; local_irq_save(flags); - if (chan->client != client) { printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n", channel, chan->client, client); @@ -837,8 +831,12 @@ int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) if (chan->irq_claimed) free_irq(chan->irq, (void *)chan); + chan->irq_claimed = 0; + if (!(channel & DMACH_LOW_LEVEL)) + dma_chan_map[channel] = NULL; + local_irq_restore(flags); return 0; @@ -848,8 +846,8 @@ EXPORT_SYMBOL(s3c2410_dma_free); static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan) { - unsigned long tmp; unsigned long flags; + unsigned long tmp; pr_debug("%s:\n", __FUNCTION__); @@ -997,9 +995,10 @@ s3c2410_dma_started(struct s3c2410_dma_chan *chan) int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; switch (op) { case S3C2410_DMAOP_START: @@ -1046,12 +1045,19 @@ int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", __FUNCTION__, channel, xferunit, dcon); - check_channel(channel); + if (chan == NULL) + return -EINVAL; + + printk("Initial dcon is %08x\n", dcon); + + dcon |= chan->dcon & dma_sel.dcon_mask; + + printk("New dcon is %08x\n", dcon); switch (xferunit) { case 1: @@ -1086,9 +1092,10 @@ EXPORT_SYMBOL(s3c2410_dma_config); int s3c2410_dma_setflags(dmach_t channel, unsigned int flags) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags); @@ -1106,9 +1113,10 @@ EXPORT_SYMBOL(s3c2410_dma_setflags); int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn); @@ -1121,9 +1129,10 @@ EXPORT_SYMBOL(s3c2410_dma_set_opfn); int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn); @@ -1153,9 +1162,10 @@ int s3c2410_dma_devconfig(int channel, int hwcfg, unsigned long devaddr) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n", __FUNCTION__, (int)source, hwcfg, devaddr); @@ -1200,9 +1210,10 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig); int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; if (src != NULL) *src = dma_rdreg(chan, S3C2410_DMA_DCSRC); @@ -1252,7 +1263,7 @@ static int s3c2410_dma_resume(struct sys_device *dev) #define s3c2410_dma_resume NULL #endif /* CONFIG_PM */ -static struct sysdev_class dma_sysclass = { +struct sysdev_class dma_sysclass = { set_kset_name("s3c24xx-dma"), .suspend = s3c2410_dma_suspend, .resume = s3c2410_dma_resume, @@ -1265,7 +1276,6 @@ static void s3c2410_dma_cache_ctor(void *p, kmem_cache_t *c, unsigned long f) memset(p, 0, sizeof(struct s3c2410_dma_buf)); } - /* initialisation code */ static int __init s3c2410_init_dma(void) @@ -1274,7 +1284,7 @@ static int __init s3c2410_init_dma(void) int channel; int ret; - printk("S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics\n"); + printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n"); dma_base = ioremap(S3C24XX_PA_DMA, 0x200); if (dma_base == NULL) { @@ -1282,6 +1292,8 @@ static int __init s3c2410_init_dma(void) return -ENOMEM; } + printk("Registering sysclass\n"); + ret = sysdev_class_register(&dma_sysclass); if (ret != 0) { printk(KERN_ERR "dma sysclass registration failed\n"); @@ -1335,4 +1347,95 @@ static int __init s3c2410_init_dma(void) return ret; } -__initcall(s3c2410_init_dma); +core_initcall(s3c2410_init_dma); + +static inline int is_channel_valid(unsigned int channel) +{ + return (channel & DMA_CH_VALID); +} + +/* s3c2410_dma_map_channel() + * + * turn the virtual channel number into a real, and un-used hardware + * channel. + * + * currently this code uses first-free channel from the specified harware + * map, not taking into account anything that the board setup code may + * have to say about the likely peripheral set to be in use. +*/ + +struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) +{ + struct s3c24xx_dma_map *ch_map; + struct s3c2410_dma_chan *dmach; + int ch; + + if (dma_sel.map == NULL || channel > dma_sel.map_size) + return NULL; + + ch_map = dma_sel.map + channel; + + for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) { + if (!is_channel_valid(ch_map->channels[ch])) + continue; + + if (s3c2410_chans[ch].in_use == 0) { + printk("mapped channel %d to %d\n", channel, ch); + break; + } + } + + if (ch >= S3C2410_DMA_CHANNELS) + return NULL; + + /* update our channel mapping */ + + dmach = &s3c2410_chans[ch]; + dma_chan_map[channel] = dmach; + + /* select the channel */ + + (dma_sel.select)(dmach, ch_map); + + return dmach; +} + +static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch) +{ + /* show the channel configuration */ + + printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name, + (is_channel_valid(map->channels[0]) ? '0' : '-'), + (is_channel_valid(map->channels[1]) ? '1' : '-'), + (is_channel_valid(map->channels[2]) ? '2' : '-'), + (is_channel_valid(map->channels[3]) ? '3' : '-')); +} + +static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch) +{ + if (1) + s3c24xx_dma_show_ch(map, ch); + + return 0; +} + +int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel) +{ + struct s3c24xx_dma_map *nmap; + size_t map_sz = sizeof(*nmap) * sel->map_size; + int ptr; + + nmap = kmalloc(map_sz, GFP_KERNEL); + if (nmap == NULL) + return -ENOMEM; + + memcpy(nmap, sel->map, map_sz); + memcpy(&dma_sel, sel, sizeof(*sel)); + + dma_sel.map = nmap; + + for (ptr = 0; ptr < sel->map_size; ptr++) + s3c24xx_dma_check_entry(nmap+ptr, ptr); + + return 0; +} diff --git a/arch/arm/mach-s3c2410/dma.h b/arch/arm/mach-s3c2410/dma.h new file mode 100644 index 00000000000..0ebfe0aab80 --- /dev/null +++ b/arch/arm/mach-s3c2410/dma.h @@ -0,0 +1,45 @@ +/* arch/arm/mach-s3c2410/dma.h + * + * Copyright (C) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Samsung S3C24XX DMA support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern struct sysdev_class dma_sysclass; +extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; + +#define DMA_CH_VALID (1<<31) + +struct s3c24xx_dma_addr { + unsigned long from; + unsigned long to; +}; + +/* struct s3c24xx_dma_map + * + * this holds the mapping information for the channel selected + * to be connected to the specified device +*/ + +struct s3c24xx_dma_map { + const char *name; + struct s3c24xx_dma_addr hw_addr; + + unsigned long channels[S3C2410_DMA_CHANNELS]; +}; + +struct s3c24xx_dma_selection { + struct s3c24xx_dma_map *map; + unsigned long map_size; + unsigned long dcon_mask; + + void (*select)(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map); +}; + +extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index cd39e868458..db6393c9986 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -18,21 +18,7 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Changelog - * 13-Sep-2004 BJD Implemented change of MISCCR - * 14-Sep-2004 BJD Added getpin call - * 14-Sep-2004 BJD Fixed bug in setpin() call - * 30-Sep-2004 BJD Fixed cfgpin() mask bug - * 01-Oct-2004 BJD Added getcfg() to get pin configuration - * 01-Oct-2004 BJD Fixed mask bug in pullup() call - * 01-Oct-2004 BJD Added getirq() to turn pin into irqno - * 04-Oct-2004 BJD Added irq filter controls for GPIO - * 05-Nov-2004 BJD EXPORT_SYMBOL() added for all code - * 13-Mar-2005 BJD Updates for __iomem - * 26-Oct-2005 BJD Added generic configuration types - * 15-Jan-2006 LCVR Added support for the S3C2400 - */ +*/ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index cd6139b3599..3e9f3462c61 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -181,17 +181,19 @@ s3c_irq_unmask(unsigned int irqno) } struct irqchip s3c_irq_level_chip = { - .ack = s3c_irq_maskack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake + .name = "s3c-level", + .ack = s3c_irq_maskack, + .mask = s3c_irq_mask, + .unmask = s3c_irq_unmask, + .set_wake = s3c_irq_wake }; static struct irqchip s3c_irq_chip = { - .ack = s3c_irq_ack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake + .name = "s3c", + .ack = s3c_irq_ack, + .mask = s3c_irq_mask, + .unmask = s3c_irq_unmask, + .set_wake = s3c_irq_wake }; static void @@ -343,19 +345,21 @@ s3c_irqext_type(unsigned int irq, unsigned int type) } static struct irqchip s3c_irqext_chip = { - .mask = s3c_irqext_mask, - .unmask = s3c_irqext_unmask, - .ack = s3c_irqext_ack, - .set_type = s3c_irqext_type, - .set_wake = s3c_irqext_wake + .name = "s3c-ext", + .mask = s3c_irqext_mask, + .unmask = s3c_irqext_unmask, + .ack = s3c_irqext_ack, + .set_type = s3c_irqext_type, + .set_wake = s3c_irqext_wake }; static struct irqchip s3c_irq_eint0t4 = { - .ack = s3c_irq_ack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake, - .set_type = s3c_irqext_type, + .name = "s3c-ext0", + .ack = s3c_irq_ack, + .mask = s3c_irq_mask, + .unmask = s3c_irq_unmask, + .set_wake = s3c_irq_wake, + .set_type = s3c_irqext_type, }; /* mask values for the parent registers for each of the interrupt types */ @@ -387,9 +391,10 @@ s3c_irq_uart0_ack(unsigned int irqno) } static struct irqchip s3c_irq_uart0 = { - .mask = s3c_irq_uart0_mask, - .unmask = s3c_irq_uart0_unmask, - .ack = s3c_irq_uart0_ack, + .name = "s3c-uart0", + .mask = s3c_irq_uart0_mask, + .unmask = s3c_irq_uart0_unmask, + .ack = s3c_irq_uart0_ack, }; /* UART1 */ @@ -413,9 +418,10 @@ s3c_irq_uart1_ack(unsigned int irqno) } static struct irqchip s3c_irq_uart1 = { - .mask = s3c_irq_uart1_mask, - .unmask = s3c_irq_uart1_unmask, - .ack = s3c_irq_uart1_ack, + .name = "s3c-uart1", + .mask = s3c_irq_uart1_mask, + .unmask = s3c_irq_uart1_unmask, + .ack = s3c_irq_uart1_ack, }; /* UART2 */ @@ -439,9 +445,10 @@ s3c_irq_uart2_ack(unsigned int irqno) } static struct irqchip s3c_irq_uart2 = { - .mask = s3c_irq_uart2_mask, - .unmask = s3c_irq_uart2_unmask, - .ack = s3c_irq_uart2_ack, + .name = "s3c-uart2", + .mask = s3c_irq_uart2_mask, + .unmask = s3c_irq_uart2_unmask, + .ack = s3c_irq_uart2_ack, }; /* ADC and Touchscreen */ @@ -465,9 +472,10 @@ s3c_irq_adc_ack(unsigned int irqno) } static struct irqchip s3c_irq_adc = { - .mask = s3c_irq_adc_mask, - .unmask = s3c_irq_adc_unmask, - .ack = s3c_irq_adc_ack, + .name = "s3c-adc", + .mask = s3c_irq_adc_mask, + .unmask = s3c_irq_adc_unmask, + .ack = s3c_irq_adc_ack, }; /* irq demux for adc */ @@ -569,23 +577,104 @@ s3c_irq_demux_uart2(unsigned int irq, } static void -s3c_irq_demux_extint(unsigned int irq, - struct irqdesc *desc, - struct pt_regs *regs) +s3c_irq_demux_extint8(unsigned int irq, + struct irqdesc *desc, + struct pt_regs *regs) { unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); eintpnd &= ~eintmsk; + eintpnd &= ~0xff; /* ignore lower irqs */ - if (eintpnd) { - irq = fls(eintpnd); - irq += (IRQ_EINT4 - (4 + 1)); + /* we may as well handle all the pending IRQs here */ + while (eintpnd) { + irq = __ffs(eintpnd); + eintpnd &= ~(1<<irq); + + irq += (IRQ_EINT4 - 4); desc_handle_irq(irq, irq_desc + irq, regs); } + +} + +static void +s3c_irq_demux_extint4t7(unsigned int irq, + struct irqdesc *desc, + struct pt_regs *regs) +{ + unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); + unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); + + eintpnd &= ~eintmsk; + eintpnd &= 0xff; /* only lower irqs */ + + /* we may as well handle all the pending IRQs here */ + + while (eintpnd) { + irq = __ffs(eintpnd); + eintpnd &= ~(1<<irq); + + irq += (IRQ_EINT4 - 4); + + desc_handle_irq(irq, irq_desc + irq, regs); + } +} + +#ifdef CONFIG_PM + +static struct sleep_save irq_save[] = { + SAVE_ITEM(S3C2410_INTMSK), + SAVE_ITEM(S3C2410_INTSUBMSK), +}; + +/* the extint values move between the s3c2410/s3c2440 and the s3c2412 + * so we use an array to hold them, and to calculate the address of + * the register at run-time +*/ + +static unsigned long save_extint[3]; +static unsigned long save_eintflt[4]; +static unsigned long save_eintmask; + +int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(save_extint); i++) + save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4)); + + for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) + save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4)); + + s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); + save_eintmask = __raw_readl(S3C24XX_EINTMASK); + + return 0; } +int s3c24xx_irq_resume(struct sys_device *dev) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(save_extint); i++) + __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4)); + + for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) + __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4)); + + s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); + __raw_writel(save_eintmask, S3C24XX_EINTMASK); + + return 0; +} + +#else +#define s3c24xx_irq_suspend NULL +#define s3c24xx_irq_resume NULL +#endif + /* s3c24xx_init_irq * * Initialise S3C2410 IRQ system @@ -674,8 +763,8 @@ void __init s3c24xx_init_irq(void) /* setup the cascade irq handlers */ - set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint); - set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint); + set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7); + set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8); set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0); set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1); diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c new file mode 100644 index 00000000000..ba5109af40b --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -0,0 +1,266 @@ +/*********************************************************************** + * + * linux/arch/arm/mach-s3c2410/mach-amlm5900.c + * + * Copyright (c) 2006 American Microsystems Limited + * David Anders <danders@amltd.com> + + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * @History: + * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by + * Ben Dooks <ben@simtec.co.uk> + * + ***********************************************************************/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/proc_fs.h> + + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/flash.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/arch/fb.h> + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-gpio.h> + +#include "devs.h" +#include "cpu.h" + +#ifdef CONFIG_MTD_PARTITIONS + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/map.h> +#include <linux/mtd/physmap.h> + +static struct resource amlm5900_nor_resource = { + .start = 0x00000000, + .end = 0x01000000 - 1, + .flags = IORESOURCE_MEM, +}; + + + +static struct mtd_partition amlm5900_mtd_partitions[] = { + { + .name = "System", + .size = 0x240000, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + .name = "Kernel", + .size = 0x100000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "Ramdisk", + .size = 0x300000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "JFFS2", + .size = 0x9A0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "Settings", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data amlm5900_flash_data = { + .width = 2, + .parts = amlm5900_mtd_partitions, + .nr_parts = ARRAY_SIZE(amlm5900_mtd_partitions), +}; + +static struct platform_device amlm5900_device_nor = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &amlm5900_flash_data, + }, + .num_resources = 1, + .resource = &amlm5900_nor_resource, +}; +#endif + +static struct map_desc amlm5900_iodesc[] __initdata = { + { + .virtual = (u32)S3C24XX_VA_SPI, + .pfn = __phys_to_pfn(S3C2410_PA_SPI), + .length = SZ_1M, + .type = MT_DEVICE + } +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg amlm5900_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + } +}; + + +static struct platform_device *amlm5900_devices[] __initdata = { +#ifdef CONFIG_FB_S3C2410 + &s3c_device_lcd, +#endif + &s3c_device_adc, + &s3c_device_wdt, + &s3c_device_i2c, + &s3c_device_usb, + &s3c_device_rtc, + &s3c_device_usbgadget, + &s3c_device_sdi, +#ifdef CONFIG_MTD_PARTITIONS + &amlm5900_device_nor, +#endif +}; + +static struct s3c24xx_board amlm5900_board __initdata = { + .devices = amlm5900_devices, + .devices_count = ARRAY_SIZE(amlm5900_devices) +}; + +void __init amlm5900_map_io(void) +{ + s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); + s3c24xx_init_clocks(0); + s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); + s3c24xx_set_board(&amlm5900_board); +} + +#ifdef CONFIG_FB_S3C2410 +static struct s3c2410fb_mach_info __initdata amlm5900_lcd_info = { + .width = 160, + .height = 160, + +/* commented out until stn patch is submitted +* .type = S3C2410_LCDCON1_STN4, +*/ + .gpccon = 0xaaaaaaaa, + .gpccon_mask = 0xffffffff, + .gpcup = 0x0000ffff, + .gpcup_mask = 0xffffffff, + + .gpdcon = 0xaaaaaaaa, + .gpdcon_mask = 0xffffffff, + .gpdup = 0x0000ffff, + .gpdup_mask = 0xffffffff, + + .xres = { + .min = 160, + .max = 160, + .defval = 160, + }, + + .yres = { + .min = 160, + .max = 160, + .defval = 160, + }, + + .bpp = { + .min = 4, + .max = 4, + .defval = 4, + }, + + .regs = { + .lcdcon1 = 0x00008225, + .lcdcon2 = 0x0027c000, + .lcdcon3 = 0x00182708, + .lcdcon4 = 0x00000002, + .lcdcon5 = 0x00000001, + } +}; +#endif + +static irqreturn_t +amlm5900_wake_interrupt(int irq, void *ignored, struct pt_regs *regs) +{ + return IRQ_HANDLED; +} + +static void amlm5900_init_pm(void) +{ + int ret = 0; + + ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt, + IRQF_TRIGGER_RISING | IRQF_SHARED, + "amlm5900_wakeup", &amlm5900_wake_interrupt); + if (ret != 0) { + printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret); + } else { + enable_irq_wake(IRQ_EINT9); + /* configure the suspend/resume status pin */ + s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); + s3c2410_gpio_pullup(S3C2410_GPF2, 0); + } +} +static void __init amlm5900_init(void) +{ + amlm5900_init_pm(); +#ifdef CONFIG_FB_S3C2410 + s3c24xx_fb_set_platdata(&amlm5900_lcd_info); +#endif +} + +MACHINE_START(AML_M5900, "AML_M5900") + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = amlm5900_map_io, + .init_irq = s3c24xx_init_irq, + .init_machine = amlm5900_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c index 60641d452db..e94cdcd9659 100644 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -4,15 +4,9 @@ * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * - * - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 02-May-2005 BJD Copied from mach-bast.c - * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index d661c6b7ff5..e2205ff1b0e 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -11,15 +11,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Modifications: - * 01-Nov-2004 BJD Initial version - * 12-Nov-2004 BJD Updated for release - * 04-Jan-2005 BJD Fixes for pre-release - * 22-Feb-2005 BJD Updated for 2.6.11-rc5 relesa - * 10-Mar-2005 LCVR Replaced S3C2410_VA by S3C24XX_VA - * 14-Mar-2005 BJD void __iomem fixes - * 20-Sep-2005 BJD Added static to non-exported items - * 26-Oct-2005 BJD Added framebuffer data */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/mach-vstms.c b/arch/arm/mach-s3c2410/mach-vstms.c new file mode 100644 index 00000000000..ea554e7c006 --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-vstms.c @@ -0,0 +1,168 @@ +/* linux/arch/arm/mach-s3c2410/mach-vstms.c + * + * (C) 2006 Thomas Gleixner <tglx@linutronix.de> + * + * Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/hardware.h> +#include <asm/hardware/iomd.h> +#include <asm/setup.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-lcd.h> + +#include <asm/arch/idle.h> +#include <asm/arch/fb.h> + +#include <asm/arch/nand.h> + +#include "s3c2410.h" +#include "s3c2412.h" +#include "clock.h" +#include "devs.h" +#include "cpu.h" + + +static struct map_desc vstms_iodesc[] __initdata = { +}; + +static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + } +}; + +static struct mtd_partition vstms_nand_part[] = { + [0] = { + .name = "Boot Agent", + .size = 0x7C000, + .offset = 0, + }, + [1] = { + .name = "UBoot Config", + .offset = 0x7C000, + .size = 0x4000, + }, + [2] = { + .name = "Kernel", + .offset = 0x80000, + .size = 0x200000, + }, + [3] = { + .name = "RFS", + .offset = 0x280000, + .size = 0x3d80000, + }, +}; + +static struct s3c2410_nand_set vstms_nand_sets[] = { + [0] = { + .name = "NAND", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(vstms_nand_part), + .partitions = vstms_nand_part, + }, +}; + +/* choose a set of timings which should suit most 512Mbit + * chips and beyond. +*/ + +static struct s3c2410_platform_nand vstms_nand_info = { + .tacls = 20, + .twrph0 = 60, + .twrph1 = 20, + .nr_sets = ARRAY_SIZE(vstms_nand_sets), + .sets = vstms_nand_sets, +}; + +static struct platform_device *vstms_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_wdt, + &s3c_device_i2c, + &s3c_device_iis, + &s3c_device_rtc, + &s3c_device_nand, +}; + +static struct s3c24xx_board vstms_board __initdata = { + .devices = vstms_devices, + .devices_count = ARRAY_SIZE(vstms_devices) +}; + +static void __init vstms_fixup(struct machine_desc *desc, + struct tag *tags, char **cmdline, + struct meminfo *mi) +{ + if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { + mi->nr_banks=1; + mi->bank[0].start = 0x30000000; + mi->bank[0].size = SZ_64M; + mi->bank[0].node = 0; + } +} + +static void __init vstms_map_io(void) +{ + s3c_device_nand.dev.platform_data = &vstms_nand_info; + + s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); + s3c24xx_set_board(&vstms_board); +} + +MACHINE_START(VSTMS, "VSTMS") + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + + .fixup = vstms_fixup, + .init_irq = s3c24xx_init_irq, + .map_io = vstms_map_io, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c index 7b244566a43..42cd05e298f 100644 --- a/arch/arm/mach-s3c2410/pm-simtec.c +++ b/arch/arm/mach-s3c2410/pm-simtec.c @@ -49,7 +49,8 @@ static __init int pm_simtec_init(void) /* check which machine we are running on */ if (!machine_is_bast() && !machine_is_vr1000() && - !machine_is_anubis() && !machine_is_osiris()) + !machine_is_anubis() && !machine_is_osiris() && + !machine_is_aml_m5900()) return 0; printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index a589fe76d91..b49a0b3b72b 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -1,9 +1,9 @@ /* linux/arch/arm/mach-s3c2410/pm.c * - * Copyright (c) 2004 Simtec Electronics + * Copyright (c) 2004,2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C2410 Power Manager (Suspend-To-RAM) support + * S3C24XX Power Manager (Suspend-To-RAM) support * * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information * @@ -24,9 +24,6 @@ * Parts based on arch/arm/mach-pxa/pm.c * * Thanks to Dimitry Andric for debugging - * - * Modifications: - * 10-Mar-2005 LCVR Changed S3C2410_VA_UART to S3C24XX_VA_UART */ #include <linux/init.h> @@ -38,6 +35,7 @@ #include <linux/ioport.h> #include <linux/delay.h> +#include <asm/cacheflush.h> #include <asm/hardware.h> #include <asm/io.h> @@ -55,14 +53,6 @@ unsigned long s3c_pm_flags; -/* cache functions from arch/arm/mm/proc-arm920.S */ - -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH -extern void arm920_flush_kern_cache_all(void); -#else -static void arm920_flush_kern_cache_all(void) { } -#endif - #define PFX "s3c24xx-pm: " static struct sleep_save core_save[] = { @@ -92,19 +82,6 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_REFRESH), }; -/* this lot should be really saved by the IRQ code */ -static struct sleep_save irq_save[] = { - SAVE_ITEM(S3C2410_EXTINT0), - SAVE_ITEM(S3C2410_EXTINT1), - SAVE_ITEM(S3C2410_EXTINT2), - SAVE_ITEM(S3C2410_EINFLT0), - SAVE_ITEM(S3C2410_EINFLT1), - SAVE_ITEM(S3C2410_EINFLT2), - SAVE_ITEM(S3C2410_EINFLT3), - SAVE_ITEM(S3C2410_EINTMASK), - SAVE_ITEM(S3C2410_INTMSK) -}; - static struct sleep_save gpio_save[] = { SAVE_ITEM(S3C2410_GPACON), SAVE_ITEM(S3C2410_GPADAT), @@ -165,7 +142,7 @@ static struct sleep_save uart_save[] = { extern void printascii(const char *); -static void pm_dbg(const char *fmt, ...) +void pm_dbg(const char *fmt, ...) { va_list va; char buff[256]; @@ -509,6 +486,9 @@ static void s3c2410_pm_configure_extint(void) } } +void (*pm_cpu_prep)(void); +void (*pm_cpu_sleep)(void); + #define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) /* s3c2410_pm_enter @@ -519,7 +499,6 @@ static void s3c2410_pm_configure_extint(void) static int s3c2410_pm_enter(suspend_state_t state) { unsigned long regs_save[16]; - unsigned long tmp; /* ensure the debug is initialised (if enabled) */ @@ -527,6 +506,11 @@ static int s3c2410_pm_enter(suspend_state_t state) DBG("s3c2410_pm_enter(%d)\n", state); + if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) { + printk(KERN_ERR PFX "error: no cpu sleep functions set\n"); + return -EINVAL; + } + if (state != PM_SUSPEND_MEM) { printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n"); return -EINVAL; @@ -554,17 +538,9 @@ static int s3c2410_pm_enter(suspend_state_t state) DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys); - /* ensure at least GESTATUS3 has the resume address */ - - __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); - - DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); - DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); - /* save all necessary core registers not covered by the drivers */ s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save)); - s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save)); s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); @@ -581,10 +557,16 @@ static int s3c2410_pm_enter(suspend_state_t state) /* ack any outstanding external interrupts before we go to sleep */ __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); + __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); + __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); + + /* call cpu specific preperation */ + + pm_cpu_prep(); /* flush cache back to ram */ - arm920_flush_kern_cache_all(); + flush_cache_all(); s3c2410_pm_check_store(); @@ -592,23 +574,23 @@ static int s3c2410_pm_enter(suspend_state_t state) __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ - s3c2410_cpu_suspend(regs_save); + /* s3c2410_cpu_save will also act as our return point from when + * we resume as it saves its own register state, so use the return + * code to differentiate return from save and return from sleep */ + + if (s3c2410_cpu_save(regs_save) == 0) { + flush_cache_all(); + pm_cpu_sleep(); + } /* restore the cpu state */ cpu_init(); - /* unset the return-from-sleep flag, to ensure reset */ - - tmp = __raw_readl(S3C2410_GSTATUS2); - tmp &= S3C2410_GSTATUS2_OFFRESET; - __raw_writel(tmp, S3C2410_GSTATUS2); - /* restore the system state */ s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save)); - s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); s3c2410_pm_debug_init(); diff --git a/arch/arm/mach-s3c2410/pm.h b/arch/arm/mach-s3c2410/pm.h index 7a5e714c738..ffe197a119f 100644 --- a/arch/arm/mach-s3c2410/pm.h +++ b/arch/arm/mach-s3c2410/pm.h @@ -34,13 +34,19 @@ extern unsigned long s3c_irqwake_eintmask; extern unsigned long s3c_irqwake_intallow; extern unsigned long s3c_irqwake_eintallow; +/* per-cpu sleep functions */ + +extern void (*pm_cpu_prep)(void); +extern void (*pm_cpu_sleep)(void); + /* Flags for PM Control */ extern unsigned long s3c_pm_flags; /* from sleep.S */ -extern void s3c2410_cpu_suspend(unsigned long *saveblk); +extern int s3c2410_cpu_save(unsigned long *saveblk); +extern void s3c2410_cpu_suspend(void); extern void s3c2410_cpu_resume(void); extern unsigned long s3c2410_sleep_save_phys; @@ -57,3 +63,11 @@ struct sleep_save { extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count); extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count); + +#ifdef CONFIG_PM +extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); +extern int s3c24xx_irq_resume(struct sys_device *dev); +#else +#define s3c24xx_irq_suspend NULL +#define s3c24xx_irq_resume NULL +#endif diff --git a/arch/arm/mach-s3c2410/s3c2410-dma.c b/arch/arm/mach-s3c2410/s3c2410-dma.c new file mode 100644 index 00000000000..51e5098b32e --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2410-dma.c @@ -0,0 +1,158 @@ +/* linux/arch/arm/mach-s3c2410/s3c2410-dma.c + * + * (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 DMA selection + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysdev.h> + +#include <asm/dma.h> +#include <asm/arch/dma.h> +#include "dma.h" + +#include "cpu.h" + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-ac97.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-sdi.h> +#include <asm/arch/regs-iis.h> +#include <asm/arch/regs-spi.h> + +static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, + }, + [DMACH_SDI] = { + .name = "sdi", + .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_USB_EP1] = { + .name = "usb-ep1", + .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, + }, + [DMACH_USB_EP2] = { + .name = "usb-ep2", + .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, + }, + [DMACH_USB_EP3] = { + .name = "usb-ep3", + .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, + }, + [DMACH_USB_EP4] = { + .name = "usb-ep4", + .channels[3] =S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, + }, +}; + +static void s3c2410_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) +{ + chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; +} + +static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = { + .select = s3c2410_dma_select, + .dcon_mask = 7 << 24, + .map = s3c2410_dma_mappings, + .map_size = ARRAY_SIZE(s3c2410_dma_mappings), +}; + +static int s3c2410_dma_add(struct sys_device *sysdev) +{ + return s3c24xx_dma_init_map(&s3c2410_dma_sel); +} + +static struct sysdev_driver s3c2410_dma_driver = { + .add = s3c2410_dma_add, +}; + +static int __init s3c2410_dma_init(void) +{ + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver); +} + +arch_initcall(s3c2410_dma_init); + +/* S3C2442 DMA contains the same selection table as the S3C2410 */ + +static struct sysdev_driver s3c2442_dma_driver = { + .add = s3c2410_dma_add, +}; + +static int __init s3c2442_dma_init(void) +{ + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver); +} + +arch_initcall(s3c2442_dma_init); + + diff --git a/arch/arm/mach-s3c2410/s3c2410-irq.c b/arch/arm/mach-s3c2410/s3c2410-irq.c new file mode 100644 index 00000000000..c796c9c76e7 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2410-irq.c @@ -0,0 +1,48 @@ +/* linux/arch/arm/mach-s3c2410/s3c2410-irq.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/ptrace.h> +#include <linux/sysdev.h> + +#include "cpu.h" +#include "pm.h" + +static int s3c2410_irq_add(struct sys_device *sysdev) +{ + return 0; +} + +static struct sysdev_driver s3c2410_irq_driver = { + .add = s3c2410_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, +}; + +static int s3c2410_irq_init(void) +{ + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver); +} + +arch_initcall(s3c2410_irq_init); diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c new file mode 100644 index 00000000000..e51d7666951 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2410-pm.c @@ -0,0 +1,120 @@ +/* linux/arch/arm/mach-s3c2410/s3c2410-pm.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/errno.h> +#include <linux/time.h> +#include <linux/sysdev.h> + +#include <asm/hardware.h> +#include <asm/io.h> + +#include <asm/mach-types.h> + +#include <asm/arch/regs-gpio.h> + +#include "cpu.h" +#include "pm.h" + +#ifdef CONFIG_S3C2410_PM_DEBUG +extern void pm_dbg(const char *fmt, ...); +#define DBG(fmt...) pm_dbg(fmt) +#else +#define DBG(fmt...) printk(KERN_DEBUG fmt) +#endif + +static void s3c2410_pm_prepare(void) +{ + /* ensure at least GSTATUS3 has the resume address */ + + __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); + + DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); + DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); + + if ( machine_is_aml_m5900() ) + s3c2410_gpio_setpin(S3C2410_GPF2, 1); + +} + +int s3c2410_pm_resume(struct sys_device *dev) +{ + unsigned long tmp; + + /* unset the return-from-sleep flag, to ensure reset */ + + tmp = __raw_readl(S3C2410_GSTATUS2); + tmp &= S3C2410_GSTATUS2_OFFRESET; + __raw_writel(tmp, S3C2410_GSTATUS2); + + if ( machine_is_aml_m5900() ) + s3c2410_gpio_setpin(S3C2410_GPF2, 0); + + return 0; +} + +static int s3c2410_pm_add(struct sys_device *dev) +{ + pm_cpu_prep = s3c2410_pm_prepare; + pm_cpu_sleep = s3c2410_cpu_suspend; + + return 0; +} + +static struct sysdev_driver s3c2410_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; + +/* register ourselves */ + +static int __init s3c2410_pm_drvinit(void) +{ + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver); +} + +arch_initcall(s3c2410_pm_drvinit); + +static struct sysdev_driver s3c2440_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; + +static int __init s3c2440_pm_drvinit(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver); +} + +arch_initcall(s3c2440_pm_drvinit); + +static struct sysdev_driver s3c2442_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; + +static int __init s3c2442_pm_drvinit(void) +{ + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver); +} + +arch_initcall(s3c2442_pm_drvinit); diff --git a/arch/arm/mach-s3c2410/s3c2410-sleep.S b/arch/arm/mach-s3c2410/s3c2410-sleep.S new file mode 100644 index 00000000000..9179a102458 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2410-sleep.S @@ -0,0 +1,68 @@ +/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 Power Manager (Suspend-To-RAM) support + * + * Based on PXA/SA1100 sleep code by: + * Nicolas Pitre, (c) 2002 Monta Vista Software Inc + * Cliff Brake, (c) 2001 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/hardware.h> +#include <asm/arch/map.h> + +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-clock.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-serial.h> + + /* s3c2410_cpu_suspend + * + * put the cpu into sleep mode + */ + +ENTRY(s3c2410_cpu_suspend) + @@ prepare cpu to sleep + + ldr r4, =S3C2410_REFRESH + ldr r5, =S3C24XX_MISCCR + ldr r6, =S3C2410_CLKCON + ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) + ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) + ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB) + + orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command + orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals + orr r9, r9, #S3C2410_CLKCON_POWER @ power down command + + teq pc, #0 @ first as a trial-run to load cache + bl s3c2410_do_sleep + teq r0, r0 @ now do it for real + b s3c2410_do_sleep @ + + @@ align next bit of code to cache line + .align 8 +s3c2410_do_sleep: + streq r7, [ r4 ] @ SDRAM sleep command + streq r8, [ r5 ] @ SDRAM power-down config + streq r9, [ r6 ] @ CPU sleep +1: beq 1b + mov pc, r14 diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index a110cff9cf6..183e4033ce6 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -8,17 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 16-May-2003 BJD Created initial version - * 16-Aug-2003 BJD Fixed header files and copyright, added URL - * 05-Sep-2003 BJD Moved to kernel v2.6 - * 18-Jan-2004 BJD Added serial port configuration - * 21-Aug-2004 BJD Added new struct s3c2410_board handler - * 28-Sep-2004 BJD Updates for new serial port bits - * 04-Nov-2004 BJD Updated UART configuration process - * 10-Jan-2005 BJD Removed s3c2410_clock_tick_rate - * 13-Aug-2005 DA Removed UART from initial I/O mappings */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2410/s3c2412-dma.c new file mode 100644 index 00000000000..171f3706d36 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2412-dma.c @@ -0,0 +1,160 @@ +/* linux/arch/arm/mach-s3c2410/s3c2412-dma.c + * + * (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2412 DMA selection + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysdev.h> + +#include <asm/dma.h> +#include <asm/arch/dma.h> +#include <asm/io.h> + +#include "dma.h" +#include "cpu.h" + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-ac97.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-sdi.h> +#include <asm/arch/regs-iis.h> +#include <asm/arch/regs-spi.h> + +#define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } + +static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels = MAP(S3C2412_DMAREQSEL_XDREQ0), + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels = MAP(S3C2412_DMAREQSEL_XDREQ1), + }, + [DMACH_SDI] = { + .name = "sdi", + .channels = MAP(S3C2412_DMAREQSEL_SDI), + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels = MAP(S3C2412_DMAREQSEL_SPI0TX), + .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels = MAP(S3C2412_DMAREQSEL_SPI1TX), + .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels = MAP(S3C2412_DMAREQSEL_UART0_0), + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels = MAP(S3C2412_DMAREQSEL_UART1_0), + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels = MAP(S3C2412_DMAREQSEL_UART2_0), + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_UART0_SRC2] = { + .name = "uart0", + .channels = MAP(S3C2412_DMAREQSEL_UART0_1), + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1_SRC2] = { + .name = "uart1", + .channels = MAP(S3C2412_DMAREQSEL_UART1_1), + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2_SRC2] = { + .name = "uart2", + .channels = MAP(S3C2412_DMAREQSEL_UART2_1), + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels = MAP(S3C2412_DMAREQSEL_TIMER), + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels = MAP(S3C2412_DMAREQSEL_I2SRX), + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels = MAP(S3C2412_DMAREQSEL_I2STX), + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_USB_EP1] = { + .name = "usb-ep1", + .channels = MAP(S3C2412_DMAREQSEL_USBEP1), + }, + [DMACH_USB_EP2] = { + .name = "usb-ep2", + .channels = MAP(S3C2412_DMAREQSEL_USBEP2), + }, + [DMACH_USB_EP3] = { + .name = "usb-ep3", + .channels = MAP(S3C2412_DMAREQSEL_USBEP3), + }, + [DMACH_USB_EP4] = { + .name = "usb-ep4", + .channels = MAP(S3C2412_DMAREQSEL_USBEP4), + }, +}; + +static void s3c2412_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) +{ + writel(chan->regs + S3C2412_DMA_DMAREQSEL, + map->channels[0] | S3C2412_DMAREQSEL_HW); +} + +static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { + .select = s3c2412_dma_select, + .dcon_mask = 0, + .map = s3c2412_dma_mappings, + .map_size = ARRAY_SIZE(s3c2412_dma_mappings), +}; + +static int s3c2412_dma_add(struct sys_device *sysdev) +{ + return s3c24xx_dma_init_map(&s3c2412_dma_sel); +} + +static struct sysdev_driver s3c2412_dma_driver = { + .add = s3c2412_dma_add, +}; + +static int __init s3c2412_dma_init(void) +{ + return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_dma_driver); +} + +arch_initcall(s3c2412_dma_init); diff --git a/arch/arm/mach-s3c2410/s3c2412-irq.c b/arch/arm/mach-s3c2410/s3c2412-irq.c index c80ec93dfea..7f741547658 100644 --- a/arch/arm/mach-s3c2410/s3c2412-irq.c +++ b/arch/arm/mach-s3c2410/s3c2412-irq.c @@ -37,6 +37,7 @@ #include "cpu.h" #include "irq.h" +#include "pm.h" /* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by * having them turn up in both the INT* and the EINT* registers. Whilst @@ -120,6 +121,8 @@ static int s3c2412_irq_add(struct sys_device *sysdev) static struct sysdev_driver s3c2412_irq_driver = { .add = s3c2412_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, }; static int s3c2412_irq_init(void) diff --git a/arch/arm/mach-s3c2410/s3c2412-pm.c b/arch/arm/mach-s3c2410/s3c2412-pm.c new file mode 100644 index 00000000000..19b63322d25 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2412-pm.c @@ -0,0 +1,128 @@ +/* linux/arch/arm/mach-s3c2410/s3c2412-pm.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://armlinux.simtec.co.uk/. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/sysdev.h> +#include <linux/platform_device.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> + +#include <asm/arch/regs-power.h> +#include <asm/arch/regs-gpioj.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-dsc.h> + +#include "cpu.h" +#include "pm.h" + +#include "s3c2412.h" + +static void s3c2412_cpu_suspend(void) +{ + unsigned long tmp; + + /* set our standby method to sleep */ + + tmp = __raw_readl(S3C2412_PWRCFG); + tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP; + __raw_writel(tmp, S3C2412_PWRCFG); + + /* issue the standby signal into the pm unit. Note, we + * issue a write-buffer drain just in case */ + + tmp = 0; + + asm("b 1f\n\t" + ".align 5\n\t" + "1:\n\t" + "mcr p15, 0, %0, c7, c10, 4\n\t" + "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp)); + + /* we should never get past here */ + + panic("sleep resumed to originator?"); +} + +static void s3c2412_pm_prepare(void) +{ +} + +static int s3c2412_pm_add(struct sys_device *sysdev) +{ + pm_cpu_prep = s3c2412_pm_prepare; + pm_cpu_sleep = s3c2412_cpu_suspend; + + return 0; +} + +static struct sleep_save s3c2412_sleep[] = { + SAVE_ITEM(S3C2412_DSC0), + SAVE_ITEM(S3C2412_DSC1), + SAVE_ITEM(S3C2413_GPJDAT), + SAVE_ITEM(S3C2413_GPJCON), + SAVE_ITEM(S3C2413_GPJUP), + + /* save the PWRCFG to get back to original sleep method */ + + SAVE_ITEM(S3C2412_PWRCFG), + + /* save the sleep configuration anyway, just in case these + * get damaged during wakeup */ + + SAVE_ITEM(S3C2412_GPBSLPCON), + SAVE_ITEM(S3C2412_GPCSLPCON), + SAVE_ITEM(S3C2412_GPDSLPCON), + SAVE_ITEM(S3C2412_GPESLPCON), + SAVE_ITEM(S3C2412_GPFSLPCON), + SAVE_ITEM(S3C2412_GPGSLPCON), + SAVE_ITEM(S3C2412_GPHSLPCON), + SAVE_ITEM(S3C2413_GPJSLPCON), +}; + +static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state) +{ + s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); + return 0; +} + +static int s3c2412_pm_resume(struct sys_device *dev) +{ + unsigned long tmp; + + tmp = __raw_readl(S3C2412_PWRCFG); + tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK; + tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE; + __raw_writel(tmp, S3C2412_PWRCFG); + + s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); + return 0; +} + +static struct sysdev_driver s3c2412_pm_driver = { + .add = s3c2412_pm_add, + .suspend = s3c2412_pm_suspend, + .resume = s3c2412_pm_resume, +}; + +static __init int s3c2412_pm_init(void) +{ + return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver); +} + +arch_initcall(s3c2412_pm_init); diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2410/s3c2412.c index 2d163f7600b..e76431c4146 100644 --- a/arch/arm/mach-s3c2410/s3c2412.c +++ b/arch/arm/mach-s3c2410/s3c2412.c @@ -8,17 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 16-May-2003 BJD Created initial version - * 16-Aug-2003 BJD Fixed header files and copyright, added URL - * 05-Sep-2003 BJD Moved to kernel v2.6 - * 18-Jan-2004 BJD Added serial port configuration - * 21-Aug-2004 BJD Added new struct s3c2410_board handler - * 28-Sep-2004 BJD Updates for new serial port bits - * 04-Nov-2004 BJD Updated UART configuration process - * 10-Jan-2005 BJD Removed s3c2410_clock_tick_rate - * 13-Aug-2005 DA Removed UART from initial I/O mappings */ #include <linux/kernel.h> @@ -56,6 +45,13 @@ #ifndef CONFIG_CPU_S3C2412_ONLY void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; + +static inline void s3c2412_init_gpio2(void) +{ + s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10; +} +#else +#define s3c2412_init_gpio2() do { } while(0) #endif /* Initial IO mappings */ @@ -76,6 +72,7 @@ void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no) /* rename devices that are s3c2412/s3c2413 specific */ s3c_device_sdi.name = "s3c2412-sdi"; + s3c_device_lcd.name = "s3c2412-lcd"; s3c_device_nand.name = "s3c2412-nand"; } @@ -110,7 +107,7 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size) { /* move base of IO */ - s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10; + s3c2412_init_gpio2(); /* set our idle function */ @@ -161,48 +158,8 @@ void __init s3c2412_init_clocks(int xtal) * as a driver which may support both 2410 and 2440 may try and use it. */ -#ifdef CONFIG_PM -static struct sleep_save s3c2412_sleep[] = { - SAVE_ITEM(S3C2412_DSC0), - SAVE_ITEM(S3C2412_DSC1), - SAVE_ITEM(S3C2413_GPJDAT), - SAVE_ITEM(S3C2413_GPJCON), - SAVE_ITEM(S3C2413_GPJUP), - - /* save the sleep configuration anyway, just in case these - * get damaged during wakeup */ - - SAVE_ITEM(S3C2412_GPBSLPCON), - SAVE_ITEM(S3C2412_GPCSLPCON), - SAVE_ITEM(S3C2412_GPDSLPCON), - SAVE_ITEM(S3C2412_GPESLPCON), - SAVE_ITEM(S3C2412_GPFSLPCON), - SAVE_ITEM(S3C2412_GPGSLPCON), - SAVE_ITEM(S3C2412_GPHSLPCON), - SAVE_ITEM(S3C2413_GPJSLPCON), -}; - -static int s3c2412_suspend(struct sys_device *dev, pm_message_t state) -{ - s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); - return 0; -} - -static int s3c2412_resume(struct sys_device *dev) -{ - s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); - return 0; -} - -#else -#define s3c2412_suspend NULL -#define s3c2412_resume NULL -#endif - struct sysdev_class s3c2412_sysclass = { set_kset_name("s3c2412-core"), - .suspend = s3c2412_suspend, - .resume = s3c2412_resume }; static int __init s3c2412_core_init(void) diff --git a/arch/arm/mach-s3c2410/s3c2440-dma.c b/arch/arm/mach-s3c2410/s3c2440-dma.c new file mode 100644 index 00000000000..11e109c84a1 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2440-dma.c @@ -0,0 +1,164 @@ +/* linux/arch/arm/mach-s3c2410/s3c2440-dma.c + * + * (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2440 DMA selection + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysdev.h> + +#include <asm/dma.h> +#include <asm/arch/dma.h> +#include "dma.h" + +#include "cpu.h" + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-ac97.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-sdi.h> +#include <asm/arch/regs-iis.h> +#include <asm/arch/regs-spi.h> + +static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, + }, + [DMACH_SDI] = { + .name = "sdi", + .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, + .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_PCM_IN] = { + .name = "pcm-in", + .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID, + .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID, + .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, + }, + [DMACH_PCM_OUT] = { + .name = "pcm-out", + .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID, + .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID, + .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, + }, + [DMACH_MIC_IN] = { + .name = "mic-in", + .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID, + .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID, + .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA, + }, + [DMACH_USB_EP1] = { + .name = "usb-ep1", + .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, + }, + [DMACH_USB_EP2] = { + .name = "usb-ep2", + .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, + }, + [DMACH_USB_EP3] = { + .name = "usb-ep3", + .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, + }, + [DMACH_USB_EP4] = { + .name = "usb-ep4", + .channels[3] = S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, + }, +}; + +static void s3c2440_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) +{ + chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; +} + +static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = { + .select = s3c2440_dma_select, + .dcon_mask = 7 << 24, + .map = s3c2440_dma_mappings, + .map_size = ARRAY_SIZE(s3c2440_dma_mappings), +}; + +static int s3c2440_dma_add(struct sys_device *sysdev) +{ + return s3c24xx_dma_init_map(&s3c2440_dma_sel); +} + +static struct sysdev_driver s3c2440_dma_driver = { + .add = s3c2440_dma_add, +}; + +static int __init s3c2440_dma_init(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_dma_driver); +} + +arch_initcall(s3c2440_dma_init); + diff --git a/arch/arm/mach-s3c2410/s3c2440-dsc.c b/arch/arm/mach-s3c2410/s3c2440-dsc.c index 16fa2a3b38f..c92ea66ba45 100644 --- a/arch/arm/mach-s3c2410/s3c2440-dsc.c +++ b/arch/arm/mach-s3c2410/s3c2440-dsc.c @@ -8,11 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 29-Aug-2004 BJD Start of drive-strength control - * 09-Nov-2004 BJD Added symbol export - * 11-Jan-2005 BJD Include fix */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c index 1667ba1fa43..fc08febe2e5 100644 --- a/arch/arm/mach-s3c2410/s3c2440-irq.c +++ b/arch/arm/mach-s3c2410/s3c2440-irq.c @@ -119,7 +119,7 @@ static int s3c2440_irq_add(struct sys_device *sysdev) } static struct sysdev_driver s3c2440_irq_driver = { - .add = s3c2440_irq_add, + .add = s3c2440_irq_add, }; static int s3c2440_irq_init(void) diff --git a/arch/arm/mach-s3c2410/s3c244x-irq.c b/arch/arm/mach-s3c2410/s3c244x-irq.c index 44c5affa9b8..0d13546c350 100644 --- a/arch/arm/mach-s3c2410/s3c244x-irq.c +++ b/arch/arm/mach-s3c2410/s3c244x-irq.c @@ -120,7 +120,9 @@ static int s3c244x_irq_add(struct sys_device *sysdev) } static struct sysdev_driver s3c2440_irq_driver = { - .add = s3c244x_irq_add, + .add = s3c244x_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, }; static int s3c2440_irq_init(void) @@ -131,9 +133,12 @@ static int s3c2440_irq_init(void) arch_initcall(s3c2440_irq_init); static struct sysdev_driver s3c2442_irq_driver = { - .add = s3c244x_irq_add, + .add = s3c244x_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, }; + static int s3c2442_irq_init(void) { return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver); diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S index a7561a79fc8..2018c2e1dcc 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c2410/sleep.S @@ -41,15 +41,25 @@ .text - /* s3c2410_cpu_suspend + /* s3c2410_cpu_save * - * put the cpu into sleep mode + * save enough of the CPU state to allow us to re-start + * pm.c code. as we store items like the sp/lr, we will + * end up returning from this function when the cpu resumes + * so the return value is set to mark this. + * + * This arangement means we avoid having to flush the cache + * from this code. * * entry: - * r0 = sleep save block + * r0 = pointer to save block + * + * exit: + * r0 = 0 => we stored everything + * 1 => resumed from sleep */ -ENTRY(s3c2410_cpu_suspend) +ENTRY(s3c2410_cpu_save) stmfd sp!, { r4 - r12, lr } @@ store co-processor registers @@ -62,44 +72,14 @@ ENTRY(s3c2410_cpu_suspend) stmia r0, { r4 - r13 } - @@ flush the caches to ensure everything is back out to - @@ SDRAM before the core powers down - -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH - bl arm920_flush_kern_cache_all -#endif - - @@ prepare cpu to sleep - - ldr r4, =S3C2410_REFRESH - ldr r5, =S3C24XX_MISCCR - ldr r6, =S3C2410_CLKCON - ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) - ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) - ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB) - - orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command - orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals - orr r9, r9, #S3C2410_CLKCON_POWER @ power down command - - teq pc, #0 @ first as a trial-run to load cache - bl s3c2410_do_sleep - teq r0, r0 @ now do it for real - b s3c2410_do_sleep @ - - @@ align next bit of code to cache line - .align 8 -s3c2410_do_sleep: - streq r7, [ r4 ] @ SDRAM sleep command - streq r8, [ r5 ] @ SDRAM power-down config - streq r9, [ r6 ] @ CPU sleep -1: beq 1b - mov pc, r14 + mov r0, #0 + ldmfd sp, { r4 - r12, pc } @@ return to the caller, after having the MMU @@ turned on, this restores the last bits from the @@ stack resume_with_mmu: + mov r0, #1 ldmfd sp!, { r4 - r12, pc } .ltorg diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index 6b22d8f0a00..c635efa7cd3 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -10,12 +10,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 14-Sep-2004 BJD Created - * 18-Oct-2004 BJD Cleanups, and added code to report OC cleared - * 09-Aug-2005 BJD Renamed s3c2410_report_oc to s3c2410_usb_report_oc - * 09-Aug-2005 BJD Ports powered only if both are enabled */ #define DEBUG diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index a0dfa390e34..6496eb645ce 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -91,30 +91,29 @@ static struct mcp_plat_data collie_mcp_data = { /* * low-level UART features. */ -static struct locomo_dev *uart_dev = NULL; +struct platform_device collie_locomo_device; static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl) { - if (!uart_dev) return; - if (mctrl & TIOCM_RTS) - locomo_gpio_write(uart_dev, LOCOMO_GPIO_RTS, 0); + locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0); else - locomo_gpio_write(uart_dev, LOCOMO_GPIO_RTS, 1); + locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1); if (mctrl & TIOCM_DTR) - locomo_gpio_write(uart_dev, LOCOMO_GPIO_DTR, 0); + locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0); else - locomo_gpio_write(uart_dev, LOCOMO_GPIO_DTR, 1); + locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1); } static u_int collie_uart_get_mctrl(struct uart_port *port) { int ret = TIOCM_CD; unsigned int r; - if (!uart_dev) return ret; - r = locomo_gpio_read_output(uart_dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR); + r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR); + if (r == -ENODEV) + return ret; if (r & LOCOMO_GPIO_CTS) ret |= TIOCM_CTS; if (r & LOCOMO_GPIO_DSR) @@ -130,13 +129,11 @@ static struct sa1100_port_fns collie_port_fns __initdata = { static int collie_uart_probe(struct locomo_dev *dev) { - uart_dev = dev; return 0; } static int collie_uart_remove(struct locomo_dev *dev) { - uart_dev = NULL; return 0; } @@ -170,7 +167,7 @@ static struct resource locomo_resources[] = { }, }; -static struct platform_device locomo_device = { +struct platform_device collie_locomo_device = { .name = "locomo", .id = 0, .num_resources = ARRAY_SIZE(locomo_resources), @@ -178,7 +175,7 @@ static struct platform_device locomo_device = { }; static struct platform_device *devices[] __initdata = { - &locomo_device, + &collie_locomo_device, &colliescoop_device, }; diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 41b370090b6..13bbd08ff84 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -117,7 +117,6 @@ static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int wh } else { switch (size) { case 1: - addr &= ~3; v = __raw_readb(addr); break; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index b4f220dd5eb..c0bfb8212b7 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -15,6 +15,7 @@ config CPU_ARM610 select CPU_32v3 select CPU_CACHE_V3 select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V3 if MMU select CPU_TLB_V3 if MMU help @@ -24,6 +25,20 @@ config CPU_ARM610 Say Y if you want support for the ARM610 processor. Otherwise, say N. +# ARM7TDMI +config CPU_ARM7TDMI + bool "Support ARM7TDMI processor" + depends on !MMU + select CPU_32v4T + select CPU_ABRT_LV4T + select CPU_CACHE_V4 + help + A 32-bit RISC microprocessor based on the ARM7 processor core + which has no memory control unit and cache. + + Say Y if you want support for the ARM7TDMI processor. + Otherwise, say N. + # ARM710 config CPU_ARM710 bool "Support ARM710 processor" if !ARCH_CLPS7500 && ARCH_RPC @@ -31,6 +46,7 @@ config CPU_ARM710 select CPU_32v3 select CPU_CACHE_V3 select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V3 if MMU select CPU_TLB_V3 if MMU help @@ -50,6 +66,7 @@ config CPU_ARM720T select CPU_ABRT_LV4T select CPU_CACHE_V4 select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WT if MMU select CPU_TLB_V4WT if MMU help @@ -59,6 +76,36 @@ config CPU_ARM720T Say Y if you want support for the ARM720T processor. Otherwise, say N. +# ARM740T +config CPU_ARM740T + bool "Support ARM740T processor" if ARCH_INTEGRATOR + depends on !MMU + select CPU_32v4T + select CPU_ABRT_LV4T + select CPU_CACHE_V3 # although the core is v4t + select CPU_CP15_MPU + help + A 32-bit RISC processor with 8KB cache or 4KB variants, + write buffer and MPU(Protection Unit) built around + an ARM7TDMI core. + + Say Y if you want support for the ARM740T processor. + Otherwise, say N. + +# ARM9TDMI +config CPU_ARM9TDMI + bool "Support ARM9TDMI processor" + depends on !MMU + select CPU_32v4T + select CPU_ABRT_NOMMU + select CPU_CACHE_V4 + help + A 32-bit RISC microprocessor based on the ARM9 processor core + which has no memory control unit and cache. + + Say Y if you want support for the ARM9TDMI processor. + Otherwise, say N. + # ARM920T config CPU_ARM920T bool "Support ARM920T processor" @@ -68,6 +115,7 @@ config CPU_ARM920T select CPU_ABRT_EV4T select CPU_CACHE_V4WT select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU select CPU_TLB_V4WBI if MMU help @@ -89,6 +137,7 @@ config CPU_ARM922T select CPU_ABRT_EV4T select CPU_CACHE_V4WT select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU select CPU_TLB_V4WBI if MMU help @@ -108,6 +157,7 @@ config CPU_ARM925T select CPU_ABRT_EV4T select CPU_CACHE_V4WT select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU select CPU_TLB_V4WBI if MMU help @@ -126,6 +176,7 @@ config CPU_ARM926T select CPU_32v5 select CPU_ABRT_EV5TJ select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU select CPU_TLB_V4WBI if MMU help @@ -136,6 +187,39 @@ config CPU_ARM926T Say Y if you want support for the ARM926T processor. Otherwise, say N. +# ARM940T +config CPU_ARM940T + bool "Support ARM940T processor" if ARCH_INTEGRATOR + depends on !MMU + select CPU_32v4T + select CPU_ABRT_NOMMU + select CPU_CACHE_VIVT + select CPU_CP15_MPU + help + ARM940T is a member of the ARM9TDMI family of general- + purpose microprocessors with MPU and seperate 4KB + instruction and 4KB data cases, each with a 4-word line + length. + + Say Y if you want support for the ARM940T processor. + Otherwise, say N. + +# ARM946E-S +config CPU_ARM946E + bool "Support ARM946E-S processor" if ARCH_INTEGRATOR + depends on !MMU + select CPU_32v5 + select CPU_ABRT_NOMMU + select CPU_CACHE_VIVT + select CPU_CP15_MPU + help + ARM946E-S is a member of the ARM9E-S family of high- + performance, 32-bit system-on-chip processor solutions. + The TCM and ARMv5TE 32-bit instruction set is supported. + + Say Y if you want support for the ARM946E-S processor. + Otherwise, say N. + # ARM1020 - needs validating config CPU_ARM1020 bool "Support ARM1020T (rev 0) processor" @@ -144,6 +228,7 @@ config CPU_ARM1020 select CPU_ABRT_EV4T select CPU_CACHE_V4WT select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU select CPU_TLB_V4WBI if MMU help @@ -161,6 +246,7 @@ config CPU_ARM1020E select CPU_ABRT_EV4T select CPU_CACHE_V4WT select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU select CPU_TLB_V4WBI if MMU depends on n @@ -172,6 +258,7 @@ config CPU_ARM1022 select CPU_32v5 select CPU_ABRT_EV4T select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU # can probably do better select CPU_TLB_V4WBI if MMU help @@ -189,6 +276,7 @@ config CPU_ARM1026 select CPU_32v5 select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10 select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU # can probably do better select CPU_TLB_V4WBI if MMU help @@ -207,6 +295,7 @@ config CPU_SA110 select CPU_ABRT_EV4 select CPU_CACHE_V4WB select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU select CPU_TLB_V4WB if MMU help @@ -227,16 +316,18 @@ config CPU_SA1100 select CPU_ABRT_EV4 select CPU_CACHE_V4WB select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_TLB_V4WB if MMU # XScale config CPU_XSCALE bool - depends on ARCH_IOP3XX || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000 + depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000 default y select CPU_32v5 select CPU_ABRT_EV5T select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_TLB_V4WBI if MMU # XScale Core Version 3 @@ -247,6 +338,7 @@ config CPU_XSC3 select CPU_32v5 select CPU_ABRT_EV5T select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_TLB_V4WBI if MMU select IO_36 @@ -258,6 +350,7 @@ config CPU_V6 select CPU_ABRT_EV6 select CPU_CACHE_V6 select CPU_CACHE_VIPT + select CPU_CP15_MMU select CPU_COPY_V6 if MMU select CPU_TLB_V6 if MMU @@ -299,6 +392,9 @@ config CPU_32v6 bool # The abort model +config CPU_ABRT_NOMMU + bool + config CPU_ABRT_EV4 bool @@ -380,6 +476,23 @@ config CPU_TLB_V6 endif +config CPU_CP15 + bool + help + Processor has the CP15 register. + +config CPU_CP15_MMU + bool + select CPU_CP15 + help + Processor has the CP15 register, which has MMU related registers. + +config CPU_CP15_MPU + bool + select CPU_CP15 + help + Processor has the CP15 register, which has MPU related registers. + # # CPU supports 36-bit I/O # @@ -390,7 +503,7 @@ comment "Processor Features" config ARM_THUMB bool "Support Thumb user binaries" - depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 + depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 default y help Say Y if you want to include kernel support for running user space @@ -411,23 +524,48 @@ config CPU_BIG_ENDIAN port must properly enable any big-endian related features of your chipset/board/processor. +config CPU_HIGH_VECTOR + depends !MMU && CPU_CP15 && !CPU_ARM740T + bool "Select the High exception vector" + default n + help + Say Y here to select high exception vector(0xFFFF0000~). + The exception vector can be vary depending on the platform + design in nommu mode. If your platform needs to select + high exception vector, say Y. + Otherwise or if you are unsure, say N, and the low exception + vector (0x00000000~) will be used. + config CPU_ICACHE_DISABLE - bool "Disable I-Cache" - depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6 + bool "Disable I-Cache (I-bit)" + depends on CPU_CP15 && !(CPU_ARM610 || CPU_ARM710 || CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3) help Say Y here to disable the processor instruction cache. Unless you have a reason not to or are unsure, say N. config CPU_DCACHE_DISABLE - bool "Disable D-Cache" - depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6 + bool "Disable D-Cache (C-bit)" + depends on CPU_CP15 help Say Y here to disable the processor data cache. Unless you have a reason not to or are unsure, say N. +config CPU_DCACHE_SIZE + hex + depends on CPU_ARM740T || CPU_ARM946E + default 0x00001000 if CPU_ARM740T + default 0x00002000 # default size for ARM946E-S + help + Some cores are synthesizable to have various sized cache. For + ARM946E-S case, it can vary from 0KB to 1MB. + To support such cache operations, it is efficient to know the size + before compile time. + If your SoC is configured to have a different size, define the value + here with proper conditions. + config CPU_DCACHE_WRITETHROUGH bool "Force write through D-cache" - depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE + depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE default y if CPU_ARM925T help Say Y here to use the data cache in writethrough mode. Unless you @@ -435,7 +573,7 @@ config CPU_DCACHE_WRITETHROUGH config CPU_CACHE_ROUND_ROBIN bool "Round robin I and D cache replacement algorithm" - depends on (CPU_ARM926T || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE) + depends on (CPU_ARM926T || CPU_ARM946E || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE) help Say Y here to use the predictable round-robin cache replacement policy. Unless you specifically require this or are unsure, say N. diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 21a2770226e..d2f5672ecf6 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -6,7 +6,7 @@ obj-y := consistent.o extable.o fault.o init.o \ iomap.o obj-$(CONFIG_MMU) += fault-armv.o flush.o ioremap.o mmap.o \ - mm-armv.o + pgd.o mmu.o ifneq ($(CONFIG_MMU),y) obj-y += nommu.o @@ -17,6 +17,7 @@ obj-$(CONFIG_MODULES) += proc-syms.o obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o obj-$(CONFIG_DISCONTIGMEM) += discontig.o +obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o obj-$(CONFIG_CPU_ABRT_EV4) += abort-ev4.o obj-$(CONFIG_CPU_ABRT_EV4T) += abort-ev4t.o obj-$(CONFIG_CPU_ABRT_LV4T) += abort-lv4t.o @@ -33,7 +34,7 @@ obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o -obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o mmu.o +obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o context.o obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o @@ -46,11 +47,16 @@ obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o +obj-$(CONFIG_CPU_ARM7TDMI) += proc-arm7tdmi.o obj-$(CONFIG_CPU_ARM720T) += proc-arm720.o +obj-$(CONFIG_CPU_ARM740T) += proc-arm740.o +obj-$(CONFIG_CPU_ARM9TDMI) += proc-arm9tdmi.o obj-$(CONFIG_CPU_ARM920T) += proc-arm920.o obj-$(CONFIG_CPU_ARM922T) += proc-arm922.o obj-$(CONFIG_CPU_ARM925T) += proc-arm925.o obj-$(CONFIG_CPU_ARM926T) += proc-arm926.o +obj-$(CONFIG_CPU_ARM940T) += proc-arm940.o +obj-$(CONFIG_CPU_ARM946E) += proc-arm946.o obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o obj-$(CONFIG_CPU_ARM1022) += proc-arm1022.o diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S index db743e51021..9fb7b0e25ea 100644 --- a/arch/arm/mm/abort-lv4t.S +++ b/arch/arm/mm/abort-lv4t.S @@ -19,11 +19,16 @@ */ ENTRY(v4t_late_abort) tst r3, #PSR_T_BIT @ check for thumb mode +#ifdef CONFIG_CPU_CP15_MMU mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR + bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR +#else + mov r0, #0 @ clear r0, r1 (no FSR/FAR) + mov r1, #0 +#endif bne .data_thumb_abort ldr r8, [r2] @ read arm instruction - bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR tst r8, #1 << 20 @ L = 1 -> write? orreq r1, r1, #1 << 11 @ yes. and r7, r8, #15 << 24 diff --git a/arch/arm/mm/abort-nommu.S b/arch/arm/mm/abort-nommu.S new file mode 100644 index 00000000000..a7cc7f9ee45 --- /dev/null +++ b/arch/arm/mm/abort-nommu.S @@ -0,0 +1,19 @@ +#include <linux/linkage.h> +#include <asm/assembler.h> +/* + * Function: nommu_early_abort + * + * Params : r2 = address of aborted instruction + * : r3 = saved SPSR + * + * Returns : r0 = 0 (abort address) + * : r1 = 0 (FSR) + * + * Note: There is no FSR/FAR on !CPU_CP15_MMU cores. + * Just fill zero into the registers. + */ + .align 5 +ENTRY(nommu_early_abort) + mov r0, #0 @ clear r0, r1 (no FSR/FAR) + mov r1, #0 + mov pc, lr diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index e0d21bbbe7d..aa109f074dd 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -735,7 +735,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) /* * We got a fault - fix it up, or die. */ - do_bad_area(current, current->mm, addr, fsr, regs); + do_bad_area(addr, fsr, regs); return 0; swp: diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S index b8ad5d58ebe..b2908063ed6 100644 --- a/arch/arm/mm/cache-v4.S +++ b/arch/arm/mm/cache-v4.S @@ -29,9 +29,13 @@ ENTRY(v4_flush_user_cache_all) * Clean and invalidate the entire cache. */ ENTRY(v4_flush_kern_cache_all) +#ifdef CPU_CP15 mov r0, #0 mcr p15, 0, r0, c7, c7, 0 @ flush ID cache mov pc, lr +#else + /* FALLTHROUGH */ +#endif /* * flush_user_cache_range(start, end, flags) @@ -44,9 +48,13 @@ ENTRY(v4_flush_kern_cache_all) * - flags - vma_area_struct flags describing address space */ ENTRY(v4_flush_user_cache_range) +#ifdef CPU_CP15 mov ip, #0 mcreq p15, 0, ip, c7, c7, 0 @ flush ID cache mov pc, lr +#else + /* FALLTHROUGH */ +#endif /* * coherent_kern_range(start, end) @@ -108,8 +116,10 @@ ENTRY(v4_dma_inv_range) * - end - virtual end address */ ENTRY(v4_dma_flush_range) +#ifdef CPU_CP15 mov r0, #0 mcr p15, 0, r0, c7, c7, 0 @ flush ID cache +#endif /* FALLTHROUGH */ /* diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c new file mode 100644 index 00000000000..79e80020242 --- /dev/null +++ b/arch/arm/mm/context.c @@ -0,0 +1,45 @@ +/* + * linux/arch/arm/mm/context.c + * + * Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/mm.h> + +#include <asm/mmu_context.h> +#include <asm/tlbflush.h> + +unsigned int cpu_last_asid = { 1 << ASID_BITS }; + +/* + * We fork()ed a process, and we need a new context for the child + * to run in. We reserve version 0 for initial tasks so we will + * always allocate an ASID. + */ +void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + mm->context.id = 0; +} + +void __new_context(struct mm_struct *mm) +{ + unsigned int asid; + + asid = ++cpu_last_asid; + if (asid == 0) + asid = cpu_last_asid = 1 << ASID_BITS; + + /* + * If we've used up all our ASIDs, we need + * to start a new version and flush the TLB. + */ + if ((asid & ~ASID_MASK) == 0) + flush_tlb_all(); + + mm->context.id = asid; +} diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index fc69dccdace..df1645e14b4 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -20,6 +20,8 @@ #include <asm/pgtable.h> #include <asm/tlbflush.h> +#include "mm.h" + /* * 0xffff8000 to 0xffffffff is reserved for any ARM architecture * specific hacks for copying pages efficiently. @@ -27,8 +29,6 @@ #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ L_PTE_CACHEABLE) -#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) - static DEFINE_SPINLOCK(minicache_lock); /* diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 269ce6913ee..3d0d3a963d2 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -17,6 +17,8 @@ #include <asm/tlbflush.h> #include <asm/cacheflush.h> +#include "mm.h" + #if SHMLBA > 16384 #error FIX ME #endif @@ -24,8 +26,6 @@ #define from_address (0xffff8000) #define to_address (0xffffc000) -#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) - static DEFINE_SPINLOCK(v6_lock); /* diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index 42a6ee255ce..84ebe0aa379 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -20,6 +20,8 @@ #include <asm/pgtable.h> #include <asm/tlbflush.h> +#include "mm.h" + /* * 0xffff8000 to 0xffffffff is reserved for any ARM architecture * specific hacks for copying pages efficiently. @@ -29,8 +31,6 @@ #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ L_PTE_CACHEABLE) -#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) - static DEFINE_SPINLOCK(minicache_lock); /* diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index c5e0622c776..f0943d160ff 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -131,10 +131,11 @@ __do_user_fault(struct task_struct *tsk, unsigned long addr, force_sig_info(sig, &si, tsk); } -void -do_bad_area(struct task_struct *tsk, struct mm_struct *mm, unsigned long addr, - unsigned int fsr, struct pt_regs *regs) +void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { + struct task_struct *tsk = current; + struct mm_struct *mm = tsk->active_mm; + /* * If we are in kernel mode at this point, we * have no context to handle this fault with. @@ -319,7 +320,6 @@ static int do_translation_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { - struct task_struct *tsk; unsigned int index; pgd_t *pgd, *pgd_k; pmd_t *pmd, *pmd_k; @@ -351,9 +351,7 @@ do_translation_fault(unsigned long addr, unsigned int fsr, return 0; bad_area: - tsk = current; - - do_bad_area(tsk, tsk->active_mm, addr, fsr, regs); + do_bad_area(addr, fsr, regs); return 0; } @@ -364,8 +362,7 @@ bad_area: static int do_sect_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { - struct task_struct *tsk = current; - do_bad_area(tsk, tsk->active_mm, addr, fsr, regs); + do_bad_area(addr, fsr, regs); return 0; } diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h index 73b59e83227..49e9e3804de 100644 --- a/arch/arm/mm/fault.h +++ b/arch/arm/mm/fault.h @@ -1,6 +1,3 @@ -void do_bad_area(struct task_struct *tsk, struct mm_struct *mm, - unsigned long addr, unsigned int fsr, struct pt_regs *regs); - -void show_pte(struct mm_struct *mm, unsigned long addr); +void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs); unsigned long search_exception_table(unsigned long addr); diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index d438ce41cdd..454205b789d 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -15,12 +15,12 @@ #include <asm/system.h> #include <asm/tlbflush.h> +#include "mm.h" + #ifdef CONFIG_CPU_CACHE_VIPT #define ALIAS_FLUSH_START 0xffff4000 -#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) - static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) { unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT); @@ -107,7 +107,7 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, /* VIPT non-aliasing cache */ if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask) && - vma->vm_flags | VM_EXEC) { + vma->vm_flags & VM_EXEC) { unsigned long addr = (unsigned long)kaddr; /* only flushing the kernel mapping on non-aliasing VIPT */ __cpuc_coherent_kern_range(addr, addr + len); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index fe3f7f62500..22217fe2650 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -25,10 +25,9 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); +#include "mm.h" -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -extern void _stext, _text, _etext, __data_start, _end, __init_begin, __init_end; +extern void _text, _etext, __data_start, _end, __init_begin, __init_end; extern unsigned long phys_initrd_start; extern unsigned long phys_initrd_size; @@ -38,12 +37,6 @@ extern unsigned long phys_initrd_size; */ static struct meminfo meminfo __initdata = { 0, }; -/* - * empty_zero_page is a special page that is used for - * zero-initialized data and COW. - */ -struct page *empty_zero_page; - void show_mem(void) { int free = 0, total = 0, reserved = 0; @@ -83,16 +76,6 @@ void show_mem(void) printk("%d pages swap cached\n", cached); } -static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) -{ - return pmd_offset(pgd, virt); -} - -static inline pmd_t *pmd_off_k(unsigned long virt) -{ - return pmd_off(pgd_offset_k(virt), virt); -} - #define for_each_nodebank(iter,mi,no) \ for (iter = 0; iter < mi->nr_banks; iter++) \ if (mi->bank[iter].node == no) @@ -176,62 +159,20 @@ static int __init check_initrd(struct meminfo *mi) return initrd_node; } -/* - * Reserve the various regions of node 0 - */ -static __init void reserve_node_zero(pg_data_t *pgdat) +static inline void map_memory_bank(struct membank *bank) { - unsigned long res_size = 0; - - /* - * Register the kernel text and data with bootmem. - * Note that this can only be in node 0. - */ -#ifdef CONFIG_XIP_KERNEL - reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start); -#else - reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext); -#endif - - /* - * Reserve the page tables. These are already in use, - * and can only be in node 0. - */ - reserve_bootmem_node(pgdat, __pa(swapper_pg_dir), - PTRS_PER_PGD * sizeof(pgd_t)); - - /* - * Hmm... This should go elsewhere, but we really really need to - * stop things allocating the low memory; ideally we need a better - * implementation of GFP_DMA which does not assume that DMA-able - * memory starts at zero. - */ - if (machine_is_integrator() || machine_is_cintegrator()) - res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; +#ifdef CONFIG_MMU + struct map_desc map; - /* - * These should likewise go elsewhere. They pre-reserve the - * screen memory region at the start of main system memory. - */ - if (machine_is_edb7211()) - res_size = 0x00020000; - if (machine_is_p720t()) - res_size = 0x00014000; + map.pfn = __phys_to_pfn(bank->start); + map.virtual = __phys_to_virt(bank->start); + map.length = bank->size; + map.type = MT_MEMORY; -#ifdef CONFIG_SA1111 - /* - * Because of the SA1111 DMA bug, we want to preserve our - * precious DMA-able memory... - */ - res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; + create_mapping(&map); #endif - if (res_size) - reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size); } -void __init build_mem_type_table(void); -void __init create_mapping(struct map_desc *md); - static unsigned long __init bootmem_init_node(int node, int initrd_node, struct meminfo *mi) { @@ -248,23 +189,18 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi) * Calculate the pfn range, and map the memory banks for this node. */ for_each_nodebank(i, mi, node) { + struct membank *bank = &mi->bank[i]; unsigned long start, end; - struct map_desc map; - start = mi->bank[i].start >> PAGE_SHIFT; - end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT; + start = bank->start >> PAGE_SHIFT; + end = (bank->start + bank->size) >> PAGE_SHIFT; if (start_pfn > start) start_pfn = start; if (end_pfn < end) end_pfn = end; - map.pfn = __phys_to_pfn(mi->bank[i].start); - map.virtual = __phys_to_virt(mi->bank[i].start); - map.length = mi->bank[i].size; - map.type = MT_MEMORY; - - create_mapping(&map); + map_memory_bank(bank); } /* @@ -346,9 +282,9 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi) return end_pfn; } -static void __init bootmem_init(struct meminfo *mi) +void __init bootmem_init(struct meminfo *mi) { - unsigned long addr, memend_pfn = 0; + unsigned long memend_pfn = 0; int node, initrd_node, i; /* @@ -361,26 +297,6 @@ static void __init bootmem_init(struct meminfo *mi) memcpy(&meminfo, mi, sizeof(meminfo)); /* - * Clear out all the mappings below the kernel image. - */ - for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); -#ifdef CONFIG_XIP_KERNEL - /* The XIP kernel is mapped in the module area -- skip over it */ - addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK; -#endif - for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); - - /* - * Clear out all the kernel space mappings, except for the first - * memory bank, up to the end of the vmalloc region. - */ - for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size); - addr < VMALLOC_END; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); - - /* * Locate which node contains the ramdisk image, if any. */ initrd_node = check_initrd(mi); @@ -413,114 +329,6 @@ static void __init bootmem_init(struct meminfo *mi) max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET; } -/* - * Set up device the mappings. Since we clear out the page tables for all - * mappings above VMALLOC_END, we will remove any debug device mappings. - * This means you have to be careful how you debug this function, or any - * called function. This means you can't use any function or debugging - * method which may touch any device, otherwise the kernel _will_ crash. - */ -static void __init devicemaps_init(struct machine_desc *mdesc) -{ - struct map_desc map; - unsigned long addr; - void *vectors; - - /* - * Allocate the vector page early. - */ - vectors = alloc_bootmem_low_pages(PAGE_SIZE); - BUG_ON(!vectors); - - for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); - - /* - * Map the kernel if it is XIP. - * It is always first in the modulearea. - */ -#ifdef CONFIG_XIP_KERNEL - map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PGDIR_MASK); - map.virtual = MODULE_START; - map.length = ((unsigned long)&_etext - map.virtual + ~PGDIR_MASK) & PGDIR_MASK; - map.type = MT_ROM; - create_mapping(&map); -#endif - - /* - * Map the cache flushing regions. - */ -#ifdef FLUSH_BASE - map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS); - map.virtual = FLUSH_BASE; - map.length = SZ_1M; - map.type = MT_CACHECLEAN; - create_mapping(&map); -#endif -#ifdef FLUSH_BASE_MINICACHE - map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M); - map.virtual = FLUSH_BASE_MINICACHE; - map.length = SZ_1M; - map.type = MT_MINICLEAN; - create_mapping(&map); -#endif - - /* - * Create a mapping for the machine vectors at the high-vectors - * location (0xffff0000). If we aren't using high-vectors, also - * create a mapping at the low-vectors virtual address. - */ - map.pfn = __phys_to_pfn(virt_to_phys(vectors)); - map.virtual = 0xffff0000; - map.length = PAGE_SIZE; - map.type = MT_HIGH_VECTORS; - create_mapping(&map); - - if (!vectors_high()) { - map.virtual = 0; - map.type = MT_LOW_VECTORS; - create_mapping(&map); - } - - /* - * Ask the machine support to map in the statically mapped devices. - */ - if (mdesc->map_io) - mdesc->map_io(); - - /* - * Finally flush the caches and tlb to ensure that we're in a - * consistent state wrt the writebuffer. This also ensures that - * any write-allocated cache lines in the vector page are written - * back. After this point, we can start to touch devices again. - */ - local_flush_tlb_all(); - flush_cache_all(); -} - -/* - * paging_init() sets up the page tables, initialises the zone memory - * maps, and sets up the zero page, bad page and bad page tables. - */ -void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) -{ - void *zero_page; - - build_mem_type_table(); - bootmem_init(mi); - devicemaps_init(mdesc); - - top_pmd = pmd_off_k(0xffff0000); - - /* - * allocate the zero page. Note that we count on this going ok. - */ - zero_page = alloc_bootmem_low_pages(PAGE_SIZE); - memzero(zero_page, PAGE_SIZE); - empty_zero_page = virt_to_page(zero_page); - flush_dcache_page(empty_zero_page); -} - static inline void free_area(unsigned long addr, unsigned long end, char *s) { unsigned int size = (end - addr) >> 10; diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c deleted file mode 100644 index 38769f5862b..00000000000 --- a/arch/arm/mm/mm-armv.c +++ /dev/null @@ -1,663 +0,0 @@ -/* - * linux/arch/arm/mm/mm-armv.c - * - * Copyright (C) 1998-2005 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Page table sludge for ARM v3 and v4 processor architectures. - */ -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/bootmem.h> -#include <linux/highmem.h> -#include <linux/nodemask.h> - -#include <asm/pgalloc.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <asm/tlbflush.h> - -#include <asm/mach/map.h> - -#define CPOLICY_UNCACHED 0 -#define CPOLICY_BUFFERED 1 -#define CPOLICY_WRITETHROUGH 2 -#define CPOLICY_WRITEBACK 3 -#define CPOLICY_WRITEALLOC 4 - -static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK; -static unsigned int ecc_mask __initdata = 0; -pgprot_t pgprot_kernel; - -EXPORT_SYMBOL(pgprot_kernel); - -pmd_t *top_pmd; - -struct cachepolicy { - const char policy[16]; - unsigned int cr_mask; - unsigned int pmd; - unsigned int pte; -}; - -static struct cachepolicy cache_policies[] __initdata = { - { - .policy = "uncached", - .cr_mask = CR_W|CR_C, - .pmd = PMD_SECT_UNCACHED, - .pte = 0, - }, { - .policy = "buffered", - .cr_mask = CR_C, - .pmd = PMD_SECT_BUFFERED, - .pte = PTE_BUFFERABLE, - }, { - .policy = "writethrough", - .cr_mask = 0, - .pmd = PMD_SECT_WT, - .pte = PTE_CACHEABLE, - }, { - .policy = "writeback", - .cr_mask = 0, - .pmd = PMD_SECT_WB, - .pte = PTE_BUFFERABLE|PTE_CACHEABLE, - }, { - .policy = "writealloc", - .cr_mask = 0, - .pmd = PMD_SECT_WBWA, - .pte = PTE_BUFFERABLE|PTE_CACHEABLE, - } -}; - -/* - * These are useful for identifing cache coherency - * problems by allowing the cache or the cache and - * writebuffer to be turned off. (Note: the write - * buffer should not be on and the cache off). - */ -static void __init early_cachepolicy(char **p) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(cache_policies); i++) { - int len = strlen(cache_policies[i].policy); - - if (memcmp(*p, cache_policies[i].policy, len) == 0) { - cachepolicy = i; - cr_alignment &= ~cache_policies[i].cr_mask; - cr_no_alignment &= ~cache_policies[i].cr_mask; - *p += len; - break; - } - } - if (i == ARRAY_SIZE(cache_policies)) - printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n"); - flush_cache_all(); - set_cr(cr_alignment); -} - -static void __init early_nocache(char **__unused) -{ - char *p = "buffered"; - printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p); - early_cachepolicy(&p); -} - -static void __init early_nowrite(char **__unused) -{ - char *p = "uncached"; - printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p); - early_cachepolicy(&p); -} - -static void __init early_ecc(char **p) -{ - if (memcmp(*p, "on", 2) == 0) { - ecc_mask = PMD_PROTECTION; - *p += 2; - } else if (memcmp(*p, "off", 3) == 0) { - ecc_mask = 0; - *p += 3; - } -} - -__early_param("nocache", early_nocache); -__early_param("nowb", early_nowrite); -__early_param("cachepolicy=", early_cachepolicy); -__early_param("ecc=", early_ecc); - -static int __init noalign_setup(char *__unused) -{ - cr_alignment &= ~CR_A; - cr_no_alignment &= ~CR_A; - set_cr(cr_alignment); - return 1; -} - -__setup("noalign", noalign_setup); - -#define FIRST_KERNEL_PGD_NR (FIRST_USER_PGD_NR + USER_PTRS_PER_PGD) - -static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) -{ - return pmd_offset(pgd, virt); -} - -static inline pmd_t *pmd_off_k(unsigned long virt) -{ - return pmd_off(pgd_offset_k(virt), virt); -} - -/* - * need to get a 16k page for level 1 - */ -pgd_t *get_pgd_slow(struct mm_struct *mm) -{ - pgd_t *new_pgd, *init_pgd; - pmd_t *new_pmd, *init_pmd; - pte_t *new_pte, *init_pte; - - new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2); - if (!new_pgd) - goto no_pgd; - - memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t)); - - /* - * Copy over the kernel and IO PGD entries - */ - init_pgd = pgd_offset_k(0); - memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR, - (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t)); - - clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t)); - - if (!vectors_high()) { - /* - * On ARM, first page must always be allocated since it - * contains the machine vectors. - */ - new_pmd = pmd_alloc(mm, new_pgd, 0); - if (!new_pmd) - goto no_pmd; - - new_pte = pte_alloc_map(mm, new_pmd, 0); - if (!new_pte) - goto no_pte; - - init_pmd = pmd_offset(init_pgd, 0); - init_pte = pte_offset_map_nested(init_pmd, 0); - set_pte(new_pte, *init_pte); - pte_unmap_nested(init_pte); - pte_unmap(new_pte); - } - - return new_pgd; - -no_pte: - pmd_free(new_pmd); -no_pmd: - free_pages((unsigned long)new_pgd, 2); -no_pgd: - return NULL; -} - -void free_pgd_slow(pgd_t *pgd) -{ - pmd_t *pmd; - struct page *pte; - - if (!pgd) - return; - - /* pgd is always present and good */ - pmd = pmd_off(pgd, 0); - if (pmd_none(*pmd)) - goto free; - if (pmd_bad(*pmd)) { - pmd_ERROR(*pmd); - pmd_clear(pmd); - goto free; - } - - pte = pmd_page(*pmd); - pmd_clear(pmd); - dec_zone_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE); - pte_lock_deinit(pte); - pte_free(pte); - pmd_free(pmd); -free: - free_pages((unsigned long) pgd, 2); -} - -/* - * Create a SECTION PGD between VIRT and PHYS in domain - * DOMAIN with protection PROT. This operates on half- - * pgdir entry increments. - */ -static inline void -alloc_init_section(unsigned long virt, unsigned long phys, int prot) -{ - pmd_t *pmdp = pmd_off_k(virt); - - if (virt & (1 << 20)) - pmdp++; - - *pmdp = __pmd(phys | prot); - flush_pmd_entry(pmdp); -} - -/* - * Create a SUPER SECTION PGD between VIRT and PHYS with protection PROT - */ -static inline void -alloc_init_supersection(unsigned long virt, unsigned long phys, int prot) -{ - int i; - - for (i = 0; i < 16; i += 1) { - alloc_init_section(virt, phys, prot | PMD_SECT_SUPER); - - virt += (PGDIR_SIZE / 2); - } -} - -/* - * Add a PAGE mapping between VIRT and PHYS in domain - * DOMAIN with protection PROT. Note that due to the - * way we map the PTEs, we must allocate two PTE_SIZE'd - * blocks - one for the Linux pte table, and one for - * the hardware pte table. - */ -static inline void -alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pgprot_t prot) -{ - pmd_t *pmdp = pmd_off_k(virt); - pte_t *ptep; - - if (pmd_none(*pmdp)) { - ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * - sizeof(pte_t)); - - __pmd_populate(pmdp, __pa(ptep) | prot_l1); - } - ptep = pte_offset_kernel(pmdp, virt); - - set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot)); -} - -struct mem_types { - unsigned int prot_pte; - unsigned int prot_l1; - unsigned int prot_sect; - unsigned int domain; -}; - -static struct mem_types mem_types[] __initdata = { - [MT_DEVICE] = { - .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_WRITE, - .prot_l1 = PMD_TYPE_TABLE, - .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED | - PMD_SECT_AP_WRITE, - .domain = DOMAIN_IO, - }, - [MT_CACHECLEAN] = { - .prot_sect = PMD_TYPE_SECT | PMD_BIT4, - .domain = DOMAIN_KERNEL, - }, - [MT_MINICLEAN] = { - .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_MINICACHE, - .domain = DOMAIN_KERNEL, - }, - [MT_LOW_VECTORS] = { - .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_EXEC, - .prot_l1 = PMD_TYPE_TABLE, - .domain = DOMAIN_USER, - }, - [MT_HIGH_VECTORS] = { - .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_USER | L_PTE_EXEC, - .prot_l1 = PMD_TYPE_TABLE, - .domain = DOMAIN_USER, - }, - [MT_MEMORY] = { - .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_AP_WRITE, - .domain = DOMAIN_KERNEL, - }, - [MT_ROM] = { - .prot_sect = PMD_TYPE_SECT | PMD_BIT4, - .domain = DOMAIN_KERNEL, - }, - [MT_IXP2000_DEVICE] = { /* IXP2400 requires XCB=101 for on-chip I/O */ - .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_WRITE, - .prot_l1 = PMD_TYPE_TABLE, - .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED | - PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE | - PMD_SECT_TEX(1), - .domain = DOMAIN_IO, - }, - [MT_NONSHARED_DEVICE] = { - .prot_l1 = PMD_TYPE_TABLE, - .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_NONSHARED_DEV | - PMD_SECT_AP_WRITE, - .domain = DOMAIN_IO, - } -}; - -/* - * Adjust the PMD section entries according to the CPU in use. - */ -void __init build_mem_type_table(void) -{ - struct cachepolicy *cp; - unsigned int cr = get_cr(); - unsigned int user_pgprot, kern_pgprot; - int cpu_arch = cpu_architecture(); - int i; - -#if defined(CONFIG_CPU_DCACHE_DISABLE) - if (cachepolicy > CPOLICY_BUFFERED) - cachepolicy = CPOLICY_BUFFERED; -#elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH) - if (cachepolicy > CPOLICY_WRITETHROUGH) - cachepolicy = CPOLICY_WRITETHROUGH; -#endif - if (cpu_arch < CPU_ARCH_ARMv5) { - if (cachepolicy >= CPOLICY_WRITEALLOC) - cachepolicy = CPOLICY_WRITEBACK; - ecc_mask = 0; - } - - /* - * Xscale must not have PMD bit 4 set for section mappings. - */ - if (cpu_is_xscale()) - for (i = 0; i < ARRAY_SIZE(mem_types); i++) - mem_types[i].prot_sect &= ~PMD_BIT4; - - /* - * ARMv5 and lower, excluding Xscale, bit 4 must be set for - * page tables. - */ - if (cpu_arch < CPU_ARCH_ARMv6 && !cpu_is_xscale()) - for (i = 0; i < ARRAY_SIZE(mem_types); i++) - if (mem_types[i].prot_l1) - mem_types[i].prot_l1 |= PMD_BIT4; - - cp = &cache_policies[cachepolicy]; - kern_pgprot = user_pgprot = cp->pte; - - /* - * Enable CPU-specific coherency if supported. - * (Only available on XSC3 at the moment.) - */ - if (arch_is_coherent()) { - if (cpu_is_xsc3()) { - mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; - mem_types[MT_MEMORY].prot_pte |= L_PTE_COHERENT; - } - } - - /* - * ARMv6 and above have extended page tables. - */ - if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) { - /* - * bit 4 becomes XN which we must clear for the - * kernel memory mapping. - */ - mem_types[MT_MEMORY].prot_sect &= ~PMD_SECT_XN; - mem_types[MT_ROM].prot_sect &= ~PMD_SECT_XN; - - /* - * Mark cache clean areas and XIP ROM read only - * from SVC mode and no access from userspace. - */ - mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; - mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; - mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; - - /* - * Mark the device area as "shared device" - */ - mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE; - mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED; - - /* - * User pages need to be mapped with the ASID - * (iow, non-global) - */ - user_pgprot |= L_PTE_ASID; - -#ifdef CONFIG_SMP - /* - * Mark memory with the "shared" attribute for SMP systems - */ - user_pgprot |= L_PTE_SHARED; - kern_pgprot |= L_PTE_SHARED; - mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; -#endif - } - - for (i = 0; i < 16; i++) { - unsigned long v = pgprot_val(protection_map[i]); - v = (v & ~(L_PTE_BUFFERABLE|L_PTE_CACHEABLE)) | user_pgprot; - protection_map[i] = __pgprot(v); - } - - mem_types[MT_LOW_VECTORS].prot_pte |= kern_pgprot; - mem_types[MT_HIGH_VECTORS].prot_pte |= kern_pgprot; - - if (cpu_arch >= CPU_ARCH_ARMv5) { -#ifndef CONFIG_SMP - /* - * Only use write-through for non-SMP systems - */ - mem_types[MT_LOW_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE; - mem_types[MT_HIGH_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE; -#endif - } else { - mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1); - } - - pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | - L_PTE_DIRTY | L_PTE_WRITE | - L_PTE_EXEC | kern_pgprot); - - mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask; - mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask; - mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd; - mem_types[MT_ROM].prot_sect |= cp->pmd; - - switch (cp->pmd) { - case PMD_SECT_WT: - mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT; - break; - case PMD_SECT_WB: - case PMD_SECT_WBWA: - mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB; - break; - } - printk("Memory policy: ECC %sabled, Data cache %s\n", - ecc_mask ? "en" : "dis", cp->policy); -} - -#define vectors_base() (vectors_high() ? 0xffff0000 : 0) - -/* - * Create the page directory entries and any necessary - * page tables for the mapping specified by `md'. We - * are able to cope here with varying sizes and address - * offsets, and we take full advantage of sections and - * supersections. - */ -void __init create_mapping(struct map_desc *md) -{ - unsigned long virt, length; - int prot_sect, prot_l1, domain; - pgprot_t prot_pte; - unsigned long off = (u32)__pfn_to_phys(md->pfn); - - if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { - printk(KERN_WARNING "BUG: not creating mapping for " - "0x%08llx at 0x%08lx in user region\n", - __pfn_to_phys((u64)md->pfn), md->virtual); - return; - } - - if ((md->type == MT_DEVICE || md->type == MT_ROM) && - md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) { - printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx " - "overlaps vmalloc space\n", - __pfn_to_phys((u64)md->pfn), md->virtual); - } - - domain = mem_types[md->type].domain; - prot_pte = __pgprot(mem_types[md->type].prot_pte); - prot_l1 = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain); - prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain); - - /* - * Catch 36-bit addresses - */ - if(md->pfn >= 0x100000) { - if(domain) { - printk(KERN_ERR "MM: invalid domain in supersection " - "mapping for 0x%08llx at 0x%08lx\n", - __pfn_to_phys((u64)md->pfn), md->virtual); - return; - } - if((md->virtual | md->length | __pfn_to_phys(md->pfn)) - & ~SUPERSECTION_MASK) { - printk(KERN_ERR "MM: cannot create mapping for " - "0x%08llx at 0x%08lx invalid alignment\n", - __pfn_to_phys((u64)md->pfn), md->virtual); - return; - } - - /* - * Shift bits [35:32] of address into bits [23:20] of PMD - * (See ARMv6 spec). - */ - off |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20); - } - - virt = md->virtual; - off -= virt; - length = md->length; - - if (mem_types[md->type].prot_l1 == 0 && - (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) { - printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not " - "be mapped using pages, ignoring.\n", - __pfn_to_phys(md->pfn), md->virtual); - return; - } - - while ((virt & 0xfffff || (virt + off) & 0xfffff) && length >= PAGE_SIZE) { - alloc_init_page(virt, virt + off, prot_l1, prot_pte); - - virt += PAGE_SIZE; - length -= PAGE_SIZE; - } - - /* N.B. ARMv6 supersections are only defined to work with domain 0. - * Since domain assignments can in fact be arbitrary, the - * 'domain == 0' check below is required to insure that ARMv6 - * supersections are only allocated for domain 0 regardless - * of the actual domain assignments in use. - */ - if ((cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3()) - && domain == 0) { - /* - * Align to supersection boundary if !high pages. - * High pages have already been checked for proper - * alignment above and they will fail the SUPSERSECTION_MASK - * check because of the way the address is encoded into - * offset. - */ - if (md->pfn <= 0x100000) { - while ((virt & ~SUPERSECTION_MASK || - (virt + off) & ~SUPERSECTION_MASK) && - length >= (PGDIR_SIZE / 2)) { - alloc_init_section(virt, virt + off, prot_sect); - - virt += (PGDIR_SIZE / 2); - length -= (PGDIR_SIZE / 2); - } - } - - while (length >= SUPERSECTION_SIZE) { - alloc_init_supersection(virt, virt + off, prot_sect); - - virt += SUPERSECTION_SIZE; - length -= SUPERSECTION_SIZE; - } - } - - /* - * A section mapping covers half a "pgdir" entry. - */ - while (length >= (PGDIR_SIZE / 2)) { - alloc_init_section(virt, virt + off, prot_sect); - - virt += (PGDIR_SIZE / 2); - length -= (PGDIR_SIZE / 2); - } - - while (length >= PAGE_SIZE) { - alloc_init_page(virt, virt + off, prot_l1, prot_pte); - - virt += PAGE_SIZE; - length -= PAGE_SIZE; - } -} - -/* - * In order to soft-boot, we need to insert a 1:1 mapping in place of - * the user-mode pages. This will then ensure that we have predictable - * results when turning the mmu off - */ -void setup_mm_for_reboot(char mode) -{ - unsigned long base_pmdval; - pgd_t *pgd; - int i; - - if (current->mm && current->mm->pgd) - pgd = current->mm->pgd; - else - pgd = init_mm.pgd; - - base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT; - if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) - base_pmdval |= PMD_BIT4; - - for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) { - unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval; - pmd_t *pmd; - - pmd = pmd_off(pgd, i << PGDIR_SHIFT); - pmd[0] = __pmd(pmdval); - pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1))); - flush_pmd_entry(pmd); - } -} - -/* - * Create the architecture specific mappings - */ -void __init iotable_init(struct map_desc *io_desc, int nr) -{ - int i; - - for (i = 0; i < nr; i++) - create_mapping(io_desc + i); -} diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h new file mode 100644 index 00000000000..bb2bc9ab6bd --- /dev/null +++ b/arch/arm/mm/mm.h @@ -0,0 +1,22 @@ +/* the upper-most page table pointer */ +extern pmd_t *top_pmd; + +#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) + +static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) +{ + return pmd_offset(pgd, virt); +} + +static inline pmd_t *pmd_off_k(unsigned long virt) +{ + return pmd_off(pgd_offset_k(virt), virt); +} + +struct map_desc; +struct meminfo; +struct pglist_data; + +void __init create_mapping(struct map_desc *md); +void __init bootmem_init(struct meminfo *mi); +void reserve_node_zero(struct pglist_data *pgdat); diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 29e54807c5b..b0b5f469407 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -114,3 +114,25 @@ full_search: } } + +/* + * You really shouldn't be using read() or write() on /dev/mem. This + * might go away in the future. + */ +int valid_phys_addr_range(unsigned long addr, size_t size) +{ + if (addr + size > __pa(high_memory)) + return 0; + + return 1; +} + +/* + * We don't use supersection mappings for mmap() on /dev/mem, which + * means that we can't map the memory area above the 4G barrier into + * userspace. + */ +int valid_mmap_phys_addr_range(unsigned long pfn, size_t size) +{ + return !(pfn + (size >> PAGE_SHIFT) > 0x00100000); +} diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 0d90227a0a3..e566cbe4b22 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -1,45 +1,771 @@ /* * linux/arch/arm/mm/mmu.c * - * Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved. + * Copyright (C) 1995-2005 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> #include <linux/init.h> -#include <linux/sched.h> -#include <linux/mm.h> +#include <linux/bootmem.h> +#include <linux/mman.h> +#include <linux/nodemask.h> -#include <asm/mmu_context.h> -#include <asm/tlbflush.h> +#include <asm/mach-types.h> +#include <asm/setup.h> +#include <asm/sizes.h> +#include <asm/tlb.h> -unsigned int cpu_last_asid = { 1 << ASID_BITS }; +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "mm.h" + +DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); + +extern void _stext, __data_start, _end; +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; + +/* + * empty_zero_page is a special page that is used for + * zero-initialized data and COW. + */ +struct page *empty_zero_page; /* - * We fork()ed a process, and we need a new context for the child - * to run in. We reserve version 0 for initial tasks so we will - * always allocate an ASID. + * The pmd table for the upper-most set of pages. */ -void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) +pmd_t *top_pmd; + +#define CPOLICY_UNCACHED 0 +#define CPOLICY_BUFFERED 1 +#define CPOLICY_WRITETHROUGH 2 +#define CPOLICY_WRITEBACK 3 +#define CPOLICY_WRITEALLOC 4 + +static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK; +static unsigned int ecc_mask __initdata = 0; +pgprot_t pgprot_kernel; + +EXPORT_SYMBOL(pgprot_kernel); + +struct cachepolicy { + const char policy[16]; + unsigned int cr_mask; + unsigned int pmd; + unsigned int pte; +}; + +static struct cachepolicy cache_policies[] __initdata = { + { + .policy = "uncached", + .cr_mask = CR_W|CR_C, + .pmd = PMD_SECT_UNCACHED, + .pte = 0, + }, { + .policy = "buffered", + .cr_mask = CR_C, + .pmd = PMD_SECT_BUFFERED, + .pte = PTE_BUFFERABLE, + }, { + .policy = "writethrough", + .cr_mask = 0, + .pmd = PMD_SECT_WT, + .pte = PTE_CACHEABLE, + }, { + .policy = "writeback", + .cr_mask = 0, + .pmd = PMD_SECT_WB, + .pte = PTE_BUFFERABLE|PTE_CACHEABLE, + }, { + .policy = "writealloc", + .cr_mask = 0, + .pmd = PMD_SECT_WBWA, + .pte = PTE_BUFFERABLE|PTE_CACHEABLE, + } +}; + +/* + * These are useful for identifing cache coherency + * problems by allowing the cache or the cache and + * writebuffer to be turned off. (Note: the write + * buffer should not be on and the cache off). + */ +static void __init early_cachepolicy(char **p) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(cache_policies); i++) { + int len = strlen(cache_policies[i].policy); + + if (memcmp(*p, cache_policies[i].policy, len) == 0) { + cachepolicy = i; + cr_alignment &= ~cache_policies[i].cr_mask; + cr_no_alignment &= ~cache_policies[i].cr_mask; + *p += len; + break; + } + } + if (i == ARRAY_SIZE(cache_policies)) + printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n"); + flush_cache_all(); + set_cr(cr_alignment); +} +__early_param("cachepolicy=", early_cachepolicy); + +static void __init early_nocache(char **__unused) +{ + char *p = "buffered"; + printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p); + early_cachepolicy(&p); +} +__early_param("nocache", early_nocache); + +static void __init early_nowrite(char **__unused) +{ + char *p = "uncached"; + printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p); + early_cachepolicy(&p); +} +__early_param("nowb", early_nowrite); + +static void __init early_ecc(char **p) +{ + if (memcmp(*p, "on", 2) == 0) { + ecc_mask = PMD_PROTECTION; + *p += 2; + } else if (memcmp(*p, "off", 3) == 0) { + ecc_mask = 0; + *p += 3; + } +} +__early_param("ecc=", early_ecc); + +static int __init noalign_setup(char *__unused) { - mm->context.id = 0; + cr_alignment &= ~CR_A; + cr_no_alignment &= ~CR_A; + set_cr(cr_alignment); + return 1; } +__setup("noalign", noalign_setup); + +struct mem_types { + unsigned int prot_pte; + unsigned int prot_l1; + unsigned int prot_sect; + unsigned int domain; +}; -void __new_context(struct mm_struct *mm) +static struct mem_types mem_types[] __initdata = { + [MT_DEVICE] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_WRITE, + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED | + PMD_SECT_AP_WRITE, + .domain = DOMAIN_IO, + }, + [MT_CACHECLEAN] = { + .prot_sect = PMD_TYPE_SECT | PMD_BIT4, + .domain = DOMAIN_KERNEL, + }, + [MT_MINICLEAN] = { + .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_MINICACHE, + .domain = DOMAIN_KERNEL, + }, + [MT_LOW_VECTORS] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_EXEC, + .prot_l1 = PMD_TYPE_TABLE, + .domain = DOMAIN_USER, + }, + [MT_HIGH_VECTORS] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_USER | L_PTE_EXEC, + .prot_l1 = PMD_TYPE_TABLE, + .domain = DOMAIN_USER, + }, + [MT_MEMORY] = { + .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_AP_WRITE, + .domain = DOMAIN_KERNEL, + }, + [MT_ROM] = { + .prot_sect = PMD_TYPE_SECT | PMD_BIT4, + .domain = DOMAIN_KERNEL, + }, + [MT_IXP2000_DEVICE] = { /* IXP2400 requires XCB=101 for on-chip I/O */ + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_WRITE, + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED | + PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE | + PMD_SECT_TEX(1), + .domain = DOMAIN_IO, + }, + [MT_NONSHARED_DEVICE] = { + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_NONSHARED_DEV | + PMD_SECT_AP_WRITE, + .domain = DOMAIN_IO, + } +}; + +/* + * Adjust the PMD section entries according to the CPU in use. + */ +static void __init build_mem_type_table(void) { - unsigned int asid; + struct cachepolicy *cp; + unsigned int cr = get_cr(); + unsigned int user_pgprot, kern_pgprot; + int cpu_arch = cpu_architecture(); + int i; - asid = ++cpu_last_asid; - if (asid == 0) - asid = cpu_last_asid = 1 << ASID_BITS; +#if defined(CONFIG_CPU_DCACHE_DISABLE) + if (cachepolicy > CPOLICY_BUFFERED) + cachepolicy = CPOLICY_BUFFERED; +#elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH) + if (cachepolicy > CPOLICY_WRITETHROUGH) + cachepolicy = CPOLICY_WRITETHROUGH; +#endif + if (cpu_arch < CPU_ARCH_ARMv5) { + if (cachepolicy >= CPOLICY_WRITEALLOC) + cachepolicy = CPOLICY_WRITEBACK; + ecc_mask = 0; + } + + /* + * Xscale must not have PMD bit 4 set for section mappings. + */ + if (cpu_is_xscale()) + for (i = 0; i < ARRAY_SIZE(mem_types); i++) + mem_types[i].prot_sect &= ~PMD_BIT4; /* - * If we've used up all our ASIDs, we need - * to start a new version and flush the TLB. + * ARMv5 and lower, excluding Xscale, bit 4 must be set for + * page tables. */ - if ((asid & ~ASID_MASK) == 0) - flush_tlb_all(); + if (cpu_arch < CPU_ARCH_ARMv6 && !cpu_is_xscale()) + for (i = 0; i < ARRAY_SIZE(mem_types); i++) + if (mem_types[i].prot_l1) + mem_types[i].prot_l1 |= PMD_BIT4; + + cp = &cache_policies[cachepolicy]; + kern_pgprot = user_pgprot = cp->pte; + + /* + * Enable CPU-specific coherency if supported. + * (Only available on XSC3 at the moment.) + */ + if (arch_is_coherent()) { + if (cpu_is_xsc3()) { + mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY].prot_pte |= L_PTE_COHERENT; + } + } + + /* + * ARMv6 and above have extended page tables. + */ + if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) { + /* + * bit 4 becomes XN which we must clear for the + * kernel memory mapping. + */ + mem_types[MT_MEMORY].prot_sect &= ~PMD_SECT_XN; + mem_types[MT_ROM].prot_sect &= ~PMD_SECT_XN; + + /* + * Mark cache clean areas and XIP ROM read only + * from SVC mode and no access from userspace. + */ + mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; + mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; + mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; + + /* + * Mark the device area as "shared device" + */ + mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE; + mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED; + + /* + * User pages need to be mapped with the ASID + * (iow, non-global) + */ + user_pgprot |= L_PTE_ASID; + +#ifdef CONFIG_SMP + /* + * Mark memory with the "shared" attribute for SMP systems + */ + user_pgprot |= L_PTE_SHARED; + kern_pgprot |= L_PTE_SHARED; + mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; +#endif + } + + for (i = 0; i < 16; i++) { + unsigned long v = pgprot_val(protection_map[i]); + v = (v & ~(L_PTE_BUFFERABLE|L_PTE_CACHEABLE)) | user_pgprot; + protection_map[i] = __pgprot(v); + } + + mem_types[MT_LOW_VECTORS].prot_pte |= kern_pgprot; + mem_types[MT_HIGH_VECTORS].prot_pte |= kern_pgprot; + + if (cpu_arch >= CPU_ARCH_ARMv5) { +#ifndef CONFIG_SMP + /* + * Only use write-through for non-SMP systems + */ + mem_types[MT_LOW_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE; + mem_types[MT_HIGH_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE; +#endif + } else { + mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1); + } + + pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | + L_PTE_DIRTY | L_PTE_WRITE | + L_PTE_EXEC | kern_pgprot); + + mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask; + mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask; + mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd; + mem_types[MT_ROM].prot_sect |= cp->pmd; + + switch (cp->pmd) { + case PMD_SECT_WT: + mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT; + break; + case PMD_SECT_WB: + case PMD_SECT_WBWA: + mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB; + break; + } + printk("Memory policy: ECC %sabled, Data cache %s\n", + ecc_mask ? "en" : "dis", cp->policy); +} + +#define vectors_base() (vectors_high() ? 0xffff0000 : 0) + +/* + * Create a SECTION PGD between VIRT and PHYS in domain + * DOMAIN with protection PROT. This operates on half- + * pgdir entry increments. + */ +static inline void +alloc_init_section(unsigned long virt, unsigned long phys, int prot) +{ + pmd_t *pmdp = pmd_off_k(virt); + + if (virt & (1 << 20)) + pmdp++; + + *pmdp = __pmd(phys | prot); + flush_pmd_entry(pmdp); +} + +/* + * Create a SUPER SECTION PGD between VIRT and PHYS with protection PROT + */ +static inline void +alloc_init_supersection(unsigned long virt, unsigned long phys, int prot) +{ + int i; + + for (i = 0; i < 16; i += 1) { + alloc_init_section(virt, phys, prot | PMD_SECT_SUPER); + + virt += (PGDIR_SIZE / 2); + } +} + +/* + * Add a PAGE mapping between VIRT and PHYS in domain + * DOMAIN with protection PROT. Note that due to the + * way we map the PTEs, we must allocate two PTE_SIZE'd + * blocks - one for the Linux pte table, and one for + * the hardware pte table. + */ +static inline void +alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pgprot_t prot) +{ + pmd_t *pmdp = pmd_off_k(virt); + pte_t *ptep; + + if (pmd_none(*pmdp)) { + ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * + sizeof(pte_t)); + + __pmd_populate(pmdp, __pa(ptep) | prot_l1); + } + ptep = pte_offset_kernel(pmdp, virt); + + set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot)); +} + +/* + * Create the page directory entries and any necessary + * page tables for the mapping specified by `md'. We + * are able to cope here with varying sizes and address + * offsets, and we take full advantage of sections and + * supersections. + */ +void __init create_mapping(struct map_desc *md) +{ + unsigned long virt, length; + int prot_sect, prot_l1, domain; + pgprot_t prot_pte; + unsigned long off = (u32)__pfn_to_phys(md->pfn); + + if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { + printk(KERN_WARNING "BUG: not creating mapping for " + "0x%08llx at 0x%08lx in user region\n", + __pfn_to_phys((u64)md->pfn), md->virtual); + return; + } + + if ((md->type == MT_DEVICE || md->type == MT_ROM) && + md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) { + printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx " + "overlaps vmalloc space\n", + __pfn_to_phys((u64)md->pfn), md->virtual); + } + + domain = mem_types[md->type].domain; + prot_pte = __pgprot(mem_types[md->type].prot_pte); + prot_l1 = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain); + prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain); + + /* + * Catch 36-bit addresses + */ + if(md->pfn >= 0x100000) { + if(domain) { + printk(KERN_ERR "MM: invalid domain in supersection " + "mapping for 0x%08llx at 0x%08lx\n", + __pfn_to_phys((u64)md->pfn), md->virtual); + return; + } + if((md->virtual | md->length | __pfn_to_phys(md->pfn)) + & ~SUPERSECTION_MASK) { + printk(KERN_ERR "MM: cannot create mapping for " + "0x%08llx at 0x%08lx invalid alignment\n", + __pfn_to_phys((u64)md->pfn), md->virtual); + return; + } + + /* + * Shift bits [35:32] of address into bits [23:20] of PMD + * (See ARMv6 spec). + */ + off |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20); + } + + virt = md->virtual; + off -= virt; + length = md->length; + + if (mem_types[md->type].prot_l1 == 0 && + (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) { + printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not " + "be mapped using pages, ignoring.\n", + __pfn_to_phys(md->pfn), md->virtual); + return; + } + + while ((virt & 0xfffff || (virt + off) & 0xfffff) && length >= PAGE_SIZE) { + alloc_init_page(virt, virt + off, prot_l1, prot_pte); + + virt += PAGE_SIZE; + length -= PAGE_SIZE; + } + + /* N.B. ARMv6 supersections are only defined to work with domain 0. + * Since domain assignments can in fact be arbitrary, the + * 'domain == 0' check below is required to insure that ARMv6 + * supersections are only allocated for domain 0 regardless + * of the actual domain assignments in use. + */ + if ((cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3()) + && domain == 0) { + /* + * Align to supersection boundary if !high pages. + * High pages have already been checked for proper + * alignment above and they will fail the SUPSERSECTION_MASK + * check because of the way the address is encoded into + * offset. + */ + if (md->pfn <= 0x100000) { + while ((virt & ~SUPERSECTION_MASK || + (virt + off) & ~SUPERSECTION_MASK) && + length >= (PGDIR_SIZE / 2)) { + alloc_init_section(virt, virt + off, prot_sect); + + virt += (PGDIR_SIZE / 2); + length -= (PGDIR_SIZE / 2); + } + } + + while (length >= SUPERSECTION_SIZE) { + alloc_init_supersection(virt, virt + off, prot_sect); + + virt += SUPERSECTION_SIZE; + length -= SUPERSECTION_SIZE; + } + } + + /* + * A section mapping covers half a "pgdir" entry. + */ + while (length >= (PGDIR_SIZE / 2)) { + alloc_init_section(virt, virt + off, prot_sect); + + virt += (PGDIR_SIZE / 2); + length -= (PGDIR_SIZE / 2); + } + + while (length >= PAGE_SIZE) { + alloc_init_page(virt, virt + off, prot_l1, prot_pte); + + virt += PAGE_SIZE; + length -= PAGE_SIZE; + } +} + +/* + * Create the architecture specific mappings + */ +void __init iotable_init(struct map_desc *io_desc, int nr) +{ + int i; + + for (i = 0; i < nr; i++) + create_mapping(io_desc + i); +} + +static inline void prepare_page_table(struct meminfo *mi) +{ + unsigned long addr; + + /* + * Clear out all the mappings below the kernel image. + */ + for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); + +#ifdef CONFIG_XIP_KERNEL + /* The XIP kernel is mapped in the module area -- skip over it */ + addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK; +#endif + for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); + + /* + * Clear out all the kernel space mappings, except for the first + * memory bank, up to the end of the vmalloc region. + */ + for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size); + addr < VMALLOC_END; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); +} + +/* + * Reserve the various regions of node 0 + */ +void __init reserve_node_zero(pg_data_t *pgdat) +{ + unsigned long res_size = 0; + + /* + * Register the kernel text and data with bootmem. + * Note that this can only be in node 0. + */ +#ifdef CONFIG_XIP_KERNEL + reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start); +#else + reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext); +#endif + + /* + * Reserve the page tables. These are already in use, + * and can only be in node 0. + */ + reserve_bootmem_node(pgdat, __pa(swapper_pg_dir), + PTRS_PER_PGD * sizeof(pgd_t)); + + /* + * Hmm... This should go elsewhere, but we really really need to + * stop things allocating the low memory; ideally we need a better + * implementation of GFP_DMA which does not assume that DMA-able + * memory starts at zero. + */ + if (machine_is_integrator() || machine_is_cintegrator()) + res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; + + /* + * These should likewise go elsewhere. They pre-reserve the + * screen memory region at the start of main system memory. + */ + if (machine_is_edb7211()) + res_size = 0x00020000; + if (machine_is_p720t()) + res_size = 0x00014000; + +#ifdef CONFIG_SA1111 + /* + * Because of the SA1111 DMA bug, we want to preserve our + * precious DMA-able memory... + */ + res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; +#endif + if (res_size) + reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size); +} + +/* + * Set up device the mappings. Since we clear out the page tables for all + * mappings above VMALLOC_END, we will remove any debug device mappings. + * This means you have to be careful how you debug this function, or any + * called function. This means you can't use any function or debugging + * method which may touch any device, otherwise the kernel _will_ crash. + */ +static void __init devicemaps_init(struct machine_desc *mdesc) +{ + struct map_desc map; + unsigned long addr; + void *vectors; + + /* + * Allocate the vector page early. + */ + vectors = alloc_bootmem_low_pages(PAGE_SIZE); + BUG_ON(!vectors); + + for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); + + /* + * Map the kernel if it is XIP. + * It is always first in the modulearea. + */ +#ifdef CONFIG_XIP_KERNEL + map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK); + map.virtual = MODULE_START; + map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK; + map.type = MT_ROM; + create_mapping(&map); +#endif + + /* + * Map the cache flushing regions. + */ +#ifdef FLUSH_BASE + map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS); + map.virtual = FLUSH_BASE; + map.length = SZ_1M; + map.type = MT_CACHECLEAN; + create_mapping(&map); +#endif +#ifdef FLUSH_BASE_MINICACHE + map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M); + map.virtual = FLUSH_BASE_MINICACHE; + map.length = SZ_1M; + map.type = MT_MINICLEAN; + create_mapping(&map); +#endif + + /* + * Create a mapping for the machine vectors at the high-vectors + * location (0xffff0000). If we aren't using high-vectors, also + * create a mapping at the low-vectors virtual address. + */ + map.pfn = __phys_to_pfn(virt_to_phys(vectors)); + map.virtual = 0xffff0000; + map.length = PAGE_SIZE; + map.type = MT_HIGH_VECTORS; + create_mapping(&map); + + if (!vectors_high()) { + map.virtual = 0; + map.type = MT_LOW_VECTORS; + create_mapping(&map); + } + + /* + * Ask the machine support to map in the statically mapped devices. + */ + if (mdesc->map_io) + mdesc->map_io(); + + /* + * Finally flush the caches and tlb to ensure that we're in a + * consistent state wrt the writebuffer. This also ensures that + * any write-allocated cache lines in the vector page are written + * back. After this point, we can start to touch devices again. + */ + local_flush_tlb_all(); + flush_cache_all(); +} + +/* + * paging_init() sets up the page tables, initialises the zone memory + * maps, and sets up the zero page, bad page and bad page tables. + */ +void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) +{ + void *zero_page; + + build_mem_type_table(); + prepare_page_table(mi); + bootmem_init(mi); + devicemaps_init(mdesc); + + top_pmd = pmd_off_k(0xffff0000); + + /* + * allocate the zero page. Note that we count on this going ok. + */ + zero_page = alloc_bootmem_low_pages(PAGE_SIZE); + memzero(zero_page, PAGE_SIZE); + empty_zero_page = virt_to_page(zero_page); + flush_dcache_page(empty_zero_page); +} + +/* + * In order to soft-boot, we need to insert a 1:1 mapping in place of + * the user-mode pages. This will then ensure that we have predictable + * results when turning the mmu off + */ +void setup_mm_for_reboot(char mode) +{ + unsigned long base_pmdval; + pgd_t *pgd; + int i; + + if (current->mm && current->mm->pgd) + pgd = current->mm->pgd; + else + pgd = init_mm.pgd; + + base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT; + if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) + base_pmdval |= PMD_BIT4; + + for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) { + unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval; + pmd_t *pmd; - mm->context.id = asid; + pmd = pmd_off(pgd, i << PGDIR_SHIFT); + pmd[0] = __pmd(pmdval); + pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1))); + flush_pmd_entry(pmd); + } } diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 1464ed817b5..d0e66424a59 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -11,6 +11,49 @@ #include <asm/io.h> #include <asm/page.h> +#include "mm.h" + +extern void _stext, __data_start, _end; + +/* + * Reserve the various regions of node 0 + */ +void __init reserve_node_zero(pg_data_t *pgdat) +{ + /* + * Register the kernel text and data with bootmem. + * Note that this can only be in node 0. + */ +#ifdef CONFIG_XIP_KERNEL + reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start); +#else + reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext); +#endif + + /* + * Register the exception vector page. + * some architectures which the DRAM is the exception vector to trap, + * alloc_page breaks with error, although it is not NULL, but "0." + */ + reserve_bootmem_node(pgdat, CONFIG_VECTORS_BASE, PAGE_SIZE); +} + +/* + * paging_init() sets up the page tables, initialises the zone memory + * maps, and sets up the zero page, bad page and bad page tables. + */ +void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) +{ + bootmem_init(mi); +} + +/* + * We don't need to do anything here for nommu machines. + */ +void setup_mm_for_reboot(char mode) +{ +} + void flush_dcache_page(struct page *page) { __cpuc_flush_dcache_page(page_address(page)); diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c new file mode 100644 index 00000000000..20c1b0df75f --- /dev/null +++ b/arch/arm/mm/pgd.c @@ -0,0 +1,101 @@ +/* + * linux/arch/arm/mm/pgd.c + * + * Copyright (C) 1998-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/mm.h> +#include <linux/highmem.h> + +#include <asm/pgalloc.h> +#include <asm/page.h> +#include <asm/tlbflush.h> + +#include "mm.h" + +#define FIRST_KERNEL_PGD_NR (FIRST_USER_PGD_NR + USER_PTRS_PER_PGD) + +/* + * need to get a 16k page for level 1 + */ +pgd_t *get_pgd_slow(struct mm_struct *mm) +{ + pgd_t *new_pgd, *init_pgd; + pmd_t *new_pmd, *init_pmd; + pte_t *new_pte, *init_pte; + + new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2); + if (!new_pgd) + goto no_pgd; + + memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t)); + + /* + * Copy over the kernel and IO PGD entries + */ + init_pgd = pgd_offset_k(0); + memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR, + (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t)); + + clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t)); + + if (!vectors_high()) { + /* + * On ARM, first page must always be allocated since it + * contains the machine vectors. + */ + new_pmd = pmd_alloc(mm, new_pgd, 0); + if (!new_pmd) + goto no_pmd; + + new_pte = pte_alloc_map(mm, new_pmd, 0); + if (!new_pte) + goto no_pte; + + init_pmd = pmd_offset(init_pgd, 0); + init_pte = pte_offset_map_nested(init_pmd, 0); + set_pte(new_pte, *init_pte); + pte_unmap_nested(init_pte); + pte_unmap(new_pte); + } + + return new_pgd; + +no_pte: + pmd_free(new_pmd); +no_pmd: + free_pages((unsigned long)new_pgd, 2); +no_pgd: + return NULL; +} + +void free_pgd_slow(pgd_t *pgd) +{ + pmd_t *pmd; + struct page *pte; + + if (!pgd) + return; + + /* pgd is always present and good */ + pmd = pmd_off(pgd, 0); + if (pmd_none(*pmd)) + goto free; + if (pmd_bad(*pmd)) { + pmd_ERROR(*pmd); + pmd_clear(pmd); + goto free; + } + + pte = pmd_page(*pmd); + pmd_clear(pmd); + dec_zone_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE); + pte_lock_deinit(pte); + pte_free(pte); + pmd_free(pmd); +free: + free_pages((unsigned long) pgd, 2); +} diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S new file mode 100644 index 00000000000..40713818a87 --- /dev/null +++ b/arch/arm/mm/proc-arm740.S @@ -0,0 +1,174 @@ +/* + * linux/arch/arm/mm/arm740.S: utility functions for ARM740 + * + * Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/asm-offsets.h> +#include <asm/pgtable-hwdef.h> +#include <asm/pgtable.h> +#include <asm/procinfo.h> +#include <asm/ptrace.h> + + .text +/* + * cpu_arm740_proc_init() + * cpu_arm740_do_idle() + * cpu_arm740_dcache_clean_area() + * cpu_arm740_switch_mm() + * + * These are not required. + */ +ENTRY(cpu_arm740_proc_init) +ENTRY(cpu_arm740_do_idle) +ENTRY(cpu_arm740_dcache_clean_area) +ENTRY(cpu_arm740_switch_mm) + mov pc, lr + +/* + * cpu_arm740_proc_fin() + */ +ENTRY(cpu_arm740_proc_fin) + stmfd sp!, {lr} + mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, ip + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #0x3f000000 @ bank/f/lock/s + bic r0, r0, #0x0000000c @ w-buffer/cache + mcr p15, 0, r0, c1, c0, 0 @ disable caches + mcr p15, 0, r0, c7, c0, 0 @ invalidate cache + ldmfd sp!, {pc} + +/* + * cpu_arm740_reset(loc) + * Params : r0 = address to jump to + * Notes : This sets up everything for a reset + */ +ENTRY(cpu_arm740_reset) + mov ip, #0 + mcr p15, 0, ip, c7, c0, 0 @ invalidate cache + mrc p15, 0, ip, c1, c0, 0 @ get ctrl register + bic ip, ip, #0x0000000c @ ............wc.. + mcr p15, 0, ip, c1, c0, 0 @ ctrl register + mov pc, r0 + + __INIT + + .type __arm740_setup, #function +__arm740_setup: + mov r0, #0 + mcr p15, 0, r0, c7, c0, 0 @ invalidate caches + + mcr p15, 0, r0, c6, c3 @ disable area 3~7 + mcr p15, 0, r0, c6, c4 + mcr p15, 0, r0, c6, c5 + mcr p15, 0, r0, c6, c6 + mcr p15, 0, r0, c6, c7 + + mov r0, #0x0000003F @ base = 0, size = 4GB + mcr p15, 0, r0, c6, c0 @ set area 0, default + + ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM + ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB) + mov r2, #10 @ 11 is the minimum (4KB) +1: add r2, r2, #1 @ area size *= 2 + mov r1, r1, lsr #1 + bne 1b @ count not zero r-shift + orr r0, r0, r2, lsl #1 @ the area register value + orr r0, r0, #1 @ set enable bit + mcr p15, 0, r0, c6, c1 @ set area 1, RAM + + ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH + ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB) + mov r2, #10 @ 11 is the minimum (4KB) +1: add r2, r2, #1 @ area size *= 2 + mov r1, r1, lsr #1 + bne 1b @ count not zero r-shift + orr r0, r0, r2, lsl #1 @ the area register value + orr r0, r0, #1 @ set enable bit + mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH + + mov r0, #0x06 + mcr p15, 0, r0, c2, c0 @ Region 1&2 cacheable +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mov r0, #0x00 @ disable whole write buffer +#else + mov r0, #0x02 @ Region 1 write bufferred +#endif + mcr p15, 0, r0, c3, c0 + + mov r0, #0x10000 + sub r0, r0, #1 @ r0 = 0xffff + mcr p15, 0, r0, c5, c0 @ all read/write access + + mrc p15, 0, r0, c1, c0 @ get control register + bic r0, r0, #0x3F000000 @ set to standard caching mode + @ need some benchmark + orr r0, r0, #0x0000000d @ MPU/Cache/WB + + mov pc, lr + + .size __arm740_setup, . - __arm740_setup + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type arm740_processor_functions, #object +ENTRY(arm740_processor_functions) + .word v4t_late_abort + .word cpu_arm740_proc_init + .word cpu_arm740_proc_fin + .word cpu_arm740_reset + .word cpu_arm740_do_idle + .word cpu_arm740_dcache_clean_area + .word cpu_arm740_switch_mm + .word 0 @ cpu_*_set_pte + .size arm740_processor_functions, . - arm740_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv4" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v4" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_arm740_name, #object +cpu_arm740_name: + .ascii "ARM740T" + .size cpu_arm740_name, . - cpu_arm740_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + .type __arm740_proc_info,#object +__arm740_proc_info: + .long 0x41807400 + .long 0xfffffff0 + .long 0 + b __arm740_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT + .long cpu_arm740_name + .long arm740_processor_functions + .long 0 + .long 0 + .long v3_cache_fns @ cache model + .size __arm740_proc_info, . - __arm740_proc_info + + diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S new file mode 100644 index 00000000000..22d7e3100ea --- /dev/null +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -0,0 +1,249 @@ +/* + * linux/arch/arm/mm/proc-arm7tdmi.S: utility functions for ARM7TDMI + * + * Copyright (C) 2003-2006 Hyok S. Choi <hyok.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/asm-offsets.h> +#include <asm/pgtable-hwdef.h> +#include <asm/pgtable.h> +#include <asm/procinfo.h> +#include <asm/ptrace.h> + + .text +/* + * cpu_arm7tdmi_proc_init() + * cpu_arm7tdmi_do_idle() + * cpu_arm7tdmi_dcache_clean_area() + * cpu_arm7tdmi_switch_mm() + * + * These are not required. + */ +ENTRY(cpu_arm7tdmi_proc_init) +ENTRY(cpu_arm7tdmi_do_idle) +ENTRY(cpu_arm7tdmi_dcache_clean_area) +ENTRY(cpu_arm7tdmi_switch_mm) + mov pc, lr + +/* + * cpu_arm7tdmi_proc_fin() + */ +ENTRY(cpu_arm7tdmi_proc_fin) + mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, r0 + mov pc, lr + +/* + * Function: cpu_arm7tdmi_reset(loc) + * Params : loc(r0) address to jump to + * Purpose : Sets up everything for a reset and jump to the location for soft reset. + */ +ENTRY(cpu_arm7tdmi_reset) + mov pc, r0 + + __INIT + + .type __arm7tdmi_setup, #function +__arm7tdmi_setup: + mov pc, lr + .size __arm7tdmi_setup, . - __arm7tdmi_setup + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type arm7tdmi_processor_functions, #object +ENTRY(arm7tdmi_processor_functions) + .word v4t_late_abort + .word cpu_arm7tdmi_proc_init + .word cpu_arm7tdmi_proc_fin + .word cpu_arm7tdmi_reset + .word cpu_arm7tdmi_do_idle + .word cpu_arm7tdmi_dcache_clean_area + .word cpu_arm7tdmi_switch_mm + .word 0 @ cpu_*_set_pte + .size arm7tdmi_processor_functions, . - arm7tdmi_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv4t" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v4" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_arm7tdmi_name, #object +cpu_arm7tdmi_name: + .asciz "ARM7TDMI" + .size cpu_arm7tdmi_name, . - cpu_arm7tdmi_name + + .type cpu_triscenda7_name, #object +cpu_triscenda7_name: + .asciz "Triscend-A7x" + .size cpu_triscenda7_name, . - cpu_triscenda7_name + + .type cpu_at91_name, #object +cpu_at91_name: + .asciz "Atmel-AT91M40xxx" + .size cpu_at91_name, . - cpu_at91_name + + .type cpu_s3c3410_name, #object +cpu_s3c3410_name: + .asciz "Samsung-S3C3410" + .size cpu_s3c3410_name, . - cpu_s3c3410_name + + .type cpu_s3c44b0x_name, #object +cpu_s3c44b0x_name: + .asciz "Samsung-S3C44B0x" + .size cpu_s3c44b0x_name, . - cpu_s3c44b0x_name + + .type cpu_s3c4510b, #object +cpu_s3c4510b_name: + .asciz "Samsung-S3C4510B" + .size cpu_s3c4510b_name, . - cpu_s3c4510b_name + + .type cpu_s3c4530_name, #object +cpu_s3c4530_name: + .asciz "Samsung-S3C4530" + .size cpu_s3c4530_name, . - cpu_s3c4530_name + + .type cpu_netarm_name, #object +cpu_netarm_name: + .asciz "NETARM" + .size cpu_netarm_name, . - cpu_netarm_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + + .type __arm7tdmi_proc_info, #object +__arm7tdmi_proc_info: + .long 0x41007700 + .long 0xfff8ff00 + .long 0 + .long 0 + b __arm7tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_26BIT + .long cpu_arm7tdmi_name + .long arm7tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __arm7tdmi_proc_info, . - __arm7dmi_proc_info + + .type __triscenda7_proc_info, #object +__triscenda7_proc_info: + .long 0x0001d2ff + .long 0x0001ffff + .long 0 + .long 0 + b __arm7tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_triscenda7_name + .long arm7tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __triscenda7_proc_info, . - __triscenda7_proc_info + + .type __at91_proc_info, #object +__at91_proc_info: + .long 0x14000040 + .long 0xfff000e0 + .long 0 + .long 0 + b __arm7tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_at91_name + .long arm7tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __at91_proc_info, . - __at91_proc_info + + .type __s3c4510b_proc_info, #object +__s3c4510b_proc_info: + .long 0x36365000 + .long 0xfffff000 + .long 0 + .long 0 + b __arm7tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_s3c4510b_name + .long arm7tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __s3c4510b_proc_info, . - __s3c4510b_proc_info + + .type __s3c4530_proc_info, #object +__s3c4530_proc_info: + .long 0x4c000000 + .long 0xfff000e0 + .long 0 + .long 0 + b __arm7tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_s3c4530_name + .long arm7tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __s3c4530_proc_info, . - __s3c4530_proc_info + + .type __s3c3410_proc_info, #object +__s3c3410_proc_info: + .long 0x34100000 + .long 0xffff0000 + .long 0 + .long 0 + b __arm7tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_s3c3410_name + .long arm7tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __s3c3410_proc_info, . - __s3c3410_proc_info + + .type __s3c44b0x_proc_info, #object +__s3c44b0x_proc_info: + .long 0x44b00000 + .long 0xffff0000 + .long 0 + .long 0 + b __arm7tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_s3c44b0x_name + .long arm7tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __s3c44b0x_proc_info, . - __s3c44b0x_proc_info diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S new file mode 100644 index 00000000000..2397f4b6e15 --- /dev/null +++ b/arch/arm/mm/proc-arm940.S @@ -0,0 +1,369 @@ +/* + * linux/arch/arm/mm/arm940.S: utility functions for ARM940T + * + * Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/pgtable-hwdef.h> +#include <asm/pgtable.h> +#include <asm/procinfo.h> +#include <asm/ptrace.h> + +/* ARM940T has a 4KB DCache comprising 256 lines of 4 words */ +#define CACHE_DLINESIZE 16 +#define CACHE_DSEGMENTS 4 +#define CACHE_DENTRIES 64 + + .text +/* + * cpu_arm940_proc_init() + * cpu_arm940_switch_mm() + * + * These are not required. + */ +ENTRY(cpu_arm940_proc_init) +ENTRY(cpu_arm940_switch_mm) + mov pc, lr + +/* + * cpu_arm940_proc_fin() + */ +ENTRY(cpu_arm940_proc_fin) + stmfd sp!, {lr} + mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, ip + bl arm940_flush_kern_cache_all + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x00001000 @ i-cache + bic r0, r0, #0x00000004 @ d-cache + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ldmfd sp!, {pc} + +/* + * cpu_arm940_reset(loc) + * Params : r0 = address to jump to + * Notes : This sets up everything for a reset + */ +ENTRY(cpu_arm940_reset) + mov ip, #0 + mcr p15, 0, ip, c7, c5, 0 @ flush I cache + mcr p15, 0, ip, c7, c6, 0 @ flush D cache + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mrc p15, 0, ip, c1, c0, 0 @ ctrl register + bic ip, ip, #0x00000005 @ .............c.p + bic ip, ip, #0x00001000 @ i-cache + mcr p15, 0, ip, c1, c0, 0 @ ctrl register + mov pc, r0 + +/* + * cpu_arm940_do_idle() + */ + .align 5 +ENTRY(cpu_arm940_do_idle) + mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt + mov pc, lr + +/* + * flush_user_cache_all() + */ +ENTRY(arm940_flush_user_cache_all) + /* FALLTHROUGH */ + +/* + * flush_kern_cache_all() + * + * Clean and invalidate the entire cache. + */ +ENTRY(arm940_flush_kern_cache_all) + mov r2, #VM_EXEC + /* FALLTHROUGH */ + +/* + * flush_user_cache_range(start, end, flags) + * + * There is no efficient way to flush a range of cache entries + * in the specified address range. Thus, flushes all. + * + * - start - start address (inclusive) + * - end - end address (exclusive) + * - flags - vm_flags describing address space + */ +ENTRY(arm940_flush_user_cache_range) + mov ip, #0 +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, ip, c7, c6, 0 @ flush D cache +#else + mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments +1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries +2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index + subs r3, r3, #1 << 26 + bcs 2b @ entries 63 to 0 + subs r1, r1, #1 << 4 + bcs 1b @ segments 3 to 0 +#endif + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcrne p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm940_coherent_kern_range) + /* FALLTHROUGH */ + +/* + * coherent_user_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm940_coherent_user_range) + /* FALLTHROUGH */ + +/* + * flush_kern_dcache_page(void *page) + * + * Ensure no D cache aliasing occurs, either with itself or + * the I cache + * + * - addr - page aligned address + */ +ENTRY(arm940_flush_kern_dcache_page) + mov ip, #0 + mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments +1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries +2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index + subs r3, r3, #1 << 26 + bcs 2b @ entries 63 to 0 + subs r1, r1, #1 << 4 + bcs 1b @ segments 7 to 0 + mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_inv_range(start, end) + * + * There is no efficient way to invalidate a specifid virtual + * address range. Thus, invalidates all. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm940_dma_inv_range) + mov ip, #0 + mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments +1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries +2: mcr p15, 0, r3, c7, c6, 2 @ flush D entry + subs r3, r3, #1 << 26 + bcs 2b @ entries 63 to 0 + subs r1, r1, #1 << 4 + bcs 1b @ segments 7 to 0 + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_clean_range(start, end) + * + * There is no efficient way to clean a specifid virtual + * address range. Thus, cleans all. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm940_dma_clean_range) +ENTRY(cpu_arm940_dcache_clean_area) + mov ip, #0 +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments +1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries +2: mcr p15, 0, r3, c7, c10, 2 @ clean D entry + subs r3, r3, #1 << 26 + bcs 2b @ entries 63 to 0 + subs r1, r1, #1 << 4 + bcs 1b @ segments 7 to 0 +#endif + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_flush_range(start, end) + * + * There is no efficient way to clean and invalidate a specifid + * virtual address range. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm940_dma_flush_range) + mov ip, #0 + mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments +1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries +2: +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, r3, c7, c14, 2 @ clean/flush D entry +#else + mcr p15, 0, r3, c7, c10, 2 @ clean D entry +#endif + subs r3, r3, #1 << 26 + bcs 2b @ entries 63 to 0 + subs r1, r1, #1 << 4 + bcs 1b @ segments 7 to 0 + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +ENTRY(arm940_cache_fns) + .long arm940_flush_kern_cache_all + .long arm940_flush_user_cache_all + .long arm940_flush_user_cache_range + .long arm940_coherent_kern_range + .long arm940_coherent_user_range + .long arm940_flush_kern_dcache_page + .long arm940_dma_inv_range + .long arm940_dma_clean_range + .long arm940_dma_flush_range + + __INIT + + .type __arm940_setup, #function +__arm940_setup: + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 0, r0, c7, c6, 0 @ invalidate D cache + mcr p15, 0, r0, c7, c10, 4 @ drain WB + + mcr p15, 0, r0, c6, c3, 0 @ disable data area 3~7 + mcr p15, 0, r0, c6, c4, 0 + mcr p15, 0, r0, c6, c5, 0 + mcr p15, 0, r0, c6, c6, 0 + mcr p15, 0, r0, c6, c7, 0 + + mcr p15, 0, r0, c6, c3, 1 @ disable instruction area 3~7 + mcr p15, 0, r0, c6, c4, 1 + mcr p15, 0, r0, c6, c5, 1 + mcr p15, 0, r0, c6, c6, 1 + mcr p15, 0, r0, c6, c7, 1 + + mov r0, #0x0000003F @ base = 0, size = 4GB + mcr p15, 0, r0, c6, c0, 0 @ set area 0, default + mcr p15, 0, r0, c6, c0, 1 + + ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM + ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB) + mov r2, #10 @ 11 is the minimum (4KB) +1: add r2, r2, #1 @ area size *= 2 + mov r1, r1, lsr #1 + bne 1b @ count not zero r-shift + orr r0, r0, r2, lsl #1 @ the area register value + orr r0, r0, #1 @ set enable bit + mcr p15, 0, r0, c6, c1, 0 @ set area 1, RAM + mcr p15, 0, r0, c6, c1, 1 + + ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH + ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB) + mov r2, #10 @ 11 is the minimum (4KB) +1: add r2, r2, #1 @ area size *= 2 + mov r1, r1, lsr #1 + bne 1b @ count not zero r-shift + orr r0, r0, r2, lsl #1 @ the area register value + orr r0, r0, #1 @ set enable bit + mcr p15, 0, r0, c6, c2, 0 @ set area 2, ROM/FLASH + mcr p15, 0, r0, c6, c2, 1 + + mov r0, #0x06 + mcr p15, 0, r0, c2, c0, 0 @ Region 1&2 cacheable + mcr p15, 0, r0, c2, c0, 1 +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mov r0, #0x00 @ disable whole write buffer +#else + mov r0, #0x02 @ Region 1 write bufferred +#endif + mcr p15, 0, r0, c3, c0, 0 + + mov r0, #0x10000 + sub r0, r0, #1 @ r0 = 0xffff + mcr p15, 0, r0, c5, c0, 0 @ all read/write access + mcr p15, 0, r0, c5, c0, 1 + + mrc p15, 0, r0, c1, c0 @ get control register + orr r0, r0, #0x00001000 @ I-cache + orr r0, r0, #0x00000005 @ MPU/D-cache + + mov pc, lr + + .size __arm940_setup, . - __arm940_setup + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type arm940_processor_functions, #object +ENTRY(arm940_processor_functions) + .word nommu_early_abort + .word cpu_arm940_proc_init + .word cpu_arm940_proc_fin + .word cpu_arm940_reset + .word cpu_arm940_do_idle + .word cpu_arm940_dcache_clean_area + .word cpu_arm940_switch_mm + .word 0 @ cpu_*_set_pte + .size arm940_processor_functions, . - arm940_processor_functions + + .section ".rodata" + +.type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv4t" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v4" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_arm940_name, #object +cpu_arm940_name: + .ascii "ARM940T" + .size cpu_arm940_name, . - cpu_arm940_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + + .type __arm940_proc_info,#object +__arm940_proc_info: + .long 0x41009400 + .long 0xff00fff0 + .long 0 + b __arm940_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB + .long cpu_arm940_name + .long arm940_processor_functions + .long 0 + .long 0 + .long arm940_cache_fns + .size __arm940_proc_info, . - __arm940_proc_info + diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S new file mode 100644 index 00000000000..e1861756442 --- /dev/null +++ b/arch/arm/mm/proc-arm946.S @@ -0,0 +1,424 @@ +/* + * linux/arch/arm/mm/arm946.S: utility functions for ARM946E-S + * + * Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com) + * + * (Many of cache codes are from proc-arm926.S) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/pgtable-hwdef.h> +#include <asm/pgtable.h> +#include <asm/procinfo.h> +#include <asm/ptrace.h> + +/* + * ARM946E-S is synthesizable to have 0KB to 1MB sized D-Cache, + * comprising 256 lines of 32 bytes (8 words). + */ +#define CACHE_DSIZE (CONFIG_CPU_DCACHE_SIZE) /* typically 8KB. */ +#define CACHE_DLINESIZE 32 /* fixed */ +#define CACHE_DSEGMENTS 4 /* fixed */ +#define CACHE_DENTRIES (CACHE_DSIZE / CACHE_DSEGMENTS / CACHE_DLINESIZE) +#define CACHE_DLIMIT (CACHE_DSIZE * 4) /* benchmark needed */ + + .text +/* + * cpu_arm946_proc_init() + * cpu_arm946_switch_mm() + * + * These are not required. + */ +ENTRY(cpu_arm946_proc_init) +ENTRY(cpu_arm946_switch_mm) + mov pc, lr + +/* + * cpu_arm946_proc_fin() + */ +ENTRY(cpu_arm946_proc_fin) + stmfd sp!, {lr} + mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, ip + bl arm946_flush_kern_cache_all + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x00001000 @ i-cache + bic r0, r0, #0x00000004 @ d-cache + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ldmfd sp!, {pc} + +/* + * cpu_arm946_reset(loc) + * Params : r0 = address to jump to + * Notes : This sets up everything for a reset + */ +ENTRY(cpu_arm946_reset) + mov ip, #0 + mcr p15, 0, ip, c7, c5, 0 @ flush I cache + mcr p15, 0, ip, c7, c6, 0 @ flush D cache + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mrc p15, 0, ip, c1, c0, 0 @ ctrl register + bic ip, ip, #0x00000005 @ .............c.p + bic ip, ip, #0x00001000 @ i-cache + mcr p15, 0, ip, c1, c0, 0 @ ctrl register + mov pc, r0 + +/* + * cpu_arm946_do_idle() + */ + .align 5 +ENTRY(cpu_arm946_do_idle) + mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt + mov pc, lr + +/* + * flush_user_cache_all() + */ +ENTRY(arm946_flush_user_cache_all) + /* FALLTHROUGH */ + +/* + * flush_kern_cache_all() + * + * Clean and invalidate the entire cache. + */ +ENTRY(arm946_flush_kern_cache_all) + mov r2, #VM_EXEC + mov ip, #0 +__flush_whole_cache: +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, ip, c7, c6, 0 @ flush D cache +#else + mov r1, #(CACHE_DSEGMENTS - 1) << 29 @ 4 segments +1: orr r3, r1, #(CACHE_DENTRIES - 1) << 4 @ n entries +2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index + subs r3, r3, #1 << 4 + bcs 2b @ entries n to 0 + subs r1, r1, #1 << 29 + bcs 1b @ segments 3 to 0 +#endif + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 0 @ flush I cache + mcrne p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * flush_user_cache_range(start, end, flags) + * + * Clean and invalidate a range of cache entries in the + * specified address range. + * + * - start - start address (inclusive) + * - end - end address (exclusive) + * - flags - vm_flags describing address space + * (same as arm926) + */ +ENTRY(arm946_flush_user_cache_range) + mov ip, #0 + sub r3, r1, r0 @ calculate total size + cmp r3, #CACHE_DLIMIT + bhs __flush_whole_cache + +1: tst r2, #VM_EXEC +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE +#else + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE +#endif + cmp r0, r1 + blo 1b + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm946_coherent_kern_range) + /* FALLTHROUGH */ + +/* + * coherent_user_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + * (same as arm926) + */ +ENTRY(arm946_coherent_user_range) + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * flush_kern_dcache_page(void *page) + * + * Ensure no D cache aliasing occurs, either with itself or + * the I cache + * + * - addr - page aligned address + * (same as arm926) + */ +ENTRY(arm946_flush_kern_dcache_page) + add r1, r0, #PAGE_SZ +1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_inv_range(start, end) + * + * Invalidate (discard) the specified virtual address range. + * May not write back any entries. If 'start' or 'end' + * are not cache line aligned, those lines must be written + * back. + * + * - start - virtual start address + * - end - virtual end address + * (same as arm926) + */ +ENTRY(arm946_dma_inv_range) +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + tst r0, #CACHE_DLINESIZE - 1 + mcrne p15, 0, r0, c7, c10, 1 @ clean D entry + tst r1, #CACHE_DLINESIZE - 1 + mcrne p15, 0, r1, c7, c10, 1 @ clean D entry +#endif + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_clean_range(start, end) + * + * Clean the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + * + * (same as arm926) + */ +ENTRY(arm946_dma_clean_range) +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b +#endif + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_flush_range(start, end) + * + * Clean and invalidate the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + * + * (same as arm926) + */ +ENTRY(arm946_dma_flush_range) + bic r0, r0, #CACHE_DLINESIZE - 1 +1: +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry +#else + mcr p15, 0, r0, c7, c10, 1 @ clean D entry +#endif + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +ENTRY(arm946_cache_fns) + .long arm946_flush_kern_cache_all + .long arm946_flush_user_cache_all + .long arm946_flush_user_cache_range + .long arm946_coherent_kern_range + .long arm946_coherent_user_range + .long arm946_flush_kern_dcache_page + .long arm946_dma_inv_range + .long arm946_dma_clean_range + .long arm946_dma_flush_range + + +ENTRY(cpu_arm946_dcache_clean_area) +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHE_DLINESIZE + subs r1, r1, #CACHE_DLINESIZE + bhi 1b +#endif + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + + __INIT + + .type __arm946_setup, #function +__arm946_setup: + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 0, r0, c7, c6, 0 @ invalidate D cache + mcr p15, 0, r0, c7, c10, 4 @ drain WB + + mcr p15, 0, r0, c6, c3, 0 @ disable memory region 3~7 + mcr p15, 0, r0, c6, c4, 0 + mcr p15, 0, r0, c6, c5, 0 + mcr p15, 0, r0, c6, c6, 0 + mcr p15, 0, r0, c6, c7, 0 + + mov r0, #0x0000003F @ base = 0, size = 4GB + mcr p15, 0, r0, c6, c0, 0 @ set region 0, default + + ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM + ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB) + mov r2, #10 @ 11 is the minimum (4KB) +1: add r2, r2, #1 @ area size *= 2 + mov r1, r1, lsr #1 + bne 1b @ count not zero r-shift + orr r0, r0, r2, lsl #1 @ the region register value + orr r0, r0, #1 @ set enable bit + mcr p15, 0, r0, c6, c1, 0 @ set region 1, RAM + + ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH + ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB) + mov r2, #10 @ 11 is the minimum (4KB) +1: add r2, r2, #1 @ area size *= 2 + mov r1, r1, lsr #1 + bne 1b @ count not zero r-shift + orr r0, r0, r2, lsl #1 @ the region register value + orr r0, r0, #1 @ set enable bit + mcr p15, 0, r0, c6, c2, 0 @ set region 2, ROM/FLASH + + mov r0, #0x06 + mcr p15, 0, r0, c2, c0, 0 @ region 1,2 d-cacheable + mcr p15, 0, r0, c2, c0, 1 @ region 1,2 i-cacheable +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mov r0, #0x00 @ disable whole write buffer +#else + mov r0, #0x02 @ region 1 write bufferred +#endif + mcr p15, 0, r0, c3, c0, 0 + +/* + * Access Permission Settings for future permission control by PU. + * + * priv. user + * region 0 (whole) rw -- : b0001 + * region 1 (RAM) rw rw : b0011 + * region 2 (FLASH) rw r- : b0010 + * region 3~7 (none) -- -- : b0000 + */ + mov r0, #0x00000031 + orr r0, r0, #0x00000200 + mcr p15, 0, r0, c5, c0, 2 @ set data access permission + mcr p15, 0, r0, c5, c0, 3 @ set inst. access permission + + mrc p15, 0, r0, c1, c0 @ get control register + orr r0, r0, #0x00001000 @ I-cache + orr r0, r0, #0x00000005 @ MPU/D-cache +#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN + orr r0, r0, #0x00004000 @ .1.. .... .... .... +#endif + mov pc, lr + + .size __arm946_setup, . - __arm946_setup + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type arm946_processor_functions, #object +ENTRY(arm946_processor_functions) + .word nommu_early_abort + .word cpu_arm946_proc_init + .word cpu_arm946_proc_fin + .word cpu_arm946_reset + .word cpu_arm946_do_idle + + .word cpu_arm946_dcache_clean_area + .word cpu_arm946_switch_mm + .word 0 @ cpu_*_set_pte + .size arm946_processor_functions, . - arm946_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv5te" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v5t" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_arm946_name, #object +cpu_arm946_name: + .ascii "ARM946E-S" + .size cpu_arm946_name, . - cpu_arm946_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + .type __arm946_proc_info,#object +__arm946_proc_info: + .long 0x41009460 + .long 0xff00fff0 + .long 0 + b __arm946_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB + .long cpu_arm946_name + .long arm946_processor_functions + .long 0 + .long 0 + .long arm940_cache_fns + .size __arm946_proc_info, . - __arm946_proc_info + diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S new file mode 100644 index 00000000000..918ebf65d4f --- /dev/null +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -0,0 +1,134 @@ +/* + * linux/arch/arm/mm/proc-arm9tdmi.S: utility functions for ARM9TDMI + * + * Copyright (C) 2003-2006 Hyok S. Choi <hyok.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/asm-offsets.h> +#include <asm/pgtable-hwdef.h> +#include <asm/pgtable.h> +#include <asm/procinfo.h> +#include <asm/ptrace.h> + + .text +/* + * cpu_arm9tdmi_proc_init() + * cpu_arm9tdmi_do_idle() + * cpu_arm9tdmi_dcache_clean_area() + * cpu_arm9tdmi_switch_mm() + * + * These are not required. + */ +ENTRY(cpu_arm9tdmi_proc_init) +ENTRY(cpu_arm9tdmi_do_idle) +ENTRY(cpu_arm9tdmi_dcache_clean_area) +ENTRY(cpu_arm9tdmi_switch_mm) + mov pc, lr + +/* + * cpu_arm9tdmi_proc_fin() + */ +ENTRY(cpu_arm9tdmi_proc_fin) + mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, r0 + mov pc, lr + +/* + * Function: cpu_arm9tdmi_reset(loc) + * Params : loc(r0) address to jump to + * Purpose : Sets up everything for a reset and jump to the location for soft reset. + */ +ENTRY(cpu_arm9tdmi_reset) + mov pc, r0 + + __INIT + + .type __arm9tdmi_setup, #function +__arm9tdmi_setup: + mov pc, lr + .size __arm9tdmi_setup, . - __arm9tdmi_setup + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type arm9tdmi_processor_functions, #object +ENTRY(arm9tdmi_processor_functions) + .word nommu_early_abort + .word cpu_arm9tdmi_proc_init + .word cpu_arm9tdmi_proc_fin + .word cpu_arm9tdmi_reset + .word cpu_arm9tdmi_do_idle + .word cpu_arm9tdmi_dcache_clean_area + .word cpu_arm9tdmi_switch_mm + .word 0 @ cpu_*_set_pte + .size arm9tdmi_processor_functions, . - arm9tdmi_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv4t" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v4" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_arm9tdmi_name, #object +cpu_arm9tdmi_name: + .asciz "ARM9TDMI" + .size cpu_arm9tdmi_name, . - cpu_arm9tdmi_name + + .type cpu_p2001_name, #object +cpu_p2001_name: + .asciz "P2001" + .size cpu_p2001_name, . - cpu_p2001_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + + .type __arm9tdmi_proc_info, #object +__arm9tdmi_proc_info: + .long 0x41009900 + .long 0xfff8ff00 + .long 0 + .long 0 + b __arm9tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_arm9tdmi_name + .long arm9tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __arm9tdmi_proc_info, . - __arm9dmi_proc_info + + .type __p2001_proc_info, #object +__p2001_proc_info: + .long 0x41029000 + .long 0xffffffff + .long 0 + .long 0 + b __arm9tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_p2001_name + .long arm9tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __p2001_proc_info, . - __p2001_proc_info diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 3ca0c92e98a..e8b377d637f 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -311,12 +311,6 @@ ENTRY(xscale_flush_kern_dcache_page) * - end - virtual end address */ ENTRY(xscale_dma_inv_range) - mrc p15, 0, r2, c0, c0, 0 @ read ID - eor r2, r2, #0x69000000 - eor r2, r2, #0x00052000 - bics r2, r2, #1 - beq xscale_dma_flush_range - tst r0, #CACHELINESIZE - 1 bic r0, r0, #CACHELINESIZE - 1 mcrne p15, 0, r0, c7, c10, 1 @ clean D entry @@ -375,6 +369,30 @@ ENTRY(xscale_cache_fns) .long xscale_dma_clean_range .long xscale_dma_flush_range +/* + * On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't + * clear the dirty bits, which means that if we invalidate a dirty line, + * the dirty data can still be written back to external memory later on. + * + * The recommended workaround is to always do a clean D-cache line before + * doing an invalidate D-cache line, so on the affected processors, + * dma_inv_range() is implemented as dma_flush_range(). + * + * See erratum #25 of "Intel 80200 Processor Specification Update", + * revision January 22, 2003, available at: + * http://www.intel.com/design/iio/specupdt/273415.htm + */ +ENTRY(xscale_80200_A0_A1_cache_fns) + .long xscale_flush_kern_cache_all + .long xscale_flush_user_cache_all + .long xscale_flush_user_cache_range + .long xscale_coherent_kern_range + .long xscale_coherent_user_range + .long xscale_flush_kern_dcache_page + .long xscale_dma_flush_range + .long xscale_dma_clean_range + .long xscale_dma_flush_range + ENTRY(cpu_xscale_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHELINESIZE @@ -531,6 +549,11 @@ cpu_elf_name: .asciz "v5" .size cpu_elf_name, . - cpu_elf_name + .type cpu_80200_A0_A1_name, #object +cpu_80200_A0_A1_name: + .asciz "XScale-80200 A0/A1" + .size cpu_80200_A0_A1_name, . - cpu_80200_A0_A1_name + .type cpu_80200_name, #object cpu_80200_name: .asciz "XScale-80200" @@ -595,6 +618,29 @@ cpu_pxa270_name: .section ".proc.info.init", #alloc, #execinstr + .type __80200_A0_A1_proc_info,#object +__80200_A0_A1_proc_info: + .long 0x69052000 + .long 0xfffffffe + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + .long PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __xscale_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_80200_name + .long xscale_processor_functions + .long v4wbi_tlb_fns + .long xscale_mc_user_fns + .long xscale_80200_A0_A1_cache_fns + .size __80200_A0_A1_proc_info, . - __80200_A0_A1_proc_info + .type __80200_proc_info,#object __80200_proc_info: .long 0x69052000 diff --git a/arch/arm/oprofile/op_model_xscale.c b/arch/arm/oprofile/op_model_xscale.c index 34fdc733743..6576143f255 100644 --- a/arch/arm/oprofile/op_model_xscale.c +++ b/arch/arm/oprofile/op_model_xscale.c @@ -36,11 +36,11 @@ #ifdef CONFIG_ARCH_IOP310 #define XSCALE_PMU_IRQ IRQ_XS80200_PMU #endif -#ifdef CONFIG_ARCH_IOP321 -#define XSCALE_PMU_IRQ IRQ_IOP321_CORE_PMU +#ifdef CONFIG_ARCH_IOP32X +#define XSCALE_PMU_IRQ IRQ_IOP32X_CORE_PMU #endif -#ifdef CONFIG_ARCH_IOP331 -#define XSCALE_PMU_IRQ IRQ_IOP331_CORE_PMU +#ifdef CONFIG_ARCH_IOP33X +#define XSCALE_PMU_IRQ IRQ_IOP33X_CORE_PMU #endif #ifdef CONFIG_ARCH_PXA #define XSCALE_PMU_IRQ IRQ_PMU @@ -88,7 +88,7 @@ static struct pmu_counter results[MAX_COUNTERS]; /* * There are two versions of the PMU in current XScale processors * with differing register layouts and number of performance counters. - * e.g. IOP321 is xsc1 whilst IOP331 is xsc2. + * e.g. IOP32x is xsc1 whilst IOP33x is xsc2. * We detect which register layout to use in xscale_detect_pmu() */ enum { PMU_XSC1, PMU_XSC2 }; diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile new file mode 100644 index 00000000000..23da00b1151 --- /dev/null +++ b/arch/arm/plat-iop/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel. +# + +obj-y := gpio.o i2c.o pci.o setup.o time.o +obj-m := +obj-n := +obj- := diff --git a/arch/arm/plat-iop/gpio.c b/arch/arm/plat-iop/gpio.c new file mode 100644 index 00000000000..eda43608341 --- /dev/null +++ b/arch/arm/plat-iop/gpio.c @@ -0,0 +1,48 @@ +/* + * arch/arm/plat-iop/gpio.c + * GPIO handling for Intel IOP3xx processors. + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/device.h> +#include <asm/hardware/iop3xx.h> + +void gpio_line_config(int line, int direction) +{ + unsigned long flags; + + local_irq_save(flags); + if (direction == GPIO_IN) { + *IOP3XX_GPOE |= 1 << line; + } else if (direction == GPIO_OUT) { + *IOP3XX_GPOE &= ~(1 << line); + } + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_line_config); + +int gpio_line_get(int line) +{ + return !!(*IOP3XX_GPID & (1 << line)); +} +EXPORT_SYMBOL(gpio_line_get); + +void gpio_line_set(int line, int value) +{ + unsigned long flags; + + local_irq_save(flags); + if (value == GPIO_LOW) { + *IOP3XX_GPOD &= ~(1 << line); + } else if (value == GPIO_HIGH) { + *IOP3XX_GPOD |= 1 << line; + } + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_line_set); diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c new file mode 100644 index 00000000000..e99909bdba7 --- /dev/null +++ b/arch/arm/plat-iop/i2c.c @@ -0,0 +1,81 @@ +/* + * arch/arm/plat-iop/i2c.c + * + * Author: Nicolas Pitre <nico@cam.org> + * Copyright (C) 2001 MontaVista Software, Inc. + * Copyright (C) 2004 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/major.h> +#include <linux/fs.h> +#include <linux/platform_device.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_core.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/system.h> +#include <asm/memory.h> +#include <asm/hardware.h> +#include <asm/hardware/iop3xx.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#ifdef CONFIG_ARCH_IOP32X +#define IRQ_IOP3XX_I2C_0 IRQ_IOP32X_I2C_0 +#define IRQ_IOP3XX_I2C_1 IRQ_IOP32X_I2C_1 +#endif +#ifdef CONFIG_ARCH_IOP33X +#define IRQ_IOP3XX_I2C_0 IRQ_IOP33X_I2C_0 +#define IRQ_IOP3XX_I2C_1 IRQ_IOP33X_I2C_1 +#endif + +static struct resource iop3xx_i2c0_resources[] = { + [0] = { + .start = 0xfffff680, + .end = 0xfffff697, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP3XX_I2C_0, + .end = IRQ_IOP3XX_I2C_0, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device iop3xx_i2c0_device = { + .name = "IOP3xx-I2C", + .id = 0, + .num_resources = 2, + .resource = iop3xx_i2c0_resources, +}; + + +static struct resource iop3xx_i2c1_resources[] = { + [0] = { + .start = 0xfffff6a0, + .end = 0xfffff6b7, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP3XX_I2C_1, + .end = IRQ_IOP3XX_I2C_1, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device iop3xx_i2c1_device = { + .name = "IOP3xx-I2C", + .id = 1, + .num_resources = 2, + .resource = iop3xx_i2c1_resources, +}; diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c new file mode 100644 index 00000000000..e647812654f --- /dev/null +++ b/arch/arm/plat-iop/pci.c @@ -0,0 +1,247 @@ +/* + * arch/arm/plat-iop/pci.c + * + * PCI support for the Intel IOP32X and IOP33X processors + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/hardware.h> +#include <asm/mach/pci.h> +#include <asm/hardware/iop3xx.h> + +// #define DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) do { } while (0) +#endif + +/* + * This routine builds either a type0 or type1 configuration command. If the + * bus is on the 803xx then a type0 made, else a type1 is created. + */ +static u32 iop3xx_cfg_address(struct pci_bus *bus, int devfn, int where) +{ + struct pci_sys_data *sys = bus->sysdata; + u32 addr; + + if (sys->busnr == bus->number) + addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); + else + addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; + + addr |= PCI_FUNC(devfn) << 8 | (where & ~3); + + return addr; +} + +/* + * This routine checks the status of the last configuration cycle. If an error + * was detected it returns a 1, else it returns a 0. The errors being checked + * are parity, master abort, target abort (master and target). These types of + * errors occure during a config cycle where there is no device, like during + * the discovery stage. + */ +static int iop3xx_pci_status(void) +{ + unsigned int status; + int ret = 0; + + /* + * Check the status registers. + */ + status = *IOP3XX_ATUSR; + if (status & 0xf900) { + DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); + *IOP3XX_ATUSR = status & 0xf900; + ret = 1; + } + + status = *IOP3XX_ATUISR; + if (status & 0x679f) { + DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); + *IOP3XX_ATUISR = status & 0x679f; + ret = 1; + } + + return ret; +} + +/* + * Simply write the address register and read the configuration + * data. Note that the 4 nop's ensure that we are able to handle + * a delayed abort (in theory.) + */ +static inline u32 iop3xx_read(unsigned long addr) +{ + u32 val; + + __asm__ __volatile__( + "str %1, [%2]\n\t" + "ldr %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : "=r" (val) + : "r" (addr), "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR)); + + return val; +} + +/* + * The read routines must check the error status of the last configuration + * cycle. If there was an error, the routine returns all hex f's. + */ +static int +iop3xx_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *value) +{ + unsigned long addr = iop3xx_cfg_address(bus, devfn, where); + u32 val = iop3xx_read(addr) >> ((where & 3) * 8); + + if (iop3xx_pci_status()) + val = 0xffffffff; + + *value = val; + + return PCIBIOS_SUCCESSFUL; +} + +static int +iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 value) +{ + unsigned long addr = iop3xx_cfg_address(bus, devfn, where); + u32 val; + + if (size != 4) { + val = iop3xx_read(addr); + if (iop3xx_pci_status()) + return PCIBIOS_SUCCESSFUL; + + where = (where & 3) * 8; + + if (size == 1) + val &= ~(0xff << where); + else + val &= ~(0xffff << where); + + *IOP3XX_OCCDR = val | value << where; + } else { + asm volatile( + "str %1, [%2]\n\t" + "str %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : + : "r" (value), "r" (addr), + "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR)); + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops iop3xx_ops = { + .read = iop3xx_read_config, + .write = iop3xx_write_config, +}; + +/* + * When a PCI device does not exist during config cycles, the 80200 gets a + * bus error instead of returning 0xffffffff. This handler simply returns. + */ +static int +iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", + addr, fsr, regs->ARM_pc, regs->ARM_lr); + + /* + * If it was an imprecise abort, then we need to correct the + * return address to be _after_ the instruction. + */ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; + + return 0; +} + +int iop3xx_pci_setup(int nr, struct pci_sys_data *sys) +{ + struct resource *res; + + if (nr != 0) + return 0; + + res = kzalloc(2 * sizeof(struct resource), GFP_KERNEL); + if (!res) + panic("PCI: unable to alloc resources"); + + res[0].start = IOP3XX_PCI_LOWER_IO_VA; + res[0].end = IOP3XX_PCI_LOWER_IO_VA + IOP3XX_PCI_IO_WINDOW_SIZE - 1; + res[0].name = "IOP3XX PCI I/O Space"; + res[0].flags = IORESOURCE_IO; + request_resource(&ioport_resource, &res[0]); + + res[1].start = IOP3XX_PCI_LOWER_MEM_PA; + res[1].end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1; + res[1].name = "IOP3XX PCI Memory Space"; + res[1].flags = IORESOURCE_MEM; + request_resource(&iomem_resource, &res[1]); + + sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - IOP3XX_PCI_LOWER_MEM_BA; + sys->io_offset = IOP3XX_PCI_LOWER_IO_VA - IOP3XX_PCI_LOWER_IO_BA; + + sys->resource[0] = &res[0]; + sys->resource[1] = &res[1]; + sys->resource[2] = NULL; + + return 1; +} + +struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &iop3xx_ops, sys); +} + +void iop3xx_pci_preinit(void) +{ + DBG("PCI: Intel 803xx PCI init code.\n"); + DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD); + DBG("ATU: IOP3XX_OMWTVR0=0x%04x, IOP3XX_OIOWTVR=0x%04x\n", + *IOP3XX_OMWTVR0, + *IOP3XX_OIOWTVR); + DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR); + DBG("ATU: IOP3XX_IABAR0=0x%08x IOP3XX_IALR0=0x%08x IOP3XX_IATVR0=%08x\n", + *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0); + DBG("ATU: IOP3XX_OMWTVR0=0x%08x\n", *IOP3XX_OMWTVR0); + DBG("ATU: IOP3XX_IABAR1=0x%08x IOP3XX_IALR1=0x%08x\n", + *IOP3XX_IABAR1, *IOP3XX_IALR1); + DBG("ATU: IOP3XX_ERBAR=0x%08x IOP3XX_ERLR=0x%08x IOP3XX_ERTVR=%08x\n", + *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR); + DBG("ATU: IOP3XX_IABAR2=0x%08x IOP3XX_IALR2=0x%08x IOP3XX_IATVR2=%08x\n", + *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2); + DBG("ATU: IOP3XX_IABAR3=0x%08x IOP3XX_IALR3=0x%08x IOP3XX_IATVR3=%08x\n", + *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3); + + hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, "imprecise external abort"); +} diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c new file mode 100644 index 00000000000..4689db638e9 --- /dev/null +++ b/arch/arm/plat-iop/setup.c @@ -0,0 +1,38 @@ +/* + * arch/arm/plat-iop/setup.c + * + * Author: Nicolas Pitre <nico@cam.org> + * Copyright (C) 2001 MontaVista Software, Inc. + * Copyright (C) 2004 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <asm/mach/map.h> +#include <asm/hardware/iop3xx.h> + +/* + * Standard IO mapping for all IOP3xx based systems + */ +static struct map_desc iop3xx_std_desc[] __initdata = { + { /* mem mapped registers */ + .virtual = IOP3XX_PERIPHERAL_VIRT_BASE, + .pfn = __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE), + .length = IOP3XX_PERIPHERAL_SIZE, + .type = MT_DEVICE, + }, { /* PCI IO space */ + .virtual = IOP3XX_PCI_LOWER_IO_VA, + .pfn = __phys_to_pfn(IOP3XX_PCI_LOWER_IO_PA), + .length = IOP3XX_PCI_IO_WINDOW_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init iop3xx_map_io(void) +{ + iotable_init(iop3xx_std_desc, ARRAY_SIZE(iop3xx_std_desc)); +} diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c new file mode 100644 index 00000000000..06282dffbdc --- /dev/null +++ b/arch/arm/plat-iop/time.c @@ -0,0 +1,98 @@ +/* + * arch/arm/plat-iop/time.c + * + * Timer code for IOP32x and IOP33x based systems + * + * Author: Deepak Saxena <dsaxena@mvista.com> + * + * Copyright 2002-2003 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/init.h> +#include <linux/timex.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> + +#ifdef CONFIG_ARCH_IOP32X +#define IRQ_IOP3XX_TIMER0 IRQ_IOP32X_TIMER0 +#else +#ifdef CONFIG_ARCH_IOP33X +#define IRQ_IOP3XX_TIMER0 IRQ_IOP33X_TIMER0 +#endif +#endif + +static unsigned long ticks_per_jiffy; +static unsigned long ticks_per_usec; +static unsigned long next_jiffy_time; + +unsigned long iop3xx_gettimeoffset(void) +{ + unsigned long offset; + + offset = next_jiffy_time - *IOP3XX_TU_TCR1; + + return offset / ticks_per_usec; +} + +static irqreturn_t +iop3xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + write_seqlock(&xtime_lock); + + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (1)); + iop3xx_cp6_disable(); + + while ((signed long)(next_jiffy_time - *IOP3XX_TU_TCR1) + >= ticks_per_jiffy) { + timer_tick(regs); + next_jiffy_time -= ticks_per_jiffy; + } + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction iop3xx_timer_irq = { + .name = "IOP3XX Timer Tick", + .handler = iop3xx_timer_interrupt, + .flags = IRQF_DISABLED | IRQF_TIMER, +}; + +void __init iop3xx_init_time(unsigned long tick_rate) +{ + u32 timer_ctl; + + ticks_per_jiffy = (tick_rate + HZ/2) / HZ; + ticks_per_usec = tick_rate / 1000000; + next_jiffy_time = 0xffffffff; + + timer_ctl = IOP3XX_TMR_EN | IOP3XX_TMR_PRIVILEGED | + IOP3XX_TMR_RELOAD | IOP3XX_TMR_RATIO_1_1; + + /* + * We use timer 0 for our timer interrupt, and timer 1 as + * monotonic counter for tracking missed jiffies. + */ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (ticks_per_jiffy - 1)); + asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl)); + asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (0xffffffff)); + asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (timer_ctl)); + iop3xx_cp6_disable(); + + setup_irq(IRQ_IOP3XX_TIMER0, &iop3xx_timer_irq); +} diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 7f45c7c3e67..f1179ad4be1 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -100,6 +100,7 @@ void clk_disable(struct clk *clk) return; spin_lock_irqsave(&clockfw_lock, flags); + BUG_ON(clk->usecount == 0); if (arch_clock->clk_disable) arch_clock->clk_disable(clk); spin_unlock_irqrestore(&clockfw_lock, flags); @@ -322,6 +323,31 @@ EXPORT_SYMBOL(clk_allow_idle); /*-------------------------------------------------------------------------*/ +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + unsigned long flags; + + list_for_each_entry(ck, &clocks, node) { + if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) || + ck->enable_reg == 0) + continue; + + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_disable_unused) + arch_clock->clk_disable_unused(ck); + spin_unlock_irqrestore(&clockfw_lock, flags); + } + + return 0; +} +late_initcall(clk_disable_unused); +#endif + int __init clk_init(struct clk_functions * custom_clocks) { if (!custom_clocks) { diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 1812f237d12..dbc3f44e07a 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -148,7 +148,7 @@ static inline void omap_init_kp(void) {} #ifdef CONFIG_ARCH_OMAP24XX #define OMAP_MMC1_BASE 0x4809c000 -#define OMAP_MMC1_INT 83 +#define OMAP_MMC1_INT INT_24XX_MMC_IRQ #else #define OMAP_MMC1_BASE 0xfffb7800 #define OMAP_MMC1_INT INT_MMC @@ -225,7 +225,14 @@ static void __init omap_init_mmc(void) /* block 1 is always available and has just one pinout option */ mmc = &mmc_conf->mmc[0]; if (mmc->enabled) { - if (!cpu_is_omap24xx()) { + if (cpu_is_omap24xx()) { + omap_cfg_reg(H18_24XX_MMC_CMD); + omap_cfg_reg(H15_24XX_MMC_CLKI); + omap_cfg_reg(G19_24XX_MMC_CLKO); + omap_cfg_reg(F20_24XX_MMC_DAT0); + omap_cfg_reg(F19_24XX_MMC_DAT_DIR0); + omap_cfg_reg(G18_24XX_MMC_CMD_DIR); + } else { omap_cfg_reg(MMC_CMD); omap_cfg_reg(MMC_CLK); omap_cfg_reg(MMC_DAT0); @@ -236,7 +243,14 @@ static void __init omap_init_mmc(void) } } if (mmc->wire4) { - if (!cpu_is_omap24xx()) { + if (cpu_is_omap24xx()) { + omap_cfg_reg(H14_24XX_MMC_DAT1); + omap_cfg_reg(E19_24XX_MMC_DAT2); + omap_cfg_reg(D19_24XX_MMC_DAT3); + omap_cfg_reg(E20_24XX_MMC_DAT_DIR1); + omap_cfg_reg(F18_24XX_MMC_DAT_DIR2); + omap_cfg_reg(E18_24XX_MMC_DAT_DIR3); + } else { omap_cfg_reg(MMC_DAT1); /* NOTE: DAT2 can be on W10 (here) or M15 */ if (!mmc->nomux) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 9eddc950714..1bbb431843c 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -119,32 +119,41 @@ static void clear_lch_regs(int lch) omap_writew(0, lch_base + i); } -void omap_set_dma_priority(int dst_port, int priority) +void omap_set_dma_priority(int lch, int dst_port, int priority) { unsigned long reg; u32 l; - switch (dst_port) { - case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */ - reg = OMAP_TC_OCPT1_PRIOR; - break; - case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */ - reg = OMAP_TC_OCPT2_PRIOR; - break; - case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */ - reg = OMAP_TC_EMIFF_PRIOR; - break; - case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */ - reg = OMAP_TC_EMIFS_PRIOR; - break; - default: - BUG(); - return; + if (cpu_class_is_omap1()) { + switch (dst_port) { + case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */ + reg = OMAP_TC_OCPT1_PRIOR; + break; + case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */ + reg = OMAP_TC_OCPT2_PRIOR; + break; + case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */ + reg = OMAP_TC_EMIFF_PRIOR; + break; + case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */ + reg = OMAP_TC_EMIFS_PRIOR; + break; + default: + BUG(); + return; + } + l = omap_readl(reg); + l &= ~(0xf << 8); + l |= (priority & 0xf) << 8; + omap_writel(l, reg); + } + + if (cpu_is_omap24xx()) { + if (priority) + OMAP_DMA_CCR_REG(lch) |= (1 << 6); + else + OMAP_DMA_CCR_REG(lch) &= ~(1 << 6); } - l = omap_readl(reg); - l &= ~(0xf << 8); - l |= (priority & 0xf) << 8; - omap_writel(l, reg); } void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, @@ -234,6 +243,14 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) OMAP1_DMA_LCH_CTRL_REG(lch) = w; } +void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode) +{ + if (cpu_is_omap24xx()) { + OMAP_DMA_CSDP_REG(lch) &= ~(0x3 << 16); + OMAP_DMA_CSDP_REG(lch) |= (mode << 16); + } +} + /* Note that src_port is only for omap1 */ void omap_set_dma_src_params(int lch, int src_port, int src_amode, unsigned long src_start, @@ -698,6 +715,32 @@ void omap_stop_dma(int lch) } /* + * Allows changing the DMA callback function or data. This may be needed if + * the driver shares a single DMA channel for multiple dma triggers. + */ +int omap_set_dma_callback(int lch, + void (* callback)(int lch, u16 ch_status, void *data), + void *data) +{ + unsigned long flags; + + if (lch < 0) + return -ENODEV; + + spin_lock_irqsave(&dma_chan_lock, flags); + if (dma_chan[lch].dev_id == -1) { + printk(KERN_ERR "DMA callback for not set for free channel\n"); + spin_unlock_irqrestore(&dma_chan_lock, flags); + return -EINVAL; + } + dma_chan[lch].callback = callback; + dma_chan[lch].data = data; + spin_unlock_irqrestore(&dma_chan_lock, flags); + + return 0; +} + +/* * Returns current physical source address for the given DMA channel. * If the channel is running the caller must disable interrupts prior calling * this function and process the returned value before re-enabling interrupt to @@ -1339,6 +1382,14 @@ static int __init omap_init_dma(void) dma_chan_count = 16; } else dma_chan_count = 9; + if (cpu_is_omap16xx()) { + u16 w; + + /* this would prevent OMAP sleep */ + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w &= ~(1 << 8); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + } } else if (cpu_is_omap24xx()) { u8 revision = omap_readb(OMAP_DMA4_REVISION); printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", @@ -1414,11 +1465,13 @@ EXPORT_SYMBOL(omap_request_dma); EXPORT_SYMBOL(omap_free_dma); EXPORT_SYMBOL(omap_start_dma); EXPORT_SYMBOL(omap_stop_dma); +EXPORT_SYMBOL(omap_set_dma_callback); EXPORT_SYMBOL(omap_enable_dma_irq); EXPORT_SYMBOL(omap_disable_dma_irq); EXPORT_SYMBOL(omap_set_dma_transfer_params); EXPORT_SYMBOL(omap_set_dma_color_mode); +EXPORT_SYMBOL(omap_set_dma_write_mode); EXPORT_SYMBOL(omap_set_dma_src_params); EXPORT_SYMBOL(omap_set_dma_src_index); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 50524436de6..bcbb8d7392b 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -75,10 +75,14 @@ struct omap_dm_timer { #endif void __iomem *io_base; unsigned reserved:1; + unsigned enabled:1; }; #ifdef CONFIG_ARCH_OMAP1 +#define omap_dm_clk_enable(x) +#define omap_dm_clk_disable(x) + static struct omap_dm_timer dm_timers[] = { { .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 }, { .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 }, @@ -92,6 +96,9 @@ static struct omap_dm_timer dm_timers[] = { #elif defined(CONFIG_ARCH_OMAP2) +#define omap_dm_clk_enable(x) clk_enable(x) +#define omap_dm_clk_disable(x) clk_disable(x) + static struct omap_dm_timer dm_timers[] = { { .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 }, { .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 }, @@ -154,24 +161,28 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer) { u32 l; - if (timer != &dm_timers[0]) { + if (!cpu_class_is_omap2() || timer != &dm_timers[0]) { omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); omap_dm_timer_wait_for_reset(timer); } - omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_SYS_CLK); + omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); /* Set to smart-idle mode */ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG); l |= 0x02 << 3; + + if (cpu_class_is_omap2() && timer == &dm_timers[0]) { + /* Enable wake-up only for GPT1 on OMAP2 CPUs*/ + l |= 1 << 2; + /* Non-posted mode */ + omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0); + } omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l); } static void omap_dm_timer_prepare(struct omap_dm_timer *timer) { -#ifdef CONFIG_ARCH_OMAP2 - clk_enable(timer->iclk); - clk_enable(timer->fclk); -#endif + omap_dm_timer_enable(timer); omap_dm_timer_reset(timer); } @@ -223,15 +234,36 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) void omap_dm_timer_free(struct omap_dm_timer *timer) { + omap_dm_timer_enable(timer); omap_dm_timer_reset(timer); -#ifdef CONFIG_ARCH_OMAP2 - clk_disable(timer->iclk); - clk_disable(timer->fclk); -#endif + omap_dm_timer_disable(timer); + WARN_ON(!timer->reserved); timer->reserved = 0; } +void omap_dm_timer_enable(struct omap_dm_timer *timer) +{ + if (timer->enabled) + return; + + omap_dm_clk_enable(timer->fclk); + omap_dm_clk_enable(timer->iclk); + + timer->enabled = 1; +} + +void omap_dm_timer_disable(struct omap_dm_timer *timer) +{ + if (!timer->enabled) + return; + + omap_dm_clk_disable(timer->iclk); + omap_dm_clk_disable(timer->fclk); + + timer->enabled = 0; +} + int omap_dm_timer_get_irq(struct omap_dm_timer *timer) { return timer->irq; @@ -276,7 +308,7 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask) struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer) { - return timer->fclk; + return timer->fclk; } __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask) @@ -406,11 +438,16 @@ void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value) { omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value); + omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, value); } unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) { - return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG); + unsigned int l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG); + + return l; } void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) @@ -420,12 +457,16 @@ void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer) { - return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG); + unsigned int l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG); + + return l; } void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value) { - return omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value); + omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value); } int omap_dm_timers_active(void) @@ -436,9 +477,14 @@ int omap_dm_timers_active(void) struct omap_dm_timer *timer; timer = &dm_timers[i]; + + if (!timer->enabled) + continue; + if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) & - OMAP_TIMER_CTRL_ST) + OMAP_TIMER_CTRL_ST) { return 1; + } } return 0; } diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index cd7f973fb28..f55f99ae58a 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -94,6 +94,8 @@ #define OMAP24XX_GPIO_SYSCONFIG 0x0010 #define OMAP24XX_GPIO_SYSSTATUS 0x0014 #define OMAP24XX_GPIO_IRQSTATUS1 0x0018 +#define OMAP24XX_GPIO_IRQSTATUS2 0x0028 +#define OMAP24XX_GPIO_IRQENABLE2 0x002c #define OMAP24XX_GPIO_IRQENABLE1 0x001c #define OMAP24XX_GPIO_CTRL 0x0030 #define OMAP24XX_GPIO_OE 0x0034 @@ -110,8 +112,6 @@ #define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 #define OMAP24XX_GPIO_SETDATAOUT 0x0094 -#define OMAP_MPUIO_MASK (~OMAP_MAX_GPIO_LINES & 0xff) - struct gpio_bank { void __iomem *base; u16 irq; @@ -216,11 +216,13 @@ static inline int gpio_valid(int gpio) { if (gpio < 0) return -1; +#ifndef CONFIG_ARCH_OMAP24XX if (OMAP_GPIO_IS_MPUIO(gpio)) { - if ((gpio & OMAP_MPUIO_MASK) > 16) + if (gpio >= OMAP_MAX_GPIO_LINES + 16) return -1; return 0; } +#endif #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx() && gpio < 16) return 0; @@ -529,6 +531,10 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) return; } __raw_writel(gpio_mask, reg); + + /* Workaround for clearing DSP GPIO interrupts to allow retention */ + if (cpu_is_omap2420()) + __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2); } static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) @@ -662,6 +668,14 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) } } +static void _reset_gpio(struct gpio_bank *bank, int gpio) +{ + _set_gpio_direction(bank, get_gpio_index(gpio), 1); + _set_gpio_irqenable(bank, gpio, 0); + _clear_gpio_irqstatus(bank, gpio); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); +} + /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ static int gpio_wake_enable(unsigned int irq, unsigned int enable) { @@ -672,9 +686,7 @@ static int gpio_wake_enable(unsigned int irq, unsigned int enable) if (check_gpio(gpio) < 0) return -ENODEV; bank = get_gpio_bank(gpio); - spin_lock(&bank->lock); retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable); - spin_unlock(&bank->lock); return retval; } @@ -696,7 +708,9 @@ int omap_request_gpio(int gpio) } bank->reserved_map |= (1 << get_gpio_index(gpio)); - /* Set trigger to none. You need to enable the trigger after request_irq */ + /* Set trigger to none. You need to enable the desired trigger with + * request_irq() or set_irq_type(). + */ _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); #ifdef CONFIG_ARCH_OMAP15XX @@ -756,9 +770,7 @@ void omap_free_gpio(int gpio) } #endif bank->reserved_map &= ~(1 << get_gpio_index(gpio)); - _set_gpio_direction(bank, get_gpio_index(gpio), 1); - _set_gpio_irqenable(bank, gpio, 0); - _clear_gpio_irqstatus(bank, gpio); + _reset_gpio(bank, gpio); spin_unlock(&bank->lock); } @@ -898,6 +910,14 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, } +static void gpio_irq_shutdown(unsigned int irq) +{ + unsigned int gpio = irq - IH_GPIO_BASE; + struct gpio_bank *bank = get_gpio_bank(gpio); + + _reset_gpio(bank, gpio); +} + static void gpio_ack_irq(unsigned int irq) { unsigned int gpio = irq - IH_GPIO_BASE; @@ -946,6 +966,7 @@ static void mpuio_unmask_irq(unsigned int irq) static struct irq_chip gpio_irq_chip = { .name = "GPIO", + .shutdown = gpio_irq_shutdown, .ack = gpio_ack_irq, .mask = gpio_mask_irq, .unmask = gpio_unmask_irq, @@ -985,7 +1006,7 @@ static int __init _omap_gpio_init(void) else clk_enable(gpio_ick); gpio_fck = clk_get(NULL, "gpios_fck"); - if (IS_ERR(gpio_ick)) + if (IS_ERR(gpio_fck)) printk("Could not get gpios_fck\n"); else clk_enable(gpio_fck); @@ -1144,8 +1165,8 @@ static int omap_gpio_resume(struct sys_device *dev) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; case METHOD_GPIO_24XX: - wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; break; default: continue; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 196aac3ac32..ade9a0fa6ef 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -75,8 +75,6 @@ static struct clk *mcbsp1_ick = 0; static struct clk *mcbsp1_fck = 0; static struct clk *mcbsp2_ick = 0; static struct clk *mcbsp2_fck = 0; -static struct clk *sys_ck = 0; -static struct clk *sys_clkout = 0; #endif static void omap_mcbsp_dump_reg(u8 id) @@ -232,7 +230,6 @@ static void omap2_mcbsp2_mux_setup(void) omap_cfg_reg(W15_24XX_MCBSP2_DR); omap_cfg_reg(V15_24XX_MCBSP2_DX); omap_cfg_reg(V14_24XX_GPIO117); - omap_cfg_reg(W14_24XX_SYS_CLKOUT); } #endif @@ -984,13 +981,7 @@ static int __init omap_mcbsp_init(void) if (cpu_is_omap24xx()) { mcbsp_info = mcbsp_24xx; mcbsp_count = ARRAY_SIZE(mcbsp_24xx); - - /* REVISIT: where's the right place? */ omap2_mcbsp2_mux_setup(); - sys_ck = clk_get(0, "sys_ck"); - sys_clkout = clk_get(0, "sys_clkout"); - clk_set_parent(sys_clkout, sys_ck); - clk_enable(sys_clkout); } #endif for (i = 0; i < OMAP_MAX_MCBSP_COUNT ; i++) { diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c deleted file mode 100644 index 04b4102727a..00000000000 --- a/arch/arm/plat-omap/pm.c +++ /dev/null @@ -1,670 +0,0 @@ -/* - * linux/arch/arm/plat-omap/pm.c - * - * OMAP Power Management Routines - * - * Original code for the SA11x0: - * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> - * - * Modified for the PXA250 by Nicolas Pitre: - * Copyright (c) 2002 Monta Vista Software, Inc. - * - * Modified for the OMAP1510 by David Singleton: - * Copyright (c) 2002 Monta Vista Software, Inc. - * - * Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/pm.h> -#include <linux/sched.h> -#include <linux/proc_fs.h> -#include <linux/pm.h> -#include <linux/interrupt.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/mach/time.h> -#include <asm/mach/irq.h> - -#include <asm/mach-types.h> -#include <asm/arch/irqs.h> -#include <asm/arch/tc.h> -#include <asm/arch/pm.h> -#include <asm/arch/mux.h> -#include <asm/arch/tps65010.h> -#include <asm/arch/dsp_common.h> - -#include <asm/arch/clock.h> -#include <asm/arch/sram.h> - -static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; -static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; -static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE]; -static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; -static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; - -static void (*omap_sram_idle)(void) = NULL; -static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; - -/* - * Let's power down on idle, but only if we are really - * idle, because once we start down the path of - * going idle we continue to do idle even if we get - * a clock tick interrupt . . - */ -void omap_pm_idle(void) -{ - unsigned int mask32 = 0; - - /* - * If the DSP is being used let's just idle the CPU, the overhead - * to wake up from Big Sleep is big, milliseconds versus micro - * seconds for wait for interrupt. - */ - - local_irq_disable(); - local_fiq_disable(); - if (need_resched()) { - local_fiq_enable(); - local_irq_enable(); - return; - } - mask32 = omap_readl(ARM_SYSST); - - /* - * Prevent the ULPD from entering low power state by setting - * POWER_CTRL_REG:4 = 0 - */ - omap_writew(omap_readw(ULPD_POWER_CTRL) & - ~ULPD_DEEP_SLEEP_TRANSITION_EN, ULPD_POWER_CTRL); - - /* - * Since an interrupt may set up a timer, we don't want to - * reprogram the hardware timer with interrupts enabled. - * Re-enable interrupts only after returning from idle. - */ - timer_dyn_reprogram(); - - if ((mask32 & DSP_IDLE) == 0) { - __asm__ volatile ("mcr p15, 0, r0, c7, c0, 4"); - } else - omap_sram_idle(); - - local_fiq_enable(); - local_irq_enable(); -} - -/* - * Configuration of the wakeup event is board specific. For the - * moment we put it into this helper function. Later it may move - * to board specific files. - */ -static void omap_pm_wakeup_setup(void) -{ - u32 level1_wake = 0; - u32 level2_wake = OMAP_IRQ_BIT(INT_UART2); - - /* - * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade, - * and the L2 wakeup interrupts: keypad and UART2. Note that the - * drivers must still separately call omap_set_gpio_wakeup() to - * wake up to a GPIO interrupt. - */ - if (cpu_is_omap730()) - level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) | - OMAP_IRQ_BIT(INT_730_IH2_IRQ); - else if (cpu_is_omap1510()) - level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | - OMAP_IRQ_BIT(INT_1510_IH2_IRQ); - else if (cpu_is_omap16xx()) - level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | - OMAP_IRQ_BIT(INT_1610_IH2_IRQ); - - omap_writel(~level1_wake, OMAP_IH1_MIR); - - if (cpu_is_omap730()) { - omap_writel(~level2_wake, OMAP_IH2_0_MIR); - omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), OMAP_IH2_1_MIR); - } else if (cpu_is_omap1510()) { - level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); - omap_writel(~level2_wake, OMAP_IH2_MIR); - } else if (cpu_is_omap16xx()) { - level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); - omap_writel(~level2_wake, OMAP_IH2_0_MIR); - - /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */ - omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR); - omap_writel(~0x0, OMAP_IH2_2_MIR); - omap_writel(~0x0, OMAP_IH2_3_MIR); - } - - /* New IRQ agreement, recalculate in cascade order */ - omap_writel(1, OMAP_IH2_CONTROL); - omap_writel(1, OMAP_IH1_CONTROL); -} - -void omap_pm_suspend(void) -{ - unsigned long arg0 = 0, arg1 = 0; - - printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev); - - omap_serial_wake_trigger(1); - - if (machine_is_omap_osk()) { - /* Stop LED1 (D9) blink */ - tps65010_set_led(LED1, OFF); - } - - omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG); - - /* - * Step 1: turn off interrupts (FIXME: NOTE: already disabled) - */ - - local_irq_disable(); - local_fiq_disable(); - - /* - * Step 2: save registers - * - * The omap is a strange/beautiful device. The caches, memory - * and register state are preserved across power saves. - * We have to save and restore very little register state to - * idle the omap. - * - * Save interrupt, MPUI, ARM and UPLD control registers. - */ - - if (cpu_is_omap730()) { - MPUI730_SAVE(OMAP_IH1_MIR); - MPUI730_SAVE(OMAP_IH2_0_MIR); - MPUI730_SAVE(OMAP_IH2_1_MIR); - MPUI730_SAVE(MPUI_CTRL); - MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI730_SAVE(MPUI_DSP_API_CONFIG); - MPUI730_SAVE(EMIFS_CONFIG); - MPUI730_SAVE(EMIFF_SDRAM_CONFIG); - - } else if (cpu_is_omap1510()) { - MPUI1510_SAVE(OMAP_IH1_MIR); - MPUI1510_SAVE(OMAP_IH2_MIR); - MPUI1510_SAVE(MPUI_CTRL); - MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI1510_SAVE(MPUI_DSP_API_CONFIG); - MPUI1510_SAVE(EMIFS_CONFIG); - MPUI1510_SAVE(EMIFF_SDRAM_CONFIG); - } else if (cpu_is_omap16xx()) { - MPUI1610_SAVE(OMAP_IH1_MIR); - MPUI1610_SAVE(OMAP_IH2_0_MIR); - MPUI1610_SAVE(OMAP_IH2_1_MIR); - MPUI1610_SAVE(OMAP_IH2_2_MIR); - MPUI1610_SAVE(OMAP_IH2_3_MIR); - MPUI1610_SAVE(MPUI_CTRL); - MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI1610_SAVE(MPUI_DSP_API_CONFIG); - MPUI1610_SAVE(EMIFS_CONFIG); - MPUI1610_SAVE(EMIFF_SDRAM_CONFIG); - } - - ARM_SAVE(ARM_CKCTL); - ARM_SAVE(ARM_IDLECT1); - ARM_SAVE(ARM_IDLECT2); - if (!(cpu_is_omap1510())) - ARM_SAVE(ARM_IDLECT3); - ARM_SAVE(ARM_EWUPCT); - ARM_SAVE(ARM_RSTCT1); - ARM_SAVE(ARM_RSTCT2); - ARM_SAVE(ARM_SYSST); - ULPD_SAVE(ULPD_CLOCK_CTRL); - ULPD_SAVE(ULPD_STATUS_REQ); - - /* (Step 3 removed - we now allow deep sleep by default) */ - - /* - * Step 4: OMAP DSP Shutdown - */ - - - /* - * Step 5: Wakeup Event Setup - */ - - omap_pm_wakeup_setup(); - - /* - * Step 6: ARM and Traffic controller shutdown - */ - - /* disable ARM watchdog */ - omap_writel(0x00F5, OMAP_WDT_TIMER_MODE); - omap_writel(0x00A0, OMAP_WDT_TIMER_MODE); - - /* - * Step 6b: ARM and Traffic controller shutdown - * - * Step 6 continues here. Prepare jump to power management - * assembly code in internal SRAM. - * - * Since the omap_cpu_suspend routine has been copied to - * SRAM, we'll do an indirect procedure call to it and pass the - * contents of arm_idlect1 and arm_idlect2 so it can restore - * them when it wakes up and it will return. - */ - - arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1]; - arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2]; - - /* - * Step 6c: ARM and Traffic controller shutdown - * - * Jump to assembly code. The processor will stay there - * until wake up. - */ - omap_sram_suspend(arg0, arg1); - - /* - * If we are here, processor is woken up! - */ - - /* - * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did - */ - - if (!(cpu_is_omap1510())) - ARM_RESTORE(ARM_IDLECT3); - ARM_RESTORE(ARM_CKCTL); - ARM_RESTORE(ARM_EWUPCT); - ARM_RESTORE(ARM_RSTCT1); - ARM_RESTORE(ARM_RSTCT2); - ARM_RESTORE(ARM_SYSST); - ULPD_RESTORE(ULPD_CLOCK_CTRL); - ULPD_RESTORE(ULPD_STATUS_REQ); - - if (cpu_is_omap730()) { - MPUI730_RESTORE(EMIFS_CONFIG); - MPUI730_RESTORE(EMIFF_SDRAM_CONFIG); - MPUI730_RESTORE(OMAP_IH1_MIR); - MPUI730_RESTORE(OMAP_IH2_0_MIR); - MPUI730_RESTORE(OMAP_IH2_1_MIR); - } else if (cpu_is_omap1510()) { - MPUI1510_RESTORE(MPUI_CTRL); - MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG); - MPUI1510_RESTORE(MPUI_DSP_API_CONFIG); - MPUI1510_RESTORE(EMIFS_CONFIG); - MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG); - MPUI1510_RESTORE(OMAP_IH1_MIR); - MPUI1510_RESTORE(OMAP_IH2_MIR); - } else if (cpu_is_omap16xx()) { - MPUI1610_RESTORE(MPUI_CTRL); - MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG); - MPUI1610_RESTORE(MPUI_DSP_API_CONFIG); - MPUI1610_RESTORE(EMIFS_CONFIG); - MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG); - - MPUI1610_RESTORE(OMAP_IH1_MIR); - MPUI1610_RESTORE(OMAP_IH2_0_MIR); - MPUI1610_RESTORE(OMAP_IH2_1_MIR); - MPUI1610_RESTORE(OMAP_IH2_2_MIR); - MPUI1610_RESTORE(OMAP_IH2_3_MIR); - } - - omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG); - - /* - * Reenable interrupts - */ - - local_irq_enable(); - local_fiq_enable(); - - omap_serial_wake_trigger(0); - - printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev); - - if (machine_is_omap_osk()) { - /* Let LED1 (D9) blink again */ - tps65010_set_led(LED1, BLINK); - } -} - -#if defined(DEBUG) && defined(CONFIG_PROC_FS) -static int g_read_completed; - -/* - * Read system PM registers for debugging - */ -static int omap_pm_read_proc( - char *page_buffer, - char **my_first_byte, - off_t virtual_start, - int length, - int *eof, - void *data) -{ - int my_buffer_offset = 0; - char * const my_base = page_buffer; - - ARM_SAVE(ARM_CKCTL); - ARM_SAVE(ARM_IDLECT1); - ARM_SAVE(ARM_IDLECT2); - if (!(cpu_is_omap1510())) - ARM_SAVE(ARM_IDLECT3); - ARM_SAVE(ARM_EWUPCT); - ARM_SAVE(ARM_RSTCT1); - ARM_SAVE(ARM_RSTCT2); - ARM_SAVE(ARM_SYSST); - - ULPD_SAVE(ULPD_IT_STATUS); - ULPD_SAVE(ULPD_CLOCK_CTRL); - ULPD_SAVE(ULPD_SOFT_REQ); - ULPD_SAVE(ULPD_STATUS_REQ); - ULPD_SAVE(ULPD_DPLL_CTRL); - ULPD_SAVE(ULPD_POWER_CTRL); - - if (cpu_is_omap730()) { - MPUI730_SAVE(MPUI_CTRL); - MPUI730_SAVE(MPUI_DSP_STATUS); - MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI730_SAVE(MPUI_DSP_API_CONFIG); - MPUI730_SAVE(EMIFF_SDRAM_CONFIG); - MPUI730_SAVE(EMIFS_CONFIG); - } else if (cpu_is_omap1510()) { - MPUI1510_SAVE(MPUI_CTRL); - MPUI1510_SAVE(MPUI_DSP_STATUS); - MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI1510_SAVE(MPUI_DSP_API_CONFIG); - MPUI1510_SAVE(EMIFF_SDRAM_CONFIG); - MPUI1510_SAVE(EMIFS_CONFIG); - } else if (cpu_is_omap16xx()) { - MPUI1610_SAVE(MPUI_CTRL); - MPUI1610_SAVE(MPUI_DSP_STATUS); - MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI1610_SAVE(MPUI_DSP_API_CONFIG); - MPUI1610_SAVE(EMIFF_SDRAM_CONFIG); - MPUI1610_SAVE(EMIFS_CONFIG); - } - - if (virtual_start == 0) { - g_read_completed = 0; - - my_buffer_offset += sprintf(my_base + my_buffer_offset, - "ARM_CKCTL_REG: 0x%-8x \n" - "ARM_IDLECT1_REG: 0x%-8x \n" - "ARM_IDLECT2_REG: 0x%-8x \n" - "ARM_IDLECT3_REG: 0x%-8x \n" - "ARM_EWUPCT_REG: 0x%-8x \n" - "ARM_RSTCT1_REG: 0x%-8x \n" - "ARM_RSTCT2_REG: 0x%-8x \n" - "ARM_SYSST_REG: 0x%-8x \n" - "ULPD_IT_STATUS_REG: 0x%-4x \n" - "ULPD_CLOCK_CTRL_REG: 0x%-4x \n" - "ULPD_SOFT_REQ_REG: 0x%-4x \n" - "ULPD_DPLL_CTRL_REG: 0x%-4x \n" - "ULPD_STATUS_REQ_REG: 0x%-4x \n" - "ULPD_POWER_CTRL_REG: 0x%-4x \n", - ARM_SHOW(ARM_CKCTL), - ARM_SHOW(ARM_IDLECT1), - ARM_SHOW(ARM_IDLECT2), - ARM_SHOW(ARM_IDLECT3), - ARM_SHOW(ARM_EWUPCT), - ARM_SHOW(ARM_RSTCT1), - ARM_SHOW(ARM_RSTCT2), - ARM_SHOW(ARM_SYSST), - ULPD_SHOW(ULPD_IT_STATUS), - ULPD_SHOW(ULPD_CLOCK_CTRL), - ULPD_SHOW(ULPD_SOFT_REQ), - ULPD_SHOW(ULPD_DPLL_CTRL), - ULPD_SHOW(ULPD_STATUS_REQ), - ULPD_SHOW(ULPD_POWER_CTRL)); - - if (cpu_is_omap730()) { - my_buffer_offset += sprintf(my_base + my_buffer_offset, - "MPUI730_CTRL_REG 0x%-8x \n" - "MPUI730_DSP_STATUS_REG: 0x%-8x \n" - "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n" - "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n" - "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n" - "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n", - MPUI730_SHOW(MPUI_CTRL), - MPUI730_SHOW(MPUI_DSP_STATUS), - MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG), - MPUI730_SHOW(MPUI_DSP_API_CONFIG), - MPUI730_SHOW(EMIFF_SDRAM_CONFIG), - MPUI730_SHOW(EMIFS_CONFIG)); - } else if (cpu_is_omap1510()) { - my_buffer_offset += sprintf(my_base + my_buffer_offset, - "MPUI1510_CTRL_REG 0x%-8x \n" - "MPUI1510_DSP_STATUS_REG: 0x%-8x \n" - "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n" - "MPUI1510_DSP_API_CONFIG_REG: 0x%-8x \n" - "MPUI1510_SDRAM_CONFIG_REG: 0x%-8x \n" - "MPUI1510_EMIFS_CONFIG_REG: 0x%-8x \n", - MPUI1510_SHOW(MPUI_CTRL), - MPUI1510_SHOW(MPUI_DSP_STATUS), - MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG), - MPUI1510_SHOW(MPUI_DSP_API_CONFIG), - MPUI1510_SHOW(EMIFF_SDRAM_CONFIG), - MPUI1510_SHOW(EMIFS_CONFIG)); - } else if (cpu_is_omap16xx()) { - my_buffer_offset += sprintf(my_base + my_buffer_offset, - "MPUI1610_CTRL_REG 0x%-8x \n" - "MPUI1610_DSP_STATUS_REG: 0x%-8x \n" - "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n" - "MPUI1610_DSP_API_CONFIG_REG: 0x%-8x \n" - "MPUI1610_SDRAM_CONFIG_REG: 0x%-8x \n" - "MPUI1610_EMIFS_CONFIG_REG: 0x%-8x \n", - MPUI1610_SHOW(MPUI_CTRL), - MPUI1610_SHOW(MPUI_DSP_STATUS), - MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG), - MPUI1610_SHOW(MPUI_DSP_API_CONFIG), - MPUI1610_SHOW(EMIFF_SDRAM_CONFIG), - MPUI1610_SHOW(EMIFS_CONFIG)); - } - - g_read_completed++; - } else if (g_read_completed >= 1) { - *eof = 1; - return 0; - } - g_read_completed++; - - *my_first_byte = page_buffer; - return my_buffer_offset; -} - -static void omap_pm_init_proc(void) -{ - struct proc_dir_entry *entry; - - entry = create_proc_read_entry("driver/omap_pm", - S_IWUSR | S_IRUGO, NULL, - omap_pm_read_proc, NULL); -} - -#endif /* DEBUG && CONFIG_PROC_FS */ - -/* - * omap_pm_prepare - Do preliminary suspend work. - * @state: suspend state we're entering. - * - */ -//#include <asm/hardware.h> - -static int omap_pm_prepare(suspend_state_t state) -{ - int error = 0; - - switch (state) - { - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - break; - - case PM_SUSPEND_DISK: - return -ENOTSUPP; - - default: - return -EINVAL; - } - - return error; -} - - -/* - * omap_pm_enter - Actually enter a sleep state. - * @state: State we're entering. - * - */ - -static int omap_pm_enter(suspend_state_t state) -{ - switch (state) - { - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - omap_pm_suspend(); - break; - - case PM_SUSPEND_DISK: - return -ENOTSUPP; - - default: - return -EINVAL; - } - - return 0; -} - - -/** - * omap_pm_finish - Finish up suspend sequence. - * @state: State we're coming out of. - * - * This is called after we wake back up (or if entering the sleep state - * failed). - */ - -static int omap_pm_finish(suspend_state_t state) -{ - return 0; -} - - -static irqreturn_t omap_wakeup_interrupt(int irq, void * dev, - struct pt_regs * regs) -{ - return IRQ_HANDLED; -} - -static struct irqaction omap_wakeup_irq = { - .name = "peripheral wakeup", - .flags = IRQF_DISABLED, - .handler = omap_wakeup_interrupt -}; - - - -static struct pm_ops omap_pm_ops ={ - .pm_disk_mode = 0, - .prepare = omap_pm_prepare, - .enter = omap_pm_enter, - .finish = omap_pm_finish, -}; - -static int __init omap_pm_init(void) -{ - printk("Power Management for TI OMAP.\n"); - /* - * We copy the assembler sleep/wakeup routines to SRAM. - * These routines need to be in SRAM as that's the only - * memory the MPU can see when it wakes up. - */ - if (cpu_is_omap730()) { - omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend, - omap730_idle_loop_suspend_sz); - omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, - omap730_cpu_suspend_sz); - } else if (cpu_is_omap1510()) { - omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend, - omap1510_idle_loop_suspend_sz); - omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, - omap1510_cpu_suspend_sz); - } else if (cpu_is_omap16xx()) { - omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend, - omap1610_idle_loop_suspend_sz); - omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend, - omap1610_cpu_suspend_sz); - } - - if (omap_sram_idle == NULL || omap_sram_suspend == NULL) { - printk(KERN_ERR "PM not initialized: Missing SRAM support\n"); - return -ENODEV; - } - - pm_idle = omap_pm_idle; - - if (cpu_is_omap730()) - setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); - else if (cpu_is_omap16xx()) - setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); - -#if 0 - /* --- BEGIN BOARD-DEPENDENT CODE --- */ - /* Sleepx mask direction */ - omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008); - /* Unmask sleepx signal */ - omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); - /* --- END BOARD-DEPENDENT CODE --- */ -#endif - - /* Program new power ramp-up time - * (0 for most boards since we don't lower voltage when in deep sleep) - */ - omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3); - - /* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */ - omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); - - /* Configure IDLECT3 */ - if (cpu_is_omap730()) - omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3); - else if (cpu_is_omap16xx()) - omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); - - pm_set_ops(&omap_pm_ops); - -#if defined(DEBUG) && defined(CONFIG_PROC_FS) - omap_pm_init_proc(); -#endif - - if (cpu_is_omap16xx()) { - /* configure LOW_PWR pin */ - omap_cfg_reg(T20_1610_LOW_PWR); - } - - return 0; -} -__initcall(omap_pm_init); - diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index e75718301b0..19014b2ff4c 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -174,10 +174,7 @@ void __init omap_map_sram(void) if (cpu_is_omap24xx()) { omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA; - if (is_sram_locked()) - base = OMAP2_SRAM_PUB_PA; - else - base = OMAP2_SRAM_PA; + base = OMAP2_SRAM_PA; base = ROUND_DOWN(base, PAGE_SIZE); omap_sram_io_desc[0].pfn = __phys_to_pfn(base); } diff --git a/arch/arm/plat-omap/timer32k.c b/arch/arm/plat-omap/timer32k.c index 281ecc7fcdf..cf6df3378d3 100644 --- a/arch/arm/plat-omap/timer32k.c +++ b/arch/arm/plat-omap/timer32k.c @@ -105,6 +105,8 @@ static inline unsigned long omap_32k_timer_read(int reg) static inline void omap_32k_timer_start(unsigned long load_val) { + if (!load_val) + load_val = 1; omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR); omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR); } @@ -192,14 +194,11 @@ unsigned long long sched_clock(void) * issues with dynamic tick. In the dynamic tick case, we need to lock * with irqsave. */ -static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, - struct pt_regs *regs) +static inline irqreturn_t _omap_32k_timer_interrupt(int irq, void *dev_id, + struct pt_regs *regs) { - unsigned long flags; unsigned long now; - write_seqlock_irqsave(&xtime_lock, flags); - omap_32k_timer_ack_irq(); now = omap_32k_sync_timer_read(); @@ -215,6 +214,23 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, * continuous timer can be overridden from pm_idle to be longer. */ omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now); + + return IRQ_HANDLED; +} + +static irqreturn_t omap_32k_timer_handler(int irq, void *dev_id, + struct pt_regs *regs) +{ + return _omap_32k_timer_interrupt(irq, dev_id, regs); +} + +static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + unsigned long flags; + + write_seqlock_irqsave(&xtime_lock, flags); + _omap_32k_timer_interrupt(irq, dev_id, regs); write_sequnlock_irqrestore(&xtime_lock, flags); return IRQ_HANDLED; @@ -230,7 +246,15 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, */ void omap_32k_timer_reprogram(unsigned long next_tick) { - omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1); + unsigned long ticks = JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1; + unsigned long now = omap_32k_sync_timer_read(); + unsigned long idled = now - omap_32k_last_tick; + + if (idled + 1 < ticks) + ticks -= idled; + else + ticks = 1; + omap_32k_timer_start(ticks); } static struct irqaction omap_32k_timer_irq; @@ -252,7 +276,7 @@ static struct dyn_tick_timer omap_dyn_tick_timer = { .enable = omap_32k_timer_enable_dyn_tick, .disable = omap_32k_timer_disable_dyn_tick, .reprogram = omap_32k_timer_reprogram, - .handler = omap_32k_timer_interrupt, + .handler = omap_32k_timer_handler, }; #endif /* CONFIG_NO_IDLE_HZ */ diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index e1372a25311..b02af1d740f 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon Jun 26 22:26:08 2006 +# Last update: Sat Sep 23 13:20:43 2006 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -329,7 +329,7 @@ nimbra29x ARCH_NIMBRA29X NIMBRA29X 311 nimbra210 ARCH_NIMBRA210 NIMBRA210 312 hhp_d95xx ARCH_HHP_D95XX HHP_D95XX 313 labarm ARCH_LABARM LABARM 314 -comcerto ARCH_M825XX M825XX 315 +m825xx ARCH_M825XX M825XX 315 m7100 SA1100_M7100 M7100 316 nipc2 ARCH_NIPC2 NIPC2 317 fu7202 ARCH_FU7202 FU7202 318 @@ -857,12 +857,12 @@ osiris MACH_OSIRIS OSIRIS 842 maestro MACH_MAESTRO MAESTRO 843 tunge2 MACH_TUNGE2 TUNGE2 844 ixbbm MACH_IXBBM IXBBM 845 -mx27ads MACH_MX27 MX27 846 +mx27ads MACH_MX27ADS MX27ADS 846 ax8004 MACH_AX8004 AX8004 847 at91sam9261ek MACH_AT91SAM9261EK AT91SAM9261EK 848 loft MACH_LOFT LOFT 849 magpie MACH_MAGPIE MAGPIE 850 -mx21ads MACH_MX21 MX21 851 +mx21ads MACH_MX21ADS MX21ADS 851 mb87m3400 MACH_MB87M3400 MB87M3400 852 mguard_delta MACH_MGUARD_DELTA MGUARD_DELTA 853 davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_DVDP 854 @@ -1058,7 +1058,7 @@ akai9307 MACH_AKAI9307 AKAI9307 1044 fontaine MACH_FONTAINE FONTAINE 1045 wombat MACH_WOMBAT WOMBAT 1046 acq300 MACH_ACQ300 ACQ300 1047 -mod_270 MACH_MOD_270 MOD_270 1048 +mod272 MACH_MOD_270 MOD_270 1048 vmc_vc0820 MACH_VC0820 VC0820 1049 ani_aim MACH_ANI_AIM ANI_AIM 1050 jellyfish MACH_JELLYFISH JELLYFISH 1051 @@ -1093,3 +1093,67 @@ msm6100 MACH_MSM6100 MSM6100 1079 eti_b1 MACH_ETI_B1 ETI_B1 1080 za9l_series MACH_ZILOG_ZA9L ZILOG_ZA9L 1081 bit2440 MACH_BIT2440 BIT2440 1082 +nbi MACH_NBI NBI 1083 +smdk2443 MACH_SMDK2443 SMDK2443 1084 +vdavinci MACH_VDAVINCI VDAVINCI 1085 +atc6 MACH_ATC6 ATC6 1086 +multmdw MACH_MULTMDW MULTMDW 1087 +mba2440 MACH_MBA2440 MBA2440 1088 +ecsd MACH_ECSD ECSD 1089 +zire31 MACH_ZIRE31 ZIRE31 1090 +fsg MACH_FSG FSG 1091 +razor101 MACH_RAZOR101 RAZOR101 1092 +opera_tdm MACH_OPERA_TDM OPERA_TDM 1093 +comcerto MACH_COMCERTO COMCERTO 1094 +tb0319 MACH_TB0319 TB0319 1095 +kws8000 MACH_KWS8000 KWS8000 1096 +b2 MACH_B2 B2 1097 +lcl54 MACH_LCL54 LCL54 1098 +at91sam9260ek MACH_AT91SAM9260EK AT91SAM9260EK 1099 +glantank MACH_GLANTANK GLANTANK 1100 +n2100 MACH_N2100 N2100 1101 +n4100 MACH_N4100 N4100 1102 +rsc4 MACH_VERTICAL_RSC4 VERTICAL_RSC4 1103 +sg8100 MACH_SG8100 SG8100 1104 +im42xx MACH_IM42XX IM42XX 1105 +ftxx MACH_FTXX FTXX 1106 +lwfusion MACH_LWFUSION LWFUSION 1107 +qt2410 MACH_QT2410 QT2410 1108 +kixrp435 MACH_KIXRP435 KIXRP435 1109 +ccw9c MACH_CCW9C CCW9C 1110 +dabhs MACH_DABHS DABHS 1111 +gzmx MACH_GZMX GZMX 1112 +ipnw100ap MACH_IPNW100AP IPNW100AP 1113 +cc9p9360dev MACH_CC9P9360DEV CC9P9360DEV 1114 +cc9p9750dev MACH_CC9P9750DEV CC9P9750DEV 1115 +cc9p9360val MACH_CC9P9360VAL CC9P9360VAL 1116 +cc9p9750val MACH_CC9P9750VAL CC9P9750VAL 1117 +nx70v MACH_NX70V NX70V 1118 +at91rm9200df MACH_AT91RM9200DF AT91RM9200DF 1119 +se_pilot2 MACH_SE_PILOT2 SE_PILOT2 1120 +mtcn_t800 MACH_MTCN_T800 MTCN_T800 1121 +vcmx212 MACH_VCMX212 VCMX212 1122 +lynx MACH_LYNX LYNX 1123 +at91sam9260id MACH_AT91SAM9260ID AT91SAM9260ID 1124 +hw86052 MACH_HW86052 HW86052 1125 +pilz_pmi3 MACH_PILZ_PMI3 PILZ_PMI3 1126 +edb9302a MACH_EDB9302A EDB9302A 1127 +edb9307a MACH_EDB9307A EDB9307A 1128 +ct_dfs MACH_CT_DFS CT_DFS 1129 +pilz_pmi4 MACH_PILZ_PMI4 PILZ_PMI4 1130 +xceednp_ixp MACH_XCEEDNP_IXP XCEEDNP_IXP 1131 +smdk2442b MACH_SMDK2442B SMDK2442B 1132 +xnode MACH_XNODE XNODE 1133 +aidx270 MACH_AIDX270 AIDX270 1134 +rema MACH_REMA REMA 1135 +bps1000 MACH_BPS1000 BPS1000 1136 +hw90350 MACH_HW90350 HW90350 1137 +omap_sdp3430 MACH_OMAP_SDP3430 OMAP_SDP3430 1138 +bluetouch MACH_BLUETOUCH BLUETOUCH 1139 +vstms MACH_VSTMS VSTMS 1140 +xsbase270 MACH_XSBASE270 XSBASE270 1141 +at91sam9260ek_cn MACH_AT91SAM9260EK_CN AT91SAM9260EK_CN 1142 +adsturboxb MACH_ADSTURBOXB ADSTURBOXB 1143 +oti4110 MACH_OTI4110 OTI4110 1144 +hme_pxa MACH_HME_PXA HME_PXA 1145 +deisterdca MACH_DEISTERDCA DEISTERDCA 1146 diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h index 96fdf30f6a3..f2797896e6d 100644 --- a/arch/arm/vfp/vfp.h +++ b/arch/arm/vfp/vfp.h @@ -355,3 +355,18 @@ u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand); * we check for an error. */ #define VFP_EXCEPTION_ERROR ((u32)-1 & ~VFP_NAN_FLAG) + +/* + * A flag to tell vfp instruction type. + * OP_SCALAR - this operation always operates in scalar mode + * OP_SD - the instruction exceptionally writes to a single precision result. + * OP_DD - the instruction exceptionally writes to a double precision result. + */ +#define OP_SCALAR (1 << 0) +#define OP_SD (1 << 1) +#define OP_DD (1 << 1) + +struct op { + u32 (* const fn)(int dd, int dn, int dm, u32 fpscr); + u32 flags; +}; diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c index add48e36c2d..4fc05ee0a2e 100644 --- a/arch/arm/vfp/vfpdouble.c +++ b/arch/arm/vfp/vfpdouble.c @@ -659,22 +659,22 @@ static u32 vfp_double_ftosiz(int dd, int unused, int dm, u32 fpscr) } -static u32 (* const fop_extfns[32])(int dd, int unused, int dm, u32 fpscr) = { - [FEXT_TO_IDX(FEXT_FCPY)] = vfp_double_fcpy, - [FEXT_TO_IDX(FEXT_FABS)] = vfp_double_fabs, - [FEXT_TO_IDX(FEXT_FNEG)] = vfp_double_fneg, - [FEXT_TO_IDX(FEXT_FSQRT)] = vfp_double_fsqrt, - [FEXT_TO_IDX(FEXT_FCMP)] = vfp_double_fcmp, - [FEXT_TO_IDX(FEXT_FCMPE)] = vfp_double_fcmpe, - [FEXT_TO_IDX(FEXT_FCMPZ)] = vfp_double_fcmpz, - [FEXT_TO_IDX(FEXT_FCMPEZ)] = vfp_double_fcmpez, - [FEXT_TO_IDX(FEXT_FCVT)] = vfp_double_fcvts, - [FEXT_TO_IDX(FEXT_FUITO)] = vfp_double_fuito, - [FEXT_TO_IDX(FEXT_FSITO)] = vfp_double_fsito, - [FEXT_TO_IDX(FEXT_FTOUI)] = vfp_double_ftoui, - [FEXT_TO_IDX(FEXT_FTOUIZ)] = vfp_double_ftouiz, - [FEXT_TO_IDX(FEXT_FTOSI)] = vfp_double_ftosi, - [FEXT_TO_IDX(FEXT_FTOSIZ)] = vfp_double_ftosiz, +static struct op fops_ext[32] = { + [FEXT_TO_IDX(FEXT_FCPY)] = { vfp_double_fcpy, 0 }, + [FEXT_TO_IDX(FEXT_FABS)] = { vfp_double_fabs, 0 }, + [FEXT_TO_IDX(FEXT_FNEG)] = { vfp_double_fneg, 0 }, + [FEXT_TO_IDX(FEXT_FSQRT)] = { vfp_double_fsqrt, 0 }, + [FEXT_TO_IDX(FEXT_FCMP)] = { vfp_double_fcmp, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCMPE)] = { vfp_double_fcmpe, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCMPZ)] = { vfp_double_fcmpz, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCMPEZ)] = { vfp_double_fcmpez, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCVT)] = { vfp_double_fcvts, OP_SCALAR|OP_SD }, + [FEXT_TO_IDX(FEXT_FUITO)] = { vfp_double_fuito, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FSITO)] = { vfp_double_fsito, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FTOUI)] = { vfp_double_ftoui, OP_SCALAR|OP_SD }, + [FEXT_TO_IDX(FEXT_FTOUIZ)] = { vfp_double_ftouiz, OP_SCALAR|OP_SD }, + [FEXT_TO_IDX(FEXT_FTOSI)] = { vfp_double_ftosi, OP_SCALAR|OP_SD }, + [FEXT_TO_IDX(FEXT_FTOSIZ)] = { vfp_double_ftosiz, OP_SCALAR|OP_SD }, }; @@ -1108,16 +1108,16 @@ static u32 vfp_double_fdiv(int dd, int dn, int dm, u32 fpscr) return FPSCR_IOC; } -static u32 (* const fop_fns[16])(int dd, int dn, int dm, u32 fpscr) = { - [FOP_TO_IDX(FOP_FMAC)] = vfp_double_fmac, - [FOP_TO_IDX(FOP_FNMAC)] = vfp_double_fnmac, - [FOP_TO_IDX(FOP_FMSC)] = vfp_double_fmsc, - [FOP_TO_IDX(FOP_FNMSC)] = vfp_double_fnmsc, - [FOP_TO_IDX(FOP_FMUL)] = vfp_double_fmul, - [FOP_TO_IDX(FOP_FNMUL)] = vfp_double_fnmul, - [FOP_TO_IDX(FOP_FADD)] = vfp_double_fadd, - [FOP_TO_IDX(FOP_FSUB)] = vfp_double_fsub, - [FOP_TO_IDX(FOP_FDIV)] = vfp_double_fdiv, +static struct op fops[16] = { + [FOP_TO_IDX(FOP_FMAC)] = { vfp_double_fmac, 0 }, + [FOP_TO_IDX(FOP_FNMAC)] = { vfp_double_fnmac, 0 }, + [FOP_TO_IDX(FOP_FMSC)] = { vfp_double_fmsc, 0 }, + [FOP_TO_IDX(FOP_FNMSC)] = { vfp_double_fnmsc, 0 }, + [FOP_TO_IDX(FOP_FMUL)] = { vfp_double_fmul, 0 }, + [FOP_TO_IDX(FOP_FNMUL)] = { vfp_double_fnmul, 0 }, + [FOP_TO_IDX(FOP_FADD)] = { vfp_double_fadd, 0 }, + [FOP_TO_IDX(FOP_FSUB)] = { vfp_double_fsub, 0 }, + [FOP_TO_IDX(FOP_FDIV)] = { vfp_double_fdiv, 0 }, }; #define FREG_BANK(x) ((x) & 0x0c) @@ -1131,69 +1131,60 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr) unsigned int dn = vfp_get_dn(inst); unsigned int dm = vfp_get_dm(inst); unsigned int vecitr, veclen, vecstride; - u32 (*fop)(int, int, s32, u32); + struct op *fop; - veclen = fpscr & FPSCR_LENGTH_MASK; vecstride = (1 + ((fpscr & FPSCR_STRIDE_MASK) == FPSCR_STRIDE_MASK)) * 2; + fop = (op == FOP_EXT) ? &fops_ext[FEXT_TO_IDX(inst)] : &fops[FOP_TO_IDX(op)]; + /* * fcvtds takes an sN register number as destination, not dN. * It also always operates on scalars. */ - if ((inst & FEXT_MASK) == FEXT_FCVT) { - veclen = 0; + if (fop->flags & OP_SD) dest = vfp_get_sd(inst); - } else + else dest = vfp_get_dd(inst); /* * If destination bank is zero, vector length is always '1'. * ARM DDI0100F C5.1.3, C5.3.2. */ - if (FREG_BANK(dest) == 0) + if ((fop->flags & OP_SCALAR) || (FREG_BANK(dest) == 0)) veclen = 0; + else + veclen = fpscr & FPSCR_LENGTH_MASK; pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride, (veclen >> FPSCR_LENGTH_BIT) + 1); - fop = (op == FOP_EXT) ? fop_extfns[FEXT_TO_IDX(inst)] : fop_fns[FOP_TO_IDX(op)]; - if (!fop) + if (!fop->fn) goto invalid; for (vecitr = 0; vecitr <= veclen; vecitr += 1 << FPSCR_LENGTH_BIT) { u32 except; + char type; - if (op == FOP_EXT && (inst & FEXT_MASK) == FEXT_FCVT) - pr_debug("VFP: itr%d (s%u) = op[%u] (d%u)\n", - vecitr >> FPSCR_LENGTH_BIT, - dest, dn, dm); - else if (op == FOP_EXT) - pr_debug("VFP: itr%d (d%u) = op[%u] (d%u)\n", + type = fop->flags & OP_SD ? 's' : 'd'; + if (op == FOP_EXT) + pr_debug("VFP: itr%d (%c%u) = op[%u] (d%u)\n", vecitr >> FPSCR_LENGTH_BIT, - dest, dn, dm); + type, dest, dn, dm); else - pr_debug("VFP: itr%d (d%u) = (d%u) op[%u] (d%u)\n", + pr_debug("VFP: itr%d (%c%u) = (d%u) op[%u] (d%u)\n", vecitr >> FPSCR_LENGTH_BIT, - dest, dn, FOP_TO_IDX(op), dm); + type, dest, dn, FOP_TO_IDX(op), dm); - except = fop(dest, dn, dm, fpscr); + except = fop->fn(dest, dn, dm, fpscr); pr_debug("VFP: itr%d: exceptions=%08x\n", vecitr >> FPSCR_LENGTH_BIT, except); exceptions |= except; /* - * This ensures that comparisons only operate on scalars; - * comparisons always return with one FPSCR status bit set. - */ - if (except & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V)) - break; - - /* * CHECK: It appears to be undefined whether we stop when * we encounter an exception. We continue. */ - dest = FREG_BANK(dest) + ((FREG_IDX(dest) + vecstride) & 6); dn = FREG_BANK(dn) + ((FREG_IDX(dn) + vecstride) & 6); if (FREG_BANK(dm) != 0) diff --git a/arch/arm/vfp/vfpinstr.h b/arch/arm/vfp/vfpinstr.h index 6c819aeae00..7f343a4beca 100644 --- a/arch/arm/vfp/vfpinstr.h +++ b/arch/arm/vfp/vfpinstr.h @@ -73,14 +73,14 @@ #define fmrx(_vfp_) ({ \ u32 __v; \ - asm("mrc%? p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmrx %0, " #_vfp_ \ - : "=r" (__v)); \ + asm("mrc p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmrx %0, " #_vfp_ \ + : "=r" (__v) : : "cc"); \ __v; \ }) #define fmxr(_vfp_,_var_) \ - asm("mcr%? p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr " #_vfp_ ", %0" \ - : : "r" (_var_)) + asm("mcr p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr " #_vfp_ ", %0" \ + : : "r" (_var_) : "cc") u32 vfp_single_cpdo(u32 inst, u32 fpscr); u32 vfp_single_cprt(u32 inst, u32 fpscr, struct pt_regs *regs); diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 4178f6cc3d3..dedbb449632 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -40,10 +40,19 @@ unsigned int VFP_arch; static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) { struct thread_info *thread = v; - union vfp_state *vfp = &thread->vfpstate; + union vfp_state *vfp; - switch (cmd) { - case THREAD_NOTIFY_FLUSH: + if (likely(cmd == THREAD_NOTIFY_SWITCH)) { + /* + * Always disable VFP so we can lazily save/restore the + * old state. + */ + fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE); + return NOTIFY_DONE; + } + + vfp = &thread->vfpstate; + if (cmd == THREAD_NOTIFY_FLUSH) { /* * Per-thread VFP initialisation. */ @@ -56,29 +65,12 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) * Disable VFP to ensure we initialise it first. */ fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE); - - /* - * FALLTHROUGH: Ensure we don't try to overwrite our newly - * initialised state information on the first fault. - */ - - case THREAD_NOTIFY_RELEASE: - /* - * Per-thread VFP cleanup. - */ - if (last_VFP_context == vfp) - last_VFP_context = NULL; - break; - - case THREAD_NOTIFY_SWITCH: - /* - * Always disable VFP so we can lazily save/restore the - * old state. - */ - fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE); - break; } + /* flush and release case: Per-thread VFP cleanup. */ + if (last_VFP_context == vfp) + last_VFP_context = NULL; + return NOTIFY_DONE; } diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c index 8f6c179cafb..ab5e9503bae 100644 --- a/arch/arm/vfp/vfpsingle.c +++ b/arch/arm/vfp/vfpsingle.c @@ -702,22 +702,22 @@ static u32 vfp_single_ftosiz(int sd, int unused, s32 m, u32 fpscr) return vfp_single_ftosi(sd, unused, m, FPSCR_ROUND_TOZERO); } -static u32 (* const fop_extfns[32])(int sd, int unused, s32 m, u32 fpscr) = { - [FEXT_TO_IDX(FEXT_FCPY)] = vfp_single_fcpy, - [FEXT_TO_IDX(FEXT_FABS)] = vfp_single_fabs, - [FEXT_TO_IDX(FEXT_FNEG)] = vfp_single_fneg, - [FEXT_TO_IDX(FEXT_FSQRT)] = vfp_single_fsqrt, - [FEXT_TO_IDX(FEXT_FCMP)] = vfp_single_fcmp, - [FEXT_TO_IDX(FEXT_FCMPE)] = vfp_single_fcmpe, - [FEXT_TO_IDX(FEXT_FCMPZ)] = vfp_single_fcmpz, - [FEXT_TO_IDX(FEXT_FCMPEZ)] = vfp_single_fcmpez, - [FEXT_TO_IDX(FEXT_FCVT)] = vfp_single_fcvtd, - [FEXT_TO_IDX(FEXT_FUITO)] = vfp_single_fuito, - [FEXT_TO_IDX(FEXT_FSITO)] = vfp_single_fsito, - [FEXT_TO_IDX(FEXT_FTOUI)] = vfp_single_ftoui, - [FEXT_TO_IDX(FEXT_FTOUIZ)] = vfp_single_ftouiz, - [FEXT_TO_IDX(FEXT_FTOSI)] = vfp_single_ftosi, - [FEXT_TO_IDX(FEXT_FTOSIZ)] = vfp_single_ftosiz, +static struct op fops_ext[32] = { + [FEXT_TO_IDX(FEXT_FCPY)] = { vfp_single_fcpy, 0 }, + [FEXT_TO_IDX(FEXT_FABS)] = { vfp_single_fabs, 0 }, + [FEXT_TO_IDX(FEXT_FNEG)] = { vfp_single_fneg, 0 }, + [FEXT_TO_IDX(FEXT_FSQRT)] = { vfp_single_fsqrt, 0 }, + [FEXT_TO_IDX(FEXT_FCMP)] = { vfp_single_fcmp, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCMPE)] = { vfp_single_fcmpe, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCMPZ)] = { vfp_single_fcmpz, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCMPEZ)] = { vfp_single_fcmpez, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCVT)] = { vfp_single_fcvtd, OP_SCALAR|OP_DD }, + [FEXT_TO_IDX(FEXT_FUITO)] = { vfp_single_fuito, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FSITO)] = { vfp_single_fsito, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FTOUI)] = { vfp_single_ftoui, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FTOUIZ)] = { vfp_single_ftouiz, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FTOSI)] = { vfp_single_ftosi, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FTOSIZ)] = { vfp_single_ftosiz, OP_SCALAR }, }; @@ -1151,16 +1151,16 @@ static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr) return FPSCR_IOC; } -static u32 (* const fop_fns[16])(int sd, int sn, s32 m, u32 fpscr) = { - [FOP_TO_IDX(FOP_FMAC)] = vfp_single_fmac, - [FOP_TO_IDX(FOP_FNMAC)] = vfp_single_fnmac, - [FOP_TO_IDX(FOP_FMSC)] = vfp_single_fmsc, - [FOP_TO_IDX(FOP_FNMSC)] = vfp_single_fnmsc, - [FOP_TO_IDX(FOP_FMUL)] = vfp_single_fmul, - [FOP_TO_IDX(FOP_FNMUL)] = vfp_single_fnmul, - [FOP_TO_IDX(FOP_FADD)] = vfp_single_fadd, - [FOP_TO_IDX(FOP_FSUB)] = vfp_single_fsub, - [FOP_TO_IDX(FOP_FDIV)] = vfp_single_fdiv, +static struct op fops[16] = { + [FOP_TO_IDX(FOP_FMAC)] = { vfp_single_fmac, 0 }, + [FOP_TO_IDX(FOP_FNMAC)] = { vfp_single_fnmac, 0 }, + [FOP_TO_IDX(FOP_FMSC)] = { vfp_single_fmsc, 0 }, + [FOP_TO_IDX(FOP_FNMSC)] = { vfp_single_fnmsc, 0 }, + [FOP_TO_IDX(FOP_FMUL)] = { vfp_single_fmul, 0 }, + [FOP_TO_IDX(FOP_FNMUL)] = { vfp_single_fnmul, 0 }, + [FOP_TO_IDX(FOP_FADD)] = { vfp_single_fadd, 0 }, + [FOP_TO_IDX(FOP_FSUB)] = { vfp_single_fsub, 0 }, + [FOP_TO_IDX(FOP_FDIV)] = { vfp_single_fdiv, 0 }, }; #define FREG_BANK(x) ((x) & 0x18) @@ -1174,70 +1174,63 @@ u32 vfp_single_cpdo(u32 inst, u32 fpscr) unsigned int sn = vfp_get_sn(inst); unsigned int sm = vfp_get_sm(inst); unsigned int vecitr, veclen, vecstride; - u32 (*fop)(int, int, s32, u32); + struct op *fop; - veclen = fpscr & FPSCR_LENGTH_MASK; vecstride = 1 + ((fpscr & FPSCR_STRIDE_MASK) == FPSCR_STRIDE_MASK); + fop = (op == FOP_EXT) ? &fops_ext[FEXT_TO_IDX(inst)] : &fops[FOP_TO_IDX(op)]; + /* * fcvtsd takes a dN register number as destination, not sN. * Technically, if bit 0 of dd is set, this is an invalid * instruction. However, we ignore this for efficiency. * It also only operates on scalars. */ - if ((inst & FEXT_MASK) == FEXT_FCVT) { - veclen = 0; + if (fop->flags & OP_DD) dest = vfp_get_dd(inst); - } else + else dest = vfp_get_sd(inst); /* * If destination bank is zero, vector length is always '1'. * ARM DDI0100F C5.1.3, C5.3.2. */ - if (FREG_BANK(dest) == 0) + if ((fop->flags & OP_SCALAR) || FREG_BANK(dest) == 0) veclen = 0; + else + veclen = fpscr & FPSCR_LENGTH_MASK; pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride, (veclen >> FPSCR_LENGTH_BIT) + 1); - fop = (op == FOP_EXT) ? fop_extfns[FEXT_TO_IDX(inst)] : fop_fns[FOP_TO_IDX(op)]; - if (!fop) + if (!fop->fn) goto invalid; for (vecitr = 0; vecitr <= veclen; vecitr += 1 << FPSCR_LENGTH_BIT) { s32 m = vfp_get_float(sm); u32 except; + char type; - if (op == FOP_EXT && (inst & FEXT_MASK) == FEXT_FCVT) - pr_debug("VFP: itr%d (d%u) = op[%u] (s%u=%08x)\n", - vecitr >> FPSCR_LENGTH_BIT, dest, sn, sm, m); - else if (op == FOP_EXT) - pr_debug("VFP: itr%d (s%u) = op[%u] (s%u=%08x)\n", - vecitr >> FPSCR_LENGTH_BIT, dest, sn, sm, m); + type = fop->flags & OP_DD ? 'd' : 's'; + if (op == FOP_EXT) + pr_debug("VFP: itr%d (%c%u) = op[%u] (s%u=%08x)\n", + vecitr >> FPSCR_LENGTH_BIT, type, dest, sn, + sm, m); else - pr_debug("VFP: itr%d (s%u) = (s%u) op[%u] (s%u=%08x)\n", - vecitr >> FPSCR_LENGTH_BIT, dest, sn, + pr_debug("VFP: itr%d (%c%u) = (s%u) op[%u] (s%u=%08x)\n", + vecitr >> FPSCR_LENGTH_BIT, type, dest, sn, FOP_TO_IDX(op), sm, m); - except = fop(dest, sn, m, fpscr); + except = fop->fn(dest, sn, m, fpscr); pr_debug("VFP: itr%d: exceptions=%08x\n", vecitr >> FPSCR_LENGTH_BIT, except); exceptions |= except; /* - * This ensures that comparisons only operate on scalars; - * comparisons always return with one FPSCR status bit set. - */ - if (except & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V)) - break; - - /* * CHECK: It appears to be undefined whether we stop when * we encounter an exception. We continue. */ - dest = FREG_BANK(dest) + ((FREG_IDX(dest) + vecstride) & 7); sn = FREG_BANK(sn) + ((FREG_IDX(sn) + vecstride) & 7); if (FREG_BANK(sm) != 0) |