V4L/DVB (5420): Initialize the inputs before registering the devices.

Once the devices have been registered anyone can start changing the inputs or
TV standard before they have been initialized by the driver. This leads to
cases were the input is changed in an udev rule, but after that rule is
triggered the tail-end of the ivtv driver initialization can override
that by selecting the tuner input.
The correct sequence is to first setup the input, initial frequency and TV
standard before finally registering the video devices. This prevents any
udev rules from being triggered prematurely.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 37 insertions, 40 deletions

diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index d00811a820f..c7648e2a3a6 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -1134,46 +1134,6 @@ static int __devinit ivtv_probe(struct pci_dev *dev,
 	if (itv->options.radio > 0)
 		itv->v4l2_cap |= V4L2_CAP_RADIO;
 
-	retval = ivtv_streams_setup(itv);
-	if (retval) {
-		IVTV_ERR("Error %d setting up streams\n", retval);
-		goto free_i2c;
-	}
-
-	/* Start Threads */
-	IVTV_DEBUG_INFO("Starting Threads\n");
-
-	/* Decoder Thread */
-	if (itv->card->v4l2_capabilities & V4L2_CAP_VIDEO_OUTPUT) {
-		ivtv_init_mpeg_decoder(itv);
-	}
-
-	IVTV_DEBUG_IRQ("Masking interrupts\n");
-	/* clear interrupt mask, effectively disabling interrupts */
-	ivtv_set_irq_mask(itv, 0xffffffff);
-
-	/* Register IRQ */
-	retval = request_irq(itv->dev->irq, ivtv_irq_handler,
-			     IRQF_SHARED | IRQF_DISABLED, itv->name, (void *)itv);
-	if (retval) {
-		IVTV_ERR("Failed to register irq %d\n", retval);
-		goto free_streams;
-	}
-
-	/* On a cx23416 this seems to be able to enable DMA to the chip? */
-	if (!itv->has_cx23415)
-		write_reg_sync(0x03, IVTV_REG_DMACONTROL);
-
-	/* Default interrupts enabled. For the PVR350 this includes the
-	   decoder VSYNC interrupt, which is always on. It is not only used
-	   during decoding but also by the OSD.
-	   Some old PVR250 cards had a cx23415, so testing for that is too
-	   general. Instead test if the card has video output capability. */
-	if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)
-		ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT | IVTV_IRQ_DEC_VSYNC);
-	else
-		ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT);
-
 	if (itv->options.tuner > -1) {
 		struct tuner_setup setup;
 
@@ -1212,6 +1172,43 @@ static int __devinit ivtv_probe(struct pci_dev *dev,
 	itv->std_out = itv->std;
 	ivtv_v4l2_ioctls(itv, NULL, VIDIOC_S_STD, &itv->tuner_std);
 	ivtv_v4l2_ioctls(itv, NULL, VIDIOC_S_FREQUENCY, &vf);
+
+	retval = ivtv_streams_setup(itv);
+	if (retval) {
+		IVTV_ERR("Error %d setting up streams\n", retval);
+		goto free_i2c;
+	}
+
+	if (itv->card->v4l2_capabilities & V4L2_CAP_VIDEO_OUTPUT) {
+		ivtv_init_mpeg_decoder(itv);
+	}
+
+	IVTV_DEBUG_IRQ("Masking interrupts\n");
+	/* clear interrupt mask, effectively disabling interrupts */
+	ivtv_set_irq_mask(itv, 0xffffffff);
+
+	/* Register IRQ */
+	retval = request_irq(itv->dev->irq, ivtv_irq_handler,
+			     IRQF_SHARED | IRQF_DISABLED, itv->name, (void *)itv);
+	if (retval) {
+		IVTV_ERR("Failed to register irq %d\n", retval);
+		goto free_streams;
+	}
+
+	/* On a cx23416 this seems to be able to enable DMA to the chip? */
+	if (!itv->has_cx23415)
+		write_reg_sync(0x03, IVTV_REG_DMACONTROL);
+
+	/* Default interrupts enabled. For the PVR350 this includes the
+	   decoder VSYNC interrupt, which is always on. It is not only used
+	   during decoding but also by the OSD.
+	   Some old PVR250 cards had a cx23415, so testing for that is too
+	   general. Instead test if the card has video output capability. */
+	if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)
+		ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT | IVTV_IRQ_DEC_VSYNC);
+	else
+		ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT);
+
 	if (itv->has_cx23415)
 		ivtv_set_osd_alpha(itv);