aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide
diff options
context:
space:
mode:
authorSergei Shtylyov <sshtylyov@ru.mvista.com>2007-07-09 23:17:55 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-07-09 23:17:55 +0200
commit83a6d4ab3b09c0c1921b657bbaac5ada3c9c3623 (patch)
tree21f86005466a0c9f87f60e13ffc3e7135e24818e /drivers/ide
parent2648e5d9a80d8a020feb343c52a8704e978e60c6 (diff)
cmd64x: init. code cleanup
Fix two minor issues with PCI0646 chip reporting in the init_chipset() method: "IRQ workaround enabled" message printed out not only for revision 0x01 and "CMD646: chipset revision" printed twice (by IDE core and the driver itself). Also, remove empty/pointless switch cases for the chips other than PCI0646, duplicate write to the MRDMODE register when enabling interrupts and MEMORY READ LINE cycles, and needless/misplaced initialization of the timing registers in this method. Switch to reading only the PCI revision ID register itself, not the whole 32 bits at its address in init_chipset() and init_hwif() methods; in addition, get rid of the useless clearing of hwif->autodma and perform some cosmetic style changes in the latter method. Refactor ata66_cmd64x() by moving all the code into the 'switch' statement, renaming/adding variables, and fixing the coding style. While at it, finally get rid of the meaningless aliasing register #define's... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide')
-rw-r--r--drivers/ide/pci/cmd64x.c126
1 files changed, 45 insertions, 81 deletions
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 7c57dc696f5..b0aa7d03b8a 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/cmd64x.c Version 1.47 Mar 19, 2007
+ * linux/drivers/ide/pci/cmd64x.c Version 1.50 May 10, 2007
*
* cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
* Due to massive hardware bugs, UltraDMA is only supported
@@ -52,9 +52,6 @@
#define ARTTIM23_DIS_RA2 0x04
#define ARTTIM23_DIS_RA3 0x08
#define ARTTIM23_INTR_CH1 0x10
-#define ARTTIM2 0x57
-#define ARTTIM3 0x57
-#define DRWTIM23 0x58
#define DRWTIM2 0x58
#define BRST 0x59
#define DRWTIM3 0x5b
@@ -469,71 +466,43 @@ static int cmd646_1_ide_dma_end (ide_drive_t *drive)
static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const char *name)
{
- u32 class_rev = 0;
u8 mrdmode = 0;
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xff;
+ if (dev->device == PCI_DEVICE_ID_CMD_646) {
+ u8 rev = 0;
- switch(dev->device) {
- case PCI_DEVICE_ID_CMD_643:
- break;
- case PCI_DEVICE_ID_CMD_646:
- printk(KERN_INFO "%s: chipset revision 0x%02X, ", name, class_rev);
- switch(class_rev) {
- case 0x07:
- case 0x05:
- printk("UltraDMA Capable");
- break;
- case 0x03:
- printk("MultiWord DMA Force Limited");
- break;
- case 0x01:
- default:
- printk("MultiWord DMA Limited, IRQ workaround enabled");
- break;
- }
- printk("\n");
- break;
- case PCI_DEVICE_ID_CMD_648:
- case PCI_DEVICE_ID_CMD_649:
+ pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
+
+ switch (rev) {
+ case 0x07:
+ case 0x05:
+ printk("%s: UltraDMA capable", name);
break;
+ case 0x03:
default:
+ printk("%s: MultiWord DMA force limited", name);
+ break;
+ case 0x01:
+ printk("%s: MultiWord DMA limited, "
+ "IRQ workaround enabled\n", name);
break;
+ }
}
/* Set a good latency timer and cache line size value. */
(void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
/* FIXME: pci_set_master() to ensure a good latency timer value */
- /* Setup interrupts. */
- (void) pci_read_config_byte(dev, MRDMODE, &mrdmode);
- mrdmode &= ~(0x30);
- (void) pci_write_config_byte(dev, MRDMODE, mrdmode);
-
- /* Use MEMORY READ LINE for reads.
- * NOTE: Although not mentioned in the PCI0646U specs,
- * these bits are write only and won't be read
- * back as set or not. The PCI0646U2 specs clarify
- * this point.
+ /*
+ * Enable interrupts, select MEMORY READ LINE for reads.
+ *
+ * NOTE: although not mentioned in the PCI0646U specs,
+ * bits 0-1 are write only and won't be read back as
+ * set or not -- PCI0646U2 specs clarify this point.
*/
- (void) pci_write_config_byte(dev, MRDMODE, mrdmode | 0x02);
-
- /* Set reasonable active/recovery/address-setup values. */
- (void) pci_write_config_byte(dev, ARTTIM0, 0x40);
- (void) pci_write_config_byte(dev, DRWTIM0, 0x3f);
- (void) pci_write_config_byte(dev, ARTTIM1, 0x40);
- (void) pci_write_config_byte(dev, DRWTIM1, 0x3f);
-#ifdef __i386__
- (void) pci_write_config_byte(dev, ARTTIM23, 0x1c);
-#else
- (void) pci_write_config_byte(dev, ARTTIM23, 0x5c);
-#endif
- (void) pci_write_config_byte(dev, DRWTIM23, 0x3f);
- (void) pci_write_config_byte(dev, DRWTIM3, 0x3f);
-#ifdef CONFIG_PPC
- (void) pci_write_config_byte(dev, UDIDETCR0, 0xf0);
-#endif /* CONFIG_PPC */
+ (void) pci_read_config_byte (dev, MRDMODE, &mrdmode);
+ mrdmode &= ~0x30;
+ (void) pci_write_config_byte(dev, MRDMODE, (mrdmode | 0x02));
#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS)
@@ -550,27 +519,25 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha
static unsigned int __devinit ata66_cmd64x(ide_hwif_t *hwif)
{
- u8 ata66 = 0, mask = (hwif->channel) ? 0x02 : 0x01;
+ struct pci_dev *dev = hwif->pci_dev;
+ u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01;
- switch(hwif->pci_dev->device) {
- case PCI_DEVICE_ID_CMD_643:
- case PCI_DEVICE_ID_CMD_646:
- return ata66;
- default:
- break;
+ switch (dev->device) {
+ case PCI_DEVICE_ID_CMD_648:
+ case PCI_DEVICE_ID_CMD_649:
+ pci_read_config_byte(dev, BMIDECSR, &bmidecsr);
+ return (bmidecsr & mask) ? 1 : 0;
+ default:
+ return 0;
}
- pci_read_config_byte(hwif->pci_dev, BMIDECSR, &ata66);
- return (ata66 & mask) ? 1 : 0;
}
static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
- unsigned int class_rev;
+ u8 rev = 0;
- hwif->autodma = 0;
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xff;
+ pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
hwif->tuneproc = &cmd64x_tune_drive;
hwif->speedproc = &cmd64x_tune_chipset;
@@ -580,8 +547,8 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
if (!hwif->dma_base)
return;
- hwif->atapi_dma = 1;
-
+ hwif->atapi_dma = 1;
+ hwif->mwdma_mask = 0x07;
hwif->ultra_mask = hwif->cds->udma_mask;
/*
@@ -596,16 +563,15 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
*
* So we only do UltraDMA on revision 0x05 and 0x07 chipsets.
*/
- if (dev->device == PCI_DEVICE_ID_CMD_646 && class_rev < 5)
+ if (dev->device == PCI_DEVICE_ID_CMD_646 && rev < 5)
hwif->ultra_mask = 0x00;
- hwif->mwdma_mask = 0x07;
-
hwif->ide_dma_check = &cmd64x_config_drive_for_dma;
- if (!(hwif->udma_four))
+
+ if (!hwif->udma_four)
hwif->udma_four = ata66_cmd64x(hwif);
- switch(dev->device) {
+ switch (dev->device) {
case PCI_DEVICE_ID_CMD_648:
case PCI_DEVICE_ID_CMD_649:
alt_irq_bits:
@@ -614,10 +580,10 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
break;
case PCI_DEVICE_ID_CMD_646:
hwif->chipset = ide_cmd646;
- if (class_rev == 0x01) {
+ if (rev == 0x01) {
hwif->ide_dma_end = &cmd646_1_ide_dma_end;
break;
- } else if (class_rev >= 0x03)
+ } else if (rev >= 0x03)
goto alt_irq_bits;
/* fall thru */
default:
@@ -626,11 +592,9 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
break;
}
-
if (!noautodma)
hwif->autodma = 1;
- hwif->drives[0].autodma = hwif->autodma;
- hwif->drives[1].autodma = hwif->autodma;
+ hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
}
static int __devinit init_setup_cmd64x(struct pci_dev *dev, ide_pci_device_t *d)