V4L/DVB (5311): Tda1004x driver updates

There are the following changes:
- separate configuration of IF and GPIOs.
- set GPIOs before firmware load. This helps to avoid I2C address
  collisions.
- if desired invert GPIOs at sleep (automatic return to analog mode of card).
- added 3 tuner configuration bytes to config stuct.
- added i2c gate address to config struct.
- moved _state struct declaration to header file to make it accessible
  on board layer.
- added "conf_probed" to the state struct to allow i.e. probing for correct
  tuner version.
- changed firmware load mechanism to always:
  + check if already loaded
  + try to boot from eeprom
  + try downlad from host
- corrected name of tda10046 firmware image (backward compatible).

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 45 insertions, 4 deletions

diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h
index ec502d71b83..886db3f75d5 100644
--- a/drivers/media/dvb/frontends/tda1004x.h
+++ b/drivers/media/dvb/frontends/tda1004x.h
@@ -35,9 +35,23 @@ enum tda10046_agc {
 	TDA10046_AGC_DEFAULT,		/* original configuration */
 	TDA10046_AGC_IFO_AUTO_NEG,	/* IF AGC only, automatic, negtive */
 	TDA10046_AGC_IFO_AUTO_POS,	/* IF AGC only, automatic, positive */
-	TDA10046_AGC_TDA827X_GP11,	/* IF AGC only, special setup for tda827x */
-	TDA10046_AGC_TDA827X_GP00,	/* same as above, but GPIOs 0 */
-	TDA10046_AGC_TDA827X_GP01,	/* same as above, but GPIO3=0 GPIO1=1*/
+	TDA10046_AGC_TDA827X,		/* IF AGC only, special setup for tda827x */
+};
+
+/* Many (hybrid) boards use GPIO 1 and 3
+	GPIO1	analog - dvb switch
+	GPIO3	firmware eeprom address switch
+*/
+enum tda10046_gpio {
+	TDA10046_GPTRI  = 0x00,		/* All GPIOs tristate */
+	TDA10046_GP00   = 0x40,		/* GPIO3=0, GPIO1=0 */
+	TDA10046_GP01   = 0x42,		/* GPIO3=0, GPIO1=1 */
+	TDA10046_GP10   = 0x48,		/* GPIO3=1, GPIO1=0 */
+	TDA10046_GP11   = 0x4a,		/* GPIO3=1, GPIO1=1 */
+	TDA10046_GP00_I = 0x80,		/* GPIO3=0, GPIO1=0, invert in sleep mode*/
+	TDA10046_GP01_I = 0x82,		/* GPIO3=0, GPIO1=1, invert in sleep mode */
+	TDA10046_GP10_I = 0x88,		/* GPIO3=1, GPIO1=0, invert in sleep mode */
+	TDA10046_GP11_I = 0x8a,		/* GPIO3=1, GPIO1=1, invert in sleep mode */
 };
 
 enum tda10046_if {
@@ -67,11 +81,38 @@ struct tda1004x_config
 	/* AGC configuration */
 	enum tda10046_agc agc_config;
 
+	/* setting of GPIO1 and 3 */
+	enum tda10046_gpio gpio_config;
+
+	/* slave address and configuration of the tuner */
+	u8 tuner_address;
+	u8 tuner_config;
+	u8 antenna_switch;
+
+	/* if the board uses another I2c Bridge (tda8290), its address */
+	u8 i2c_gate;
+
 	/* request firmware for device */
-	/* set this to NULL if the card has a firmware EEPROM */
 	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
 };
 
+enum tda1004x_demod {
+	TDA1004X_DEMOD_TDA10045,
+	TDA1004X_DEMOD_TDA10046,
+};
+
+struct tda1004x_state {
+	struct i2c_adapter* i2c;
+	const struct tda1004x_config* config;
+	struct dvb_frontend frontend;
+
+	/* this allows to store probed board information */
+	int	conf_probed;
+
+	/* private demod data */
+	enum tda1004x_demod demod_type;
+};
+
 #if defined(CONFIG_DVB_TDA1004X) || (defined(CONFIG_DVB_TDA1004X_MODULE) && defined(MODULE))
 extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
 					    struct i2c_adapter* i2c);