Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (425 commits)
  V4L/DVB (11870): gspca - main: VIDIOC_ENUM_FRAMESIZES ioctl added.
  V4L/DVB (12004): poll method lose race condition
  V4L/DVB (11894): flexcop-pci: dmesg visible names broken
  V4L/DVB (11892): Siano: smsendian - declare function as extern
  V4L/DVB (11891): Siano: smscore - bind the GPIO SMS protocol
  V4L/DVB (11890): Siano: smscore - remove redundant code
  V4L/DVB (11889): Siano: smsdvb - add DVB v3 events
  V4L/DVB (11888): Siano: smsusb - remove redundant ifdef
  V4L/DVB (11887): Siano: smscards - add board (target) events
  V4L/DVB (11886): Siano: smscore - fix some new GPIO definitions names
  V4L/DVB (11885): Siano: Add new GPIO management interface
  V4L/DVB (11884): Siano: smssdio - revert to stand alone module
  V4L/DVB (11883): Siano: cards - add two additional (USB) devices
  V4L/DVB (11824): Siano: smsusb - change exit func debug msg
  V4L/DVB (11823): Siano: smsusb - fix typo in module description
  V4L/DVB (11822): Siano: smscore - bug fix at get_device_mode
  V4L/DVB (11821): Siano: smscore - fix isdb-t firmware name
  V4L/DVB (11820): Siano: smscore - fix byte ordering bug
  V4L/DVB (11819): Siano: smscore - fix get_common_buffer bug
  V4L/DVB (11818): Siano: smscards - assign gpio to HPG targets
  ...

1 files changed, 48 insertions, 10 deletions

diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 192b76cdd5d..c8d7ce8fbd3 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -500,18 +500,21 @@ int em28xx_audio_setup(struct em28xx *dev)
 
 	/* See how this device is configured */
 	cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG);
-	if (cfg < 0)
+	em28xx_info("Config register raw data: 0x%02x\n", cfg);
+	if (cfg < 0) {
+		/* Register read error?  */
 		cfg = EM28XX_CHIPCFG_AC97; /* Be conservative */
-	else
-		em28xx_info("Config register raw data: 0x%02x\n", cfg);
-
-	if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
-		    EM28XX_CHIPCFG_I2S_3_SAMPRATES) {
+	} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == 0x00) {
+		/* The device doesn't have vendor audio at all */
+		dev->has_alsa_audio = 0;
+		dev->audio_mode.has_audio = 0;
+		return 0;
+	} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
+		   EM28XX_CHIPCFG_I2S_3_SAMPRATES) {
 		em28xx_info("I2S Audio (3 sample rates)\n");
 		dev->audio_mode.i2s_3rates = 1;
-	}
-	if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
-		    EM28XX_CHIPCFG_I2S_5_SAMPRATES) {
+	} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
+		   EM28XX_CHIPCFG_I2S_5_SAMPRATES) {
 		em28xx_info("I2S Audio (5 sample rates)\n");
 		dev->audio_mode.i2s_5rates = 1;
 	}
@@ -938,7 +941,7 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 	dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs,
 					      GFP_KERNEL);
 	if (!dev->isoc_ctl.transfer_buffer) {
-		em28xx_errdev("cannot allocate memory for usbtransfer\n");
+		em28xx_errdev("cannot allocate memory for usb transfer\n");
 		kfree(dev->isoc_ctl.urb);
 		return -ENOMEM;
 	}
@@ -1012,6 +1015,41 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 }
 EXPORT_SYMBOL_GPL(em28xx_init_isoc);
 
+/* Determine the packet size for the DVB stream for the given device
+   (underlying value programmed into the eeprom) */
+int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev)
+{
+	unsigned int chip_cfg2;
+	unsigned int packet_size = 564;
+
+	if (dev->chip_id == CHIP_ID_EM2874) {
+		/* FIXME - for now assume 564 like it was before, but the
+		   em2874 code should be added to return the proper value... */
+		packet_size = 564;
+	} else {
+		/* TS max packet size stored in bits 1-0 of R01 */
+		chip_cfg2 = em28xx_read_reg(dev, EM28XX_R01_CHIPCFG2);
+		switch (chip_cfg2 & EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK) {
+		case EM28XX_CHIPCFG2_TS_PACKETSIZE_188:
+			packet_size = 188;
+			break;
+		case EM28XX_CHIPCFG2_TS_PACKETSIZE_376:
+			packet_size = 376;
+			break;
+		case EM28XX_CHIPCFG2_TS_PACKETSIZE_564:
+			packet_size = 564;
+			break;
+		case EM28XX_CHIPCFG2_TS_PACKETSIZE_752:
+			packet_size = 752;
+			break;
+		}
+	}
+
+	em28xx_coredbg("dvb max packet size=%d\n", packet_size);
+	return packet_size;
+}
+EXPORT_SYMBOL_GPL(em28xx_isoc_dvb_max_packetsize);
+
 /*
  * em28xx_wake_i2c()
  * configure i2c attached devices