V4L/DVB (11278): bttv: convert to v4l2_subdev since i2c autoprobing will disappear.

Since i2c autoprobing will disappear bttv needs to be converted to use
v4l2_subdev instead.

Without autoprobing the autoload module option has become obsolete. A warning
is generated if it is set, but it is otherwise ignored.

Since the bttv card definitions are of questionable value a new option was
introduced to allow the user to control which audio module is selected:
msp3400, tda7432 or tvaudio (or none at all).

By default bttv will use the card definitions and fallback on tvaudio as the
last resort.

If no audio device was found a warning is printed.

The saa6588 RDS device is now also explicitly probed since it is no longer
possible to autoprobe it. A new saa6588 module option was added to override
the card definition since I suspect more cards have this device than one
would guess from the card definitions.

Note that the probe addresses of the i2c modules are hardcoded in this
driver. Once all v4l drivers are converted to v4l2_subdev this will be
cleaned up. Such data belongs in an i2c driver header.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 152 insertions, 27 deletions

diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 1536ab5a4a8..b9c3ba51fb8 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -96,12 +96,10 @@ static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
+static unsigned int audiodev[BTTV_MAX];
+static unsigned int saa6588[BTTV_MAX];
 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
-#ifdef MODULE
-static unsigned int autoload = 1;
-#else
-static unsigned int autoload;
-#endif
+static unsigned int autoload = UNSET;
 static unsigned int gpiomask = UNSET;
 static unsigned int audioall = UNSET;
 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
@@ -120,6 +118,7 @@ module_param_array(pll,      int, NULL, 0444);
 module_param_array(tuner,    int, NULL, 0444);
 module_param_array(svhs,     int, NULL, 0444);
 module_param_array(remote,   int, NULL, 0444);
+module_param_array(audiodev, int, NULL, 0444);
 module_param_array(audiomux, int, NULL, 0444);
 
 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
@@ -130,7 +129,14 @@ MODULE_PARM_DESC(latency,"pci latency timer");
 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
 MODULE_PARM_DESC(tuner,"specify installed tuner type");
-MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
+MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
+MODULE_PARM_DESC(audiodev, "specify audio device:\n"
+		"\t\t-1 = no audio\n"
+		"\t\t 0 = autodetect (default)\n"
+		"\t\t 1 = msp3400\n"
+		"\t\t 2 = tda7432\n"
+		"\t\t 3 = tvaudio");
+MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
 		" [some VIA/SIS chipsets are known to have problem with overlay]");
 
@@ -3318,6 +3324,17 @@ void __devinit bttv_init_card1(struct bttv *btv)
 /* initialization part two -- after registering i2c bus */
 void __devinit bttv_init_card2(struct bttv *btv)
 {
+	static const unsigned short tvaudio_addrs[] = {
+		I2C_ADDR_TDA8425   >> 1,
+		I2C_ADDR_TEA6300   >> 1,
+		I2C_ADDR_TEA6420   >> 1,
+		I2C_ADDR_TDA9840   >> 1,
+		I2C_ADDR_TDA985x_L >> 1,
+		I2C_ADDR_TDA985x_H >> 1,
+		I2C_ADDR_TDA9874   >> 1,
+		I2C_ADDR_PIC16C54  >> 1,
+		I2C_CLIENT_END
+	};
 	int addr=ADDR_UNSET;
 
 	btv->tuner_type = UNSET;
@@ -3481,6 +3498,12 @@ void __devinit bttv_init_card2(struct bttv *btv)
 		printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
 		       btv->tuner_type);
 
+	if (autoload != UNSET) {
+		printk(KERN_WARNING "bttv%d: the autoload option is obsolete.\n", btv->c.nr);
+		printk(KERN_WARNING "bttv%d: use option msp3400, tda7432 or tvaudio to\n", btv->c.nr);
+		printk(KERN_WARNING "bttv%d: override which audio module should be used.\n", btv->c.nr);
+	}
+
 	if (UNSET == btv->tuner_type)
 		btv->tuner_type = TUNER_ABSENT;
 
@@ -3488,8 +3511,13 @@ void __devinit bttv_init_card2(struct bttv *btv)
 		struct tuner_setup tun_setup;
 
 		/* Load tuner module before issuing tuner config call! */
-		if (autoload)
-			request_module("tuner");
+		if (bttv_tvcards[btv->c.type].has_radio)
+			v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+				"tuner", "tuner", v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+		v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap, "tuner",
+				"tuner", v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+		v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap, "tuner",
+				"tuner", v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
 
 		tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
 		tun_setup.type = btv->tuner_type;
@@ -3498,7 +3526,7 @@ void __devinit bttv_init_card2(struct bttv *btv)
 		if (bttv_tvcards[btv->c.type].has_radio)
 			tun_setup.mode_mask |= T_RADIO;
 
-		bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
+		bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
 	}
 
 	if (btv->tda9887_conf) {
@@ -3507,7 +3535,7 @@ void __devinit bttv_init_card2(struct bttv *btv)
 		tda9887_cfg.tuner = TUNER_TDA9887;
 		tda9887_cfg.priv = &btv->tda9887_conf;
 
-		bttv_call_i2c_clients(btv, TUNER_SET_CONFIG, &tda9887_cfg);
+		bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
 	}
 
 	btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
@@ -3530,31 +3558,127 @@ void __devinit bttv_init_card2(struct bttv *btv)
 	if (bttv_tvcards[btv->c.type].audio_mode_gpio)
 		btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
 
-	if (!autoload)
-		return;
-
 	if (btv->tuner_type == TUNER_ABSENT)
 		return;  /* no tuner or related drivers to load */
 
+	if (btv->has_saa6588 || saa6588[btv->c.nr]) {
+		/* Probe for RDS receiver chip */
+		static const unsigned short addrs[] = {
+			0x20 >> 1,
+			0x22 >> 1,
+			I2C_CLIENT_END
+		};
+		struct v4l2_subdev *sd;
+
+		sd = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+				"saa6588", "saa6588", addrs);
+		btv->has_saa6588 = (sd != NULL);
+	}
+
 	/* try to detect audio/fader chips */
-	if (!bttv_tvcards[btv->c.type].no_msp34xx &&
-	    bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
-		request_module("msp3400");
 
-	if (bttv_tvcards[btv->c.type].msp34xx_alt &&
-	    bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
-		request_module("msp3400");
+	/* First check if the user specified the audio chip via a module
+	   option. */
+
+	switch (audiodev[btv->c.nr]) {
+	case -1:
+		return;	/* do not load any audio module */
+
+	case 0: /* autodetect */
+		break;
+
+	case 1: {
+		/* The user specified that we should probe for msp3400 */
+		static const unsigned short addrs[] = {
+			I2C_ADDR_MSP3400 >> 1,
+			I2C_ADDR_MSP3400_ALT >> 1,
+			I2C_CLIENT_END
+		};
+
+		btv->sd_msp34xx = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+				"msp3400", "msp3400", addrs);
+		if (btv->sd_msp34xx)
+			return;
+		goto no_audio;
+	}
+
+	case 2: {
+		/* The user specified that we should probe for tda7432 */
+		static const unsigned short addrs[] = {
+			I2C_ADDR_TDA7432 >> 1,
+			I2C_CLIENT_END
+		};
+
+		if (v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+				"tda7432", "tda7432", addrs))
+			return;
+		goto no_audio;
+	}
 
-	if (!bttv_tvcards[btv->c.type].no_tda9875 &&
-	    bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
-		request_module("tda9875");
+	case 3: {
+		/* The user specified that we should probe for tvaudio */
+		btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+				"tvaudio", "tvaudio", tvaudio_addrs);
+		if (btv->sd_tvaudio)
+			return;
+		goto no_audio;
+	}
 
-	if (!bttv_tvcards[btv->c.type].no_tda7432 &&
-	    bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
-		request_module("tda7432");
+	default:
+		printk(KERN_WARNING "bttv%d: unknown audiodev value!\n",
+			btv->c.nr);
+		return;
+	}
+
+	/* There were no overrides, so now we try to discover this through the
+	   card definition */
+
+	/* probe for msp3400 first: this driver can detect whether or not
+	   it really is a msp3400, so it will return NULL when the device
+	   found is really something else (e.g. a tea6300). */
+	if (!bttv_tvcards[btv->c.type].no_msp34xx) {
+		static const unsigned short addrs[] = {
+			I2C_ADDR_MSP3400 >> 1,
+			I2C_CLIENT_END
+		};
+
+		btv->sd_msp34xx = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+				"msp3400", "msp3400", addrs);
+	} else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
+		static const unsigned short addrs[] = {
+			I2C_ADDR_MSP3400_ALT >> 1,
+			I2C_CLIENT_END
+		};
+
+		btv->sd_msp34xx = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+				"msp3400", "msp3400", addrs);
+	}
+
+	/* If we found a msp34xx, then we're done. */
+	if (btv->sd_msp34xx)
+		return;
+
+	/* it might also be a tda7432. */
+	if (!bttv_tvcards[btv->c.type].no_tda7432) {
+		static const unsigned short addrs[] = {
+			I2C_ADDR_TDA7432 >> 1,
+			I2C_CLIENT_END
+		};
+
+		if (v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+				"tda7432", "tda7432", addrs))
+			return;
+	}
+
+	/* Now see if we can find one of the tvaudio devices. */
+	btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+			"tvaudio", "tvaudio", tvaudio_addrs);
+	if (btv->sd_tvaudio)
+		return;
 
-	if (bttv_tvcards[btv->c.type].needs_tvaudio)
-		request_module("tvaudio");
+no_audio:
+	printk(KERN_WARNING "bttv%d: audio absent, no audio device found!\n",
+			btv->c.nr);
 }
 
 
@@ -3626,6 +3750,7 @@ static int terratec_active_radio_upgrade(struct bttv *btv)
 		printk("bttv%d: Terratec Active Radio Upgrade found.\n",
 		       btv->c.nr);
 		btv->has_radio    = 1;
+		btv->has_saa6588  = 1;
 		btv->has_matchbox = 1;
 	} else {
 		btv->has_radio    = 0;