mac80211: rewrite HT handling

The HT handling has the following deficiencies, which I've
(partially) fixed:
 * it always uses the AP info even if there is no AP,
   hence has no chance of working as an AP
 * it pretends to be HW config, but really is per-BSS
 * channel sanity checking is left to the drivers
 * it generally lets the driver control too much

HT enabling is still wrong with this patch if you have more than
one virtual STA mode interface, but that never happens currently.
Once WDS, IBSS or AP/VLAN gets HT capabilities, it will also be
wrong, see the comment in ieee80211_enable_ht().

Additionally, this fixes a number of bugs:
 * mac80211: ieee80211_set_disassoc doesn't notify the driver any
             more since the refactoring
 * iwl-agn-rs: always uses the HT capabilities from the wrong stuff
               mac80211 gives it rather than the actual peer STA
 * ath9k: a number of bugs resulting from the broken HT API

I'm not entirely happy with putting the HT capabilities into
struct ieee80211_sta as restricted to our own HT TX capabilities,
but I see no cleaner solution for now.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 10 insertions, 7 deletions

diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index 3770fbe84fc..ba818cc2fb5 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -300,7 +300,8 @@ static int ath_tx_prepare(struct ath_softc *sc,
 	if (ieee80211_is_data(fc) && !txctl->use_minrate) {
 
 		/* Enable HT only for DATA frames and not for EAPOL */
-		txctl->ht = (hw->conf.ht_cap.ht_supported &&
+		/* XXX why AMPDU only?? */
+		txctl->ht = (hw->conf.ht.enabled &&
 			    (tx_info->flags & IEEE80211_TX_CTL_AMPDU));
 
 		if (is_multicast_ether_addr(hdr->addr1)) {
@@ -1450,7 +1451,8 @@ static int ath_tx_send_ampdu(struct ath_softc *sc,
  */
 
 static u32 ath_lookup_rate(struct ath_softc *sc,
-				 struct ath_buf *bf)
+			   struct ath_buf *bf,
+			   struct ath_atx_tid *tid)
 {
 	const struct ath9k_rate_table *rt = sc->sc_currates;
 	struct sk_buff *skb;
@@ -1504,7 +1506,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc,
 	 * The IE, however can hold upto 65536, which shows up here
 	 * as zero. Ignore 65536 since we  are constrained by hw.
 	 */
-	maxampdu = sc->sc_ht_info.maxampdu;
+	maxampdu = tid->an->maxampdu;
 	if (maxampdu)
 		aggr_limit = min(aggr_limit, maxampdu);
 
@@ -1518,6 +1520,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc,
  */
 
 static int ath_compute_num_delims(struct ath_softc *sc,
+				  struct ath_atx_tid *tid,
 				  struct ath_buf *bf,
 				  u16 frmlen)
 {
@@ -1545,7 +1548,7 @@ static int ath_compute_num_delims(struct ath_softc *sc,
 	 * required minimum length for subframe. Take into account
 	 * whether high rate is 20 or 40Mhz and half or full GI.
 	 */
-	mpdudensity = sc->sc_ht_info.mpdudensity;
+	mpdudensity = tid->an->mpdudensity;
 
 	/*
 	 * If there is no mpdu density restriction, no further calculation
@@ -1619,7 +1622,7 @@ static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
 		}
 
 		if (!rl) {
-			aggr_limit = ath_lookup_rate(sc, bf);
+			aggr_limit = ath_lookup_rate(sc, bf, tid);
 			rl = 1;
 			/*
 			 * Is rate dual stream
@@ -1657,7 +1660,7 @@ static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
 		 * Get the delimiters needed to meet the MPDU
 		 * density for this node.
 		 */
-		ndelim = ath_compute_num_delims(sc, bf_first, bf->bf_frmlen);
+		ndelim = ath_compute_num_delims(sc, tid, bf_first, bf->bf_frmlen);
 
 		bpad = PADBYTES(al_delta) + (ndelim << 2);
 
@@ -2629,7 +2632,7 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an)
 		struct ath_atx_ac *ac;
 		int tidno, acno;
 
-		sc->sc_ht_info.maxampdu = ATH_AMPDU_LIMIT_DEFAULT;
+		an->maxampdu = ATH_AMPDU_LIMIT_DEFAULT;
 
 		/*
 		 * Init per tid tx state