diff options
| author | Devin Heitmueller <dheitmueller@linuxtv.org> | 2009-04-01 00:11:31 -0300 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2009-04-06 21:43:56 -0300 |
| commit | 16af6f5a7fc2c56c4d8246b850b96324be2fec13 (patch) | |
| tree | 90a463eaf04bc98b3f98df8217aeff38800c5196 /drivers/media/video/au0828/au0828-cards.c | |
| parent | 9beb0de9adc789a7da22dac811b03ff342b27b63 (diff) | |
V4L/DVB (11343): au0828: make i2c clock speed per-board configurable
Setup the i2c clock speed to be definable on a per-board basis. This allows
us to explicitly set the clock speed to 30 KHz on the 950q, and also gets rid
of code which sets it on a basis of what chip the i2c master is talking to
at any given time (which could have caused issues because i2c slaves should
never receive commands at a clock higher than their supported clock speed).
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/video/au0828/au0828-cards.c')
| -rw-r--r-- | drivers/media/video/au0828/au0828-cards.c | 11 |
1 files changed, 11 insertions, 0 deletions
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 1aabaa7e55b..abba48b154c 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -46,6 +46,7 @@ struct au0828_board au0828_boards[] = { .name = "Hauppauge HVR850", .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, + .i2c_clk_divider = AU0828_I2C_CLK_30KHZ, .input = { { .type = AU0828_VMUX_TELEVISION, @@ -70,6 +71,13 @@ struct au0828_board au0828_boards[] = { .name = "Hauppauge HVR950Q", .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, + /* The au0828 hardware i2c implementation does not properly + support the xc5000's i2c clock stretching. So we need to + lower the clock frequency enough where the 15us clock + stretch fits inside of a normal clock cycle, or else the + au0828 fails to set the STOP bit. A 30 KHz clock puts the + clock pulse width at 18us */ + .i2c_clk_divider = AU0828_I2C_CLK_30KHZ, .input = { { .type = AU0828_VMUX_TELEVISION, @@ -94,16 +102,19 @@ struct au0828_board au0828_boards[] = { .name = "Hauppauge HVR950Q rev xxF8", .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, + .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, [AU0828_BOARD_DVICO_FUSIONHDTV7] = { .name = "DViCO FusionHDTV USB", .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, + .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, [AU0828_BOARD_HAUPPAUGE_WOODBURY] = { .name = "Hauppauge Woodbury", .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, + .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, }; |