aboutsummaryrefslogtreecommitdiff
path: root/drivers/media
diff options
context:
space:
mode:
authorAndy Walls <awalls@radix.net>2009-02-08 22:40:04 -0300
committerMauro Carvalho Chehab <mchehab@redhat.com>2009-03-30 12:42:39 -0300
commit812b1f9d54a5f75066f8a5c92166a979c48c98c6 (patch)
treed04cdfdd80d0e2df825dbd22a6130434867233f0 /drivers/media
parent466df46484aced005fa41706f87e18eaa86918ad (diff)
V4L/DVB (10446): cx18: Finally get sliced VBI working - for 525 line 60 Hz systems at least
Sliced VBI, in the manner that ivtv implements it as a separate data stream, now works for 525 line 60 Hz systems like NTSC-M. It may work for 625 line 50 Hz systems, but I have more engineering work to do, to verify it is operating properly. Sliced data insertion into the MPEG PS should be working, but is untested. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media')
-rw-r--r--drivers/media/video/cx18/cx18-av-core.c44
-rw-r--r--drivers/media/video/cx18/cx18-av-core.h19
-rw-r--r--drivers/media/video/cx18/cx18-av-vbi.c10
-rw-r--r--drivers/media/video/cx18/cx18-driver.c4
-rw-r--r--drivers/media/video/cx18/cx18-streams.c19
-rw-r--r--drivers/media/video/cx18/cx18-vbi.c19
6 files changed, 88 insertions, 27 deletions
diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c
index 1d197649446..a3bd2c95f58 100644
--- a/drivers/media/video/cx18/cx18-av-core.c
+++ b/drivers/media/video/cx18/cx18-av-core.c
@@ -172,11 +172,11 @@ static void cx18_av_initialize(struct cx18 *cx)
/*
* Initial VBI setup
* VIP-1.1, 10 bit mode, enable Raw, disable sliced,
- * don't clamp raw samples when codes are in use, 4 byte user D-words,
- * programmed IDID, RP code V bit transition on VBLANK, data during
+ * don't clamp raw samples when codes are in use, 1 byte user D-words,
+ * IDID0 has line #, RP code V bit transition on VBLANK, data during
* blanking intervals
*/
- cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4010252e);
+ cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4013252e);
/* Set the video input.
The setting in MODE_CTRL gets lost when we do the above setup */
@@ -218,6 +218,7 @@ void cx18_av_std_setup(struct cx18 *cx)
cx18_av_write(cx, 0x49f, 0x14);
if (std & V4L2_STD_625_50) {
+ /* FIXME - revisit these for Sliced VBI */
hblank = 132;
hactive = 720;
burst = 93;
@@ -241,13 +242,34 @@ void cx18_av_std_setup(struct cx18 *cx)
sc = 672351;
}
} else {
+ /*
+ * The following relationships of half line counts should hold:
+ * 525 = vsync + vactive + vblank656
+ * 12 = vblank656 - vblank
+ *
+ * vsync: always 6 half-lines of vsync pulses
+ * vactive: half lines of active video
+ * vblank656: half lines, after line 3, of blanked video
+ * vblank: half lines, after line 9, of blanked video
+ *
+ * vblank656 starts counting from the falling edge of the first
+ * vsync pulse (start of line 4)
+ * vblank starts counting from the after the 6 vsync pulses and
+ * 6 equalization pulses (start of line 10)
+ *
+ * For 525 line systems the driver will extract VBI information
+ * from lines 10 through 21. To avoid the EAV RP code from
+ * toggling at the start of hblank at line 22, where sliced VBI
+ * data from line 21 is stuffed, also treat line 22 as blanked.
+ */
+ vblank656 = 38; /* lines 4 through 22 */
+ vblank = 26; /* lines 10 through 22 */
+ vactive = 481; /* lines 23 through 262.5 */
+
hactive = 720;
hblank = 122;
- vactive = 487;
luma_lpf = 1;
uv_lpf = 1;
- vblank = 26;
- vblank656 = 26;
src_decimation = 0x21f;
if (std == V4L2_STD_PAL_60) {
@@ -330,14 +352,14 @@ void cx18_av_std_setup(struct cx18 *cx)
cx18_av_write(cx, 0x47d, 0xff & sc >> 8);
cx18_av_write(cx, 0x47e, 0xff & sc >> 16);
- /* Sets VBI parameters */
if (std & V4L2_STD_625_50) {
- cx18_av_write(cx, 0x47f, 0x01);
- state->vbi_line_offset = 5;
+ state->slicer_line_delay = 1;
+ state->slicer_line_offset = (6 + state->slicer_line_delay - 2);
} else {
- cx18_av_write(cx, 0x47f, 0x00);
- state->vbi_line_offset = 8;
+ state->slicer_line_delay = 0;
+ state->slicer_line_offset = (10 + state->slicer_line_delay - 2);
}
+ cx18_av_write(cx, 0x47f, state->slicer_line_delay);
}
/* ----------------------------------------------------------------------- */
diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h
index cf68a603909..d83760cae54 100644
--- a/drivers/media/video/cx18/cx18-av-core.h
+++ b/drivers/media/video/cx18/cx18-av-core.h
@@ -79,11 +79,28 @@ struct cx18_av_state {
enum cx18_av_audio_input aud_input;
u32 audclk_freq;
int audmode;
- int vbi_line_offset;
int default_volume;
u32 id;
u32 rev;
int is_initialized;
+
+ /*
+ * The VBI slicer starts operating and counting lines, begining at
+ * slicer line count of 1, at D lines after the deassertion of VRESET
+ * This staring field line, S, is 6 or 10 for 625 or 525 line systems.
+ * Sliced ancillary data captured on VBI slicer line M is sent at the
+ * beginning of the next VBI slicer line, VBI slicer line count N = M+1.
+ * Thus when the VBI slicer reports a VBI slicer line number with
+ * ancillary data, the IDID0 byte indicates VBI slicer line N.
+ * The actual field line that the captured data comes from is
+ * L = M+(S+D-1) = N-1+(S+D-1) = N + (S+D-2).
+ *
+ * D is the slicer_line_delay value programmed into register 0x47f.
+ * (S+D-2) is the slicer_line_offset used to convert slicer reported
+ * line counts to actual field lines.
+ */
+ int slicer_line_delay;
+ int slicer_line_offset;
};
diff --git a/drivers/media/video/cx18/cx18-av-vbi.c b/drivers/media/video/cx18/cx18-av-vbi.c
index b5763372a31..43267d1afb9 100644
--- a/drivers/media/video/cx18/cx18-av-vbi.c
+++ b/drivers/media/video/cx18/cx18-av-vbi.c
@@ -182,7 +182,6 @@ int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg)
case VIDIOC_S_FMT:
{
int is_pal = !(state->std & V4L2_STD_525_60);
- int vbi_offset = is_pal ? 1 : 0;
int i, x;
u8 lcr[24];
@@ -199,7 +198,7 @@ int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg)
cx18_av_std_setup(cx);
/* VBI Offset */
- cx18_av_write(cx, 0x47f, vbi_offset);
+ cx18_av_write(cx, 0x47f, state->slicer_line_delay);
cx18_av_write(cx, 0x404, 0x2e);
break;
}
@@ -213,7 +212,7 @@ int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg)
/* Sliced VBI */
cx18_av_write(cx, 0x404, 0x32); /* Ancillary data */
cx18_av_write(cx, 0x406, 0x13);
- cx18_av_write(cx, 0x47f, vbi_offset);
+ cx18_av_write(cx, 0x47f, state->slicer_line_delay);
/* Force impossible lines to 0 */
if (is_pal) {
@@ -261,7 +260,8 @@ int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg)
}
cx18_av_write(cx, 0x43c, 0x16);
- cx18_av_write(cx, 0x474, is_pal ? 0x2a : 0x22);
+ /* FIXME - should match vblank set in cx18_av_std_setup() */
+ cx18_av_write(cx, 0x474, is_pal ? 0x2a : 26);
break;
}
@@ -286,7 +286,7 @@ int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg)
did = anc->did;
sdid = anc->sdid & 0xf;
l = anc->idid[0] & 0x3f;
- l += state->vbi_line_offset;
+ l += state->slicer_line_offset;
p = anc->payload;
/* Decode the SDID set by the slicer */
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 3cf8ddb633b..2a45bbc757e 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -633,7 +633,9 @@ static void __devinit cx18_init_struct2(struct cx18 *cx)
cx->av_state.aud_input = CX18_AV_AUDIO8;
cx->av_state.audclk_freq = 48000;
cx->av_state.audmode = V4L2_TUNER_MODE_LANG1;
- cx->av_state.vbi_line_offset = 8;
+ cx->av_state.slicer_line_delay = 0;
+ cx->av_state.slicer_line_offset =
+ (10 + cx->av_state.slicer_line_delay - 2);
}
static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *pci_dev,
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index a8dcc0f171d..778aa0c0f9b 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -360,9 +360,16 @@ static void cx18_vbi_setup(struct cx18_stream *s)
if (raw) {
lines = cx->vbi.count * 2;
} else {
- lines = cx->is_60hz ? 24 : 38;
- if (cx->is_60hz)
- lines += 2;
+ /*
+ * For 525/60 systems, according to the VIP 2 & BT.656 std:
+ * The EAV RP code's Field bit toggles on line 4, a few lines
+ * after the Vertcal Blank bit has already toggled.
+ * Tell the encoder to capture 21-4+1=18 lines per field,
+ * since we want lines 10 through 21.
+ *
+ * FIXME - revisit for 625/50 systems
+ */
+ lines = cx->is_60hz ? (21 - 4 + 1) * 2 : 38;
}
data[0] = s->handle;
@@ -402,9 +409,13 @@ static void cx18_vbi_setup(struct cx18_stream *s)
*
* Since the V bit is only allowed to toggle in the EAV RP code,
* just before the first active region line, these two
- * are problematic and we have to ignore them:
+ * are problematic:
* 0x90 (Task HorizontalBlank)
* 0xd0 (Task EvenField HorizontalBlank)
+ *
+ * We have set the digitzer to consider the first active line
+ * as part of VerticalBlank as well so we don't have to look for
+ * these problem codes nor lose the last line of sliced data.
*/
data[4] = 0xB0F0B0F0;
/*
diff --git a/drivers/media/video/cx18/cx18-vbi.c b/drivers/media/video/cx18/cx18-vbi.c
index 52082d4a179..8e6f4d4aff9 100644
--- a/drivers/media/video/cx18/cx18-vbi.c
+++ b/drivers/media/video/cx18/cx18-vbi.c
@@ -221,13 +221,22 @@ void cx18_process_vbi_data(struct cx18 *cx, struct cx18_buffer *buf,
pts = (be32_to_cpu(q[0] == 0x3fffffff)) ? be32_to_cpu(q[2]) : 0;
+ /*
+ * For calls to compress_sliced_buf(), ensure there are an integral
+ * number of lines by shifting the real data up over the 12 bytes header
+ * that got stuffed in.
+ * FIXME - there's a smarter way to do this with pointers, but for some
+ * reason I can't get it to work correctly right now.
+ */
+ memcpy(p, &buf->buf[12], size-12);
+
/* first field */
- /* compress_sliced_buf() will skip the 12 bytes of header */
lines = compress_sliced_buf(cx, 0, p, size / 2, sliced_vbi_eav_rp[0]);
- /* second field */
- /* experimentation shows that the second half does not always
- begin at the exact address. So start a bit earlier
- (hence 32). */
+ /*
+ * second field
+ * In case the second half does not always begin at the exact address,
+ * start a bit earlier (hence 32).
+ */
lines = compress_sliced_buf(cx, lines, p + size / 2 - 32,
size / 2 + 32, sliced_vbi_eav_rp[1]);
/* always return at least one empty line */