Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (59 commits)
  ide-floppy: do not complete rq's prematurely
  ide: be able to build pmac driver without IDE built-in
  ide-pmac: IDE cable detection on Apple PowerBook
  ide: inline SELECT_DRIVE()
  ide: turn selectproc() method into dev_select() method (take 5)
  MAINTAINERS: move old ide-{floppy,tape} entries to CREDITS (take 2)
  ide: move data register access out of tf_{read|load}() methods (take 2)
  ide: call {in|out}put_data() methods from tf_{read|load}() methods (take 2)
  ide-io-std: shorten ide_{in|out}put_data()
  ide: rename IDE_TFLAG_IN_[HOB_]FEATURE
  ide: turn set_irq() method into write_devctl() method
  ide: use ATA_HOB
  ide-disk: use ATA_ERR
  ide: add support for CFA specified transfer modes (take 3)
  ide-iops: only clear DMA words on setting DMA mode
  ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3)
  au1xxx-ide: auide_{in|out}sw() should be static
  ide-floppy: use ide_pio_bytes()
  ide-{floppy,tape}: fix padding for PIO transfers
  ide: remove CONFIG_BLK_DEV_IDEDOUBLER config option
  ...

1 files changed, 11 insertions, 22 deletions

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 640c9920724..cf06494bb74 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -222,7 +222,8 @@ comment "IDE chipset support/bugfixes"
 
 config IDE_GENERIC
 	tristate "generic/default IDE chipset support"
-	depends on ALPHA || X86 || IA64 || M32R || MIPS
+	depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC || ARCH_SHARK
+	default ARM && (ARCH_RPC || ARCH_SHARK)
 	help
 	  This is the generic IDE driver.  This driver attaches to the
 	  fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and
@@ -680,7 +681,7 @@ endif
 # TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
 config BLK_DEV_IDE_PMAC
 	tristate "PowerMac on-board IDE support"
-	depends on PPC_PMAC && IDE=y
+	depends on PPC_PMAC
 	select IDE_TIMINGS
 	select BLK_DEV_IDEDMA_PCI
 	help
@@ -731,11 +732,6 @@ config BLK_DEV_IDE_AT91
 	depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40
 	select IDE_TIMINGS
 
-config IDE_ARM
-	tristate "ARM IDE support"
-	depends on ARM && (ARCH_RPC || ARCH_SHARK)
-	default y
-
 config BLK_DEV_IDE_ICSIDE
 	tristate "ICS IDE interface support"
 	depends on ARM && ARCH_ACORN
@@ -774,27 +770,20 @@ config BLK_DEV_GAYLE
 	  This includes on-board IDE interfaces on some Amiga models (A600,
 	  A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion
 	  bus (M-Tech E-Matrix 530 expansion card).
-	  Say Y if you have an Amiga with a Gayle IDE interface and want to use
-	  IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
-	  it.
-	  Note that you also have to enable Zorro bus support if you want to
-	  use Gayle IDE interfaces on the Zorro expansion bus.
 
-config BLK_DEV_IDEDOUBLER
-	bool "Amiga IDE Doubler support (EXPERIMENTAL)"
-	depends on BLK_DEV_GAYLE && EXPERIMENTAL
-	---help---
-	  This feature provides support for the so-called `IDE doublers' (made
+	  It also provides support for the so-called `IDE doublers' (made
 	  by various manufacturers, e.g. Eyetech) that can be connected to
 	  the on-board IDE interface of some Amiga models. Using such an IDE
 	  doubler, you can connect up to four instead of two IDE devices to
-	  the Amiga's on-board IDE interface.
+	  the Amiga's on-board IDE interface. The feature is enabled at kernel
+	  runtime using the "gayle.doubler" kernel boot parameter.
 
-	  Note that the normal Amiga Gayle IDE driver may not work correctly
-	  if you have an IDE doubler and don't enable this feature!
+	  Say Y if you have an Amiga with a Gayle IDE interface and want to use
+	  IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
+	  it.
 
-	  Say Y if you have an IDE doubler.  The feature is enabled at kernel
-	  runtime using the "gayle.doubler" kernel boot parameter.
+	  Note that you also have to enable Zorro bus support if you want to
+	  use Gayle IDE interfaces on the Zorro expansion bus.
 
 config BLK_DEV_BUDDHA
 	tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"