Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (59 commits)
  ide-floppy: do not complete rq's prematurely
  ide: be able to build pmac driver without IDE built-in
  ide-pmac: IDE cable detection on Apple PowerBook
  ide: inline SELECT_DRIVE()
  ide: turn selectproc() method into dev_select() method (take 5)
  MAINTAINERS: move old ide-{floppy,tape} entries to CREDITS (take 2)
  ide: move data register access out of tf_{read|load}() methods (take 2)
  ide: call {in|out}put_data() methods from tf_{read|load}() methods (take 2)
  ide-io-std: shorten ide_{in|out}put_data()
  ide: rename IDE_TFLAG_IN_[HOB_]FEATURE
  ide: turn set_irq() method into write_devctl() method
  ide: use ATA_HOB
  ide-disk: use ATA_ERR
  ide: add support for CFA specified transfer modes (take 3)
  ide-iops: only clear DMA words on setting DMA mode
  ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3)
  au1xxx-ide: auide_{in|out}sw() should be static
  ide-floppy: use ide_pio_bytes()
  ide-{floppy,tape}: fix padding for PIO transfers
  ide: remove CONFIG_BLK_DEV_IDEDOUBLER config option
  ...

1 files changed, 12 insertions, 22 deletions

diff --git a/drivers/ide/ide-h8300.c b/drivers/ide/ide-h8300.c
index ff8339ed59a..dac9a6d4496 100644
--- a/drivers/ide/ide-h8300.c
+++ b/drivers/ide/ide-h8300.c
@@ -54,9 +54,6 @@ static void h8300_tf_load(ide_drive_t *drive, struct ide_cmd *cmd)
 	if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED)
 		HIHI = 0xFF;
 
-	if (cmd->ftf_flags & IDE_FTFLAG_OUT_DATA)
-		mm_outw((tf->hob_data << 8) | tf->data, io_ports->data_addr);
-
 	if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
 		outb(tf->hob_feature, io_ports->feature_addr);
 	if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
@@ -90,18 +87,11 @@ static void h8300_tf_read(ide_drive_t *drive, struct ide_cmd *cmd)
 	struct ide_io_ports *io_ports = &hwif->io_ports;
 	struct ide_taskfile *tf = &cmd->tf;
 
-	if (cmd->ftf_flags & IDE_FTFLAG_IN_DATA) {
-		u16 data = mm_inw(io_ports->data_addr);
-
-		tf->data = data & 0xff;
-		tf->hob_data = (data >> 8) & 0xff;
-	}
-
 	/* be sure we're looking at the low order bits */
-	outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
+	outb(ATA_DEVCTL_OBS, io_ports->ctl_addr);
 
-	if (cmd->tf_flags & IDE_TFLAG_IN_FEATURE)
-		tf->feature = inb(io_ports->feature_addr);
+	if (cmd->tf_flags & IDE_TFLAG_IN_ERROR)
+		tf->error  = inb(io_ports->feature_addr);
 	if (cmd->tf_flags & IDE_TFLAG_IN_NSECT)
 		tf->nsect  = inb(io_ports->nsect_addr);
 	if (cmd->tf_flags & IDE_TFLAG_IN_LBAL)
@@ -114,18 +104,18 @@ static void h8300_tf_read(ide_drive_t *drive, struct ide_cmd *cmd)
 		tf->device = inb(io_ports->device_addr);
 
 	if (cmd->tf_flags & IDE_TFLAG_LBA48) {
-		outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
+		outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr);
 
-		if (cmd->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
-			tf->hob_feature = inb(io_ports->feature_addr);
+		if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR)
+			tf->hob_error = inb(io_ports->feature_addr);
 		if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
-			tf->hob_nsect   = inb(io_ports->nsect_addr);
+			tf->hob_nsect = inb(io_ports->nsect_addr);
 		if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
-			tf->hob_lbal    = inb(io_ports->lbal_addr);
+			tf->hob_lbal  = inb(io_ports->lbal_addr);
 		if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
-			tf->hob_lbam    = inb(io_ports->lbam_addr);
+			tf->hob_lbam  = inb(io_ports->lbam_addr);
 		if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
-			tf->hob_lbah    = inb(io_ports->lbah_addr);
+			tf->hob_lbah  = inb(io_ports->lbah_addr);
 	}
 }
 
@@ -159,9 +149,9 @@ static const struct ide_tp_ops h8300_tp_ops = {
 	.exec_command		= ide_exec_command,
 	.read_status		= ide_read_status,
 	.read_altstatus		= ide_read_altstatus,
+	.write_devctl		= ide_write_devctl,
 
-	.set_irq		= ide_set_irq,
-
+	.dev_select		= ide_dev_select,
 	.tf_load		= h8300_tf_load,
 	.tf_read		= h8300_tf_read,