diff options
| author | Patrick Ohly <patrick.ohly@intel.com> | 2009-02-12 05:03:43 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2009-02-15 23:13:27 -0800 |
| commit | 33af6bcc005a826726b48e8775df5d58112bc10b (patch) | |
| tree | f56d49b32b2183e076741b590bb7ebd797d53c99 /drivers/net/igb/e1000_regs.h | |
| parent | c6cb090ba7cd88aec03718dab76e4dad56862cae (diff) | |
igb: use timecompare to implement hardware time stamping
Both TX and RX hardware time stamping are implemented. Due to
hardware limitations it is not possible to verify reliably which
packet was time stamped when multiple were pending for sending; this
could be solved by only allowing one packet marked for hardware time
stamping into the queue (not implemented yet).
RX time stamping relies on the flag in the packet descriptor which
marks packets that were time stamped. In "all packet" mode this flag
is not set. TODO: also support that mode (even though it'll suffer
from race conditions).
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/igb/e1000_regs.h')
| -rw-r--r-- | drivers/net/igb/e1000_regs.h | 40 |
1 files changed, 40 insertions, 0 deletions
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h index 64d95cd71f2..1fb19ca081c 100644 --- a/drivers/net/igb/e1000_regs.h +++ b/drivers/net/igb/e1000_regs.h @@ -78,9 +78,37 @@ /* IEEE 1588 TIMESYNCH */ #define E1000_TSYNCTXCTL 0x0B614 +#define E1000_TSYNCTXCTL_VALID (1<<0) +#define E1000_TSYNCTXCTL_ENABLED (1<<4) #define E1000_TSYNCRXCTL 0x0B620 +#define E1000_TSYNCRXCTL_VALID (1<<0) +#define E1000_TSYNCRXCTL_ENABLED (1<<4) +enum { + E1000_TSYNCRXCTL_TYPE_L2_V2 = 0, + E1000_TSYNCRXCTL_TYPE_L4_V1 = (1<<1), + E1000_TSYNCRXCTL_TYPE_L2_L4_V2 = (1<<2), + E1000_TSYNCRXCTL_TYPE_ALL = (1<<3), + E1000_TSYNCRXCTL_TYPE_EVENT_V2 = (1<<3) | (1<<1), +}; #define E1000_TSYNCRXCFG 0x05F50 +enum { + E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE = 0<<0, + E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE = 1<<0, + E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE = 2<<0, + E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE = 3<<0, + E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE = 4<<0, + E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE = 0<<8, + E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE = 1<<8, + E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE = 2<<8, + E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE = 3<<8, + E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE = 8<<8, + E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE = 9<<8, + E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE = 0xA<<8, + E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE = 0xB<<8, + E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE = 0xC<<8, + E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE = 0xD<<8, +}; #define E1000_SYSTIML 0x0B600 #define E1000_SYSTIMH 0x0B604 #define E1000_TIMINCA 0x0B608 @@ -103,6 +131,18 @@ #define E1000_ETQF6 0x05CC8 #define E1000_ETQF7 0x05CCC +/* Filtering Registers */ +#define E1000_SAQF(_n) (0x5980 + 4 * (_n)) +#define E1000_DAQF(_n) (0x59A0 + 4 * (_n)) +#define E1000_SPQF(_n) (0x59C0 + 4 * (_n)) +#define E1000_FTQF(_n) (0x59E0 + 4 * (_n)) +#define E1000_SAQF0 E1000_SAQF(0) +#define E1000_DAQF0 E1000_DAQF(0) +#define E1000_SPQF0 E1000_SPQF(0) +#define E1000_FTQF0 E1000_FTQF(0) +#define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */ +#define E1000_ETQF(_n) (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */ + /* Split and Replication RX Control - RW */ /* * Convenience macros |