diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2008-04-28 17:30:26 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2008-04-28 17:30:26 -0700 |
commit | 8ab68ab420d5fc084b8cdd76a72df72c5e1cdb5d (patch) | |
tree | 6aef86d06a5eda99f09ac00c1af4084c2d49d2ac /drivers/ide | |
parent | f05c463be51898e745c4aa8245b05e25d73fa975 (diff) | |
parent | 7b255436df0543856faaae4704034fe83bc20717 (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (35 commits)
siimage: coding style cleanup (take 2)
ide-cd: clean up cdrom_analyze_sense_data()
ide-cd: fix test unsigned var < 0
ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]
piix: add Asus Eee 701 controller to short cable list
ARM: always select HAVE_IDE
remove the broken ETRAX_IDE driver
ide: remove ->dma_prdtable field from ide_hwif_t
ide: remove ->dma_vendor{1,3} fields from ide_hwif_t
scc_pata: add ->dma_host_set and ->dma_start methods
ide: skip "VLB sync" if host uses MMIO
ide: add ide_pad_transfer() helper
ide: remove ->INW and ->OUTW methods
ide: use IDE I/O helpers directly in ide_tf_{load,read}()
ns87415: add ->tf_read method
scc_pata: add ->tf_{load,read} methods
ide-h8300: add ->tf_{load,read} methods
ide-cris: add ->tf_{load,read} methods
ide: add ->tf_load and ->tf_read methods
ide: move ide_tf_{load,read} to ide-iops.c
...
Diffstat (limited to 'drivers/ide')
29 files changed, 927 insertions, 1753 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 3f9e10001e1..f702f9152ce 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -862,40 +862,6 @@ config BLK_DEV_IDE_BAST Say Y here if you want to support the onboard IDE channels on the Simtec BAST or the Thorcom VR1000 -config ETRAX_IDE - tristate "ETRAX IDE support" - depends on CRIS && BROKEN - select BLK_DEV_IDEDMA - help - Enables the ETRAX IDE driver. - - You can't use parallel ports or SCSI ports at the same time. - -config ETRAX_IDE_DELAY - int "Delay for drives to regain consciousness" - depends on ETRAX_IDE && ETRAX_ARCH_V10 - default 15 - help - Number of seconds to wait for IDE drives to spin up after an IDE - reset. - -choice - prompt "IDE reset pin" - depends on ETRAX_IDE && ETRAX_ARCH_V10 - default ETRAX_IDE_PB7_RESET - -config ETRAX_IDE_PB7_RESET - bool "Port_PB_Bit_7" - help - IDE reset on pin 7 on port B - -config ETRAX_IDE_G27_RESET - bool "Port_G_Bit_27" - help - IDE reset on pin 27 on port G - -endchoice - config IDE_H8300 tristate "H8300 IDE support" depends on H8300 diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 571544c37bb..f94b679b611 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -35,7 +35,7 @@ ifeq ($(CONFIG_BLK_DEV_CMD640), y) obj-y += cmd640-core.o endif -obj-$(CONFIG_BLK_DEV_IDE) += cris/ ppc/ +obj-$(CONFIG_BLK_DEV_IDE) += ppc/ obj-$(CONFIG_IDE_H8300) += h8300/ obj-$(CONFIG_IDE_GENERIC) += ide-generic.o obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index 65038ca35e1..061456914ca 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -483,7 +483,7 @@ static const struct ide_port_info icside_v6_port_info __initdata = { .init_dma = icside_dma_off_init, .port_ops = &icside_v6_no_dma_port_ops, .dma_ops = &icside_v6_dma_ops, - .host_flags = IDE_HFLAG_SERIALIZE, + .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO, .mwdma_mask = ATA_MWDMA2, .swdma_mask = ATA_SWDMA2, }; diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index aaf32541622..96378ebfb31 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -342,6 +342,7 @@ static const struct ide_port_ops palm_bk3710_ports_ops = { static const struct ide_port_info __devinitdata palm_bk3710_port_info = { .init_dma = palm_bk3710_init_dma, .port_ops = &palm_bk3710_ports_ops, + .host_flags = IDE_HFLAG_MMIO, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA4, /* (input clk 99MHz) */ .mwdma_mask = ATA_MWDMA2, diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index babc1a5e128..1747b235877 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c @@ -53,6 +53,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) ide_init_port_hw(hwif, &hw); + hwif->host_flags = IDE_HFLAG_MMIO; default_hwif_mmiops(hwif); idx[0] = hwif->index; diff --git a/drivers/ide/cris/Makefile b/drivers/ide/cris/Makefile deleted file mode 100644 index 20b95960531..00000000000 --- a/drivers/ide/cris/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -EXTRA_CFLAGS += -Idrivers/ide - -obj-$(CONFIG_IDE_ETRAX) += ide-cris.o diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c deleted file mode 100644 index 9df26855bc0..00000000000 --- a/drivers/ide/cris/ide-cris.c +++ /dev/null @@ -1,1086 +0,0 @@ -/* - * Etrax specific IDE functions, like init and PIO-mode setting etc. - * Almost the entire ide.c is used for the rest of the Etrax ATA driver. - * Copyright (c) 2000-2005 Axis Communications AB - * - * Authors: Bjorn Wesen (initial version) - * Mikael Starvik (crisv32 port) - */ - -/* Regarding DMA: - * - * There are two forms of DMA - "DMA handshaking" between the interface and the drive, - * and DMA between the memory and the interface. We can ALWAYS use the latter, since it's - * something built-in in the Etrax. However only some drives support the DMA-mode handshaking - * on the ATA-bus. The normal PC driver and Triton interface disables memory-if DMA when the - * device can't do DMA handshaking for some stupid reason. We don't need to do that. - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/blkdev.h> -#include <linux/hdreg.h> -#include <linux/ide.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <asm/dma.h> - -/* number of DMA descriptors */ -#define MAX_DMA_DESCRS 64 - -/* number of times to retry busy-flags when reading/writing IDE-registers - * this can't be too high because a hung harddisk might cause the watchdog - * to trigger (sometimes INB and OUTB are called with irq's disabled) - */ - -#define IDE_REGISTER_TIMEOUT 300 - -#define LOWDB(x) -#define D(x) - -enum /* Transfer types */ -{ - TYPE_PIO, - TYPE_DMA, - TYPE_UDMA -}; - -/* CRISv32 specifics */ -#ifdef CONFIG_ETRAX_ARCH_V32 -#include <asm/arch/hwregs/ata_defs.h> -#include <asm/arch/hwregs/dma_defs.h> -#include <asm/arch/hwregs/dma.h> -#include <asm/arch/pinmux.h> - -#define ATA_UDMA2_CYC 2 -#define ATA_UDMA2_DVS 3 -#define ATA_UDMA1_CYC 2 -#define ATA_UDMA1_DVS 4 -#define ATA_UDMA0_CYC 4 -#define ATA_UDMA0_DVS 6 -#define ATA_DMA2_STROBE 7 -#define ATA_DMA2_HOLD 1 -#define ATA_DMA1_STROBE 8 -#define ATA_DMA1_HOLD 3 -#define ATA_DMA0_STROBE 25 -#define ATA_DMA0_HOLD 19 -#define ATA_PIO4_SETUP 3 -#define ATA_PIO4_STROBE 7 -#define ATA_PIO4_HOLD 1 -#define ATA_PIO3_SETUP 3 -#define ATA_PIO3_STROBE 9 -#define ATA_PIO3_HOLD 3 -#define ATA_PIO2_SETUP 3 -#define ATA_PIO2_STROBE 13 -#define ATA_PIO2_HOLD 5 -#define ATA_PIO1_SETUP 5 -#define ATA_PIO1_STROBE 23 -#define ATA_PIO1_HOLD 9 -#define ATA_PIO0_SETUP 9 -#define ATA_PIO0_STROBE 39 -#define ATA_PIO0_HOLD 9 - -int -cris_ide_ack_intr(ide_hwif_t* hwif) -{ - reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, - hwif->io_ports.data_addr); - REG_WR_INT(ata, regi_ata, rw_ack_intr, 1 << ctrl2.sel); - return 1; -} - -static inline int -cris_ide_busy(void) -{ - reg_ata_rs_stat_data stat_data; - stat_data = REG_RD(ata, regi_ata, rs_stat_data); - return stat_data.busy; -} - -static inline int -cris_ide_ready(void) -{ - return !cris_ide_busy(); -} - -static inline int -cris_ide_data_available(unsigned short* data) -{ - reg_ata_rs_stat_data stat_data; - stat_data = REG_RD(ata, regi_ata, rs_stat_data); - *data = stat_data.data; - return stat_data.dav; -} - -static void -cris_ide_write_command(unsigned long command) -{ - REG_WR_INT(ata, regi_ata, rw_ctrl2, command); /* write data to the drive's register */ -} - -static void -cris_ide_set_speed(int type, int setup, int strobe, int hold) -{ - reg_ata_rw_ctrl0 ctrl0 = REG_RD(ata, regi_ata, rw_ctrl0); - reg_ata_rw_ctrl1 ctrl1 = REG_RD(ata, regi_ata, rw_ctrl1); - - if (type == TYPE_PIO) { - ctrl0.pio_setup = setup; - ctrl0.pio_strb = strobe; - ctrl0.pio_hold = hold; - } else if (type == TYPE_DMA) { - ctrl0.dma_strb = strobe; - ctrl0.dma_hold = hold; - } else if (type == TYPE_UDMA) { - ctrl1.udma_tcyc = setup; - ctrl1.udma_tdvs = strobe; - } - REG_WR(ata, regi_ata, rw_ctrl0, ctrl0); - REG_WR(ata, regi_ata, rw_ctrl1, ctrl1); -} - -static unsigned long -cris_ide_base_address(int bus) -{ - reg_ata_rw_ctrl2 ctrl2 = {0}; - ctrl2.sel = bus; - return REG_TYPE_CONV(int, reg_ata_rw_ctrl2, ctrl2); -} - -static unsigned long -cris_ide_reg_addr(unsigned long addr, int cs0, int cs1) -{ - reg_ata_rw_ctrl2 ctrl2 = {0}; - ctrl2.addr = addr; - ctrl2.cs1 = cs1; - ctrl2.cs0 = cs0; - return REG_TYPE_CONV(int, reg_ata_rw_ctrl2, ctrl2); -} - -static __init void -cris_ide_reset(unsigned val) -{ - reg_ata_rw_ctrl0 ctrl0 = {0}; - ctrl0.rst = val ? regk_ata_active : regk_ata_inactive; - REG_WR(ata, regi_ata, rw_ctrl0, ctrl0); -} - -static __init void -cris_ide_init(void) -{ - reg_ata_rw_ctrl0 ctrl0 = {0}; - reg_ata_rw_intr_mask intr_mask = {0}; - - ctrl0.en = regk_ata_yes; - REG_WR(ata, regi_ata, rw_ctrl0, ctrl0); - - intr_mask.bus0 = regk_ata_yes; - intr_mask.bus1 = regk_ata_yes; - intr_mask.bus2 = regk_ata_yes; - intr_mask.bus3 = regk_ata_yes; - - REG_WR(ata, regi_ata, rw_intr_mask, intr_mask); - - crisv32_request_dma(2, "ETRAX FS built-in ATA", DMA_VERBOSE_ON_ERROR, 0, dma_ata); - crisv32_request_dma(3, "ETRAX FS built-in ATA", DMA_VERBOSE_ON_ERROR, 0, dma_ata); - - crisv32_pinmux_alloc_fixed(pinmux_ata); - crisv32_pinmux_alloc_fixed(pinmux_ata0); - crisv32_pinmux_alloc_fixed(pinmux_ata1); - crisv32_pinmux_alloc_fixed(pinmux_ata2); - crisv32_pinmux_alloc_fixed(pinmux_ata3); - - DMA_RESET(regi_dma2); - DMA_ENABLE(regi_dma2); - DMA_RESET(regi_dma3); - DMA_ENABLE(regi_dma3); - - DMA_WR_CMD (regi_dma2, regk_dma_set_w_size2); - DMA_WR_CMD (regi_dma3, regk_dma_set_w_size2); -} - -static dma_descr_context mycontext __attribute__ ((__aligned__(32))); - -#define cris_dma_descr_type dma_descr_data -#define cris_pio_read regk_ata_rd -#define cris_ultra_mask 0x7 -#define MAX_DESCR_SIZE 0xffffffffUL - -static unsigned long -cris_ide_get_reg(unsigned long reg) -{ - return (reg & 0x0e000000) >> 25; -} - -static void -cris_ide_fill_descriptor(cris_dma_descr_type *d, void* buf, unsigned int len, int last) -{ - d->buf = (char*)virt_to_phys(buf); - d->after = d->buf + len; - d->eol = last; -} - -static void -cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int dir,int type,int len) -{ - ide_hwif_t *hwif = drive->hwif; - - reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, - hwif->io_ports.data_addr); - reg_ata_rw_trf_cnt trf_cnt = {0}; - - mycontext.saved_data = (dma_descr_data*)virt_to_phys(d); - mycontext.saved_data_buf = d->buf; - /* start the dma channel */ - DMA_START_CONTEXT(dir ? regi_dma3 : regi_dma2, virt_to_phys(&mycontext)); - - /* initiate a multi word dma read using PIO handshaking */ - trf_cnt.cnt = len >> 1; - /* Due to a "feature" the transfer count has to be one extra word for UDMA. */ - if (type == TYPE_UDMA) - trf_cnt.cnt++; - REG_WR(ata, regi_ata, rw_trf_cnt, trf_cnt); - - ctrl2.rw = dir ? regk_ata_rd : regk_ata_wr; - ctrl2.trf_mode = regk_ata_dma; - ctrl2.hsh = type == TYPE_PIO ? regk_ata_pio : - type == TYPE_DMA ? regk_ata_dma : regk_ata_udma; - ctrl2.multi = regk_ata_yes; - ctrl2.dma_size = regk_ata_word; - REG_WR(ata, regi_ata, rw_ctrl2, ctrl2); -} - -static void -cris_ide_wait_dma(int dir) -{ - reg_dma_rw_stat status; - do - { - status = REG_RD(dma, dir ? regi_dma3 : regi_dma2, rw_stat); - } while(status.list_state != regk_dma_data_at_eol); -} - -static int cris_dma_test_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - int intr = REG_RD_INT(ata, regi_ata, r_intr); - - reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, - hwif->io_ports.data_addr); - - return intr & (1 << ctrl2.sel) ? 1 : 0; -} - -static void cris_ide_initialize_dma(int dir) -{ -} - -#else -/* CRISv10 specifics */ -#include <asm/arch/svinto.h> -#include <asm/arch/io_interface_mux.h> - -/* PIO timing (in R_ATA_CONFIG) - * - * _____________________________ - * ADDRESS : ________/ - * - * _______________ - * DIOR : ____________/ \__________ - * - * _______________ - * DATA : XXXXXXXXXXXXXXXX_______________XXXXXXXX - * - * - * DIOR is unbuffered while address and data is buffered. - * This creates two problems: - * 1. The DIOR pulse is to early (because it is unbuffered) - * 2. The rise time of DIOR is long - * - * There are at least three different plausible solutions - * 1. Use a pad capable of larger currents in Etrax - * 2. Use an external buffer - * 3. Make the strobe pulse longer - * - * Some of the strobe timings below are modified to compensate - * for this. This implies a slight performance decrease. - * - * THIS SHOULD NEVER BE CHANGED! - * - * TODO: Is this true for the latest LX boards still ? - */ - -#define ATA_UDMA2_CYC 0 /* No UDMA supported, just to make it compile. */ -#define ATA_UDMA2_DVS 0 -#define ATA_UDMA1_CYC 0 -#define ATA_UDMA1_DVS 0 -#define ATA_UDMA0_CYC 0 -#define ATA_UDMA0_DVS 0 -#define ATA_DMA2_STROBE 4 -#define ATA_DMA2_HOLD 0 -#define ATA_DMA1_STROBE 4 -#define ATA_DMA1_HOLD 1 -#define ATA_DMA0_STROBE 12 -#define ATA_DMA0_HOLD 9 -#define ATA_PIO4_SETUP 1 -#define ATA_PIO4_STROBE 5 -#define ATA_PIO4_HOLD 0 -#define ATA_PIO3_SETUP 1 -#define ATA_PIO3_STROBE 5 -#define ATA_PIO3_HOLD 1 -#define ATA_PIO2_SETUP 1 -#define ATA_PIO2_STROBE 6 -#define ATA_PIO2_HOLD 2 -#define ATA_PIO1_SETUP 2 -#define ATA_PIO1_STROBE 11 -#define ATA_PIO1_HOLD 4 -#define ATA_PIO0_SETUP 4 -#define ATA_PIO0_STROBE 19 -#define ATA_PIO0_HOLD 4 - -int -cris_ide_ack_intr(ide_hwif_t* hwif) -{ - return 1; -} - -static inline int -cris_ide_busy(void) -{ - return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy) ; -} - -static inline int -cris_ide_ready(void) -{ - return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, tr_rdy) ; -} - -static inline int -cris_ide_data_available(unsigned short* data) -{ - unsigned long status = *R_ATA_STATUS_DATA; - *data = (unsigned short)status; - return status & IO_MASK(R_ATA_STATUS_DATA, dav); -} - -static void -cris_ide_write_command(unsigned long command) -{ - *R_ATA_CTRL_DATA = command; -} - -static void -cris_ide_set_speed(int type, int setup, int strobe, int hold) -{ - static int pio_setup = ATA_PIO4_SETUP; - static int pio_strobe = ATA_PIO4_STROBE; - static int pio_hold = ATA_PIO4_HOLD; - static int dma_strobe = ATA_DMA2_STROBE; - static int dma_hold = ATA_DMA2_HOLD; - - if (type == TYPE_PIO) { - pio_setup = setup; - pio_strobe = strobe; - pio_hold = hold; - } else if (type == TYPE_DMA) { - dma_strobe = strobe; - dma_hold = hold; - } - *R_ATA_CONFIG = ( IO_FIELD( R_ATA_CONFIG, enable, 1 ) | - IO_FIELD( R_ATA_CONFIG, dma_strobe, dma_strobe ) | - IO_FIELD( R_ATA_CONFIG, dma_hold, dma_hold ) | - IO_FIELD( R_ATA_CONFIG, pio_setup, pio_setup ) | - IO_FIELD( R_ATA_CONFIG, pio_strobe, pio_strobe ) | - IO_FIELD( R_ATA_CONFIG, pio_hold, pio_hold ) ); -} - -static unsigned long -cris_ide_base_address(int bus) -{ - return IO_FIELD(R_ATA_CTRL_DATA, sel, bus); -} - -static unsigned long -cris_ide_reg_addr(unsigned long addr, int cs0, int cs1) -{ - return IO_FIELD(R_ATA_CTRL_DATA, addr, addr) | - IO_FIELD(R_ATA_CTRL_DATA, cs0, cs0) | - IO_FIELD(R_ATA_CTRL_DATA, cs1, cs1); -} - -static __init void -cris_ide_reset(unsigned val) -{ -#ifdef CONFIG_ETRAX_IDE_G27_RESET - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, 27, val); -#endif -#ifdef CONFIG_ETRAX_IDE_PB7_RESET - port_pb_dir_shadow = port_pb_dir_shadow | - IO_STATE(R_PORT_PB_DIR, dir7, output); - *R_PORT_PB_DIR = port_pb_dir_shadow; - REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, 7, val); -#endif -} - -static __init void -cris_ide_init(void) -{ - volatile unsigned int dummy; - - *R_ATA_CTRL_DATA = 0; - *R_ATA_TRANSFER_CNT = 0; - *R_ATA_CONFIG = 0; - - if (cris_request_io_interface(if_ata, "ETRAX100LX IDE")) { - printk(KERN_CRIT "ide: Failed to get IO interface\n"); - return; - } else if (cris_request_dma(ATA_TX_DMA_NBR, - "ETRAX100LX IDE TX", - DMA_VERBOSE_ON_ERROR, - dma_ata)) { - cris_free_io_interface(if_ata); - printk(KERN_CRIT "ide: Failed to get Tx DMA channel\n"); - return; - } else if (cris_request_dma(ATA_RX_DMA_NBR, - "ETRAX100LX IDE RX", - DMA_VERBOSE_ON_ERROR, - dma_ata)) { - cris_free_dma(ATA_TX_DMA_NBR, "ETRAX100LX IDE Tx"); - cris_free_io_interface(if_ata); - printk(KERN_CRIT "ide: Failed to get Rx DMA channel\n"); - return; - } - - /* make a dummy read to set the ata controller in a proper state */ - dummy = *R_ATA_STATUS_DATA; - - *R_ATA_CONFIG = ( IO_FIELD( R_ATA_CONFIG, enable, 1 )); - *R_ATA_CTRL_DATA = ( IO_STATE( R_ATA_CTRL_DATA, rw, read) | - IO_FIELD( R_ATA_CTRL_DATA, addr, 1 ) ); - - while(*R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy)); /* wait for busy flag*/ - - *R_IRQ_MASK0_SET = ( IO_STATE( R_IRQ_MASK0_SET, ata_irq0, set ) | - IO_STATE( R_IRQ_MASK0_SET, ata_irq1, set ) | - IO_STATE( R_IRQ_MASK0_SET, ata_irq2, set ) | - IO_STATE( R_IRQ_MASK0_SET, ata_irq3, set ) ); - - /* reset the dma channels we will use */ - - RESET_DMA(ATA_TX_DMA_NBR); - RESET_DMA(ATA_RX_DMA_NBR); - WAIT_DMA(ATA_TX_DMA_NBR); - WAIT_DMA(ATA_RX_DMA_NBR); -} - -#define cris_dma_descr_type etrax_dma_descr -#define cris_pio_read IO_STATE(R_ATA_CTRL_DATA, rw, read) -#define cris_ultra_mask 0x0 -#define MAX_DESCR_SIZE 0x10000UL - -static unsigned long -cris_ide_get_reg(unsigned long reg) -{ - return (reg & 0x0e000000) >> 25; -} - -static void -cris_ide_fill_descriptor(cris_dma_descr_type *d, void* buf, unsigned int len, int last) -{ - d->buf = virt_to_phys(buf); - d->sw_len = len == MAX_DESCR_SIZE ? 0 : len; - if (last) - d->ctrl |= d_eol; -} - -static void cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int dir, int type, int len) -{ - unsigned long cmd; - - if (dir) { - /* need to do this before RX DMA due to a chip bug - * it is enough to just flush the part of the cache that - * corresponds to the buffers we start, but since HD transfers - * usually are more than 8 kB, it is easier to optimize for the - * normal case and just flush the entire cache. its the only - * way to be sure! (OB movie quote) - */ - flush_etrax_cache(); - *R_DMA_CH3_FIRST = virt_to_phys(d); - *R_DMA_CH3_CMD = IO_STATE(R_DMA_CH3_CMD, cmd, start); - - } else { - *R_DMA_CH2_FIRST = virt_to_phys(d); - *R_DMA_CH2_CMD = IO_STATE(R_DMA_CH2_CMD, cmd, start); - } - - /* initiate a multi word dma read using DMA handshaking */ - - *R_ATA_TRANSFER_CNT = - IO_FIELD(R_ATA_TRANSFER_CNT, count, len >> 1); - - cmd = dir ? IO_STATE(R_ATA_CTRL_DATA, rw, read) : IO_STATE(R_ATA_CTRL_DATA, rw, write); - cmd |= type == TYPE_PIO ? IO_STATE(R_ATA_CTRL_DATA, handsh, pio) : - IO_STATE(R_ATA_CTRL_DATA, handsh, dma); - *R_ATA_CTRL_DATA = - cmd | - IO_FIELD(R_ATA_CTRL_DATA, data, - drive->hwif->io_ports.data_addr) | - IO_STATE(R_ATA_CTRL_DATA, src_dst, dma) | - IO_STATE(R_ATA_CTRL_DATA, multi, on) | - IO_STATE(R_ATA_CTRL_DATA, dma_size, word); -} - -static void -cris_ide_wait_dma(int dir) -{ - if (dir) - WAIT_DMA(ATA_RX_DMA_NBR); - else - WAIT_DMA(ATA_TX_DMA_NBR); -} - -static int cris_dma_test_irq(ide_drive_t *drive) -{ - int intr = *R_IRQ_MASK0_RD; - int bus = IO_EXTRACT(R_ATA_CTRL_DATA, sel, - drive->hwif->io_ports.data_addr); - - return intr & (1 << (bus + IO_BITNR(R_IRQ_MASK0_RD, ata_irq0))) ? 1 : 0; -} - - -static void cris_ide_initialize_dma(int dir) -{ - if (dir) - { - RESET_DMA(ATA_RX_DMA_NBR); /* sometimes the DMA channel get stuck so we need to do this */ - WAIT_DMA(ATA_RX_DMA_NBR); - } - else - { - RESET_DMA(ATA_TX_DMA_NBR); /* sometimes the DMA channel get stuck so we need to do this */ - WAIT_DMA(ATA_TX_DMA_NBR); - } -} - -#endif - -void -cris_ide_outw(unsigned short data, unsigned long reg) { - int timeleft; - - LOWDB(printk("ow: data 0x%x, reg 0x%x\n", data, reg)); - - /* note the lack of handling any timeouts. we stop waiting, but we don't - * really notify anybody. - */ - - timeleft = IDE_REGISTER_TIMEOUT; - /* wait for busy flag */ - do { - timeleft--; - } while(timeleft && cris_ide_busy()); - - /* - * Fall through at a timeout, so the ongoing command will be - * aborted by the write below, which is expected to be a dummy - * command to the command register. This happens when a faulty - * drive times out on a command. See comment on timeout in - * INB. - */ - if(!timeleft) - printk("ATA timeout reg 0x%lx := 0x%x\n", reg, data); - - cris_ide_write_command(reg|data); /* write data to the drive's register */ - - timeleft = IDE_REGISTER_TIMEOUT; - /* wait for transmitter ready */ - do { - timeleft--; - } while(timeleft && !cris_ide_ready()); -} - -void -cris_ide_outb(unsigned char data, unsigned long reg) -{ - cris_ide_outw(data, reg); -} - -void -cris_ide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port) -{ - cris_ide_outw(addr, port); -} - -unsigned short -cris_ide_inw(unsigned long reg) { - int timeleft; - unsigned short val; - - timeleft = IDE_REGISTER_TIMEOUT; - /* wait for busy flag */ - do { - timeleft--; - } while(timeleft && cris_ide_busy()); - - if(!timeleft) { - /* - * If we're asked to read the status register, like for - * example when a command does not complete for an - * extended time, but the ATA interface is stuck in a - * busy state at the *ETRAX* ATA interface level (as has - * happened repeatedly with at least one bad disk), then - * the best thing to do is to pretend that we read - * "busy" in the status register, so the IDE driver will - * time-out, abort the ongoing command and perform a - * reset sequence. Note that the subsequent OUT_BYTE - * call will also timeout on busy, but as long as the - * write is still performed, everything will be fine. - */ - if (cris_ide_get_reg(reg) == 7) - return BUSY_STAT; - else - /* For other rare cases we assume 0 is good enough. */ - return 0; - } - - cris_ide_write_command(reg | cris_pio_read); - - timeleft = IDE_REGISTER_TIMEOUT; - /* wait for available */ - do { - timeleft--; - } while(timeleft && !cris_ide_data_available(&val)); - - if(!timeleft) - return 0; - - LOWDB(printk("inb: 0x%x from reg 0x%x\n", val & 0xff, reg)); - - return val; -} - -unsigned char -cris_ide_inb(unsigned long reg) -{ - return (unsigned char)cris_ide_inw(reg); -} - -static void cris_ide_input_data (ide_drive_t *drive, void *, unsigned int); -static void cris_ide_output_data (ide_drive_t *drive, void *, unsigned int); -static void cris_atapi_input_bytes(ide_drive_t *drive, void *, unsigned int); -static void cris_atapi_output_bytes(ide_drive_t *drive, void *, unsigned int); - -static void cris_dma_host_set(ide_drive_t *drive, int on) -{ -} - -static void cris_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - int setup, strobe, hold; - - switch(pio) - { - case 0: - setup = ATA_PIO0_SETUP; - strobe = ATA_PIO0_STROBE; - hold = ATA_PIO0_HOLD; - break; - case 1: - setup = ATA_PIO1_SETUP; - strobe = ATA_PIO1_STROBE; - hold = ATA_PIO1_HOLD; - break; - case 2: - setup = ATA_PIO2_SETUP; - strobe = ATA_PIO2_STROBE; - hold = ATA_PIO2_HOLD; - break; - case 3: - setup = ATA_PIO3_SETUP; - strobe = ATA_PIO3_STROBE; - hold = ATA_PIO3_HOLD; - break; - case 4: - setup = ATA_PIO4_SETUP; - strobe = ATA_PIO4_STROBE; - hold = ATA_PIO4_HOLD; - break; - default: - return; - } - - cris_ide_set_speed(TYPE_PIO, setup, strobe, hold); -} - -static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - int cyc = 0, dvs = 0, strobe = 0, hold = 0; - - switch(speed) - { - case XFER_UDMA_0: - cyc = ATA_UDMA0_CYC; - dvs = ATA_UDMA0_DVS; - break; - case XFER_UDMA_1: - cyc = ATA_UDMA1_CYC; - dvs = ATA_UDMA1_DVS; - break; - case XFER_UDMA_2: - cyc = ATA_UDMA2_CYC; - dvs = ATA_UDMA2_DVS; - break; - case XFER_MW_DMA_0: - strobe = ATA_DMA0_STROBE; - hold = ATA_DMA0_HOLD; - break; - case XFER_MW_DMA_1: - strobe = ATA_DMA1_STROBE; - hold = ATA_DMA1_HOLD; - break; - case XFER_MW_DMA_2: - strobe = ATA_DMA2_STROBE; - hold = ATA_DMA2_HOLD; - break; - } - - if (speed >= XFER_UDMA_0) - cris_ide_set_speed(TYPE_UDMA, cyc, dvs, 0); - else - cris_ide_set_speed(TYPE_DMA, 0, strobe, hold); -} - -static void __init cris_setup_ports(hw_regs_t *hw, unsigned long base) -{ - int i; - - memset(hw, 0, sizeof(*hw)); - - for (i = 0; i <= 7; i++) - hw->io_ports_array[i] = base + cris_ide_reg_addr(i, 0, 1); - - /* - * the IDE control register is at ATA address 6, - * with CS1 active instead of CS0 - */ - hw->io_ports.ctl_addr = base + cris_ide_reg_addr(6, 1, 0); - - hw->irq = ide_default_irq(0); - hw->ack_intr = cris_ide_ack_intr; -} - -static const struct ide_port_ops cris_port_ops = { - .set_pio_mode = cris_set_pio_mode, - .set_dma_mode = cris_set_dma_mode, -}; - -static const struct ide_dma_ops cris_dma_ops; - -static const struct ide_port_info cris_port_info __initdata = { - .chipset = ide_etrax100, - .port_ops = &cris_port_ops, - .dma_ops = &cris_dma_ops, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_NO_DMA, /* no SFF-style DMA */ - .pio_mask = ATA_PIO4, - .udma_mask = cris_ultra_mask, - .mwdma_mask = ATA_MWDMA2, -}; - -static int __init init_e100_ide(void) -{ - hw_regs_t hw; - int h; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - - printk("ide: ETRAX FS built-in ATA DMA controller\n"); - - for (h = 0; h < 4; h++) { - ide_hwif_t *hwif = NULL; - - cris_setup_ports(&hw, cris_ide_base_address(h)); - - hwif = ide_find_port(); - if (hwif == NULL) - continue; - ide_init_port_data(hwif, hwif->index); - ide_init_port_hw(hwif, &hw); - - hwif->ata_input_data = &cris_ide_input_data; - hwif->ata_output_data = &cris_ide_output_data; - hwif->atapi_input_bytes = &cris_atapi_input_bytes; - hwif->atapi_output_bytes = &cris_atapi_output_bytes; - hwif->OUTB = &cris_ide_outb; - hwif->OUTW = &cris_ide_outw; - hwif->OUTBSYNC = &cris_ide_outbsync; - hwif->INB = &cris_ide_inb; - hwif->INW = &cris_ide_inw; - hwif->cbl = ATA_CBL_PATA40; - - idx[h] = hwif->index; - } - - /* Reset pulse */ - cris_ide_reset(0); - udelay(25); - cris_ide_reset(1); - - cris_ide_init(); - - cris_ide_set_speed(TYPE_PIO, ATA_PIO4_SETUP, ATA_PIO4_STROBE, ATA_PIO4_HOLD); - cris_ide_set_speed(TYPE_DMA, 0, ATA_DMA2_STROBE, ATA_DMA2_HOLD); - cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0); - - ide_device_add(idx, &cris_port_info); - - return 0; -} - -static cris_dma_descr_type mydescr __attribute__ ((__aligned__(16))); - -/* - * The following routines are mainly used by the ATAPI drivers. - * - * These routines will round up any request for an odd number of bytes, - * so if an odd bytecount is specified, be sure that there's at least one - * extra byte allocated for the buffer. - */ -static void -cris_atapi_input_bytes (ide_drive_t *drive, void *buffer, unsigned int bytecount) -{ - D(printk("atapi_input_bytes, buffer 0x%x, count %d\n", - buffer, bytecount)); - - if(bytecount & 1) { - printk("warning, odd bytecount in cdrom_in_bytes = %d.\n", bytecount); - bytecount++; /* to round off */ - } - - /* setup DMA and start transfer */ - - cris_ide_fill_descriptor(&mydescr, buffer, bytecount, 1); - cris_ide_start_dma(drive, &mydescr, 1, TYPE_PIO, bytecount); - - /* wait for completion */ - LED_DISK_READ(1); - cris_ide_wait_dma(1); - LED_DISK_READ(0); -} - -static void -cris_atapi_output_bytes (ide_drive_t *drive, void *buffer, unsigned int bytecount) -{ - D(printk("atapi_output_bytes, buffer 0x%x, count %d\n", - buffer, bytecount)); - - if(bytecount & 1) { - printk("odd bytecount %d in atapi_out_bytes!\n", bytecount); - bytecount++; - } - - cris_ide_fill_descriptor(&mydescr, buffer, bytecount, 1); - cris_ide_start_dma(drive, &mydescr, 0, TYPE_PIO, bytecount); - - /* wait for completion */ - - LED_DISK_WRITE(1); - LED_DISK_READ(1); - cris_ide_wait_dma(0); - LED_DISK_WRITE(0); -} - -/* - * This is used for most PIO data transfers *from* the IDE interface - */ -static void -cris_ide_input_data (ide_drive_t *drive, void *buffer, unsigned int wcount) -{ - cris_atapi_input_bytes(drive, buffer, wcount << 2); -} - -/* - * This is used for most PIO data transfers *to* the IDE interface - */ -static void -cris_ide_output_data (ide_drive_t *drive, void *buffer, unsigned int wcount) -{ - cris_atapi_output_bytes(drive, buffer, wcount << 2); -} - -/* we only have one DMA channel on the chip for ATA, so we can keep these statically */ -static cris_dma_descr_type ata_descrs[MAX_DMA_DESCRS] __attribute__ ((__aligned__(16))); -static unsigned int ata_tot_size; - -/* - * cris_ide_build_dmatable() prepares a dma request. - * Returns 0 if all went okay, returns 1 otherwise. - */ -static int cris_ide_build_dmatable (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - struct scatterlist* sg; - struct request *rq = drive->hwif->hwgroup->rq; - unsigned long size, addr; - unsigned int count = 0; - int i = 0; - - sg = hwif->sg_table; - - ata_tot_size = 0; - - ide_map_sg(drive, rq); - i = hwif->sg_nents; - - while(i) { - /* - * Determine addr and size of next buffer area. We assume that - * individual virtual buffers are always composed linearly in - * physical memory. For example, we assume that any 8kB buffer - * is always composed of two adjacent physical 4kB pages rather - * than two possibly non-adjacent physical 4kB pages. - */ - /* group sequential buffers into one large buffer */ - addr = sg_phys(sg); - size = sg_dma_len(sg); - while (--i) { - sg = sg_next(sg); - if ((addr + size) != sg_phys(sg)) - break; - size += sg_dma_len(sg); - } - - /* did we run out of descriptors? */ - - if(count >= MAX_DMA_DESCRS) { - printk("%s: too few DMA descriptors\n", drive->name); - return 1; - } - - /* however, this case is more difficult - rw_trf_cnt cannot be more - than 65536 words per transfer, so in that case we need to either - 1) use a DMA interrupt to re-trigger rw_trf_cnt and continue with - the descriptors, or - 2) simply do the request here, and get dma_intr to only ide_end_request on - those blocks that were actually set-up for transfer. - */ - - if(ata_tot_size + size > 131072) { - printk("too large total ATA DMA request, %d + %d!\n", ata_tot_size, (int)size); - return 1; - } - - /* If size > MAX_DESCR_SIZE it has to be splitted into new descriptors. Since we - don't handle size > 131072 only one split is necessary */ - - if(size > MAX_DESCR_SIZE) { - cris_ide_fill_descriptor(&ata_descrs[count], (void*)addr, MAX_DESCR_SIZE, 0); - count++; - ata_tot_size += MAX_DESCR_SIZE; - size -= MAX_DESCR_SIZE; - addr += MAX_DESCR_SIZE; - } - - cris_ide_fill_descriptor(&ata_descrs[count], (void*)addr, size,i ? 0 : 1); - count++; - ata_tot_size += size; - } - - if (count) { - /* return and say all is ok */ - return 0; - } - - printk("%s: empty DMA table?\n", drive->name); - return 1; /* let the PIO routines handle this weirdness */ -} - -/* - * cris_dma_intr() is the handler for disk read/write DMA interrupts - */ -static ide_startstop_t cris_dma_intr (ide_drive_t *drive) -{ - LED_DISK_READ(0); - LED_DISK_WRITE(0); - - return ide_dma_intr(drive); -} - -/* - * Functions below initiates/aborts DMA read/write operations on a drive. - * - * The caller is assumed to have selected the drive and programmed the drive's - * sector address using CHS or LBA. All that remains is to prepare for DMA - * and then issue the actual read/write DMA/PIO command to the drive. - * - * For ATAPI devices, we just prepare for DMA and return. The caller should - * then issue the packet command to the drive and call us again with - * cris_dma_start afterwards. - * - * Returns 0 if all went well. - * Returns 1 if DMA read/write could not be started, in which case - * the caller should revert to PIO for the current request. - */ - -static int cris_dma_end(ide_drive_t *drive) -{ - drive->waiting_for_dma = 0; - return 0; -} - -static int cris_dma_setup(ide_drive_t *drive) -{ - struct request *rq = drive->hwif->hwgroup->rq; - - cris_ide_initialize_dma(!rq_data_dir(rq)); - if (cris_ide_build_dmatable (drive)) { - ide_map_sg(drive, rq); - return 1; - } - - drive->waiting_for_dma = 1; - return 0; -} - -static void cris_dma_exec_cmd(ide_drive_t *drive, u8 command) -{ - ide_execute_command(drive, command, &cris_dma_intr, WAIT_CMD, NULL); -} - -static void cris_dma_start(ide_drive_t *drive) -{ - struct request *rq = drive->hwif->hwgroup->rq; - int writing = rq_data_dir(rq); - int type = TYPE_DMA; - - if (drive->current_speed >= XFER_UDMA_0) - type = TYPE_UDMA; - - cris_ide_start_dma(drive, &ata_descrs[0], writing ? 0 : 1, type, ata_tot_size); - - if (writing) { - LED_DISK_WRITE(1); - } else { - LED_DISK_READ(1); - } -} - -static const struct ide_dma_ops cris_dma_ops = { - .dma_host_set = cris_dma_host_set, - .dma_setup = cris_dma_setup, - .dma_exec_cmd = cris_dma_exec_cmd, - .dma_start = cris_dma_start, - .dma_end = cris_dma_end, - .dma_test_irq = cris_dma_test_irq, -}; - -module_init(init_e100_ide); - -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index fd23f12e17a..ecf53bb0d2a 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -42,6 +42,91 @@ static u16 mm_inw(unsigned long a) return r; } +static void h8300_tf_load(ide_drive_t *drive, ide_task_t *task) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + struct ide_taskfile *tf = &task->tf; + u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; + + if (task->tf_flags & IDE_TFLAG_FLAGGED) + HIHI = 0xFF; + + ide_set_irq(drive, 1); + + if (task->tf_flags & IDE_TFLAG_OUT_DATA) + mm_outw((tf->hob_data << 8) | tf->data, io_ports->data_addr); + + if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) + outb(tf->hob_feature, io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) + outb(tf->hob_nsect, io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) + outb(tf->hob_lbal, io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) + outb(tf->hob_lbam, io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) + outb(tf->hob_lbah, io_ports->lbah_addr); + + if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) + outb(tf->feature, io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_OUT_NSECT) + outb(tf->nsect, io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAL) + outb(tf->lbal, io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAM) + outb(tf->lbam, io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAH) + outb(tf->lbah, io_ports->lbah_addr); + + if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) + outb((tf->device & HIHI) | drive->select.all, + io_ports->device_addr); +} + +static void h8300_tf_read(ide_drive_t *drive, ide_task_t *task) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + struct ide_taskfile *tf = &task->tf; + + if (task->tf_flags & IDE_TFLAG_IN_DATA) { + u16 data = mm_inw(io_ports->data_addr); + + tf->data = data & 0xff; + tf->hob_data = (data >> 8) & 0xff; + } + + /* be sure we're looking at the low order bits */ + outb(drive->ctl & ~0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_NSECT) + tf->nsect = inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAL) + tf->lbal = inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAM) + tf->lbam = inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAH) + tf->lbah = inb(io_ports->lbah_addr); + if (task->tf_flags & IDE_TFLAG_IN_DEVICE) + tf->device = inb(io_ports->device_addr); + + if (task->tf_flags & IDE_TFLAG_LBA48) { + outb(drive->ctl | 0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) + tf->hob_feature = inb(io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) + tf->hob_nsect = inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) + tf->hob_lbal = inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) + tf->hob_lbam = inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) + tf->hob_lbah = inb(io_ports->lbah_addr); + } +} + static void mm_outsw(unsigned long addr, void *buf, u32 len) { unsigned short *bp = (unsigned short *)buf; @@ -56,6 +141,18 @@ static void mm_insw(unsigned long addr, void *buf, u32 len) *bp = bswap(*(volatile u16 *)addr); } +static void h8300_input_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) +{ + mm_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2); +} + +static void h8300_output_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) +{ + mm_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2); +} + #define H8300_IDE_GAP (2) static inline void hw_setup(hw_regs_t *hw) @@ -74,12 +171,11 @@ static inline void hwif_setup(ide_hwif_t *hwif) { default_hwif_iops(hwif); - hwif->OUTW = mm_outw; - hwif->OUTSW = mm_outsw; - hwif->INW = mm_inw; - hwif->INSW = mm_insw; - hwif->OUTSL = NULL; - hwif->INSL = NULL; + hwif->tf_load = h8300_tf_load; + hwif->tf_read = h8300_tf_read; + + hwif->input_data = h8300_input_data; + hwif->output_data = h8300_output_data; } static int __init h8300_ide_init(void) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index b34fd2bde96..fe9df38f62c 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -142,7 +142,6 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, { unsigned long sector; unsigned long bio_sectors; - unsigned long valid; struct cdrom_info *info = drive->driver_data; if (!cdrom_log_sense(drive, failed_command, sense)) @@ -173,17 +172,13 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, (sense->information[2] << 8) | (sense->information[3]); - bio_sectors = bio_sectors(failed_command->bio); - if (bio_sectors < 4) - bio_sectors = 4; if (drive->queue->hardsect_size == 2048) /* device sector size is 2K */ sector <<= 2; + + bio_sectors = max(bio_sectors(failed_command->bio), 4U); sector &= ~(bio_sectors - 1); - valid = (sector - failed_command->sector) << 9; - if (valid < 0) - valid = 0; if (sector < get_capacity(info->disk) && drive->probed_capacity - sector < 4 * 75) set_capacity(info->disk, sector); @@ -555,14 +550,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, ATAPI_WAIT_PC, cdrom_timer_expiry); return ide_started; } else { - unsigned long flags; - - /* packet command */ - spin_lock_irqsave(&ide_lock, flags); - hwif->OUTBSYNC(drive, WIN_PACKETCMD, - hwif->io_ports.command_addr); - ndelay(400); - spin_unlock_irqrestore(&ide_lock, flags); + ide_execute_pkt_cmd(drive); return (*handler) (drive); } @@ -613,7 +601,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, cmd_len = ATAPI_MIN_CDB_BYTES; /* send the command to the device */ - HWIF(drive)->atapi_output_bytes(drive, rq->cmd, cmd_len); + hwif->output_data(drive, NULL, rq->cmd, cmd_len); /* start the DMA if need be */ if (info->dma) @@ -629,7 +617,7 @@ static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len) { while (len > 0) { int dum = 0; - xf(drive, &dum, sizeof(dum)); + xf(drive, NULL, &dum, sizeof(dum)); len -= sizeof(dum); } } @@ -639,7 +627,7 @@ static void ide_cd_drain_data(ide_drive_t *drive, int nsects) while (nsects > 0) { static char dum[SECTOR_SIZE]; - drive->hwif->atapi_input_bytes(drive, dum, sizeof(dum)); + drive->hwif->input_data(drive, NULL, dum, sizeof(dum)); nsects--; } } @@ -666,7 +654,7 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, printk(KERN_ERR "%s: %s: wrong transfer direction!\n", drive->name, __func__); - xf = rw ? hwif->atapi_output_bytes : hwif->atapi_input_bytes; + xf = rw ? hwif->output_data : hwif->input_data; ide_cd_pad_transfer(drive, xf, len); } else if (rw == 0 && ireason == 1) { /* @@ -1019,10 +1007,10 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (ireason == 0) { write = 1; - xferfunc = HWIF(drive)->atapi_output_bytes; + xferfunc = hwif->output_data; } else { write = 0; - xferfunc = HWIF(drive)->atapi_input_bytes; + xferfunc = hwif->input_data; } /* transfer data */ @@ -1061,7 +1049,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (blen > thislen) blen = thislen; - xferfunc(drive, ptr, blen); + xferfunc(drive, NULL, ptr, blen); thislen -= blen; len -= blen; diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index c352cf27b6e..653b1ade13d 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -464,9 +464,10 @@ int ide_dma_setup(ide_drive_t *drive) /* PRD table */ if (hwif->mmio) - writel(hwif->dmatable_dma, (void __iomem *)hwif->dma_prdtable); + writel(hwif->dmatable_dma, + (void __iomem *)(hwif->dma_base + ATA_DMA_TABLE_OFS)); else - outl(hwif->dmatable_dma, hwif->dma_prdtable); + outl(hwif->dmatable_dma, hwif->dma_base + ATA_DMA_TABLE_OFS); /* specify r/w */ hwif->OUTB(reading, hwif->dma_command); @@ -858,14 +859,8 @@ void ide_setup_dma(ide_hwif_t *hwif, unsigned long base) if (!hwif->dma_command) hwif->dma_command = hwif->dma_base + 0; - if (!hwif->dma_vendor1) - hwif->dma_vendor1 = hwif->dma_base + 1; if (!hwif->dma_status) hwif->dma_status = hwif->dma_base + 2; - if (!hwif->dma_vendor3) - hwif->dma_vendor3 = hwif->dma_base + 3; - if (!hwif->dma_prdtable) - hwif->dma_prdtable = hwif->dma_base + 4; hwif->dma_ops = &sff_dma_ops; } diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 489079b8ed0..f05fbc2bd7a 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -231,6 +231,7 @@ static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs) static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, unsigned int bcount, int direction) { + ide_hwif_t *hwif = drive->hwif; struct request *rq = pc->rq; struct req_iterator iter; struct bio_vec *bvec; @@ -246,9 +247,9 @@ static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, data = bvec_kmap_irq(bvec, &flags); if (direction) - drive->hwif->atapi_output_bytes(drive, data, count); + hwif->output_data(drive, NULL, data, count); else - drive->hwif->atapi_input_bytes(drive, data, count); + hwif->input_data(drive, NULL, data, count); bvec_kunmap_irq(data, &flags); bcount -= count; @@ -261,10 +262,7 @@ static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, if (bcount) { printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n", drive->name, __func__, bcount); - if (direction) - ide_atapi_write_zeros(drive, bcount); - else - ide_atapi_discard_data(drive, bcount); + ide_pad_transfer(drive, direction, bcount); } } @@ -490,7 +488,7 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) printk(KERN_ERR "ide-floppy: The floppy wants " "to send us more data than expected " "- discarding data\n"); - ide_atapi_discard_data(drive, bcount); + ide_pad_transfer(drive, 0, bcount); ide_set_handler(drive, &idefloppy_pc_intr, @@ -503,12 +501,12 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) } } if (pc->flags & PC_FLAG_WRITING) - xferfunc = hwif->atapi_output_bytes; + xferfunc = hwif->output_data; else - xferfunc = hwif->atapi_input_bytes; + xferfunc = hwif->input_data; if (pc->buf) - xferfunc(drive, pc->cur_pos, bcount); + xferfunc(drive, NULL, pc->cur_pos, bcount); else ide_floppy_io_buffers(drive, pc, bcount, !!(pc->flags & PC_FLAG_WRITING)); @@ -548,8 +546,10 @@ static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive) /* Set the interrupt routine */ ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); + /* Send the actual packet */ - HWIF(drive)->atapi_output_bytes(drive, floppy->pc->c, 12); + hwif->output_data(drive, NULL, floppy->pc->c, 12); + return ide_started; } @@ -569,7 +569,8 @@ static int idefloppy_transfer_pc2(ide_drive_t *drive) idefloppy_floppy_t *floppy = drive->driver_data; /* Send the actual packet */ - HWIF(drive)->atapi_output_bytes(drive, floppy->pc->c, 12); + drive->hwif->output_data(drive, NULL, floppy->pc->c, 12); + /* Timeout for the packet command */ return IDEFLOPPY_WAIT_CMD; } @@ -692,7 +693,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, return ide_started; } else { /* Issue the packet command */ - hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr); + ide_execute_pkt_cmd(drive); return (*pkt_xfer_routine) (drive); } } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 3a2d8930d17..788783da902 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -295,49 +295,6 @@ static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq) spin_unlock_irqrestore(&ide_lock, flags); } -void ide_tf_read(ide_drive_t *drive, ide_task_t *task) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - - if (task->tf_flags & IDE_TFLAG_IN_DATA) { - u16 data = hwif->INW(io_ports->data_addr); - - tf->data = data & 0xff; - tf->hob_data = (data >> 8) & 0xff; - } - - /* be sure we're looking at the low order bits */ - hwif->OUTB(drive->ctl & ~0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_NSECT) - tf->nsect = hwif->INB(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAL) - tf->lbal = hwif->INB(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAM) - tf->lbam = hwif->INB(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAH) - tf->lbah = hwif->INB(io_ports->lbah_addr); - if (task->tf_flags & IDE_TFLAG_IN_DEVICE) - tf->device = hwif->INB(io_ports->device_addr); - - if (task->tf_flags & IDE_TFLAG_LBA48) { - hwif->OUTB(drive->ctl | 0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) - tf->hob_feature = hwif->INB(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = hwif->INB(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = hwif->INB(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = hwif->INB(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = hwif->INB(io_ports->lbah_addr); - } -} - /** * ide_end_drive_cmd - end an explicit drive command * @drive: command @@ -373,7 +330,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) tf->error = err; tf->status = stat; - ide_tf_read(drive, task); + drive->hwif->tf_read(drive, task); if (task->tf_flags & IDE_TFLAG_DYN) kfree(task); @@ -422,7 +379,7 @@ static void try_to_flush_leftover_data (ide_drive_t *drive) u32 wcount = (i > 16) ? 16 : i; i -= wcount; - HWIF(drive)->ata_input_data(drive, buffer, wcount); + drive->hwif->input_data(drive, NULL, buffer, wcount * 4); } } @@ -502,7 +459,8 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT)) /* force an abort */ - hwif->OUTB(WIN_IDLEIMMEDIATE, hwif->io_ports.command_addr); + hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE, + hwif->io_ports.command_addr); if (rq->errors >= ERROR_MAX) { ide_kill_rq(drive, rq); @@ -1679,7 +1637,23 @@ void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma) task.tf.lbam = bcount & 0xff; task.tf.lbah = (bcount >> 8) & 0xff; - ide_tf_load(drive, &task); + ide_tf_dump(drive->name, &task.tf); + drive->hwif->tf_load(drive, &task); } EXPORT_SYMBOL_GPL(ide_pktcmd_tf_load); + +void ide_pad_transfer(ide_drive_t *drive, int write, int len) +{ + ide_hwif_t *hwif = drive->hwif; + u8 buf[4] = { 0 }; + + while (len > 0) { + if (write) + hwif->output_data(drive, NULL, buf, min(4, len)); + else + hwif->input_data(drive, NULL, buf, min(4, len)); + len -= 4; + } +} +EXPORT_SYMBOL_GPL(ide_pad_transfer); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 5425d3038ec..57d9a9a79a6 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -37,21 +37,6 @@ static u8 ide_inb (unsigned long port) return (u8) inb(port); } -static u16 ide_inw (unsigned long port) -{ - return (u16) inw(port); -} - -static void ide_insw (unsigned long port, void *addr, u32 count) -{ - insw(port, addr, count); -} - -static void ide_insl (unsigned long port, void *addr, u32 count) -{ - insl(port, addr, count); -} - static void ide_outb (u8 val, unsigned long port) { outb(val, port); @@ -62,32 +47,11 @@ static void ide_outbsync (ide_drive_t *drive, u8 addr, unsigned long port) outb(addr, port); } -static void ide_outw (u16 val, unsigned long port) -{ - outw(val, port); -} - -static void ide_outsw (unsigned long port, void *addr, u32 count) -{ - outsw(port, addr, count); -} - -static void ide_outsl (unsigned long port, void *addr, u32 count) -{ - outsl(port, addr, count); -} - void default_hwif_iops (ide_hwif_t *hwif) { hwif->OUTB = ide_outb; hwif->OUTBSYNC = ide_outbsync; - hwif->OUTW = ide_outw; - hwif->OUTSW = ide_outsw; - hwif->OUTSL = ide_outsl; hwif->INB = ide_inb; - hwif->INW = ide_inw; - hwif->INSW = ide_insw; - hwif->INSL = ide_insl; } /* @@ -99,21 +63,6 @@ static u8 ide_mm_inb (unsigned long port) return (u8) readb((void __iomem *) port); } -static u16 ide_mm_inw (unsigned long port) -{ - return (u16) readw((void __iomem *) port); -} - -static void ide_mm_insw (unsigned long port, void *addr, u32 count) -{ - __ide_mm_insw((void __iomem *) port, addr, count); -} - -static void ide_mm_insl (unsigned long port, void *addr, u32 count) -{ - __ide_mm_insl((void __iomem *) port, addr, count); -} - static void ide_mm_outb (u8 value, unsigned long port) { writeb(value, (void __iomem *) port); @@ -124,34 +73,13 @@ static void ide_mm_outbsync (ide_drive_t *drive, u8 value, unsigned long port) writeb(value, (void __iomem *) port); } -static void ide_mm_outw (u16 value, unsigned long port) -{ - writew(value, (void __iomem *) port); -} - -static void ide_mm_outsw (unsigned long port, void *addr, u32 count) -{ - __ide_mm_outsw((void __iomem *) port, addr, count); -} - -static void ide_mm_outsl (unsigned long port, void *addr, u32 count) -{ - __ide_mm_outsl((void __iomem *) port, addr, count); -} - void default_hwif_mmiops (ide_hwif_t *hwif) { hwif->OUTB = ide_mm_outb; /* Most systems will need to override OUTBSYNC, alas however this one is controller specific! */ hwif->OUTBSYNC = ide_mm_outbsync; - hwif->OUTW = ide_mm_outw; - hwif->OUTSW = ide_mm_outsw; - hwif->OUTSL = ide_mm_outsl; hwif->INB = ide_mm_inb; - hwif->INW = ide_mm_inw; - hwif->INSW = ide_mm_insw; - hwif->INSL = ide_mm_insl; } EXPORT_SYMBOL(default_hwif_mmiops); @@ -175,6 +103,123 @@ void SELECT_MASK (ide_drive_t *drive, int mask) port_ops->maskproc(drive, mask); } +static void ide_tf_load(ide_drive_t *drive, ide_task_t *task) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + struct ide_taskfile *tf = &task->tf; + void (*tf_outb)(u8 addr, unsigned long port); + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; + + if (mmio) + tf_outb = ide_mm_outb; + else + tf_outb = ide_outb; + + if (task->tf_flags & IDE_TFLAG_FLAGGED) + HIHI = 0xFF; + + ide_set_irq(drive, 1); + + if ((task->tf_flags & IDE_TFLAG_NO_SELECT_MASK) == 0) + SELECT_MASK(drive, 0); + + if (task->tf_flags & IDE_TFLAG_OUT_DATA) { + u16 data = (tf->hob_data << 8) | tf->data; + + if (mmio) + writew(data, (void __iomem *)io_ports->data_addr); + else + outw(data, io_ports->data_addr); + } + + if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) + tf_outb(tf->hob_feature, io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) + tf_outb(tf->hob_nsect, io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) + tf_outb(tf->hob_lbal, io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) + tf_outb(tf->hob_lbam, io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) + tf_outb(tf->hob_lbah, io_ports->lbah_addr); + + if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) + tf_outb(tf->feature, io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_OUT_NSECT) + tf_outb(tf->nsect, io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAL) + tf_outb(tf->lbal, io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAM) + tf_outb(tf->lbam, io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAH) + tf_outb(tf->lbah, io_ports->lbah_addr); + + if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) + tf_outb((tf->device & HIHI) | drive->select.all, + io_ports->device_addr); +} + +static void ide_tf_read(ide_drive_t *drive, ide_task_t *task) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + struct ide_taskfile *tf = &task->tf; + void (*tf_outb)(u8 addr, unsigned long port); + u8 (*tf_inb)(unsigned long port); + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + + if (mmio) { + tf_outb = ide_mm_outb; + tf_inb = ide_mm_inb; + } else { + tf_outb = ide_outb; + tf_inb = ide_inb; + } + + if (task->tf_flags & IDE_TFLAG_IN_DATA) { + u16 data; + + if (mmio) + data = readw((void __iomem *)io_ports->data_addr); + else + data = inw(io_ports->data_addr); + + tf->data = data & 0xff; + tf->hob_data = (data >> 8) & 0xff; + } + + /* be sure we're looking at the low order bits */ + tf_outb(drive->ctl & ~0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_NSECT) + tf->nsect = tf_inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAL) + tf->lbal = tf_inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAM) + tf->lbam = tf_inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAH) + tf->lbah = tf_inb(io_ports->lbah_addr); + if (task->tf_flags & IDE_TFLAG_IN_DEVICE) + tf->device = tf_inb(io_ports->device_addr); + + if (task->tf_flags & IDE_TFLAG_LBA48) { + tf_outb(drive->ctl | 0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) + tf->hob_feature = tf_inb(io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) + tf->hob_nsect = tf_inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) + tf->hob_lbal = tf_inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) + tf->hob_lbam = tf_inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) + tf->hob_lbah = tf_inb(io_ports->lbah_addr); + } +} + /* * Some localbus EIDE interfaces require a special access sequence * when using 32-bit I/O instructions to transfer data. We call this @@ -182,109 +227,112 @@ void SELECT_MASK (ide_drive_t *drive, int mask) * of the sector count register location, with interrupts disabled * to ensure that the reads all happen together. */ -static void ata_vlb_sync(ide_drive_t *drive, unsigned long port) +static void ata_vlb_sync(unsigned long port) { - (void) HWIF(drive)->INB(port); - (void) HWIF(drive)->INB(port); - (void) HWIF(drive)->INB(port); + (void)inb(port); + (void)inb(port); + (void)inb(port); } /* * This is used for most PIO data transfers *from* the IDE interface + * + * These routines will round up any request for an odd number of bytes, + * so if an odd len is specified, be sure that there's at least one + * extra byte allocated for the buffer. */ -static void ata_input_data(ide_drive_t *drive, void *buffer, u32 wcount) +static void ata_input_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; + unsigned long data_addr = io_ports->data_addr; u8 io_32bit = drive->io_32bit; + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + + len++; if (io_32bit) { - if (io_32bit & 2) { - unsigned long flags; + unsigned long uninitialized_var(flags); + if ((io_32bit & 2) && !mmio) { local_irq_save(flags); - ata_vlb_sync(drive, io_ports->nsect_addr); - hwif->INSL(io_ports->data_addr, buffer, wcount); + ata_vlb_sync(io_ports->nsect_addr); + } + + if (mmio) + __ide_mm_insl((void __iomem *)data_addr, buf, len / 4); + else + insl(data_addr, buf, len / 4); + + if ((io_32bit & 2) && !mmio) local_irq_restore(flags); - } else - hwif->INSL(io_ports->data_addr, buffer, wcount); - } else - hwif->INSW(io_ports->data_addr, buffer, wcount << 1); + + if ((len & 3) >= 2) { + if (mmio) + __ide_mm_insw((void __iomem *)data_addr, + (u8 *)buf + (len & ~3), 1); + else + insw(data_addr, (u8 *)buf + (len & ~3), 1); + } + } else { + if (mmio) + __ide_mm_insw((void __iomem *)data_addr, buf, len / 2); + else + insw(data_addr, buf, len / 2); + } } /* * This is used for most PIO data transfers *to* the IDE interface */ -static void ata_output_data(ide_drive_t *drive, void *buffer, u32 wcount) +static void ata_output_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; + unsigned long data_addr = io_ports->data_addr; u8 io_32bit = drive->io_32bit; + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; if (io_32bit) { - if (io_32bit & 2) { - unsigned long flags; + unsigned long uninitialized_var(flags); + if ((io_32bit & 2) && !mmio) { local_irq_save(flags); - ata_vlb_sync(drive, io_ports->nsect_addr); - hwif->OUTSL(io_ports->data_addr, buffer, wcount); - local_irq_restore(flags); - } else - hwif->OUTSL(io_ports->data_addr, buffer, wcount); - } else - hwif->OUTSW(io_ports->data_addr, buffer, wcount << 1); -} - -/* - * The following routines are mainly used by the ATAPI drivers. - * - * These routines will round up any request for an odd number of bytes, - * so if an odd bytecount is specified, be sure that there's at least one - * extra byte allocated for the buffer. - */ - -static void atapi_input_bytes(ide_drive_t *drive, void *buffer, u32 bytecount) -{ - ide_hwif_t *hwif = HWIF(drive); + ata_vlb_sync(io_ports->nsect_addr); + } - ++bytecount; -#if defined(CONFIG_ATARI) || defined(CONFIG_Q40) - if (MACH_IS_ATARI || MACH_IS_Q40) { - /* Atari has a byte-swapped IDE interface */ - insw_swapw(hwif->io_ports.data_addr, buffer, bytecount / 2); - return; - } -#endif /* CONFIG_ATARI || CONFIG_Q40 */ - hwif->ata_input_data(drive, buffer, bytecount / 4); - if ((bytecount & 0x03) >= 2) - hwif->INSW(hwif->io_ports.data_addr, - (u8 *)buffer + (bytecount & ~0x03), 1); -} + if (mmio) + __ide_mm_outsl((void __iomem *)data_addr, buf, len / 4); + else + outsl(data_addr, buf, len / 4); -static void atapi_output_bytes(ide_drive_t *drive, void *buffer, u32 bytecount) -{ - ide_hwif_t *hwif = HWIF(drive); + if ((io_32bit & 2) && !mmio) + local_irq_restore(flags); - ++bytecount; -#if defined(CONFIG_ATARI) || defined(CONFIG_Q40) - if (MACH_IS_ATARI || MACH_IS_Q40) { - /* Atari has a byte-swapped IDE interface */ - outsw_swapw(hwif->io_ports.data_addr, buffer, bytecount / 2); - return; + if ((len & 3) >= 2) { + if (mmio) + __ide_mm_outsw((void __iomem *)data_addr, + (u8 *)buf + (len & ~3), 1); + else + outsw(data_addr, (u8 *)buf + (len & ~3), 1); + } + } else { + if (mmio) + __ide_mm_outsw((void __iomem *)data_addr, buf, len / 2); + else + outsw(data_addr, buf, len / 2); } -#endif /* CONFIG_ATARI || CONFIG_Q40 */ - hwif->ata_output_data(drive, buffer, bytecount / 4); - if ((bytecount & 0x03) >= 2) - hwif->OUTSW(hwif->io_ports.data_addr, - (u8 *)buffer + (bytecount & ~0x03), 1); } void default_hwif_transport(ide_hwif_t *hwif) { - hwif->ata_input_data = ata_input_data; - hwif->ata_output_data = ata_output_data; - hwif->atapi_input_bytes = atapi_input_bytes; - hwif->atapi_output_bytes = atapi_output_bytes; + hwif->tf_load = ide_tf_load; + hwif->tf_read = ide_tf_read; + + hwif->input_data = ata_input_data; + hwif->output_data = ata_output_data; } void ide_fix_driveid (struct hd_driveid *id) @@ -577,6 +625,8 @@ static const struct drive_list_entry ivb_list[] = { { "TSSTcorp CDDVDW SH-S202J" , "SB01" }, { "TSSTcorp CDDVDW SH-S202N" , "SB00" }, { "TSSTcorp CDDVDW SH-S202N" , "SB01" }, + { "TSSTcorp CDDVDW SH-S202H" , "SB00" }, + { "TSSTcorp CDDVDW SH-S202H" , "SB01" }, { NULL , NULL } }; @@ -641,7 +691,7 @@ int ide_driveid_update(ide_drive_t *drive) SELECT_MASK(drive, 1); ide_set_irq(drive, 1); msleep(50); - hwif->OUTB(WIN_IDENTIFY, hwif->io_ports.command_addr); + hwif->OUTBSYNC(drive, WIN_IDENTIFY, hwif->io_ports.command_addr); timeout = jiffies + WAIT_WORSTCASE; do { if (time_after(jiffies, timeout)) { @@ -668,7 +718,7 @@ int ide_driveid_update(ide_drive_t *drive) local_irq_restore(flags); return 0; } - hwif->ata_input_data(drive, id, SECTOR_WORDS); + hwif->input_data(drive, NULL, id, SECTOR_SIZE); (void)ide_read_status(drive); /* clear drive IRQ */ local_irq_enable(); local_irq_restore(flags); @@ -849,9 +899,19 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler, ndelay(400); spin_unlock_irqrestore(&ide_lock, flags); } - EXPORT_SYMBOL(ide_execute_command); +void ide_execute_pkt_cmd(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + unsigned long flags; + + spin_lock_irqsave(&ide_lock, flags); + hwif->OUTBSYNC(drive, WIN_PACKETCMD, hwif->io_ports.command_addr); + ndelay(400); + spin_unlock_irqrestore(&ide_lock, flags); +} +EXPORT_SYMBOL_GPL(ide_execute_pkt_cmd); /* needed below */ static ide_startstop_t do_reset1 (ide_drive_t *, int); diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 6f04ea3e93a..47af80df687 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -487,7 +487,7 @@ static void ide_dump_sector(ide_drive_t *drive) else task.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_DEVICE; - ide_tf_read(drive, &task); + drive->hwif->tf_read(drive, &task); if (lba48 || (tf->device & ATA_LBA)) printk(", LBAsect=%llu", diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 862f02603f9..099a0fe1745 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -124,7 +124,7 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd) id = drive->id; /* read 512 bytes of id info */ - hwif->ata_input_data(drive, id, SECTOR_WORDS); + hwif->input_data(drive, NULL, id, SECTOR_SIZE); drive->id_read = 1; local_irq_enable(); @@ -293,7 +293,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) hwif->OUTB(0, io_ports->feature_addr); /* ask drive for ID */ - hwif->OUTB(cmd, io_ports->command_addr); + hwif->OUTBSYNC(drive, cmd, io_ports->command_addr); timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; timeout += jiffies; @@ -480,7 +480,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) msleep(50); hwif->OUTB(drive->select.all, io_ports->device_addr); msleep(50); - hwif->OUTB(WIN_SRST, io_ports->command_addr); + hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr); (void)ide_busy_sleep(hwif); rc = try_to_identify(drive, cmd); } @@ -516,7 +516,7 @@ static void enable_nest (ide_drive_t *drive) printk("%s: enabling %s -- ", hwif->name, drive->id->model); SELECT_DRIVE(drive); msleep(50); - hwif->OUTB(EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr); + hwif->OUTBSYNC(drive, EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr); if (ide_busy_sleep(hwif)) { printk(KERN_CONT "failed (timeout)\n"); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 29870c41511..54a43b04460 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -395,13 +395,13 @@ static void idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, if (bh == NULL) { printk(KERN_ERR "ide-tape: bh == NULL in " "idetape_input_buffers\n"); - ide_atapi_discard_data(drive, bcount); + ide_pad_transfer(drive, 0, bcount); return; } count = min( (unsigned int)(bh->b_size - atomic_read(&bh->b_count)), bcount); - HWIF(drive)->atapi_input_bytes(drive, bh->b_data + + drive->hwif->input_data(drive, NULL, bh->b_data + atomic_read(&bh->b_count), count); bcount -= count; atomic_add(count, &bh->b_count); @@ -427,7 +427,7 @@ static void idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, return; } count = min((unsigned int)pc->b_count, (unsigned int)bcount); - HWIF(drive)->atapi_output_bytes(drive, pc->b_data, count); + drive->hwif->output_data(drive, NULL, pc->b_data, count); bcount -= count; pc->b_data += count; pc->b_count -= count; @@ -871,7 +871,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) printk(KERN_ERR "ide-tape: The tape wants to " "send us more data than expected " "- discarding data\n"); - ide_atapi_discard_data(drive, bcount); + ide_pad_transfer(drive, 0, bcount); ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); return ide_started; @@ -880,16 +880,16 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) "data than expected - allowing transfer\n"); } iobuf = &idetape_input_buffers; - xferfunc = hwif->atapi_input_bytes; + xferfunc = hwif->input_data; } else { iobuf = &idetape_output_buffers; - xferfunc = hwif->atapi_output_bytes; + xferfunc = hwif->output_data; } if (pc->bh) iobuf(drive, pc, bcount); else - xferfunc(drive, pc->cur_pos, bcount); + xferfunc(drive, NULL, pc->cur_pos, bcount); /* Update the current position */ pc->xferred += bcount; @@ -979,7 +979,8 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) hwif->dma_ops->dma_start(drive); #endif /* Send the actual packet */ - HWIF(drive)->atapi_output_bytes(drive, pc->c, 12); + hwif->output_data(drive, NULL, pc->c, 12); + return ide_started; } @@ -1055,7 +1056,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, IDETAPE_WAIT_CMD, NULL); return ide_started; } else { - hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr); + ide_execute_pkt_cmd(drive); return idetape_transfer_pc(drive); } } diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 9f9ad9fb6b8..9a846a0cd5a 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -33,60 +33,18 @@ #include <asm/uaccess.h> #include <asm/io.h> -void ide_tf_load(ide_drive_t *drive, ide_task_t *task) +void ide_tf_dump(const char *s, struct ide_taskfile *tf) { - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; - - if (task->tf_flags & IDE_TFLAG_FLAGGED) - HIHI = 0xFF; - #ifdef DEBUG printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x " "lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n", - drive->name, tf->feature, tf->nsect, tf->lbal, + s, tf->feature, tf->nsect, tf->lbal, tf->lbam, tf->lbah, tf->device, tf->command); printk("%s: hob: nsect 0x%02x lbal 0x%02x " "lbam 0x%02x lbah 0x%02x\n", - drive->name, tf->hob_nsect, tf->hob_lbal, + s, tf->hob_nsect, tf->hob_lbal, tf->hob_lbam, tf->hob_lbah); #endif - - ide_set_irq(drive, 1); - - if ((task->tf_flags & IDE_TFLAG_NO_SELECT_MASK) == 0) - SELECT_MASK(drive, 0); - - if (task->tf_flags & IDE_TFLAG_OUT_DATA) - hwif->OUTW((tf->hob_data << 8) | tf->data, io_ports->data_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) - hwif->OUTB(tf->hob_feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) - hwif->OUTB(tf->hob_nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) - hwif->OUTB(tf->hob_lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) - hwif->OUTB(tf->hob_lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) - hwif->OUTB(tf->hob_lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) - hwif->OUTB(tf->feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_NSECT) - hwif->OUTB(tf->nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAL) - hwif->OUTB(tf->lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAM) - hwif->OUTB(tf->lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAH) - hwif->OUTB(tf->lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) - hwif->OUTB((tf->device & HIHI) | drive->select.all, - io_ports->device_addr); } int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) @@ -149,8 +107,10 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) if (task->tf_flags & IDE_TFLAG_FLAGGED) task->tf_flags |= IDE_TFLAG_FLAGGED_SET_IN_FLAGS; - if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) - ide_tf_load(drive, task); + if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) { + ide_tf_dump(drive->name, tf); + hwif->tf_load(drive, task); + } switch (task->data_phase) { case TASKFILE_MULTI_OUT: @@ -283,7 +243,8 @@ static u8 wait_drive_not_busy(ide_drive_t *drive) return stat; } -static void ide_pio_sector(ide_drive_t *drive, unsigned int write) +static void ide_pio_sector(ide_drive_t *drive, struct request *rq, + unsigned int write) { ide_hwif_t *hwif = drive->hwif; struct scatterlist *sg = hwif->sg_table; @@ -323,9 +284,9 @@ static void ide_pio_sector(ide_drive_t *drive, unsigned int write) /* do the actual data transfer */ if (write) - hwif->ata_output_data(drive, buf, SECTOR_WORDS); + hwif->output_data(drive, rq, buf, SECTOR_SIZE); else - hwif->ata_input_data(drive, buf, SECTOR_WORDS); + hwif->input_data(drive, rq, buf, SECTOR_SIZE); kunmap_atomic(buf, KM_BIO_SRC_IRQ); #ifdef CONFIG_HIGHMEM @@ -333,13 +294,14 @@ static void ide_pio_sector(ide_drive_t *drive, unsigned int write) #endif } -static void ide_pio_multi(ide_drive_t *drive, unsigned int write) +static void ide_pio_multi(ide_drive_t *drive, struct request *rq, + unsigned int write) { unsigned int nsect; nsect = min_t(unsigned int, drive->hwif->nleft, drive->mult_count); while (nsect--) - ide_pio_sector(drive, write); + ide_pio_sector(drive, rq, write); } static void ide_pio_datablock(ide_drive_t *drive, struct request *rq, @@ -362,10 +324,10 @@ static void ide_pio_datablock(ide_drive_t *drive, struct request *rq, switch (drive->hwif->data_phase) { case TASKFILE_MULTI_IN: case TASKFILE_MULTI_OUT: - ide_pio_multi(drive, write); + ide_pio_multi(drive, rq, write); break; default: - ide_pio_sector(drive, write); + ide_pio_sector(drive, rq, write); break; } diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index 56cdaa0eeea..83555ca513b 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -44,6 +44,28 @@ int falconide_intr_lock; EXPORT_SYMBOL(falconide_intr_lock); +static void falconide_input_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) +{ + unsigned long data_addr = drive->hwif->io_ports.data_addr; + + if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS) + return insw(data_addr, buf, (len + 1) / 2); + + insw_swapw(data_addr, buf, (len + 1) / 2); +} + +static void falconide_output_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) +{ + unsigned long data_addr = drive->hwif->io_ports.data_addr; + + if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS) + return outsw(data_adr, buf, (len + 1) / 2); + + outsw_swapw(data_addr, buf, (len + 1) / 2); +} + static void __init falconide_setup_ports(hw_regs_t *hw) { int i; @@ -90,6 +112,10 @@ static int __init falconide_init(void) ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); + /* Atari has a byte-swapped IDE interface */ + hwif->input_data = falconide_input_data; + hwif->output_data = falconide_output_data; + ide_get_lock(NULL, NULL); ide_device_add(idx, NULL); ide_release_lock(); diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c index 8279dc7ca4c..d3bc3f24e05 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/legacy/ide_platform.c @@ -101,8 +101,10 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) ide_init_port_hw(hwif, &hw); - if (mmio) + if (mmio) { + hwif->host_flags = IDE_HFLAG_MMIO; default_hwif_mmiops(hwif); + } idx[0] = hwif->index; diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index f9210458aea..6f535d00e63 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -72,7 +72,27 @@ static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base, hw->ack_intr = ack_intr; } +static void q40ide_input_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) +{ + unsigned long data_addr = drive->hwif->io_ports.data_addr; + + if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS) + return insw(data_addr, buf, (len + 1) / 2); + insw_swapw(data_addr, buf, (len + 1) / 2); +} + +static void q40ide_output_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) +{ + unsigned long data_addr = drive->hwif->io_ports.data_addr; + + if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS) + return outsw(data_addr, buf, (len + 1) / 2); + + outsw_swapw(data_addr, buf, (len + 1) / 2); +} /* * the static array is needed to have the name reported in /proc/ioports, @@ -123,6 +143,10 @@ static int __init q40ide_init(void) ide_init_port_data(hwif, hwif->index); ide_init_port_hw(hwif, &hw); + /* Q40 has a byte-swapped IDE interface */ + hwif->input_data = q40ide_input_data; + hwif->output_data = q40ide_output_data; + idx[i] = hwif->index; } } diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index e0cf5e2dbab..1a6c27b3249 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -48,8 +48,6 @@ static _auide_hwif auide_hwif; -static int auide_ddma_init(_auide_hwif *auide); - #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) void auide_insw(unsigned long port, void *addr, u32 count) @@ -88,6 +86,17 @@ void auide_outsw(unsigned long port, void *addr, u32 count) ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); } +static void au1xxx_input_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) +{ + auide_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2); +} + +static void au1xxx_output_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) +{ + auide_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2); +} #endif static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio) @@ -598,8 +607,8 @@ static int au_ide_probe(struct device *dev) */ #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - hwif->INSW = auide_insw; - hwif->OUTSW = auide_outsw; + hwif->input_data = au1xxx_input_data; + hwif->output_data = au1xxx_output_data; #endif hwif->select_data = 0; /* no chipset-specific code */ hwif->config_data = 0; /* no chipset-specific code */ diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index 68947626e4a..712d17bdd47 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -109,6 +109,7 @@ static int __devinit swarm_ide_probe(struct device *dev) base = ioremap(offset, size); /* Setup MMIO ops. */ + hwif->host_flags = IDE_HFLAG_MMIO; default_hwif_mmiops(hwif); hwif->chipset = ide_generic; diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c index c13e299077e..fec4955f449 100644 --- a/drivers/ide/pci/ns87415.c +++ b/drivers/ide/pci/ns87415.c @@ -63,6 +63,48 @@ static u8 superio_ide_inb (unsigned long port) return inb(port); } +static void superio_tf_read(ide_drive_t *drive, ide_task_t *task) +{ + struct ide_io_ports *io_ports = &drive->hwif->io_ports; + struct ide_taskfile *tf = &task->tf; + + if (task->tf_flags & IDE_TFLAG_IN_DATA) { + u16 data = inw(io_ports->data_addr); + + tf->data = data & 0xff; + tf->hob_data = (data >> 8) & 0xff; + } + + /* be sure we're looking at the low order bits */ + outb(drive->ctl & ~0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_NSECT) + tf->nsect = inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAL) + tf->lbal = inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAM) + tf->lbam = inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAH) + tf->lbah = inb(io_ports->lbah_addr); + if (task->tf_flags & IDE_TFLAG_IN_DEVICE) + tf->device = superio_ide_inb(io_ports->device_addr); + + if (task->tf_flags & IDE_TFLAG_LBA48) { + outb(drive->ctl | 0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) + tf->hob_feature = inb(io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) + tf->hob_nsect = inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) + tf->hob_lbal = inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) + tf->hob_lbam = inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) + tf->hob_lbah = inb(io_ports->lbah_addr); + } +} + static void __devinit superio_ide_init_iops (struct hwif_s *hwif) { struct pci_dev *pdev = to_pci_dev(hwif->dev); @@ -80,6 +122,8 @@ static void __devinit superio_ide_init_iops (struct hwif_s *hwif) tmp = superio_ide_inb(superio_ide_dma_status[port]); outb(tmp | 0x66, superio_ide_dma_status[port]); + hwif->tf_read = superio_tf_read; + /* We need to override inb to workaround a SuperIO errata */ hwif->INB = superio_ide_inb; } diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index ec9bd7b352f..070df8ab3b2 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -83,8 +83,8 @@ static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index) { u8 value; - outb(index, hwif->dma_vendor1); - value = inb(hwif->dma_vendor3); + outb(index, hwif->dma_base + 1); + value = inb(hwif->dma_base + 3); DBG("index[%02X] value[%02X]\n", index, value); return value; @@ -97,8 +97,8 @@ static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index) */ static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value) { - outb(index, hwif->dma_vendor1); - outb(value, hwif->dma_vendor3); + outb(index, hwif->dma_base + 1); + outb(value, hwif->dma_base + 3); DBG("index[%02X] value[%02X]\n", index, value); } diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index 21c5dd23f92..f04738d14a6 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -250,6 +250,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */ + { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ /* end marker */ { 0, } }; diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index ad7cdf9060c..910fb00deb7 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -126,12 +126,6 @@ static u8 scc_ide_inb(unsigned long port) return (u8)data; } -static u16 scc_ide_inw(unsigned long port) -{ - u32 data = in_be32((void*)port); - return (u16)data; -} - static void scc_ide_insw(unsigned long port, void *addr, u32 count) { u16 *ptr = (u16 *)addr; @@ -154,11 +148,6 @@ static void scc_ide_outb(u8 addr, unsigned long port) out_be32((void*)port, addr); } -static void scc_ide_outw(u16 addr, unsigned long port) -{ - out_be32((void*)port, addr); -} - static void scc_ide_outbsync(ide_drive_t * drive, u8 addr, unsigned long port) { @@ -271,6 +260,20 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed) out_be32((void __iomem *)udenvt_port, reg); } +static void scc_dma_host_set(ide_drive_t *drive, int on) +{ + ide_hwif_t *hwif = drive->hwif; + u8 unit = (drive->select.b.unit & 0x01); + u8 dma_stat = scc_ide_inb(hwif->dma_status); + + if (on) + dma_stat |= (1 << (5 + unit)); + else + dma_stat &= ~(1 << (5 + unit)); + + scc_ide_outb(dma_stat, hwif->dma_status); +} + /** * scc_ide_dma_setup - begin a DMA phase * @drive: target device @@ -301,7 +304,7 @@ static int scc_dma_setup(ide_drive_t *drive) } /* PRD table */ - out_be32((void __iomem *)hwif->dma_prdtable, hwif->dmatable_dma); + out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma); /* specify r/w */ out_be32((void __iomem *)hwif->dma_command, reading); @@ -315,13 +318,45 @@ static int scc_dma_setup(ide_drive_t *drive) return 0; } +static void scc_dma_start(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + u8 dma_cmd = scc_ide_inb(hwif->dma_command); + + /* start DMA */ + scc_ide_outb(dma_cmd | 1, hwif->dma_command); + hwif->dma = 1; + wmb(); +} + +static int __scc_dma_end(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + u8 dma_stat, dma_cmd; + + drive->waiting_for_dma = 0; + /* get DMA command mode */ + dma_cmd = scc_ide_inb(hwif->dma_command); + /* stop DMA */ + scc_ide_outb(dma_cmd & ~1, hwif->dma_command); + /* get DMA status */ + dma_stat = scc_ide_inb(hwif->dma_status); + /* clear the INTR & ERROR bits */ + scc_ide_outb(dma_stat | 6, hwif->dma_status); + /* purge DMA mappings */ + ide_destroy_dmatable(drive); + /* verify good DMA status */ + hwif->dma = 0; + wmb(); + return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; +} /** * scc_dma_end - Stop DMA * @drive: IDE drive * * Check and clear INT Status register. - * Then call __ide_dma_end(). + * Then call __scc_dma_end(). */ static int scc_dma_end(ide_drive_t *drive) @@ -425,7 +460,7 @@ static int scc_dma_end(ide_drive_t *drive) break; } - dma_stat = __ide_dma_end(drive); + dma_stat = __scc_dma_end(drive); if (data_loss) dma_stat |= 2; /* emulate DMA error (to retry command) */ return dma_stat; @@ -618,6 +653,122 @@ static int __devinit init_setup_scc(struct pci_dev *dev, return rc; } +static void scc_tf_load(ide_drive_t *drive, ide_task_t *task) +{ + struct ide_io_ports *io_ports = &drive->hwif->io_ports; + struct ide_taskfile *tf = &task->tf; + u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; + + if (task->tf_flags & IDE_TFLAG_FLAGGED) + HIHI = 0xFF; + + ide_set_irq(drive, 1); + + if (task->tf_flags & IDE_TFLAG_OUT_DATA) + out_be32((void *)io_ports->data_addr, + (tf->hob_data << 8) | tf->data); + + if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) + scc_ide_outb(tf->hob_feature, io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) + scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) + scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) + scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) + scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr); + + if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) + scc_ide_outb(tf->feature, io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_OUT_NSECT) + scc_ide_outb(tf->nsect, io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAL) + scc_ide_outb(tf->lbal, io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAM) + scc_ide_outb(tf->lbam, io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAH) + scc_ide_outb(tf->lbah, io_ports->lbah_addr); + + if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) + scc_ide_outb((tf->device & HIHI) | drive->select.all, + io_ports->device_addr); +} + +static void scc_tf_read(ide_drive_t *drive, ide_task_t *task) +{ + struct ide_io_ports *io_ports = &drive->hwif->io_ports; + struct ide_taskfile *tf = &task->tf; + + if (task->tf_flags & IDE_TFLAG_IN_DATA) { + u16 data = (u16)in_be32((void *)io_ports->data_addr); + + tf->data = data & 0xff; + tf->hob_data = (data >> 8) & 0xff; + } + + /* be sure we're looking at the low order bits */ + scc_ide_outb(drive->ctl & ~0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_NSECT) + tf->nsect = scc_ide_inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAL) + tf->lbal = scc_ide_inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAM) + tf->lbam = scc_ide_inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAH) + tf->lbah = scc_ide_inb(io_ports->lbah_addr); + if (task->tf_flags & IDE_TFLAG_IN_DEVICE) + tf->device = scc_ide_inb(io_ports->device_addr); + + if (task->tf_flags & IDE_TFLAG_LBA48) { + scc_ide_outb(drive->ctl | 0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) + tf->hob_feature = scc_ide_inb(io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) + tf->hob_nsect = scc_ide_inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) + tf->hob_lbal = scc_ide_inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) + tf->hob_lbam = scc_ide_inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) + tf->hob_lbah = scc_ide_inb(io_ports->lbah_addr); + } +} + +static void scc_input_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) +{ + unsigned long data_addr = drive->hwif->io_ports.data_addr; + + len++; + + if (drive->io_32bit) { + scc_ide_insl(data_addr, buf, len / 4); + + if ((len & 3) >= 2) + scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1); + } else + scc_ide_insw(data_addr, buf, len / 2); +} + +static void scc_output_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) +{ + unsigned long data_addr = drive->hwif->io_ports.data_addr; + + len++; + + if (drive->io_32bit) { + scc_ide_outsl(data_addr, buf, len / 4); + + if ((len & 3) >= 2) + scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1); + } else + scc_ide_outsw(data_addr, buf, len / 2); +} + /** * init_mmio_iops_scc - set up the iops for MMIO * @hwif: interface to set up @@ -632,15 +783,15 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif) ide_set_hwifdata(hwif, ports); + hwif->tf_load = scc_tf_load; + hwif->tf_read = scc_tf_read; + + hwif->input_data = scc_input_data; + hwif->output_data = scc_output_data; + hwif->INB = scc_ide_inb; - hwif->INW = scc_ide_inw; - hwif->INSW = scc_ide_insw; - hwif->INSL = scc_ide_insl; hwif->OUTB = scc_ide_outb; hwif->OUTBSYNC = scc_ide_outbsync; - hwif->OUTW = scc_ide_outw; - hwif->OUTSW = scc_ide_outsw; - hwif->OUTSL = scc_ide_outsl; hwif->dma_base = dma_base; hwif->config_data = ports->ctl; @@ -687,7 +838,6 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif) hwif->dma_command = hwif->dma_base; hwif->dma_status = hwif->dma_base + 0x04; - hwif->dma_prdtable = hwif->dma_base + 0x08; /* PTERADD */ out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma); @@ -706,10 +856,10 @@ static const struct ide_port_ops scc_port_ops = { }; static const struct ide_dma_ops scc_dma_ops = { - .dma_host_set = ide_dma_host_set, + .dma_host_set = scc_dma_host_set, .dma_setup = scc_dma_setup, .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, + .dma_start = scc_dma_start, .dma_end = scc_dma_end, .dma_test_irq = scc_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 63e28f4e6d3..16a0bce17d6 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -573,6 +573,7 @@ static const struct ide_port_info sgiioc4_port_info __devinitdata = { .init_dma = ide_dma_sgiioc4, .port_ops = &sgiioc4_port_ops, .dma_ops = &sgiioc4_dma_ops, + .host_flags = IDE_HFLAG_MMIO, .mwdma_mask = ATA_MWDMA2_ONLY, }; diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index c2040a017f4..4cf8fc54aa2 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -1,8 +1,8 @@ /* * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2003 Red Hat <alan@redhat.com> - * Copyright (C) 2007 MontaVista Software, Inc. - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2008 MontaVista Software, Inc. + * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz * * May be copied or modified under the terms of the GNU General Public License * @@ -17,10 +17,10 @@ * * FAQ Items: * If you are using Marvell SATA-IDE adapters with Maxtor drives - * ensure the system is set up for ATA100/UDMA5 not UDMA6. + * ensure the system is set up for ATA100/UDMA5, not UDMA6. * * If you are using WD drives with SATA bridges you must set the - * drive to "Single". "Master" will hang + * drive to "Single". "Master" will hang. * * If you have strange problems with nVidia chipset systems please * see the SI support documentation and update your system BIOS @@ -42,25 +42,24 @@ #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> - -#include <asm/io.h> +#include <linux/io.h> /** * pdev_is_sata - check if device is SATA * @pdev: PCI device to check - * + * * Returns true if this is a SATA controller */ - + static int pdev_is_sata(struct pci_dev *pdev) { #ifdef CONFIG_BLK_DEV_IDE_SATA - switch(pdev->device) { - case PCI_DEVICE_ID_SII_3112: - case PCI_DEVICE_ID_SII_1210SA: - return 1; - case PCI_DEVICE_ID_SII_680: - return 0; + switch (pdev->device) { + case PCI_DEVICE_ID_SII_3112: + case PCI_DEVICE_ID_SII_1210SA: + return 1; + case PCI_DEVICE_ID_SII_680: + return 0; } BUG(); #endif @@ -70,10 +69,10 @@ static int pdev_is_sata(struct pci_dev *pdev) /** * is_sata - check if hwif is SATA * @hwif: interface to check - * + * * Returns true if this is a SATA controller */ - + static inline int is_sata(ide_hwif_t *hwif) { return pdev_is_sata(to_pci_dev(hwif->dev)); @@ -86,21 +85,22 @@ static inline int is_sata(ide_hwif_t *hwif) * * Turn a config register offset into the right address in either * PCI space or MMIO space to access the control register in question - * Thankfully this is a configuration operation so isnt performance - * criticial. + * Thankfully this is a configuration operation, so isn't performance + * critical. */ - + static unsigned long siimage_selreg(ide_hwif_t *hwif, int r) { unsigned long base = (unsigned long)hwif->hwif_data; + base += 0xA0 + r; - if(hwif->mmio) - base += (hwif->channel << 6); + if (hwif->mmio) + base += hwif->channel << 6; else - base += (hwif->channel << 4); + base += hwif->channel << 4; return base; } - + /** * siimage_seldev - return register base * @hwif: interface @@ -110,20 +110,69 @@ static unsigned long siimage_selreg(ide_hwif_t *hwif, int r) * PCI space or MMIO space to access the control register in question * including accounting for the unit shift. */ - + static inline unsigned long siimage_seldev(ide_drive_t *drive, int r) { ide_hwif_t *hwif = HWIF(drive); - unsigned long base = (unsigned long)hwif->hwif_data; + unsigned long base = (unsigned long)hwif->hwif_data; + base += 0xA0 + r; - if(hwif->mmio) - base += (hwif->channel << 6); + if (hwif->mmio) + base += hwif->channel << 6; else - base += (hwif->channel << 4); + base += hwif->channel << 4; base |= drive->select.b.unit << drive->select.b.unit; return base; } +static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr) +{ + u8 tmp = 0; + + if (pci_get_drvdata(dev)) + tmp = readb((void __iomem *)addr); + else + pci_read_config_byte(dev, addr, &tmp); + + return tmp; +} + +static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr) +{ + u16 tmp = 0; + + if (pci_get_drvdata(dev)) + tmp = readw((void __iomem *)addr); + else + pci_read_config_word(dev, addr, &tmp); + + return tmp; +} + +static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr) +{ + if (pci_get_drvdata(dev)) + writeb(val, (void __iomem *)addr); + else + pci_write_config_byte(dev, addr, val); +} + +static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr) +{ + if (pci_get_drvdata(dev)) + writew(val, (void __iomem *)addr); + else + pci_write_config_word(dev, addr, val); +} + +static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr) +{ + if (pci_get_drvdata(dev)) + writel(val, (void __iomem *)addr); + else + pci_write_config_dword(dev, addr, val); +} + /** * sil_udma_filter - compute UDMA mask * @drive: IDE device @@ -136,24 +185,26 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r) static u8 sil_pata_udma_filter(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned long base = (unsigned long) hwif->hwif_data; - u8 mask = 0, scsc = 0; + ide_hwif_t *hwif = drive->hwif; + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long base = (unsigned long)hwif->hwif_data; + u8 scsc, mask = 0; - if (hwif->mmio) - scsc = hwif->INB(base + 0x4A); - else - pci_read_config_byte(dev, 0x8A, &scsc); + scsc = sil_ioread8(dev, base + (hwif->mmio ? 0x4A : 0x8A)); - if ((scsc & 0x30) == 0x10) /* 133 */ + switch (scsc & 0x30) { + case 0x10: /* 133 */ mask = ATA_UDMA6; - else if ((scsc & 0x30) == 0x20) /* 2xPCI */ + break; + case 0x20: /* 2xPCI */ mask = ATA_UDMA6; - else if ((scsc & 0x30) == 0x00) /* 100 */ + break; + case 0x00: /* 100 */ mask = ATA_UDMA5; - else /* Disabled ? */ + break; + default: /* Disabled ? */ BUG(); + } return mask; } @@ -175,15 +226,16 @@ static u8 sil_sata_udma_filter(ide_drive_t *drive) static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) { - const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 }; - const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 }; + static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 }; + static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 }; ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = to_pci_dev(hwif->dev); ide_drive_t *pair = ide_get_paired_drive(drive); u32 speedt = 0; u16 speedp = 0; unsigned long addr = siimage_seldev(drive, 0x04); - unsigned long tfaddr = siimage_selreg(hwif, 0x02); + unsigned long tfaddr = siimage_selreg(hwif, 0x02); unsigned long base = (unsigned long)hwif->hwif_data; u8 tf_pio = pio; u8 addr_mask = hwif->channel ? (hwif->mmio ? 0xF4 : 0x84) @@ -203,36 +255,20 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) speedp = data_speed[pio]; speedt = tf_speed[tf_pio]; - if (hwif->mmio) { - hwif->OUTW(speedp, addr); - hwif->OUTW(speedt, tfaddr); - /* Now set up IORDY */ - if (pio > 2) - hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2); - else - hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2); - - mode = hwif->INB(base + addr_mask); - mode &= ~(unit ? 0x30 : 0x03); - mode |= (unit ? 0x10 : 0x01); - hwif->OUTB(mode, base + addr_mask); - } else { - struct pci_dev *dev = to_pci_dev(hwif->dev); - - pci_write_config_word(dev, addr, speedp); - pci_write_config_word(dev, tfaddr, speedt); - pci_read_config_word(dev, tfaddr - 2, &speedp); - speedp &= ~0x200; - /* Set IORDY for mode 3 or 4 */ - if (pio > 2) - speedp |= 0x200; - pci_write_config_word(dev, tfaddr - 2, speedp); - - pci_read_config_byte(dev, addr_mask, &mode); - mode &= ~(unit ? 0x30 : 0x03); - mode |= (unit ? 0x10 : 0x01); - pci_write_config_byte(dev, addr_mask, mode); - } + sil_iowrite16(dev, speedp, addr); + sil_iowrite16(dev, speedt, tfaddr); + + /* now set up IORDY */ + speedp = sil_ioread16(dev, tfaddr - 2); + speedp &= ~0x200; + if (pio > 2) + speedp |= 0x200; + sil_iowrite16(dev, speedp, tfaddr - 2); + + mode = sil_ioread8(dev, base + addr_mask); + mode &= ~(unit ? 0x30 : 0x03); + mode |= unit ? 0x10 : 0x01; + sil_iowrite8(dev, mode, base + addr_mask); } /** @@ -245,59 +281,45 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) { - u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }; - u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 }; - u16 dma[] = { 0x2208, 0x10C2, 0x10C1 }; + static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }; + static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 }; + static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 }; ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); u16 ultra = 0, multi = 0; u8 mode = 0, unit = drive->select.b.unit; unsigned long base = (unsigned long)hwif->hwif_data; - u8 scsc = 0, addr_mask = ((hwif->channel) ? - ((hwif->mmio) ? 0xF4 : 0x84) : - ((hwif->mmio) ? 0xB4 : 0x80)); - + u8 scsc = 0, addr_mask = hwif->channel ? + (hwif->mmio ? 0xF4 : 0x84) : + (hwif->mmio ? 0xB4 : 0x80); unsigned long ma = siimage_seldev(drive, 0x08); unsigned long ua = siimage_seldev(drive, 0x0C); - if (hwif->mmio) { - scsc = hwif->INB(base + 0x4A); - mode = hwif->INB(base + addr_mask); - multi = hwif->INW(ma); - ultra = hwif->INW(ua); - } else { - pci_read_config_byte(dev, 0x8A, &scsc); - pci_read_config_byte(dev, addr_mask, &mode); - pci_read_config_word(dev, ma, &multi); - pci_read_config_word(dev, ua, &ultra); - } + scsc = sil_ioread8 (dev, base + (hwif->mmio ? 0x4A : 0x8A)); + mode = sil_ioread8 (dev, base + addr_mask); + multi = sil_ioread16(dev, ma); + ultra = sil_ioread16(dev, ua); - mode &= ~((unit) ? 0x30 : 0x03); + mode &= ~(unit ? 0x30 : 0x03); ultra &= ~0x3F; scsc = ((scsc & 0x30) == 0x00) ? 0 : 1; scsc = is_sata(hwif) ? 1 : scsc; if (speed >= XFER_UDMA_0) { - multi = dma[2]; - ultra |= (scsc ? ultra6[speed - XFER_UDMA_0] : - ultra5[speed - XFER_UDMA_0]); - mode |= (unit ? 0x30 : 0x03); + multi = dma[2]; + ultra |= scsc ? ultra6[speed - XFER_UDMA_0] : + ultra5[speed - XFER_UDMA_0]; + mode |= unit ? 0x30 : 0x03; } else { multi = dma[speed - XFER_MW_DMA_0]; - mode |= (unit ? 0x20 : 0x02); + mode |= unit ? 0x20 : 0x02; } - if (hwif->mmio) { - hwif->OUTB(mode, base + addr_mask); - hwif->OUTW(multi, ma); - hwif->OUTW(ultra, ua); - } else { - pci_write_config_byte(dev, addr_mask, mode); - pci_write_config_word(dev, ma, multi); - pci_write_config_word(dev, ua, ultra); - } + sil_iowrite8 (dev, mode, base + addr_mask); + sil_iowrite16(dev, multi, ma); + sil_iowrite16(dev, ultra, ua); } /* returns 1 if dma irq issued, 0 otherwise */ @@ -309,13 +331,14 @@ static int siimage_io_dma_test_irq(ide_drive_t *drive) unsigned long addr = siimage_selreg(hwif, 1); /* return 1 if INTR asserted */ - if ((hwif->INB(hwif->dma_status) & 4) == 4) + if (hwif->INB(hwif->dma_status) & 4) return 1; /* return 1 if Device INTR asserted */ pci_read_config_byte(dev, addr, &dma_altstat); if (dma_altstat & 8) - return 0; //return 1; + return 0; /* return 1; */ + return 0; } @@ -335,9 +358,9 @@ static int siimage_mmio_dma_test_irq(ide_drive_t *drive) = (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET]; if (sata_error_addr) { - unsigned long base = (unsigned long)hwif->hwif_data; - u32 ext_stat = readl((void __iomem *)(base + 0x10)); - u8 watchdog = 0; + unsigned long base = (unsigned long)hwif->hwif_data; + u32 ext_stat = readl((void __iomem *)(base + 0x10)); + u8 watchdog = 0; if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) { u32 sata_error = readl(sata_error_addr); @@ -346,25 +369,22 @@ static int siimage_mmio_dma_test_irq(ide_drive_t *drive) watchdog = (sata_error & 0x00680000) ? 1 : 0; printk(KERN_WARNING "%s: sata_error = 0x%08x, " "watchdog = %d, %s\n", - drive->name, sata_error, watchdog, - __func__); - - } else { + drive->name, sata_error, watchdog, __func__); + } else watchdog = (ext_stat & 0x8000) ? 1 : 0; - } - ext_stat >>= 16; + ext_stat >>= 16; if (!(ext_stat & 0x0404) && !watchdog) return 0; } /* return 1 if INTR asserted */ - if ((readb((void __iomem *)hwif->dma_status) & 0x04) == 0x04) + if (readb((void __iomem *)hwif->dma_status) & 0x04) return 1; /* return 1 if Device INTR asserted */ - if ((readb((void __iomem *)addr) & 8) == 8) - return 0; //return 1; + if (readb((void __iomem *)addr) & 8) + return 0; /* return 1; */ return 0; } @@ -423,63 +443,33 @@ static void sil_sata_pre_reset(ide_drive_t *drive) } /** - * proc_reports_siimage - add siimage controller to proc - * @dev: PCI device - * @clocking: SCSC value - * @name: controller name - * - * Report the clocking mode of the controller and add it to - * the /proc interface layer - */ - -static void proc_reports_siimage (struct pci_dev *dev, u8 clocking, const char *name) -{ - if (!pdev_is_sata(dev)) { - printk(KERN_INFO "%s: BASE CLOCK ", name); - clocking &= 0x03; - switch (clocking) { - case 0x03: printk("DISABLED!\n"); break; - case 0x02: printk("== 2X PCI\n"); break; - case 0x01: printk("== 133\n"); break; - case 0x00: printk("== 100\n"); break; - } - } -} - -/** - * setup_mmio_siimage - switch an SI controller into MMIO + * setup_mmio_siimage - switch controller into MMIO mode * @dev: PCI device we are configuring * @name: device name * - * Attempt to put the device into mmio mode. There are some slight - * complications here with certain systems where the mmio bar isnt - * mapped so we have to be sure we can fall back to I/O. + * Attempt to put the device into MMIO mode. There are some slight + * complications here with certain systems where the MMIO BAR isn't + * mapped, so we have to be sure that we can fall back to I/O. */ - -static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name) + +static unsigned int setup_mmio_siimage(struct pci_dev *dev, const char *name) { resource_size_t bar5 = pci_resource_start(dev, 5); unsigned long barsize = pci_resource_len(dev, 5); - u8 tmpbyte = 0; void __iomem *ioaddr; - u32 tmp, irq_mask; /* - * Drop back to PIO if we can't map the mmio. Some - * systems seem to get terminally confused in the PCI - * spaces. + * Drop back to PIO if we can't map the MMIO. Some systems + * seem to get terminally confused in the PCI spaces. */ - - if(!request_mem_region(bar5, barsize, name)) - { - printk(KERN_WARNING "siimage: IDE controller MMIO ports not available.\n"); + if (!request_mem_region(bar5, barsize, name)) { + printk(KERN_WARNING "siimage: IDE controller MMIO ports not " + "available.\n"); return 0; } - - ioaddr = ioremap(bar5, barsize); - if (ioaddr == NULL) - { + ioaddr = ioremap(bar5, barsize); + if (ioaddr == NULL) { release_mem_region(bar5, barsize); return 0; } @@ -487,62 +477,6 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name) pci_set_master(dev); pci_set_drvdata(dev, (void *) ioaddr); - if (pdev_is_sata(dev)) { - /* make sure IDE0/1 interrupts are not masked */ - irq_mask = (1 << 22) | (1 << 23); - tmp = readl(ioaddr + 0x48); - if (tmp & irq_mask) { - tmp &= ~irq_mask; - writel(tmp, ioaddr + 0x48); - readl(ioaddr + 0x48); /* flush */ - } - writel(0, ioaddr + 0x148); - writel(0, ioaddr + 0x1C8); - } - - writeb(0, ioaddr + 0xB4); - writeb(0, ioaddr + 0xF4); - tmpbyte = readb(ioaddr + 0x4A); - - switch(tmpbyte & 0x30) { - case 0x00: - /* In 100 MHz clocking, try and switch to 133 */ - writeb(tmpbyte|0x10, ioaddr + 0x4A); - break; - case 0x10: - /* On 133Mhz clocking */ - break; - case 0x20: - /* On PCIx2 clocking */ - break; - case 0x30: - /* Clocking is disabled */ - /* 133 clock attempt to force it on */ - writeb(tmpbyte & ~0x20, ioaddr + 0x4A); - break; - } - - writeb( 0x72, ioaddr + 0xA1); - writew( 0x328A, ioaddr + 0xA2); - writel(0x62DD62DD, ioaddr + 0xA4); - writel(0x43924392, ioaddr + 0xA8); - writel(0x40094009, ioaddr + 0xAC); - writeb( 0x72, ioaddr + 0xE1); - writew( 0x328A, ioaddr + 0xE2); - writel(0x62DD62DD, ioaddr + 0xE4); - writel(0x43924392, ioaddr + 0xE8); - writel(0x40094009, ioaddr + 0xEC); - - if (pdev_is_sata(dev)) { - writel(0xFFFF0000, ioaddr + 0x108); - writel(0xFFFF0000, ioaddr + 0x188); - writel(0x00680000, ioaddr + 0x148); - writel(0x00680000, ioaddr + 0x1C8); - } - - tmpbyte = readb(ioaddr + 0x4A); - - proc_reports_siimage(dev, (tmpbyte>>4), name); return 1; } @@ -552,55 +486,92 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name) * @name: device name * * Perform the initial PCI set up for this device. Attempt to switch - * to 133MHz clocking if the system isn't already set up to do it. + * to 133 MHz clocking if the system isn't already set up to do it. */ -static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const char *name) +static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, + const char *name) { - u8 rev = dev->revision, tmpbyte = 0, BA5_EN = 0; + unsigned long base, scsc_addr; + void __iomem *ioaddr = NULL; + u8 rev = dev->revision, tmp, BA5_EN; pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255); pci_read_config_byte(dev, 0x8A, &BA5_EN); - if ((BA5_EN & 0x01) || (pci_resource_start(dev, 5))) { - if (setup_mmio_siimage(dev, name)) { - return 0; + + if ((BA5_EN & 0x01) || pci_resource_start(dev, 5)) + if (setup_mmio_siimage(dev, name)) + ioaddr = pci_get_drvdata(dev); + + base = (unsigned long)ioaddr; + + if (ioaddr && pdev_is_sata(dev)) { + u32 tmp32, irq_mask; + + /* make sure IDE0/1 interrupts are not masked */ + irq_mask = (1 << 22) | (1 << 23); + tmp32 = readl(ioaddr + 0x48); + if (tmp32 & irq_mask) { + tmp32 &= ~irq_mask; + writel(tmp32, ioaddr + 0x48); + readl(ioaddr + 0x48); /* flush */ } + writel(0, ioaddr + 0x148); + writel(0, ioaddr + 0x1C8); + } + + sil_iowrite8(dev, 0, base ? (base + 0xB4) : 0x80); + sil_iowrite8(dev, 0, base ? (base + 0xF4) : 0x84); + + scsc_addr = base ? (base + 0x4A) : 0x8A; + tmp = sil_ioread8(dev, scsc_addr); + + switch (tmp & 0x30) { + case 0x00: + /* On 100 MHz clocking, try and switch to 133 MHz */ + sil_iowrite8(dev, tmp | 0x10, scsc_addr); + break; + case 0x30: + /* Clocking is disabled, attempt to force 133MHz clocking. */ + sil_iowrite8(dev, tmp & ~0x20, scsc_addr); + case 0x10: + /* On 133Mhz clocking. */ + break; + case 0x20: + /* On PCIx2 clocking. */ + break; } - pci_write_config_byte(dev, 0x80, 0x00); - pci_write_config_byte(dev, 0x84, 0x00); - pci_read_config_byte(dev, 0x8A, &tmpbyte); - switch(tmpbyte & 0x30) { - case 0x00: - /* 133 clock attempt to force it on */ - pci_write_config_byte(dev, 0x8A, tmpbyte|0x10); - case 0x30: - /* if clocking is disabled */ - /* 133 clock attempt to force it on */ - pci_write_config_byte(dev, 0x8A, tmpbyte & ~0x20); - case 0x10: - /* 133 already */ - break; - case 0x20: - /* BIOS set PCI x2 clocking */ - break; + tmp = sil_ioread8(dev, scsc_addr); + + sil_iowrite8 (dev, 0x72, base + 0xA1); + sil_iowrite16(dev, 0x328A, base + 0xA2); + sil_iowrite32(dev, 0x62DD62DD, base + 0xA4); + sil_iowrite32(dev, 0x43924392, base + 0xA8); + sil_iowrite32(dev, 0x40094009, base + 0xAC); + sil_iowrite8 (dev, 0x72, base ? (base + 0xE1) : 0xB1); + sil_iowrite16(dev, 0x328A, base ? (base + 0xE2) : 0xB2); + sil_iowrite32(dev, 0x62DD62DD, base ? (base + 0xE4) : 0xB4); + sil_iowrite32(dev, 0x43924392, base ? (base + 0xE8) : 0xB8); + sil_iowrite32(dev, 0x40094009, base ? (base + 0xEC) : 0xBC); + + if (base && pdev_is_sata(dev)) { + writel(0xFFFF0000, ioaddr + 0x108); + writel(0xFFFF0000, ioaddr + 0x188); + writel(0x00680000, ioaddr + 0x148); + writel(0x00680000, ioaddr + 0x1C8); } - pci_read_config_byte(dev, 0x8A, &tmpbyte); + /* report the clocking mode of the controller */ + if (!pdev_is_sata(dev)) { + static const char *clk_str[] = + { "== 100", "== 133", "== 2X PCI", "DISABLED!" }; - pci_write_config_byte(dev, 0xA1, 0x72); - pci_write_config_word(dev, 0xA2, 0x328A); - pci_write_config_dword(dev, 0xA4, 0x62DD62DD); - pci_write_config_dword(dev, 0xA8, 0x43924392); - pci_write_config_dword(dev, 0xAC, 0x40094009); - pci_write_config_byte(dev, 0xB1, 0x72); - pci_write_config_word(dev, 0xB2, 0x328A); - pci_write_config_dword(dev, 0xB4, 0x62DD62DD); - pci_write_config_dword(dev, 0xB8, 0x43924392); - pci_write_config_dword(dev, 0xBC, 0x40094009); + tmp >>= 4; + printk(KERN_INFO "%s: BASE CLOCK %s\n", name, clk_str[tmp & 3]); + } - proc_reports_siimage(dev, (tmpbyte>>4), name); return 0; } @@ -610,8 +581,7 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const ch * * The basic setup here is fairly simple, we can use standard MMIO * operations. However we do have to set the taskfile register offsets - * by hand as there isnt a standard defined layout for them this - * time. + * by hand as there isn't a standard defined layout for them this time. * * The hardware supports buffered taskfiles and also some rather nice * extended PRD tables. For better SI3112 support use the libata driver @@ -622,23 +592,20 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) struct pci_dev *dev = to_pci_dev(hwif->dev); void *addr = pci_get_drvdata(dev); u8 ch = hwif->channel; - unsigned long base; - struct ide_io_ports *io_ports = &hwif->io_ports; + unsigned long base; /* - * Fill in the basic HWIF bits + * Fill in the basic hwif bits */ - + hwif->host_flags |= IDE_HFLAG_MMIO; default_hwif_mmiops(hwif); - hwif->hwif_data = addr; + hwif->hwif_data = addr; /* - * Now set up the hw. We have to do this ourselves as - * the MMIO layout isnt the same as the standard port - * based I/O + * Now set up the hw. We have to do this ourselves as the + * MMIO layout isn't the same as the standard port based I/O. */ - memset(io_ports, 0, sizeof(*io_ports)); base = (unsigned long)addr; @@ -648,10 +615,9 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) base += 0x80; /* - * The buffered task file doesn't have status/control - * so we can't currently use it sanely since we want to - * use LBA48 mode. - */ + * The buffered task file doesn't have status/control, so we + * can't currently use it sanely since we want to use LBA48 mode. + */ io_ports->data_addr = base; io_ports->error_addr = base + 1; io_ports->nsect_addr = base + 2; @@ -680,19 +646,17 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) static int is_dev_seagate_sata(ide_drive_t *drive) { - const char *s = &drive->id->model[0]; - unsigned len; - - len = strnlen(s, sizeof(drive->id->model)); + const char *s = &drive->id->model[0]; + unsigned len = strnlen(s, sizeof(drive->id->model)); - if ((len > 4) && (!memcmp(s, "ST", 2))) { + if ((len > 4) && (!memcmp(s, "ST", 2))) if ((!memcmp(s + len - 2, "AS", 2)) || (!memcmp(s + len - 3, "ASL", 3))) { printk(KERN_INFO "%s: applying pessimistic Seagate " "errata fix\n", drive->name); return 1; } - } + return 0; } @@ -709,7 +673,7 @@ static void __devinit sil_quirkproc(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - /* Try and raise the rqsize */ + /* Try and rise the rqsize */ if (!is_sata(hwif) || !is_dev_seagate_sata(drive)) hwif->rqsize = 128; } @@ -743,20 +707,14 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif) * sil_cable_detect - cable detection * @hwif: interface to check * - * Check for the presence of an ATA66 capable cable on the - * interface. + * Check for the presence of an ATA66 capable cable on the interface. */ static u8 __devinit sil_cable_detect(ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned long addr = siimage_selreg(hwif, 0); - u8 ata66 = 0; - - if (pci_get_drvdata(dev) == NULL) - pci_read_config_byte(dev, addr, &ata66); - else - ata66 = hwif->INB(addr); + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long addr = siimage_selreg(hwif, 0); + u8 ata66 = sil_ioread8(dev, addr); return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; } @@ -802,15 +760,16 @@ static const struct ide_port_info siimage_chipsets[] __devinitdata = { }; /** - * siimage_init_one - pci layer discovery entry + * siimage_init_one - PCI layer discovery entry * @dev: PCI device * @id: ident table entry * - * Called by the PCI code when it finds an SI680 or SI3112 controller. + * Called by the PCI code when it finds an SiI680 or SiI3112 controller. * We then use the IDE PCI generic helper to do most of the work. */ - -static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id) + +static int __devinit siimage_init_one(struct pci_dev *dev, + const struct pci_device_id *id) { struct ide_port_info d; u8 idx = id->driver_data; diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 3cac6b2790d..48aa019127b 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -941,6 +941,7 @@ static const struct ide_port_info pmac_port_info = { .port_ops = &pmac_ide_port_ops, .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | IDE_HFLAG_POST_SET_MODE | + IDE_HFLAG_MMIO | IDE_HFLAG_UNMASK_IRQS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, |