diff options
| author | Pierre Ossman <drzeus@drzeus.cx> | 2007-02-11 19:57:36 +0100 |
|---|---|---|
| committer | Pierre Ossman <drzeus@drzeus.cx> | 2007-05-01 13:04:17 +0200 |
| commit | 1c6a0718f0bfdab0d9b7da5f7b74f38a0058c03a (patch) | |
| tree | 5e7f2a26d5d1782d87c596b40f874c6c0b8b8e1a /drivers/mmc/imxmmc.h | |
| parent | 98ac2162699f7e9880683cb954891817f20b607c (diff) | |
mmc: Move host and card drivers to subdirs
Clean up the drivers/mmc directory by moving card and host drivers
into subdirectories.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Diffstat (limited to 'drivers/mmc/imxmmc.h')
| -rw-r--r-- | drivers/mmc/imxmmc.h | 67 |
1 files changed, 0 insertions, 67 deletions
diff --git a/drivers/mmc/imxmmc.h b/drivers/mmc/imxmmc.h deleted file mode 100644 index e5339e334db..00000000000 --- a/drivers/mmc/imxmmc.h +++ /dev/null @@ -1,67 +0,0 @@ - -# define __REG16(x) (*((volatile u16 *)IO_ADDRESS(x))) - -#define MMC_STR_STP_CLK __REG16(IMX_MMC_BASE + 0x00) -#define MMC_STATUS __REG16(IMX_MMC_BASE + 0x04) -#define MMC_CLK_RATE __REG16(IMX_MMC_BASE + 0x08) -#define MMC_CMD_DAT_CONT __REG16(IMX_MMC_BASE + 0x0C) -#define MMC_RES_TO __REG16(IMX_MMC_BASE + 0x10) -#define MMC_READ_TO __REG16(IMX_MMC_BASE + 0x14) -#define MMC_BLK_LEN __REG16(IMX_MMC_BASE + 0x18) -#define MMC_NOB __REG16(IMX_MMC_BASE + 0x1C) -#define MMC_REV_NO __REG16(IMX_MMC_BASE + 0x20) -#define MMC_INT_MASK __REG16(IMX_MMC_BASE + 0x24) -#define MMC_CMD __REG16(IMX_MMC_BASE + 0x28) -#define MMC_ARGH __REG16(IMX_MMC_BASE + 0x2C) -#define MMC_ARGL __REG16(IMX_MMC_BASE + 0x30) -#define MMC_RES_FIFO __REG16(IMX_MMC_BASE + 0x34) -#define MMC_BUFFER_ACCESS __REG16(IMX_MMC_BASE + 0x38) -#define MMC_BUFFER_ACCESS_OFS 0x38 - - -#define STR_STP_CLK_ENDIAN (1<<5) -#define STR_STP_CLK_RESET (1<<3) -#define STR_STP_CLK_ENABLE (1<<2) -#define STR_STP_CLK_START_CLK (1<<1) -#define STR_STP_CLK_STOP_CLK (1<<0) -#define STATUS_CARD_PRESENCE (1<<15) -#define STATUS_SDIO_INT_ACTIVE (1<<14) -#define STATUS_END_CMD_RESP (1<<13) -#define STATUS_WRITE_OP_DONE (1<<12) -#define STATUS_DATA_TRANS_DONE (1<<11) -#define STATUS_WR_CRC_ERROR_CODE_MASK (3<<10) -#define STATUS_CARD_BUS_CLK_RUN (1<<8) -#define STATUS_APPL_BUFF_FF (1<<7) -#define STATUS_APPL_BUFF_FE (1<<6) -#define STATUS_RESP_CRC_ERR (1<<5) -#define STATUS_CRC_READ_ERR (1<<3) -#define STATUS_CRC_WRITE_ERR (1<<2) -#define STATUS_TIME_OUT_RESP (1<<1) -#define STATUS_TIME_OUT_READ (1<<0) -#define STATUS_ERR_MASK 0x2f -#define CLK_RATE_PRESCALER(x) ((x) & 0x7) -#define CLK_RATE_CLK_RATE(x) (((x) & 0x7) << 3) -#define CMD_DAT_CONT_CMD_RESP_LONG_OFF (1<<12) -#define CMD_DAT_CONT_STOP_READWAIT (1<<11) -#define CMD_DAT_CONT_START_READWAIT (1<<10) -#define CMD_DAT_CONT_BUS_WIDTH_1 (0<<8) -#define CMD_DAT_CONT_BUS_WIDTH_4 (2<<8) -#define CMD_DAT_CONT_INIT (1<<7) -#define CMD_DAT_CONT_BUSY (1<<6) -#define CMD_DAT_CONT_STREAM_BLOCK (1<<5) -#define CMD_DAT_CONT_WRITE (1<<4) -#define CMD_DAT_CONT_DATA_ENABLE (1<<3) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R1 (1) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R2 (2) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R3 (3) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R4 (4) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R5 (5) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R6 (6) -#define INT_MASK_AUTO_CARD_DETECT (1<<6) -#define INT_MASK_DAT0_EN (1<<5) -#define INT_MASK_SDIO (1<<4) -#define INT_MASK_BUF_READY (1<<3) -#define INT_MASK_END_CMD_RES (1<<2) -#define INT_MASK_WRITE_OP_DONE (1<<1) -#define INT_MASK_DATA_TRAN (1<<0) -#define INT_ALL (0x7f) |