Merge commit 'v2.6.28-rc9' into x86/apic

15 files changed, 235 insertions, 95 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 78fbec8ceda..421b7c71e72 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -153,7 +153,7 @@ config SATA_PROMISE
 	  If unsure, say N.
 
 config SATA_SX4
-	tristate "Promise SATA SX4 support"
+	tristate "Promise SATA SX4 support (Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for Promise Serial ATA SX4.
@@ -219,8 +219,8 @@ config PATA_ACPI
 	  otherwise unsupported hardware.
 
 config PATA_ALI
-	tristate "ALi PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "ALi PATA support"
+	depends on PCI
 	help
 	  This option enables support for the ALi ATA interfaces
 	  found on the many ALi chipsets.
@@ -263,7 +263,7 @@ config PATA_ATIIXP
 	  If unsure, say N.
 
 config PATA_CMD640_PCI
-	tristate "CMD640 PCI PATA support (Very Experimental)"
+	tristate "CMD640 PCI PATA support (Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the CMD640 PCI IDE
@@ -291,8 +291,8 @@ config PATA_CS5520
 	  If unsure, say N.
 
 config PATA_CS5530
-	tristate "CS5530 PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "CS5530 PATA support"
+	depends on PCI
 	help
 	  This option enables support for the Cyrix/NatSemi/AMD CS5530
 	  companion chip used with the MediaGX/Geode processor family.
@@ -309,8 +309,8 @@ config PATA_CS5535
 	  If unsure, say N.
 
 config PATA_CS5536
-	tristate "CS5536 PATA support (Experimental)"
-	depends on PCI && X86 && !X86_64 && EXPERIMENTAL
+	tristate "CS5536 PATA support"
+	depends on PCI && X86 && !X86_64
 	help
 	  This option enables support for the AMD CS5536
 	  companion chip used with the Geode LX processor family.
@@ -363,7 +363,7 @@ config PATA_HPT37X
 	  If unsure, say N.
 
 config PATA_HPT3X2N
-	tristate "HPT 372N/302N PATA support (Very Experimental)"
+	tristate "HPT 372N/302N PATA support (Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the N variant HPT PATA
@@ -389,8 +389,8 @@ config PATA_HPT3X3_DMA
 	  problems with DMA on this chipset.
 
 config PATA_ISAPNP
-	tristate "ISA Plug and Play PATA support (Experimental)"
-	depends on EXPERIMENTAL && ISAPNP
+	tristate "ISA Plug and Play PATA support"
+	depends on ISAPNP
 	help
 	  This option enables support for ISA plug & play ATA
 	  controllers such as those found on old soundcards.
@@ -498,8 +498,8 @@ config PATA_NINJA32
 	  If unsure, say N.
 
 config PATA_NS87410
-	tristate "Nat Semi NS87410 PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "Nat Semi NS87410 PATA support"
+	depends on PCI
 	help
 	  This option enables support for the National Semiconductor
 	  NS87410 PCI-IDE controller.
@@ -507,8 +507,8 @@ config PATA_NS87410
 	  If unsure, say N.
 
 config PATA_NS87415
-	tristate "Nat Semi NS87415 PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "Nat Semi NS87415 PATA support"
+	depends on PCI
 	help
 	  This option enables support for the National Semiconductor
 	  NS87415 PCI-IDE controller.
@@ -544,8 +544,8 @@ config PATA_PCMCIA
 	  If unsure, say N.
 
 config PATA_PDC_OLD
-	tristate "Older Promise PATA controller support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "Older Promise PATA controller support"
+	depends on PCI
 	help
 	  This option enables support for the Promise 20246, 20262, 20263,
 	  20265 and 20267 adapters.
@@ -559,7 +559,7 @@ config PATA_QDI
 	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 
 config PATA_RADISYS
-	tristate "RADISYS 82600 PATA support (Very Experimental)"
+	tristate "RADISYS 82600 PATA support (Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the RADISYS 82600
@@ -586,8 +586,8 @@ config PATA_RZ1000
 	  If unsure, say N.
 
 config PATA_SC1200
-	tristate "SC1200 PATA support (Very Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "SC1200 PATA support"
+	depends on PCI
 	help
 	  This option enables support for the NatSemi/AMD SC1200 SoC
 	  companion chip used with the Geode processor family.
@@ -620,8 +620,8 @@ config PATA_SIL680
 	  If unsure, say N.
 
 config PATA_SIS
-	tristate "SiS PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "SiS PATA support"
+	depends on PCI
 	help
 	  This option enables support for SiS PATA controllers
 
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 8e37be19bbf..c11936e13dd 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1066,6 +1066,28 @@ static int piix_broken_suspend(void)
 		if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL))
 			return 1;
 
+	/* TECRA M4 sometimes forgets its identify and reports bogus
+	 * DMI information.  As the bogus information is a bit
+	 * generic, match as many entries as possible.  This manual
+	 * matching is necessary because dmi_system_id.matches is
+	 * limited to four entries.
+	 */
+	if (dmi_get_system_info(DMI_SYS_VENDOR) &&
+	    dmi_get_system_info(DMI_PRODUCT_NAME) &&
+	    dmi_get_system_info(DMI_PRODUCT_VERSION) &&
+	    dmi_get_system_info(DMI_PRODUCT_SERIAL) &&
+	    dmi_get_system_info(DMI_BOARD_VENDOR) &&
+	    dmi_get_system_info(DMI_BOARD_NAME) &&
+	    dmi_get_system_info(DMI_BOARD_VERSION) &&
+	    !strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") &&
+	    !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") &&
+	    !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") &&
+	    !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") &&
+	    !strcmp(dmi_get_system_info(DMI_BOARD_VENDOR), "TOSHIBA") &&
+	    !strcmp(dmi_get_system_info(DMI_BOARD_NAME), "Portable PC") &&
+	    !strcmp(dmi_get_system_info(DMI_BOARD_VERSION), "Version A0"))
+		return 1;
+
 	return 0;
 }
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 622350d9b2e..bc6695e3c84 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -612,7 +612,7 @@ u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
 		if (tf->flags & ATA_TFLAG_LBA48) {
 			block |= (u64)tf->hob_lbah << 40;
 			block |= (u64)tf->hob_lbam << 32;
-			block |= tf->hob_lbal << 24;
+			block |= (u64)tf->hob_lbal << 24;
 		} else
 			block |= (tf->device & 0xf) << 24;
 
@@ -1712,6 +1712,8 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
 	else
 		tag = 0;
 
+	if (test_and_set_bit(tag, &ap->qc_allocated))
+		BUG();
 	qc = __ata_qc_from_tag(ap, tag);
 
 	qc->tag = tag;
@@ -2490,6 +2492,13 @@ int ata_dev_configure(struct ata_device *dev)
 		}
 	}
 
+	if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) {
+		ata_dev_printk(dev, KERN_WARNING, "WARNING: device requires "
+			       "firmware update to be fully functional.\n");
+		ata_dev_printk(dev, KERN_WARNING, "         contact the vendor "
+			       "or visit http://ata.wiki.kernel.org.\n");
+	}
+
 	return 0;
 
 err_out_nosup:
@@ -4040,6 +4049,73 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "ST380817AS",		"3.42",		ATA_HORKAGE_NONCQ },
 	{ "ST3160023AS",	"3.42",		ATA_HORKAGE_NONCQ },
 
+	/* Seagate NCQ + FLUSH CACHE firmware bug */
+	{ "ST31500341AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31500341AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31500341AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31500341AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31500341AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST31000333AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3640623AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3640323AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3320813AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3320613AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
 	/* Blacklist entries taken from Silicon Image 3124/3132
 	   Windows driver .inf file - also several Linux problem reports */
 	{ "HTS541060G9SA00",    "MB3OC60D",     ATA_HORKAGE_NONCQ, },
@@ -4563,6 +4639,37 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
 }
 
 /**
+ *	ata_qc_new - Request an available ATA command, for queueing
+ *	@ap: Port associated with device @dev
+ *	@dev: Device from whom we request an available command structure
+ *
+ *	LOCKING:
+ *	None.
+ */
+
+static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
+{
+	struct ata_queued_cmd *qc = NULL;
+	unsigned int i;
+
+	/* no command while frozen */
+	if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
+		return NULL;
+
+	/* the last tag is reserved for internal command. */
+	for (i = 0; i < ATA_MAX_QUEUE - 1; i++)
+		if (!test_and_set_bit(i, &ap->qc_allocated)) {
+			qc = __ata_qc_from_tag(ap, i);
+			break;
+		}
+
+	if (qc)
+		qc->tag = i;
+
+	return qc;
+}
+
+/**
  *	ata_qc_new_init - Request an available ATA command, and initialize it
  *	@dev: Device from whom we request an available command structure
  *	@tag: command tag
@@ -4571,20 +4678,16 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
  *	None.
  */
 
-struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag)
+struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev)
 {
 	struct ata_port *ap = dev->link->ap;
 	struct ata_queued_cmd *qc;
 
-	if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
-		return NULL;
-
-	qc = __ata_qc_from_tag(ap, tag);
+	qc = ata_qc_new(ap);
 	if (qc) {
 		qc->scsicmd = NULL;
 		qc->ap = ap;
 		qc->dev = dev;
-		qc->tag = tag;
 
 		ata_qc_reinit(qc);
 	}
@@ -4592,6 +4695,31 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag)
 	return qc;
 }
 
+/**
+ *	ata_qc_free - free unused ata_queued_cmd
+ *	@qc: Command to complete
+ *
+ *	Designed to free unused ata_queued_cmd object
+ *	in case something prevents using it.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_qc_free(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	unsigned int tag;
+
+	WARN_ON(qc == NULL);	/* ata_qc_from_tag _might_ return NULL */
+
+	qc->flags = 0;
+	tag = qc->tag;
+	if (likely(ata_tag_valid(tag))) {
+		qc->tag = ATA_TAG_POISON;
+		clear_bit(tag, &ap->qc_allocated);
+	}
+}
+
 void __ata_qc_complete(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 8077bdf5d30..32da9a93ce4 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -610,9 +610,6 @@ void ata_scsi_error(struct Scsi_Host *host)
 				if (ata_ncq_enabled(dev))
 					ehc->saved_ncq_enabled |= 1 << devno;
 			}
-
-			/* set last reset timestamp to some time in the past */
-			ehc->last_reset = jiffies - 60 * HZ;
 		}
 
 		ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS;
@@ -2281,17 +2278,21 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	if (link->flags & ATA_LFLAG_NO_SRST)
 		softreset = NULL;
 
-	now = jiffies;
-	deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN);
-	if (time_before(now, deadline))
-		schedule_timeout_uninterruptible(deadline - now);
+	/* make sure each reset attemp is at least COOL_DOWN apart */
+	if (ehc->i.flags & ATA_EHI_DID_RESET) {
+		now = jiffies;
+		WARN_ON(time_after(ehc->last_reset, now));
+		deadline = ata_deadline(ehc->last_reset,
+					ATA_EH_RESET_COOL_DOWN);
+		if (time_before(now, deadline))
+			schedule_timeout_uninterruptible(deadline - now);
+	}
 
 	spin_lock_irqsave(ap->lock, flags);
 	ap->pflags |= ATA_PFLAG_RESETTING;
 	spin_unlock_irqrestore(ap->lock, flags);
 
 	ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
-	ehc->last_reset = jiffies;
 
 	ata_link_for_each_dev(dev, link) {
 		/* If we issue an SRST then an ATA drive (not ATAPI)
@@ -2379,7 +2380,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	/*
 	 * Perform reset
 	 */
-	ehc->last_reset = jiffies;
 	if (ata_is_host_link(link))
 		ata_eh_freeze_port(ap);
 
@@ -2391,6 +2391,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 					reset == softreset ? "soft" : "hard");
 
 		/* mark that this EH session started with reset */
+		ehc->last_reset = jiffies;
 		if (reset == hardreset)
 			ehc->i.flags |= ATA_EHI_DID_HARDRESET;
 		else
@@ -2535,7 +2536,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	ata_eh_done(link, NULL, ATA_EH_RESET);
 	if (slave)
 		ata_eh_done(slave, NULL, ATA_EH_RESET);
-	ehc->last_reset = jiffies;
+	ehc->last_reset = jiffies;	/* update to completion time */
 	ehc->i.action |= ATA_EH_REVALIDATE;
 
 	rc = 0;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 3fa75eac135..47c7afcb36f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -709,11 +709,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
 {
 	struct ata_queued_cmd *qc;
 
-	if (cmd->request->tag != -1)
-		qc = ata_qc_new_init(dev, cmd->request->tag);
-	else
-		qc = ata_qc_new_init(dev, 0);
-
+	qc = ata_qc_new_init(dev);
 	if (qc) {
 		qc->scsicmd = cmd;
 		qc->scsidone = done;
@@ -1108,17 +1104,7 @@ static int ata_scsi_dev_config(struct scsi_device *sdev,
 
 		depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id));
 		depth = min(ATA_MAX_QUEUE - 1, depth);
-
-		/*
-		 * If this device is behind a port multiplier, we have
-		 * to share the tag map between all devices on that PMP.
-		 * Set up the shared tag map here and we get automatic.
-		 */
-		if (dev->link->ap->pmp_link)
-			scsi_init_shared_tag_map(sdev->host, ATA_MAX_QUEUE - 1);
-
-		scsi_set_tag_type(sdev, MSG_SIMPLE_TAG);
-		scsi_activate_tcq(sdev, depth);
+		scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth);
 	}
 
 	return 0;
@@ -1958,11 +1944,6 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
 		hdr[1] |= (1 << 7);
 
 	memcpy(rbuf, hdr, sizeof(hdr));
-
-	/* if ncq, set tags supported */
-	if (ata_id_has_ncq(args->id))
-		rbuf[7] |= (1 << 1);
-
 	memcpy(&rbuf[8], "ATA     ", 8);
 	ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16);
 	ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 4b473948632..9033d164c4e 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1227,10 +1227,19 @@ fsm_start:
 			/* ATA PIO protocol */
 			if (unlikely((status & ATA_DRQ) == 0)) {
 				/* handle BSY=0, DRQ=0 as error */
-				if (likely(status & (ATA_ERR | ATA_DF)))
+				if (likely(status & (ATA_ERR | ATA_DF))) {
 					/* device stops HSM for abort/error */
 					qc->err_mask |= AC_ERR_DEV;
-				else {
+
+					/* If diagnostic failed and this is
+					 * IDENTIFY, it's likely a phantom
+					 * device.  Mark hint.
+					 */
+					if (qc->dev->horkage &
+					    ATA_HORKAGE_DIAGNOSTIC)
+						qc->err_mask |=
+							AC_ERR_NODEV_HINT;
+				} else {
 					/* HSM violation. Let EH handle this.
 					 * Phantom devices also trigger this
 					 * condition.  Mark hint.
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index d3831d39bda..fe2839e5877 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -74,7 +74,7 @@ extern struct ata_link *ata_dev_phys_link(struct ata_device *dev);
 extern void ata_force_cbl(struct ata_port *ap);
 extern u64 ata_tf_to_lba(const struct ata_taskfile *tf);
 extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf);
-extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag);
+extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
 extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
 			   u64 block, u32 n_block, unsigned int tf_flags,
 			   unsigned int tag);
@@ -103,6 +103,7 @@ extern int ata_dev_configure(struct ata_device *dev);
 extern int sata_down_spd_limit(struct ata_link *link);
 extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
 extern void ata_sg_clean(struct ata_queued_cmd *qc);
+extern void ata_qc_free(struct ata_queued_cmd *qc);
 extern void ata_qc_issue(struct ata_queued_cmd *qc);
 extern void __ata_qc_complete(struct ata_queued_cmd *qc);
 extern int atapi_check_dma(struct ata_queued_cmd *qc);
@@ -118,22 +119,6 @@ extern struct ata_port *ata_port_alloc(struct ata_host *host);
 extern void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy);
 extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm);
 
-/**
- *	ata_qc_free - free unused ata_queued_cmd
- *	@qc: Command to complete
- *
- *	Designed to free unused ata_queued_cmd object
- *	in case something prevents using it.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-static inline void ata_qc_free(struct ata_queued_cmd *qc)
-{
-	qc->flags = 0;
-	qc->tag = ATA_TAG_POISON;
-}
-
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
 extern void ata_acpi_associate_sata_port(struct ata_port *ap);
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 1b2d4a0f5f7..8b236af84c2 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -72,7 +72,6 @@
 /**
  *	cs5535_cable_detect	-	detect cable type
  *	@ap: Port to detect on
- *	@deadline: deadline jiffies for the operation
  *
  *	Perform cable detection for ATA66 capable cable. Return a libata
  *	cable type.
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 73f8332cb67..afed9297619 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -110,7 +110,6 @@ static inline int cs5536_write(struct pci_dev *pdev, int reg, int val)
 /**
  *	cs5536_cable_detect	-	detect cable type
  *	@ap: Port to detect on
- *	@deadline: deadline jiffies for the operation
  *
  *	Perform cable detection for ATA66 capable cable. Return a libata
  *	cable type.
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index f2b83eabc7c..e0c4f05d7d5 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -183,7 +183,9 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask)
 			mask &= ~(0xF8 << ATA_SHIFT_UDMA);
 		if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
 			mask &= ~(0xF0 << ATA_SHIFT_UDMA);
-	}
+	} else if (adev->class == ATA_DEV_ATAPI)
+		mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+
 	return ata_bmdma_mode_filter(adev, mask);
 }
 
@@ -211,11 +213,15 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
 
 static int hpt36x_cable_detect(struct ata_port *ap)
 {
-	u8 ata66;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 ata66;
 
+	/*
+	 * Each channel of pata_hpt366 occupies separate PCI function
+	 * as the primary channel and bit1 indicates the cable type.
+	 */
 	pci_read_config_byte(pdev, 0x5A, &ata66);
-	if (ata66 & (1 << ap->port_no))
+	if (ata66 & 2)
 		return ATA_CBL_PATA40;
 	return ATA_CBL_PATA80;
 }
@@ -382,10 +388,10 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* PCI clocking determines the ATA timing values to use */
 	/* info_hpt366 is safe against re-entry so we can scribble on it */
 	switch((reg1 & 0x700) >> 8) {
-		case 5:
+		case 9:
 			hpriv = &hpt366_40;
 			break;
-		case 9:
+		case 5:
 			hpriv = &hpt366_25;
 			break;
 		default:
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 4e466eae8b4..4dd9a3b031e 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -44,7 +44,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_ninja32"
-#define DRV_VERSION "0.1.1"
+#define DRV_VERSION "0.1.3"
 
 
 /**
@@ -130,7 +130,8 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		return rc;
 	pci_set_master(dev);
 
-	/* Set up the register mappings */
+	/* Set up the register mappings. We use the I/O mapping as only the
+	   older chips also have MMIO on BAR 1 */
 	base = host->iomap[0];
 	if (!base)
 		return -ENOMEM;
@@ -167,8 +168,12 @@ static int ninja32_reinit_one(struct pci_dev *pdev)
 #endif
 
 static const struct pci_device_id ninja32[] = {
+	{ 0x10FC, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0x1145, 0x8008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0x1145, 0xf008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0x1145, 0xf02C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ },
 };
 
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 271cb64d429..64b2e2281ee 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -416,6 +416,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
 	PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
 	PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
+	PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506),
 	PCMCIA_DEVICE_NULL,
 };
 
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index f8b3ffc8ae9..c2e6fb9f2ef 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -39,9 +39,11 @@
 #define RB500_CF_MAXPORTS	1
 #define RB500_CF_IO_DELAY	400
 
-#define RB500_CF_REG_CMD	0x0800
+#define RB500_CF_REG_BASE	0x0800
+#define RB500_CF_REG_ERR	0x080D
 #define RB500_CF_REG_CTRL	0x080E
-#define RB500_CF_REG_DATA	0x0C00
+/* 32bit buffered data register offset */
+#define RB500_CF_REG_DBUF32	0x0C00
 
 struct rb532_cf_info {
 	void __iomem	*iobase;
@@ -72,11 +74,12 @@ static void rb532_pata_exec_command(struct ata_port *ap,
 	rb532_pata_finish_io(ap);
 }
 
-static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
+static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
 				unsigned int buflen, int write_data)
 {
 	struct ata_port *ap = adev->link->ap;
 	void __iomem *ioaddr = ap->ioaddr.data_addr;
+	int retlen = buflen;
 
 	if (write_data) {
 		for (; buflen > 0; buflen--, buf++)
@@ -87,6 +90,7 @@ static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
 	}
 
 	rb532_pata_finish_io(adev->link->ap);
+	return retlen;
 }
 
 static void rb532_pata_freeze(struct ata_port *ap)
@@ -146,13 +150,14 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
 	ap->pio_mask	= 0x1f; /* PIO4 */
 	ap->flags	= ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
 
-	ap->ioaddr.cmd_addr	= info->iobase + RB500_CF_REG_CMD;
+	ap->ioaddr.cmd_addr	= info->iobase + RB500_CF_REG_BASE;
 	ap->ioaddr.ctl_addr	= info->iobase + RB500_CF_REG_CTRL;
 	ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
 
 	ata_sff_std_ports(&ap->ioaddr);
 
-	ap->ioaddr.data_addr	= info->iobase + RB500_CF_REG_DATA;
+	ap->ioaddr.data_addr	= info->iobase + RB500_CF_REG_DBUF32;
+	ap->ioaddr.error_addr	= info->iobase + RB500_CF_REG_ERR;
 }
 
 static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c
index c8cc027789f..6aeeeeb3412 100644
--- a/drivers/ata/pata_sch.c
+++ b/drivers/ata/pata_sch.c
@@ -83,7 +83,7 @@ static struct ata_port_operations sch_pata_ops = {
 };
 
 static struct ata_port_info sch_port_info = {
-	.flags		= 0,
+	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= ATA_PIO4,   /* pio0-4 */
 	.mwdma_mask	= ATA_MWDMA2, /* mwdma0-2 */
 	.udma_mask	= ATA_UDMA5,  /* udma0-5 */
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index d3423661175..e4be55e047f 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -56,7 +56,6 @@ static const struct sis_laptop sis_laptop[] = {
 	{ 0x5513, 0x1043, 0x1107 },	/* ASUS A6K */
 	{ 0x5513, 0x1734, 0x105F },	/* FSC Amilo A1630 */
 	{ 0x5513, 0x1071, 0x8640 },     /* EasyNote K5305 */
-	{ 0x5513, 0x1039, 0x5513 },	/* Targa Visionary 1000 */
 	/* end marker */
 	{ 0, }
 };