Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	include/asm-arm/arch-omap/onenand.h

13 files changed, 582 insertions, 18 deletions

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 572c842e9f4..8eb2b06cf0d 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -345,6 +345,13 @@ config MTD_NAND_PASEMI
 	  Enables support for NAND Flash interface on PA Semi PWRficient
 	  based boards
 
+config MTD_NAND_TMIO
+	tristate "NAND Flash device on Toshiba Mobile IO Controller"
+	depends on MTD_NAND && MFD_TMIO
+	help
+	  Support for NAND flash connected to a Toshiba Mobile IO
+	  Controller in some PDAs, including the Sharp SL6000x.
+
 config MTD_NAND_NANDSIM
 	tristate "Support for NAND Flash Simulator"
 	depends on MTD_PARTITIONS
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index b55e4c69fea..8540c46ffba 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
+obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
 obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
 obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
 obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index a0ba07c36ee..26d42987971 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -22,10 +22,10 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/board-ams-delta.h>
+#include <mach/gpio.h>
+#include <mach/board-ams-delta.h>
 
 /*
  * MTD structure for E3 (Delta)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 99aec46e214..3387e0d5076 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -32,8 +32,8 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
 
 #ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
 #define hard_ecc	1
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index 553dd7e9b41..7c95da1f612 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -32,9 +32,9 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
-#include <asm/arch/autcpu12.h>
+#include <mach/autcpu12.h>
 
 /*
  * MTD structure for AUTCPU12 board
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index fc8529bedfd..9eba3f04783 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -26,8 +26,8 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 
 #define GPIO_NAND_CS	(11)
 #define GPIO_NAND_RB	(89)
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index 387e4352903..86366bfba9f 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -23,7 +23,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>	/* for CLPS7111_VIRT_BASE */
+#include <mach/hardware.h>	/* for CLPS7111_VIRT_BASE */
 #include <asm/sizes.h>
 #include <asm/hardware/clps7111.h>
 
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 9e59de501c2..f8ce79b446e 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -24,10 +24,10 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>	/* for CLPS7111_VIRT_BASE */
+#include <mach/hardware.h>	/* for CLPS7111_VIRT_BASE */
 #include <asm/sizes.h>
-#include <asm/arch/h1900-gpio.h>
-#include <asm/arch/ipaq.h>
+#include <mach/h1900-gpio.h>
+#include <mach/ipaq.h>
 
 /*
  * MTD structure for EDB7312 board
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index ee2ac3948cd..64002488c6e 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -18,7 +18,7 @@
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/plat-orion/orion_nand.h>
 
 #ifdef CONFIG_MTD_CMDLINE_PARTS
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index fe2bc7e4211..a64ad15b8fd 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -22,8 +22,8 @@
 #include <linux/irq.h>
 #include <asm/dma.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa3xx_nand.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa3xx_nand.h>
 
 #define	CHIP_DELAY_TIMEOUT	(2 * HZ/10)
 
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 6dba2fb66ae..30a518e211b 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -21,7 +21,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/interrupt.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static void __iomem *sharpsl_io_base;
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
new file mode 100644
index 00000000000..cbab654b03c
--- /dev/null
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -0,0 +1,556 @@
+/*
+ * Toshiba TMIO NAND flash controller driver
+ *
+ * Slightly murky pre-git history of the driver:
+ *
+ * Copyright (c) Ian Molton 2004, 2005, 2008
+ *    Original work, independant of sharps code. Included hardware ECC support.
+ *    Hard ECC did not work for writes in the early revisions.
+ * Copyright (c) Dirk Opfer 2005.
+ *    Modifications developed from sharps code but
+ *    NOT containing any, ported onto Ians base.
+ * Copyright (c) Chris Humbert 2005
+ * Copyright (c) Dmitry Baryshkov 2008
+ *    Minor fixes
+ *
+ * Parts copyright Sebastian Carlier
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * NAND Flash Host Controller Configuration Register
+ */
+#define CCR_COMMAND	0x04	/* w Command				*/
+#define CCR_BASE	0x10	/* l NAND Flash Control Reg Base Addr	*/
+#define CCR_INTP	0x3d	/* b Interrupt Pin			*/
+#define CCR_INTE	0x48	/* b Interrupt Enable			*/
+#define CCR_EC		0x4a	/* b Event Control			*/
+#define CCR_ICC		0x4c	/* b Internal Clock Control		*/
+#define CCR_ECCC	0x5b	/* b ECC Control			*/
+#define CCR_NFTC	0x60	/* b NAND Flash Transaction Control	*/
+#define CCR_NFM		0x61	/* b NAND Flash Monitor			*/
+#define CCR_NFPSC	0x62	/* b NAND Flash Power Supply Control	*/
+#define CCR_NFDC	0x63	/* b NAND Flash Detect Control		*/
+
+/*
+ * NAND Flash Control Register
+ */
+#define FCR_DATA	0x00	/* bwl Data Register			*/
+#define FCR_MODE	0x04	/* b Mode Register			*/
+#define FCR_STATUS	0x05	/* b Status Register			*/
+#define FCR_ISR		0x06	/* b Interrupt Status Register		*/
+#define FCR_IMR		0x07	/* b Interrupt Mask Register		*/
+
+/* FCR_MODE Register Command List */
+#define FCR_MODE_DATA	0x94	/* Data Data_Mode */
+#define FCR_MODE_COMMAND 0x95	/* Data Command_Mode */
+#define FCR_MODE_ADDRESS 0x96	/* Data Address_Mode */
+
+#define FCR_MODE_HWECC_CALC	0xB4	/* HW-ECC Data */
+#define FCR_MODE_HWECC_RESULT	0xD4	/* HW-ECC Calc result Read_Mode */
+#define FCR_MODE_HWECC_RESET	0xF4	/* HW-ECC Reset */
+
+#define FCR_MODE_POWER_ON	0x0C	/* Power Supply ON  to SSFDC card */
+#define FCR_MODE_POWER_OFF	0x08	/* Power Supply OFF to SSFDC card */
+
+#define FCR_MODE_LED_OFF	0x00	/* LED OFF */
+#define FCR_MODE_LED_ON		0x04	/* LED ON */
+
+#define FCR_MODE_EJECT_ON	0x68	/* Ejection events active  */
+#define FCR_MODE_EJECT_OFF	0x08	/* Ejection events ignored */
+
+#define FCR_MODE_LOCK		0x6C	/* Lock_Mode. Eject Switch Invalid */
+#define FCR_MODE_UNLOCK		0x0C	/* UnLock_Mode. Eject Switch is valid */
+
+#define FCR_MODE_CONTROLLER_ID	0x40	/* Controller ID Read */
+#define FCR_MODE_STANDBY	0x00	/* SSFDC card Changes Standby State */
+
+#define FCR_MODE_WE		0x80
+#define FCR_MODE_ECC1		0x40
+#define FCR_MODE_ECC0		0x20
+#define FCR_MODE_CE		0x10
+#define FCR_MODE_PCNT1		0x08
+#define FCR_MODE_PCNT0		0x04
+#define FCR_MODE_ALE		0x02
+#define FCR_MODE_CLE		0x01
+
+#define FCR_STATUS_BUSY		0x80
+
+/*--------------------------------------------------------------------------*/
+
+struct tmio_nand {
+	struct mtd_info mtd;
+	struct nand_chip chip;
+
+	struct platform_device *dev;
+
+	void __iomem *ccr;
+	void __iomem *fcr;
+	unsigned long fcr_phys;
+
+	unsigned int irq;
+
+	/* for tmio_nand_read_byte */
+	u8			read;
+	unsigned read_good:1;
+};
+
+#define mtd_to_tmio(m)			container_of(m, struct tmio_nand, mtd)
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+static const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+static void tmio_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+				   unsigned int ctrl)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	struct nand_chip *chip = mtd->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		u8 mode;
+
+		if (ctrl & NAND_NCE) {
+			mode = FCR_MODE_DATA;
+
+			if (ctrl & NAND_CLE)
+				mode |=  FCR_MODE_CLE;
+			else
+				mode &= ~FCR_MODE_CLE;
+
+			if (ctrl & NAND_ALE)
+				mode |=  FCR_MODE_ALE;
+			else
+				mode &= ~FCR_MODE_ALE;
+		} else {
+			mode = FCR_MODE_STANDBY;
+		}
+
+		tmio_iowrite8(mode, tmio->fcr + FCR_MODE);
+		tmio->read_good = 0;
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		tmio_iowrite8(cmd, chip->IO_ADDR_W);
+}
+
+static int tmio_nand_dev_ready(struct mtd_info *mtd)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	return !(tmio_ioread8(tmio->fcr + FCR_STATUS) & FCR_STATUS_BUSY);
+}
+
+static irqreturn_t tmio_irq(int irq, void *__tmio)
+{
+	struct tmio_nand *tmio = __tmio;
+	struct nand_chip *nand_chip = &tmio->chip;
+
+	/* disable RDYREQ interrupt */
+	tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+
+	if (unlikely(!waitqueue_active(&nand_chip->controller->wq)))
+		dev_warn(&tmio->dev->dev, "spurious interrupt\n");
+
+	wake_up(&nand_chip->controller->wq);
+	return IRQ_HANDLED;
+}
+
+/*
+  *The TMIO core has a RDYREQ interrupt on the posedge of #SMRB.
+  *This interrupt is normally disabled, but for long operations like
+  *erase and write, we enable it to wake us up.  The irq handler
+  *disables the interrupt.
+ */
+static int
+tmio_nand_wait(struct mtd_info *mtd, struct nand_chip *nand_chip)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	long timeout;
+
+	/* enable RDYREQ interrupt */
+	tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR);
+	tmio_iowrite8(0x81, tmio->fcr + FCR_IMR);
+
+	timeout = wait_event_timeout(nand_chip->controller->wq,
+		tmio_nand_dev_ready(mtd),
+		msecs_to_jiffies(nand_chip->state == FL_ERASING ? 400 : 20));
+
+	if (unlikely(!tmio_nand_dev_ready(mtd))) {
+		tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+		dev_warn(&tmio->dev->dev, "still busy with %s after %d ms\n",
+			nand_chip->state == FL_ERASING ? "erase" : "program",
+			nand_chip->state == FL_ERASING ? 400 : 20);
+
+	} else if (unlikely(!timeout)) {
+		tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+		dev_warn(&tmio->dev->dev, "timeout waiting for interrupt\n");
+	}
+
+	nand_chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+	return nand_chip->read_byte(mtd);
+}
+
+/*
+  *The TMIO controller combines two 8-bit data bytes into one 16-bit
+  *word. This function separates them so nand_base.c works as expected,
+  *especially its NAND_CMD_READID routines.
+ *
+  *To prevent stale data from being read, tmio_nand_hwcontrol() clears
+  *tmio->read_good.
+ */
+static u_char tmio_nand_read_byte(struct mtd_info *mtd)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	unsigned int data;
+
+	if (tmio->read_good--)
+		return tmio->read;
+
+	data = tmio_ioread16(tmio->fcr + FCR_DATA);
+	tmio->read = data >> 8;
+	return data;
+}
+
+/*
+  *The TMIO controller converts an 8-bit NAND interface to a 16-bit
+  *bus interface, so all data reads and writes must be 16-bit wide.
+  *Thus, we implement 16-bit versions of the read, write, and verify
+  *buffer functions.
+ */
+static void
+tmio_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	tmio_iowrite16_rep(tmio->fcr + FCR_DATA, buf, len >> 1);
+}
+
+static void tmio_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	tmio_ioread16_rep(tmio->fcr + FCR_DATA, buf, len >> 1);
+}
+
+static int
+tmio_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	u16				*p = (u16 *) buf;
+
+	for (len >>= 1; len; len--)
+		if (*(p++) != tmio_ioread16(tmio->fcr + FCR_DATA))
+			return -EFAULT;
+	return 0;
+}
+
+static void tmio_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	tmio_iowrite8(FCR_MODE_HWECC_RESET, tmio->fcr + FCR_MODE);
+	tmio_ioread8(tmio->fcr + FCR_DATA);	/* dummy read */
+	tmio_iowrite8(FCR_MODE_HWECC_CALC, tmio->fcr + FCR_MODE);
+}
+
+static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+							u_char *ecc_code)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	unsigned int ecc;
+
+	tmio_iowrite8(FCR_MODE_HWECC_RESULT, tmio->fcr + FCR_MODE);
+
+	ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+	ecc_code[1] = ecc;	/* 000-255 LP7-0 */
+	ecc_code[0] = ecc >> 8;	/* 000-255 LP15-8 */
+	ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+	ecc_code[2] = ecc;	/* 000-255 CP5-0,11b */
+	ecc_code[4] = ecc >> 8;	/* 256-511 LP7-0 */
+	ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+	ecc_code[3] = ecc;	/* 256-511 LP15-8 */
+	ecc_code[5] = ecc >> 8;	/* 256-511 CP5-0,11b */
+
+	tmio_iowrite8(FCR_MODE_DATA, tmio->fcr + FCR_MODE);
+	return 0;
+}
+
+static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+	int ret;
+
+	if (cell->enable) {
+		ret = cell->enable(dev);
+		if (ret)
+			return ret;
+	}
+
+	/* (4Ch) CLKRUN Enable    1st spcrunc */
+	tmio_iowrite8(0x81, tmio->ccr + CCR_ICC);
+
+	/* (10h)BaseAddress    0x1000 spba.spba2 */
+	tmio_iowrite16(tmio->fcr_phys, tmio->ccr + CCR_BASE);
+	tmio_iowrite16(tmio->fcr_phys >> 16, tmio->ccr + CCR_BASE + 16);
+
+	/* (04h)Command Register I/O spcmd */
+	tmio_iowrite8(0x02, tmio->ccr + CCR_COMMAND);
+
+	/* (62h) Power Supply Control ssmpwc */
+	/* HardPowerOFF - SuspendOFF - PowerSupplyWait_4MS */
+	tmio_iowrite8(0x02, tmio->ccr + CCR_NFPSC);
+
+	/* (63h) Detect Control ssmdtc */
+	tmio_iowrite8(0x02, tmio->ccr + CCR_NFDC);
+
+	/* Interrupt status register clear sintst */
+	tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR);
+
+	/* After power supply, Media are reset smode */
+	tmio_iowrite8(FCR_MODE_POWER_ON, tmio->fcr + FCR_MODE);
+	tmio_iowrite8(FCR_MODE_COMMAND, tmio->fcr + FCR_MODE);
+	tmio_iowrite8(NAND_CMD_RESET, tmio->fcr + FCR_DATA);
+
+	/* Standby Mode smode */
+	tmio_iowrite8(FCR_MODE_STANDBY, tmio->fcr + FCR_MODE);
+
+	mdelay(5);
+
+	return 0;
+}
+
+static void tmio_hw_stop(struct platform_device *dev, struct tmio_nand *tmio)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+
+	tmio_iowrite8(FCR_MODE_POWER_OFF, tmio->fcr + FCR_MODE);
+	if (cell->disable)
+		cell->disable(dev);
+}
+
+static int tmio_probe(struct platform_device *dev)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct tmio_nand_data *data = cell->driver_data;
+	struct resource *fcr = platform_get_resource(dev,
+			IORESOURCE_MEM, 0);
+	struct resource *ccr = platform_get_resource(dev,
+			IORESOURCE_MEM, 1);
+	int irq = platform_get_irq(dev, 0);
+	struct tmio_nand *tmio;
+	struct mtd_info *mtd;
+	struct nand_chip *nand_chip;
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *parts;
+	int nbparts = 0;
+#endif
+	int retval;
+
+	if (data == NULL)
+		dev_warn(&dev->dev, "NULL platform data!\n");
+
+	tmio = kzalloc(sizeof *tmio, GFP_KERNEL);
+	if (!tmio) {
+		retval = -ENOMEM;
+		goto err_kzalloc;
+	}
+
+	tmio->dev = dev;
+
+	platform_set_drvdata(dev, tmio);
+	mtd = &tmio->mtd;
+	nand_chip = &tmio->chip;
+	mtd->priv = nand_chip;
+	mtd->name = "tmio-nand";
+
+	tmio->ccr = ioremap(ccr->start, ccr->end - ccr->start + 1);
+	if (!tmio->ccr) {
+		retval = -EIO;
+		goto err_iomap_ccr;
+	}
+
+	tmio->fcr_phys = (unsigned long)fcr->start;
+	tmio->fcr = ioremap(fcr->start, fcr->end - fcr->start + 1);
+	if (!tmio->fcr) {
+		retval = -EIO;
+		goto err_iomap_fcr;
+	}
+
+	retval = tmio_hw_init(dev, tmio);
+	if (retval)
+		goto err_hwinit;
+
+	/* Set address of NAND IO lines */
+	nand_chip->IO_ADDR_R = tmio->fcr;
+	nand_chip->IO_ADDR_W = tmio->fcr;
+
+	/* Set address of hardware control function */
+	nand_chip->cmd_ctrl = tmio_nand_hwcontrol;
+	nand_chip->dev_ready = tmio_nand_dev_ready;
+	nand_chip->read_byte = tmio_nand_read_byte;
+	nand_chip->write_buf = tmio_nand_write_buf;
+	nand_chip->read_buf = tmio_nand_read_buf;
+	nand_chip->verify_buf = tmio_nand_verify_buf;
+
+	/* set eccmode using hardware ECC */
+	nand_chip->ecc.mode = NAND_ECC_HW;
+	nand_chip->ecc.size = 512;
+	nand_chip->ecc.bytes = 6;
+	nand_chip->ecc.hwctl = tmio_nand_enable_hwecc;
+	nand_chip->ecc.calculate = tmio_nand_calculate_ecc;
+	nand_chip->ecc.correct = nand_correct_data;
+
+	if (data)
+		nand_chip->badblock_pattern = data->badblock_pattern;
+
+	/* 15 us command delay time */
+	nand_chip->chip_delay = 15;
+
+	retval = request_irq(irq, &tmio_irq,
+				IRQF_DISABLED, dev->dev.bus_id, tmio);
+	if (retval) {
+		dev_err(&dev->dev, "request_irq error %d\n", retval);
+		goto err_irq;
+	}
+
+	tmio->irq = irq;
+	nand_chip->waitfunc = tmio_nand_wait;
+
+	/* Scan to find existence of the device */
+	if (nand_scan(mtd, 1)) {
+		retval = -ENODEV;
+		goto err_scan;
+	}
+	/* Register the partitions */
+#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	nbparts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
+#endif
+	if (nbparts <= 0 && data) {
+		parts = data->partition;
+		nbparts = data->num_partitions;
+	}
+
+	if (nbparts)
+		retval = add_mtd_partitions(mtd, parts, nbparts);
+	else
+#endif
+	retval = add_mtd_device(mtd);
+
+	if (!retval)
+		return retval;
+
+	nand_release(mtd);
+
+err_scan:
+	if (tmio->irq)
+		free_irq(tmio->irq, tmio);
+err_irq:
+	tmio_hw_stop(dev, tmio);
+err_hwinit:
+	iounmap(tmio->fcr);
+err_iomap_fcr:
+	iounmap(tmio->ccr);
+err_iomap_ccr:
+	kfree(tmio);
+err_kzalloc:
+	return retval;
+}
+
+static int tmio_remove(struct platform_device *dev)
+{
+	struct tmio_nand *tmio = platform_get_drvdata(dev);
+
+	nand_release(&tmio->mtd);
+	if (tmio->irq)
+		free_irq(tmio->irq, tmio);
+	tmio_hw_stop(dev, tmio);
+	iounmap(tmio->fcr);
+	iounmap(tmio->ccr);
+	kfree(tmio);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int tmio_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+
+	if (cell->suspend)
+		cell->suspend(dev);
+
+	tmio_hw_stop(dev, platform_get_drvdata(dev));
+	return 0;
+}
+
+static int tmio_resume(struct platform_device *dev)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+
+	/* FIXME - is this required or merely another attack of the broken
+	 * SHARP platform? Looks suspicious.
+	 */
+	tmio_hw_init(dev, platform_get_drvdata(dev));
+
+	if (cell->resume)
+		cell->resume(dev);
+
+	return 0;
+}
+#else
+#define tmio_suspend NULL
+#define tmio_resume NULL
+#endif
+
+static struct platform_driver tmio_driver = {
+	.driver.name	= "tmio-nand",
+	.driver.owner	= THIS_MODULE,
+	.probe		= tmio_probe,
+	.remove		= tmio_remove,
+	.suspend	= tmio_suspend,
+	.resume		= tmio_resume,
+};
+
+static int __init tmio_init(void)
+{
+	return platform_driver_register(&tmio_driver);
+}
+
+static void __exit tmio_exit(void)
+{
+	platform_driver_unregister(&tmio_driver);
+}
+
+module_init(tmio_init);
+module_exit(tmio_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ian Molton, Dirk Opfer, Chris Humbert, Dmitry Baryshkov");
+MODULE_DESCRIPTION("NAND flash driver on Toshiba Mobile IO controller");
+MODULE_ALIAS("platform:tmio-nand");
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
index 807a72752ee..2c410a01131 100644
--- a/drivers/mtd/nand/ts7250.c
+++ b/drivers/mtd/nand/ts7250.c
@@ -25,7 +25,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>