Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

1 files changed, 760 insertions, 0 deletions

diff --git a/drivers/net/wireless/ipw2x00/libipw_wx.c b/drivers/net/wireless/ipw2x00/libipw_wx.c
new file mode 100644
index 00000000000..31ea3abfc32
--- /dev/null
+++ b/drivers/net/wireless/ipw2x00/libipw_wx.c
@@ -0,0 +1,760 @@
+/******************************************************************************
+
+  Copyright(c) 2004-2005 Intel Corporation. All rights reserved.
+
+  Portions of this file are based on the WEP enablement code provided by the
+  Host AP project hostap-drivers v0.1.3
+  Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+  <j@w1.fi>
+  Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms of version 2 of the GNU General Public License as
+  published by the Free Software Foundation.
+
+  This program is distributed in the hope that it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc., 59
+  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+
+  The full GNU General Public License is included in this distribution in the
+  file called LICENSE.
+
+  Contact Information:
+  James P. Ketrenos <ipw2100-admin@linux.intel.com>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+******************************************************************************/
+
+#include <linux/kmod.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+
+#include <net/lib80211.h>
+#include <net/ieee80211.h>
+#include <linux/wireless.h>
+
+static const char *ieee80211_modes[] = {
+	"?", "a", "b", "ab", "g", "ag", "bg", "abg"
+};
+
+#define MAX_CUSTOM_LEN 64
+static char *ieee80211_translate_scan(struct ieee80211_device *ieee,
+				      char *start, char *stop,
+				      struct ieee80211_network *network,
+				      struct iw_request_info *info)
+{
+	char custom[MAX_CUSTOM_LEN];
+	char *p;
+	struct iw_event iwe;
+	int i, j;
+	char *current_val;	/* For rates */
+	u8 rate;
+
+	/* First entry *MUST* be the AP MAC address */
+	iwe.cmd = SIOCGIWAP;
+	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+	memcpy(iwe.u.ap_addr.sa_data, network->bssid, ETH_ALEN);
+	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_ADDR_LEN);
+
+	/* Remaining entries will be displayed in the order we provide them */
+
+	/* Add the ESSID */
+	iwe.cmd = SIOCGIWESSID;
+	iwe.u.data.flags = 1;
+	iwe.u.data.length = min(network->ssid_len, (u8) 32);
+	start = iwe_stream_add_point(info, start, stop,
+				     &iwe, network->ssid);
+
+	/* Add the protocol name */
+	iwe.cmd = SIOCGIWNAME;
+	snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11%s",
+		 ieee80211_modes[network->mode]);
+	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_CHAR_LEN);
+
+	/* Add mode */
+	iwe.cmd = SIOCGIWMODE;
+	if (network->capability & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
+		if (network->capability & WLAN_CAPABILITY_ESS)
+			iwe.u.mode = IW_MODE_MASTER;
+		else
+			iwe.u.mode = IW_MODE_ADHOC;
+
+		start = iwe_stream_add_event(info, start, stop,
+					     &iwe, IW_EV_UINT_LEN);
+	}
+
+	/* Add channel and frequency */
+	/* Note : userspace automatically computes channel using iwrange */
+	iwe.cmd = SIOCGIWFREQ;
+	iwe.u.freq.m = ieee80211_channel_to_freq(ieee, network->channel);
+	iwe.u.freq.e = 6;
+	iwe.u.freq.i = 0;
+	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_FREQ_LEN);
+
+	/* Add encryption capability */
+	iwe.cmd = SIOCGIWENCODE;
+	if (network->capability & WLAN_CAPABILITY_PRIVACY)
+		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+	else
+		iwe.u.data.flags = IW_ENCODE_DISABLED;
+	iwe.u.data.length = 0;
+	start = iwe_stream_add_point(info, start, stop,
+				     &iwe, network->ssid);
+
+	/* Add basic and extended rates */
+	/* Rate : stuffing multiple values in a single event require a bit
+	 * more of magic - Jean II */
+	current_val = start + iwe_stream_lcp_len(info);
+	iwe.cmd = SIOCGIWRATE;
+	/* Those two flags are ignored... */
+	iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+
+	for (i = 0, j = 0; i < network->rates_len;) {
+		if (j < network->rates_ex_len &&
+		    ((network->rates_ex[j] & 0x7F) <
+		     (network->rates[i] & 0x7F)))
+			rate = network->rates_ex[j++] & 0x7F;
+		else
+			rate = network->rates[i++] & 0x7F;
+		/* Bit rate given in 500 kb/s units (+ 0x80) */
+		iwe.u.bitrate.value = ((rate & 0x7f) * 500000);
+		/* Add new value to event */
+		current_val = iwe_stream_add_value(info, start, current_val,
+						   stop, &iwe, IW_EV_PARAM_LEN);
+	}
+	for (; j < network->rates_ex_len; j++) {
+		rate = network->rates_ex[j] & 0x7F;
+		/* Bit rate given in 500 kb/s units (+ 0x80) */
+		iwe.u.bitrate.value = ((rate & 0x7f) * 500000);
+		/* Add new value to event */
+		current_val = iwe_stream_add_value(info, start, current_val,
+						   stop, &iwe, IW_EV_PARAM_LEN);
+	}
+	/* Check if we added any rate */
+	if ((current_val - start) > iwe_stream_lcp_len(info))
+		start = current_val;
+
+	/* Add quality statistics */
+	iwe.cmd = IWEVQUAL;
+	iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED |
+	    IW_QUAL_NOISE_UPDATED;
+
+	if (!(network->stats.mask & IEEE80211_STATMASK_RSSI)) {
+		iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID |
+		    IW_QUAL_LEVEL_INVALID;
+		iwe.u.qual.qual = 0;
+	} else {
+		if (ieee->perfect_rssi == ieee->worst_rssi)
+			iwe.u.qual.qual = 100;
+		else
+			iwe.u.qual.qual =
+			    (100 *
+			     (ieee->perfect_rssi - ieee->worst_rssi) *
+			     (ieee->perfect_rssi - ieee->worst_rssi) -
+			     (ieee->perfect_rssi - network->stats.rssi) *
+			     (15 * (ieee->perfect_rssi - ieee->worst_rssi) +
+			      62 * (ieee->perfect_rssi -
+				    network->stats.rssi))) /
+			    ((ieee->perfect_rssi -
+			      ieee->worst_rssi) * (ieee->perfect_rssi -
+						   ieee->worst_rssi));
+		if (iwe.u.qual.qual > 100)
+			iwe.u.qual.qual = 100;
+		else if (iwe.u.qual.qual < 1)
+			iwe.u.qual.qual = 0;
+	}
+
+	if (!(network->stats.mask & IEEE80211_STATMASK_NOISE)) {
+		iwe.u.qual.updated |= IW_QUAL_NOISE_INVALID;
+		iwe.u.qual.noise = 0;
+	} else {
+		iwe.u.qual.noise = network->stats.noise;
+	}
+
+	if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL)) {
+		iwe.u.qual.updated |= IW_QUAL_LEVEL_INVALID;
+		iwe.u.qual.level = 0;
+	} else {
+		iwe.u.qual.level = network->stats.signal;
+	}
+
+	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_QUAL_LEN);
+
+	iwe.cmd = IWEVCUSTOM;
+	p = custom;
+
+	iwe.u.data.length = p - custom;
+	if (iwe.u.data.length)
+		start = iwe_stream_add_point(info, start, stop, &iwe, custom);
+
+	memset(&iwe, 0, sizeof(iwe));
+	if (network->wpa_ie_len) {
+		char buf[MAX_WPA_IE_LEN];
+		memcpy(buf, network->wpa_ie, network->wpa_ie_len);
+		iwe.cmd = IWEVGENIE;
+		iwe.u.data.length = network->wpa_ie_len;
+		start = iwe_stream_add_point(info, start, stop, &iwe, buf);
+	}
+
+	memset(&iwe, 0, sizeof(iwe));
+	if (network->rsn_ie_len) {
+		char buf[MAX_WPA_IE_LEN];
+		memcpy(buf, network->rsn_ie, network->rsn_ie_len);
+		iwe.cmd = IWEVGENIE;
+		iwe.u.data.length = network->rsn_ie_len;
+		start = iwe_stream_add_point(info, start, stop, &iwe, buf);
+	}
+
+	/* Add EXTRA: Age to display seconds since last beacon/probe response
+	 * for given network. */
+	iwe.cmd = IWEVCUSTOM;
+	p = custom;
+	p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
+		      " Last beacon: %dms ago",
+		      jiffies_to_msecs(jiffies - network->last_scanned));
+	iwe.u.data.length = p - custom;
+	if (iwe.u.data.length)
+		start = iwe_stream_add_point(info, start, stop, &iwe, custom);
+
+	/* Add spectrum management information */
+	iwe.cmd = -1;
+	p = custom;
+	p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Channel flags: ");
+
+	if (ieee80211_get_channel_flags(ieee, network->channel) &
+	    IEEE80211_CH_INVALID) {
+		iwe.cmd = IWEVCUSTOM;
+		p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), "INVALID ");
+	}
+
+	if (ieee80211_get_channel_flags(ieee, network->channel) &
+	    IEEE80211_CH_RADAR_DETECT) {
+		iwe.cmd = IWEVCUSTOM;
+		p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), "DFS ");
+	}
+
+	if (iwe.cmd == IWEVCUSTOM) {
+		iwe.u.data.length = p - custom;
+		start = iwe_stream_add_point(info, start, stop, &iwe, custom);
+	}
+
+	return start;
+}
+
+#define SCAN_ITEM_SIZE 128
+
+int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
+			  struct iw_request_info *info,
+			  union iwreq_data *wrqu, char *extra)
+{
+	struct ieee80211_network *network;
+	unsigned long flags;
+	int err = 0;
+
+	char *ev = extra;
+	char *stop = ev + wrqu->data.length;
+	int i = 0;
+	DECLARE_SSID_BUF(ssid);
+
+	IEEE80211_DEBUG_WX("Getting scan\n");
+
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	list_for_each_entry(network, &ieee->network_list, list) {
+		i++;
+		if (stop - ev < SCAN_ITEM_SIZE) {
+			err = -E2BIG;
+			break;
+		}
+
+		if (ieee->scan_age == 0 ||
+		    time_after(network->last_scanned + ieee->scan_age, jiffies))
+			ev = ieee80211_translate_scan(ieee, ev, stop, network,
+						      info);
+		else
+			IEEE80211_DEBUG_SCAN("Not showing network '%s ("
+					     "%pM)' due to age (%dms).\n",
+					     print_ssid(ssid, network->ssid,
+							 network->ssid_len),
+					     network->bssid,
+					     jiffies_to_msecs(jiffies -
+							      network->
+							      last_scanned));
+	}
+
+	spin_unlock_irqrestore(&ieee->lock, flags);
+
+	wrqu->data.length = ev - extra;
+	wrqu->data.flags = 0;
+
+	IEEE80211_DEBUG_WX("exit: %d networks returned.\n", i);
+
+	return err;
+}
+
+int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu, char *keybuf)
+{
+	struct iw_point *erq = &(wrqu->encoding);
+	struct net_device *dev = ieee->dev;
+	struct ieee80211_security sec = {
+		.flags = 0
+	};
+	int i, key, key_provided, len;
+	struct lib80211_crypt_data **crypt;
+	int host_crypto = ieee->host_encrypt || ieee->host_decrypt || ieee->host_build_iv;
+	DECLARE_SSID_BUF(ssid);
+
+	IEEE80211_DEBUG_WX("SET_ENCODE\n");
+
+	key = erq->flags & IW_ENCODE_INDEX;
+	if (key) {
+		if (key > WEP_KEYS)
+			return -EINVAL;
+		key--;
+		key_provided = 1;
+	} else {
+		key_provided = 0;
+		key = ieee->crypt_info.tx_keyidx;
+	}
+
+	IEEE80211_DEBUG_WX("Key: %d [%s]\n", key, key_provided ?
+			   "provided" : "default");
+
+	crypt = &ieee->crypt_info.crypt[key];
+
+	if (erq->flags & IW_ENCODE_DISABLED) {
+		if (key_provided && *crypt) {
+			IEEE80211_DEBUG_WX("Disabling encryption on key %d.\n",
+					   key);
+			lib80211_crypt_delayed_deinit(&ieee->crypt_info, crypt);
+		} else
+			IEEE80211_DEBUG_WX("Disabling encryption.\n");
+
+		/* Check all the keys to see if any are still configured,
+		 * and if no key index was provided, de-init them all */
+		for (i = 0; i < WEP_KEYS; i++) {
+			if (ieee->crypt_info.crypt[i] != NULL) {
+				if (key_provided)
+					break;
+				lib80211_crypt_delayed_deinit(&ieee->crypt_info,
+							       &ieee->crypt_info.crypt[i]);
+			}
+		}
+
+		if (i == WEP_KEYS) {
+			sec.enabled = 0;
+			sec.encrypt = 0;
+			sec.level = SEC_LEVEL_0;
+			sec.flags |= SEC_ENABLED | SEC_LEVEL | SEC_ENCRYPT;
+		}
+
+		goto done;
+	}
+
+	sec.enabled = 1;
+	sec.encrypt = 1;
+	sec.flags |= SEC_ENABLED | SEC_ENCRYPT;
+
+	if (*crypt != NULL && (*crypt)->ops != NULL &&
+	    strcmp((*crypt)->ops->name, "WEP") != 0) {
+		/* changing to use WEP; deinit previously used algorithm
+		 * on this key */
+		lib80211_crypt_delayed_deinit(&ieee->crypt_info, crypt);
+	}
+
+	if (*crypt == NULL && host_crypto) {
+		struct lib80211_crypt_data *new_crypt;
+
+		/* take WEP into use */
+		new_crypt = kzalloc(sizeof(struct lib80211_crypt_data),
+				    GFP_KERNEL);
+		if (new_crypt == NULL)
+			return -ENOMEM;
+		new_crypt->ops = lib80211_get_crypto_ops("WEP");
+		if (!new_crypt->ops) {
+			request_module("lib80211_crypt_wep");
+			new_crypt->ops = lib80211_get_crypto_ops("WEP");
+		}
+
+		if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+			new_crypt->priv = new_crypt->ops->init(key);
+
+		if (!new_crypt->ops || !new_crypt->priv) {
+			kfree(new_crypt);
+			new_crypt = NULL;
+
+			printk(KERN_WARNING "%s: could not initialize WEP: "
+			       "load module lib80211_crypt_wep\n", dev->name);
+			return -EOPNOTSUPP;
+		}
+		*crypt = new_crypt;
+	}
+
+	/* If a new key was provided, set it up */
+	if (erq->length > 0) {
+#ifdef CONFIG_IEEE80211_DEBUG
+		DECLARE_SSID_BUF(ssid);
+#endif
+
+		len = erq->length <= 5 ? 5 : 13;
+		memcpy(sec.keys[key], keybuf, erq->length);
+		if (len > erq->length)
+			memset(sec.keys[key] + erq->length, 0,
+			       len - erq->length);
+		IEEE80211_DEBUG_WX("Setting key %d to '%s' (%d:%d bytes)\n",
+				   key, print_ssid(ssid, sec.keys[key], len),
+				   erq->length, len);
+		sec.key_sizes[key] = len;
+		if (*crypt)
+			(*crypt)->ops->set_key(sec.keys[key], len, NULL,
+					       (*crypt)->priv);
+		sec.flags |= (1 << key);
+		/* This ensures a key will be activated if no key is
+		 * explicitly set */
+		if (key == sec.active_key)
+			sec.flags |= SEC_ACTIVE_KEY;
+
+	} else {
+		if (host_crypto) {
+			len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN,
+						     NULL, (*crypt)->priv);
+			if (len == 0) {
+				/* Set a default key of all 0 */
+				IEEE80211_DEBUG_WX("Setting key %d to all "
+						   "zero.\n", key);
+				memset(sec.keys[key], 0, 13);
+				(*crypt)->ops->set_key(sec.keys[key], 13, NULL,
+						       (*crypt)->priv);
+				sec.key_sizes[key] = 13;
+				sec.flags |= (1 << key);
+			}
+		}
+		/* No key data - just set the default TX key index */
+		if (key_provided) {
+			IEEE80211_DEBUG_WX("Setting key %d to default Tx "
+					   "key.\n", key);
+			ieee->crypt_info.tx_keyidx = key;
+			sec.active_key = key;
+			sec.flags |= SEC_ACTIVE_KEY;
+		}
+	}
+	if (erq->flags & (IW_ENCODE_OPEN | IW_ENCODE_RESTRICTED)) {
+		ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED);
+		sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN :
+		    WLAN_AUTH_SHARED_KEY;
+		sec.flags |= SEC_AUTH_MODE;
+		IEEE80211_DEBUG_WX("Auth: %s\n",
+				   sec.auth_mode == WLAN_AUTH_OPEN ?
+				   "OPEN" : "SHARED KEY");
+	}
+
+	/* For now we just support WEP, so only set that security level...
+	 * TODO: When WPA is added this is one place that needs to change */
+	sec.flags |= SEC_LEVEL;
+	sec.level = SEC_LEVEL_1;	/* 40 and 104 bit WEP */
+	sec.encode_alg[key] = SEC_ALG_WEP;
+
+      done:
+	if (ieee->set_security)
+		ieee->set_security(dev, &sec);
+
+	/* Do not reset port if card is in Managed mode since resetting will
+	 * generate new IEEE 802.11 authentication which may end up in looping
+	 * with IEEE 802.1X.  If your hardware requires a reset after WEP
+	 * configuration (for example... Prism2), implement the reset_port in
+	 * the callbacks structures used to initialize the 802.11 stack. */
+	if (ieee->reset_on_keychange &&
+	    ieee->iw_mode != IW_MODE_INFRA &&
+	    ieee->reset_port && ieee->reset_port(dev)) {
+		printk(KERN_DEBUG "%s: reset_port failed\n", dev->name);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu, char *keybuf)
+{
+	struct iw_point *erq = &(wrqu->encoding);
+	int len, key;
+	struct lib80211_crypt_data *crypt;
+	struct ieee80211_security *sec = &ieee->sec;
+
+	IEEE80211_DEBUG_WX("GET_ENCODE\n");
+
+	key = erq->flags & IW_ENCODE_INDEX;
+	if (key) {
+		if (key > WEP_KEYS)
+			return -EINVAL;
+		key--;
+	} else
+		key = ieee->crypt_info.tx_keyidx;
+
+	crypt = ieee->crypt_info.crypt[key];
+	erq->flags = key + 1;
+
+	if (!sec->enabled) {
+		erq->length = 0;
+		erq->flags |= IW_ENCODE_DISABLED;
+		return 0;
+	}
+
+	len = sec->key_sizes[key];
+	memcpy(keybuf, sec->keys[key], len);
+
+	erq->length = len;
+	erq->flags |= IW_ENCODE_ENABLED;
+
+	if (ieee->open_wep)
+		erq->flags |= IW_ENCODE_OPEN;
+	else
+		erq->flags |= IW_ENCODE_RESTRICTED;
+
+	return 0;
+}
+
+int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee,
+			       struct iw_request_info *info,
+			       union iwreq_data *wrqu, char *extra)
+{
+	struct net_device *dev = ieee->dev;
+	struct iw_point *encoding = &wrqu->encoding;
+	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+	int i, idx, ret = 0;
+	int group_key = 0;
+	const char *alg, *module;
+	struct lib80211_crypto_ops *ops;
+	struct lib80211_crypt_data **crypt;
+
+	struct ieee80211_security sec = {
+		.flags = 0,
+	};
+
+	idx = encoding->flags & IW_ENCODE_INDEX;
+	if (idx) {
+		if (idx < 1 || idx > WEP_KEYS)
+			return -EINVAL;
+		idx--;
+	} else
+		idx = ieee->crypt_info.tx_keyidx;
+
+	if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
+		crypt = &ieee->crypt_info.crypt[idx];
+		group_key = 1;
+	} else {
+		/* some Cisco APs use idx>0 for unicast in dynamic WEP */
+		if (idx != 0 && ext->alg != IW_ENCODE_ALG_WEP)
+			return -EINVAL;
+		if (ieee->iw_mode == IW_MODE_INFRA)
+			crypt = &ieee->crypt_info.crypt[idx];
+		else
+			return -EINVAL;
+	}
+
+	sec.flags |= SEC_ENABLED | SEC_ENCRYPT;
+	if ((encoding->flags & IW_ENCODE_DISABLED) ||
+	    ext->alg == IW_ENCODE_ALG_NONE) {
+		if (*crypt)
+			lib80211_crypt_delayed_deinit(&ieee->crypt_info, crypt);
+
+		for (i = 0; i < WEP_KEYS; i++)
+			if (ieee->crypt_info.crypt[i] != NULL)
+				break;
+
+		if (i == WEP_KEYS) {
+			sec.enabled = 0;
+			sec.encrypt = 0;
+			sec.level = SEC_LEVEL_0;
+			sec.flags |= SEC_LEVEL;
+		}
+		goto done;
+	}
+
+	sec.enabled = 1;
+	sec.encrypt = 1;
+
+	if (group_key ? !ieee->host_mc_decrypt :
+	    !(ieee->host_encrypt || ieee->host_decrypt ||
+	      ieee->host_encrypt_msdu))
+		goto skip_host_crypt;
+
+	switch (ext->alg) {
+	case IW_ENCODE_ALG_WEP:
+		alg = "WEP";
+		module = "lib80211_crypt_wep";
+		break;
+	case IW_ENCODE_ALG_TKIP:
+		alg = "TKIP";
+		module = "lib80211_crypt_tkip";
+		break;
+	case IW_ENCODE_ALG_CCMP:
+		alg = "CCMP";
+		module = "lib80211_crypt_ccmp";
+		break;
+	default:
+		IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
+				   dev->name, ext->alg);
+		ret = -EINVAL;
+		goto done;
+	}
+
+	ops = lib80211_get_crypto_ops(alg);
+	if (ops == NULL) {
+		request_module(module);
+		ops = lib80211_get_crypto_ops(alg);
+	}
+	if (ops == NULL) {
+		IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
+				   dev->name, ext->alg);
+		ret = -EINVAL;
+		goto done;
+	}
+
+	if (*crypt == NULL || (*crypt)->ops != ops) {
+		struct lib80211_crypt_data *new_crypt;
+
+		lib80211_crypt_delayed_deinit(&ieee->crypt_info, crypt);
+
+		new_crypt = kzalloc(sizeof(*new_crypt), GFP_KERNEL);
+		if (new_crypt == NULL) {
+			ret = -ENOMEM;
+			goto done;
+		}
+		new_crypt->ops = ops;
+		if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+			new_crypt->priv = new_crypt->ops->init(idx);
+		if (new_crypt->priv == NULL) {
+			kfree(new_crypt);
+			ret = -EINVAL;
+			goto done;
+		}
+		*crypt = new_crypt;
+	}
+
+	if (ext->key_len > 0 && (*crypt)->ops->set_key &&
+	    (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq,
+				   (*crypt)->priv) < 0) {
+		IEEE80211_DEBUG_WX("%s: key setting failed\n", dev->name);
+		ret = -EINVAL;
+		goto done;
+	}
+
+      skip_host_crypt:
+	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+		ieee->crypt_info.tx_keyidx = idx;
+		sec.active_key = idx;
+		sec.flags |= SEC_ACTIVE_KEY;
+	}
+
+	if (ext->alg != IW_ENCODE_ALG_NONE) {
+		memcpy(sec.keys[idx], ext->key, ext->key_len);
+		sec.key_sizes[idx] = ext->key_len;
+		sec.flags |= (1 << idx);
+		if (ext->alg == IW_ENCODE_ALG_WEP) {
+			sec.encode_alg[idx] = SEC_ALG_WEP;
+			sec.flags |= SEC_LEVEL;
+			sec.level = SEC_LEVEL_1;
+		} else if (ext->alg == IW_ENCODE_ALG_TKIP) {
+			sec.encode_alg[idx] = SEC_ALG_TKIP;
+			sec.flags |= SEC_LEVEL;
+			sec.level = SEC_LEVEL_2;
+		} else if (ext->alg == IW_ENCODE_ALG_CCMP) {
+			sec.encode_alg[idx] = SEC_ALG_CCMP;
+			sec.flags |= SEC_LEVEL;
+			sec.level = SEC_LEVEL_3;
+		}
+		/* Don't set sec level for group keys. */
+		if (group_key)
+			sec.flags &= ~SEC_LEVEL;
+	}
+      done:
+	if (ieee->set_security)
+		ieee->set_security(ieee->dev, &sec);
+
+	/*
+	 * Do not reset port if card is in Managed mode since resetting will
+	 * generate new IEEE 802.11 authentication which may end up in looping
+	 * with IEEE 802.1X. If your hardware requires a reset after WEP
+	 * configuration (for example... Prism2), implement the reset_port in
+	 * the callbacks structures used to initialize the 802.11 stack.
+	 */
+	if (ieee->reset_on_keychange &&
+	    ieee->iw_mode != IW_MODE_INFRA &&
+	    ieee->reset_port && ieee->reset_port(dev)) {
+		IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee,
+			       struct iw_request_info *info,
+			       union iwreq_data *wrqu, char *extra)
+{
+	struct iw_point *encoding = &wrqu->encoding;
+	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+	struct ieee80211_security *sec = &ieee->sec;
+	int idx, max_key_len;
+
+	max_key_len = encoding->length - sizeof(*ext);
+	if (max_key_len < 0)
+		return -EINVAL;
+
+	idx = encoding->flags & IW_ENCODE_INDEX;
+	if (idx) {
+		if (idx < 1 || idx > WEP_KEYS)
+			return -EINVAL;
+		idx--;
+	} else
+		idx = ieee->crypt_info.tx_keyidx;
+
+	if (!(ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) &&
+	    ext->alg != IW_ENCODE_ALG_WEP)
+		if (idx != 0 || ieee->iw_mode != IW_MODE_INFRA)
+			return -EINVAL;
+
+	encoding->flags = idx + 1;
+	memset(ext, 0, sizeof(*ext));
+
+	if (!sec->enabled) {
+		ext->alg = IW_ENCODE_ALG_NONE;
+		ext->key_len = 0;
+		encoding->flags |= IW_ENCODE_DISABLED;
+	} else {
+		if (sec->encode_alg[idx] == SEC_ALG_WEP)
+			ext->alg = IW_ENCODE_ALG_WEP;
+		else if (sec->encode_alg[idx] == SEC_ALG_TKIP)
+			ext->alg = IW_ENCODE_ALG_TKIP;
+		else if (sec->encode_alg[idx] == SEC_ALG_CCMP)
+			ext->alg = IW_ENCODE_ALG_CCMP;
+		else
+			return -EINVAL;
+
+		ext->key_len = sec->key_sizes[idx];
+		memcpy(ext->key, sec->keys[idx], ext->key_len);
+		encoding->flags |= IW_ENCODE_ENABLED;
+		if (ext->key_len &&
+		    (ext->alg == IW_ENCODE_ALG_TKIP ||
+		     ext->alg == IW_ENCODE_ALG_CCMP))
+			ext->ext_flags |= IW_ENCODE_EXT_TX_SEQ_VALID;
+
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(ieee80211_wx_set_encodeext);
+EXPORT_SYMBOL(ieee80211_wx_get_encodeext);
+
+EXPORT_SYMBOL(ieee80211_wx_get_scan);
+EXPORT_SYMBOL(ieee80211_wx_set_encode);
+EXPORT_SYMBOL(ieee80211_wx_get_encode);