Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 2260 insertions, 0 deletions

diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
new file mode 100644
index 00000000000..85a15217314
--- /dev/null
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -0,0 +1,2260 @@
+/*======================================================================
+
+    A PCMCIA ethernet driver for SMC91c92-based cards.
+
+    This driver supports Megahertz PCMCIA ethernet cards; and
+    Megahertz, Motorola, Ositech, and Psion Dacom ethernet/modem
+    multifunction cards.
+
+    Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
+
+    smc91c92_cs.c 1.122 2002/10/25 06:26:39
+
+    This driver contains code written by Donald Becker
+    (becker@scyld.com), Rowan Hughes (x-csrdh@jcu.edu.au),
+    David Hinds (dahinds@users.sourceforge.net), and Erik Stahlman
+    (erik@vt.edu).  Donald wrote the SMC 91c92 code using parts of
+    Erik's SMC 91c94 driver.  Rowan wrote a similar driver, and I've
+    incorporated some parts of his driver here.  I (Dave) wrote most
+    of the PCMCIA glue code, and the Ositech support code.  Kelly
+    Stephens (kstephen@holli.com) added support for the Motorola
+    Mariner, with help from Allen Brost.
+
+    This software may be used and distributed according to the terms of
+    the GNU General Public License, incorporated herein by reference.
+
+======================================================================*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/crc32.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+/* Ositech Seven of Diamonds firmware */
+#include "ositech.h"
+
+/*====================================================================*/
+
+static char *if_names[] = { "auto", "10baseT", "10base2"};
+
+/* Module parameters */
+
+MODULE_DESCRIPTION("SMC 91c92 series PCMCIA ethernet driver");
+MODULE_LICENSE("GPL");
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
+
+/*
+  Transceiver/media type.
+   0 = auto
+   1 = 10baseT (and autoselect if #define AUTOSELECT),
+   2 = AUI/10base2,
+*/
+INT_MODULE_PARM(if_port, 0);
+
+#ifdef PCMCIA_DEBUG
+INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
+static const char *version =
+"smc91c92_cs.c 0.09 1996/8/4 Donald Becker, becker@scyld.com.\n";
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
+#else
+#define DEBUG(n, args...)
+#endif
+
+#define DRV_NAME	"smc91c92_cs"
+#define DRV_VERSION	"1.122"
+
+/*====================================================================*/
+
+/* Operational parameter that usually are not changed. */
+
+/* Time in jiffies before concluding Tx hung */
+#define TX_TIMEOUT		((400*HZ)/1000)
+
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+#define INTR_WORK		4
+
+/* Times to check the check the chip before concluding that it doesn't
+   currently have room for another Tx packet. */
+#define MEMORY_WAIT_TIME       	8
+
+static dev_info_t dev_info = "smc91c92_cs";
+
+static dev_link_t *dev_list;
+
+struct smc_private {
+    dev_link_t			link;
+    spinlock_t			lock;
+    u_short			manfid;
+    u_short			cardid;
+    struct net_device_stats	stats;
+    dev_node_t			node;
+    struct sk_buff		*saved_skb;
+    int				packets_waiting;
+    void			__iomem *base;
+    u_short			cfg;
+    struct timer_list		media;
+    int				watchdog, tx_err;
+    u_short			media_status;
+    u_short			fast_poll;
+    u_short			link_status;
+    struct mii_if_info		mii_if;
+    int				duplex;
+    int				rx_ovrn;
+};
+
+/* Special definitions for Megahertz multifunction cards */
+#define MEGAHERTZ_ISR		0x0380
+
+/* Special function registers for Motorola Mariner */
+#define MOT_LAN			0x0000
+#define MOT_UART		0x0020
+#define MOT_EEPROM		0x20
+
+#define MOT_NORMAL \
+(COR_LEVEL_REQ | COR_FUNC_ENA | COR_ADDR_DECODE | COR_IREQ_ENA)
+
+/* Special function registers for Ositech cards */
+#define OSITECH_AUI_CTL		0x0c
+#define OSITECH_PWRDOWN		0x0d
+#define OSITECH_RESET		0x0e
+#define OSITECH_ISR		0x0f
+#define OSITECH_AUI_PWR		0x0c
+#define OSITECH_RESET_ISR	0x0e
+
+#define OSI_AUI_PWR		0x40
+#define OSI_LAN_PWRDOWN		0x02
+#define OSI_MODEM_PWRDOWN	0x01
+#define OSI_LAN_RESET		0x02
+#define OSI_MODEM_RESET		0x01
+
+/* Symbolic constants for the SMC91c9* series chips, from Erik Stahlman. */
+#define	BANK_SELECT		14		/* Window select register. */
+#define SMC_SELECT_BANK(x)  { outw(x, ioaddr + BANK_SELECT); }
+
+/* Bank 0 registers. */
+#define	TCR 		0	/* transmit control register */
+#define	 TCR_CLEAR	0	/* do NOTHING */
+#define  TCR_ENABLE	0x0001	/* if this is 1, we can transmit */
+#define	 TCR_PAD_EN	0x0080	/* pads short packets to 64 bytes */
+#define  TCR_MONCSN	0x0400  /* Monitor Carrier. */
+#define  TCR_FDUPLX	0x0800  /* Full duplex mode. */
+#define	 TCR_NORMAL TCR_ENABLE | TCR_PAD_EN
+
+#define EPH		2	/* Ethernet Protocol Handler report. */
+#define  EPH_TX_SUC	0x0001
+#define  EPH_SNGLCOL	0x0002
+#define  EPH_MULCOL	0x0004
+#define  EPH_LTX_MULT	0x0008
+#define  EPH_16COL	0x0010
+#define  EPH_SQET	0x0020
+#define  EPH_LTX_BRD	0x0040
+#define  EPH_TX_DEFR	0x0080
+#define  EPH_LAT_COL	0x0200
+#define  EPH_LOST_CAR	0x0400
+#define  EPH_EXC_DEF	0x0800
+#define  EPH_CTR_ROL	0x1000
+#define  EPH_RX_OVRN	0x2000
+#define  EPH_LINK_OK	0x4000
+#define  EPH_TX_UNRN	0x8000
+#define MEMINFO		8	/* Memory Information Register */
+#define MEMCFG		10	/* Memory Configuration Register */
+
+/* Bank 1 registers. */
+#define CONFIG			0
+#define  CFG_MII_SELECT		0x8000	/* 91C100 only */
+#define  CFG_NO_WAIT		0x1000
+#define  CFG_FULL_STEP		0x0400
+#define  CFG_SET_SQLCH		0x0200
+#define  CFG_AUI_SELECT	 	0x0100
+#define  CFG_16BIT		0x0080
+#define  CFG_DIS_LINK		0x0040
+#define  CFG_STATIC		0x0030
+#define  CFG_IRQ_SEL_1		0x0004
+#define  CFG_IRQ_SEL_0		0x0002
+#define BASE_ADDR		2
+#define	ADDR0			4
+#define	GENERAL			10
+#define	CONTROL			12
+#define  CTL_STORE		0x0001
+#define  CTL_RELOAD		0x0002
+#define  CTL_EE_SELECT		0x0004
+#define  CTL_TE_ENABLE		0x0020
+#define  CTL_CR_ENABLE		0x0040
+#define  CTL_LE_ENABLE		0x0080
+#define  CTL_AUTO_RELEASE	0x0800
+#define	 CTL_POWERDOWN		0x2000
+
+/* Bank 2 registers. */
+#define MMU_CMD		0
+#define	 MC_ALLOC	0x20  	/* or with number of 256 byte packets */
+#define	 MC_RESET	0x40
+#define  MC_RELEASE  	0x80  	/* remove and release the current rx packet */
+#define  MC_FREEPKT  	0xA0  	/* Release packet in PNR register */
+#define  MC_ENQUEUE	0xC0 	/* Enqueue the packet for transmit */
+#define	PNR_ARR		2
+#define FIFO_PORTS	4
+#define  FP_RXEMPTY	0x8000
+#define	POINTER		6
+#define  PTR_AUTO_INC	0x0040
+#define  PTR_READ	0x2000
+#define	 PTR_AUTOINC 	0x4000
+#define	 PTR_RCV	0x8000
+#define	DATA_1		8
+#define	INTERRUPT	12
+#define  IM_RCV_INT		0x1
+#define	 IM_TX_INT		0x2
+#define	 IM_TX_EMPTY_INT	0x4
+#define	 IM_ALLOC_INT		0x8
+#define	 IM_RX_OVRN_INT		0x10
+#define	 IM_EPH_INT		0x20
+
+#define	RCR		4
+enum RxCfg { RxAllMulti = 0x0004, RxPromisc = 0x0002,
+	     RxEnable = 0x0100, RxStripCRC = 0x0200};
+#define  RCR_SOFTRESET	0x8000 	/* resets the chip */
+#define	 RCR_STRIP_CRC	0x200	/* strips CRC */
+#define  RCR_ENABLE	0x100	/* IFF this is set, we can receive packets */
+#define  RCR_ALMUL	0x4 	/* receive all multicast packets */
+#define	 RCR_PROMISC	0x2	/* enable promiscuous mode */
+
+/* the normal settings for the RCR register : */
+#define	 RCR_NORMAL	(RCR_STRIP_CRC | RCR_ENABLE)
+#define  RCR_CLEAR	0x0		/* set it to a base state */
+#define	COUNTER		6
+
+/* BANK 3 -- not the same values as in smc9194! */
+#define	MULTICAST0	0
+#define	MULTICAST2	2
+#define	MULTICAST4	4
+#define	MULTICAST6	6
+#define MGMT    	8
+#define REVISION	0x0a
+
+/* Transmit status bits. */
+#define TS_SUCCESS 0x0001
+#define TS_16COL   0x0010
+#define TS_LATCOL  0x0200
+#define TS_LOSTCAR 0x0400
+
+/* Receive status bits. */
+#define RS_ALGNERR	0x8000
+#define RS_BADCRC	0x2000
+#define RS_ODDFRAME	0x1000
+#define RS_TOOLONG	0x0800
+#define RS_TOOSHORT	0x0400
+#define RS_MULTICAST	0x0001
+#define RS_ERRORS	(RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
+
+#define set_bits(v, p) outw(inw(p)|(v), (p))
+#define mask_bits(v, p) outw(inw(p)&(v), (p))
+
+/*====================================================================*/
+
+static dev_link_t *smc91c92_attach(void);
+static void smc91c92_detach(dev_link_t *);
+static void smc91c92_config(dev_link_t *link);
+static void smc91c92_release(dev_link_t *link);
+static int smc91c92_event(event_t event, int priority,
+			  event_callback_args_t *args);
+
+static int smc_open(struct net_device *dev);
+static int smc_close(struct net_device *dev);
+static int smc_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void smc_tx_timeout(struct net_device *dev);
+static int smc_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static void smc_rx(struct net_device *dev);
+static struct net_device_stats *smc_get_stats(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+static int s9k_config(struct net_device *dev, struct ifmap *map);
+static void smc_set_xcvr(struct net_device *dev, int if_port);
+static void smc_reset(struct net_device *dev);
+static void media_check(u_long arg);
+static void mdio_sync(kio_addr_t addr);
+static int mdio_read(struct net_device *dev, int phy_id, int loc);
+static void mdio_write(struct net_device *dev, int phy_id, int loc, int value);
+static int smc_link_ok(struct net_device *dev);
+static struct ethtool_ops ethtool_ops;
+
+/*======================================================================
+
+  smc91c92_attach() creates an "instance" of the driver, allocating
+  local data structures for one device.  The device is registered
+  with Card Services.
+
+======================================================================*/
+
+static dev_link_t *smc91c92_attach(void)
+{
+    client_reg_t client_reg;
+    struct smc_private *smc;
+    dev_link_t *link;
+    struct net_device *dev;
+    int ret;
+
+    DEBUG(0, "smc91c92_attach()\n");
+
+    /* Create new ethernet device */
+    dev = alloc_etherdev(sizeof(struct smc_private));
+    if (!dev)
+	return NULL;
+    smc = netdev_priv(dev);
+    link = &smc->link;
+    link->priv = dev;
+
+    spin_lock_init(&smc->lock);
+    link->io.NumPorts1 = 16;
+    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+    link->io.IOAddrLines = 4;
+    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+    link->irq.Handler = &smc_interrupt;
+    link->irq.Instance = dev;
+    link->conf.Attributes = CONF_ENABLE_IRQ;
+    link->conf.Vcc = 50;
+    link->conf.IntType = INT_MEMORY_AND_IO;
+
+    /* The SMC91c92-specific entries in the device structure. */
+    SET_MODULE_OWNER(dev);
+    dev->hard_start_xmit = &smc_start_xmit;
+    dev->get_stats = &smc_get_stats;
+    dev->set_config = &s9k_config;
+    dev->set_multicast_list = &set_rx_mode;
+    dev->open = &smc_open;
+    dev->stop = &smc_close;
+    dev->do_ioctl = &smc_ioctl;
+    SET_ETHTOOL_OPS(dev, &ethtool_ops);
+#ifdef HAVE_TX_TIMEOUT
+    dev->tx_timeout = smc_tx_timeout;
+    dev->watchdog_timeo = TX_TIMEOUT;
+#endif
+
+    smc->mii_if.dev = dev;
+    smc->mii_if.mdio_read = mdio_read;
+    smc->mii_if.mdio_write = mdio_write;
+    smc->mii_if.phy_id_mask = 0x1f;
+    smc->mii_if.reg_num_mask = 0x1f;
+
+    /* Register with Card Services */
+    link->next = dev_list;
+    dev_list = link;
+    client_reg.dev_info = &dev_info;
+    client_reg.EventMask = CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+	CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+	CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+    client_reg.event_handler = &smc91c92_event;
+    client_reg.Version = 0x0210;
+    client_reg.event_callback_args.client_data = link;
+    ret = pcmcia_register_client(&link->handle, &client_reg);
+    if (ret != 0) {
+	cs_error(link->handle, RegisterClient, ret);
+	smc91c92_detach(link);
+	return NULL;
+    }
+
+    return link;
+} /* smc91c92_attach */
+
+/*======================================================================
+
+    This deletes a driver "instance".  The device is de-registered
+    with Card Services.  If it has been released, all local data
+    structures are freed.  Otherwise, the structures will be freed
+    when the device is released.
+
+======================================================================*/
+
+static void smc91c92_detach(dev_link_t *link)
+{
+    struct net_device *dev = link->priv;
+    dev_link_t **linkp;
+
+    DEBUG(0, "smc91c92_detach(0x%p)\n", link);
+
+    /* Locate device structure */
+    for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+	if (*linkp == link) break;
+    if (*linkp == NULL)
+	return;
+
+    if (link->dev)
+	unregister_netdev(dev);
+
+    if (link->state & DEV_CONFIG)
+	smc91c92_release(link);
+
+    if (link->handle)
+	pcmcia_deregister_client(link->handle);
+
+    /* Unlink device structure, free bits */
+    *linkp = link->next;
+    free_netdev(dev);
+} /* smc91c92_detach */
+
+/*====================================================================*/
+
+static int cvt_ascii_address(struct net_device *dev, char *s)
+{
+    int i, j, da, c;
+
+    if (strlen(s) != 12)
+	return -1;
+    for (i = 0; i < 6; i++) {
+	da = 0;
+	for (j = 0; j < 2; j++) {
+	    c = *s++;
+	    da <<= 4;
+	    da += ((c >= '0') && (c <= '9')) ?
+		(c - '0') : ((c & 0x0f) + 9);
+	}
+	dev->dev_addr[i] = da;
+    }
+    return 0;
+}
+
+/*====================================================================*/
+
+static int first_tuple(client_handle_t handle, tuple_t *tuple,
+		cisparse_t *parse)
+{
+	int i;
+
+	if ((i = pcmcia_get_first_tuple(handle, tuple)) != CS_SUCCESS ||
+			(i = pcmcia_get_tuple_data(handle, tuple)) != CS_SUCCESS)
+		return i;
+	return pcmcia_parse_tuple(handle, tuple, parse);
+}
+
+static int next_tuple(client_handle_t handle, tuple_t *tuple,
+		cisparse_t *parse)
+{
+	int i;
+
+	if ((i = pcmcia_get_next_tuple(handle, tuple)) != CS_SUCCESS ||
+			(i = pcmcia_get_tuple_data(handle, tuple)) != CS_SUCCESS)
+		return i;
+	return pcmcia_parse_tuple(handle, tuple, parse);
+}
+
+/*======================================================================
+
+    Configuration stuff for Megahertz cards
+
+    mhz_3288_power() is used to power up a 3288's ethernet chip.
+    mhz_mfc_config() handles socket setup for multifunction (1144
+    and 3288) cards.  mhz_setup() gets a card's hardware ethernet
+    address.
+
+======================================================================*/
+
+static int mhz_3288_power(dev_link_t *link)
+{
+    struct net_device *dev = link->priv;
+    struct smc_private *smc = netdev_priv(dev);
+    u_char tmp;
+
+    /* Read the ISR twice... */
+    readb(smc->base+MEGAHERTZ_ISR);
+    udelay(5);
+    readb(smc->base+MEGAHERTZ_ISR);
+
+    /* Pause 200ms... */
+    mdelay(200);
+
+    /* Now read and write the COR... */
+    tmp = readb(smc->base + link->conf.ConfigBase + CISREG_COR);
+    udelay(5);
+    writeb(tmp, smc->base + link->conf.ConfigBase + CISREG_COR);
+
+    return 0;
+}
+
+static int mhz_mfc_config(dev_link_t *link)
+{
+    struct net_device *dev = link->priv;
+    struct smc_private *smc = netdev_priv(dev);
+    tuple_t tuple;
+    cisparse_t parse;
+    u_char buf[255];
+    cistpl_cftable_entry_t *cf = &parse.cftable_entry;
+    win_req_t req;
+    memreq_t mem;
+    int i, k;
+
+    link->conf.Attributes |= CONF_ENABLE_SPKR;
+    link->conf.Status = CCSR_AUDIO_ENA;
+    link->irq.Attributes =
+	IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
+    link->io.IOAddrLines = 16;
+    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+    link->io.NumPorts2 = 8;
+
+    tuple.Attributes = tuple.TupleOffset = 0;
+    tuple.TupleData = (cisdata_t *)buf;
+    tuple.TupleDataMax = sizeof(buf);
+    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+
+    i = first_tuple(link->handle, &tuple, &parse);
+    /* The Megahertz combo cards have modem-like CIS entries, so
+       we have to explicitly try a bunch of port combinations. */
+    while (i == CS_SUCCESS) {
+	link->conf.ConfigIndex = cf->index;
+	link->io.BasePort2 = cf->io.win[0].base;
+	for (k = 0; k < 0x400; k += 0x10) {
+	    if (k & 0x80) continue;
+	    link->io.BasePort1 = k ^ 0x300;
+	    i = pcmcia_request_io(link->handle, &link->io);
+	    if (i == CS_SUCCESS) break;
+	}
+	if (i == CS_SUCCESS) break;
+	i = next_tuple(link->handle, &tuple, &parse);
+    }
+    if (i != CS_SUCCESS)
+	return i;
+    dev->base_addr = link->io.BasePort1;
+
+    /* Allocate a memory window, for accessing the ISR */
+    req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
+    req.Base = req.Size = 0;
+    req.AccessSpeed = 0;
+    i = pcmcia_request_window(&link->handle, &req, &link->win);
+    if (i != CS_SUCCESS)
+	return i;
+    smc->base = ioremap(req.Base, req.Size);
+    mem.CardOffset = mem.Page = 0;
+    if (smc->manfid == MANFID_MOTOROLA)
+	mem.CardOffset = link->conf.ConfigBase;
+    i = pcmcia_map_mem_page(link->win, &mem);
+
+    if ((i == CS_SUCCESS)
+	&& (smc->manfid == MANFID_MEGAHERTZ)
+	&& (smc->cardid == PRODID_MEGAHERTZ_EM3288))
+	mhz_3288_power(link);
+
+    return i;
+}
+
+static int mhz_setup(dev_link_t *link)
+{
+    client_handle_t handle = link->handle;
+    struct net_device *dev = link->priv;
+    tuple_t tuple;
+    cisparse_t parse;
+    u_char buf[255], *station_addr;
+
+    tuple.Attributes = tuple.TupleOffset = 0;
+    tuple.TupleData = buf;
+    tuple.TupleDataMax = sizeof(buf);
+
+    /* Read the station address from the CIS.  It is stored as the last
+       (fourth) string in the Version 1 Version/ID tuple. */
+    tuple.DesiredTuple = CISTPL_VERS_1;
+    if (first_tuple(handle, &tuple, &parse) != CS_SUCCESS)
+	return -1;
+    /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */
+    if (next_tuple(handle, &tuple, &parse) != CS_SUCCESS)
+	first_tuple(handle, &tuple, &parse);
+    if (parse.version_1.ns > 3) {
+	station_addr = parse.version_1.str + parse.version_1.ofs[3];
+	if (cvt_ascii_address(dev, station_addr) == 0)
+	    return 0;
+    }
+
+    /* Another possibility: for the EM3288, in a special tuple */
+    tuple.DesiredTuple = 0x81;
+    if (pcmcia_get_first_tuple(handle, &tuple) != CS_SUCCESS)
+	return -1;
+    if (pcmcia_get_tuple_data(handle, &tuple) != CS_SUCCESS)
+	return -1;
+    buf[12] = '\0';
+    if (cvt_ascii_address(dev, buf) == 0)
+	return 0;
+
+    return -1;
+}
+
+/*======================================================================
+
+    Configuration stuff for the Motorola Mariner
+
+    mot_config() writes directly to the Mariner configuration
+    registers because the CIS is just bogus.
+
+======================================================================*/
+
+static void mot_config(dev_link_t *link)
+{
+    struct net_device *dev = link->priv;
+    struct smc_private *smc = netdev_priv(dev);
+    kio_addr_t ioaddr = dev->base_addr;
+    kio_addr_t iouart = link->io.BasePort2;
+
+    /* Set UART base address and force map with COR bit 1 */
+    writeb(iouart & 0xff,        smc->base + MOT_UART + CISREG_IOBASE_0);
+    writeb((iouart >> 8) & 0xff, smc->base + MOT_UART + CISREG_IOBASE_1);
+    writeb(MOT_NORMAL,           smc->base + MOT_UART + CISREG_COR);
+
+    /* Set SMC base address and force map with COR bit 1 */
+    writeb(ioaddr & 0xff,        smc->base + MOT_LAN + CISREG_IOBASE_0);
+    writeb((ioaddr >> 8) & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_1);
+    writeb(MOT_NORMAL,           smc->base + MOT_LAN + CISREG_COR);
+
+    /* Wait for things to settle down */
+    mdelay(100);
+}
+
+static int mot_setup(dev_link_t *link)
+{
+    struct net_device *dev = link->priv;
+    kio_addr_t ioaddr = dev->base_addr;
+    int i, wait, loop;
+    u_int addr;
+
+    /* Read Ethernet address from Serial EEPROM */
+
+    for (i = 0; i < 3; i++) {
+	SMC_SELECT_BANK(2);
+	outw(MOT_EEPROM + i, ioaddr + POINTER);
+	SMC_SELECT_BANK(1);
+	outw((CTL_RELOAD | CTL_EE_SELECT), ioaddr + CONTROL);
+
+	for (loop = wait = 0; loop < 200; loop++) {
+	    udelay(10);
+	    wait = ((CTL_RELOAD | CTL_STORE) & inw(ioaddr + CONTROL));
+	    if (wait == 0) break;
+	}
+	
+	if (wait)
+	    return -1;
+	
+	addr = inw(ioaddr + GENERAL);
+	dev->dev_addr[2*i]   = addr & 0xff;
+	dev->dev_addr[2*i+1] = (addr >> 8) & 0xff;
+    }
+
+    return 0;
+}
+
+/*====================================================================*/
+
+static int smc_config(dev_link_t *link)
+{
+    struct net_device *dev = link->priv;
+    tuple_t tuple;
+    cisparse_t parse;
+    u_char buf[255];
+    cistpl_cftable_entry_t *cf = &parse.cftable_entry;
+    int i;
+
+    tuple.Attributes = tuple.TupleOffset = 0;
+    tuple.TupleData = (cisdata_t *)buf;
+    tuple.TupleDataMax = sizeof(buf);
+    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+
+    link->io.NumPorts1 = 16;
+    i = first_tuple(link->handle, &tuple, &parse);
+    while (i != CS_NO_MORE_ITEMS) {
+	if (i == CS_SUCCESS) {
+	    link->conf.ConfigIndex = cf->index;
+	    link->io.BasePort1 = cf->io.win[0].base;
+	    link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+	    i = pcmcia_request_io(link->handle, &link->io);
+	    if (i == CS_SUCCESS) break;
+	}
+	i = next_tuple(link->handle, &tuple, &parse);
+    }
+    if (i == CS_SUCCESS)
+	dev->base_addr = link->io.BasePort1;
+    return i;
+}
+
+static int smc_setup(dev_link_t *link)
+{
+    client_handle_t handle = link->handle;
+    struct net_device *dev = link->priv;
+    tuple_t tuple;
+    cisparse_t parse;
+    cistpl_lan_node_id_t *node_id;
+    u_char buf[255], *station_addr;
+    int i;
+
+    tuple.Attributes = tuple.TupleOffset = 0;
+    tuple.TupleData = buf;
+    tuple.TupleDataMax = sizeof(buf);
+
+    /* Check for a LAN function extension tuple */
+    tuple.DesiredTuple = CISTPL_FUNCE;
+    i = first_tuple(handle, &tuple, &parse);
+    while (i == CS_SUCCESS) {
+	if (parse.funce.type == CISTPL_FUNCE_LAN_NODE_ID)
+	    break;
+	i = next_tuple(handle, &tuple, &parse);
+    }
+    if (i == CS_SUCCESS) {
+	node_id = (cistpl_lan_node_id_t *)parse.funce.data;
+	if (node_id->nb == 6) {
+	    for (i = 0; i < 6; i++)
+		dev->dev_addr[i] = node_id->id[i];
+	    return 0;
+	}
+    }
+    /* Try the third string in the Version 1 Version/ID tuple. */
+    tuple.DesiredTuple = CISTPL_VERS_1;
+    if (first_tuple(handle, &tuple, &parse) != CS_SUCCESS)
+	return -1;
+    station_addr = parse.version_1.str + parse.version_1.ofs[2];
+    if (cvt_ascii_address(dev, station_addr) == 0)
+	return 0;
+
+    return -1;
+}
+
+/*====================================================================*/
+
+static int osi_config(dev_link_t *link)
+{
+    struct net_device *dev = link->priv;
+    static kio_addr_t com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
+    int i, j;
+
+    link->conf.Attributes |= CONF_ENABLE_SPKR;
+    link->conf.Status = CCSR_AUDIO_ENA;
+    link->irq.Attributes =
+	IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
+    link->io.NumPorts1 = 64;
+    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+    link->io.NumPorts2 = 8;
+    link->io.IOAddrLines = 16;
+
+    /* Enable Hard Decode, LAN, Modem */
+    link->conf.ConfigIndex = 0x23;
+
+    for (i = j = 0; j < 4; j++) {
+	link->io.BasePort2 = com[j];
+	i = pcmcia_request_io(link->handle, &link->io);
+	if (i == CS_SUCCESS) break;
+    }
+    if (i != CS_SUCCESS) {
+	/* Fallback: turn off hard decode */
+	link->conf.ConfigIndex = 0x03;
+	link->io.NumPorts2 = 0;
+	i = pcmcia_request_io(link->handle, &link->io);
+    }
+    dev->base_addr = link->io.BasePort1 + 0x10;
+    return i;
+}
+
+static int osi_setup(dev_link_t *link, u_short manfid, u_short cardid)
+{
+    client_handle_t handle = link->handle;
+    struct net_device *dev = link->priv;
+    tuple_t tuple;
+    u_char buf[255];
+    int i;
+
+    tuple.Attributes = TUPLE_RETURN_COMMON;
+    tuple.TupleData = buf;
+    tuple.TupleDataMax = sizeof(buf);
+    tuple.TupleOffset = 0;
+
+    /* Read the station address from tuple 0x90, subtuple 0x04 */
+    tuple.DesiredTuple = 0x90;
+    i = pcmcia_get_first_tuple(handle, &tuple);
+    while (i == CS_SUCCESS) {
+	i = pcmcia_get_tuple_data(handle, &tuple);
+	if ((i != CS_SUCCESS) || (buf[0] == 0x04))
+	    break;
+	i = pcmcia_get_next_tuple(handle, &tuple);
+    }
+    if (i != CS_SUCCESS)
+	return -1;
+    for (i = 0; i < 6; i++)
+	dev->dev_addr[i] = buf[i+2];
+
+    if (((manfid == MANFID_OSITECH) &&
+	 (cardid == PRODID_OSITECH_SEVEN)) ||
+	((manfid == MANFID_PSION) &&
+	 (cardid == PRODID_PSION_NET100))) {
+	/* Download the Seven of Diamonds firmware */
+	for (i = 0; i < sizeof(__Xilinx7OD); i++) {
+	    outb(__Xilinx7OD[i], link->io.BasePort1+2);
+	    udelay(50);
+	}
+    } else if (manfid == MANFID_OSITECH) {
+	/* Make sure both functions are powered up */
+	set_bits(0x300, link->io.BasePort1 + OSITECH_AUI_PWR);
+	/* Now, turn on the interrupt for both card functions */
+	set_bits(0x300, link->io.BasePort1 + OSITECH_RESET_ISR);
+	DEBUG(2, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
+	      inw(link->io.BasePort1 + OSITECH_AUI_PWR),
+	      inw(link->io.BasePort1 + OSITECH_RESET_ISR));
+    }
+
+    return 0;
+}
+
+/*======================================================================
+
+    This verifies that the chip is some SMC91cXX variant, and returns
+    the revision code if successful.  Otherwise, it returns -ENODEV.
+
+======================================================================*/
+
+static int check_sig(dev_link_t *link)
+{
+    struct net_device *dev = link->priv;
+    kio_addr_t ioaddr = dev->base_addr;
+    int width;
+    u_short s;
+
+    SMC_SELECT_BANK(1);
+    if (inw(ioaddr + BANK_SELECT) >> 8 != 0x33) {
+	/* Try powering up the chip */
+	outw(0, ioaddr + CONTROL);
+	mdelay(55);
+    }
+
+    /* Try setting bus width */
+    width = (link->io.Attributes1 == IO_DATA_PATH_WIDTH_AUTO);
+    s = inb(ioaddr + CONFIG);
+    if (width)
+	s |= CFG_16BIT;
+    else
+	s &= ~CFG_16BIT;
+    outb(s, ioaddr + CONFIG);
+
+    /* Check Base Address Register to make sure bus width is OK */
+    s = inw(ioaddr + BASE_ADDR);
+    if ((inw(ioaddr + BANK_SELECT) >> 8 == 0x33) &&
+	((s >> 8) != (s & 0xff))) {
+	SMC_SELECT_BANK(3);
+	s = inw(ioaddr + REVISION);
+	return (s & 0xff);
+    }
+
+    if (width) {
+	event_callback_args_t args;
+	printk(KERN_INFO "smc91c92_cs: using 8-bit IO window.\n");
+	args.client_data = link;
+	smc91c92_event(CS_EVENT_RESET_PHYSICAL, 0, &args);
+	pcmcia_release_io(link->handle, &link->io);
+	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+	pcmcia_request_io(link->handle, &link->io);
+	smc91c92_event(CS_EVENT_CARD_RESET, 0, &args);
+	return check_sig(link);
+    }
+    return -ENODEV;
+}
+
+/*======================================================================
+
+    smc91c92_config() is scheduled to run after a CARD_INSERTION event
+    is received, to configure the PCMCIA socket, and to make the
+    ethernet device available to the system.
+
+======================================================================*/
+
+#define CS_EXIT_TEST(ret, svc, label) \
+if (ret != CS_SUCCESS) { cs_error(link->handle, svc, ret); goto label; }
+
+static void smc91c92_config(dev_link_t *link)
+{
+    client_handle_t handle = link->handle;
+    struct net_device *dev = link->priv;
+    struct smc_private *smc = netdev_priv(dev);
+    tuple_t tuple;
+    cisparse_t parse;
+    u_short buf[32];
+    char *name;
+    int i, j, rev;
+    kio_addr_t ioaddr;
+    u_long mir;
+
+    DEBUG(0, "smc91c92_config(0x%p)\n", link);
+
+    tuple.Attributes = tuple.TupleOffset = 0;
+    tuple.TupleData = (cisdata_t *)buf;
+    tuple.TupleDataMax = sizeof(buf);
+
+    tuple.DesiredTuple = CISTPL_CONFIG;
+    i = first_tuple(handle, &tuple, &parse);
+    CS_EXIT_TEST(i, ParseTuple, config_failed);
+    link->conf.ConfigBase = parse.config.base;
+    link->conf.Present = parse.config.rmask[0];
+
+    tuple.DesiredTuple = CISTPL_MANFID;
+    tuple.Attributes = TUPLE_RETURN_COMMON;
+    if (first_tuple(handle, &tuple, &parse) == CS_SUCCESS) {
+	smc->manfid = parse.manfid.manf;
+	smc->cardid = parse.manfid.card;
+    }
+
+    /* Configure card */
+    link->state |= DEV_CONFIG;
+
+    if ((smc->manfid == MANFID_OSITECH) &&
+	(smc->cardid != PRODID_OSITECH_SEVEN)) {
+	i = osi_config(link);
+    } else if ((smc->manfid == MANFID_MOTOROLA) ||
+	       ((smc->manfid == MANFID_MEGAHERTZ) &&
+		((smc->cardid == PRODID_MEGAHERTZ_VARIOUS) ||
+		 (smc->cardid == PRODID_MEGAHERTZ_EM3288)))) {
+	i = mhz_mfc_config(link);
+    } else {
+	i = smc_config(link);
+    }
+    CS_EXIT_TEST(i, RequestIO, config_failed);
+
+    i = pcmcia_request_irq(link->handle, &link->irq);
+    CS_EXIT_TEST(i, RequestIRQ, config_failed);
+    i = pcmcia_request_configuration(link->handle, &link->conf);
+    CS_EXIT_TEST(i, RequestConfiguration, config_failed);
+
+    if (smc->manfid == MANFID_MOTOROLA)
+	mot_config(link);
+
+    dev->irq = link->irq.AssignedIRQ;
+
+    if ((if_port >= 0) && (if_port <= 2))
+	dev->if_port = if_port;
+    else
+	printk(KERN_NOTICE "smc91c92_cs: invalid if_port requested\n");
+
+    switch (smc->manfid) {
+    case MANFID_OSITECH:
+    case MANFID_PSION:
+	i = osi_setup(link, smc->manfid, smc->cardid); break;
+    case MANFID_SMC:
+    case MANFID_NEW_MEDIA:
+	i = smc_setup(link); break;
+    case 0x128: /* For broken Megahertz cards */
+    case MANFID_MEGAHERTZ:
+	i = mhz_setup(link); break;
+    case MANFID_MOTOROLA:
+    default: /* get the hw address from EEPROM */
+	i = mot_setup(link); break;
+    }
+
+    if (i != 0) {
+	printk(KERN_NOTICE "smc91c92_cs: Unable to find hardware address.\n");
+	goto config_undo;
+    }
+
+    smc->duplex = 0;
+    smc->rx_ovrn = 0;
+
+    rev = check_sig(link);
+    name = "???";
+    if (rev > 0)
+	switch (rev >> 4) {
+	case 3: name = "92"; break;
+	case 4: name = ((rev & 15) >= 6) ? "96" : "94"; break;
+	case 5: name = "95"; break;
+	case 7: name = "100"; break;
+	case 8: name = "100-FD"; break;
+	case 9: name = "110"; break;
+	}
+
+    ioaddr = dev->base_addr;
+    if (rev > 0) {
+	u_long mcr;
+	SMC_SELECT_BANK(0);
+	mir = inw(ioaddr + MEMINFO) & 0xff;
+	if (mir == 0xff) mir++;
+	/* Get scale factor for memory size */
+	mcr = ((rev >> 4) > 3) ? inw(ioaddr + MEMCFG) : 0x0200;
+	mir *= 128 * (1<<((mcr >> 9) & 7));
+	SMC_SELECT_BANK(1);
+	smc->cfg = inw(ioaddr + CONFIG) & ~CFG_AUI_SELECT;
+	smc->cfg |= CFG_NO_WAIT | CFG_16BIT | CFG_STATIC;
+	if (smc->manfid == MANFID_OSITECH)
+	    smc->cfg |= CFG_IRQ_SEL_1 | CFG_IRQ_SEL_0;
+	if ((rev >> 4) >= 7)
+	    smc->cfg |= CFG_MII_SELECT;
+    } else
+	mir = 0;
+
+    if (smc->cfg & CFG_MII_SELECT) {
+	SMC_SELECT_BANK(3);
+
+	for (i = 0; i < 32; i++) {
+	    j = mdio_read(dev, i, 1);
+	    if ((j != 0) && (j != 0xffff)) break;
+	}
+	smc->mii_if.phy_id = (i < 32) ? i : -1;
+
+	SMC_SELECT_BANK(0);
+    }
+
+    link->dev = &smc->node;
+    link->state &= ~DEV_CONFIG_PENDING;
+    SET_NETDEV_DEV(dev, &handle_to_dev(handle));
+
+    if (register_netdev(dev) != 0) {
+	printk(KERN_ERR "smc91c92_cs: register_netdev() failed\n");
+	link->dev = NULL;
+	goto config_undo;
+    }
+
+    strcpy(smc->node.dev_name, dev->name);
+
+    printk(KERN_INFO "%s: smc91c%s rev %d: io %#3lx, irq %d, "
+	   "hw_addr ", dev->name, name, (rev & 0x0f), dev->base_addr,
+	   dev->irq);
+    for (i = 0; i < 6; i++)
+	printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
+
+    if (rev > 0) {
+	if (mir & 0x3ff)
+	    printk(KERN_INFO "  %lu byte", mir);
+	else
+	    printk(KERN_INFO "  %lu kb", mir>>10);
+	printk(" buffer, %s xcvr\n", (smc->cfg & CFG_MII_SELECT) ?
+	       "MII" : if_names[dev->if_port]);
+    }
+
+    if (smc->cfg & CFG_MII_SELECT) {
+	if (smc->mii_if.phy_id != -1) {
+	    DEBUG(0, "  MII transceiver at index %d, status %x.\n",
+		  smc->mii_if.phy_id, j);
+	} else {
+    	    printk(KERN_NOTICE "  No MII transceivers found!\n");
+	}
+    }
+
+    return;
+
+config_undo:
+    unregister_netdev(dev);
+config_failed:			/* CS_EXIT_TEST() calls jump to here... */
+    smc91c92_release(link);
+    link->state &= ~DEV_CONFIG_PENDING;
+
+} /* smc91c92_config */
+
+/*======================================================================
+
+    After a card is removed, smc91c92_release() will unregister the net
+    device, and release the PCMCIA configuration.  If the device is
+    still open, this will be postponed until it is closed.
+
+======================================================================*/
+
+static void smc91c92_release(dev_link_t *link)
+{
+
+    DEBUG(0, "smc91c92_release(0x%p)\n", link);
+
+    pcmcia_release_configuration(link->handle);
+    pcmcia_release_io(link->handle, &link->io);
+    pcmcia_release_irq(link->handle, &link->irq);
+    if (link->win) {
+	struct net_device *dev = link->priv;
+	struct smc_private *smc = netdev_priv(dev);
+	iounmap(smc->base);
+	pcmcia_release_window(link->win);
+    }
+
+    link->state &= ~DEV_CONFIG;
+}
+
+/*======================================================================
+
+    The card status event handler.  Mostly, this schedules other
+    stuff to run after an event is received.  A CARD_REMOVAL event
+    also sets some flags to discourage the net drivers from trying
+    to talk to the card any more.
+
+======================================================================*/
+
+static int smc91c92_event(event_t event, int priority,
+			  event_callback_args_t *args)
+{
+    dev_link_t *link = args->client_data;
+    struct net_device *dev = link->priv;
+    struct smc_private *smc = netdev_priv(dev);
+    int i;
+
+    DEBUG(1, "smc91c92_event(0x%06x)\n", event);
+
+    switch (event) {
+    case CS_EVENT_CARD_REMOVAL:
+	link->state &= ~DEV_PRESENT;
+	if (link->state & DEV_CONFIG)
+	    netif_device_detach(dev);
+	break;
+    case CS_EVENT_CARD_INSERTION:
+	link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+	smc91c92_config(link);
+	break;
+    case CS_EVENT_PM_SUSPEND:
+	link->state |= DEV_SUSPEND;
+	/* Fall through... */
+    case CS_EVENT_RESET_PHYSICAL:
+	if (link->state & DEV_CONFIG) {
+	    if (link->open)
+		netif_device_detach(dev);
+	    pcmcia_release_configuration(link->handle);
+	}
+	break;
+    case CS_EVENT_PM_RESUME:
+	link->state &= ~DEV_SUSPEND;
+	/* Fall through... */
+    case CS_EVENT_CARD_RESET:
+	if (link->state & DEV_CONFIG) {
+	    if ((smc->manfid == MANFID_MEGAHERTZ) &&
+		(smc->cardid == PRODID_MEGAHERTZ_EM3288))
+		mhz_3288_power(link);
+	    pcmcia_request_configuration(link->handle, &link->conf);
+	    if (smc->manfid == MANFID_MOTOROLA)
+		mot_config(link);
+	    if ((smc->manfid == MANFID_OSITECH) &&
+		(smc->cardid != PRODID_OSITECH_SEVEN)) {
+		/* Power up the card and enable interrupts */
+		set_bits(0x0300, dev->base_addr-0x10+OSITECH_AUI_PWR);
+		set_bits(0x0300, dev->base_addr-0x10+OSITECH_RESET_ISR);
+	    }
+	    if (((smc->manfid == MANFID_OSITECH) &&
+	 	(smc->cardid == PRODID_OSITECH_SEVEN)) ||
+		((smc->manfid == MANFID_PSION) &&
+	 	(smc->cardid == PRODID_PSION_NET100))) {
+		/* Download the Seven of Diamonds firmware */
+		for (i = 0; i < sizeof(__Xilinx7OD); i++) {
+	    	    outb(__Xilinx7OD[i], link->io.BasePort1+2);
+	   	    udelay(50);
+		}
+	    }
+	    if (link->open) {
+		smc_reset(dev);
+		netif_device_attach(dev);
+	    }
+	}
+	break;
+    }
+    return 0;
+} /* smc91c92_event */
+
+/*======================================================================
+
+    MII interface support for SMC91cXX based cards
+======================================================================*/
+
+#define MDIO_SHIFT_CLK		0x04
+#define MDIO_DATA_OUT		0x01
+#define MDIO_DIR_WRITE		0x08
+#define MDIO_DATA_WRITE0	(MDIO_DIR_WRITE)
+#define MDIO_DATA_WRITE1	(MDIO_DIR_WRITE | MDIO_DATA_OUT)
+#define MDIO_DATA_READ		0x02
+
+static void mdio_sync(kio_addr_t addr)
+{
+    int bits;
+    for (bits = 0; bits < 32; bits++) {
+	outb(MDIO_DATA_WRITE1, addr);
+	outb(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr);
+    }
+}
+
+static int mdio_read(struct net_device *dev, int phy_id, int loc)
+{
+    kio_addr_t addr = dev->base_addr + MGMT;
+    u_int cmd = (0x06<<10)|(phy_id<<5)|loc;
+    int i, retval = 0;
+
+    mdio_sync(addr);
+    for (i = 13; i >= 0; i--) {
+	int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
+	outb(dat, addr);
+	outb(dat | MDIO_SHIFT_CLK, addr);
+    }
+    for (i = 19; i > 0; i--) {
+	outb(0, addr);
+	retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0);
+	outb(MDIO_SHIFT_CLK, addr);
+    }
+    return (retval>>1) & 0xffff;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
+{
+    kio_addr_t addr = dev->base_addr + MGMT;
+    u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value;
+    int i;
+
+    mdio_sync(addr);
+    for (i = 31; i >= 0; i--) {
+	int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
+	outb(dat, addr);
+	outb(dat | MDIO_SHIFT_CLK, addr);
+    }
+    for (i = 1; i >= 0; i--) {
+	outb(0, addr);
+	outb(MDIO_SHIFT_CLK, addr);
+    }
+}
+
+/*======================================================================
+
+    The driver core code, most of which should be common with a
+    non-PCMCIA implementation.
+
+======================================================================*/
+
+#ifdef PCMCIA_DEBUG
+static void smc_dump(struct net_device *dev)
+{
+    kio_addr_t ioaddr = dev->base_addr;
+    u_short i, w, save;
+    save = inw(ioaddr + BANK_SELECT);
+    for (w = 0; w < 4; w++) {
+	SMC_SELECT_BANK(w);
+	printk(KERN_DEBUG "bank %d: ", w);
+	for (i = 0; i < 14; i += 2)
+	    printk(" %04x", inw(ioaddr + i));
+	printk("\n");
+    }
+    outw(save, ioaddr + BANK_SELECT);
+}
+#endif
+
+static int smc_open(struct net_device *dev)
+{
+    struct smc_private *smc = netdev_priv(dev);
+    dev_link_t *link = &smc->link;
+
+#ifdef PCMCIA_DEBUG
+    DEBUG(0, "%s: smc_open(%p), ID/Window %4.4x.\n",
+	  dev->name, dev, inw(dev->base_addr + BANK_SELECT));
+    if (pc_debug > 1) smc_dump(dev);
+#endif
+
+    /* Check that the PCMCIA card is still here. */
+    if (!DEV_OK(link))
+	return -ENODEV;
+    /* Physical device present signature. */
+    if (check_sig(link) < 0) {
+	printk("smc91c92_cs: Yikes!  Bad chip signature!\n");
+	return -ENODEV;
+    }
+    link->open++;
+
+    netif_start_queue(dev);
+    smc->saved_skb = NULL;
+    smc->packets_waiting = 0;
+
+    smc_reset(dev);
+    init_timer(&smc->media);
+    smc->media.function = &media_check;
+    smc->media.data = (u_long) dev;
+    smc->media.expires = jiffies + HZ;
+    add_timer(&smc->media);
+
+    return 0;
+} /* smc_open */
+
+/*====================================================================*/
+
+static int smc_close(struct net_device *dev)
+{
+    struct smc_private *smc = netdev_priv(dev);
+    dev_link_t *link = &smc->link;
+    kio_addr_t ioaddr = dev->base_addr;
+
+    DEBUG(0, "%s: smc_close(), status %4.4x.\n",
+	  dev->name, inw(ioaddr + BANK_SELECT));
+
+    netif_stop_queue(dev);
+
+    /* Shut off all interrupts, and turn off the Tx and Rx sections.
+       Don't bother to check for chip present. */
+    SMC_SELECT_BANK(2);	/* Nominally paranoia, but do no assume... */
+    outw(0, ioaddr + INTERRUPT);
+    SMC_SELECT_BANK(0);
+    mask_bits(0xff00, ioaddr + RCR);
+    mask_bits(0xff00, ioaddr + TCR);
+
+    /* Put the chip into power-down mode. */
+    SMC_SELECT_BANK(1);
+    outw(CTL_POWERDOWN, ioaddr + CONTROL );
+
+    link->open--;
+    del_timer_sync(&smc->media);
+
+    return 0;
+} /* smc_close */
+
+/*======================================================================
+
+   Transfer a packet to the hardware and trigger the packet send.
+   This may be called at either from either the Tx queue code
+   or the interrupt handler.
+
+======================================================================*/
+
+static void smc_hardware_send_packet(struct net_device * dev)
+{
+    struct smc_private *smc = netdev_priv(dev);
+    struct sk_buff *skb = smc->saved_skb;
+    kio_addr_t ioaddr = dev->base_addr;
+    u_char packet_no;
+
+    if (!skb) {
+	printk(KERN_ERR "%s: In XMIT with no packet to send.\n", dev->name);
+	return;
+    }
+
+    /* There should be a packet slot waiting. */
+    packet_no = inw(ioaddr + PNR_ARR) >> 8;
+    if (packet_no & 0x80) {
+	/* If not, there is a hardware problem!  Likely an ejected card. */
+	printk(KERN_WARNING "%s: 91c92 hardware Tx buffer allocation"
+	       " failed, status %#2.2x.\n", dev->name, packet_no);
+	dev_kfree_skb_irq(skb);
+	smc->saved_skb = NULL;
+	netif_start_queue(dev);
+	return;
+    }
+
+    smc->stats.tx_bytes += skb->len;
+    /* The card should use the just-allocated buffer. */
+    outw(packet_no, ioaddr + PNR_ARR);
+    /* point to the beginning of the packet */
+    outw(PTR_AUTOINC , ioaddr + POINTER);
+
+    /* Send the packet length (+6 for status, length and ctl byte)
+       and the status word (set to zeros). */
+    {
+	u_char *buf = skb->data;
+	u_int length = skb->len; /* The chip will pad to ethernet min. */
+
+	DEBUG(2, "%s: Trying to xmit packet of length %d.\n",
+	      dev->name, length);
+	
+	/* send the packet length: +6 for status word, length, and ctl */
+	outw(0, ioaddr + DATA_1);
+	outw(length + 6, ioaddr + DATA_1);
+	outsw(ioaddr + DATA_1, buf, length >> 1);
+	
+	/* The odd last byte, if there is one, goes in the control word. */
+	outw((length & 1) ? 0x2000 | buf[length-1] : 0, ioaddr + DATA_1);
+    }
+
+    /* Enable the Tx interrupts, both Tx (TxErr) and TxEmpty. */
+    outw(((IM_TX_INT|IM_TX_EMPTY_INT)<<8) |
+	 (inw(ioaddr + INTERRUPT) & 0xff00),
+	 ioaddr + INTERRUPT);
+
+    /* The chip does the rest of the work. */
+    outw(MC_ENQUEUE , ioaddr + MMU_CMD);
+
+    smc->saved_skb = NULL;
+    dev_kfree_skb_irq(skb);
+    dev->trans_start = jiffies;
+    netif_start_queue(dev);
+    return;
+}
+
+/*====================================================================*/
+
+static void smc_tx_timeout(struct net_device *dev)
+{
+    struct smc_private *smc = netdev_priv(dev);
+    kio_addr_t ioaddr = dev->base_addr;
+
+    printk(KERN_NOTICE "%s: SMC91c92 transmit timed out, "
+	   "Tx_status %2.2x status %4.4x.\n",
+	   dev->name, inw(ioaddr)&0xff, inw(ioaddr + 2));
+    smc->stats.tx_errors++;
+    smc_reset(dev);
+    dev->trans_start = jiffies;
+    smc->saved_skb = NULL;
+    netif_wake_queue(dev);
+}
+
+static int smc_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+    struct smc_private *smc = netdev_priv(dev);
+    kio_addr_t ioaddr = dev->base_addr;
+    u_short num_pages;
+    short time_out, ir;
+
+    netif_stop_queue(dev);
+
+    DEBUG(2, "%s: smc_start_xmit(length = %d) called,"
+	  " status %4.4x.\n", dev->name, skb->len, inw(ioaddr + 2));
+
+    if (smc->saved_skb) {
+	/* THIS SHOULD NEVER HAPPEN. */
+	smc->stats.tx_aborted_errors++;
+	printk(KERN_DEBUG "%s: Internal error -- sent packet while busy.\n",
+	       dev->name);
+	return 1;
+    }
+    smc->saved_skb = skb;
+
+    num_pages = skb->len >> 8;
+
+    if (num_pages > 7) {
+	printk(KERN_ERR "%s: Far too big packet error.\n", dev->name);
+	dev_kfree_skb (skb);
+	smc->saved_skb = NULL;
+	smc->stats.tx_dropped++;
+	return 0;		/* Do not re-queue this packet. */
+    }
+    /* A packet is now waiting. */
+    smc->packets_waiting++;
+
+    SMC_SELECT_BANK(2);	/* Paranoia, we should always be in window 2 */
+
+    /* need MC_RESET to keep the memory consistent. errata? */
+    if (smc->rx_ovrn) {
+	outw(MC_RESET, ioaddr + MMU_CMD);
+	smc->rx_ovrn = 0;
+    }
+
+    /* Allocate the memory; send the packet now if we win. */
+    outw(MC_ALLOC | num_pages, ioaddr + MMU_CMD);
+    for (time_out = MEMORY_WAIT_TIME; time_out >= 0; time_out--) {
+	ir = inw(ioaddr+INTERRUPT);
+	if (ir & IM_ALLOC_INT) {
+	    /* Acknowledge the interrupt, send the packet. */
+	    outw((ir&0xff00) | IM_ALLOC_INT, ioaddr + INTERRUPT);
+	    smc_hardware_send_packet(dev);	/* Send the packet now.. */
+	    return 0;
+	}
+    }
+
+    /* Otherwise defer until the Tx-space-allocated interrupt. */
+    DEBUG(2, "%s: memory allocation deferred.\n", dev->name);
+    outw((IM_ALLOC_INT << 8) | (ir & 0xff00), ioaddr + INTERRUPT);
+
+    return 0;
+}
+
+/*======================================================================
+
+    Handle a Tx anomolous event.  Entered while in Window 2.
+
+======================================================================*/
+
+static void smc_tx_err(struct net_device * dev)
+{
+    struct smc_private *smc = netdev_priv(dev);
+    kio_addr_t ioaddr = dev->base_addr;
+    int saved_packet = inw(ioaddr + PNR_ARR) & 0xff;
+    int packet_no = inw(ioaddr + FIFO_PORTS) & 0x7f;
+    int tx_status;
+
+    /* select this as the packet to read from */
+    outw(packet_no, ioaddr + PNR_ARR);
+
+    /* read the first word from this packet */
+    outw(PTR_AUTOINC | PTR_READ | 0, ioaddr + POINTER);
+
+    tx_status = inw(ioaddr + DATA_1);
+
+    smc->stats.tx_errors++;
+    if (tx_status & TS_LOSTCAR) smc->stats.tx_carrier_errors++;
+    if (tx_status & TS_LATCOL)  smc->stats.tx_window_errors++;
+    if (tx_status & TS_16COL) {
+	smc->stats.tx_aborted_errors++;
+	smc->tx_err++;
+    }
+
+    if (tx_status & TS_SUCCESS) {
+	printk(KERN_NOTICE "%s: Successful packet caused error "
+	       "interrupt?\n", dev->name);
+    }
+    /* re-enable transmit */
+    SMC_SELECT_BANK(0);
+    outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR);
+    SMC_SELECT_BANK(2);
+
+    outw(MC_FREEPKT, ioaddr + MMU_CMD); 	/* Free the packet memory. */
+
+    /* one less packet waiting for me */
+    smc->packets_waiting--;
+
+    outw(saved_packet, ioaddr + PNR_ARR);
+    return;
+}
+
+/*====================================================================*/
+
+static void smc_eph_irq(struct net_device *dev)
+{
+    struct smc_private *smc = netdev_priv(dev);
+    kio_addr_t ioaddr = dev->base_addr;
+    u_short card_stats, ephs;
+
+    SMC_SELECT_BANK(0);
+    ephs = inw(ioaddr + EPH);
+    DEBUG(2, "%s: Ethernet protocol handler interrupt, status"
+	  " %4.4x.\n", dev->name, ephs);
+    /* Could be a counter roll-over warning: update stats. */
+    card_stats = inw(ioaddr + COUNTER);
+    /* single collisions */
+    smc->stats.collisions += card_stats & 0xF;
+    card_stats >>= 4;
+    /* multiple collisions */
+    smc->stats.collisions += card_stats & 0xF;
+#if 0 		/* These are for when linux supports these statistics */
+    card_stats >>= 4;			/* deferred */
+    card_stats >>= 4;			/* excess deferred */
+#endif
+    /* If we had a transmit error we must re-enable the transmitter. */
+    outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR);
+
+    /* Clear a link error interrupt. */
+    SMC_SELECT_BANK(1);
+    outw(CTL_AUTO_RELEASE | 0x0000, ioaddr + CONTROL);
+    outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE,
+	 ioaddr + CONTROL);
+    SMC_SELECT_BANK(2);
+}
+
+/*====================================================================*/
+
+static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+    struct net_device *dev = dev_id;
+    struct smc_private *smc = netdev_priv(dev);
+    kio_addr_t ioaddr;
+    u_short saved_bank, saved_pointer, mask, status;
+    unsigned int handled = 1;
+    char bogus_cnt = INTR_WORK;		/* Work we are willing to do. */
+
+    if (!netif_device_present(dev))
+	return IRQ_NONE;
+
+    ioaddr = dev->base_addr;
+
+    DEBUG(3, "%s: SMC91c92 interrupt %d at %#x.\n", dev->name,
+	  irq, ioaddr);
+
+    smc->watchdog = 0;
+    saved_bank = inw(ioaddr + BANK_SELECT);
+    if ((saved_bank & 0xff00) != 0x3300) {
+	/* The device does not exist -- the card could be off-line, or
+	   maybe it has been ejected. */
+	DEBUG(1, "%s: SMC91c92 interrupt %d for non-existent"
+	      "/ejected device.\n", dev->name, irq);
+	handled = 0;
+	goto irq_done;
+    }
+
+    SMC_SELECT_BANK(2);
+    saved_pointer = inw(ioaddr + POINTER);
+    mask = inw(ioaddr + INTERRUPT) >> 8;
+    /* clear all interrupts */
+    outw(0, ioaddr + INTERRUPT);
+
+    do { /* read the status flag, and mask it */
+	status = inw(ioaddr + INTERRUPT) & 0xff;
+	DEBUG(3, "%s: Status is %#2.2x (mask %#2.2x).\n", dev->name,
+	      status, mask);
+	if ((status & mask) == 0) {
+	    if (bogus_cnt == INTR_WORK)
+		handled = 0;
+	    break;
+	}
+	if (status & IM_RCV_INT) {
+	    /* Got a packet(s). */
+	    smc_rx(dev);
+	}
+	if (status & IM_TX_INT) {
+	    smc_tx_err(dev);
+	    outw(IM_TX_INT, ioaddr + INTERRUPT);
+	}
+	status &= mask;
+	if (status & IM_TX_EMPTY_INT) {
+	    outw(IM_TX_EMPTY_INT, ioaddr + INTERRUPT);
+	    mask &= ~IM_TX_EMPTY_INT;
+	    smc->stats.tx_packets += smc->packets_waiting;
+	    smc->packets_waiting = 0;
+	}
+	if (status & IM_ALLOC_INT) {
+	    /* Clear this interrupt so it doesn't happen again */
+	    mask &= ~IM_ALLOC_INT;
+	
+	    smc_hardware_send_packet(dev);
+	
+	    /* enable xmit interrupts based on this */
+	    mask |= (IM_TX_EMPTY_INT | IM_TX_INT);
+	
+	    /* and let the card send more packets to me */
+	    netif_wake_queue(dev);
+	}
+	if (status & IM_RX_OVRN_INT) {
+	    smc->stats.rx_errors++;
+	    smc->stats.rx_fifo_errors++;
+	    if (smc->duplex)
+		smc->rx_ovrn = 1; /* need MC_RESET outside smc_interrupt */
+	    outw(IM_RX_OVRN_INT, ioaddr + INTERRUPT);
+	}
+	if (status & IM_EPH_INT)
+	    smc_eph_irq(dev);
+    } while (--bogus_cnt);
+
+    DEBUG(3, "  Restoring saved registers mask %2.2x bank %4.4x"
+	  " pointer %4.4x.\n", mask, saved_bank, saved_pointer);
+
+    /* restore state register */
+    outw((mask<<8), ioaddr + INTERRUPT);
+    outw(saved_pointer, ioaddr + POINTER);
+    SMC_SELECT_BANK(saved_bank);
+
+    DEBUG(3, "%s: Exiting interrupt IRQ%d.\n", dev->name, irq);
+
+irq_done:
+
+    if ((smc->manfid == MANFID_OSITECH) &&
+	(smc->cardid != PRODID_OSITECH_SEVEN)) {
+	/* Retrigger interrupt if needed */
+	mask_bits(0x00ff, ioaddr-0x10+OSITECH_RESET_ISR);
+	set_bits(0x0300, ioaddr-0x10+OSITECH_RESET_ISR);
+    }
+    if (smc->manfid == MANFID_MOTOROLA) {
+	u_char cor;
+	cor = readb(smc->base + MOT_UART + CISREG_COR);
+	writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_UART + CISREG_COR);
+	writeb(cor, smc->base + MOT_UART + CISREG_COR);
+	cor = readb(smc->base + MOT_LAN + CISREG_COR);
+	writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_LAN + CISREG_COR);
+	writeb(cor, smc->base + MOT_LAN + CISREG_COR);
+    }
+#ifdef DOES_NOT_WORK
+    if (smc->base != NULL) { /* Megahertz MFC's */
+	readb(smc->base+MEGAHERTZ_ISR);
+	readb(smc->base+MEGAHERTZ_ISR);
+    }
+#endif
+    return IRQ_RETVAL(handled);
+}
+
+/*====================================================================*/
+
+static void smc_rx(struct net_device *dev)
+{
+    struct smc_private *smc = netdev_priv(dev);
+    kio_addr_t ioaddr = dev->base_addr;
+    int rx_status;
+    int packet_length;	/* Caution: not frame length, rather words
+			   to transfer from the chip. */
+
+    /* Assertion: we are in Window 2. */
+
+    if (inw(ioaddr + FIFO_PORTS) & FP_RXEMPTY) {
+	printk(KERN_ERR "%s: smc_rx() with nothing on Rx FIFO.\n",
+	       dev->name);
+	return;
+    }
+
+    /*  Reset the read pointer, and read the status and packet length. */
+    outw(PTR_READ | PTR_RCV | PTR_AUTOINC, ioaddr + POINTER);
+    rx_status = inw(ioaddr + DATA_1);
+    packet_length = inw(ioaddr + DATA_1) & 0x07ff;
+
+    DEBUG(2, "%s: Receive status %4.4x length %d.\n",
+	  dev->name, rx_status, packet_length);
+
+    if (!(rx_status & RS_ERRORS)) {		
+	/* do stuff to make a new packet */
+	struct sk_buff *skb;
+	
+	/* Note: packet_length adds 5 or 6 extra bytes here! */
+	skb = dev_alloc_skb(packet_length+2);
+	
+	if (skb == NULL) {
+	    DEBUG(1, "%s: Low memory, packet dropped.\n", dev->name);
+	    smc->stats.rx_dropped++;
+	    outw(MC_RELEASE, ioaddr + MMU_CMD);
+	    return;
+	}
+	
+	packet_length -= (rx_status & RS_ODDFRAME ? 5 : 6);
+	skb_reserve(skb, 2);
+	insw(ioaddr+DATA_1, skb_put(skb, packet_length),
+	     (packet_length+1)>>1);
+	skb->protocol = eth_type_trans(skb, dev);
+	
+	skb->dev = dev;
+	netif_rx(skb);
+	dev->last_rx = jiffies;
+	smc->stats.rx_packets++;
+	smc->stats.rx_bytes += packet_length;
+	if (rx_status & RS_MULTICAST)
+	    smc->stats.multicast++;
+    } else {
+	/* error ... */
+	smc->stats.rx_errors++;
+	
+	if (rx_status & RS_ALGNERR)  smc->stats.rx_frame_errors++;
+	if (rx_status & (RS_TOOSHORT | RS_TOOLONG))
+	    smc->stats.rx_length_errors++;
+	if (rx_status & RS_BADCRC)	smc->stats.rx_crc_errors++;
+    }
+    /* Let the MMU free the memory of this packet. */
+    outw(MC_RELEASE, ioaddr + MMU_CMD);
+
+    return;
+}
+
+/*====================================================================*/
+
+static struct net_device_stats *smc_get_stats(struct net_device *dev)
+{
+    struct smc_private *smc = netdev_priv(dev);
+    /* Nothing to update - the 91c92 is a pretty primative chip. */
+    return &smc->stats;
+}
+
+/*======================================================================
+
+    Calculate values for the hardware multicast filter hash table.
+
+======================================================================*/
+
+static void fill_multicast_tbl(int count, struct dev_mc_list *addrs,
+			       u_char *multicast_table)
+{
+    struct dev_mc_list	*mc_addr;
+
+    for (mc_addr = addrs;  mc_addr && --count > 0;  mc_addr = mc_addr->next) {
+	u_int position = ether_crc(6, mc_addr->dmi_addr);
+#ifndef final_version		/* Verify multicast address. */
+	if ((mc_addr->dmi_addr[0] & 1) == 0)
+	    continue;
+#endif
+	multicast_table[position >> 29] |= 1 << ((position >> 26) & 7);
+    }
+}
+
+/*======================================================================
+
+    Set the receive mode.
+
+    This routine is used by both the protocol level to notify us of
+    promiscuous/multicast mode changes, and by the open/reset code to
+    initialize the Rx registers.  We always set the multicast list and
+    leave the receiver running.
+
+======================================================================*/
+
+static void set_rx_mode(struct net_device *dev)
+{
+    kio_addr_t ioaddr = dev->base_addr;
+    struct smc_private *smc = netdev_priv(dev);
+    u_int multicast_table[ 2 ] = { 0, };
+    unsigned long flags;
+    u_short rx_cfg_setting;
+
+    if (dev->flags & IFF_PROMISC) {
+	printk(KERN_NOTICE "%s: setting Rx mode to promiscuous.\n", dev->name);
+	rx_cfg_setting = RxStripCRC | RxEnable | RxPromisc | RxAllMulti;
+    } else if (dev->flags & IFF_ALLMULTI)
+	rx_cfg_setting = RxStripCRC | RxEnable | RxAllMulti;
+    else {
+	if (dev->mc_count)  {
+	    fill_multicast_tbl(dev->mc_count, dev->mc_list,
+			       (u_char *)multicast_table);
+	}
+	rx_cfg_setting = RxStripCRC | RxEnable;
+    }
+
+    /* Load MC table and Rx setting into the chip without interrupts. */
+    spin_lock_irqsave(&smc->lock, flags);
+    SMC_SELECT_BANK(3);
+    outl(multicast_table[0], ioaddr + MULTICAST0);
+    outl(multicast_table[1], ioaddr + MULTICAST4);
+    SMC_SELECT_BANK(0);
+    outw(rx_cfg_setting, ioaddr + RCR);
+    SMC_SELECT_BANK(2);
+    spin_unlock_irqrestore(&smc->lock, flags);
+
+    return;
+}
+
+/*======================================================================
+
+    Senses when a card's config changes. Here, it's coax or TP.
+
+======================================================================*/
+
+static int s9k_config(struct net_device *dev, struct ifmap *map)
+{
+    struct smc_private *smc = netdev_priv(dev);
+    if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
+	if (smc->cfg & CFG_MII_SELECT)
+	    return -EOPNOTSUPP;
+	else if (map->port > 2)
+	    return -EINVAL;
+	dev->if_port = map->port;
+	printk(KERN_INFO "%s: switched to %s port\n",
+	       dev->name, if_names[dev->if_port]);
+	smc_reset(dev);
+    }
+    return 0;
+}
+
+/*======================================================================
+
+    Reset the chip, reloading every register that might be corrupted.
+
+======================================================================*/
+
+/*
+  Set transceiver type, perhaps to something other than what the user
+  specified in dev->if_port.
+*/
+static void smc_set_xcvr(struct net_device *dev, int if_port)
+{
+    struct smc_private *smc = netdev_priv(dev);
+    kio_addr_t ioaddr = dev->base_addr;
+    u_short saved_bank;
+
+    saved_bank = inw(ioaddr + BANK_SELECT);
+    SMC_SELECT_BANK(1);
+    if (if_port == 2) {
+	outw(smc->cfg | CFG_AUI_SELECT, ioaddr + CONFIG);
+	if ((smc->manfid == MANFID_OSITECH) &&
+	    (smc->cardid != PRODID_OSITECH_SEVEN))
+	    set_bits(OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR);
+	smc->media_status = ((dev->if_port == 0) ? 0x0001 : 0x0002);
+    } else {
+	outw(smc->cfg, ioaddr + CONFIG);
+	if ((smc->manfid == MANFID_OSITECH) &&
+	    (smc->cardid != PRODID_OSITECH_SEVEN))
+	    mask_bits(~OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR);
+	smc->media_status = ((dev->if_port == 0) ? 0x0012 : 0x4001);
+    }
+    SMC_SELECT_BANK(saved_bank);
+}
+
+static void smc_reset(struct net_device *dev)
+{
+    kio_addr_t ioaddr = dev->base_addr;
+    struct smc_private *smc = netdev_priv(dev);
+    int i;
+
+    DEBUG(0, "%s: smc91c92 reset called.\n", dev->name);
+
+    /* The first interaction must be a write to bring the chip out
+       of sleep mode. */
+    SMC_SELECT_BANK(0);
+    /* Reset the chip. */
+    outw(RCR_SOFTRESET, ioaddr + RCR);
+    udelay(10);
+
+    /* Clear the transmit and receive configuration registers. */
+    outw(RCR_CLEAR, ioaddr + RCR);
+    outw(TCR_CLEAR, ioaddr + TCR);
+
+    /* Set the Window 1 control, configuration and station addr registers.
+       No point in writing the I/O base register ;-> */
+    SMC_SELECT_BANK(1);
+    /* Automatically release succesfully transmitted packets,
+       Accept link errors, counter and Tx error interrupts. */
+    outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE,
+	 ioaddr + CONTROL);
+    smc_set_xcvr(dev, dev->if_port);
+    if ((smc->manfid == MANFID_OSITECH) &&
+	(smc->cardid != PRODID_OSITECH_SEVEN))
+	outw((dev->if_port == 2 ? OSI_AUI_PWR : 0) |
+	     (inw(ioaddr-0x10+OSITECH_AUI_PWR) & 0xff00),
+	     ioaddr - 0x10 + OSITECH_AUI_PWR);
+
+    /* Fill in the physical address.  The databook is wrong about the order! */
+    for (i = 0; i < 6; i += 2)
+	outw((dev->dev_addr[i+1]<<8)+dev->dev_addr[i],
+	     ioaddr + ADDR0 + i);
+
+    /* Reset the MMU */
+    SMC_SELECT_BANK(2);
+    outw(MC_RESET, ioaddr + MMU_CMD);
+    outw(0, ioaddr + INTERRUPT);
+
+    /* Re-enable the chip. */
+    SMC_SELECT_BANK(0);
+    outw(((smc->cfg & CFG_MII_SELECT) ? 0 : TCR_MONCSN) |
+	 TCR_ENABLE | TCR_PAD_EN | smc->duplex, ioaddr + TCR);
+    set_rx_mode(dev);
+
+    if (smc->cfg & CFG_MII_SELECT) {
+	SMC_SELECT_BANK(3);
+
+	/* Reset MII */
+	mdio_write(dev, smc->mii_if.phy_id, 0, 0x8000);
+
+	/* Advertise 100F, 100H, 10F, 10H */
+	mdio_write(dev, smc->mii_if.phy_id, 4, 0x01e1);
+
+	/* Restart MII autonegotiation */
+	mdio_write(dev, smc->mii_if.phy_id, 0, 0x0000);
+	mdio_write(dev, smc->mii_if.phy_id, 0, 0x1200);
+    }
+
+    /* Enable interrupts. */
+    SMC_SELECT_BANK(2);
+    outw((IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT) << 8,
+	 ioaddr + INTERRUPT);
+}
+
+/*======================================================================
+
+    Media selection timer routine
+
+======================================================================*/
+
+static void media_check(u_long arg)
+{
+    struct net_device *dev = (struct net_device *) arg;
+    struct smc_private *smc = netdev_priv(dev);
+    kio_addr_t ioaddr = dev->base_addr;
+    u_short i, media, saved_bank;
+    u_short link;
+
+    saved_bank = inw(ioaddr + BANK_SELECT);
+
+    if (!netif_device_present(dev))
+	goto reschedule;
+
+    SMC_SELECT_BANK(2);
+
+    /* need MC_RESET to keep the memory consistent. errata? */
+    if (smc->rx_ovrn) {
+	outw(MC_RESET, ioaddr + MMU_CMD);
+	smc->rx_ovrn = 0;
+    }
+    i = inw(ioaddr + INTERRUPT);
+    SMC_SELECT_BANK(0);
+    media = inw(ioaddr + EPH) & EPH_LINK_OK;
+    SMC_SELECT_BANK(1);
+    media |= (inw(ioaddr + CONFIG) & CFG_AUI_SELECT) ? 2 : 1;
+
+    /* Check for pending interrupt with watchdog flag set: with
+       this, we can limp along even if the interrupt is blocked */
+    if (smc->watchdog++ && ((i>>8) & i)) {
+	if (!smc->fast_poll)
+	    printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
+	smc_interrupt(dev->irq, smc, NULL);
+	smc->fast_poll = HZ;
+    }
+    if (smc->fast_poll) {
+	smc->fast_poll--;
+	smc->media.expires = jiffies + HZ/100;
+	add_timer(&smc->media);
+	SMC_SELECT_BANK(saved_bank);
+	return;
+    }
+
+    if (smc->cfg & CFG_MII_SELECT) {
+	if (smc->mii_if.phy_id < 0)
+	    goto reschedule;
+
+	SMC_SELECT_BANK(3);
+	link = mdio_read(dev, smc->mii_if.phy_id, 1);
+	if (!link || (link == 0xffff)) {
+  	    printk(KERN_INFO "%s: MII is missing!\n", dev->name);
+	    smc->mii_if.phy_id = -1;
+	    goto reschedule;
+	}
+
+	link &= 0x0004;
+	if (link != smc->link_status) {
+	    u_short p = mdio_read(dev, smc->mii_if.phy_id, 5);
+	    printk(KERN_INFO "%s: %s link beat\n", dev->name,
+		(link) ? "found" : "lost");
+	    smc->duplex = (((p & 0x0100) || ((p & 0x1c0) == 0x40))
+			   ? TCR_FDUPLX : 0);
+	    if (link) {
+	        printk(KERN_INFO "%s: autonegotiation complete: "
+		       "%sbaseT-%cD selected\n", dev->name,
+		       ((p & 0x0180) ? "100" : "10"),
+		       (smc->duplex ? 'F' : 'H'));
+	    }
+	    SMC_SELECT_BANK(0);
+	    outw(inw(ioaddr + TCR) | smc->duplex, ioaddr + TCR);
+	    smc->link_status = link;
+	}
+	goto reschedule;
+    }
+
+    /* Ignore collisions unless we've had no rx's recently */
+    if (jiffies - dev->last_rx > HZ) {
+	if (smc->tx_err || (smc->media_status & EPH_16COL))
+	    media |= EPH_16COL;
+    }
+    smc->tx_err = 0;
+
+    if (media != smc->media_status) {
+	if ((media & smc->media_status & 1) &&
+	    ((smc->media_status ^ media) & EPH_LINK_OK))
+	    printk(KERN_INFO "%s: %s link beat\n", dev->name,
+		   (smc->media_status & EPH_LINK_OK ? "lost" : "found"));
+	else if ((media & smc->media_status & 2) &&
+		 ((smc->media_status ^ media) & EPH_16COL))
+	    printk(KERN_INFO "%s: coax cable %s\n", dev->name,
+		   (media & EPH_16COL ? "problem" : "ok"));
+	if (dev->if_port == 0) {
+	    if (media & 1) {
+		if (media & EPH_LINK_OK)
+		    printk(KERN_INFO "%s: flipped to 10baseT\n",
+			   dev->name);
+		else
+		    smc_set_xcvr(dev, 2);
+	    } else {
+		if (media & EPH_16COL)
+		    smc_set_xcvr(dev, 1);
+		else
+		    printk(KERN_INFO "%s: flipped to 10base2\n",
+			   dev->name);
+	    }
+	}
+	smc->media_status = media;
+    }
+
+reschedule:
+    smc->media.expires = jiffies + HZ;
+    add_timer(&smc->media);
+    SMC_SELECT_BANK(saved_bank);
+}
+
+static int smc_link_ok(struct net_device *dev)
+{
+    kio_addr_t ioaddr = dev->base_addr;
+    struct smc_private *smc = netdev_priv(dev);
+
+    if (smc->cfg & CFG_MII_SELECT) {
+	return mii_link_ok(&smc->mii_if);
+    } else {
+        SMC_SELECT_BANK(0);
+	return inw(ioaddr + EPH) & EPH_LINK_OK;
+    }
+}
+
+static int smc_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+    u16 tmp;
+    kio_addr_t ioaddr = dev->base_addr;
+
+    ecmd->supported = (SUPPORTED_TP | SUPPORTED_AUI |
+	SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full);
+		
+    SMC_SELECT_BANK(1);
+    tmp = inw(ioaddr + CONFIG);
+    ecmd->port = (tmp & CFG_AUI_SELECT) ? PORT_AUI : PORT_TP;
+    ecmd->transceiver = XCVR_INTERNAL;
+    ecmd->speed = SPEED_10;
+    ecmd->phy_address = ioaddr + MGMT;
+
+    SMC_SELECT_BANK(0);
+    tmp = inw(ioaddr + TCR);
+    ecmd->duplex = (tmp & TCR_FDUPLX) ? DUPLEX_FULL : DUPLEX_HALF;
+
+    return 0;
+}
+
+static int smc_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+    u16 tmp;
+    kio_addr_t ioaddr = dev->base_addr;
+
+    if (ecmd->speed != SPEED_10)
+    	return -EINVAL;
+    if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
+    	return -EINVAL;
+    if (ecmd->port != PORT_TP && ecmd->port != PORT_AUI)
+	return -EINVAL;
+    if (ecmd->transceiver != XCVR_INTERNAL)
+    	return -EINVAL;
+
+    if (ecmd->port == PORT_AUI)
+	smc_set_xcvr(dev, 1);
+    else
+	smc_set_xcvr(dev, 0);
+
+    SMC_SELECT_BANK(0);
+    tmp = inw(ioaddr + TCR);
+    if (ecmd->duplex == DUPLEX_FULL)
+	tmp |= TCR_FDUPLX;
+    else
+	tmp &= ~TCR_FDUPLX;
+    outw(tmp, ioaddr + TCR);
+	
+    return 0;
+}
+
+static int check_if_running(struct net_device *dev)
+{
+	if (!netif_running(dev))
+		return -EINVAL;
+	return 0;
+}
+
+static void smc_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	strcpy(info->driver, DRV_NAME);
+	strcpy(info->version, DRV_VERSION);
+}
+
+static int smc_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	struct smc_private *smc = netdev_priv(dev);
+	kio_addr_t ioaddr = dev->base_addr;
+	u16 saved_bank = inw(ioaddr + BANK_SELECT);
+	int ret;
+
+	SMC_SELECT_BANK(3);
+	spin_lock_irq(&smc->lock);
+	if (smc->cfg & CFG_MII_SELECT)
+		ret = mii_ethtool_gset(&smc->mii_if, ecmd);
+	else
+		ret = smc_netdev_get_ecmd(dev, ecmd);
+	spin_unlock_irq(&smc->lock);
+	SMC_SELECT_BANK(saved_bank);
+	return ret;
+}
+
+static int smc_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	struct smc_private *smc = netdev_priv(dev);
+	kio_addr_t ioaddr = dev->base_addr;
+	u16 saved_bank = inw(ioaddr + BANK_SELECT);
+	int ret;
+
+	SMC_SELECT_BANK(3);
+	spin_lock_irq(&smc->lock);
+	if (smc->cfg & CFG_MII_SELECT)
+		ret = mii_ethtool_sset(&smc->mii_if, ecmd);
+	else
+		ret = smc_netdev_set_ecmd(dev, ecmd);
+	spin_unlock_irq(&smc->lock);
+	SMC_SELECT_BANK(saved_bank);
+	return ret;
+}
+
+static u32 smc_get_link(struct net_device *dev)
+{
+	struct smc_private *smc = netdev_priv(dev);
+	kio_addr_t ioaddr = dev->base_addr;
+	u16 saved_bank = inw(ioaddr + BANK_SELECT);
+	u32 ret;
+
+	SMC_SELECT_BANK(3);
+	spin_lock_irq(&smc->lock);
+	ret = smc_link_ok(dev);
+	spin_unlock_irq(&smc->lock);
+	SMC_SELECT_BANK(saved_bank);
+	return ret;
+}
+
+#ifdef PCMCIA_DEBUG
+static u32 smc_get_msglevel(struct net_device *dev)
+{
+	return pc_debug;
+}
+
+static void smc_set_msglevel(struct net_device *dev, u32 val)
+{
+	pc_debug = val;
+}
+#endif
+
+static int smc_nway_reset(struct net_device *dev)
+{
+	struct smc_private *smc = netdev_priv(dev);
+	if (smc->cfg & CFG_MII_SELECT) {
+		kio_addr_t ioaddr = dev->base_addr;
+		u16 saved_bank = inw(ioaddr + BANK_SELECT);
+		int res;
+
+		SMC_SELECT_BANK(3);
+		res = mii_nway_restart(&smc->mii_if);
+		SMC_SELECT_BANK(saved_bank);
+
+		return res;
+	} else
+		return -EOPNOTSUPP;
+}
+
+static struct ethtool_ops ethtool_ops = {
+	.begin = check_if_running,
+	.get_drvinfo = smc_get_drvinfo,
+	.get_settings = smc_get_settings,
+	.set_settings = smc_set_settings,
+	.get_link = smc_get_link,
+#ifdef PCMCIA_DEBUG
+	.get_msglevel = smc_get_msglevel,
+	.set_msglevel = smc_set_msglevel,
+#endif
+	.nway_reset = smc_nway_reset,
+};
+
+static int smc_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct smc_private *smc = netdev_priv(dev);
+	struct mii_ioctl_data *mii = if_mii(rq);
+	int rc = 0;
+	u16 saved_bank;
+	kio_addr_t ioaddr = dev->base_addr;
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	spin_lock_irq(&smc->lock);
+	saved_bank = inw(ioaddr + BANK_SELECT);
+	SMC_SELECT_BANK(3);
+	rc = generic_mii_ioctl(&smc->mii_if, mii, cmd, NULL);
+	SMC_SELECT_BANK(saved_bank);
+	spin_unlock_irq(&smc->lock);
+	return rc;
+}
+
+static struct pcmcia_driver smc91c92_cs_driver = {
+	.owner		= THIS_MODULE,
+	.drv		= {
+		.name	= "smc91c92_cs",
+	},
+	.attach		= smc91c92_attach,
+	.detach		= smc91c92_detach,
+};
+
+static int __init init_smc91c92_cs(void)
+{
+	return pcmcia_register_driver(&smc91c92_cs_driver);
+}
+
+static void __exit exit_smc91c92_cs(void)
+{
+	pcmcia_unregister_driver(&smc91c92_cs_driver);
+	BUG_ON(dev_list != NULL);
+}
+
+module_init(init_smc91c92_cs);
+module_exit(exit_smc91c92_cs);