Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 198 insertions, 0 deletions

diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
new file mode 100644
index 00000000000..8a7117a08cf
--- /dev/null
+++ b/drivers/macintosh/Kconfig
@@ -0,0 +1,198 @@
+
+menu "Macintosh device drivers"
+	depends on PPC || MAC
+
+config ADB
+	bool "Apple Desktop Bus (ADB) support"
+	depends on MAC || PPC_PMAC
+	help
+	  Apple Desktop Bus (ADB) support is for support of devices which
+	  are connected to an ADB port.  ADB devices tend to have 4 pins.
+	  If you have an Apple Macintosh prior to the iMac, an iBook or
+	  PowerBook, or a "Blue and White G3", you probably want to say Y
+	  here.  Otherwise say N.
+
+config ADB_MACII
+	bool "Include Mac II ADB driver"
+	depends on ADB && MAC
+	help
+	  Say Y here if want your kernel to support Macintosh systems that use
+	  the Mac II style ADB.  This includes the II, IIx, IIcx, SE/30, IIci,
+	  Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
+	  Centris 650.
+
+config ADB_MACIISI
+	bool "Include Mac IIsi ADB driver"
+	depends on ADB && MAC
+	help
+	  Say Y here if want your kernel to support Macintosh systems that use
+	  the Mac IIsi style ADB.  This includes the IIsi, IIvi, IIvx, Classic
+	  II, LC, LC II, LC III, Performa 460, and the Performa 600.
+
+config ADB_IOP
+	bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
+	depends on ADB && MAC
+	help
+	  The I/O Processor (IOP) is an Apple custom IC designed to provide
+	  intelligent support for I/O controllers.  It is described at
+	  <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
+	  support for it, say 'Y' here.
+
+config ADB_PMU68K
+	bool "Include PMU (Powerbook) ADB driver"
+	depends on ADB && MAC
+	help
+	  Say Y here if want your kernel to support the m68k based Powerbooks.
+	  This includes the PowerBook 140, PowerBook 145, PowerBook 150,
+	  PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
+	  PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
+	  PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
+	  PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
+
+# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
+config ADB_CUDA
+	bool "Support for CUDA based Macs and PowerMacs"
+	depends on (ADB || PPC_PMAC) && !PPC_PMAC64
+	help
+	  This provides support for CUDA based Macintosh and Power Macintosh
+	  systems.  This includes many m68k based Macs (Color Classic, Mac TV,
+	  Performa 475, Performa 520, Performa 550, Performa 575,
+	  Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
+	  Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
+	  the Blue&White G3 and the "Yikes" G4 (PCI Graphics).  All later
+	  models should use CONFIG_ADB_PMU instead.  It is safe to say Y here
+	  even if your machine doesn't have a CUDA.
+
+	  If unsure say Y.
+
+config ADB_PMU
+	bool "Support for PMU  based PowerMacs"
+	depends on PPC_PMAC
+	help
+	  On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
+	  PMU is an embedded microprocessor whose primary function is to
+	  control system power, and battery charging on the portable models.
+	  The PMU also controls the ADB (Apple Desktop Bus) which connects to
+	  the keyboard and mouse on some machines, as well as the non-volatile
+	  RAM and the RTC (real time clock) chip.  Say Y to enable support for
+	  this device; you should do so if your machine is one of those
+	  mentioned above.
+
+config PMAC_SMU
+	bool "Support for SMU  based PowerMacs"
+	depends on PPC_PMAC64
+	help
+	  This option adds support for the newer G5 iMacs and PowerMacs based
+	  on the "SMU" system control chip which replaces the old PMU.
+	  If you don't know, say Y.
+
+config PMAC_PBOOK
+	bool "Power management support for PowerBooks"
+	depends on ADB_PMU
+	---help---
+	  This provides support for putting a PowerBook to sleep; it also
+	  enables media bay support.  Power management works on the
+	  PB2400/3400/3500, Wallstreet, Lombard, and Bronze PowerBook G3 and
+	  the Titanium Powerbook G4, as well as the iBooks.  You should get
+	  the power management daemon, pmud, to make it work and you must have
+	  the /dev/pmu device (see the pmud README).
+
+	  Get pmud from <ftp://ftp.samba.org/pub/ppclinux/pmud/>.
+
+	  If you have a PowerBook, you should say Y here.
+
+	  You may also want to compile the dma sound driver as a module and
+	  have it autoloaded. The act of removing the module shuts down the
+	  sound hardware for more power savings.
+
+config PM
+	bool
+	depends on PPC_PMAC && ADB_PMU && PMAC_PBOOK
+	default y
+
+config PMAC_APM_EMU
+	tristate "APM emulation"
+	depends on PMAC_PBOOK
+
+# made a separate option since backlight may end up beeing used
+# on non-powerbook machines (but only on PMU based ones AFAIK)
+config PMAC_BACKLIGHT
+	bool "Backlight control for LCD screens"
+	depends on ADB_PMU
+	help
+	  Say Y here to build in code to manage the LCD backlight on a
+	  Macintosh PowerBook.  With this code, the backlight will be turned
+	  on and off appropriately on power-management and lid-open/lid-closed
+	  events; also, the PowerBook button device will be enabled so you can
+	  change the screen brightness.
+
+config MAC_SERIAL
+	tristate "Support for PowerMac serial ports (OBSOLETE DRIVER)"
+	depends on PPC_PMAC && BROKEN
+	help
+	  This driver is obsolete. Use CONFIG_SERIAL_PMACZILOG in
+	  "Character devices --> Serial drivers --> PowerMac z85c30" option.
+
+config ADB_MACIO
+	bool "Include MacIO (CHRP) ADB driver"
+	depends on ADB && PPC_CHRP && !PPC_PMAC64
+	help
+	  Say Y here to include direct support for the ADB controller in the
+	  Hydra chip used on PowerPC Macintoshes of the CHRP type.  (The Hydra
+	  also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
+	  OpenPIC controller and two RS422/Geoports.)
+
+config INPUT_ADBHID
+	bool "Support for ADB input devices (keyboard, mice, ...)"
+	depends on ADB && INPUT=y
+	help
+	  Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
+	  such as keyboards, mice, joysticks, trackpads  or graphic tablets
+	  handled by the input layer.  If you say Y here, make sure to say Y to
+	  the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
+	  "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
+	  support" (CONFIG_INPUT_EVDEV) as well.
+
+	  If unsure, say Y.
+
+config MAC_EMUMOUSEBTN
+	bool "Support for mouse button 2+3 emulation"
+	depends on INPUT_ADBHID
+	help
+	  This provides generic support for emulating the 2nd and 3rd mouse
+	  button with keypresses.  If you say Y here, the emulation is still
+	  disabled by default.  The emulation is controlled by these sysctl
+	  entries:
+	  /proc/sys/dev/mac_hid/mouse_button_emulation
+	  /proc/sys/dev/mac_hid/mouse_button2_keycode
+	  /proc/sys/dev/mac_hid/mouse_button3_keycode
+
+	  If you have an Apple machine with a 1-button mouse, say Y here.
+
+config THERM_WINDTUNNEL
+	tristate "Support for thermal management on Windtunnel G4s"
+	depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+	help
+	  This driver provides some thermostat and fan control for the desktop
+	  G4 "Windtunnel"
+
+config THERM_ADT746X
+	tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
+	depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+	help
+	  This driver provides some thermostat and fan control for the
+          iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
+	  better fan behaviour by default, and some manual control.
+
+config THERM_PM72
+	tristate "Support for thermal management on PowerMac G5"
+	depends on I2C && I2C_KEYWEST && PPC_PMAC64
+	help
+	  This driver provides thermostat and fan control for the desktop
+	  G5 machines. 
+
+config ANSLCD
+	tristate "Support for ANS LCD display"
+	depends on ADB_CUDA && PPC_PMAC
+
+endmenu