aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/cris
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/ide/cris
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/ide/cris')
-rw-r--r--drivers/ide/cris/Makefile3
-rw-r--r--drivers/ide/cris/ide-v10.c842
2 files changed, 845 insertions, 0 deletions
diff --git a/drivers/ide/cris/Makefile b/drivers/ide/cris/Makefile
new file mode 100644
index 00000000000..fdc294325d0
--- /dev/null
+++ b/drivers/ide/cris/Makefile
@@ -0,0 +1,3 @@
+EXTRA_CFLAGS += -Idrivers/ide
+
+obj-$(CONFIG_ETRAX_ARCH_V10) += ide-v10.o
diff --git a/drivers/ide/cris/ide-v10.c b/drivers/ide/cris/ide-v10.c
new file mode 100644
index 00000000000..5b40220d3dd
--- /dev/null
+++ b/drivers/ide/cris/ide-v10.c
@@ -0,0 +1,842 @@
+/* $Id: ide.c,v 1.4 2004/10/12 07:55:48 starvik Exp $
+ *
+ * Etrax specific IDE functions, like init and PIO-mode setting etc.
+ * Almost the entire ide.c is used for the rest of the Etrax ATA driver.
+ * Copyright (c) 2000-2004 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (initial version)
+ * Mikael Starvik (pio setup stuff, Linux 2.6 port)
+ */
+
+/* Regarding DMA:
+ *
+ * There are two forms of DMA - "DMA handshaking" between the interface and the drive,
+ * and DMA between the memory and the interface. We can ALWAYS use the latter, since it's
+ * something built-in in the Etrax. However only some drives support the DMA-mode handshaking
+ * on the ATA-bus. The normal PC driver and Triton interface disables memory-if DMA when the
+ * device can't do DMA handshaking for some stupid reason. We don't need to do that.
+ */
+
+#undef REALLY_SLOW_IO /* most systems can safely undef this */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+#include <linux/scatterlist.h>
+
+#include <asm/io.h>
+#include <asm/arch/svinto.h>
+#include <asm/dma.h>
+
+/* number of Etrax DMA descriptors */
+#define MAX_DMA_DESCRS 64
+
+/* number of times to retry busy-flags when reading/writing IDE-registers
+ * this can't be too high because a hung harddisk might cause the watchdog
+ * to trigger (sometimes INB and OUTB are called with irq's disabled)
+ */
+
+#define IDE_REGISTER_TIMEOUT 300
+
+static int e100_read_command = 0;
+
+#define LOWDB(x)
+#define D(x)
+
+static int e100_ide_build_dmatable (ide_drive_t *drive);
+static ide_startstop_t etrax_dma_intr (ide_drive_t *drive);
+
+void
+etrax100_ide_outw(unsigned short data, unsigned long reg) {
+ int timeleft;
+ LOWDB(printk("ow: data 0x%x, reg 0x%x\n", data, reg));
+
+ /* note the lack of handling any timeouts. we stop waiting, but we don't
+ * really notify anybody.
+ */
+
+ timeleft = IDE_REGISTER_TIMEOUT;
+ /* wait for busy flag */
+ while(timeleft && (*R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy)))
+ timeleft--;
+
+ /*
+ * Fall through at a timeout, so the ongoing command will be
+ * aborted by the write below, which is expected to be a dummy
+ * command to the command register. This happens when a faulty
+ * drive times out on a command. See comment on timeout in
+ * INB.
+ */
+ if(!timeleft)
+ printk("ATA timeout reg 0x%lx := 0x%x\n", reg, data);
+
+ *R_ATA_CTRL_DATA = reg | data; /* write data to the drive's register */
+
+ timeleft = IDE_REGISTER_TIMEOUT;
+ /* wait for transmitter ready */
+ while(timeleft && !(*R_ATA_STATUS_DATA &
+ IO_MASK(R_ATA_STATUS_DATA, tr_rdy)))
+ timeleft--;
+}
+
+void
+etrax100_ide_outb(unsigned char data, unsigned long reg)
+{
+ etrax100_ide_outw(data, reg);
+}
+
+void
+etrax100_ide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port)
+{
+ etrax100_ide_outw(addr, port);
+}
+
+unsigned short
+etrax100_ide_inw(unsigned long reg) {
+ int status;
+ int timeleft;
+
+ timeleft = IDE_REGISTER_TIMEOUT;
+ /* wait for busy flag */
+ while(timeleft && (*R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy)))
+ timeleft--;
+
+ if(!timeleft) {
+ /*
+ * If we're asked to read the status register, like for
+ * example when a command does not complete for an
+ * extended time, but the ATA interface is stuck in a
+ * busy state at the *ETRAX* ATA interface level (as has
+ * happened repeatedly with at least one bad disk), then
+ * the best thing to do is to pretend that we read
+ * "busy" in the status register, so the IDE driver will
+ * time-out, abort the ongoing command and perform a
+ * reset sequence. Note that the subsequent OUT_BYTE
+ * call will also timeout on busy, but as long as the
+ * write is still performed, everything will be fine.
+ */
+ if ((reg & IO_MASK (R_ATA_CTRL_DATA, addr))
+ == IO_FIELD (R_ATA_CTRL_DATA, addr, IDE_STATUS_OFFSET))
+ return BUSY_STAT;
+ else
+ /* For other rare cases we assume 0 is good enough. */
+ return 0;
+ }
+
+ *R_ATA_CTRL_DATA = reg | IO_STATE(R_ATA_CTRL_DATA, rw, read); /* read data */
+
+ timeleft = IDE_REGISTER_TIMEOUT;
+ /* wait for available */
+ while(timeleft && !((status = *R_ATA_STATUS_DATA) &
+ IO_MASK(R_ATA_STATUS_DATA, dav)))
+ timeleft--;
+
+ if(!timeleft)
+ return 0;
+
+ LOWDB(printk("inb: 0x%x from reg 0x%x\n", status & 0xff, reg));
+
+ return (unsigned short)status;
+}
+
+unsigned char
+etrax100_ide_inb(unsigned long reg)
+{
+ return (unsigned char)etrax100_ide_inw(reg);
+}
+
+/* PIO timing (in R_ATA_CONFIG)
+ *
+ * _____________________________
+ * ADDRESS : ________/
+ *
+ * _______________
+ * DIOR : ____________/ \__________
+ *
+ * _______________
+ * DATA : XXXXXXXXXXXXXXXX_______________XXXXXXXX
+ *
+ *
+ * DIOR is unbuffered while address and data is buffered.
+ * This creates two problems:
+ * 1. The DIOR pulse is to early (because it is unbuffered)
+ * 2. The rise time of DIOR is long
+ *
+ * There are at least three different plausible solutions
+ * 1. Use a pad capable of larger currents in Etrax
+ * 2. Use an external buffer
+ * 3. Make the strobe pulse longer
+ *
+ * Some of the strobe timings below are modified to compensate
+ * for this. This implies a slight performance decrease.
+ *
+ * THIS SHOULD NEVER BE CHANGED!
+ *
+ * TODO: Is this true for the latest LX boards still ?
+ */
+
+#define ATA_DMA2_STROBE 4
+#define ATA_DMA2_HOLD 0
+#define ATA_DMA1_STROBE 4
+#define ATA_DMA1_HOLD 1
+#define ATA_DMA0_STROBE 12
+#define ATA_DMA0_HOLD 9
+#define ATA_PIO4_SETUP 1
+#define ATA_PIO4_STROBE 5
+#define ATA_PIO4_HOLD 0
+#define ATA_PIO3_SETUP 1
+#define ATA_PIO3_STROBE 5
+#define ATA_PIO3_HOLD 1
+#define ATA_PIO2_SETUP 1
+#define ATA_PIO2_STROBE 6
+#define ATA_PIO2_HOLD 2
+#define ATA_PIO1_SETUP 2
+#define ATA_PIO1_STROBE 11
+#define ATA_PIO1_HOLD 4
+#define ATA_PIO0_SETUP 4
+#define ATA_PIO0_STROBE 19
+#define ATA_PIO0_HOLD 4
+
+static int e100_dma_check (ide_drive_t *drive);
+static void e100_dma_start(ide_drive_t *drive);
+static int e100_dma_end (ide_drive_t *drive);
+static void e100_ide_input_data (ide_drive_t *drive, void *, unsigned int);
+static void e100_ide_output_data (ide_drive_t *drive, void *, unsigned int);
+static void e100_atapi_input_bytes(ide_drive_t *drive, void *, unsigned int);
+static void e100_atapi_output_bytes(ide_drive_t *drive, void *, unsigned int);
+static int e100_dma_off (ide_drive_t *drive);
+
+
+/*
+ * good_dma_drives() lists the model names (from "hdparm -i")
+ * of drives which do not support mword2 DMA but which are
+ * known to work fine with this interface under Linux.
+ */
+
+const char *good_dma_drives[] = {"Micropolis 2112A",
+ "CONNER CTMA 4000",
+ "CONNER CTT8000-A",
+ NULL};
+
+static void tune_e100_ide(ide_drive_t *drive, byte pio)
+{
+ pio = 4;
+ /* pio = ide_get_best_pio_mode(drive, pio, 4, NULL); */
+
+ /* set pio mode! */
+
+ switch(pio) {
+ case 0:
+ *R_ATA_CONFIG = ( IO_FIELD( R_ATA_CONFIG, enable, 1 ) |
+ IO_FIELD( R_ATA_CONFIG, dma_strobe, ATA_DMA2_STROBE ) |
+ IO_FIELD( R_ATA_CONFIG, dma_hold, ATA_DMA2_HOLD ) |
+ IO_FIELD( R_ATA_CONFIG, pio_setup, ATA_PIO0_SETUP ) |
+ IO_FIELD( R_ATA_CONFIG, pio_strobe, ATA_PIO0_STROBE ) |
+ IO_FIELD( R_ATA_CONFIG, pio_hold, ATA_PIO0_HOLD ) );
+ break;
+ case 1:
+ *R_ATA_CONFIG = ( IO_FIELD( R_ATA_CONFIG, enable, 1 ) |
+ IO_FIELD( R_ATA_CONFIG, dma_strobe, ATA_DMA2_STROBE ) |
+ IO_FIELD( R_ATA_CONFIG, dma_hold, ATA_DMA2_HOLD ) |
+ IO_FIELD( R_ATA_CONFIG, pio_setup, ATA_PIO1_SETUP ) |
+ IO_FIELD( R_ATA_CONFIG, pio_strobe, ATA_PIO1_STROBE ) |
+ IO_FIELD( R_ATA_CONFIG, pio_hold, ATA_PIO1_HOLD ) );
+ break;
+ case 2:
+ *R_ATA_CONFIG = ( IO_FIELD( R_ATA_CONFIG, enable, 1 ) |
+ IO_FIELD( R_ATA_CONFIG, dma_strobe, ATA_DMA2_STROBE ) |
+ IO_FIELD( R_ATA_CONFIG, dma_hold, ATA_DMA2_HOLD ) |
+ IO_FIELD( R_ATA_CONFIG, pio_setup, ATA_PIO2_SETUP ) |
+ IO_FIELD( R_ATA_CONFIG, pio_strobe, ATA_PIO2_STROBE ) |
+ IO_FIELD( R_ATA_CONFIG, pio_hold, ATA_PIO2_HOLD ) );
+ break;
+ case 3:
+ *R_ATA_CONFIG = ( IO_FIELD( R_ATA_CONFIG, enable, 1 ) |
+ IO_FIELD( R_ATA_CONFIG, dma_strobe, ATA_DMA2_STROBE ) |
+ IO_FIELD( R_ATA_CONFIG, dma_hold, ATA_DMA2_HOLD ) |
+ IO_FIELD( R_ATA_CONFIG, pio_setup, ATA_PIO3_SETUP ) |
+ IO_FIELD( R_ATA_CONFIG, pio_strobe, ATA_PIO3_STROBE ) |
+ IO_FIELD( R_ATA_CONFIG, pio_hold, ATA_PIO3_HOLD ) );
+ break;
+ case 4:
+ *R_ATA_CONFIG = ( IO_FIELD( R_ATA_CONFIG, enable, 1 ) |
+ IO_FIELD( R_ATA_CONFIG, dma_strobe, ATA_DMA2_STROBE ) |
+ IO_FIELD( R_ATA_CONFIG, dma_hold, ATA_DMA2_HOLD ) |
+ IO_FIELD( R_ATA_CONFIG, pio_setup, ATA_PIO4_SETUP ) |
+ IO_FIELD( R_ATA_CONFIG, pio_strobe, ATA_PIO4_STROBE ) |
+ IO_FIELD( R_ATA_CONFIG, pio_hold, ATA_PIO4_HOLD ) );
+ break;
+ }
+}
+
+static int e100_dma_setup(ide_drive_t *drive)
+{
+ struct request *rq = drive->hwif->hwgroup->rq;
+
+ if (rq_data_dir(rq)) {
+ e100_read_command = 0;
+
+ RESET_DMA(ATA_TX_DMA_NBR); /* sometimes the DMA channel get stuck so we need to do this */
+ WAIT_DMA(ATA_TX_DMA_NBR);
+ } else {
+ e100_read_command = 1;
+
+ RESET_DMA(ATA_RX_DMA_NBR); /* sometimes the DMA channel get stuck so we need to do this */
+ WAIT_DMA(ATA_RX_DMA_NBR);
+ }
+
+ /* set up the Etrax DMA descriptors */
+ if (e100_ide_build_dmatable(drive)) {
+ ide_map_sg(drive, rq);
+ return 1;
+ }
+
+ return 0;
+}
+
+static void e100_dma_exec_cmd(ide_drive_t *drive, u8 command)
+{
+ /* set the irq handler which will finish the request when DMA is done */
+ ide_set_handler(drive, &etrax_dma_intr, WAIT_CMD, NULL);
+
+ /* issue cmd to drive */
+ etrax100_ide_outb(command, IDE_COMMAND_REG);
+}
+
+void __init
+init_e100_ide (void)
+{
+ volatile unsigned int dummy;
+ int h;
+
+ printk("ide: ETRAX 100LX built-in ATA DMA controller\n");
+
+ /* first fill in some stuff in the ide_hwifs fields */
+
+ for(h = 0; h < MAX_HWIFS; h++) {
+ ide_hwif_t *hwif = &ide_hwifs[h];
+ hwif->mmio = 2;
+ hwif->chipset = ide_etrax100;
+ hwif->tuneproc = &tune_e100_ide;
+ hwif->ata_input_data = &e100_ide_input_data;
+ hwif->ata_output_data = &e100_ide_output_data;
+ hwif->atapi_input_bytes = &e100_atapi_input_bytes;
+ hwif->atapi_output_bytes = &e100_atapi_output_bytes;
+ hwif->ide_dma_check = &e100_dma_check;
+ hwif->ide_dma_end = &e100_dma_end;
+ hwif->dma_setup = &e100_dma_setup;
+ hwif->dma_exec_cmd = &e100_dma_exec_cmd;
+ hwif->dma_start = &e100_dma_start;
+ hwif->OUTB = &etrax100_ide_outb;
+ hwif->OUTW = &etrax100_ide_outw;
+ hwif->OUTBSYNC = &etrax100_ide_outbsync;
+ hwif->INB = &etrax100_ide_inb;
+ hwif->INW = &etrax100_ide_inw;
+ hwif->ide_dma_off_quietly = &e100_dma_off;
+ }
+
+ /* actually reset and configure the etrax100 ide/ata interface */
+
+ *R_ATA_CTRL_DATA = 0;
+ *R_ATA_TRANSFER_CNT = 0;
+ *R_ATA_CONFIG = 0;
+
+ genconfig_shadow = (genconfig_shadow &
+ ~IO_MASK(R_GEN_CONFIG, dma2) &
+ ~IO_MASK(R_GEN_CONFIG, dma3) &
+ ~IO_MASK(R_GEN_CONFIG, ata)) |
+ ( IO_STATE( R_GEN_CONFIG, dma3, ata ) |
+ IO_STATE( R_GEN_CONFIG, dma2, ata ) |
+ IO_STATE( R_GEN_CONFIG, ata, select ) );
+
+ *R_GEN_CONFIG = genconfig_shadow;
+
+ /* pull the chosen /reset-line low */
+
+#ifdef CONFIG_ETRAX_IDE_G27_RESET
+ REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, 27, 0);
+#endif
+#ifdef CONFIG_ETRAX_IDE_CSE1_16_RESET
+ REG_SHADOW_SET(port_cse1_addr, port_cse1_shadow, 16, 0);
+#endif
+#ifdef CONFIG_ETRAX_IDE_CSP0_8_RESET
+ REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, 8, 0);
+#endif
+#ifdef CONFIG_ETRAX_IDE_PB7_RESET
+ port_pb_dir_shadow = port_pb_dir_shadow |
+ IO_STATE(R_PORT_PB_DIR, dir7, output);
+ *R_PORT_PB_DIR = port_pb_dir_shadow;
+ REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, 7, 1);
+#endif
+
+ /* wait some */
+
+ udelay(25);
+
+ /* de-assert bus-reset */
+
+#ifdef CONFIG_ETRAX_IDE_CSE1_16_RESET
+ REG_SHADOW_SET(port_cse1_addr, port_cse1_shadow, 16, 1);
+#endif
+#ifdef CONFIG_ETRAX_IDE_CSP0_8_RESET
+ REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, 8, 1);
+#endif
+#ifdef CONFIG_ETRAX_IDE_G27_RESET
+ REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, 27, 1);
+#endif
+
+ /* make a dummy read to set the ata controller in a proper state */
+ dummy = *R_ATA_STATUS_DATA;
+
+ *R_ATA_CONFIG = ( IO_FIELD( R_ATA_CONFIG, enable, 1 ) |
+ IO_FIELD( R_ATA_CONFIG, dma_strobe, ATA_DMA2_STROBE ) |
+ IO_FIELD( R_ATA_CONFIG, dma_hold, ATA_DMA2_HOLD ) |
+ IO_FIELD( R_ATA_CONFIG, pio_setup, ATA_PIO4_SETUP ) |
+ IO_FIELD( R_ATA_CONFIG, pio_strobe, ATA_PIO4_STROBE ) |
+ IO_FIELD( R_ATA_CONFIG, pio_hold, ATA_PIO4_HOLD ) );
+
+ *R_ATA_CTRL_DATA = ( IO_STATE( R_ATA_CTRL_DATA, rw, read) |
+ IO_FIELD( R_ATA_CTRL_DATA, addr, 1 ) );
+
+ while(*R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy)); /* wait for busy flag*/
+
+ *R_IRQ_MASK0_SET = ( IO_STATE( R_IRQ_MASK0_SET, ata_irq0, set ) |
+ IO_STATE( R_IRQ_MASK0_SET, ata_irq1, set ) |
+ IO_STATE( R_IRQ_MASK0_SET, ata_irq2, set ) |
+ IO_STATE( R_IRQ_MASK0_SET, ata_irq3, set ) );
+
+ printk("ide: waiting %d seconds for drives to regain consciousness\n",
+ CONFIG_ETRAX_IDE_DELAY);
+
+ h = jiffies + (CONFIG_ETRAX_IDE_DELAY * HZ);
+ while(time_before(jiffies, h)) /* nothing */ ;
+
+ /* reset the dma channels we will use */
+
+ RESET_DMA(ATA_TX_DMA_NBR);
+ RESET_DMA(ATA_RX_DMA_NBR);
+ WAIT_DMA(ATA_TX_DMA_NBR);
+ WAIT_DMA(ATA_RX_DMA_NBR);
+
+}
+
+static int e100_dma_off (ide_drive_t *drive)
+{
+ return 0;
+}
+
+static etrax_dma_descr mydescr;
+
+/*
+ * The following routines are mainly used by the ATAPI drivers.
+ *
+ * These routines will round up any request for an odd number of bytes,
+ * so if an odd bytecount is specified, be sure that there's at least one
+ * extra byte allocated for the buffer.
+ */
+static void
+e100_atapi_input_bytes (ide_drive_t *drive, void *buffer, unsigned int bytecount)
+{
+ unsigned long data_reg = IDE_DATA_REG;
+
+ D(printk("atapi_input_bytes, dreg 0x%x, buffer 0x%x, count %d\n",
+ data_reg, buffer, bytecount));
+
+ if(bytecount & 1) {
+ printk("warning, odd bytecount in cdrom_in_bytes = %d.\n", bytecount);
+ bytecount++; /* to round off */
+ }
+
+ /* make sure the DMA channel is available */
+ RESET_DMA(ATA_RX_DMA_NBR);
+ WAIT_DMA(ATA_RX_DMA_NBR);
+
+ /* setup DMA descriptor */
+
+ mydescr.sw_len = bytecount;
+ mydescr.ctrl = d_eol;
+ mydescr.buf = virt_to_phys(buffer);
+
+ /* start the dma channel */
+
+ *R_DMA_CH3_FIRST = virt_to_phys(&mydescr);
+ *R_DMA_CH3_CMD = IO_STATE(R_DMA_CH3_CMD, cmd, start);
+
+ /* initiate a multi word dma read using PIO handshaking */
+
+ *R_ATA_TRANSFER_CNT = IO_FIELD(R_ATA_TRANSFER_CNT, count, bytecount >> 1);
+
+ *R_ATA_CTRL_DATA = data_reg |
+ IO_STATE(R_ATA_CTRL_DATA, rw, read) |
+ IO_STATE(R_ATA_CTRL_DATA, src_dst, dma) |
+ IO_STATE(R_ATA_CTRL_DATA, handsh, pio) |
+ IO_STATE(R_ATA_CTRL_DATA, multi, on) |
+ IO_STATE(R_ATA_CTRL_DATA, dma_size, word);
+
+ /* wait for completion */
+
+ LED_DISK_READ(1);
+ WAIT_DMA(ATA_RX_DMA_NBR);
+ LED_DISK_READ(0);
+
+#if 0
+ /* old polled transfer code
+ * this should be moved into a new function that can do polled
+ * transfers if DMA is not available
+ */
+
+ /* initiate a multi word read */
+
+ *R_ATA_TRANSFER_CNT = wcount << 1;
+
+ *R_ATA_CTRL_DATA = data_reg |
+ IO_STATE(R_ATA_CTRL_DATA, rw, read) |
+ IO_STATE(R_ATA_CTRL_DATA, src_dst, register) |
+ IO_STATE(R_ATA_CTRL_DATA, handsh, pio) |
+ IO_STATE(R_ATA_CTRL_DATA, multi, on) |
+ IO_STATE(R_ATA_CTRL_DATA, dma_size, word);
+
+ /* svinto has a latency until the busy bit actually is set */
+
+ nop(); nop();
+ nop(); nop();
+ nop(); nop();
+ nop(); nop();
+ nop(); nop();
+
+ /* unit should be busy during multi transfer */
+ while((status = *R_ATA_STATUS_DATA) & IO_MASK(R_ATA_STATUS_DATA, busy)) {
+ while(!(status & IO_MASK(R_ATA_STATUS_DATA, dav)))
+ status = *R_ATA_STATUS_DATA;
+ *ptr++ = (unsigned short)(status & 0xffff);
+ }
+#endif
+}
+
+static void
+e100_atapi_output_bytes (ide_drive_t *drive, void *buffer, unsigned int bytecount)
+{
+ unsigned long data_reg = IDE_DATA_REG;
+
+ D(printk("atapi_output_bytes, dreg 0x%x, buffer 0x%x, count %d\n",
+ data_reg, buffer, bytecount));
+
+ if(bytecount & 1) {
+ printk("odd bytecount %d in atapi_out_bytes!\n", bytecount);
+ bytecount++;
+ }
+
+ /* make sure the DMA channel is available */
+ RESET_DMA(ATA_TX_DMA_NBR);
+ WAIT_DMA(ATA_TX_DMA_NBR);
+
+ /* setup DMA descriptor */
+
+ mydescr.sw_len = bytecount;
+ mydescr.ctrl = d_eol;
+ mydescr.buf = virt_to_phys(buffer);
+
+ /* start the dma channel */
+
+ *R_DMA_CH2_FIRST = virt_to_phys(&mydescr);
+ *R_DMA_CH2_CMD = IO_STATE(R_DMA_CH2_CMD, cmd, start);
+
+ /* initiate a multi word dma write using PIO handshaking */
+
+ *R_ATA_TRANSFER_CNT = IO_FIELD(R_ATA_TRANSFER_CNT, count, bytecount >> 1);
+
+ *R_ATA_CTRL_DATA = data_reg |
+ IO_STATE(R_ATA_CTRL_DATA, rw, write) |
+ IO_STATE(R_ATA_CTRL_DATA, src_dst, dma) |
+ IO_STATE(R_ATA_CTRL_DATA, handsh, pio) |
+ IO_STATE(R_ATA_CTRL_DATA, multi, on) |
+ IO_STATE(R_ATA_CTRL_DATA, dma_size, word);
+
+ /* wait for completion */
+
+ LED_DISK_WRITE(1);
+ WAIT_DMA(ATA_TX_DMA_NBR);
+ LED_DISK_WRITE(0);
+
+#if 0
+ /* old polled write code - see comment in input_bytes */
+
+ /* wait for busy flag */
+ while(*R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy));
+
+ /* initiate a multi word write */
+
+ *R_ATA_TRANSFER_CNT = bytecount >> 1;
+
+ ctrl = data_reg |
+ IO_STATE(R_ATA_CTRL_DATA, rw, write) |
+ IO_STATE(R_ATA_CTRL_DATA, src_dst, register) |
+ IO_STATE(R_ATA_CTRL_DATA, handsh, pio) |
+ IO_STATE(R_ATA_CTRL_DATA, multi, on) |
+ IO_STATE(R_ATA_CTRL_DATA, dma_size, word);
+
+ LED_DISK_WRITE(1);
+
+ /* Etrax will set busy = 1 until the multi pio transfer has finished
+ * and tr_rdy = 1 after each successful word transfer.
+ * When the last byte has been transferred Etrax will first set tr_tdy = 1
+ * and then busy = 0 (not in the same cycle). If we read busy before it
+ * has been set to 0 we will think that we should transfer more bytes
+ * and then tr_rdy would be 0 forever. This is solved by checking busy
+ * in the inner loop.
+ */
+
+ do {
+ *R_ATA_CTRL_DATA = ctrl | *ptr++;
+ while(!(*R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, tr_rdy)) &&
+ (*R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy)));
+ } while(*R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy));
+
+ LED_DISK_WRITE(0);
+#endif
+
+}
+
+/*
+ * This is used for most PIO data transfers *from* the IDE interface
+ */
+static void
+e100_ide_input_data (ide_drive_t *drive, void *buffer, unsigned int wcount)
+{
+ e100_atapi_input_bytes(drive, buffer, wcount << 2);
+}
+
+/*
+ * This is used for most PIO data transfers *to* the IDE interface
+ */
+static void
+e100_ide_output_data (ide_drive_t *drive, void *buffer, unsigned int wcount)
+{
+ e100_atapi_output_bytes(drive, buffer, wcount << 2);
+}
+
+/* we only have one DMA channel on the chip for ATA, so we can keep these statically */
+static etrax_dma_descr ata_descrs[MAX_DMA_DESCRS];
+static unsigned int ata_tot_size;
+
+/*
+ * e100_ide_build_dmatable() prepares a dma request.
+ * Returns 0 if all went okay, returns 1 otherwise.
+ */
+static int e100_ide_build_dmatable (ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct scatterlist* sg;
+ struct request *rq = HWGROUP(drive)->rq;
+ unsigned long size, addr;
+ unsigned int count = 0;
+ int i = 0;
+
+ sg = hwif->sg_table;
+
+ ata_tot_size = 0;
+
+ ide_map_sg(drive, rq);
+
+ i = hwif->sg_nents;
+
+ while(i) {
+ /*
+ * Determine addr and size of next buffer area. We assume that
+ * individual virtual buffers are always composed linearly in
+ * physical memory. For example, we assume that any 8kB buffer
+ * is always composed of two adjacent physical 4kB pages rather
+ * than two possibly non-adjacent physical 4kB pages.
+ */
+ /* group sequential buffers into one large buffer */
+ addr = page_to_phys(sg->page) + sg->offset;
+ size = sg_dma_len(sg);
+ while (sg++, --i) {
+ if ((addr + size) != page_to_phys(sg->page) + sg->offset)
+ break;
+ size += sg_dma_len(sg);
+ }
+
+ /* did we run out of descriptors? */
+
+ if(count >= MAX_DMA_DESCRS) {
+ printk("%s: too few DMA descriptors\n", drive->name);
+ return 1;
+ }
+
+ /* however, this case is more difficult - R_ATA_TRANSFER_CNT cannot be more
+ than 65536 words per transfer, so in that case we need to either
+ 1) use a DMA interrupt to re-trigger R_ATA_TRANSFER_CNT and continue with
+ the descriptors, or
+ 2) simply do the request here, and get dma_intr to only ide_end_request on
+ those blocks that were actually set-up for transfer.
+ */
+
+ if(ata_tot_size + size > 131072) {
+ printk("too large total ATA DMA request, %d + %d!\n", ata_tot_size, (int)size);
+ return 1;
+ }
+
+ /* If size > 65536 it has to be splitted into new descriptors. Since we don't handle
+ size > 131072 only one split is necessary */
+
+ if(size > 65536) {
+ /* ok we want to do IO at addr, size bytes. set up a new descriptor entry */
+ ata_descrs[count].sw_len = 0; /* 0 means 65536, this is a 16-bit field */
+ ata_descrs[count].ctrl = 0;
+ ata_descrs[count].buf = addr;
+ ata_descrs[count].next = virt_to_phys(&ata_descrs[count + 1]);
+ count++;
+ ata_tot_size += 65536;
+ /* size and addr should refere to not handled data */
+ size -= 65536;
+ addr += 65536;
+ }
+ /* ok we want to do IO at addr, size bytes. set up a new descriptor entry */
+ if(size == 65536) {
+ ata_descrs[count].sw_len = 0; /* 0 means 65536, this is a 16-bit field */
+ } else {
+ ata_descrs[count].sw_len = size;
+ }
+ ata_descrs[count].ctrl = 0;
+ ata_descrs[count].buf = addr;
+ ata_descrs[count].next = virt_to_phys(&ata_descrs[count + 1]);
+ count++;
+ ata_tot_size += size;
+ }
+
+ if (count) {
+ /* set the end-of-list flag on the last descriptor */
+ ata_descrs[count - 1].ctrl |= d_eol;
+ /* return and say all is ok */
+ return 0;
+ }
+
+ printk("%s: empty DMA table?\n", drive->name);
+ return 1; /* let the PIO routines handle this weirdness */
+}
+
+static int config_drive_for_dma (ide_drive_t *drive)
+{
+ const char **list;
+ struct hd_driveid *id = drive->id;
+
+ if (id && (id->capability & 1)) {
+ /* Enable DMA on any drive that supports mword2 DMA */
+ if ((id->field_valid & 2) && (id->dma_mword & 0x404) == 0x404) {
+ drive->using_dma = 1;
+ return 0; /* DMA enabled */
+ }
+
+ /* Consult the list of known "good" drives */
+ list = good_dma_drives;
+ while (*list) {
+ if (!strcmp(*list++,id->model)) {
+ drive->using_dma = 1;
+ return 0; /* DMA enabled */
+ }
+ }
+ }
+ return 1; /* DMA not enabled */
+}
+
+/*
+ * etrax_dma_intr() is the handler for disk read/write DMA interrupts
+ */
+static ide_startstop_t etrax_dma_intr (ide_drive_t *drive)
+{
+ LED_DISK_READ(0);
+ LED_DISK_WRITE(0);
+
+ return ide_dma_intr(drive);
+}
+
+/*
+ * Functions below initiates/aborts DMA read/write operations on a drive.
+ *
+ * The caller is assumed to have selected the drive and programmed the drive's
+ * sector address using CHS or LBA. All that remains is to prepare for DMA
+ * and then issue the actual read/write DMA/PIO command to the drive.
+ *
+ * Returns 0 if all went well.
+ * Returns 1 if DMA read/write could not be started, in which case
+ * the caller should revert to PIO for the current request.
+ */
+
+static int e100_dma_check(ide_drive_t *drive)
+{
+ return config_drive_for_dma (drive);
+}
+
+static int e100_dma_end(ide_drive_t *drive)
+{
+ /* TODO: check if something went wrong with the DMA */
+ return 0;
+}
+
+static void e100_dma_start(ide_drive_t *drive)
+{
+ if (e100_read_command) {
+ /* begin DMA */
+
+ /* need to do this before RX DMA due to a chip bug
+ * it is enough to just flush the part of the cache that
+ * corresponds to the buffers we start, but since HD transfers
+ * usually are more than 8 kB, it is easier to optimize for the
+ * normal case and just flush the entire cache. its the only
+ * way to be sure! (OB movie quote)
+ */
+ flush_etrax_cache();
+ *R_DMA_CH3_FIRST = virt_to_phys(ata_descrs);
+ *R_DMA_CH3_CMD = IO_STATE(R_DMA_CH3_CMD, cmd, start);
+
+ /* initiate a multi word dma read using DMA handshaking */
+
+ *R_ATA_TRANSFER_CNT =
+ IO_FIELD(R_ATA_TRANSFER_CNT, count, ata_tot_size >> 1);
+
+ *R_ATA_CTRL_DATA =
+ IO_FIELD(R_ATA_CTRL_DATA, data, IDE_DATA_REG) |
+ IO_STATE(R_ATA_CTRL_DATA, rw, read) |
+ IO_STATE(R_ATA_CTRL_DATA, src_dst, dma) |
+ IO_STATE(R_ATA_CTRL_DATA, handsh, dma) |
+ IO_STATE(R_ATA_CTRL_DATA, multi, on) |
+ IO_STATE(R_ATA_CTRL_DATA, dma_size, word);
+
+ LED_DISK_READ(1);
+
+ D(printk("dma read of %d bytes.\n", ata_tot_size));
+
+ } else {
+ /* writing */
+ /* begin DMA */
+
+ *R_DMA_CH2_FIRST = virt_to_phys(ata_descrs);
+ *R_DMA_CH2_CMD = IO_STATE(R_DMA_CH2_CMD, cmd, start);
+
+ /* initiate a multi word dma write using DMA handshaking */
+
+ *R_ATA_TRANSFER_CNT =
+ IO_FIELD(R_ATA_TRANSFER_CNT, count, ata_tot_size >> 1);
+
+ *R_ATA_CTRL_DATA =
+ IO_FIELD(R_ATA_CTRL_DATA, data, IDE_DATA_REG) |
+ IO_STATE(R_ATA_CTRL_DATA, rw, write) |
+ IO_STATE(R_ATA_CTRL_DATA, src_dst, dma) |
+ IO_STATE(R_ATA_CTRL_DATA, handsh, dma) |
+ IO_STATE(R_ATA_CTRL_DATA, multi, on) |
+ IO_STATE(R_ATA_CTRL_DATA, dma_size, word);
+
+ LED_DISK_WRITE(1);
+
+ D(printk("dma write of %d bytes.\n", ata_tot_size));
+ }
+}