Merge ../linus

Conflicts:

	drivers/char/agp/Kconfig

1 files changed, 53 insertions, 4 deletions

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index cfe288a6e85..3db77eec0ed 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -23,6 +23,14 @@ config MTD_NAND_VERIFY_WRITE
 	  device thinks the write was successful, a bit could have been
 	  flipped accidentaly due to device wear or something else.
 
+config MTD_NAND_ECC_SMC
+	bool "NAND ECC Smart Media byte order"
+	depends on MTD_NAND
+	default n
+	help
+	  Software ECC according to the Smart Media Specification.
+	  The original Linux implementation had byte 0 and 1 swapped.
+
 config MTD_NAND_AUTCPU12
 	tristate "SmartMediaCard on autronix autcpu12 board"
 	depends on MTD_NAND && ARCH_AUTCPU12
@@ -49,12 +57,24 @@ config MTD_NAND_SPIA
 	help
 	  If you had to ask, you don't have one. Say 'N'.
 
+config MTD_NAND_AMS_DELTA
+	tristate "NAND Flash device on Amstrad E3"
+	depends on MACH_AMS_DELTA && MTD_NAND
+	help
+	  Support for NAND flash on Amstrad E3 (Delta).
+
 config MTD_NAND_TOTO
 	tristate "NAND Flash device on TOTO board"
-	depends on ARCH_OMAP && MTD_NAND
+	depends on ARCH_OMAP && MTD_NAND && BROKEN
 	help
 	  Support for NAND flash on Texas Instruments Toto platform.
 
+config MTD_NAND_TS7250
+	tristate "NAND Flash device on TS-7250 board"
+	depends on MACH_TS72XX && MTD_NAND
+	help
+	  Support for NAND flash on Technologic Systems TS-7250 platform.
+
 config MTD_NAND_IDS
 	tristate
 
@@ -76,7 +96,7 @@ config MTD_NAND_RTC_FROM4
 
 config MTD_NAND_PPCHAMELEONEVB
 	tristate "NAND Flash device on PPChameleonEVB board"
-	depends on PPCHAMELEONEVB && MTD_NAND
+	depends on PPCHAMELEONEVB && MTD_NAND && BROKEN
 	help
 	  This enables the NAND flash driver on the PPChameleon EVB Board.
 
@@ -87,7 +107,7 @@ config MTD_NAND_S3C2410
 	  This enables the NAND flash controller on the S3C2410 and S3C2440
 	  SoCs
 
-	  No board specfic support is done by this driver, each board
+	  No board specific support is done by this driver, each board
 	  must advertise a platform_device for the driver to attach.
 
 config MTD_NAND_S3C2410_DEBUG
@@ -109,6 +129,22 @@ config MTD_NAND_S3C2410_HWECC
 	  currently not be able to switch to software, as there is no
 	  implementation for ECC method used by the S3C2410
 
+config MTD_NAND_NDFC
+	tristate "NDFC NanD Flash Controller"
+	depends on MTD_NAND && 44x
+	help
+	 NDFC Nand Flash Controllers are integrated in EP44x SoCs
+
+config MTD_NAND_S3C2410_CLKSTOP
+	bool "S3C2410 NAND IDLE clock stop"
+	depends on MTD_NAND_S3C2410
+	default n
+	help
+	  Stop the clock to the NAND controller when there is no chip
+	  selected to save power. This will mean there is a small delay
+	  when the is NAND chip selected or released, but will save
+	  approximately 5mA of power when there is nothing happening.
+
 config MTD_NAND_DISKONCHIP
 	tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)"
 	depends on MTD_NAND && EXPERIMENTAL
@@ -183,11 +219,24 @@ config MTD_NAND_SHARPSL
 	tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
 	depends on MTD_NAND && ARCH_PXA
 
+config MTD_NAND_CS553X
+	tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
+	depends on MTD_NAND && X86_32 && (X86_PC || X86_GENERICARCH)
+	help
+	  The CS553x companion chips for the AMD Geode processor
+	  include NAND flash controllers with built-in hardware ECC
+	  capabilities; enabling this option will allow you to use
+	  these. The driver will check the MSRs to verify that the
+	  controller is enabled for NAND, and currently requires that
+	  the controller be in MMIO mode.
+
+	  If you say "m", the module will be called "cs553x_nand.ko".
+
 config MTD_NAND_NANDSIM
 	tristate "Support for NAND Flash Simulator"
 	depends on MTD_NAND && MTD_PARTITIONS
 	help
-	  The simulator may simulate verious NAND flash chips for the
+	  The simulator may simulate various NAND flash chips for the
 	  MTD nand layer.
 
 endmenu