Remove sk98lin ethernet driver.

Unmaintained, superceded by skge.

Prodded to deletion by Adrian Bunk.  Acked by Stephen Hemminger.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 0 insertions, 797 deletions

diff --git a/drivers/net/sk98lin/h/skgeinit.h b/drivers/net/sk98lin/h/skgeinit.h
deleted file mode 100644
index 143e635ec24..00000000000
--- a/drivers/net/sk98lin/h/skgeinit.h
+++ /dev/null
@@ -1,797 +0,0 @@
-/******************************************************************************
- *
- * Name:	skgeinit.h
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.83 $
- * Date:	$Date: 2003/09/16 14:07:37 $
- * Purpose:	Structures and prototypes for the GE Init Module
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_SKGEINIT_H_
-#define __INC_SKGEINIT_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif	/* __cplusplus */
-
-/* defines ********************************************************************/
-
-#define SK_TEST_VAL		0x11335577UL
-
-/* modifying Link LED behaviour (used with SkGeLinkLED()) */
-#define SK_LNK_OFF		LED_OFF
-#define SK_LNK_ON		(LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
-#define SK_LNK_BLINK	(LED_ON | LED_BLK_ON  | LED_SYNC_ON)
-#define SK_LNK_PERM		(LED_ON | LED_BLK_OFF | LED_SYNC_ON)
-#define SK_LNK_TST		(LED_ON | LED_BLK_ON  | LED_SYNC_OFF)
-
-/* parameter 'Mode' when calling SK_HWAC_LINK_LED() */
-#define SK_LED_OFF		LED_OFF
-#define SK_LED_ACTIVE	(LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
-#define SK_LED_STANDBY	(LED_ON | LED_BLK_ON  | LED_SYNC_OFF)
-
-/* addressing LED Registers in SkGeXmitLED() */
-#define XMIT_LED_INI	0
-#define XMIT_LED_CNT	(RX_LED_VAL - RX_LED_INI)
-#define XMIT_LED_CTRL	(RX_LED_CTRL- RX_LED_INI)
-#define XMIT_LED_TST	(RX_LED_TST - RX_LED_INI)
-
-/* parameter 'Mode' when calling SkGeXmitLED() */
-#define SK_LED_DIS	0
-#define SK_LED_ENA	1
-#define SK_LED_TST	2
-
-/* Counter and Timer constants, for a host clock of 62.5 MHz */
-#define SK_XMIT_DUR		0x002faf08UL	/*  50 ms */
-#define SK_BLK_DUR		0x01dcd650UL	/* 500 ms */
-
-#define SK_DPOLL_DEF	0x00ee6b28UL	/* 250 ms at 62.5 MHz */
-
-#define SK_DPOLL_MAX	0x00ffffffUL	/* 268 ms at 62.5 MHz */
-										/* 215 ms at 78.12 MHz */
-
-#define SK_FACT_62		100			/* is given in percent */
-#define SK_FACT_53		 85         /* on GENESIS:	53.12 MHz */
-#define SK_FACT_78		125			/* on YUKON:	78.12 MHz */
-
-/* Timeout values */
-#define SK_MAC_TO_53	72			/* MAC arbiter timeout */
-#define SK_PKT_TO_53	0x2000		/* Packet arbiter timeout */
-#define SK_PKT_TO_MAX	0xffff		/* Maximum value */
-#define SK_RI_TO_53		36			/* RAM interface timeout */
-
-#define SK_PHY_ACC_TO	600000		/* PHY access timeout */
-
-/* RAM Buffer High Pause Threshold values */
-#define SK_RB_ULPP		( 8 * 1024)	/* Upper Level in kB/8 */
-#define SK_RB_LLPP_S	(10 * 1024)	/* Lower Level for small Queues */
-#define SK_RB_LLPP_B	(16 * 1024)	/* Lower Level for big Queues */
-
-#ifndef SK_BMU_RX_WM
-#define SK_BMU_RX_WM	0x600		/* BMU Rx Watermark */
-#endif
-#ifndef SK_BMU_TX_WM
-#define SK_BMU_TX_WM	0x600		/* BMU Tx Watermark */
-#endif
-
-/* XMAC II Rx High Watermark */
-#define SK_XM_RX_HI_WM	0x05aa		/* 1450 */
-
-/* XMAC II Tx Threshold */
-#define SK_XM_THR_REDL	0x01fb		/* .. for redundant link usage */
-#define SK_XM_THR_SL	0x01fb		/* .. for single link adapters */
-#define SK_XM_THR_MULL	0x01fb		/* .. for multiple link usage */
-#define SK_XM_THR_JUMBO	0x03fc		/* .. for jumbo frame usage */
-
-/* values for GIPortUsage */
-#define SK_RED_LINK		1		/* redundant link usage */
-#define SK_MUL_LINK		2		/* multiple link usage */
-#define SK_JUMBO_LINK	3		/* driver uses jumbo frames */
-
-/* Minimum RAM Buffer Rx Queue Size */
-#define SK_MIN_RXQ_SIZE	16		/* 16 kB */
-
-/* Minimum RAM Buffer Tx Queue Size */
-#define SK_MIN_TXQ_SIZE	16		/* 16 kB */
-
-/* Queue Size units */
-#define QZ_UNITS		0x7
-#define QZ_STEP			8
-
-/* Percentage of queue size from whole memory */
-/* 80 % for receive */
-#define RAM_QUOTA_RX	80L
-/* 0% for sync transfer */
-#define	RAM_QUOTA_SYNC	0L
-/* the rest (20%) is taken for async transfer */
-
-/* Get the rounded queue size in Bytes in 8k steps */
-#define ROUND_QUEUE_SIZE(SizeInBytes)					\
-	((((unsigned long) (SizeInBytes) + (QZ_STEP*1024L)-1) / 1024) &	\
-	~(QZ_STEP-1))
-
-/* Get the rounded queue size in KBytes in 8k steps */
-#define ROUND_QUEUE_SIZE_KB(Kilobytes) \
-	ROUND_QUEUE_SIZE((Kilobytes) * 1024L)
-
-/* Types of RAM Buffer Queues */
-#define SK_RX_SRAM_Q	1	/* small receive queue */
-#define SK_RX_BRAM_Q	2	/* big receive queue */
-#define SK_TX_RAM_Q		3	/* small or big transmit queue */
-
-/* parameter 'Dir' when calling SkGeStopPort() */
-#define SK_STOP_TX	1	/* Stops the transmit path, resets the XMAC */
-#define SK_STOP_RX	2	/* Stops the receive path */
-#define SK_STOP_ALL	3	/* Stops Rx and Tx path, resets the XMAC */
-
-/* parameter 'RstMode' when calling SkGeStopPort() */
-#define SK_SOFT_RST	1	/* perform a software reset */
-#define SK_HARD_RST	2	/* perform a hardware reset */
-
-/* Init Levels */
-#define SK_INIT_DATA	0	/* Init level 0: init data structures */
-#define SK_INIT_IO		1	/* Init level 1: init with IOs */
-#define SK_INIT_RUN		2	/* Init level 2: init for run time */
-
-/* Link Mode Parameter */
-#define SK_LMODE_HALF		1	/* Half Duplex Mode */
-#define SK_LMODE_FULL		2	/* Full Duplex Mode */
-#define SK_LMODE_AUTOHALF	3	/* AutoHalf Duplex Mode */
-#define SK_LMODE_AUTOFULL	4	/* AutoFull Duplex Mode */
-#define SK_LMODE_AUTOBOTH	5	/* AutoBoth Duplex Mode */
-#define SK_LMODE_AUTOSENSE	6	/* configured mode auto sensing */
-#define SK_LMODE_INDETERMINATED	7	/* indeterminated */
-
-/* Auto-negotiation timeout in 100ms granularity */
-#define SK_AND_MAX_TO		6	/* Wait 600 msec before link comes up */
-
-/* Auto-negotiation error codes */
-#define SK_AND_OK			0	/* no error */
-#define SK_AND_OTHER		1	/* other error than below */
-#define SK_AND_DUP_CAP		2	/* Duplex capabilities error */
-
-
-/* Link Speed Capabilities */
-#define SK_LSPEED_CAP_AUTO			(1<<0)	/* Automatic resolution */
-#define SK_LSPEED_CAP_10MBPS		(1<<1)	/* 10 Mbps */
-#define SK_LSPEED_CAP_100MBPS		(1<<2)	/* 100 Mbps */
-#define SK_LSPEED_CAP_1000MBPS		(1<<3)	/* 1000 Mbps */
-#define SK_LSPEED_CAP_INDETERMINATED (1<<4) /* indeterminated */
-
-/* Link Speed Parameter */
-#define SK_LSPEED_AUTO				1	/* Automatic resolution */
-#define SK_LSPEED_10MBPS			2	/* 10 Mbps */
-#define SK_LSPEED_100MBPS			3	/* 100 Mbps */
-#define SK_LSPEED_1000MBPS			4	/* 1000 Mbps */
-#define SK_LSPEED_INDETERMINATED	5	/* indeterminated */
-
-/* Link Speed Current State */
-#define SK_LSPEED_STAT_UNKNOWN		1
-#define SK_LSPEED_STAT_10MBPS		2
-#define SK_LSPEED_STAT_100MBPS 		3
-#define SK_LSPEED_STAT_1000MBPS		4
-#define SK_LSPEED_STAT_INDETERMINATED 5
-
-
-/* Link Capability Parameter */
-#define SK_LMODE_CAP_HALF		(1<<0)	/* Half Duplex Mode */
-#define SK_LMODE_CAP_FULL		(1<<1)	/* Full Duplex Mode */
-#define SK_LMODE_CAP_AUTOHALF	(1<<2)	/* AutoHalf Duplex Mode */
-#define SK_LMODE_CAP_AUTOFULL	(1<<3)	/* AutoFull Duplex Mode */
-#define SK_LMODE_CAP_INDETERMINATED (1<<4) /* indeterminated */
-
-/* Link Mode Current State */
-#define SK_LMODE_STAT_UNKNOWN	1	/* Unknown Duplex Mode */
-#define SK_LMODE_STAT_HALF		2	/* Half Duplex Mode */
-#define SK_LMODE_STAT_FULL		3	/* Full Duplex Mode */
-#define SK_LMODE_STAT_AUTOHALF	4	/* Half Duplex Mode obtained by Auto-Neg */
-#define SK_LMODE_STAT_AUTOFULL	5	/* Full Duplex Mode obtained by Auto-Neg */
-#define SK_LMODE_STAT_INDETERMINATED 6	/* indeterminated */
-
-/* Flow Control Mode Parameter (and capabilities) */
-#define SK_FLOW_MODE_NONE		1	/* No Flow-Control */
-#define SK_FLOW_MODE_LOC_SEND	2	/* Local station sends PAUSE */
-#define SK_FLOW_MODE_SYMMETRIC	3	/* Both stations may send PAUSE */
-#define SK_FLOW_MODE_SYM_OR_REM	4	/* Both stations may send PAUSE or
-					 * just the remote station may send PAUSE
-					 */
-#define SK_FLOW_MODE_INDETERMINATED 5	/* indeterminated */
-
-/* Flow Control Status Parameter */
-#define SK_FLOW_STAT_NONE		1	/* No Flow Control */
-#define SK_FLOW_STAT_REM_SEND	2	/* Remote Station sends PAUSE */
-#define SK_FLOW_STAT_LOC_SEND	3	/* Local station sends PAUSE */
-#define SK_FLOW_STAT_SYMMETRIC	4	/* Both station may send PAUSE */
-#define SK_FLOW_STAT_INDETERMINATED 5	/* indeterminated */
-
-/* Master/Slave Mode Capabilities */
-#define SK_MS_CAP_AUTO		(1<<0)	/* Automatic resolution */
-#define SK_MS_CAP_MASTER	(1<<1)	/* This station is master */
-#define SK_MS_CAP_SLAVE		(1<<2)	/* This station is slave */
-#define SK_MS_CAP_INDETERMINATED (1<<3)	/* indeterminated */
-
-/* Set Master/Slave Mode Parameter (and capabilities) */
-#define SK_MS_MODE_AUTO		1	/* Automatic resolution */
-#define SK_MS_MODE_MASTER	2	/* This station is master */
-#define SK_MS_MODE_SLAVE	3	/* This station is slave */
-#define SK_MS_MODE_INDETERMINATED 4	/* indeterminated */
-
-/* Master/Slave Status Parameter */
-#define SK_MS_STAT_UNSET	1	/* The M/S status is not set */
-#define SK_MS_STAT_MASTER	2	/* This station is master */
-#define SK_MS_STAT_SLAVE	3	/* This station is slave */
-#define SK_MS_STAT_FAULT	4	/* M/S resolution failed */
-#define SK_MS_STAT_INDETERMINATED 5	/* indeterminated */
-
-/* parameter 'Mode' when calling SkXmSetRxCmd() */
-#define SK_STRIP_FCS_ON		(1<<0)	/* Enable  FCS stripping of Rx frames */
-#define SK_STRIP_FCS_OFF	(1<<1)	/* Disable FCS stripping of Rx frames */
-#define SK_STRIP_PAD_ON		(1<<2)	/* Enable  pad byte stripping of Rx fr */
-#define SK_STRIP_PAD_OFF	(1<<3)	/* Disable pad byte stripping of Rx fr */
-#define SK_LENERR_OK_ON		(1<<4)	/* Don't chk fr for in range len error */
-#define SK_LENERR_OK_OFF	(1<<5)	/* Check frames for in range len error */
-#define SK_BIG_PK_OK_ON		(1<<6)	/* Don't set Rx Error bit for big frames */
-#define SK_BIG_PK_OK_OFF	(1<<7)	/* Set Rx Error bit for big frames */
-#define SK_SELF_RX_ON		(1<<8)	/* Enable  Rx of own packets */
-#define SK_SELF_RX_OFF		(1<<9)	/* Disable Rx of own packets */
-
-/* parameter 'Para' when calling SkMacSetRxTxEn() */
-#define SK_MAC_LOOPB_ON		(1<<0)	/* Enable  MAC Loopback Mode */
-#define SK_MAC_LOOPB_OFF	(1<<1)	/* Disable MAC Loopback Mode */
-#define SK_PHY_LOOPB_ON		(1<<2)	/* Enable  PHY Loopback Mode */
-#define SK_PHY_LOOPB_OFF	(1<<3)	/* Disable PHY Loopback Mode */
-#define SK_PHY_FULLD_ON		(1<<4)	/* Enable  GMII Full Duplex */
-#define SK_PHY_FULLD_OFF	(1<<5)	/* Disable GMII Full Duplex */
-
-/* States of PState */
-#define SK_PRT_RESET	0	/* the port is reset */
-#define SK_PRT_STOP		1	/* the port is stopped (similar to SW reset) */
-#define SK_PRT_INIT		2	/* the port is initialized */
-#define SK_PRT_RUN		3	/* the port has an active link */
-
-/* PHY power down modes */
-#define PHY_PM_OPERATIONAL_MODE		0	/* PHY operational mode */
-#define PHY_PM_DEEP_SLEEP			1	/* coma mode --> minimal power */
-#define PHY_PM_IEEE_POWER_DOWN		2	/* IEEE 22.2.4.1.5 compl. power down */
-#define PHY_PM_ENERGY_DETECT		3	/* energy detect */
-#define PHY_PM_ENERGY_DETECT_PLUS	4	/* energy detect plus */
-
-/* Default receive frame limit for Workaround of XMAC Errata */
-#define SK_DEF_RX_WA_LIM	SK_CONSTU64(100)
-
-/* values for GILedBlinkCtrl (LED Blink Control) */
-#define SK_ACT_LED_BLINK	(1<<0)	/* Active LED blinking */
-#define SK_DUP_LED_NORMAL	(1<<1)	/* Duplex LED normal */
-#define SK_LED_LINK100_ON	(1<<2)	/* Link 100M LED on */
-
-/* Link Partner Status */
-#define SK_LIPA_UNKNOWN	0	/* Link partner is in unknown state */
-#define SK_LIPA_MANUAL	1	/* Link partner is in detected manual state */
-#define SK_LIPA_AUTO	2	/* Link partner is in auto-negotiation state */
-
-/* Maximum Restarts before restart is ignored (3Com WA) */
-#define SK_MAX_LRESTART	3	/* Max. 3 times the link is restarted */
-
-/* Max. Auto-neg. timeouts before link detection in sense mode is reset */
-#define SK_MAX_ANEG_TO	10	/* Max. 10 times the sense mode is reset */
-
-/* structures *****************************************************************/
-
-/*
- * MAC specific functions
- */
-typedef struct s_GeMacFunc {
-	int  (*pFnMacUpdateStats)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
-	int  (*pFnMacStatistic)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
-							SK_U16 StatAddr, SK_U32 SK_FAR *pVal);
-	int  (*pFnMacResetCounter)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
-	int  (*pFnMacOverflow)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
-						   SK_U16 IStatus, SK_U64 SK_FAR *pVal);
-} SK_GEMACFUNC;
-
-/*
- * Port Structure
- */
-typedef	struct s_GePort {
-#ifndef SK_DIAG
-	SK_TIMER	PWaTimer;	/* Workaround Timer */
-	SK_TIMER	HalfDupChkTimer;
-#endif /* SK_DIAG */
-	SK_U32	PPrevShorts;	/* Previous Short Counter checking */
-	SK_U32	PPrevFcs;		/* Previous FCS Error Counter checking */
-	SK_U64	PPrevRx;		/* Previous RxOk Counter checking */
-	SK_U64	PRxLim;			/* Previous RxOk Counter checking */
-	SK_U64	LastOctets;		/* For half duplex hang check */
-	int		PLinkResCt;		/* Link Restart Counter */
-	int		PAutoNegTimeOut;/* Auto-negotiation timeout current value */
-	int		PAutoNegTOCt;	/* Auto-negotiation Timeout Counter */
-	int		PRxQSize;		/* Port Rx Queue Size in kB */
-	int		PXSQSize;		/* Port Synchronous  Transmit Queue Size in kB */
-	int		PXAQSize;		/* Port Asynchronous Transmit Queue Size in kB */
-	SK_U32	PRxQRamStart;	/* Receive Queue RAM Buffer Start Address */
-	SK_U32	PRxQRamEnd;		/* Receive Queue RAM Buffer End Address */
-	SK_U32	PXsQRamStart;	/* Sync Tx Queue RAM Buffer Start Address */
-	SK_U32	PXsQRamEnd;		/* Sync Tx Queue RAM Buffer End Address */
-	SK_U32	PXaQRamStart;	/* Async Tx Queue RAM Buffer Start Address */
-	SK_U32	PXaQRamEnd;		/* Async Tx Queue RAM Buffer End Address */
-	SK_U32	PRxOverCnt;		/* Receive Overflow Counter */
-	int		PRxQOff;		/* Rx Queue Address Offset */
-	int		PXsQOff;		/* Synchronous Tx Queue Address Offset */
-	int		PXaQOff;		/* Asynchronous Tx Queue Address Offset */
-	int		PhyType;		/* PHY used on this port */
-	int		PState;			/* Port status (reset, stop, init, run) */
-	SK_U16	PhyId1;			/* PHY Id1 on this port */
-	SK_U16	PhyAddr;		/* MDIO/MDC PHY address */
-	SK_U16	PIsave;			/* Saved Interrupt status word */
-	SK_U16	PSsave;			/* Saved PHY status word */
-	SK_U16	PGmANegAdv;		/* Saved GPhy AutoNegAdvertisment register */
-	SK_BOOL	PHWLinkUp;		/* The hardware Link is up (wiring) */
-	SK_BOOL	PLinkBroken;	/* Is Link broken ? */
-	SK_BOOL	PCheckPar;		/* Do we check for parity errors ? */
-	SK_BOOL	HalfDupTimerActive;
-	SK_U8	PLinkCap;		/* Link Capabilities */
-	SK_U8	PLinkModeConf;	/* Link Mode configured */
-	SK_U8	PLinkMode;		/* Link Mode currently used */
-	SK_U8	PLinkModeStatus;/* Link Mode Status */
-	SK_U8	PLinkSpeedCap;	/* Link Speed Capabilities(10/100/1000 Mbps) */
-	SK_U8	PLinkSpeed;		/* configured Link Speed (10/100/1000 Mbps) */
-	SK_U8	PLinkSpeedUsed;	/* current Link Speed (10/100/1000 Mbps) */
-	SK_U8	PFlowCtrlCap;	/* Flow Control Capabilities */
-	SK_U8	PFlowCtrlMode;	/* Flow Control Mode */
-	SK_U8	PFlowCtrlStatus;/* Flow Control Status */
-	SK_U8	PMSCap;			/* Master/Slave Capabilities */
-	SK_U8	PMSMode;		/* Master/Slave Mode */
-	SK_U8	PMSStatus;		/* Master/Slave Status */
-	SK_BOOL	PAutoNegFail;	/* Auto-negotiation fail flag */
-	SK_U8	PLipaAutoNeg;	/* Auto-negotiation possible with Link Partner */
-	SK_U8	PCableLen;		/* Cable Length */
-	SK_U8	PMdiPairLen[4];	/* MDI[0..3] Pair Length */
-	SK_U8	PMdiPairSts[4];	/* MDI[0..3] Pair Diagnostic Status */
-	SK_U8	PPhyPowerState;	/* PHY current power state */
-	int		PMacColThres;	/* MAC Collision Threshold */
-	int		PMacJamLen;		/* MAC Jam length */
-	int		PMacJamIpgVal;	/* MAC Jam IPG */
-	int		PMacJamIpgData;	/* MAC IPG Jam to Data */
-	int		PMacIpgData;	/* MAC Data IPG */
-	SK_BOOL PMacLimit4;		/* reset collision counter and backoff algorithm */
-} SK_GEPORT;
-
-/*
- * Gigabit Ethernet Initialization Struct
- * (has to be included in the adapter context)
- */
-typedef	struct s_GeInit {
-	int			GIChipId;		/* Chip Identification Number */
-	int			GIChipRev;		/* Chip Revision Number */
-	SK_U8		GIPciHwRev;		/* PCI HW Revision Number */
-	SK_BOOL		GIGenesis;		/* Genesis adapter ? */
-	SK_BOOL		GIYukon;		/* YUKON-A1/Bx chip */
-	SK_BOOL		GIYukonLite;	/* YUKON-Lite chip */
-	SK_BOOL		GICopperType;	/* Copper Type adapter ? */
-	SK_BOOL		GIPciSlot64;	/* 64-bit PCI Slot */
-	SK_BOOL		GIPciClock66;	/* 66 MHz PCI Clock */
-	SK_BOOL		GIVauxAvail;	/* VAUX available (YUKON) */
-	SK_BOOL		GIYukon32Bit;	/* 32-Bit YUKON adapter */
-	SK_U16		GILedBlinkCtrl;	/* LED Blink Control */
-	int			GIMacsFound;	/* Number of MACs found on this adapter */
-	int			GIMacType;		/* MAC Type used on this adapter */
-	int			GIHstClkFact;	/* Host Clock Factor (62.5 / HstClk * 100) */
-	int			GIPortUsage;	/* Driver Port Usage */
-	int			GILevel;		/* Initialization Level completed */
-	int			GIRamSize;		/* The RAM size of the adapter in kB */
-	int			GIWolOffs;		/* WOL Register Offset (HW-Bug in Rev. A) */
-	SK_U32		GIRamOffs;		/* RAM Address Offset for addr calculation */
-	SK_U32		GIPollTimerVal;	/* Descr. Poll Timer Init Val (HstClk ticks) */
-	SK_U32		GIValIrqMask;	/* Value for Interrupt Mask */
-	SK_U32		GITimeStampCnt;	/* Time Stamp High Counter (YUKON only) */
-	SK_GEPORT	GP[SK_MAX_MACS];/* Port Dependent Information */
-	SK_GEMACFUNC GIFunc;		/* MAC depedent functions */
-} SK_GEINIT;
-
-/*
- * Error numbers and messages for skxmac2.c and skgeinit.c
- */
-#define SKERR_HWI_E001		(SK_ERRBASE_HWINIT)
-#define SKERR_HWI_E001MSG	"SkXmClrExactAddr() has got illegal parameters"
-#define SKERR_HWI_E002		(SKERR_HWI_E001+1)
-#define SKERR_HWI_E002MSG	"SkGeInit(): Level 1 call missing"
-#define SKERR_HWI_E003		(SKERR_HWI_E002+1)
-#define SKERR_HWI_E003MSG	"SkGeInit() called with illegal init Level"
-#define SKERR_HWI_E004		(SKERR_HWI_E003+1)
-#define SKERR_HWI_E004MSG	"SkGeInitPort(): Queue Size illegal configured"
-#define SKERR_HWI_E005		(SKERR_HWI_E004+1)
-#define SKERR_HWI_E005MSG	"SkGeInitPort(): cannot init running ports"
-#define SKERR_HWI_E006		(SKERR_HWI_E005+1)
-#define SKERR_HWI_E006MSG	"SkGeMacInit(): PState does not match HW state"
-#define SKERR_HWI_E007		(SKERR_HWI_E006+1)
-#define SKERR_HWI_E007MSG	"SkXmInitDupMd() called with invalid Dup Mode"
-#define SKERR_HWI_E008		(SKERR_HWI_E007+1)
-#define SKERR_HWI_E008MSG	"SkXmSetRxCmd() called with invalid Mode"
-#define SKERR_HWI_E009		(SKERR_HWI_E008+1)
-#define SKERR_HWI_E009MSG	"SkGeCfgSync() called although PXSQSize zero"
-#define SKERR_HWI_E010		(SKERR_HWI_E009+1)
-#define SKERR_HWI_E010MSG	"SkGeCfgSync() called with invalid parameters"
-#define SKERR_HWI_E011		(SKERR_HWI_E010+1)
-#define SKERR_HWI_E011MSG	"SkGeInitPort(): Receive Queue Size too small"
-#define SKERR_HWI_E012		(SKERR_HWI_E011+1)
-#define SKERR_HWI_E012MSG	"SkGeInitPort(): invalid Queue Size specified"
-#define SKERR_HWI_E013		(SKERR_HWI_E012+1)
-#define SKERR_HWI_E013MSG	"SkGeInitPort(): cfg changed for running queue"
-#define SKERR_HWI_E014		(SKERR_HWI_E013+1)
-#define SKERR_HWI_E014MSG	"SkGeInitPort(): unknown GIPortUsage specified"
-#define SKERR_HWI_E015		(SKERR_HWI_E014+1)
-#define SKERR_HWI_E015MSG	"Illegal Link mode parameter"
-#define SKERR_HWI_E016		(SKERR_HWI_E015+1)
-#define SKERR_HWI_E016MSG	"Illegal Flow control mode parameter"
-#define SKERR_HWI_E017		(SKERR_HWI_E016+1)
-#define SKERR_HWI_E017MSG	"Illegal value specified for GIPollTimerVal"
-#define SKERR_HWI_E018		(SKERR_HWI_E017+1)
-#define SKERR_HWI_E018MSG	"FATAL: SkGeStopPort() does not terminate (Tx)"
-#define SKERR_HWI_E019		(SKERR_HWI_E018+1)
-#define SKERR_HWI_E019MSG	"Illegal Speed parameter"
-#define SKERR_HWI_E020		(SKERR_HWI_E019+1)
-#define SKERR_HWI_E020MSG	"Illegal Master/Slave parameter"
-#define SKERR_HWI_E021		(SKERR_HWI_E020+1)
-#define	SKERR_HWI_E021MSG	"MacUpdateStats(): cannot update statistic counter"
-#define	SKERR_HWI_E022		(SKERR_HWI_E021+1)
-#define	SKERR_HWI_E022MSG	"MacStatistic(): illegal statistic base address"
-#define SKERR_HWI_E023		(SKERR_HWI_E022+1)
-#define SKERR_HWI_E023MSG	"SkGeInitPort(): Transmit Queue Size too small"
-#define SKERR_HWI_E024		(SKERR_HWI_E023+1)
-#define SKERR_HWI_E024MSG	"FATAL: SkGeStopPort() does not terminate (Rx)"
-#define SKERR_HWI_E025		(SKERR_HWI_E024+1)
-#define SKERR_HWI_E025MSG	""
-
-/* function prototypes ********************************************************/
-
-#ifndef	SK_KR_PROTO
-
-/*
- * public functions in skgeinit.c
- */
-extern void	SkGePollTxD(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL PollTxD);
-
-extern void	SkGeYellowLED(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		State);
-
-extern int	SkGeCfgSync(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_U32	IntTime,
-	SK_U32	LimCount,
-	int		SyncMode);
-
-extern void	SkGeLoadLnkSyncCnt(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_U32	CntVal);
-
-extern void	SkGeStopPort(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Dir,
-	int		RstMode);
-
-extern int	SkGeInit(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Level);
-
-extern void	SkGeDeInit(
-	SK_AC	*pAC,
-	SK_IOC	IoC);
-
-extern int	SkGeInitPort(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkGeXmitLED(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Led,
-	int		Mode);
-
-extern int	SkGeInitAssignRamToQueues(
-	SK_AC	*pAC,
-	int		ActivePort,
-	SK_BOOL	DualNet);
-
-/*
- * public functions in skxmac2.c
- */
-extern void SkMacRxTxDisable(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkMacSoftRst(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkMacHardRst(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkXmInitMac(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkGmInitMac(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void SkMacInitPhy(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL	DoLoop);
-
-extern void SkMacIrqDisable(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkMacFlushTxFifo(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkMacIrq(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern int	SkMacAutoNegDone(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkMacAutoNegLipaPhy(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_U16	IStatus);
-
-extern int  SkMacRxTxEnable(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkMacPromiscMode(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL	Enable);
-
-extern void	SkMacHashing(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL	Enable);
-
-extern void	SkXmPhyRead(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Addr,
-	SK_U16	SK_FAR *pVal);
-
-extern void	SkXmPhyWrite(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Addr,
-	SK_U16	Val);
-
-extern void	SkGmPhyRead(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Addr,
-	SK_U16	SK_FAR *pVal);
-
-extern void	SkGmPhyWrite(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Addr,
-	SK_U16	Val);
-
-extern void	SkXmClrExactAddr(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		StartNum,
-	int		StopNum);
-
-extern void	SkXmAutoNegLipaXmac(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_U16	IStatus);
-
-extern int SkXmUpdateStats(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port);
-
-extern int SkGmUpdateStats(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port);
-
-extern int SkXmMacStatistic(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port,
-	SK_U16	StatAddr,
-	SK_U32	SK_FAR *pVal);
-
-extern int SkGmMacStatistic(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port,
-	SK_U16	StatAddr,
-	SK_U32	SK_FAR *pVal);
-
-extern int SkXmResetCounter(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port);
-
-extern int SkGmResetCounter(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port);
-
-extern int SkXmOverflowStatus(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port,
-	SK_U16  IStatus,
-	SK_U64	SK_FAR *pStatus);
-
-extern int SkGmOverflowStatus(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port,
-	SK_U16	MacStatus,
-	SK_U64	SK_FAR *pStatus);
-
-extern int SkGmCableDiagStatus(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL	StartTest);
-
-#ifdef SK_DIAG
-extern void	SkGePhyRead(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Addr,
-	SK_U16	*pVal);
-
-extern void	SkGePhyWrite(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Addr,
-	SK_U16	Val);
-
-extern void	SkMacSetRxCmd(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Mode);
-extern void	SkMacCrcGener(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL	Enable);
-extern void	SkMacTimeStamp(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL	Enable);
-extern void	SkXmSendCont(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL	Enable);
-#endif /* SK_DIAG */
-
-#else	/* SK_KR_PROTO */
-
-/*
- * public functions in skgeinit.c
- */
-extern void	SkGePollTxD();
-extern void	SkGeYellowLED();
-extern int	SkGeCfgSync();
-extern void	SkGeLoadLnkSyncCnt();
-extern void	SkGeStopPort();
-extern int	SkGeInit();
-extern void	SkGeDeInit();
-extern int	SkGeInitPort();
-extern void	SkGeXmitLED();
-extern int	SkGeInitAssignRamToQueues();
-
-/*
- * public functions in skxmac2.c
- */
-extern void SkMacRxTxDisable();
-extern void	SkMacSoftRst();
-extern void	SkMacHardRst();
-extern void SkMacInitPhy();
-extern int  SkMacRxTxEnable();
-extern void SkMacPromiscMode();
-extern void SkMacHashing();
-extern void SkMacIrqDisable();
-extern void	SkMacFlushTxFifo();
-extern void	SkMacIrq();
-extern int	SkMacAutoNegDone();
-extern void	SkMacAutoNegLipaPhy();
-extern void	SkXmInitMac();
-extern void	SkXmPhyRead();
-extern void	SkXmPhyWrite();
-extern void	SkGmInitMac();
-extern void	SkGmPhyRead();
-extern void	SkGmPhyWrite();
-extern void	SkXmClrExactAddr();
-extern void	SkXmAutoNegLipaXmac();
-extern int	SkXmUpdateStats();
-extern int	SkGmUpdateStats();
-extern int	SkXmMacStatistic();
-extern int	SkGmMacStatistic();
-extern int	SkXmResetCounter();
-extern int	SkGmResetCounter();
-extern int	SkXmOverflowStatus();
-extern int	SkGmOverflowStatus();
-extern int	SkGmCableDiagStatus();
-
-#ifdef SK_DIAG
-extern void	SkGePhyRead();
-extern void	SkGePhyWrite();
-extern void	SkMacSetRxCmd();
-extern void	SkMacCrcGener();
-extern void	SkMacTimeStamp();
-extern void	SkXmSendCont();
-#endif /* SK_DIAG */
-
-#endif	/* SK_KR_PROTO */
-
-#ifdef __cplusplus
-}
-#endif	/* __cplusplus */
-
-#endif	/* __INC_SKGEINIT_H_ */