Remove legacy CDROM drivers

They are all broken beyond repair. Given that nobody has complained
about them (most haven't worked in 2.6 AT ALL), remove them from the
tree.

A new mitsumi driver that actually works is in progress, it'll get
added when completed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

1 files changed, 0 insertions, 181 deletions

diff --git a/drivers/cdrom/sjcd.h b/drivers/cdrom/sjcd.h
deleted file mode 100644
index 0aa5e714659..00000000000
--- a/drivers/cdrom/sjcd.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Definitions for a Sanyo CD-ROM interface.
- *
- *   Copyright (C) 1995  Vadim V. Model
- *                                       model@cecmow.enet.dec.com
- *                                       vadim@rbrf.msk.su
- *                                       vadim@ipsun.ras.ru
- *                       Eric van der Maarel
- *                                       H.T.M.v.d.Maarel@marin.nl
- *
- *  This information is based on mcd.c from M. Harriss and sjcd102.lst from
- *  E. Moenkeberg.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __SJCD_H__
-#define __SJCD_H__
-
-/*
- * Change this to set the I/O port address as default. More flexibility
- * come with setup implementation.
- */
-#define SJCD_BASE_ADDR      0x340
-
-/*
- * Change this to set the irq as default. Really SANYO do not use interrupts
- * at all.
- */
-#define SJCD_INTR_NR        0
-
-/*
- * Change this to set the dma as default value. really SANYO does not use
- * direct memory access at all.
- */
-#define SJCD_DMA_NR         0
-
-/*
- * Macros which allow us to find out the status of the drive.
- */
-#define SJCD_STATUS_AVAILABLE( x ) (((x)&0x02)==0)
-#define SJCD_DATA_AVAILABLE( x )   (((x)&0x01)==0)
-
-/*
- * Port access macro. Three ports are available: S-data port (command port),
- * status port (read only) and D-data port (read only).
- */
-#define SJCDPORT( x )       ( sjcd_base + ( x ) )
-#define SJCD_STATUS_PORT    SJCDPORT( 1 )
-#define SJCD_S_DATA_PORT    SJCDPORT( 0 )
-#define SJCD_COMMAND_PORT   SJCDPORT( 0 )
-#define SJCD_D_DATA_PORT    SJCDPORT( 2 )
-
-/*
- * Drive info bits. Drive info available as first (mandatory) byte of
- * command completion status.
- */
-#define SST_NOT_READY       0x10        /* no disk in the drive (???) */
-#define SST_MEDIA_CHANGED   0x20        /* disk is changed */
-#define SST_DOOR_OPENED     0x40        /* door is open */
-
-/* commands */
-
-#define SCMD_EJECT_TRAY     0xD0        /* eject tray if not locked */
-#define SCMD_LOCK_TRAY      0xD2        /* lock tray when in */
-#define SCMD_UNLOCK_TRAY    0xD4        /* unlock tray when in */
-#define SCMD_CLOSE_TRAY     0xD6        /* load tray in */
-
-#define SCMD_RESET          0xFA        /* soft reset */
-#define SCMD_GET_STATUS     0x80
-#define SCMD_GET_VERSION    0xCC
-
-#define SCMD_DATA_READ      0xA0        /* are the same, depend on mode&args */
-#define SCMD_SEEK           0xA0
-#define SCMD_PLAY           0xA0
-
-#define SCMD_GET_QINFO      0xA8
-
-#define SCMD_SET_MODE       0xC4
-#define SCMD_MODE_PLAY      0xE0
-#define SCMD_MODE_COOKED    (0xF8 & ~0x20)
-#define SCMD_MODE_RAW       0xF9
-#define SCMD_MODE_x20_BIT   0x20        /* What is it for ? */
-
-#define SCMD_SET_VOLUME     0xAE
-#define SCMD_PAUSE          0xE0
-#define SCMD_STOP           0xE0
-
-#define SCMD_GET_DISK_INFO  0xAA
-
-/*
- * Some standard arguments for SCMD_GET_DISK_INFO.
- */
-#define SCMD_GET_1_TRACK    0xA0    /* get the first track information */
-#define SCMD_GET_L_TRACK    0xA1    /* get the last track information */
-#define SCMD_GET_D_SIZE     0xA2    /* get the whole disk information */
-
-/*
- * Borrowed from hd.c. Allows to optimize multiple port read commands.
- */
-#define S_READ_DATA( port, buf, nr )      insb( port, buf, nr )
-
-/*
- * We assume that there are no audio disks with TOC length more than this
- * number (I personally have never seen disks with more than 20 fragments).
- */
-#define SJCD_MAX_TRACKS		100
-
-struct msf {
-  unsigned char   min;
-  unsigned char   sec;
-  unsigned char   frame;
-};
-
-struct sjcd_hw_disk_info {
-  unsigned char track_control;
-  unsigned char track_no;
-  unsigned char x, y, z;
-  union {
-    unsigned char track_no;
-    struct msf track_msf;
-  } un;
-};
-
-struct sjcd_hw_qinfo {
-  unsigned char track_control;
-  unsigned char track_no;
-  unsigned char x;
-  struct msf rel;
-  struct msf abs;
-};
-
-struct sjcd_play_msf {
-  struct msf  start;
-  struct msf  end;
-};
-
-struct sjcd_disk_info {
-  unsigned char   first;
-  unsigned char   last;
-  struct msf      disk_length;
-  struct msf      first_track;
-};
-
-struct sjcd_toc {
-  unsigned char   ctrl_addr;
-  unsigned char   track;
-  unsigned char   point_index;
-  struct msf      track_time;
-  struct msf      disk_time;
-};
-
-#if defined( SJCD_GATHER_STAT )
-
-struct sjcd_stat {
-  int ticks;
-  int tticks[ 8 ];
-  int idle_ticks;
-  int start_ticks;
-  int mode_ticks;
-  int read_ticks;
-  int data_ticks;
-  int stop_ticks;
-  int stopping_ticks;
-};
-
-#endif
-
-#endif