Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (63 commits)
  mtd: OneNAND: Allow setting of boundary information when built as module
  jffs2: leaking jffs2_summary in function jffs2_scan_medium
  mtd: nand: Fix memory leak on txx9ndfmc probe failure.
  mtd: orion_nand: use burst reads with double word accesses
  mtd/nand: s3c6400 support for s3c2410 driver
  [MTD] [NAND] S3C2410: Use DIV_ROUND_UP
  [MTD] [NAND] S3C2410: Deal with unaligned lengths in S3C2440 buffer read/write
  [MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NAND
  [MTD] [NAND] S3C2410: Added a kerneldoc for s3c2410_nand_set
  mtd: physmap_of: Add multiple regions and concatenation support
  mtd: nand: max_retries off by one in mxc_nand
  mtd: nand: s3c2410_nand_setrate(): use correct macros for 2412/2440
  mtd: onenand: add bbt_wait & unlock_all as replaceable for some platform
  mtd: Flex-OneNAND support
  mtd: nand: add OMAP2/OMAP3 NAND driver
  mtd: maps: Blackfin async: fix memory leaks in probe/remove funcs
  mtd: uclinux: mark local stuff static
  mtd: uclinux: do not allow to be built as a module
  mtd: uclinux: allow systems to override map addr/size
  mtd: blackfin NFC: fix hang when using NAND on BF527-EZKITs
  ...

13 files changed, 1406 insertions, 164 deletions

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index f3276897859..ce96c091f01 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -74,6 +74,12 @@ config MTD_NAND_AMS_DELTA
 	help
 	  Support for NAND flash on Amstrad E3 (Delta).
 
+config MTD_NAND_OMAP2
+	tristate "NAND Flash device on OMAP2 and OMAP3"
+	depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
+	help
+          Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
+
 config MTD_NAND_TS7250
 	tristate "NAND Flash device on TS-7250 board"
 	depends on MACH_TS72XX
@@ -139,27 +145,27 @@ config MTD_NAND_PPCHAMELEONEVB
 	  This enables the NAND flash driver on the PPChameleon EVB Board.
 
 config MTD_NAND_S3C2410
-	tristate "NAND Flash support for S3C2410/S3C2440 SoC"
-	depends on ARCH_S3C2410
+	tristate "NAND Flash support for Samsung S3C SoCs"
+	depends on ARCH_S3C2410 || ARCH_S3C64XX
 	help
-	  This enables the NAND flash controller on the S3C2410 and S3C2440
+	  This enables the NAND flash controller on the S3C24xx and S3C64xx
 	  SoCs
 
 	  No board specific support is done by this driver, each board
 	  must advertise a platform_device for the driver to attach.
 
 config MTD_NAND_S3C2410_DEBUG
-	bool "S3C2410 NAND driver debug"
+	bool "Samsung S3C NAND driver debug"
 	depends on MTD_NAND_S3C2410
 	help
-	  Enable debugging of the S3C2410 NAND driver
+	  Enable debugging of the S3C NAND driver
 
 config MTD_NAND_S3C2410_HWECC
-	bool "S3C2410 NAND Hardware ECC"
+	bool "Samsung S3C NAND Hardware ECC"
 	depends on MTD_NAND_S3C2410
 	help
-	  Enable the use of the S3C2410's internal ECC generator when
-	  using NAND. Early versions of the chip have had problems with
+	  Enable the use of the controller's internal ECC generator when
+	  using NAND. Early versions of the chips have had problems with
 	  incorrect ECC generation, and if using these, the default of
 	  software ECC is preferable.
 
@@ -171,7 +177,7 @@ config MTD_NAND_NDFC
 	 NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
 
 config MTD_NAND_S3C2410_CLKSTOP
-	bool "S3C2410 NAND IDLE clock stop"
+	bool "Samsung S3C NAND IDLE clock stop"
 	depends on MTD_NAND_S3C2410
 	default n
 	help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index d33860ac42c..f3a786b3cff 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
 obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
 obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
 obj-$(CONFIG_MTD_NAND_GPIO)		+= gpio.o
+obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 47a33cec379..2802992b39d 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -24,6 +24,7 @@
 
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -47,6 +48,9 @@
 #define no_ecc		0
 #endif
 
+static int on_flash_bbt = 0;
+module_param(on_flash_bbt, int, 0);
+
 /* Register access macros */
 #define ecc_readl(add, reg)				\
 	__raw_readl(add + ATMEL_ECC_##reg)
@@ -459,12 +463,17 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 
 	if (host->board->det_pin) {
 		if (gpio_get_value(host->board->det_pin)) {
-			printk("No SmartMedia card inserted.\n");
+			printk(KERN_INFO "No SmartMedia card inserted.\n");
 			res = ENXIO;
 			goto err_no_card;
 		}
 	}
 
+	if (on_flash_bbt) {
+		printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
+		nand_chip->options |= NAND_USE_FLASH_BBT;
+	}
+
 	/* first scan to find the device and get the page size */
 	if (nand_scan_ident(mtd, 1)) {
 		res = -ENXIO;
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 4c2a67ca801..8506e7e606f 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -458,7 +458,7 @@ static irqreturn_t bf5xx_nand_dma_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int bf5xx_nand_dma_rw(struct mtd_info *mtd,
+static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
 				uint8_t *buf, int is_read)
 {
 	struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
@@ -496,11 +496,20 @@ static int bf5xx_nand_dma_rw(struct mtd_info *mtd,
 	/* setup DMA register with Blackfin DMA API */
 	set_dma_config(CH_NFC, 0x0);
 	set_dma_start_addr(CH_NFC, (unsigned long) buf);
+
+/* The DMAs have different size on BF52x and BF54x */
+#ifdef CONFIG_BF52x
+	set_dma_x_count(CH_NFC, (page_size >> 1));
+	set_dma_x_modify(CH_NFC, 2);
+	val = DI_EN | WDSIZE_16;
+#endif
+
+#ifdef CONFIG_BF54x
 	set_dma_x_count(CH_NFC, (page_size >> 2));
 	set_dma_x_modify(CH_NFC, 4);
-
-	/* setup write or read operation */
 	val = DI_EN | WDSIZE_32;
+#endif
+	/* setup write or read operation */
 	if (is_read)
 		val |= WNR;
 	set_dma_config(CH_NFC, val);
@@ -512,8 +521,6 @@ static int bf5xx_nand_dma_rw(struct mtd_info *mtd,
 	else
 		bfin_write_NFC_PGCTL(0x2);
 	wait_for_completion(&info->dma_completion);
-
-	return 0;
 }
 
 static void bf5xx_nand_dma_read_buf(struct mtd_info *mtd,
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 02700f769b8..0fad6487e6f 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -44,7 +44,7 @@
  * and some flavors of secondary chipselect (e.g. based on A12) as used
  * with multichip packages.
  *
- * The 1-bit ECC hardware is supported, but not yet the newer 4-bit ECC
+ * The 1-bit ECC hardware is supported, as well as the newer 4-bit ECC
  * available on chips like the DM355 and OMAP-L137 and needed with the
  * more error-prone MLC NAND chips.
  *
@@ -54,11 +54,14 @@
 struct davinci_nand_info {
 	struct mtd_info		mtd;
 	struct nand_chip	chip;
+	struct nand_ecclayout	ecclayout;
 
 	struct device		*dev;
 	struct clk		*clk;
 	bool			partitioned;
 
+	bool			is_readmode;
+
 	void __iomem		*base;
 	void __iomem		*vaddr;
 
@@ -73,6 +76,7 @@ struct davinci_nand_info {
 };
 
 static DEFINE_SPINLOCK(davinci_nand_lock);
+static bool ecc4_busy;
 
 #define to_davinci_nand(m) container_of(m, struct davinci_nand_info, mtd)
 
@@ -218,6 +222,192 @@ static int nand_davinci_correct_1bit(struct mtd_info *mtd, u_char *dat,
 /*----------------------------------------------------------------------*/
 
 /*
+ * 4-bit hardware ECC ... context maintained over entire AEMIF
+ *
+ * This is a syndrome engine, but we avoid NAND_ECC_HW_SYNDROME
+ * since that forces use of a problematic "infix OOB" layout.
+ * Among other things, it trashes manufacturer bad block markers.
+ * Also, and specific to this hardware, it ECC-protects the "prepad"
+ * in the OOB ... while having ECC protection for parts of OOB would
+ * seem useful, the current MTD stack sometimes wants to update the
+ * OOB without recomputing ECC.
+ */
+
+static void nand_davinci_hwctl_4bit(struct mtd_info *mtd, int mode)
+{
+	struct davinci_nand_info *info = to_davinci_nand(mtd);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&davinci_nand_lock, flags);
+
+	/* Start 4-bit ECC calculation for read/write */
+	val = davinci_nand_readl(info, NANDFCR_OFFSET);
+	val &= ~(0x03 << 4);
+	val |= (info->core_chipsel << 4) | BIT(12);
+	davinci_nand_writel(info, NANDFCR_OFFSET, val);
+
+	info->is_readmode = (mode == NAND_ECC_READ);
+
+	spin_unlock_irqrestore(&davinci_nand_lock, flags);
+}
+
+/* Read raw ECC code after writing to NAND. */
+static void
+nand_davinci_readecc_4bit(struct davinci_nand_info *info, u32 code[4])
+{
+	const u32 mask = 0x03ff03ff;
+
+	code[0] = davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET) & mask;
+	code[1] = davinci_nand_readl(info, NAND_4BIT_ECC2_OFFSET) & mask;
+	code[2] = davinci_nand_readl(info, NAND_4BIT_ECC3_OFFSET) & mask;
+	code[3] = davinci_nand_readl(info, NAND_4BIT_ECC4_OFFSET) & mask;
+}
+
+/* Terminate read ECC; or return ECC (as bytes) of data written to NAND. */
+static int nand_davinci_calculate_4bit(struct mtd_info *mtd,
+		const u_char *dat, u_char *ecc_code)
+{
+	struct davinci_nand_info *info = to_davinci_nand(mtd);
+	u32 raw_ecc[4], *p;
+	unsigned i;
+
+	/* After a read, terminate ECC calculation by a dummy read
+	 * of some 4-bit ECC register.  ECC covers everything that
+	 * was read; correct() just uses the hardware state, so
+	 * ecc_code is not needed.
+	 */
+	if (info->is_readmode) {
+		davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET);
+		return 0;
+	}
+
+	/* Pack eight raw 10-bit ecc values into ten bytes, making
+	 * two passes which each convert four values (in upper and
+	 * lower halves of two 32-bit words) into five bytes.  The
+	 * ROM boot loader uses this same packing scheme.
+	 */
+	nand_davinci_readecc_4bit(info, raw_ecc);
+	for (i = 0, p = raw_ecc; i < 2; i++, p += 2) {
+		*ecc_code++ =   p[0]        & 0xff;
+		*ecc_code++ = ((p[0] >>  8) & 0x03) | ((p[0] >> 14) & 0xfc);
+		*ecc_code++ = ((p[0] >> 22) & 0x0f) | ((p[1] <<  4) & 0xf0);
+		*ecc_code++ = ((p[1] >>  4) & 0x3f) | ((p[1] >> 10) & 0xc0);
+		*ecc_code++ =  (p[1] >> 18) & 0xff;
+	}
+
+	return 0;
+}
+
+/* Correct up to 4 bits in data we just read, using state left in the
+ * hardware plus the ecc_code computed when it was first written.
+ */
+static int nand_davinci_correct_4bit(struct mtd_info *mtd,
+		u_char *data, u_char *ecc_code, u_char *null)
+{
+	int i;
+	struct davinci_nand_info *info = to_davinci_nand(mtd);
+	unsigned short ecc10[8];
+	unsigned short *ecc16;
+	u32 syndrome[4];
+	unsigned num_errors, corrected;
+
+	/* All bytes 0xff?  It's an erased page; ignore its ECC. */
+	for (i = 0; i < 10; i++) {
+		if (ecc_code[i] != 0xff)
+			goto compare;
+	}
+	return 0;
+
+compare:
+	/* Unpack ten bytes into eight 10 bit values.  We know we're
+	 * little-endian, and use type punning for less shifting/masking.
+	 */
+	if (WARN_ON(0x01 & (unsigned) ecc_code))
+		return -EINVAL;
+	ecc16 = (unsigned short *)ecc_code;
+
+	ecc10[0] =  (ecc16[0] >>  0) & 0x3ff;
+	ecc10[1] = ((ecc16[0] >> 10) & 0x3f) | ((ecc16[1] << 6) & 0x3c0);
+	ecc10[2] =  (ecc16[1] >>  4) & 0x3ff;
+	ecc10[3] = ((ecc16[1] >> 14) & 0x3)  | ((ecc16[2] << 2) & 0x3fc);
+	ecc10[4] =  (ecc16[2] >>  8)         | ((ecc16[3] << 8) & 0x300);
+	ecc10[5] =  (ecc16[3] >>  2) & 0x3ff;
+	ecc10[6] = ((ecc16[3] >> 12) & 0xf)  | ((ecc16[4] << 4) & 0x3f0);
+	ecc10[7] =  (ecc16[4] >>  6) & 0x3ff;
+
+	/* Tell ECC controller about the expected ECC codes. */
+	for (i = 7; i >= 0; i--)
+		davinci_nand_writel(info, NAND_4BIT_ECC_LOAD_OFFSET, ecc10[i]);
+
+	/* Allow time for syndrome calculation ... then read it.
+	 * A syndrome of all zeroes 0 means no detected errors.
+	 */
+	davinci_nand_readl(info, NANDFSR_OFFSET);
+	nand_davinci_readecc_4bit(info, syndrome);
+	if (!(syndrome[0] | syndrome[1] | syndrome[2] | syndrome[3]))
+		return 0;
+
+	/* Start address calculation, and wait for it to complete.
+	 * We _could_ start reading more data while this is working,
+	 * to speed up the overall page read.
+	 */
+	davinci_nand_writel(info, NANDFCR_OFFSET,
+			davinci_nand_readl(info, NANDFCR_OFFSET) | BIT(13));
+	for (;;) {
+		u32	fsr = davinci_nand_readl(info, NANDFSR_OFFSET);
+
+		switch ((fsr >> 8) & 0x0f) {
+		case 0:		/* no error, should not happen */
+			return 0;
+		case 1:		/* five or more errors detected */
+			return -EIO;
+		case 2:		/* error addresses computed */
+		case 3:
+			num_errors = 1 + ((fsr >> 16) & 0x03);
+			goto correct;
+		default:	/* still working on it */
+			cpu_relax();
+			continue;
+		}
+	}
+
+correct:
+	/* correct each error */
+	for (i = 0, corrected = 0; i < num_errors; i++) {
+		int error_address, error_value;
+
+		if (i > 1) {
+			error_address = davinci_nand_readl(info,
+						NAND_ERR_ADD2_OFFSET);
+			error_value = davinci_nand_readl(info,
+						NAND_ERR_ERRVAL2_OFFSET);
+		} else {
+			error_address = davinci_nand_readl(info,
+						NAND_ERR_ADD1_OFFSET);
+			error_value = davinci_nand_readl(info,
+						NAND_ERR_ERRVAL1_OFFSET);
+		}
+
+		if (i & 1) {
+			error_address >>= 16;
+			error_value >>= 16;
+		}
+		error_address &= 0x3ff;
+		error_address = (512 + 7) - error_address;
+
+		if (error_address < 512) {
+			data[error_address] ^= error_value;
+			corrected++;
+		}
+	}
+
+	return corrected;
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
  * NOTE:  NAND boot requires ALE == EM_A[1], CLE == EM_A[2], so that's
  * how these chips are normally wired.  This translates to both 8 and 16
  * bit busses using ALE == BIT(3) in byte addresses, and CLE == BIT(4).
@@ -294,6 +484,23 @@ static void __init nand_dm6446evm_flash_init(struct davinci_nand_info *info)
 
 /*----------------------------------------------------------------------*/
 
+/* An ECC layout for using 4-bit ECC with small-page flash, storing
+ * ten ECC bytes plus the manufacturer's bad block marker byte, and
+ * and not overlapping the default BBT markers.
+ */
+static struct nand_ecclayout hwecc4_small __initconst = {
+	.eccbytes = 10,
+	.eccpos = { 0, 1, 2, 3, 4,
+		/* offset 5 holds the badblock marker */
+		6, 7,
+		13, 14, 15, },
+	.oobfree = {
+		{.offset = 8, .length = 5, },
+		{.offset = 16, },
+	},
+};
+
+
 static int __init nand_davinci_probe(struct platform_device *pdev)
 {
 	struct davinci_nand_pdata	*pdata = pdev->dev.platform_data;
@@ -306,6 +513,10 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	uint32_t			val;
 	nand_ecc_modes_t		ecc_mode;
 
+	/* insist on board-specific configuration */
+	if (!pdata)
+		return -ENODEV;
+
 	/* which external chipselect will we be managing? */
 	if (pdev->id < 0 || pdev->id > 3)
 		return -ENODEV;
@@ -351,7 +562,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	info->chip.select_chip	= nand_davinci_select_chip;
 
 	/* options such as NAND_USE_FLASH_BBT or 16-bit widths */
-	info->chip.options	= pdata ? pdata->options : 0;
+	info->chip.options	= pdata->options;
 
 	info->ioaddr		= (uint32_t __force) vaddr;
 
@@ -360,14 +571,8 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	info->mask_chipsel	= pdata->mask_chipsel;
 
 	/* use nandboot-capable ALE/CLE masks by default */
-	if (pdata && pdata->mask_ale)
-		info->mask_ale	= pdata->mask_cle;
-	else
-		info->mask_ale	= MASK_ALE;
-	if (pdata && pdata->mask_cle)
-		info->mask_cle	= pdata->mask_cle;
-	else
-		info->mask_cle	= MASK_CLE;
+	info->mask_ale		= pdata->mask_cle ? : MASK_ALE;
+	info->mask_cle		= pdata->mask_cle ? : MASK_CLE;
 
 	/* Set address of hardware control function */
 	info->chip.cmd_ctrl	= nand_davinci_hwcontrol;
@@ -377,30 +582,44 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	info->chip.read_buf     = nand_davinci_read_buf;
 	info->chip.write_buf    = nand_davinci_write_buf;
 
-	/* use board-specific ECC config; else, the best available */
-	if (pdata)
-		ecc_mode = pdata->ecc_mode;
-	else
-		ecc_mode = NAND_ECC_HW;
+	/* Use board-specific ECC config */
+	ecc_mode		= pdata->ecc_mode;
 
+	ret = -EINVAL;
 	switch (ecc_mode) {
 	case NAND_ECC_NONE:
 	case NAND_ECC_SOFT:
+		pdata->ecc_bits = 0;
 		break;
 	case NAND_ECC_HW:
-		info->chip.ecc.calculate = nand_davinci_calculate_1bit;
-		info->chip.ecc.correct = nand_davinci_correct_1bit;
-		info->chip.ecc.hwctl = nand_davinci_hwctl_1bit;
+		if (pdata->ecc_bits == 4) {
+			/* No sanity checks:  CPUs must support this,
+			 * and the chips may not use NAND_BUSWIDTH_16.
+			 */
+
+			/* No sharing 4-bit hardware between chipselects yet */
+			spin_lock_irq(&davinci_nand_lock);
+			if (ecc4_busy)
+				ret = -EBUSY;
+			else
+				ecc4_busy = true;
+			spin_unlock_irq(&davinci_nand_lock);
+
+			if (ret == -EBUSY)
+				goto err_ecc;
+
+			info->chip.ecc.calculate = nand_davinci_calculate_4bit;
+			info->chip.ecc.correct = nand_davinci_correct_4bit;
+			info->chip.ecc.hwctl = nand_davinci_hwctl_4bit;
+			info->chip.ecc.bytes = 10;
+		} else {
+			info->chip.ecc.calculate = nand_davinci_calculate_1bit;
+			info->chip.ecc.correct = nand_davinci_correct_1bit;
+			info->chip.ecc.hwctl = nand_davinci_hwctl_1bit;
+			info->chip.ecc.bytes = 3;
+		}
 		info->chip.ecc.size = 512;
-		info->chip.ecc.bytes = 3;
 		break;
-	case NAND_ECC_HW_SYNDROME:
-		/* FIXME implement */
-		info->chip.ecc.size = 512;
-		info->chip.ecc.bytes = 10;
-
-		dev_warn(&pdev->dev, "4-bit ECC nyet supported\n");
-		/* FALL THROUGH */
 	default:
 		ret = -EINVAL;
 		goto err_ecc;
@@ -441,12 +660,56 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	spin_unlock_irq(&davinci_nand_lock);
 
 	/* Scan to find existence of the device(s) */
-	ret = nand_scan(&info->mtd, pdata->mask_chipsel ? 2 : 1);
+	ret = nand_scan_ident(&info->mtd, pdata->mask_chipsel ? 2 : 1);
 	if (ret < 0) {
 		dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
 		goto err_scan;
 	}
 
+	/* Update ECC layout if needed ... for 1-bit HW ECC, the default
+	 * is OK, but it allocates 6 bytes when only 3 are needed (for
+	 * each 512 bytes).  For the 4-bit HW ECC, that default is not
+	 * usable:  10 bytes are needed, not 6.
+	 */
+	if (pdata->ecc_bits == 4) {
+		int	chunks = info->mtd.writesize / 512;
+
+		if (!chunks || info->mtd.oobsize < 16) {
+			dev_dbg(&pdev->dev, "too small\n");
+			ret = -EINVAL;
+			goto err_scan;
+		}
+
+		/* For small page chips, preserve the manufacturer's
+		 * badblock marking data ... and make sure a flash BBT
+		 * table marker fits in the free bytes.
+		 */
+		if (chunks == 1) {
+			info->ecclayout = hwecc4_small;
+			info->ecclayout.oobfree[1].length =
+				info->mtd.oobsize - 16;
+			goto syndrome_done;
+		}
+
+		/* For large page chips we'll be wanting to use a
+		 * not-yet-implemented mode that reads OOB data
+		 * before reading the body of the page, to avoid
+		 * the "infix OOB" model of NAND_ECC_HW_SYNDROME
+		 * (and preserve manufacturer badblock markings).
+		 */
+		dev_warn(&pdev->dev, "no 4-bit ECC support yet "
+				"for large page NAND\n");
+		ret = -EIO;
+		goto err_scan;
+
+syndrome_done:
+		info->chip.ecc.layout = &info->ecclayout;
+	}
+
+	ret = nand_scan_tail(&info->mtd);
+	if (ret < 0)
+		goto err_scan;
+
 	if (mtd_has_partitions()) {
 		struct mtd_partition	*mtd_parts = NULL;
 		int			mtd_parts_nb = 0;
@@ -455,22 +718,11 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 			static const char *probes[] __initconst =
 				{ "cmdlinepart", NULL };
 
-			const char		*master_name;
-
-			/* Set info->mtd.name = 0 temporarily */
-			master_name		= info->mtd.name;
-			info->mtd.name		= (char *)0;
-
-			/* info->mtd.name == 0, means: don't bother checking
-			   <mtd-id> */
 			mtd_parts_nb = parse_mtd_partitions(&info->mtd, probes,
 							    &mtd_parts, 0);
-
-			/* Restore info->mtd.name */
-			info->mtd.name = master_name;
 		}
 
-		if (mtd_parts_nb <= 0 && pdata) {
+		if (mtd_parts_nb <= 0) {
 			mtd_parts = pdata->parts;
 			mtd_parts_nb = pdata->nr_parts;
 		}
@@ -483,7 +735,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 				info->partitioned = true;
 		}
 
-	} else if (pdata && pdata->nr_parts) {
+	} else if (pdata->nr_parts) {
 		dev_warn(&pdev->dev, "ignoring %d default partitions on %s\n",
 				pdata->nr_parts, info->mtd.name);
 	}
@@ -509,6 +761,11 @@ err_scan:
 err_clk_enable:
 	clk_put(info->clk);
 
+	spin_lock_irq(&davinci_nand_lock);
+	if (ecc_mode == NAND_ECC_HW_SYNDROME)
+		ecc4_busy = false;
+	spin_unlock_irq(&davinci_nand_lock);
+
 err_ecc:
 err_clk:
 err_ioremap:
@@ -532,6 +789,11 @@ static int __exit nand_davinci_remove(struct platform_device *pdev)
 	else
 		status = del_mtd_device(&info->mtd);
 
+	spin_lock_irq(&davinci_nand_lock);
+	if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
+		ecc4_busy = false;
+	spin_unlock_irq(&davinci_nand_lock);
+
 	iounmap(info->base);
 	iounmap(info->vaddr);
 
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 40c26080ecd..76beea40d2c 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -138,7 +138,14 @@ static struct nand_ecclayout nand_hw_eccoob_8 = {
 static struct nand_ecclayout nand_hw_eccoob_16 = {
 	.eccbytes = 5,
 	.eccpos = {6, 7, 8, 9, 10},
-	.oobfree = {{0, 6}, {12, 4}, }
+	.oobfree = {{0, 5}, {11, 5}, }
+};
+
+static struct nand_ecclayout nand_hw_eccoob_64 = {
+	.eccbytes = 20,
+	.eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
+		   38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
+	.oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
 };
 
 #ifdef CONFIG_MTD_PARTITIONS
@@ -192,7 +199,7 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries,
 			}
 			udelay(1);
 		}
-		if (max_retries <= 0)
+		if (max_retries < 0)
 			DEBUG(MTD_DEBUG_LEVEL0, "%s(%d): INT not set\n",
 			      __func__, param);
 	}
@@ -795,9 +802,13 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 		send_addr(host, (page_addr & 0xff), false);
 
 		if (host->pagesize_2k) {
-			send_addr(host, (page_addr >> 8) & 0xFF, false);
-			if (mtd->size >= 0x40000000)
+			if (mtd->size >= 0x10000000) {
+				/* paddr_8 - paddr_15 */
+				send_addr(host, (page_addr >> 8) & 0xff, false);
 				send_addr(host, (page_addr >> 16) & 0xff, true);
+			} else
+				/* paddr_8 - paddr_15 */
+				send_addr(host, (page_addr >> 8) & 0xff, true);
 		} else {
 			/* One more address cycle for higher density devices */
 			if (mtd->size >= 0x4000000) {
@@ -923,7 +934,6 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 		this->ecc.mode = NAND_ECC_HW;
 		this->ecc.size = 512;
 		this->ecc.bytes = 3;
-		this->ecc.layout = &nand_hw_eccoob_8;
 		tmp = readw(host->regs + NFC_CONFIG1);
 		tmp |= NFC_ECC_EN;
 		writew(tmp, host->regs + NFC_CONFIG1);
@@ -957,12 +967,44 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 		this->ecc.layout = &nand_hw_eccoob_16;
 	}
 
-	host->pagesize_2k = 0;
+	/* first scan to find the device and get the page size */
+	if (nand_scan_ident(mtd, 1)) {
+		err = -ENXIO;
+		goto escan;
+	}
 
-	/* Scan to find existence of the device */
-	if (nand_scan(mtd, 1)) {
-		DEBUG(MTD_DEBUG_LEVEL0,
-		      "MXC_ND: Unable to find any NAND device.\n");
+	host->pagesize_2k = (mtd->writesize == 2048) ? 1 : 0;
+
+	if (this->ecc.mode == NAND_ECC_HW) {
+		switch (mtd->oobsize) {
+		case 8:
+			this->ecc.layout = &nand_hw_eccoob_8;
+			break;
+		case 16:
+			this->ecc.layout = &nand_hw_eccoob_16;
+			break;
+		case 64:
+			this->ecc.layout = &nand_hw_eccoob_64;
+			break;
+		default:
+			/* page size not handled by HW ECC */
+			/* switching back to soft ECC */
+			this->ecc.size = 512;
+			this->ecc.bytes = 3;
+			this->ecc.layout = &nand_hw_eccoob_8;
+			this->ecc.mode = NAND_ECC_SOFT;
+			this->ecc.calculate = NULL;
+			this->ecc.correct = NULL;
+			this->ecc.hwctl = NULL;
+			tmp = readw(host->regs + NFC_CONFIG1);
+			tmp &= ~NFC_ECC_EN;
+			writew(tmp, host->regs + NFC_CONFIG1);
+			break;
+		}
+	}
+
+	/* second phase scan */
+	if (nand_scan_tail(mtd)) {
 		err = -ENXIO;
 		goto escan;
 	}
@@ -985,7 +1027,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	return 0;
 
 escan:
-	free_irq(host->irq, NULL);
+	free_irq(host->irq, host);
 eirq:
 	iounmap(host->regs);
 eres:
@@ -1005,7 +1047,7 @@ static int __devexit mxcnd_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 
 	nand_release(&host->mtd);
-	free_irq(host->irq, NULL);
+	free_irq(host->irq, host);
 	iounmap(host->regs);
 	kfree(host);
 
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 3d7ed432fa4..8c21b89d2d0 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2756,7 +2756,8 @@ int nand_scan_tail(struct mtd_info *mtd)
 	 * the out of band area
 	 */
 	chip->ecc.layout->oobavail = 0;
-	for (i = 0; chip->ecc.layout->oobfree[i].length; i++)
+	for (i = 0; chip->ecc.layout->oobfree[i].length
+			&& i < ARRAY_SIZE(chip->ecc.layout->oobfree); i++)
 		chip->ecc.layout->oobavail +=
 			chip->ecc.layout->oobfree[i].length;
 	mtd->oobavail = chip->ecc.layout->oobavail;
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 868147acce2..c0cb87d6d16 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -428,8 +428,8 @@ EXPORT_SYMBOL(nand_calculate_ecc);
 int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
 		      unsigned char *read_ecc, unsigned char *calc_ecc)
 {
-	unsigned char b0, b1, b2;
-	unsigned char byte_addr, bit_addr;
+	unsigned char b0, b1, b2, bit_addr;
+	unsigned int byte_addr;
 	/* 256 or 512 bytes/ecc  */
 	const uint32_t eccsize_mult =
 			(((struct nand_chip *)mtd->priv)->ecc.size) >> 8;
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
new file mode 100644
index 00000000000..0cd76f89f4b
--- /dev/null
+++ b/drivers/mtd/nand/omap2.c
@@ -0,0 +1,776 @@
+/*
+ * Copyright © 2004 Texas Instruments, Jian Zhang <jzhang@ti.com>
+ * Copyright © 2004 Micron Technology Inc.
+ * Copyright © 2004 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+
+#include <asm/dma.h>
+
+#include <mach/gpmc.h>
+#include <mach/nand.h>
+
+#define GPMC_IRQ_STATUS		0x18
+#define GPMC_ECC_CONFIG		0x1F4
+#define GPMC_ECC_CONTROL	0x1F8
+#define GPMC_ECC_SIZE_CONFIG	0x1FC
+#define GPMC_ECC1_RESULT	0x200
+
+#define	DRIVER_NAME	"omap2-nand"
+
+/* size (4 KiB) for IO mapping */
+#define	NAND_IO_SIZE	SZ_4K
+
+#define	NAND_WP_OFF	0
+#define NAND_WP_BIT	0x00000010
+#define WR_RD_PIN_MONITORING	0x00600000
+
+#define	GPMC_BUF_FULL	0x00000001
+#define	GPMC_BUF_EMPTY	0x00000000
+
+#define NAND_Ecc_P1e		(1 << 0)
+#define NAND_Ecc_P2e		(1 << 1)
+#define NAND_Ecc_P4e		(1 << 2)
+#define NAND_Ecc_P8e		(1 << 3)
+#define NAND_Ecc_P16e		(1 << 4)
+#define NAND_Ecc_P32e		(1 << 5)
+#define NAND_Ecc_P64e		(1 << 6)
+#define NAND_Ecc_P128e		(1 << 7)
+#define NAND_Ecc_P256e		(1 << 8)
+#define NAND_Ecc_P512e		(1 << 9)
+#define NAND_Ecc_P1024e		(1 << 10)
+#define NAND_Ecc_P2048e		(1 << 11)
+
+#define NAND_Ecc_P1o		(1 << 16)
+#define NAND_Ecc_P2o		(1 << 17)
+#define NAND_Ecc_P4o		(1 << 18)
+#define NAND_Ecc_P8o		(1 << 19)
+#define NAND_Ecc_P16o		(1 << 20)
+#define NAND_Ecc_P32o		(1 << 21)
+#define NAND_Ecc_P64o		(1 << 22)
+#define NAND_Ecc_P128o		(1 << 23)
+#define NAND_Ecc_P256o		(1 << 24)
+#define NAND_Ecc_P512o		(1 << 25)
+#define NAND_Ecc_P1024o		(1 << 26)
+#define NAND_Ecc_P2048o		(1 << 27)
+
+#define TF(value)	(value ? 1 : 0)
+
+#define P2048e(a)	(TF(a & NAND_Ecc_P2048e)	<< 0)
+#define P2048o(a)	(TF(a & NAND_Ecc_P2048o)	<< 1)
+#define P1e(a)		(TF(a & NAND_Ecc_P1e)		<< 2)
+#define P1o(a)		(TF(a & NAND_Ecc_P1o)		<< 3)
+#define P2e(a)		(TF(a & NAND_Ecc_P2e)		<< 4)
+#define P2o(a)		(TF(a & NAND_Ecc_P2o)		<< 5)
+#define P4e(a)		(TF(a & NAND_Ecc_P4e)		<< 6)
+#define P4o(a)		(TF(a & NAND_Ecc_P4o)		<< 7)
+
+#define P8e(a)		(TF(a & NAND_Ecc_P8e)		<< 0)
+#define P8o(a)		(TF(a & NAND_Ecc_P8o)		<< 1)
+#define P16e(a)		(TF(a & NAND_Ecc_P16e)		<< 2)
+#define P16o(a)		(TF(a & NAND_Ecc_P16o)		<< 3)
+#define P32e(a)		(TF(a & NAND_Ecc_P32e)		<< 4)
+#define P32o(a)		(TF(a & NAND_Ecc_P32o)		<< 5)
+#define P64e(a)		(TF(a & NAND_Ecc_P64e)		<< 6)
+#define P64o(a)		(TF(a & NAND_Ecc_P64o)		<< 7)
+
+#define P128e(a)	(TF(a & NAND_Ecc_P128e)		<< 0)
+#define P128o(a)	(TF(a & NAND_Ecc_P128o)		<< 1)
+#define P256e(a)	(TF(a & NAND_Ecc_P256e)		<< 2)
+#define P256o(a)	(TF(a & NAND_Ecc_P256o)		<< 3)
+#define P512e(a)	(TF(a & NAND_Ecc_P512e)		<< 4)
+#define P512o(a)	(TF(a & NAND_Ecc_P512o)		<< 5)
+#define P1024e(a)	(TF(a & NAND_Ecc_P1024e)	<< 6)
+#define P1024o(a)	(TF(a & NAND_Ecc_P1024o)	<< 7)
+
+#define P8e_s(a)	(TF(a & NAND_Ecc_P8e)		<< 0)
+#define P8o_s(a)	(TF(a & NAND_Ecc_P8o)		<< 1)
+#define P16e_s(a)	(TF(a & NAND_Ecc_P16e)		<< 2)
+#define P16o_s(a)	(TF(a & NAND_Ecc_P16o)		<< 3)
+#define P1e_s(a)	(TF(a & NAND_Ecc_P1e)		<< 4)
+#define P1o_s(a)	(TF(a & NAND_Ecc_P1o)		<< 5)
+#define P2e_s(a)	(TF(a & NAND_Ecc_P2e)		<< 6)
+#define P2o_s(a)	(TF(a & NAND_Ecc_P2o)		<< 7)
+
+#define P4e_s(a)	(TF(a & NAND_Ecc_P4e)		<< 0)
+#define P4o_s(a)	(TF(a & NAND_Ecc_P4o)		<< 1)
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+struct omap_nand_info {
+	struct nand_hw_control		controller;
+	struct omap_nand_platform_data	*pdata;
+	struct mtd_info			mtd;
+	struct mtd_partition		*parts;
+	struct nand_chip		nand;
+	struct platform_device		*pdev;
+
+	int				gpmc_cs;
+	unsigned long			phys_base;
+	void __iomem			*gpmc_cs_baseaddr;
+	void __iomem			*gpmc_baseaddr;
+};
+
+/**
+ * omap_nand_wp - This function enable or disable the Write Protect feature
+ * @mtd: MTD device structure
+ * @mode: WP ON/OFF
+ */
+static void omap_nand_wp(struct mtd_info *mtd, int mode)
+{
+	struct omap_nand_info *info = container_of(mtd,
+						struct omap_nand_info, mtd);
+
+	unsigned long config = __raw_readl(info->gpmc_baseaddr + GPMC_CONFIG);
+
+	if (mode)
+		config &= ~(NAND_WP_BIT);	/* WP is ON */
+	else
+		config |= (NAND_WP_BIT);	/* WP is OFF */
+
+	__raw_writel(config, (info->gpmc_baseaddr + GPMC_CONFIG));
+}
+
+/**
+ * omap_hwcontrol - hardware specific access to control-lines
+ * @mtd: MTD device structure
+ * @cmd: command to device
+ * @ctrl:
+ * NAND_NCE: bit 0 -> don't care
+ * NAND_CLE: bit 1 -> Command Latch
+ * NAND_ALE: bit 2 -> Address Latch
+ *
+ * NOTE: boards may use different bits for these!!
+ */
+static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct omap_nand_info *info = container_of(mtd,
+					struct omap_nand_info, mtd);
+	switch (ctrl) {
+	case NAND_CTRL_CHANGE | NAND_CTRL_CLE:
+		info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_COMMAND;
+		info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_DATA;
+		break;
+
+	case NAND_CTRL_CHANGE | NAND_CTRL_ALE:
+		info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_ADDRESS;
+		info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_DATA;
+		break;
+
+	case NAND_CTRL_CHANGE | NAND_NCE:
+		info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_DATA;
+		info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_DATA;
+		break;
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		__raw_writeb(cmd, info->nand.IO_ADDR_W);
+}
+
+/**
+ * omap_read_buf16 - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct nand_chip *nand = mtd->priv;
+
+	__raw_readsw(nand->IO_ADDR_R, buf, len / 2);
+}
+
+/**
+ * omap_write_buf16 - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
+{
+	struct omap_nand_info *info = container_of(mtd,
+						struct omap_nand_info, mtd);
+	u16 *p = (u16 *) buf;
+
+	/* FIXME try bursts of writesw() or DMA ... */
+	len >>= 1;
+
+	while (len--) {
+		writew(*p++, info->nand.IO_ADDR_W);
+
+		while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
+						GPMC_STATUS) & GPMC_BUF_FULL))
+			;
+	}
+}
+/**
+ * omap_verify_buf - Verify chip data against buffer
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
+ */
+static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	u16 *p = (u16 *) buf;
+
+	len >>= 1;
+	while (len--) {
+		if (*p++ != cpu_to_le16(readw(info->nand.IO_ADDR_R)))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_MTD_NAND_OMAP_HWECC
+/**
+ * omap_hwecc_init - Initialize the HW ECC for NAND flash in GPMC controller
+ * @mtd: MTD device structure
+ */
+static void omap_hwecc_init(struct mtd_info *mtd)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	struct nand_chip *chip = mtd->priv;
+	unsigned long val = 0x0;
+
+	/* Read from ECC Control Register */
+	val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+	/* Clear all ECC | Enable Reg1 */
+	val = ((0x00000001<<8) | 0x00000001);
+	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+
+	/* Read from ECC Size Config Register */
+	val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
+	/* ECCSIZE1=512 | Select eccResultsize[0-3] */
+	val = ((((chip->ecc.size >> 1) - 1) << 22) | (0x0000000F));
+	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
+}
+
+/**
+ * gen_true_ecc - This function will generate true ECC value
+ * @ecc_buf: buffer to store ecc code
+ *
+ * This generated true ECC value can be used when correcting
+ * data read from NAND flash memory core
+ */
+static void gen_true_ecc(u8 *ecc_buf)
+{
+	u32 tmp = ecc_buf[0] | (ecc_buf[1] << 16) |
+		((ecc_buf[2] & 0xF0) << 20) | ((ecc_buf[2] & 0x0F) << 8);
+
+	ecc_buf[0] = ~(P64o(tmp) | P64e(tmp) | P32o(tmp) | P32e(tmp) |
+			P16o(tmp) | P16e(tmp) | P8o(tmp) | P8e(tmp));
+	ecc_buf[1] = ~(P1024o(tmp) | P1024e(tmp) | P512o(tmp) | P512e(tmp) |
+			P256o(tmp) | P256e(tmp) | P128o(tmp) | P128e(tmp));
+	ecc_buf[2] = ~(P4o(tmp) | P4e(tmp) | P2o(tmp) | P2e(tmp) | P1o(tmp) |
+			P1e(tmp) | P2048o(tmp) | P2048e(tmp));
+}
+
+/**
+ * omap_compare_ecc - Detect (2 bits) and correct (1 bit) error in data
+ * @ecc_data1:  ecc code from nand spare area
+ * @ecc_data2:  ecc code from hardware register obtained from hardware ecc
+ * @page_data:  page data
+ *
+ * This function compares two ECC's and indicates if there is an error.
+ * If the error can be corrected it will be corrected to the buffer.
+ */
+static int omap_compare_ecc(u8 *ecc_data1,	/* read from NAND memory */
+			    u8 *ecc_data2,	/* read from register */
+			    u8 *page_data)
+{
+	uint	i;
+	u8	tmp0_bit[8], tmp1_bit[8], tmp2_bit[8];
+	u8	comp0_bit[8], comp1_bit[8], comp2_bit[8];
+	u8	ecc_bit[24];
+	u8	ecc_sum = 0;
+	u8	find_bit = 0;
+	uint	find_byte = 0;
+	int	isEccFF;
+
+	isEccFF = ((*(u32 *)ecc_data1 & 0xFFFFFF) == 0xFFFFFF);
+
+	gen_true_ecc(ecc_data1);
+	gen_true_ecc(ecc_data2);
+
+	for (i = 0; i <= 2; i++) {
+		*(ecc_data1 + i) = ~(*(ecc_data1 + i));
+		*(ecc_data2 + i) = ~(*(ecc_data2 + i));
+	}
+
+	for (i = 0; i < 8; i++) {
+		tmp0_bit[i]     = *ecc_data1 % 2;
+		*ecc_data1	= *ecc_data1 / 2;
+	}
+
+	for (i = 0; i < 8; i++) {
+		tmp1_bit[i]	 = *(ecc_data1 + 1) % 2;
+		*(ecc_data1 + 1) = *(ecc_data1 + 1) / 2;
+	}
+
+	for (i = 0; i < 8; i++) {
+		tmp2_bit[i]	 = *(ecc_data1 + 2) % 2;
+		*(ecc_data1 + 2) = *(ecc_data1 + 2) / 2;
+	}
+
+	for (i = 0; i < 8; i++) {
+		comp0_bit[i]     = *ecc_data2 % 2;
+		*ecc_data2       = *ecc_data2 / 2;
+	}
+
+	for (i = 0; i < 8; i++) {
+		comp1_bit[i]     = *(ecc_data2 + 1) % 2;
+		*(ecc_data2 + 1) = *(ecc_data2 + 1) / 2;
+	}
+
+	for (i = 0; i < 8; i++) {
+		comp2_bit[i]     = *(ecc_data2 + 2) % 2;
+		*(ecc_data2 + 2) = *(ecc_data2 + 2) / 2;
+	}
+
+	for (i = 0; i < 6; i++)
+		ecc_bit[i] = tmp2_bit[i + 2] ^ comp2_bit[i + 2];
+
+	for (i = 0; i < 8; i++)
+		ecc_bit[i + 6] = tmp0_bit[i] ^ comp0_bit[i];
+
+	for (i = 0; i < 8; i++)
+		ecc_bit[i + 14] = tmp1_bit[i] ^ comp1_bit[i];
+
+	ecc_bit[22] = tmp2_bit[0] ^ comp2_bit[0];
+	ecc_bit[23] = tmp2_bit[1] ^ comp2_bit[1];
+
+	for (i = 0; i < 24; i++)
+		ecc_sum += ecc_bit[i];
+
+	switch (ecc_sum) {
+	case 0:
+		/* Not reached because this function is not called if
+		 *  ECC values are equal
+		 */
+		return 0;
+
+	case 1:
+		/* Uncorrectable error */
+		DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR 1\n");
+		return -1;
+
+	case 11:
+		/* UN-Correctable error */
+		DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR B\n");
+		return -1;
+
+	case 12:
+		/* Correctable error */
+		find_byte = (ecc_bit[23] << 8) +
+			    (ecc_bit[21] << 7) +
+			    (ecc_bit[19] << 6) +
+			    (ecc_bit[17] << 5) +
+			    (ecc_bit[15] << 4) +
+			    (ecc_bit[13] << 3) +
+			    (ecc_bit[11] << 2) +
+			    (ecc_bit[9]  << 1) +
+			    ecc_bit[7];
+
+		find_bit = (ecc_bit[5] << 2) + (ecc_bit[3] << 1) + ecc_bit[1];
+
+		DEBUG(MTD_DEBUG_LEVEL0, "Correcting single bit ECC error at "
+				"offset: %d, bit: %d\n", find_byte, find_bit);
+
+		page_data[find_byte] ^= (1 << find_bit);
+
+		return 0;
+	default:
+		if (isEccFF) {
+			if (ecc_data2[0] == 0 &&
+			    ecc_data2[1] == 0 &&
+			    ecc_data2[2] == 0)
+				return 0;
+		}
+		DEBUG(MTD_DEBUG_LEVEL0, "UNCORRECTED_ERROR default\n");
+		return -1;
+	}
+}
+
+/**
+ * omap_correct_data - Compares the ECC read with HW generated ECC
+ * @mtd: MTD device structure
+ * @dat: page data
+ * @read_ecc: ecc read from nand flash
+ * @calc_ecc: ecc read from HW ECC registers
+ *
+ * Compares the ecc read from nand spare area with ECC registers values
+ * and if ECC's mismached, it will call 'omap_compare_ecc' for error detection
+ * and correction.
+ */
+static int omap_correct_data(struct mtd_info *mtd, u_char *dat,
+				u_char *read_ecc, u_char *calc_ecc)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	int blockCnt = 0, i = 0, ret = 0;
+
+	/* Ex NAND_ECC_HW12_2048 */
+	if ((info->nand.ecc.mode == NAND_ECC_HW) &&
+			(info->nand.ecc.size  == 2048))
+		blockCnt = 4;
+	else
+		blockCnt = 1;
+
+	for (i = 0; i < blockCnt; i++) {
+		if (memcmp(read_ecc, calc_ecc, 3) != 0) {
+			ret = omap_compare_ecc(read_ecc, calc_ecc, dat);
+			if (ret < 0)
+				return ret;
+		}
+		read_ecc += 3;
+		calc_ecc += 3;
+		dat      += 512;
+	}
+	return 0;
+}
+
+/**
+ * omap_calcuate_ecc - Generate non-inverted ECC bytes.
+ * @mtd: MTD device structure
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc_code: The ecc_code buffer
+ *
+ * Using noninverted ECC can be considered ugly since writing a blank
+ * page ie. padding will clear the ECC bytes. This is no problem as long
+ * nobody is trying to write data on the seemingly unused page. Reading
+ * an erased page will produce an ECC mismatch between generated and read
+ * ECC bytes that has to be dealt with separately.
+ */
+static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+				u_char *ecc_code)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	unsigned long val = 0x0;
+	unsigned long reg;
+
+	/* Start Reading from HW ECC1_Result = 0x200 */
+	reg = (unsigned long)(info->gpmc_baseaddr + GPMC_ECC1_RESULT);
+	val = __raw_readl(reg);
+	*ecc_code++ = val;          /* P128e, ..., P1e */
+	*ecc_code++ = val >> 16;    /* P128o, ..., P1o */
+	/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
+	*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
+	reg += 4;
+
+	return 0;
+}
+
+/**
+ * omap_enable_hwecc - This function enables the hardware ecc functionality
+ * @mtd: MTD device structure
+ * @mode: Read/Write mode
+ */
+static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	struct nand_chip *chip = mtd->priv;
+	unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+	unsigned long val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONFIG);
+
+	switch (mode) {
+	case NAND_ECC_READ:
+		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+		break;
+	case NAND_ECC_READSYN:
+		 __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+		break;
+	case NAND_ECC_WRITE:
+		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+		break;
+	default:
+		DEBUG(MTD_DEBUG_LEVEL0, "Error: Unrecognized Mode[%d]!\n",
+					mode);
+		break;
+	}
+
+	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONFIG);
+}
+#endif
+
+/**
+ * omap_wait - wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND Chip structure
+ *
+ * Wait function is called during Program and erase operations and
+ * the way it is called from MTD layer, we should wait till the NAND
+ * chip is ready after the programming/erase operation has completed.
+ *
+ * Erase can take up to 400ms and program up to 20ms according to
+ * general NAND and SmartMedia specs
+ */
+static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+	struct nand_chip *this = mtd->priv;
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	unsigned long timeo = jiffies;
+	int status, state = this->state;
+
+	if (state == FL_ERASING)
+		timeo += (HZ * 400) / 1000;
+	else
+		timeo += (HZ * 20) / 1000;
+
+	this->IO_ADDR_W = (void *) info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_COMMAND;
+	this->IO_ADDR_R = (void *) info->gpmc_cs_baseaddr + GPMC_CS_NAND_DATA;
+
+	__raw_writeb(NAND_CMD_STATUS & 0xFF, this->IO_ADDR_W);
+
+	while (time_before(jiffies, timeo)) {
+		status = __raw_readb(this->IO_ADDR_R);
+		if (!(status & 0x40))
+			break;
+	}
+	return status;
+}
+
+/**
+ * omap_dev_ready - calls the platform specific dev_ready function
+ * @mtd: MTD device structure
+ */
+static int omap_dev_ready(struct mtd_info *mtd)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	unsigned int val = __raw_readl(info->gpmc_baseaddr + GPMC_IRQ_STATUS);
+
+	if ((val & 0x100) == 0x100) {
+		/* Clear IRQ Interrupt */
+		val |= 0x100;
+		val &= ~(0x0);
+		__raw_writel(val, info->gpmc_baseaddr + GPMC_IRQ_STATUS);
+	} else {
+		unsigned int cnt = 0;
+		while (cnt++ < 0x1FF) {
+			if  ((val & 0x100) == 0x100)
+				return 0;
+			val = __raw_readl(info->gpmc_baseaddr +
+							GPMC_IRQ_STATUS);
+		}
+	}
+
+	return 1;
+}
+
+static int __devinit omap_nand_probe(struct platform_device *pdev)
+{
+	struct omap_nand_info		*info;
+	struct omap_nand_platform_data	*pdata;
+	int				err;
+	unsigned long 			val;
+
+
+	pdata = pdev->dev.platform_data;
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "platform data missing\n");
+		return -ENODEV;
+	}
+
+	info = kzalloc(sizeof(struct omap_nand_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, info);
+
+	spin_lock_init(&info->controller.lock);
+	init_waitqueue_head(&info->controller.wq);
+
+	info->pdev = pdev;
+
+	info->gpmc_cs		= pdata->cs;
+	info->gpmc_baseaddr	= pdata->gpmc_baseaddr;
+	info->gpmc_cs_baseaddr	= pdata->gpmc_cs_baseaddr;
+
+	info->mtd.priv		= &info->nand;
+	info->mtd.name		= dev_name(&pdev->dev);
+	info->mtd.owner		= THIS_MODULE;
+
+	err = gpmc_cs_request(info->gpmc_cs, NAND_IO_SIZE, &info->phys_base);
+	if (err < 0) {
+		dev_err(&pdev->dev, "Cannot request GPMC CS\n");
+		goto out_free_info;
+	}
+
+	/* Enable RD PIN Monitoring Reg */
+	if (pdata->dev_ready) {
+		val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1);
+		val |= WR_RD_PIN_MONITORING;
+		gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val);
+	}
+
+	val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG7);
+	val &= ~(0xf << 8);
+	val |=  (0xc & 0xf) << 8;
+	gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG7, val);
+
+	/* NAND write protect off */
+	omap_nand_wp(&info->mtd, NAND_WP_OFF);
+
+	if (!request_mem_region(info->phys_base, NAND_IO_SIZE,
+				pdev->dev.driver->name)) {
+		err = -EBUSY;
+		goto out_free_cs;
+	}
+
+	info->nand.IO_ADDR_R = ioremap(info->phys_base, NAND_IO_SIZE);
+	if (!info->nand.IO_ADDR_R) {
+		err = -ENOMEM;
+		goto out_release_mem_region;
+	}
+	info->nand.controller = &info->controller;
+
+	info->nand.IO_ADDR_W = info->nand.IO_ADDR_R;
+	info->nand.cmd_ctrl  = omap_hwcontrol;
+
+	/* REVISIT:  only supports 16-bit NAND flash */
+
+	info->nand.read_buf   = omap_read_buf16;
+	info->nand.write_buf  = omap_write_buf16;
+	info->nand.verify_buf = omap_verify_buf;
+
+	/*
+	 * If RDY/BSY line is connected to OMAP then use the omap ready
+	 * funcrtion and the generic nand_wait function which reads the status
+	 * register after monitoring the RDY/BSY line.Otherwise use a standard
+	 * chip delay which is slightly more than tR (AC Timing) of the NAND
+	 * device and read status register until you get a failure or success
+	 */
+	if (pdata->dev_ready) {
+		info->nand.dev_ready = omap_dev_ready;
+		info->nand.chip_delay = 0;
+	} else {
+		info->nand.waitfunc = omap_wait;
+		info->nand.chip_delay = 50;
+	}
+
+	info->nand.options  |= NAND_SKIP_BBTSCAN;
+	if ((gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1) & 0x3000)
+								== 0x1000)
+		info->nand.options  |= NAND_BUSWIDTH_16;
+
+#ifdef CONFIG_MTD_NAND_OMAP_HWECC
+	info->nand.ecc.bytes		= 3;
+	info->nand.ecc.size		= 512;
+	info->nand.ecc.calculate	= omap_calculate_ecc;
+	info->nand.ecc.hwctl		= omap_enable_hwecc;
+	info->nand.ecc.correct		= omap_correct_data;
+	info->nand.ecc.mode		= NAND_ECC_HW;
+
+	/* init HW ECC */
+	omap_hwecc_init(&info->mtd);
+#else
+	info->nand.ecc.mode = NAND_ECC_SOFT;
+#endif
+
+	/* DIP switches on some boards change between 8 and 16 bit
+	 * bus widths for flash.  Try the other width if the first try fails.
+	 */
+	if (nand_scan(&info->mtd, 1)) {
+		info->nand.options ^= NAND_BUSWIDTH_16;
+		if (nand_scan(&info->mtd, 1)) {
+			err = -ENXIO;
+			goto out_release_mem_region;
+		}
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+	err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
+	if (err > 0)
+		add_mtd_partitions(&info->mtd, info->parts, err);
+	else if (pdata->parts)
+		add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
+	else
+#endif
+		add_mtd_device(&info->mtd);
+
+	platform_set_drvdata(pdev, &info->mtd);
+
+	return 0;
+
+out_release_mem_region:
+	release_mem_region(info->phys_base, NAND_IO_SIZE);
+out_free_cs:
+	gpmc_cs_free(info->gpmc_cs);
+out_free_info:
+	kfree(info);
+
+	return err;
+}
+
+static int omap_nand_remove(struct platform_device *pdev)
+{
+	struct mtd_info *mtd = platform_get_drvdata(pdev);
+	struct omap_nand_info *info = mtd->priv;
+
+	platform_set_drvdata(pdev, NULL);
+	/* Release NAND device, its internal structures and partitions */
+	nand_release(&info->mtd);
+	iounmap(info->nand.IO_ADDR_R);
+	kfree(&info->mtd);
+	return 0;
+}
+
+static struct platform_driver omap_nand_driver = {
+	.probe		= omap_nand_probe,
+	.remove		= omap_nand_remove,
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init omap_nand_init(void)
+{
+	printk(KERN_INFO "%s driver initializing\n", DRIVER_NAME);
+	return platform_driver_register(&omap_nand_driver);
+}
+
+static void __exit omap_nand_exit(void)
+{
+	platform_driver_unregister(&omap_nand_driver);
+}
+
+module_init(omap_nand_init);
+module_exit(omap_nand_exit);
+
+MODULE_ALIAS(DRIVER_NAME);
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Glue layer for NAND flash on TI OMAP boards");
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index c2dfd3ea353..7ad972229db 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -47,6 +47,28 @@ static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl
 	writeb(cmd, nc->IO_ADDR_W + offs);
 }
 
+static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	void __iomem *io_base = chip->IO_ADDR_R;
+	uint64_t *buf64;
+	int i = 0;
+
+	while (len && (unsigned long)buf & 7) {
+		*buf++ = readb(io_base);
+		len--;
+	}
+	buf64 = (uint64_t *)buf;
+	while (i < len/8) {
+		uint64_t x;
+		asm ("ldrd\t%0, [%1]" : "=r" (x) : "r" (io_base));
+		buf64[i++] = x;
+	}
+	i *= 8;
+	while (i < len)
+		buf[i++] = readb(io_base);
+}
+
 static int __init orion_nand_probe(struct platform_device *pdev)
 {
 	struct mtd_info *mtd;
@@ -83,6 +105,7 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 	nc->priv = board;
 	nc->IO_ADDR_R = nc->IO_ADDR_W = io_base;
 	nc->cmd_ctrl = orion_nand_cmd_ctrl;
+	nc->read_buf = orion_nand_read_buf;
 	nc->ecc.mode = NAND_ECC_SOFT;
 
 	if (board->chip_delay)
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 86e1d08eee0..4e16c6f5bdd 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -61,6 +61,8 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 	data->chip.cmd_ctrl = pdata->ctrl.cmd_ctrl;
 	data->chip.dev_ready = pdata->ctrl.dev_ready;
 	data->chip.select_chip = pdata->ctrl.select_chip;
+	data->chip.write_buf = pdata->ctrl.write_buf;
+	data->chip.read_buf = pdata->ctrl.read_buf;
 	data->chip.chip_delay = pdata->chip.chip_delay;
 	data->chip.options |= pdata->chip.options;
 
@@ -70,6 +72,13 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, data);
 
+	/* Handle any platform specific setup */
+	if (pdata->ctrl.probe) {
+		res = pdata->ctrl.probe(pdev);
+		if (res)
+			goto out;
+	}
+
 	/* Scan to find existance of the device */
 	if (nand_scan(&data->mtd, 1)) {
 		res = -ENXIO;
@@ -86,6 +95,8 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 			return 0;
 		}
 	}
+	if (pdata->chip.set_parts)
+		pdata->chip.set_parts(data->mtd.size, &pdata->chip);
 	if (pdata->chip.partitions) {
 		data->parts = pdata->chip.partitions;
 		res = add_mtd_partitions(&data->mtd, data->parts,
@@ -99,6 +110,8 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 
 	nand_release(&data->mtd);
 out:
+	if (pdata->ctrl.remove)
+		pdata->ctrl.remove(pdev);
 	platform_set_drvdata(pdev, NULL);
 	iounmap(data->io_base);
 	kfree(data);
@@ -111,15 +124,15 @@ out:
 static int __devexit plat_nand_remove(struct platform_device *pdev)
 {
 	struct plat_nand_data *data = platform_get_drvdata(pdev);
-#ifdef CONFIG_MTD_PARTITIONS
 	struct platform_nand_data *pdata = pdev->dev.platform_data;
-#endif
 
 	nand_release(&data->mtd);
 #ifdef CONFIG_MTD_PARTITIONS
 	if (data->parts && data->parts != pdata->chip.partitions)
 		kfree(data->parts);
 #endif
+	if (pdata->ctrl.remove)
+		pdata->ctrl.remove(pdev);
 	iounmap(data->io_base);
 	kfree(data);
 
@@ -128,7 +141,7 @@ static int __devexit plat_nand_remove(struct platform_device *pdev)
 
 static struct platform_driver plat_nand_driver = {
 	.probe		= plat_nand_probe,
-	.remove		= plat_nand_remove,
+	.remove		= __devexit_p(plat_nand_remove),
 	.driver		= {
 		.name	= "gen_nand",
 		.owner	= THIS_MODULE,
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 8e375d5fe23..11dc7e69c4f 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -74,6 +74,14 @@ static struct nand_ecclayout nand_hw_eccoob = {
 
 struct s3c2410_nand_info;
 
+/**
+ * struct s3c2410_nand_mtd - driver MTD structure
+ * @mtd: The MTD instance to pass to the MTD layer.
+ * @chip: The NAND chip information.
+ * @set: The platform information supplied for this set of NAND chips.
+ * @info: Link back to the hardware information.
+ * @scan_res: The result from calling nand_scan_ident().
+*/
 struct s3c2410_nand_mtd {
 	struct mtd_info			mtd;
 	struct nand_chip		chip;
@@ -90,6 +98,21 @@ enum s3c_cpu_type {
 
 /* overview of the s3c2410 nand state */
 
+/**
+ * struct s3c2410_nand_info - NAND controller state.
+ * @mtds: An array of MTD instances on this controoler.
+ * @platform: The platform data for this board.
+ * @device: The platform device we bound to.
+ * @area: The IO area resource that came from request_mem_region().
+ * @clk: The clock resource for this controller.
+ * @regs: The area mapped for the hardware registers described by @area.
+ * @sel_reg: Pointer to the register controlling the NAND selection.
+ * @sel_bit: The bit in @sel_reg to select the NAND chip.
+ * @mtd_count: The number of MTDs created from this controller.
+ * @save_sel: The contents of @sel_reg to be saved over suspend.
+ * @clk_rate: The clock rate from @clk.
+ * @cpu_type: The exact type of this controller.
+ */
 struct s3c2410_nand_info {
 	/* mtd info */
 	struct nand_hw_control		controller;
@@ -145,12 +168,19 @@ static inline int allow_clk_stop(struct s3c2410_nand_info *info)
 
 #define NS_IN_KHZ 1000000
 
+/**
+ * s3c_nand_calc_rate - calculate timing data.
+ * @wanted: The cycle time in nanoseconds.
+ * @clk: The clock rate in kHz.
+ * @max: The maximum divider value.
+ *
+ * Calculate the timing value from the given parameters.
+ */
 static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
 {
 	int result;
 
-	result = (wanted * clk) / NS_IN_KHZ;
-	result++;
+	result = DIV_ROUND_UP((wanted * clk), NS_IN_KHZ);
 
 	pr_debug("result %d from %ld, %d\n", result, clk, wanted);
 
@@ -169,13 +199,21 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
 
 /* controller setup */
 
+/**
+ * s3c2410_nand_setrate - setup controller timing information.
+ * @info: The controller instance.
+ *
+ * Given the information supplied by the platform, calculate and set
+ * the necessary timing registers in the hardware to generate the
+ * necessary timing cycles to the hardware.
+ */
 static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 {
 	struct s3c2410_platform_nand *plat = info->platform;
 	int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4;
 	int tacls, twrph0, twrph1;
 	unsigned long clkrate = clk_get_rate(info->clk);
-	unsigned long set, cfg, mask;
+	unsigned long uninitialized_var(set), cfg, uninitialized_var(mask);
 	unsigned long flags;
 
 	/* calculate the timing information for the controller */
@@ -215,9 +253,9 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 
 	case TYPE_S3C2440:
 	case TYPE_S3C2412:
-		mask = (S3C2410_NFCONF_TACLS(tacls_max - 1) |
-			S3C2410_NFCONF_TWRPH0(7) |
-			S3C2410_NFCONF_TWRPH1(7));
+		mask = (S3C2440_NFCONF_TACLS(tacls_max - 1) |
+			S3C2440_NFCONF_TWRPH0(7) |
+			S3C2440_NFCONF_TWRPH1(7));
 
 		set = S3C2440_NFCONF_TACLS(tacls - 1);
 		set |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
@@ -225,14 +263,9 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 		break;
 
 	default:
-		/* keep compiler happy */
-		mask = 0;
-		set = 0;
 		BUG();
 	}
 
-	dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
-
 	local_irq_save(flags);
 
 	cfg = readl(info->regs + S3C2410_NFCONF);
@@ -242,9 +275,18 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 
 	local_irq_restore(flags);
 
+	dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
+
 	return 0;
 }
 
+/**
+ * s3c2410_nand_inithw - basic hardware initialisation
+ * @info: The hardware state.
+ *
+ * Do the basic initialisation of the hardware, using s3c2410_nand_setrate()
+ * to setup the hardware access speeds and set the controller to be enabled.
+*/
 static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
 {
 	int ret;
@@ -268,8 +310,19 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
 	return 0;
 }
 
-/* select chip */
-
+/**
+ * s3c2410_nand_select_chip - select the given nand chip
+ * @mtd: The MTD instance for this chip.
+ * @chip: The chip number.
+ *
+ * This is called by the MTD layer to either select a given chip for the
+ * @mtd instance, or to indicate that the access has finished and the
+ * chip can be de-selected.
+ *
+ * The routine ensures that the nFCE line is correctly setup, and any
+ * platform specific selection code is called to route nFCE to the specific
+ * chip.
+ */
 static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
 {
 	struct s3c2410_nand_info *info;
@@ -530,7 +583,16 @@ static void s3c2410_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 static void s3c2440_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
-	readsl(info->regs + S3C2440_NFDATA, buf, len / 4);
+
+	readsl(info->regs + S3C2440_NFDATA, buf, len >> 2);
+
+	/* cleanup if we've got less than a word to do */
+	if (len & 3) {
+		buf += len & ~3;
+
+		for (; len & 3; len--)
+			*buf++ = readb(info->regs + S3C2440_NFDATA);
+	}
 }
 
 static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
@@ -542,7 +604,16 @@ static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int
 static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
-	writesl(info->regs + S3C2440_NFDATA, buf, len / 4);
+
+	writesl(info->regs + S3C2440_NFDATA, buf, len >> 2);
+
+	/* cleanup any fractional write */
+	if (len & 3) {
+		buf += len & ~3;
+
+		for (; len & 3; len--, buf++)
+			writeb(*buf, info->regs + S3C2440_NFDATA);
+	}
 }
 
 /* cpufreq driver support */
@@ -593,7 +664,7 @@ static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *inf
 
 /* device management functions */
 
-static int s3c2410_nand_remove(struct platform_device *pdev)
+static int s3c24xx_nand_remove(struct platform_device *pdev)
 {
 	struct s3c2410_nand_info *info = to_nand_info(pdev);
 
@@ -645,17 +716,31 @@ static int s3c2410_nand_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
 static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
 				      struct s3c2410_nand_mtd *mtd,
 				      struct s3c2410_nand_set *set)
 {
+	struct mtd_partition *part_info;
+	int nr_part = 0;
+
 	if (set == NULL)
 		return add_mtd_device(&mtd->mtd);
 
-	if (set->nr_partitions > 0 && set->partitions != NULL) {
-		return add_mtd_partitions(&mtd->mtd, set->partitions, set->nr_partitions);
+	if (set->nr_partitions == 0) {
+		mtd->mtd.name = set->name;
+		nr_part = parse_mtd_partitions(&mtd->mtd, part_probes,
+						&part_info, 0);
+	} else {
+		if (set->nr_partitions > 0 && set->partitions != NULL) {
+			nr_part = set->nr_partitions;
+			part_info = set->partitions;
+		}
 	}
 
+	if (nr_part > 0 && part_info)
+		return add_mtd_partitions(&mtd->mtd, part_info, nr_part);
+
 	return add_mtd_device(&mtd->mtd);
 }
 #else
@@ -667,11 +752,16 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
 }
 #endif
 
-/* s3c2410_nand_init_chip
+/**
+ * s3c2410_nand_init_chip - initialise a single instance of an chip
+ * @info: The base NAND controller the chip is on.
+ * @nmtd: The new controller MTD instance to fill in.
+ * @set: The information passed from the board specific platform data.
  *
- * init a single instance of an chip
-*/
-
+ * Initialise the given @nmtd from the information in @info and @set. This
+ * readies the structure for use with the MTD layer functions by ensuring
+ * all pointers are setup and the necessary control routines selected.
+ */
 static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 				   struct s3c2410_nand_mtd *nmtd,
 				   struct s3c2410_nand_set *set)
@@ -757,14 +847,40 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 
 	if (set->disable_ecc)
 		chip->ecc.mode	= NAND_ECC_NONE;
+
+	switch (chip->ecc.mode) {
+	case NAND_ECC_NONE:
+		dev_info(info->device, "NAND ECC disabled\n");
+		break;
+	case NAND_ECC_SOFT:
+		dev_info(info->device, "NAND soft ECC\n");
+		break;
+	case NAND_ECC_HW:
+		dev_info(info->device, "NAND hardware ECC\n");
+		break;
+	default:
+		dev_info(info->device, "NAND ECC UNKNOWN\n");
+		break;
+	}
+
+	/* If you use u-boot BBT creation code, specifying this flag will
+	 * let the kernel fish out the BBT from the NAND, and also skip the
+	 * full NAND scan that can take 1/2s or so. Little things... */
+	if (set->flash_bbt)
+		chip->options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
 }
 
-/* s3c2410_nand_update_chip
+/**
+ * s3c2410_nand_update_chip - post probe update
+ * @info: The controller instance.
+ * @nmtd: The driver version of the MTD instance.
  *
- * post-probe chip update, to change any items, such as the
- * layout for large page nand
- */
-
+ * This routine is called after the chip probe has succesfully completed
+ * and the relevant per-chip information updated. This call ensure that
+ * we update the internal state accordingly.
+ *
+ * The internal state is currently limited to the ECC state information.
+*/
 static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 				     struct s3c2410_nand_mtd *nmtd)
 {
@@ -773,33 +889,33 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 	dev_dbg(info->device, "chip %p => page shift %d\n",
 		chip, chip->page_shift);
 
-	if (hardware_ecc) {
+	if (chip->ecc.mode != NAND_ECC_HW)
+		return;
+
 		/* change the behaviour depending on wether we are using
 		 * the large or small page nand device */
 
-		if (chip->page_shift > 10) {
-			chip->ecc.size	    = 256;
-			chip->ecc.bytes	    = 3;
-		} else {
-			chip->ecc.size	    = 512;
-			chip->ecc.bytes	    = 3;
-			chip->ecc.layout    = &nand_hw_eccoob;
-		}
+	if (chip->page_shift > 10) {
+		chip->ecc.size	    = 256;
+		chip->ecc.bytes	    = 3;
+	} else {
+		chip->ecc.size	    = 512;
+		chip->ecc.bytes	    = 3;
+		chip->ecc.layout    = &nand_hw_eccoob;
 	}
 }
 
-/* s3c2410_nand_probe
+/* s3c24xx_nand_probe
  *
  * called by device layer when it finds a device matching
  * one our driver can handled. This code checks to see if
  * it can allocate all necessary resources then calls the
  * nand layer to look for devices
 */
-
-static int s3c24xx_nand_probe(struct platform_device *pdev,
-			      enum s3c_cpu_type cpu_type)
+static int s3c24xx_nand_probe(struct platform_device *pdev)
 {
 	struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
+	enum s3c_cpu_type cpu_type; 
 	struct s3c2410_nand_info *info;
 	struct s3c2410_nand_mtd *nmtd;
 	struct s3c2410_nand_set *sets;
@@ -809,6 +925,8 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 	int nr_sets;
 	int setno;
 
+	cpu_type = platform_get_device_id(pdev)->driver_data;
+
 	pr_debug("s3c2410_nand_probe(%p)\n", pdev);
 
 	info = kmalloc(sizeof(*info), GFP_KERNEL);
@@ -922,7 +1040,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 	return 0;
 
  exit_error:
-	s3c2410_nand_remove(pdev);
+	s3c24xx_nand_remove(pdev);
 
 	if (err == 0)
 		err = -EINVAL;
@@ -983,50 +1101,33 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
 
 /* driver device registration */
 
-static int s3c2410_nand_probe(struct platform_device *dev)
-{
-	return s3c24xx_nand_probe(dev, TYPE_S3C2410);
-}
-
-static int s3c2440_nand_probe(struct platform_device *dev)
-{
-	return s3c24xx_nand_probe(dev, TYPE_S3C2440);
-}
-
-static int s3c2412_nand_probe(struct platform_device *dev)
-{
-	return s3c24xx_nand_probe(dev, TYPE_S3C2412);
-}
-
-static struct platform_driver s3c2410_nand_driver = {
-	.probe		= s3c2410_nand_probe,
-	.remove		= s3c2410_nand_remove,
-	.suspend	= s3c24xx_nand_suspend,
-	.resume		= s3c24xx_nand_resume,
-	.driver		= {
-		.name	= "s3c2410-nand",
-		.owner	= THIS_MODULE,
+static struct platform_device_id s3c24xx_driver_ids[] = {
+	{
+		.name		= "s3c2410-nand",
+		.driver_data	= TYPE_S3C2410,
+	}, {
+		.name		= "s3c2440-nand",
+		.driver_data	= TYPE_S3C2440,
+	}, {
+		.name		= "s3c2412-nand",
+		.driver_data	= TYPE_S3C2412,
+	}, {
+		.name		= "s3c6400-nand",
+		.driver_data	= TYPE_S3C2412, /* compatible with 2412 */
 	},
+	{ }
 };
 
-static struct platform_driver s3c2440_nand_driver = {
-	.probe		= s3c2440_nand_probe,
-	.remove		= s3c2410_nand_remove,
-	.suspend	= s3c24xx_nand_suspend,
-	.resume		= s3c24xx_nand_resume,
-	.driver		= {
-		.name	= "s3c2440-nand",
-		.owner	= THIS_MODULE,
-	},
-};
+MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
 
-static struct platform_driver s3c2412_nand_driver = {
-	.probe		= s3c2412_nand_probe,
-	.remove		= s3c2410_nand_remove,
+static struct platform_driver s3c24xx_nand_driver = {
+	.probe		= s3c24xx_nand_probe,
+	.remove		= s3c24xx_nand_remove,
 	.suspend	= s3c24xx_nand_suspend,
 	.resume		= s3c24xx_nand_resume,
+	.id_table	= s3c24xx_driver_ids,
 	.driver		= {
-		.name	= "s3c2412-nand",
+		.name	= "s3c24xx-nand",
 		.owner	= THIS_MODULE,
 	},
 };
@@ -1035,16 +1136,12 @@ static int __init s3c2410_nand_init(void)
 {
 	printk("S3C24XX NAND Driver, (c) 2004 Simtec Electronics\n");
 
-	platform_driver_register(&s3c2412_nand_driver);
-	platform_driver_register(&s3c2440_nand_driver);
-	return platform_driver_register(&s3c2410_nand_driver);
+	return platform_driver_register(&s3c24xx_nand_driver);
 }
 
 static void __exit s3c2410_nand_exit(void)
 {
-	platform_driver_unregister(&s3c2412_nand_driver);
-	platform_driver_unregister(&s3c2440_nand_driver);
-	platform_driver_unregister(&s3c2410_nand_driver);
+	platform_driver_unregister(&s3c24xx_nand_driver);
 }
 
 module_init(s3c2410_nand_init);
@@ -1053,6 +1150,3 @@ module_exit(s3c2410_nand_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
 MODULE_DESCRIPTION("S3C24XX MTD NAND driver");
-MODULE_ALIAS("platform:s3c2410-nand");
-MODULE_ALIAS("platform:s3c2412-nand");
-MODULE_ALIAS("platform:s3c2440-nand");
diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
index 81247926489..488088eff2c 100644
--- a/drivers/mtd/nand/txx9ndfmc.c
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -64,7 +64,7 @@ struct txx9ndfmc_priv {
 	struct nand_chip chip;
 	struct mtd_info mtd;
 	int cs;
-	char mtdname[BUS_ID_SIZE + 2];
+	const char *mtdname;
 };
 
 #define MAX_TXX9NDFMC_DEV	4
@@ -334,16 +334,23 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
 
 		if (plat->ch_mask != 1) {
 			txx9_priv->cs = i;
-			sprintf(txx9_priv->mtdname, "%s.%u",
-				dev_name(&dev->dev), i);
+			txx9_priv->mtdname = kasprintf(GFP_KERNEL, "%s.%u",
+						       dev_name(&dev->dev), i);
 		} else {
 			txx9_priv->cs = -1;
-			strcpy(txx9_priv->mtdname, dev_name(&dev->dev));
+			txx9_priv->mtdname = kstrdup(dev_name(&dev->dev),
+						     GFP_KERNEL);
+		}
+		if (!txx9_priv->mtdname) {
+			kfree(txx9_priv);
+			dev_err(&dev->dev, "Unable to allocate MTD name.\n");
+			continue;
 		}
 		if (plat->wide_mask & (1 << i))
 			chip->options |= NAND_BUSWIDTH_16;
 
 		if (nand_scan(mtd, 1)) {
+			kfree(txx9_priv->mtdname);
 			kfree(txx9_priv);
 			continue;
 		}
@@ -385,6 +392,7 @@ static int __exit txx9ndfmc_remove(struct platform_device *dev)
 		kfree(drvdata->parts[i]);
 #endif
 		del_mtd_device(mtd);
+		kfree(txx9_priv->mtdname);
 		kfree(txx9_priv);
 	}
 	return 0;