Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 597 insertions, 0 deletions

diff --git a/drivers/acpi/dispatcher/dsmethod.c b/drivers/acpi/dispatcher/dsmethod.c
new file mode 100644
index 00000000000..9f0456cb9bb
--- /dev/null
+++ b/drivers/acpi/dispatcher/dsmethod.c
@@ -0,0 +1,597 @@
+/******************************************************************************
+ *
+ * Module Name: dsmethod - Parser/Interpreter interface - control method parsing
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acparser.h>
+#include <acpi/amlcode.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+#include <acpi/acnamesp.h>
+
+
+#define _COMPONENT          ACPI_DISPATCHER
+	 ACPI_MODULE_NAME    ("dsmethod")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_parse_method
+ *
+ * PARAMETERS:  obj_handle      - Method node
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Call the parser and parse the AML that is associated with the
+ *              method.
+ *
+ * MUTEX:       Assumes parser is locked
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_parse_method (
+	acpi_handle                     obj_handle)
+{
+	acpi_status                     status;
+	union acpi_operand_object       *obj_desc;
+	union acpi_parse_object         *op;
+	struct acpi_namespace_node      *node;
+	acpi_owner_id                   owner_id;
+	struct acpi_walk_state          *walk_state;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_parse_method", obj_handle);
+
+
+	/* Parameter Validation */
+
+	if (!obj_handle) {
+		return_ACPI_STATUS (AE_NULL_ENTRY);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "**** Parsing [%4.4s] **** named_obj=%p\n",
+		acpi_ut_get_node_name (obj_handle), obj_handle));
+
+	/* Extract the method object from the method Node */
+
+	node = (struct acpi_namespace_node *) obj_handle;
+	obj_desc = acpi_ns_get_attached_object (node);
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_NULL_OBJECT);
+	}
+
+	/* Create a mutex for the method if there is a concurrency limit */
+
+	if ((obj_desc->method.concurrency != ACPI_INFINITE_CONCURRENCY) &&
+		(!obj_desc->method.semaphore)) {
+		status = acpi_os_create_semaphore (obj_desc->method.concurrency,
+				   obj_desc->method.concurrency,
+				   &obj_desc->method.semaphore);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+	}
+
+	/*
+	 * Allocate a new parser op to be the root of the parsed
+	 * method tree
+	 */
+	op = acpi_ps_alloc_op (AML_METHOD_OP);
+	if (!op) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	/* Init new op with the method name and pointer back to the Node */
+
+	acpi_ps_set_name (op, node->name.integer);
+	op->common.node = node;
+
+	/*
+	 * Get a new owner_id for objects created by this method. Namespace
+	 * objects (such as Operation Regions) can be created during the
+	 * first pass parse.
+	 */
+	owner_id = acpi_ut_allocate_owner_id (ACPI_OWNER_TYPE_METHOD);
+	obj_desc->method.owning_id = owner_id;
+
+	/* Create and initialize a new walk state */
+
+	walk_state = acpi_ds_create_walk_state (owner_id, NULL, NULL, NULL);
+	if (!walk_state) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	status = acpi_ds_init_aml_walk (walk_state, op, node,
+			  obj_desc->method.aml_start,
+			  obj_desc->method.aml_length, NULL, 1);
+	if (ACPI_FAILURE (status)) {
+		acpi_ds_delete_walk_state (walk_state);
+		return_ACPI_STATUS (status);
+	}
+
+	/*
+	 * Parse the method, first pass
+	 *
+	 * The first pass load is where newly declared named objects are
+	 * added into the namespace.  Actual evaluation of
+	 * the named objects (what would be called a "second
+	 * pass") happens during the actual execution of the
+	 * method so that operands to the named objects can
+	 * take on dynamic run-time values.
+	 */
+	status = acpi_ps_parse_aml (walk_state);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
+		"**** [%4.4s] Parsed **** named_obj=%p Op=%p\n",
+		acpi_ut_get_node_name (obj_handle), obj_handle, op));
+
+	acpi_ps_delete_parse_tree (op);
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_begin_method_execution
+ *
+ * PARAMETERS:  method_node         - Node of the method
+ *              obj_desc            - The method object
+ *              calling_method_node - Caller of this method (if non-null)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Prepare a method for execution.  Parses the method if necessary,
+ *              increments the thread count, and waits at the method semaphore
+ *              for clearance to execute.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_begin_method_execution (
+	struct acpi_namespace_node      *method_node,
+	union acpi_operand_object       *obj_desc,
+	struct acpi_namespace_node      *calling_method_node)
+{
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_begin_method_execution", method_node);
+
+
+	if (!method_node) {
+		return_ACPI_STATUS (AE_NULL_ENTRY);
+	}
+
+	/*
+	 * If there is a concurrency limit on this method, we need to
+	 * obtain a unit from the method semaphore.
+	 */
+	if (obj_desc->method.semaphore) {
+		/*
+		 * Allow recursive method calls, up to the reentrancy/concurrency
+		 * limit imposed by the SERIALIZED rule and the sync_level method
+		 * parameter.
+		 *
+		 * The point of this code is to avoid permanently blocking a
+		 * thread that is making recursive method calls.
+		 */
+		if (method_node == calling_method_node) {
+			if (obj_desc->method.thread_count >= obj_desc->method.concurrency) {
+				return_ACPI_STATUS (AE_AML_METHOD_LIMIT);
+			}
+		}
+
+		/*
+		 * Get a unit from the method semaphore. This releases the
+		 * interpreter if we block
+		 */
+		status = acpi_ex_system_wait_semaphore (obj_desc->method.semaphore,
+				 ACPI_WAIT_FOREVER);
+	}
+
+	/*
+	 * Increment the method parse tree thread count since it has been
+	 * reentered one more time (even if it is the same thread)
+	 */
+	obj_desc->method.thread_count++;
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_call_control_method
+ *
+ * PARAMETERS:  Thread              - Info for this thread
+ *              this_walk_state     - Current walk state
+ *              Op                  - Current Op to be walked
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Transfer execution to a called control method
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_call_control_method (
+	struct acpi_thread_state        *thread,
+	struct acpi_walk_state          *this_walk_state,
+	union acpi_parse_object         *op)
+{
+	acpi_status                     status;
+	struct acpi_namespace_node      *method_node;
+	struct acpi_walk_state          *next_walk_state;
+	union acpi_operand_object       *obj_desc;
+	struct acpi_parameter_info      info;
+	u32                             i;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_call_control_method", this_walk_state);
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Execute method %p, currentstate=%p\n",
+		this_walk_state->prev_op, this_walk_state));
+
+	/*
+	 * Get the namespace entry for the control method we are about to call
+	 */
+	method_node = this_walk_state->method_call_node;
+	if (!method_node) {
+		return_ACPI_STATUS (AE_NULL_ENTRY);
+	}
+
+	obj_desc = acpi_ns_get_attached_object (method_node);
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_NULL_OBJECT);
+	}
+
+	obj_desc->method.owning_id = acpi_ut_allocate_owner_id (ACPI_OWNER_TYPE_METHOD);
+
+	/* Init for new method, wait on concurrency semaphore */
+
+	status = acpi_ds_begin_method_execution (method_node, obj_desc,
+			  this_walk_state->method_node);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	if (!(obj_desc->method.method_flags & AML_METHOD_INTERNAL_ONLY)) {
+		/* 1) Parse: Create a new walk state for the preempting walk */
+
+		next_walk_state = acpi_ds_create_walk_state (obj_desc->method.owning_id,
+				  op, obj_desc, NULL);
+		if (!next_walk_state) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		/* Create and init a Root Node */
+
+		op = acpi_ps_create_scope_op ();
+		if (!op) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		status = acpi_ds_init_aml_walk (next_walk_state, op, method_node,
+				  obj_desc->method.aml_start, obj_desc->method.aml_length,
+				  NULL, 1);
+		if (ACPI_FAILURE (status)) {
+			acpi_ds_delete_walk_state (next_walk_state);
+			goto cleanup;
+		}
+
+		/* Begin AML parse */
+
+		status = acpi_ps_parse_aml (next_walk_state);
+		acpi_ps_delete_parse_tree (op);
+	}
+
+	/* 2) Execute: Create a new state for the preempting walk */
+
+	next_walk_state = acpi_ds_create_walk_state (obj_desc->method.owning_id,
+			  NULL, obj_desc, thread);
+	if (!next_walk_state) {
+		status = AE_NO_MEMORY;
+		goto cleanup;
+	}
+	/*
+	 * The resolved arguments were put on the previous walk state's operand
+	 * stack.  Operands on the previous walk state stack always
+	 * start at index 0.
+	 * Null terminate the list of arguments
+	 */
+	this_walk_state->operands [this_walk_state->num_operands] = NULL;
+
+	info.parameters = &this_walk_state->operands[0];
+	info.parameter_type = ACPI_PARAM_ARGS;
+
+	status = acpi_ds_init_aml_walk (next_walk_state, NULL, method_node,
+			  obj_desc->method.aml_start, obj_desc->method.aml_length,
+			  &info, 3);
+	if (ACPI_FAILURE (status)) {
+		goto cleanup;
+	}
+
+	/*
+	 * Delete the operands on the previous walkstate operand stack
+	 * (they were copied to new objects)
+	 */
+	for (i = 0; i < obj_desc->method.param_count; i++) {
+		acpi_ut_remove_reference (this_walk_state->operands [i]);
+		this_walk_state->operands [i] = NULL;
+	}
+
+	/* Clear the operand stack */
+
+	this_walk_state->num_operands = 0;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+		"Starting nested execution, newstate=%p\n", next_walk_state));
+
+	if (obj_desc->method.method_flags & AML_METHOD_INTERNAL_ONLY) {
+		status = obj_desc->method.implementation (next_walk_state);
+		return_ACPI_STATUS (status);
+	}
+
+	return_ACPI_STATUS (AE_OK);
+
+
+	/* On error, we must delete the new walk state */
+
+cleanup:
+	if (next_walk_state && (next_walk_state->method_desc)) {
+		/* Decrement the thread count on the method parse tree */
+
+	   next_walk_state->method_desc->method.thread_count--;
+	}
+	(void) acpi_ds_terminate_control_method (next_walk_state);
+	acpi_ds_delete_walk_state (next_walk_state);
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_restart_control_method
+ *
+ * PARAMETERS:  walk_state          - State for preempted method (caller)
+ *              return_desc         - Return value from the called method
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Restart a method that was preempted by another (nested) method
+ *              invocation.  Handle the return value (if any) from the callee.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_restart_control_method (
+	struct acpi_walk_state          *walk_state,
+	union acpi_operand_object       *return_desc)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_restart_control_method", walk_state);
+
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+		"****Restart [%4.4s] Op %p return_value_from_callee %p\n",
+		(char *) &walk_state->method_node->name, walk_state->method_call_op,
+		return_desc));
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+		"    return_from_this_method_used?=%X res_stack %p Walk %p\n",
+		walk_state->return_used,
+		walk_state->results, walk_state));
+
+	/* Did the called method return a value? */
+
+	if (return_desc) {
+		/* Are we actually going to use the return value? */
+
+		if (walk_state->return_used) {
+			/* Save the return value from the previous method */
+
+			status = acpi_ds_result_push (return_desc, walk_state);
+			if (ACPI_FAILURE (status)) {
+				acpi_ut_remove_reference (return_desc);
+				return_ACPI_STATUS (status);
+			}
+
+			/*
+			 * Save as THIS method's return value in case it is returned
+			 * immediately to yet another method
+			 */
+			walk_state->return_desc = return_desc;
+		}
+
+		/*
+		 * The following code is the
+		 * optional support for a so-called "implicit return". Some AML code
+		 * assumes that the last value of the method is "implicitly" returned
+		 * to the caller. Just save the last result as the return value.
+		 * NOTE: this is optional because the ASL language does not actually
+		 * support this behavior.
+		 */
+		else if (!acpi_ds_do_implicit_return (return_desc, walk_state, FALSE)) {
+			/*
+			 * Delete the return value if it will not be used by the
+			 * calling method
+			 */
+			acpi_ut_remove_reference (return_desc);
+		}
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_terminate_control_method
+ *
+ * PARAMETERS:  walk_state          - State of the method
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Terminate a control method.  Delete everything that the method
+ *              created, delete all locals and arguments, and delete the parse
+ *              tree if requested.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_terminate_control_method (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       *obj_desc;
+	struct acpi_namespace_node      *method_node;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_terminate_control_method", walk_state);
+
+
+	if (!walk_state) {
+		return (AE_BAD_PARAMETER);
+	}
+
+	/* The current method object was saved in the walk state */
+
+	obj_desc = walk_state->method_desc;
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/* Delete all arguments and locals */
+
+	acpi_ds_method_data_delete_all (walk_state);
+
+	/*
+	 * Lock the parser while we terminate this method.
+	 * If this is the last thread executing the method,
+	 * we have additional cleanup to perform
+	 */
+	status = acpi_ut_acquire_mutex (ACPI_MTX_PARSER);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* Signal completion of the execution of this method if necessary */
+
+	if (walk_state->method_desc->method.semaphore) {
+		status = acpi_os_signal_semaphore (
+				  walk_state->method_desc->method.semaphore, 1);
+		if (ACPI_FAILURE (status)) {
+			ACPI_REPORT_ERROR (("Could not signal method semaphore\n"));
+			status = AE_OK;
+
+			/* Ignore error and continue cleanup */
+		}
+	}
+
+	if (walk_state->method_desc->method.thread_count) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+			"*** Not deleting method namespace, there are still %d threads\n",
+			walk_state->method_desc->method.thread_count));
+	}
+
+	if (!walk_state->method_desc->method.thread_count) {
+		/*
+		 * Support to dynamically change a method from not_serialized to
+		 * Serialized if it appears that the method is written foolishly and
+		 * does not support multiple thread execution.  The best example of this
+		 * is if such a method creates namespace objects and blocks.  A second
+		 * thread will fail with an AE_ALREADY_EXISTS exception
+		 *
+		 * This code is here because we must wait until the last thread exits
+		 * before creating the synchronization semaphore.
+		 */
+		if ((walk_state->method_desc->method.concurrency == 1) &&
+			(!walk_state->method_desc->method.semaphore)) {
+			status = acpi_os_create_semaphore (1,
+					 1,
+					 &walk_state->method_desc->method.semaphore);
+		}
+
+		/*
+		 * There are no more threads executing this method.  Perform
+		 * additional cleanup.
+		 *
+		 * The method Node is stored in the walk state
+		 */
+		method_node = walk_state->method_node;
+
+		/*
+		 * Delete any namespace entries created immediately underneath
+		 * the method
+		 */
+		status = acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		if (method_node->child) {
+			acpi_ns_delete_namespace_subtree (method_node);
+		}
+
+		/*
+		 * Delete any namespace entries created anywhere else within
+		 * the namespace
+		 */
+		acpi_ns_delete_namespace_by_owner (walk_state->method_desc->method.owning_id);
+		status = acpi_ut_release_mutex (ACPI_MTX_NAMESPACE);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+	}
+
+	status = acpi_ut_release_mutex (ACPI_MTX_PARSER);
+	return_ACPI_STATUS (status);
+}
+
+