ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2 files changed, 0 insertions, 1738 deletions

diff --git a/drivers/ide/ppc/Makefile b/drivers/ide/ppc/Makefile
deleted file mode 100644
index 74e52adcdf4..00000000000
--- a/drivers/ide/ppc/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-
-obj-$(CONFIG_BLK_DEV_IDE_PMAC)		+= pmac.o
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
deleted file mode 100644
index 2e19d629853..00000000000
--- a/drivers/ide/ppc/pmac.c
+++ /dev/null
@@ -1,1736 +0,0 @@
-/*
- * Support for IDE interfaces on PowerMacs.
- *
- * These IDE interfaces are memory-mapped and have a DBDMA channel
- * for doing DMA.
- *
- *  Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt
- *  Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- * Some code taken from drivers/ide/ide-dma.c:
- *
- *  Copyright (c) 1995-1998  Mark Lord
- *
- * TODO: - Use pre-calculated (kauai) timing tables all the time and
- * get rid of the "rounded" tables used previously, so we have the
- * same table format for all controllers and can then just have one
- * big table
- * 
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#include <linux/scatterlist.h>
-
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/dbdma.h>
-#include <asm/ide.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <asm/sections.h>
-#include <asm/irq.h>
-
-#ifndef CONFIG_PPC64
-#include <asm/mediabay.h>
-#endif
-
-#define DRV_NAME "ide-pmac"
-
-#undef IDE_PMAC_DEBUG
-
-#define DMA_WAIT_TIMEOUT	50
-
-typedef struct pmac_ide_hwif {
-	unsigned long			regbase;
-	int				irq;
-	int				kind;
-	int				aapl_bus_id;
-	unsigned			mediabay : 1;
-	unsigned			broken_dma : 1;
-	unsigned			broken_dma_warn : 1;
-	struct device_node*		node;
-	struct macio_dev		*mdev;
-	u32				timings[4];
-	volatile u32 __iomem *		*kauai_fcr;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-	/* Those fields are duplicating what is in hwif. We currently
-	 * can't use the hwif ones because of some assumptions that are
-	 * beeing done by the generic code about the kind of dma controller
-	 * and format of the dma table. This will have to be fixed though.
-	 */
-	volatile struct dbdma_regs __iomem *	dma_regs;
-	struct dbdma_cmd*		dma_table_cpu;
-#endif
-	
-} pmac_ide_hwif_t;
-
-enum {
-	controller_ohare,	/* OHare based */
-	controller_heathrow,	/* Heathrow/Paddington */
-	controller_kl_ata3,	/* KeyLargo ATA-3 */
-	controller_kl_ata4,	/* KeyLargo ATA-4 */
-	controller_un_ata6,	/* UniNorth2 ATA-6 */
-	controller_k2_ata6,	/* K2 ATA-6 */
-	controller_sh_ata6,	/* Shasta ATA-6 */
-};
-
-static const char* model_name[] = {
-	"OHare ATA",		/* OHare based */
-	"Heathrow ATA",		/* Heathrow/Paddington */
-	"KeyLargo ATA-3",	/* KeyLargo ATA-3 (MDMA only) */
-	"KeyLargo ATA-4",	/* KeyLargo ATA-4 (UDMA/66) */
-	"UniNorth ATA-6",	/* UniNorth2 ATA-6 (UDMA/100) */
-	"K2 ATA-6",		/* K2 ATA-6 (UDMA/100) */
-	"Shasta ATA-6",		/* Shasta ATA-6 (UDMA/133) */
-};
-
-/*
- * Extra registers, both 32-bit little-endian
- */
-#define IDE_TIMING_CONFIG	0x200
-#define IDE_INTERRUPT		0x300
-
-/* Kauai (U2) ATA has different register setup */
-#define IDE_KAUAI_PIO_CONFIG	0x200
-#define IDE_KAUAI_ULTRA_CONFIG	0x210
-#define IDE_KAUAI_POLL_CONFIG	0x220
-
-/*
- * Timing configuration register definitions
- */
-
-/* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */
-#define SYSCLK_TICKS(t)		(((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS)
-#define SYSCLK_TICKS_66(t)	(((t) + IDE_SYSCLK_66_NS - 1) / IDE_SYSCLK_66_NS)
-#define IDE_SYSCLK_NS		30	/* 33Mhz cell */
-#define IDE_SYSCLK_66_NS	15	/* 66Mhz cell */
-
-/* 133Mhz cell, found in shasta.
- * See comments about 100 Mhz Uninorth 2...
- * Note that PIO_MASK and MDMA_MASK seem to overlap
- */
-#define TR_133_PIOREG_PIO_MASK		0xff000fff
-#define TR_133_PIOREG_MDMA_MASK		0x00fff800
-#define TR_133_UDMAREG_UDMA_MASK	0x0003ffff
-#define TR_133_UDMAREG_UDMA_EN		0x00000001
-
-/* 100Mhz cell, found in Uninorth 2. I don't have much infos about
- * this one yet, it appears as a pci device (106b/0033) on uninorth
- * internal PCI bus and it's clock is controlled like gem or fw. It
- * appears to be an evolution of keylargo ATA4 with a timing register
- * extended to 2 32bits registers and a similar DBDMA channel. Other
- * registers seem to exist but I can't tell much about them.
- * 
- * So far, I'm using pre-calculated tables for this extracted from
- * the values used by the MacOS X driver.
- * 
- * The "PIO" register controls PIO and MDMA timings, the "ULTRA"
- * register controls the UDMA timings. At least, it seems bit 0
- * of this one enables UDMA vs. MDMA, and bits 4..7 are the
- * cycle time in units of 10ns. Bits 8..15 are used by I don't
- * know their meaning yet
- */
-#define TR_100_PIOREG_PIO_MASK		0xff000fff
-#define TR_100_PIOREG_MDMA_MASK		0x00fff000
-#define TR_100_UDMAREG_UDMA_MASK	0x0000ffff
-#define TR_100_UDMAREG_UDMA_EN		0x00000001
-
-
-/* 66Mhz cell, found in KeyLargo. Can do ultra mode 0 to 2 on
- * 40 connector cable and to 4 on 80 connector one.
- * Clock unit is 15ns (66Mhz)
- * 
- * 3 Values can be programmed:
- *  - Write data setup, which appears to match the cycle time. They
- *    also call it DIOW setup.
- *  - Ready to pause time (from spec)
- *  - Address setup. That one is weird. I don't see where exactly
- *    it fits in UDMA cycles, I got it's name from an obscure piece
- *    of commented out code in Darwin. They leave it to 0, we do as
- *    well, despite a comment that would lead to think it has a
- *    min value of 45ns.
- * Apple also add 60ns to the write data setup (or cycle time ?) on
- * reads.
- */
-#define TR_66_UDMA_MASK			0xfff00000
-#define TR_66_UDMA_EN			0x00100000 /* Enable Ultra mode for DMA */
-#define TR_66_UDMA_ADDRSETUP_MASK	0xe0000000 /* Address setup */
-#define TR_66_UDMA_ADDRSETUP_SHIFT	29
-#define TR_66_UDMA_RDY2PAUS_MASK	0x1e000000 /* Ready 2 pause time */
-#define TR_66_UDMA_RDY2PAUS_SHIFT	25
-#define TR_66_UDMA_WRDATASETUP_MASK	0x01e00000 /* Write data setup time */
-#define TR_66_UDMA_WRDATASETUP_SHIFT	21
-#define TR_66_MDMA_MASK			0x000ffc00
-#define TR_66_MDMA_RECOVERY_MASK	0x000f8000
-#define TR_66_MDMA_RECOVERY_SHIFT	15
-#define TR_66_MDMA_ACCESS_MASK		0x00007c00
-#define TR_66_MDMA_ACCESS_SHIFT		10
-#define TR_66_PIO_MASK			0x000003ff
-#define TR_66_PIO_RECOVERY_MASK		0x000003e0
-#define TR_66_PIO_RECOVERY_SHIFT	5
-#define TR_66_PIO_ACCESS_MASK		0x0000001f
-#define TR_66_PIO_ACCESS_SHIFT		0
-
-/* 33Mhz cell, found in OHare, Heathrow (& Paddington) and KeyLargo
- * Can do pio & mdma modes, clock unit is 30ns (33Mhz)
- * 
- * The access time and recovery time can be programmed. Some older
- * Darwin code base limit OHare to 150ns cycle time. I decided to do
- * the same here fore safety against broken old hardware ;)
- * The HalfTick bit, when set, adds half a clock (15ns) to the access
- * time and removes one from recovery. It's not supported on KeyLargo
- * implementation afaik. The E bit appears to be set for PIO mode 0 and
- * is used to reach long timings used in this mode.
- */
-#define TR_33_MDMA_MASK			0x003ff800
-#define TR_33_MDMA_RECOVERY_MASK	0x001f0000
-#define TR_33_MDMA_RECOVERY_SHIFT	16
-#define TR_33_MDMA_ACCESS_MASK		0x0000f800
-#define TR_33_MDMA_ACCESS_SHIFT		11
-#define TR_33_MDMA_HALFTICK		0x00200000
-#define TR_33_PIO_MASK			0x000007ff
-#define TR_33_PIO_E			0x00000400
-#define TR_33_PIO_RECOVERY_MASK		0x000003e0
-#define TR_33_PIO_RECOVERY_SHIFT	5
-#define TR_33_PIO_ACCESS_MASK		0x0000001f
-#define TR_33_PIO_ACCESS_SHIFT		0
-
-/*
- * Interrupt register definitions
- */
-#define IDE_INTR_DMA			0x80000000
-#define IDE_INTR_DEVICE			0x40000000
-
-/*
- * FCR Register on Kauai. Not sure what bit 0x4 is  ...
- */
-#define KAUAI_FCR_UATA_MAGIC		0x00000004
-#define KAUAI_FCR_UATA_RESET_N		0x00000002
-#define KAUAI_FCR_UATA_ENABLE		0x00000001
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
-/* Rounded Multiword DMA timings
- * 
- * I gave up finding a generic formula for all controller
- * types and instead, built tables based on timing values
- * used by Apple in Darwin's implementation.
- */
-struct mdma_timings_t {
-	int	accessTime;
-	int	recoveryTime;
-	int	cycleTime;
-};
-
-struct mdma_timings_t mdma_timings_33[] =
-{
-    { 240, 240, 480 },
-    { 180, 180, 360 },
-    { 135, 135, 270 },
-    { 120, 120, 240 },
-    { 105, 105, 210 },
-    {  90,  90, 180 },
-    {  75,  75, 150 },
-    {  75,  45, 120 },
-    {   0,   0,   0 }
-};
-
-struct mdma_timings_t mdma_timings_33k[] =
-{
-    { 240, 240, 480 },
-    { 180, 180, 360 },
-    { 150, 150, 300 },
-    { 120, 120, 240 },
-    {  90, 120, 210 },
-    {  90,  90, 180 },
-    {  90,  60, 150 },
-    {  90,  30, 120 },
-    {   0,   0,   0 }
-};
-
-struct mdma_timings_t mdma_timings_66[] =
-{
-    { 240, 240, 480 },
-    { 180, 180, 360 },
-    { 135, 135, 270 },
-    { 120, 120, 240 },
-    { 105, 105, 210 },
-    {  90,  90, 180 },
-    {  90,  75, 165 },
-    {  75,  45, 120 },
-    {   0,   0,   0 }
-};
-
-/* KeyLargo ATA-4 Ultra DMA timings (rounded) */
-struct {
-	int	addrSetup; /* ??? */
-	int	rdy2pause;
-	int	wrDataSetup;
-} kl66_udma_timings[] =
-{
-    {   0, 180,  120 },	/* Mode 0 */
-    {   0, 150,  90 },	/*      1 */
-    {   0, 120,  60 },	/*      2 */
-    {   0, 90,   45 },	/*      3 */
-    {   0, 90,   30 }	/*      4 */
-};
-
-/* UniNorth 2 ATA/100 timings */
-struct kauai_timing {
-	int	cycle_time;
-	u32	timing_reg;
-};
-
-static struct kauai_timing	kauai_pio_timings[] =
-{
-	{ 930	, 0x08000fff },
-	{ 600	, 0x08000a92 },
-	{ 383	, 0x0800060f },
-	{ 360	, 0x08000492 },
-	{ 330	, 0x0800048f },
-	{ 300	, 0x080003cf },
-	{ 270	, 0x080003cc },
-	{ 240	, 0x0800038b },
-	{ 239	, 0x0800030c },
-	{ 180	, 0x05000249 },
-	{ 120	, 0x04000148 },
-	{ 0	, 0 },
-};
-
-static struct kauai_timing	kauai_mdma_timings[] =
-{
-	{ 1260	, 0x00fff000 },
-	{ 480	, 0x00618000 },
-	{ 360	, 0x00492000 },
-	{ 270	, 0x0038e000 },
-	{ 240	, 0x0030c000 },
-	{ 210	, 0x002cb000 },
-	{ 180	, 0x00249000 },
-	{ 150	, 0x00209000 },
-	{ 120	, 0x00148000 },
-	{ 0	, 0 },
-};
-
-static struct kauai_timing	kauai_udma_timings[] =
-{
-	{ 120	, 0x000070c0 },
-	{ 90	, 0x00005d80 },
-	{ 60	, 0x00004a60 },
-	{ 45	, 0x00003a50 },
-	{ 30	, 0x00002a30 },
-	{ 20	, 0x00002921 },
-	{ 0	, 0 },
-};
-
-static struct kauai_timing	shasta_pio_timings[] =
-{
-	{ 930	, 0x08000fff },
-	{ 600	, 0x0A000c97 },
-	{ 383	, 0x07000712 },
-	{ 360	, 0x040003cd },
-	{ 330	, 0x040003cd },
-	{ 300	, 0x040003cd },
-	{ 270	, 0x040003cd },
-	{ 240	, 0x040003cd },
-	{ 239	, 0x040003cd },
-	{ 180	, 0x0400028b },
-	{ 120	, 0x0400010a },
-	{ 0	, 0 },
-};
-
-static struct kauai_timing	shasta_mdma_timings[] =
-{
-	{ 1260	, 0x00fff000 },
-	{ 480	, 0x00820800 },
-	{ 360	, 0x00820800 },
-	{ 270	, 0x00820800 },
-	{ 240	, 0x00820800 },
-	{ 210	, 0x00820800 },
-	{ 180	, 0x00820800 },
-	{ 150	, 0x0028b000 },
-	{ 120	, 0x001ca000 },
-	{ 0	, 0 },
-};
-
-static struct kauai_timing	shasta_udma133_timings[] =
-{
-	{ 120   , 0x00035901, },
-	{ 90    , 0x000348b1, },
-	{ 60    , 0x00033881, },
-	{ 45    , 0x00033861, },
-	{ 30    , 0x00033841, },
-	{ 20    , 0x00033031, },
-	{ 15    , 0x00033021, },
-	{ 0	, 0 },
-};
-
-
-static inline u32
-kauai_lookup_timing(struct kauai_timing* table, int cycle_time)
-{
-	int i;
-	
-	for (i=0; table[i].cycle_time; i++)
-		if (cycle_time > table[i+1].cycle_time)
-			return table[i].timing_reg;
-	BUG();
-	return 0;
-}
-
-/* allow up to 256 DBDMA commands per xfer */
-#define MAX_DCMDS		256
-
-/* 
- * Wait 1s for disk to answer on IDE bus after a hard reset
- * of the device (via GPIO/FCR).
- * 
- * Some devices seem to "pollute" the bus even after dropping
- * the BSY bit (typically some combo drives slave on the UDMA
- * bus) after a hard reset. Since we hard reset all drives on
- * KeyLargo ATA66, we have to keep that delay around. I may end
- * up not hard resetting anymore on these and keep the delay only
- * for older interfaces instead (we have to reset when coming
- * from MacOS...) --BenH. 
- */
-#define IDE_WAKEUP_DELAY	(1*HZ)
-
-static int pmac_ide_init_dma(ide_hwif_t *, const struct ide_port_info *);
-static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq);
-static void pmac_ide_selectproc(ide_drive_t *drive);
-static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
-
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-
-#define PMAC_IDE_REG(x) \
-	((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
-
-/*
- * Apply the timings of the proper unit (master/slave) to the shared
- * timing register when selecting that unit. This version is for
- * ASICs with a single timing register
- */
-static void
-pmac_ide_selectproc(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
-
-	if (drive->dn & 1)
-		writel(pmif->timings[1], PMAC_IDE_REG(IDE_TIMING_CONFIG));
-	else
-		writel(pmif->timings[0], PMAC_IDE_REG(IDE_TIMING_CONFIG));
-	(void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG));
-}
-
-/*
- * Apply the timings of the proper unit (master/slave) to the shared
- * timing register when selecting that unit. This version is for
- * ASICs with a dual timing register (Kauai)
- */
-static void
-pmac_ide_kauai_selectproc(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
-
-	if (drive->dn & 1) {
-		writel(pmif->timings[1], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG));
-		writel(pmif->timings[3], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG));
-	} else {
-		writel(pmif->timings[0], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG));
-		writel(pmif->timings[2], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG));
-	}
-	(void)readl(PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG));
-}
-
-/*
- * Force an update of controller timing values for a given drive
- */
-static void
-pmac_ide_do_update_timings(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
-
-	if (pmif->kind == controller_sh_ata6 ||
-	    pmif->kind == controller_un_ata6 ||
-	    pmif->kind == controller_k2_ata6)
-		pmac_ide_kauai_selectproc(drive);
-	else
-		pmac_ide_selectproc(drive);
-}
-
-static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd)
-{
-	writeb(cmd, (void __iomem *)hwif->io_ports.command_addr);
-	(void)readl((void __iomem *)(hwif->io_ports.data_addr
-				     + IDE_TIMING_CONFIG));
-}
-
-static void pmac_set_irq(ide_hwif_t *hwif, int on)
-{
-	u8 ctl = ATA_DEVCTL_OBS;
-
-	if (on == 4) { /* hack for SRST */
-		ctl |= 4;
-		on &= ~4;
-	}
-
-	ctl |= on ? 0 : 2;
-
-	writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr);
-	(void)readl((void __iomem *)(hwif->io_ports.data_addr
-				     + IDE_TIMING_CONFIG));
-}
-
-/*
- * Old tuning functions (called on hdparm -p), sets up drive PIO timings
- */
-static void
-pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
-	struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio);
-	u32 *timings, t;
-	unsigned accessTicks, recTicks;
-	unsigned accessTime, recTime;
-	unsigned int cycle_time;
-
-	/* which drive is it ? */
-	timings = &pmif->timings[drive->dn & 1];
-	t = *timings;
-
-	cycle_time = ide_pio_cycle_time(drive, pio);
-
-	switch (pmif->kind) {
-	case controller_sh_ata6: {
-		/* 133Mhz cell */
-		u32 tr = kauai_lookup_timing(shasta_pio_timings, cycle_time);
-		t = (t & ~TR_133_PIOREG_PIO_MASK) | tr;
-		break;
-		}
-	case controller_un_ata6:
-	case controller_k2_ata6: {
-		/* 100Mhz cell */
-		u32 tr = kauai_lookup_timing(kauai_pio_timings, cycle_time);
-		t = (t & ~TR_100_PIOREG_PIO_MASK) | tr;
-		break;
-		}
-	case controller_kl_ata4:
-		/* 66Mhz cell */
-		recTime = cycle_time - tim->active - tim->setup;
-		recTime = max(recTime, 150U);
-		accessTime = tim->active;
-		accessTime = max(accessTime, 150U);
-		accessTicks = SYSCLK_TICKS_66(accessTime);
-		accessTicks = min(accessTicks, 0x1fU);
-		recTicks = SYSCLK_TICKS_66(recTime);
-		recTicks = min(recTicks, 0x1fU);
-		t = (t & ~TR_66_PIO_MASK) |
-			(accessTicks << TR_66_PIO_ACCESS_SHIFT) |
-			(recTicks << TR_66_PIO_RECOVERY_SHIFT);
-		break;
-	default: {
-		/* 33Mhz cell */
-		int ebit = 0;
-		recTime = cycle_time - tim->active - tim->setup;
-		recTime = max(recTime, 150U);
-		accessTime = tim->active;
-		accessTime = max(accessTime, 150U);
-		accessTicks = SYSCLK_TICKS(accessTime);
-		accessTicks = min(accessTicks, 0x1fU);
-		accessTicks = max(accessTicks, 4U);
-		recTicks = SYSCLK_TICKS(recTime);
-		recTicks = min(recTicks, 0x1fU);
-		recTicks = max(recTicks, 5U) - 4;
-		if (recTicks > 9) {
-			recTicks--; /* guess, but it's only for PIO0, so... */
-			ebit = 1;
-		}
-		t = (t & ~TR_33_PIO_MASK) |
-				(accessTicks << TR_33_PIO_ACCESS_SHIFT) |
-				(recTicks << TR_33_PIO_RECOVERY_SHIFT);
-		if (ebit)
-			t |= TR_33_PIO_E;
-		break;
-		}
-	}
-
-#ifdef IDE_PMAC_DEBUG
-	printk(KERN_ERR "%s: Set PIO timing for mode %d, reg: 0x%08x\n",
-		drive->name, pio,  *timings);
-#endif	
-
-	*timings = t;
-	pmac_ide_do_update_timings(drive);
-}
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
-/*
- * Calculate KeyLargo ATA/66 UDMA timings
- */
-static int
-set_timings_udma_ata4(u32 *timings, u8 speed)
-{
-	unsigned rdyToPauseTicks, wrDataSetupTicks, addrTicks;
-
-	if (speed > XFER_UDMA_4)
-		return 1;
-
-	rdyToPauseTicks = SYSCLK_TICKS_66(kl66_udma_timings[speed & 0xf].rdy2pause);
-	wrDataSetupTicks = SYSCLK_TICKS_66(kl66_udma_timings[speed & 0xf].wrDataSetup);
-	addrTicks = SYSCLK_TICKS_66(kl66_udma_timings[speed & 0xf].addrSetup);
-
-	*timings = ((*timings) & ~(TR_66_UDMA_MASK | TR_66_MDMA_MASK)) |
-			(wrDataSetupTicks << TR_66_UDMA_WRDATASETUP_SHIFT) | 
-			(rdyToPauseTicks << TR_66_UDMA_RDY2PAUS_SHIFT) |
-			(addrTicks <<TR_66_UDMA_ADDRSETUP_SHIFT) |
-			TR_66_UDMA_EN;
-#ifdef IDE_PMAC_DEBUG
-	printk(KERN_ERR "ide_pmac: Set UDMA timing for mode %d, reg: 0x%08x\n",
-		speed & 0xf,  *timings);
-#endif	
-
-	return 0;
-}
-
-/*
- * Calculate Kauai ATA/100 UDMA timings
- */
-static int
-set_timings_udma_ata6(u32 *pio_timings, u32 *ultra_timings, u8 speed)
-{
-	struct ide_timing *t = ide_timing_find_mode(speed);
-	u32 tr;
-
-	if (speed > XFER_UDMA_5 || t == NULL)
-		return 1;
-	tr = kauai_lookup_timing(kauai_udma_timings, (int)t->udma);
-	*ultra_timings = ((*ultra_timings) & ~TR_100_UDMAREG_UDMA_MASK) | tr;
-	*ultra_timings = (*ultra_timings) | TR_100_UDMAREG_UDMA_EN;
-
-	return 0;
-}
-
-/*
- * Calculate Shasta ATA/133 UDMA timings
- */
-static int
-set_timings_udma_shasta(u32 *pio_timings, u32 *ultra_timings, u8 speed)
-{
-	struct ide_timing *t = ide_timing_find_mode(speed);
-	u32 tr;
-
-	if (speed > XFER_UDMA_6 || t == NULL)
-		return 1;
-	tr = kauai_lookup_timing(shasta_udma133_timings, (int)t->udma);
-	*ultra_timings = ((*ultra_timings) & ~TR_133_UDMAREG_UDMA_MASK) | tr;
-	*ultra_timings = (*ultra_timings) | TR_133_UDMAREG_UDMA_EN;
-
-	return 0;
-}
-
-/*
- * Calculate MDMA timings for all cells
- */
-static void
-set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
-		 	u8 speed)
-{
-	u16 *id = drive->id;
-	int cycleTime, accessTime = 0, recTime = 0;
-	unsigned accessTicks, recTicks;
-	struct mdma_timings_t* tm = NULL;
-	int i;
-
-	/* Get default cycle time for mode */
-	switch(speed & 0xf) {
-		case 0: cycleTime = 480; break;
-		case 1: cycleTime = 150; break;
-		case 2: cycleTime = 120; break;
-		default:
-			BUG();
-			break;
-	}
-
-	/* Check if drive provides explicit DMA cycle time */
-	if ((id[ATA_ID_FIELD_VALID] & 2) && id[ATA_ID_EIDE_DMA_TIME])
-		cycleTime = max_t(int, id[ATA_ID_EIDE_DMA_TIME], cycleTime);
-
-	/* OHare limits according to some old Apple sources */	
-	if ((intf_type == controller_ohare) && (cycleTime < 150))
-		cycleTime = 150;
-	/* Get the proper timing array for this controller */
-	switch(intf_type) {
-	        case controller_sh_ata6:
-		case controller_un_ata6:
-		case controller_k2_ata6:
-			break;
-		case controller_kl_ata4:
-			tm = mdma_timings_66;
-			break;
-		case controller_kl_ata3:
-			tm = mdma_timings_33k;
-			break;
-		default:
-			tm = mdma_timings_33;
-			break;
-	}
-	if (tm != NULL) {
-		/* Lookup matching access & recovery times */
-		i = -1;
-		for (;;) {
-			if (tm[i+1].cycleTime < cycleTime)
-				break;
-			i++;
-		}
-		cycleTime = tm[i].cycleTime;
-		accessTime = tm[i].accessTime;
-		recTime = tm[i].recoveryTime;
-
-#ifdef IDE_PMAC_DEBUG
-		printk(KERN_ERR "%s: MDMA, cycleTime: %d, accessTime: %d, recTime: %d\n",
-			drive->name, cycleTime, accessTime, recTime);
-#endif
-	}
-	switch(intf_type) {
-	case controller_sh_ata6: {
-		/* 133Mhz cell */
-		u32 tr = kauai_lookup_timing(shasta_mdma_timings, cycleTime);
-		*timings = ((*timings) & ~TR_133_PIOREG_MDMA_MASK) | tr;
-		*timings2 = (*timings2) & ~TR_133_UDMAREG_UDMA_EN;
-		}
-	case controller_un_ata6:
-	case controller_k2_ata6: {
-		/* 100Mhz cell */
-		u32 tr = kauai_lookup_timing(kauai_mdma_timings, cycleTime);
-		*timings = ((*timings) & ~TR_100_PIOREG_MDMA_MASK) | tr;
-		*timings2 = (*timings2) & ~TR_100_UDMAREG_UDMA_EN;
-		}
-		break;
-	case controller_kl_ata4:
-		/* 66Mhz cell */
-		accessTicks = SYSCLK_TICKS_66(accessTime);
-		accessTicks = min(accessTicks, 0x1fU);
-		accessTicks = max(accessTicks, 0x1U);
-		recTicks = SYSCLK_TICKS_66(recTime);
-		recTicks = min(recTicks, 0x1fU);
-		recTicks = max(recTicks, 0x3U);
-		/* Clear out mdma bits and disable udma */
-		*timings = ((*timings) & ~(TR_66_MDMA_MASK | TR_66_UDMA_MASK)) |
-			(accessTicks << TR_66_MDMA_ACCESS_SHIFT) |
-			(recTicks << TR_66_MDMA_RECOVERY_SHIFT);
-		break;
-	case controller_kl_ata3:
-		/* 33Mhz cell on KeyLargo */
-		accessTicks = SYSCLK_TICKS(accessTime);
-		accessTicks = max(accessTicks, 1U);
-		accessTicks = min(accessTicks, 0x1fU);
-		accessTime = accessTicks * IDE_SYSCLK_NS;
-		recTicks = SYSCLK_TICKS(recTime);
-		recTicks = max(recTicks, 1U);
-		recTicks = min(recTicks, 0x1fU);
-		*timings = ((*timings) & ~TR_33_MDMA_MASK) |
-				(accessTicks << TR_33_MDMA_ACCESS_SHIFT) |
-				(recTicks << TR_33_MDMA_RECOVERY_SHIFT);
-		break;
-	default: {
-		/* 33Mhz cell on others */
-		int halfTick = 0;
-		int origAccessTime = accessTime;
-		int origRecTime = recTime;
-		
-		accessTicks = SYSCLK_TICKS(accessTime);
-		accessTicks = max(accessTicks, 1U);
-		accessTicks = min(accessTicks, 0x1fU);
-		accessTime = accessTicks * IDE_SYSCLK_NS;
-		recTicks = SYSCLK_TICKS(recTime);
-		recTicks = max(recTicks, 2U) - 1;
-		recTicks = min(recTicks, 0x1fU);
-		recTime = (recTicks + 1) * IDE_SYSCLK_NS;
-		if ((accessTicks > 1) &&
-		    ((accessTime - IDE_SYSCLK_NS/2) >= origAccessTime) &&
-		    ((recTime - IDE_SYSCLK_NS/2) >= origRecTime)) {
-            		halfTick = 1;
-			accessTicks--;
-		}
-		*timings = ((*timings) & ~TR_33_MDMA_MASK) |
-				(accessTicks << TR_33_MDMA_ACCESS_SHIFT) |
-				(recTicks << TR_33_MDMA_RECOVERY_SHIFT);
-		if (halfTick)
-			*timings |= TR_33_MDMA_HALFTICK;
-		}
-	}
-#ifdef IDE_PMAC_DEBUG
-	printk(KERN_ERR "%s: Set MDMA timing for mode %d, reg: 0x%08x\n",
-		drive->name, speed & 0xf,  *timings);
-#endif	
-}
-#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
-
-static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
-	int ret = 0;
-	u32 *timings, *timings2, tl[2];
-	u8 unit = drive->dn & 1;
-
-	timings = &pmif->timings[unit];
-	timings2 = &pmif->timings[unit+2];
-
-	/* Copy timings to local image */
-	tl[0] = *timings;
-	tl[1] = *timings2;
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-	if (speed >= XFER_UDMA_0) {
-		if (pmif->kind == controller_kl_ata4)
-			ret = set_timings_udma_ata4(&tl[0], speed);
-		else if (pmif->kind == controller_un_ata6
-			 || pmif->kind == controller_k2_ata6)
-			ret = set_timings_udma_ata6(&tl[0], &tl[1], speed);
-		else if (pmif->kind == controller_sh_ata6)
-			ret = set_timings_udma_shasta(&tl[0], &tl[1], speed);
-		else
-			ret = -1;
-	} else
-		set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-	if (ret)
-		return;
-
-	/* Apply timings to controller */
-	*timings = tl[0];
-	*timings2 = tl[1];
-
-	pmac_ide_do_update_timings(drive);	
-}
-
-/*
- * Blast some well known "safe" values to the timing registers at init or
- * wakeup from sleep time, before we do real calculation
- */
-static void
-sanitize_timings(pmac_ide_hwif_t *pmif)
-{
-	unsigned int value, value2 = 0;
-	
-	switch(pmif->kind) {
-		case controller_sh_ata6:
-			value = 0x0a820c97;
-			value2 = 0x00033031;
-			break;
-		case controller_un_ata6:
-		case controller_k2_ata6:
-			value = 0x08618a92;
-			value2 = 0x00002921;
-			break;
-		case controller_kl_ata4:
-			value = 0x0008438c;
-			break;
-		case controller_kl_ata3:
-			value = 0x00084526;
-			break;
-		case controller_heathrow:
-		case controller_ohare:
-		default:
-			value = 0x00074526;
-			break;
-	}
-	pmif->timings[0] = pmif->timings[1] = value;
-	pmif->timings[2] = pmif->timings[3] = value2;
-}
-
-/* Suspend call back, should be called after the child devices
- * have actually been suspended
- */
-static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif)
-{
-	/* We clear the timings */
-	pmif->timings[0] = 0;
-	pmif->timings[1] = 0;
-	
-	disable_irq(pmif->irq);
-
-	/* The media bay will handle itself just fine */
-	if (pmif->mediabay)
-		return 0;
-	
-	/* Kauai has bus control FCRs directly here */
-	if (pmif->kauai_fcr) {
-		u32 fcr = readl(pmif->kauai_fcr);
-		fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE);
-		writel(fcr, pmif->kauai_fcr);
-	}
-
-	/* Disable the bus on older machines and the cell on kauai */
-	ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id,
-			    0);
-
-	return 0;
-}
-
-/* Resume call back, should be called before the child devices
- * are resumed
- */
-static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif)
-{
-	/* Hard reset & re-enable controller (do we really need to reset ? -BenH) */
-	if (!pmif->mediabay) {
-		ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 1);
-		ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 1);
-		msleep(10);
-		ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 0);
-
-		/* Kauai has it different */
-		if (pmif->kauai_fcr) {
-			u32 fcr = readl(pmif->kauai_fcr);
-			fcr |= KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE;
-			writel(fcr, pmif->kauai_fcr);
-		}
-
-		msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY));
-	}
-
-	/* Sanitize drive timings */
-	sanitize_timings(pmif);
-
-	enable_irq(pmif->irq);
-
-	return 0;
-}
-
-static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
-{
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
-	struct device_node *np = pmif->node;
-	const char *cable = of_get_property(np, "cable-type", NULL);
-
-	/* Get cable type from device-tree. */
-	if (cable && !strncmp(cable, "80-", 3))
-		return ATA_CBL_PATA80;
-
-	/*
-	 * G5's seem to have incorrect cable type in device-tree.
-	 * Let's assume they have a 80 conductor cable, this seem
-	 * to be always the case unless the user mucked around.
-	 */
-	if (of_device_is_compatible(np, "K2-UATA") ||
-	    of_device_is_compatible(np, "shasta-ata"))
-		return ATA_CBL_PATA80;
-
-	return ATA_CBL_PATA40;
-}
-
-static void pmac_ide_init_dev(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
-
-	if (pmif->mediabay) {
-#ifdef CONFIG_PMAC_MEDIABAY
-		if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) {
-			drive->dev_flags &= ~IDE_DFLAG_NOPROBE;
-			return;
-		}
-#endif
-		drive->dev_flags |= IDE_DFLAG_NOPROBE;
-	}
-}
-
-static const struct ide_tp_ops pmac_tp_ops = {
-	.exec_command		= pmac_exec_command,
-	.read_status		= ide_read_status,
-	.read_altstatus		= ide_read_altstatus,
-	.read_sff_dma_status	= ide_read_sff_dma_status,
-
-	.set_irq		= pmac_set_irq,
-
-	.tf_load		= ide_tf_load,
-	.tf_read		= ide_tf_read,
-
-	.input_data		= ide_input_data,
-	.output_data		= ide_output_data,
-};
-
-static const struct ide_port_ops pmac_ide_ata6_port_ops = {
-	.init_dev		= pmac_ide_init_dev,
-	.set_pio_mode		= pmac_ide_set_pio_mode,
-	.set_dma_mode		= pmac_ide_set_dma_mode,
-	.selectproc		= pmac_ide_kauai_selectproc,
-	.cable_detect		= pmac_ide_cable_detect,
-};
-
-static const struct ide_port_ops pmac_ide_ata4_port_ops = {
-	.init_dev		= pmac_ide_init_dev,
-	.set_pio_mode		= pmac_ide_set_pio_mode,
-	.set_dma_mode		= pmac_ide_set_dma_mode,
-	.selectproc		= pmac_ide_selectproc,
-	.cable_detect		= pmac_ide_cable_detect,
-};
-
-static const struct ide_port_ops pmac_ide_port_ops = {
-	.init_dev		= pmac_ide_init_dev,
-	.set_pio_mode		= pmac_ide_set_pio_mode,
-	.set_dma_mode		= pmac_ide_set_dma_mode,
-	.selectproc		= pmac_ide_selectproc,
-};
-
-static const struct ide_dma_ops pmac_dma_ops;
-
-static const struct ide_port_info pmac_port_info = {
-	.name			= DRV_NAME,
-	.init_dma		= pmac_ide_init_dma,
-	.chipset		= ide_pmac,
-	.tp_ops			= &pmac_tp_ops,
-	.port_ops		= &pmac_ide_port_ops,
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-	.dma_ops		= &pmac_dma_ops,
-#endif
-	.host_flags		= IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
-				  IDE_HFLAG_POST_SET_MODE |
-				  IDE_HFLAG_MMIO |
-				  IDE_HFLAG_UNMASK_IRQS,
-	.pio_mask		= ATA_PIO4,
-	.mwdma_mask		= ATA_MWDMA2,
-};
-
-/*
- * Setup, register & probe an IDE channel driven by this driver, this is
- * called by one of the 2 probe functions (macio or PCI).
- */
-static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
-{
-	struct device_node *np = pmif->node;
-	const int *bidp;
-	struct ide_host *host;
-	ide_hwif_t *hwif;
-	hw_regs_t *hws[] = { hw, NULL, NULL, NULL };
-	struct ide_port_info d = pmac_port_info;
-	int rc;
-
-	pmif->broken_dma = pmif->broken_dma_warn = 0;
-	if (of_device_is_compatible(np, "shasta-ata")) {
-		pmif->kind = controller_sh_ata6;
-		d.port_ops = &pmac_ide_ata6_port_ops;
-		d.udma_mask = ATA_UDMA6;
-	} else if (of_device_is_compatible(np, "kauai-ata")) {
-		pmif->kind = controller_un_ata6;
-		d.port_ops = &pmac_ide_ata6_port_ops;
-		d.udma_mask = ATA_UDMA5;
-	} else if (of_device_is_compatible(np, "K2-UATA")) {
-		pmif->kind = controller_k2_ata6;
-		d.port_ops = &pmac_ide_ata6_port_ops;
-		d.udma_mask = ATA_UDMA5;
-	} else if (of_device_is_compatible(np, "keylargo-ata")) {
-		if (strcmp(np->name, "ata-4") == 0) {
-			pmif->kind = controller_kl_ata4;
-			d.port_ops = &pmac_ide_ata4_port_ops;
-			d.udma_mask = ATA_UDMA4;
-		} else
-			pmif->kind = controller_kl_ata3;
-	} else if (of_device_is_compatible(np, "heathrow-ata")) {
-		pmif->kind = controller_heathrow;
-	} else {
-		pmif->kind = controller_ohare;
-		pmif->broken_dma = 1;
-	}
-
-	bidp = of_get_property(np, "AAPL,bus-id", NULL);
-	pmif->aapl_bus_id =  bidp ? *bidp : 0;
-
-	/* On Kauai-type controllers, we make sure the FCR is correct */
-	if (pmif->kauai_fcr)
-		writel(KAUAI_FCR_UATA_MAGIC |
-		       KAUAI_FCR_UATA_RESET_N |
-		       KAUAI_FCR_UATA_ENABLE, pmif->kauai_fcr);
-
-	pmif->mediabay = 0;
-	
-	/* Make sure we have sane timings */
-	sanitize_timings(pmif);
-
-	host = ide_host_alloc(&d, hws);
-	if (host == NULL)
-		return -ENOMEM;
-	hwif = host->ports[0];
-
-#ifndef CONFIG_PPC64
-	/* XXX FIXME: Media bay stuff need re-organizing */
-	if (np->parent && np->parent->name
-	    && strcasecmp(np->parent->name, "media-bay") == 0) {
-#ifdef CONFIG_PMAC_MEDIABAY
-		media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq,
-					hwif);
-#endif /* CONFIG_PMAC_MEDIABAY */
-		pmif->mediabay = 1;
-		if (!bidp)
-			pmif->aapl_bus_id = 1;
-	} else if (pmif->kind == controller_ohare) {
-		/* The code below is having trouble on some ohare machines
-		 * (timing related ?). Until I can put my hand on one of these
-		 * units, I keep the old way
-		 */
-		ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, 0, 1);
-	} else
-#endif
-	{
- 		/* This is necessary to enable IDE when net-booting */
-		ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 1);
-		ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmif->aapl_bus_id, 1);
-		msleep(10);
-		ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 0);
-		msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY));
-	}
-
-	printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), "
-			 "bus ID %d%s, irq %d\n", model_name[pmif->kind],
-			 pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
-			 pmif->mediabay ? " (mediabay)" : "", hw->irq);
-
-	rc = ide_host_register(host, &d, hws);
-	if (rc) {
-		ide_host_free(host);
-		return rc;
-	}
-
-	return 0;
-}
-
-static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base)
-{
-	int i;
-
-	for (i = 0; i < 8; ++i)
-		hw->io_ports_array[i] = base + i * 0x10;
-
-	hw->io_ports.ctl_addr = base + 0x160;
-}
-
-/*
- * Attach to a macio probed interface
- */
-static int __devinit
-pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
-{
-	void __iomem *base;
-	unsigned long regbase;
-	pmac_ide_hwif_t *pmif;
-	int irq, rc;
-	hw_regs_t hw;
-
-	pmif = kzalloc(sizeof(*pmif), GFP_KERNEL);
-	if (pmif == NULL)
-		return -ENOMEM;
-
-	if (macio_resource_count(mdev) == 0) {
-		printk(KERN_WARNING "ide-pmac: no address for %s\n",
-				    mdev->ofdev.node->full_name);
-		rc = -ENXIO;
-		goto out_free_pmif;
-	}
-
-	/* Request memory resource for IO ports */
-	if (macio_request_resource(mdev, 0, "ide-pmac (ports)")) {
-		printk(KERN_ERR "ide-pmac: can't request MMIO resource for "
-				"%s!\n", mdev->ofdev.node->full_name);
-		rc = -EBUSY;
-		goto out_free_pmif;
-	}
-			
-	/* XXX This is bogus. Should be fixed in the registry by checking
-	 * the kind of host interrupt controller, a bit like gatwick
-	 * fixes in irq.c. That works well enough for the single case
-	 * where that happens though...
-	 */
-	if (macio_irq_count(mdev) == 0) {
-		printk(KERN_WARNING "ide-pmac: no intrs for device %s, using "
-				    "13\n", mdev->ofdev.node->full_name);
-		irq = irq_create_mapping(NULL, 13);
-	} else
-		irq = macio_irq(mdev, 0);
-
-	base = ioremap(macio_resource_start(mdev, 0), 0x400);
-	regbase = (unsigned long) base;
-
-	pmif->mdev = mdev;
-	pmif->node = mdev->ofdev.node;
-	pmif->regbase = regbase;
-	pmif->irq = irq;
-	pmif->kauai_fcr = NULL;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-	if (macio_resource_count(mdev) >= 2) {
-		if (macio_request_resource(mdev, 1, "ide-pmac (dma)"))
-			printk(KERN_WARNING "ide-pmac: can't request DMA "
-					    "resource for %s!\n",
-					    mdev->ofdev.node->full_name);
-		else
-			pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000);
-	} else
-		pmif->dma_regs = NULL;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-	dev_set_drvdata(&mdev->ofdev.dev, pmif);
-
-	memset(&hw, 0, sizeof(hw));
-	pmac_ide_init_ports(&hw, pmif->regbase);
-	hw.irq = irq;
-	hw.dev = &mdev->bus->pdev->dev;
-	hw.parent = &mdev->ofdev.dev;
-
-	rc = pmac_ide_setup_device(pmif, &hw);
-	if (rc != 0) {
-		/* The inteface is released to the common IDE layer */
-		dev_set_drvdata(&mdev->ofdev.dev, NULL);
-		iounmap(base);
-		if (pmif->dma_regs) {
-			iounmap(pmif->dma_regs);
-			macio_release_resource(mdev, 1);
-		}
-		macio_release_resource(mdev, 0);
-		kfree(pmif);
-	}
-
-	return rc;
-
-out_free_pmif:
-	kfree(pmif);
-	return rc;
-}
-
-static int
-pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg)
-{
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
-	int rc = 0;
-
-	if (mesg.event != mdev->ofdev.dev.power.power_state.event
-			&& (mesg.event & PM_EVENT_SLEEP)) {
-		rc = pmac_ide_do_suspend(pmif);
-		if (rc == 0)
-			mdev->ofdev.dev.power.power_state = mesg;
-	}
-
-	return rc;
-}
-
-static int
-pmac_ide_macio_resume(struct macio_dev *mdev)
-{
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
-	int rc = 0;
-
-	if (mdev->ofdev.dev.power.power_state.event != PM_EVENT_ON) {
-		rc = pmac_ide_do_resume(pmif);
-		if (rc == 0)
-			mdev->ofdev.dev.power.power_state = PMSG_ON;
-	}
-
-	return rc;
-}
-
-/*
- * Attach to a PCI probed interface
- */
-static int __devinit
-pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
-{
-	struct device_node *np;
-	pmac_ide_hwif_t *pmif;
-	void __iomem *base;
-	unsigned long rbase, rlen;
-	int rc;
-	hw_regs_t hw;
-
-	np = pci_device_to_OF_node(pdev);
-	if (np == NULL) {
-		printk(KERN_ERR "ide-pmac: cannot find MacIO node for Kauai ATA interface\n");
-		return -ENODEV;
-	}
-
-	pmif = kzalloc(sizeof(*pmif), GFP_KERNEL);
-	if (pmif == NULL)
-		return -ENOMEM;
-
-	if (pci_enable_device(pdev)) {
-		printk(KERN_WARNING "ide-pmac: Can't enable PCI device for "
-				    "%s\n", np->full_name);
-		rc = -ENXIO;
-		goto out_free_pmif;
-	}
-	pci_set_master(pdev);
-			
-	if (pci_request_regions(pdev, "Kauai ATA")) {
-		printk(KERN_ERR "ide-pmac: Cannot obtain PCI resources for "
-				"%s\n", np->full_name);
-		rc = -ENXIO;
-		goto out_free_pmif;
-	}
-
-	pmif->mdev = NULL;
-	pmif->node = np;
-
-	rbase = pci_resource_start(pdev, 0);
-	rlen = pci_resource_len(pdev, 0);
-
-	base = ioremap(rbase, rlen);
-	pmif->regbase = (unsigned long) base + 0x2000;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-	pmif->dma_regs = base + 0x1000;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-	pmif->kauai_fcr = base;
-	pmif->irq = pdev->irq;
-
-	pci_set_drvdata(pdev, pmif);
-
-	memset(&hw, 0, sizeof(hw));
-	pmac_ide_init_ports(&hw, pmif->regbase);
-	hw.irq = pdev->irq;
-	hw.dev = &pdev->dev;
-
-	rc = pmac_ide_setup_device(pmif, &hw);
-	if (rc != 0) {
-		/* The inteface is released to the common IDE layer */
-		pci_set_drvdata(pdev, NULL);
-		iounmap(base);
-		pci_release_regions(pdev);
-		kfree(pmif);
-	}
-
-	return rc;
-
-out_free_pmif:
-	kfree(pmif);
-	return rc;
-}
-
-static int
-pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
-{
-	pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev);
-	int rc = 0;
-
-	if (mesg.event != pdev->dev.power.power_state.event
-			&& (mesg.event & PM_EVENT_SLEEP)) {
-		rc = pmac_ide_do_suspend(pmif);
-		if (rc == 0)
-			pdev->dev.power.power_state = mesg;
-	}
-
-	return rc;
-}
-
-static int
-pmac_ide_pci_resume(struct pci_dev *pdev)
-{
-	pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev);
-	int rc = 0;
-
-	if (pdev->dev.power.power_state.event != PM_EVENT_ON) {
-		rc = pmac_ide_do_resume(pmif);
-		if (rc == 0)
-			pdev->dev.power.power_state = PMSG_ON;
-	}
-
-	return rc;
-}
-
-static struct of_device_id pmac_ide_macio_match[] = 
-{
-	{
-	.name 		= "IDE",
-	},
-	{
-	.name 		= "ATA",
-	},
-	{
-	.type		= "ide",
-	},
-	{
-	.type		= "ata",
-	},
-	{},
-};
-
-static struct macio_driver pmac_ide_macio_driver = 
-{
-	.name 		= "ide-pmac",
-	.match_table	= pmac_ide_macio_match,
-	.probe		= pmac_ide_macio_attach,
-	.suspend	= pmac_ide_macio_suspend,
-	.resume		= pmac_ide_macio_resume,
-};
-
-static const struct pci_device_id pmac_ide_pci_match[] = {
-	{ PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA),	0 },
-	{ PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100),	0 },
-	{ PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100),	0 },
-	{ PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_SH_ATA),	0 },
-	{ PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA),	0 },
-	{},
-};
-
-static struct pci_driver pmac_ide_pci_driver = {
-	.name		= "ide-pmac",
-	.id_table	= pmac_ide_pci_match,
-	.probe		= pmac_ide_pci_attach,
-	.suspend	= pmac_ide_pci_suspend,
-	.resume		= pmac_ide_pci_resume,
-};
-MODULE_DEVICE_TABLE(pci, pmac_ide_pci_match);
-
-int __init pmac_ide_probe(void)
-{
-	int error;
-
-	if (!machine_is(powermac))
-		return -ENODEV;
-
-#ifdef CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST
-	error = pci_register_driver(&pmac_ide_pci_driver);
-	if (error)
-		goto out;
-	error = macio_register_driver(&pmac_ide_macio_driver);
-	if (error) {
-		pci_unregister_driver(&pmac_ide_pci_driver);
-		goto out;
-	}
-#else
-	error = macio_register_driver(&pmac_ide_macio_driver);
-	if (error)
-		goto out;
-	error = pci_register_driver(&pmac_ide_pci_driver);
-	if (error) {
-		macio_unregister_driver(&pmac_ide_macio_driver);
-		goto out;
-	}
-#endif
-out:
-	return error;
-}
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
-/*
- * pmac_ide_build_dmatable builds the DBDMA command list
- * for a transfer and sets the DBDMA channel to point to it.
- */
-static int
-pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
-	struct dbdma_cmd *table;
-	int i, count = 0;
-	volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
-	struct scatterlist *sg;
-	int wr = (rq_data_dir(rq) == WRITE);
-
-	/* DMA table is already aligned */
-	table = (struct dbdma_cmd *) pmif->dma_table_cpu;
-
-	/* Make sure DMA controller is stopped (necessary ?) */
-	writel((RUN|PAUSE|FLUSH|WAKE|DEAD) << 16, &dma->control);
-	while (readl(&dma->status) & RUN)
-		udelay(1);
-
-	hwif->sg_nents = i = ide_build_sglist(drive, rq);
-
-	if (!i)
-		return 0;
-
-	/* Build DBDMA commands list */
-	sg = hwif->sg_table;
-	while (i && sg_dma_len(sg)) {
-		u32 cur_addr;
-		u32 cur_len;
-
-		cur_addr = sg_dma_address(sg);
-		cur_len = sg_dma_len(sg);
-
-		if (pmif->broken_dma && cur_addr & (L1_CACHE_BYTES - 1)) {
-			if (pmif->broken_dma_warn == 0) {
-				printk(KERN_WARNING "%s: DMA on non aligned address, "
-				       "switching to PIO on Ohare chipset\n", drive->name);
-				pmif->broken_dma_warn = 1;
-			}
-			goto use_pio_instead;
-		}
-		while (cur_len) {
-			unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;
-
-			if (count++ >= MAX_DCMDS) {
-				printk(KERN_WARNING "%s: DMA table too small\n",
-				       drive->name);
-				goto use_pio_instead;
-			}
-			st_le16(&table->command, wr? OUTPUT_MORE: INPUT_MORE);
-			st_le16(&table->req_count, tc);
-			st_le32(&table->phy_addr, cur_addr);
-			table->cmd_dep = 0;
-			table->xfer_status = 0;
-			table->res_count = 0;
-			cur_addr += tc;
-			cur_len -= tc;
-			++table;
-		}
-		sg = sg_next(sg);
-		i--;
-	}
-
-	/* convert the last command to an input/output last command */
-	if (count) {
-		st_le16(&table[-1].command, wr? OUTPUT_LAST: INPUT_LAST);
-		/* add the stop command to the end of the list */
-		memset(table, 0, sizeof(struct dbdma_cmd));
-		st_le16(&table->command, DBDMA_STOP);
-		mb();
-		writel(hwif->dmatable_dma, &dma->cmdptr);
-		return 1;
-	}
-
-	printk(KERN_DEBUG "%s: empty DMA table?\n", drive->name);
-
-use_pio_instead:
-	ide_destroy_dmatable(drive);
-
-	return 0; /* revert to PIO for this request */
-}
-
-/*
- * Prepare a DMA transfer. We build the DMA table, adjust the timings for
- * a read on KeyLargo ATA/66 and mark us as waiting for DMA completion
- */
-static int
-pmac_ide_dma_setup(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
-	struct request *rq = HWGROUP(drive)->rq;
-	u8 unit = drive->dn & 1, ata4 = (pmif->kind == controller_kl_ata4);
-
-	if (!pmac_ide_build_dmatable(drive, rq)) {
-		ide_map_sg(drive, rq);
-		return 1;
-	}
-
-	/* Apple adds 60ns to wrDataSetup on reads */
-	if (ata4 && (pmif->timings[unit] & TR_66_UDMA_EN)) {
-		writel(pmif->timings[unit] + (!rq_data_dir(rq) ? 0x00800000UL : 0),
-			PMAC_IDE_REG(IDE_TIMING_CONFIG));
-		(void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG));
-	}
-
-	drive->waiting_for_dma = 1;
-
-	return 0;
-}
-
-static void
-pmac_ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
-{
-	/* issue cmd to drive */
-	ide_execute_command(drive, command, &ide_dma_intr, 2*WAIT_CMD, NULL);
-}
-
-/*
- * Kick the DMA controller into life after the DMA command has been issued
- * to the drive.
- */
-static void
-pmac_ide_dma_start(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
-	volatile struct dbdma_regs __iomem *dma;
-
-	dma = pmif->dma_regs;
-
-	writel((RUN << 16) | RUN, &dma->control);
-	/* Make sure it gets to the controller right now */
-	(void)readl(&dma->control);
-}
-
-/*
- * After a DMA transfer, make sure the controller is stopped
- */
-static int
-pmac_ide_dma_end (ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
-	volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
-	u32 dstat;
-
-	drive->waiting_for_dma = 0;
-	dstat = readl(&dma->status);
-	writel(((RUN|WAKE|DEAD) << 16), &dma->control);
-
-	ide_destroy_dmatable(drive);
-
-	/* verify good dma status. we don't check for ACTIVE beeing 0. We should...
-	 * in theory, but with ATAPI decices doing buffer underruns, that would
-	 * cause us to disable DMA, which isn't what we want
-	 */
-	return (dstat & (RUN|DEAD)) != RUN;
-}
-
-/*
- * Check out that the interrupt we got was for us. We can't always know this
- * for sure with those Apple interfaces (well, we could on the recent ones but
- * that's not implemented yet), on the other hand, we don't have shared interrupts
- * so it's not really a problem
- */
-static int
-pmac_ide_dma_test_irq (ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
-	volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
-	unsigned long status, timeout;
-
-	/* We have to things to deal with here:
-	 * 
-	 * - The dbdma won't stop if the command was started
-	 * but completed with an error without transferring all
-	 * datas. This happens when bad blocks are met during
-	 * a multi-block transfer.
-	 * 
-	 * - The dbdma fifo hasn't yet finished flushing to
-	 * to system memory when the disk interrupt occurs.
-	 * 
-	 */
-
-	/* If ACTIVE is cleared, the STOP command have passed and
-	 * transfer is complete.
-	 */
-	status = readl(&dma->status);
-	if (!(status & ACTIVE))
-		return 1;
-
-	/* If dbdma didn't execute the STOP command yet, the
-	 * active bit is still set. We consider that we aren't
-	 * sharing interrupts (which is hopefully the case with
-	 * those controllers) and so we just try to flush the
-	 * channel for pending data in the fifo
-	 */
-	udelay(1);
-	writel((FLUSH << 16) | FLUSH, &dma->control);
-	timeout = 0;
-	for (;;) {
-		udelay(1);
-		status = readl(&dma->status);
-		if ((status & FLUSH) == 0)
-			break;
-		if (++timeout > 100) {
-			printk(KERN_WARNING "ide%d, ide_dma_test_irq \
-			timeout flushing channel\n", HWIF(drive)->index);
-			break;
-		}
-	}	
-	return 1;
-}
-
-static void pmac_ide_dma_host_set(ide_drive_t *drive, int on)
-{
-}
-
-static void
-pmac_ide_dma_lost_irq (ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
-	volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
-	unsigned long status = readl(&dma->status);
-
-	printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status);
-}
-
-static const struct ide_dma_ops pmac_dma_ops = {
-	.dma_host_set		= pmac_ide_dma_host_set,
-	.dma_setup		= pmac_ide_dma_setup,
-	.dma_exec_cmd		= pmac_ide_dma_exec_cmd,
-	.dma_start		= pmac_ide_dma_start,
-	.dma_end		= pmac_ide_dma_end,
-	.dma_test_irq		= pmac_ide_dma_test_irq,
-	.dma_timeout		= ide_dma_timeout,
-	.dma_lost_irq		= pmac_ide_dma_lost_irq,
-};
-
-/*
- * Allocate the data structures needed for using DMA with an interface
- * and fill the proper list of functions pointers
- */
-static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
-				       const struct ide_port_info *d)
-{
-	pmac_ide_hwif_t *pmif =
-		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-
-	/* We won't need pci_dev if we switch to generic consistent
-	 * DMA routines ...
-	 */
-	if (dev == NULL || pmif->dma_regs == 0)
-		return -ENODEV;
-	/*
-	 * Allocate space for the DBDMA commands.
-	 * The +2 is +1 for the stop command and +1 to allow for
-	 * aligning the start address to a multiple of 16 bytes.
-	 */
-	pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent(
-		dev,
-		(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
-		&hwif->dmatable_dma);
-	if (pmif->dma_table_cpu == NULL) {
-		printk(KERN_ERR "%s: unable to allocate DMA command list\n",
-		       hwif->name);
-		return -ENOMEM;
-	}
-
-	hwif->sg_max_nents = MAX_DCMDS;
-
-	return 0;
-}
-#else
-static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
-				       const struct ide_port_info *d)
-{
-	return -EOPNOTSUPP;
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-
-module_init(pmac_ide_probe);
-
-MODULE_LICENSE("GPL");