[PATCH] OneNAND: Sync. Burst Read support

Add OneNAND Sync. Burst Read support
Tested with OMAP platform

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

3 files changed, 107 insertions, 4 deletions

diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 7d76ede984d..186ea9dc094 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -29,4 +29,10 @@ config MTD_ONENAND_OMAP
 	help
 	  Support for OneNAND flash on TI OMAP board.
 
+config MTD_ONENAND_SYNC_READ
+	bool "OneNAND Sync. Burst Read Support"
+	depends on ARCH_OMAP
+	help
+	  This enables support for Sync. Burst Read.
+
 endmenu
diff --git a/drivers/mtd/onenand/omap-onenand.c b/drivers/mtd/onenand/omap-onenand.c
index 56e1aec6b83..7c89549f7f5 100644
--- a/drivers/mtd/onenand/omap-onenand.c
+++ b/drivers/mtd/onenand/omap-onenand.c
@@ -25,9 +25,10 @@
 #include <asm/arch/hardware.h>
 #include <asm/arch/tc.h>
 #include <asm/sizes.h>
+#include <asm/mach-types.h>
 
 #define OMAP_ONENAND_FLASH_START1	OMAP_CS2A_PHYS
-#define OMAP_ONENAND_FLASH_START2	OMAP_CS0_PHYS
+#define OMAP_ONENAND_FLASH_START2	omap_cs3_phys()
 /*
  * MTD structure for OMAP board
  */
@@ -68,10 +69,66 @@ static struct mtd_partition static_partition[] = {
 	},
 };
 
-const char *part_probes[] = { "cmdlinepart", NULL,  };
+static const char *part_probes[] = { "cmdlinepart", NULL,  };
 
 #endif
 
+#ifdef CONFIG_MTD_ONENAND_SYNC_READ
+static unsigned int omap_emifs_cs;
+
+static void omap_find_emifs_cs(unsigned int addr)
+{
+	/* Check CS3 */
+	if (OMAP_EMIFS_CONFIG_REG & OMAP_EMIFS_CONFIG_BM && addr == 0x0) {
+		omap_emifs_cs = 3;
+	} else {
+		omap_emifs_cs = (addr >> 26);
+	}
+}
+
+/**
+ * omap_onenand_mmcontrol - Control OMAP EMIFS
+ */
+static void omap_onenand_mmcontrol(struct mtd_info *mtd, int sync_read)
+{
+	struct onenand_chip *this = mtd->priv;
+	static unsigned long omap_emifs_ccs, omap_emifs_acs;
+	static unsigned long onenand_sys_cfg1;
+	int config, emifs_ccs, emifs_acs;
+
+	if (sync_read) {
+		/*
+		 * Note: BRL and RDWST is equal
+		 */
+		omap_emifs_ccs = EMIFS_CCS(omap_emifs_cs);
+		omap_emifs_acs = EMIFS_ACS(omap_emifs_cs);
+		
+		emifs_ccs = 0x41141;
+		emifs_acs = 0x1;
+
+		/* OneNAND System Configuration 1 */
+		onenand_sys_cfg1 = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
+		config = (onenand_sys_cfg1
+			& ~(0x3f << ONENAND_SYS_CFG1_BL_SHIFT))
+			| ONENAND_SYS_CFG1_SYNC_READ
+			| ONENAND_SYS_CFG1_BRL_4
+			| ONENAND_SYS_CFG1_BL_8;
+	} else {
+		emifs_ccs = omap_emifs_ccs;
+		emifs_acs = omap_emifs_acs;
+		config = onenand_sys_cfg1;
+	}
+
+	this->write_word(config, this->base + ONENAND_REG_SYS_CFG1);
+	EMIFS_CCS(omap_emifs_cs) = emifs_ccs;
+	EMIFS_ACS(omap_emifs_cs) = emifs_acs;
+}
+#else
+#define omap_find_emifs_cs(x)		do { } while (0)
+#define omap_onenand_mmcontrol		NULL
+#endif
+
+
 /* Scan to find existance of the device at base.
    This also allocates oob and data internal buffers */
 static char onenand_name[] = "onenand";
@@ -102,14 +159,19 @@ static int __init omap_onenand_init (void)
 
 	/* Link the private data with the MTD structure */
 	omap_onenand_mtd->priv = this;
+	this->mmcontrol = omap_onenand_mmcontrol;
 
         /* try the first address */
 	this->base = ioremap(OMAP_ONENAND_FLASH_START1, SZ_128K);
+	omap_find_emifs_cs(OMAP_ONENAND_FLASH_START1);
+
 	omap_onenand_mtd->name = onenand_name;
 	if (onenand_scan(omap_onenand_mtd, 1)){
 		/* try the second address */
 		iounmap(this->base);
 		this->base = ioremap(OMAP_ONENAND_FLASH_START2, SZ_128K);
+		omap_find_emifs_cs(OMAP_ONENAND_FLASH_START2);
+
 		if (onenand_scan(omap_onenand_mtd, 1)) {
 			iounmap(this->base);
                         err = -ENXIO;
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index bcce22ae3cb..e8748950577 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -379,6 +379,35 @@ static int onenand_read_bufferram(struct mtd_info *mtd, int area,
 }
 
 /**
+ * onenand_sync_read_bufferram - [OneNAND Interface] Read the bufferram area with Sync. Burst mode
+ * @param mtd		MTD data structure
+ * @param area		BufferRAM area
+ * @param buffer	the databuffer to put/get data
+ * @param offset	offset to read from or write to
+ * @param count		number of bytes to read/write
+ *
+ * Read the BufferRAM area with Sync. Burst Mode
+ */
+static int onenand_sync_read_bufferram(struct mtd_info *mtd, int area,
+		unsigned char *buffer, int offset, size_t count)
+{
+	struct onenand_chip *this = mtd->priv;
+	void __iomem *bufferram;
+
+	bufferram = this->base + area;
+
+	bufferram += onenand_bufferram_offset(mtd, area);
+
+	this->mmcontrol(mtd, ONENAND_SYS_CFG1_SYNC_READ);
+
+	memcpy(buffer, bufferram + offset, count);
+
+	this->mmcontrol(mtd, 0);
+
+	return 0;
+}
+
+/**
  * onenand_write_bufferram - [OneNAND Interface] Write the bufferram area
  * @param mtd		MTD data structure
  * @param area		BufferRAM area
@@ -1273,8 +1302,8 @@ static int onenand_check_maf(int manuf)
                         break;
         }
 
-        printk(KERN_DEBUG "OneNAND Manufacturer: %s\n",
-                onenand_manuf_ids[i].name);
+        printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n",
+                onenand_manuf_ids[i].name, manuf);
 
         return (i != ONENAND_MFR_UNKNOWN);
 }
@@ -1385,6 +1414,12 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	if (onenand_probe(mtd))
 		return -ENXIO;
 
+	/* Set Sync. Burst Read after probing */
+	if (this->mmcontrol) {
+		printk(KERN_INFO "OneNAND Sync. Burst Read support\n");
+		this->read_bufferram = onenand_sync_read_bufferram;
+	}
+
 	this->state = FL_READY;
 	init_waitqueue_head(&this->wq);
 	spin_lock_init(&this->chip_lock);